Current Date: 09-04-2021 13:18

Units system: English

File name: A:\Jeeva\GMU\08-04-2021\New folder\C003_R00(Calc)_04-08-2021.rcnx

Steel connections
Detailed report
___________________________________________________________________________________________________________________________

___________________________________________________________________________________________________________________________

Connection name : Gusset BP

Connection ID : 1
___________________________________________________________________________________________________________________________

Family: Column - Base (CB)

Type: Gusset
GENERAL INFORMATION C003(Calc)
Connector

MEMBERS
Actual members
Right brace : Yes
Left brace : No
Column
General
Section : W 10X88
Material : A992 Gr50
Column orientation : Transversal
Transversal offset : 0 in
Include opposite stiffener : No
Right brace
General
Section : HSS_SQR 10X10X1_2
Material : A500 GrB rectangular
Brace slope angle (degrees) : 40
Brace long leg on gusset : Yes
Additional geometric data
wpx: WP horizontal displacement : 0 in
wpy: WP vertical displacement : 1 in
Le: Minimum distance to other members : 1 in
L1: Left distance : 3 in
L2: Right distance : 3 in

Page1
BASE PLATE
Base plate
Position on the support : Center
N: Longitudinal dimension : 24 in
B: Transversal dimension : 52 in
Thickness : 3 in
Material : A572 Gr50
Column weld : E70XX
Outer welds flanges only : No
D: Column weld size (1/16 in) : 8 REFER DESIGN DRAWING FOR BASE PLATE
Override A2/A1 ratio : No
DESIGN
Include shear lug : Yes
Shear lug
Orientation : Transversal direction
Consider same width as base plate : Yes
Depth : 6 in
Thickness : 3.5 in
Weld type : Fillet
Base plate weld : E70XX
Base plate weld size : 12
Consider friction : No
Support
With pedestal : No
Longitudinal dimension : 200 in
Transversal dimension : 200 in
Thickness : 70 in
Material : Concrete
Include grouting : No
Anchor
Anchor position : Transversal position
Rows number per side : 1
Anchors per row : 4
Longitudinal edge distance on the plate : 3 in
Transverse edge distance on the plate : 3 in
Anchor type : Headed
Head type : Heavy hexagonal
Include lock nut : No
Anchor : 2"
Effective embedment depth : 30 in
Total length : 35.64 in
Material : F1554 Gr105
Fy : 105 kip/in2
Fu : 125 kip/in2
Cracked concrete : No
Brittle steel : No
Anchors welded to base plate : Yes
Anchor reinforcement
Type of reinforcement : Primary
Tension reinforcement : Yes
Tension bar size : no. 11
Tension bar grade : 40 kip/in2
Tension number of bars : 8
Shear reinforcement : Yes
Shear bar size : no. 11
Shear bar grade : 40 kip/in2
Shear number of bars in major axis direction : 20
Shear number of bars in minor axis direction : 20

INTERFACES
Right brace - Gusset
General
tp: Thickness : 1 in
Material : A36
LV: Length on column : 22 in
LH: Length over plate : 25 in
Right brace - Gusset/Brace connection
General
Connection type : Welded
Lt: Length on toe : 16 in
Lh: Length on heel : 16 in
Brace weld : E70XX

Page2
 D: Weld size (1/16 in) : 5
dp: Distance between weld and plate end : 1 in
Right brace - Gusset/Column connection
General
Connection type to column : Directly welded
Directly welded
Column weld : E70XX
D: Weld size to column (1/16 in) : 5
Right brace - Gusset/Base plate connection
Directly welded
Base plate weld : E70XX
D: Plate weld size (1/16 in) : 5

Design code: AISC 360-10 LRFD, ACI 318-11

Interface between Gusset - Top right brace

Connection: Directly welded
DEMANDS
Pu Description Load type
[kip]
----------------------------------------------------------------------------------------------------
-340.00 DL Design
340.00 DL1 Design
----------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Brace - Directly welded Connection

Total weld design strength [Kip] 445.48 340.00 DL 0.76 Eq. J2-4,
Eq. J2-6
Maximum weld force that brace can develop [Kip] 776.74 340.00 DL 0.44 Eq. J4-4
Gusset
Maximum weld force that gusset can develop [Kip] 835.20 340.00 DL 0.41 Eq. J4-4
Block shear on gusset [Kip] 985.80 340.00 DL1 0.34 Eq. J4-5

