Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    Flygt DX: Submersible Wastewater & Drainage Pumps, 50Hz

    Uploaded by

    Andrey Gyrych
    The document presents the Flygt DX range of submersible wastewater and drainage pumps. It describes the key features of 11 pump models ranging from 0.55 to 1.5 kW including their discharge sizes, passage sizes for solids, materials, and maximum heads and flows. The pumps have stainless steel bodies and casings, dry motors, twin seal systems, and are suitable for continuous duty transferring dirty, clean, and contaminated water in various applications. Performance curves are provided comparing flow rate and head for some of the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Flygt DX: Submersible Wastewater & Drainage Pumps, 50Hz

    Uploaded by

    Andrey Gyrych
    100 views4 pages
    The document presents the Flygt DX range of submersible wastewater and drainage pumps. It describes the key features of 11 pump models ranging from 0.55 to 1.5 kW including their discharge sizes, passage sizes for solids, materials, and maximum heads and flows. The pumps have stainless steel bodies and casings, dry motors, twin seal systems, and are suitable for continuous duty transferring dirty, clean, and contaminated water in various applications. Performance curves are provided comparing flow rate and head for some of the models.

    Original Title

    Flygt DX Pompalar

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document presents the Flygt DX range of submersible wastewater and drainage pumps. It describes the key features of 11 pump models ranging from 0.55 to 1.5 kW including their discharge sizes, passage sizes for solids, materials, and maximum heads and flows. The pumps have stainless steel bodies and casings, dry motors, twin seal systems, and are suitable for continuous duty transferring dirty, clean, and contaminated water in various applications. Performance curves are provided comparing flow rate and head for some of the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views4 pages

    Flygt DX: Submersible Wastewater & Drainage Pumps, 50Hz

    Uploaded by

    Andrey Gyrych
    The document presents the Flygt DX range of submersible wastewater and drainage pumps. It describes the key features of 11 pump models ranging from 0.55 to 1.5 kW including their discharge sizes, passage sizes for solids, materials, and maximum heads and flows. The pumps have stainless steel bodies and casings, dry motors, twin seal systems, and are suitable for continuous duty transferring dirty, clean, and contaminated water in various applications. Performance curves are provided comparing flow rate and head for some of the models.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Flygt DX

    Submersible wastewater & drainage pumps, 50Hz


    Moving or removing Features
    – Dry motor

    water – clean, used or – Continuous duty with liquid at 35°C when the pump
    is completely submerged

    worse
    – Twin seal system with lower mechanical seal in
    Silicone Carbide and upper lip seal in nitrile rubber
    – Float switch in compliance with European standards
    Presenting the DX range from Flygt. Compact, highper- – Power supply cable in neoprene type HO7RN-F
    formance, submersible pumps with pump body and
    motor casing in stainless steel. Available with a vortex Featuring the DX 35-5 and DXV 35-5
    channel or grinder type impeller. In all, there are eleven – Discharge 11/2” BSP
    sizes offering a wide range of applications: – 35 mm passage of suspended solids
    – from 0.55 to 1.1 kW, 1-phase, and 0.55 to 1.5 kW, – Impeller in fibreglass-reinforced nylon
    3-phase versions Featuring the DX 50-7, 50-11, 50-15, and the DXV
    – emptying of sewage collection tanks, civil drainage 50-7, 50-11, 50-15:
    and used water in general – Discharge 2” BSP (convertible to flanged version with
    – usage in Pressurized Sewage Systems (DXG) optional accessory
    – drainage of underpasses and yards, tanks and – 50 mm passage of suspended solids
    reservoirs, ditches and trenches – Twin channel or vortex impeller in stainless steel
    – transfer of dirty water
    – transfer of clean and contaminated waters Featuring DXG 25-11, and DXGM 25-11
    – emergency drainage in case of flooding – Discharge 1” BSP
    – transfer of groundwater – DXG impeller in fibreglass reinforced PBT plastic and
    cutting parts in hardened stainless steel.

    1 Lifting handle, fibreglass 2 10 Impeller, DXV vortex or DX


    3
    reinforced nylon channel type, in stainless steel
    2 Testing hole for injecting AISI 304 (or fibreglass-reinforced
    compressed air to check the nylon in the DXV 35-5)
    4
    hermetic seal of the motor
    gaskets DXG impeller in fibreglass rein-
    3 Cable holder. The float switch forced PBT plastic and cutting
    cable can be fixed at various parts in hardened stainless steel
    heights to start the pump at
    the fluid level required
    4 Capacitor 5
    5 Dry motor, with class F win
    dings and built-in motor pro- 6
    tection (for single-phase ver
    sions) 7
    6 Pump body and motorcasing
    in stainless steel AISI 304. – all elastomers in nitrile rubber
    DXG cast iron 8 (NBR)
    7 Sealing system: Outer
    mechanical seal in silicon – all screws and washers in stain-
    carbide. Inner lip seal in less steel AISI 304
    10
    nitrile rubber
    8 Shaft in stainless steel AISI 304
    9 Delivery port from 2” (50 mm)
    except DX(V) 35-5 with 1”1/2
    ports (35 mm) and DXG with
    1” (25 mm)
    9

