Experion PKS

Control Builder Error Code Reference

EPDOC-XX17-en-430A
December 2013

Release 430
 Document Release Issue Date
EPDOC-XX17-en-430A 430 1.0 December 2013

Disclaimer
This document contains Honeywell proprietary information. Information contained herein is to be used solely
for the purpose submitted, and no part of this document or its contents shall be reproduced, published, or
disclosed to a third party without the express permission of Honeywell International Sàrl.
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied
warranties of merchantability and fitness for a purpose and makes no express warranties except as may be stated
in its written agreement with and for its customer.
In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The information
and specifications in this document are subject to change without notice.
Copyright 2013 - Honeywell International Sàrl

2 www.honeywell.com
Contents

1 About This Document .......................................................................................................................... 83

2 Introduction .......................................................................................................................................... 85
2.1 Scope ................................................................................................................................................................. 86
3 Error Codes ........................................................................................................................................... 87
3.1 AGA Error Codes ............................................................................................................................................. 88
3.1.1 AGA Error Codes .............................................................................................................................. 88
3.2 Codes 03A5 and 03A6 ...................................................................................................................................... 93
3.2.1 03A5 .................................................................................................................................................. 93
3.2.2 03A6 .................................................................................................................................................. 93
3.3 Codes 1 to 22 .................................................................................................................................................... 94
3.3.1 1 ......................................................................................................................................................... 94
3.3.2 2 ......................................................................................................................................................... 94
3.3.3 3 ......................................................................................................................................................... 95
3.3.4 4 ......................................................................................................................................................... 95
3.3.5 5 ......................................................................................................................................................... 95
3.3.6 6 ......................................................................................................................................................... 96
3.3.7 7 ......................................................................................................................................................... 96
3.3.8 8 ......................................................................................................................................................... 96
3.3.9 9 ......................................................................................................................................................... 97
3.3.10 10 ..................................................................................................................................................... 97
3.3.11 11 ...................................................................................................................................................... 97
3.3.12 12 ..................................................................................................................................................... 98
3.3.13 13 ..................................................................................................................................................... 98
3.3.14 14 ..................................................................................................................................................... 98
3.3.15 15 ..................................................................................................................................................... 99
3.3.16 16 ..................................................................................................................................................... 99
3.3.17 17 ..................................................................................................................................................... 99
3.3.18 18 ................................................................................................................................................... 100
3.3.19 19 ................................................................................................................................................... 100
3.3.20 20 ................................................................................................................................................... 100
3.3.21 21 ................................................................................................................................................... 101
3.3.22 22 ................................................................................................................................................... 101
3.4 Codes 1001 to 1077 ........................................................................................................................................ 102
3.4.1 1001 ................................................................................................................................................. 103
3.4.2 1002 ................................................................................................................................................. 103
3.4.3 1003 ................................................................................................................................................. 104
3.4.4 1004 ................................................................................................................................................. 104
3.4.5 1005 ................................................................................................................................................. 104
3.4.6 1006 ................................................................................................................................................. 105
3.4.7 1007 ................................................................................................................................................. 105
3.4.8 1008 ................................................................................................................................................. 105
3.4.9 1009 ................................................................................................................................................. 106
3.4.10 1010 ............................................................................................................................................... 106
3.4.11 1011 ................................................................................................................................................ 106
3.4.12 1012 ............................................................................................................................................... 107

3
CONTENTS

3.4.13 1013 ............................................................................................................................................... 107

3.4.14 1014 ............................................................................................................................................... 107
3.4.15 1015 ............................................................................................................................................... 108
3.4.16 1016 ............................................................................................................................................... 108
3.4.17 1017 ............................................................................................................................................... 108
3.4.18 1018 ............................................................................................................................................... 109
3.4.19 1019 ............................................................................................................................................... 109
3.4.20 1020 ............................................................................................................................................... 109
3.4.21 1021 ............................................................................................................................................... 110
3.4.22 1022 ............................................................................................................................................... 110
3.4.23 1027 ............................................................................................................................................... 110
3.4.24 1028 ................................................................................................................................................ 111
3.4.25 1029 ................................................................................................................................................ 111
3.4.26 1030 ................................................................................................................................................ 111
3.4.27 1031 ............................................................................................................................................... 112
3.4.28 1032 ............................................................................................................................................... 112
3.4.29 1033 ............................................................................................................................................... 112
3.4.30 1034 ............................................................................................................................................... 113
3.4.31 1035 ............................................................................................................................................... 113
3.4.32 1036 ............................................................................................................................................... 113
3.4.33 1037 ............................................................................................................................................... 114
3.4.34 1038 ............................................................................................................................................... 114
3.4.35 1039 ............................................................................................................................................... 114
3.4.36 1040 ............................................................................................................................................... 115
3.4.37 1041 ............................................................................................................................................... 115
3.4.38 1042 ............................................................................................................................................... 115
3.4.39 1044 ............................................................................................................................................... 116
3.4.40 1045 ............................................................................................................................................... 116
3.4.41 1046 ............................................................................................................................................... 116
3.4.42 1047 ............................................................................................................................................... 117
3.4.43 1048 ............................................................................................................................................... 117
3.4.44 1049 ............................................................................................................................................... 117
3.4.45 1050 ............................................................................................................................................... 118
3.4.46 1051 ............................................................................................................................................... 118
3.4.47 1052 ............................................................................................................................................... 118
3.4.48 1053 ............................................................................................................................................... 119
3.4.49 1054 ............................................................................................................................................... 119
3.4.50 1055 ............................................................................................................................................... 119
3.4.51 1056 ............................................................................................................................................... 120
3.4.52 1057 ............................................................................................................................................... 120
3.4.53 1058 ............................................................................................................................................... 120
3.4.54 1059 ............................................................................................................................................... 121
3.4.55 1060 ............................................................................................................................................... 121
3.4.56 1061 ............................................................................................................................................... 121
3.4.57 1062 ............................................................................................................................................... 122
3.4.58 1063 ............................................................................................................................................... 122
3.4.59 1064 ............................................................................................................................................... 122
3.4.60 1065 ............................................................................................................................................... 123
3.4.61 1066 ............................................................................................................................................... 123
3.4.62 1067 ............................................................................................................................................... 123
3.4.63 1068 ............................................................................................................................................... 124
3.4.64 1069 ............................................................................................................................................... 124
3.4.65 1070 ............................................................................................................................................... 124
3.4.66 1071 ............................................................................................................................................... 125

4 www.honeywell.com
 CONTENTS

3.4.67 1072 ............................................................................................................................................... 125

3.4.68 1073 ............................................................................................................................................... 125
3.4.69 1074 ............................................................................................................................................... 126
3.4.70 1075 ............................................................................................................................................... 126
3.4.71 1076 ............................................................................................................................................... 126
3.5 Codes 2001 to 2099 ........................................................................................................................................ 128
3.5.1 2001 ................................................................................................................................................. 130
3.5.2 2002 ................................................................................................................................................. 130
3.5.3 2003 ................................................................................................................................................. 130
3.5.4 2004 ................................................................................................................................................. 131
3.5.5 2005 ................................................................................................................................................. 131
3.5.6 2006 ................................................................................................................................................. 131
3.5.7 2007 ................................................................................................................................................. 132
3.5.8 2008 ................................................................................................................................................. 132
3.5.9 2009 ................................................................................................................................................. 133
3.5.10 2010 ............................................................................................................................................... 133
3.5.11 2011 ................................................................................................................................................ 134
3.5.12 2012 ............................................................................................................................................... 134
3.5.13 2013 ............................................................................................................................................... 134
3.5.14 2014 ............................................................................................................................................... 135
3.5.15 2015 ............................................................................................................................................... 135
3.5.16 2016 ............................................................................................................................................... 135
3.5.17 2017 ............................................................................................................................................... 136
3.5.18 2018 ............................................................................................................................................... 136
3.5.19 2019 ............................................................................................................................................... 137
3.5.20 2020 ............................................................................................................................................... 137
3.5.21 2021 ............................................................................................................................................... 137
3.5.22 2022 ............................................................................................................................................... 138
3.5.23 2023 ............................................................................................................................................... 138
3.5.24 2024 ............................................................................................................................................... 138
3.5.25 2025 ............................................................................................................................................... 139
3.5.26 2026 ............................................................................................................................................... 139
3.5.27 2027 ............................................................................................................................................... 140
3.5.28 2028 ............................................................................................................................................... 140
3.5.29 2029 ............................................................................................................................................... 140
3.5.30 2030 ............................................................................................................................................... 141
3.5.31 2031 ............................................................................................................................................... 141
3.5.32 2032 ............................................................................................................................................... 141
3.5.33 2033 ............................................................................................................................................... 142
3.5.34 2034 ............................................................................................................................................... 142
3.5.35 2035 ............................................................................................................................................... 142
3.5.36 2036 ............................................................................................................................................... 143
3.5.37 2037 ............................................................................................................................................... 143
3.5.38 2038 ............................................................................................................................................... 143
3.5.39 2039 ............................................................................................................................................... 144
3.5.40 2040 ............................................................................................................................................... 144
3.5.41 2041 ............................................................................................................................................... 144
3.5.42 2042 ............................................................................................................................................... 145
3.5.43 2043 ............................................................................................................................................... 145
3.5.44 2044 ............................................................................................................................................... 145
3.5.45 2045 ............................................................................................................................................... 146
3.5.46 2046 ............................................................................................................................................... 146
3.5.47 2047 ............................................................................................................................................... 146
3.5.48 2048 ............................................................................................................................................... 147

5
CONTENTS

3.5.49 2049 ............................................................................................................................................... 147

3.5.50 2050 ............................................................................................................................................... 148
3.5.51 2051 ............................................................................................................................................... 148
3.5.52 2052 ............................................................................................................................................... 149
3.5.53 2053 ............................................................................................................................................... 149
3.5.54 2054 ............................................................................................................................................... 149
3.5.55 2055 ............................................................................................................................................... 150
3.5.56 2056 ............................................................................................................................................... 150
3.5.57 2057 ............................................................................................................................................... 150
3.5.58 2058 ............................................................................................................................................... 151
3.5.59 2059 ............................................................................................................................................... 151
3.5.60 2060 ............................................................................................................................................... 151
3.5.61 2061 ............................................................................................................................................... 152
3.5.62 2062 ............................................................................................................................................... 152
3.5.63 2063 ............................................................................................................................................... 152
3.5.64 2064 ............................................................................................................................................... 153
3.5.65 2065 ............................................................................................................................................... 153
3.5.66 2066 ............................................................................................................................................... 153
3.5.67 2067 ............................................................................................................................................... 154
3.5.68 2068 ............................................................................................................................................... 154
3.5.69 2069 ............................................................................................................................................... 154
3.5.70 2070 ............................................................................................................................................... 155
3.5.71 2071 ............................................................................................................................................... 155
3.5.72 2072 ............................................................................................................................................... 155
3.5.73 2073 ............................................................................................................................................... 156
3.5.74 2074 ............................................................................................................................................... 156
3.5.75 2075 ............................................................................................................................................... 157
3.5.76 2076 ............................................................................................................................................... 157
3.5.77 2077 ............................................................................................................................................... 157
3.5.78 2078 ............................................................................................................................................... 158
3.5.79 2079 ............................................................................................................................................... 158
3.5.80 2080 ............................................................................................................................................... 158
3.5.81 2081 ............................................................................................................................................... 159
3.5.82 2082 ............................................................................................................................................... 159
3.5.83 2083 ............................................................................................................................................... 159
3.5.84 2084 ............................................................................................................................................... 160
3.5.85 2085 ............................................................................................................................................... 160
3.5.86 2086 ............................................................................................................................................... 160
3.5.87 2087 ............................................................................................................................................... 161
3.5.88 2088 ............................................................................................................................................... 161
3.5.89 2089 ............................................................................................................................................... 161
3.5.90 2090 ............................................................................................................................................... 162
3.5.91 2091 ............................................................................................................................................... 162
3.5.92 2092 ............................................................................................................................................... 163
3.5.93 2093 ............................................................................................................................................... 163
3.5.94 2094 ............................................................................................................................................... 163
3.5.95 2095 ............................................................................................................................................... 164
3.5.96 2096 ............................................................................................................................................... 164
3.5.97 2097 ............................................................................................................................................... 164
3.5.98 2098 ............................................................................................................................................... 165
3.5.99 2099 ............................................................................................................................................... 165
3.6 Codes 2100 to 2199 ........................................................................................................................................ 166
3.6.1 2100 ................................................................................................................................................. 168
3.6.2 2101 ................................................................................................................................................. 168

6 www.honeywell.com
 CONTENTS

3.6.3 2102 ................................................................................................................................................. 168

3.6.4 2103 ................................................................................................................................................. 169
3.6.5 2104 ................................................................................................................................................. 169
3.6.6 2105 ................................................................................................................................................. 169
3.6.7 2106 ................................................................................................................................................. 170
3.6.8 2107 ................................................................................................................................................. 170
3.6.9 2108 ................................................................................................................................................. 170
3.6.10 2109 ............................................................................................................................................... 171
3.6.11 2110 ................................................................................................................................................ 171
3.6.12 2111 ................................................................................................................................................ 172
3.6.13 2112 ............................................................................................................................................... 172
3.6.14 2113 ............................................................................................................................................... 172
3.6.15 2114 ............................................................................................................................................... 173
3.6.16 2115 ............................................................................................................................................... 173
3.6.17 2116 ............................................................................................................................................... 173
3.6.18 2117 ............................................................................................................................................... 174
3.6.19 2118 ............................................................................................................................................... 174
3.6.20 2119 ............................................................................................................................................... 174
3.6.21 2120 ............................................................................................................................................... 175
3.6.22 2121 ............................................................................................................................................... 175
3.6.23 2122 ............................................................................................................................................... 175
3.6.24 2123 ............................................................................................................................................... 176
3.6.25 2124 ............................................................................................................................................... 176
3.6.26 2125 ............................................................................................................................................... 177
3.6.27 2126 ............................................................................................................................................... 177
3.6.28 2127 ............................................................................................................................................... 177
3.6.29 2128 ............................................................................................................................................... 178
3.6.30 2129 ............................................................................................................................................... 178
3.6.31 2130 ............................................................................................................................................... 178
3.6.32 2131 ............................................................................................................................................... 179
3.6.33 2132 ............................................................................................................................................... 179
3.6.34 2133 ............................................................................................................................................... 179
3.6.35 2134 ............................................................................................................................................... 180
3.6.36 2135 ............................................................................................................................................... 180
3.6.37 2136 ............................................................................................................................................... 180
3.6.38 2137 ............................................................................................................................................... 181
3.6.39 2138 ............................................................................................................................................... 181
3.6.40 2139 ............................................................................................................................................... 181
3.6.41 2140 ............................................................................................................................................... 182
3.6.42 2141 ............................................................................................................................................... 182
3.6.43 2142 ............................................................................................................................................... 182
3.6.44 2143 ............................................................................................................................................... 183
3.6.45 2144 ............................................................................................................................................... 183
3.6.46 2145 ............................................................................................................................................... 184
3.6.47 2146 ............................................................................................................................................... 184
3.6.48 2147 ............................................................................................................................................... 184
3.6.49 2148 ............................................................................................................................................... 185
3.6.50 2149 ............................................................................................................................................... 185
3.6.51 2150 ............................................................................................................................................... 185
3.6.52 2151 ............................................................................................................................................... 186
3.6.53 2152 ............................................................................................................................................... 186
3.6.54 2153 ............................................................................................................................................... 186
3.6.55 2154 ............................................................................................................................................... 187
3.6.56 2155 ............................................................................................................................................... 187

7
CONTENTS

3.6.57 2156 ............................................................................................................................................... 187

3.6.58 2157 ............................................................................................................................................... 188
3.6.59 2158 ............................................................................................................................................... 188
3.6.60 2159 ............................................................................................................................................... 188
3.6.61 2160 ............................................................................................................................................... 189
3.6.62 2161 ............................................................................................................................................... 189
3.6.63 2162 ............................................................................................................................................... 190
3.6.64 2163 ............................................................................................................................................... 190
3.6.65 2164 ............................................................................................................................................... 190
3.6.66 2165 ............................................................................................................................................... 191
3.6.67 2166 ............................................................................................................................................... 191
3.6.68 2167 ............................................................................................................................................... 191
3.6.69 2168 ............................................................................................................................................... 192
3.6.70 2169 ............................................................................................................................................... 192
3.6.71 2170 ............................................................................................................................................... 192
3.6.72 2171 ............................................................................................................................................... 193
3.6.73 2172 ............................................................................................................................................... 193
3.6.74 2173 ............................................................................................................................................... 194
3.6.75 2174 ............................................................................................................................................... 194
3.6.76 2175 ............................................................................................................................................... 194
3.6.77 2176 ............................................................................................................................................... 195
3.6.78 2177 ............................................................................................................................................... 195
3.6.79 2178 ............................................................................................................................................... 195
3.6.80 2179 ............................................................................................................................................... 196
3.6.81 2180 ............................................................................................................................................... 196
3.6.82 2181 ............................................................................................................................................... 196
3.6.83 2182 ............................................................................................................................................... 197
3.6.84 2183 ............................................................................................................................................... 197
3.6.85 2184 ............................................................................................................................................... 197
3.6.86 2185 ............................................................................................................................................... 198
3.6.87 2186 ............................................................................................................................................... 198
3.6.88 2187 ............................................................................................................................................... 198
3.6.89 2188 ............................................................................................................................................... 199
3.6.90 2189 ............................................................................................................................................... 199
3.6.91 2190 ............................................................................................................................................... 199
3.6.92 2191 ............................................................................................................................................... 200
3.6.93 2194 ............................................................................................................................................... 200
3.6.94 2195 ............................................................................................................................................... 200
3.6.95 2196 ............................................................................................................................................... 201
3.6.96 2198 ............................................................................................................................................... 201
3.6.97 2199 ............................................................................................................................................... 202
3.7 Codes 2200 to 2299 ........................................................................................................................................ 203
3.7.1 2200 ................................................................................................................................................. 205
3.7.2 2201 ................................................................................................................................................. 205
3.7.3 2202 ................................................................................................................................................. 205
3.7.4 2203 ................................................................................................................................................. 206
3.7.5 2204 ................................................................................................................................................. 206
3.7.6 2205 ................................................................................................................................................. 206
3.7.7 2206 ................................................................................................................................................. 207
3.7.8 2207 ................................................................................................................................................. 207
3.7.9 2208 ................................................................................................................................................. 207
3.7.10 2209 ............................................................................................................................................... 208
3.7.11 2210 ............................................................................................................................................... 208
3.7.12 2211 ............................................................................................................................................... 209

8 www.honeywell.com
 CONTENTS

3.7.13 2212 ............................................................................................................................................... 209

3.7.14 2213 ............................................................................................................................................... 209
3.7.15 2214 ............................................................................................................................................... 210
3.7.16 2215 ............................................................................................................................................... 210
3.7.17 2216 ............................................................................................................................................... 210
3.7.18 2217 ............................................................................................................................................... 211
3.7.19 2218 ............................................................................................................................................... 211
3.7.20 2219 ............................................................................................................................................... 212
3.7.21 2220 ............................................................................................................................................... 212
3.7.22 2221 ............................................................................................................................................... 212
3.7.23 2222 ............................................................................................................................................... 213
3.7.24 2223 ............................................................................................................................................... 213
3.7.25 2224 ............................................................................................................................................... 213
3.7.26 2225 ............................................................................................................................................... 214
3.7.27 2226 ............................................................................................................................................... 214
3.7.28 2227 ............................................................................................................................................... 215
3.7.29 2228 ............................................................................................................................................... 215
3.7.30 2229 ............................................................................................................................................... 215
3.7.31 2230 ............................................................................................................................................... 216
3.7.32 2231 ............................................................................................................................................... 216
3.7.33 2232 ............................................................................................................................................... 216
3.7.34 2233 ............................................................................................................................................... 217
3.7.35 2234 ............................................................................................................................................... 217
3.7.36 2235 ............................................................................................................................................... 217
3.7.37 2236 ............................................................................................................................................... 218
3.7.38 2237 ............................................................................................................................................... 218
3.7.39 2238 ............................................................................................................................................... 219
3.7.40 2239 ............................................................................................................................................... 219
3.7.41 2240 ............................................................................................................................................... 219
3.7.42 2241 ............................................................................................................................................... 220
3.7.43 2242 ............................................................................................................................................... 220
3.7.44 2243 ............................................................................................................................................... 220
3.7.45 2244 ............................................................................................................................................... 221
3.7.46 2245 ............................................................................................................................................... 221
3.7.47 2246 ............................................................................................................................................... 222
3.7.48 2247 ............................................................................................................................................... 222
3.7.49 2248 ............................................................................................................................................... 222
3.7.50 2249 ............................................................................................................................................... 223
3.7.51 2250 ............................................................................................................................................... 223
3.7.52 2251 ............................................................................................................................................... 223
3.7.53 2252 ............................................................................................................................................... 224
3.7.54 2253 ............................................................................................................................................... 224
3.7.55 2254 ............................................................................................................................................... 224
3.7.56 2255 ............................................................................................................................................... 225
3.7.57 2256 ............................................................................................................................................... 225
3.7.58 2257 ............................................................................................................................................... 225
3.7.59 2258 ............................................................................................................................................... 226
3.7.60 2259 ............................................................................................................................................... 226
3.7.61 2260 ............................................................................................................................................... 226
3.7.62 2261 ............................................................................................................................................... 227
3.7.63 2262 ............................................................................................................................................... 227
3.7.64 2263 ............................................................................................................................................... 227
3.7.65 2264 ............................................................................................................................................... 228
3.7.66 2265 ............................................................................................................................................... 228

9
CONTENTS

3.7.67 2266 ............................................................................................................................................... 228

3.7.68 2267 ............................................................................................................................................... 229
3.7.69 2268 ............................................................................................................................................... 229
3.7.70 2269 ............................................................................................................................................... 229
3.7.71 2270 ............................................................................................................................................... 230
3.7.72 2271 ............................................................................................................................................... 230
3.7.73 2272 ............................................................................................................................................... 230
3.7.74 2273 ............................................................................................................................................... 231
3.7.75 2275 ............................................................................................................................................... 231
3.7.76 2276 ............................................................................................................................................... 231
3.7.77 2277 ............................................................................................................................................... 232
3.7.78 2278 ............................................................................................................................................... 232
3.7.79 2279 ............................................................................................................................................... 233
3.7.80 2280 ............................................................................................................................................... 233
3.7.81 2281 ............................................................................................................................................... 233
3.7.82 2282 ............................................................................................................................................... 234
3.7.83 2283 ............................................................................................................................................... 234
3.7.84 2284 ............................................................................................................................................... 234
3.7.85 2285 ............................................................................................................................................... 235
3.7.86 2286 ............................................................................................................................................... 235
3.7.87 2287 ............................................................................................................................................... 236
3.7.88 2288 ............................................................................................................................................... 236
3.7.89 2289 ............................................................................................................................................... 236
3.7.90 2290 ............................................................................................................................................... 237
3.7.91 2291 ............................................................................................................................................... 237
3.7.92 2292 ............................................................................................................................................... 237
3.7.93 2293 ............................................................................................................................................... 238
3.7.94 2294 ............................................................................................................................................... 238
3.7.95 2295 ............................................................................................................................................... 238
3.7.96 2296 ............................................................................................................................................... 239
3.7.97 2297 ............................................................................................................................................... 239
3.7.98 2298 ............................................................................................................................................... 239
3.7.99 2299 ............................................................................................................................................... 240
3.8 Codes 2300 to 2399 ........................................................................................................................................ 241
3.8.1 2300 ................................................................................................................................................. 243
3.8.2 2301 ................................................................................................................................................. 243
3.8.3 2302 ................................................................................................................................................. 243
3.8.4 2303 ................................................................................................................................................. 244
3.8.5 2304 ................................................................................................................................................. 244
3.8.6 2305 ................................................................................................................................................. 244
3.8.7 2306 ................................................................................................................................................. 245
3.8.8 2307 ................................................................................................................................................. 245
3.8.9 2308 ................................................................................................................................................. 245
3.8.10 2309 ............................................................................................................................................... 246
3.8.11 2310 ............................................................................................................................................... 246
3.8.12 2311 ............................................................................................................................................... 246
3.8.13 2312 ............................................................................................................................................... 247
3.8.14 2313 ............................................................................................................................................... 247
3.8.15 2314 ............................................................................................................................................... 247
3.8.16 2315 ............................................................................................................................................... 248
3.8.17 2316 ............................................................................................................................................... 248
3.8.18 2317 ............................................................................................................................................... 249
3.8.19 2318 ............................................................................................................................................... 249
3.8.20 2319 ............................................................................................................................................... 249

10 www.honeywell.com
 CONTENTS

3.8.21 2321 ............................................................................................................................................... 250

3.8.22 2322 ............................................................................................................................................... 250
3.8.23 2323 ............................................................................................................................................... 250
3.8.24 2324 ............................................................................................................................................... 251
3.8.25 2325 ............................................................................................................................................... 251
3.8.26 2326 ............................................................................................................................................... 251
3.8.27 2327 ............................................................................................................................................... 252
3.8.28 2328 ............................................................................................................................................... 252
3.8.29 2329 ............................................................................................................................................... 252
3.8.30 2330 ............................................................................................................................................... 253
3.8.31 2331 ............................................................................................................................................... 253
3.8.32 2332 ............................................................................................................................................... 253
3.8.33 2333 ............................................................................................................................................... 254
3.8.34 2334 ............................................................................................................................................... 254
3.8.35 2335 ............................................................................................................................................... 254
3.8.36 2336 ............................................................................................................................................... 255
3.8.37 2337 ............................................................................................................................................... 255
3.8.38 2338 ............................................................................................................................................... 255
3.8.39 2339 ............................................................................................................................................... 256
3.8.40 2340 ............................................................................................................................................... 256
3.8.41 2342 ............................................................................................................................................... 257
3.8.42 2343 ............................................................................................................................................... 257
3.8.43 2344 ............................................................................................................................................... 257
3.8.44 2345 ............................................................................................................................................... 258
3.8.45 2346 ............................................................................................................................................... 258
3.8.46 2347 ............................................................................................................................................... 258
3.8.47 2348 ............................................................................................................................................... 259
3.8.48 2349 ............................................................................................................................................... 259
3.8.49 2350 ............................................................................................................................................... 260
3.8.50 2351 ............................................................................................................................................... 260
3.8.51 2352 ............................................................................................................................................... 260
3.8.52 2353 ............................................................................................................................................... 261
3.8.53 2354 ............................................................................................................................................... 261
3.8.54 2355 ............................................................................................................................................... 261
3.8.55 2356 ............................................................................................................................................... 262
3.8.56 2357 ............................................................................................................................................... 262
3.8.57 2358 ............................................................................................................................................... 262
3.8.58 2359 ............................................................................................................................................... 263
3.8.59 2360 ............................................................................................................................................... 263
3.8.60 2361 ............................................................................................................................................... 263
3.8.61 2362 ............................................................................................................................................... 264
3.8.62 2363 ............................................................................................................................................... 264
3.8.63 2364 ............................................................................................................................................... 264
3.8.64 2365 ............................................................................................................................................... 265
3.8.65 2366 ............................................................................................................................................... 265
3.8.66 2367 ............................................................................................................................................... 265
3.8.67 2368 ............................................................................................................................................... 266
3.8.68 2369 ............................................................................................................................................... 266
3.8.69 2370 ............................................................................................................................................... 266
3.8.70 2371 ............................................................................................................................................... 267
3.8.71 2372 ............................................................................................................................................... 267
3.8.72 2373 ............................................................................................................................................... 267
3.8.73 2374 ............................................................................................................................................... 268
3.8.74 2375 ............................................................................................................................................... 268

11
CONTENTS

3.8.75 2376 ............................................................................................................................................... 268

3.8.76 2378 ............................................................................................................................................... 269
3.8.77 2379 ............................................................................................................................................... 269
3.8.78 2380 ............................................................................................................................................... 270
3.8.79 2381 ............................................................................................................................................... 270
3.8.80 2382 ............................................................................................................................................... 270
3.8.81 2383 ............................................................................................................................................... 271
3.8.82 2384 ............................................................................................................................................... 271
3.8.83 2385 ............................................................................................................................................... 272
3.8.84 2386 ............................................................................................................................................... 272
3.8.85 2387 ............................................................................................................................................... 272
3.8.86 2388 ............................................................................................................................................... 273
3.8.87 2389 ............................................................................................................................................... 273
3.8.88 2390 ............................................................................................................................................... 274
3.8.89 2391 ............................................................................................................................................... 274
3.8.90 2392 ............................................................................................................................................... 274
3.8.91 2393 ............................................................................................................................................... 275
3.8.92 2394 ............................................................................................................................................... 275
3.8.93 2395 ............................................................................................................................................... 276
3.8.94 2396 ............................................................................................................................................... 276
3.8.95 2397 ............................................................................................................................................... 277
3.8.96 2398 ............................................................................................................................................... 277
3.8.97 2399 ............................................................................................................................................... 277
3.9 Codes 2400 to 2601 ........................................................................................................................................ 279
3.9.1 2400 ................................................................................................................................................. 280
3.9.2 2401 ................................................................................................................................................. 280
3.9.3 2402 ................................................................................................................................................. 281
3.9.4 2403 ................................................................................................................................................. 281
3.9.5 2404 ................................................................................................................................................. 282
3.9.6 2405 ................................................................................................................................................. 282
3.9.7 2406 ................................................................................................................................................. 282
3.9.8 2407 ................................................................................................................................................. 283
3.9.9 2408 ................................................................................................................................................. 283
3.9.10 2409 ............................................................................................................................................... 284
3.9.11 2410 ............................................................................................................................................... 284
3.9.12 2411 ............................................................................................................................................... 284
3.9.13 2412 ............................................................................................................................................... 285
3.9.14 2413 ............................................................................................................................................... 285
3.9.15 2414 ............................................................................................................................................... 285
3.9.16 2415 ............................................................................................................................................... 286
3.9.17 2416 ............................................................................................................................................... 286
3.9.18 2417 ............................................................................................................................................... 287
3.9.19 2418 ............................................................................................................................................... 287
3.9.20 2419 ............................................................................................................................................... 287
3.9.21 2420 ............................................................................................................................................... 288
3.9.22 2421 ............................................................................................................................................... 288
3.9.23 2422 ............................................................................................................................................... 288
3.9.24 2423 ............................................................................................................................................... 289
3.9.25 2424 ............................................................................................................................................... 289
3.9.26 2425 ............................................................................................................................................... 290
3.9.27 2426 ............................................................................................................................................... 290
3.9.28 2427 ............................................................................................................................................... 290
3.9.29 2428 ............................................................................................................................................... 291
3.9.30 2429 ............................................................................................................................................... 291

12 www.honeywell.com
 CONTENTS

3.9.31 2430 ............................................................................................................................................... 291

3.9.32 2431 ............................................................................................................................................... 292
3.9.33 2432 ............................................................................................................................................... 292
3.9.34 2433 ............................................................................................................................................... 292
3.9.35 2435 ............................................................................................................................................... 293
3.9.36 2436 ............................................................................................................................................... 293
3.9.37 2437 ............................................................................................................................................... 294
3.9.38 2438 ............................................................................................................................................... 294
3.9.39 2439 ............................................................................................................................................... 294
3.9.40 2440 ............................................................................................................................................... 295
3.9.41 2441 ............................................................................................................................................... 295
3.9.42 2442 ............................................................................................................................................... 295
3.9.43 2443 ............................................................................................................................................... 296
3.9.44 2444 ............................................................................................................................................... 296
3.9.45 2445 ............................................................................................................................................... 296
3.9.46 2446 ............................................................................................................................................... 297
3.9.47 2447 ............................................................................................................................................... 297
3.9.48 2448 ............................................................................................................................................... 298
3.9.49 2449 ............................................................................................................................................... 298
3.9.50 2450 ............................................................................................................................................... 299
3.9.51 2451 ............................................................................................................................................... 299
3.9.52 2452 ............................................................................................................................................... 299
3.9.53 2453 ............................................................................................................................................... 300
3.9.54 2454 ............................................................................................................................................... 300
3.9.55 2455 ............................................................................................................................................... 300
3.9.56 2456 ............................................................................................................................................... 301
3.9.57 2457 ............................................................................................................................................... 301
3.9.58 2458 ............................................................................................................................................... 301
3.9.59 2459 ............................................................................................................................................... 302
3.9.60 2460 ............................................................................................................................................... 302
3.9.61 2461 ............................................................................................................................................... 303
3.9.62 2462 ............................................................................................................................................... 303
3.9.63 2463 ............................................................................................................................................... 304
3.9.64 2464 ............................................................................................................................................... 304
3.9.65 2465 ............................................................................................................................................... 304
3.9.66 2466 ............................................................................................................................................... 305
3.9.67 2467 ............................................................................................................................................... 305
3.9.68 2468 ............................................................................................................................................... 306
3.9.69 2600 ............................................................................................................................................... 306
3.9.70 2601 ............................................................................................................................................... 306
3.10 Codes 2651 to 2699 ...................................................................................................................................... 308
3.10.1 2657 ............................................................................................................................................... 308
3.11 Codes 2700 to 2799 ...................................................................................................................................... 309
3.11.1 2700 ................................................................................................................................................ 311
3.11.2 2701 ................................................................................................................................................ 311
3.11.3 2702 ................................................................................................................................................ 311
3.11.4 2707 ............................................................................................................................................... 312
3.11.5 2708 ............................................................................................................................................... 312
3.11.6 2709 ............................................................................................................................................... 312
3.11.7 2710 ............................................................................................................................................... 313
3.11.8 2711 ................................................................................................................................................ 313
3.11.9 2712 ............................................................................................................................................... 313
3.11.10 2713 ............................................................................................................................................. 314
3.11.11 2714 .............................................................................................................................................. 314

13
CONTENTS

3.11.12 2715 ............................................................................................................................................. 314

3.11.13 2716 ............................................................................................................................................. 315
3.11.14 2717 ............................................................................................................................................. 315
3.11.15 2718 ............................................................................................................................................. 315
3.11.16 2719 ............................................................................................................................................. 316
3.11.17 2720 ............................................................................................................................................. 316
3.11.18 2721 ............................................................................................................................................. 316
3.11.19 2722 ............................................................................................................................................. 317
3.11.20 2723 ............................................................................................................................................. 317
3.11.21 2724 ............................................................................................................................................. 317
3.11.22 2725 ............................................................................................................................................. 318
3.11.23 2726 ............................................................................................................................................. 318
3.11.24 2727 ............................................................................................................................................. 318
3.11.25 2728 ............................................................................................................................................. 319
3.11.26 2729 ............................................................................................................................................. 319
3.11.27 2730 ............................................................................................................................................. 319
3.11.28 2731 ............................................................................................................................................. 320
3.11.29 2732 ............................................................................................................................................. 320
3.11.30 2733 ............................................................................................................................................. 320
3.11.31 2734 ............................................................................................................................................. 321
3.11.32 2735 ............................................................................................................................................. 321
3.11.33 2736 ............................................................................................................................................. 321
3.11.34 2737 ............................................................................................................................................. 322
3.11.35 2738 ............................................................................................................................................. 322
3.11.36 2739 ............................................................................................................................................. 322
3.11.37 2740 ............................................................................................................................................. 323
3.11.38 2741 ............................................................................................................................................. 323
3.11.39 2742 ............................................................................................................................................. 323
3.11.40 2743 ............................................................................................................................................. 324
3.11.41 2744 ............................................................................................................................................. 324
3.11.42 2745 ............................................................................................................................................. 324
3.11.43 2746 ............................................................................................................................................. 325
3.11.44 2747 ............................................................................................................................................. 325
3.11.45 2748 ............................................................................................................................................. 325
3.11.46 2749 ............................................................................................................................................. 326
3.11.47 2750 ............................................................................................................................................. 326
3.11.48 2751 ............................................................................................................................................. 326
3.11.49 2752 ............................................................................................................................................. 327
3.11.50 2753 ............................................................................................................................................. 327
3.11.51 2754 ............................................................................................................................................. 327
3.11.52 2755 ............................................................................................................................................. 328
3.11.53 2756 ............................................................................................................................................. 328
3.11.54 2757 ............................................................................................................................................. 328
3.11.55 2758 ............................................................................................................................................. 329
3.11.56 2759 ............................................................................................................................................. 329
3.11.57 2760 ............................................................................................................................................. 329
3.11.58 2761 ............................................................................................................................................. 330
3.11.59 2762 ............................................................................................................................................. 330
3.11.60 2763 ............................................................................................................................................. 330
3.11.61 2764 ............................................................................................................................................. 331
3.11.62 2765 ............................................................................................................................................. 331
3.11.63 2766 ............................................................................................................................................. 332
3.11.64 2767 ............................................................................................................................................. 332
3.11.65 2768 ............................................................................................................................................. 332

14 www.honeywell.com
 CONTENTS

3.11.66 2770 ............................................................................................................................................. 333

3.11.67 2771 ............................................................................................................................................. 333
3.11.68 2772 ............................................................................................................................................. 333
3.11.69 2773 ............................................................................................................................................. 334
3.11.70 2774 ............................................................................................................................................. 334
3.11.71 2775 ............................................................................................................................................. 334
3.11.72 2776 ............................................................................................................................................. 335
3.11.73 2777 ............................................................................................................................................. 335
3.11.74 2778 ............................................................................................................................................. 335
3.11.75 2779 ............................................................................................................................................. 336
3.11.76 2780 ............................................................................................................................................. 336
3.11.77 2781 ............................................................................................................................................. 336
3.11.78 2782 ............................................................................................................................................. 337
3.11.79 2783 ............................................................................................................................................. 337
3.11.80 2784 ............................................................................................................................................. 337
3.11.81 2785 ............................................................................................................................................. 338
3.11.82 2786 ............................................................................................................................................. 338
3.11.83 2787 ............................................................................................................................................. 338
3.11.84 2788 ............................................................................................................................................. 339
3.11.85 2789 ............................................................................................................................................. 339
3.11.86 2790 ............................................................................................................................................. 339
3.11.87 2791 ............................................................................................................................................. 340
3.11.88 2792 ............................................................................................................................................. 340
3.11.89 2793 ............................................................................................................................................. 340
3.11.90 2794 ............................................................................................................................................. 341
3.11.91 2795 ............................................................................................................................................. 341
3.11.92 2796 ............................................................................................................................................. 342
3.11.93 2797 ............................................................................................................................................. 342
3.11.94 2798 ............................................................................................................................................. 342
3.11.95 2799 ............................................................................................................................................. 343
3.12 Codes 2800 to 2820 ...................................................................................................................................... 344
3.12.1 2800 ............................................................................................................................................... 344
3.12.2 2801 ............................................................................................................................................... 344
3.12.3 2802 ............................................................................................................................................... 345
3.12.4 2803 ............................................................................................................................................... 345
3.12.5 2804 ............................................................................................................................................... 345
3.12.6 2805 ............................................................................................................................................... 346
3.12.7 2806 ............................................................................................................................................... 346
3.12.8 2807 ............................................................................................................................................... 346
3.12.9 2808 ............................................................................................................................................... 347
3.12.10 2809 ............................................................................................................................................. 347
3.12.11 2810 ............................................................................................................................................. 348
3.12.12 2811 ............................................................................................................................................. 348
3.12.13 2812 ............................................................................................................................................. 348
3.12.14 2813 ............................................................................................................................................. 349
3.12.15 2814 ............................................................................................................................................. 349
3.12.16 2815 ............................................................................................................................................. 349
3.12.17 2817 ............................................................................................................................................. 350
3.12.18 2818 ............................................................................................................................................. 350
3.12.19 2819 ............................................................................................................................................. 350
3.13 Codes 2900 to 2997 ...................................................................................................................................... 352
3.13.1 2900 ............................................................................................................................................... 353
3.13.2 2901 ............................................................................................................................................... 353
3.13.3 2902 ............................................................................................................................................... 353

15
CONTENTS

3.13.4 2903 ............................................................................................................................................... 354

3.13.5 2904 ............................................................................................................................................... 354
3.13.6 2905 ............................................................................................................................................... 354
3.13.7 2951 ............................................................................................................................................... 355
3.13.8 2952 ............................................................................................................................................... 355
3.13.9 2953 ............................................................................................................................................... 355
3.13.10 2954 ............................................................................................................................................. 356
3.13.11 2955 ............................................................................................................................................. 356
3.13.12 2956 ............................................................................................................................................. 356
3.13.13 2957 ............................................................................................................................................. 357
3.13.14 2958 ............................................................................................................................................. 357
3.13.15 2959 ............................................................................................................................................. 357
3.13.16 2960 ............................................................................................................................................. 358
3.13.17 2961 ............................................................................................................................................. 358
3.13.18 2962 ............................................................................................................................................. 358
3.13.19 2963 ............................................................................................................................................. 359
3.13.20 2964 ............................................................................................................................................. 359
3.13.21 2965 ............................................................................................................................................. 359
3.13.22 2966 ............................................................................................................................................. 360
3.13.23 2967 ............................................................................................................................................. 360
3.13.24 2968 ............................................................................................................................................. 360
3.13.25 2969 ............................................................................................................................................. 361
3.13.26 2970 ............................................................................................................................................. 361
3.13.27 2971 ............................................................................................................................................. 361
3.13.28 2972 ............................................................................................................................................. 362
3.13.29 2973 ............................................................................................................................................. 362
3.13.30 2974 ............................................................................................................................................. 362
3.13.31 2975 ............................................................................................................................................. 363
3.13.32 2976 ............................................................................................................................................. 363
3.13.33 2977 ............................................................................................................................................. 363
3.13.34 2978 ............................................................................................................................................. 364
3.13.35 2979 ............................................................................................................................................. 364
3.13.36 2980 ............................................................................................................................................. 364
3.13.37 2981 ............................................................................................................................................. 365
3.13.38 2982 ............................................................................................................................................. 365
3.13.39 2983 ............................................................................................................................................. 366
3.13.40 2984 ............................................................................................................................................. 366
3.13.41 2985 ............................................................................................................................................. 366
3.13.42 2986 ............................................................................................................................................. 367
3.13.43 2987 ............................................................................................................................................. 367
3.13.44 2988 ............................................................................................................................................. 367
3.13.45 2989 ............................................................................................................................................. 368
3.13.46 2990 ............................................................................................................................................. 368
3.13.47 2991 ............................................................................................................................................. 369
3.13.48 2992 ............................................................................................................................................. 369
3.13.49 2993 ............................................................................................................................................. 370
3.13.50 2994 ............................................................................................................................................. 370
3.13.51 2995 ............................................................................................................................................. 371
3.13.52 2996 ............................................................................................................................................. 371
3.13.53 2997 ............................................................................................................................................. 371
3.14 Codes 3005 to 3198 ...................................................................................................................................... 373
3.14.1 3005 ............................................................................................................................................... 373
3.14.2 3006 ............................................................................................................................................... 374
3.14.3 3007 ............................................................................................................................................... 374

16 www.honeywell.com
 CONTENTS

3.14.4 3008 ............................................................................................................................................... 374

3.14.5 3009 ............................................................................................................................................... 375
3.14.6 3010 ............................................................................................................................................... 375
3.14.7 3011 ............................................................................................................................................... 375
3.14.8 3012 ............................................................................................................................................... 376
3.14.9 3013 ............................................................................................................................................... 376
3.14.10 3014 ............................................................................................................................................. 376
3.14.11 3015 ............................................................................................................................................. 377
3.14.12 3016 ............................................................................................................................................. 377
3.14.13 3019 ............................................................................................................................................. 377
3.14.14 3020 ............................................................................................................................................. 378
3.14.15 3021 ............................................................................................................................................. 378
3.14.16 3022 ............................................................................................................................................. 378
3.14.17 3023 ............................................................................................................................................. 379
3.14.18 3024 ............................................................................................................................................. 379
3.14.19 3025 ............................................................................................................................................. 379
3.14.20 3026 ............................................................................................................................................. 380
3.14.21 3027 ............................................................................................................................................. 380
3.14.22 3028 ............................................................................................................................................. 380
3.14.23 3029 ............................................................................................................................................. 381
3.14.24 3030 ............................................................................................................................................. 381
3.14.25 3031 ............................................................................................................................................. 381
3.14.26 3032 ............................................................................................................................................. 382
3.15 Codes 3100 to 3198 ...................................................................................................................................... 383
3.15.1 3100 ............................................................................................................................................... 385
3.15.2 3101 ............................................................................................................................................... 385
3.15.3 3102 ............................................................................................................................................... 385
3.15.4 3103 ............................................................................................................................................... 386
3.15.5 3104 ............................................................................................................................................... 386
3.15.6 3105 ............................................................................................................................................... 386
3.15.7 3106 ............................................................................................................................................... 387
3.15.8 3107 ............................................................................................................................................... 387
3.15.9 3108 ............................................................................................................................................... 387
3.15.10 3109 ............................................................................................................................................. 388
3.15.11 3110 .............................................................................................................................................. 388
3.15.12 3111 .............................................................................................................................................. 388
3.15.13 3112 ............................................................................................................................................. 389
3.15.14 3113 ............................................................................................................................................. 389
3.15.15 3114 ............................................................................................................................................. 389
3.15.16 3115 ............................................................................................................................................. 390
3.15.17 3116 ............................................................................................................................................. 390
3.15.18 3117 ............................................................................................................................................. 390
3.15.19 3118 ............................................................................................................................................. 391
3.15.20 3119 ............................................................................................................................................. 391
3.15.21 3120 ............................................................................................................................................. 391
3.15.22 3121 ............................................................................................................................................. 392
3.15.23 3122 ............................................................................................................................................. 392
3.15.24 3123 ............................................................................................................................................. 392
3.15.25 3124 ............................................................................................................................................. 393
3.15.26 3125 ............................................................................................................................................. 393
3.15.27 3126 ............................................................................................................................................. 393
3.15.28 3127 ............................................................................................................................................. 394
3.15.29 3128 ............................................................................................................................................. 394
3.15.30 3129 ............................................................................................................................................. 394

17
CONTENTS

3.15.31 3130 ............................................................................................................................................. 395

3.15.32 3131 ............................................................................................................................................. 395
3.15.33 3132 ............................................................................................................................................. 395
3.15.34 3134 ............................................................................................................................................. 396
3.15.35 3135 ............................................................................................................................................. 396
3.15.36 3136 ............................................................................................................................................. 396
3.15.37 3137 ............................................................................................................................................. 397
3.15.38 3138 ............................................................................................................................................. 397
3.15.39 3139 ............................................................................................................................................. 397
3.15.40 3140 ............................................................................................................................................. 398
3.15.41 3150 ............................................................................................................................................. 398
3.15.42 3151 ............................................................................................................................................. 398
3.15.43 3152 ............................................................................................................................................. 399
3.15.44 3153 ............................................................................................................................................. 399
3.15.45 3154 ............................................................................................................................................. 399
3.15.46 3155 ............................................................................................................................................. 400
3.15.47 3156 ............................................................................................................................................. 400
3.15.48 3157 ............................................................................................................................................. 400
3.15.49 3158 ............................................................................................................................................. 401
3.15.50 3159 ............................................................................................................................................. 401
3.15.51 3160 ............................................................................................................................................. 401
3.15.52 3161 ............................................................................................................................................. 402
3.15.53 3162 ............................................................................................................................................. 402
3.15.54 3163 ............................................................................................................................................. 402
3.15.55 3164 ............................................................................................................................................. 403
3.15.56 3165 ............................................................................................................................................. 403
3.15.57 3166 ............................................................................................................................................. 403
3.15.58 3167 ............................................................................................................................................. 404
3.15.59 3168 ............................................................................................................................................. 404
3.15.60 3169 ............................................................................................................................................. 404
3.15.61 3170 ............................................................................................................................................. 405
3.15.62 3171 ............................................................................................................................................. 405
3.15.63 3172 ............................................................................................................................................. 405
3.15.64 3173 ............................................................................................................................................. 406
3.15.65 3174 ............................................................................................................................................. 406
3.15.66 3175 ............................................................................................................................................. 406
3.15.67 3176 ............................................................................................................................................. 407
3.15.68 3177 ............................................................................................................................................. 407
3.15.69 3178 ............................................................................................................................................. 407
3.15.70 3179 ............................................................................................................................................. 408
3.15.71 3180 ............................................................................................................................................. 408
3.15.72 3181 ............................................................................................................................................. 408
3.15.73 3182 ............................................................................................................................................. 409
3.15.74 3183 ............................................................................................................................................. 409
3.15.75 3184 ............................................................................................................................................. 409
3.15.76 3185 ............................................................................................................................................. 410
3.15.77 3186 ............................................................................................................................................. 410
3.15.78 3187 ............................................................................................................................................. 410
3.15.79 3188 ............................................................................................................................................. 411
3.15.80 3189 ............................................................................................................................................. 411
3.15.81 3190 ............................................................................................................................................. 411
3.15.82 3191 ............................................................................................................................................. 412
3.15.83 3192 ............................................................................................................................................. 412
3.15.84 3193 ............................................................................................................................................. 412

18 www.honeywell.com
 CONTENTS

3.15.85 3194 ............................................................................................................................................. 413

3.15.86 3195 ............................................................................................................................................. 413
3.15.87 3196 ............................................................................................................................................. 413
3.15.88 3197 ............................................................................................................................................. 414
3.15.89 3198 ............................................................................................................................................. 414
3.16 Codes 3200 to 3521 ...................................................................................................................................... 415
3.16.1 3200 ............................................................................................................................................... 416
3.16.2 3201 ............................................................................................................................................... 416
3.16.3 3202 ............................................................................................................................................... 417
3.16.4 3203 ............................................................................................................................................... 417
3.16.5 3204 ............................................................................................................................................... 417
3.16.6 3205 ............................................................................................................................................... 418
3.16.7 3206 ............................................................................................................................................... 418
3.16.8 3207 ............................................................................................................................................... 418
3.16.9 3208 ............................................................................................................................................... 419
3.16.10 3209 ............................................................................................................................................. 419
3.16.11 3210 ............................................................................................................................................. 419
3.16.12 3212 ............................................................................................................................................. 420
3.16.13 3213 ............................................................................................................................................. 420
3.16.14 3214 ............................................................................................................................................. 420
3.16.15 3215 ............................................................................................................................................. 421
3.16.16 3216 ............................................................................................................................................. 421
3.16.17 3217 ............................................................................................................................................. 421
3.16.18 3218 ............................................................................................................................................. 422
3.16.19 3219 ............................................................................................................................................. 422
3.16.20 3220 ............................................................................................................................................. 422
3.16.21 3221 ............................................................................................................................................. 423
3.16.22 3222 ............................................................................................................................................. 423
3.16.23 3223 ............................................................................................................................................. 423
3.16.24 3224 ............................................................................................................................................. 424
3.16.25 3225 ............................................................................................................................................. 424
3.16.26 3226 ............................................................................................................................................. 424
3.16.27 3227 ............................................................................................................................................. 425
3.16.28 3250 ............................................................................................................................................. 425
3.16.29 3251 ............................................................................................................................................. 425
3.16.30 3252 ............................................................................................................................................. 426
3.16.31 3253 ............................................................................................................................................. 426
3.16.32 3254 ............................................................................................................................................. 426
3.16.33 3255 ............................................................................................................................................. 427
3.16.34 3256 ............................................................................................................................................. 427
3.16.35 3257 ............................................................................................................................................. 427
3.16.36 3258 ............................................................................................................................................. 428
3.16.37 3259 ............................................................................................................................................. 428
3.16.38 3260 ............................................................................................................................................. 428
3.16.39 3261 ............................................................................................................................................. 429
3.16.40 3262 ............................................................................................................................................. 429
3.16.41 3263 ............................................................................................................................................. 429
3.16.42 3264 ............................................................................................................................................. 430
3.16.43 3265 ............................................................................................................................................. 430
3.16.44 3266 ............................................................................................................................................. 430
3.16.45 3267 ............................................................................................................................................. 431
3.16.46 3268 ............................................................................................................................................. 431
3.16.47 3269 ............................................................................................................................................. 431
3.16.48 3270 ............................................................................................................................................. 432

19
CONTENTS

3.16.49 3271 ............................................................................................................................................. 432

3.16.50 3272 ............................................................................................................................................. 432
3.16.51 3273 ............................................................................................................................................. 433
3.16.52 3274 ............................................................................................................................................. 433
3.16.53 3275 ............................................................................................................................................. 433
3.16.54 3276 ............................................................................................................................................. 434
3.16.55 3277 ............................................................................................................................................. 434
3.16.56 3278 ............................................................................................................................................. 434
3.16.57 3279 ............................................................................................................................................. 435
3.16.58 3280 ............................................................................................................................................. 435
3.16.59 3281 ............................................................................................................................................. 435
3.16.60 3282 ............................................................................................................................................. 436
3.16.61 3290 ............................................................................................................................................. 436
3.16.62 3291 ............................................................................................................................................. 436
3.16.63 3292 ............................................................................................................................................. 437
3.16.64 3293 ............................................................................................................................................. 437
3.16.65 3294 ............................................................................................................................................. 437
3.16.66 3295 ............................................................................................................................................. 438
3.16.67 3296 ............................................................................................................................................. 438
3.17 Codes 3300 to 3365 ...................................................................................................................................... 439
3.17.1 3300 ............................................................................................................................................... 440
3.17.2 3301 ............................................................................................................................................... 440
3.17.3 3302 ............................................................................................................................................... 440
3.17.4 3303 ............................................................................................................................................... 441
3.17.5 3304 ............................................................................................................................................... 441
3.17.6 3305 ............................................................................................................................................... 441
3.17.7 3306 ............................................................................................................................................... 442
3.17.8 3310 ............................................................................................................................................... 442
3.17.9 3311 ............................................................................................................................................... 442
3.17.10 3312 ............................................................................................................................................. 443
3.17.11 3313 ............................................................................................................................................. 443
3.17.12 3318 ............................................................................................................................................. 443
3.17.13 3319 ............................................................................................................................................. 444
3.17.14 3321 ............................................................................................................................................. 444
3.17.15 3322 ............................................................................................................................................. 444
3.17.16 3323 ............................................................................................................................................. 445
3.17.17 3324 ............................................................................................................................................. 445
3.17.18 3325 ............................................................................................................................................. 445
3.17.19 3326 ............................................................................................................................................. 446
3.17.20 3327 ............................................................................................................................................. 446
3.17.21 3328 ............................................................................................................................................. 446
3.17.22 3329 ............................................................................................................................................. 447
3.17.23 3330 ............................................................................................................................................. 447
3.17.24 3332 ............................................................................................................................................. 447
3.17.25 3334 ............................................................................................................................................. 448
3.17.26 3335 ............................................................................................................................................. 448
3.17.27 3336 ............................................................................................................................................. 448
3.17.28 3337 ............................................................................................................................................. 449
3.17.29 3338 ............................................................................................................................................. 449
3.17.30 3340 ............................................................................................................................................. 449
3.17.31 3341 ............................................................................................................................................. 450
3.17.32 3342 ............................................................................................................................................. 450
3.17.33 3343 ............................................................................................................................................. 450
3.17.34 3344 ............................................................................................................................................. 451

20 www.honeywell.com
 CONTENTS

3.17.35 3345 ............................................................................................................................................. 451