Ratio 0.76

Checks for gusset and brace

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Brace
Yielding strength due to axial load [Kip] 712.08 340.00 DL1 0.48 Eq. J4-1
Tension rupture [Kip] 538.00 340.00 DL1 0.63 Eq. J4-2
Gusset
Tension yielding on the Whitmore section [Kip] 619.27 340.00 DL1 0.55 Eq. J4-1
Buckling on the Whitmore section [Kip] 922.54 340.00 DL 0.37 Eq. E3-1

Ratio 0.63

Right gusset interface - base plate

Directly welded
DEMANDS
Beam Column
Description Ru Pu Mu Pu Mu22 Mu33 Load type
[kip] [kip] [kip*ft] [kip] [kip*ft] [kip*ft]
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DL -254.86 -36.99 -3.95 0.00 0.00 0.00 Design
DL1 254.86 36.99 3.95 0.00 0.00 0.00 Design
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Page3
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Gusset
Beam yielding (normal stress) [Kip] 810.00 44.57 DL 0.06 Eq. B-1,
Appendix B,
DG29, Eq. J4-1
Shear yielding [Kip] 540.00 254.86 DL 0.47 Eq. J4-3
Gusset edge tension stress [Kip/in2] 32.40 1.48 DL 0.05 J4-1
Gusset edge shear stress [Kip/in2] 21.60 10.19 DL 0.47 J4-1
Weld capacity [Kip] 362.04 322.22 DL 0.89 Tables 8-4 .. 8-11

Ratio 0.89

Upper right gusset interface - column

Directly welded
DEMANDS
Beam Column
Description Ru Pu Mu Pu Mu22 Mu33 Load type
[kip] [kip] [kip*ft] [kip] [kip*ft] [kip*ft]
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DL -181.56 -5.59 -0.55 0.00 0.00 0.00 Design
DL1 181.56 5.59 0.55 0.00 0.00 0.00 Design
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Gusset
Beam yielding (normal stress) [Kip] 712.80 6.80 DL 0.01 Eq. B-1,
Appendix B,
DG29, Eq. J4-1
Shear yielding [Kip] 475.20 181.56 DL 0.38 Eq. J4-3
Gusset edge tension stress [Kip/in2] 32.40 0.25 DL 0.01 J4-1
Gusset edge shear stress [Kip/in2] 21.60 8.25 DL 0.38 J4-1
Weld capacity [Kip] 307.52 227.07 DL 0.74 Tables 8-4 .. 8-11
Column
Web plate strength due out-of-plane transverse load [Kip] 114.47 5.59 DL 0.05 AISC Manual 15th Ed.
p.9-16

Ratio 0.74

interface between Column - base plate

DEMANDS
Description Pu Mu22 Mu33 Vu2 Vu3 Load type
[kip] [kip*ft] [kip*ft] [kip] [kip]
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DL -218.55 43.41 0.00 0.00 260.46 Design
DL1 218.55 -43.41 0.00 0.00 -260.46 Design
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Design for minor axis

Base plate (AISC 360-10 LRFD)
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References

Base plate
Distance from anchor to edge [in] 2.00 0.25 --
Weld size [1/16in] 8 4 -- table J2.4
Right gusset
Weld size [1/16in] 5 5 -- table J2.4

REFER DESIGN DRAWING FOR BASE PLATE

DESIGN

Page4
DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Concrete base
Axial bearing [Kip/in2] 4.42 0.19 DL 0.04 DG1 3.1.1;
Base plate
Flexural yielding (bearing interface) [Kip*ft/ft] 101.25 30.79 DL 0.30 DG1 Eq. 3.3.13,
DG1 Sec 3.1.2
Flexural yielding (tension interface) [Kip*ft/ft] 101.25 59.57 DL1 0.59 DG1 Eq. 3.3.13
Column
Weld capacity [Kip/ft] 200.46 37.85 DL1 0.19 p. 8-9,
Sec. J2.5,
Sec. J2.4,
DG1 p. 35