    DX V M 35 -5 SG Null =With level regulator (Single-phase)


    SG =Without level regulator (Single-phase)
    Shaft power in kWx10
    Size
    Null =Three-phase
    M =Single-phase
    Null =Closed channel impeller
    V =Vortex impeller
    G =Grinder
    DX =Series name
    DX 35-5, 50-7, 50-11, 50-15 DX DX DX DX
    16
    H[m] 35-5 50-7 50-11 50-15
    Rated output kW 0.55 0.75 1.1 1.5
    14
    Max head m 10.5 10.0 12.7 14.8
    12
    Max flow l/min 320 500 600 675
    10 1-phase X X X –
    3-phase X X X X
    8

    Rated current
    6
    1-phase A 3.94 5.84 7.02 –
    50-15
    4 3-phase A 1.49 2.36 2.73 3.81
    50-11

    2
    50-7
    Discharge conn: 11/2” 2” 2” 2”
    35-5

    Voltage 1-phase 230V, 3-phase 400V


    0
    0 1 2 3 4 5 6 7 8 9 10 11 12 Q[l/s]
    0 5 10 15 20 25 30 35 40 Q[m3/h]
    Max temp of pumped liquid 35°C
    Cable HO7RN-7 10 m
    Float switch for 1-phase optional

    DXV 35-5, 50-7, 50-11, DXV DXV DXV DXV


    35-5 50-7 50-11 50-15
    50-15
    12
    H[m]

    Rated output kW 0.55 0.75 1.1 1.5

    10
    Max head m 9 7.7 9 11.2
    Max flow l/min 250 400 450 550
    8 1-phase X X X –
    3-phase X X X X
    6
    Rated current
    1-phase A 3.94 5.84 7.02 –
    4
    50-11 50-15
    3-phase A 1.49 2.36 2.73 3.81
    50-7

    2 Discharge conn: 11/2” 2” 2” 2”


    35-5

    Voltage 1-phase 230V, 3-phas 400V


    0
    0 1 2 3 4 5 6 7 8 9 10 Q[l/s] Max temp of pumped liquid 35°C
    0 5 10 15 20 25 30 35 Q[m3/h]

    Cable HO7RN-7 10 m
    Float switch for 1-phase optional

    DXG 25-11 DXG DXGM


    H[m] 25-11 25-11
    30
    Rated output kW 1.1 1.1
    25 Max head m 25 25
    Max flow l/min 2.2 2.2
    20
    1-phase – X
    3-phase X –
    15
    Rated current

    10
    1-phase A 230V – 7.02
    3-phase A 230V 4.73 –
    5 400V 2.73 –
    25-11 Max temp of pumped liquid 35°C
    0
    0 0,3 0,7 1,0 1,3 1,7 2,0 2,3 Q[l/s] Cable HO7RN-7 10 m
    Q[m3/h]
    0 1 2 3 4 5 6 7 8
    Float switch for 1-phase optional
    467 . Flygt DX . 1 . Master . 1 . 20111117
    Pump dimensions and weight

    Pump type Dimensions in mm DNM Weight


    H H1 H2 H3 L L1 L2 kg

    DX(V) 35-5 391 88 ISO G11/2” 8.9


    DX(V) 50-7 438 111.5 ISO G2” 11.6
    DX(V) 50-11 468 111.5 ISO G2” 13.6
    DX(V) 50-15 468 111.5 ISO G2” 14.6
    DX(V)M 35-5 391 88 375 155 420 275 145 ISO G11/2” 10.2
    DX(V)M 50-7 468 111.5 420 155 495 350 145 ISO G2” 13.6
    DX(V)M 50-11 468 111.5 420 155 495 350 145 ISO G2” 15.3
    DXG 25-11(with legs) 446 104 296 135 158 ISO G1” 18.3
    DXG 25-11(w/o legs) 404 60 91 158
    DXGM 25-11(with legs) 446 104 296 135 508 350 158 ISO G1” 19.0
    DXGM 25-11(w/o legs) 404 60 91 158

    Flygt is a brand of Xylem. For the latest


    version of this document and more
    information about Flygt products visit
    www.flygt.com

    You might also like