DEP SPECIFICATION

STANDARD FORMS INDEX

Copyright Shell Group of Companies. No reproduction or networking permitted without license from Shell. Not for resale

DEP 00.00.10.05-Gen.

February 2017

ECCN EAR99

DESIGN AND ENGINEERING PRACTICE

© 2017 Shell Group of companies

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, published or transmitted, in any form or by any means, without the prior
written permission of the copyright owner or Shell Global Solutions International BV.

This document contains information that is classified as EAR99 and, as a consequence, can neither be exported nor re-exported to any country which is under an
embargo of the U.S. government pursuant to Part 746 of the Export Administration Regulations (15 C.F R. Part 746) nor can be made available to any national of such
country. In addition, the information in this document cannot be exported nor re-exported to an end-user or for an end-use that is prohibited by Part 744 of the Export
Administration Regulations (15 C.F.R. Part 744).

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 2

PREFACE

DEP (Design and Engineering Practice) publications reflect the views, at the time of publication, of Shell Global Solutions
International B.V. (Shell GSI) and, in some cases, of other Shell Companies.
These views are based on the experience acquired during involvement with the design, construction, operation and
maintenance of processing units and facilities. Where deemed appropriate DEPs are based on, or reference international,
regional, national and industry standards.
The objective is to set the standard for good design and engineering practice to be applied by Shell companies in oil and
gas production, oil refining, gas handling, gasification, chemical processing, or any other such facility, and thereby to help
achieve maximum technical and economic benefit from standardization.
The information set forth in these publications is provided to Shell companies for their consideration and decision to
implement. This is of particular importance where DEPs may not cover every requirement or diversity of condition at each
locality. The system of DEPs is expected to be sufficiently flexible to allow individual Operating Units to adapt the
information set forth in DEPs to their own environment and requirements.
When Contractors or Manufacturers/Suppliers use DEPs, they shall be solely responsible for such use, including the
quality of their work and the attainment of the required design and engineering standards. In particular, for those
requirements not specifically covered, the Principal will typically expect them to follow those design and engineering
practices that will achieve at least the same level of integrity as reflected in the DEPs. If in doubt, the Contractor or
Manufacturer/Supplier shall, without detracting from his own respons bility, consult the Principal.
The right to obtain and to use DEPs is restricted, and is typically granted by Shell GSI (and in some cases by other Shell
Companies) under a Service Agreement or a License Agreement. This right is granted primarily to Shell companies and
other companies receiving technical advice and services from Shell GSI or another Shell Company. Consequently, three
categories of users of DEPs can be distinguished:
1) Operating Units having a Service Agreement with Shell GSI or another Shell Company. The use of DEPs by these
Operating Units is subject in all respects to the terms and conditions of the relevant Service Agreement.
2) Other parties who are authorised to use DEPs subject to appropriate contractual arrangements (whether as part of
a Service Agreement or otherwise).
3) Contractors/subcontractors and Manufacturers/Suppliers under a contract with users referred to under 1) or 2)
which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said
users comply with the relevant standards.
Subject to any particular terms and conditions as may be set forth in specific agreements with users, Shell GSI disclaims
any liability of whatsoever nature for any damage (including injury or death) suffered by any company or person
whomsoever as a result of or in connection with the use, application or implementation of any DEP, combination of DEPs
or any part thereof, even if it is wholly or partly caused by negligence on the part of Shell GSI or other Shell Company. The
benefit of this disclaimer shall inure in all respects to Shell GSI and/or any Shell Company, or companies affiliated to these
companies, that may issue DEPs or advise or require the use of DEPs.
Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, DEPs shall
not, without the prior written consent of Shell GSI, be disclosed by users to any company or person whomsoever and the
DEPs shall be used exclusively for the purpose for which they have been provided to the user. They shall be returned after
use, including any copies which shall only be made by users with the express prior written consent of Shell GSI. The
copyright of DEPs vests in Shell Group of companies. Users shall arrange for DEPs to be held in safe custody and Shell
GSI may at any time require information satisfactory to them in order to ascertain how users implement this requirement.
All administrative queries should be directed to the DEP Administrator in Shell GSI.

