Qingdao Casting Quality Industrial Co.

, Ltd
Tel: +86-532-82972967 Fax: +86-532-82972913
www.castingquality.com mark@castingquality.com
Casting Material: Stainless Steel CF8

CF8 is a cast austenitic material for pressure containing parts, which covered by ASTM A351 and ASTM
A743 standard.

CF8 Chemical Requirements in those two standard is same as bellow:

om
ASTM A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts:
ASTM 743A Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,
Corrosion Resistant, for General Application: www.castingquality.com

y.c
Carbon: 0.08 max
Manganese: 1.50 max
Silicon: 2.0 max
Sulfur: 0.040 max

lit
Phosphorus: 0.040 max
Chromium: 18.0-21.0
Nickel: 8.0-11.0 a
Molybdenum: max 0.50 in ASTM A351, no requirement in A743
qu
Tensile Strength: min 70ksi(485Mpa)
Yield Strength: min 30ksi (205Mpa)
Elongation in 2in. or 50mm: min 35.0%
ing

CF8 Heat treatment process: Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat
casting to temperature, quench in water or rapid cool by other means. www.castingquality.com
st

CF8 equal to SS304/F304 and Chinese Standard GB/T2100 ZG0Cr18Ni9Ti www.castingquality.com

Manufacture process in Qingdao Casting Quality company: Sand Casting, Precision

ca

Investmetn Casting (Lost Wax Casting).

What means of CF8:www.castingquality.com

w.

As to the designation -www.castingquality.com

C (first letter) means the service it is intended to be used in this case - corrosion resistant service ,
ww

but Casting Quality think sometimes it means of CASTING usage because you will find F304 in ASTM A
350 ( F = FORGing)www.castingquality.com

F(second letter) -The second letter indicates the approximate location of the alloy on the
iron-chromium-nickel (FeCrNi) ternary diagram. For users familiar with the diagram, the second letter
does provide an indication of the nominal iron, nickel, and chromium content, but most people would
have to obtain alloying information from a material specification.www.castingquality.com

Room 0329, No. 51 Taiping Road, Qingdao City, Shandong Province, China ZIP:266002
ww
w.
ca
st
ingq
ua
lit
y.c
om
 Qingdao Casting Quality Industrial Co., Ltd.

Introduction

As professional supplier of castings in China, Qingdao Casting Quality Industrial Co., Ltd
provide our clients perfect solution in metal industry. We focus on providing service and
quality exceeding customer's expectation, at highly competitive prices.

The production process includes sand casting, investment casting, die casting, lost foam
casting, centrifugal casting and permanent casting. Today, its products are marketed globally
through many countries.

Why Choose Casting Quality As Your Partner?

Integrity
We will honestly inform our clients of our capacity and quality level. All clients have the right to
get the actual details including production process, quality, shipment and defects. The
honesty will be benefit to both parts.

Innovation
Our engineers are more than just designers. They are pioneers. Our team use CAD/CAM to
make the simulation of casting parts. Through the advanced technology, we can know the
weight and structure. We also visit many other factories to know the differences and to
improve our products every year.

Quality
We are obsessed with quality. Casting Quality constantly strives to exceed our customers'
expectations in durability and performance. In fact, we will control the whole processes from
the original material to the finished parts, Uniquely-designed Quality Control System focuses
on ensuring four product goals: 1) Eligible Chemistry, 2) Hardness 3) Mechanical Property
and 4) Affordable Pricing.

Service
We are located in Qingdao, China, The transportation is convenient for both road and sea.
Courteous service is part of who we are, and we do it better than anyone in the industry. With
Casting Quality you can expect friendly, knowledgeable and prompt customer service.
Shipping orders complete and on-time is of paramount importance to our customers. We will
count the delivery date and result before accepting your order .Casting Quality consistently

INTEGRITY

QUALITY

INNOVATION
 Sand Castng
Sand casting is divided into many types: GREEN SAND CASTING, RESIN SAND CASTING AND SODIUM SILICATE BONDED SAND CASTING. Green sand casting is
the lowest cost method to get a product,whose surface finish is not good too.Resin sand casting will get a good surface and precision dimensions,so it is
widely used in automobile industry.

Casting Quality Industrial mainly cast Gray Iron, Ductile Iron, Malleable Iron, Wear Resistant Cast Iron, Carbon Steel, Stainless Steel, Brass/Bronze and Aluminum.

Unit weight range from 100g to 20tons.

Investment Casting
As highly versatile casting process,Investment Casting has for some time been perceived as a comparatively expensive process. But when compared to alternative
processes which require extensive welding or machining, an investment cast component can often dramatically reduce overall part production costs.

Casting Quality Industrial would adapt three investment casting methods to reach our clients'quality requirement:Water Glass (
C olloidal Silica-sodium), Silica Sol
technology;or Colloidal Silica-sodium Silicate Compound.Water Glass technology is the worst quality but cheapest.Silica Sol technology is the best quality
but most expensive.We will analysis the usage and drawings tolerance to choose an economic method.

Unit weight range from 1g to 100Kgs.

 Qingdao Casting Quality Industrial Co., Ltd.

Centrifugal Casting Lost Foam Casting

Centrifugal Casting mainly produce the pipes or pipe Lost-foam casting (LFC) is a type of evaporative-pattern
figure products,such as ductile iron pipe,cast iron casting process that is similar to investment casting
soil pipe,glass roller,Furnace Roller and radiant except foam is used for the pattern instead of wax. This
tubes. process takes advantage of the low boiling point of foam
to simplify the investment casting process by removing
the need to melt the wax out of the mold. Casting
Quality Industrial only supply ductile iron or steel parts
by lost foam casting method, such as valve body,
impeller, pipe fittings, electrode and simply figure parts.

Die Casting Permanent Casting

Die casting is a metal casting process that is permanent casting and low pressure casting, Casting
characterized by forcing molten metal under high Quality only used to make aluminum castings,
pressure into a mold cavity. Die Casting is generally use to permanent casting can get a better surface and
make aluminum and zinc alloy parts. dimensions than sand castings, low pressure casting
can get a stably structure which are suitable to the
endure pressure parts.
 Qingdao Casting Quality Industrial Co., Ltd.

Quality Control

Experienced inspection team of Casting Quality conducts the entire quality control procedure
from raw material to finished products. All inspectors are well trained and have rich product
knowledge & inspection experiences.

* Raw Material Control.

* Chemistry Spectrum Analysis
* Mechanical Property
* Metallographic Analysis
* Ultrasonic Testing
* Magnetic Testing.
* Radiographic Testing.
* Dimension Inspection.
* Visual Inspection
* Dimension Checking
* Chemical Analysis
* Penetrant Testing
* Leak Testing
* Hardness Test
 Valve &Fittings

Marine Fittings

Automobile Parts

Accessories

Qingdao Casting Quality Industrial Co., Ltd.

Add: Room 0329, No. 51 Taiping Road, Qingdao City, Shandong Province,
China (P.O.: 266002)
Tel: +86 532 82972996
Fax:+86 532 82972913
Website: www.castingquality.com
Mail: mark@castingquality.com
 Qingdao Casting Quality Industrial Co., Ltd
Tel: +86-532-82972967 Fax: +86-532-82972913
www.castingquality.com mark@castingquality.com
8- the third and fourth digits represent the maximum permitted carbon content in units of 0.01% (e.g.,
CF8 has a maximum of 0.08% carbon)www.castingquality.com

Room 0329, No. 51 Taiping Road, Qingdao City, Shandong Province, China ZIP:266002