Two-Component Polyurethane Adhesive (CPB 001) : A: B 100: 20 by Weight A: B 100: 25 ÷ 27 by Volume

CEL Components S.r.l.
ENG
Via Ca’ dell’Orbo Sud 4 - 40055 Castenaso (Bologna) Italy
Tel. +39 051 782505 Fax +39 051 782477
www.cel.eu info@cel.eu
P.IVA 04102600378 CCIAA BO 0339628
ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS
TWO-COMPONENT POLYURETHANE ADHESIVE

TWO-COMPONENT POLYURETHANE ADHESIVE (CPB 001)
1. Description:
Two-component polyurethane, filled, semi rigid, low viscosity, one-hundred percent free of solvents.
Good adhesive properties, waterproof and resistant to mechanical stress.
2. Applications:
Adhesive for materials of differing or similar properties.

Suitable in the construction of honeycomb sandwich panels, and in expanding materials such as
polyurethane, foam, etc; skin material can be metal, glass, laminated plastic, wood, fiberglass,
aluminum…
3. Use
3.1. Packaging
A: Container/small metal container kg 250/ 25
B: Container/small metal container kg 250/ 14
Note - Different amounts per container can be supplied upon request
The mixing ratio between the components must be followed as specified.
3.2. Mix
Until perfectly homogenous
3.3. Mixing Ratio
A : B = 100 : 20 by weight
A : B = 100 : 25 ÷ 27 by volume
3.4. Temperature Range for application
+10 / +35°C
At lower temperatures and at high humidity levels the curing of the product will not be optimal.
3.5. Storage
In hermetic bins at a temperature of 23°C, 6 months

It is recommended to check for sedimentation in the containers before use, in case of sedimentation, remix.
Avoid exposing to moisture and to prolonged contact with the air.
3.6. Equipment cleaning
Tools/Equipment can be cleaned with suitable solvent, turpentine, nitric thinner or varnish remover.
4. Warnings
The surface must be free of moisture, dust, grease, or oils.

Last Revised: 05/19_Rev.1
LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their
potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application.
We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.
CEL Components S.r.l.
ENG
Via Ca’ dell’Orbo Sud 4 - 40055 Castenaso (Bologna) Italy
Tel. +39 051 782505 Fax +39 051 782477
www.cel.eu info@cel.eu
P.IVA 04102600378 CCIAA BO 0339628
ALUMINIUM AND THERMOPLASTIC HONEYCOMBS, LAMINATES, SANDWICH PANELS
TWO-COMPONENT POLYURETHANE ADHESIVE

5. Properties
Component A (CPB 001)

Characteristics Method Units Value
Specific weight at 23 ± 2°C ASTM D 1475/60 g/ml 1,62 ÷ 1,65
Viscosity at 25 ± 2°C ASTM D 2393 mPa∙s 15.000 ÷ 25.000
Color - - beige
Appearance - - liquid paste
Component B (CPB 001)

Specific weight at 23 ± 2°C ASTM D 1475/60 g/ml 1,20 ÷ 1,25
Viscosity at 25 ± 2°C ASTM D 2393 mPa∙s 350 ± 50
Color - - Dark brown
Appearance - - liquid
Components A and B Mixed

Pot life at 25 ± 2°C (200 cc A+B) - minutes 30 ÷ 35
Open time at 25 ± 2°C (thickness 1mm) - minutes 75 ÷ 95
Gel Time at 25 ± 2°C thickness 1mm) - minutes 170 ÷ 200
Minimum Temperature Application - °C +10
Initial Hardening at 25°C - hours 8 ÷ 10
Time to reach full cure, 25 °C - days 5÷7
Coverage - g/sqm 150 ÷ 350
Components A and B, final characteristics after full cure hasbeen reached

Color - - beige
Density at 20°C ASTM D 792 g/ml 1,56 ÷ 1,58
Traction Tensile strength (aluminum-aluminum) ASTM D-1002 MPa 5÷7
6. Hygiene
When working with polyurethane resins and other isocyanate hardeners, all regulations regarding hygiene and safety, glove use, safety
goggles, and suitable clothing must be strictly followed. Dispose of waste materials in accordance with the laws in force.
Do not release waste materials into the storm sewers. For further information, please see the material safety data sheet.
Last Revised: 05/19_Rev.1
LIABILITY DISCLAIMER: The above data are to the best of our knowledge correct and are intended to give information about our products and their
potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application.
We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

Two-Component Polyurethane Adhesive (CPB 001) : A: B 100: 20 by Weight A: B 100: 25 ÷ 27 by Volume

Uploaded by

Copyright:

Available Formats

Two-Component Polyurethane Adhesive (CPB 001) : A: B 100: 20 by Weight A: B 100: 25 ÷ 27 by Volume

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Two-Component Polyurethane Adhesive (CPB 001) : A: B 100: 20 by Weight A: B 100: 25 ÷ 27 by Volume

Uploaded by

Copyright:

Available Formats

CEL Components S.r.l.

TWO-COMPONENT POLYURETHANE ADHESIVE

Adhesive for materials of differing or similar properties.

B: Container/small metal container kg 250/ 14

Note - Different amounts per container can be supplied upon request

The mixing ratio between the components must be followed as specified.

Until perfectly homogenous

3.3. Mixing Ratio

3.4. Temperature Range for application

In hermetic bins at a temperature of 23°C, 6 months

3.6. Equipment cleaning

The surface must be free of moisture, dust, grease, or oils.

TWO-COMPONENT POLYURETHANE ADHESIVE

Component A (CPB 001)

Component B (CPB 001)

Components A and B Mixed

Components A and B, final characteristics after full cure hasbeen reached

You might also like