Flatpack2 | Integrated

Modular Power Supply Unit – 5U (150A) to 8U (600A)

Product Description Key Features

The Flatpack2 Integrated has been specifically designed ü Highest efficiency in minimum space
to meet the demand for higher density and more
Resonant topology makes the module efficiency industry
compact power solutions. It is suitable for applications
needing an expandable, easily serviceable and reliable leading and contributes to the rectifier’s ultra compact
power supply, fitting within a minimal space. dimensions.

The Flatpack2 Integrated is a compact power system ü Digital controllers

containing a Monitoring and Control Unit (Smartpack),
Primary and secondary controls are digitalized, enabling
LVD, battery and load MCBs. It contains of a 4U
excellent monitoring and regulation characteristics.
distribution unit and 1 to 4U of PR (power rack) witch
can house 4 Flatpack2 rectifier modules each. Switch Thus, the number of component has been reduced by
mode technology with resonant topology and high 40% - for highly reliable, long life, trouble free DC
switching frequency is used to minimize volume and power systems.
weight and to obtain high reliability. The system accepts
large variations on the input voltage (85-290 VAC) and ü Heat management
draws sinusoidal current with a soft start power-up. Front-to-back air flow with chassis-integrated heat sinks
gives the module the most suitable working
Applications
environment and no limitations in the scalability of the
Wireless, fiber and fixed line communication desired system solution.
Today’s communications demand state of the art, cost
efficient and compact DC power systems. Flatpack2 ü Unique connection
delivers the industry leading power density of 21W/in3 A true plug-and-play connection system: time-to-install
and superb reliability at lowest lifetime cost.
and cost-reducing solution.
Broadband and network access
Increasing network speed demands flexible and ü Global approvals
expandable DC power solutions. Flatpack2 is your key Flatpack2 is CE marked, UL recognized and NEBS
building block for future needs. certified for world wide installation.

Flatpack2 7U Integrated (450A) System

www.eltekenergy.com
 Flatpack2 | Integrated
Additional Technical Specifications

Maximum number of rectifiers – 4 to 16

AC Input DC Distribution Options

1 phase 230 VAC No. of Load 18 x (2-63A)
Voltage 3 phase 230 VAC ( Δ ) breakers 9 x (2-63A) + 6 x (80-125A)
3 phase 400 VAC+N ( Y )
No. of Battery 6 (max. 100A each)
Frequency 45 to 66Hz
fuses 3 (max. 200A each)
Maximum Current See Flatpack2 48VDC datasheet 2 (max. 250A each)

Protection Soft start Programmable 1 LVBD (150, 300, 500 or 600A)

Surge protection (varistors) LVD 1 LVLD (150, 300, 500 or 600A)
Internal fuses (L & N)
Disconnect above 290 VAC Connections
Battery connections Battery cable, M8 bolts
Monitoring Load MCB Negative distribution directly from CBs.
Monitoring unit See Smartpack datasheet connections Common positive bus bars
Alarm connections Plug-in wire connectors front or rear
Local operation Menu driven software via
access
keypads and LCD or PC (PowerSuite)
Remote operation PowerSuite via modem or Monitoring
via WebPower (WEB Interface and Other Specifications
SNMP protocol) 3.0 KVAC – input and output
Isolation 1.5 KVAC – input earth
Alarm outputs 6 relays
0.5 KVDC – output earth
Visual indications Green LED – System ON
Yellow LED – Minor alarm(s) Operating temp. -40 to +60°C (-40 to +140°F)
Red LED – Major alarm(s)
Storage temp. -40 to +85°C (-40 to +185°F)
LCD – system status
Digital inputs 6 (for monitoring of external Dimensions 482 x 380 x 267mm (6U) (wxdxh) (19
equipment) x 14.9 x 10.5’’) recommended cabinet
Current Battery current depth is min 400 mm (15.7”)
measurements Rectifier current
Weight Approx. 5kg (11lbs) excl. rectifiers
Alarms Load fuse alarm
Battery fuse alarm
LVD operated Applicable Standards
Low output voltage alarms IEC 60950
(2 individual alarm levels) Electrical safety UL 60950
High output voltage alarms
(2 individual alarm levels) EMC ETSI EN 300 386 V.1.3.1
Battery capacity (telecommunication network)
Temperature alarm EN 61000-6-3
Symmetry alarm (emission, light industry)
EN 61000-6-2
DC Output (immunity, industry)
Voltage 48 VDC
Environment ETSI EN 300 019-2
Current 5U Max. 150A ETSI EN 300 132-2
6U Max. 300A
7U Max. 450A
8U Max. 600A
Specifications are subject to change without notice.

ORDERING INFORMATION

Part no. Description

241115.001 Flatpack2 48V Rectifier Module
M20405.000 Flatpack2 5U Integrated – 19” 3ph Y 7,2kW 2x200A Battery Breakers, 150A LVBD, 6 I/O, 1.5m TP
M20806.000 Flatpack2 6U Integrated – 19” 3ph Y 14kW 3x200A Battery Breakers, 300A LVBD, 150A LVLD, 6 I/O, 1.5m TP
M21207.000 Flatpack2 7U Integrated – 19” 3ph Y 22kW 3x200A Battery Breakers, 500A LVBD, 300A LVLD, 6 I/O, 1.5m TP
900240-xxxxx Flatpack2 Integrated – Sales configured system (CTO)

Document Rev. No.: 200000.DS3 v.03

Location Company Telephone Fax

Europe Eltek Energy AS +47 32 20 32 00 +47 32 20 32 10
Americas Eltek Energy, LLC +1 815 459 9100 +1 815 459 9118
Asia/Pacific Eltek Energy Pte Ltd. +65 6 7732326 +65 6 7753602
China Eltek Energy Ltd. +86 769226 51108 +86 76922296797
Middle East Eltek Middle East +971 4 887 1176 +971 4 887 1175