3.17.36 3346 ............................................................................................................................................. 451
3.17.37 3347 ............................................................................................................................................. 452
3.17.38 3348 ............................................................................................................................................. 452
3.17.39 3350 ............................................................................................................................................. 452
3.17.40 3351 ............................................................................................................................................. 453
3.17.41 3352 ............................................................................................................................................. 453
3.17.42 3353 ............................................................................................................................................. 453
3.17.43 3354 ............................................................................................................................................. 454
3.17.44 3355 ............................................................................................................................................. 454
3.17.45 3356 ............................................................................................................................................. 454
3.17.46 3357 ............................................................................................................................................. 455
3.17.47 3358 ............................................................................................................................................. 455
3.17.48 3359 ............................................................................................................................................. 455
3.17.49 3360 ............................................................................................................................................. 456
3.17.50 3361 ............................................................................................................................................. 456
3.17.51 3362 ............................................................................................................................................. 456
3.17.52 3363 ............................................................................................................................................. 457
3.17.53 3364 ............................................................................................................................................. 457
3.17.54 3365 ............................................................................................................................................. 457
3.18 Codes 3600 to 3699 ...................................................................................................................................... 459
3.18.1 3600 - FIM_E_APP_AIL_COMM_TIMEOUT ............................................................................ 461
3.18.2 3600 - SFC_SUCCESS .................................................................................................................. 461
3.18.3 3601 - FIM_E_APP_ILLEGAL_CS_ADDR ................................................................................ 462
3.18.4 3601 - SFC_FAILURE .................................................................................................................. 462
3.18.5 3602 - FIM_E_APP_NO_UCD_AVAILABLE ............................................................................. 462
3.18.6 3602 - SFC_OTHER ...................................................................................................................... 463
3.18.7 3603 - FIM_E_APP_CS_ADDR_OCCUPIED ............................................................................. 463
3.18.8 3603 - SFC_INVALID_ARGUMENT .......................................................................................... 463
3.18.9 3604 - FIM_E_APP_UNEXPECTED_CONFIG_ERR ................................................................ 464
3.18.10 3604 - SFC_INVALID_OBJ_ID ................................................................................................. 464
3.18.11 3605 - FIM_E_APP_PARAMETER_NOT_IN_CACHE ........................................................... 464
3.18.12 3605 - SFC_INVALID_SERVICE .............................................................................................. 465
3.18.13 3606 - FIM_E_APP_DEV_POOL_FULL .................................................................................. 465
3.18.14 3606 - SFC_INVALID_ATTRIBUTE ......................................................................................... 465
3.18.15 3607 - FIM_E_APP_ALLOC_TX_BUF_FAIL .......................................................................... 466
3.18.16 3607 - SFC_INVALID_ELEMENT_INDEX .............................................................................. 466
3.18.17 3608 - FIM_E_APP_NULL_DEV_PTR ..................................................................................... 466
3.18.18 3608 - SFC_READ_ONLY_ATTRIBUTE .................................................................................. 467
3.18.19 3609 - FIM_E_APP_TAG_CHANGE_NOT_UCD .................................................................... 467
3.18.20 3609 - SFC_VALUE_OUT_OF_RANGE ................................................................................... 467
3.18.21 3610 - FIM_E_APP_MFB_NOT_LOADED .............................................................................. 468
3.18.22 3610 - SFC_INNAPROPRIATE_PROCESS_MODE ................................................................ 468
3.18.23 3611 - FIM_E_APP_MODBUS_MAX_TABLE_SIZE .............................................................. 468
3.18.24 3611 - SFC_INCOMPATIBLE_MODE ...................................................................................... 469
3.18.25 3612 - FIM_E_APP_NULL_PAR_PTR ...................................................................................... 469
3.18.26 3612 - SFC_INVALID_VALUE .................................................................................................. 469
3.18.27 3613 - FIM_E_APP_STORE_NOT_ALLOWED ....................................................................... 470
3.18.28 3613 - SFC_INTERNAL_ERROR .............................................................................................. 470
3.18.29 3614 - FIM_E_APP_NO_REQ_ID ............................................................................................. 470
3.18.30 3614 - SFC_INVALID_SIZE ...................................................................................................... 471
3.18.31 3615 - FIM_E_APP_FMWUPG_INPROG ................................................................................. 471
3.18.32 3615 - SFC_INCOMPATIBLE_ATTRIBUTE ............................................................................ 471
3.18.33 3616 ............................................................................................................................................. 472

21
CONTENTS

3.18.34 3617 ............................................................................................................................................. 472

3.18.35 3618 ............................................................................................................................................. 472
3.18.36 3619 ............................................................................................................................................. 473
3.18.37 3620 ............................................................................................................................................. 473
3.18.38 3621 ............................................................................................................................................. 473
3.18.39 3622 ............................................................................................................................................. 474
3.18.40 3623 ............................................................................................................................................. 474
3.18.41 3624 ............................................................................................................................................. 474
3.18.42 3625 ............................................................................................................................................. 475
3.18.43 3626 ............................................................................................................................................. 475
3.18.44 3627 ............................................................................................................................................. 475
3.18.45 3628 ............................................................................................................................................. 476
3.18.46 3629 ............................................................................................................................................. 476
3.18.47 3630 ............................................................................................................................................. 476
3.18.48 3631 ............................................................................................................................................. 477
3.18.49 3632 ............................................................................................................................................. 477
3.18.50 3633 ............................................................................................................................................. 477
3.18.51 3634 ............................................................................................................................................. 478
3.18.52 3635 ............................................................................................................................................. 478
3.18.53 3636 ............................................................................................................................................. 478
3.18.54 3637 ............................................................................................................................................. 479
3.18.55 3638 ............................................................................................................................................. 479
3.18.56 3639 ............................................................................................................................................. 479
3.18.57 3640 ............................................................................................................................................. 480
3.18.58 3641 ............................................................................................................................................. 480
3.18.59 3642 ............................................................................................................................................. 480
3.18.60 3643 ............................................................................................................................................. 481
3.18.61 3644 ............................................................................................................................................. 481
3.18.62 3645 ............................................................................................................................................. 481
3.18.63 3646 ............................................................................................................................................. 482
3.18.64 3647 ............................................................................................................................................. 482
3.18.65 3648 ............................................................................................................................................. 482
3.18.66 3649 ............................................................................................................................................. 483
3.18.67 3650 ............................................................................................................................................. 483
3.18.68 3651 ............................................................................................................................................. 483
3.18.69 3652 ............................................................................................................................................. 484
3.18.70 3653 ............................................................................................................................................. 484
3.18.71 3654 ............................................................................................................................................. 484
3.18.72 3655 ............................................................................................................................................. 485
3.18.73 3656 ............................................................................................................................................. 485
3.18.74 3657 ............................................................................................................................................. 485
3.18.75 3658 ............................................................................................................................................. 486
3.18.76 3659 ............................................................................................................................................. 486
3.18.77 3660 ............................................................................................................................................. 486
3.18.78 3661 ............................................................................................................................................. 487
3.18.79 3662 ............................................................................................................................................. 487
3.18.80 3663 ............................................................................................................................................. 487
3.18.81 3664 ............................................................................................................................................. 488
3.18.82 3665 ............................................................................................................................................. 488
3.18.83 3666 ............................................................................................................................................. 488
3.18.84 3667 ............................................................................................................................................. 489
3.18.85 3668 ............................................................................................................................................. 489
3.18.86 3669 ............................................................................................................................................. 489
3.18.87 3670 ............................................................................................................................................. 490

22 www.honeywell.com
 CONTENTS

3.18.88 3671 ............................................................................................................................................. 490

3.18.89 3672 ............................................................................................................................................. 490
3.18.90 3673 ............................................................................................................................................. 491
3.18.91 3674 ............................................................................................................................................. 491
3.18.92 3675 ............................................................................................................................................. 491
3.18.93 3676 ............................................................................................................................................. 492
3.18.94 3677 ............................................................................................................................................. 492
3.18.95 3678 ............................................................................................................................................. 492
3.18.96 3679 ............................................................................................................................................. 493
3.18.97 3680 ............................................................................................................................................. 493
3.18.98 3681 ............................................................................................................................................. 493
3.18.99 3682 ............................................................................................................................................. 494
3.18.100 3683 ........................................................................................................................................... 494
3.18.101 3684 ........................................................................................................................................... 494
3.18.102 3685 ........................................................................................................................................... 495
3.18.103 3686 ........................................................................................................................................... 495
3.18.104 3687 ........................................................................................................................................... 495
3.18.105 3688 ........................................................................................................................................... 496
3.18.106 3689 ........................................................................................................................................... 496
3.18.107 3690 ........................................................................................................................................... 496
3.18.108 3691 ........................................................................................................................................... 497
3.18.109 3692 ........................................................................................................................................... 497
3.18.110 3693 ........................................................................................................................................... 497
3.18.111 3694 ............................................................................................................................................ 498
3.18.112 3695 ........................................................................................................................................... 498
3.18.113 3696 ........................................................................................................................................... 498
3.18.114 3697 ........................................................................................................................................... 499
3.18.115 3698 ........................................................................................................................................... 499
3.18.116 3699 ........................................................................................................................................... 499
3.19 Codes 3700 to 3827 ...................................................................................................................................... 501
3.19.1 3700 - FIM_E_AIL_OK ................................................................................................................ 504
3.19.2 3700 - ISA_E_SFC_STANDARD_100 ......................................................................................... 504
3.19.3 3701 - FIM_E_AIL_INVALID_ARG ........................................................................................... 504
3.19.4 3701 - ISA_E_SFC_STANDARD_101 ......................................................................................... 505
3.19.5 3702 - FIM_E_AIL_INVALID_OID ............................................................................................. 505
3.19.6 3702 - ISA_E_SFC_STANDARD_102 ......................................................................................... 505
3.19.7 3703 - FIM_E_AIL_UNSUPP_SVC ............................................................................................. 506
3.19.8 3703 - ISA_E_SFC_STANDARD_103 ......................................................................................... 506
3.19.9 3704 - FIM_E_AIL_INVALID_PARAM ...................................................................................... 506
3.19.10 3704 - ISA_E_SFC_STANDARD_104 ....................................................................................... 507
3.19.11 3705 - FIM_E_AIL_INVALID_ELEM ....................................................................................... 507
3.19.12 3705 - ISA_E_SFC_STANDARD_105 ....................................................................................... 507
3.19.13 3706 - FIM_E_AIL_READ_ONLY ............................................................................................ 508
3.19.14 3706 - ISA_E_SFC_STANDARD_1006 ..................................................................................... 508
3.19.15 3707 - FIM_E_AIL_OUT_OF_RANGE ..................................................................................... 508
3.19.16 3707 - ISA_E_SFC_STANDARD_107 ....................................................................................... 509
3.19.17 3708 - FIM_E_AIL_WRONG_MODE ....................................................................................... 509
3.19.18 3708 - ISA_E_SFC_STANDARD_108 ....................................................................................... 509
3.19.19 3709 - FIM_E_AIL_ILLEGAL_VALUE .................................................................................... 510
3.19.20 3709 - ISA_E_SFC_STANDARD_109 ....................................................................................... 510
3.19.21 3710 ............................................................................................................................................. 510
3.19.22 3711 .............................................................................................................................................. 511
3.19.23 3712 ............................................................................................................................................. 511
3.19.24 3713 ............................................................................................................................................. 511

23
CONTENTS

3.19.25 3714 ............................................................................................................................................. 512

3.19.26 3715 ............................................................................................................................................. 512
3.19.27 3716 ............................................................................................................................................. 512
3.19.28 3717 ............................................................................................................................................. 513
3.19.29 3718 ............................................................................................................................................. 513
3.19.30 3719 ............................................................................................................................................. 513
3.19.31 3720 ............................................................................................................................................. 514
3.19.32 3721 ............................................................................................................................................. 514
3.19.33 3722 ............................................................................................................................................. 514
3.19.34 3723 ............................................................................................................................................. 515
3.19.35 3724 ............................................................................................................................................. 515
3.19.36 3725 ............................................................................................................................................. 515
3.19.37 3726 ............................................................................................................................................. 516
3.19.38 3727 ............................................................................................................................................. 516
3.19.39 3728 ............................................................................................................................................. 516
3.19.40 3729 ............................................................................................................................................. 517
3.19.41 3730 ............................................................................................................................................. 517
3.19.42 3731 ............................................................................................................................................. 517
3.19.43 3732 ............................................................................................................................................. 518
3.19.44 3733 ............................................................................................................................................. 518
3.19.45 3734 ............................................................................................................................................. 518
3.19.46 3735 ............................................................................................................................................. 519
3.19.47 3736 ............................................................................................................................................. 519
3.19.48 3737 ............................................................................................................................................. 519
3.19.49 3738 ............................................................................................................................................. 520
3.19.50 3739 ............................................................................................................................................. 520
3.19.51 3740 ............................................................................................................................................. 520
3.19.52 3741 ............................................................................................................................................. 521
3.19.53 3742 ............................................................................................................................................. 521
3.19.54 3743 ............................................................................................................................................. 521
3.19.55 3744 ............................................................................................................................................. 522
3.19.56 3745 ............................................................................................................................................. 522
3.19.57 3746 ............................................................................................................................................. 522
3.19.58 3747 ............................................................................................................................................. 523
3.19.59 3748 ............................................................................................................................................. 523
3.19.60 3749 ............................................................................................................................................. 523
3.19.61 3750 ............................................................................................................................................. 524
3.19.62 3751 ............................................................................................................................................. 524
3.19.63 3752 ............................................................................................................................................. 524
3.19.64 3753 ............................................................................................................................................. 525
3.19.65 3754 ............................................................................................................................................. 525
3.19.66 3755 ............................................................................................................................................. 525
3.19.67 3756 ............................................................................................................................................. 526
3.19.68 3757 ............................................................................................................................................. 526
3.19.69 3758 ............................................................................................................................................. 526
3.19.70 3759 ............................................................................................................................................. 527
3.19.71 3760 ............................................................................................................................................. 527
3.19.72 3761 ............................................................................................................................................. 527
3.19.73 3762 ............................................................................................................................................. 528
3.19.74 3763 ............................................................................................................................................. 528
3.19.75 3764 ............................................................................................................................................. 528
3.19.76 3765 ............................................................................................................................................. 529
3.19.77 3766 ............................................................................................................................................. 529
3.19.78 3767 ............................................................................................................................................. 529

24 www.honeywell.com
 CONTENTS

3.19.79 3768 ............................................................................................................................................. 530

3.19.80 3769 ............................................................................................................................................. 530
3.19.81 3770 ............................................................................................................................................. 530
3.19.82 3771 ............................................................................................................................................. 531
3.19.83 3772 ............................................................................................................................................. 531
3.19.84 3773 ............................................................................................................................................. 531
3.19.85 3774 ............................................................................................................................................. 532
3.19.86 3775 ............................................................................................................................................. 532
3.19.87 3776 ............................................................................................................................................. 532
3.19.88 3777 ............................................................................................................................................. 533
3.19.89 3778 ............................................................................................................................................. 533
3.19.90 3779 ............................................................................................................................................. 533
3.19.91 3780 ............................................................................................................................................. 534
3.19.92 3781 ............................................................................................................................................. 534
3.19.93 3782 ............................................................................................................................................. 534
3.19.94 3783 ............................................................................................................................................. 535
3.19.95 3784 ............................................................................................................................................. 535
3.19.96 3785 ............................................................................................................................................. 535
3.19.97 3786 ............................................................................................................................................. 536
3.19.98 3787 ............................................................................................................................................. 536
3.19.99 3788 ............................................................................................................................................. 536
3.19.100 3789 ........................................................................................................................................... 537
3.19.101 3790 ........................................................................................................................................... 537
3.19.102 3791 ........................................................................................................................................... 537
3.19.103 3792 ........................................................................................................................................... 538
3.19.104 3793 ........................................................................................................................................... 538
3.19.105 3794 ........................................................................................................................................... 538
3.19.106 3795 ........................................................................................................................................... 539
3.19.107 3796 ........................................................................................................................................... 539
3.19.108 3797 ........................................................................................................................................... 539
3.19.109 3798 ........................................................................................................................................... 540
3.19.110 3799 ........................................................................................................................................... 540
3.19.111 3800 ............................................................................................................................................ 540
3.19.112 3801 ........................................................................................................................................... 541
3.19.113 3802 ........................................................................................................................................... 541
3.19.114 3803 ........................................................................................................................................... 541
3.19.115 3804 ........................................................................................................................................... 542
3.19.116 3805 ........................................................................................................................................... 542
3.19.117 3806 ........................................................................................................................................... 542
3.19.118 3807 ........................................................................................................................................... 543
3.19.119 3808 ........................................................................................................................................... 543
3.19.120 3809 ........................................................................................................................................... 543
3.19.121 3810 ........................................................................................................................................... 544
3.19.122 3811 ........................................................................................................................................... 544
3.19.123 3812 ........................................................................................................................................... 544
3.19.124 3813 ........................................................................................................................................... 545
3.19.125 3814 ........................................................................................................................................... 545
3.19.126 3815 ........................................................................................................................................... 545
3.19.127 3816 ........................................................................................................................................... 546
3.19.128 3817 ........................................................................................................................................... 546
3.19.129 3818 ........................................................................................................................................... 546
3.19.130 3819 ........................................................................................................................................... 547
3.19.131 3820 ........................................................................................................................................... 547
3.19.132 3821 ........................................................................................................................................... 547

25
CONTENTS

3.19.133 3822 ........................................................................................................................................... 548

3.19.134 3823 ........................................................................................................................................... 548
3.19.135 3824 ........................................................................................................................................... 548
3.19.136 3825 ........................................................................................................................................... 549
3.19.137 3826 ........................................................................................................................................... 549
3.19.138 3827 ........................................................................................................................................... 549
3.20 Codes 3500 to 3521 ...................................................................................................................................... 550
3.20.1 3500 ............................................................................................................................................... 550
3.20.2 3501 ............................................................................................................................................... 551
3.20.3 3502 ............................................................................................................................................... 551
3.20.4 3503 ............................................................................................................................................... 551
3.20.5 3504 ............................................................................................................................................... 552
3.20.6 3510 ............................................................................................................................................... 552
3.20.7 3510 ............................................................................................................................................... 552
3.20.8 3511 - FIM_E_NVS_FILE_OPEN_FAIL ..................................................................................... 553
3.20.9 3511 - INVALID_DATA_LEN ...................................................................................................... 553
3.20.10 3512 - FIM_E_NVS_INVALID_VERSION ............................................................................... 553
3.20.11 3512 - INVALID_DATA_TYPE .................................................................................................. 554
3.20.12 3513 - FIM_E_NVS_WRITE_ERROR ...................................................................................... 554
3.20.13 3513 - INVALID_CS_ADDR ...................................................................................................... 554
3.20.14 3514 - FIM_E_NVS_SEEK_ERROR ......................................................................................... 555
3.20.15 3514 - INVALID_HANDLE ....................................................................................................... 555
3.20.16 3515 - FIM_E_NVS_READ_ERROR ........................................................................................ 555
3.20.17 3515 - MFB_NOT_LOADED ..................................................................................................... 556
3.20.18 3516 - FIM_E_NVS_PARDEF_NULL ....................................................................................... 556
3.20.19 3516 - RDN_PARTIPADDRESS_NOT_CONFIG ..................................................................... 556
3.20.20 3517 - FIM_E_NVS_PARDEF_ENTRY_NULL ........................................................................ 557
3.20.21 3517 - RDN_BECOMEPRI_NOT_KEYED ............................................................................... 557
3.20.22 3518 - FIM_E_NVS_PARDEF_DIR_ERROR ........................................................................... 557
3.20.23 3518 - APP_INIT_ONLINE_DATA_INPROG ........................................................................... 558
3.20.24 3519 - FIM_E_NVS_PARDEF_FLUSH_ERROR ..................................................................... 558
3.20.25 3519 - RDN_SYNC_DATA_TOO_LARGE ............................................................................... 558
3.20.26 3520 ............................................................................................................................................. 559
3.20.27 3521 ............................................................................................................................................. 559
3.21 Codes 3828 to 3899 ...................................................................................................................................... 560
3.21.1 3828 - FIM_E_AIL_VENDOR_SPEC_128 .................................................................................. 560
3.21.2 3828 - ISA_E_SFC_VENDOR_SPECIFIC_228 .......................................................................... 560
3.21.3 3829 - FIM_E_AIL_VENDOR_SPEC_129 .................................................................................. 560
3.21.4 3829 - ISA_E_SFC_VENDOR_SPECIFIC_229 .......................................................................... 561
3.21.5 3830 - FIM_E_AIL_VENDOR_SPEC_130 .................................................................................. 561
3.21.6 3830 - ISA_E_SFC_VENDOR_SPECIFIC_230 .......................................................................... 561
3.21.7 3831 - FIM_E_AIL_VENDOR_SPEC_131 .................................................................................. 562
3.21.8 3831 - ISA_E_SFC_VENDOR_SPECIFIC_231 .......................................................................... 562
3.21.9 3832 - FIM_E_AIL_VENDOR_SPEC_132 .................................................................................. 562
3.21.10 3832 - ISA_E_SFC_VENDOR_SPECIFIC_232 ........................................................................ 563
3.21.11 3833 - FIM_E_AIL_VENDOR_SPEC_133 ................................................................................ 563
3.21.12 3833 - ISA_E_SFC_VENDOR_SPECIFIC_233 ........................................................................ 563
3.21.13 3834 - FIM_E_AIL_VENDOR_SPEC_134 ................................................................................ 564
3.21.14 3834 - ISA_E_SFC_VENDOR_SPECIFIC_234 ........................................................................ 564
3.21.15 3835 - FIM_E_AIL_VENDOR_SPEC_135 ................................................................................ 564
3.21.16 3835 - ISA_E_SFC_VENDOR_SPECIFIC_235 ........................................................................ 565
3.21.17 3836 - FIM_E_AIL_VENDOR_SPEC_136 ................................................................................ 565
3.21.18 3836 - ISA_E_SFC_VENDOR_SPECIFIC_236 ........................................................................ 565
3.21.19 3837 - FIM_E_AIL_VENDOR_SPEC_137 ................................................................................ 566

26 www.honeywell.com
 CONTENTS

3.21.20 3837 - ISA_E_SFC_VENDOR_SPECIFIC_237 ........................................................................ 566

3.21.21 3838 - FIM_E_AIL_VENDOR_SPEC_138 ................................................................................ 566
3.21.22 3838 - ISA_E_SFC_VENDOR_SPECIFIC_238 ........................................................................ 567
3.21.23 3839 - FIM_E_AIL_VENDOR_SPEC_139 ................................................................................ 567
3.21.24 3839 - ISA_E_SFC_VENDOR_SPECIFIC_239 ........................................................................ 567
3.21.25 3840 - FIM_E_AIL_VENDOR_SPEC_140 ................................................................................ 568
3.21.26 3840 - ISA_E_SFC_VENDOR_SPECIFIC_240 ........................................................................ 568
3.21.27 3841 - FIM_E_AIL_VENDOR_SPEC_141 ................................................................................ 568
3.21.28 3841 - ISA_E_SFC_VENDOR_SPECIFIC_241 ........................................................................ 569
3.21.29 3842 - FIM_E_AIL_VENDOR_SPEC_142 ................................................................................ 569
3.21.30 3842 - ISA_E_SFC_VENDOR_SPECIFIC_242 ........................................................................ 569
3.21.31 3843 - FIM_E_AIL_VENDOR_SPEC_143 ................................................................................ 570
3.21.32 3843 - ISA_E_SFC_VENDOR_SPECIFIC_243 ........................................................................ 570
3.21.33 3844 - FIM_E_AIL_VENDOR_SPEC_144 ................................................................................ 570
3.21.34 3844 - ISA_E_SFC_VENDOR_SPECIFIC_244 ........................................................................ 571
3.21.35 3845 - FIM_E_AIL_VENDOR_SPEC_145 ................................................................................ 571
3.21.36 3845 - ISA_E_SFC_VENDOR_SPECIFIC_245 ........................................................................ 571
3.21.37 3846 - FIM_E_AIL_VENDOR_SPEC_146 ................................................................................ 572
3.21.38 3846 - ISA_E_SFC_VENDOR_SPECIFIC_246 ........................................................................ 572
3.21.39 3847 - FIM_E_AIL_VENDOR_SPEC_147 ................................................................................ 572
3.21.40 3847 - ISA_E_SFC_VENDOR_SPECIFIC_247 ........................................................................ 573
3.21.41 3848 - FIM_E_AIL_VENDOR_SPEC_148 ................................................................................ 573
3.21.42 3848 - ISA_E_SFC_VENDOR_SPECIFIC_248 ........................................................................ 573
3.21.43 3849 - FIM_E_AIL_VENDOR_SPEC_149 ................................................................................ 574
3.21.44 3849 - ISA_E_SFC_VENDOR_SPECIFIC_249 ........................................................................ 574
3.21.45 3850 - FIM_E_AIL_VENDOR_SPEC_150 ................................................................................ 574
3.21.46 3850 - ISA_E_SFC_VENDOR_SPECIFIC_250 ........................................................................ 575
3.21.47 3851 - FIM_E_AIL_VENDOR_SPEC_151 ................................................................................ 575
3.21.48 3851 - ISA_E_SFC_VENDOR_SPECIFIC_251 ........................................................................ 575
3.21.49 3852 - FIM_E_AIL_VENDOR_SPEC_152 ................................................................................ 576
3.21.50 3852 - ISA_E_SFC_VENDOR_SPECIFIC_252 ........................................................................ 576
3.21.51 3853 - FIM_E_AIL_VENDOR_SPEC_153 ................................................................................ 576
3.21.52 3853 - ISA_E_SFC_VENDOR_SPECIFIC_253 ........................................................................ 577
3.21.53 3854 - FIM_E_AIL_VENDOR_SPEC_154 ................................................................................ 577
3.21.54 3854 - ISA_E_SFC_VENDOR_SPECIFIC_254 ........................................................................ 577
3.21.55 3855 - FIM_E_AIL_VENDOR_SPEC_155 ................................................................................ 578
3.21.56 3855 - ISA_E_SFC_VENDOR_SPECIFIC_255 ........................................................................ 578
3.21.57 3856 ............................................................................................................................................. 578
3.21.58 3857 ............................................................................................................................................. 579
3.21.59 3858 ............................................................................................................................................. 579
3.21.60 3859 ............................................................................................................................................. 579
3.21.61 3860 ............................................................................................................................................. 580
3.21.62 3861 ............................................................................................................................................. 580
3.21.63 3862 ............................................................................................................................................. 580
3.21.64 3863 ............................................................................................................................................. 581
3.21.65 3864 ............................................................................................................................................. 581
3.21.66 3865 ............................................................................................................................................. 581
3.21.67 3866 ............................................................................................................................................. 582
3.21.68 3867 ............................................................................................................................................. 582
3.21.69 3868 ............................................................................................................................................. 582
3.21.70 3869 ............................................................................................................................................. 583
3.21.71 3870 ............................................................................................................................................. 583
3.21.72 3871 ............................................................................................................................................. 583
3.21.73 3872 ............................................................................................................................................. 584

27
CONTENTS

3.21.74 3873 ............................................................................................................................................. 584

3.21.75 3874 ............................................................................................................................................. 584
3.21.76 3875 ............................................................................................................................................. 585
3.21.77 3876 ............................................................................................................................................. 585
3.21.78 3877 ............................................................................................................................................. 585
3.21.79 3878 ............................................................................................................................................. 586
3.21.80 3879 ............................................................................................................................................. 586
3.21.81 3880 ............................................................................................................................................. 586
3.21.82 3881 ............................................................................................................................................. 587
3.21.83 3882 ............................................................................................................................................. 587
3.21.84 3883 ............................................................................................................................................. 587
3.21.85 3884 ............................................................................................................................................. 588
3.21.86 3885 ............................................................................................................................................. 588
3.21.87 3886 ............................................................................................................................................. 588
3.21.88 3887 ............................................................................................................................................. 589
3.21.89 3888 ............................................................................................................................................. 589
3.21.90 3889 ............................................................................................................................................. 589
3.21.91 3890 ............................................................................................................................................. 590
3.21.92 3891 ............................................................................................................................................. 590
3.21.93 3892 ............................................................................................................................................. 590
3.21.94 3893 ............................................................................................................................................. 591
3.21.95 3894 ............................................................................................................................................. 591
3.21.96 3895 ............................................................................................................................................. 591
3.21.97 3896 ............................................................................................................................................. 592
3.21.98 3897 ............................................................................................................................................. 592
3.21.99 3898 ............................................................................................................................................. 592
3.21.100 3899 ........................................................................................................................................... 593
3.22 Codes 3900 to 3955 ...................................................................................................................................... 594
3.22.1 3900 ............................................................................................................................................... 595
3.22.2 3901 ............................................................................................................................................... 595
3.22.3 3902 ............................................................................................................................................... 595
3.22.4 3903 ............................................................................................................................................... 596
3.22.5 3904 ............................................................................................................................................... 596
3.22.6 3905 ............................................................................................................................................... 596
3.22.7 3906 ............................................................................................................................................... 597
3.22.8 3907 ............................................................................................................................................... 597
3.22.9 3908 ............................................................................................................................................... 597
3.22.10 3909 ............................................................................................................................................. 598
3.22.11 3910 ............................................................................................................................................. 598
3.22.12 3911 ............................................................................................................................................. 598
3.22.13 3912 ............................................................................................................................................. 599
3.22.14 3913 ............................................................................................................................................. 599
3.22.15 3914 ............................................................................................................................................. 599
3.22.16 3915 ............................................................................................................................................. 600
3.22.17 3916 ............................................................................................................................................. 600
3.22.18 3917 ............................................................................................................................................. 600
3.22.19 3918 ............................................................................................................................................. 601
3.22.20 3919 ............................................................................................................................................. 601
3.22.21 3920 ............................................................................................................................................. 601
3.22.22 3921 ............................................................................................................................................. 602
3.22.23 3922 ............................................................................................................................................. 602
3.22.24 3923 ............................................................................................................................................. 602
3.22.25 3924 ............................................................................................................................................. 603
3.22.26 3925 ............................................................................................................................................. 603

28 www.honeywell.com
 CONTENTS

3.22.27 3926 ............................................................................................................................................. 603

3.22.28 3927 ............................................................................................................................................. 604
3.22.29 3928 ............................................................................................................................................. 604
3.22.30 3929 ............................................................................................................................................. 604
3.22.31 3930 ............................................................................................................................................. 605
3.22.32 3931 ............................................................................................................................................. 605
3.22.33 3932 ............................................................................................................................................. 605
3.22.34 3933 ............................................................................................................................................. 606
3.22.35 3934 ............................................................................................................................................. 606
3.22.36 3935 ............................................................................................................................................. 606
3.22.37 3936 ............................................................................................................................................. 607
3.22.38 3937 ............................................................................................................................................. 607
3.22.39 3938 ............................................................................................................................................. 607
3.22.40 3939 ............................................................................................................................................. 608
3.22.41 3940 ............................................................................................................................................. 608
3.22.42 3941 ............................................................................................................................................. 608
3.22.43 3942 ............................................................................................................................................. 609
3.22.44 3943 ............................................................................................................................................. 609
3.22.45 3944 ............................................................................................................................................. 609
3.22.46 3945 ............................................................................................................................................. 610
3.22.47 3946 ............................................................................................................................................. 610
3.22.48 3947 ............................................................................................................................................. 610
3.22.49 3948 ............................................................................................................................................. 611
3.22.50 3949 ............................................................................................................................................. 611
3.22.51 3950 ............................................................................................................................................. 611
3.22.52 3951 ............................................................................................................................................. 612
3.22.53 3952 ............................................................................................................................................. 612
3.22.54 3953 ............................................................................................................................................. 612
3.22.55 3954 ............................................................................................................................................. 613
3.22.56 3955 ............................................................................................................................................. 613
3.23 Codes 5001 to 5099 ...................................................................................................................................... 614
3.23.1 5001 ............................................................................................................................................... 616
3.23.2 5002 ............................................................................................................................................... 616
3.23.3 5003 ............................................................................................................................................... 616
3.23.4 5004 ............................................................................................................................................... 617
3.23.5 5005 ............................................................................................................................................... 617
3.23.6 5006 ............................................................................................................................................... 617
3.23.7 5012 ............................................................................................................................................... 618
3.23.8 5013 ............................................................................................................................................... 618
3.23.9 5014 ............................................................................................................................................... 618
3.23.10 5015 ............................................................................................................................................. 619
3.23.11 5016 ............................................................................................................................................. 619
3.23.12 5017 ............................................................................................................................................. 619
3.23.13 5018 ............................................................................................................................................. 620
3.23.14 5019 ............................................................................................................................................. 620
3.23.15 5020 ............................................................................................................................................. 620
3.23.16 5021 ............................................................................................................................................. 621
3.23.17 5022 ............................................................................................................................................. 621
3.23.18 5023 ............................................................................................................................................. 621
3.23.19 5024 ............................................................................................................................................. 622
3.23.20 5025 ............................................................................................................................................. 622
3.23.21 5026 ............................................................................................................................................. 622
3.23.22 5027 ............................................................................................................................................. 623
3.23.23 5028 ............................................................................................................................................. 623

29
CONTENTS

3.23.24 5029 ............................................................................................................................................. 623

3.23.25 5030 ............................................................................................................................................. 624
3.23.26 5031 ............................................................................................................................................. 624
3.23.27 5032 ............................................................................................................................................. 624
3.23.28 5033 ............................................................................................................................................. 625
3.23.29 5034 ............................................................................................................................................. 625
3.23.30 5035 ............................................................................................................................................. 625
3.23.31 5036 ............................................................................................................................................. 626
3.23.32 5037 ............................................................................................................................................. 626
3.23.33 5038 ............................................................................................................................................. 626
3.23.34 5039 ............................................................................................................................................. 627
3.23.35 5040 ............................................................................................................................................. 627
3.23.36 5041 ............................................................................................................................................. 627
3.23.37 5042 ............................................................................................................................................. 628
3.23.38 5043 ............................................................................................................................................. 628
3.23.39 5044 ............................................................................................................................................. 628
3.23.40 5045 ............................................................................................................................................. 629
3.23.41 5046 ............................................................................................................................................. 629
3.23.42 5047 ............................................................................................................................................. 629
3.23.43 5048 ............................................................................................................................................. 630
3.23.44 5049 ............................................................................................................................................. 630
3.23.45 5050 ............................................................................................................................................. 630
3.23.46 5051 ............................................................................................................................................. 631
3.23.47 5052 ............................................................................................................................................. 631
3.23.48 5053 ............................................................................................................................................. 631
3.23.49 5054 ............................................................................................................................................. 632
3.23.50 5055 ............................................................................................................................................. 632
3.23.51 5056 ............................................................................................................................................. 632
3.23.52 5057 ............................................................................................................................................. 633
3.23.53 5058 ............................................................................................................................................. 633
3.23.54 5059 ............................................................................................................................................. 633
3.23.55 5060 ............................................................................................................................................. 634
3.23.56 5061 ............................................................................................................................................. 634
3.23.57 5062 ............................................................................................................................................. 634
3.23.58 5063 ............................................................................................................................................. 635
3.23.59 5064 ............................................................................................................................................. 635
3.23.60 5065 ............................................................................................................................................. 635
3.23.61 5066 ............................................................................................................................................. 636
3.23.62 5067 ............................................................................................................................................. 636
3.23.63 5068 ............................................................................................................................................. 636
3.23.64 5069 ............................................................................................................................................. 637
3.23.65 5070 ............................................................................................................................................. 637
3.23.66 5071 ............................................................................................................................................. 637
3.23.67 5072 ............................................................................................................................................. 638
3.23.68 5073 ............................................................................................................................................. 638
3.23.69 5074 ............................................................................................................................................. 638
3.23.70 5075 ............................................................................................................................................. 639
3.23.71 5076 ............................................................................................................................................. 639
3.23.72 5077 ............................................................................................................................................. 639
3.23.73 5078 ............................................................................................................................................. 640
3.23.74 5079 ............................................................................................................................................. 640
3.23.75 5080 ............................................................................................................................................. 640
3.23.76 5081 ............................................................................................................................................. 641
3.23.77 5082 ............................................................................................................................................. 641

30 www.honeywell.com
 CONTENTS

3.23.78 5083 ............................................................................................................................................. 641

3.23.79 5084 ............................................................................................................................................. 642
3.23.80 5085 ............................................................................................................................................. 642
3.23.81 5086 ............................................................................................................................................. 642
3.23.82 5087 ............................................................................................................................................. 643
3.23.83 5088 ............................................................................................................................................. 643
3.23.84 5089 ............................................................................................................................................. 643
3.23.85 5090 ............................................................................................................................................. 644
3.23.86 5091 ............................................................................................................................................. 644
3.23.87 5092 ............................................................................................................................................. 644
3.23.88 5093 ............................................................................................................................................. 645
3.23.89 5094 ............................................................................................................................................. 645
3.23.90 5095 ............................................................................................................................................. 645
3.23.91 5096 ............................................................................................................................................. 646
3.23.92 5097 ............................................................................................................................................. 646
3.23.93 5098 ............................................................................................................................................. 646
3.23.94 5099 ............................................................................................................................................. 647
3.24 Codes 5100 to 5197 ...................................................................................................................................... 648
3.24.1 5100 ............................................................................................................................................... 649
3.24.2 5101 ............................................................................................................................................... 650
3.24.3 5102 ............................................................................................................................................... 650
3.24.4 5103 ............................................................................................................................................... 650
3.24.5 5104 ............................................................................................................................................... 651
3.24.6 5105 ............................................................................................................................................... 651
3.24.7 5106 ............................................................................................................................................... 651
3.24.8 5107 ............................................................................................................................................... 652
3.24.9 5108 ............................................................................................................................................... 652
3.24.10 5109 ............................................................................................................................................. 652
3.24.11 5110 .............................................................................................................................................. 653
3.24.12 5111 .............................................................................................................................................. 653
3.24.13 5112 ............................................................................................................................................. 653
3.24.14 5113 ............................................................................................................................................. 654
3.24.15 5114 ............................................................................................................................................. 654
3.24.16 5115 ............................................................................................................................................. 654
3.24.17 5116 ............................................................................................................................................. 655
3.24.18 5117 ............................................................................................................................................. 655
3.24.19 5118 ............................................................................................................................................. 655
3.24.20 5119 ............................................................................................................................................. 656
3.24.21 5120 ............................................................................................................................................. 656
3.24.22 5121 ............................................................................................................................................. 656
3.24.23 5122 ............................................................................................................................................. 657
3.24.24 5123 ............................................................................................................................................. 657
3.24.25 5124 ............................................................................................................................................. 657
3.24.26 5125 ............................................................................................................................................. 658
3.24.27 5126 ............................................................................................................................................. 658
3.24.28 5127 ............................................................................................................................................. 658
3.24.29 5128 ............................................................................................................................................. 659
3.24.30 5129 ............................................................................................................................................. 659
3.24.31 5130 ............................................................................................................................................. 659
3.24.32 5131 ............................................................................................................................................. 660
3.24.33 5132 ............................................................................................................................................. 660
3.24.34 5133 ............................................................................................................................................. 660
3.24.35 5134 ............................................................................................................................................. 661
3.24.36 5135 ............................................................................................................................................. 661

31
CONTENTS

3.24.37 5136 ............................................................................................................................................. 661

3.24.38 5137 ............................................................................................................................................. 662
3.24.39 5138 ............................................................................................................................................. 662
3.24.40 5139 ............................................................................................................................................. 662
3.24.41 5140 ............................................................................................................................................. 663
3.24.42 5141 ............................................................................................................................................. 663
3.24.43 5142 ............................................................................................................................................. 663
3.24.44 5143 ............................................................................................................................................. 664
3.24.45 5144 ............................................................................................................................................. 664
3.24.46 5145 ............................................................................................................................................. 664
3.24.47 5146 ............................................................................................................................................. 665
3.24.48 5147 ............................................................................................................................................. 665
3.24.49 5148 ............................................................................................................................................. 665
3.24.50 5149 ............................................................................................................................................. 666
3.24.51 5150 ............................................................................................................................................. 666
3.24.52 5151 ............................................................................................................................................. 666
3.24.53 5152 ............................................................................................................................................. 667
3.24.54 5153 ............................................................................................................................................. 667
3.24.55 5154 ............................................................................................................................................. 667
3.24.56 5155 ............................................................................................................................................. 668
3.24.57 5156 ............................................................................................................................................. 668
3.24.58 5157 ............................................................................................................................................. 668
3.24.59 5158 ............................................................................................................................................. 669
3.24.60 5159 ............................................................................................................................................. 669
3.24.61 5160 ............................................................................................................................................. 669
3.24.62 5161 ............................................................................................................................................. 670
3.24.63 5162 ............................................................................................................................................. 670
3.24.64 5168 ............................................................................................................................................. 670
3.24.65 5169 ............................................................................................................................................. 671
3.24.66 5170 ............................................................................................................................................. 671
3.24.67 5171 ............................................................................................................................................. 671
3.24.68 5172 ............................................................................................................................................. 672
3.24.69 5173 ............................................................................................................................................. 672
3.24.70 5174 ............................................................................................................................................. 672
3.24.71 5175 ............................................................................................................................................. 673
3.24.72 5176 ............................................................................................................................................. 673
3.24.73 5177 ............................................................................................................................................. 673
3.24.74 5197 ............................................................................................................................................. 674
3.25 Codes 5201 to 5215 ...................................................................................................................................... 675
3.25.1 5201 ............................................................................................................................................... 675
3.25.2 5202 ............................................................................................................................................... 675
3.25.3 5203 ............................................................................................................................................... 676
3.25.4 5204 ............................................................................................................................................... 676
3.25.5 5205 ............................................................................................................................................... 676
3.25.6 5206 ............................................................................................................................................... 677
3.25.7 5207 ............................................................................................................................................... 677
3.25.8 5208 ............................................................................................................................................... 677
3.25.9 5209 ............................................................................................................................................... 678
3.25.10 5210 ............................................................................................................................................. 678
3.25.11 5211 .............................................................................................................................................. 678
3.25.12 5212 ............................................................................................................................................. 679
3.25.13 5213 ............................................................................................................................................. 679
3.25.14 5214 ............................................................................................................................................. 679
3.25.15 5215 ............................................................................................................................................. 680

32 www.honeywell.com
 CONTENTS

3.26 Codes 5300 to 5341 ...................................................................................................................................... 681

3.26.1 5300 ............................................................................................................................................... 682
3.26.2 5301 ............................................................................................................................................... 682
3.26.3 5302 ............................................................................................................................................... 682
3.26.4 5303 ............................................................................................................................................... 683
3.26.5 5304 ............................................................................................................................................... 683
3.26.6 5305 ............................................................................................................................................... 683
3.26.7 5306 ............................................................................................................................................... 684
3.26.8 5307 ............................................................................................................................................... 684
3.26.9 5308 ............................................................................................................................................... 684
3.26.10 5309 ............................................................................................................................................. 685
3.26.11 5310 ............................................................................................................................................. 685
3.26.12 5311 ............................................................................................................................................. 685
3.26.13 5312 ............................................................................................................................................. 686
3.26.14 5313 ............................................................................................................................................. 686
3.26.15 5314 ............................................................................................................................................. 686
3.26.16 5315 ............................................................................................................................................. 687
3.26.17 5316 ............................................................................................................................................. 687
3.26.18 5317 ............................................................................................................................................. 687
3.26.19 5318 ............................................................................................................................................. 688
3.26.20 5319 ............................................................................................................................................. 688
3.26.21 5320 ............................................................................................................................................. 688
3.26.22 5321 ............................................................................................................................................. 689
3.26.23 5322 ............................................................................................................................................. 689
3.26.24 5323 ............................................................................................................................................. 689
3.26.25 5324 ............................................................................................................................................. 690
3.26.26 5325 ............................................................................................................................................. 690
3.26.27 5326 ............................................................................................................................................. 690
3.26.28 5327 ............................................................................................................................................. 691
3.26.29 5328 ............................................................................................................................................. 691
3.26.30 5329 ............................................................................................................................................. 691
3.26.31 5330 ............................................................................................................................................. 692
3.26.32 5331 ............................................................................................................................................. 692
3.26.33 5332 ............................................................................................................................................. 692
3.26.34 5333 ............................................................................................................................................. 693
3.26.35 5334 ............................................................................................................................................. 693
3.26.36 5335 ............................................................................................................................................. 693
3.26.37 5336 ............................................................................................................................................. 694
3.26.38 5337 ............................................................................................................................................. 694
3.26.39 5338 ............................................................................................................................................. 694
3.26.40 5339 ............................................................................................................................................. 695
3.26.41 5340 ............................................................................................................................................. 695
3.26.42 5341 ............................................................................................................................................. 695
3.27 Codes 5601 to 5602 ...................................................................................................................................... 697
3.27.1 5601 ............................................................................................................................................... 697
3.27.2 5602 ............................................................................................................................................... 697
3.28 Codes 6001 to 6021 ...................................................................................................................................... 698
3.28.1 6001 ............................................................................................................................................... 698
3.28.2 6002 ............................................................................................................................................... 698
3.28.3 6003 ............................................................................................................................................... 699
3.28.4 6004 ............................................................................................................................................... 699
3.28.5 6005 ............................................................................................................................................... 700
3.28.6 6006 ............................................................................................................................................... 700
3.28.7 6007 ............................................................................................................................................... 700

33
CONTENTS

3.28.8 6008 ............................................................................................................................................... 701

3.28.9 6009 ............................................................................................................................................... 701
3.28.10 6010 ............................................................................................................................................. 701
3.28.11 6011 .............................................................................................................................................. 702
3.28.12 6012 ............................................................................................................................................. 702
3.28.13 6013 ............................................................................................................................................. 702
3.28.14 6014 ............................................................................................................................................. 703
3.28.15 6015 ............................................................................................................................................. 703
3.28.16 6016 ............................................................................................................................................. 703
3.28.17 6017 ............................................................................................................................................. 704
3.28.18 6018 ............................................................................................................................................. 704
3.28.19 6019 ............................................................................................................................................. 704
3.28.20 6020 ............................................................................................................................................. 705
3.28.21 6021 ............................................................................................................................................. 705
3.29 Codes 7001 to 7063 ...................................................................................................................................... 706
3.29.1 7001 ............................................................................................................................................... 707
3.29.2 7002 ............................................................................................................................................... 707
3.29.3 7003 ............................................................................................................................................... 708
3.29.4 7004 ............................................................................................................................................... 708
3.29.5 7005 ............................................................................................................................................... 708
3.29.6 7006 ............................................................................................................................................... 709
3.29.7 7007 ............................................................................................................................................... 709
3.29.8 7008 ............................................................................................................................................... 709
3.29.9 7009 ............................................................................................................................................... 710
3.29.10 7010 ............................................................................................................................................. 710
3.29.11 7011 .............................................................................................................................................. 710
3.29.12 7012 ............................................................................................................................................. 711
3.29.13 7013 ............................................................................................................................................. 711
3.29.14 7014 ............................................................................................................................................. 712
3.29.15 7015 ............................................................................................................................................. 712
3.29.16 7016 ............................................................................................................................................. 712
3.29.17 7017 ............................................................................................................................................. 713
3.29.18 7018 ............................................................................................................................................. 713
3.29.19 7019 ............................................................................................................................................. 713
3.29.20 7020 ............................................................................................................................................. 714
3.29.21 7021 ............................................................................................................................................. 714
3.29.22 7022 ............................................................................................................................................. 714
3.29.23 7023 ............................................................................................................................................. 715
3.29.24 7024 ............................................................................................................................................. 715
3.29.25 7025 ............................................................................................................................................. 715
3.29.26 7026 ............................................................................................................................................. 716
3.29.27 7027 ............................................................................................................................................. 716
3.29.28 7028 ............................................................................................................................................. 716
3.29.29 7029 ............................................................................................................................................. 717
3.29.30 7030 ............................................................................................................................................. 717
3.29.31 7031 ............................................................................................................................................. 717
3.29.32 7032 ............................................................................................................................................. 718
3.29.33 7033 ............................................................................................................................................. 718
3.29.34 7034 ............................................................................................................................................. 718
3.29.35 7035 ............................................................................................................................................. 719
3.29.36 7036 ............................................................................................................................................. 719
3.29.37 7037 ............................................................................................................................................. 719
3.29.38 7038 ............................................................................................................................................. 720
3.29.39 7039 ............................................................................................................................................. 720

34 www.honeywell.com
 CONTENTS

3.29.40 7040 ............................................................................................................................................. 720

3.29.41 7041 ............................................................................................................................................. 721
3.29.42 7042 ............................................................................................................................................. 721
3.29.43 7043 ............................................................................................................................................. 721
3.29.44 7044 ............................................................................................................................................. 722
3.29.45 7045 ............................................................................................................................................. 722
3.29.46 7046 ............................................................................................................................................. 722
3.29.47 7047 ............................................................................................................................................. 723
3.29.48 7048 ............................................................................................................................................. 723
3.29.49 7049 ............................................................................................................................................. 724
3.29.50 7050 ............................................................................................................................................. 724
3.29.51 7051 ............................................................................................................................................. 724
3.29.52 7052 ............................................................................................................................................. 725
3.29.53 7053 ............................................................................................................................................. 725
3.29.54 7054 ............................................................................................................................................. 725
3.29.55 7055 ............................................................................................................................................. 726
3.29.56 7056 ............................................................................................................................................. 726
3.29.57 7057 ............................................................................................................................................. 726
3.29.58 7058 ............................................................................................................................................. 727
3.29.59 7060 ............................................................................................................................................. 727
3.29.60 7061 ............................................................................................................................................. 727
3.29.61 7062 ............................................................................................................................................. 728
3.29.62 7063 ............................................................................................................................................. 728
3.30 Codes 8001 to 8066 ...................................................................................................................................... 729
3.30.1 8001 ............................................................................................................................................... 730
3.30.2 8002 ............................................................................................................................................... 730
3.30.3 8003 ............................................................................................................................................... 730
3.30.4 8004 ............................................................................................................................................... 731
3.30.5 8005 ............................................................................................................................................... 731
3.30.6 8006 ............................................................................................................................................... 732
3.30.7 8008 ............................................................................................................................................... 732
3.30.8 8009 ............................................................................................................................................... 732
3.30.9 8010 ............................................................................................................................................... 733
3.30.10 8011 ............................................................................................................................................. 733
3.30.11 8012 ............................................................................................................................................. 733
3.30.12 8013 ............................................................................................................................................. 734
3.30.13 8014 ............................................................................................................................................. 734
3.30.14 8015 ............................................................................................................................................. 734
3.30.15 8016 ............................................................................................................................................. 735
3.30.16 8017 ............................................................................................................................................. 735
3.30.17 8018 ............................................................................................................................................. 735
3.30.18 8019 ............................................................................................................................................. 736
3.30.19 8020 ............................................................................................................................................. 736
3.30.20 8021 ............................................................................................................................................. 737
3.30.21 8030 ............................................................................................................................................. 737
3.30.22 8031 ............................................................................................................................................. 737
3.30.23 8032 ............................................................................................................................................. 738
3.30.24 8034 ............................................................................................................................................. 738
3.30.25 8035 ............................................................................................................................................. 738
3.30.26 8036 ............................................................................................................................................. 739
3.30.27 8037 ............................................................................................................................................. 739
3.30.28 8038 ............................................................................................................................................. 739
3.30.29 8039 ............................................................................................................................................. 740
3.30.30 8040 ............................................................................................................................................. 740

35
CONTENTS

3.30.31 8041 ............................................................................................................................................. 740

3.30.32 8042 ............................................................................................................................................. 741
3.30.33 8043 ............................................................................................................................................. 741
3.30.34 8044 ............................................................................................................................................. 741
3.30.35 8045 ............................................................................................................................................. 742
3.30.36 8046 ............................................................................................................................................. 742
3.30.37 8047 ............................................................................................................................................. 742
3.30.38 8048 ............................................................................................................................................. 743
3.30.39 8049 ............................................................................................................................................. 743
3.30.40 8050 ............................................................................................................................................. 743
3.30.41 8051 ............................................................................................................................................. 744
3.30.42 8052 ............................................................................................................................................. 744
3.30.43 8053 ............................................................................................................................................. 744
3.30.44 8054 ............................................................................................................................................. 745
3.30.45 8055 ............................................................................................................................................. 745
3.30.46 8060 ............................................................................................................................................. 745
3.30.47 8061 ............................................................................................................................................. 746
3.30.48 8062 ............................................................................................................................................. 746
3.30.49 8063 ............................................................................................................................................. 746
3.30.50 8064 ............................................................................................................................................. 747
3.30.51 8065 ............................................................................................................................................. 747
3.30.52 8066 ............................................................................................................................................. 747
3.31 Codes 8501 to 8511 ...................................................................................................................................... 749
3.31.1 8501 ............................................................................................................................................... 749
3.31.2 8502 ............................................................................................................................................... 749
3.31.3 8503 ............................................................................................................................................... 750
3.31.4 8504 ............................................................................................................................................... 750
3.31.5 8505 ............................................................................................................................................... 750
3.31.6 8506 ............................................................................................................................................... 751
3.31.7 8508 ............................................................................................................................................... 751
3.31.8 8509 ............................................................................................................................................... 751
3.31.9 8510 ............................................................................................................................................... 752
3.31.10 8511 ............................................................................................................................................. 752
3.32 Codes 9001 to 9099 ...................................................................................................................................... 753
3.32.1 9001 ............................................................................................................................................... 754
3.32.2 9002 ............................................................................................................................................... 754
3.32.3 9003 ............................................................................................................................................... 755
3.32.4 9004 ............................................................................................................................................... 755
3.32.5 9005 ............................................................................................................................................... 755
3.32.6 9006 ............................................................................................................................................... 756
3.32.7 9007 ............................................................................................................................................... 756
3.32.8 9010 ............................................................................................................................................... 756
3.32.9 9011 ............................................................................................................................................... 757
3.32.10 9012 ............................................................................................................................................. 757
3.32.11 9013 ............................................................................................................................................. 757
3.32.12 9014 ............................................................................................................................................. 758
3.32.13 9015 ............................................................................................................................................. 758
3.32.14 9016 ............................................................................................................................................. 758
3.32.15 9017 ............................................................................................................................................. 759
3.32.16 9018 ............................................................................................................................................. 759
3.32.17 9019 ............................................................................................................................................. 759
3.32.18 9020 ............................................................................................................................................. 760
3.32.19 9021 ............................................................................................................................................. 760
3.32.20 9022 ............................................................................................................................................. 760

36 www.honeywell.com
 CONTENTS

3.32.21 9023 ............................................................................................................................................. 761

3.32.22 9024 ............................................................................................................................................. 761
3.32.23 9025 ............................................................................................................................................. 761
3.32.24 9050 ............................................................................................................................................. 762
3.32.25 9051 ............................................................................................................................................. 762
3.32.26 9052 ............................................................................................................................................. 763
3.32.27 9053 ............................................................................................................................................. 763
3.32.28 9054 ............................................................................................................................................. 763
3.32.29 9055 ............................................................................................................................................. 764
3.32.30 9056 ............................................................................................................................................. 764
3.32.31 9057 ............................................................................................................................................. 764
3.32.32 9058 ............................................................................................................................................. 765
3.32.33 9059 ............................................................................................................................................. 765
3.32.34 9060 ............................................................................................................................................. 765
3.32.35 9061 ............................................................................................................................................. 766
3.32.36 9062 ............................................................................................................................................. 766
3.32.37 9063 ............................................................................................................................................. 766
3.32.38 9064 ............................................................................................................................................. 767
3.32.39 9065 ............................................................................................................................................. 767
3.32.40 9066 ............................................................................................................................................. 767
3.32.41 9067 ............................................................................................................................................. 768
3.32.42 9068 ............................................................................................................................................. 768
3.32.43 9069 ............................................................................................................................................. 769
3.32.44 9070 ............................................................................................................................................. 769
3.32.45 9071 ............................................................................................................................................. 769
3.32.46 9072 ............................................................................................................................................. 770
3.32.47 9073 ............................................................................................................................................. 770
3.32.48 9074 ............................................................................................................................................. 770
3.32.49 9075 ............................................................................................................................................. 771
3.32.50 9076 ............................................................................................................................................. 771
3.32.51 9077 ............................................................................................................................................. 771
3.32.52 9078 ............................................................................................................................................. 772
3.32.53 9079 ............................................................................................................................................. 772
3.32.54 9080 ............................................................................................................................................. 772
3.32.55 9081 ............................................................................................................................................. 773
3.32.56 9082 ............................................................................................................................................. 773
3.32.57 9083 ............................................................................................................................................. 773
3.32.58 9084 ............................................................................................................................................. 774
3.32.59 9085 ............................................................................................................................................. 774
3.32.60 9086 ............................................................................................................................................. 774
3.32.61 9087 ............................................................................................................................................. 775
3.32.62 9088 ............................................................................................................................................. 775
3.32.63 9089 ............................................................................................................................................. 775
3.32.64 9090 ............................................................................................................................................. 776
3.32.65 9091 ............................................................................................................................................. 776
3.32.66 9092 ............................................................................................................................................. 776
3.32.67 9093 ............................................................................................................................................. 777
3.32.68 9094 ............................................................................................................................................. 777
3.32.69 9095 ............................................................................................................................................. 777
3.32.70 9096 ............................................................................................................................................. 778
3.32.71 9097 ............................................................................................................................................. 778
3.32.72 9098 ............................................................................................................................................. 778
3.32.73 9099 ............................................................................................................................................. 779
3.33 Codes 9100 to 9178 ...................................................................................................................................... 780

