Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Lighting Lighting: Tango G3 - BVP38x

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Lighting

Tango G3 - BVP38x
BVP382 LED260/WW 200W 220-240V SWB GM

The energy-saving Philips Tango G3 LED Floodlight is the ideal solution for a wide
range of Area lighting applications. It incorporates the LED light source, optical
system, heat sink and driver into one compact and robust housing that meets
globally recognised safety standards. Its specially designed heat sink incorporates
aesthetics and functionality to ensure excellent reliability. Powered by LED
technology, this luminaire delivers superior performance and a longer lifetime,
bringing area lighting to a whole new level.

Product data

General Information Constant light output No

Lamp family code - Number of products on MCB (16 A type B) -

Lamp colour code Warm white EU RoHS compliant No

Light source replaceable Yes LED engine type LED

Number of gear units - Serviceability class -

Driver/power unit/transformer PSU [ Power supply unit]

Driver included Yes Light Technical


Optical cover/lens type PC-MLO [ Polycarbonate micro lens optic] Standard tilt angle post-top -

Luminaire light beam spread 85° x 85° Standard tilt angle side entry -

Control interface -

Connection Flying leads/wires Operating and Electrical


Cable Cable 1.5 m without plug (C1K5) Input Voltage 220-240 V

Protection class IEC Safety class I (I) Input frequency 50 or 60 Hz

Flammability mark NO [ -] Initial CLO power consumption -W

CE mark CE mark Average CLO power consumption -W

ENEC mark - End CLO power consumption -W

Warranty period 3 years Power factor (min.) 0.95

Optic type outdoor Symmetrical wide beam

Datasheet, 2021, March 18 data subject to change


Tango G3 - BVP38x

Controls and Dimming Luminous flux tolerance +/-10%

Dimmable No Initial LED luminaire efficacy 130 lm/W

Lamp colour temperature 3000 K

Mechanical and Housing Colour Rendering Index 70

Housing material Aluminum die-cast Initial chromaticity SDCM<=7

Reflector material - Initial input power 200 W

Optic material Polycarbonate Power consumption tolerance +/-10%

Optical cover/lens material Polycarbonate

Fixation material Steel Application Conditions


Mounting device MBA [ Mounting bracket adjustable] Ambient temperature range -40 to +50 °C

Optical cover/lens shape - Maximum dimming level Not applicable

Optical cover/lens finish Frosted

Overall length 500 mm Product Data


Overall width 97 mm Full product code 911401612105

Overall height 498 mm Order product name BVP382 LED260/WW 200W 220-240V SWB

Effective projected area 0.17 m² GM

Colour Aluminium and Grey Order code 911401612105

SAP numerator – quantity per pack 1

Approval and Application Numerator – packs per outer box 1

Ingress protection code IP66 [ Dust penetration-protected, jet-proof] SAP material 911401612105

Mech. impact protection code IK08 [ 5 J vandal-protected] Net Weight (Piece) 7.999 kg

Surge protection (common/differential) Luminaire surge protection level up to 15 kV

differential mode and 15 kV common mode

Initial Performance (IEC Compliant)


Initial luminous flux 26000 lm

Dimensional drawing

BVP38x Tango G3

Datasheet, 2021, March 18 2 data subject to change


Tango G3 - BVP38x

© 2021 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or

completeness of the information included herein and shall not be liable for any action in reliance thereon. The

information presented in this document is not intended as any commercial offer and does not form part of any

quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered www.lighting.philips.com

trademarks of Koninklijke Philips N.V. 2021, March 18 - data subject to change

You might also like