Punjab General Industries Private Limited Doc No CH-SMS-11

Raw Material Specification Rev no 00

As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
60% Min. on 60% Scale
Cr
Prorata Basis
C 6.00-8.00%
High carbon
Si 01 Mt 4.% max
Ferro Chrome(HC Fe
(1) P /50Kg .040 % Max
Cr)
S plastic bag 0.050%Max.
Slag Not Allowed
10-150 (size(-10= 5% Max,+150 mm-5.0%
Size
max)
Cr 60% on scale Prorata basis
C .10% Max accepted up to .11%
Si 2.00% Max
Low carbon 01 Mt
P .040 % Max
(8) Ferro –Chrome(LC /50Kg
S .040 % Max
Fe Cr) plastic bag
Slag Not allowed
Size 10-100 ( (-10= 5% Max,+150 mm-5.0%
Size(mm)
max)
Si a) 65-70% grade 0%
b) 70-75% grade %
01 Mt
c) 75-80% grade %
Ferro Silicon /50Kg
(15) Slag Not allowed
(Regular) plastic bag/
Size 10-150 ( (-10= 5% Max,+150 mm-5.0%
Size(mm) Jute bag
max)
Powder <3 mm -5% Max
Si a) 65-70% grade %
b) 70-75% grade %
01 Mt
c) 75-80% grade %
Ferro Silicon /50Kg
(19) Al 0.50 % Max
( Low aluminum) plastic bag/
Slag Not allowed
Jute bag
Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size(mm)
max)
Mn 70% Min grade
C 50 Kg 6-8%
High carbon P Plastic 0.350% Max
(23)
Ferro Manganese Slag bag/Jute Not allowed
Bag Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size (MM)
max
(28) Low carbon Mn 70% Min grade
√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 1 of 6
 Punjab General Industries Private Limited Doc No CH-SMS-11
Raw Material Specification Rev no 00
As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
C .10% Max
50 Kg
P 0.350% Max
Plastic
Ferro Manganese Slag Not allowed
bag/Jute
Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size (MM) Bag
max)
Mn
Medium carbon 70% Min grade
Ferro Manganese
C
2 % max
50 Kg
P Plastic
(33) 0.350% Max
bag/Jute
Slag Bag
Not allowed
Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size (MM)
max)
Silico- Manganese Mn 60% Min
(Regular) Si 14% Min
C 50 Kg 2.50%Max
P Plastic 0.350% Max
(38)
Slag bag/Jute Not allowed
Bag
Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size (MM)
max)
Mn 55-60% Min
Si 30-35%
50 Kg
C .10%Max
Silico- Manganese Plastic
(44) P .150% Max %
(Low Carbon)) bag/Jute
Slag Not allowed
Bag
Size 10-150 ( (-10= 5% Max,+150 =5.0%
Size (MM)
max)
Ti 50 Kg 30% Min
Ti Plastic 70% Min
(50) Ferro Titanium
Slag bag/Jute Not allowed
Size (MM) Bag 10-100 mm
50% Min ( Prorata Base) no tolerance
V
accepted.
(54) Ferro Vanadium Steel Drum
Slag Not allowed
Size (MM) 10-100(-10= 5% Max,+100 =5.0% max)
√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 2 of 6
 Punjab General Industries Private Limited Doc No CH-SMS-11
Raw Material Specification Rev no 00
As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
60% Min.( Prodata Base) no tolerance
Mo
accepted
(57) Ferro Molybdenum Steel Drum
Slag Not allowed
Size (MM) 10-100 ((-10= 5% Max,+100 =5.0% max)
Ca 30% Min
Calcium silicied Si Coil with 55-60%Max
(60)
wire /lumps Slag steel wrap. Not allowed
Size (MM) 20-60(Lumps), 13 (Wire)
(64) Nickel plate Ni 99% Min. Size 4”x4”
(65) Aluminum Bar Al 97% Min per pcs weight 1.00- 2.00 kg,
Packing in
(66) Aluminum Wire Al 99% Min size 09 mm
Jute/Plasti
98% Min
(67) Aluminum shorts Al c bags
(68) Aluminum granules Al 95% Min
SiO2 2.00 % Max
CaO 85.00% Min
MgO 3.00% Max
Lime
Powder Plastic 5% Max below 5 mm visual inspection.
(69)
Uncalcined bags 5% Max visual inspection.
S .50 Max
LOI 7.00%Max
Size(in MM 10-70
LOI Plastic 5.00%Max
SiO2 bags 3.00 % Max
(75) Calcined dolomite Ca O 50% Min.
Mg O 35 % min
Size (MM) 10-100 (-10=5%Max,+100-5% max)
LOI 5.00% Max
SiO2 Plastic 3.00 % Max
