A CXR ETHERNET SWITCH FOR YOUR APPLICATION

Industrial and hardened switches

DIN-Rail, 19’’rack or IP-67 enclosure
IEC61850-3 for Electrical Substation Automating System
EN50121-4 for Railway Station
EN50155 & EN50121-3-2 for Rolling Stock & Railway Networks
IEC61000 & Nema TS1/TS2 for Intelligent Traffic System
Hybrid Ethernet with G.Shdsl, fiber & RS232/RS485
Layer 3 switches FE/GE/10GE for Backbone Infrastructures
POE Ethernet IEEE802.3af/3at
SyncE & PTP IEEE 1588V2

Smart solutions for smart networks

 How to select the CXR switch order numbers

SSSS-qq-naa-nbb-ncc-pw-ffff
SSSS Generic name of the switch

SW- 19'' 1U format Unmanageable

SWM- 19'' 1U format Layer 2
SW3- 19'' 1U format Layer 3
SWD- DIN-Rail enclosure Unmanageable
SWMD- DIN-Rail enclosure Layer 2
SWP- Industrial enclosure with panel fixing Unmanageable
SWMP- Industrial enclosure with panel fixing Layer 2
HSW- Plastic box with fiber tray and wall fixing Unmanageable for FTTh
HSWM- Plastic box with fiber tray and wall fixing Layer 2 for FTTh

qq Quality and compliance EMC Railway Electrical substation

[ ] Entreprise switch 0 to 50°C CE - -

I Industrial switch -10 to +60°C IEC61000-6-2 - -
H Hardened switch - 40 to +75°C IEC61000-6-2 - -
HT Hardened switch for railway station - 40 to +75°C IEC61000-6-2 EN50121-4 -
HE Hardened switch for electrical substation - 40 to +75°C IEC61000-6-2 EN50121-4 IEC61850-3, IEEE1613
EN50155 ,
HR Hardened switch used on railway rolling stock - 40 to +75°C IEC61000-6-2
EN50121-3-2
Hx67 Hardened switch in IP-67 enclosure - 40 to +75°C

naa-nbb-ncc number of port, type:

TX 10/100BaseT
GX 1000BaseT
TGX 10/100/1000BaseT
FM 100FX multimode
FS20 100FX singlemode 20 km
FSF Slot for SFP 100FX (always delivered w/o SFP module)
GS 1000SX multimode
GL20 1000LX singlemode 1310nm
GZ20 1000ZX singlemode 1550nm
GSF Slot for SFP 1000SX/LX/ZX (always delivered w/o SFP module)
USF Slot for universal SFP 100FX or 1000SX/LX/ZX (always delivered w/o SFP module)
CB Combo w 10/100/1000BaseT and SFP 1000SX/LX/ZX slot (only one port is active at the same time)
UCBO Universal Combo w 10/100/1000BaseT and dual rate SFP 100FX / 1000SX/LX/ZX slot (only one port is active at the same time)
TM 10/100BaseT with M12 connector
GM 10/100/1000BaseT with M12 connector
XFP Slot for XFP 10GE module LS/LR/ER/ZR (always delivered w/o XFP module)
SFPP Slot for SFP+ 10GE module LS/LR/ER/ZR (always delivered w/o SFP+ module)

TPS 100BaseT POE PSE (source) IEEE802,3af or 3at

TPD 100BaseT POE PD (Powered devices)
GPS 1000BaseT PSE POE (source) IEEE802,3af or 3at

pw power supply

[ ] Entreprise switch is delivered with AC

[ ] DIN-Rail switches are mainly delivered w 3 power supply inputs: 12-48Vdc dual terminal block and 12Vdc self-blocking jack.
1A One AC (110V/220V)
1D8 One DC 48V
2A Two redundant AC (110V/220V)
2D8 Two redundant DC 48V

ffff additional number order

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-2-
 Industrial and Hardened
Ethernet Switches FE/GE/10GE
CXR offers a large range of Fast-Ethernet/Gigabit-Ethernet industrial and hardened switches for
Intelligent Transportation System (ITS) compliant to Nema TS1/TS2, but also for Railway
environment according to EN50121-4 and for Electrical Power Substation Automation System
according to IEC61850-3. These equipments are used in Building Automation and Factory
Automation. CXR proposes also a range of Carrier Ethernet Switches FE/GE/10GE to build
backbones.
Industrial -10 to +60°C Hardened -40 to +75°C
DIN-Rail Switches with dual 12-48Vcc
EN50121-4 Railway and 12Vcc jack power supply. Inputs
IEC 61000-6-2 ITS Intelligent Transportation System - support 6kV electric shocks and 5g at
IEC61850-3
Electrical Power 10-150KHz of 0,35mm vibrations.
Building Automation – Factory Automation —
substation automation SWD-I-5TX / SWD-I-4TX-F...
4 to 5x10/100BaseT, 0 or 1x100FX.
Unmanaged Switches, DIN-Rail SWD-I-8TX-xF… SWD-H-8TX-xF…
6 to 8x10/100BaseT, 0, 1 or 2x100FX.
SWD-H-8TX-xF...
6 to 8 x10/100BaseT, 0,1 or 2x100FX.
SWD-H-16TX-xF...
14 to 16x10/100BaseT, 0,1 or 2x100FX.
SWD-I-5TX
SWD-H-8TX-xF SWD-HE-8TX-xF SWD-HE-8TX-xF...
SWD-I-8TX-xF EN50121-4 and IEC61850-3
SWD-H-16TX-xF Railway and Power substation Automation

Layer 2 Managed Switches, DIN-Rail & 19’’ Support 802.1x Authentification , VLAN
802.1q, QoS 802.1p, RSTP, MSTP, Alpha
-Ring <15ms, Truncking, IGMP...
SWMD-I-8TX and -2FSF-2GSF
8x10/100BaseT, 2 up-link 1000BaseT
SFP 100FX and/or SFP 1000FX
SWMD-I-16TX and -2GS..
SWMD-I-8TX
SWMD-H-16TX and -2FSF,–2GSF
SWMD-I-16TX SWMD-HT-8TX 16x10/100BaseT, 2 up-link 1000BaseT
SWMD-H-16TX SFP 100FX and/or SFP 1000FX
SWMD-HE-16TX
SWMD-HT-8TX and 2FSF–2GSF
EN50121-4 Railway Station
8x10/100BaseT, 2 up-link 1000BaseT
SFP 100FX and/or SFP 1000FX
SWM-HE-24TX SWMD-I-8TGX,-2G…
SWM-HE-24FX 8x10/100/1000BaseT, 2 fixed 1000FX
SWM-H-24TX,–4GX or 4 Combo
SWM-H-24TX-4CB 24x10/100BaseT, 4 up-link 1000BaseT
SWM-H-24FX-4CB or Combo 100/1000BaseT SFP 1000FX
SWM-HE-24TX,–4GX or 4 Combo
SWM-HE-M modular
SWMD-I-8TGX EN50121-4 and IEC61850-3, Railway and
Power Substation automation
SWM-HE-M
SWMP-HR67 Modular switch 24 FE/FX and 4 GE/GX
SWMP-HR67
IP-67 switch EN50155 Rolling Stock

Hybrid Ethernet FE, FX & G.SHDSL.Bis,

Layer 2 Managed Hybrid Ethernet/DSL/FO & RS232/485 switch with encapsulation over TCP/
UDP of RS232/RS485, dry contact ...

CopperWAY-BIS CopperWAY-BIS-2/4W-4RS...
4x10/100Baset, 2 SFP 100FX, 2
GSHDSL.bis 2/4 wires, 4 RS232, contact
Support 802.1x, VLAN 802.1q, Q-in-Q,
Layer 2 & 3 Managed Carrier Ethernet GE/10GE QoS 802.1p, RSTP, MSTP, ESR-Ring
<50ms, G8032, Truncking, IGMP…
SWM-8TX-UCB VLAN routing, RIP1&2, OSPF, VRRP...
SWM-8/24TX-2UCB-AC or DC
SWM-24TX-2UCB 8 or 24x10/100Baset, 2 universal Combo
SW3l-24/48TX/FS-4GE...
SW3L-24/48TX/FX Layer 2+, 24 or 48 ports FE/FX, 4 Combo
SW3G-20/44TGX-4GE...
Layer 3, 20 or 48 ports GE/GX, 4 Combo,
SW3G-24/48TX/FX 4 x 10GE

Smart Solutions for Smart Networks—www.cxr.com

 DIN-rail Industrial and Hardened
Unmanaged Ethernet switches

SWD-I-8TX SWD-HE-8TX SWD-H-16TX

SWD-I-5TX SWD-H-8TX
MODELS SWD-I-8TX-F.. SWD-HE-6TX-F.. SWD-H-14TX-2F..
SWD-I-4TX-F.. SWD-H-8TX-F..
SWD-I-6TX-2F.. SWD-HE-6TX-2.. SWD-H-15TX-F..
MANAGEMENT Unmanaged
Maximum Number of ports 5 FE 9 FE 9 FE 8 FE 16 FE
Environment
Industrial -10 to 60°C √ √
Hardened -40 to 75°C √ √ √
Industrial IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
Train station EN50121-4
Power substation automation IEC61850-3
Ethernet ports
5 or 4 8 ou 6 8 8 or 6 16, 15 or 14
User ports
10/100BaseT 10/100BaseT 10/100BaseT 10/100BaseT 10/100BaseT
Optical fiber 100FX 0 or 1 0, 1 or 2 0, 1 or 2 0, 1 or 2 0, 1 or 2
Uplink 10/100/1000BaseT
Uplink 1000FX
Optical MM or SM10/20 MM or SM10/20 MM or SM10/20 MM or SM10/20 MM or SM10/20
Alarm contact - Yes Yes Yes Yes
Mechanical/Electrical
IP30 aluminium case IP30 aluminium case IP30 aluminium case IP30 aluminium case IP30 aluminium case
Format DIN-Rail DIN-Rail DIN-Rail DIN-Rail DIN-Rail
Fanless Fanless Fanless Fanless Fanless
Dimensions L x D x H mm 75,5 x 110 x 135 50 x 125 x 135 50 x 110 x 135 60 x 125 x 145 75,5 x 110 x 135
2 x 12-30Vcc 2 x 12-48Vcc 2 x 12-48Vcc 2 x 12-48Vcc
Power supply 12-48Vcc
jack 12Vcc jack 12Vcc jack 12Vcc jack 12Vcc
Performance
Address table size 2048 2048 2048 2048 4096
Packet Buffer Memory/bits 384K 768K 768K 448K 1,6M

