THE DESTINATION CONTROL

SYSTEM FOR OPTIMIZED

PEOPLE FLOW

KONE Destination
 KONE DESTINATION
– AN EFFORTLESS ELEVATOR
EXPERIENCE
Imagine smart, easy-to-use-elevators in better organized
lobbies. Imagine orderly boarding, uncrowded cars, shorter
travel times, and fewer unnecessary stops. KONE Destination
makes all of this a reality. Simply select a destination floor
and enjoy the perfect elevator experience.

Unlike conventional elevator control systems, which only

register the desired travel direction, the KONE Destination
– is a destination control system that incorporates desired
destination floors and the number of waiting passengers to
significantly improve elevator efficiency and convenience.

This additional information leads to increased handling

capacity, shorter journey times, fewer intermediate stops,
and enhanced passenger comfort.

The significantly improved system performance is most evident

during intense traffic periods and rush hours, when traditional
control systems struggle to cope with the high volume of traffic.

Efficiency, comfort, and security

KONE Destination brings benefits for all building stakeholders
in all types of buildings, from large office buildings to hotels
and residential complexes:
n Increased efficiency for building owners
n Increased comfort and reduced journey times for passengers
n Increased security and peace of mind for residents

KONE DESTINATION CAN BE CONFIGURED

TO MEET YOUR NEEDS:
n Two configurations – hybrid and traditional
destination control systems – are available
depending on the visual, user-experience, and
performance requirements of your elevator
system
n We offer a range of technological solutions to fit
building type and hight, as well as security and
architectural needs

2
3
 MORE FOR PASSENGERS
THROUGHOUT THEIR JOURNEY
More handling capacity Easier accessibility
The handling capacity of the elevator group is improved, For people who need more time and space, an
especially during peak traffic periods such as the morning accessibility function can be activated with a card reader
up-peaks common in office buildings. or a special button. This gives passengers more time to
reach the car, longer door dwell times, and, because fewer
Less waiting, fewer intermediate stops people will be assigned to that car, more space as well.
KONE Destination uses the information on the number
of travelers and their destination floors to group together More personalization
passengers with the same destination, leading to shorter KONE Destination can be personalized to further increase
transit times and fewer intermediate stops. passenger comfort. User-specific door times, automatic call
allocation to passengers’ home floors, and audible passenger
Improved comfort guidance all help make the KONE Destination experience
Because passengers choose their destination floor before a uniquely personal one.
entering the elevator, they don’t need to struggle through a
crowd to press a button inside the elevator car. And because Enhanced guidance
the system knows the journey time from the operating panel The optional elevator destination indicator shows
to the car, passengers can take their time walking to their the selected destination floors. Only destinations from
assigned elevator. a passenger’s departure floor are shown, enabling them
to quickly recheck that they are entering the right car.
Better security
KONE Destination enables the elevator system to be More space
integrated with the building’s access control system. Because KONE Destination assigns the correct number
Occupants can use access cards and PIN codes, of passengers to each elevator and each car only serves
restricting unauthorized use of elevators significantly a specific range of floors, cars are much less likely to
and adding to the security of the entire building. become crowded.

4
ALL IT TAKES IS
THREE SIMPLE STEPS

1 SELECT FLOOR OR
SHOW YOUR CARD
Choose your destination floor at
2 FIND YOUR
ELEVATOR
Move to the elevator that has
3 ENJOY YOUR
JOURNEY
Enjoy a quick ride in a
the operating panel, via our mobile been assigned to you. As you uncrowded car. The next-
application or show your access card approach, you can see which stop indicator on the car
at the turnstile. The display will tell one is yours by checking to operating panel displays the
you which elevator you have been the identifier above each stops the elevator will make.
assigned to. elevator.

5
 KONE DESTINATION – SIMPLY
A BETTER WAY TO TRAVEL
With conventional collective
control systems, passengers
wait in a crowd then rush
into the first car that arrives.
They also crowd around
the car operating panel to
select their destination floor.
Those traveling to higher
floors are delayed by several
intermediate stops.

With KONE Destination

passengers select their
destination before entering
the lobby area and are
guided directly to the
dedicated car. A limited
number of other passengers
within a specific range of A B C D
floors are assigned to the
same car. Boarding is calm 1 2 3
4 5 6
7 8 9
1 2 3
4 5 6
7 8 9

and orderly, and travel times H G F E

0 0

are minimized.

The KONE Destination DESTINATION CONTROL CONVENTIONAL

minimizes the number SYSTEM FULL COLLECTIVE CONTROL
of intermediate stops
by grouping passengers
intelligently. This leads to
shorter journey times and
better handling capacity
compared to conventional
full collective elevator
systems.

6
INNOVATIVE TECHNOLOGY,
ATTRACTIVE DESIGNS
Multiple ways to call the elevator
After the location and exterior, the main lobby and KONE Destination combines innovative technology
elevators are the most important elements in a with attractive signalization alternatives. This combination
building’s character. increases comfort and security, and enhances architectural
freedom and the visual appearance of your building’s
Our user-friendly, integrated solutions are designed to lobby.
make it easy for people to move throughout your building.