37
CONTENTS

3.33.1 9100 ............................................................................................................................................... 781

3.33.2 9101 ............................................................................................................................................... 781
3.33.3 9102 ............................................................................................................................................... 781
3.33.4 9103 ............................................................................................................................................... 782
3.33.5 9104 ............................................................................................................................................... 782
3.33.6 9105 ............................................................................................................................................... 783
3.33.7 9106 ............................................................................................................................................... 783
3.33.8 9107 ............................................................................................................................................... 783
3.33.9 9108 ............................................................................................................................................... 784
3.33.10 9109 ............................................................................................................................................. 784
3.33.11 9110 .............................................................................................................................................. 784
3.33.12 9111 .............................................................................................................................................. 785
3.33.13 9112 ............................................................................................................................................. 785
3.33.14 9113 ............................................................................................................................................. 785
3.33.15 9114 ............................................................................................................................................. 786
3.33.16 9116 ............................................................................................................................................. 786
3.33.17 9117 ............................................................................................................................................. 786
3.33.18 9118 ............................................................................................................................................. 787
3.33.19 9119 ............................................................................................................................................. 787
3.33.20 9121 ............................................................................................................................................. 788
3.33.21 9122 ............................................................................................................................................. 788
3.33.22 9134 ............................................................................................................................................. 788
3.33.23 9136 ............................................................................................................................................. 789
3.33.24 9137 ............................................................................................................................................. 789
3.33.25 9138 ............................................................................................................................................. 789
3.33.26 9139 ............................................................................................................................................. 790
3.33.27 9140 ............................................................................................................................................. 790
3.33.28 9141 ............................................................................................................................................. 790
3.33.29 9142 ............................................................................................................................................. 791
3.33.30 9143 ............................................................................................................................................. 791
3.33.31 9144 ............................................................................................................................................. 791
3.33.32 9145 ............................................................................................................................................. 792
3.33.33 9146 ............................................................................................................................................. 792
3.33.34 9147 ............................................................................................................................................. 792
3.33.35 9148 ............................................................................................................................................. 793
3.33.36 9149 ............................................................................................................................................. 793
3.33.37 9150 ............................................................................................................................................. 793
3.33.38 9151 ............................................................................................................................................. 794
3.33.39 9152 ............................................................................................................................................. 794
3.33.40 9153 ............................................................................................................................................. 794
3.33.41 9154 ............................................................................................................................................. 795
3.33.42 9155 ............................................................................................................................................. 795
3.33.43 9156 ............................................................................................................................................. 795
3.33.44 9157 ............................................................................................................................................. 796
3.33.45 9161 ............................................................................................................................................. 796
3.33.46 9170 ............................................................................................................................................. 796
3.33.47 9177 ............................................................................................................................................. 797
3.33.48 9178 ............................................................................................................................................. 797
3.34 Codes 9181 to 9297 ...................................................................................................................................... 798
3.34.1 9181 ............................................................................................................................................... 799
3.34.2 9182 ............................................................................................................................................... 800
3.34.3 9183 ............................................................................................................................................... 800
3.34.4 9184 ............................................................................................................................................... 801
3.34.5 9185 ............................................................................................................................................... 801

38 www.honeywell.com
 CONTENTS

3.34.6 9186 ............................................................................................................................................... 802

3.34.7 9187 ............................................................................................................................................... 802
3.34.8 9188 ............................................................................................................................................... 803
3.34.9 9189 ............................................................................................................................................... 804
3.34.10 9190 ............................................................................................................................................. 804
3.34.11 9191 ............................................................................................................................................. 804
3.34.12 9192 ............................................................................................................................................. 805
3.34.13 9193 ............................................................................................................................................. 805
3.34.14 9194 ............................................................................................................................................. 806
3.34.15 9195 ............................................................................................................................................. 807
3.34.16 9196 ............................................................................................................................................. 807
3.34.17 9197 ............................................................................................................................................. 807
3.34.18 9198 ............................................................................................................................................. 808
3.34.19 9199 ............................................................................................................................................. 808
3.34.20 9201 ............................................................................................................................................. 808
3.34.21 9202 ............................................................................................................................................. 809
3.34.22 9203 ............................................................................................................................................. 809
3.34.23 9204 ............................................................................................................................................. 809
3.34.24 9205 ............................................................................................................................................. 810
3.34.25 9206 ............................................................................................................................................. 810
3.34.26 9207 ............................................................................................................................................. 810
3.34.27 9208 ............................................................................................................................................. 811
3.34.28 9209 ............................................................................................................................................. 811
3.34.29 9210 ............................................................................................................................................. 811
3.34.30 9211 ............................................................................................................................................. 812
3.34.31 9212 ............................................................................................................................................. 812
3.34.32 9213 ............................................................................................................................................. 812
3.34.33 9214 ............................................................................................................................................. 813
3.34.34 9217 ............................................................................................................................................. 813
3.34.35 9218 ............................................................................................................................................. 813
3.34.36 9223 ............................................................................................................................................. 814
3.34.37 9224 ............................................................................................................................................. 814
3.34.38 9225 ............................................................................................................................................. 814
3.34.39 9226 ............................................................................................................................................. 815
3.34.40 9227 ............................................................................................................................................. 815
3.34.41 9251 ............................................................................................................................................. 816
3.34.42 9252 ............................................................................................................................................. 816
3.34.43 9253 ............................................................................................................................................. 816
3.34.44 9254 ............................................................................................................................................. 817
3.34.45 9255 ............................................................................................................................................. 817
3.34.46 9256 ............................................................................................................................................. 817
3.34.47 9257 ............................................................................................................................................. 818
3.34.48 9258 ............................................................................................................................................. 818
3.34.49 9259 ............................................................................................................................................. 818
3.34.50 9260 ............................................................................................................................................. 819
3.34.51 9275 ............................................................................................................................................. 819
3.34.52 9276 ............................................................................................................................................. 819
3.34.53 9278 ............................................................................................................................................. 820
3.34.54 9279 ............................................................................................................................................. 820
3.34.55 9280 ............................................................................................................................................. 821
3.34.56 9281 ............................................................................................................................................. 821
3.34.57 9282 ............................................................................................................................................. 821
3.34.58 9283 ............................................................................................................................................. 822
3.34.59 9284 ............................................................................................................................................. 822

39
CONTENTS

3.34.60 9285 ............................................................................................................................................. 822

3.34.61 9286 ............................................................................................................................................. 823
3.34.62 9287 ............................................................................................................................................. 823
3.34.63 9288 ............................................................................................................................................. 824
3.34.64 9289 ............................................................................................................................................. 824
3.34.65 9290 ............................................................................................................................................. 824
3.34.66 9291 ............................................................................................................................................. 825
3.34.67 9292 ............................................................................................................................................. 825
3.34.68 9293 ............................................................................................................................................. 825
3.34.69 9294 ............................................................................................................................................. 826
3.34.70 9295 ............................................................................................................................................. 826
3.34.71 9296 ............................................................................................................................................. 826
3.34.72 9297 ............................................................................................................................................. 827
3.35 Codes 9300 to 9452 ...................................................................................................................................... 828
3.35.1 9300 ............................................................................................................................................... 830
3.35.2 9301 ............................................................................................................................................... 830
3.35.3 9302 ............................................................................................................................................... 831
3.35.4 9303 ............................................................................................................................................... 832
3.35.5 9304 ............................................................................................................................................... 832
3.35.6 9305 ............................................................................................................................................... 832
3.35.7 9306 ............................................................................................................................................... 833
3.35.8 9307 ............................................................................................................................................... 833
3.35.9 9308 ............................................................................................................................................... 833
3.35.10 9310 ............................................................................................................................................. 834
3.35.11 9311 .............................................................................................................................................. 834
3.35.12 9312 ............................................................................................................................................. 834
3.35.13 9313 ............................................................................................................................................. 835
3.35.14 9314 ............................................................................................................................................. 835
3.35.15 9315 ............................................................................................................................................. 835
3.35.16 9316 ............................................................................................................................................. 836
3.35.17 9317 ............................................................................................................................................. 836
3.35.18 9318 ............................................................................................................................................. 836
3.35.19 9319 ............................................................................................................................................. 837
3.35.20 9320 ............................................................................................................................................. 837
3.35.21 9321 ............................................................................................................................................. 838
3.35.22 9322 ............................................................................................................................................. 838
3.35.23 9323 ............................................................................................................................................. 838
3.35.24 9324 ............................................................................................................................................. 839
3.35.25 9325 ............................................................................................................................................. 839
3.35.26 9326 ............................................................................................................................................. 839
3.35.27 9327 ............................................................................................................................................. 840
3.35.28 9329 ............................................................................................................................................. 840
3.35.29 9330 ............................................................................................................................................. 840
3.35.30 9331 ............................................................................................................................................. 841
3.35.31 9340 ............................................................................................................................................. 841
3.35.32 9341 ............................................................................................................................................. 841
3.35.33 9342 ............................................................................................................................................. 842
3.35.34 9343 ............................................................................................................................................. 842
3.35.35 9344 ............................................................................................................................................. 842
3.35.36 9345 ............................................................................................................................................. 843
3.35.37 9346 ............................................................................................................................................. 843
3.35.38 9347 ............................................................................................................................................. 843
3.35.39 9348 ............................................................................................................................................. 844
3.35.40 9349 ............................................................................................................................................. 844

40 www.honeywell.com
 CONTENTS

3.35.41 9350 ............................................................................................................................................. 844

3.35.42 9351 ............................................................................................................................................. 845
3.35.43 9352 ............................................................................................................................................. 845
3.35.44 9353 ............................................................................................................................................. 845
3.35.45 9356 ............................................................................................................................................. 846
3.35.46 9357 ............................................................................................................................................. 846
3.35.47 9358 ............................................................................................................................................. 846
3.35.48 9359 ............................................................................................................................................. 847
3.35.49 9360 ............................................................................................................................................. 847
3.35.50 9361 ............................................................................................................................................. 848
3.35.51 9362 ............................................................................................................................................. 848
3.35.52 9363 ............................................................................................................................................. 848
3.35.53 9364 ............................................................................................................................................. 849
3.35.54 9365 ............................................................................................................................................. 849
3.35.55 9366 ............................................................................................................................................. 849
3.35.56 9367 ............................................................................................................................................. 850
3.35.57 9368 ............................................................................................................................................. 850
3.35.58 9369 ............................................................................................................................................. 851
3.35.59 9370 ............................................................................................................................................. 851
3.35.60 9371 ............................................................................................................................................. 851
3.35.61 9372 ............................................................................................................................................. 852
3.35.62 9373 ............................................................................................................................................. 852
3.35.63 9374 ............................................................................................................................................. 852
3.35.64 9375 ............................................................................................................................................. 853
3.35.65 9376 ............................................................................................................................................. 853
3.35.66 9377 ............................................................................................................................................. 854
3.35.67 9378 ............................................................................................................................................. 854
3.35.68 9379 ............................................................................................................................................. 854
3.35.69 9380 ............................................................................................................................................. 855
3.35.70 9381 ............................................................................................................................................. 855
3.35.71 9382 ............................................................................................................................................. 855
3.35.72 9383 ............................................................................................................................................. 856
3.35.73 9384 ............................................................................................................................................. 856
3.35.74 9385 ............................................................................................................................................. 856
3.35.75 9386 ............................................................................................................................................. 857
3.35.76 9387 ............................................................................................................................................. 858
3.35.77 9388 ............................................................................................................................................. 858
3.35.78 9389 ............................................................................................................................................. 858
3.35.79 9390 ............................................................................................................................................. 859
3.35.80 9391 ............................................................................................................................................. 859
3.35.81 9392 ............................................................................................................................................. 859
3.35.82 9393 ............................................................................................................................................. 860
3.35.83 9394 ............................................................................................................................................. 860
3.35.84 9395 ............................................................................................................................................. 860
3.35.85 9396 ............................................................................................................................................. 861
3.35.86 9397 ............................................................................................................................................. 861
3.35.87 9398 ............................................................................................................................................. 861
3.35.88 9406 ............................................................................................................................................. 862
3.35.89 9407 ............................................................................................................................................. 862
3.35.90 9408 ............................................................................................................................................. 863
3.35.91 9421 ............................................................................................................................................. 863
3.35.92 9422 ............................................................................................................................................. 863
3.35.93 9423 ............................................................................................................................................. 864
3.35.94 9424 ............................................................................................................................................. 864

41
CONTENTS

3.35.95 9425 ............................................................................................................................................. 864

3.35.96 9426 ............................................................................................................................................. 865
3.35.97 9427 ............................................................................................................................................. 865
3.35.98 9428 ............................................................................................................................................. 865
3.35.99 9429 ............................................................................................................................................. 866
3.35.100 9430 ........................................................................................................................................... 866
3.35.101 9441 ........................................................................................................................................... 867
3.35.102 9442 ........................................................................................................................................... 867
3.35.103 9443 ........................................................................................................................................... 867
3.35.104 9452 ........................................................................................................................................... 868
3.36 Codes 9471 to 9523 ...................................................................................................................................... 869
3.36.1 9471 ............................................................................................................................................... 869
3.36.2 9472 ............................................................................................................................................... 870
3.36.3 9481 ............................................................................................................................................... 870
3.36.4 9482 ............................................................................................................................................... 870
3.36.5 9483 ............................................................................................................................................... 871
3.36.6 9484 ............................................................................................................................................... 871
3.36.7 9485 ............................................................................................................................................... 871
3.36.8 9486 ............................................................................................................................................... 872
3.36.9 9487 ............................................................................................................................................... 872
3.36.10 9488 ............................................................................................................................................. 873
3.36.11 9489 ............................................................................................................................................. 873
3.36.12 9490 ............................................................................................................................................. 873
3.36.13 9491 ............................................................................................................................................. 874
3.36.14 9492 ............................................................................................................................................. 874
3.36.15 9493 ............................................................................................................................................. 874
3.36.16 9494 ............................................................................................................................................. 875
3.36.17 9495 ............................................................................................................................................. 875
3.36.18 9496 ............................................................................................................................................. 876
3.36.19 9497 ............................................................................................................................................. 876
3.36.20 9498 ............................................................................................................................................. 876
3.36.21 9522 ............................................................................................................................................. 877
3.36.22 9523 ............................................................................................................................................. 877
3.37 Codes 9501 to 9521 ...................................................................................................................................... 878
3.37.1 9501 ............................................................................................................................................... 878
3.37.2 9502 ............................................................................................................................................... 878
3.37.3 9503 ............................................................................................................................................... 879
3.37.4 9504 ............................................................................................................................................... 879
3.37.5 9505 ............................................................................................................................................... 879
3.37.6 9506 ............................................................................................................................................... 880
3.37.7 9507 ............................................................................................................................................... 880
3.37.8 9508 ............................................................................................................................................... 880
3.37.9 9521 ............................................................................................................................................... 881
3.38 Codes 9525 to 9550 ...................................................................................................................................... 882
3.38.1 9525 ............................................................................................................................................... 882
3.38.2 9526 ............................................................................................................................................... 882
3.38.3 9527 ............................................................................................................................................... 883
3.38.4 9528 ............................................................................................................................................... 883
3.38.5 9529 ............................................................................................................................................... 883
3.38.6 9530 ............................................................................................................................................... 884
3.38.7 9531 ............................................................................................................................................... 884
3.38.8 9532 ............................................................................................................................................... 884
3.38.9 9533 ............................................................................................................................................... 885
3.38.10 9534 ............................................................................................................................................. 885

42 www.honeywell.com
 CONTENTS

3.38.11 9535 ............................................................................................................................................. 885

3.38.12 9536 ............................................................................................................................................. 886
3.38.13 9537 ............................................................................................................................................. 886
3.38.14 9538 ............................................................................................................................................. 886
3.38.15 9539 ............................................................................................................................................. 887
3.38.16 9540 ............................................................................................................................................. 887
3.39 Codes 10001 to 10093 .................................................................................................................................. 888
3.39.1 10001 ............................................................................................................................................. 889
3.39.2 10002 ............................................................................................................................................. 890
3.39.3 10003 ............................................................................................................................................. 890
3.39.4 10004 ............................................................................................................................................. 891
3.39.5 10005 ............................................................................................................................................. 891
3.39.6 10006 ............................................................................................................................................. 892
3.39.7 10007 ............................................................................................................................................. 892
3.39.8 10008 ............................................................................................................................................. 892
3.39.9 10009 ............................................................................................................................................. 893
3.39.10 10010 ........................................................................................................................................... 893
3.39.11 10011 ............................................................................................................................................ 894
3.39.12 10012 ........................................................................................................................................... 894
3.39.13 10013 ........................................................................................................................................... 894
3.39.14 10014 ........................................................................................................................................... 895
3.39.15 10015 ........................................................................................................................................... 895
3.39.16 10016 ........................................................................................................................................... 896
3.39.17 10017 ........................................................................................................................................... 896
3.39.18 10018 ........................................................................................................................................... 896
3.39.19 10019 ........................................................................................................................................... 897
3.39.20 10020 ........................................................................................................................................... 897
3.39.21 10021 ........................................................................................................................................... 897
3.39.22 10022 ........................................................................................................................................... 898
3.39.23 10023 ........................................................................................................................................... 898
3.39.24 10024 ........................................................................................................................................... 898
3.39.25 10025 ........................................................................................................................................... 899
3.39.26 10026 ........................................................................................................................................... 899
3.39.27 10027 ........................................................................................................................................... 900
3.39.28 10028 ........................................................................................................................................... 900
3.39.29 10029 ........................................................................................................................................... 900
3.39.30 10032 ........................................................................................................................................... 901
3.39.31 10033 ........................................................................................................................................... 901
3.39.32 10034 ........................................................................................................................................... 901
3.39.33 10035 ........................................................................................................................................... 902
3.39.34 10036 ........................................................................................................................................... 902
3.39.35 10037 ........................................................................................................................................... 902
3.39.36 10038 ........................................................................................................................................... 903
3.39.37 10039 ........................................................................................................................................... 903
3.39.38 10040 ........................................................................................................................................... 903
3.39.39 10041 ........................................................................................................................................... 904
3.39.40 10042 ........................................................................................................................................... 904
3.39.41 10043 ........................................................................................................................................... 904
3.39.42 10044 ........................................................................................................................................... 905
3.39.43 10045 ........................................................................................................................................... 905
3.39.44 10046 ........................................................................................................................................... 905
3.39.45 10047 ........................................................................................................................................... 906
3.39.46 10048 ........................................................................................................................................... 906
3.39.47 10049 ........................................................................................................................................... 906

43
CONTENTS

3.39.48 10050 ........................................................................................................................................... 907

3.39.49 10051 ........................................................................................................................................... 907
3.39.50 10052 ........................................................................................................................................... 907
3.39.51 10053 ........................................................................................................................................... 908
3.39.52 10054 ........................................................................................................................................... 908
3.39.53 10055 ........................................................................................................................................... 908
3.39.54 10056 ........................................................................................................................................... 909
3.39.55 10057 ........................................................................................................................................... 909
3.39.56 10058 ........................................................................................................................................... 909
3.39.57 10059 ........................................................................................................................................... 910
3.39.58 10060 ........................................................................................................................................... 910
3.39.59 10061 ........................................................................................................................................... 910
3.39.60 10062 ........................................................................................................................................... 911
3.39.61 10063 ........................................................................................................................................... 911
3.39.62 10064 ........................................................................................................................................... 911
3.39.63 10065 ........................................................................................................................................... 912
3.39.64 10066 ........................................................................................................................................... 912
3.39.65 10070 ........................................................................................................................................... 912
3.39.66 10071 ........................................................................................................................................... 913
3.39.67 10072 ........................................................................................................................................... 913
3.39.68 10073 ........................................................................................................................................... 913
3.39.69 10074 ........................................................................................................................................... 914
3.39.70 10075 ........................................................................................................................................... 914
3.39.71 10076 ........................................................................................................................................... 914
3.39.72 10077 ........................................................................................................................................... 915
3.39.73 10078 ........................................................................................................................................... 915
3.39.74 10079 ........................................................................................................................................... 915
3.39.75 10080 ........................................................................................................................................... 916
3.39.76 10081 ........................................................................................................................................... 916
3.39.77 10082 ........................................................................................................................................... 916
3.39.78 10083 ........................................................................................................................................... 917
3.39.79 10084 ........................................................................................................................................... 917
3.39.80 10085 ........................................................................................................................................... 917
3.39.81 10086 ........................................................................................................................................... 918
3.39.82 10087 ........................................................................................................................................... 918
3.39.83 10088 ........................................................................................................................................... 918
3.39.84 10089 ........................................................................................................................................... 919
3.39.85 10090 ........................................................................................................................................... 919
3.39.86 10091 ........................................................................................................................................... 920
3.39.87 10092 ........................................................................................................................................... 920
3.39.88 10093 ........................................................................................................................................... 920
3.40 Codes 10100 to 10199 .................................................................................................................................. 922
3.40.1 10100 ............................................................................................................................................. 924
3.40.2 10101 ............................................................................................................................................. 924
3.40.3 10102 ............................................................................................................................................. 924
3.40.4 10103 ............................................................................................................................................. 925
3.40.5 10104 ............................................................................................................................................. 925
3.40.6 10105 ............................................................................................................................................. 926
3.40.7 10106 ............................................................................................................................................. 926
3.40.8 10107 ............................................................................................................................................. 926
3.40.9 10108 ............................................................................................................................................. 927
3.40.10 10109 ........................................................................................................................................... 927
3.40.11 10110 ............................................................................................................................................ 928
3.40.12 10111 ............................................................................................................................................ 928

44 www.honeywell.com
 CONTENTS

3.40.13 10112 ........................................................................................................................................... 928

3.40.14 10113 ........................................................................................................................................... 929
3.40.15 10114 ........................................................................................................................................... 929
3.40.16 10115 ........................................................................................................................................... 929
3.40.17 10116 ........................................................................................................................................... 930
3.40.18 10117 ........................................................................................................................................... 930
3.40.19 10118 ........................................................................................................................................... 930
3.40.20 10119 ........................................................................................................................................... 931
3.40.21 10120 ........................................................................................................................................... 931
3.40.22 10121 ........................................................................................................................................... 931
3.40.23 10122 ........................................................................................................................................... 932
3.40.24 10123 ........................................................................................................................................... 932
3.40.25 10124 ........................................................................................................................................... 933
3.40.26 10125 ........................................................................................................................................... 933
3.40.27 10126 ........................................................................................................................................... 933
3.40.28 10127 ........................................................................................................................................... 934
3.40.29 10128 ........................................................................................................................................... 934
3.40.30 10129 ........................................................................................................................................... 934
3.40.31 10130 ........................................................................................................................................... 935
3.40.32 10131 ........................................................................................................................................... 935
3.40.33 10132 ........................................................................................................................................... 936
3.40.34 10133 ........................................................................................................................................... 936
3.40.35 10134 ........................................................................................................................................... 936
3.40.36 10135 ........................................................................................................................................... 937
3.40.37 10136 ........................................................................................................................................... 937
3.40.38 10137 ........................................................................................................................................... 937
3.40.39 10138 ........................................................................................................................................... 938
3.40.40 10139 ........................................................................................................................................... 938
3.40.41 10140 ........................................................................................................................................... 938
3.40.42 10141 ........................................................................................................................................... 939
3.40.43 10142 ........................................................................................................................................... 939
3.40.44 10143 ........................................................................................................................................... 939
3.40.45 10144 ........................................................................................................................................... 940
3.40.46 10145 ........................................................................................................................................... 940
3.40.47 10146 ........................................................................................................................................... 941
3.40.48 10147 ........................................................................................................................................... 941
3.40.49 10148 ........................................................................................................................................... 941
3.40.50 10150 ........................................................................................................................................... 942
3.40.51 10151 ........................................................................................................................................... 942
3.40.52 10152 ........................................................................................................................................... 942
3.40.53 10153 ........................................................................................................................................... 943
3.40.54 10154 ........................................................................................................................................... 943
3.40.55 10155 ........................................................................................................................................... 943
3.40.56 10156 ........................................................................................................................................... 944
3.40.57 10157 ........................................................................................................................................... 944
3.40.58 10158 ........................................................................................................................................... 944
3.40.59 10159 ........................................................................................................................................... 945
3.40.60 10160 ........................................................................................................................................... 945
3.40.61 10161 ........................................................................................................................................... 945
3.40.62 10162 ........................................................................................................................................... 946
3.40.63 10170 ........................................................................................................................................... 946
3.40.64 10171 ........................................................................................................................................... 947
3.40.65 10172 ........................................................................................................................................... 947
3.40.66 10173 ........................................................................................................................................... 947

45
CONTENTS

3.40.67 10174 ........................................................................................................................................... 948

3.40.68 10175 ........................................................................................................................................... 948
3.40.69 10176 ........................................................................................................................................... 948
3.40.70 10177 ........................................................................................................................................... 949
3.40.71 10178 ........................................................................................................................................... 949
3.40.72 10179 ........................................................................................................................................... 949
3.40.73 10180 ........................................................................................................................................... 950
3.40.74 10181 ........................................................................................................................................... 950
3.40.75 10182 ........................................................................................................................................... 951
3.40.76 10183 ........................................................................................................................................... 951
3.40.77 10184 ........................................................................................................................................... 951
3.40.78 10185 ........................................................................................................................................... 952
3.40.79 10186 ........................................................................................................................................... 952
3.40.80 10187 ........................................................................................................................................... 952
3.40.81 10188 ........................................................................................................................................... 953
3.40.82 10189 ........................................................................................................................................... 953
3.40.83 10190 ........................................................................................................................................... 953
3.40.84 10191 ........................................................................................................................................... 954
3.40.85 10192 ........................................................................................................................................... 954
3.40.86 10193 ........................................................................................................................................... 954
3.40.87 10194 ........................................................................................................................................... 955
3.40.88 10195 ........................................................................................................................................... 955
3.40.89 10196 ........................................................................................................................................... 956
3.40.90 10197 ........................................................................................................................................... 956
3.40.91 10198 ........................................................................................................................................... 956
3.40.92 10199 ........................................................................................................................................... 957
3.41 Codes 10200 to 10299 .................................................................................................................................. 958
3.41.1 10200 ............................................................................................................................................. 960
3.41.2 10201 ............................................................................................................................................. 960
3.41.3 10202 ............................................................................................................................................. 960
3.41.4 10203 ............................................................................................................................................. 961
3.41.5 10204 ............................................................................................................................................. 961
3.41.6 10205 ............................................................................................................................................. 961
3.41.7 10206 ............................................................................................................................................. 962
3.41.8 10207 ............................................................................................................................................. 962
3.41.9 10208 ............................................................................................................................................. 962
3.41.10 10209 ........................................................................................................................................... 963
3.41.11 10210 ........................................................................................................................................... 963
3.41.12 10211 ........................................................................................................................................... 963
3.41.13 10212 ........................................................................................................................................... 964
3.41.14 10213 ........................................................................................................................................... 964
3.41.15 10214 ........................................................................................................................................... 964
3.41.16 10215 ........................................................................................................................................... 965
3.41.17 10216 ........................................................................................................................................... 965
3.41.18 10217 ........................................................................................................................................... 966
3.41.19 10218 ........................................................................................................................................... 966
3.41.20 10219 ........................................................................................................................................... 966
3.41.21 10220 ........................................................................................................................................... 967
3.41.22 10221 ........................................................................................................................................... 967
3.41.23 10222 ........................................................................................................................................... 967
3.41.24 10223 ........................................................................................................................................... 968
3.41.25 10224 ........................................................................................................................................... 968
3.41.26 10225 ........................................................................................................................................... 968
3.41.27 10226 ........................................................................................................................................... 969

46 www.honeywell.com
 CONTENTS

3.41.28 10227 ........................................................................................................................................... 969

3.41.29 10228 ........................................................................................................................................... 969
3.41.30 10229 ........................................................................................................................................... 970
3.41.31 10230 ........................................................................................................................................... 970
3.41.32 10231 ........................................................................................................................................... 970
3.41.33 10232 ........................................................................................................................................... 971
3.41.34 10233 ........................................................................................................................................... 971
3.41.35 10234 ........................................................................................................................................... 971
3.41.36 10235 ........................................................................................................................................... 972
3.41.37 10236 ........................................................................................................................................... 972
3.41.38 10237 ........................................................................................................................................... 972
3.41.39 10238 ........................................................................................................................................... 973
3.41.40 10239 ........................................................................................................................................... 973
3.41.41 10240 ........................................................................................................................................... 974
3.41.42 10241 ........................................................................................................................................... 974
3.41.43 10242 ........................................................................................................................................... 974
3.41.44 10243 ........................................................................................................................................... 975
3.41.45 10244 ........................................................................................................................................... 975
3.41.46 10245 ........................................................................................................................................... 975
3.41.47 10246 ........................................................................................................................................... 976
3.41.48 10247 ........................................................................................................................................... 976
3.41.49 10248 ........................................................................................................................................... 976
3.41.50 10249 ........................................................................................................................................... 977
3.41.51 10250 ........................................................................................................................................... 977
3.41.52 10251 ........................................................................................................................................... 977
3.41.53 10252 ........................................................................................................................................... 978
3.41.54 10253 ........................................................................................................................................... 978
3.41.55 10254 ........................................................................................................................................... 978
3.41.56 10255 ........................................................................................................................................... 979
3.41.57 10256 ........................................................................................................................................... 979
3.41.58 10257 ........................................................................................................................................... 979
3.41.59 10258 ........................................................................................................................................... 980
3.41.60 10259 ........................................................................................................................................... 980
3.41.61 10260 ........................................................................................................................................... 980
3.41.62 10261 ........................................................................................................................................... 981
3.41.63 10262 ........................................................................................................................................... 981
3.41.64 10263 ........................................................................................................................................... 981
3.41.65 10264 ........................................................................................................................................... 982
3.41.66 10265 ........................................................................................................................................... 982
3.41.67 10266 ........................................................................................................................................... 982
3.41.68 10267 ........................................................................................................................................... 983
3.41.69 10268 ........................................................................................................................................... 983
3.41.70 10269 ........................................................................................................................................... 983
3.41.71 10270 ........................................................................................................................................... 984
3.41.72 10271 ........................................................................................................................................... 984
3.41.73 10272 ........................................................................................................................................... 984
3.41.74 10273 ........................................................................................................................................... 985
3.41.75 10274 ........................................................................................................................................... 985
3.41.76 10275 ........................................................................................................................................... 985
3.41.77 10276 ........................................................................................................................................... 986
3.41.78 10277 ........................................................................................................................................... 986
3.41.79 10278 ........................................................................................................................................... 986
3.41.80 10279 ........................................................................................................................................... 987
3.41.81 10280 ........................................................................................................................................... 987

47
CONTENTS

3.41.82 10282 ........................................................................................................................................... 987

3.41.83 10283 ........................................................................................................................................... 988
3.41.84 10284 ........................................................................................................................................... 988
3.41.85 10285 ........................................................................................................................................... 988
3.41.86 10287 ........................................................................................................................................... 989
3.41.87 10288 ........................................................................................................................................... 989
3.41.88 10289 ........................................................................................................................................... 990
3.41.89 10290 ........................................................................................................................................... 990
3.41.90 10291 ........................................................................................................................................... 990
3.41.91 10292 ........................................................................................................................................... 991
3.41.92 10293 ........................................................................................................................................... 991
3.41.93 10294 ........................................................................................................................................... 991
3.41.94 10295 ........................................................................................................................................... 992
3.41.95 10296 ........................................................................................................................................... 992
3.41.96 10297 ........................................................................................................................................... 992
3.41.97 10298 ........................................................................................................................................... 993
3.41.98 10299 ........................................................................................................................................... 993
3.42 Codes 10300 to 10399 .................................................................................................................................. 994
3.42.1 10300 ............................................................................................................................................. 996
3.42.2 10301 ............................................................................................................................................. 996
3.42.3 10302 ............................................................................................................................................. 996
3.42.4 10303 ............................................................................................................................................. 997
3.42.5 10304 ............................................................................................................................................. 997
3.42.6 10305 ............................................................................................................................................. 997
3.42.7 10306 ............................................................................................................................................. 998
3.42.8 10307 ............................................................................................................................................. 998
3.42.9 10308 ............................................................................................................................................. 998
3.42.10 10309 ........................................................................................................................................... 999
3.42.11 10312 ........................................................................................................................................... 999
3.42.12 10313 ......................................................................................................................................... 1000
3.42.13 10314 ......................................................................................................................................... 1000
3.42.14 10315 ......................................................................................................................................... 1000
3.42.15 10316 ......................................................................................................................................... 1001
3.42.16 10317 ......................................................................................................................................... 1001
3.42.17 10318 ......................................................................................................................................... 1001
3.42.18 10319 ......................................................................................................................................... 1002
3.42.19 10320 ......................................................................................................................................... 1002
3.42.20 10321 ......................................................................................................................................... 1002
3.42.21 10322 ......................................................................................................................................... 1003
3.42.22 10323 ......................................................................................................................................... 1003
3.42.23 10324 ......................................................................................................................................... 1003
3.42.24 10325 ......................................................................................................................................... 1004
3.42.25 10326 ......................................................................................................................................... 1004
3.42.26 10327 ......................................................................................................................................... 1004
3.42.27 10328 ......................................................................................................................................... 1005
3.42.28 10329 ......................................................................................................................................... 1005
3.42.29 10330 ......................................................................................................................................... 1005
3.42.30 10331 ......................................................................................................................................... 1006
3.42.31 10332 ......................................................................................................................................... 1006
3.42.32 10333 ......................................................................................................................................... 1007
3.42.33 10334 ......................................................................................................................................... 1007
3.42.34 10335 ......................................................................................................................................... 1007
3.42.35 10336 ......................................................................................................................................... 1008
3.42.36 10337 ......................................................................................................................................... 1008

48 www.honeywell.com
 CONTENTS

3.42.37 10338 ......................................................................................................................................... 1008

3.42.38 10339 ......................................................................................................................................... 1009
3.42.39 10340 ......................................................................................................................................... 1009
3.42.40 10341 ......................................................................................................................................... 1009
3.42.41 10342 ......................................................................................................................................... 1010
3.42.42 10343 ......................................................................................................................................... 1010
3.42.43 10344 ......................................................................................................................................... 1010
3.42.44 10345 ......................................................................................................................................... 1011
3.42.45 10346 ......................................................................................................................................... 1011
3.42.46 10347 ......................................................................................................................................... 1011
3.42.47 10348 ......................................................................................................................................... 1012
3.42.48 10349 ......................................................................................................................................... 1012
3.42.49 10350 ......................................................................................................................................... 1012
3.42.50 10351 ......................................................................................................................................... 1013
3.42.51 10352 ......................................................................................................................................... 1013
3.42.52 10353 ......................................................................................................................................... 1013
3.42.53 10354 ......................................................................................................................................... 1014
3.42.54 10355 ......................................................................................................................................... 1014
3.42.55 10356 ......................................................................................................................................... 1014
3.42.56 10357 ......................................................................................................................................... 1015
3.42.57 10358 ......................................................................................................................................... 1015
3.42.58 10359 ......................................................................................................................................... 1015
3.42.59 10360 ......................................................................................................................................... 1016
3.42.60 10361 ......................................................................................................................................... 1016
3.42.61 10362 ......................................................................................................................................... 1016
3.42.62 10363 ......................................................................................................................................... 1017
3.42.63 10364 ......................................................................................................................................... 1017
3.42.64 10365 ......................................................................................................................................... 1017
3.42.65 10366 ......................................................................................................................................... 1018
3.42.66 10367 ......................................................................................................................................... 1018
3.42.67 10368 ......................................................................................................................................... 1018
3.42.68 10369 ......................................................................................................................................... 1019
3.42.69 10370 ......................................................................................................................................... 1019
3.42.70 10371 ......................................................................................................................................... 1019
3.42.71 10372 ......................................................................................................................................... 1020
3.42.72 10373 ......................................................................................................................................... 1020
3.42.73 10374 ......................................................................................................................................... 1020
3.42.74 10375 ......................................................................................................................................... 1021
3.42.75 10376 ......................................................................................................................................... 1021
3.42.76 10377 ......................................................................................................................................... 1021
3.42.77 10378 ......................................................................................................................................... 1022
3.42.78 10379 ......................................................................................................................................... 1022
3.42.79 10380 ......................................................................................................................................... 1022
3.42.80 10381 ......................................................................................................................................... 1023
3.42.81 10382 ......................................................................................................................................... 1023
3.42.82 10383 ......................................................................................................................................... 1023
3.42.83 10384 ......................................................................................................................................... 1024
3.42.84 10385 ......................................................................................................................................... 1024
3.42.85 10386 ......................................................................................................................................... 1024
3.42.86 10387 ......................................................................................................................................... 1025
3.42.87 10388 ......................................................................................................................................... 1025
3.42.88 10389 ......................................................................................................................................... 1025
3.42.89 10390 ......................................................................................................................................... 1026
3.42.90 10392 ......................................................................................................................................... 1026

49
CONTENTS

3.42.91 10393 ......................................................................................................................................... 1026

3.42.92 10394 ......................................................................................................................................... 1027
3.42.93 10396 ......................................................................................................................................... 1027
3.42.94 10397 ......................................................................................................................................... 1027
3.42.95 10398 ......................................................................................................................................... 1028
3.42.96 10399 ......................................................................................................................................... 1028
3.43 Codes 10400 to 10496 ................................................................................................................................ 1029
3.43.1 10400 ........................................................................................................................................... 1031
3.43.2 10401 ........................................................................................................................................... 1031
3.43.3 10402 ........................................................................................................................................... 1031
3.43.4 10403 ........................................................................................................................................... 1032
3.43.5 10404 ........................................................................................................................................... 1032
3.43.6 10405 ........................................................................................................................................... 1032
3.43.7 10406 ........................................................................................................................................... 1033
3.43.8 10407 ........................................................................................................................................... 1033
3.43.9 10408 ........................................................................................................................................... 1033
3.43.10 10409 ......................................................................................................................................... 1034
3.43.11 10410 ......................................................................................................................................... 1034
3.43.12 10411 ......................................................................................................................................... 1034
3.43.13 10412 ......................................................................................................................................... 1035
3.43.14 10413 ......................................................................................................................................... 1035
3.43.15 10414 ......................................................................................................................................... 1035
3.43.16 10415 ......................................................................................................................................... 1036
3.43.17 10416 ......................................................................................................................................... 1036
3.43.18 10417 ......................................................................................................................................... 1036
3.43.19 10418 ......................................................................................................................................... 1037
3.43.20 10419 ......................................................................................................................................... 1037
3.43.21 10420 ......................................................................................................................................... 1037
3.43.22 10421 ......................................................................................................................................... 1038
3.43.23 10422 ......................................................................................................................................... 1038
3.43.24 10423 ......................................................................................................................................... 1038
3.43.25 10424 ......................................................................................................................................... 1039
3.43.26 10425 ......................................................................................................................................... 1039
3.43.27 10426 ......................................................................................................................................... 1039
3.43.28 10427 ......................................................................................................................................... 1040
3.43.29 10428 ......................................................................................................................................... 1040
3.43.30 10429 ......................................................................................................................................... 1040
3.43.31 10430 ......................................................................................................................................... 1041
3.43.32 10431 ......................................................................................................................................... 1041
3.43.33 10432 ......................................................................................................................................... 1042
3.43.34 10433 ......................................................................................................................................... 1042
3.43.35 10434 ......................................................................................................................................... 1042
3.43.36 10435 ......................................................................................................................................... 1043
3.43.37 10436 ......................................................................................................................................... 1043
3.43.38 10437 ......................................................................................................................................... 1043
3.43.39 10438 ......................................................................................................................................... 1044
3.43.40 10439 ......................................................................................................................................... 1044
3.43.41 10440 ......................................................................................................................................... 1044
3.43.42 10441 ......................................................................................................................................... 1045
3.43.43 10442 ......................................................................................................................................... 1045
3.43.44 10443 ......................................................................................................................................... 1045
3.43.45 10444 ......................................................................................................................................... 1046
3.43.46 10445 ......................................................................................................................................... 1046
3.43.47 10446 ......................................................................................................................................... 1046

50 www.honeywell.com
 CONTENTS

3.43.48 10447 ......................................................................................................................................... 1047

3.43.49 10448 ......................................................................................................................................... 1047
3.43.50 10449 ......................................................................................................................................... 1047
3.43.51 10450 ......................................................................................................................................... 1048
3.43.52 10451 ......................................................................................................................................... 1048
3.43.53 10452 ......................................................................................................................................... 1048
3.43.54 10453 ......................................................................................................................................... 1049
3.43.55 10454 ......................................................................................................................................... 1049
3.43.56 10455 ......................................................................................................................................... 1049
3.43.57 10456 ......................................................................................................................................... 1050
3.43.58 10457 ......................................................................................................................................... 1050
3.43.59 10458 ......................................................................................................................................... 1050
3.43.60 10459 ......................................................................................................................................... 1051
3.43.61 10460 ......................................................................................................................................... 1051
3.43.62 10461 ......................................................................................................................................... 1051
3.43.63 10462 ......................................................................................................................................... 1052
3.43.64 10463 ......................................................................................................................................... 1052
3.43.65 10464 ......................................................................................................................................... 1052
3.43.66 10465 ......................................................................................................................................... 1053
3.43.67 10466 ......................................................................................................................................... 1053
3.43.68 10467 ......................................................................................................................................... 1053
3.43.69 10468 ......................................................................................................................................... 1054
3.43.70 10469 ......................................................................................................................................... 1054
3.43.71 10470 ......................................................................................................................................... 1054
3.43.72 10471 ......................................................................................................................................... 1055
3.43.73 10472 ......................................................................................................................................... 1055
3.43.74 10473 ......................................................................................................................................... 1055
3.43.75 10474 ......................................................................................................................................... 1056
3.43.76 10475 ......................................................................................................................................... 1056
3.43.77 10476 ......................................................................................................................................... 1056
3.43.78 10477 ......................................................................................................................................... 1057
3.43.79 10478 ......................................................................................................................................... 1057
3.43.80 10479 ......................................................................................................................................... 1058
3.43.81 10480 ......................................................................................................................................... 1058
3.43.82 10480 ......................................................................................................................................... 1058
3.43.83 10481 ......................................................................................................................................... 1059
3.43.84 10482 ......................................................................................................................................... 1059
3.43.85 10483 ......................................................................................................................................... 1059
3.43.86 10484 ......................................................................................................................................... 1060
3.43.87 10485 ......................................................................................................................................... 1060
3.43.88 10486 ......................................................................................................................................... 1060
3.43.89 10487 ......................................................................................................................................... 1061
3.43.90 10490 ......................................................................................................................................... 1061
3.43.91 10491 ......................................................................................................................................... 1061
3.43.92 10492 ......................................................................................................................................... 1062
3.43.93 10493 ......................................................................................................................................... 1062
3.43.94 10494 ......................................................................................................................................... 1062
3.43.95 10495 ......................................................................................................................................... 1063
3.43.96 10496 ......................................................................................................................................... 1063
3.44 Codes 10500 to 10598 ................................................................................................................................ 1064
3.44.1 10500 ........................................................................................................................................... 1065
3.44.2 10501 ........................................................................................................................................... 1065
3.44.3 10502 ........................................................................................................................................... 1066
3.44.4 10503 ........................................................................................................................................... 1066

51
CONTENTS

3.44.5 10504 ........................................................................................................................................... 1067

3.44.6 10505 ........................................................................................................................................... 1067
3.44.7 10506 ........................................................................................................................................... 1067
3.44.8 10507 ........................................................................................................................................... 1068
3.44.9 10508 ........................................................................................................................................... 1068
3.44.10 10509 ......................................................................................................................................... 1068
3.44.11 10510 ......................................................................................................................................... 1069
3.44.12 10511 ......................................................................................................................................... 1069
3.44.13 10512 ......................................................................................................................................... 1069
3.44.14 10513 ......................................................................................................................................... 1070
3.44.15 10514 ......................................................................................................................................... 1070
3.44.16 10515 ......................................................................................................................................... 1070
3.44.17 10516 ......................................................................................................................................... 1071
3.44.18 10517 ......................................................................................................................................... 1071
3.44.19 10518 ......................................................................................................................................... 1071
3.44.20 10519 ......................................................................................................................................... 1072
3.44.21 10520 ......................................................................................................................................... 1072
3.44.22 10521 ......................................................................................................................................... 1072
3.44.23 10522 ......................................................................................................................................... 1073
3.44.24 10523 ......................................................................................................................................... 1073
3.44.25 10524 ......................................................................................................................................... 1073
3.44.26 10525 ......................................................................................................................................... 1074
3.44.27 10526 ......................................................................................................................................... 1074
3.44.28 10527 ......................................................................................................................................... 1074
3.44.29 10528 ......................................................................................................................................... 1075
3.44.30 10529 ......................................................................................................................................... 1075
3.44.31 10530 ......................................................................................................................................... 1075
3.44.32 10531 ......................................................................................................................................... 1076
3.44.33 10532 ......................................................................................................................................... 1076
3.44.34 10534 ......................................................................................................................................... 1076
3.44.35 10535 ......................................................................................................................................... 1077
3.44.36 10551 ......................................................................................................................................... 1077
3.44.37 10552 ......................................................................................................................................... 1078
3.44.38 10553 ......................................................................................................................................... 1078
3.44.39 10554 ......................................................................................................................................... 1078
3.44.40 10555 ......................................................................................................................................... 1079
3.44.41 10556 ......................................................................................................................................... 1079
3.44.42 10557 ......................................................................................................................................... 1079
3.44.43 10558 ......................................................................................................................................... 1080
3.44.44 10559 ......................................................................................................................................... 1080
3.44.45 10560 ......................................................................................................................................... 1080
3.44.46 10561 ......................................................................................................................................... 1081
3.44.47 10562 ......................................................................................................................................... 1081
3.44.48 10563 ......................................................................................................................................... 1081
3.44.49 10564 ......................................................................................................................................... 1082
3.44.50 10565 ......................................................................................................................................... 1082
3.44.51 10566 ......................................................................................................................................... 1082
3.44.52 10567 ......................................................................................................................................... 1083
3.44.53 10568 ......................................................................................................................................... 1083
3.44.54 10569 ......................................................................................................................................... 1083
3.44.55 10570 ......................................................................................................................................... 1084
3.44.56 10583 ......................................................................................................................................... 1084
3.44.57 10584 ......................................................................................................................................... 1085
3.44.58 10585 ......................................................................................................................................... 1085

52 www.honeywell.com
 CONTENTS

3.44.59 10586 ......................................................................................................................................... 1085

3.44.60 10587 ......................................................................................................................................... 1086
3.44.61 10588 ......................................................................................................................................... 1086
3.44.62 10589 ......................................................................................................................................... 1086
3.44.63 10590 ......................................................................................................................................... 1087
3.44.64 10591 ......................................................................................................................................... 1087
3.44.65 10592 ......................................................................................................................................... 1087
3.44.66 10593 ......................................................................................................................................... 1088
3.44.67 10594 ......................................................................................................................................... 1088
3.44.68 10595 ......................................................................................................................................... 1088
3.44.69 10596 ......................................................................................................................................... 1089
3.44.70 10597 ......................................................................................................................................... 1089
3.44.71 10598 ......................................................................................................................................... 1089
3.45 Codes 10601 to 10699 ................................................................................................................................ 1091
3.45.1 10601 ........................................................................................................................................... 1092
3.45.2 10602 ........................................................................................................................................... 1093
3.45.3 10603 ........................................................................................................................................... 1093
3.45.4 10604 ........................................................................................................................................... 1093
3.45.5 10605 ........................................................................................................................................... 1094
3.45.6 10606 ........................................................................................................................................... 1094
3.45.7 10607 ........................................................................................................................................... 1094
3.45.8 10608 ........................................................................................................................................... 1095
3.45.9 10609 ........................................................................................................................................... 1095
3.45.10 10610 ......................................................................................................................................... 1095
3.45.11 10611 .......................................................................................................................................... 1096
3.45.12 10612 ......................................................................................................................................... 1096
3.45.13 10613 ......................................................................................................................................... 1096
3.45.14 10625 ......................................................................................................................................... 1097
3.45.15 10626 ......................................................................................................................................... 1097
3.45.16 10627 ......................................................................................................................................... 1097
3.45.17 10628 ......................................................................................................................................... 1098
3.45.18 10629 ......................................................................................................................................... 1098
3.45.19 10631 ......................................................................................................................................... 1098
3.45.20 10632 ......................................................................................................................................... 1099
3.45.21 10633 ......................................................................................................................................... 1099
3.45.22 10634 ......................................................................................................................................... 1100
3.45.23 10635 ......................................................................................................................................... 1100
3.45.24 10636 ......................................................................................................................................... 1100
3.45.25 10637 ......................................................................................................................................... 1101
3.45.26 10638 ......................................................................................................................................... 1101
3.45.27 10639 ......................................................................................................................................... 1101
3.45.28 10640 ......................................................................................................................................... 1102
3.45.29 10641 ......................................................................................................................................... 1102
3.45.30 10642 ......................................................................................................................................... 1102
3.45.31 10643 ......................................................................................................................................... 1103
3.45.32 10644 ......................................................................................................................................... 1103
3.45.33 10645 ......................................................................................................................................... 1103
3.45.34 10646 ......................................................................................................................................... 1104
3.45.35 10647 ......................................................................................................................................... 1104
3.45.36 10648 ......................................................................................................................................... 1104
3.45.37 10649 ......................................................................................................................................... 1105
3.45.38 10650 ......................................................................................................................................... 1105
3.45.39 10651 ......................................................................................................................................... 1105
3.45.40 10652 ......................................................................................................................................... 1106

53
CONTENTS

3.45.41 10653 ......................................................................................................................................... 1106

3.45.42 10655 ......................................................................................................................................... 1106
3.45.43 10661 ......................................................................................................................................... 1107
3.45.44 10662 ......................................................................................................................................... 1107
3.45.45 10663 ......................................................................................................................................... 1107
3.45.46 10671 ......................................................................................................................................... 1108
3.45.47 10672 ......................................................................................................................................... 1108
3.45.48 10673 ......................................................................................................................................... 1108
3.45.49 10674 ......................................................................................................................................... 1109
3.45.50 10675 ......................................................................................................................................... 1109
3.45.51 10676 .......................................................................................................................................... 1110
3.45.52 10677 .......................................................................................................................................... 1110
3.45.53 10678 .......................................................................................................................................... 1110
3.45.54 10679 .......................................................................................................................................... 1111
3.45.55 10680 .......................................................................................................................................... 1111
3.45.56 10681 .......................................................................................................................................... 1111
3.45.57 10682 .......................................................................................................................................... 1112
3.45.58 10683 .......................................................................................................................................... 1112
3.45.59 10684 .......................................................................................................................................... 1112
3.45.60 10685 .......................................................................................................................................... 1113
3.45.61 10686 .......................................................................................................................................... 1113
3.45.62 10687 .......................................................................................................................................... 1113
3.45.63 10688 .......................................................................................................................................... 1114
3.45.64 10689 .......................................................................................................................................... 1114
3.45.65 10690 .......................................................................................................................................... 1114
3.45.66 10691 .......................................................................................................................................... 1115
3.45.67 10692 .......................................................................................................................................... 1115
3.45.68 10693 .......................................................................................................................................... 1115
3.45.69 10694 .......................................................................................................................................... 1116
3.45.70 10695 .......................................................................................................................................... 1116
3.45.71 10696 .......................................................................................................................................... 1116
3.45.72 10697 .......................................................................................................................................... 1117
3.45.73 10698 .......................................................................................................................................... 1117
3.45.74 10699 .......................................................................................................................................... 1117
3.46 Codes 10701 to 10799 ................................................................................................................................ 1119
3.46.1 10701 ........................................................................................................................................... 1120
3.46.2 10702 ........................................................................................................................................... 1120
3.46.3 10703 ........................................................................................................................................... 1121
3.46.4 10705 ........................................................................................................................................... 1121
3.46.5 10706 ........................................................................................................................................... 1121
3.46.6 10707 ........................................................................................................................................... 1122
3.46.7 10708 ........................................................................................................................................... 1122
3.46.8 10709 ........................................................................................................................................... 1122
3.46.9 10710 ........................................................................................................................................... 1123
3.46.10 10711 .......................................................................................................................................... 1123
3.46.11 10712 .......................................................................................................................................... 1123
3.46.12 10713 ......................................................................................................................................... 1124
3.46.13 10717 ......................................................................................................................................... 1124
3.46.14 10718 ......................................................................................................................................... 1124
3.46.15 10719 ......................................................................................................................................... 1125
3.46.16 10720 ......................................................................................................................................... 1125
3.46.17 10722 ......................................................................................................................................... 1125
3.46.18 10723 ......................................................................................................................................... 1126
3.46.19 10725 ......................................................................................................................................... 1126

54 www.honeywell.com
 CONTENTS

3.46.20 10726 ......................................................................................................................................... 1126

3.46.21 10727 ......................................................................................................................................... 1127
3.46.22 10730 ......................................................................................................................................... 1127
3.46.23 10732 ......................................................................................................................................... 1127
3.46.24 10733 ......................................................................................................................................... 1128
3.46.25 10734 ......................................................................................................................................... 1128
3.46.26 10735 ......................................................................................................................................... 1128
3.46.27 10736 ......................................................................................................................................... 1129
3.46.28 10737 ......................................................................................................................................... 1129
3.46.29 10738 ......................................................................................................................................... 1129
3.46.30 10739 ......................................................................................................................................... 1130
3.46.31 10740 ......................................................................................................................................... 1130
3.46.32 10741 ......................................................................................................................................... 1130
3.46.33 10742 ......................................................................................................................................... 1131
3.46.34 10743 ......................................................................................................................................... 1131
3.46.35 10744 ......................................................................................................................................... 1131
3.46.36 10745 ......................................................................................................................................... 1132
3.46.37 10747 ......................................................................................................................................... 1132
3.46.38 10751 ......................................................................................................................................... 1132
3.46.39 10752 ......................................................................................................................................... 1133
3.46.40 10753 ......................................................................................................................................... 1133
3.46.41 10754 ......................................................................................................................................... 1133
3.46.42 10755 ......................................................................................................................................... 1134
3.46.43 10756 ......................................................................................................................................... 1134
3.46.44 10757 ......................................................................................................................................... 1134
3.46.45 10758 ......................................................................................................................................... 1135
3.46.46 10759 ......................................................................................................................................... 1135
3.46.47 10760 ......................................................................................................................................... 1135
3.46.48 10761 ......................................................................................................................................... 1136
3.46.49 10783 ......................................................................................................................................... 1136
3.46.50 10784 ......................................................................................................................................... 1136
3.46.51 10785 ......................................................................................................................................... 1137
3.46.52 10786 ......................................................................................................................................... 1137
3.46.53 10787 ......................................................................................................................................... 1138
3.46.54 10788 ......................................................................................................................................... 1138
3.46.55 10789 ......................................................................................................................................... 1138
3.46.56 10790 ......................................................................................................................................... 1139
3.46.57 10791 ......................................................................................................................................... 1139
3.46.58 10792 ......................................................................................................................................... 1139
3.46.59 10793 ......................................................................................................................................... 1140
3.46.60 10794 ......................................................................................................................................... 1140
3.46.61 10795 ......................................................................................................................................... 1140
3.46.62 10796 ......................................................................................................................................... 1141
3.46.63 10797 ......................................................................................................................................... 1141
3.46.64 10798 ......................................................................................................................................... 1141
3.46.65 10799 ......................................................................................................................................... 1142
3.47 Codes 10801 to 1089 .................................................................................................................................. 1143
3.47.1 10801 ........................................................................................................................................... 1144
3.47.2 10802 ........................................................................................................................................... 1144
3.47.3 10803 ........................................................................................................................................... 1145
3.47.4 10804 ........................................................................................................................................... 1145
3.47.5 10805 ........................................................................................................................................... 1145
3.47.6 10806 ........................................................................................................................................... 1146
3.47.7 10807 ........................................................................................................................................... 1146

