Model 1004

Tedea-Huntleigh

Aluminum Single-Point Load Cell

FEATURES
• Capacities 0.3–3 kg
• Aluminum construction
• Single-point 200 x 200 mm platform
• IP66 protection
• Total error better than 0.0067% of R.O.
• OIML approved

APPLICATIONS
• Low capacity scales This load cell is suitable for applications including
• Precision scales jewelery scales, analytical balances, medical equipment,
medical and pharmaceutical research and low-level force
• Jewelry scales measurement.
• Pharmaceutical scales
The Model 1004 offers up to 30000 divisions short-term
precision at stable room temperature. A special two-stage
DESCRIPTION humidity resistant protective coating assures long-term
Model 1004 is a very low capacity, very high precision reliability.
single-point load cell designed for direct mounting in low An overload protection device can be easily included in
capacity scales and precision balances. the application design. A threaded hole is provided in the
loading end of the load cell for this purpose.

OUTLINE DIMENSIONS in millimeters

Document No.: 12002 Technical contact: vpgt.americas@vpgsensors.com, www.vpgtransducers.com

Revision: 13-Apr-2015 vpgt.asia@vpgsensors.com, and vpgt.emea@vpgsensors.com 1
Model 1004
Tedea-Huntleigh

Aluminum Single-Point Load Cell

SPECIFICATIONS
PARAMETER VALUE UNIT
Accuracy class C3 GW HW JW
Rated capacity—R.C. (Emax) 0.3, 0.4, 0.6, 1.2, 1.5, 3.0 kg
Rated output—R.O. 0.9 mV/V
Rated output tolerance 0.1 ±mV/V
Zero balance 0.04 ±mV/V
Zero return, 2 minutes 0.01 0.0055 0.0033 ±% of applied load
Zero return, 30 minutes 0.017 ±% of applied load
Total error (per OIML R60) 0.02 0.01 0.0067 0.0067 ±% of rated load
Temperature effect on zero 0.004 0.004 ±% of rated output/°C
Temperature effect on output 0.001 0.002 ±% of load/°C
Eccentric loading error 0.0033 ±% of rated load/cm
Temperature range, compensated +5 to +45 °C
Temperature range, safe –30 to +70 °C
Maximum safe central overload 150 % of R.C.
Ultimate central overload 250 % of R.C.
Excitation, recommended 10 VDC or VAC RMS
Excitation, maximum 15 VDC or VAC RMS
Input impedance 415 ±20 Ω
Output impedance 350±3 Ω
Insulation resistance >2000 MΩ
Humidity range, safe <60 %
Cable length 0.4 m
Cable type 4 wire, PVC, spiral shield
Construction Aluminum
Environmental protection IP66
Platform size (max) 200 x 200 mm
Recommended torque 2.0 N*m
Humidity Range, Safe <60 %
All specifications subject to change without notice.

WIRING SCHEMATIC DIAGRAM

(Balanced bridge configuration)
+VE INPUT (GREEN)

+VE OUTPUT (RED)

–VE INPUT (BLACK)

–VE OUTPUT (WHITE)

www.vpgtransducers.com Technical contact: vpgt.americas@vpgsensors.com, Document No.: 12002

2 vpgt.asia@vpgsensors.com, and vpgt.emea@vpgsensors.com Revision: 13-Apr-2015
 Legal Disclaimer Notice
Vishay Precision Group, Inc.

Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in
any other disclosure relating to any product.

The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but
not limited to, the warranty expressed therein.

VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase.
To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the
application or use of any product, (ii) any and all liability, including without limitation special, consequential or
incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose,
non-infringement and merchantability.

Information provided in datasheets and/or specifications may vary from actual results in different applications and
performance may vary over time. Statements regarding the suitability of products for certain types of applications
are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s
responsibility to validate that a particular product with the properties described in the product specification is suitable for
use in a particular application. You should ensure you have the current version of the relevant information by contacting
VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any
conduct of VPG.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise
expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do
so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale.
Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such
applications.

Product names and markings noted herein may be trademarks of their respective owners.

Copyright Vishay Precision Group, Inc., 2014. All rights reserved.

Document No.: 63999 www.vpgsensors.com

Revision: 15-Jul-2014 1