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 3

TABLE OF CONTENTS
1 INTRODUCTION ........................................................................................................ 4
1.1 SCOPE........................................................................................................................ 4
1.2 STANDARD FORMS DISTRIBUTION ........................................................................ 4
1.3 SUMMARY OF MAIN CHANGES ............................................................................... 4
1.4 COMMENTS ON THIS DEP ....................................................................................... 4
2. INDEX ......................................................................................................................... 5
2.1 DESIGN BOOKS ........................................................................................................ 5
2.2 DESIGN CLASS DETAIL TABLES ............................................................................. 5
2.3 ELECTRICAL EQUIPMENT ....................................................................................... 6
2.4 MISCELLANEOUS ..................................................................................................... 6
2.5 PIPING SYSTEMS...................................................................................................... 8
3. REFERENCES ........................................................................................................... 9

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 4

1 INTRODUCTION

1.1 SCOPE
This DEP lists the standard forms applicable to electrical, mechanical and project
engineering.
For requisition/data sheets, refer to DEP 30.10.01.10-Gen.
This is a revision of the DEP dated February 2016; see (1.3) regarding the changes.

1.2 STANDARD FORMS DISTRIBUTION

Shell companies are provided access to the DEP Standard Forms through “Shell DEPs
Online” at https://www.shelldeps.com.
Authorised recipients of the DEPs are entitled to receive the DEPs via configured access to
the “Shell DEPs Online” at https://www.shelldeps.com. The authorised company is
responsible for providing DEPs to their Contractors and Manufacturers.

1.3 SUMMARY OF MAIN CHANGES

This DEP is a full revision of the DEP of the same number dated February 2016.

The standard forms that have changed are marked with a vertical bar (|) in the margin in
(2).

1.4 COMMENTS ON THIS DEP

Comments on this DEP may be submitted to the Administrator using one of the following
options:

Shell DEPs Online Enter the Shell DEPs Online system at

https://www.shelldeps.com
(Users with access to
Shell DEPs Online) Select a DEP and then go to the details screen for
that DEP.
Click on the “Give feedback” link, fill in the online
form and submit.

DEP Feedback System Enter comments directly in the DEP Feedback

(Users with access to System which is accessible from the Technical
Shell Wide Web) Standards Portal http://sww.shell.com/standards.
Select “Submit DEP Feedback”, fill in the online form
and submit.

DEP Standard Form Use DEP Standard Form 00.00.05.80-Gen. to record

(Other users) feedback and email the form to the Administrator at
standards@shell.com.

Feedback that has been registered in the DEP Feedback System by using one of the above
options will be reviewed by the DEP Custodian for potential improvements to the DEP.

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 5

2. INDEX

2.1 DESIGN BOOKS

Number Revision Title

DEP 01.00.03.80-Gen. Sep. 2013 Material balance sheet
DEP 01.00.03.84-Gen. Apr. 2002 Heat exchanger summary sheet
DEP 01.00.03.87-Gen. Aug. 1998 Mixing equipment summary sheet
DEP 01.00.03.88-Gen. Sep. 2013 Separating equipment summary sheet
DEP 01.00.03.89-Gen. Sep. 2013 Column summary sheet
DEP 01.00.03.90-Gen. Sep. 2013 Vessel summary sheet
DEP 01.00.03.91-Gen. Dec. 2007 Reactor summary sheet

2.2 DESIGN CLASS DETAIL TABLES

Number Revision Title

DEP 00.00.07.71-Gen. Sep. 2011 Design class detail table - Boilers
DEP 00.00.07.73-Gen. Sep. 2010 Design class detail table - Coatings
DEP 00.00.07.74-Gen. Sep. 2011 Design class detail table - Distillation
DEP 00.00.07.75-Gen. Feb. 2015 Design classes - Electrical
DEP 00.00.07.76-Gen. Sep. 2011 Design class detail table - Fired heaters
DEP 00.00.07.78-Gen. Feb. 2012 Design class detail table - Heat exchangers / Air coolers