55
CONTENTS

3.47.8 10808 ........................................................................................................................................... 1146

3.47.9 10809 ........................................................................................................................................... 1147
3.47.10 10810 ......................................................................................................................................... 1147
3.47.11 10811 .......................................................................................................................................... 1147
3.47.12 10812 ......................................................................................................................................... 1148
3.47.13 10813 ......................................................................................................................................... 1148
3.47.14 10814 ......................................................................................................................................... 1148
3.47.15 10821 ......................................................................................................................................... 1149
3.47.16 10822 ......................................................................................................................................... 1149
3.47.17 10823 ......................................................................................................................................... 1149
3.47.18 10824 ......................................................................................................................................... 1150
3.47.19 10825 ......................................................................................................................................... 1150
3.47.20 10826 ......................................................................................................................................... 1150
3.47.21 10827 ......................................................................................................................................... 1151
3.47.22 10832 ......................................................................................................................................... 1151
3.47.23 10850 ......................................................................................................................................... 1151
3.47.24 10851 ......................................................................................................................................... 1152
3.47.25 10852 ......................................................................................................................................... 1152
3.47.26 10853 ......................................................................................................................................... 1152
3.47.27 10854 ......................................................................................................................................... 1153
3.47.28 10855 ......................................................................................................................................... 1153
3.47.29 10856 ......................................................................................................................................... 1153
3.47.30 10857 ......................................................................................................................................... 1154
3.47.31 10858 ......................................................................................................................................... 1154
3.47.32 10859 ......................................................................................................................................... 1154
3.47.33 10860 ......................................................................................................................................... 1155
3.47.34 10861 ......................................................................................................................................... 1155
3.47.35 10862 ......................................................................................................................................... 1155
3.47.36 10863 ......................................................................................................................................... 1156
3.47.37 10864 ......................................................................................................................................... 1156
3.47.38 10865 ......................................................................................................................................... 1156
3.47.39 10866 ......................................................................................................................................... 1157
3.47.40 10867 ......................................................................................................................................... 1157
3.47.41 10868 ......................................................................................................................................... 1157
3.47.42 10869 ......................................................................................................................................... 1158
3.47.43 10870 ......................................................................................................................................... 1158
3.47.44 10871 ......................................................................................................................................... 1158
3.47.45 10872 ......................................................................................................................................... 1159
3.47.46 10873 ......................................................................................................................................... 1159
3.47.47 10874 ......................................................................................................................................... 1159
3.47.48 10875 ......................................................................................................................................... 1160
3.47.49 10876 ......................................................................................................................................... 1160
3.47.50 10877 ......................................................................................................................................... 1160
3.47.51 10878 ......................................................................................................................................... 1161
3.47.52 10880 ......................................................................................................................................... 1161
3.47.53 10881 ......................................................................................................................................... 1161
3.47.54 10882 ......................................................................................................................................... 1162
3.47.55 10883 ......................................................................................................................................... 1162
3.47.56 10884 ......................................................................................................................................... 1162
3.47.57 10885 ......................................................................................................................................... 1163
3.47.58 10886 ......................................................................................................................................... 1163
3.47.59 10887 ......................................................................................................................................... 1163
3.47.60 10888 ......................................................................................................................................... 1164
3.47.61 10889 ......................................................................................................................................... 1164

56 www.honeywell.com
 CONTENTS

3.47.62 10890 ......................................................................................................................................... 1164

3.47.63 10891 ......................................................................................................................................... 1165
3.47.64 10892 ......................................................................................................................................... 1165
3.47.65 10893 ......................................................................................................................................... 1165
3.47.66 10895 ......................................................................................................................................... 1166
3.47.67 10896 ......................................................................................................................................... 1166
3.47.68 10897 ......................................................................................................................................... 1166
3.47.69 10898 ......................................................................................................................................... 1167
3.47.70 10899 ......................................................................................................................................... 1167
3.48 Codes 10901 to 10999 ................................................................................................................................ 1168
3.48.1 10901 ........................................................................................................................................... 1170
3.48.2 10902 ........................................................................................................................................... 1170
3.48.3 10903 ........................................................................................................................................... 1170
3.48.4 10904 ........................................................................................................................................... 1171
3.48.5 10905 ........................................................................................................................................... 1171
3.48.6 10906 ........................................................................................................................................... 1171
3.48.7 10907 ........................................................................................................................................... 1172
3.48.8 10908 ........................................................................................................................................... 1172
3.48.9 10909 ........................................................................................................................................... 1172
3.48.10 10910 ......................................................................................................................................... 1173
3.48.11 10911 .......................................................................................................................................... 1173
3.48.12 10912 ......................................................................................................................................... 1173
3.48.13 10913 ......................................................................................................................................... 1174
3.48.14 10914 ......................................................................................................................................... 1174
3.48.15 10915 ......................................................................................................................................... 1174
3.48.16 10916 ......................................................................................................................................... 1175
3.48.17 10917 ......................................................................................................................................... 1175
3.48.18 10918 ......................................................................................................................................... 1175
3.48.19 10919 ......................................................................................................................................... 1176
3.48.20 10920 ......................................................................................................................................... 1176
3.48.21 10921 ......................................................................................................................................... 1176
3.48.22 10922 ......................................................................................................................................... 1177
3.48.23 10923 ......................................................................................................................................... 1177
3.48.24 10924 ......................................................................................................................................... 1177
3.48.25 10925 ......................................................................................................................................... 1178
3.48.26 10926 ......................................................................................................................................... 1178
3.48.27 10927 ......................................................................................................................................... 1178
3.48.28 10928 ......................................................................................................................................... 1179
3.48.29 10929 ......................................................................................................................................... 1179
3.48.30 10930 ......................................................................................................................................... 1179
3.48.31 10931 ......................................................................................................................................... 1180
3.48.32 10932 ......................................................................................................................................... 1180
3.48.33 10933 ......................................................................................................................................... 1180
3.48.34 10934 ......................................................................................................................................... 1181
3.48.35 10935 ......................................................................................................................................... 1181
3.48.36 10936 ......................................................................................................................................... 1181
3.48.37 10937 ......................................................................................................................................... 1182
3.48.38 10938 ......................................................................................................................................... 1182
3.48.39 10939 ......................................................................................................................................... 1182
3.48.40 10940 ......................................................................................................................................... 1183
3.48.41 10941 ......................................................................................................................................... 1183
3.48.42 10942 ......................................................................................................................................... 1183
3.48.43 10943 ......................................................................................................................................... 1184
3.48.44 10944 ......................................................................................................................................... 1184

57
CONTENTS

3.48.45 10945 ......................................................................................................................................... 1184

3.48.46 10946 ......................................................................................................................................... 1185
3.48.47 10947 ......................................................................................................................................... 1185
3.48.48 10948 ......................................................................................................................................... 1185
3.48.49 10949 ......................................................................................................................................... 1186
3.48.50 10951 ......................................................................................................................................... 1186
3.48.51 10952 ......................................................................................................................................... 1186
3.48.52 10953 ......................................................................................................................................... 1187
3.48.53 10954 ......................................................................................................................................... 1187
3.48.54 10955 ......................................................................................................................................... 1187
3.48.55 10956 ......................................................................................................................................... 1188
3.48.56 10957 ......................................................................................................................................... 1188
3.48.57 10958 ......................................................................................................................................... 1188
3.48.58 10959 ......................................................................................................................................... 1189
3.48.59 10960 ......................................................................................................................................... 1189
3.48.60 10961 ......................................................................................................................................... 1189
3.48.61 10962 ......................................................................................................................................... 1190
3.48.62 10963 ......................................................................................................................................... 1190
3.48.63 10966 ......................................................................................................................................... 1190
3.48.64 10968 ......................................................................................................................................... 1191
3.48.65 10969 ......................................................................................................................................... 1191
3.48.66 10970 ......................................................................................................................................... 1191
3.48.67 10971 ......................................................................................................................................... 1192
3.48.68 10972 ......................................................................................................................................... 1192
3.48.69 10973 ......................................................................................................................................... 1192
3.48.70 10974 ......................................................................................................................................... 1193
3.48.71 10975 ......................................................................................................................................... 1193
3.48.72 10976 ......................................................................................................................................... 1193
3.48.73 10977 ......................................................................................................................................... 1194
3.48.74 10978 ......................................................................................................................................... 1194
3.48.75 10979 ......................................................................................................................................... 1194
3.48.76 10980 ......................................................................................................................................... 1195
3.48.77 10981 ......................................................................................................................................... 1195
3.48.78 10982 ......................................................................................................................................... 1195
3.48.79 10983 ......................................................................................................................................... 1196
3.48.80 10984 ......................................................................................................................................... 1196
3.48.81 10985 ......................................................................................................................................... 1196
3.48.82 10986 ......................................................................................................................................... 1197
3.48.83 10987 ......................................................................................................................................... 1197
3.48.84 10988 ......................................................................................................................................... 1198
3.48.85 10989 ......................................................................................................................................... 1198
3.48.86 10990 ......................................................................................................................................... 1198
3.48.87 10991 ......................................................................................................................................... 1199
3.48.88 10992 ......................................................................................................................................... 1199
3.48.89 10993 ......................................................................................................................................... 1199
3.48.90 10994 ......................................................................................................................................... 1200
3.48.91 10995 ......................................................................................................................................... 1200
3.48.92 10996 ......................................................................................................................................... 1200
3.48.93 10997 ......................................................................................................................................... 1201
3.48.94 10998 ......................................................................................................................................... 1201
3.48.95 10999 ......................................................................................................................................... 1201
3.49 Codes 11011 to 11099 ................................................................................................................................. 1203
3.49.1 11011 ............................................................................................................................................ 1204
3.49.2 11012 ........................................................................................................................................... 1204

58 www.honeywell.com
 CONTENTS

3.49.3 11013 ........................................................................................................................................... 1205

3.49.4 11014 ........................................................................................................................................... 1205
3.49.5 11015 ........................................................................................................................................... 1205
3.49.6 11016 ........................................................................................................................................... 1206
3.49.7 11021 ........................................................................................................................................... 1206
3.49.8 11022 ........................................................................................................................................... 1206
3.49.9 11023 ........................................................................................................................................... 1207
3.49.10 11024 ......................................................................................................................................... 1207
3.49.11 11025 .......................................................................................................................................... 1207
3.49.12 11026 ......................................................................................................................................... 1208
3.49.13 11031 ......................................................................................................................................... 1208
3.49.14 11033 ......................................................................................................................................... 1209
3.49.15 11034 ......................................................................................................................................... 1209
3.49.16 11035 ......................................................................................................................................... 1209
3.49.17 11036 ......................................................................................................................................... 1210
3.49.18 11041 ......................................................................................................................................... 1210
3.49.19 11042 ......................................................................................................................................... 1210
3.49.20 11043 .......................................................................................................................................... 1211
3.49.21 11045 .......................................................................................................................................... 1211
3.49.22 11051 .......................................................................................................................................... 1211
3.49.23 11052 ......................................................................................................................................... 1212
3.49.24 11053 ......................................................................................................................................... 1212
3.49.25 11054 ......................................................................................................................................... 1212
3.49.26 11056 ......................................................................................................................................... 1213
3.49.27 11057 ......................................................................................................................................... 1213
3.49.28 11058 ......................................................................................................................................... 1213
3.49.29 11059 ......................................................................................................................................... 1214
3.49.30 11061 ......................................................................................................................................... 1214
3.49.31 11062 ......................................................................................................................................... 1214
3.49.32 11063 ......................................................................................................................................... 1215
3.49.33 11064 ......................................................................................................................................... 1215
3.49.34 11065 ......................................................................................................................................... 1215
3.49.35 11066 ......................................................................................................................................... 1216
3.49.36 11067 ......................................................................................................................................... 1216
3.49.37 11068 ......................................................................................................................................... 1216
3.49.38 11081 ......................................................................................................................................... 1217
3.49.39 11082 ......................................................................................................................................... 1217
3.49.40 11083 ......................................................................................................................................... 1217
3.49.41 11084 ......................................................................................................................................... 1218
3.49.42 11085 ......................................................................................................................................... 1218
3.49.43 11086 ......................................................................................................................................... 1218
3.49.44 11087 ......................................................................................................................................... 1219
3.49.45 11088 ......................................................................................................................................... 1219
3.49.46 11089 ......................................................................................................................................... 1219
3.49.47 11090 ......................................................................................................................................... 1220
3.49.48 11091 ......................................................................................................................................... 1220
3.49.49 11092 ......................................................................................................................................... 1220
3.49.50 11093 ......................................................................................................................................... 1221
3.49.51 11094 ......................................................................................................................................... 1221
3.49.52 11095 ......................................................................................................................................... 1221
3.49.53 11096 ......................................................................................................................................... 1222
3.49.54 11097 ......................................................................................................................................... 1222
3.49.55 11098 ......................................................................................................................................... 1223
3.49.56 11099 ......................................................................................................................................... 1223

59
CONTENTS

3.50 Codes 11101 to 11195 ................................................................................................................................. 1224

3.50.1 11101 ............................................................................................................................................ 1225
3.50.2 11102 ............................................................................................................................................ 1225
3.50.3 11103 ............................................................................................................................................ 1225
3.50.4 11104 ............................................................................................................................................ 1226
3.50.5 11105 ............................................................................................................................................ 1226
3.50.6 11106 ............................................................................................................................................ 1226
3.50.7 11107 ............................................................................................................................................ 1227
3.50.8 11108 ............................................................................................................................................ 1227
3.50.9 11121 ............................................................................................................................................ 1227
3.50.10 11122 .......................................................................................................................................... 1228
3.50.11 11123 .......................................................................................................................................... 1228
3.50.12 11131 .......................................................................................................................................... 1228
3.50.13 11132 .......................................................................................................................................... 1229
3.50.14 11141 .......................................................................................................................................... 1229
3.50.15 11151 .......................................................................................................................................... 1229
3.50.16 11152 .......................................................................................................................................... 1230
3.50.17 11153 .......................................................................................................................................... 1230
3.50.18 11161 .......................................................................................................................................... 1230
3.50.19 11162 .......................................................................................................................................... 1231
3.50.20 11163 .......................................................................................................................................... 1231
3.50.21 11164 .......................................................................................................................................... 1231
3.50.22 11165 .......................................................................................................................................... 1232
3.50.23 11166 .......................................................................................................................................... 1232
3.50.24 11167 .......................................................................................................................................... 1232
3.50.25 11168 .......................................................................................................................................... 1233
3.50.26 11169 .......................................................................................................................................... 1233
3.50.27 11170 .......................................................................................................................................... 1233
3.50.28 11171 .......................................................................................................................................... 1234
3.50.29 11172 .......................................................................................................................................... 1234
3.50.30 11173 .......................................................................................................................................... 1234
3.50.31 11174 .......................................................................................................................................... 1235
3.50.32 11175 .......................................................................................................................................... 1235
3.50.33 11176 .......................................................................................................................................... 1235
3.50.34 11177 .......................................................................................................................................... 1236
3.50.35 11181 .......................................................................................................................................... 1236
3.50.36 11182 .......................................................................................................................................... 1236
3.50.37 11191 .......................................................................................................................................... 1237
3.50.38 11192 .......................................................................................................................................... 1237
3.50.39 11193 .......................................................................................................................................... 1237
3.50.40 11194 .......................................................................................................................................... 1238
3.50.41 11195 .......................................................................................................................................... 1238
3.51 Codes 11201 to 11282 ................................................................................................................................ 1239
3.51.1 11201 ........................................................................................................................................... 1239
3.51.2 11211 ............................................................................................................................................ 1240
3.51.3 11221 ........................................................................................................................................... 1240
3.51.4 11222 ........................................................................................................................................... 1240
3.51.5 11231 ........................................................................................................................................... 1241
3.51.6 11232 ........................................................................................................................................... 1241
3.51.7 11233 ........................................................................................................................................... 1241
3.51.8 11234 ........................................................................................................................................... 1242
3.51.9 11235 ........................................................................................................................................... 1242
3.51.10 11236 ......................................................................................................................................... 1242
3.51.11 11237 .......................................................................................................................................... 1243

60 www.honeywell.com
 CONTENTS

3.51.12 11238 ......................................................................................................................................... 1243

3.51.13 11239 ......................................................................................................................................... 1243
3.51.14 11240 ......................................................................................................................................... 1244
3.51.15 11250 ......................................................................................................................................... 1244
3.51.16 11251 ......................................................................................................................................... 1244
3.51.17 11252 ......................................................................................................................................... 1245
3.51.18 11253 ......................................................................................................................................... 1245
3.51.19 11254 ......................................................................................................................................... 1245
3.51.20 11255 ......................................................................................................................................... 1246
3.51.21 11256 ......................................................................................................................................... 1246
3.51.22 11257 ......................................................................................................................................... 1246
3.51.23 11260 ......................................................................................................................................... 1247
3.51.24 11270 ......................................................................................................................................... 1247
3.51.25 11271 ......................................................................................................................................... 1247
3.51.26 11272 ......................................................................................................................................... 1248
3.51.27 11273 ......................................................................................................................................... 1248
3.51.28 11280 ......................................................................................................................................... 1249
3.51.29 11281 ......................................................................................................................................... 1249
3.51.30 11282 ......................................................................................................................................... 1249
3.52 Codes 12001 to 12099 ................................................................................................................................ 1251
3.52.1 12001 ........................................................................................................................................... 1253
3.52.2 12002 ........................................................................................................................................... 1253
3.52.3 12003 ........................................................................................................................................... 1253
3.52.4 12004 ........................................................................................................................................... 1254
3.52.5 12005 ........................................................................................................................................... 1254
3.52.6 12006 ........................................................................................................................................... 1254
3.52.7 12007 ........................................................................................................................................... 1255
3.52.8 12008 ........................................................................................................................................... 1255
3.52.9 12009 ........................................................................................................................................... 1255
3.52.10 12010 ......................................................................................................................................... 1256
3.52.11 12011 .......................................................................................................................................... 1256
3.52.12 12012 ......................................................................................................................................... 1256
3.52.13 12013 ......................................................................................................................................... 1257
3.52.14 12014 ......................................................................................................................................... 1257
3.52.15 12015 ......................................................................................................................................... 1257
3.52.16 12016 ......................................................................................................................................... 1258
3.52.17 12017 ......................................................................................................................................... 1258
3.52.18 12018 ......................................................................................................................................... 1258
3.52.19 12019 ......................................................................................................................................... 1259
3.52.20 12022 ......................................................................................................................................... 1259
3.52.21 12023 ......................................................................................................................................... 1259
3.52.22 12024 ......................................................................................................................................... 1260
3.52.23 12025 ......................................................................................................................................... 1260
3.52.24 12026 ......................................................................................................................................... 1260
3.52.25 12027 ......................................................................................................................................... 1261
3.52.26 12028 ......................................................................................................................................... 1261
3.52.27 12029 ......................................................................................................................................... 1261
3.52.28 12030 ......................................................................................................................................... 1262
3.52.29 12031 ......................................................................................................................................... 1262
3.52.30 12032 ......................................................................................................................................... 1262
3.52.31 12033 ......................................................................................................................................... 1263
3.52.32 12034 ......................................................................................................................................... 1263
3.52.33 12035 ......................................................................................................................................... 1263
3.52.34 12036 ......................................................................................................................................... 1264

61
CONTENTS

3.52.35 12037 ......................................................................................................................................... 1264

3.52.36 12038 ......................................................................................................................................... 1264
3.52.37 12039 ......................................................................................................................................... 1265
3.52.38 12040 ......................................................................................................................................... 1265
3.52.39 12041 ......................................................................................................................................... 1265
3.52.40 12042 ......................................................................................................................................... 1266
3.52.41 12043 ......................................................................................................................................... 1266
3.52.42 12044 ......................................................................................................................................... 1267
3.52.43 12045 ......................................................................................................................................... 1267
3.52.44 12046 ......................................................................................................................................... 1267
3.52.45 12047 ......................................................................................................................................... 1268
3.52.46 12048 ......................................................................................................................................... 1268
3.52.47 12049 ......................................................................................................................................... 1268
3.52.48 12050 ......................................................................................................................................... 1269
3.52.49 12051 ......................................................................................................................................... 1269
3.52.50 12052 ......................................................................................................................................... 1269
3.52.51 12053 ......................................................................................................................................... 1270
3.52.52 12054 ......................................................................................................................................... 1270
3.52.53 12055 ......................................................................................................................................... 1270
3.52.54 12056 ......................................................................................................................................... 1271
3.52.55 12057 ......................................................................................................................................... 1271
3.52.56 12058 ......................................................................................................................................... 1271
3.52.57 12059 ......................................................................................................................................... 1272
3.52.58 12060 ......................................................................................................................................... 1272
3.52.59 12061 ......................................................................................................................................... 1272
3.52.60 12062 ......................................................................................................................................... 1273
3.52.61 12063 ......................................................................................................................................... 1273
3.52.62 12064 ......................................................................................................................................... 1274
3.52.63 12065 ......................................................................................................................................... 1274
3.52.64 12066 ......................................................................................................................................... 1274
3.52.65 12067 ......................................................................................................................................... 1275
3.52.66 12068 ......................................................................................................................................... 1275
3.52.67 12069 ......................................................................................................................................... 1275
3.52.68 12070 ......................................................................................................................................... 1276
3.52.69 12071 ......................................................................................................................................... 1276
3.52.70 12072 ......................................................................................................................................... 1276
3.52.71 12073 ......................................................................................................................................... 1277
3.52.72 12074 ......................................................................................................................................... 1277
3.52.73 12075 ......................................................................................................................................... 1277
3.52.74 12076 ......................................................................................................................................... 1278
3.52.75 12077 ......................................................................................................................................... 1278
3.52.76 12078 ......................................................................................................................................... 1278
3.52.77 12079 ......................................................................................................................................... 1279
3.52.78 12080 ......................................................................................................................................... 1279
3.52.79 12081 ......................................................................................................................................... 1279
3.52.80 12082 ......................................................................................................................................... 1280
3.52.81 12083 ......................................................................................................................................... 1280
3.52.82 12084 ......................................................................................................................................... 1280
3.52.83 12085 ......................................................................................................................................... 1281
3.52.84 12086 ......................................................................................................................................... 1281
3.52.85 12087 ......................................................................................................................................... 1281
3.52.86 12088 ......................................................................................................................................... 1282
3.52.87 12089 ......................................................................................................................................... 1282
3.52.88 12090 ......................................................................................................................................... 1282

62 www.honeywell.com
 CONTENTS

3.52.89 12091 ......................................................................................................................................... 1283

3.52.90 12092 ......................................................................................................................................... 1283
3.52.91 12093 ......................................................................................................................................... 1283
3.52.92 12094 ......................................................................................................................................... 1284
3.52.93 12095 ......................................................................................................................................... 1284
3.52.94 12096 ......................................................................................................................................... 1284
3.52.95 12097 ......................................................................................................................................... 1285
3.52.96 12098 ......................................................................................................................................... 1285
3.52.97 12099 ......................................................................................................................................... 1285
3.53 Codes 12100 to 12199 ................................................................................................................................ 1287
3.53.1 12100 ........................................................................................................................................... 1289
3.53.2 12101 ........................................................................................................................................... 1289
3.53.3 12102 ........................................................................................................................................... 1289
3.53.4 12103 ........................................................................................................................................... 1290
3.53.5 12104 ........................................................................................................................................... 1290
3.53.6 12105 ........................................................................................................................................... 1290
3.53.7 12106 ........................................................................................................................................... 1291
3.53.8 12107 ........................................................................................................................................... 1291
3.53.9 12108 ........................................................................................................................................... 1291
3.53.10 12109 ......................................................................................................................................... 1292
3.53.11 12110 .......................................................................................................................................... 1292
3.53.12 12111 .......................................................................................................................................... 1292
3.53.13 12112 ......................................................................................................................................... 1293
3.53.14 12113 ......................................................................................................................................... 1293
3.53.15 12114 ......................................................................................................................................... 1293
3.53.16 12115 ......................................................................................................................................... 1294
3.53.17 12116 ......................................................................................................................................... 1294
3.53.18 12117 ......................................................................................................................................... 1294
3.53.19 12118 ......................................................................................................................................... 1295
3.53.20 12119 ......................................................................................................................................... 1295
3.53.21 12120 ......................................................................................................................................... 1295
3.53.22 12121 ......................................................................................................................................... 1296
3.53.23 12122 ......................................................................................................................................... 1296
3.53.24 12123 ......................................................................................................................................... 1296
3.53.25 12124 ......................................................................................................................................... 1297
3.53.26 12125 ......................................................................................................................................... 1297
3.53.27 12126 ......................................................................................................................................... 1297
3.53.28 12127 ......................................................................................................................................... 1298
3.53.29 12128 ......................................................................................................................................... 1298
3.53.30 12129 ......................................................................................................................................... 1298
3.53.31 12130 ......................................................................................................................................... 1299
3.53.32 12131 ......................................................................................................................................... 1299
3.53.33 12132 ......................................................................................................................................... 1299
3.53.34 12133 ......................................................................................................................................... 1300
3.53.35 12134 ......................................................................................................................................... 1300
3.53.36 12135 ......................................................................................................................................... 1300
3.53.37 12136 ......................................................................................................................................... 1301
3.53.38 12137 ......................................................................................................................................... 1301
3.53.39 12138 ......................................................................................................................................... 1302
3.53.40 12139 ......................................................................................................................................... 1302
3.53.41 12140 ......................................................................................................................................... 1302
3.53.42 12141 ......................................................................................................................................... 1303
3.53.43 12142 ......................................................................................................................................... 1303
3.53.44 12143 ......................................................................................................................................... 1304

63
CONTENTS

3.53.45 12144 ......................................................................................................................................... 1304

3.53.46 12145 ......................................................................................................................................... 1304
3.53.47 12146 ......................................................................................................................................... 1305
3.53.48 12147 ......................................................................................................................................... 1305
3.53.49 12148 ......................................................................................................................................... 1305
3.53.50 12149 ......................................................................................................................................... 1306
3.53.51 12150 ......................................................................................................................................... 1306
3.53.52 12151 ......................................................................................................................................... 1307
3.53.53 12152 ......................................................................................................................................... 1307
3.53.54 12153 ......................................................................................................................................... 1307
3.53.55 12154 ......................................................................................................................................... 1308
3.53.56 12155 ......................................................................................................................................... 1308
3.53.57 12156 ......................................................................................................................................... 1308
3.53.58 12157 ......................................................................................................................................... 1309
3.53.59 12158 ......................................................................................................................................... 1309
3.53.60 12159 ......................................................................................................................................... 1309
3.53.61 12160 ......................................................................................................................................... 1310
3.53.62 12161 ......................................................................................................................................... 1310
3.53.63 12162 ......................................................................................................................................... 1310
3.53.64 12163 ......................................................................................................................................... 1311
3.53.65 12164 ......................................................................................................................................... 1311
3.53.66 12165 ......................................................................................................................................... 1311
3.53.67 12166 ......................................................................................................................................... 1312
3.53.68 12167 ......................................................................................................................................... 1312
3.53.69 12168 ......................................................................................................................................... 1312
3.53.70 12169 ......................................................................................................................................... 1313
3.53.71 12170 ......................................................................................................................................... 1313
3.53.72 12171 ......................................................................................................................................... 1313
3.53.73 12172 ......................................................................................................................................... 1314
3.53.74 12173 ......................................................................................................................................... 1314
3.53.75 12174 ......................................................................................................................................... 1314
3.53.76 12175 ......................................................................................................................................... 1315
3.53.77 12176 ......................................................................................................................................... 1315
3.53.78 12177 ......................................................................................................................................... 1315
3.53.79 12178 ......................................................................................................................................... 1316
3.53.80 12179 ......................................................................................................................................... 1316
3.53.81 12180 ......................................................................................................................................... 1316
3.53.82 12181 ......................................................................................................................................... 1317
3.53.83 12182 ......................................................................................................................................... 1317
3.53.84 12183 ......................................................................................................................................... 1318
3.53.85 12184 ......................................................................................................................................... 1318
3.53.86 12185 ......................................................................................................................................... 1318
3.53.87 12186 ......................................................................................................................................... 1319
3.53.88 12187 ......................................................................................................................................... 1319
3.53.89 12188 ......................................................................................................................................... 1319
3.53.90 12189 ......................................................................................................................................... 1320
3.53.91 12190 ......................................................................................................................................... 1320
3.53.92 12191 ......................................................................................................................................... 1320
3.53.93 12192 ......................................................................................................................................... 1321
3.53.94 12193 ......................................................................................................................................... 1321
3.53.95 12194 ......................................................................................................................................... 1321
3.53.96 12195 ......................................................................................................................................... 1322
3.53.97 12196 ......................................................................................................................................... 1322
3.53.98 12197 ......................................................................................................................................... 1322

64 www.honeywell.com
 CONTENTS

3.53.99 12198 ......................................................................................................................................... 1323

3.53.100 12199 ....................................................................................................................................... 1323
3.54 Codes 12200 to 12299 ................................................................................................................................ 1324
3.54.1 12200 ........................................................................................................................................... 1326
3.54.2 12201 ........................................................................................................................................... 1326
3.54.3 12202 ........................................................................................................................................... 1326
3.54.4 12203 ........................................................................................................................................... 1327
3.54.5 12204 ........................................................................................................................................... 1327
3.54.6 12205 ........................................................................................................................................... 1327
3.54.7 12206 ........................................................................................................................................... 1328
3.54.8 12207 ........................................................................................................................................... 1328
3.54.9 12208 ........................................................................................................................................... 1328
3.54.10 12209 ......................................................................................................................................... 1329
3.54.11 12210 ......................................................................................................................................... 1329
3.54.12 12211 ......................................................................................................................................... 1329
3.54.13 12212 ......................................................................................................................................... 1330
3.54.14 12213 ......................................................................................................................................... 1330
3.54.15 12214 ......................................................................................................................................... 1331
3.54.16 12215 ......................................................................................................................................... 1331
3.54.17 12216 ......................................................................................................................................... 1331
3.54.18 12217 ......................................................................................................................................... 1332
3.54.19 12218 ......................................................................................................................................... 1332
3.54.20 12219 ......................................................................................................................................... 1332
3.54.21 12220 ......................................................................................................................................... 1333
3.54.22 12221 ......................................................................................................................................... 1333
3.54.23 12222 ......................................................................................................................................... 1333
3.54.24 12223 ......................................................................................................................................... 1334
3.54.25 12224 ......................................................................................................................................... 1334
3.54.26 12225 ......................................................................................................................................... 1334
3.54.27 12226 ......................................................................................................................................... 1335
3.54.28 12227 ......................................................................................................................................... 1335
3.54.29 12228 ......................................................................................................................................... 1335
3.54.30 12229 ......................................................................................................................................... 1336
3.54.31 12230 ......................................................................................................................................... 1336
3.54.32 12231 ......................................................................................................................................... 1336
3.54.33 12232 ......................................................................................................................................... 1337
3.54.34 12233 ......................................................................................................................................... 1337
3.54.35 12234 ......................................................................................................................................... 1337
3.54.36 12235 ......................................................................................................................................... 1338
3.54.37 12236 ......................................................................................................................................... 1338
3.54.38 12237 ......................................................................................................................................... 1338
3.54.39 12238 ......................................................................................................................................... 1339
3.54.40 12239 ......................................................................................................................................... 1339
3.54.41 12240 ......................................................................................................................................... 1339
3.54.42 12241 ......................................................................................................................................... 1340
3.54.43 12242 ......................................................................................................................................... 1340
3.54.44 12243 ......................................................................................................................................... 1340
3.54.45 12244 ......................................................................................................................................... 1341
3.54.46 12245 ......................................................................................................................................... 1341
3.54.47 12246 ......................................................................................................................................... 1341
3.54.48 12247 ......................................................................................................................................... 1342
3.54.49 12248 ......................................................................................................................................... 1342
3.54.50 12249 ......................................................................................................................................... 1342
3.54.51 12250 ......................................................................................................................................... 1343

65
CONTENTS

3.54.52 12251 ......................................................................................................................................... 1343

3.54.53 12252 ......................................................................................................................................... 1343
3.54.54 12253 ......................................................................................................................................... 1344
3.54.55 12254 ......................................................................................................................................... 1344
3.54.56 12255 ......................................................................................................................................... 1344
3.54.57 12256 ......................................................................................................................................... 1345
3.54.58 12257 ......................................................................................................................................... 1345
3.54.59 12258 ......................................................................................................................................... 1345
3.54.60 12259 ......................................................................................................................................... 1346
3.54.61 12260 ......................................................................................................................................... 1346
3.54.62 12261 ......................................................................................................................................... 1346
3.54.63 12262 ......................................................................................................................................... 1347
3.54.64 12263 ......................................................................................................................................... 1347
3.54.65 12264 ......................................................................................................................................... 1347
3.54.66 12265 ......................................................................................................................................... 1348
3.54.67 12266 ......................................................................................................................................... 1348
3.54.68 12267 ......................................................................................................................................... 1348
3.54.69 12268 ......................................................................................................................................... 1349
3.54.70 12269 ......................................................................................................................................... 1349
3.54.71 12270 ......................................................................................................................................... 1350
3.54.72 12271 ......................................................................................................................................... 1350
3.54.73 12272 ......................................................................................................................................... 1350
3.54.74 12273 ......................................................................................................................................... 1351
3.54.75 12274 ......................................................................................................................................... 1351
3.54.76 12275 ......................................................................................................................................... 1351
3.54.77 12276 ......................................................................................................................................... 1352
3.54.78 12277 ......................................................................................................................................... 1352
3.54.79 12278 ......................................................................................................................................... 1352
3.54.80 12279 ......................................................................................................................................... 1353
3.54.81 12280 ......................................................................................................................................... 1353
3.54.82 12281 ......................................................................................................................................... 1353
3.54.83 12282 ......................................................................................................................................... 1354
3.54.84 12283 ......................................................................................................................................... 1354
3.54.85 12284 ......................................................................................................................................... 1355
3.54.86 12285 ......................................................................................................................................... 1355
3.54.87 12286 ......................................................................................................................................... 1355
3.54.88 12287 ......................................................................................................................................... 1356
3.54.89 12288 ......................................................................................................................................... 1356
3.54.90 12289 ......................................................................................................................................... 1356
3.54.91 12290 ......................................................................................................................................... 1357
3.54.92 12291 ......................................................................................................................................... 1357
3.54.93 12292 ......................................................................................................................................... 1357
3.54.94 12293 ......................................................................................................................................... 1358
3.54.95 12294 ......................................................................................................................................... 1358
3.54.96 12295 ......................................................................................................................................... 1358
3.54.97 12296 ......................................................................................................................................... 1359
3.54.98 12297 ......................................................................................................................................... 1359
3.54.99 12298 ......................................................................................................................................... 1359
3.54.100 12299 ....................................................................................................................................... 1360
3.55 Codes 12300 to 12399 ................................................................................................................................ 1361
3.55.1 12300 ........................................................................................................................................... 1363
3.55.2 12301 ........................................................................................................................................... 1363
3.55.3 12302 ........................................................................................................................................... 1363
3.55.4 12303 ........................................................................................................................................... 1364

66 www.honeywell.com
 CONTENTS

3.55.5 12304 ........................................................................................................................................... 1364

3.55.6 12305 ........................................................................................................................................... 1364
3.55.7 12306 ........................................................................................................................................... 1365
3.55.8 12307 ........................................................................................................................................... 1365
3.55.9 12308 ........................................................................................................................................... 1365
3.55.10 12309 ......................................................................................................................................... 1366
3.55.11 12310 ......................................................................................................................................... 1366
3.55.12 12311 ......................................................................................................................................... 1366
3.55.13 12312 ......................................................................................................................................... 1367
3.55.14 12313 ......................................................................................................................................... 1367
3.55.15 12314 ......................................................................................................................................... 1367
3.55.16 12315 ......................................................................................................................................... 1368
3.55.17 12316 ......................................................................................................................................... 1368
3.55.18 12317 ......................................................................................................................................... 1368
3.55.19 12318 ......................................................................................................................................... 1369
3.55.20 12319 ......................................................................................................................................... 1369
3.55.21 12320 ......................................................................................................................................... 1369
3.55.22 12321 ......................................................................................................................................... 1370
3.55.23 12322 ......................................................................................................................................... 1370
3.55.24 12323 ......................................................................................................................................... 1370
3.55.25 12324 ......................................................................................................................................... 1371
3.55.26 12325 ......................................................................................................................................... 1371
3.55.27 12326 ......................................................................................................................................... 1371
3.55.28 12327 ......................................................................................................................................... 1372
3.55.29 12328 ......................................................................................................................................... 1372
3.55.30 12329 ......................................................................................................................................... 1372
3.55.31 12330 ......................................................................................................................................... 1373
3.55.32 12331 ......................................................................................................................................... 1373
3.55.33 12332 ......................................................................................................................................... 1374
3.55.34 12333 ......................................................................................................................................... 1374
3.55.35 12334 ......................................................................................................................................... 1374
3.55.36 12335 ......................................................................................................................................... 1375
3.55.37 12336 ......................................................................................................................................... 1375
3.55.38 12337 ......................................................................................................................................... 1375
3.55.39 12338 ......................................................................................................................................... 1376
3.55.40 12339 ......................................................................................................................................... 1376
3.55.41 12340 ......................................................................................................................................... 1376
3.55.42 12341 ......................................................................................................................................... 1377
3.55.43 12342 ......................................................................................................................................... 1377
3.55.44 12343 ......................................................................................................................................... 1377
3.55.45 12344 ......................................................................................................................................... 1378
3.55.46 12345 ......................................................................................................................................... 1378
3.55.47 12346 ......................................................................................................................................... 1378
3.55.48 12347 ......................................................................................................................................... 1379
3.55.49 12348 ......................................................................................................................................... 1379
3.55.50 12349 ......................................................................................................................................... 1379
3.55.51 12350 ......................................................................................................................................... 1380
3.55.52 12351 ......................................................................................................................................... 1380
3.55.53 12352 ......................................................................................................................................... 1380
3.55.54 12353 ......................................................................................................................................... 1381
3.55.55 12354 ......................................................................................................................................... 1381
3.55.56 12355 ......................................................................................................................................... 1381
3.55.57 12356 ......................................................................................................................................... 1382
3.55.58 12357 ......................................................................................................................................... 1382

67
CONTENTS

3.55.59 12358 ......................................................................................................................................... 1382

3.55.60 12359 ......................................................................................................................................... 1383
3.55.61 12360 ......................................................................................................................................... 1383
3.55.62 12361 ......................................................................................................................................... 1383
3.55.63 12362 ......................................................................................................................................... 1384
3.55.64 12363 ......................................................................................................................................... 1384
3.55.65 12364 ......................................................................................................................................... 1384
3.55.66 12365 ......................................................................................................................................... 1385
3.55.67 12366 ......................................................................................................................................... 1385
3.55.68 12367 ......................................................................................................................................... 1385
3.55.69 12368 ......................................................................................................................................... 1386
3.55.70 12369 ......................................................................................................................................... 1386
3.55.71 12370 ......................................................................................................................................... 1386
3.55.72 12371 ......................................................................................................................................... 1387
3.55.73 12372 ......................................................................................................................................... 1387
3.55.74 12373 ......................................................................................................................................... 1388
3.55.75 12374 ......................................................................................................................................... 1388
3.55.76 12375 ......................................................................................................................................... 1388
3.55.77 12376 ......................................................................................................................................... 1389
3.55.78 12377 ......................................................................................................................................... 1389
3.55.79 12378 ......................................................................................................................................... 1389
3.55.80 12379 ......................................................................................................................................... 1390
3.55.81 12380 ......................................................................................................................................... 1390
3.55.82 12381 ......................................................................................................................................... 1390
3.55.83 12382 ......................................................................................................................................... 1391
3.55.84 12383 ......................................................................................................................................... 1391
3.55.85 12384 ......................................................................................................................................... 1391
3.55.86 12385 ......................................................................................................................................... 1392
3.55.87 12386 ......................................................................................................................................... 1392
3.55.88 12387 ......................................................................................................................................... 1392
3.55.89 12388 ......................................................................................................................................... 1393
3.55.90 12389 ......................................................................................................................................... 1393
3.55.91 12390 ......................................................................................................................................... 1393
3.55.92 12391 ......................................................................................................................................... 1394
3.55.93 12392 ......................................................................................................................................... 1394
3.55.94 12393 ......................................................................................................................................... 1394
3.55.95 12394 ......................................................................................................................................... 1395
3.55.96 12395 ......................................................................................................................................... 1395
3.55.97 12396 ......................................................................................................................................... 1395
3.55.98 12397 ......................................................................................................................................... 1396
3.55.99 12398 ......................................................................................................................................... 1396
3.55.100 12399 ....................................................................................................................................... 1396
3.56 Codes 12400 to 12497 ................................................................................................................................ 1398
3.56.1 12400 ........................................................................................................................................... 1400
3.56.2 12401 ........................................................................................................................................... 1400
3.56.3 12402 ........................................................................................................................................... 1400
3.56.4 12403 ........................................................................................................................................... 1401
3.56.5 12404 ........................................................................................................................................... 1401
3.56.6 12405 ........................................................................................................................................... 1401
3.56.7 12406 ........................................................................................................................................... 1402
3.56.8 12407 ........................................................................................................................................... 1402
3.56.9 12408 ........................................................................................................................................... 1402
3.56.10 12409 ......................................................................................................................................... 1403
3.56.11 12410 ......................................................................................................................................... 1403

68 www.honeywell.com
 CONTENTS

3.56.12 12411 ......................................................................................................................................... 1403

3.56.13 12412 ......................................................................................................................................... 1404
3.56.14 12413 ......................................................................................................................................... 1404
3.56.15 12414 ......................................................................................................................................... 1404
3.56.16 12415 ......................................................................................................................................... 1405
3.56.17 12416 ......................................................................................................................................... 1405
3.56.18 12417 ......................................................................................................................................... 1405
3.56.19 12418 ......................................................................................................................................... 1406
3.56.20 12419 ......................................................................................................................................... 1406
3.56.21 12420 ......................................................................................................................................... 1406
3.56.22 12421 ......................................................................................................................................... 1407
3.56.23 12422 ......................................................................................................................................... 1407
3.56.24 12423 ......................................................................................................................................... 1407
3.56.25 12424 ......................................................................................................................................... 1408
3.56.26 12425 ......................................................................................................................................... 1408
3.56.27 12426 ......................................................................................................................................... 1408
3.56.28 12427 ......................................................................................................................................... 1409
3.56.29 12428 ......................................................................................................................................... 1409
3.56.30 12429 ......................................................................................................................................... 1409
3.56.31 12430 ......................................................................................................................................... 1410
3.56.32 12431 ......................................................................................................................................... 1410
3.56.33 12432 ......................................................................................................................................... 1410
3.56.34 12433 ......................................................................................................................................... 1411
3.56.35 12434 ......................................................................................................................................... 1411
3.56.36 12435 ......................................................................................................................................... 1411
3.56.37 12436 ......................................................................................................................................... 1412
3.56.38 12437 ......................................................................................................................................... 1412
3.56.39 12438 ......................................................................................................................................... 1412
3.56.40 12439 ......................................................................................................................................... 1413
3.56.41 12440 ......................................................................................................................................... 1413
3.56.42 12441 ......................................................................................................................................... 1413
3.56.43 12442 ......................................................................................................................................... 1414
3.56.44 12443 ......................................................................................................................................... 1414
3.56.45 12444 ......................................................................................................................................... 1414
3.56.46 12445 ......................................................................................................................................... 1415
3.56.47 12446 ......................................................................................................................................... 1415
3.56.48 12447 ......................................................................................................................................... 1416
3.56.49 12448 ......................................................................................................................................... 1416
3.56.50 12449 ......................................................................................................................................... 1416
3.56.51 12450 ......................................................................................................................................... 1417
3.56.52 12451 ......................................................................................................................................... 1417
3.56.53 12452 ......................................................................................................................................... 1417
3.56.54 12453 ......................................................................................................................................... 1418
3.56.55 12454 ......................................................................................................................................... 1418
3.56.56 12455 ......................................................................................................................................... 1418
3.56.57 12456 ......................................................................................................................................... 1419
3.56.58 12457 ......................................................................................................................................... 1419
3.56.59 12461 ......................................................................................................................................... 1419
3.56.60 12462 ......................................................................................................................................... 1420
3.56.61 12463 ......................................................................................................................................... 1420
3.56.62 12464 ......................................................................................................................................... 1420
3.56.63 12465 ......................................................................................................................................... 1421
3.56.64 12466 ......................................................................................................................................... 1421
3.56.65 12467 ......................................................................................................................................... 1422

69
CONTENTS

3.56.66 12468 ......................................................................................................................................... 1422

3.56.67 12469 ......................................................................................................................................... 1422
3.56.68 12470 ......................................................................................................................................... 1423
3.56.69 12471 ......................................................................................................................................... 1423
3.56.70 12472 ......................................................................................................................................... 1423
3.56.71 12473 ......................................................................................................................................... 1424
3.56.72 12474 ......................................................................................................................................... 1424
3.56.73 12475 ......................................................................................................................................... 1425
3.56.74 12476 ......................................................................................................................................... 1425
3.56.75 12477 ......................................................................................................................................... 1425
3.56.76 12478 ......................................................................................................................................... 1426
3.56.77 12479 ......................................................................................................................................... 1426
3.56.78 12481 ......................................................................................................................................... 1426
3.56.79 12482 ......................................................................................................................................... 1427
3.56.80 12483 ......................................................................................................................................... 1427
3.56.81 12484 ......................................................................................................................................... 1427
3.56.82 12485 ......................................................................................................................................... 1428
3.56.83 12486 ......................................................................................................................................... 1428
3.56.84 12487 ......................................................................................................................................... 1428
3.56.85 12488 ......................................................................................................................................... 1429
3.56.86 12489 ......................................................................................................................................... 1429
3.56.87 12490 ......................................................................................................................................... 1429
3.56.88 12491 ......................................................................................................................................... 1430
3.56.89 12492 ......................................................................................................................................... 1430
3.56.90 12493 ......................................................................................................................................... 1430
3.56.91 12494 ......................................................................................................................................... 1431
3.56.92 12495 ......................................................................................................................................... 1431
3.56.93 12496 ......................................................................................................................................... 1431
3.57 Codes 12501 to 12561 ................................................................................................................................ 1433
3.57.1 12501 ........................................................................................................................................... 1434
3.57.2 12502 ........................................................................................................................................... 1434
3.57.3 12505 ........................................................................................................................................... 1434
3.57.4 12506 ........................................................................................................................................... 1435
3.57.5 12507 ........................................................................................................................................... 1435
3.57.6 12508 ........................................................................................................................................... 1435
3.57.7 12509 ........................................................................................................................................... 1436
3.57.8 12510 ........................................................................................................................................... 1436
3.57.9 12511 ........................................................................................................................................... 1436
3.57.10 12512 ......................................................................................................................................... 1437
3.57.11 12513 ......................................................................................................................................... 1437
3.57.12 12514 ......................................................................................................................................... 1437
3.57.13 12515 ......................................................................................................................................... 1438
3.57.14 12516 ......................................................................................................................................... 1438
3.57.15 12517 ......................................................................................................................................... 1438
3.57.16 12518 ......................................................................................................................................... 1439
3.57.17 12520 ......................................................................................................................................... 1439
3.57.18 12521 ......................................................................................................................................... 1439
3.57.19 12522 ......................................................................................................................................... 1440
3.57.20 12523 ......................................................................................................................................... 1440
3.57.21 12525 ......................................................................................................................................... 1440
3.57.22 12530 ......................................................................................................................................... 1441
3.57.23 12531 ......................................................................................................................................... 1441
3.57.24 12532 ......................................................................................................................................... 1441
3.57.25 12533 ......................................................................................................................................... 1442

70 www.honeywell.com
 CONTENTS

3.57.26 12534 ......................................................................................................................................... 1442

3.57.27 12535 ......................................................................................................................................... 1442
3.57.28 12536 ......................................................................................................................................... 1443
3.57.29 12537 ......................................................................................................................................... 1443
3.57.30 12538 ......................................................................................................................................... 1443
3.57.31 12539 ......................................................................................................................................... 1444
3.57.32 12540 ......................................................................................................................................... 1444
3.57.33 12541 ......................................................................................................................................... 1444
3.57.34 12542 ......................................................................................................................................... 1445
3.57.35 12543 ......................................................................................................................................... 1445
3.57.36 12544 ......................................................................................................................................... 1445
3.57.37 12545 ......................................................................................................................................... 1446
3.57.38 12546 ......................................................................................................................................... 1446
3.57.39 12547 ......................................................................................................................................... 1446
3.57.40 12548 ......................................................................................................................................... 1447
3.57.41 12549 ......................................................................................................................................... 1447
3.57.42 12550 ......................................................................................................................................... 1447
3.57.43 12551 ......................................................................................................................................... 1448
3.57.44 12556 ......................................................................................................................................... 1448
3.57.45 12557 ......................................................................................................................................... 1448
3.57.46 12560 ......................................................................................................................................... 1449
3.57.47 12561 ......................................................................................................................................... 1449
3.58 Codes 12601 to 12747 ................................................................................................................................ 1450
3.58.1 12601 ........................................................................................................................................... 1451
3.58.2 12602 ........................................................................................................................................... 1451
3.58.3 12603 ........................................................................................................................................... 1452
3.58.4 12604 ........................................................................................................................................... 1452
3.58.5 12605 ........................................................................................................................................... 1452
3.58.6 12606 ........................................................................................................................................... 1453
3.58.7 12607 ........................................................................................................................................... 1453
3.58.8 12608 ........................................................................................................................................... 1453
3.58.9 12609 ........................................................................................................................................... 1454
3.58.10 12610 ......................................................................................................................................... 1454
3.58.11 12611 .......................................................................................................................................... 1454
3.58.12 12612 ......................................................................................................................................... 1455
3.58.13 12613 ......................................................................................................................................... 1455
3.58.14 12614 ......................................................................................................................................... 1455
3.58.15 12615 ......................................................................................................................................... 1456
3.58.16 12616 ......................................................................................................................................... 1456
3.58.17 12617 ......................................................................................................................................... 1457
3.58.18 12618 ......................................................................................................................................... 1457
3.58.19 12619 ......................................................................................................................................... 1457
3.58.20 12620 ......................................................................................................................................... 1458
3.58.21 12621 ......................................................................................................................................... 1458
3.58.22 12622 ......................................................................................................................................... 1458
3.58.23 12623 ......................................................................................................................................... 1459
3.58.24 12624 ......................................................................................................................................... 1459
3.58.25 12625 ......................................................................................................................................... 1459
3.58.26 12626 ......................................................................................................................................... 1460
3.58.27 12627 ......................................................................................................................................... 1460
3.58.28 12628 ......................................................................................................................................... 1460
3.58.29 12629 ......................................................................................................................................... 1461
3.58.30 12630 ......................................................................................................................................... 1461
3.58.31 12631 ......................................................................................................................................... 1461

71
CONTENTS

3.58.32 12632 ......................................................................................................................................... 1462

3.58.33 12633 ......................................................................................................................................... 1462
3.58.34 12634 ......................................................................................................................................... 1462
3.58.35 12659 ......................................................................................................................................... 1463
3.58.36 12672 ......................................................................................................................................... 1463
3.58.37 12673 ......................................................................................................................................... 1463
3.58.38 12674 ......................................................................................................................................... 1464
3.58.39 12675 ......................................................................................................................................... 1464
3.58.40 12676 ......................................................................................................................................... 1465
3.58.41 12677 ......................................................................................................................................... 1465
3.58.42 12678 ......................................................................................................................................... 1465
3.58.43 12679 ......................................................................................................................................... 1466
3.58.44 12680 ......................................................................................................................................... 1466
3.58.45 12681 ......................................................................................................................................... 1466
3.58.46 12682 ......................................................................................................................................... 1467
3.58.47 12683 ......................................................................................................................................... 1467
3.58.48 12684 ......................................................................................................................................... 1467
3.58.49 12685 ......................................................................................................................................... 1468
3.58.50 12686 ......................................................................................................................................... 1468
3.58.51 12687 ......................................................................................................................................... 1468
3.58.52 12688 ......................................................................................................................................... 1469
3.58.53 12689 ......................................................................................................................................... 1469
3.58.54 12690 ......................................................................................................................................... 1470
3.58.55 12691 ......................................................................................................................................... 1470
3.58.56 12692 ......................................................................................................................................... 1470
3.58.57 12693 ......................................................................................................................................... 1471
3.58.58 12694 ......................................................................................................................................... 1471
3.58.59 12747 ......................................................................................................................................... 1471
3.59 Codes 12699 to 12728 ................................................................................................................................ 1473
3.59.1 12699 ........................................................................................................................................... 1473
3.59.2 12703 ........................................................................................................................................... 1474
3.59.3 12704 ........................................................................................................................................... 1474
3.59.4 12705 ........................................................................................................................................... 1474
3.59.5 12706 ........................................................................................................................................... 1475
3.59.6 12707 ........................................................................................................................................... 1475
3.59.7 12708 ........................................................................................................................................... 1475
3.59.8 12709 ........................................................................................................................................... 1476
3.59.9 12710 ........................................................................................................................................... 1476
3.59.10 12711 ......................................................................................................................................... 1476
3.59.11 12712 ......................................................................................................................................... 1477
3.59.12 12713 ......................................................................................................................................... 1477
3.59.13 12714 ......................................................................................................................................... 1477
3.59.14 12715 ......................................................................................................................................... 1478
3.59.15 12716 ......................................................................................................................................... 1478
3.59.16 12717 ......................................................................................................................................... 1478
3.59.17 12718 ......................................................................................................................................... 1479
3.59.18 12719 ......................................................................................................................................... 1479
3.59.19 12720 ......................................................................................................................................... 1479
3.59.20 12721 ......................................................................................................................................... 1480
3.59.21 12722 ......................................................................................................................................... 1480
3.59.22 12723 ......................................................................................................................................... 1480
3.59.23 12724 ......................................................................................................................................... 1481
3.59.24 12725 ......................................................................................................................................... 1481
3.59.25 12726 ......................................................................................................................................... 1481

72 www.honeywell.com
 CONTENTS

3.59.26 12727 ......................................................................................................................................... 1482