PHYSICAL DESCRIPTION OF INDUSTRIAL DEVICES & COMPLIANCES

INDUSTRIAL Working temperature is -10 or -20°C to 60°C, during the manufacturing process each product is tested
from -20 to +70°C temperatures during 72 hours. Comply to CE, EMI/EMS EN61000-6-2/4 and FCC Part
15 Class A, Vibration/Chock IEC60068-2-6/32
HARDENED Working temperature is 40°C to 75°C, during the manufacturing process each product is tested from
-40 to +85°C temperatures during 72 hours. Comply to CE, EMI/EMS EN61000-6-2/4 and FCC Part 15
Class A, Vibration/Chock IEC60068-2-6/32

EN50121-4 These equipments comply to the environmental/electrical regulations applicable for railway stations.
EN50155 , These equipments comply to the environmental/electrical/vibration regulations applicable for railway
EN50121-3-2 rolling stock. They are using M12 Ethernet connectors.
IEC61850-3 & These equipments comply to the environment/electrical standard for the Electrical Power Substation
IEEE1613 Automation.

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-4-
 DIN-rail Industrial and Hardened
Layer 2 managed Ethernet switches

 Full Ethernet Layer2 stacks

with high level access security
 Alpha ring recovery < 15ms
and dual homing MSTP/RSTP

 Dual power input -12 to - 48Vdc

terminal block and
12Vdc jack with latch
 IP30 aluminum case with DIN-rail
fixing according to IEC60068

SWMD-I-8TX-2TGX SWMD-HT-8TX-2TGX
SWMD-HE-16TX SWMD-I-8TGX
SWMD-I-8TX-2GSF SWMD-HT-8TX-2GSF SWMD-I-16TX-T2GX SWMD-H-16TX
MODELS SWMD-HE-16TX-2G.. SWMD-I-6TGX-2G..
SWMD-I-6TX- SWMD-HT-6TX- SWMD-I-16TX-2G.. SWMD-H-16TX-2G..
SWMD-I-7TGX-G..
2FSF2GSF 2FSF2GSF
MANAGEMENT Layer 2 managed
Environment
Industrial -10 to 60°C
√ √
factory test at 70°C during 72h
Hardened -40 to 75°C
√ √ √
factory test at 85°C during 72h
Industrial
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
Railwail station EN50121-4 EN50121-4
Power substation automation IEC61850-3
Ethernet ports
Maximum throughput 8 FE + 2 GE 8 FE + 2 GE 16 FE + 2 GE 16 FE + 2 GE 16 FE + 2 GE 8 GE

8 x 10/100BaseT or 8 x 10/100BaseT or 16 16 16 8, 7 or 6
User ports
6 x 10/100BaseT & 6 x 10/100BaseT & 10/100BaseT 10/100BaseT 10/100BaseT 10/100/1000BaseT
100FX fiber ports 2 x 100FX SFP 2 x 100FX SFP

10/100/1000BaseT uplink 2 x 10/100/1000BaseT or 2 x 10/100/1000BaseT or 0 or 2 0 or 2 0 or 2

1000FX uplink 2 SFP 1000FX
0 or 2 SFP 2 SFP 1000FX
0 or 2 SFP 0 or 2 0 or 2 0 or 2 0 or 2
Optical SFP FX or GSX/GLX SFP FX or GSX/GLX MM or SM10/20 MM or SM10/20 MM or SM10/20 MM or SM10/20
Mechanical/Electrical
IP30 aluminium case IP30 aluminium case IP30 aluminium case IP30 aluminium case IP30 aluminium case IP30 aluminium case
Format DIN-Rail DIN-Rail DIN-Rail DIN-Rail DIN-Rail DIN-Rail
Fanless Fanless Fanless Fanless Fanless Fanless

Dimensions L x P x H 60 x 125 x 145 60 x 125 x 145 59 x 125 x 145 65 x 125 x 145 84 x 125 x 145 60 x 125 x 145

2 x 12-48Vcc 2 x 12-48Vcc 2 x 12-48Vcc 2 x 12-48Vcc 2 x 12-48Vcc 2 x 12-32Vcc

Power supply
jack 12Vcc jack 12Vcc jack 12Vcc jack 12Vcc jack 12Vcc jack 12Vcc
Performance
Mac address table size 4096 8192 8192 8192 8192 4096
Packet Buffer Memory/bits 2M 2M 2M 2M 2M 1M
Network redundancy & ring
STP/RSTP Yes
MSTP Yes
Alpha Ring < 15ms Yes
Management and network's protocols
VLAN VLAN per port and tagging 802.1q and GVRP
QoS 802.1p 802.1p with 4 priority queues
IGMP Multicast with IGMP Snooping V1,V2 and V3
Security of access 802.1x per port with Radius client, and per port up to 24 static Secure MAC adresses
Bandwidth Rate Control 802.3x ingress/egress flow control per port
Other protocols Truncking LACP, Port Mirroring, NTP client and NTP relay
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,

Management Consol port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP and CLI, Client and Server DHCP

Smart Solutions for Smart Networks—www.cxr.com

-5-
 19’’ 1U Industrial & Hardened
Layer 2 managed Ethernet switches
 Full Ethernet Layer2 stacks
with high level access security
 Alpha ring recovery < 15ms
and dual homing MSTP/RSTP

 Multiple fixed configurations on order up to

24 FE or FX SFP with 4 GE combo
 Compliance with the regulations in :
 Hardened switch, half 19” with bracket Intelligent traffic
for panel or 19” mounting Railway Stations
Electric Power Substation Automatic System
 12 FE and 2 GSX/GLX SFP uplink
 Support –40°C to +75°C tested at 85°
 Dual DC 48V power supplies
 Single or double AC or DC 48V power supplies

SWM-H-14TX SWM-H-24TX-4GX SWM-H-24FSF-4GX SWM-HE-24TX-4GX SWM-HE-24FSF-4CB

MODELS
SWM-H-12TX-2G.. SWM-H-24TX-4CB SWM-H-24FSF-4CB SWM-HE-24TX-4CB ….-16TX-8FSF-4CB

MANAGEMENT Layer 2 managed

Environment
Industrial -10 to 60°C
factory test at 70°C during 72h
Hardened -40 to 75°C
√ √ √ √ √
factory test at 85°C during 72h
Industrial
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
Railwail station EN50121-4
Power substation automation IEC61850-3
Ethernet ports
Maximum throughput 12 FE + 2 GE 24 FE + 4 GE 24 FX + 4 GE 24 FE + 4 GE 24 FX + 4 GE
14 or 12 24 24 or 16 24 24
User ports
10/100BaseT 10/100BaseT 100FX SFP 10/100BaseT 100FX SFP
100FX fiber ports
10/100/1000BaseT uplink 0 or 2 4 or 4 or 4 Combo
1000FX uplink 0 ou 2 SFP 4 Combo 4 Combo 4 Combo 10/100/1000BaseT
Optical SFP 1000SX/LX/ZX SFP 1000SX/LX/ZX SFP 1000SX/LX/ZX SFP 1000SX/LX/ZX SFP 1000SX/LX/ZX
Mechanical/Electrical
IP30 metal case IP30 metal case IP30 metal case
Format Optional Rail-DIN or 19" 1,25 U, 19" 1U 19" 1U
Fanless Fanless Fanless
442 x 250 x 44 single power 442 x 284 x 44 single power
Dimensions L x P x H 235 x 125 x 50 442 x 375 x 44 dual power 442 x 375 x 44 dual power
2 x 12-48Vcc AC, 2 AC, AC, 2 AC,
Power supply
jack 12Vcc DC48v ou 2DC48v DC48v ou 2DC48v
Performance
Mac address table size 8192 8192 8192
Packet Buffer Memory/bits 3M 3M 3M
Network redundancy & ring
STP/RSTP Yes Yes Yes
MSTP Yes Yes Yes
Alpha Ring < 15ms Yes Yes Yes
Management and network's protocols
VLAN VLAN per port and tagged 802.1q, GVRP
QoS 802.1p 802.1p with 4 priority queues
IGMP Multicast w IGMP Snooping V1,V2 et V3
Security of access 802.1x per port with Radius client, and per port up to 24 static Secure MAC addresses
Bandwidth Rate Control 802.3x administration for ingress/egress flow per port
Other protocols Truncking/MAC address, Port Mirroring, NTP client and relay
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,

Management Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP and CLI, Client and Server DHCP

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-6-
 Modular 19’’ 1U Hardened & Industrial
Layer 2 managed Ethernet switches

