Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

VMW VCP NV Exam Preparation Guide

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

EXAM PREPARATION GUIDE

Professional VMware NSX-T Data Center 3.0

Exam Details (Last Updated: 12/13/2019)


The Professional VMware NSX-T Data Center 3.0 exam (2V0-41.20) which leads to VMware Certified Professional –
Network Virtualization 2021 certification is a 70-item exam, with a passing score of 300 using a scaled method.
Candidates are given an appointment time of 130 minutes, which includes an adequate time to complete the exam for
non-native English speakers.
Exam Delivery
This is a proctored exam delivered through Pearson VUE. For more information, visit the Pearson VUE website.
Certification Information
For details and a complete list of requirements and recommendations for attainment, please reference the VMware
Education Services – Certification website.
Minimally Qualified Candidate
The minimally qualified candidate should have 6 months or more experience installing, configuring, managing, and
troubleshooting NSX-T Data Center 3.0 solutions. Candidates should be knowledgeable of the features, functions, and
architectures of NSX-T. They should have at least 6 months hands-on experience with Linux and KVM. They should have 1
year of experience working in IT and with VMware vSphere and its command line. The successful candidate will likely hold
additional industry-recognized IT certifications or accreditation. The MQC should have all the knowledge contained in the
exam sections listed below.
Exam Sections
VMware exam blueprint sections are now standardized to the seven sections below, some of which may NOT be included
in the final exam blueprint depending on the exam objectives.
Section 1 – Architecture and Technologies
Section 2 – Products and Solutions
Section 3 – Planning and Designing
Section 4 – Installing, Configuring, and Setup
Section 5 – Performance-tuning, Optimization, and Upgrades
Section 6 – Troubleshooting and Repairing
Section 7 – Administrative and Operational Tasks

DATASHEET | 1
Professional VMware NSX-T Data Center 3.0

If a section is missing from the list below, please note it is because the exam has no testable objectives for that section.
The objective numbering may be referenced in your score report at the end of your testing event for further preparation
should a retake of the exam be necessary.

Sections Included in this Exam


Section 1 – VMware vSphere Architectures and Technologies - There are no testable objectives for this section
Section 2 – VMware Products and Solutions
Objective 2.1 Describe the VMware Virtual Cloud Network Vision
Objective 2.2 Outline the solutions of NSX Portfolio
Objective 2.3 List the use-cases for NSX Data Center
Objective 2.4 Explain the value proposition and features of NSX
Objective 2.5 Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
Objective 2.6 Describe NSX Architecture and Component sub-systems
Objective 2.7 Differentiate the functionalities of Management Plane, Control Plane, Data Plane, and Consumption
Planes
Objective 2.8 Define NSX-T Data Center Terminology
Objective 2.9 Describe the Logical Switching Architecture and Features
Objective 2.10 Describe the Logical Routing Architecture and Features
Objective 2.11 Describe the NSX-T Data Center Network Services
Objective 2.12 Explain the Edge Architecture and Features
Objective 2.13 Explain the NSX Security Architecture and Features
Objective 2.14 Identify the supported integration platforms of NSX-T (Containers, Public Cloud, Private Cloud,
Hybrid Cloud, DevOps tools, 3rd Party etc.)
Section 3 – There are no testable objectives for this section.
Section 4 – Installing, Configuring, and Setting Up a VMware vSphere Solution
Objective 4.1 Outline the installation and preparation workflow of NSX-T Data Center
Objective 4.2 Deploy and Configure NSX-T Data Center Environment
Objective 4.3 Configure Hypervisor Networking [vSphere and KVM] for NSX-T Data Center
Objective 4.4 Configure and manage Logical Switching Features
Objective 4.5 Configure and manage Logical Routing Features
Objective 4.6 Configure NSX-T Edge Nodes and Edge Cluster
Objective 4.7 Configure NSX-T Data Center Network Services [Layer-3]
Objective 4.8 Configure NSX Security Features
Objective 4.9 Configure Service Insertion with NSX-T Data Center
Section 5 – Performance-tuning and Optimizing Upgrades – There are no testable objectives for this section.