3.59.27 12728 ......................................................................................................................................... 1482
3.60 Codes 14101 to 14199 ................................................................................................................................ 1483
3.60.1 14101 ........................................................................................................................................... 1485
3.60.2 14102 ........................................................................................................................................... 1485
3.60.3 14103 ........................................................................................................................................... 1485
3.60.4 14104 ........................................................................................................................................... 1486
3.60.5 14105 ........................................................................................................................................... 1486
3.60.6 14106 ........................................................................................................................................... 1486
3.60.7 14107 ........................................................................................................................................... 1487
3.60.8 14108 ........................................................................................................................................... 1487
3.60.9 14109 ........................................................................................................................................... 1487
3.60.10 14110 ......................................................................................................................................... 1488
3.60.11 14111 .......................................................................................................................................... 1488
3.60.12 14112 ......................................................................................................................................... 1488
3.60.13 14113 ......................................................................................................................................... 1489
3.60.14 14114 ......................................................................................................................................... 1489
3.60.15 14115 ......................................................................................................................................... 1489
3.60.16 14116 ......................................................................................................................................... 1490
3.60.17 14117 ......................................................................................................................................... 1490
3.60.18 14118 ......................................................................................................................................... 1490
3.60.19 14119 ......................................................................................................................................... 1491
3.60.20 14120 ......................................................................................................................................... 1491
3.60.21 14121 ......................................................................................................................................... 1491
3.60.22 14122 ......................................................................................................................................... 1492
3.60.23 14123 ......................................................................................................................................... 1492
3.60.24 14124 ......................................................................................................................................... 1492
3.60.25 14125 ......................................................................................................................................... 1493
3.60.26 14126 ......................................................................................................................................... 1493
3.60.27 14127 ......................................................................................................................................... 1493
3.60.28 14128 ......................................................................................................................................... 1494
3.60.29 14129 ......................................................................................................................................... 1494
3.60.30 14130 ......................................................................................................................................... 1494
3.60.31 14131 ......................................................................................................................................... 1495
3.60.32 14132 ......................................................................................................................................... 1495
3.60.33 14133 ......................................................................................................................................... 1495
3.60.34 14134 ......................................................................................................................................... 1496
3.60.35 14135 ......................................................................................................................................... 1496
3.60.36 14136 ......................................................................................................................................... 1496
3.60.37 14137 ......................................................................................................................................... 1497
3.60.38 14138 ......................................................................................................................................... 1497
3.60.39 14139 ......................................................................................................................................... 1497
3.60.40 14140 ......................................................................................................................................... 1498
3.60.41 14141 ......................................................................................................................................... 1498
3.60.42 14142 ......................................................................................................................................... 1498
3.60.43 14143 ......................................................................................................................................... 1499
3.60.44 14144 ......................................................................................................................................... 1499
3.60.45 14145 ......................................................................................................................................... 1499
3.60.46 14146 ......................................................................................................................................... 1500
3.60.47 14147 ......................................................................................................................................... 1500
3.60.48 14148 ......................................................................................................................................... 1500
3.60.49 14149 ......................................................................................................................................... 1501
3.60.50 14150 ......................................................................................................................................... 1501
3.60.51 14151 ......................................................................................................................................... 1501

73
CONTENTS

3.60.52 14152 ......................................................................................................................................... 1502

3.60.53 14153 ......................................................................................................................................... 1502
3.60.54 14154 ......................................................................................................................................... 1502
3.60.55 14155 ......................................................................................................................................... 1503
3.60.56 14156 ......................................................................................................................................... 1503
3.60.57 14157 ......................................................................................................................................... 1503
3.60.58 14158 ......................................................................................................................................... 1504
3.60.59 14159 ......................................................................................................................................... 1504
3.60.60 14160 ......................................................................................................................................... 1504
3.60.61 14161 ......................................................................................................................................... 1505
3.60.62 14162 ......................................................................................................................................... 1505
3.60.63 14163 ......................................................................................................................................... 1505
3.60.64 14164 ......................................................................................................................................... 1506
3.60.65 14165 ......................................................................................................................................... 1506
3.60.66 14166 ......................................................................................................................................... 1506
3.60.67 14167 ......................................................................................................................................... 1507
3.60.68 14168 ......................................................................................................................................... 1507
3.60.69 14173 ......................................................................................................................................... 1507
3.60.70 14174 ......................................................................................................................................... 1508
3.60.71 14175 ......................................................................................................................................... 1508
3.60.72 14176 ......................................................................................................................................... 1508
3.60.73 14177 ......................................................................................................................................... 1509
3.60.74 14178 ......................................................................................................................................... 1509
3.60.75 14179 ......................................................................................................................................... 1509
3.60.76 14180 ......................................................................................................................................... 1510
3.60.77 14181 ......................................................................................................................................... 1510
3.60.78 14182 ......................................................................................................................................... 1510
3.60.79 14183 ......................................................................................................................................... 1511
3.60.80 14184 ......................................................................................................................................... 1511
3.60.81 14185 ......................................................................................................................................... 1511
3.60.82 14186 ......................................................................................................................................... 1512
3.60.83 14187 ......................................................................................................................................... 1512
3.60.84 14188 ......................................................................................................................................... 1512
3.60.85 14189 ......................................................................................................................................... 1513
3.60.86 14190 ......................................................................................................................................... 1513
3.60.87 14191 ......................................................................................................................................... 1513
3.60.88 14192 ......................................................................................................................................... 1514
3.60.89 14193 ......................................................................................................................................... 1514
3.60.90 14194 ......................................................................................................................................... 1514
3.60.91 14195 ......................................................................................................................................... 1515
3.60.92 14196 ......................................................................................................................................... 1515
3.60.93 14197 ......................................................................................................................................... 1515
3.60.94 14198 ......................................................................................................................................... 1516
3.60.95 14199 ......................................................................................................................................... 1516
3.61 Codes 14200 to 14297 ................................................................................................................................ 1517
3.61.1 14200 ........................................................................................................................................... 1518
3.61.2 14201 ........................................................................................................................................... 1519
3.61.3 14202 ........................................................................................................................................... 1519
3.61.4 14203 ........................................................................................................................................... 1519
3.61.5 14204 ........................................................................................................................................... 1520
3.61.6 14205 ........................................................................................................................................... 1520
3.61.7 14206 ........................................................................................................................................... 1520
3.61.8 14207 ........................................................................................................................................... 1521
3.61.9 14208 ........................................................................................................................................... 1521

74 www.honeywell.com
 CONTENTS

3.61.10 14209 ......................................................................................................................................... 1521

3.61.11 14210 ......................................................................................................................................... 1522
3.61.12 14211 ......................................................................................................................................... 1522
3.61.13 14212 ......................................................................................................................................... 1522
3.61.14 14213 ......................................................................................................................................... 1523
3.61.15 14214 ......................................................................................................................................... 1523
3.61.16 14215 ......................................................................................................................................... 1523
3.61.17 14216 ......................................................................................................................................... 1524
3.61.18 14219 ......................................................................................................................................... 1524
3.61.19 14220 ......................................................................................................................................... 1524
3.61.20 14221 ......................................................................................................................................... 1525
3.61.21 14222 ......................................................................................................................................... 1525
3.61.22 14223 ......................................................................................................................................... 1525
3.61.23 14224 ......................................................................................................................................... 1526
3.61.24 14225 ......................................................................................................................................... 1526
3.61.25 14226 ......................................................................................................................................... 1526
3.61.26 14227 ......................................................................................................................................... 1527
3.61.27 14228 ......................................................................................................................................... 1527
3.61.28 14229 ......................................................................................................................................... 1527
3.61.29 14230 ......................................................................................................................................... 1528
3.61.30 14231 ......................................................................................................................................... 1528
3.61.31 14232 ......................................................................................................................................... 1528
3.61.32 14233 ......................................................................................................................................... 1529
3.61.33 14234 ......................................................................................................................................... 1529
3.61.34 14236 ......................................................................................................................................... 1529
3.61.35 14237 ......................................................................................................................................... 1530
3.61.36 14238 ......................................................................................................................................... 1530
3.61.37 14239 ......................................................................................................................................... 1530
3.61.38 14240 ......................................................................................................................................... 1531
3.61.39 14251 ......................................................................................................................................... 1531
3.61.40 14252 ......................................................................................................................................... 1531
3.61.41 14253 ......................................................................................................................................... 1532
3.61.42 14254 ......................................................................................................................................... 1532
3.61.43 14255 ......................................................................................................................................... 1532
3.61.44 14256 ......................................................................................................................................... 1533
3.61.45 14257 ......................................................................................................................................... 1533
3.61.46 14258 ......................................................................................................................................... 1533
3.61.47 14259 ......................................................................................................................................... 1534
3.61.48 14260 ......................................................................................................................................... 1534
3.61.49 14261 ......................................................................................................................................... 1534
3.61.50 14262 ......................................................................................................................................... 1535
3.61.51 14263 ......................................................................................................................................... 1535
3.61.52 14264 ......................................................................................................................................... 1535
3.61.53 14265 ......................................................................................................................................... 1536
3.61.54 14266 ......................................................................................................................................... 1536
3.61.55 14267 ......................................................................................................................................... 1536
3.61.56 14268 ......................................................................................................................................... 1537
3.61.57 14269 ......................................................................................................................................... 1537
3.61.58 14270 ......................................................................................................................................... 1538
3.61.59 14271 ......................................................................................................................................... 1538
3.61.60 14272 ......................................................................................................................................... 1538
3.61.61 14273 ......................................................................................................................................... 1539
3.61.62 14274 ......................................................................................................................................... 1539
3.61.63 14275 ......................................................................................................................................... 1539

75
CONTENTS

3.61.64 14276 ......................................................................................................................................... 1540

3.61.65 14277 ......................................................................................................................................... 1540
3.61.66 14278 ......................................................................................................................................... 1540
3.61.67 14279 ......................................................................................................................................... 1541
3.61.68 14280 ......................................................................................................................................... 1541
3.61.69 14281 ......................................................................................................................................... 1541
3.61.70 14282 ......................................................................................................................................... 1542
3.61.71 14283 ......................................................................................................................................... 1542
3.61.72 14284 ......................................................................................................................................... 1542
3.61.73 14285 ......................................................................................................................................... 1543
3.61.74 14287 ......................................................................................................................................... 1543
3.61.75 14288 ......................................................................................................................................... 1543
3.61.76 14291 ......................................................................................................................................... 1544
3.61.77 14292 ......................................................................................................................................... 1544
3.61.78 14293 ......................................................................................................................................... 1544
3.61.79 14294 ......................................................................................................................................... 1545
3.61.80 14295 ......................................................................................................................................... 1545
3.61.81 14296 ......................................................................................................................................... 1545
3.61.82 14297 ......................................................................................................................................... 1546
3.62 Codes 14601 to 14699 ................................................................................................................................ 1547
3.62.1 14601 ........................................................................................................................................... 1549
3.62.2 14602 ........................................................................................................................................... 1549
3.62.3 14603 ........................................................................................................................................... 1549
3.62.4 14604 ........................................................................................................................................... 1550
3.62.5 14605 ........................................................................................................................................... 1550
3.62.6 14606 ........................................................................................................................................... 1550
3.62.7 14607 ........................................................................................................................................... 1551
3.62.8 14608 ........................................................................................................................................... 1551
3.62.9 14609 ........................................................................................................................................... 1551
3.62.10 14610 ......................................................................................................................................... 1552
3.62.11 14611 .......................................................................................................................................... 1552
3.62.12 14612 ......................................................................................................................................... 1552
3.62.13 14613 ......................................................................................................................................... 1553
3.62.14 14614 ......................................................................................................................................... 1553
3.62.15 14615 ......................................................................................................................................... 1553
3.62.16 14616 ......................................................................................................................................... 1554
3.62.17 14617 ......................................................................................................................................... 1554
3.62.18 14618 ......................................................................................................................................... 1554
3.62.19 14619 ......................................................................................................................................... 1555
3.62.20 14620 ......................................................................................................................................... 1555
3.62.21 14621 ......................................................................................................................................... 1555
3.62.22 14622 ......................................................................................................................................... 1556
3.62.23 14623 ......................................................................................................................................... 1556
3.62.24 14624 ......................................................................................................................................... 1556
3.62.25 14625 ......................................................................................................................................... 1557
3.62.26 14626 ......................................................................................................................................... 1557
3.62.27 14627 ......................................................................................................................................... 1557
3.62.28 14628 ......................................................................................................................................... 1558
3.62.29 14629 ......................................................................................................................................... 1558
3.62.30 14630 ......................................................................................................................................... 1558
3.62.31 14631 ......................................................................................................................................... 1559
3.62.32 14632 ......................................................................................................................................... 1559
3.62.33 14633 ......................................................................................................................................... 1559
3.62.34 14634 ......................................................................................................................................... 1560

76 www.honeywell.com
 CONTENTS

3.62.35 14635 ......................................................................................................................................... 1560

3.62.36 14636 ......................................................................................................................................... 1560
3.62.37 14637 ......................................................................................................................................... 1561
3.62.38 14638 ......................................................................................................................................... 1561
3.62.39 14639 ......................................................................................................................................... 1561
3.62.40 14640 ......................................................................................................................................... 1562
3.62.41 14641 ......................................................................................................................................... 1562
3.62.42 14642 ......................................................................................................................................... 1562
3.62.43 14643 ......................................................................................................................................... 1563
3.62.44 14644 ......................................................................................................................................... 1563
3.62.45 14645 ......................................................................................................................................... 1563
3.62.46 14646 ......................................................................................................................................... 1564
3.62.47 14647 ......................................................................................................................................... 1564
3.62.48 14648 ......................................................................................................................................... 1564
3.62.49 14649 ......................................................................................................................................... 1565
3.62.50 14650 ......................................................................................................................................... 1565
3.62.51 14651 ......................................................................................................................................... 1566
3.62.52 14652 ......................................................................................................................................... 1566
3.62.53 14653 ......................................................................................................................................... 1566
3.62.54 14654 ......................................................................................................................................... 1567
3.62.55 14655 ......................................................................................................................................... 1567
3.62.56 14656 ......................................................................................................................................... 1567
3.62.57 14657 ......................................................................................................................................... 1568
3.62.58 14658 ......................................................................................................................................... 1568
3.62.59 14659 ......................................................................................................................................... 1568
3.62.60 14660 ......................................................................................................................................... 1569
3.62.61 14661 ......................................................................................................................................... 1569
3.62.62 14662 ......................................................................................................................................... 1569
3.62.63 14663 ......................................................................................................................................... 1570
3.62.64 14664 ......................................................................................................................................... 1570
3.62.65 14665 ......................................................................................................................................... 1570
3.62.66 14666 ......................................................................................................................................... 1571
3.62.67 14667 ......................................................................................................................................... 1571
3.62.68 14668 ......................................................................................................................................... 1571
3.62.69 14669 ......................................................................................................................................... 1572
3.62.70 14670 ......................................................................................................................................... 1572
3.62.71 14671 ......................................................................................................................................... 1572
3.62.72 14672 ......................................................................................................................................... 1573
3.62.73 14673 ......................................................................................................................................... 1573
3.62.74 14674 ......................................................................................................................................... 1573
3.62.75 14675 ......................................................................................................................................... 1574
3.62.76 14676 ......................................................................................................................................... 1574
3.62.77 14677 ......................................................................................................................................... 1574
3.62.78 14678 ......................................................................................................................................... 1575
3.62.79 14679 ......................................................................................................................................... 1575
3.62.80 14680 ......................................................................................................................................... 1575
3.62.81 14681 ......................................................................................................................................... 1576
3.62.82 14682 ......................................................................................................................................... 1576
3.62.83 14683 ......................................................................................................................................... 1576
3.62.84 14684 ......................................................................................................................................... 1577
3.62.85 14685 ......................................................................................................................................... 1577
3.62.86 14686 ......................................................................................................................................... 1577
3.62.87 14687 ......................................................................................................................................... 1578
3.62.88 14688 ......................................................................................................................................... 1578

77
CONTENTS

3.62.89 14689 ......................................................................................................................................... 1578

3.62.90 14690 ......................................................................................................................................... 1579
3.62.91 14691 ......................................................................................................................................... 1579
3.62.92 14692 ......................................................................................................................................... 1579
3.62.93 14693 ......................................................................................................................................... 1580
3.62.94 14694 ......................................................................................................................................... 1580
3.62.95 14695 ......................................................................................................................................... 1580
3.62.96 14696 ......................................................................................................................................... 1581
3.62.97 14697 ......................................................................................................................................... 1581
3.62.98 14698 ......................................................................................................................................... 1581
3.62.99 14699 ......................................................................................................................................... 1582
3.63 Codes 14700 to 14721 ................................................................................................................................ 1583
3.63.1 14700 ........................................................................................................................................... 1583
3.63.2 14701 ........................................................................................................................................... 1583
3.63.3 14702 ........................................................................................................................................... 1584
3.63.4 14703 ........................................................................................................................................... 1584
3.63.5 14704 ........................................................................................................................................... 1584
3.63.6 14705 ........................................................................................................................................... 1585
3.63.7 14706 ........................................................................................................................................... 1585
3.63.8 14707 ........................................................................................................................................... 1585
3.63.9 14708 ........................................................................................................................................... 1586
3.63.10 14709 ......................................................................................................................................... 1586
3.63.11 14710 ......................................................................................................................................... 1586
3.63.12 14711 ......................................................................................................................................... 1587
3.63.13 14712 ......................................................................................................................................... 1587
3.63.14 14713 ......................................................................................................................................... 1587
3.63.15 14714 ......................................................................................................................................... 1588
3.63.16 14715 ......................................................................................................................................... 1588
3.63.17 14716 ......................................................................................................................................... 1589
3.63.18 14717 ......................................................................................................................................... 1589
3.63.19 14718 ......................................................................................................................................... 1589
3.63.20 14719 ......................................................................................................................................... 1590
3.63.21 14720 ......................................................................................................................................... 1590
3.63.22 14721 ......................................................................................................................................... 1590
3.64 Codes 15251 to 15299 ................................................................................................................................ 1592
3.64.1 15251 ........................................................................................................................................... 1593
3.64.2 15252 ........................................................................................................................................... 1593
3.64.3 15253 ........................................................................................................................................... 1593
3.64.4 15254 ........................................................................................................................................... 1594
3.64.5 15255 ........................................................................................................................................... 1594
3.64.6 15256 ........................................................................................................................................... 1594
3.64.7 15257 ........................................................................................................................................... 1595
3.64.8 15258 ........................................................................................................................................... 1595
3.64.9 15259 ........................................................................................................................................... 1595
3.64.10 15260 ......................................................................................................................................... 1596
3.64.11 15261 ......................................................................................................................................... 1596
3.64.12 15262 ......................................................................................................................................... 1596
3.64.13 15263 ......................................................................................................................................... 1597
3.64.14 15264 ......................................................................................................................................... 1597
3.64.15 15265 ......................................................................................................................................... 1597
3.64.16 15266 ......................................................................................................................................... 1598
3.64.17 15267 ......................................................................................................................................... 1598
3.64.18 15268 ......................................................................................................................................... 1598
3.64.19 15269 ......................................................................................................................................... 1599

78 www.honeywell.com
 CONTENTS

3.64.20 15270 ......................................................................................................................................... 1599

3.64.21 15271 ......................................................................................................................................... 1599
3.64.22 15272 ......................................................................................................................................... 1600
3.64.23 15273 ......................................................................................................................................... 1600
3.64.24 15274 ......................................................................................................................................... 1600
3.64.25 15275 ......................................................................................................................................... 1601
3.64.26 15276 ......................................................................................................................................... 1601
3.64.27 15277 ......................................................................................................................................... 1601
3.64.28 15278 ......................................................................................................................................... 1602
3.64.29 15279 ......................................................................................................................................... 1602
3.64.30 15280 ......................................................................................................................................... 1602
3.64.31 15281 ......................................................................................................................................... 1603
3.64.32 15282 ......................................................................................................................................... 1603
3.64.33 15283 ......................................................................................................................................... 1603
3.64.34 15284 ......................................................................................................................................... 1604
3.64.35 15285 ......................................................................................................................................... 1604
3.64.36 15286 ......................................................................................................................................... 1604
3.64.37 15287 ......................................................................................................................................... 1605
3.64.38 15288 ......................................................................................................................................... 1605
3.64.39 15289 ......................................................................................................................................... 1605
3.64.40 15290 ......................................................................................................................................... 1606
3.64.41 15291 ......................................................................................................................................... 1606
3.64.42 15292 ......................................................................................................................................... 1606
3.64.43 15293 ......................................................................................................................................... 1607
3.64.44 15294 ......................................................................................................................................... 1607
3.64.45 15295 ......................................................................................................................................... 1607
3.64.46 15296 ......................................................................................................................................... 1608
3.64.47 15297 ......................................................................................................................................... 1608
3.64.48 15298 ......................................................................................................................................... 1608
3.64.49 15299 ......................................................................................................................................... 1609
3.65 Codes 15300 to 15362 ................................................................................................................................ 1610
3.65.1 15300 ........................................................................................................................................... 1611
3.65.2 15301 ........................................................................................................................................... 1611
3.65.3 15302 ........................................................................................................................................... 1612
3.65.4 15303 ........................................................................................................................................... 1612
3.65.5 15304 ........................................................................................................................................... 1612
3.65.6 15305 ........................................................................................................................................... 1613
3.65.7 15306 ........................................................................................................................................... 1613
3.65.8 15307 ........................................................................................................................................... 1613
3.65.9 15308 ........................................................................................................................................... 1614
3.65.10 15309 ......................................................................................................................................... 1614
3.65.11 15310 ......................................................................................................................................... 1614
3.65.12 15311 ......................................................................................................................................... 1615
3.65.13 15312 ......................................................................................................................................... 1615
3.65.14 15313 ......................................................................................................................................... 1615
3.65.15 15314 ......................................................................................................................................... 1616
3.65.16 15315 ......................................................................................................................................... 1616
3.65.17 15316 ......................................................................................................................................... 1616
3.65.18 15317 ......................................................................................................................................... 1617
3.65.19 15318 ......................................................................................................................................... 1617
3.65.20 15319 ......................................................................................................................................... 1617
3.65.21 15320 ......................................................................................................................................... 1618
3.65.22 15321 ......................................................................................................................................... 1618
3.65.23 15322 ......................................................................................................................................... 1618

79
CONTENTS

3.65.24 15323 ......................................................................................................................................... 1619

3.65.25 15324 ......................................................................................................................................... 1619
3.65.26 15325 ......................................................................................................................................... 1619
3.65.27 15326 ......................................................................................................................................... 1620
3.65.28 15327 ......................................................................................................................................... 1620
3.65.29 15328 ......................................................................................................................................... 1620
3.65.30 15329 ......................................................................................................................................... 1621
3.65.31 15330 ......................................................................................................................................... 1621
3.65.32 15331 ......................................................................................................................................... 1621
3.65.33 15332 ......................................................................................................................................... 1622
3.65.34 15333 ......................................................................................................................................... 1622
3.65.35 15334 ......................................................................................................................................... 1622
3.65.36 15335 ......................................................................................................................................... 1623
3.65.37 15336 ......................................................................................................................................... 1623
3.65.38 15337 ......................................................................................................................................... 1623
3.65.39 15338 ......................................................................................................................................... 1624
3.65.40 15339 ......................................................................................................................................... 1624
3.65.41 15340 ......................................................................................................................................... 1624
3.65.42 15341 ......................................................................................................................................... 1625
3.65.43 15342 ......................................................................................................................................... 1625
3.65.44 15343 ......................................................................................................................................... 1625
3.65.45 15344 ......................................................................................................................................... 1626
3.65.46 15345 ......................................................................................................................................... 1626
3.65.47 15346 ......................................................................................................................................... 1626
3.65.48 15347 ......................................................................................................................................... 1627
3.65.49 15348 ......................................................................................................................................... 1627
3.65.50 15349 ......................................................................................................................................... 1627
3.65.51 15350 ......................................................................................................................................... 1628
3.65.52 15351 ......................................................................................................................................... 1628
3.65.53 15352 ......................................................................................................................................... 1628
3.65.54 15353 ......................................................................................................................................... 1629
3.65.55 15354 ......................................................................................................................................... 1629
3.65.56 15355 ......................................................................................................................................... 1629
3.65.57 15356 ......................................................................................................................................... 1630
3.65.58 15357 ......................................................................................................................................... 1630
3.65.59 15358 ......................................................................................................................................... 1630
3.65.60 15359 ......................................................................................................................................... 1631
3.65.61 15360 ......................................................................................................................................... 1631
3.65.62 15361 ......................................................................................................................................... 1631
3.65.63 15362 ......................................................................................................................................... 1632
3.66 Codes 15501 to 15519 ................................................................................................................................ 1633
3.66.1 15501 ........................................................................................................................................... 1633
3.66.2 15502 ........................................................................................................................................... 1633
3.66.3 15503 ........................................................................................................................................... 1634
3.66.4 15504 ........................................................................................................................................... 1634
3.66.5 15505 ........................................................................................................................................... 1634
3.66.6 15506 ........................................................................................................................................... 1635
3.66.7 15507 ........................................................................................................................................... 1635
3.66.8 15508 ........................................................................................................................................... 1635
3.66.9 15509 ........................................................................................................................................... 1636
3.66.10 15510 ......................................................................................................................................... 1636
3.66.11 15511 .......................................................................................................................................... 1636
3.66.12 15512 ......................................................................................................................................... 1637
3.66.13 15513 ......................................................................................................................................... 1637

80 www.honeywell.com
 CONTENTS

3.66.14 15514 ......................................................................................................................................... 1637

3.66.15 15515 ......................................................................................................................................... 1638
3.66.16 15516 ......................................................................................................................................... 1638
3.66.17 15517 ......................................................................................................................................... 1638
3.66.18 15518 ......................................................................................................................................... 1639
3.66.19 15519 ......................................................................................................................................... 1639
3.67 Codes 15601 to 15615 ................................................................................................................................ 1640
3.67.1 15601 ........................................................................................................................................... 1640
3.67.2 15602 ........................................................................................................................................... 1640
3.67.3 15603 ........................................................................................................................................... 1641
3.67.4 15604 ........................................................................................................................................... 1641
3.67.5 15605 ........................................................................................................................................... 1641
3.67.6 15606 ........................................................................................................................................... 1642
3.67.7 15607 ........................................................................................................................................... 1642
3.67.8 15608 ........................................................................................................................................... 1642
3.67.9 15609 ........................................................................................................................................... 1643
3.67.10 15610 ......................................................................................................................................... 1643
3.67.11 15611 .......................................................................................................................................... 1643
3.67.12 15612 ......................................................................................................................................... 1644
3.67.13 15613 ......................................................................................................................................... 1644
3.67.14 15614 ......................................................................................................................................... 1644
3.67.15 15615 ......................................................................................................................................... 1645
3.68 Codes 15801 to 15815 ................................................................................................................................ 1646
3.68.1 15801 ........................................................................................................................................... 1646
3.68.2 15802 ........................................................................................................................................... 1646
3.68.3 15803 ........................................................................................................................................... 1647
3.68.4 15804 ........................................................................................................................................... 1647
3.68.5 15805 ........................................................................................................................................... 1647
3.68.6 15806 ........................................................................................................................................... 1648
3.68.7 15807 ........................................................................................................................................... 1648
3.68.8 15808 ........................................................................................................................................... 1648
3.68.9 15809 ........................................................................................................................................... 1649
3.68.10 15810 ......................................................................................................................................... 1649
3.68.11 15811 .......................................................................................................................................... 1649
3.68.12 15812 ......................................................................................................................................... 1650
3.68.13 15813 ......................................................................................................................................... 1650
3.68.14 15814 ......................................................................................................................................... 1650
3.68.15 15815 ......................................................................................................................................... 1651
3.69 15819 .......................................................................................................................................................... 1652
3.70 15820 .......................................................................................................................................................... 1653
3.71 15821 .......................................................................................................................................................... 1654
3.72 15822 .......................................................................................................................................................... 1655
3.73 15823 .......................................................................................................................................................... 1656
3.74 15824 .......................................................................................................................................................... 1657
3.75 15825 .......................................................................................................................................................... 1658
3.76 15826 .......................................................................................................................................................... 1659
3.77 15827 .......................................................................................................................................................... 1660
3.78 15828 .......................................................................................................................................................... 1661
3.79 15829 .......................................................................................................................................................... 1662
3.80 15830 .......................................................................................................................................................... 1663
3.81 15831 .......................................................................................................................................................... 1664
3.82 15832 .......................................................................................................................................................... 1665
3.83 15833 .......................................................................................................................................................... 1666
3.84 15834 .......................................................................................................................................................... 1667

81
CONTENTS

3.85 15835 .......................................................................................................................................................... 1668

3.86 15836 .......................................................................................................................................................... 1669
3.87 15849 .......................................................................................................................................................... 1670
3.88 15850 .......................................................................................................................................................... 1671
3.89 15851 .......................................................................................................................................................... 1672
4 Expression Error Codes .................................................................................................................. 1673
4.1 Expression Codes 4005 to 4077 ................................................................................................................... 1674
4.1.1 4005 ............................................................................................................................................... 1674
4.1.2 4006 ............................................................................................................................................... 1675
4.1.3 4007 ............................................................................................................................................... 1675
4.1.4 4008 ............................................................................................................................................... 1675
4.1.5 4009 ............................................................................................................................................... 1675
4.1.6 4010 ............................................................................................................................................... 1676
4.1.7 4011 ............................................................................................................................................... 1676
4.1.8 4012 ............................................................................................................................................... 1676
4.1.9 4013 ............................................................................................................................................... 1676
4.1.10 4014 ............................................................................................................................................. 1677
4.1.11 4015 ............................................................................................................................................. 1677
4.1.12 4016 ............................................................................................................................................. 1677
4.1.13 4017 ............................................................................................................................................. 1677
4.1.14 4018 ............................................................................................................................................. 1678
4.1.15 4051 ............................................................................................................................................. 1678
4.1.16 4052 ............................................................................................................................................. 1678
4.1.17 4053 ............................................................................................................................................. 1678
4.1.18 4054 ............................................................................................................................................. 1678
4.1.19 4055 ............................................................................................................................................. 1679
4.1.20 4056 ............................................................................................................................................. 1679
4.1.21 4057 ............................................................................................................................................. 1679
4.1.22 4062 ............................................................................................................................................. 1679
4.1.23 4063 ............................................................................................................................................. 1680
4.1.24 4064 ............................................................................................................................................. 1680
4.1.25 4065 ............................................................................................................................................. 1680
4.1.26 4066 ............................................................................................................................................. 1680
4.1.27 4067 ............................................................................................................................................. 1681
4.1.28 4068 ............................................................................................................................................. 1681
4.1.29 4069 ............................................................................................................................................. 1681
4.1.30 4070 ............................................................................................................................................. 1682
4.1.31 4076 ............................................................................................................................................. 1682
4.1.32 4077 ............................................................................................................................................. 1682
5 Notices .............................................................................................................................................. 1683
5.1 Documentation feedback .............................................................................................................................. 1684
5.2 How to report a security vulnerability .......................................................................................................... 1685
5.3 Support and other contacts ............................................................................................................................ 1686
5.4 Training classes ............................................................................................................................................. 1689

82 www.honeywell.com
1 About This Document

This document provides a numerical listing of Control Builder related error codes with cause and work around
data where available. It does not describe error codes defined by other subsystems of the Experion system.

Revision history
Revision Date Description
A December 2013 Initial release of document.

83
1 ABOUT THIS DOCUMENT

84 www.honeywell.com
2 Introduction

Related topics
“Scope” on page 86

85
2 INTRODUCTION

2.1 Scope
This document describes the error codes generated from within Control Builder. It does not describe error codes
defined by other subsystems of the Experion system. Some errors displayed by Control Builder may originate
from these subsystems and are not owned by Control Builder.
For other error messages, refer to the Control Hardware Troubleshooting and Maintenance Guide and the
Process Manager I/O Troubleshooting and Maintenance Guide.

86 www.honeywell.com
3 Error Codes

87
3 ERROR CODES

3.1 AGA Error Codes

The following topic describes the AGA Error Codes.

Related topics
“AGA Error Codes” on page 88
The error codes associated with the American Gas Association (AGA) blocks are used to correct the
configuration and the calculation quality monitoring errors. Select Edit from the Connections tab of the
detail displays to edit the error codes related to the operating ranges. Note that only one message table
exists for all the error messages.

3.1.1 AGA Error Codes

The error codes associated with the American Gas Association (AGA) blocks are used to correct the
configuration and the calculation quality monitoring errors. Select Edit from the Connections tab of the detail
displays to edit the error codes related to the operating ranges. Note that only one message table exists for all the
error messages.
The errors are divided into two groups as follows:
• Warnings — Indicate that the configured or running conditions are outside the tolerance for the AGA
calculations being performed. The values can be calculated but should be viewed as out of tolerance.
• Errors — Indicate a fatal condition. The output values can be set to NaN until the configuration is corrected
or the operating conditions return to normal.
The following table provides the error codes and the messages with severity and associated with the AGA
calculation. These acronyms can be modified from the Acronym page of the configuration to convert range
values if units other than US are used.

AGA error codes

Warning or Error No. AGA Module Warning or Error Description

0 ALL - OK – NO ERRORS OR WARNINGS ECOUNTERED
(LEFT BLANK)
1 AGA 8 - ERROR PRESSURE HAS A NEGATIVE DERIVATIVE
DETAIL DEFAULT GAS DENSITY USED
2 AGA 8 - WARNING DENSITY IN BRAKET EXCEEDS MAXIMUM
DETAIL DEFAULT PROCEDURE USED
3 AGA 8 - ERROR MAXIMUM ITERATIONS EXCEEDED IN BRAKET
DETAIL DEFAULT DENSITY USED
4 AGA 8 - ERROR MAXIMUM ITERATIONS IN DDETAIL EXCEEDED
DETAIL LAST DENSITY USED
5 AGA 8 - ERROR THE ROOT WAS NOT BOUNDED IN DGROSS
GROSS
6 AGA 8 - ERROR NO CONVERGENCE IN DGROSS
GROSS
7 AGA 8 - ERROR VIRGS SQURE ROOT NEGATIVE
GROSS
8 AGA 8 - ERROR COMBINED VALUES OF GRGR, X[2] AND HV NOT
GROSS CONSISTENT
9 AGA 8 - ERROR INVALID TERM IN VIRGS
GROSS

88 www.honeywell.com
 3 ERROR CODES

Warning or Error No. AGA Module Warning or Error Description

11 AGA 8 - ERROR METHOD WAS NOT 1 OR 2
GROSS
12 AGA 8 - ERROR FLOWING PRESSURE (PF) <= 0.0 PR > 1740.0 PSIA
GROSS
13 AGA 8 - ERROR FLOWING TEMPERATURE (TF) < 14.0 OR > 149.0
GROSS DEG F
14 AGA 8 - ERROR HEATING VALUE (HV) < 477.0 OR > 1211.0 BTU/
GROSS FT^3
15 AGA 8 - ERROR GAS RELATIVE DENSITY (GRGR) < 0.55 OR >
GROSS 0.870
16 AGA 8 - ERROR MOLE FRACTION FOR N2 < 0.0 OR > 0.50
GROSS
OR FOR CO2 < 0.0 OR > 0.30
OR FOR H2 < 0.0 OR > 0.10
OR FOR CO < 0.0 OR > 0.03
17 AGA 8 - ERROR REFERENCE TEMPERATURE < 32.0 OR > 77.O DEG
GROSS F
18 AGA 8 - ERROR REFERENCE PRESSURE < 13.0 OR > 16.0 PSIA
GROSS
22 AGA 8 - WARNING FLOWING PRESSURE (PF) <=0.0 OR > 1200.0 PSIA
GROSS
23 AGA 8 - WARNING FLOWING TEMPERATURE (TF) < 32.0 OR > 130.0
GROSS DEG F
24 AGA 8 - WARNING HEATING VALUE (HV) < 805.0 OR > 1208.0 BTU/
GROSS FT^3
25 AGA 8 - WARNING GAS RELATIVE DENSITY (GRGR) < 0.55 OR >
GROSS 0.800
26 AGA 8 - WARNING MOLE FRACTION FOR N2 < 0.0 OR > 0.20
GROSS
OR FOR CO2 < 0.0 OR > 0.20
OR FOR H2 < 0.0 OR > 0.0
OR FOR CO < 0.0 OR > 0.0
32 AGA 8 - ERROR FLOWING PRESSURE (PF) < 0.0 OR > 40,000. PSIA
DETAIL
33 AGA 8 - ERROR FLOWING TEMPERATURE (TF) < -200 OR > 760
DETAIL DEG F
36 AGA 8 - ERROR MOLE FRACTION FOR METHANE < 0.0 OR > 1.0
DETAIL
FOR NITROGEN < 0.0 OR > 1.0
FOR CARBON DIOXIDE < 0.0 OR > 1.0
FOR ETHANE < 0.0 OR > 1.0
FOR PROPANE < 0.0 OR > 0.12
FOR WATER < 0.0 OR > 0.10
FOR H2S < 0.0 OR > 1.0
FOR HYDROGEN < 0.0 OR > 1.0
FOR CARBON MONOXIDE < 0.0 OR > 0.03

89
3 ERROR CODES

Warning or Error No. AGA Module Warning or Error Description

FOR OXYGEN < 0.0 OR > 0.21
FOR BUTANES < 0.0 OR > 0.06
FOR PENTANES < 0.0 OR > 0.04
FOR HEXANES + < 0.0 OR > 0.10
FOR HELIUM < 0.0 OR > 0.03
FOR ARGON < 0.0 OR > 1.0
37 AGA 8 - ERROR REFERENCE TEMPERATURE < 32.0 OR > 77.0 DEG
DETAIL F
38 AGA 8 - ERROR REFERENCE PRESSURE < 13.0 OR > 16.0 PSIA
DETAIL
39 AGA 8 - ERROR SUM OF MOLE FRACTIONS < 0.98 OR > 1.020
DETAIL
42 AGA 8 - WARNING FLOWING PRESSURE (PF) < 0.0 OR > 1750. PSIA
DETAIL
43 AGA 8 - WARNING FLOWING TEMPERATURE (TF) < 17 OR > 143 DEG
DETAIL F
46 AGA 8 - WARNING MOLE FRACTION FOR METHANE < 0.45 OR > 1.0
DETAIL
FOR NITROGEN < 0.0 OR > 0.5
FOR CARBON DIOXIDE < 0.0 OR > 0.3
FOR ETHANE < 0.0 OR > 0.1
FOR PROPANE < 0.0 OR > 0.04
FOR WATER < 0.0 OR > 0.0005
FOR H2S < 0.0 OR > 0.0002
FOR HYDROGEN < 0.0 OR > 0.1
FOR CARBON MONOXIDE < 0.0 OR > 0.03
FOR OXYGEN < 0.0 OR > 0.0
FOR BUTANES < 0.0 OR > 0.01
FOR PENTANES < 0.0 OR > 0.003
FOR HEXANES + < 0.0 OR > 0.002
FOR HELIUM < 0.0 OR > 0.002
FOR ARGON < 0.0 OR > 0.0
49 AGA 8 - WARNING SUM OF MOLE FRACTIONS < 0.9999 OR > 1.0001
DETAIL
51 AGA 3 - ERROR NTAPS WAS NOT 1 OR 2
ORIFICE
52 AGA 3 - ERROR FLOWING PRESSURE WAS <= 0.0 OR > 40000. PSIA
ORIFICE
53 AGA 3 - ERROR FLOWING TEMPERATURE < -200. OR > 760. DEG F
ORIFICE
54 AGA 3 - ERROR MATORF OR MATPIPE WAS NOT 1, 2 OR 3
ORIFICE
55 AGA 3 - ERROR ORIFICE DIAMETER WAS <=0 OR => 100.0 INCHES
ORIFICE

90 www.honeywell.com
 3 ERROR CODES

Warning or Error No. AGA Module Warning or Error Description

56 AGA 3 - ERROR PIPE DIAMETER WAS <= 0 OR => 100.0 INCHES
ORIFICE
57 AGA 3 - ERROR FLOWING OR STANDARD DENSITY WAS <= 0.0
ORIFICE LBM/FT^3
58 AGA 3 - ERROR DIFFERENTIAL PRESSURE WAS <= 0.0 INCHES
ORIFICE H2O
59 AGA 3 – ERROR GAS VISCOSITY WAS < 0.005 OR > 0.5
ORIFICE CENTIPOISES
60 AGA 3 – ERROR ISENTROPIC EXPONENT <= 1.0 OR => 2.0
ORIFICE
61 AGA 3 – ERROR IFLUID WAS NOT 1 OR 2
ORIFICE
62 AGA 3 – ERROR STANDARD TEMPERATURE WAS NOT = 60.0 DEG
ORIFICE F
63 AGA 3 – ERROR STANDARD PRESSURE WAS NOT = 14.73 PSIA
ORIFICE
64 AGA 3 – ERROR TAP LOCATION WAS NOT 1 OR 2 FOR NTAPS=2
ORIFICE
(PIPE) OR TAP LOCATION WAS NOT 1 FOR
NTAPS=1 (FLANGE)
65 AGA 3 – ERROR SUPERCOMPRESSIBILITY FACTOR WAS <= 0.0
ORIFICE
66 AGA 3 – ERROR RELATIVE DENSITY AT STANDARD CONDITIONS
ORIFICE WAS < 0.07 OR > 1.52
67 AGA 3 – ERROR CALIBRATION FACTOR WAS <= 0.0
ORIFICE
68 AGA 3 – ERROR COMPRESSIBILITY FACTOR AT STANDARD
ORIFICE CONDITIONS <= 0.0
69 AGA 3 – ERROR BETA RATIO (DO/DM) <= 0.0 OR => 1.0
ORIFICE
75 AGA 3 – WARNING ORIFICE DIAMETER WAS < 0.45 INCHES
ORIFICE
76 AGA 3 – WARNING PIPE DIAMETER WAS < 2.0 INCHES
ORIFICE
79 AGA 3 - WARNING BETA RATIO (DO/DM) WAS < 0.1 OR > 0.75
ORIFICE
80 GENERAL ERROR Output Multiplier <=0.0
CONFIG
81 GENERAL ERROR No Output Points Configured
CONFIG
82 GENERAL ERROR Invalid Output Parameter
CONFIG
83 AGA 3 - ERROR / AGA 3 Configuration Error (Any AGA 3 Error or
ORIFICE WARNING Warning encountered)
84 AGA 3 - ERROR Incomplete Input Configuration
ORIFICE
85 AGA 3 - ERROR Invalid Input Parameter
ORIFICE
86 AGA 3 - WARNING Pipe or Orifice Ref Temperature <=0, Please check
ORIFICE

91
3 ERROR CODES

Warning or Error No. AGA Module Warning or Error Description

87 AGA 5 - ERROR / AGA 5 Configuration Error (Any AGA 5 Error or
HEATING WARNING Warning encountered)
88 AGA 5 - ERROR Incomplete Input Configuration
HEATING
89 AGA 5 - ERROR Invalid Input Parameter
HEATING
90 AGA 7 - ERROR / AGA 7 Configuration Error (Any AGA 7 Error or
TURBINE WARNING Warning encountered)
91 AGA 7 - ERROR Incomplete Input Configuration
TURBINE
92 AGA 7 - ERROR Invalid Input Configuration
TURBINE
93 AGA 8 - ERROR / AGA 8 Configuration Error (Any AGA 8 Error or
GENERAL WARNING Warning encountered)
94 AGA 8 - ERROR References out of range
GENERAL
95 AGA 8 - ERROR Invalid Gas Point Parameters
GENERAL
96 AGA 9 - ERROR / AGA 9 Configuration Error (Any AGA 9 Error or
ULTRA WARNING Warning encountered)
97 AGA 9 - ERROR Incomplete Input Configuration
ULTRA
98 AGA 9 - ERROR Invalid Input Configuration
ULTRA
99 - Not Configured – LEFT BLANK

92 www.honeywell.com
 3 ERROR CODES

3.2 Codes 03A5 and 03A6

Related topics
“03A5” on page 93
“03A6” on page 93

3.2.1 03A5

Solution
This error code is reported when an unexpected timeout occurs.

3.2.2 03A6

Solution
This error code is reported when an unexpected state occurs or during 8051 IOLINK interface microcontroller
failure.

Solution
Attention
When this fault occurs, first recover the C300/IOLIM from the fail state. If the problem persists, replace the C300/
IOLIM.

93
3 ERROR CODES

3.3 Codes 1 to 22

Related topics
“1” on page 94
“2” on page 94
“3” on page 95
“4” on page 95
“5” on page 95
“6” on page 96
“7” on page 96
“8” on page 96
“9” on page 97
“10” on page 97
“11” on page 97
“12” on page 98
“13” on page 98
“14” on page 98
“15” on page 99
“16” on page 99
“17” on page 99
“18” on page 100
“19” on page 100
“20” on page 100
“21” on page 101
“22” on page 101

3.3.1 1
OK

Error name
CodeOk

Cause
None.

Solution
None.

3.3.2 2
No registry key found.

Error name
CMNNOKEY

94 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.3.3 3
Error opening/creating register key.

Error name
CMNREGCR

Cause
None.

Solution
None.

3.3.4 4
No match on the specified subkey.

Error ID
0

Error name
CMNNOKEYMTCH

Cause
None.

Solution
None.

3.3.5 5
The specified value does not exist.

Error ID
0

Error name
CMNNOVALMTCH

Cause
None.

95
3 ERROR CODES

Solution
None.

3.3.6 6
Specified value is of the wrong type.

Error ID
0

Error name
CMNVALTYP

Cause
None.

Solution
None.

3.3.7 7
Error attempting to retrieve registry value: cannot open key.

Error ID
0

Error name
CMNGETREGOPN

Cause
None.

Solution
None.

3.3.8 8
Error querying registry value.

Error ID
0

Error name
CMNGETREGQV

Cause
None.

96 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.3.9 9
Common registry path is invalid.

Error ID
0

Error name
CMNPATH

Cause
None.

Solution
None.

3.3.10 10
Error writing specified value to registry.

Error ID
0

Error name
CMNSETREGDW

Cause
None.

Solution
None.

3.3.11 11
Error writing specified string to registry.

Error ID
0

Error name
CMNSETREGSZ

Cause
None.

97
3 ERROR CODES

Solution
None.

3.3.12 12
Cannot retrieve Legal Copyright information from VerQueryValue.

Error ID
None.

Error name
CMNVerQueryValueLegalCopyRight

Cause
Could not find the Legal Copyright field in the VERSION_INFO structure in resource file. May be related to
the language being used in the resource file.

Solution
Check that the version information exists for the .EXE in question and retry. You can look at the file properties
from NT Explorer to check.

3.3.13 13
Cannot retrieve File Version information from VerQueryValue.

Error ID
None.

Error name
CMNVerQueryValueFileVersion

Cause
Could not find the file version field in the VERSION_INFO structure in the resource file. May be related to the
language being used in the resource file.

Solution
Check that the version information exists for the .EXE in question and retry. You can look at the file properties
from NT Explorer to check.

3.3.14 14
Cannot retrieve File Description information from VerQueryValue.

Error ID
None.

Error name
CMNVerQueryValueFileDescription

98 www.honeywell.com
 3 ERROR CODES

Cause
Could not find the file description field in the VERSION_INFO structure in resource file. May be related to the
language being used in the resource file.

Solution
Check that the version information exists for the .EXE in question and retry. You can look at the file properties
from NT Explorer to check.

3.3.15 15
Could not get VERSION_INFO from GetFileVersionInfo.

Error ID
None.

Error name
CMNGetFileVersionInfo

Cause
Could not get the VERSION_INFO structure from the resource.

Solution
Check that the version information exists for the .EXE in question and retry. You can look at the file properties
from the NT Explorer to recheck.

3.3.16 16
Error allocating memory for VERSION_INFO structure.

Error ID
None.

Error name
CMNNotAllocVersioninfo

Cause
Low memory situation.

Solution
Close windows and/or other applications and retry.

3.3.17 17
Could not get VERSION_INFO size from GetFileVersionInfoSize.

Error ID
None.

99
3 ERROR CODES

Error name
CMNGetFileVersonInfoSize

Cause
Could not get the size of the VERSION_INFO structure from the resource.

Solution
Check that the version information exists for the .EXE in question and retry. You can look at the file properties
from NT Explorer to check.

3.3.18 18
Could not get application's file name from GetModuleFileName.

Error ID
None.

Error name
CMNGetModuleFileName

Cause
Could not get the .EXE's path name.

Solution
None.

3.3.19 19
Internal error.

Error ID
None.

Error name
None.

Cause
None.

Solution
None.

3.3.20 20
Error opening/creating key while matching a string value.

Error ID
None.

100 www.honeywell.com
 3 ERROR CODES

Error name
CMNMtchStg

Cause
Invalid Registry structure or security privileges.

Solution
None.

3.3.21 21
Error opening/creating key while matching a DWORD value.

Error ID
None.

Error name
CMNMtchDW

Cause
Invalid Registry structure or security privileges.

Solution
None.

3.3.22 22
Error opening/creating key while enumerating a DWORD values.

Error ID
None.

Error name
CMNEnumDW

Cause
Invalid Registry structure or security privileges.

Solution
None.

101
3 ERROR CODES

3.4 Codes 1001 to 1077

Related topics
“1001” on page 103
“1002” on page 103
“1003” on page 104
“1004” on page 104
“1005” on page 104
“1006” on page 105
“1007” on page 105
“1008” on page 105
“1009” on page 106
“1010” on page 106
“1011” on page 106
“1012” on page 107
“1013” on page 107
“1014” on page 107
“1015” on page 108
“1016” on page 108
“1017” on page 108
“1018” on page 109
“1019” on page 109
“1020” on page 109
“1021” on page 110
“1022” on page 110
“1027” on page 110
“1028” on page 111
“1029” on page 111
“1030” on page 111
“1031” on page 112
“1032” on page 112
“1033” on page 112
“1034” on page 113
“1035” on page 113
“1036” on page 113
“1037” on page 114
“1038” on page 114
“1039” on page 114
“1040” on page 115
“1041” on page 115
“1042” on page 115
“1044” on page 116
“1045” on page 116
“1046” on page 116
“1047” on page 117
“1048” on page 117
“1049” on page 117

102 www.honeywell.com
 3 ERROR CODES

“1050” on page 118

“1051” on page 118
“1052” on page 118
“1053” on page 119
“1054” on page 119
“1055” on page 119
“1056” on page 120
“1057” on page 120
“1058” on page 120
“1059” on page 121
“1060” on page 121
“1061” on page 121
“1062” on page 122
“1063” on page 122
“1064” on page 122
“1065” on page 123
“1066” on page 123
“1067” on page 123
“1068” on page 124
“1069” on page 124
“1070” on page 124
“1071” on page 125
“1072” on page 125
“1073” on page 125
“1074” on page 126
“1075” on page 126
“1076” on page 126

3.4.1 1001
Undefined Error

Error ID
ERR_EHIUNDEF

Error name
EHIUNDEF

Cause
None.

Solution
None.

3.4.2 1002
String resource file not found.

103
3 ERROR CODES

Error ID
ERR_RESFNF

Error name
RESFNF

Cause
None.

Solution
None.

3.4.3 1003
Invalid parameter value.

Error ID
ERR_INVPARAM

Error name
INVPARAM

Cause
None.

Solution
None.

3.4.4 1004
Duplicate facility name detected.

Error ID
ERR_DUPFACNM

Error name
DUPFACNM

Cause
None.

Solution
None.

3.4.5 1005
Registry access denied.

104 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_NOREGACC

Error name
NOREGACC

Cause
None.

Solution
None.

3.4.6 1006
Error enumerating facility subkeys.

Error ID
ERR_NOCHILDKEYSFOUND

Error name
NOCHILDKEYSFOUND

Cause
None.

Solution
None.

3.4.7 1007
Facility subkey not found under ErrorStrings

Error ID
ERR_NOSUBKEY

Error name
NOSUBKEY

Cause
None.

Solution
None.

3.4.8 1008
Error reading facility ID value

105
3 ERROR CODES

Error ID
ERR_BADFACIDVAL

Error name
BADFACIDVAL

Cause
None.

Solution
None.

3.4.9 1009
Error attempting to match facility ID.

Error ID
ERR_NOIDMATCH

Error name
NOIDMATCH

Cause
None.

Solution
None.

3.4.10 1010
Error reading facility name value.

Error ID
ERR_BADFACNAMEVAL

Error name
BADFACNAMEVAL

Cause
None.

Solution
None.

3.4.11 1011
Registry data value too large for allocated buffer.

106 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_DATATOOLG

Error name
DATATOOLG

Cause
None.

Solution
None.

3.4.12 1012
No facility name matches this facility ID.

Error ID
ERR_NOIDNAMEMATCH

Error name
NOIDNAMEMATCH

Cause
None.

Solution
None.

3.4.13 1013
Facility's resource file has an invalid format.

Error ID
ERR_INVALIDFACFILE

Error name
INVALIDFACFILE

Cause
None.

Solution
None.

3.4.14 1014
Error loading internal ehi strings: resource file may not be available.

107
3 ERROR CODES

Error ID
ERR_LOADSTRING

Error name
LOADSTRING

Cause
None.

Solution
None.

3.4.15 1015
Error obtaining resource file base path.

Error ID
ERR_BADBASEPATH

Error name
BADBASEPATH

Cause
None.

Solution
None.

3.4.16 1016
Error obtaining path to error log file.

Error ID
ERR_BADLOGPATHVAL

Error name
BADLOGPATHVAL

Cause
None.

Solution
None.

3.4.17 1017
Error matching facility name to facility ID.

108 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_FACNMNIDMATCH

Error name
FACNMNIDMATCH

Cause
None.

Solution
None.

3.4.18 1018
Error installing facility.

Error ID
ERR_FACINSTALL

Error name
FACINSTALL

Cause
None.

Solution
None.

3.4.19 1019
Error obtaining defaults for TPSRESULT values.

Error ID
ERR_BADDFLTTPSRVAL

Error name
BADDFLTTPSRVAL

Cause
None.

Solution
None.

3.4.20 1020
Value to translate out of range. Lower 14 bits will be translated.

109
3 ERROR CODES

Error ID
ERR_INTOOR

Error name
INTOOR

Cause
None.

Solution
None.

3.4.21 1021
Facility name too long for internal buffers.

Error ID
ERR_FACNAMETOOLONG

Error name
FACNAMETOOLONG

Cause
None.

Solution
None.

3.4.22 1022
Path to resource file too long for internal Buffers.

Error ID
ERR_FACPATHTOOLONG

Error name
FACPATHTOOLONG

Cause
None.

Solution
None.

3.4.23 1027
Maximum number of stream entries exceeded.

110 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_STREAMOVERFLOW

Error name
STREAMOVERFLOW

Cause
None.

Solution
None.

3.4.24 1028
Error freeing stream allocations.

Error ID
ERR_BADSTRMFREE

Error name
BADSTRMFREE

Cause
None.

Solution
None.

3.4.25 1029
Error freeing extended error object.

Error ID
ERR_BADEXTDERRFREE

Error name
BADEXTDERRFREE

Cause
None.

Solution
None.

3.4.26 1030
Invalid error stream.

111
3 ERROR CODES

Error ID
ERR_BADSTREAMPTR

Error name
BADSTREAMPTR

Cause
None.

Solution
None.

3.4.27 1031
Error: stream has already been initiated.

Error ID
ERR_STRMSTARTED

Error name
STRMSTARTED

Cause
None.

Solution
None.

3.4.28 1032
Error allocating space for stream.

Error ID
ERR_STRMALLOC

Error name
STRMALLOC

Cause
None.

Solution
None.

3.4.29 1033
Error trying to add a stream element: stream has not been initialized.

112 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_ADDSTRMNOTSTARTED

Error name
ADDSTRMNOTSTARTED

Cause
None.

Solution
None.

3.4.30 1034
Cannot display an error stream: stream has not been initialized.

Error ID
ERR_RPTSTRMNOTSTARTED

Error name
RPTSTRMNOTSTARTED

Cause
None.

Solution
None.

3.4.31 1035
Error freeing stream allocation: stream has not been initialized.