DEP 00.00.07.79-Gen. Sep. 2011 Design class detail table - Heat exchangers - shell & tube

DEP 00.00.07.81-Gen. Feb. 2015 Design classes - Loss prevention

DEP 00.00.07.82-Gen. Sep. 2013 Design classes - Machinery
DEP 00.00.07.83-Gen. Sep. 2010 Design class detail table - Materials of construction

DEP 00.00.07.84-Gen. Feb. 2015 Design classes - Overpressure Protection

DEP 00.00.07.85-Gen. Feb. 2015 Design classes - Piping
DEP 00.00.07.86-Gen. Sep. 2011 Design class detail table - Plant layout
DEP 00.00.07.87-Gen. Feb. 2015 Design classes - PACO
DEP 00.00.07.88-Gen. Sep. 2010 Design class detail table - Pipelines, flow assurance and
subsea
DEP 00.00.07.89-Gen. Feb. 2013 Design classes - Pressure Vessels
DEP 00.00.07.90-Gen. Sep. 2010 Design class detail table - Tanks
DEP 00.00.07.91-Gen. Feb. 2014 Design Class Detail - Utilities Cooling Systems / Cooling Water
Systems
DEP 00.00.07.92-Gen. Feb. 2014 Design Class Detail - Utilities Cooling Systems

DEP 00.00.07.93-Gen. Feb. 2014 Design Class Detail - Utilities Fuel Systems
DEP 00.00.07.94-Gen. Feb. 2014 Design Class Detail - Utilities Heat Transfer Fluids (HTF)
Systems
DEP 00.00.07.95-Gen. Feb. 2014 Design Class Detail - Utilities Instrument Air and Nitrogen
Systems
DEP 00.00.07.96-Gen. Sep. 2011 Design class detail table - Utilities power systems

DEP 00.00.07.97-Gen. Feb. 2014 Design Class Detail - Steam, Boiler Feed Water (BFW) and
Condensate Systems

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 6

Number Revision Title

DEP 00.00.07.98-Gen. Feb. 2017 Design class-Seawater injection facilities

DEP 00.00.07.99-Gen. Feb. 2017 Design class-Produced water treatment and injection facilities

2.3 ELECTRICAL EQUIPMENT

Number Revision Title

DEP 05.00.10.80-Gen. Feb. 2014 Utility data - Electrical
DEP 05.00.54.84-Gen. Jun. 2007 Summary of electrical engineering
DEP 33.64.10.80-Gen. Jan. 2010 Cost comparison for on-plot cable routing
DEP 33.67.01.80-Gen. Jun. 2007 Schedule for LV switchboard
DEP 33.67.01.81-Gen. May 2002 Schedule for lighting distribution switchboard

DEP 33.67.01.82-Gen. Jun. 2007 Schedule for AC instrument distribution switchboard

DEP 33.67.20.80-Gen. Nov. 2002 Schedule for DC instrument distribution switchboard

DEP 33.67.34.80-Gen. May 2002 Schedule for remote control unit/safety switch

DEP 33.67.51.80-Gen. Dec. 2005 Schedule for high-voltage switchgear and control gear
assemblies
DEP 33.68.30.80-Gen. Feb. 2001 Trace heating systems
DEP 63.10.08.91-Gen. Feb. 2015 Inspection and testing forms

2.4 MISCELLANEOUS

Number Revision Title

DEP 00.00.03.82-Gen. Feb. 2017 Compatibility checklist
DEP 00.00.05.81-Gen. Feb. 2014 DEP comment round form
DEP 05.00.50.82-Gen. May 2002 Specification of design and engineering documents