 Fully modular range of switches supporting up to

SWM-IE-M SWM-HE-M 24 FE/FX and 4 Combo
MODELS
plus modules plus modules  Full Ethernet Layer2 stacks with high level access
security
MANAGEMENT Layer 2 manageable  VLAN, QoS with 4 queues, IGMP snooping...
Environment
 Alpha ring recovery < 15ms and dual homing
Industrial -10 to 60°C
√ MSTP/RSTP
factory test at 70°C during 72h
Hardened -40 to 75°C
√ Compliance with regulations for:
factory test at 85°C during 72h
Industrial
IEC61000-6-2 EMC Generic Standard immunity for Industrial env.,
 ITS ‘’Intelligent traffic system’’
CE, FCC, UL608, NEMA TS1 & TS2
according to EN61000
Railwail station EN50121-4
Power substation automation IEC61850-3
 Railway-Tramway-Underground Stations
Ethernet ports according to EN50121-4
Maximum throughput 24 FE/FX + 4 GE  Automatic system in electrical substations
3 slots w ith a choice of 3 m odules: according to IEC61850/IEEE1613
User ports 8 x 10/100BaseT
10/100BaseT or 100FX 6 x 100FX fixed MM or SM
6 FE + 2 FX fixed M or SM  Support –40°C to +75°C
1 slot w ith a choice of 2 m odules:
and tested during the manufacturing process at
Uplink ports 85°C
4 x 10/100/1000BaseT
4 GE or 4 GSX/GLX 4 Com bo 100/1000Baset and GSX/GLX SFP  Uplink module (1 slot):
Mechanical/Electrical  4 x 10/100/1000BaseT ports
IP30 metal case IP30 metal case
Format 19" 1U 19" 1U  4 ports Combo 10/100/1000BaseT and
Fanless Fanless 1000FX SFP
Dimensions L x P x H 442 x 343 x 44 mm
442 x 343 x 44 single power  Tributaries modules :
442 x 375 x 44 dual power
AC, 2 AC,  8 ports 10/100BaseT
Power supply AC or DC48v
DC48v or 2DC48v  6 ports 100FX fibre fixe
Performance
Mac address table size 8192
 6 ports 100FX fibre fixe et 2 10/100BaseT
8192
Packet Buffer Memory/bits 3M 3M  Single or dual AC or DC 48V power supplies
Network redundancy & ring  SWM-IE-M version supports –20 to +60°C
STP/RSTP Yes Yes
 SWM-HE-M version supports –40 to +75°C
MSTP Yes Yes
Alpha Ring < 15ms Yes Yes
Management and network's protocols
VLAN VLAN per port and tagged 802.1q, GVRP
QoS 802.1p 802.1p with 4 priority queues
IGMP Multicast w IGMP Snooping V1,V2 et V3
Security of access 802.1x per port with Radius client, and per port up to 24 static Secure MAC addresses
Bandwidth Rate Control 802.3x administration for ingress/egress flow per port
Other protocols Truncking/MAC address, Port Mirroring, NTP client and relay
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,
Ethernet
Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser,
Management
TFTP and CLI, Client and Server DHCP

Smart Solutions for Smart Networks—www.cxr.com

-7-
 Layer 2 Ethernet switches for Railway Rolling
stock Material EN50155 and IP67
CXR supplies Ethernet copper extenders and Ethernet switches design to be mounted inside the rolling stock material:
railway, tramway or underground. These equipments are compliant with the EN50155 and EN50121-4 and support high
level of EMC and vibration constraints. Extenders use twisted pair or coax in VDSL or MSDSL to connect switches and carry
voice, video, data and power-feed Wifi AP.
MODELS SWMP-HR-8TPM-2GM SWMP-H67-8TM8TPM-2GM
MANAGEMENT Layer 2 managed
Environment
Hardened -40 to 75°C
√ √
factory test at 85°C during 72h
IEC61000-6-2 EMC Generi c Sta nda rd i mmuni ty for Indus tri a l env.,
Industrial
CE, FCC, UL608, NEMA TS1 & TS2
EN50155 EN50155
Railwail station
EN50121-3-2 EN50121-3-2
Ethernet ports
Maximum throughput 8 FE + 2 GE 16 FE + 2 GE
8 x 10/100BaseT 16 x 10/100BaseT
User ports
with M12 connector with M12 connector
8 POE 802.3at 30W ports
10/100BaseT POE PsE 802.3at 8 ports at 30W
& 8 ports non poe The SWMP-HR-8TPM-2GM switch have been developed to
10/100/1000BaseT uplink 2 x 10/100/1000BaseT or 2 x 10/100/1000BaseT or
2 x 1000GSX or GLX in LC, 2 x 1000GSX or GLX in LC, be used inside the rolling stock railway or subway. It con-
1000FX uplink w M12 connector w M12 connector centrate Ethernet flow and provide POE to power the cam-
Alarm contact Yes - setup for power and port link failure era, the Wifi hot-spots and all Ethernet probes. It comply to
Mechanical/Electrical the EN50155 and the EN50121-3-2 environmental require-
IP50 metal case, IP67 metal case,
Format panel mounting, Fanless panel mounting, Fanless ments. FE/GE copper and GSX/GLX LC fiber ports are pro-
Dimensions L x P x H mm 288 x 161,5 x 64 258 x 83,5 x 228 vided with M12 waterproof connectors and power supply
2 x 24-48Vcc 2 x 12-48Vcc ou 2 x AC, are connected over M23, both with high level of security
Power supply
with M23 connector with M23 connector against vibrations.
Performance
Mac address table size 8192 8192
Packet Buffer Memory/bits 2M 2M
Network redundancy & ring
STP/RSTP/MSTP Yes
Alpha Ring < 15ms Yes
Management and network's protocols
VLAN VLAN per port and tagging 802.1q and GVRP
QoS 802.1p 802.1p with 4 priority queues
IGMP Multicast with IGMP Snooping V1,V2 and V3
Security of access 802.1x per port with Radius client, per port 24 static Secure MAC adresses
Bandwidth Rate Control 802.3x ingress/egress flow control per port
Other protocols Truncking LACP, Port Mirroring, NTP client and NTP relay
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex,
Ethernet
Auto-negotiation, MDI/MDIX, Wire-Speed tranfer,
Management Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web, TFTP and CLI
The SWMP-HR67-8TM8TPM-2GM is an IP67 graded hard-
ened switch used in railway or subway rolling stock and
powered in AC or DC. His strong waterproof case with M12
and M23 connectors protects the Ethernet switch from
humidity, the dust and maintains cables against vibrations
in hostile environment of traction machines and wagons.
Transmission and power supply of IP cameras and Wifi The POE version powerfeeds up to 8 Ethernet devices like
Access Points are provided by SWMP-HR67-8TM8TPM- AP, VoIP phones, Ethernet PLC… This switch complies to
2GM. The switches are interconnected over coax cable the EN50155 and the EN50121-3-2 environmental require-
with Ethernet over VDSL COAX-HR-TM up to 85Mbps. ments to be used in rolling stock material.

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-8-
 Ethernet switch for Rolling coach & Bus,
E-Mark approval
SWD-I-4TPS-4TX SWD-H-4TPS-4TX
MODELS
SWD-I-4TPS-3TX-F SWD-H-4TPS-3TX-F
MANAGEMENT AUTOMATIC
Environnemental
Port capacity 8 FE 8 FE
Industrial -10 at 60°C
√
Factory test -20 at 70°C
Hardened -40 at 75°C
√
Factory test -40 at 85°C
Industrial compliance IEC61000-6-2 Industrial generic, CE, FCC, UL608, NEMA TS1 & TS2
Inside Coach and Bus Qualification E-MARK 10
Ethernet ports
10/100BaseT POE PsE 802.3af 4 or 3 4 or 3
10/100BaseT POE PsE 802.3af 4 ports at 15,4W 4 ports at 15,4W
SWD-I-4TPS-4TX and SWD-H-4TPS-4TX .
Optical ports 100FX 0 or 1 fixed SC or ST 0 or 1 fixed SC or ST
Theses POE switches and 12 to 48V converters have
Alarm relay Yes set up per port or power supply
got the E-Mark approval and can be installed in Buses
Physical / Electrical
or Coaches and in order to support IP cameras and
Casing IP30 aluminium, Rail-DIN, Fanless IP30 aluminium, Rail-DIN, Fanless
ticketing machines.
Dimensions W x D x H mm 62 x 110 x 135 60 x 125 x 145
Power supply, 2 redundant 2 x 48Vcc, jack 48Vcc 2 x 48Vcc, jack 48Vcc They provide POE power over Ethernet ports to power
Consumption w:o POE / w POE 10 W / 72 W 10 W / 72 W feed Ethernet equipments.
Performances
MAC address table size 1024 1024
Packet buffer memory (Bits) 1M 1M

SWEDD-xxxx-C Hybrid Layer 2 switches

with SyncE and PTP IEEE1588v2
SWEDD-4TGX4GSX-C
MODELS SWEDD-4TGX4GSF SWEDD-4TGX4GSF-C SWEDD-xxxx-H
This Hybrid Gigabit Ethernet switch
MANAGEMENT Layer 2 managed
Environnemental
is carrying pure Ethernet flows,
Standard -5 to 50°C √ √ encapsulated RS232/RS485 and Dry
Hardened -20 to 70°C √ Contacts over Gigabit network.
Industrial CE, FCC This Gigabit Ethernet switch is sup-
Power substation automation IEC61850-3, IEEE1613 plied in option with 2 GE SFP WAN,
WAN, LAN Ethernet ports and encapsulated ports 6 GE LAN and 2 Combo LAN.
Maximum throughput 8 GE 8 GE 8 GE
WAN ports 2 SFP 1000SX/LX 2 SFP 1000SX/LX 2 SFP 1000SX/LX Thanks to the OAM support it is a
10/100/1000Baset LAN ports 4 4 4
real Ethernet Demarcation Device.
10/100/1000Baset POE PSE ports Option 2 port POE Option 2 port POE Option 2 port POE
1000SX/LX LAN port 2 SFP 1000SX/LX 2 SFP 1000SX/LX 2 SFP 1000SX/LX
Support of SyncE network and PTP
Asynchronous ports Option 4 RS232/RS485 Option 4 RS232/RS485 Option 4 RS232/RS485
1588 slave functions provides fre-
Input/Output dry contacts Option 2 In 2 Out Option 2 In 2 Out Option 2 In 2 Out
quency and Phase synchronization
Mechanical/Electrical
on tributaries to synchronize IP
Format IP30 metal case, DIN-rail, Fanless
67,2 x 167 x 219
radio-truncking BTS or PLC.
Dimensions L x P x H
Power supply Dual power DC 18-36Vdc or 36-72Vdc plus POE power -44 to -57Vdc An hardened version is also avail-
Performance able.
MAC address table 8192
Switching capacity 10 Gbps
Network redundancy & ring This device is used for
STP protocols STP/RSTP/MSTP - Intelligent Traffic System,
Ring protection LEAPS and IUT G.8032 - High level of automatism system,
Management and network's protocols - Telcos for IP BTS
VLAN VLAN per port and 802.1q tagging - ...
QoS 802.1p 802.1p with 4 queues of priority
Security of access 802.1x per port w Radius client, 16 secure MAC addresses
Bandwidth Rate Control 802.3x ingress/egress flow limitation per port
Ethernet 10/100Mbps auto-rate, auto Full/Half Duplex, MDI/MDIX, Wire-Speed tranfert
RS232 encapsulation Raw-TCP
Synchronization SyncE WAN ports and PTP Slave IEEE 1588 v2
Management Over LAN and WAN in SSHv2,Web browser HTTP/HTTPS, SNMP v1/2/3, FTP

