35 Linux Basic Commands Every User

Should Know
When hearing about Linux, most people think of a complicated operating system that is
only used by programmers. But it’s not as scary as it seems.

Linux is an entire family of open-source Unix operating systems, that are based on the
Linux Kernel. This includes all of the most popular Linux based systems like Ubuntu,
Fedora, Mint, Debian, and others. More accurately, they’re called distributions or
distros.

Since Linux was first released in 1991, it has continued to gain popularity due to its
open-source nature. People can freely modify and redistribute it under their own name.

When operating a Linux OS, you need to use a shell — an interface that gives you
access to the operating system’s services. Most Linux distributions use a graphic user
interface (GUI) as their shell, mainly to provide ease of use for their users.

That being said, it’s recommended to use a command-line interface (CLI) because it’s
more powerful and effective. Tasks that require a multi-step process through GUI can
be done in a matter of seconds by typing commands into the CLI.

So if you’re considering using Linux, learning basic command lines will go a long way. In
this article, you’ll learn 35 basic Linux commands that will undoubtedly help you
navigate through Linux as a newbie.

Linux Basic Commands

Before we go on to the list of commands, you need to open the command line first. If
you are still unsure about the command-line interface, check out this CLI tutorial.

Although the steps may differ depending on the distribution that you’re using, you can
usually find the command line in the Utilities section.

Here is a list of basic Linux commands:

1. pwd command

Use the pwd command to find out the path of the current working directory (folder)
you’re in. The command will return an absolute (full) path, which is basically a path of all
the directories that starts with a forward slash (/). An example of an absolute path
is /home/username.

2. cd command
To navigate through the Linux files and directories, use the cd command. It requires
either the full path or the name of the directory, depending on the current working
directory that you’re in.

Let’s say you’re in /home/username/Documents and you want to go to Photos, a

subdirectory of Documents. To do so, simply type the following command: cd Photos.

Another scenario is if you want to switch to a completely new directory, for

example,/home/username/Movies. In this case, you have to type cd followed by the
directory’s absolute path: cd /home/username/Movies.

There are some shortcuts to help you navigate quickly:

 cd .. (with two dots) to move one directory up

 cd to go straight to the home folder
 cd- (with a hyphen) to move to your previous directory

On a side note, Linux’s shell is case sensitive. So, you have to type the name’s
directory exactly as it is.

3. ls command

The ls command is used to view the contents of a directory. By default, this command

will display the contents of your current working directory.

If you want to see the content of other directories, type ls and then the directory’s path.
For example, enter ls /home/username/Documents to view the content
of Documents.

There are variations you can use with the ls command:

 ls -R will list all the files in the sub-directories as well

 ls -a will show the hidden files
 ls -al will list the files and directories with detailed information like the
permissions, size, owner, etc.

4. cat command

cat (short for concatenate) is one of the most frequently used commands in Linux. It is
used to list the contents of a file on the standard output (sdout). To run this command,
type cat followed by the file’s name and its extension. For instance: cat file.txt.

Here are other ways to use the cat command:

 cat > filename creates a new file

  cat filename1 filename2>filename3 joins two files (1 and 2) and stores the
output of them in a new file (3)
 to convert a file to upper or lower case use, cat filename | tr a-z A-Z >output.txt

5. cp command

Use the cp command to copy files from the current directory to a different directory. For
instance, the command cp scenery.jpg /home/username/Pictures would create a
copy of scenery.jpg (from your current directory) into the Pictures directory.

6. mv command

The primary use of the mv command is to move files, although it can also be used to
rename files.

The arguments in mv are similar to the cp command. You need to type mv, the file’s
name, and the destination’s directory. For example: mv file.txt
/home/username/Documents.

To rename files, the Linux command is mv oldname.ext newname.ext

7. mkdir command

Use mkdir command to make a new directory — if you type mkdir Music it will create a

directory called Music.

There are extra mkdir commands as well:

 To generate a new directory inside another directory, use this Linux basic
command mkdir Music/Newfile
 use the p (parents) option to create a directory in between two existing
directories. For example, mkdir -p Music/2020/Newfile will create the new
“2020” file.

8. rmdir command

If you need to delete a directory, use the rmdir command. However, rmdir only allows
you to delete empty directories.

9. rm command

The rm command is used to delete directories and the contents within them. If you only
want to delete the directory — as an alternative to rmdir — use rm -r.
Note: Be very careful with this command and double-check which directory you are in.
This will delete everything and there is no undo.

10. touch command

The touch command allows you to create a blank new file through the Linux command
line. As an example, enter touch /home/username/Documents/Web.html to create an
HTML file entitled Web under the Documents directory.

11. locate command

You can use this command to locate a file, just like the search command in Windows.
What’s more, using the -i argument along with this command will make it case-
insensitive, so you can search for a file even if you don’t remember its exact name.

To search for a file that contains two or more words, use an asterisk (*). For
example, locate -i school*note command will search for any file that contains the word
“school” and “note”, whether it is uppercase or lowercase.

12. find command

Similar to the locate command, using find also searches for files and directories. The

difference is, you use the find command to locate files within a given directory.

As an example, find /home/ -name notes.txt command will search for a file

called notes.txt within the home directory and its subdirectories.

Other variations when using the find are:

 To find files in the current directory use, find . -name notes.txt

 To look for directories use, / -type d -name notes. txt

13. grep command

Another basic Linux command that is undoubtedly helpful for everyday use is grep. It
lets you search through all the text in a given file.

To illustrate, grep blue notepad.txt will search for the word blue in the notepad file.
Lines that contain the searched word will be displayed fully.