(80) Dolofit
CaO bags 50 % Min
MgO 30 Min
MgO 84% Min
Magnetite Ramming SiO2 Plastic 8% Max
(84)
Mass P bags 0.050% Max
CaO 1.5% Max
(88) SiO2 98.50 Min
Silica Raming Mass Fe2O3 98.50 Min
Size 0-5 Mm (-1 mm-30.0% max)
√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 3 of 6
 Punjab General Industries Private Limited Doc No CH-SMS-11
Raw Material Specification Rev no 00
As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
MgO 65 % Min.
Plastic
(90) Basic spray mass Sio2 30% Max
bags
LOI 5.00% Max
Sio2 3.00%
CaO Plastic 28-30%
(93) Dolomite chips
MgO bags 18-20
Size (mm) 2-8mm
a) 90.O% Min
Ca F2 Plastic
(97) Flour spar b) 50% Min
bags
Size (mm) 10-100 (MM)
SiO2 10% Max
Plastic
(99) Synthetic slag Al2O3 70% Min
bags
C 5% Min
SiO2 10.0% Max
Al (M) 15-20%
Plastic
(102) Aluminum mix Al 2O3 50-55%
bags
Moisture 1.0 % Max
C 2.0%Max 20%
Moisture Nil
Coverex-100 (LC Plastic
(107) C 1.50% Max %
Radex) bags
S .050 Max %
Moisture Nil
Neutral Redex (LCC- SiO2 Plastic 15.00 Max
(110)
70) Al2O3 bags 70.00%Min
LOI 5% Max
Plastic
Neutral Redex (LCC- Moisture Nil
(114) bags
65)
Al2O3 65.00%Min
Plastic
(116) Manganese metal Mn 99.00% Min
bags
Moisture .50%Max
Plastic
(117) Nut Coke VM 5.00 Max
bags
C 65.00 Min %
Moisture 5.00% Max %
Volatile
(120) Hard Coke loose 3.00% Max
matter
Carbon 55.00% Min %
(123) Met Coke Moisture 1.00% Max 5%
√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 4 of 6
 Punjab General Industries Private Limited Doc No CH-SMS-11
Raw Material Specification Rev no 00
As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
Volatile
Plastic 3.00% Max
matter
bags
Carbon 65.00% Min
Moisture .50%
V.M 1.00% %
Plastic
(126) C.P.C Ash 1.00 max %
bags
Fixed
98% Min
Carbon
Fe 60 % Min %
(130) Iron Ore NA
SiO2 25 Max
Coal based Gas based
carbon .50 max 2.00% Max
Sulphur .050max % --
Phosphoro Plastic
(132) Sponge iron .050max % --
us bags
80.00 Min (+/-
Fe (M) 85% Min (+/-1)
1.0)
N.M 1.00Max 1.00Max
Vertical
Sulphur cored
(138) S coil steel 98% Min size 13 mm
wire/Raw Sulphur
wrapped
Flash point 66C min C
Moisture 1.00 % Max %
(139) Furnace Oil Ash NA .10% Max
Viscosity 500 Cst Max at 50C C
Density .890-.950 Gm/Ml
Moisture .05 % Max
Density .80-.85 Gm/Ml
(144) High speed diesel NA
Flash point 65C %
Ash .02% Max %
(148) LDO Moisture NA .25 % Max
Density .850-.890 Gm/ /ml
Flash point 66 C C
Ash .02% Max %
Plastic
(152) Nozzlex (Normal) Density 2.30 gm/cc Min 5%
bags
Plastic Zr02 = 45% min
(153) Nozzlex(zro2) base Density
bags 2.80 gm/cc Min %
√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 5 of 6
 Punjab General Industries Private Limited Doc No CH-SMS-11
Raw Material Specification Rev no 00
As per ISO 9001:2015 & IATF 16949:2016 Rev Date 12.03.2021

Parameter Packing
Sr to Requirem
Material Requirement & acceptance criteria
No be ent (if
checked Any)
Carbon 4.50% max %
Manganes
0.30% min %
e
(154) Pig Iron NA
Silicon 0.50% min %
Sulphur &
0.30% Max %
Phos
(158) Refractories :

NOTE:1.0 in ferro alloy tolerance accepted up to .50%(if party always dispatch the material less than .
50%.accepted one times next time deduct with double penalty or stop the supply.
2.0 on prorate basis ferro alloys tolerance not accepted.
(1) Other Elements of any material shall be analysed as per the instruction received from user department
from time to time.

(2) Packing of material needs ok as per requirement of material

√ Master Copy √ Controlled Copy Uncontrolled Copy Obsolete Copy

Prepared by : Engineer QA Controlled by: QMS-MR Approved by: Head QA

Page 6 of 6