Smart Solutions for Smart Networks—www.cxr.com

-9-
 Hybrid Ethernet/FO/G.Shdsl w RS232/485
Layer 2 managed switches

CopperWAY- CopperWAY- CopperWAY- CopperWAY-

CopperLAN-Bis- CopperWAY-Bis- CopperWAY-Bis-
MODELS Bis-2W Bis-2W Bis-4W Bis-4W
MCx 2TTX SFP-HV
-MC -4RS-MC -MC -4RS-MC
MANAGEMENT Layer 2 managed
Environnemental
Industrial -10 to 60°C √ - - - - - -
Industrial -20 to 65°C - √ √ √ √ √ √
Industrial CE, FCC
WAN, LAN Ethernet ports and encapsulated ports
Maximum throughput 4 FE + 1 FE/DSL 2 FE + 2 FE/DSL 6 FE + 2 FE/DSL 6 FE + 2 FE/DSL 1GE+ 2 FE + 2 FE/DSL
User ports 4 2 4 4 4
10/100Baset POE PSE ports include 1 POE PsE 802.af - include 1 POE PsE 802.af include 1 POE PsE 802.af
Fiber ports - - 2 x 100FX SFP 2 x 100FX SFP 1 x 1000GSX/GLX SFP
Ethernet/EFM/G.SHDSL .Bis 1 port w 2/4 wires 2 ports w 2 wires 2 ports w 2 wires 2 ports w 2/4 wires 2 ports w 2/4 wires

DSL line isolation - - - - 10KV

Coding TC-PAM TC-PAM16/32/64/128 TC-PAM16/32/64 TC-PAM16/32/64 TC-PAM16/32/64/128
Maximum rate per direction 11,4 Mbps 15 Mbps 11,4Mbps 22 Mbps 11,4 Mbps
1 RS232/RS485 1 RS232/RS485
Asynchronous ports 1 RS232 1 RS232 - - 1 RS232
+ 3 RS232 + 3 RS232
Input/Output dry contacts - - - 2 In 2 Out 2 In 2 Out 2 In 2 Out
Mechanical/Electrical
IP30 metal case IP30 metal case IP30 metal case IP30 metal case IP30 metal case
Format
DIN-rail, Fanless DIN-rail, Fanless DIN-rail, Fanless DIN-rail, controled fan DIN-rail, controled fan
Dimensions L x P x H 41 x 120 x 170 45 x 140 x 155 44x 144 x 154 44x 144 x 154 70x 150 x 280
MC2= 9-36Vcc
Power supply 9-36Vcc 2 x 9-55Vcc 2 x 9-55Vcc 9-36Vcc
MC1- 36-72V
Performance
MAC address table 1024 1024 8192 8192 8192
Frame buffer/bits 512K 512K 1M 1M 1M
Network redundancy & ring
STP/RSTP STP STP/RSTP
Management and network's protocols
VLAN per port and
VLAN VLAN per port and 802.1q tagging
802.1q tagging, Q-in-Q
QoS 802.1p w 2 priority queues 802.1p with 4 queues of priority
Security of access 802.1x per port w Radius client, 16 secure MAC addresses
Bandwidth Rate Control 802.3x ingress/egress flow limitation per port
Ethernet 10/100Mbps auto-rate, auto Full/Half Duplex, MDI/MDIX, Wire-Speed tranfert
RS232 encapsulation Raw-TCP/UDP Raw-TCP, HNZ, Bloc Message, COM port according to RFC2217 compatible w Tactical's Serial IP
Console port RS232 USB RS232 USB

Management Over console port LAN and WAN in SSH, SNMP V2, Web browser HTTP/HTTPS, FTP

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-10-
CopperWAY-Bis Hybrid Ethernet/FO/G.Shdsl
Layer 2 switches with RS232/485 and contact
The CXR CopperWay-Series is a range of Hybrid Ethernet switches. They are mainly used in
Transportation for road infrastructure, traffic light, CCTV and for Utilities Smart Grid or
production application. These switches are Hybrid because they are interconnected with fibers
and with DSL over coppers, but also because they support not only Ethernet or Ethernet POE but
also asynchronous links RS232/RS485 and Dry Contacts encapsulated over IP.
The new CopperWAY-Bis-HV range with its 10KV isolation is over suited for the Electricity
distribution to run in 20KV electrical sub-stations and carry especially SCADA, information from
and to electricity meters.

1 or 4 optional 6 input, 2 output

RS232/RS485 optional dry contacts

CopperWAY-Bis
Hybrid interconnection/transport
over Ethernet copper 100Baset, Ethernet fiber
100FX and GSHDSL.bis EFM at 5.6Mbps to 22Mbps
over 2 or 4 wires up to 10km.
Hybrid tributaries
4 Ethernet ports with one Ethernet POE PSE,
4 asynchronous RS232/RS485 ports
6 Dry Contact Inputs and 2 Outputs.
Supports Bus and Ring RSTP structure. 4 LAN
A complete Layer2 switch, with VLAN, QoS… 10/100BaseT

2 WAN G.SHDSL-Bis 2 WAN SFP

2/4 wire up to 22Mbps 100FX

CopperWAY-Bis-2TTX
Bottom of the range product
with 2 GSHDSL.bis EFM up to 15Mbps over 2 wires up to 10km.
Two Ethernet ports and one asynchronous RS232 port
Supports Bus and Ring RSTP structure.Layer2 switch, with VLAN, QoS…

AMS16 and SpeederLAN card

The chassis supporting DSL, fiberoptic, TDM (E1,E3, X21, V35..)
SpeederLAN cards support Ethernet over 1, 2, 4 and 8 pairs bounding
This solution can concentrate up to 16 SpeederLAN-Bis-2x2 cards up to
64 distant CopperWAY-Bis.…

The HV range,
isolated DSL at 10KV
CopperWAY-Bis-SFP-HV
Ethernet switch GSHDSL.bis modem for 20KV electric substation
with 2 GSHDSL.bis EFM up to 11Mbps with 2 wires isolated at 10kV.
1 Gigabit Ethernet SFP and 4 Ethernet ports and 1 RS232 ports
Supports Bus and Ring RSTP topology. Layer2 switch, with VLAN, QoS…

MV16HV
This chassis provides the isolation for 16 pairs at 10kV
this chassis Is used in DSL concentration sites for power companies to iso-
late the GSHDSL or GSHDSL.bis lines before the connection to the Speed-
erLAN cards fitted in AMS16 chassis.

Smart Solutions for Smart Networks—www.cxr.com

-11-
 Industrial and carrier Ethernet
Layer 2 managed switches - FTTb

MODELS SWM-8TX-UCB SWM-24TX-2UCB SWM-24TGX-4GSF

MANAGEMENT Layer 2 managed
Environment
Industrial -10 to 60°C √ √ √
Industrial IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE
Ethernet ports
Maximum throughput 8 FE + 1 GE 24 FE + 2 GE 24 FE + 2 GE
8 24 24
User ports
10/100BaseT 10/100BaseT 10/100/1000BaseT
1 Universal Combo 2 Universal Combo
4 SFP 1000SX/LX/ZX
Uplink FE/GE/FX/GX 10/100/1000BaseT + 10/100/1000BaseT +
by SFP
SFP 100FX/1000SX/LX SFP 100FX/1000SX/LX
Mechanical/Electrical
Format 19'' 1U w brackets 19'' 1U w brackets 19'' 1U w brackets
Dimensions L x P x H 205 x 130 x 40 mm 440 x 192 x 44 mm 440 x 290 x 44 mm
Power supply AC or DC 36-72v AC or DC 36-72v AC or DC 36-72v
Performance
Mac address table size 8K 8K 16K
Packet Buffer Memory/bits 3,6 Gbps 8,8 Gbps 56 Gbps
Network redundancy & ring
STP/RSTP Yes
MSTP Yes
Protection Ring < 50ms Yes Yes G8032
Port Mirroring 1:1 and 1:n
Management and network's protocols
VLAN VLAN per port and tagged 802.1q , S-VLAN/C-VLAN Q-in-Q and GVRP
QoS 802.1p Per port, tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class, 4 priority queues idem with 8 queues
IGMP Multicast w IGMP Snooping V1,V2 and V3, IGMP Proxy, IGMP fast leave, Inter-VLAN multicast dupplication
Security of access 802.1x per port w Radius client, ACL … please see datasheet
Bandwidth Rate Control 802.3x for ingress/egress flow per port
Other protocols DHCP server/relay and option 82, LACP truncking, NTP client and relay…
IP routing Static routing
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Management Over console port or LAN or WAN with Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP et CLI

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-12-
 Layer 2 and 3 managed Switches/Routers
Carrier Ethernet - GE/10GE MEF 9 &14