14. sudo command

Short for “SuperUser Do”, this command enables you to perform tasks that require
administrative or root permissions. However, it is not advisable to use this command for
daily use because it might be easy for an error to occur if you did something wrong.
15. df command

Use df command to get a report on the system’s disk space usage, shown in

percentage and KBs. If you want to see the report in megabytes, type df -m.

16. du command

If you want to check how much space a file or a directory takes, the du (Disk Usage)
command is the answer. However, the disk usage summary will show disk block
numbers instead of the usual size format. If you want to see it in bytes, kilobytes, and
megabytes, add the -h argument to the command line.

17. head command

The head command is used to view the first lines of any text file. By default, it will show
the first ten lines, but you can change this number to your liking. For example, if you
only want to show the first five lines, type head -n 5 filename.ext.

18. tail command

This one has a similar function to the head command, but instead of showing the first
lines, the tail command will display the last ten lines of a text file. For example, tail -n
filename.ext.

19. diff command

Short for difference, the diff command compares the contents of two files line by line.
After analyzing the files, it will output the lines that do not match. Programmers often
use this command when they need to make program alterations instead of rewriting the
entire source code.

The simplest form of this command is diff file1.ext file2.ext

20. tar command

The tar command is the most used command to archive multiple files into a tarball — a
common Linux file format that is similar to zip format, with compression being optional.

This command is quite complex with a long list of functions such as adding new files
into an existing archive, listing the content of an archive, extracting the content from an
archive, and many more. Check out some practical examples to know more about
other functions.

21. chmod command

chmod is another Linux command, used to change the read, write, and execute
permissions of files and directories. As this command is rather complicated, you can
read the full tutorial in order to execute it properly.

22. chown command

In Linux, all files are owned by a specific user. The chown command enables you to
change or transfer the ownership of a file to the specified username. For
instance, chown linuxuser2 file.ext will make linuxuser2 as the owner of the file.ext.

23. jobs command

jobs command will display all current jobs along with their statuses. A job is basically a
process that is started by the shell.

24. kill command

If you have an unresponsive program, you can terminate it manually by using

the kill command. It will send a certain signal to the misbehaving app and instructs the
app to terminate itself.

There is a total of sixty-four signals that you can use, but people usually only use two
signals:

 SIGTERM (15) — requests a program to stop running and gives it some time to
save all of its progress. If you don’t specify the signal when entering the kill
command, this signal will be used.
 SIGKILL (9) — forces programs to stop immediately. Unsaved progress will be
lost.

Besides knowing the signals, you also need to know the process identification number
(PID) of the program you want to kill. If you don’t know the PID, simply run the
command ps ux.

After knowing what signal you want to use and the PID of the program, enter the
following syntax:

kill [signal option] PID.

25. ping command

Use the ping command to check your connectivity status to a server. For example, by

simply entering ping google.com, the command will check whether you’re able to
connect to Google and also measure the response time.
26. wget command

The Linux command line is super useful — you can even download files from the
internet with the help of the wget command. To do so, simply type wget followed by the
download link.

27. uname command

The uname command, short for Unix Name, will print detailed information about your
Linux system like the machine name, operating system, kernel, and so on.

28. top command

As a terminal equivalent to Task Manager in Windows, the top command will display a

list of running processes and how much CPU each process uses. It’s very useful to
monitor system resource usage, especially knowing which process needs to be
terminated because it consumes too many resources.

29. history command

When you’ve been using Linux for a certain period of time, you’ll quickly notice that you
can run hundreds of commands every day. As such, running history command is
particularly useful if you want to review the commands you’ve entered before.

30. man command

Confused about the function of certain Linux commands? Don’t worry, you can easily
learn how to use them right from Linux’s shell by using the man command. For
instance, entering man tail will show the manual instruction of the tail command.

31. echo command

This command is used to move some data into a file. For example, if you want to add
the text, “Hello, my name is John” into a file called name.txt, you would type echo
Hello, my name is John >> name.txt

32. zip, unzip command

Use the zip command to compress your files into a zip archive, and use
the unzip command to extract the zipped files from a zip archive.

33. hostname command

If you want to know the name of your host/network simply type hostname. Adding a -
I to the end will display the IP address of your network.
34. useradd, userdel command

Since Linux is a multi-user system, this means more than one person can interact with
the same system at the same time. useradd is used to create a new user,
while passwd is adding a password to that user’s account. To add a new person named
John type, useradd John and then to add his password type, passwd 123456789.

To remove a user is very similar to adding a new user. To delete the users account
type, userdel UserName

Bonus Tips and Tricks

Use the clear command to clean out the terminal if it is getting cluttered with too many
past commands.

Try the TAB button to autofill what you are typing. For example, if you need to type
Documents, begin to type a command (let’s go with cd Docu, then hit the TAB key) and
the terminal will fill in the rest, showing you cd Documents.

Ctrl+C and Ctrl+Z are used to stop any command that is currently working. Ctrl+C will
stop and terminate the command, while Ctrl+Z will simply pause the command.

If you accidental freeze your terminal by using Ctrl+S, simply undo this with the
unfreeze Ctrl+Q.

Ctrl+A moves you to the beginning of the line while Ctrl+E moves you to the end.

You can run multiple commands in one single command by using the “;” to separate
them. For example Command1; Command2; Command3. Or use && if you only want
the next command to run when the first one is successful.

To Sum Up
Basic Linux commands help users execute tasks easily and effectively. It might take a
while to remember some of the basic commands, but nothing is impossible with lots of
practice.

In the end, knowing and mastering these basic Linux commands will be undoubtedly
beneficial for you. Good luck!