Error ID
ERR_FREESTRMNOTSTARTED

Error name
FREESTRMNOTSTARTED

Cause
None.

Solution
None.

3.4.32 1036
Attempt to set a dynamic data element outside of prespecified range.

113
3 ERROR CODES

Error ID
ERR_DYNDATEDOOR

Error name
DYNDATEDOOR

Cause
None.

Solution
None.

3.4.33 1037
Error strings support up to <number> dynamic data elements.

Error ID
ERR_DYNDATTOOMANYELS

Error name
DYNDATTOOMANYELS

Cause
None.

Solution
None.

3.4.34 1038
Invalid Extended Error field specified.

Error ID
ERR_INVFLDID

Error name
INVFLDID

Cause
None.

Solution
None.

3.4.35 1039
Error allocating extended error object.

114 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_NULLTPSE

Error name
NULLTPSE

Cause
None.

Solution
None.

3.4.36 1040
Cannot set field IDs unless mode is U_TPSFIELDS.

Error ID
ERR_BADMODE

Error name
BADMODE

Cause
None.

Solution
None.

3.4.37 1041
Error allocating space for dynamic data string.

Error ID
ERR_DDBSTR

Error name
DDBSTR

Cause
None.

Solution
None.

3.4.38 1042
Error descriptor is too large for internal buffers.

115
3 ERROR CODES

Error ID
ERR_ERRSTRINGTOOLONG

Error name
STRINGTOOLONG

Cause
None.

Solution
None.

3.4.39 1044
Field ID in range but not defined.

Error ID
ERR_FLDIDNOTFOUND

Error name
FLDIDNOTFOUND

Cause
None.

Solution
None.

3.4.40 1045
Client string is too large for internal buffers.

Error ID
ERR_USERCATSTRITOOLONG

Error name
USERCATSTRITOOLONG

Cause
None.

Solution
None.

3.4.41 1046
A dynamic data element is too large for internal buffers.

116 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_DYNDATELTOOLONG

Error name
DYNDATELTOOLONG

Cause
None.

Solution
None.

3.4.42 1047
Error loading EHI resource library.

Error ID
ERR_EHILOADLIBRARY

Error name
LOADLIBRARY

Cause
None.

Solution
None.

3.4.43 1048
Facility' FFC doesn't match registered value.

Error ID
ERR_NOFACFILEFFCMATCH

Error name
NOFACFILEFFCMATCH

Cause
None.

Solution
None.

3.4.44 1049
Error loading Facility ID string.

117
3 ERROR CODES

Error ID
ERR_FFCLOADSTRING

Error name
FFCLOADSTRING

Cause
None.

Solution
None.

3.4.45 1050
Error loading defined errors string.

Error ID
ERR_NUMERRLOADSTRING

Error name
NUMERRLOADSTRING

Cause
None.

Solution
None.

3.4.46 1051
Error loading facility name strings

Error ID
ERR_FACNAMELOADSTRING

Error name
FACNAMELOADSTRING

Cause
None.

Solution
None.

3.4.47 1052
Error loading error string.

118 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_ERRSTRLOADSTRING

Error name
ERRSTRLOADSTRING

Cause
The controller firmware or other subsystem generating this error is newer than the software used on the system
(for example, after a patch) or the software installation is in an inconsistent state.

Solution
Search for the real error information (error code) in the error message.

3.4.48 1053
Cannot display stream: stream not initiated.

Error ID
ERR_DSPNOSTRM

Error name
DSPNOSTRM

Cause
None.

Solution
None.

3.4.49 1054
Error loading stream dialog

Error ID
ERR_STRMLOADLIBRARY

Error name
STRMLOADLIBRARY

Cause
None.

Solution
None.

3.4.50 1055
Cannot execute function: stream not initiated.

119
3 ERROR CODES

Error ID
ERR_NOSTRM

Error name
NOSTRM

Cause
None.

Solution
None.

3.4.51 1056
Cannot stop: stream not initiated.

Error ID
ERR_STOPSTRMSTARTED

Error name
STOPSTRMSTARTED

Cause
None.

Solution
None.

3.4.52 1057
Error loading facility resource file.

Error ID
ERR_FACLOADLIB

Error name
FACLOADLIB

Cause
None.

Solution
None.

3.4.53 1058
Error opening log file: path may be invalid.

120 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_LOGFILE

Error name
LOGFILE

Cause
None.

Solution
None.

3.4.54 1059
Unspecified error obtaining SystemData information.

Error ID
ERR_SYSTEMDATAREG

Error name
SYSTEMDATAREG

Cause
None.

Solution
None.

3.4.55 1060
Error obtaining maximum number of error logs.

Error ID
ERR_NUMLOGFILES

Error name
NUMLOGFILES

Cause
None.

Solution
None.

3.4.56 1061
Error generating error log name.

121
3 ERROR CODES

Error ID
ERR_LOGFILENAME

Error name
LOGFILENAME

Cause
None.

Solution
None.

3.4.57 1062
Error obtaining maximum error log size.

Error ID
ERR_MAXLOGFILESIZE

Error name
MAXLOGFILESIZE

Cause
None.

Solution
None.

3.4.58 1063
Internal Error: Resource string ID out of range.

Error ID
ERR_CURRINDEX

Error name
CURRINDEX

Cause
None.

Solution
None.

3.4.59 1064
Internal Error: Resource string ID out of range.

122 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_INTSTGIDOOR

Error name
INTSTGIDOOR

Cause
None.

Solution
None.

3.4.60 1065
Error writing log string.

Error ID
ERR_WRITELOGSTG

Error name
WRITELOGSTG

Cause
None.

Solution
None.

3.4.61 1066
Error assigning ID: None available.

Error ID
ERR_NOIDSAVAIL

Error name
NOIDSAVAIL

Cause
None.

Solution
None.

3.4.62 1067
Log path error.

123
3 ERROR CODES

Error ID
ERR_LOGPATH

Error name
LOGPATH

Cause
Registry key/value okay, but path is invalid.

Solution
None.

3.4.63 1068
Cannot reserve the global extended error because it is already reserved.

Error ID
ERR_GLBERRINUSE

Error name
GLBERRINUSE

Cause
None.

Solution
None.

3.4.64 1069
This application's global extended error reservation has been overridden.

Error ID
ERR_GLBOVERRIDDEN

Error name
GLBOVERRIDDEN

Cause
None.

Solution
None.

3.4.65 1070
The TPSRESULT's X bit is set, but the global extended error has not been reserved: standard error reporting
will be used.

124 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_INVXBIT

Error name
INVXBIT

Cause
None.

Solution
None.

3.4.66 1071
The TPSRESULT's X bit is set, but the global extended error has not been configured: standard error reporting
will be used.

Error ID
ERR_INVEEO

Error name
INVEEO

Cause
None.

Solution
None.

3.4.67 1072
The input parameter representing the stream pointer is invalid.

Error ID
ERR_EHI_INVSTREAM

Error name
EHI_INVSTREAM

Cause
None.

Solution
None.

3.4.68 1073
The input parameter representing the max buffer size is too small.

125
3 ERROR CODES

Error ID
ERR_EHI_MAXBUFR

Error name
EHI_MAXBUFR

Cause
None.

Solution
None.

3.4.69 1074
The data would not all fit into the buffer provided.

Error ID
ERR_EHI_BUFROVRFLOW

Error name
EHI_BUFROVRFLOW

Cause
None.

Solution
None.

3.4.70 1075
The input parameter for the buffer is invalid.

Error ID
ERR_EHI_INVBFRPTR

Error name
EHI_INVBFRPTR

Cause
None.

Solution
None.

3.4.71 1076
The input parameter representing the max buffer size is invalid.

126 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_EHI_INVMAXBUFR

Error name
EHI_INVMAXBUFR

Cause
None.

Solution
None.

127
3 ERROR CODES

3.5 Codes 2001 to 2099

Related topics
“2001” on page 130
“2002” on page 130
“2003” on page 130
“2004” on page 131
“2005” on page 131
“2006” on page 131
“2007” on page 132
“2008” on page 132
“2009” on page 133
“2010” on page 133
“2011” on page 134
“2012” on page 134
“2013” on page 134
“2014” on page 135
“2015” on page 135
“2016” on page 135
“2017” on page 136
“2018” on page 136
“2019” on page 137
“2020” on page 137
“2021” on page 137
“2022” on page 138
“2023” on page 138
“2024” on page 138
“2025” on page 139
“2026” on page 139
“2027” on page 140
“2028” on page 140
“2029” on page 140
“2030” on page 141
“2031” on page 141
“2032” on page 141
“2033” on page 142
“2034” on page 142
“2035” on page 142
“2036” on page 143
“2037” on page 143
“2038” on page 143
“2039” on page 144
“2040” on page 144
“2041” on page 144
“2042” on page 145
“2043” on page 145
“2044” on page 145

128 www.honeywell.com
 3 ERROR CODES

“2045” on page 146

“2046” on page 146
“2047” on page 146
“2048” on page 147
“2049” on page 147
“2050” on page 148
“2051” on page 148
“2052” on page 149
“2053” on page 149
“2054” on page 149
“2055” on page 150
“2056” on page 150
“2057” on page 150
“2058” on page 151
“2059” on page 151
“2060” on page 151
“2061” on page 152
“2062” on page 152
“2063” on page 152
“2064” on page 153
“2065” on page 153
“2066” on page 153
“2067” on page 154
“2068” on page 154
“2069” on page 154
“2070” on page 155
“2071” on page 155
“2072” on page 155
“2073” on page 156
“2074” on page 156
“2075” on page 157
“2076” on page 157
“2077” on page 157
“2078” on page 158
“2079” on page 158
“2080” on page 158
“2081” on page 159
“2082” on page 159
“2083” on page 159
“2084” on page 160
“2085” on page 160
“2086” on page 160
“2087” on page 161
“2088” on page 161
“2089” on page 161
“2090” on page 162
“2091” on page 162
“2092” on page 163

129
3 ERROR CODES

“2093” on page 163

“2094” on page 163
“2095” on page 164
“2096” on page 164
“2097” on page 164
“2098” on page 165
“2099” on page 165

3.5.1 2001
Spare

Error ID
None.

Error name
None.

Cause
None.

Solution
None.

3.5.2 2002
<name>: Initialization Error

Error ID
CodeInitialization

Error name
Init Error

Cause
None.

Solution
None

3.5.3 2003
Internal warning indicating that a NULL requested connection reference was requested. <name>: Null
Connection Warning

Error ID
CodeNullConnectionWarning

130 www.honeywell.com
 3 ERROR CODES

Error name
Null Connect

Cause
If an inside connection is not configured, this default internal status indicator is used.

Solution
None.

3.5.4 2004
Indicates that an error occurs when an alias is used as an Alias Reference.
Indicates that an error occurs when an alias is used as an Alias

Error ID
CodeAliasIllegalAsAliasReference

Error name
IllegalAsAlias

Cause
An alias is placed inside an alias table.

Solution
Do not use alias within an alias table.

3.5.5 2005
Indicates that the requested value was clamped or modified before being stored. <name>: Value Clamped
Warning

Error ID
CodeValueClamped

Error name
ValClampWarn

Cause
Requested value exceeded allowable range or precision limits.

Solution
Optionally, the user can reissue the store with an allowable value.

3.5.6 2006
Indicates non-fatal failed store operation which can safely be ignored.

131
3 ERROR CODES

Error ID
CodeValueIgnored

Error name
ValIgnWarn

Cause
Varies depending on source. Can indicate a duplicate parameter store operation. <name>: Value Ignored
Warning

Solution
None.

3.5.7 2007
Indicates a user access level violation.

Error ID
CodeAccessLevelInvalid

Error name
InvalidAccess

Cause
Indicates that the user initiating the operation has insufficient access rights to perform the given operation.
<name>: Access Level Invalid

Solution
Check the accesslevel of the parameter to which the user is trying to write. If it is a program, then the parameter
can be changed only through program, for example, through step outputs.
In some cases, an access lock error indicates that this operation must be performed by a higher authority. Note
the following relationship with respect to access level permissions: ENGINEER -> SUPERVISOR ->
OPERATOR.

3.5.8 2008
Indicates that a special connector type known as a function block connection has been configured to a peer
block. <name>: Illegal Function Block Connection To Peer Block

Error ID
CodeIllegalFBConnToPeerBlock

Error name
PeerFBConnEr

Cause
By design, function block connections are not supported across peer to peer.

132 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.5.9 2009
Indicates an attempt to create an unknown block type. <name>: Invalid Block Type

Error ID
CodeInvalidBlockType

Error name
InvalBlkType

Cause
Possibilities include an internal error, incompatible versions of CPM and operating software, or reference to an
unknown Custom Control Library (CCL).
If this error occurs while loading blocks of a Custom Control Library, it is most likely a CCL installation
problem. The executable code for the controller model and release cannot be located or is corrupt.

Solution
Identify if the problem is due to one of the causes listed and take appropriate action.
For CCL related installation problem, try the following actions.
• carefully inspect the log output of the CCL installation script for errors,
• reinstall the CCL if unsure or if the log output cannot be found anymore, and
• check with the provider of the CCL that the controller model and firmware release is supported with this
CCL installation.

3.5.10 2010
Peer communications connection failure. <name>: Peer Connection Error

Error ID
CodePeerConnectionError

Error name
PeerConnect

Cause
Internal error or resource constraint in the CEE's processing of a peer connection.
If the problem can be clearly correlated with a Controller RAM Retention Restart, it is most likely an internal
problem of the block owning the connector in the Init Repower processing for that connection.

Solution
Ensure that system resources are not being exceeded. Contact Technical Assistance.
Problems after Controller RAM Retention Restart can be corrected only by some form of download for all
affected blocks (Load from Project, Monitoring or Restore Checkpoint).

133
3 ERROR CODES

3.5.11 2011
Internal Error: Indicates that an illegal or unknown instruction was encountered in the control module program.
<name>: Illegal Instruction in Control Module Program

Error ID
CodeIllegalInstructionError

Error name
Bad CM Instr

Cause
It is the proper behavior of the controller to reject the load after encountering an illegal instruction. It is not
expected that the user will encounter this error.

Solution
None. Contact Technical Assistance.

3.5.12 2012
Indicates that an illegal or unknown connection destination was encountered in the control module
configuration. <name>: Illegal or unknown connection destination

Error ID
CodeOutsideConnDestSevErr

Error name
Conn Dest Er

Cause
It is the proper behavior of the controller to reject the load after encountering an illegal connection. This error
relates only to CM 'outside' connections, where by definition, the destination must exist within the CM.

Solution
Ensure the validity of all connection destinations. Reload as necessary.

3.5.13 2013
Indicates that CM/SCM program failed during the loading of the component block type reference table. An
invalid index or invalid block type reference was detected. <name>: Component block type reference error

Error ID
CodeCompTypeRefError

Error name
Comp Type Er

134 www.honeywell.com
 3 ERROR CODES

Cause
This is the appropriate controller behavior. It indicates that the block is not supported in the taget controller or is
a possible indication of a problem in the control library software.

Solution
Check the compatibility of the block with the target controller. Check configuration, reload. Delete block and
rebuild a new copy. Contact Technical Assistance Center.

3.5.14 2014
Indicates an invalid request to change a parameter value. <name>: Change Not Permitted

Error ID
CodeChangeNotPermitted

Error name
ChngeNotPerm

Cause
This generic error is returned from several locations with varying meanings. It generally refers to an operation
which is prevented due to a check which is enforced by the block based upon the current state of mode of the
associated block, possibly enforced in conjunction with an access level check.

Solution
Varies. Must be assisted on a case by case basis. Ensure that current state(s) and/or modes describing the
associated basic block and/or container block permit the requested operation.

3.5.15 2015
Indicates a specific form of an access level problem. <name>: Change Not Permitted By Operator

Error ID
CodeChangeNotPermittedByOperator

Error name
InvalForOper

Cause
Usually indicates that OPERATOR access is invalid. May indicate that any human access is invalid.

Solution
Seek assistance of SUPERVISOR or ENGINEER access.

3.5.16 2016
Indicates that the checksum calculated on the receipt of a CM/SCM program does not equal the expected value.
<name>: Bad Checksum

135
3 ERROR CODES

Error ID
CodeChecksumBad

Error name
BadChecksum

Cause
Internal error, possibly data corruption during transport.

Solution
Attempt to reload. If problem persists, inform Honeywell TAC.

3.5.17 2017
Indicates that CM/SCM program load failed. <name>: CM Program Load Failed

Error ID
CodeCMProgramLoad

Error name
CMProgLdFail

Cause
This error is generally caused by the fact that the load operation has already failed and any pending program
store operations must be rejected.

Solution
Debug any other/earlier errors reported on the store thread. Resolution of such errors will alleviate this error as
well.

3.5.18 2018
Indicates that CM/SCM program failed during the loading of the tagged block reference table (TBREF). A null
entry was found in the table. <name>: NULL tagged block reference error

Error ID
CodeNullTBRefSevErr

Error name
Null TB Ref

Cause
This is the appropriate controller behavior. This is a possible indication of a problem in the control library
software. It is not expected that this error would be encountered by the user.

Solution
Check the configuration and reload. Delete block and rebuild a new copy. Ensure that all named connections
exist. Contact Technical Assistance.

136 www.honeywell.com
 3 ERROR CODES

3.5.19 2019
This error indicates that the requested configuration does not support the requested operation. <name>:
Configuration Mismatch Error

Error ID
CodeConfigurationMismatch

Error name
ConfigMismat

Cause
There are various causes for this error. One of the cause could be the following:
• Modifying the minimum or maximum value of the formula or report parameters of a Phase block instance.

Solution
Do not modify formula and report parameter limits of Phase block and data block instances. If you want to
modify the formula and report parameter limits, perform the following:
1. Use multiple Phase block types for different limits
2. Use limits at the destination parameter of formula parameters
3. Verify limits of report parameters when they are generated
4. Use multiple parameters in one Phase block type with different limits and enable only one of them
Check configuration and its intended operation.

3.5.20 2020
Indicates I/O output connection configuration error. <name>: Control Output Connection Contention Error

Error ID
CodeControlOutputConnectionNotConfigured

Error name
OpContention

Cause
None.

Solution
None.

3.5.21 2021
Indicates that an outstanding store request is pending at the current time. <name>: Control Request Pending
Error, Multiple Requests

Error ID
CodeControlReqPending

137
3 ERROR CODES

Error name
ReqPending

Cause
None.

Solution
None.

3.5.22 2022
Control request was rejected. <name>: Control Request Rejection

Error ID
CodeControlReqRejection

Error name
RequestReject

Cause
None.

Solution
None.

3.5.23 2023
Indicates invalid data type information. <name>: Data Type Error

Error ID
CodeDataType

Error name
DataTypeErr

Cause
Likely to be caused by an attempted connection between invalid data type.

Solution
Check configuration for invalid connections.

3.5.24 2024
Indicates that the referenced parameter is a configuration parameter and therefore cannot be changed without
reloading. <name>: Configuration parameters cannot be changed.

Error ID
CodeConfigParamsCantBeChanged

138 www.honeywell.com
 3 ERROR CODES

Error name
Config Param

Cause
This is the intended operation of the block.

Solution
Reconfigure and reload block

3.5.25 2025
Indicates that the requested limit spans too small a range of values. <name>: Engr Unit Span Too Small

Error ID
CodeEngrUnitSpanTooSmall

Error name
SpanTooSmall

Cause
Range limits for the analog block algorithms impose a constraint to ensure that there is a minimum span
between the minimum and maximum EU limits thus ensuring proper behavior of the algorithm.

Solution
Raise or lower the range limits as appropriate.

3.5.26 2026
Indicates that the EXECSTATE parameter of an SCM, RCM, ACT, or MR block is read-only. It is provided
only for compatibility with the application and tools which read the parameter for all types of container
modules. However, it is different for a CM or an UCM where the EXECSTATE parameter needs to be changed
for activation and inactivation.

Error ID
CodeExecstateNotApplicabletoSCM

Error name
Execstat N/A

Cause
An operation was performed to write to the parameter and the change was rejected. This is the intended
operation of the block.

Solution
SCM, RCM, ACT, or MR has the SCMSTATE and SCMCOMMAND parameters to view and command their
state.

139
3 ERROR CODES

3.5.27 2027
Parameter cannot be changed when external mode switching is enabled. <name>: External Mode Switching
Enabled.

Error ID
CodeExternalModeSwitchingEnabled

Error name
ExtModeSwEnb

Cause
User cannot change mode if external mode switching is enabled and one of the external mode switch flags is on.

Solution
Resolve external mode condition

3.5.28 2028
Data types of source and destination parameters must match.

Error ID
CodeCMDataTypeSevErr

Error name
ConnDataType

Cause
It is the intended operation of the Control Module to enforce a data-type check on all 'outside' connections.

Solution
None

3.5.29 2029
Data types of source and destination parameters must match and also must not exceed the maximum
transportable size. Parameters which support intimate transfer must be of exactly 1, 2, 4, or 8 byte size. <name>:
CM connection data size error

Error ID
CodeCMDataSizeSevErr

Error name
ConnDataSize

Cause
It is the intended operation of the Control Module to enforce a data-size check on all 'outside' connections.

140 www.honeywell.com
 3 ERROR CODES

Solution
None

3.5.30 2030
The function block cannot be changed when in the alarm state. <name>: FB In Alarm

Error ID
CodeFbInAlarm

Error name
InAlarm

Cause
For Regulatory Control blocks, this error indicates that Bad Control flag is set and block has shed its output.

Solution
Determine and resolve the source of the alarm condition.

3.5.31 2031
Store operation failed because FB Local Manual condition is set. <name>: FB Is Local Manual

Error ID
CodeFbIsLocalManual

Error name
LocalMan

Cause
Safety Interlock is Active.

Solution
Safety Interlock must be deactivated.

3.5.32 2032
nvalid operation when Red Tag attribute is set. <name>: FB Is Red Tagged

Error ID
CodeFbIsRedTagged

Error name
RedTag

Cause
Red Tag attribute is set.

141
3 ERROR CODES

Solution
Resolve Red Tag condition

3.5.33 2033
<name>: FB Is Shutdown

Error ID
CodeFbIsShutdown

Error name
Shutdown

Cause
None.

Solution
None.

3.5.34 2034
Indicates function block is in an invalid state. <name>: FB Must Be Inactive

Error ID
CodeFbMustBeInactive

Error name
NotInactive

Cause
Operation requires that the block is in the INACTIVE state.

Solution
Inactivate block and retry operation.

3.5.35 2035
Indicates function block is in an invalid state. <name>: FB Must Be Inactive Or CEE Idle

Error ID
CodeFbMustBeInactiveOrIdle

Error name
NotInact/Idle

Cause
Operation requires that the block is INACTIVE or the CEE is IDLE.

142 www.honeywell.com
 3 ERROR CODES

Solution
Inactivate block or idle CEE and retry operation.

3.5.36 2036
Indicates that an internal operation has failed. <name>: Function Not Implemented

Error ID
CodeFunctionNotImplemented

Error name
FcnNotImpl

Cause
Various causes - possibly an illegal connection.

Solution
Ensure proper configuration.

3.5.37 2037
Indicates an illegal or invalid value. <name>: Illegal value

Error ID
CodeIllegalValue

Error name
IllegalValue

Cause
If the requested value is out of range, this error will be returned. In the case of an invalid value, the current state
of the block may not permit the store of the requested value.

Solution
Ensure that requested value is legal and that block allows change in current state.

3.5.38 2038
Illogical internal condition has caused this error condition to occur.

Error ID
CodeImpossibleError

Error name
ImpossibleError

Cause
None known, except possible memory corruption.

143
3 ERROR CODES

Solution
None. Contact Technical Assistance.

3.5.39 2039
Parameter or Variable Type not known to CPM. <name>: Parameter Type Invalid

Error ID
CodeVariableTypeInvalid

Error name
InvalidType

Cause
Possibly due to incompatible operating system and CPM software versions.

Solution
Ensure software compatibility. Contact Technical Assistance.

3.5.40 2040
Invalid connection; failed to validate the interface between blocks (method invocation). <name>: Interface
Validation Failed

Error ID
CodeInterfaceValidation

Error name
InvalInterfc

Cause
Illogical condition indicates an invalid connection or an internal error.

Solution
Ensure proper connections.

3.5.41 2041
Indicates an illegal operation due to an interlock condition. <name>: Interlock Error

Error ID
CodeInterlock

Error name
InterlockErr

Cause
Block interlock logic prevents requested operation.

144 www.honeywell.com
 3 ERROR CODES

Solution
Resolve interlock condition and repeat operation.

3.5.42 2042
Invalid Algorithm Equation Selected. <name>: Invalid Algorithm Equation.

Error ID
CodeInvalidAlgorithmEquation

Error name
InvalidEqn

Cause
The selected equation type is not supported by this block type.

Solution
Select an algorithm equation type that is supported by the respective block type.

3.5.43 2043
Indicates an invalid request for data access received by CPM. <name>: Invalid CDA/CK Function ID

Error ID
CodeInvalidCDACKFunctionID

Error name
InvalidFcnID

Cause
This is an illogical condition. Possible causes include:
1. data corruption in transport layers,
2. incompatible NT and CPM software.

Solution
Ensure compatible software versions; Contact Technical Assistance.

3.5.44 2044
Reference to an invalid or NULL dependent block. <name>: Invalid Dependent Block Connection Reference

Error ID
CodeNullDependentBlockRefErr

Error name
InvalConRef

145
3 ERROR CODES

Cause
The internal name form of the referenced block has a NULL Dependent Object Code (DOC). This error should
not be encountered by the user under normal circumstances.

Solution
Ensure database integrity and reload affected blocks if possible. Contact Technical Assistance.

3.5.45 2045
Spare

Error ID
Spare

Error name
Spare

Cause
Spare

Solution
Spare

3.5.46 2046
Indicates that the specified operation is not valid on the secondary CPM. <name>: Invalid operation for
secondary CPM

Error ID
CodeInvalidForSecondaryCPM

Error name
InvalFor2nd

Cause
This protection attribute indicates an invalid user operation. Parameter get and store requests to the secondary
CPM are invalid unless they are destined for the CPM function block. Only the primary CPM can supply
process related data from the currently loaded user database and function blocks.

Solution
None.

3.5.47 2047
Invalid parameter index.

Error ID
CodeInvalidIndex

146 www.honeywell.com
 3 ERROR CODES

Error name
InvalidIndex

Cause
You have attempted to access an array parameter with an index outside the allowed range for that array. Most
typical examples are:
• display data access
• OPC data access
• runtime computed indexes in expressions
• connections to indexed parameters

Solution
Make sure that data access uses indexes within valid index ranges. Be aware that some index ranges depend on
configuration and/or could potentially change at runtime.
Note that single occurence of this error is harmless if the data access client can handle the error. However,
massive attempts to read or write array data outside the valid index range will create stress on the system and
shall be avoided.

3.5.48 2048
Selected mode is invalid.

Error ID
CodeInvalidMode

Error name
InvalidMode

Cause
Varies with block type. May indicate an illegal value for the respective current state of block.

Solution
Ensure proper value is selected.

3.5.49 2049
Indicates that the current value of the mode attribute parameter MODEATTR invalidated the requested
operation.

Error ID
CodeInvalidModeAttribute

Error name
InvalModattr

Cause
Certain operations such as the change of the current Mode can only be executed by the entity identified by the
MODEATTR parameter.

147
3 ERROR CODES

Solution
Change MODEATTR parameter as necessary; repeat operation.

3.5.50 2050
I/O channel to I/O module connection warning.

Error ID
CodeCouldNotLocateAssociatedIOMWarn

Error name
IOM NotFound

Cause
This error can be caused by one of the following:
1. The IOC has not been associated with an IOM.
2. The associated IOM has not been loaded.
3. The IOM has been deleted.
The user will encounter this warning when activating a CM which contains an I/O channel which cannot locate
its associated IOM.

Solution
Resolve the above condition; reload CM and/or IOM as necessary.

3.5.51 2051
I/O channel to I/O module connection error.

Error ID
CodeCannotLocateAssociatedIOMErr

Error name
IOM NotFound

Cause
This error can be caused by one of the following:
1. The IOC has not been associated with an IOM.
2. The associated IOM has not been loaded.
3. The IOM has been deleted.
The user will encounter this warning when activating a CM which contains an I/O channel which cannot locate
its associated IOM.

Solution
Resolve the above condition; reload CM and/or IOM as necessary.

148 www.honeywell.com
 3 ERROR CODES

3.5.52 2052
The physical IOM card referenced by the IOM function block is either physically not present in the correct
location or cannot communicate.

Error ID
CodeIOMCardIsMissingOrNotAvailErr

Error name
IOMcardErr

Cause
This condition is generally encountered when an IOM function block is activated when no physical module
exists at the specified location.

Solution
Ensure that the physical IOM device exists at the specified location.

3.5.53 2053
The size of the IOM Module Entry configuration data is invalid.

Error ID
CodeIOMInvalidModEntryDataSizeErr

Error name
IOMDataSizeErr

Cause
This condition can only happen as a result of coding error and should not be user visible.

Solution
None.

3.5.54 2054
Operation requested is invalid or not supported.

Error ID
CodeInvalidOperation

Error name
InvalOperation

Cause
Varies with application.

149
3 ERROR CODES

Solution
Ensure that requested operation is supported.

3.5.55 2055
Indicates that the block is in a state which does not support the intended operation.

Error ID
CodeInvalidState

Error name
InvalidState

Cause
Varies with block type.

Solution
Ensure that block state supports intended operation.

3.5.56 2056
Indicates an invalid state for the target value processor.

Error ID
CodeInvalidTargetValueProcessorState

Error name
TVPstateErr

Cause
None.

Solution
None.

3.5.57 2057
Indicates a limit or range error on the requested parameter value.

Error ID
CodeLimitOrRangeCrossover

Error name
RangeXover

Cause
Range limits are enforced by the parameter store processing.

150 www.honeywell.com
 3 ERROR CODES

Solution
Change requested value to correct range.

3.5.58 2058
Indicates a limit or range error on the requested parameter value.

Error ID
CodeLimitOrRangeExceeded

Error name
RangeLimitEr

Cause
Range limits are enforced by the parameter store processing.

Solution
Change requested value to correct range.

3.5.59 2059
Indicates that the CEE has insufficient memory to support the operation.

Error ID
CodeInsufficientMemoryAvailableInCEE

Error name
InsufMemory

Cause
Usually caused during a load operation when CEE memory limits are reached.

Solution
Delete any unused or unnecessary blocks to free memory; attempt to reload desired block(s). Note that is
recommended that blocks are loaded individually (rather than in groups) when working at or near the CPM
memory limits. See FREEMEM and USEDMEM parameter descriptions of the CPM block.

3.5.60 2060
<name>: Maximum Available User Memory Exceeded

Error ID
CodeMaxAvailableUserMemoryExceeded <name>: Maximum Available User Memory Exceeded

Error name
MemExceeded

151
3 ERROR CODES

Cause
None.

Solution
None.

3.5.61 2061
NSTRING * STRLEN determines the total number of characters for the strings. This product cannot exceed 64.

Error ID
CodeNStringStrLenConfigOfMoreThan64Chars

Error name
NStrStrLX64

Cause
Configuration values of NSTRING and STRLEN.

Solution
You must re-configure NSTRING and STRLEN to use at most 64 characters.

3.5.62 2062
The Serial Interface Module has not been able to keep up with the amount of writes from an assigned Serial
Interface Array Channel block. Further writes from this Channel block will not be possible until the Serial
Interface Module catches up.

Error ID
CodeSimIomOverloadWriteError

Error name
SimIomOvrld

Cause
Writes capacity of the Serial Interface Module / FTA have been exceeded.

Solution
Try the write some time later, after the overload has cleared.

3.5.63 2063
Indicates a condition where the block is not in manual mode, or the block is not INACTIVE, or the CEE is not
in the IDLE state.

Error ID
CodeModeNotManOrFbActive

152 www.honeywell.com
 3 ERROR CODES

Error name
NotManOrIntv

Cause
By design, a subset of the Regulatory block parameters requires that store cannot be executed unless the mode is
manual or the block is not currently executing.

Solution
Transition block into manual mode and/or inactivate the block.

3.5.64 2064
The current ModeTrack Option does not allow the Operator to take over control of the device from the SCM.

Error ID
CodeModeTrackOptionProhibitsChange

Error name
ModTrkProChg

Cause
Current ModeTrack Option value.

Solution
Either change the ModeTrack Option (Engineer access lock), or put the SCM into Manual Mode.

3.5.65 2065
Indicates that the block's normal mode attribute parameter MODEATTR is not configured.

Error ID
CodeNormalAttributeNotConfigured

Error name
NormAttrErr

Cause
Configuration error.

Solution
Reconfigure and reload.

3.5.66 2066
Indicates that the block's normal mode parameter MODEATTR is not configured.

Error ID
CodeNormalModeIsNotConfigured

153
3 ERROR CODES

Error name
NormModeErr

Cause
Configuration Error.

Solution
Reconfigure and reload.

3.5.67 2067
The Serial Interface IOM FB buffer for write requests is full, so additional writes cannot be made. The buffer is
allocated on a per Channel basis.

Error ID
CodeSimFbReqBufferOverflowError

Error name
SimFbRqBfOvr

Cause
More writes have been requested than can be processed by the Serial Interface IOM FB

Solution
Try the write some time later, after the overflow has gone away.

3.5.68 2068
The Serial Interface Array Channel FB is receiving an unexpected DataConditioner from the SI IOM / FTA. The
DataConditioner tells the Serial Interface Array Channel FB how to interpret the block of data imaged from the
serial device.

Error ID
CodeSimInvalidDataConditioner

Error name
InvDataCond

Cause
The serial device data block mapped to the Serial Array Channel FB does not match. For example, Boolean
device data should be configured with the Serial Interface Flag Array Channel (SIFLAGARRCH) FB.

Solution
Check the configuration and make the necessary corrections.

3.5.69 2069
Indicates that the operation has failed due to the action of the permissive interlock.

154 www.honeywell.com
 3 ERROR CODES

Error ID
CodePermissive

Error name
PermInterlok

Cause
This is the proper functioning of the permissive interlock mechanism.

Solution
Clear permissive interlock condition; repeat operation.

3.5.70 2070
NSTRING * STRLEN determines the total number of characters for the strings. For the TextArray FB, this
product cannot exceed 960.

Error ID
CodeTArrNStringStrLenConfigExceedsMax

Error name
NStrStrLXMax

Cause
Configuration values of NSTRING and STRLEN.

Solution
None - you must re-configure NSTRING and STRLEN to use at most 960 characters.

3.5.71 2071
Indicates that the PV source is invalid.

Error ID
CodePvSourceInvalid

Error name
PvSourceErr

Cause
This is the proper functioning of the respective block type.

Solution
Ensure that operation is compatible with the PV source.

3.5.72 2072
Indicates that the parameter is read-only and cannot be changed.

155
3 ERROR CODES

Error ID
CodeReadOnlyVariable

Error name
ReadOnlyPar

Cause
By design, many block parameters, including many internal parameters, have this characteristic.

Solution
None.

3.5.73 2073
Internal warning. <name>: Referenced Block Not Found Warning

Error ID
CodeReferencedFBNotFound

Error name
RefNotFound

Cause
Used by CPM connection binding functionality to indicate when the referenced block does not yet exist. Note
that it is legitimate for currently loaded blocks to have references (connections) to blocks which have not yet
been loaded.

Solution
None.

3.5.74 2074
This internal error indicates that an operation must be retried.

Error ID
CodeRetry

Error name
Retry

Cause
Varies with application. Usually indicates a temporary resource constraint possibly due to resource contention.
Retry errors are normally encountered during reload scenarios as the connections attempt to rebind.

Solution
None.

156 www.honeywell.com
 3 ERROR CODES

3.5.75 2075
Indicates that the operation failed to the function of the SCM Option.

Error ID
CodeScmOption

Error name
SCMOptErr

Cause
This the proper functioning of the SCM option.

Solution
Ensure that requested operation is compatible with current SCM option.

3.5.76 2076
Indicates that the operation failed because the Serial Interface IOM FB is currently Inactive.

Error ID
CodeSimFbInactiveOperationCannotBeCompleted

Error name
SimFbInctv

Cause
EXECSTATE of Serial Interface IOM FB is currently Inactive.

Solution
Activate the Serial Interface IOM FB.

3.5.77 2077
CPM load and delete operations and the CPM shutdown command are rejected unless all IOM's are inactivated.

Error ID
CodeAllIOMsMustBeInactive

Error name
IOM Active

Cause
The described operations will cause a loss of the currently loaded controller database. Therefore as a precaution.
before such operations are initiated, all I/O must be inactivated by the user.

157
3 ERROR CODES

Solution
None.

3.5.78 2078
Indicates that the operation is prevented if the CEESTATE is not in IDLE.

Error ID
CodeCeeStateMustBeIdle

Error name
CEENotInIdle

Cause
Certain operations such as shutdown and CPM reload require this check as a protection attribute.

Solution
None.

3.5.79 2079
Invalid operation - The CEE must be in the running state in order to complete this operation.

Error ID
CodeCeeStateMustBeRun

Error name
CEENotInRun

Cause
An operation was performed on the parameter that requires the CEE to be in the running state.

Solution
Change the CEE state to run and retry the operation.

3.5.80 2080
Indicates that a change to the specified parameter is invalid if target value processing is not enabled.

Error ID
CodeTargetValueProcessingNotEnabled

Error name
TVProcNotEnb

Cause
This is the proper behavior of target value processing functionality.

158 www.honeywell.com
 3 ERROR CODES

Solution
Enable target value processing if applicable.

3.5.81 2081
The Serial Interface Array Channel FB ErrFl is on, which indicates that there is a communication problem with
the Serial Interface IO This error is returned on attempted Reads and Writes of the array (PV[], PVFL[], STR[]
for Numeric, Flag, String data types respectively to inform the requestor that there is a problem.

Error ID
CodeSimArrayChannelErrFlIsOn

Error name
SIArrCErrFl

Cause
Look at the Serial Interface Array Channel FB ERRCODE for more detailed information.

Solution
None; the communication problem needs to be resolved

3.5.82 2082
Indicates that the timer command operation failed due to state of timer command flags.

Error ID
CodeTimerCommandInvalidDueToCommandFlags

Error name
Tmr Cmd Flag

Cause
The state of one or more of the following flags prevented the operation:
RESETFL,
STOPFL,
RESTARTFL

Solution
None.

3.5.83 2083
Indicates that the timer has not been reset and/or stopped from a previous operation.

Error ID
CodeTimerNotResetPreviously

159
3 ERROR CODES

Error name
Not Reset

Cause
Certain operations, such as the start command, are not accepted if the timer has not been stopped and reset.

Solution
Stop and/or Reset timer and repeat operation.

3.5.84 2084
Indicates that the operation is invalid when the timer is not currently running.

Error ID
CodeTimerNotRunning

Error name
Not Running

Cause
Certain operations, such as the stop command, are not accepted if the timer is not running.

Solution
Ensure that timer is running and repeat the operation.

3.5.85 2085
Indicates that the timer has not been stopped from a previous timing operation.

Error ID
CodeTimerNotStoppedPreviously

Error name
Not Stopped

Cause
Certain operations, such as the restart command, are not accepted if the timer has not been stopped.

Solution
Stop timer and repeat operation.

3.5.86 2086
Indicates that the timer setpoint is out of range for selected timebase.

Error ID
CodeTimerSpOutOfRangeForSelectedTimeBase

160 www.honeywell.com
 3 ERROR CODES

Error name
SpOutofRange

Cause
Maximum allowable timer SP depends on configured timebase. For secs Max SP is 4294947 For mins Max SP
is 71581, for cycles Max SP is 2147483637.

Solution
Select SP in range for configured timebase.

3.5.87 2087
Indicates that the parameter cannot be changed.

Error ID
CodeVariableCanNotBeChanged

Error name
CannotChange

Cause
Varies with many uses. Generally indicates that the current state of the block does not allow the operation.

Solution
None.

3.5.88 2088
Indicates that the specified parameter was translated into a numerical identifier which was not known by the
CEE software. Under ordinary circumstances, this error is not encountered by the user.

Error ID
CodeVariableId

Error name
ParamIdError

Cause
Parameter names are not known by the CEE; all parameter names are mapped into numerical codes. The CEE
software has received a code that it does not have knowledge of. Possibly due to incompatible software
versions.

Solution
Ensure compatible software versions.

3.5.89 2089
Indicates an inappropriate or invalid parameter or parameter value.

161
3 ERROR CODES

Error ID
CodeVariableInvalid

Error name
InvalidParam

Cause
Varies with usage.

Solution
Investigate parameter name, usage and legal values. Contact TAC if necessary.

3.5.90 2090
Indicates an inappropriate or invalid parameter or parameter value. This error (#2090) means the same to the
user as error #2089. This error is for a special purpose - Control Library ignores this error on Upload/Snapshot
operations.

Error ID
CodeVariableInvalidIgnoreOnUpload

Error name
InvldParamIU

Cause
Varies with usage.

Solution
Investigate parameter name, usage and legal values. Contact Technical Assistance if necessary.

3.5.91 2091
The configured AUTOPERIOD value of the CHGEXEC instance is inconsistent with the PERIOD
configuration of the parent Control Module.
Indicates that an instance of the CHGEXEC block has a value of AUTOPERIOD which is inconsistent with the
value of PERIOD on the parent CM. AUTOPERIOD must be greater than CM.PERIOD and must be an integer
multiple of CM.PERIOD.

Error ID
CodeInconsistentAutoPeriod

Error name
InconsistentAutoPeriod

Cause
Inconsistent configuration between the AUTOPERIOD parameter of the CHGEXEC block and the PERIOD
parameter of the parent CM block.

162 www.honeywell.com
 3 ERROR CODES

Solution
Change CHGEXEC.AUTOPERIOD or CM.PERIOD to make them consistent.

3.5.92 2092
An attempt was made to activate or to change the selected instance of the alias table of an SCM or RCM before
an alias table load had completed.

Error ID
CodeATLoadInProgress

Error name
ATLoadInProgress

Cause
An attempt was made to activate or change instance selection of an alias table when parameter ATLOADSTATE
was not at value COMPLETE.

Solution
Wait for the alias table load to complete. Or, if the load operation has hung without failing, start the load over
again. Once the table load has completed, retry the desired action.

3.5.93 2093
Indicates an invalid request to change the Device Control's SEALOPT or MOMSTATE parameters, which are
mutually exclusive. Thus, SEALOPT cannot be enabled when MOMSTATE is not equal to NONE, and
MOMSTATE cannot be set to a state other than NONE when SEALOPT is enabled.

Error ID
CodeSealoptAndMomstateAreMutuallyExclusive

Error name
SealMomExcl

Cause
This is the intended operation of the Device Control block.

Solution
Ensure that requested values for SEALOPT and MOMSTATE are compatible based on the exclusivity
relationship desired.

3.5.94 2094
Indicates an internal error in the CK memory manager.

Error ID
CodeCKInternalMemoryManager

163
3 ERROR CODES

Error name
MemManIntErr

Cause
Usually caused by unexpected errors on the memory allocation process.

Solution
None. Contact Technical Assistance.

3.5.95 2095
Indicates an unexpected size error encountered in the loading of the CM/SCM program data.

Error ID
CodeUnexpectedZeroProgramSize

Error name
ZeroProgSz

Cause
This error should not be encountered. If encountered it is likely due to an internal error in generating the
CM/SCM program in the Control Builder (Control Library).

Solution
A possible Workaround is to delete the CM/SCM, completely rebuild it manually, and attempt to reload. Contact
Technical Assistance.

3.5.96 2096
Indicates that an internal resource limit has been reached within the CPM. This indicates that the CPM is being
loaded above its specified capacity of independent blocks and/or number of peer connections.

Error ID
CodeNoTBDescriptors

Error name
TBRefLimit

Cause
The number of independent blocks in the CEE plus the number of remote (peer) block references made from
within this CEE has exceeded the maximum of 1280.

Solution
Delete any unused or unnecessary blocks. Delete any unused or unnecessary remote (peer) references. Ensure
that CEE/CPM capacity limits are not being exceeded.

3.5.97 2097
Internal error.

164 www.honeywell.com
 3 ERROR CODES

Error ID
CodeDoNotDestroy

Error name
DoNotDestroy

Cause
This error is passed internal to CK/CF to indicate a specific block type which is preserved through a reload
operation, rather than destroyed and re-created.

Solution
None.

3.5.98 2098
IO: No Map Instance: <name>

Error ID
CodeNoMapInstance

Error name
NoIoMapInst

Cause
You may encounter this error while reloading/activating an IO module.

Solution
Delete the IO module from the Monitoring view and load it again from the Project view.

3.5.99 2099
<name>: IO No Asm Instance

Error ID
CodeNoAsmInstance

Error name
NoAsmInst

Cause
None.

Solution
None.

165
3 ERROR CODES

3.6 Codes 2100 to 2199

Related topics
“2100” on page 168
“2101” on page 168
“2102” on page 168
“2103” on page 169
“2104” on page 169
“2105” on page 169
“2106” on page 170
“2107” on page 170
“2108” on page 170
“2109” on page 171
“2110” on page 171
“2111” on page 172
“2112” on page 172
“2113” on page 172
“2114” on page 173
“2115” on page 173
“2116” on page 173
“2117” on page 174
“2118” on page 174
“2119” on page 174
“2120” on page 175
“2121” on page 175
“2122” on page 175
“2123” on page 176
“2124” on page 176
“2125” on page 177
“2126” on page 177
“2127” on page 177
“2128” on page 178
“2129” on page 178
“2130” on page 178
“2131” on page 179
“2132” on page 179
“2133” on page 179
“2134” on page 180
“2135” on page 180
“2136” on page 180
“2137” on page 181
“2138” on page 181
“2139” on page 181
“2140” on page 182
“2141” on page 182
“2142” on page 182
“2143” on page 183

166 www.honeywell.com
 3 ERROR CODES

“2144” on page 183

“2145” on page 184
“2146” on page 184
“2147” on page 184
“2148” on page 185
“2149” on page 185
“2150” on page 185
“2151” on page 186
“2152” on page 186
“2153” on page 186
“2154” on page 187
“2155” on page 187
“2156” on page 187
“2157” on page 188
“2158” on page 188
“2159” on page 188
“2160” on page 189
“2161” on page 189
“2162” on page 190
“2163” on page 190
“2164” on page 190
“2165” on page 191
“2166” on page 191
“2167” on page 191
“2168” on page 192
“2169” on page 192
“2170” on page 192
“2171” on page 193
“2172” on page 193
“2173” on page 194
“2174” on page 194
“2175” on page 194
“2176” on page 195
“2177” on page 195
“2178” on page 195
“2179” on page 196
“2180” on page 196
“2181” on page 196
“2182” on page 197
“2183” on page 197
“2184” on page 197
“2185” on page 198
“2186” on page 198
“2187” on page 198
“2188” on page 199
“2189” on page 199
“2190” on page 199
“2191” on page 200

167
3 ERROR CODES

“2194” on page 200

“2195” on page 200
“2196” on page 201
“2198” on page 201
“2199” on page 202

3.6.1 2100
I/O Add Module Failed.

Error ID
CodeAddModuleFailed

Error name
IOAdModErr

Cause
None.

Solution
None.

3.6.2 2101
I/O Remove Module Failed.

Error ID
CodeRemoveModuleFailed

Error name
IORemModErr

Cause
None.

Solution
None.

3.6.3 2102
I/O Add Connection Failed

Error ID
CodeAddConnectionFailed

Error name
IOAddConnErr

168 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.6.4 2103
I/O Remove Connection Failed

Error ID
CodeRemoveConnectionFailed

Error name
IORemConnErr

Cause
None.

Solution
None.

3.6.5 2104
I/O Get Module Failed

Error ID
CodeGetModuleFailed

Error name
IOGetModErr

Cause
None.

Solution
None.

3.6.6 2105
I/O Get Connection Failed

Error ID
CodeGetConnectionFailed

Error name
IOGetConnErr

169
3 ERROR CODES

Cause
None.

Solution
None.

3.6.7 2106
I/O Get Stati Failed

Error ID
CodeGetStatiFailed

Error name
IOGetStatiEr

Cause
None.

Solution
None

3.6.8 2107
I/O Module Data Incompatible

Error ID
CodeModuleDataIncompatible

Error name
IODataErr

Cause
None.

Solution
None.

3.6.9 2108
Indicates that peer connection data resource limits have been reached.

Error ID
CodePeerConnectionResourceUnavailable

Error name
PeerConnErr

170 www.honeywell.com
 3 ERROR CODES

Cause
Generally indicates a CK/CDA shared memory resource limitation. The error occurs when too many peer write
requests happen concurrently in the same CEE.

Solution
Ensure that peer communication throughput is within specified limits.
Attempt to distribute bursts of the concurrent write operations (for example, by Push blocks, SCM step outputs
or RCM phase block formula parameters) over some time.
For SCM step outputs, the parameter ENFORCESEQ may provide a simple workaround.
For RCMs and Master Recipes, some artificial delays before or after phases in parallel sections may be
required.
Note:The error does not occur in all blocks and/or parameters being involved in the scenario. It occurs only on
the subset which could not be served on time. When the scenario is repeated, the error may not occur on the
same subset of blocks. Therefore the workaround attempts are not restricted to those blocks, where the error has
been observed. All the strategies performing peer write operations in the CEE shall be taken into consideration.

3.6.10 2109
This error should not be encountered. The error indicates the inability for a block to locate its auxiliary memory
allocation associated with a given parameter.

Error ID
CodeAuxMemoryAllocationNotFound

Error name
AuxMemNotFnd

Cause
It's likely that an internal error caused the condition.

Solution
Attempt to reconfigure and reload the affected block. Contact Technical Assistance.

3.6.11 2110
Selected Step has a serious configuration problem; the Step's CONFIGSTS is equal to or worse than 'Fail'. Look
at CONFIGCODE to diagnose the problem. Steps with serious configuration problems cannot be selected.

Error ID
CodeSelectedStepHasConfigProblem

Error name
StepCnfgFail

Cause
Configuration problem in Step.

Solution
Fix the configuration problem, and then try again.

171
3 ERROR CODES

3.6.12 2111
Invalid I/O Communication Path

Error ID
CodeInvalidCommPath <name>: Invalid IO Communication Path

Error name
InvalIoComm

Cause
None.

Solution
None.

3.6.13 2112
Error in the IOM's inability to deregister from CK scheduler.

Error ID
CodeIOMFBUnregisterFailed

Error name
IODeRegErr

Cause
Internal Error. Should not be encountered.

Solution
Attempt a reload. Contact Technical Assistance.

3.6.14 2113
Error in the CM/SCM/s ability to deregister from the CK scheduler.

Error ID
CodeXCMFBUnregisterFailed

Error name
SchdDeRegErr

Cause
Internal error. Should not be encountered.

Solution
Attempt a reload. Contact Technical Assistance.

172 www.honeywell.com
 3 ERROR CODES

3.6.15 2114
Indicates an error in the ability to register the IOM with the CK scheduler.

Error ID
CodeIOMFBRegisterFailed

Error name
IORegFail

Cause
This error is likely to be due to an internal resource limitation.

Solution
Ensure that CPM is not operating above specified capacity limits.

3.6.16 2115
Indicates an error in the ability to register the CM/SCM with the CK scheduler.

Error ID
CodeXCMFBRegisterFailed

Error name
SchdRegFail

Cause
Likely due to an internal resource limitation.

Solution
Ensure that CPM is not operating above specified capacity limits.

3.6.17 2116
Indicates that the CEE block is not currently loaded to the controller.

Error ID
CodeCEEFBNotLoaded

Error name
CeeNotLoaded

Cause
Certain operations such as load of a CM, SCM or IOM or commanding a CEE state transition cannot be
initiated until after the CEE block has been loaded. Note that if the CEE appears not loaded after a temporary
power outage, this is an indication that the database was not retained across the outage.

173
3 ERROR CODES

Solution
Ensure that the CEE block has been loaded before retrying the operation.

3.6.18 2117
Indicates that the CPM block is not currently loaded to the controller.

Error ID
CodePCMFBNotLoaded

Error name
CpmNotLoaded

Cause
Certain operations such as load of a CEE, CM, SCM or IOM cannot be initiated until after the CPM block has
loaded.

Solution
Ensure that the CPM block has been loaded before retrying the operation.

3.6.19 2118
Indicates that an invalid operation has been attempted on a function block.

Error ID
CodeMethodNotSupportedOnBlock

Error name
Invalid Fcn

Cause
Certain operations can be performed on certain block types only. An Event Regeneration command, for
example, can be issued on the CEE block only.

Solution
None.

3.6.20 2119
Indicates that an Independent Block Code (IBC) received by the CEE is out of range.

Error ID
CodeIOCOutOfRange

Error name
IBC RangeErr

174 www.honeywell.com
 3 ERROR CODES

Cause
This error should not be encountered by the user. If encountered, it is likely due to an internal error.

Solution
Contact Technical Assistance.

3.6.21 2120
Indicates resource limit or size error encountered in the loading of the CM/SCM program data.

Error ID
CodeXMPMemoryExceededExpectation

Error name
ExcessvPrgSz

Cause
This error is unlikely to be encountered. It is likely due to an internal error in generating the CM/SCM program
in the Control Builder (Control Library).

Solution
A possible Workaround is to break the CM/SCM up into smaller CMs/SCMs, and attempt to reload. Contact
Technical Assistance.

3.6.22 2121
The expression p-code format cannot be read by the user.

Error ID
CodeGetExprPCodeNotImplemented

Error name
CantReadPcode

Cause
Binary p-code syntax is for internal use only.

Solution
None.

3.6.23 2122
Indicates that the previous load operation on the associated block did not complete successfully.

Error ID
CodeBlockLoadDidNotComplete

175
3 ERROR CODES

Error name
BlknotLoaded

Cause
Generally caused by fatal load errors on last load operation. In some cases, the block is not supported in the
target controller, but a load was attempted.

Solution
Check the compatibility of the block with the target controller. Check configuration. Delete then reload. Ensure
that adequate CPM memory resources are available and that capacity specifications are not being exceeded.

3.6.24 2123
Indicates that the internal name form of the referenced object is not associated wit ha particular CEE.

Error ID
CodeInvalidEECSevErr

Error name
Bad EE Code

Cause
1. This could be the result of an illegal chassis configuration or an internal error.
2. If this error occurs in a Control Recipe (activity, procedure, or batch), this can be caused by an unselected
unit referenced in an expression.

Solution
1. If chassis has been reconfigured, resort to previous configuration. Ensure that all blocks have been deleted
before attempting to move the CPM card in the chassis.
2. Ensure that all required units for the current execution context are selected. In most Master Recipe
configuration, the execution recovers automatically. However, with some Master Recipe configuration, the
failed expression has to be triggered to be re-executed (For example, by holding and restarting the control
recipe or For example, by holding and restarting the control recipe or by temporarily changing Mode to
SingleStep). For more information, refer to the parameter RETRYOPT.

3.6.25 2124
Indicates an internal error in the CM load protocol.

Error ID
CodeIllegalNumOfTBRefs

Error name
TB Ref Cnt

Cause
This error should not be encountered.

176 www.honeywell.com
 3 ERROR CODES

Solution
Contact TAC.

3.6.26 2125
Indicates an internal error in the CM load protocol.

Error ID
CodeTBRefOutOfSequence

Error name
TB Ref Seq

Cause
This error should not be encountered.

Solution
Contact TAC.

3.6.27 2126
SCM/RCM/ACT/MR state cannot be commanded when the CEE is in the idle state.

Error ID
CodeSCMCommandInvalidWhenCEEIdle

Error name
CeeIsIdle

Cause
This is the intended functionality.

Solution
Ensure that the CEE is in the run state before commanding the SCM/RCM/ACT/MR.