SW3L-24TX-2GSF-2UCB SW3L-48TX-2GSF-2UCB SW3G-20TGX-4UCB SW3G-24TGX-4UCB

MODELS or or or or
SW3L-24FSF-2GSF-2UCB SW3L-48FSF-2GSF-2UCB SW3G-20USF-4UCB SW3G-44TGX-4UCB
Management and network's protocols Layer 3 manageable Layer 3 manageable
Environmental
Working temperature
√ √ √ √
-10 à 55°C
Industrial IEC61000-6-2 , CE
Ethernet ports
Maximum throughput 24 FE + 4 GE 48FE + 4 GE 24 GE + 4 10GE 48 GE + 4 10GE
24 x 10/100BaseT 48 x 10/100BaseT 20 x 10/100/1000BaseT 44 x 10/100/1000BaseT
User ports or or or 20 SFP or 44 SFP
24 x 100FX SFP 48 x 100FX SFP 100FX/1000SX/LX/ZX 100FX/1000SX/LX/ZX
2 Universal Combos
10/100/1000BaseT + SFP 4 Universal Combos
Uplink FE/GE/FX/GX 4 SFP 100FX/1000SX/LX
100FX/1000SX/LX 10/100/1000BaseT and SFP 100FX/1000SX/LX
and 2 SFP 1000SX/LX
Uplink 10 GE - - Maximum 4 x 10GE: 2 optional modules of 2 10G
Mechanical/Electrical UP-S36-2XFP module with 2 XSFP slots
Format 19'' 1U 19'' 1U 19'' 1U 19'' 1U
Dimensions L x P x H
Power supply AC or DC 36-72v AC or DC 36-72v 2 modules AC or DC 36-72v
Performance
Mac address table size 8172 8172 32688 32688
Switching/ backplane 12,8Gbps/32Gbps 17,6Gbps/32Gbps 96Gbps / 128Gbps 128Gbps / 176Gbps
Network redundancy & ring
STP/RSTP/MSTP Yes Yes
Ring Protection < 50ms Yes: ESR ring, R-link Yes: ESR ring, R-link
G.8031/G.8032 - Yes
VRRP Yes Yes
Management and network's protocols
Routing Static routing and VLAN routing, RIP 1&2, OSPF v2, BGP v4 Static routing and VLAN routing, RIP 1&2, OSPF v2, BGP v4
VLAN VLAN per port and tagging 802.1q , S-VLAN/C-VLAN Q-in-Q and GVRP
QoS 802.1p Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class, 8 priority queues
IGMP Multicast avec IGMP Snooping V1,V2 and V3, Inter-VLAN multicast dupplication
Security of access 802.1x per port with Radius Client, ACL … see datasheet
Bandwidth Rate Control 802.3x administration for ingress/egress flow per port
Other protocols DHCP server/relay and option 82, LACP truncking, NTP client and relay…
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Management Over console port or LAN or WAN with Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP et CLI
MEF and cross-administration MEF 9, MEF 14, OAM Ethernet , 802.3ah, Y.1731, IEEE802.1ag

Smart Solutions for Smart Networks—www.cxr.com

-13-
 Layer 2 to 4 Terabit Routing Switches
High density GE/10GE - MPLS

MODELS SW3R-03 SW3R-06 SW3R-12

Modular system
Main control card slots 2 2 2
Services card slots 3 8 12
Power supply slots 3 6 6
Fan slots 1 3 4
Capacity
Backplane capacity 2 Tbps 6 Tbps 6Tbps
Switching capacity 1,92 Tbps 1,25/2,56 Tbps 1,92/3,84 Tbps
Maximum throughput 1 440 Mbps 960 /1 920 Mbps 1 440 / 2 880 Mbps
Maxi nb of 10GE ports 96 x 10GE 128 x 10GE 192 x 10GE
Maxi nb of GE ports 144 GE 384 GE 576 GE
Service 10 GE card Card with 4 optical 10GE ports with SFP+
Service GSX/GLX/GZX card Card with 48 optical GE ports with SFP
Service Copper card Card with 48 10/100/1000BaseT ports RJ45
Mechanical/Electrical
Format 19'' 5U 19'' 13U 19'' 16U
Dimensions L x P x H 440 x 478,3 x 220 440 x 460 x 574 440 x 460 x 710
Power supply AC or DC -48 to -60v AC or DC -48 to -60v AC or DC -48 to -60v
Network redundancy & ring
STP STP/RSTP/MSTP
BPDU, protection, root protection, loop protection, BDPU tunnel
Ring protection G.8032 with 50ms recovery
VRRP VRRP and BFD for VRRP
Management and network's protocols
IPv4 and IPv6 Static routing.
IP Routing
IPv4 routing: RIP 1&2, OSPF v2, BGB v4 and IS-IS. IPv6 routing: RIPng, OSPF v3, BGP v4+, ISIS v6
MPLS Static LSP, static VLAN to MPLS mapping. L2VPN, L3VPN. MPLS OAM
VLAN Access, Trunk and Hybrid VLAN. VLAN per port and tagging 802.1q , S-VLAN/C-VLAN Q-in-Q
QoS 802.1p Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class on layer2/3/4, 8 priority queues
IGMP and IGMP Snooping V1,V2 and V3, Inter-VLAN multicast dupplication.
Multicast
PIM-DM, PIM-SM, PIM-SSM. Multicast ACL, Multicast VPN
Security of access 802.1x per port with Radius/TACACS client, ACL … see datasheet
Bandwidth Rate Control 802.3x administration for ingress/egress flow per port
Other protocols DHCP server/relay and option 82, LACP truncking, NTP client and relay…
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Administration Over consol port/LAN/WAN with Telnet/SSH, SNMP V1/V2/V3, RMON,TFTP et CLI
OAM OAM Ethernet , 802.3ah, Y.1731, IEEE802.1ag

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-14-
 SFP /SFP+ / XSF
100FX, 1000GX, 10GE, WDM, CWDM & DWDM