Our KSP 853 is an attractive, surface-mounted destination Our KSP 858 destination operating panel incorporates capacitive
operating panel featuring traditional buttons. touchscreen technology and a highly intuitive interface for an
effortless elevator experience.

KONE RemoteCall is an innovative mobile application for smartphones. Alternatively, receptionist can use RemoteCall on tablet to call
The clear, easy-to-use interface allows users to make personalized elevators for visitors.
elevator calls quickly and conveniently from anywhere in the building.

With KONE Destination system turnstiles can be integrated with the

elevators, so elevator call can be made automatically from turnstiles
when users show their access card.

7
 INCREASED CAPACITY, SHORTER
JOURNEY TIMES
KONE Destination uses artificial intelligence to learn and Depending on the number of cars in the group, the
forecast a building’s traffic flows. When traffic intensity changes, car capacity, and the number of floors in the building,
the control system assesses the changing traffic patterns and KONE Destination can increase the handling capacity
alters its optimization routines accordingly. During lighter of an elevator group by 20–100% during heavy up-
traffic periods, passenger waiting times or elevator energy peak traffic. In extreme cases the selection of KONE
consumption can be optimized, while during heavy traffic Destination in the planning phase can eliminate one
periods the elevator handling capacity is increased. elevator from the group increasing the rentable space
in the building.
KONE Destination uses our industry-leading group control
technology, which features several software innovations and This increase in handling capacity is not achieved at
artificial intelligence forms: the expense of in-car comfort. With KONE Destination,
car load factors, which represent how full the cars
n Traffic forecasting learns from historical elevator data to are, remain low compared to elevator groups using a
forecast upcoming traffic and proactively change elevator conventional control system, even during heavy traffic
group behavior periods.
n Fuzzy logic identifies the state of the current traffic
situation, so that the elevator control system can react Compared to typical destination control systems
accordingly and conventional elevator control systems, KONE
n The genetic algorithm calculates which elevator is the Destination cuts waiting times throughout the day. The
best choice for each call based on the current situation figure below illustrates how KONE Destination reduces
n Multi-objective optimization adjusts the waiting and waiting times for passengers regardless of traffic flow
travel time based on the current traffic situation intensity.

KONE Destination
% of TRAFFIC PATTERNS IN A TYPICAL OFFICE BUILDING continuously monitors
population/
5 min. the traffic behavior in the
12
building and intuitively
adapts to different traffic
10 patterns in order to provide
Outgoing
the optimum service at all
8 times.

6
Interfloor
4

0
Incoming

KONE Destination combines

Time (s) AVERAGE WAITING TIMES short waiting times with
90 low car load factors. In
88
traditional control systems
80 75
waiting times tend to
70 increase exponentially
60 66
when traffic intensity
50
increases over a critical
55 point, whereas KONE
40
37
Destination can handle
30 much higher traffic. Built-
33
20 in artificial intelligence
72 allows KONE Destination
10 24 62
13 22 to detect periods of light-
0 Traffic normal traffic intensity and
Light Normal Heavy Intense intensity
adjust the operating mode
Traffic intensity accordingly in order to
(car load factors shown on curves)
optimize waiting times.
KONE Destination Conventional control

8
TAILOR THE SYSTEM TO THE
INDIVIDUAL NEEDS OF YOUR BUILDING
KONE Destination is available in two configurations – hybrid or traditional

Hybrid configuration
4 With the hybrid configuration, the
destination operating panels are
located only on the main floors, while
other floors have conventional landing
signalization. Cars have a conventional
2
car operating panel.

This configuration is particularly

beneficial in the buildings with big
inter-floor traffic and for improving
3 traffic flow from heavily used floors
like the main entrance floor. It is very
useful in buildings with heavy up-peaks
5 and buildings with large mid-building
1 restaurants.

For modernization projects, this

configuration is a highly cost-effective
way to improve traffic flow in buildings
with up-peak deficiencies.

1 Destination operating panel on main floor 4 Standard hall lantern on other floors
2 Standard landing call station on other floors 5 Standard car operating panels with
3 Elevator identifier on main floor car call buttons

Traditional configuration
With the traditional configuration, the
2
destination operating panels are on
3 all floors and consequently there are no
buttons on the car operating panel.