3.6.28 2127
Indicates that the operation failed because the block is not currently running. The Block's EXECSTATE must be
ACTIVE and CEESTATE must be RUN.

Error ID
CodeFBMustBeActiveAndCEERun

Error name
NotActAndRun

Cause
This is the intended functionality.

177
3 ERROR CODES

Solution
Activate the block and/or transition CEE to RUN.

3.6.29 2128
Indicates that the previous block load operation failed or malfunctioned.

Error ID
CodeInvalidLoadState

Error name
LoadStateErr

Cause
Caused by a load failure. The failure could be due to configuration or internal errors.

Solution
Check configuration for validity. Attempt to delete and reload block.

3.6.30 2129
Indicates that the Device Control block's first digital input is not connected. Operations such as CM activation
are blocked in this condition.

Error ID
CodeDevCtlDINumber1IsNotConnected

Error name
DI#1 Not Con

Cause
This is the intended safety behavior of the Device Control block.

Solution
Verify input connection of Device Control block. Reload if necessary.

3.6.31 2130
Indicates that the referenced independent or tagged block (CM, SCM, or IOM) does not exist or is not currently
loaded to the controller.

Error ID
CodeIndependentBlockDoesNotExist

Error name
IndBlkNotFnd

178 www.honeywell.com
 3 ERROR CODES

Cause
Problem is likely the result of load failure or loss of all or a portion of the controller database.

Solution
Ensure database integrity. Attempt to reload block.

3.6.32 2131
Indicates that the referenced dependent or component block does not exist or is not currently loaded to the
controller.

Error ID
CodeDependentBlockDoesNotExist

Error name
DepBlkNotFnd

Cause
Problem is likely the result of load failure of the associated independent block.

Solution
Attempt to reload the block. Investigate any load errors.

3.6.33 2132
Indicates a lack of expression code memory.

Error ID
CodeNotEnoughPCodeMemory

Error name
PCodeMemErr

Cause
May be caused by an internal limit.

Solution
None.

3.6.34 2133
Indicates that the Device Control block's second digital input is not connected. Operations such as CM
activation are blocked in this condition.

Error ID
CodeDevCtlDINumber2IsNotConnected

179
3 ERROR CODES

Error name
DI#2 Not Con

Cause
This is the intended safety behavior of the Device Control block.

Solution
Verify input connection of Device Control block. Reload if necessary.

3.6.35 2134
Indicates that the Device Control block's third digital input is not connected. Operations such as CM activation
are blocked in this condition.

Error ID
CodeDevCtlDINumber3IsNotConnected

Error name
DI#3 Not Con

Cause
This is the intended safety behavior of the Device Control block.

Solution
Verify input connection of Device Control block. Reload if necessary.

3.6.36 2135
Indicates that the Device Control block's fourth digital input is not connected. Operations such as CM activation
are blocked in this condition.

Error ID
CodeDevCtlDINumber4IsNotConnected

Error name
DI#4 Not Con

Cause
This is the intended safety behavior of the Device Control block.

Solution
Verify input connection of Device Control block. Reload if necessary.

3.6.37 2136
Indicates that the maximum allowable limit of function block types has been exceeded.

180 www.honeywell.com
 3 ERROR CODES

Error ID
CodeTooManyBlockTypes

Error name
MaxBlkTypes

Cause
Too many Block Types have been introduced due to the loading of a large number of CCLs.

Solution
Uninstall any unnecessary CCLs.

3.6.38 2137
Indicates that the Custom Control Library (CCL) is not of the expected size

Error ID
CodeIllegalSizeOfCCLMinorVersion

Error name
CclMinVerSiz

Cause
None.

Solution
None.

3.6.39 2138
Indicates that another CPM or CUSTOM CONTROL LIBRARY (CCL) load is in progress.

Error ID
CodeCPMorCCLLoadInProgress

Error name
LoadinProgrs

Cause
The CPM allows only one block to be loaded at a time.

Solution
None.

3.6.40 2139
Indicates a load failure due to redundancy synchronization activities.

181
3 ERROR CODES

Error ID
CodeCPMInitSyncOrSyncRDNPartner

Error name
SyncMaintErr

Cause
None.

Solution
None.

3.6.41 2140
This warning message is used to internally indicate that a remote store operation is pending or has not
completed.

Error ID
CodeRemoteStorePending

Error name
RemStorePend

Cause
This warning is used internally.

Solution
None

3.6.42 2141
Indicates that a connection was configured to a parameter that is not resident within the CPM.

Error ID
CodeIllegalConnToNonEEResidentParam

Error name
NonCeeResPar

Cause
Parameters resident external to CEE (in SR for example) cannot be referenced by connections.

Solution
None.

3.6.43 2142
Indicates that the output channel is in use.

182 www.honeywell.com
 3 ERROR CODES

Error ID
CodeControlOutputInUse

Error name
OuputInUse

Cause
None.

Solution
None.

3.6.44 2143
Output String Error

Error ID
CodeOutputStreamFailed

Error name
OutputStrErr

Cause
Occurs when a fault is detected between the IO Channel and the screw terminal (for example, no wire connected
on a diagnostic IOM).

Solution
None

3.6.45 2144
Check limits and adjust as necessary.

Error ID
CodePidSpEuLoOrHiIsNaN

Error name
PID:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check high and low limits and adjust as necessary.

183
3 ERROR CODES

3.6.46 2145
Indicates that the X1 engineering unit high or low limit is NaN in a AUTOMAN block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
< CodeAutoManX1EuLoOrHiIsNaN

Error name
Autom:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check limits and adjust as necessary.

3.6.47 2146
Indicates that the X1 engineering unit high or low limit is NaN in a FANOUT block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeFanOutXEuLoOrHiIsNaN

Error name
Fan:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check X1 high XEUHI and low XEULO limits and adjust as necessary.

3.6.48 2147
Indicates that less than two primary connections are connected in an OVRDSEL block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeOvrdNumOfConnectedInputsLessThan2

Error name
Ovrd:#Inpts

Cause
This is the correct behavior of the block.

184 www.honeywell.com
 3 ERROR CODES

Solution
Ensure that block is configured with two valid primary inputs.

3.6.49 2148
Indicates that the X1 engineering unit high or low limit is NaN in a OVRDSEL block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeOvrdXEuLoOrHiIsNaN

Error name
Ovrd:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check X1 high XEUHI and low XEULO limits and adjust as necessary.

3.6.50 2149
Indicates that the X1 engineering unit high or low limit is NaN in a SWITCH block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeSwitchXEuLoOrHiIsNaN

Error name
Swtch:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check X1 high XEUHI and low XEULO limits and adjust as necessary.

3.6.51 2150
Indicates that less than two primary connections are in a SWITCH block in the given Control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeSwitchNumOfConnectedInputsLessThan2

Error name
Swtch:#Inpts

185
3 ERROR CODES

Cause
This is the correct behavior of the block.

Solution
Ensure that block is configured with two valid primary inputs.

3.6.52 2151
Indicates that the selected primary is not connected in a SWITCH block in the given control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeSwitchSelectedPrimaryIsNotConnected

Error name
Swtch:PriCon

Cause
This is the correct behavior of the block.

Solution
Ensure the validity of the primary input connections.

3.6.53 2152
Indicates that at least on input must be selected in a SWITCH block in the given Control Module. Operations
such as CM activation are blocked in this condition.

Error ID
CodeSwitchAtLeastOneInputMustBeSelected

Error name
Swtch:InpSel

Cause
This is the correct behavior of the block.

Solution
Ensure that one input is selected prior to activation.

3.6.54 2153
Indicates that both primary connections must exist in a REMCAS block in the given Control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeRemCasBothPrimaryConnectionsMustExist

186 www.honeywell.com
 3 ERROR CODES

Error name
RemCas:2Prim

Cause
This is the correct behavior of the block.

Solution
Ensure that both primary conditions exist.

3.6.55 2154
Indicates that the limit is NaN

Error ID
< CodeRemCasXEuLoOrHiIsNaN

Error name
RemCs:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check X1 high and low limits and adjust as necessary.

3.6.56 2155
CM activation was blocked due to a configuration error in a GENLIN block in the given Control Module. The
error indicates either that the In/Out arrays do not have good values or the In array elements are not in ascending
order.

Error ID
CodeGenLinArrayConfigurationMismatchError

Error name
GenLin:InSeg

Cause
This is the correct behavior of the block.

Solution
If there is more than one GENLIN block in the CM, the user must determine which GENLIN block is causing
the problem. Verify the input segment coordinates.

3.6.57 2156
Handler Selection cannot be changed for the currently active handler type.

187
3 ERROR CODES

Error ID
CodeCannotSetForActiveHandlerType

Error name
HndlrisActiv

Cause
Store to SELHANDLER[i attempted when handler of type is active.

Solution
Must wait until handler type is not active, to change handler selection.

3.6.58 2157
Block name entered is not of type Handler.

Error ID
CodeBlockIsNotAHandler

Error name
BlkNotHndlr

Cause
Block name entered is not of type Handler.

Solution
Enter a Handler block name.

3.6.59 2158
Block name entered is not of type Step.

Error ID
CodeBlockIsNotAStep

Error name
BlkNotStep

Cause
Block name entered is not of type Step.

Solution
Enter a Step block name.

3.6.60 2159
Step entered is not in the current Handler.

188 www.honeywell.com
 3 ERROR CODES

Error ID
CodeStepIsNotInCurrentHandler

Error name
NotInHndlr

Cause
In SingleStep Mode, the target step selected must be in the same handler that is currently active.

Solution
Enter a Step that is in the current handler.

3.6.61 2160
Indicates an internal error in the acquisition of Custom Control Libraries after clean initialization.

Error ID
< CodePARAM_E

Error name
CCL Par Err

Cause
No known causes.

Solution
None

3.6.62 2161
Indicates a request to exceed the maximum number of CCL's which can be supported by the CPM. The
maximum number of CCL's is 50.

Error ID
CodeTABLEFULL_E

Error name
CCL Tbl Full

Cause
This is the intended operation of the CPM.

Solution
None

189
3 ERROR CODES

3.6.63 2162
Indicates that the referenced Custom Control Library (CCL) index is out of range based upon the current
number of CCL's loaded to the CPM.

Error ID
CodeINDEXTOOBIG_E

Error name
IndexRngErr

Cause
Under normal circumstances this error should not be encountered by the user.

Solution
None

3.6.64 2163
Indicates an internal error in either the transport, maintenance, or retention of CCL's after power loss.

Error ID
CodeINTEGRITYFAIL_E

Error name
CCL TblCorup

Cause
Varies, possibly an incorrect Custom Control Library (CCL) checksum after load of CCL.

Solution
If encountered on load, reload affected blocks.

3.6.65 2164
Indicates that the referenced Custom Control Library (CCL) does not exist.

Error ID
CodeLIBNOTEXIST_E

Error name
CCL NotExist

Cause
This is an internal error.

190 www.honeywell.com
 3 ERROR CODES

Solution
Ensure integrity of the database. If possible, reload CPM and contents.

3.6.66 2165
Indicates an internal Custom Control Library (CCL) reference (handle) error.

Error ID
CodeWRONGHANDLE_E

Error name
Inval hndle

Cause
This is an internal error.

Solution
Ensure integrity of the database. If possible, reload CPM and contents.

3.6.67 2166
Indicates that there are load or unload operations in progress, so any subsequent load or unload requests will be
rejected.

Error ID
CodeCCLMANAGERBUSY_E

Error name
CCL Mgr Busy

Cause
1. This is the intended design of the Custom Control Library (CCL) manager.
2. A newer CCL package version was installed on the server ERDB and a download was attempted before all
services took notice of the update.

Solution
1. Retry operation, which will succeed when CCL manager becomes available.
2. Reboot the server and then retry the download.

3.6.68 2167
Error in allocating CPM internal memory for a Custom Control Library (CCL); indicates sufficient memory to
support the operation.

Error ID
CodeALLOCATION_E

191
3 ERROR CODES

Error name
CCL MemAlloc

Cause
Usually caused during a load operation when CEE memory limits are reached.

Solution
Delete any unused or unnecessary blocks to free memory; attempt to reload desired block(s). It is recommended
to load blocks individually (rather than in groups) when working at or near the CPM memory limits. See the
FREEMEM and USEDMEM parameter descriptions of the CPM block.

3.6.69 2168
Indicates that the requested library currently exits in the CPM. This is an internal warning used for
'handshaking' between the Custom Control Library (CCL) builder on NT and the CCL manager in the CPM.

Error ID
CodeCCLALREADYEXIST_E

Error name
CCL exists

Cause
The requested CCL exists, and therefore does not need to be loaded.

Solution
None

3.6.70 2169
Indicates a packet sequence error in the load of a Custom Control Library (CCL).

Error ID
CodeNOTINSYNCHRON_E

Error name
NotInSynch

Cause
Caused by an incorrect sequence of the packets which are used to load the CCL.

Solution
Attempt reload. If problem persists, contact TAC.

3.6.71 2170
Indicates a Custom Control Library (CCL) size error in the load of a CCL.

192 www.honeywell.com
 3 ERROR CODES

Error ID
CodeLOADBUFFERFULL_E

Error name
LoadBufFull

Cause
Caused by an unexpected size of a CCL. The pre-computed size contained in the first packet was less than the
total size required.

Solution
Attempt reload. If problem persists, contact TAC.

3.6.72 2171
Indicates an internal error in the TFTP driver device within PSOS.

Error ID
< CodeTFTPDRIVER_E

Error name
CCL Drivr Er

Cause
This error should not be encountered under normal circumstances.

Solution
Attempt reload. If problem persists, contact TAC.

3.6.73 2172
Indicates an internal error in the PSOS loader in the CPM.

Error ID
CodePSOSLOADFAIL_E

Error name
PSOS Load

Cause
This error should not be encountered under normal circumstances.

Solution
Attempt reload. If problem persists, contact TAC.

193
3 ERROR CODES

3.6.74 2173
Indicates an internal error encountered by the Custom Control Library (CCL) manager in requesting a change in
the protection attributes for a CCL allocation.

Error ID
CodeCODEPROTCHG_E

Error name
ProtChgErr

Cause
This error should not be encountered under normal circumstances.

Solution
Attempt reload. If problem persists, contact TAC.

3.6.75 2174
Indicates an internal error encountered by the Custom Control Library (CCL) manager in acquiring the CCL
installation task ID.

Error ID
CodeINSTALLATIONTASK_E

Error name
NoInstalTask

Cause
This error should not be encountered under normal circumstances.

Solution
Attempt reload. If problem persists, contact TAC.

3.6.76 2175
Indicates an internal error between the CPM's Custom Control Library (CCL) manager and CCL installation
task.

Error ID
CodeNOCCLTOINSTALL_E

Error name
No CCL

Cause
This error should not be encountered.

194 www.honeywell.com
 3 ERROR CODES

Solution
None

3.6.77 2176
Indicates an internal error in Custom Control Library (CCL) registration.

Error ID
CodeACQUIRE_E

Error name
CCL Acq Err

Cause
This error should not be encountered.

Solution
None

3.6.78 2177
Indicates an internal error in locating the initialization and/or cleanup methods which should exist in the Custom
Control Library (CCL).

Error ID
CodeGETSYMADDR_E

Error name
CCL Loc Err

Cause
This error should not be encountered. Could be due to an internal error in the CCL itself.

Solution
Attempt reload.

3.6.79 2178
Indicates that the Custom Control Library (CCL) was generated with unknown or unused sections.

Error ID
CodeCCLSECTION_E

Error name
CCL Sect Err

Cause
This error should not be encountered. Could be due to an internal error in the CCL itself.

195
3 ERROR CODES

Solution
Attempt reload.

3.6.80 2179
This error is not used.

Error ID
CodeWRONGREFNAME_E

Error name
CCL Lib Name

Cause
None.

Solution
None.

3.6.81 2180
Indicates an error returned from the Custom Control Library (CCL) and standard CCLs after its initialization
function is invoked.

Error ID
CodeINITLIBRARY_E

Error name
CCL Init Lib

Cause
Caused by CCL Library considering both standard and Custom.

Solution
Contact TAC and a new CCL is required if it is a custom CCL separately.

3.6.82 2181
Indicates an internal error in migrating to a new CCL minor version.

Error ID
CodeMINORVERSION_E

Error name
CCL Min Ver

Cause
It is not expected that this error can be encountered unless due to an internal error or malfunction.

196 www.honeywell.com
 3 ERROR CODES

Solution
Attempt reload of CPM and contents.

3.6.83 2182
Indicates that the load operation failed due to an inappropriate CPM state in the secondary CPM.

Error ID
CodeSEMAPHORE_E

Error name
CCL Semaph

Cause
The secondary CPM must be disqualified in order to load a Custom Control Library (CCL). Load of a CL to a
fully synchronized CPM is not permitted.

Solution
Disqualify secondary CPM and reload. Re-synchronize secondary.

3.6.84 2183
rary load operation was abIndicates that the Custom Control Liborted due to timeout error.

Error ID
CodeABORTEDBYCPM_E

Error name
OperAborted

Cause
Caused by an unexpected delay during the load of the CCL to the CPM.

Solution
Attempt reload.

3.6.85 2184
Indicates that the CCL load operation was aborted due to incompatible software versions in NT and CPM.

Error ID
CodeINCOMPATIBLESW_E

Error name
Incomp SW

Cause
It is the intended operation of the CCL load protocol to verify compatible software version data.

197
3 ERROR CODES

Solution
Ensure/correct software version situation. Attempt reload.

3.6.86 2185
Indicates that the operation is prevented if DSBs are loaded on any of the PBLINKs.

Error ID
CodeDSBsLoaded

Error name
DSBs Loaded

Cause
Certain operations such as shutdown requires this check as a protection attribute.

Solution
None

3.6.87 2186
Indicates that an attempt was made to create a block instance that is not supported by the CEE. This error is only
possible during the Control recipe creation or contained component blocks.

Error ID
CodeCeeStaticBlkCntError

Error name
CeeStaticBlkCntError

Cause
An error was available in the block name in the def xml file and the corresponding name in the CEE block.

Solution
None

3.6.88 2187
Indicates that at present there is no adequate contiguous memory to create a Control recipe block in the CEE.
This error is only possible during the Control recipe creation or contained component blocks.

Error ID
CodeMemoryBlockFreeTooSmallRetry

Error name
MemoryBlockFreeTooSmallRetry

198 www.honeywell.com
 3 ERROR CODES

Cause
CEE memory is fragmented and garbage collection is needed to combine the memory.

Solution
Wait for some time to allow garbage collection in the CEE.

3.6.89 2188
Indicates that the Alarm Delay Time (On-Delay / Off-Delay) specified is less than the execution period of the
CM. Hence, the effect of Alarm Delay Time (On-Delay / Off-Delay) on the Alarm or RTN is visible only after
one execution period of the CM.

Error ID
CodeDelayTimeLessThanExecPeriod

Error name
DelayTimeLessThanExecPeriod

Cause
The configured Alarm Delay Time (On-Delay / Off-Delay) is less than the execution period of the CM.

Solution
Configure the Alarm Delay Time (On-Delay / Off-Delay) so that it is greater than the execution period of the
CM in order to notice the delay.

3.6.90 2189
Indicates that On-Delay time for the Bad Control alarm cannot be configured to a non-zero value when the Bad
Control Option is set to any Value other than 'NO SHED.'

Error ID
CodeConfigNotPermittedWithCurrentBadControlOption

Error name
ConfigNotPermittedWithCurrentBadControlOption

Cause
On-Delay Time for Bad Control Alarm is not supported when Bad Control Option is configured to any value
other then 'NO SHED.'

Solution
None

3.6.91 2190
Indicates that when the Bad Control option is set from NO-SHED to any other SHED option, the On-Delay
Time of Bad Control Alarm is reset to default.

199
3 ERROR CODES

Error ID
CodeBadControlAlarmOnDelayTimeReset

Error name
BadControlAlarmOnDelayTimeReset

Cause
On-Delay Time for Bad Control Alarm is not supported when Bad Control Alarm is configured to any value
other than NO-SHED.

Solution
None

3.6.92 2191
Indicates that the CK is out of request descriptor resource.

Error ID
CodeStoreRequestDecsriptorUnavailable

Error name
ReqstDescErr

Cause
More store transfers are in progress than the memory available in the CK to track the status of the store transfer.

Solution
Spread out the store transfers to avoid the limit.

3.6.93 2194
Invalid configuration of a whole array parameter reference.

Error ID
CodeInvalidWholeArrayConf

Error name
InvalidWholeArrConf

Cause
Parameter that does not support whole array transfer is configured for a whole array connection.

Solution
Check the configuration, rectify invalid whole array references, and then reload.

3.6.94 2195
Invalid source connector for cloning.

200 www.honeywell.com
 3 ERROR CODES

Error ID
CodeInvalidSourceConnector

Error name
InvalidSrcConn

Cause
This error should not be encountered. Contact Honeywell TAC.

Solution
None

3.6.95 2196
Requested to store an invalid operation for value of ALTENBOPT.

Error ID
CodeInvalidOperationForAlert

Error name
InvalidOpAlertEnb

Cause
Requested store is invalid for the current configuration of ALTENBOPT. If ALTENBOPT has been configured
as ON, then the function block can only be used for alerts. This error indicates that the flag block that has been
loaded has ALTENBOPT=TRUE value and an attempt is being made to store the value in an alarm related
parameter.

Solution
Change the value of ALTENBOPT to FALSE and reload the CM to use this function block for alarming.

3.6.96 2198
Success status that provides additional internal system context.

Error ID
CodeStatusOkWithForce

Error name
OkWithForce

Cause
This is an internal status that should always be exposed externally as a normal success status. If it is ever seen
externally it means that an internal masking operation was missed. Beyond that, there has been no malfunction
in the system or the application. The status should be treated as an indication of success.

Solution
No action is required. No workaround is required. The status can be treated as a normal success status.

201
3 ERROR CODES

3.6.97 2199
The controller is refusing to provide the data value at this time.

Error ID
CodeHoldForDataReady

Error name
HoldForData

Cause
During a re-load of a Control Module, the controller will not provide data until the CM has had a chance to
become consistent with the process. The condition is indicated by the CM parameter INITPENDING. The
INITPENDING condition can last for an extended period if the Control Module is left Inactive or if CEESTATE
is IDLE. This error can also be returned during a re-start of a controller, for instance after a power loss or a
Checkpoint Restore followed by IDLE to RUN transition. While some client software may identify the code as
an error condition, it does not reflect incorrect operation of the controller. This code is returned as the result of a
strategy configuration to hold data values during re-load and re-start.

Solution
The Control Module will normally cease reporting this error code after the configured hold time. If the CM
reports the error for longer than the configured hold time, check that the CM is Active and the CEESTATE is
RUN. To correct the issue, Activate the CM or set the CEESTATE to RUN as needed.

202 www.honeywell.com
 3 ERROR CODES

3.7 Codes 2200 to 2299

Related topics
“2200” on page 205
“2201” on page 205
“2202” on page 205
“2203” on page 206
“2204” on page 206
“2205” on page 206
“2206” on page 207
“2207” on page 207
“2208” on page 207
“2209” on page 208
“2210” on page 208
“2211” on page 209
“2212” on page 209
“2213” on page 209
“2214” on page 210
“2215” on page 210
“2216” on page 210
“2217” on page 211
“2218” on page 211
“2219” on page 212
“2220” on page 212
“2221” on page 212
“2222” on page 213
“2223” on page 213
“2224” on page 213
“2225” on page 214
“2226” on page 214
“2227” on page 215
“2228” on page 215
“2229” on page 215
“2230” on page 216
“2231” on page 216
“2232” on page 216
“2233” on page 217
“2234” on page 217
“2235” on page 217
“2236” on page 218
“2237” on page 218
“2238” on page 219
“2239” on page 219
“2240” on page 219
“2241” on page 220
“2242” on page 220
“2243” on page 220

203
3 ERROR CODES

“2244” on page 221

“2245” on page 221
“2246” on page 222
“2247” on page 222
“2248” on page 222
“2249” on page 223
“2250” on page 223
“2251” on page 223
“2252” on page 224
“2253” on page 224
“2254” on page 224
“2255” on page 225
“2256” on page 225
“2257” on page 225
“2258” on page 226
“2259” on page 226
“2260” on page 226
“2261” on page 227
“2262” on page 227
“2263” on page 227
“2264” on page 228
“2265” on page 228
“2266” on page 228
“2267” on page 229
“2268” on page 229
“2269” on page 229
“2270” on page 230
“2271” on page 230
“2272” on page 230
“2273” on page 231
“2275” on page 231
“2276” on page 231
“2277” on page 232
“2278” on page 232
“2279” on page 233
“2280” on page 233
“2281” on page 233
“2282” on page 234
“2283” on page 234
“2284” on page 234
“2285” on page 235
“2286” on page 235
“2287” on page 236
“2288” on page 236
“2289” on page 236
“2290” on page 237
“2291” on page 237
“2292” on page 237

204 www.honeywell.com
 3 ERROR CODES

“2293” on page 238

“2294” on page 238
“2295” on page 238
“2296” on page 239
“2297” on page 239
“2298” on page 239
“2299” on page 240

3.7.1 2200
Handler name entered is not the correct type of Handler.

Error ID
CodeHandlerIsNotCorrectType

Error name
HndlrBadType

Cause
Handler name entered must be of the same type expected. SELHANDLER[i expects handler of type i (i = 2-
Main, 3-Check, 4-Interrupt, 5-Restart, 6-Hold, 7-Stop, 8-Abort).

Solution
Enter a Handler name of the proper type.

3.7.2 2201
The interference between CCL and CEE is incompatible.

Error ID
CodeIncompatibleCCLCEEInterface

Error name
IncpCCLCEEIF

Cause
An interface either in the CCL or the CEE has been obsoleted, violating the grandfathering policies of interface.

Solution
A CCL compatible with the current version fo the CEE has to be rebuilt, or vice-versa.

3.7.3 2202
RatioBias block - XEULO or XEUHI is NaN.

Error ID
CodeRatioBiasXEuLoOrHiIsNaN

205
3 ERROR CODES

Error name
RBXeuIsNaN

Cause
User might be trying to store NaN value to either NaN values are not allowed for these parameters.

Solution
Enter a good value for these parameters.

3.7.4 2203
RegCalc block - XEULO or XEUHI is NaN.

Error ID
CodeRegCalcXEuLoOrHiIsNaN

Error name
RCXeuIsNaN

Cause
User might be trying to store NaN value to either XEULO or XEUHI>. NaN values are not allowed for these
parameters.

Solution
Enter a good value for these parameters.

3.7.5 2204
RegCalc block - X1 connection must exist.

Error ID
CodeRegCalX1PrimaryConnectionMustExist

Error name
RCX1IsMust

Cause
For RegCalc block, X1 primary connection must exist. X[1..6] are optional. Block will not go active if a valid
X1 connection does not exist.

Solution
Provide a valid connection for X1 input.

3.7.6 2205
RampSoak block - XEULO or XEUHI is NaN.

206 www.honeywell.com
 3 ERROR CODES

Error ID
CodeRampSoakPVEuLoOrHiIsNaN

Error name
RCPvEuIsNaN

Cause
User might be trying to store NaN value to either XEULO or XEUHI>. NaN values are not allowed for these
parameters.

Solution
Enter a good value for these parameters.

3.7.7 2206
RegCalc block - CV must Be Assigned.

Error ID
CodeRegCalcCvAssignmentNotConfigured

Error name
RCCvAssign

Cause
For RegCalc configuration, CV must be assigned to either an expression or any input.

Solution
Assign CV to an expression or input.

3.7.8 2207
RegCalc block - CVORFB must be assigned.

Error ID
CodeRegCalcCvOrFbAssignmentNotConfigured

Error name
RCCvOrAssign

Cause
For RegCalc configuration, CVORFB must be assigned to either an expression or any input.

Solution
Assign CVORFB to an expression or input.

3.7.9 2208
RegCalc block - CVINIT must be assigned.

207
3 ERROR CODES

Error ID
CodeRegCalcCvInitAssignmentNotConfigured

Error name
RCCvInAssign

Cause
For RegCalc configuration, CVINIT must be assigned to either an expression or any input.

Solution
Assign CVINIT to an expression or input.

3.7.10 2209
Indicates that a Device Control block has zero digital inputs and outputs. Operations such as CM activation are
blocked in this condition.

Error ID
CodeDevCtlNoInputsOrOutputs.

Error name
DV Config

Cause
This is the intended safety behavior of the Device Control block.

Solution
Reconfigure block with at least one input or output and reload.

3.7.11 2210
The Step block is configured to have N Outputs, and an Output number greater than N is being attempted to be
accessed. Output parameters on Steps are in the form StepName.OP[i].xxx, where i is the Output number and
xxx is the Output parameter being accessed.

Error ID
CodeOutputNotExistOnStep

Error name
OPNotOnStep

Cause
See description.

Solution
Correct Output number used in access, or reconfigure and reload Step block to increase the configured number
of Outputs.

208 www.honeywell.com
 3 ERROR CODES

3.7.12 2211
The Transition block is configured to have N Conditions, and a Condition number greater than N is being
attempted to be accessed. Condition parameters on Transitions are in the form TransitionName.C[i].xxx, where i
is the Condition number and xxx is the Condition parameter being accessed.

Error ID
CodeCondNotExistOnTrans

Error name
CNotOnTrans

Cause
See description.

Solution
Correct Condition number used in access, or reconfigure/reload Transition block to increase the configured
number of Conditions.

3.7.13 2212
The physical location of an I/O module cannot be changed simply by moving the card and reloading the block.

Error ID
CodeCantChangeIomLocation

Error name
Inv location

Cause
Connections to physical I/O modules are not broken on reload; only on delete.

Solution
First, the loaded copy of the IOM must be inactivated and deleted. Then the card should be moved and the new
version IOM loaded reflecting the new physical location.

3.7.14 2213
The specified physical location of the IOM is currently occupied by another IOM.

Error ID
CodeIomLocationOccupied

Error name
Loc Occupied

Cause
Likely a configuration error on the slot number or address of the IOM.

209
3 ERROR CODES

Solution
Check for configuration error and/or the existence of another IOM at the specified location. Reconfigure and
reload as necessary.

3.7.15 2214
This internal status indicates that the connection to the secondary RegCTL block is from a block in a peer CEE
which is not an initializable block. Note that this error is for internal use only and should not be visible by the
user.

Error ID
CodeRegPeerPrimaryIsNonInit

Error name
PeerNonInit

Cause
This status is internally used to ensure proper behavior of the RegCTL functionality.

Solution
None

3.7.16 2215
This error indicates that the configured PERIOD value is invalid causing a failure of the load operation.

Error ID
CodeIllegalConfigForPERIOD

Error name
IllPeriodVal

Cause
1. Currently, two different CEE software personalities are supported, with a 50 and 5 ms base execution period.
Only a subset of the possible PERIOD values is supported by each personality. The PERIOD value selected
cannot be less than the base execution period of the CEE and cannot be greater than 40 times the base
execution period of the CEE.
2. This error can occur if the CEE firmware or controller module is changed to one with a different base period
and the same configuration is reloaded.

Solution
1. Reconfigure with an appropriate value for PERIOD and reload.
2. Replace the PERIOD parameter value with 'DEFAULT' to achieve a base period independent configuration
(for example for IO modules). For tagged blocks where the parameter is not available in the configuration
form (for example, IO modules), use BulkEdit to review and change the PERIOD parameter value.

3.7.17 2216
This Severe error indicates that another block is already connected to some input pin of the TypeConvert block
and hence the load should fail.

210 www.honeywell.com
 3 ERROR CODES

Error ID
CodeTwoOrMoreInputConnections

Error name
TwoOrMoreInputs

Cause
Two or more input connections to the TypeConvert block.

Solution
Delete the unwanted second connection and reload.

3.7.18 2217
Indicates that RampSoak block has no configured profile. Operations such as CM activation are blocked in this
condition.

Error ID
CodeRampSoakNumProfilesIsZero

Error name
RSNumProfiles

Cause
RampSoak block with no configured profiles does not make any sense.

Solution
Reconfigure block with at least one profile.

3.7.19 2218
Indicates that RampSoak block's current segment is not SOAK. Operations such as store to REMSOAKTIME
are blocked in this condition.

Error ID
CodeRampSoakCurSegMustBeSoak

Error name
RSCurSegSoak

Cause
RampSoak block should have current segment SOAK to write to certain parameters.

Solution
None

211
3 ERROR CODES

3.7.20 2219
Indicates that RampSoak block's CVEULO or CVEUHI is NaN. RampSoak block has user defined CV range.

Error ID
CodeRampSoakCVEuLoOrHiIsNan

Error name
RSCvEuIsNaN

Cause
RampSoak block should have good values for CVEULO and CVEUHI.

Solution
None

3.7.21 2220
The parameter (SendFl & MsgNum) cannot be changed while the Message block is awaiting confirmation for a
Confirmable message that it has sent out. Same does not apply to an Informational message, however.

Error ID
CodeChgDisallowedWhileAwaitingConfrmtn

Error name
MsgCantChg

Cause
Trying to change parameter while awaiting confirmation for a message.

Solution
None. Do not attempt to change the parameter.

3.7.22 2221
CNET communication status for the IOM FB to IOM Device connection is bad. This could indicate that the
IOM Device is missing from the rack, there is a fault in the IO CNET cable or the IOM Device is not
functioning.

Error ID
CodeIOMBadConnectionStatus

Error name
IOMBadConn

Cause
This code is reported if an IOM FB is activated while a CNET connection failure exists. This code constitutes a
warning and does not prevent actvation of the IOM FB.

212 www.honeywell.com
 3 ERROR CODES

Solution
Operation of the IOM FB and IOM Device can proceed as normal once the condition causing the
communication failure is corrected.

3.7.23 2222
Attempts to transfer configuration data from the IOM FB to the IOM Device have not succeeded.

Error ID
CodeIOMBadReconfigurationStatus

Error name
IOMBadRecn

Cause
This code can be reported upon activation of an IOM FB following configuration change and reload. This code
constitutes an error. It prevents activation of the IOM FB.
The reason may be High Eng is less than Low Eng. or Fault value is exceedeing the designed value.
By viewing the ASAERRCODE (General Status) and ASAERRINFO (Extended Status) parameters in the IOM
Block, the exact error can be determined.

Solution
Correct the IOM configuration and reload.

3.7.24 2223
A NAN value has been found for Safe Value configuration on one or more channels of AOM FB. Value is
accepted after being changed. Value is changed to cause unpowered at time of failure. For current mode,
unpowered command value is -25%. For voltage mode, unpowered command value is 50%.

Error ID
CodeSafeValueClamped

Error name
SfVlClmp

Cause
This code can get reported upon load of AOM FB if configuration specifies NAN for Safe Value on one or more
channels.

Solution
No action required if Unpowered is desired for Safe Value. Otherwise, change configured Safe Value.

3.7.25 2224
This error indicates that the configured SUBSCPERIOD value (or Peer Update Rate) is invalid causing a failure
of the load operation of the CEE block.

213
3 ERROR CODES

Error ID
CodeIllegalConfigForSUBSCPERIOD

Error name
SUBSCPERerr

Cause
Currently two different CEE software personalities are supported, with a 50 and 5 ms base execution period.
The configured selection for SUBSCPERIOD cannot be less than the base execution period of the CEE.

Solution
Reconfigure with an appropriate value for SUBSCPERIOD and reload.

3.7.26 2225
This error indicates that the configured BASEPERIOD value (or Base Execution Period) is invalid causing a
failure of the load operation of the CEE block.

Error ID
CodeIllegalConfigForBASEPERIOD

Error name
BASEPERIODer

Cause
Currently two different CEE software personalities are supported, with a 50 and 5 ms base execution period.
The configuration choice for BASEPERIOD must be set in accordance with the software personality image
currently loaded to the CPM.

Solution
Reconfigure with the appropriate value for BASEPERIOD and reload, OR if the BASEPERIOD value is
correct, the appropriate CEE personality image needs to be reloaded, then load CPM/CEE blocks.

3.7.27 2226
Indicates that a reference was made to a component function block which does not exist. Note that this error
should not be encountered by the user under normal circumstances.

Error ID
CodeIllegalDOCSevErr

Error name
DOC err

Cause
No known causes of this condition exist; it merely serves as protection during the block load operation.

214 www.honeywell.com
 3 ERROR CODES

Solution
If error was encountered during load, attempt reload. If problem persists, attempt to reconfigure a new version
of the block and reload or seek technical assistance.

3.7.28 2227
Upon activation, if a RAMPSOAK block is unable to locate it's internal profile data, activation is prevented.

Error ID
CodeRampSoakProfileDataNotFound

Error name
RS Profile

Cause
None.

Solution
Ensure that any/all RAMPSOAK blocks have been properly configured and loaded successfully.

3.7.29 2228
Upon activation, if the RAMPSOAK block is unable to locate any internal ramp/soak segment data, activation
is prevented.

Error ID
CodeRampSoakSegmentDataNotFound

Error name
RS Segment

Cause
None.

Solution
Ensure that any/all RAMPSOAK blocks have been properly configured and loaded successfully.

3.7.30 2229
If the OPTYPE = NULL, the operator or engineer or supervisor cannot store to request variables.

Error ID
CodeInvalidOpType

Error name
InvalidOpType

215
3 ERROR CODES

Cause
None.

Solution
Ensure that OPTYPE is SET or NOTSTORED or DEFAULT.

3.7.31 2230
If OPCMD is configured, SCM cannot store to GOP to request variables.

Error ID
CodeOpCmdIsActive

Error name
OpCmdIsActive

Cause
None.

Solution
Ensure that OPCMD is disabled by setting flags to OFF.

3.7.32 2231
Scheduled traffic is being employed and the IOM FB to IOM Device connection needs to be scheduled.

Error ID
CodeIOMNotScheduledStatus

Error name
IOMSchdConn

Cause
This code is reported if an IOM FB intending to use scheduled traffic is activated without a valid schedule. Note
that this code constitutes a warning and does not prevent actvation of the IOM FB.

Solution
Operation of the IOM FB and IOM Device can proceed as normal once the IOM FB to IOM Device connection
is scheduled.

3.7.33 2232
There is no valid data found for some rampsoak segments in some profiles.

Error ID
CodeNoValidRampSoakPairs

216 www.honeywell.com
 3 ERROR CODES

Error name
InvalidRampSoakData

Cause
This code is reported if the configured Ramp rate or Soak Value are NaN and if the block is loaded with these
invalid values.

Solution
Change the invalid configuration data and load the block again.

3.7.34 2233
Initially only the ProcessLogix controller (PLX52) will only support scheduled I/O traffic. The Experion PKS
Control Processor returns this warning if the user mistakenly attempts to enable scheduled I/O traffic.

Error ID
CodeInvalidENBSCHDTRAF

Error name
SchdTrafErr

Cause
This code is reported if the Primary CPM FB is loaded to the Experion PKS controller with the
ENBSCHDTRAF parameter set to 'On'. Note that this code constitutes a warning and does not abort the load
operation. Subsequent snapshot restores will also generate this warning.

Solution
Set the ENBSCHDTRAF parameter to 'Off' for the Experion PKS controller.

3.7.35 2234
Indicates a limit or range error on the requested parameter value.

Error ID
CodeCvEuLoHiLimitOrRangeExceeded

Error name
RangeLimitEr

Cause
Range limits are enforced by the parameter store processing.

Solution
Change requested value to correct range.

3.7.36 2235
The CM is configured with SCM Option of Fixed or Dynamic but the associated SCM Name is not provided or
the SCM is not loaded.

217
3 ERROR CODES

Error ID
CodeScmNameError

Error name
ScmNameError

Cause
The SCM Name has to be configured and the SCM has to be loaded when SCM Option is either Fixed or
Dynamic.

Solution
Either configure SCM Name and load the SCM or change SCM Option to None.

3.7.37 2236
Exceeded the maximum number of Exchange Request function blocks allowed in the controller.

Error ID
CodeTooManyExchangeReqFBs

Error name
TooManyExchReqError

Cause
Resources are not available in the controller for this Exchange Request function block.

Solution
Either delete this block, or delete some other Exchange Request FB to make room for this one. Then reload the
CM.

3.7.38 2237
Exceeded the maximum number of Exchange Responder function blocks allowed in the controller.

Error ID
CodeTooManyExchangeRspFBs

Error name
TooManyExchRspError

Cause
Resources are not available in the controller for this Exchange Responder function block.

Solution
Either delete this block, or delete some other Exchange Responder FB to make room for this one. Then reload
the CM.

218 www.honeywell.com
 3 ERROR CODES

3.7.39 2238
An Alias Table reference is used as a Get (or Store) and there is a parameter request to Store (or Get) for that
same reference. It is intended that Alias Table cell references only support that same data transfer requests as
those performed by alias table owner.

Error ID
CodeIllegalPeerParameterReqFromAliasTable

Error name
IllegalPeerParameterReq

Cause
Only have parameter request transfers types as the ones performed by alias table owner.

Solution
Add all data transfer request type in Container so all parameter requests can be serviced.

3.7.40 2239
Implies that there is a peer transfer request that is not complete. This error is returned:
• If an alias table cell reference is servicing a peer store request and another client of that tries to issue another
store request. Essentially, ONLY one peer store request can be serviced by an alias table cell reference.
• If there is an attempt to change Selected Instance of Alias Table when a data transfer request IS NOT
complete.

Error ID
CodePeerConnectionInUseError

Error name
PeerConnInUse

Cause
Peer store pending and either change of selected instance or another attempt of data transfer for the same alias
table cell reference.

Solution
Only have one peer store request per alias table cell.

3.7.41 2240
Indicates that a remote fetch operation is pending or is not completed.

Error ID
CodeRemoteFetchPending

Error name
RemFetchPend

219
3 ERROR CODES

Cause
If the error is temporary - This is part of the normal operation during the latency times of peer traffic.
If the error is permanent - The destination controller path is unknown.
This is the case if the array IPEERNAME does not contain the name of the destination controller.
Refer CEE block, Peer Communications tab, Initiator connections for more information.

Solution
None

3.7.42 2241
The specified file number is already in use by another Exchange Responder block in the same controller.

Error ID
CodeDuplicateFileNumber

Error name
DupFileNum

Cause
Another Exchange Responder block with the same File Number has already been loaded to this controller.

Solution
Delete the other Exchange Responder block with the same File Number before reloading this block. Alternately,
change the File Number of this Exchange Responder block to some unique value before reloading the block.

3.7.43 2242
The specified CIP Name is already in use by another Exchange Responder block in the same controller.

Error ID
CodeDuplicateCipName

Error name
DupCipName

Cause
Another Exchange Responder block with the same CIP Name has already been loaded to this controller.

Solution
Delete the other Exchange Responder block with the same CIP Name before reloading this block. Alternately,
change the CIP Name of this Exchange Responder block to some unique value before reloading the block.

3.7.44 2243
Both the File Number and the CIP Name are Null or empty.

220 www.honeywell.com
 3 ERROR CODES

Error ID
CodeNullFileNumberAndCipName

Error name
NullNumName

Cause
This Exchange Responder block has been loaded with a zero File Number and an empty CIP name. This means
that this block cannot register for either PCCC or CIP access.

Solution
Set the File Number to a unique non-zero value and/or set the CIP Name to a unique non-empty string before
reloading the block.

3.7.45 2244
This Severe error indicates that PUSH block is configured to push values to two destinations. Hence, the load
should fail.

Error ID
CodeTwoOrMoreOutputConnections

Error name
TwoOrMoreOutputs

Cause
Two or more output destinations of the PUSH block.

Solution
Delete the unwanted second connection and reload.

3.7.46 2245
This warning indicates that there is a configuration mismatch between two blocks. Note that one or both blocks
may clamp to failsafe data as a consequence.

Error ID
ConfigurationMismatchWarning

Error name
ConfigWarn

Cause
Detected upon activation of one or both blocks (that is through activation of their container, if applicable).

Solution
Correct the configuration mismatch and reload.

221
3 ERROR CODES

3.7.47 2246
The operation has failed because the Number of PeerEnviroment is larger than 50.

Error ID
CodeNumPeerOutofRangeFail

Error name
OverRange

Cause
User selected the wrong Number of PeerEnviroment.

Solution
Change the number to be less than or equal to 50.

3.7.48 2247
The operation has failed because the IOC type is wrong. Block is not a CEE type of block

Error ID
CodeCeeTypeFail

Error name
NotCee

Cause
Passed the wrong datacontainer or set the wrong IOC Type.

Solution
Correct the IOC Type.

3.7.49 2248
The operation has failed because the duplicate EE code has been found inside the Peer Environment Table.

Error ID
CodeDuplicateEECFai

Error name
DuplicateEEC

Cause
System generated duplicate EE Code.

Solution
Check source code.

222 www.honeywell.com
 3 ERROR CODES

3.7.50 2249
The configured PEERSUBSCPERIOD value is invalid causing a failure of the load operation of the CEE block.

Error ID
CodeIllegalConfigPeerSUBSCPERIOD

Error name
SUBSCPERerr

Cause
The configured selection for SUBSCPERIOD cannot be less than the default base execution period of the CEE.

Solution
Reconfigure with an appropriate value for PEERSUBSCPERIOD and reload.

3.7.51 2250
This error indicates that the configured ExpCycsvalue is invalid causing a failure of the load operation of the
CEE block.

Error ID
CodeIllegalConfigPeerCycs

Error name
ExpCycs

Cause
The configured selection for SUBSCPERIOD cannot be negative.

Solution
Reconfigure with an appropriate value for ExpCycs and reload.

3.7.52 2251
Current CEE Environment Table Space is occupied. It cannot be overloaded.

Error ID
CodePeerEnvOccupied

Error name
EnvOccupied

Cause
The record to be filled is supposed be empty.

223
3 ERROR CODES

Solution
Recheck the current record.

3.7.53 2252
Selected CEE of Environment Table is NULL.

Error ID
CodeNullPeerEnv

Error name
PeerEnvNull

Cause
EE code of Environment Table should not be NULL.

Solution
Recheck it, if it should be a dummy record.

3.7.54 2253
The Subscription Period setting failed.

Error ID
CodeSetSubPeriodFail

Error name
IniSubScPer

Cause
Out of Subscription Period defined range.

Solution
Reset.

3.7.55 2254
The current CEE is connected to itself, which is illegal.

Error ID
CodeIllegalCEEConnection

Error name
EECConnect

Cause
One EE link to itself.

224 www.honeywell.com
 3 ERROR CODES

Solution
Change the InConnect Name, which is not the same as OutConnect Name.

3.7.56 2255
Current Peer-to-Peer Environment Table index number is out of range. Number is larger than the current size of
Peer Environment Structure Array.

Error ID
CodeNumPeerOutofRange

Error name
NumPeerOutofRange

Cause
Overload Peer Environment.

Solution
Either enlarge the size of Peer Environment Structure Array or decrease the index number.

3.7.57 2256
The Subscription Period returned the wrong value, which is an undefined enumeration SubscriptionPeriods
type.

Error ID
CodeGetSubPeriodFail

Error name
GetSubScPer

Cause
Undefined Enum Subscription Period.

Solution
Check SubscriptionPeriod value of EnvTable inside ckconnectionmanager.

3.7.58 2257
The SIMSTATE is wrong value. It should be SIMFREEZE

Error ID
CodeWrongSIMState

Error name
SETSIMSTATE

225
3 ERROR CODES

Cause
State was not set to FREEZE

Solution
Set SIMSTATE to SIMFREEZE.

3.7.59 2258
SIMSTATE is wrong value.

Error ID
CodeOperationNotAllowedInSIMRun

Error name
OpNotAllowed

Cause
Operation cannot be performed while SIMSTATE is SIMRUN.

Solution
Set SIMSTATE to other than SIMRUN.

3.7.60 2259
Certain operations are temporarily prohibited to the primary controller during On-Process Migration (OPM).

Error ID
CodeOperationInvalidDuringOPM

Error name
InvalidOPM

Cause
Operation cannot be performed during OPM.

Solution
Retry operation after OPM completion (or abort current OPM session).

3.7.61 2260
Indicates that the block was configured with an illegal connection destination of itself.

Error ID
CodeCannotConnectToSelf

Error name
ConnDestSelf

226 www.honeywell.com
 3 ERROR CODES

Cause
Improper block configuration. Some block types require user to type in the name of associated block. This error
is returned if the user supplies the name of the block being configured as the associated block.

Solution
Ensure the validity of all configured connection destinations. Reload as necessary.

3.7.62 2261
This error is generated when user tries to load other function blocks before loading GEE FB.

Error ID
CodeGEEFBNotLoaded

Error name
GEEFBNotLoaded

Cause
GEE FB Not loaded.

Solution
Try to load or reload GEE FB again and proceed.

3.7.63 2262
This error is generated when user tries to load other function blocks before loading CHG FB.

Error ID
CodeCHGFBNotLoaded

Error name
CHGFBNotLoaded

Cause
CHG FB Not loaded.

Solution
Try to load or reload CHG FB again and proceed.

3.7.64 2263
Not used in the code till now, the following sections needs to be updated whenever recognized.

Error ID
CodeDFBNotLoaded

Error name
DFBNotLoaded

227
3 ERROR CODES

Cause
None.

Solution
None.

3.7.65 2264
This failure error generated when, the DFB or FFB registration in BM FB Address Map fails due to some
reason.

Error ID
CodeWrongOrExistingHiwayAdr

Error name
WrongOrExistingHiwayAdr

Cause
This error occurs because of duplicate registration, wrong box range, memory allocation failed and so on.

Solution
None.

3.7.66 2265
This failure error generated when, the DFB or FFB Unregistration from BM FB Address Map fails due to some
reason.

Error ID
CodeUnregisterFBInFBAdrMapFailed

Error name
UnregisterFBInFBAdrMapFailed

Cause
Reasons could be box no. or hiway address not present in Addr Map, memory handle.

Solution
None.

3.7.67 2266
This failure error generated when DFB argument for which RCD is being registered in not loaded.

Error ID
CodeRegisterRCDInFBAdrMapFailed

228 www.honeywell.com
 3 ERROR CODES

Error name
RegisterRCDInFBAdrMapFailed

Cause
None.

Solution
None.

3.7.68 2267
This failure error generated when DFB argument for which RCD is being unregistered in not loaded.

Error ID
CodeUnregisterRCDInFBAdrMapFailed

Error name
UnregisterRCDInFBAdrMapFailed

Cause
None.

Solution
None.

3.7.69 2268
This failure error generated for various operation those are not allowed in unless certain conditions are met.

Error ID
CodeIllegalOperation

Error name
IllegalOperation

Cause
Reasons for this could be anything ranging from, changing EXECSTATE of FFB when not allowed from DFB
to Changing MODE in Reg FBB when not allowed to and so on.

Solution
Meet to required conditions to carry out that operation and proceed.

3.7.70 2269
This failure error generated when HPr transaction chain is exhausted in DHM.

Error ID
CodeHPrTrnChainExhausted

229
3 ERROR CODES

Error name
HPrTrnChainExhausted

Cause
None.

Solution
Reduce the hiway traffic

3.7.71 2270
This failure error generated when DHM Request Queue Overflows.

Error ID
CodeDHMRequestQueueOverflow

Error name
DHMRequestQueueOverflow

Cause
None.

Solution
Reduce the hiway traffic.

3.7.72 2271
This failure error generated when a hiway store results in wrong Hiway control state.

Error ID
CodeControlStateError

Error name
ControlStateError

Cause
Wrong HWYCTLST

Solution
None.

3.7.73 2272
This warning error generated when you try hiway store, with LOADSCOPE = GtwOnly.

Error ID
CodeLoadscopeError

230 www.honeywell.com
 3 ERROR CODES

Error name
LoadscopeError

Cause
None.

Solution
None.

3.7.74 2273
This failure error generated when a parameter get or store request from FFB result in wrong Hiway address.

Error ID
CodeHiwayAddressError

Error name
HiwayAddressError

Cause
None.

Solution
None.

3.7.75 2275
This failure error generated when a Hpr get or store results in error for any hiway box.

Error ID
CodeDeviceFailureError

Error name
DeviceFailureError

Cause
None.

Solution
None.

3.7.76 2276
This failure error generated when command to DHM subsystem results in failure.

Error ID
CodeDHMCommandFailed

231
3 ERROR CODES

Error name
DHMCommandFailed

Cause
This error code come from various command like swap cables and reset statistics and so on, given through CHG
FB when DHM is not able to process those command due to some DHM internal errors.

Solution
None.

3.7.77 2277
Indicates that the block was configured with an illegal This faliure error generated when data returned from
DHM subsystem is illegal or invalid.

Error ID
CodeIllegalDHMData

Error name
IllegalDHMData

Cause
The pointers returned from DHM for common data shared by DHM CHG FB and various DFBs, turns out to be
NULL.

Solution
This is a precaution. Should never result in this error condition. As of now restart gee.exe

3.7.78 2278
The Step Output or Transition Condition does not have enough source connections allocated in the CEE.

Error ID
CodeNotEnoughSrcConnsAllocated

Error name
NotESrcConn

Cause
A mismatch in the expression configuration in the configuration database (ps_erdb) is usually the reason. An
inconsistency between the NUmSrcConn and PCodeSize parameters vs. the actual expression probably exists.
This shouldn't happen, but has been observed on occasion.

Solution
Reparse the affected expression to clean-up the inconsistency, and then reload the SCM.

232 www.honeywell.com
 3 ERROR CODES

3.7.79 2279
Beginning with first release of Experion PKS system, all CM Programs have an explicit version number to
identify which version of CL was used to send the CM configuration data. This version number is necessary for
interoperability requirements, because CL may be upgraded before controller firmware.

Error ID
CodeInvalidCMProgID

Error name
InvalidCMProgID

Cause
Using outdated version of lib.ocx with Controller that is running latest firmware.

Solution
Upgrade lib.ocx to most current version.

3.7.80 2280
The value selected needs a license.

Error ID
CodeUpgradeLicense

Error name
UpgradeLicense

Cause
The user has selected a value for a parameter. The selection requires a license for use.

Solution
Upgrade license.

3.7.81 2281
In the message block there are certain parameters that are only used with the double signature message type.

Error ID
CodeValidateForDoubleSignatureOnly

Error name
ValidateForDoubleSignatureOnly

Cause
The user has a message that is not of double signature type and tried to change a parameter that is only used
with the double signature message type.

233
3 ERROR CODES

Solution
Either do not change the parameter or use a double signature message type.

3.7.82 2282
Prior to attempting to reference self-identifying aggregate data, its status is verified to be normal.

Error ID
CodeBadAggregateStatus

Error name
BadAggSts

Cause
By default this status is initialized to normal. Therefore, the most likely cause is data corruption.

Solution
None

3.7.83 2283
Prior to attempting to reference self-identifying aggregate data, the data access or compares its signature against
all signatures known for this data type.

Error ID
CodeInvalidAggregateId

Error name
InvAggId

Cause
Data type mismatch between different versions of firmware and/or software. .

Solution
Update/downgrade to align with compatible versions of firmware and software.

3.7.84 2284
Prior to attempting to reference self-identifying aggregate data, the data access or compares its actual size
against its expected size (and generates this error if not identical).

Error ID
CodeInvalidAggregateSize

Error name
InvAggSize

234 www.honeywell.com
 3 ERROR CODES

Cause
Change was made to 'signature protected' aggregate that did not affect the signature, but changed the size of the
aggregate. For example, a constant used to define the size of an array data members was changed. In this case,
the aggregate definition does not change, but the size of the aggregate does change. This implies that 2 different
versions of firmware/software are using 2 different versions of this aggregate.

Solution
Update/downgrade to align with compatible versions of firmware and software.

3.7.85 2285
SCM has a 'Stop State Option' parameter. You are not allowed to change this parameter if the SCM is in a
Stopped state.

Error ID
CodeChangeNotPermittedInStopState

Error name
StopState

Cause
The SCM is in a Stopped state.

Solution
Change SCM to another state.