100FX, STM1-OC3 SFP MODULE, support E1/E3 of CXR FO and MX devices, Standard range -5 to +70°C
SFP-STM1-MM-850 SFP module 100FX, STM1 - OC3 multimode 850nm, compatible w ith FO-xxxxx-MM, LC
SFP-STM1-MM2 SFP module 100FX, STM1 - OC3 multimode 1310 for 2km, LC WDM SFPs are use in pairs:
SFP-STM1-SM30 SFP module 100FX, STM1 - OC3 single mode 1310 for 30km, LC, w ith DDM
- first side should be a version
SFP-STM1-SM60 SFP module 100FX, STM1 - OC3 single mode 1310 for 50km, LC
W3 transmitting at 1310nm
SFP-STM1-SM100-15 SFP module 100FX, STM1 - OC3 single mode 1550 for 100km, LC, w ith DDM
- second side should be a ver-
SFP-STM1-SM120-15 SFP module 100FX, STM1 - OC3 single mode 1550 for 120km, LC, w ith DDM
sion W5 transmitting at 1550nm
SFP-STM1-SM160-15D SFP module 100FX, STM1 - OC3 single mode 1550 for 160km, LC, w ith DDM, L-4.2
They use a single core fiber and
SFP-STM1-SM200-15D SFP module 100FX, STM1 - OC3 single mode 1550nm w 46 to 50dB budget for 200km, LC, w ith DDM, L-4.2 then the LC connector is sim-
SFP-STM1-SM15-W13 SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 15km, LC Bidi, w ith DDM plex or named LC Bidi.
SFP-STM1-SM15-W15 SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 15km, LC Bidi, w ith DDM
SFP-STM1-SM60-W13 SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 60km, LC Bidi, w ith DDM
The CWDM SFP are available in
SFP-STM1-SM60-W15 SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 60km, LC Bidi, w ith DDM
18 colors, to be specified on
100FX, STM1-OC3 SFP MODULE, support E1/E3 of CXR FO and MX devices, Extended Tem perature -40°C to +85°C
ordering
SFP-STM1-MM-H SFP module 100FX w DD, multimode 1310nm portée 2 km, connector LC, -40°C-85°C
SFP-STM1-SM30-H SFP module 100FX w DD, single-mode 1310nm, budget for 30km , connector LC, -40°C-85°C
SFP-STM1-SM15-W13H SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 15km, LC Bidi, w ith DDM The DWDM SFP are available in
SFP-STM1-SM15-W15H SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 15km, LC Bidi, w ith DDM
the C-Band colors to ITU chan-
1000SX/LX/ZX and 100FX SFP MODULE, Standard range -5 to +70°C
nel, to be specify on ordering
SFP-GSX-MM SFP module 1000SX/100FX w DD, multimode 850nm, budget 8,0dB for 550m, connector LC
SFP-GSX-MM-1310 SFP module 1000SX/100FX w DD, multimode 1310nm, budget 16,0dB for 2km, connector LC
SFP-GLX-SM20 SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 17,0dB for 20km , connector LC
SFP-GZX-SM50 SFP module 1000ZX/100FX w DD, single-mode 1550nm, budget 19,0dB for 50km , connector LC
SFP-GZX-SM80 SFP module 1000ZX/100FX w DD single-mode 1550nm, budget 24,0dB for 80km , connector LC
SFP-GZX-SM120 SFP module 1000ZX/100FX w DD single-mode 1550nm, budget 24,0dB for 80km , connector LC
SFP-GLX-SM20W13 SFP module 1000LX/100FX w DD, single-mode 1310nm WDM single fiber, budget 12,0dB for 20km , LC Bidi.
SFP-GLX-SM20W15 SFP module 1000LX/100FX w DD, single-mode 1550nm WDM single fiber, budget 12,0dB for 20km , LC Bidi.
SFP-GZX-SM60W13 SFP module 1000LX/100FX w DD, single-mode 1310nm WDM single fiber, budget 24,0dB for 60km , LC Bidi.
SFP-GZX-SM60W15 SFP module 1000LX/100FX w DD, single-mode 1550nm WDM single fiber, budget 24,0dB for 60km , LC Bidi.
SFP-GZX-SM80W1490 SFP module 1000LX/100FX w DD, single-mode 1490nm WDM single fiber, budget 24,0dB for 80km , LC Bidi.
SFP-GZX-SM80W1570 SFP module 1000LX/100FX w DD, single-mode 1570nm WDM single fiber, budget 24,0dB for 80km , LC Bidi.
1000SX/LX/ZX and 100FX SFP CWDM / DWDM MODULE, Standard range -5 to +70°C
SFP-GLX-SM80-Cxx SFP module 1000LX/100FX w DD, CWDM lambda au choix de 1430 to 1610nm, budget 24,0dB for 80km, LC
SFP-GLX-SM120-Cxx SFP module 1000LX/100FX w DD, CWDM lambda, choice from 1430 to 1610nm, budget 32dB for 120km, LC
SFP-GLX-SM150-Cxx SFP module 1000LX/100FX w DD, CWDM lambda, choice from 1430 to 1610nm, budget 37dB for 150km, LC
SFP-GLX-SM80-Dxx SFP module 1000LX/100FX w DD, DWDM lambda au choix de 1430 to 1610nm, budget 24,0dB for 80km, LC
SFP-GLX-SM120-Dxx SFP module 1000LX/100FX w DD, DWDM lambda, choice from 1430 to 1610nm, budget 32dB for 120km, LC
1000SX/LX/ZX and 100FX SFP MODULE, Extended Tem perature -40°C to +85°C
SFP-GSX-MM-H SFP module 1000SX/100FX w DD, multimode 850nm, budget 8,0dB for 550m, LC, w orking temp. -40°C to +85°C
SFP-GSX-MM-1310H SFP module 1000SX/100FX w DD, multimode 1310nm, budget 16,0dB for 2km, LC, w orking temp.-40°C to +85°C
SFP-GLX-SM10-H SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 13,0dB for 10km , LC, w orking temp. -40°C to +85°C
SFP-GLX-SM20-H SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 17,0dB for 20km , LC, w orking temp-40°C to +85°C
COPPER SFP MODULE, Standard range -5 to +70°C
SFP-TTX SFP module for 100FX slot to copper Ethernet 100BaseT RJ45
SFP-TGTX SFP module for 1000FX slot to copper Ethernet 10/100/1000BaseT RJ45
XFP 10GE module standard range -10 à +70°C
XFP-10G-SR-MM XFP 10GE-LS module multi-mode 850nm, budget for 300m, LC/PC connector.
XFP-10G-LR-SM10 XFP 10GE-LR module singlemode 1310nm, budget for 10km, LC/PC connector.
XFP-10G-ER-SM40 XFP 10GE-ER module singlemode 1310nm, budget for 40km, LC/PC connector.
XFP-10G-ZR-SM80 XFP 10GE-ZR module singlemode 1550nm, budget for 80km, LC/PC connector.
XFP-10G-ZR-SM80-Cxx XFP 10GE-ZR module singlemode CWDM lambda Cxx, budget for 80km, LC/PC connector.
SFP Plus 10GE module standard range -10 à +70°C
SFP-10G-SR-MM SFP+ 10GE-LS module multi-mode 850nm, budget for 300m, LC/PC connector.
SFP-10G-LR-SM10 SFP+ 10GE-LR module singlemode 1310nm, budget for 10km, LC/PC connector.
SFP-10G-ER-SM40 SFP+ 10GE-ER module singlemode 1550nm, budget for 40km, LC/PC connector.
SFP-10G-ZR-SM80 SFP+ 10GE-ZR module singlemode 1550nm, budget for 80km, LC/PC connector.
SFP-10G-ER-SM40-Cxxx SFP+ 10GE-ER module singlemode CWDM color Cxx , budget 14 to 18dB for 40km, LC/PC connector.
SFP-10G-ZR-SM80-Cxxx SFP+ 10GE-ER module singlemode CWDM color Cxx , budget for 80km, LC/PC connector.
OTHER SFP MODULES
SFP-STM1/4-xx SFP module 100FX, STM1/STM4 -OC3/OC12 LC, w ith DDM
SFP-STM16-xx-D SFP module STM1/STM4/STM16 or OC3/OC12/OC48 , w ith DDM

Smart Solutions for Smart Networks—www.cxr.com

-15-
 Distribution of Ethernet POE
CXR offers a port folio of solutions to distribute together Ethernet/IP data and power over the Ethernet line as POE
Ethernet. Mainly used to deploy IP-camera, IP-phone, Wifi hot-spot, this technology can power many new products. These
are used in transportation (bus, train, road, airport), by energy suppliers/transporter, and in many industries as the
security survey In-door or Out-door.

ETHERNET POE
POE PsE port This Power Sourcing Ethernet port feature supplies 48V power over the line to power feed
another equipment at the end of the line.
POE PD port Device connected to POE port powered from the line, it is a Powered Device.
IEEE802.3af Regulation describes the power feeding over Ethernet lines: The PsE port should supply 48v
(44 to 57V) with 15,4W and 350mA. The PD port should receive 37 to 57V w a maximum of
12,95W. Lower level are accepted particularly for Cat3 cables. Four class 0, 1 ,2, 3 de-
scribe this levels.
IEEE802.3at This class 4 regulation involves higher power. PsE should supply 30/34,2W and PD will re-
ceive 25,5W.
POL Power Over Line: In one pairs of DSL modems, the local modem is power-feeding the re-
mote modem over the line. The remote modem could be POE PSE of his local Ethernet
ports. The distance is limited by the temperature dispersion as the copper diameter is
smaller.

Power supplies for switches and converters

with Industrial & Hardened casing
CXR offers AC/DC and DC/DC converters to
power our range of switches and Ethernet
converters. For selection please consider:
 Voltage and power requirements.
 Connection: terminal block, self blocking
jack or standard jack.
 Din-rail/desktop/single block and working
temperature

ACDC-48V-35W AC to DC 48V 35W adapter for MD, FO, CV, TS, CIP delivered in 48V (include 1200000112+7055140107)

PS-DIN-12V-40W AC/DC DIN rail pow er 40W, Input 85 to 264Vac, output on terminal block 12V 0 to 3,33A , L x H x D =40x90x100
PS-DIN-12V-75W AC/DC DIN rail pow er 75W, input 85 to 264Vac, output on terminal block 12V 0 to 6,3A , L x H x D =55x125,2x100
PS-DIN-12V-120W AC/DC DIN rail pow er 120W, input 85 to 264Vac, output on terminal block 12V 0 to 10A , L x H x D =65x125,2x100
PS-DIN-24V-30W AC/DC DIN rail pow er 30W, input 85 to 264Vac, output on terminal block 24V 0 to 1,5A , L x H x D =78x93x56
PS-DIN-24V-240W AC/DC DIN rail pow er 240W, input 88 to 264Vac, output on terminal block 24V 0 to 10A , L x H x D =63x125,2x113,5

ACDC-I-5V-9W-J25 AC to 5V DC 9W at -20 to 60°C, standard jack 2.5mm for FOC/FOCM and FOCD-I, AC cord IEC320/C3, plastic case
ACDC-I-48V-36W-J21 AC to 48V DC 36W at 0 to 40°C, 28W up to 50°C, 5.5/2.5mm standard jack for FOCD-I-TPS, DC cord 1.2m, AC cord IEC320/C8 1.5m w ith
European plug, plastic case
ACDC-I-48V-36W-J21UK AC to 48V DC 36W at 0 to 40°C, 28W up to 50°C, 5.5/2.5mm standard jack for FOCD-I-TPS, DC cord 1.2m, AC cord IEC320/C8 1.5m w ith
UK plug, plastic case
ACDC-H-12V-36W-P-JB AC to 12V 3A for Rail-DIN sw itch SWD-H and SWM-H , w orking temperature -40 to +75°C w jack , plastic case
ACDC-H-12V-36W-M-JB AC to 12V 3A for for Rail-DIN sw itch SWD-H and SWM-H , w orking temperature -40 to +75°C w jack , metal case w fixation
ACDC-I-24V-30W-DP AC to 24v 1,5A Adaptator for sw itch, w orking temperature -20 to +60°C block terminal, plastic box w ith DIN rail fixing
ACDC-48V-75W-DM AC to 24v 1,5A Adaptator for sw itch, w orking temperature -20 to +60°C block terminal, plastic box w ith DIN rail fixing
ACDC-48V-120W-JB AC to 24v 2,5A 120W Adaptator for sw itch, w orking temperature 0 to +50°C, blocking jack for Rail-DIN sw itch or FOC-H, plastic box
ACDC-I-48V-120W-DM AC to DC48V 2,5A 120W adaptater for sw itch and media converter, tpure -10 to +60°C, terminal block, DIN-Rail metal box
ACDC-H-48V-240W-DM AC to DC48V 5A 240W adaptater for sw itch and media converter, tpure -25 to 65°C and 75% at 70°C, terminal block, DIN-Rail metal box
ACDC-H-48V-480W-DM AC to DC48V 10A 480W adaptater for sw itch and media converter, tpure -25 to 65°C and 75% at 70°C, terminal block, DIN-Rail metal box
DCDC-I-12-48V-84W-DM DC-DC converter 12V to 48V 1,78A 85W Adapter, tpure -10 à +60°C, terminal block, DIN rail metal box
DCDC-24-48-200W-DM DC-DC converter 24V to 48V 200W, galvanic isolation w fan.