DEP 05.00.51.81-Gen. Aug. 2000 List of data/requisitions and requisitions

DEP 05.00.51.82-Gen. May 2002 List of supplier's drawings
DEP 05.00.51.83-Gen. May 2002 List of design and engineering drawings
DEP 05.00.54.81-Gen. May 2006 Approval drawing specification (ADS)
DEP 05.00.54.82-Gen. May 2002 Final drawing specification (FDS)
DEP 30.00.00.80-Gen. May 2002 Equipment record card - General
DEP 30.00.60.80-Gen. Sep. 2011 Human factors engineering - Valve criticality ratings

DEP 30.00.60.81-Gen. Dec. 2009 Human factors engineering - Skid screening examples

DEP 30.00.60.82-Gen. Feb. 2012 Checklist for control room design

DEP 30.10.02.90-Gen. Feb. 2012 Material substitution procedure - Request for material
substitution
DEP 30.10.73.80-Gen. Sep. 2011 Pipe and crossing report
DEP 30.10.73.81-Gen. Sep. 2011 Cathodic protection status survey

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 7

Number Revision Title

DEP 30.10.73.82-Gen. Feb 2017 Installation checklist for rectifiers
DEP 30.10.73.83-Gen. Feb 2017 Installation checklist for impressed current surface ground bed
DEP 30.10.73.84-Gen. Feb 2017 Installation checklist for impressed current deep well ground
bed
DEP 30.10.73.85-Gen. Feb 2017 Installation checklist for underground sacrificial anode bed
DEP 30.75.10.80-Gen. Feb. 2015 Checklist for heat recovery steam-generator

DEP 30.75.10.81-Gen. Feb. 2016 Water-tube boiler checklist

DEP 31.21.01.80-Gen. May 2002 Equipment record card - Heat exchanger shell

DEP 31.21.01.81-Gen. May 2002 Equipment record card - Tube bundle

DEP 31.21.01.82-Gen. May 2002 Equipment record card - Barometric condenser vacuum
equipment
DEP 31.21.01.83-Gen. Feb 2017 Shell and tube heat exchanger checklist
DEP 31.21.70.80-Gen. May 2002 Equipment record card - Air-cooled heat exchanger

DEP 31.21.70.81-Gen. Feb 2011 Air-cooled heat exchanger - Checklist

DEP 31.21.70.82-Gen. Feb. 2014 Design synopsis checklist for air-cooled heat exchangers

DEP 31.22.00.80-Gen. May 2002 Equipment record card - Columns

DEP 31.22.00.81-Gen. May 2002 Equipment record card - Pressure vessel
DEP 31.22.10.41-Gen. Feb. 2014 Full manufacturing report
DEP 31.22.10.42-Gen. Feb. 2014 Abridged manufacturing report
DEP 31.24.00.80-Gen. Nov. 2002 Equipment record card - Fired steam boiler
DEP 31.24.00.81-Gen. May 2002 Equipment record card - Furnace
DEP 31.24.00.82-Gen. Feb 2011 Fired heater checklist
DEP 31.24.00.83-Gen. Feb. 2014 Post combustion NOx control for fired equipment checklist

DEP 31.24.48.80-Gen. May 2002 Equipment record card - Air preheater

DEP 31.27.00.80-Gen. May 2002 Equipment record card - Conveyor/elevator
DEP 31.27.04.80-Gen. May 2002 Equipment record card - Weighing equipment

DEP 31.27.10.80-Gen. May 2002 Equipment record card - Mixing equipment

DEP 31.27.21.80-Gen. Feb. 2013 General configuration, enclosed vacuum drum filter

DEP 31.29.00.80-Gen. May 2002 Equipment record card - Gear box

DEP 31.29.02.80-Gen. May 2002 Equipment record card - Centrifugal pump
DEP 31.29.12.80-Gen. May 2002 Equipment record card - Reciprocating pump