As the system receives complete

1
passenger origin and destination
information from all floors, it is able
to provide the best service for all traffic
conditions – the up-peak, the lunchtime
rush, and the down-peak, as well as
2 quieter periods.
3
This system is recommended for more
4 complex buildings, for example:
n where not all elevators serve the
1
same floors
n with complex lobby arrangements
(more than elevators in a row,
circular or L-shaped lobbies)
n with high traffic peaks.
1 Destination operating panels on all floors 3 Destination indicators
2 Elevator identifiers on all floors 4 Car operating panels without car
call buttons

9
 MODERNIZE YOUR BUILDING
FOR BETTER PERFORMANCE
KONE MODERNIZATION OVERLAY TOOL
Building upgrade The process
Whatever phase of its life cycle your building is at – Each elevator is modernized in turn, gradually adding to
whether it is facing competition from newer neighbors, the number of new elevators and increasing people flow
going through major changes in usage or service capacity. With conventional modernization, handling
requirements, or experiencing an increase in tenants – capacity will decline considerably during the first phases of
KONE is committed to supporting you. the project. The KONE Modernization Overlay Tool maintains
the people flow capacity, increasing it as more elevators
KONE Destination will help you optimize elevator are completed (see graph below). Before modernization of
performance. And thanks to our smooth, staged installation the last elevator, the overlay is removed and the final KONE
process, disturbance and building downtime are minimized. group controller takes full responsibility for call allocation.

During elevator modernization, you might expect people Compatible with old and new
flow capacity to decrease when elevators are out of service The KONE Modernization Overlay can be used with the
or when there are old and new elevator groups operating KONE Destination, with traditional full collective elevator
in the same lobby area. With the KONE Modernization control systems, and also with most types of existing
Overlay Tool, you can eliminate capacity decreases during electrification systems. It is also compatible with elevators
modernization and even increase people flow capacity with a machine room as well as machine-room-less elevators.
during the modernization process.

Improved performance
How it works If the traffic and population in an office building increases,
The KONE Modernization Overlay Tool is a temporary resulting in queuing and long waiting times, KONE Destination
high-level group control tool for use during modernization. will return the service level back to normal or even boost it
Compatible with both old and new elevator systems, its further.
basic function is to allocate landing calls between the new,
modernized elevators and the old elevator system. The tool
gives priority to the new elevators, maximizing the use of
Increased security
elevators with the highest people flow capacity and lowest KONE Destination will also improve the safety of tenants by
energy consumption. Passengers use common destination providing personalized functionality and guidance for users
operating panels for calling both old and new elevators. with special needs. Integration with access control systems
improves your building’s security.

Group handling capacity with and without Modernization KEY BENEFITS

Overlay in destination control system modernization
Improved usability
% n Common landing stations for old and new elevators
150 n Smooth transition from conventional control to
Handling capacity (5HC %)

destination control
100 Increased traffic capacity
n Improves capacity during modernization with

50 benefits of destination control system

KONE Modernization Wide compatibility
Overlay in use n Can interface with most types of existing elevator
0
controls
Under Mod 1 1 1 1 1 1 0
Old lift controls 5 4 3 2 1 0 0 Minimized disturbance
New lift controls 0 1 2 3 4 5 6 n Short installation time

n Minimized downtime when setting up

With Modernization Overlay overlay system
Without Modernization Overlay

Examples of group handling capacity with and without Modernization

Overlay in a destination control system modernization

10
REFERENCES

DOHA TOWER – DOHA, QATAR CAPITAL CITY – MOSCOW, RUSSIA

n Completed: 2012 n Completed: 2010
n Height: 238 m n Height: 302 m and 257 m
n Floors: 46 n Floors: 73 and 62
n 21 elevators n 50 elevators; 6 escalators
n KONE Destination, traditional destination control system n KONE Destination, traditional destination control system

TOUR FIRST – PARIS, FRANCE

n Completed: 2011
n Height: 231 m
n Floors: 51
n 28 elevators; 2 escalators
n KONE Destination, traditional destination control system

11
KONE provides innovative and eco-efficient
solutions for elevators, escalators, automatic
building doors and the systems that integrate
them with today’s intelligent buildings.

We support our customers every step of

the way; from design, manufacturing and
installation to maintenance and modernization.
KONE is a global leader in helping our customers
manage the smooth flow of people and goods
throughout their buildings.

Our commitment to customers is present in

all KONE solutions. This makes us a reliable
partner throughout the life cycle of the
building. We challenge the conventional
wisdom of the industry. We are fast, flexible,
and we have a well-deserved reputation as a
technology leader, with such innovations as
KONE MonoSpace®, KONE NanoSpace™ and
KONE UltraRope®.

KONE employs close to 50,000 dedicated

experts to serve you globally and locally.

KONE CORPORATION

Head office
Kartanontie 1
P.O. Box 8
FI-00331 Helsinki
Finland
Tel. +358 (0)204 751

Corporate offices
Keilasatama 3
P.O. Box 7
FI-02151 Espoo
Finland
Tel. +358 (0)204 751

www.kone.com

This publication is for general informational purposes only and we reserve the right at any time to alter the product design and specifications. No statement this publication contains shall be
construed as a warranty or condition, express or implied, as to any product, its fitness for any particular purpose, merchantability, quality or representation of the terms of any purchase
agreement. Minor differences between printed and actual colors may exist. KONE MonoSpace®, KONE EcoDisc®, KONE Care® and People Flow® are registered trademarks of KONE Corporation.
Copyright © 2016 KONE Corporation.
8258