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-16-
 Distribution of Ethernet POE

One box injects POE power over

Ethernet POE injector and splitter Ethernet line and another box extracts
power to supply local equipments.
Ethernet Ethernet POE Ethernet POE-100SE
Power Sourcing box powered by AC
DC 48v adapter injects POE 48V &15,4W.
POE-100SE POE-100PD-xV 5, 9 or 12V POE-100PD-xV
AC
equipment Splitter 5, 9 or 12Vcc from POE Ethernet
to supply local Non POE device.
Bridge/xDSL modem is extending LAN
Ethernet POE extension over xDSL and provides POE Ethernet for IP-
camera, IP-phone, hot-spot….
GSHDSL-Bis 11,7Mbps
3 Ethernet CopperLAN-Bis-POE
Bridge/G.SHDSL-Bis 2/4 wire modem at
CopperLAN-Bis 2 to 11 km 0,2 to 15Mbps up to 11km
Ethernet POE 4 x 10/100BaseT w 1 POE, VLAN, QoS...
CopperLAN-Bis-POE VDD-H-TPW
Ethernet bridge/VDSL2 modem 2 wires,
DC 48v VDSL 20 to 100Mbps from 1000 to 300m 4 Ethernet POE up to 100Mbps, and up to 1.7km. POL the
distant over the DSL line.
VDD-H-TPOE
POL power feeding of the distant Ethernet bridge/VDSL2 modem, remote
VDD2-H-TPOE feed by the line, support 4 POE ports.
VDD2-H-TPW
Media converter from fiber Ethernet to
copper FE or GE POE Ethernet
FE or GE POE extention over fiber FX or GSX/GLX FOCD-I-TPS-SFP or FOCD-I-GPS-SFP
FX converts to 10/100BaseT or GSX/GLX
Ethernet POE to 10/100/1000BaseT with POE PsE 30W
100FX MM or SM to feed local equipment.
FOCD-I-TPS-FX
DC 48v AC
DIN-Rail industrial/hardened switches
with dual 48Vcc power supply. Sup-
Unmanageable POE Switches, industrial DIN rail ports 4kV electric shock...
SWD-I-4TPS4TX / -4TPS3TX-FX..
Industrial -10 to +60°C Hardened -40 to +75°C 4 FE with 4 POE 15,4W, 4 FE non POE,
0 or 1 100FX MM or SM, -10°C to + 60°C
4 FE POE
SWD-H-4TPS4TX / -4TPS3TX-FX.. 4
FE with 4 POE 15,4W, 4 FE non POE,
SWD-I-4TPS-4TX 0 or 1 100FX MM or SM, -40°C to + 75°C
4 GE POE SWDL-I-4GPS-GSF
SWDL-I-4GPS-GSF SWD-H-4TPS-4TX 4x10/100/1000BaseT POE ports 30W,
1 GSX/GLX SFP, -10°C to + 60°C

Layer 2 manageable POE Industrial Switches Supports 802.1x, VLAN 802.1q, QoS
802.1p, RSTP, MSTP, Alpha-Ring <15ms,
Truncking, IGMP...from -40°C + 75°C
Complies to IEC61000-6-2 for
SWMD-H-8TPS w 0,1 or 2 GE/GX
- ITS Transport SWMD-H-8TPS-2GE DIN case, 8 x10/100BaseT POE 15,4W,
- Intelligent-building 0 to 2 x 1000BaseT/SX/LX
- Security control SWM-H-16TPS w 0,1 or 2 GE/GX
- Factories 19’’ case ,16 x10/100BaseT POE 15,4W,
1 or 2 x 1000BaseT/SX/LX
SWM-H-16TPS-2GE
Supports 802.1x, VLAN 802.1q, Q-in-Q,
SWM-H-24TPS-2GPS-2GSX
QoS 802.1p, RSTP, MSTP, ESR-Ring
<50ms, Truncking, IGMP...
SWM-8TPS-2UCB-AC ou DC
Layer 2 & 3 POE Switches for Telco and Industries 8 FE POE at 15,4W or 4 at 30W,
2 universal combo ports
SWM-24TPS-2UCB SWM-24TX-2UCB-AC ou DC
SWM-8TPS-2UCB 24 FE POE 15,4W or 12 at 30W,
2 universal combo ports
SWM-24GPS-4GSF-AC ou DC
SW3G-20TGPS-4UCB
Industrial -10 to +60°C 24 GE POE 30W, 4 GSX/GLX SFP

Smart Solutions for Smart Networks—www.cxr.com

-17-
 DIN-rail Industrial and Hardened
Unmanaged Ethernet POE switches

SWD-I-4TPS-4TX or
FOCI-I-GPS-GSF
SWD-H-4TPS-4TX .

SWDL-I-4GPS-GSF

SWD-I-4TPS-4TX SWD-H-4TPS-4TX
MODELS FOCD-I-GPS-GSF SWDL-I-4GPS-GSF
SWD-I-4TPS-3TX-F SWD-H-4TPS-3TX-F
MANAGEMENT AUTOMATIC
Environnemental
Port capacity 8 FE 8 FE 2 GE 5 GE
Industrial -20 at 60°C
√ √ √
Factory test -20 at 70°C
Hardened -40 at 75°C
√
Factory test -40 at 85°C
Industrial compliance IEC61000-6-2 Industrial generic, CE, FCC, UL608, NEMA TS1 & TS2
E-MARK for coach/bus YES YES
Ethernet ports
Copper UTP 4 or 3 x 10/100BaseT 4 or 3 x 10/100BaseT 1 x 10/100/1000BaseT 4 x 10/100/1000BaseT
POE PsE 802.3af (15,4W) 4 4
POE PsE 802.3at (30W) 1 4
Optical ports 0 or 1 fixed 100FX 0 or 1 fixed 100FX 1 1000GSX/GLX SFP 1 1000GSX/GLX SFP
Alarm relay Yes set up per port or power supply
Physical / Electrical
IP30 aluminium IP30 aluminium IP30 plastic IP30 plastic
Casing Rail-DIN Rail-DIN Rail-DIN, Wall mounting Rail-DIN, Wall mounting
Fanless Fanless Fanless Fanless

Dimensions W x D x H mm 62 x 110 x 135 60 x 125 x 145 35 x 93 x 105 61 x 93 x 105

Power supply 2 x 48Vcc 2 x 48Vcc 2 x 48Vcc 2 x 48Vcc

2 are redundant jack 48Vcc jack 48Vcc jack 48Vcc jack 48Vcc
Consumpsion
/ 72 W / 72 W 4,2 W / 130 W 4,2 W / 130 W
w:o POE / w POE
Performances
MAC address table sizes 1024 1024 1024 2048
Packet buffer memory (Bits) 1M 1M 48K 128K

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-18-
 Industrial and Hardened Layer 2
managed Ethernet POE switches

SWM-H-24TPS-2GPS-2GX-I-4GPS-GSF

SWM-H-8TPS-1G..
SWMD-H-8TPS-G.. SWM-H-24TPS
MODELS SWM-H-8TPS-2G..
SWMD-H-8TPS-2G.. -2GPS-2GX/GSX
SWM-H-16TPS-2G..
MANAGEMENT LAYER 2 MANAGED
Environnemental
Port capacity 8 FE + 2 FE + 2 GE 16 FE + 2 GE 24FE + 4 GE
Hardened -40 at 75°C
√ √ √
Factory test -40 at 85°C
Industrial compliance
Ethernet ports
Copper 10/100BaseT
10/100BaseT POE PsE 802.3af 8 at 15,4W or 8 or 16 at 15,4W 24 FE +2 GE
10/100BaseT POE PsE 802.3at 4 at 15,4W and 4 at 30W 12 FE + 2GE
Optical ports 100FX 2 SFP - -
Uplink 10/100/1000BaseT 0 or 2 0 or 2 0 or 2
Uplink 1000FX 0 or 2 0 or 2 0 or 2
Optic fixed or SFP fixed or SFP Fixed
Physical / Electrical
IP30 metal, Rail-DIN IP30 metal, 19" 1U IP30 metal, 19" 1U
Casing
Fanless Fanless Fan
Dimensions W x D x H mm 65 x 145 x 165 442 x 205 x 44 442 x 343 x 44 mm
Power supply 2 x 48Vcc 1 ou 2
47 at 55 Vdc
2 are redundant jack 48Vcc 47 à 55 Vdc
Consumption 15W / 132,3W 8 ports .3af
12W / 247W 16p. 3af 30 / 420W
w:o POE / w POE /210W 4p.3af + 4p. 2at
Performances
MAC address table size 8192 8192 8192
Packet buffer memory (Bits) 2M 2M 2M
Network Redundancy
STP/RSTP YES YES YES
MSTP YES YES YES
Alpha Ring < 15ms YES YES YES
Management and network protocols
VLAN Port VLAN,tagging 802.1q C-VLAN, GVRP
QoS 802.1p 802.1p with 4 priority queues
IGMP Multicast with IGMP Snooping V1,V2 et V3
Access security 802.1x per port with Radius client
24 MAC address set up per port
802.3x
Flow control
Rate access limiting Ingress/Egress per ports per 62kbps step
Other protocols Truncking/MAC address, Port Mirroring, NTP client and relay
Ethernet 10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex,
Auto-negociation,
Console port,MDI/MDIX, Wire-Speed
Telnet, SNMP tranfert ,
V3, RMON,
Management
Web browser, TFTP and CLI