Ratio 0.59

Minor axis
Anchors
GEOMETRIC CONSIDERATIONS
Dimensions Unit Value Min. value Max. value Sta. References

Anchors
Anchor spacing [in] 15.33 8.00 -- Sec. D.8.1
Concrete cover [in] 76.00 3.00 -- Sec. 7.7.1
Effective length [in] 31.30 -- 68.70

DESIGN CHECK
Verification Unit Capacity Demand Ctrl EQ Ratio References

Anchor tension [Kip] 234.21 32.41 DL1 0.14 Eq. D-2

Pullout of anchor in tension [Kip] 166.69 32.41 DL1 0.19 Sec. D.3.3.4.4
Anchors reinforcement in tension [Kip] 374.40 218.55 DL1 0.58 Sec. D.5.2.9,
D.6.2.9
Anchor shear [Kip] 121.79 32.56 DL 0.27 Eq. D-29
Pryout of anchor in shear [Kip] 436.48 32.56 DL 0.07 Eq. D-3,
Table D.4.1.1,
Sec. D.4.3
Pryout of group of anchors in shear [Kip] 751.66 260.46 DL1 0.35 Eq. D-4,
Table D.4.1.1,
Sec. D.4.3
Anchors reinforcement in shear [Kip] 936.00 260.46 DL 0.28 Sec. D.5.2.9,
D.6.2.9
Interaction of tensile and shear forces [Kip] 1.20 0.00 DL 0.00 Eq. D-2,
Sec. D.3.3.4.4,
Eq. D-29,
Eq. D-3,
Table D.4.1.1,
Sec. D.4.3,
Eq. D-4,
Sec. D.7

Ratio 0.58

Ratio 0.59

REFER DESIGN DRAWING FOR BASE PLATE

DESIGN

Page5
Minor axis
Maximum compression (DL)

----------------------------------------------------------------------------------------------------------------------------------------
Maximum bearing pressure 192.77 [lb/in2]
Minimum bearing pressure 192.77 [lb/in2]
Maximum anchor tension 0.17 [kip]
Minimum anchor tension 0.00 [kip]
Neutral axis angle 0.00 [deg]
Bearing length 47.31 [in]
----------------------------------------------------------------------------------------------------------------------------------------

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[in] [in] [kip] [kip]
------------------------------------------------------------------------------------------------------------------------------------------------------------
1 -23.00 -9.00 32.56 0.17
2 -7.67 -9.00 32.56 0.00
3 7.67 -9.00 32.56 0.00
4 23.00 -9.00 32.56 0.00
5 23.00 9.00 32.56 0.00
6 7.67 9.00 32.56 0.00
7 -7.67 9.00 32.56 0.00
8 -23.00 9.00 32.56 0.17
------------------------------------------------------------------------------------------------------------------------------------------------------------

Maximum tension (DL1)

----------------------------------------------------------------------------------------------------------------------------------------
Maximum bearing pressure 0.00 [lb/in2]
Minimum bearing pressure 0.00 [lb/in2]
Maximum anchor tension 32.41 [kip] REFER DESIGN DRAWING FOR BASE PLATE
Minimum anchor tension 22.22 [kip] DESIGN
Neutral axis angle 0.00 [deg]
Bearing length -97.30 [in]
Page6
 ----------------------------------------------------------------------------------------------------------------------------------------

Anchors tensions
Anchor Transverse Longitudinal Shear Tension
[in] [in] [kip] [kip]
--------------------------------------------------------------------------------------------------------------------------------------------------------------
1 -23.00 -9.00 -32.56 22.22
2 -7.67 -9.00 -32.56 25.62
3 7.67 -9.00 -32.56 29.02
4 23.00 -9.00 -32.56 32.41
5 23.00 9.00 -32.56 32.41
6 7.67 9.00 -32.56 29.02
7 -7.67 9.00 -32.56 25.62
8 -23.00 9.00 -32.56 22.22
--------------------------------------------------------------------------------------------------------------------------------------------------------------

Global critical strength ratio 0.89

REFERENCES
[9] AISC 2005, Design Examples Version 13.0, pp. IIC-26 - IIC-27

REFER DESIGN DRAWING FOR

BASE PLATE DESIGN

Page7