DEP 31.29.22.80-Gen. May 2002 Equipment record card - Rotary displacement pump

DEP 31.29.32.80-Gen. May 2002 Equipment record card - Axial pump

DEP 31.29.40.80-Gen. May 2002 Equipment record card - Centrifugal compressor-blower

DEP 31.29.43.80-Gen. May 2002 Equipment record card - Reciprocating compressor

DEP 31.29.47.80-Gen. May 2002 Equipment record card - Fan

DEP 31.29.53.80-Gen. May 2002 Equipment record card - Reciprocating vacuum pump

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 8

Number Revision Title

DEP 31.29.56.80-Gen. May 2002 Equipment record card - Rotary vacuum pump

DEP 31.29.60.80-Gen. May 2002 Equipment record card - Steam turbine

DEP 31.29.70.80-Gen. May 2002 Equipment record card - Gas turbine
DEP 31.29.80.80-Gen. May 2002 Equipment record card - Internal combustion engine

DEP 31.29.85.80-Gen. May 2002 Equipment record card - Steam engine

DEP 31.36.90.50-Gen. May 2002 Equipment record card - Safety relief valves

DEP 32.31.00.81-Gen. Dec. 2008 Level calculation spreadsheet

DEP 32.37.10.80-Gen. Feb. 2014 Component list for instrument impulse lines (SI units)

DEP 32.37.10.81-Gen. Feb. 2014 Component list for instrument impulse lines (USC units)

DEP 33.66.05.80-Gen. May 2001 Equipment record card - Electric motor

DEP 34.51.00.80-Gen. Nov. 2003 Equipment record card - Fixed roof tank
DEP 34.51.00.81-Gen. Nov. 2003 Equipment record card - Floating roof tank
DEP 34.51.00.82-Gen. Nov. 2003 Equipment record card - Spherical pressure tank

DEP 34.51.00.83-Gen. Nov. 2003 Equipment record card - RLG tank

DEP 34.51.01.80-Gen. Sep. 2013 Schedule of tank appurtenances - API 12F Tanks

DEP 35.00.00.80-Gen. Feb. 2014 Towing Log

DEP 35.00.00.81-Gen. Feb. 2014 Towed-or transported marine object (template)

DEP 35.00.00.82-Gen. Feb. 2014 Tow plan verification statement

DEP 39.01.10.80-Gen. Sep. 2012 Materials requiring specific approval (upstream facilities)

DEP 59.01.10.80-Gen. Feb. 2014 Data criticality assessment

DEP 80.45.11.80-Gen. Feb 2011 Flare details checklist

2.5 PIPING SYSTEMS

Number Revision Title

DEP 31.38.00.80-Gen. Feb. 2012 Equipment Record card - Pipelines
DEP 31.38.00.81-Gen. Feb. 2012 Calculation sheet for pipe support loads
DEP 31.38.01.43-Gen. Feb. 2015 Index to piping material classes
DEP 31.38.01.84-Gen. Feb. 2015 Piping classes - service and materials selection index

DEP 31.38.01.53-Gen. Feb. 2017 Cross reference for piping classes - PIP basis

DEP 31.38.01.54-Gen. Feb. 2016 Cross reference for piping classes - ESTG basis

DEP 31.38.01.85-Gen. Feb. 2015 Piping classes CSA Z662 - service and materials selection
index

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41
ECCN EAR99 DEP 00.00.10.05-Gen.
February 2017
Page 9

3. REFERENCES
In this DEP, reference is made to the following publications:
NOTES: 1. Unless specifically designated by date, the latest edition of each publication shall be used,
together with any amendments/supplements/revisions thereto.
2. For Shell users, DEPs, requisitions, standard forms and standard drawings are available on the
Shell Wide Web, at address http://sww.shell.com/standards.

SHELL STANDARDS
DEP feedback form DEP 00.00.05.80-Gen.
Requisitions index DEP 30.10.01.10-Gen.

This document has been supplied under license by Shell to:

UOP Honeywell ted.fuger@honeywell.com 19/01/2018 05:43:41