Smart Solutions for Smart Networks—www.cxr.com

-19-
 ‘’Carrier Ethernet’ POE switches
Layer 2 & 3 manageable

MODELS SWM-8TPS-2UCB-S22 SWM-24TPS-2UCB-S22 SWM-24GPS-4GSF-ACS48 SW3G-20TGPS-4UCB-AC

MANAGEMENT Layer 2 Layer 2 Layer 3
Environnements
Port capacity 8 FE + 2 GE 24FE + 2 GE 24 GE + 4 GX 24 GE + 4 10GE
Working temperature -10° to -60°C -10° to -60°C -10° to -50°C -10° to -50°C
Industrial compliance CE, FCC
Ethernet ports
10/100BaseT POE PsE 802.3af 8 at 15,4W 24 at 15,4W
10/100BaseT POE PsE 802.3at 4 at 30W 12 at 30W
10/100/1000BaseT POE PsE 802.3af 24 at 15,4W 20 at 15,4W
10/100/1000BaseT POE PsE 802.3at 24 at 30W
2 universal combo ports 2 universal combo ports
4 universal combo ports 10/100/1000BaseT and
UPLINK 10/100/1000BaseT and 10/100/1000BaseT and 4 SFP 1000SX/LX/ZX
SFP 100FX or 1000SX/LX/ZX
SFP 100FX or 1000SX/LX/ZX SFP 100FX or 1000SX/LX/ZX
Optional 2 x 2 XFP 10GE modules
Physical / Electrical
metal metal metal metal
Casing 19" 1U 19" 1U 19" 1U 19" 1U
Fan Fan Fan Fan
Dimensions W x D x H mm 300 x 240 x 44 440 x 340 x 44 440 x 400 x 44
Power supply version -A-S22 : AC 176 at 264V Internal AC 176 at 264V 500W Internal AC 176 at 264V 500W
2 are redundant version -D-S22 : DC -36 at -72Vcc optionnal +500W AC power optionnal +500W AC power
Consumption
/ 124W / 400W /720W /420W
w:o POE / w POE
Performances
MAC address table sizes 8K 16K 16K
Packet buffer memory (Bits) 2M 2M 2M
Troughput/Switch fabric 42Mbps / 56Gbps
Network Redundancy
STP/RSTP YES YES YES
MSTP YES YES YES
Alpha Ring < 15ms ESR Ring <50ms R-Ring <50ms R-Ring <50ms
Management and network protocols
Static routing, VLAN routing,
Routing - Static routing, VLAN routing
RIP 1&2, OSPF v2, BGP v4
Port VLAN,tagging 802.1q C-VLAN, S-VLAN, GVRP, VLAN VLAN per port and tagging 802.1q , S- VLAN per port and tagging 802.1q , S-VLAN/C-
VLAN
protection 1:1 and 1:n VLAN/C-VLAN Q-in-Q and GVRP VLAN Q-in-Q and GVRP
Port and tag 802.1p, IPV4 ToS/DiffServ, Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6
QoS 802.1p 802.1p with 4 priority queues
IPV6 Traffic Class, 8 priority queues Traffic Class, 8 priority queues
Multicast IGMP Snooping V1,V2 and V3, Multicast IGMP Snooping V1,V2 and V3, Inter-
IGMP Multicast with IGMP Snooping V1,V2 et V3
Proxy IGMP and IGMP fast leave VLAN multicast duplication, PIM-SM
802.1x per port with Radius client 802.1x per port with Radius Client, ACL … 802.1x per port with Radius Client, ACL … see
Access security
20 MAC address set up see datasheet datasheet
Flow control 802.3x
Rate access limiting Ingress/Egress per ports by 62kbps step
Truncking/MAC address, Port Mirroring 1:1 and 1:n, SNTP DHCP server/relay and option 82, LACP DHCP server/relay and option 82, LACP
Other protocols
client and relay truncking, NTP client and relay… truncking, NTP client and relay…
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, 10/100Mbps Full/Half Duplex, 1000Mbps Full 10/100Mbps Full/Half Duplex, 1000Mbps Full
Ethernet
Auto-negociation, MDI/MDIX, Wire-Speed tranfert , Duplex, Auto-negociation, MDI/MDIX Duplex, Auto-negociation, MDI/MDIX
Over console port or LAN or WAN with Over console port or LAN or WAN with
Console port, Telnet/SSH, SNMP V3, RMON,
Management Telnet/SSH, SNMP V1/V2/V3, RMON, Web Telnet/SSH, SNMP V1/V2/V3, RMON, Web
Web browser, TFTP and CLI
browser*, TFTP and CLI browser*, TFTP and CLI
MEF 9, MEF 14, OAM Ethernet , 802.3ah, Y.1731,
MEF and cross-administration
IEEE802.1ag

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-20-
 Ethernet /Gigabit Ethernet/10 Gigabit
Media conversion copper/fiber/fiber
CXR manudfactures a large range of fiber optic converters, multiplexers… particularly for TDM, analogue, legacy
and Ethernet/Gigabit/10Gigabit media converters from “Copper to Fiber” or “Fiber to Fiber” as pure converter
or with switching for rate adaptation. They are used as interfaces adaptation, modem over fiber, fiber booster
or transponder from standard wavelength to CWDM or DWDM. We supply Media Converters:
 Automatic or Web/SNMP managed converters and chassis of conversion
 Transparent to 9K Jumbo Frame or with VLAN/Q-in-Q tagging
 Link alarm in case UTP or fiber is coming down
 Standard, Industrial and hardened
 Fixed or SFP fiber transceivers MM, SM up to 200km, CWDM and DWDM

- COPPER to FIBER -
Media and rate conversions
FOC-TTX-FX
Automatic converter,
10/100Baset to 100FX or 100Bt/100FX
FOC-TGTX-GSX/GLX or SFP
Automatic converter,
10/100/1000Baset to 1000SL/LX/ZX
LAN extension over fiber optic Fixed Fiber MM, SM to 100km or
SFP simple, WDM, CWDM, DWDM
FOC-2x10G-SFPP
Automatic converter,
Ethernet Copper 10G to 10G with 2 SFP+
10BaseT
FOCM-TTX-FX or SFP
Web/SNMP manageable converter
100BaseT Gigabit Ethernet transport network- Q-in-Q and Ethernet demarcation, OAM 10/100Baset to 100FX or 100Bt/100FX
1000Baset FOCM-TGTX-GSX/GLX or SFP
10G UTP Web/SNMP manageable converter
10/100/1000Baset to 1000SL/LX/ZX
Ethernet Fiber VLAN & Q-in-Q tagging, filter, rate lim-
10FL iting, RMON
100FX RACK-MEDIA16
Chassis for 16 FOC, FOCFF,FOCM.
1000SX/LX/ZX
Booster, CWDM/DWDM transponder for Ethernet fiber
10G-SR/LR/ER/ZR - FIBER to FIBER -
FOCFF-USFP-USFP
2 fibers Automatic converter dual SFP,
WDM 100FX to 100FX and 1000FX to 1000FX
CWDM FOS-25G-SFP-SFP
DWDM 3R optic conversion from 10Mbps to
2,5Gbps, dual SFP, conversion, booster,
Fiber
100FX 100FX transponder for CWDM/DWDM.
Fiber
2 cores, WDM 1000SX/LX/ZX 1000SX/LX/ZX 2 cores, WDM
CWDM, DWDM STM1/4/16 STM1/4/16 CWDM, DWDM - INDUSTRIAL/HARDENED -
FOCD-I-TTX-FX
Industrial/Hardened media converters standard or with POE PSE FOCD-I-TGX-SX/LX
Din-rail Industrial converter
-10 to +60°C
Ethernet POE FOCD-I-TPS-FX
100FX MM or SM FOCD-I-TPG-SX/LX
1000SX/LX FOCD-I-TPS/TGPS- Din-rail Industrial converter
DC 48v AC POE source 802.3at 30W
FOCD-H-TTX-FX
FOCD-H-TGX-SX/LX
Din-rail Hardened converter
-40 to +75°C
AMS-MEDIA16-SNMP
Web/Telnet/SNMP Chassis for
16 FOCIR card
FOCIR-TTX-FX
FOCIR-TGTX-GSX/GLX
Converter cards,
10/100Baset to 100FX or
10/100/1000Baset to 1000SL/LX/ZX
MM, SM to 100km, WDM, CWDM

Smart Solutions for Smart Networks—www.cxr.com

 Carrier Transport Ethernet Network
EoPDH - EoSDH/Sonet - EFM-Gshdsl - HVLAN - EDD
CXR supplies solutions for Carrier Ethernet Network and services. These run over multiple infrastructures: PDH,
SDH, copper DSL, fiber or Ethernet backhaul. These solutions are used by Telco in low density area with mix
accesses or by Utilities, Transportation or Defense infrastructures to develop implement networks.
The deployment of Q-in-Q is provided by commissioning EDGE devices. The Hierarchical-VLAN is federating
bandwidth of central backbone with low administration costs.
CXR launch a new range of switches with Ethernet Demarcation Device (EDD) function. This Edge equipments support
SyncE and PTP 1588v2 slave which give to EDD a high level of precision to synchronize the clock and phase of
connected CESoPSN equipment, IP-BTS 3.5G or 4G/LTE.

EoPDH

EoSDH/EoSonet

Carrier Ethernet / EDD

CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France

Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: contact@cxr.com
-22-
E1/T1, E3/DS3, STM1/STM4 Pseudo-Wire
Transmission encapsulated over IP/Ethernet
CXR supplies solutions to interconnect PDH and SDH nodes over Ethernet backhaul with synchronization of distant
isolated devices. These solutions carry over New Generation Packet Network synchronous TDM applications and low
latency with high reliability structures which are used in Utilities, Transportation or Defense areas.
Based on SAToP, CESoPSN/E, TDM over IP protocols according to RFCs CXR offer a large range of devices from small
CPEs to large concentration systems or integrated cards in PDH/SDH multiplexer compatible with other vendor.
We carry in Pseudo-Wire over Ethernet/IP unframed/framed E1/T1 for voice E1-CAS, E1-R1, ISDN E1/T1 PRI, for
2G/3G+ E1 A-Bis, A-Ter, E1/T1 ATM, E3, DS3 and SDH STM1 or STM4.
We provide Point to Point or Multipoint transport and save additional cross connect or SDH multiplexers.

Extension of TDM, interconnexion of PDH Networks over IP/Ethernet

Extension of SDH and E1/T1 Network over NG Packet Network

Extension of unstructured data over IP/Ethernet

Smart Solutions for Smart Networks—www.cxr.com