DATASHEET | 2
Professional VMware NSX-T Data Center 3.0

Section 6 – Troubleshooting and Repairing


Objective 6.1 Identify the default log file locations of NSX-T Data Center components
Objective 6.2 Compare and Contrast Tools Available for Troubleshooting
Objective 6.3 Troubleshoot Common NSX Installation/Configuration Issues
Objective 6.4 Troubleshoot Common NSX Component Issues
Objective 6.5 Troubleshoot Common Connectivity Issues
Objective 6.6 Troubleshoot Common physical infrastructure Issues
Section 7 – Administrative and Operational Tasks in a VMware vSphere Solution
Objective 7.1 List Operations Tasks in a VMware NSX Environment (syslog, backup/restore etc.)
Objective 7.2 Configure roles and permissions for NSX-T Data Center environment
Objective 7.3 Generate Log bundles
Objective 7.4 Monitor a VMware NSX Implementation

Recommended Courses
VMware NSX-T Data Center: Install, Configure, Manage [V3.0]

References*
In addition to the recommended courses, item writers use the following references for information when writing exam
questions. It is recommended that you study the reference content as you prepare to take the exam, in addition to any
recommended training.
http://www.vmware.com - [Section and Objective Topics]
http://kb.vmware.com - [Section and Objective Topics]
https://blogs.vmware.com - [Section and Objective Topics]
https://docs.vmware.com - [Section and Objective Topics]
https://pubs.vmware.com – [Section and Objective Topics]
https://www.vmware.com/techpapers.html – [Section and Objective Topics]

Sample Questions

Sample questions presented here are examples of the types of questions


candidates may encounter and should not be used as a resource for exam
preparation.

Sample Question 1

DATASHEET | 3
Professional VMware NSX-T Data Center 3.0

Which two VMware Cloud Management systems are compatible with


NSX-T Data Center capabilities? (Choose two.)

A. VMware Power CLI


B. vRealize Automation
C. vRealize CodeStream
D. VMware Integrated OpenStack
E. VMware vSphere
Sample Question 2
Which three networking features could be configured using the NSX Manager
Simplified UI? (Choose three.)

A. NAT Rules
B. containers
C. load balancers
D. logical routers
E. segments
F. logical switches

Sample Question 3
Which discovery protocol is supported for hypervisor transport nodes?

A. Link Layer Discovery Protocol


B. Cisco Discovery Protocol
C. Neighbor Discovery Protocol
D. Adobe Real-time CDP

Sample Question 4
Which two tools could be used to view NSX Policy logs? (Choose two.)

A. NSX Manager CLI


B. NSX Manager root privileged mode
C. ESXI host nsxcli
D. KVM host nsxcli
E. Edge CLI

DATASHEET | 4
Professional VMware NSX-T Data Center 3.0

Sample Question 5
Which CLI command does a NSX administrator use to obtain information about the
NSX Manager configuration when troubleshooting a production system?

A. show configuration
B. get managers
C. show interface
D. get configuration

Sample Question 6 Refer to the exhibit.

DATASHEET | 5
Professional VMware NSX-T Data Center 3.0

A security administrator has configured a gateway firewall rule to block traffic to

all Web servers. What can the administrator infer about the rule publication after

reviewing the log extract?

A. The user has no permission to create gateway firewall rules.


B. The rule has been successfully realized in the NSX Manager.
C. The rule has been successfully realized in the data path.
D. There was a communication problem with the Central Control Plane.

Sample Question 7
Which command is used to set the NSX Manager's logging-level to debug mode for
troubleshooting?

A. set service manager logging-level debug


B. set service nsx-manager logging-level debug
C. set service manager log-level debug
D. set service nsx-manager log-level debug

Sample Question 8
Which three protocols could an NSX administrator use to transfer log messages
to a remote log server? (Choose three.)

A. TCP
B. SSL
C. UDP
D. HTTPS
E. TLS
F. SSH

Sample Question 9
A centralized packet analysis tool VM configured to monitor a NSX-T deployment is
dropping some of the packets sent to it.

Which three actions could minimize the drops? (Choose three.)

