Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 120 views

    Ingress Academy " " Course Syllabus

    Uploaded by

    yaver
    The course syllabus describes the Cisco CCNA 200-301 certification course over 3 months. It will cover networking fundamentals including IPv4, IPv6, routing, switching, wireless LANs, security, and network automation. Students will learn concepts through 24 lectures and hands-on labs using tools like Packet Tracer and GNS3. Topics are divided into three sections covering networking basics, routing/switching configuration, and advanced services.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ingress Academy " " Course Syllabus

    Uploaded by

    yaver
    120 views3 pages
    The course syllabus describes the Cisco CCNA 200-301 certification course over 3 months. It will cover networking fundamentals including IPv4, IPv6, routing, switching, wireless LANs, security, and network automation. Students will learn concepts through 24 lectures and hands-on labs using tools like Packet Tracer and GNS3. Topics are divided into three sections covering networking basics, routing/switching configuration, and advanced services.

    Original Title

    Ingress_Academy_CCNA_Course_Program

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The course syllabus describes the Cisco CCNA 200-301 certification course over 3 months. It will cover networking fundamentals including IPv4, IPv6, routing, switching, wireless LANs, security, and network automation. Students will learn concepts through 24 lectures and hands-on labs using tools like Packet Tracer and GNS3. Topics are divided into three sections covering networking basics, routing/switching configuration, and advanced services.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    120 views3 pages

    Ingress Academy " " Course Syllabus

    Uploaded by

    yaver
    The course syllabus describes the Cisco CCNA 200-301 certification course over 3 months. It will cover networking fundamentals including IPv4, IPv6, routing, switching, wireless LANs, security, and network automation. Students will learn concepts through 24 lectures and hands-on labs using tools like Packet Tracer and GNS3. Topics are divided into three sections covering networking basics, routing/switching configuration, and advanced services.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Ingress Academy “​CISCO CCNA 200-301​” course syllabus

    COURSE DESCRIPTION:

    CISCO CCNA 200-301

    Successful candidates will be able to:

    ● Understand IPv4 and IPv6


    ● Get knowledge about network cable types and implementing and installing cables
    ● Understand main network concepts (TCP/IP, OSI, LAN-WAN,
    TRANDITIONAL-SDN)
    ● Configure network devices as a switch and router.
    ● Basic switching implementing and configuration (VLANs, Etherchannel, Port
    configurations etc.)
    ● Basic routing implementing and configuration (static and dynamic routing, OSPF,
    NAT and etc.)
    ● Gain basic wireless knowledge
    ● Gain basic network automation knowledge
    ● Gain basic Network Security knowledge
    ● Get knowledge about troubleshooting and monitoring network
    ● Use Network emulator and simulator for simulate network

    COURSE FORMAT:

    Lecture: Total 24 sessions in 3 month. Twice in a week. 1 session at least 2 hours long.

    LEARNING OBJECTIVES AND COURSE CALENDAR:

    Lesson Topics
    I Month

    1 Introduction to Networking
    Introduction to TCP/IP Networking
    Fundamentals of Ethernet LANs
    Fundamentals of WANs and IP Routing

    2 Implementing Ethernet LANs


    Using the Command-Line Interface
    Analyzing Ethernet LAN Switching
    Configuring Basic Switch Management
    Configuring and Verifying Switch Interfaces
    3 LABS: Cable installation, GNS3 and Packet tracer, entering switch CLI
    4 Implementing VLANs and STP
    Implementing Ethernet Virtual LANs
    Spanning Tree Protocol Concepts
    RSTP and EtherChannel Configuration
    5 IPv4 Addressing
    Perspectives on IPv4 Subnetting
    Analyzing Classful IPv4 Networks
    Analyzing Subnet Masks
    Analyzing Existing Subnets
    6 LABS: IP subnetting tests, switch configuration (vlans, STP,
    etherchannel)
    7-8 IPv4 Routing
    Operating Cisco Routers
    Configuring IPv4 Addresses and Static Routes
    IP Routing in the LAN
    Troubleshooting IPv4
    LABS: entering router CLI, routing basics
    II Month

    1 OSPF
    Understanding OSPF Concepts
    Implementing OSPF
    OSPF Network Types and Neighbors

    2-3 IP Version 6
    Fundamentals of IP Version 6
    IPv6 Addressing and Subnetting
    Implementing IPv6 Addressing on Routers
    Implementing IPv6 Routing
    LABS: OSPF LABS, IPV6 LABs
    4 Wireless LANs
    Fundamentals of Wireless Networks
    Analyzing Cisco Wireless Architectures
    Securing Wireless Networks
    Building a Wireless LAN

    5-6 IP Access Control Lists


    Introduction to TCP/IP Transport andApplications
    Basic IPv4 Access Control Lists
    Advanced IPv4 Access Control Lists
    LABS: implementing ACLS
    7-8 Security Services
    Security Architectures
    Securing Network Devices
    Implementing Switch Port Security
    Implementing DHCP
    DHCP Snooping and ARP Inspection
    LABS: Prevent switch level “hacking”

    III Month

    1-2 IP Services
    Device Management Protocols
    Network Address Translation
    Quality of Service (QoS)
    Miscellaneous IP Services
    LABS: NAT, QoS

    3- 4 Network Architecture
    LAN Architecture
    WAN Architecture
    Cloud Architecture

    5-6 Network Automation


    Introduction to Controller-Based
    Networking
    Cisco Software-Defined Access (SDA)
    Understanding REST and JSON
    Understanding Ansible, Puppet, and Chef

    7-8 LABS: automation network, final review

    Ingress Academy: 2020

    You might also like