A. Increase the RX buffer ring size.


B. Assign more CPU resources to the VM.

VMware, Inc. 3401 Hillview Avenue Palo Alto CA 94304 USA Tel 877-486-9273 Fax 650-427-5001 www.vmware.com
© 2019 VMware, Inc. All rights reserved. The product or workshop materials is protected by U.S. and international copyright and intellectual property laws. VMware products are covered by one or more patents listed
at http://www.vmware.com/download/patents.html. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.

VMware warrants that it will perform these workshop services in a reasonable manner using generally accepted industry standards and practices. THE EXPRESS WARRANTY SET FORTH IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS, IMPLIED, STATUTORY OR OTHERWISE INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SERVICES AND DELIVERABLES
PROVIDED BY VMWARE, OR AS TO THE RESULTS WHICH MAY BE OBTAINED THEREFROM. VMWARE WILL NOT BE LIABLE FOR ANY THIRD-PARTY SERVICES OR PRODUCTS IDENTIFIED OR REFERRED TO
CUSTOMER. All materials provided in this workshop are copyrighted by VMware ("Workshop Materials"). VMware grants the customer of this workshop a license to use and make reasonable copies of any Workshop Materials strictly for
the purpose of facilitating such company's internal understanding, utilization and operation of its licensed VMware product(s). Except as set forth expressly in the sentence above, there is no transfer of any intellectual property rights or
any other license granted under the terms of this workshop. If you are located in the United States, the VMware contracting entity for the service will be VMware, Inc., and if outside of the United States, the VMware contracting entity will
be VMware International Limited.
VMWARE SKU: EDU-WS1DITSFT19-OE REV. 8/2019
Professional VMware NSX-T Data Center 3.0

C. Use DPDK to improve packet processing performance.


D. Ensure the host 10GbE NIC is configured for full duplex.
E. Increase the TX buffer ring size.
F. Increase MTU on the VM to 9000.

Answer Key: 1-B,D; 2-A,C,E; 3-A; 4-A,B; 5-B; 6-A,B; 7-C, 8-A,C,E; 9-A,B,C

Exam Content Contributors

Abdullah Abdullah
Adam Bluhm
Arantxa Duque Barrachina
Chand Basha Shaik
Christian Parker
Iwan Hoogerdoorm
Jens Henning
Karel Novak
Marco van Baggum
Matt Williams
Mike Brown
Nicola Marco Decandia
Patrick Kremer
Raymundo Escobar
Rick Watson
Tim Burkard
Yves Sandfort

VMware, Inc. 3401 Hillview Avenue Palo Alto CA 94304 USA Tel 877-486-9273 Fax 650-427-5001 www.vmware.com
© 2019 VMware, Inc. All rights reserved. The product or workshop materials is protected by U.S. and international copyright and intellectual property laws. VMware products are covered by one or more patents listed
at http://www.vmware.com/download/patents.html. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.

VMware warrants that it will perform these workshop services in a reasonable manner using generally accepted industry standards and practices. THE EXPRESS WARRANTY SET FORTH IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS, IMPLIED, STATUTORY OR OTHERWISE INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SERVICES AND DELIVERABLES
PROVIDED BY VMWARE, OR AS TO THE RESULTS WHICH MAY BE OBTAINED THEREFROM. VMWARE WILL NOT BE LIABLE FOR ANY THIRD-PARTY SERVICES OR PRODUCTS IDENTIFIED OR REFERRED TO
CUSTOMER. All materials provided in this workshop are copyrighted by VMware ("Workshop Materials"). VMware grants the customer of this workshop a license to use and make reasonable copies of any Workshop Materials strictly for
the purpose of facilitating such company's internal understanding, utilization and operation of its licensed VMware product(s). Except as set forth expressly in the sentence above, there is no transfer of any intellectual property rights or
any other license granted under the terms of this workshop. If you are located in the United States, the VMware contracting entity for the service will be VMware, Inc., and if outside of the United States, the VMware contracting entity will
be VMware International Limited.
VMWARE SKU: EDU-WS1DITSFT19-OE REV. 8/2019

You might also like