3.7.86 2286
Memory Limit Exceeded.

Error ID
MemoryLimitExceededWarn

Error name
InvMemSize

Cause
The database is consuming more than the specified Total Memory (TOTALMEM). When the limit is
approached, a low priority alarm is generated, provided that the 'Enable Memory Exceeded Alarm'
(ENBMEMALMFL) check box is enabled as visible on the detail display for the CPM block. Also, the 'Current
Memory Free' (FREEMEM), and 'Largest Free Memory Block Size' (MAXFREEBLKSZ) statistic display a
negative number. 'Memory Limit Exceeded' warning will be displayed on the load operation itself.

Solution
Re-engineer control strategies so the database configurations do not use more than the specified Total Memory
available. If necessary, configurations should be changed or deleted in order to ensure that this condition is
corrected. If this condition is not corrected, on-process migration to future releases will not be guaranteed.

235
3 ERROR CODES

3.7.87 2287
Indicates that the numerical identifier which was translated from the specified parameter is not known by the
Execution Environment.

Error ID
CodeInvalidParameterBlank

Error name
InvalidParamEr

Cause
1. Should not occur parameter names are mapped into numerical codes. The CEE software doesn't have any
knowledge of the numerical code it received. Possible due to incompatible software versions.
2. A newer CCL package version was installed on the server ERDB and data access to parameters defined in
the newer CCL version was attempted, but the CCL package in the controller has not been updated.
3. This error may occur in a chart view for a Control Recipe (CR) when an indirect reference is used in the
condition of a transition and the CR is in a terminal (complete, stopped (if configured as terminal) or
aborted) state. This error is computed after the CR transitions to a terminal state. Note that the error did not
compromise execution integrity of the CR.

Solution
1. Ensure compatible software versions.
2. Follow installation/upgrade instructions to update the CCL in the controller. You can also refer to the error
code 2166 for possible workaround in some scenarios.

3.7.88 2288
The transfer function model for a PID-PL function block is invalid.

Error ID
CodePIDPLInvalidTF

Error name
PID-PL InvalidTF

Cause
An error was identified with the configuration of the transfer function model.

Solution
Make sure the number of coefficients in the numerator is less than the number in the denominator.

3.7.89 2289
The transfer function model of a PID-PL function block has multiple integrators.

Error ID
CodePIDPLMultipleIntegrator

236 www.honeywell.com
 3 ERROR CODES

Error name
PID-PL MultIntegrator

Cause
The transfer function contains more than one integrator.

Solution
Re-enter the transfer function model with no more than one integrator.

3.7.90 2290
The transfer function model for a PID-PL function block is unstable.

Error ID
CodePIDPLUnstableTF

Error name
PID-PL UnstableTF

Cause
The transfer function contains unstable dynamics.

Solution
Check your process dynamics; re-enter the transfer function model.

3.7.91 2291
The transfer function model gain for a PID-PL function block is zero.

Error ID
CodePIDPLZeroGainTF

Error name
PID-PL ZeroGain

Cause
The transfer function model has a steady-state gain of zero.

Solution
Re-enter the transfer function model with non-zero gain.

3.7.92 2292
The execution period for a PID-PL function block is too small.

Error ID
CodePIDPLExecutionPeriodTooSmall

237
3 ERROR CODES

Error name
PID-PL TsTooSmall

Cause
The CM execution period is too small for the entered process dynamics.

Solution
Re-schedule the CM with a slower execution period.

3.7.93 2293
The execution period for a PID-PL function block is too large.

Error ID
CodePIDPLExecutionPeriodTooBig

Error name
PID-PL TsTooBig

Cause
The CM execution period is too large for the entered process dynamics.

Solution
Re-schedule the CM with a faster execution period.

3.7.94 2294
The OP readback parameter on a PID-PL function block is bad.

Error ID
CodePIDPLBadOp

Error name
PID-PL OPBad

Cause
The OP, as read from the secondary source, is bad.

Solution
Verify the connection to the secondary source.

3.7.95 2295
The control action of a PID-PL function block was reset based on model gain.

Error ID
CodePIDPLCtlActnReset

238 www.honeywell.com
 3 ERROR CODES

Error name
PID-PL ResetCtlActn

Cause
The control action parameter is inconsistent with transfer function model gain.

Solution
The PID-PL algorithm resets control action using the sign of process gain. Review the model and control action
parameter. If the current value of control action is incorrect, negate the model gain.

3.7.96 2296
For a PID-PL function block, the performance ratio is configured for an integrating process instead of the closed
loop response time.

Error ID
CodePIDPLPerfRatOnIntegrator

Error name
PID-PL PerfRatInvalid

Cause
The performance ratio is set to one and cannot be altered on integrating processes.

Solution
Configure the function block to use closed loop response time, not performance ratio.

3.7.97 2297
For a PID-PL function block, the closed loop response time is configured for a non-integrating process instead
of the performance ratio.

Error ID
CodePIDPLCLRTOnNonIntegrator

Error name
PID-PL CLRTInvalid

Cause
The closed loop response time cannot be altered on non-integrating processes.

Solution
Configure the function block to use performance ratio, not closed loop response time.

3.7.98 2298
For a PID-PL function block, the process transfer function model does not match an internal (active controller)
model. As a safeguard, the block cannot be activated until these models match. Model mismatch occurs when a

239
3 ERROR CODES

new transfer function is entered but has not been updated, or when an error is found with the entered transfer
function.

Error ID
CodePIDPLUpdateorResetModel

Error name
PID-PL UpdateorResetModel

Cause
Entered transfer function model does not match internal model.

Solution
Use the buttons on the Advanced tab of the PID-PL displays to either update or reset the model:
• Clicking the Update Model button downloads the model defined in the PID-PL configuration form to the
active controller.
• Clicking the Reset Model button resets the model in the PID-PL configuration form to match the model in
the active controller.

3.7.99 2299
Initiator cannot establish connection with the Responder

Error ID
ConnectionEstablishmentError

Error name
ConnectionEstablishmentError

Cause
None.

Solution
None.

240 www.honeywell.com
 3 ERROR CODES

3.8 Codes 2300 to 2399

Related topics
“2300” on page 243
“2301” on page 243
“2302” on page 243
“2303” on page 244
“2304” on page 244
“2305” on page 244
“2306” on page 245
“2307” on page 245
“2308” on page 245
“2309” on page 246
“2310” on page 246
“2311” on page 246
“2312” on page 247
“2313” on page 247
“2314” on page 247
“2315” on page 248
“2316” on page 248
“2317” on page 249
“2318” on page 249
“2319” on page 249
“2321” on page 250
“2322” on page 250
“2323” on page 250
“2324” on page 251
“2325” on page 251
“2326” on page 251
“2327” on page 252
“2328” on page 252
“2329” on page 252
“2330” on page 253
“2331” on page 253
“2332” on page 253
“2333” on page 254
“2334” on page 254
“2335” on page 254
“2336” on page 255
“2337” on page 255
“2338” on page 255
“2339” on page 256
“2340” on page 256
“2342” on page 257
“2343” on page 257
“2344” on page 257
“2345” on page 258

241
3 ERROR CODES

“2346” on page 258

“2347” on page 258
“2348” on page 259
“2349” on page 259
“2350” on page 260
“2351” on page 260
“2352” on page 260
“2353” on page 261
“2354” on page 261
“2355” on page 261
“2356” on page 262
“2357” on page 262
“2358” on page 262
“2359” on page 263
“2360” on page 263
“2361” on page 263
“2362” on page 264
“2363” on page 264
“2364” on page 264
“2365” on page 265
“2366” on page 265
“2367” on page 265
“2368” on page 266
“2369” on page 266
“2370” on page 266
“2371” on page 267
“2372” on page 267
“2373” on page 267
“2374” on page 268
“2375” on page 268
“2376” on page 268
“2378” on page 269
“2379” on page 269
“2380” on page 270
“2381” on page 270
“2382” on page 270
“2383” on page 271
“2384” on page 271
“2385” on page 272
“2386” on page 272
“2387” on page 272
“2388” on page 273
“2389” on page 273
“2390” on page 274
“2391” on page 274
“2392” on page 274
“2393” on page 275
“2394” on page 275

242 www.honeywell.com
 3 ERROR CODES

“2395” on page 276

“2396” on page 276
“2397” on page 277
“2398” on page 277
“2399” on page 277

3.8.1 2300
Change is not permitted when SIMSTATE is SIMNONE.

Error ID
ImproperSimState

Error name
ImproperSimState

Cause
None.

Solution
None.

3.8.2 2301
Non-Sim environment cannot read from Sim environment.

Error ID
NonSimCantReadFromSim

Error name
NonSimCantReadFromSim

Cause
None.

Solution
None.

3.8.3 2302
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABNotLoaded

Error name
CABNotLoaded

243
3 ERROR CODES

Cause
The block is not loaded

Solution
Not applicable.

3.8.4 2303
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABLoading

Error name
CABLoading

Cause
The block is loading.

Solution
Not applicable.

3.8.5 2304
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABLoaded

Error name
CABIsLoaded

Cause
The block is loaded.

Solution
Not applicable.

3.8.6 2305
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABLoadError

244 www.honeywell.com
 3 ERROR CODES

Error name
CABLoadError

Cause
There was an error loading the block.

Solution
Not applicable.

3.8.7 2306
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABQueueIsFull

Error name
CABQIsFul

Cause
The block loading queue is full.

Solution
Wait a while then store the same data blob to the LOADDATA parameter again

3.8.8 2307
Status returned in a data container to indicate that the requested operation was successful.

Error ID
CodeCABOk

Error name
CABOkSts

Cause
The requested operation succeeded.

Solution
Not applicable.

3.8.9 2308
Tried to allocate auxiliary memory but the allocation failed

Error ID
CodeMemoryAllocationFailed

245
3 ERROR CODES

Error name
MemAllocFail

Cause
No memory available

Solution
See why there is no memory available

3.8.10 2309
The version number associated with the HEADER parameter is not supported in this version of the product.

Error ID
CodeUnsupportedHeaderVersion

Error name
UnsupportedHeader

Cause
User may be mixing the incorrect version of Experion components.

Solution
Use the correct combination of Experion components.

3.8.11 2310
The version number associated with the DEFINITION parameter is not supported in this version of the product.

Error ID
CodeUnsupportedDefinitionVersion

Error name
UnsupportedDefinition

Cause
User may be mixing the incorrect version of Experion components.

Solution
Use the correct combination of Experion components

3.8.12 2311
The DEFINITION parameter was broken up. The index values received are out of order. It is a requirement that
these packets be received in order.

Error ID
CodeDefinitionIdxOutOfOrder

246 www.honeywell.com
 3 ERROR CODES

Error name
DefinitionIdxOutOfOrder

Cause
Data transfer error

Solution
Reload block

3.8.13 2312
An error occurred during load of the definition of a custom block type such as CDB, PHASE or CAB.

Error ID
CodeDefinitionLoadFailed

Error name
DefinitionLoadFailed

Cause
Invalid block type or communication failure. Look at block type definition for causes.

Solution
Fix block type definition and reload block.

3.8.14 2313
At the end of the load of the DEFINITION parameter, CDPs are loaded to CDDM. If the actual number of
CDPs loaded is < or > what is expected a failure will occur.

Error ID
CodeCDDMLoadOfCDPFailed

Error name
CDDMLoadOfCDPFailed

Cause
Data transfer error

Solution
ReLoad block

3.8.15 2314
When a block type definition is loaded for CDB, PHASE or CAB, a CRC code is sent to verify correct data
transfer. A CRC error indicates that the data transfer was not correct.

247
3 ERROR CODES

Error ID
CodeMismatchCRCValues

Error name
MismatchCRCValues

Cause
Data transfer error

Solution
ReLoad Block

3.8.16 2315
The definition array in the custom data definition manager holds a fixed number of loaded Custom Data Block
types. This number has been reached and no more block types can be loaded.

Error ID
CodeDefinitionArrayFull

Error name
DefinitionArrayFull

Cause
Trying to load too many CDB types.

Solution
Delete all instances of a type and this will free a slot in the array.

3.8.17 2316
The definition blob contains the information defining all the custom data parameters of a custom data block
type. This blob either has a size that exceeds the supported size of a definition blob or the blob has a size
inconsistent with the size information in the header.

Error ID
CodeBlobExceedsLimits

Error name
CodeBlobExceedsLimits

Cause
Too many custom data parameters for the custom data block type or the definition blob is corrupt.

Solution
Refer the block type definition for causes. Edit the custom data block type and remove some of the custom data
parameters.

248 www.honeywell.com
 3 ERROR CODES

3.8.18 2317
Trying to get information about an entry in the custom data definition manager definition array but an illegal
reference number is being used. The definition array is a fixed size and there for has a fixed range of reference
number.

Error ID
CodeUsingIllegalReferenceNumber

Error name
UsingIllegalReferenceNumber

Cause
Using an illegal reference number

Solution
Make sure the reference number being used was initially retrieved from the CustomDataDefMngr. A reference
number can be obtained as a result of the creation of a new entry in the array or by requesting it using the
Custom Data Block type id.

3.8.19 2318
The size of memory needed to hold the entire checkpoint data is larger than what is supported. The size limit is
based on the size limit of the DSD buffer which is 32K as of Mercury R210.

Error ID
CodeOCDSizeExceedsLimits

Error name
OCDSizeExceedsLimits

Cause
Too many Custom Data Parameters whose data values will be apart of the checkpoint data.

Solution
Edit the Custom Data Block type and remove some of the Custom Data Parameters or make the access of the
parameter AppDevOnly and the value will not be counted as checkpoint data.

3.8.20 2319
The Custom Data Parameter trying to be accessed is not part of the loaded block.

Error ID
CodeInvalidCustomParam

Error name
InvalidCustomParam

249
3 ERROR CODES

Cause
The Custom Data Parameter was added to the type after the block was loaded.

Solution
Reload the block.

3.8.21 2321
An instantiated CAB type in one which has one or more instances defined against it within the CEE. The
number of CAB type instances that can be loaded is restricted.

Error ID
CodeCABInstanceLimitExceeded

Error name
CABLoadError

Cause
Attempting to load too many CAB instances in an Ace.

Solution
Delete some CAB type instances.

3.8.22 2322
An instantiated CAB type in one which has one or more instances defined against it within the CEE. The
number of Cab types that can have loaded instances is restricted.

Error ID
CodeCABInstantiatedTypeLimitExceeded

Error name
CABLoadError

Cause
Attempting to load instances of too many CAB types.

Solution
Delete all instances of any CAB types that are not needed.

3.8.23 2323
A runtime exception has occurred in an instantiated CAB type, the instance will resume execution next cycle.

Error ID
CodeCABExceptionOccurred

250 www.honeywell.com
 3 ERROR CODES

Error name
CABException

Cause
Coding error in the CAB type.

Solution
Delete the CM containing the offending CAB type or fix the coding error in the type.

3.8.24 2324
FLOWCOMP: All required Inputs Not Connected

Error ID
CodeReqdInputsNotConnected

Error name
Equation

Cause
None.

Solution
None.

3.8.25 2325
OVERRIDE: At least Input one needs to be connected.

Error ID
OvrdNumOfConnectedInputsLessThan1

Error name
None.

Cause
None.

Solution
None.

3.8.26 2326
Indicates that the Binding of the 1D Array is successful.

Error ID
CodeOneDimArrayBindStsOk

251
3 ERROR CODES

Error name
OneDimArrayBindStsOk

Cause
None.

Solution
None.

3.8.27 2327
Indicates that the Binding of the 2D Array is successful

Error ID
CodeTwoDimArrayBindStsOk

Error name
TwoDimArrayBindStsOk

Cause
None.

Solution
None.

3.8.28 2328
Indicates that there is dimension mismatch at both ends of the whole array connection.

Error ID
ConnDimensionMismatch

Error name
None.

Cause
A whole array connection between two parameters with different dimensions cannot be made

Solution
Make a whole array connection between two parameters with same dimension

3.8.29 2329
Indicates there is a difference in the first dimension at both ends of the whole array connection.

Error ID
Conn2DParam1DMismatch

252 www.honeywell.com
 3 ERROR CODES

Error name
None.

Cause
A whole array connection between two 2D parameters with different first dimension sizes cannot be made.

Solution
Make a whole array connection between two 2D parameters only if their first dimension size matches.

3.8.30 2330
Previously confirmed Step or Step Output Instruction cannot be un-confirmed.

Error ID
CannotUnconfirmInstruction

Error name
NotUnconfirmErr

Cause
Step or Step Output Instruction has already been confirmed.

Solution
None

3.8.31 2331
Confirmation of Step Output Instruction is not needed.

Error ID
ConfirmInstructionNotNeeded

Error name
ConfirmNotNeedErr

Cause
Step Output Instruction Type does not require confirmation.

Solution
None

3.8.32 2332
Must Confirm Step Output Instructions in sequence, from 1 to N.

Error ID
MustConfirmOutputsInSequence

253
3 ERROR CODES

Error name
MustConfirmSeq

Cause
Step configuration has set INSTRUCTSEQ to On, so confirmation of Step Output Instructions in sequence is
enforced. When order is enforced, cannot confirm at Step level either.

Solution
Can change Step INSTRUCTSEQ if desired.

3.8.33 2333
Step Output will report execution error when the Instruction is of type None and a null/blank expression is
configured.

Error ID
BothInstructionAndExprNull

Error name
BothInstrExprNull

Cause
INSTRUCTYPTE is None and Expression is null/blank.

Solution
Configure either the Instruction or Expression to be non-null.

3.8.34 2334
Step or Step Output must currently be in the state of Processing in order to confirm the Instruction(s).

Error ID
StepOrOutputProcessingToConfirm

Error name
ProcToConfirm

Cause
Step or Step Output is not currently being processed.

Solution
None

3.8.35 2335
Parameter cannot be changed while the Step is Processing.

254 www.honeywell.com
 3 ERROR CODES

Error ID
CannotChangeWhileStepProcessing

Error name
NoChangeStepProc

Cause
Step is currently being processed.

Solution
None

3.8.36 2336
Output DelayTime feature is only supported along with a valid, non-null Expression configuration.

Error ID
OutputDelayTimeNotApplWithNoExpr

Error name
OpDelayNANoExpr

Cause
Valid expression not configured.

Solution
Either configure a valid expression or do not set DelayTime to non-zero.

3.8.37 2337
Previously confirmed Instruction cannot be confirmed again.

Error ID
CannotConfirmInstructionAgain

Error name
NotConfirm2Err

Cause
Step or Step Output Instruction has already been confirmed.

Solution
None

3.8.38 2338
Step-level confirmation is not enabled.

255
3 ERROR CODES

Error ID
StepConfirmNotEnabled

Error name
StepConfirmNotEnb

Cause
Step STEPICNFMENB parameter is Off.

Solution
Set STEPICNFMENB parameter to On.

3.8.39 2339
Step-level confirmation is not possible when order of all Outputs is enforced.

Error ID
NoStepConfirmWhenAllOutputsOrdered

Error name
NoStepConfirmAllOutput

Cause
Step ENFORCESEQ parameter is set to AllOutputs.

Solution
Set ENFORCESEQ parameter to a value other than AllOutputs.

3.8.40 2340
Indicates that the engineering unit high or low limit is NaN in an EnhRegCalc block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeEnhRegCalcSpEuLoOrHiIsNaN

Error name
EnhRegCalc:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check high and low limits and adjust them as necessary.

256 www.honeywell.com
 3 ERROR CODES

3.8.41 2342
Status returned in the data container passed to clsCfCABProxy::CfStoreVariable on a store to the LOADDATA
parameter.

Error ID
CodeCABLoadedWithInstances

Error name
CABIsLoadedWithInstances

Cause
The block is loaded and there are instances loaded.

Solution
Not applicable.

3.8.42 2343
Special status returned when client tries to write DBLOADCLIENT with own id. But it is already non-null.
Clients can only write own id. ('acquire semaphore') when DBLOADCLIENT is null. In interoperability
scenarios this error code is guaranteed to be different from any pre-Mercury error codes.

Error ID
CodeDBLOADCLIENTSemaphoreDenied

Error name
NonSimCantReadFromSim

Cause
DBLOADCLIENT semaphore is already in use and cannot be acquired by a different client.

Solution
If owning client is out of service wait for time-out and try again.

3.8.43 2344
Status returned if client tries do any load, restore, or delete operation when DBLOADCLIENT parameter is at a
null string value. Load clients must set DBLOADCLIENT to their own unique identifier before attempting any
such operation.

Error ID
CodeDBLOADCLIENTSemaphoreMustBeAcquired

Error name
DBLOADCLIENTNull

257
3 ERROR CODES

Cause
DBLOADCLIENT is null.

Solution
Load clients must write non-null, unique identifier to DBLOADCLIENT before attempting load

3.8.44 2345
This warning is used for internally indicating that a remote (peer) fetch request is currently disabled.

Error ID
CodeRemoteFetchDisabled

Error name
RemFetchDisabled

Cause
This status may be shown for connections of SCMs, RCMs, and Activities. Refer the parameters
OP[x].INCONNSTS, OP[x].STORESTS, C[x].INCONNSTS1, and so on. Also refer parameter PEERALGOPT
in the Control Builder Parameter Reference for more information.

Solution
If the SCM or RCM is inactive, activate the SCM or RCM.
Caution: This creates additional peer-to-peer or OPC traffic.
If this status appears for active SCMs or RCMs, refer to the parameter PEERALGOPT in the Control Builder
Parameter Reference for further information.

3.8.45 2346
Indicates that the CAB .Net Runtime has insufficient memory available to support the operation.

Error ID
CodeInsufficientMemoryAvailableInCAB

Error name
OutOfMemory

Cause
Usually caused during a load operation when the ACE node's available memory limits are reached.

Solution
It may be possible to recover memory by deleting any unused or unnecessary CABlocks. It is likely that the
ACE node has reached it's shutdown horizon and will require reloading to free memory. Refer to section titled
'Determine ACE Shutdown Horizon' for more information.

3.8.46 2347
This warning is reported when the user tries to load a step with a step output configured with both expression
and confirmable instruction.

258 www.honeywell.com
 3 ERROR CODES

Error ID
CodeBothExpressionInstructionNotAllowed

Error name
NonSimCantReadFromSim

Cause
The step output does not support both expression and confirmable instruction at the same time.

Solution
Have the expression and confirmable instruction in two separate outputs in the step.

3.8.47 2348
This warning is reported when the user tries to load a step with a step output configured with both expression
and confirmable instruction.

Error ID
CodeOnlineEnforceSeqChangeInActiveStepNotAllowed

Error name
OnlineEnforceSeqChangeInActiveStepNotAllowed

Cause
The change in the value of EnforceSeq of an active step could result in confusing behaviors. Therefore, Online
Change of EnforceSeq of an active step is not allowed.

Solution
Change the value of EnforceSeq when the Step is not active.

3.8.48 2349
This failure is generated when PERIOD of SCM does not match the configured Peer Age Time.

Error ID
CodeInvalidPeriodForPeerAgeTime

Error name
CodeInvalidPeriodForPeerAgeTime

Cause
The changed PERIOD is lower than PEERAGETIME/8 or greater than PEERAGETIME/1.5.

Solution
Change RERIOD and PEERAGETIME one by one to get the requested values.

259
3 ERROR CODES

3.8.49 2350
The SCM's PeerAlgOpt=AUTO algorithm detected more than 100 handlers.

Error ID
CodeMoreThan100HandlersDetected

Error name
MoreThan100HandlersDetected

Cause
Only the first 100 handlers will be processed by the PeerAlgOpt=AUTO algorithm.

Solution
Use another PeerAlgOpt value.

3.8.50 2351
Platform specific redundancy configuration restriction that does not allow the even Device Index to be
configured for non-redundant operation.

Error ID
CodeEvenDeviceIndexCannotBeNonRedun

Error name
EvenDeviceIndexCannotBeNonRedun

Cause
None.

Solution
None.

3.8.51 2352
Platform specific redundancy configuration restriction that does not allow redundant configuration.

Error ID
CodeCannotConfigNonRedunHardwareAsRedu

Error name
CannotConfigNonRedunHardwareAsRedu

Cause
Attempt to configure a CFIM in a non-redundant IOTA as redundant.

260 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.8.52 2353
User command is not supported.

Error ID
CodeCommandNotSupported

Error name
CommandNotSupported

Cause
Either the command has not yet been implemented or it is not implemented on the targeted platform

Solution
None.

3.8.53 2354
Redundancy related commands are not applicable when target is configured as non-redundant.

Error ID
CodeRedunCmdOnNonRedunNode

Error name
RedunCmdOnNonRedunNode

Cause
User attempted to issue a redundancy related command while target was configured for non-redundant
operation.

Solution
None.

3.8.54 2355
Failure to transition into the primary redundancy role because already there

Error ID
CodeAlreadyInPriRedunRole

Error name
AlreadyInPriRedunRole

Cause
User issues the Become Primary command when already in the requested redundancy role.

261
3 ERROR CODES

Solution
None.

3.8.55 2356
Failure to transition into the primary redundancy role because primary IP address already in use.

Error ID
CodePriIpAddressInUse

Error name
PriIpAddressInUse

Cause
User issues the Become Primary command to node in the secondary role but there already exists a node using
the primary IP address.

Solution
None.

3.8.56 2357
Failure to transition into the standby redundancy role because already there.

Error ID
CodeAlreadyInStbyRedunRole

Error name
AlreadyInStbyRedunRole

Cause
User issues the Enable Standby command when already in the requested redundancy role.

Solution
None.

3.8.57 2358
Failure to transition into the standby redundancy role because must first be synchronized.

Error ID
CodeMustBeSyncdToEnableStby

Error name
MustBeSyncdToEnableStby

Cause
User issues the Enable Standby command when not yet synchronized.

262 www.honeywell.com
 3 ERROR CODES

Solution
Issue the Enable Synchronization command, and after synchronized, retry Enable Standby command.

3.8.58 2359
Cannot commence initial sync due to missing partner.

Error ID
CodeCannotSyncPartnerAbsent

Error name
CannotSyncPartnerAbsent

Cause
Partner is powered down or physically not present.

Solution
None.

3.8.59 2360
Cannot commence initial sync with incompatible partner.

Error ID
CodeCannotSyncIncompatible

Error name
CannotSyncIncompatible

Cause
Refer to RDNCMPT parameter for reason why partner is considered incompatible.

Solution
None.

3.8.60 2361
Module type does not support parameterized synchronization as its default synchronization technique.

Error ID
CodeCannotSyncMigration

Error name
CannotSyncMigration

Cause
Firmware/software difference between primary and secondary partners.

263
3 ERROR CODES

Solution
Restore firmware/software versions on secondary to be compatible with primary.

3.8.61 2362
Warning generated to inform the user that initial sync already in progress.

Error ID
CodeInitialSyncInProg

Error name
InitialSyncInProg

Cause
User issues the Enable Synchronization command while initial synchronization is in progress.

Solution
None.

3.8.62 2363
Must first exit the standby redundancy role before enabling normal synchronization.

Error ID
CodeSecAlreadySyncd

Error name
SecAlreadySyncd

Cause
User issues the Enable Synchronization command while in standby redundancy role.

Solution
Issue the Disable Synchronization command, and retry Enable Synchronization command.

3.8.63 2364
Must first exit the standby redundancy role before enabling normal synchronization.

Error ID
CodeMustDisableStbyFirst

Error name
MustDisableStbyFirst

Cause
User issues the Enable Synchronization command while in standby redundancy role.

264 www.honeywell.com
 3 ERROR CODES

Solution
Issue the Disable Synchronization command, and retry Enable Synchronization command.

3.8.64 2365
Cannot switch redundancy role when not synchronized.

Error ID
CodeMustBeSyncdToSwitch

Error name
MustBeSyncdToSwitch

Cause
User issues the Switch command when not yet synchronized.

Solution
Issue the Enable Synchronization command, and after synchronized, retry Switch command.

3.8.65 2366
Simulation personality cannot be loaded to Controller.

Error ID
CodeSimLoadNotAllowedOnController

Error name
SimLoadNotAllowedOnController

Cause
User configures SIMDEVICEIDX as actual controller device index.

Solution
Change the SIMDEVICEIDX to actual simulation node device index.

3.8.66 2367
This error is reported when the user tries to load a Sync when all parallel paths are not configured in sequence.

Error ID
CodeParallelPathsNotConfiguredInSequence

Error name
ParallelPathsNotConfiguredInSequence

Cause
The Sync does not support Unconnected paths.

265
3 ERROR CODES

Solution
Connect all paths in sequence.

3.8.67 2368
This warning indicates the truncation of String when the length of the String exceeds STRLEN.

Error ID
CodeStringExceedsStrLen

Error name
StringExceedsStrLen

Cause
The Length of the String stored is more than that specified in STRLEN parameter.

Solution
Store a string of String Length <= to the STRLEN specified.

3.8.68 2369
This error indicates that the FTE Bridge is not assigned for a ControlNet IOM being loaded to a C300.

Error ID
CodeMissingFteb

Error name
MissingFteb

Cause
The FTEBBLOCK parameter is empty.

Solution
Delete the module, fill in the FTE Bridge parameter, and load again.

3.8.69 2370
This error indicates that too many IO manager map entries are being requested from the C300 IO Manager
client.

Error ID
CodeMaxC300IomsExceeded

Error name
MaxC300IomsExceeded

Cause
The C300 IO Manager client supports 64 IO map entries, the same limit as the C200 IO Manager.

266 www.honeywell.com
 3 ERROR CODES

Solution
Delete the module from monitoring, remove some other unneeded module, and load this one again after more
map entries are free.

3.8.70 2371
This error indicates that too many IO manager map entries are being requested from the FTEB IO Manager
server.

Error ID
CodeMaxFtebIomsExceeded

Error name
MaxFtebIomsExceeded

Cause
The FTEB IO Manager server supports a limited number of IO map entries.

Solution
Delete the module from monitoring, remove some other unneeded module, and load this one again after more
map entries are free. Alternatively, delete the module from monitoring, assign it to an available FTE Bridge, and
load again.

3.8.71 2372
This error indicates that too many IO manager map entries are being requested from the FTEB IO Manager
server.

Error ID
CodeMaxFtebsExceeded

Error name
MaxFtebsExceeded

Cause
The C300 supports a limited number of FTE Bridge IO Manager connections.

Solution
Load the IO Module via another FTE Bridge if possible or via a CNI link.

3.8.72 2373
This error indicates that the IO module could not be added due to memory constraints on the configuration data.

Error ID
CodeInsufficientConfigMemory

Error name
InsufficientConfigMemory

267
3 ERROR CODES

Cause
The configuration data exceeds the specified allowable size.

Solution
None

3.8.73 2374
A resource arbitration request has been sent to a Control Module, which is not configured to accept such
requests.

Error ID
CodeResourceNotConfigured

Error name
ResourceNotConfigured

Cause
The Control Module is not configured to act as a resource in a resource arbitration scheme.

Solution
Configure the parameter MAXOWNERS to a value >0. This requires a reload of the affected Control Module.

3.8.74 2375
A resource arbitration request has been sent to a Control Module. The request has been placed into the Queue of
the Resource

Error ID
CodeRequestHasBeenQueued

Error name
RequestHasBeenQueued

Cause
The resource is currently in use by other Requesters

Solution
None required. The resource will be granted to the Requester automatically when possible.

3.8.75 2376
A resource arbitration request has been sent to a Control Module. The request could not be processed.

Error ID
CodeRequestCouldNotBeProcessed

268 www.honeywell.com
 3 ERROR CODES

Error name
RequestCouldNotBeProcessed

Cause
• The resource is currently in use by other Requesters.
• The queue is full or is not configured to queue the request
• The resource may be inactive.
• The resource has been just activated and does not accept all requests yet.

Solution
Make sure that the resource is active. For automatic requests, none required. For operator requests: try again
later.

3.8.76 2378
An internal resource arbitration error occurred

Error ID
CodeResourceArbitrationUnknown

Error name
ResourceArbitrationUnknown

Cause
Unknown

Solution
Call Honeywell

3.8.77 2379
Set MODEATTR to OPERATOR is not allowed

Error ID
CodeCannotSetModeAttrToOper

Error name
CannotSetModeAttrToOper

Cause
Any stores of MODEATTR=OPERATOR will be rejected if: SCM has a resource and SCM has been acquired
and acquirer has locked MODEATTR

Solution
Wait until SCM has been released.

269
3 ERROR CODES

3.8.78 2380
Failure to transition into the primary redundancy role because partner already in primary role

Error ID
CodePartnerAlreadyInPrimaryRole

Error name
PartnerAlreadyInPrimaryRole

Cause
User issues the Become Primary command to node in the secondary role but its redundancy partner (that is not
visible on the L1 network) is already in the primary role.

Solution
None.

3.8.79 2381
Controller does not have a valid time source. For example, GPS, SNTP, or CDA.

Error ID
CodeControllerHasNoTimeSource

Error name
ControllerHasNoTimeSource

Cause
Controller does not have access to a time source, so controller does not know current wall clock time.

Solution
Provide controller connectivity to a time source and the error will go away.

3.8.80 2382
Type conversion is not allowed.

Error ID
CodeTypeConvNotAllowed

Error name
TypeConvNotAllowed

Cause
Attempted unsupported or impossible implicit data type conversion between different data types at source and
destination parameter. Engineering error or attempt to use non-existing functionality. Examples:

270 www.honeywell.com
 3 ERROR CODES

1. Implicit conversion of numbers to and from strings is not supported

2. Implicit conversion of numbers to and from time types is not supported
3. Many other conversions are not possible.

Solution
Change configuration. Use string or time functions in expressions, if one of the data types is number type (float,
integer) and the other is string or time.

3.8.81 2383
Type conversion failed. Source value does not fit into the range of the target data type.

Error ID
CodeDataTypeRangeErr

Error name
DataTypeRangeErr

Cause
Implicit data type conversion into a data type with insufficient capability for the specific value. Examples are:
1. Converting an integer or float into an integer with fewer bits (for example, INT8 cannot hold a value of
1000, if 1000 is converted from INT32 to INT8 this error will occur)
2. Converting an integer into a Boolean for any value except 0 and 1
3. Converting an integer into an enumeration with value too large for any enumeration or value being negative.
4. Converting a negative number into an unsigned integer.

Solution
Change the configuration to avoid the non-convertable values or use a different data type for the destination
parameter.

3.8.82 2384
NaN cannot be converted into the requested data type.

Error ID
CodeCannotConvertNaN

Error name
CannotConvertNaN

Cause
Attempted implicit data type conversion of NaN into an integral data type (integer, Boolean, enumeration).
These data types have no support for NaN representation. Loss of information would occur, if NaN would be
converted to an arbitrary value (for example, 0). This value would be indistinguishable from a valid value.

Solution
1. Avoid NaN in the source parameter
2. Do not convert Float values to integral data types, if NaN , +INF or -INF can occur in the Float parameter.

271
3 ERROR CODES

3. Use step output or AuxCalc expressions instead for conversions and add special NaN handling in the
expression.

3.8.83 2385
+/-INF cannot be converted into the requested data type.

Error ID
CodeCannotConvertINF

Error name
CannotConvertINF

Cause
Attempted implicit data type conversion of an infinite value (infinity) into an integral data type ( integer , bool ,
enumeration ). These datatypes have no support for INF representation. Loss of information would occur, if INF
would be converted to an arbitrary value (for example, +/- MAX_INT). This value would be indistinguishable
from a valid value.

Solution
1. Avoid INF in the source parameter
2. Do not convert Float values to integral data types, if NaN , +INF or -INF can occur in the Float parameter
3. Use step output or AuxCalc expressions instead for conversions and add special INF handling in the
expression.

3.8.84 2386
Rounding has become necessary by data type conversion.

Error ID
CodeTypeConversionWithRounding

Error name
TypeConversionWithRounding

Cause
Implicit data type conversion of a floating point value to an integral data type (integer, bool, enumeration). The
fractional part of the floating point value has been lost.

Solution
It is the responsibility of the user to assess the impact of rounding. This can be a desired or undesired behavior.
Undesired rounding can be caused by engineering errors and shall be rectified by changing the configuration. If
the rounding is desired no action is required.

3.8.85 2387
Data type conversion processed with loss of precision.

272 www.honeywell.com
 3 ERROR CODES

Error ID
CodeLossOfPrecision

Error name
LossOfPrecision

Cause
Implicit data type conversion of an integer value into a floating point value. The integer value converted was too
large in absolute value to fit into the available memory at the destination parameter due to its data type. If the
float value would be converted back to an integer value, the result would be different than the original value.
Value falsification may occur if float values are used for transportation of integer values.

Solution
It is the responsibility of the user to assess the impact of loss of precision. This can be a desired or undesired
behavior. Undesired loss of precision can be caused by engineering errors and shall be rectified by changing the
configuration. If the loss of precision is desired or can be tolerated no action is required.

3.8.86 2388
Source string is too long to be stored into target string parameter or variable.

Error ID
CodeConversionStringTooLong

Error name
ConversionStringTooLong

Cause
Attempted copy of a longer string into a shorter string. The destination parameter does not provide enough
memory to hold the value.

Solution
Change the configuration to avoid too long strings or to provide more memory (greater string length) at the
destination parameter.

3.8.87 2389
An unexpected internal error occurred.

Error ID
CodeInternalError

Error name
InternalError

Cause
A serious software (build) problem may exist.

273
3 ERROR CODES

Solution
None. Call Honeywell TAC for further investigation.

3.8.88 2390
The amount of Requesters exceeds the max allowed number.

Error ID
CodeTooManyRequesters

Error name
TooManyRequesters

Cause
Too many resources have to be acquired inside the same RCM.

Solution
Change the configuration. Reduce the number of required resources.

3.8.89 2391
This failure is generated when SealIn Option is enabled without Cmd Disagree alarm time configured.

Error ID
Command Disagree Alarm is not configured.

Error name
Cmd Disagree Alarm is not configured.

Cause
Cmd Disagree alarm time is set to 0.

Solution
Set Cmd Disagree alarm time to a nonzero value.

3.8.90 2392
The process transfer function model is invalid and cannot be used for control. Typically, this is due to a model
process gain of zero, or lack of model dynamics.

Error ID
CodePIDPLInvalidModel

Error name
PIDPLInvalidModel

Cause
Entered transfer function model is invalid and cannot be used for control.

274 www.honeywell.com
 3 ERROR CODES

Solution
Use the configuration graphics to enter or re-enter a valid process model. Model configuration graphics are
found on the Advanced tab of Control Builder form or Detailed Display.

3.8.91 2393
The amount of concurrent IEC commands to the same common resource exceeds system capacity. The Control
Module does not have enough memory to manage additional IEC commands at this time. To determine the
current demand on the Control Module the following factors need to be considered.
• Number of RCMs, SCMs, or Activities owning the resource.
• Number of steps running in parallel in each of those SCMs, RCMs, and Activities.
• Number of outputs with IEC output being executed for each of the active steps.
Note:Outputs with OPTYPE=NULL do not affect this behavior at all.

Error ID
CommonResourceBufferLimit

Error name
CommonResourceBufferLimit

Cause
The system has pre-allocated a fixed amount of memory. All this memory is currently in use.

Solution
The system recovers automatically from this condition, if one or multiple requests are not available. This error
occurs if
• Transitions following the active steps become true.
• Outputs are bypassed.
• The number of threads are reduced when execution traverses through a sync object.
• One or multiple RCMs, SCMs, and ACTs release the resource (for example, after Abort).
If this error condition occurs repeatedly in the same plant configuration, the problem can only be avoided by re-
engineering. This change can reduce the number of concurrent requests to the same resource by serializing some
outputs, which had been performed in parallel.
Contact TAC if the system limit is too small for a particular application.

3.8.92 2394
The Control Module has detected a 1/0 edge for a parameter commanded by IEC output without having detected
a matching 0/1 edge

Error ID
CodeCommonResourceIECGoingUnknown

Error name
CommonResourceIECGoingUnknown

Cause
Unknown. Should not happen in normal system operation.

275
3 ERROR CODES

Solution
Contact TAC

3.8.93 2395
The Control Module has received a command which it cannot handle.

Error ID
CodeUnknownIECCommand

Error name
UnknownIECCommand

Cause
1. Unknown, if SCM/RCM/ACT and CM are in the same controller.
2. Unknown, if SCM/RCM/ACT and CM are in different controllers operating with the same firmware version.
3. Firmware mismatch, if SCM/RCM/ACT and CM are in different controllers operating with different
firmware versions.

Solution
If the cause is unknown, contact TAC.
If the cause is a firmware mismatch, then upgrade the firmware to run all the controllers with the same major
release.

3.8.94 2396
The Control Module has received a command without effect.

Error ID
CodeIECOutputIgnoredWarning

Error name
IECOutputIgnoredWarning

Cause
1. Normal scenario if RCM, SCM, or ACT has re-executed the same step a second time. Example: Restart after
Hold, step has outputs of type S_IEC or R_IEC.
2. Possibly questionable engineering.
This status occurs, if the same step contains two or more outputs where the following options are true:
• The outputs have the same IEC action qualifier specified by the parameter OPTYPE.
• The outputs have the same destination parameter (of the form CM.FB.PAR or CM.PAR).
• The outputs are executed at the same time.
Note:Outputs are not counted so that they can be executed at the same time if the following occurs.
• If the result of a conditional expression is NOP
• If the output is bypassed.

276 www.honeywell.com
 3 ERROR CODES

Solution
None required.
For cause 2, remove unnecessary outputs. This reduces controller memory and CPU usage.

3.8.95 2397
The Control Module has been configured to use ModeAttr processing and the parameter configured in
MODEATTRREF does not have a value of PROGRAM or its numerical equivalent (2).

Error ID
CodeResourceNotInProgram

Error name
ResourceNotInProgram

Cause
1. MODETRACK of RCM/SCM/MR does not match operational requirements.
2. If the parameter has changed the parameter value of the parameter referenced by MODEATTRREF to a
value not equal to PROGRAM or 2 respectively.

Solution
This is either an engineering or operational problem.
The operator may simply change this parameter to OPERATOR or 1 respectively (if sufficient access rights
exist).
If MODETRACK=NONE (at SCM/RCM/MR), the engineer may consider a different value for MODETRACK.

3.8.96 2398
This error is generated when user tries to change PID mode after Mode shed due to Manual PV.

Error ID
CodePvManError

Error name
PvManError

Cause
PvManOpt is configured to shed mode on Manual PV and changing mode shall not be allowed.

Solution
Set PvManOpt to NoShed.

3.8.97 2399
The new SCM/RCM/ACT command is executed possibly with a delay, because an IEC-Output is not yet
finished. It remains pending, until all IEC-Outputs have completed processing or until a command/event of
higher priority is detected.

277
3 ERROR CODES

Error ID
CodePendingCommandDueToIEC

Error name
Pending command due to unfinished IEC-Output.

Cause
• When RCM/SCM/ACT is HOLDING (with active IEC-Output) and a STOP or ABORT command is issued.
• When RCM/SCM/ACT is STOPPING (with active IEC-Output) and an ABORT command is issued.
• When RCM/SCM/ACT is RESTARTING (with active IEC-Output) and a HOLD, STOP or ABORT
command is issued.
The resulting delay depends on several configuration options.
In non-peer scenarios (SCM/RCM/ACT and device-CMs are in the same controller), the delay should be
negligible unless there is a problem with the device-CM (for example, wrong MODEATTR) which may require
operator intervention.
In peer-to-peer scenarios the delay is largely dependent on the response time required for communication.
If step output order is enforced, additional delays may occur.
Related parameters are: OPTYPE, PERIOD, MODEATTR, MODETRACK, SCMOPT, ENFORCESEQ.

Solution
None

278 www.honeywell.com
 3 ERROR CODES

3.9 Codes 2400 to 2601

Related topics
“2400” on page 280
“2401” on page 280
“2402” on page 281
“2403” on page 281
“2404” on page 282
“2405” on page 282
“2406” on page 282
“2407” on page 283
“2408” on page 283
“2409” on page 284
“2410” on page 284
“2411” on page 284
“2412” on page 285
“2413” on page 285
“2414” on page 285
“2415” on page 286
“2416” on page 286
“2417” on page 287
“2418” on page 287
“2419” on page 287
“2420” on page 288
“2421” on page 288
“2422” on page 288
“2423” on page 289
“2424” on page 289
“2425” on page 290
“2426” on page 290
“2427” on page 290
“2428” on page 291
“2429” on page 291
“2430” on page 291
“2431” on page 292
“2432” on page 292
“2433” on page 292
“2435” on page 293
“2436” on page 293
“2437” on page 294
“2438” on page 294
“2439” on page 294
“2440” on page 295
“2441” on page 295
“2442” on page 295
“2443” on page 296
“2444” on page 296

279
3 ERROR CODES

“2445” on page 296

“2446” on page 297
“2447” on page 297
“2448” on page 298
“2449” on page 298
“2450” on page 299
“2451” on page 299
“2452” on page 299
“2453” on page 300
“2454” on page 300
“2455” on page 300
“2456” on page 301
“2457” on page 301
“2458” on page 301
“2459” on page 302
“2460” on page 302
“2461” on page 303
“2462” on page 303
“2463” on page 304
“2464” on page 304
“2465” on page 304
“2466” on page 305
“2467” on page 305
“2468” on page 306
“2600” on page 306
“2601” on page 306

3.9.1 2400
Indicates that the same step/phase is stored in multiple threads.

Error ID
CodeSameStepInMultipleThreads

Error name
SameStepInMultipleThreads

Cause
1. In the table view GOTO dialog box, same step/phase is stored in multiple targets.
2. Trying to store same step/phase into multiple indexes of the following parameters RESADDR[i],
RESADDRN[i] and RESADDRFUTRN[i].

Solution
For the SCM/RCM/ACT parameters to jump out of a parallel branch to a single step/phase, only one of the
parallel paths should be stored as the required step block while the other path should be NULL.

3.9.2 2401
Indicates that a requester is used by more than one client at the same time (peer-to-peer only).

280 www.honeywell.com
 3 ERROR CODES

Error ID
CodeRequesterBusy

Error name
RequesterBusy

Cause
1. Several outputs of the same step are trying to store IEC-Commands to the same Control Module.
2. A manual store to REQFL/RELFL is performed when IEC-Outputs are processed to the same requester at
the same time.

Solution
1. For cause 1, none.
2. For cause 2, try to store REQFL/RELFL again.

3.9.3 2402
This error is generated when a Resume command is issued and the RCM/SCM/ACT execution is not paused.

Error ID
CodeExecStsNotPaused

Error name
ExecStsNotPaused

Cause
1. The step did not get 'Active', because one or more step outputs failed and the retry processing is not yet
finished.
2. The step did not get 'Active', because the exit processing of one or more IEC-Outputs is still active.
3. The phase block did not get 'Active', because the underlying equipment has not reached its target state.

Solution
1. For cause 1, wait until the step gets 'Active', enter the Cancel command, or bypass the failed outputs.
2. For cause 2, wait until the step gets 'Active' or enter Cancel command. Do not bypass the IEC-Output.
3. For cause 3, wait until the phase block gets 'Active' or enter Cancel command.

3.9.4 2403
The new RCM command is executed possibly with a delay, because a Phase with UPDRESOPT = FALSE has
not yet finished.
It remains pending, until all Phases with UPDRESOPT = FALSE have completed processing or until a
command/event of higher priority is detected.

Error ID
CodePendingCommandDueToPhase

Error name
PendingCommandDueToPhase

281
3 ERROR CODES

Cause
UPDRESOPT of a currently active Phase equals FALSE and a HOLD, STOP or ABORT command is issued.
The resulting delay depends on several configuration options. In non-peer scenarios (RCM, Activity, and
controlled SCMs are in the same controller). The delay should be negligible unless there is a problem with the
controlled SCM (for example, wrong MODEATTR ) which may require operator intervention.
In peer-to-peer scenarios the delay is largely dependent on the latency times needed for communication.

Solution
None

3.9.5 2404
RCM or Activity was not able to propagate the MODE change to all equipment modules, that are currently
controlled by RCM's or Activity's Phase blocks. That is, at least one SCM, RCM, or Activity controlled by the
phase(s) of the RCM or Activity may remain in ModeAttr=OPERATOR state.
This prevents further progression of the RCM or Activity.

Error ID
CodeModeChangeNotPropagated

Error name
ModeChangeNotPropagated

Cause
The store request for atleast one underlying equipment module was denied due to another pending store.

Solution
You should manually set ModeAttr of SCMs/RCMs/ACTs to PROGRAM to facilitate control by phase block.
A review of the configuration parameter MODETRACK is recommended.
If this problem occurs frequently or reproducibly without apparent engineering errors, contact Honeywell TAC.

3.9.6 2405
This warning was generated because LOCUTOFF had to be clamped as it's valid limit.

Error ID
CodeLOCUTOFFLoClamped

Error name
LOCUTOFFLoClamped

Cause
A strategy was loaded that included LOCUTOFF overlap with PVEULO. Revise LOCUTOFF or the PV limits
to a valid orientation and reload.

3.9.7 2406
Indicates that the ROLLAVG FB load operation was stopped because frequency is greater than buffer specified.

282 www.honeywell.com
 3 ERROR CODES

Error ID
CodeFREQUENCYGTBUFFERERROR_E

Error name
FREQUENCYGTBUFFERERROR_E

Cause
The frequency divided by PERIOD is greater than 3800.

Solution
Change ROLLFREQ or CM PERIOD. Attempt reload.

3.9.8 2407
This warning was generated because OPHIALM.DB had to be clamped as it's valid limit.

Error ID
CodeOPHIALMDBClamped

Error name
OPHIALMDBClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced OPHIALM.DB to be clamped at the
valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

3.9.9 2408
This warning was generated because OPLOALM.DB had to be clamped as it's valid limit.

Error ID
CodeOPLOALMDBClamped

Error name
OPLOALMDBClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced OPLOALM.DB to be clamped at the
valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

283
3 ERROR CODES

3.9.10 2409
This warning was generated because ADVDEVALM.DB had to be clamped as it's valid limit.

Error ID
CodeADVDEVALMDBClamped

Error name
ADVDEVALMDBClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced ADVDEVALM.DB to be clamped at
the valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

3.9.11 2410
Indicates that the ROLLAVG FB load operation was stopped because frequency size is not a multiple of CM
PERIOD specified or it is too small.

Error ID
CodeFREQUENCYSPANERROR_E

Error name
FREQUENCYSPANERROR_E

Cause
The frequency size is not a multiple of CM PERIOD specified.

Solution
Change ROLLFREQ or PERIOD. Attempt reload.

3.9.12 2411
This warning was generated because DEVHIALM.DB had to be clamped as it's valid limit.

Error ID
CodeDEVHIALMDBClamped

Error name
DEVHIALMDBClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced DEVHIALM .DB to be clamped at the
valid limit.

284 www.honeywell.com
 3 ERROR CODES

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary.

3.9.13 2412
This warning was generated because DEVHIALM.DB had to be clamped as it's valid limit.

Error ID
CodeDEVLOALMDBClamped

Error name
DEVLOALMDBClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced DEVHIALM .DB to be clamped at the
valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

3.9.14 2413
This warning was generated because SPTV had to be clamped as its valid limit.

Error ID
CodeSPTVClamped

Error name
SPTVClamped

Cause
An alarm strategy was loaded that included an alarm overlap that forced SPTV to be clamped at the valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

3.9.15 2414
This warning was generated because DEVHIALM.TP had to be clamped as it's valid limit.

Error ID
CodeDEVHIALMTPClamped

Error name
DEVHIALMTPClamped

285
3 ERROR CODES

Cause
An alarm strategy was loaded that included an alarm overlap that forced DEVHIALM.TP to be clamped at the
valid limit.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values before load so that clamping is not
necessary

3.9.16 2415
Indicates that an attempt was made to access the activity parameter data. Connection references to activity
parameter data are invalid.

Error ID
CodeBindingError

Error name
BindingError

Cause
1. A reference is provided to an activity block parameter.
2. If this error occurs in a Control Recipe (activity, procedure, or batch), this can be caused by an unselected
unit referenced in an expression.

Solution
1. Remove all references to the activity specific parameters.
2. Ensure that all required units for the current execution context are selected. In most Master Recipe
configuration, the execution recovers automatically. However, with some Master Recipe configuration, the
failed expression has to be triggered to be re-executed (For example, by holding and restarting the control
recipe or by For example, by holding and restarting the control recipe or by temporarily changing Mode to
SingleStep). For more information, refer to the parameter RETRYOPT.

3.9.17 2416
Indicates that an attempt was made to associate an activity with an SCM/RCM/MR that does not exist.

Error ID
CodeAssocEntityIOCError

Error name
AssocEntityIOCError

Cause
The SCM/RCM/MR was removed when the activity was being created.

Solution
Reload the SCM/RCM/MR and restart it. A new activity is created.

286 www.honeywell.com
 3 ERROR CODES

3.9.18 2417
Indicates that a create request was sent to an activity that is already in use or that did not load properly.

Error ID
CodeActAlreadyInUse

Error name
ActAlreadyInUse

Cause
This error should never be seen. It indicates that CAM is out of sync with the activities which are in use and
with the activities which are not in use.

Solution
Change the state of the CEE to idle and restart the CEE. If the problem persists, contact Honeywell TAC.

3.9.19 2418
Indicates that the requested ActCommand is invalid based on the current state of the activity.

Error ID
CodeInvalidActCommand

Error name
InvalidActCommand

Cause
You or a program issued a command that does not comply with the activity state diagram.

Solution
There may be an intermediate command that needs to be issued. For example, if the activity is in the Executing
state, then the Remove command is invalid. The SCM/RCM that it is associated with must be stopped so that
the activity transitions to the post-execution state. From the post-execution state, the Remove command is valid.

3.9.20 2419
Indicates that the request received is for an activity with a different activity ID than the value the requester
holds.

Error ID
CodeInvalidDataRequest

Error name
InvalidDataRequest

287
3 ERROR CODES

Cause
This may be a result of old data from a display or requesting data when a recovery is in progress. The activity
this request was intended for, no longer exists.

Solution
Wait until recovery is complete or refresh displays. Most likely the activity point is deleted.

3.9.21 2420
CEEs internal memory was not allocated for Activities.

Error ID
CodeCAMmemnotAllocated

Error name
CAMmemnotAllocated

Cause
NUMACT is not greater than 0 or the CEE was out of memory for the allocation.

Solution
Increase the number of Activities if it is zero and reload.

3.9.22 2421
CEEs internal activity memory was not allocated because the CEE does not have enough function block
memory.

Error ID
CodeNotEnoughMemforNUMACT

Error name
NotEnoughMemforNUMACT

Cause
There is not enough free memory in the controller for Activities.

Solution
Ensure that there is enough free memory in CEE (refer parameter FREEMEM) and then reload.

3.9.23 2422
CEE cannot create an Activity due to TotalActCAp has been reached.

Error ID
CodeOutofActivities

288 www.honeywell.com
 3 ERROR CODES

Error name
OutofActivities

Cause
When a new Activity is created from either an RCM or an SCM or an SAM and does not have space for
additional Activity.

Solution
Increase the number of Activities in the CEE. If the NUMACT is at the maximum number of Activities for a
CEE try to re-distribute your strategy or remove Activities from the Activity summary.

3.9.24 2423
There is not enough space in the CEE activity buffer for the number of loaded Activities.

Error ID
CodeAMRegisterRejected

Error name
AMRegisterRejected

Cause
Internal error - Too many Activities have tried to register than the CEE had space for.
Another possible cause is an ERDB restore and ghost activity blocks exist in the controller.

Solution
Idle and reload the CEE. If that does not work, reduce the number of activities in the controller and reload.
If an ERDB restore was performed, run the ERDB consistency checker and remove ghost activity blocks and
reload.

3.9.25 2424
This warning was generated because the loaded configuration is such that PVEULO Limit Exceeds PVEUHI
Limit.

Error ID
CodePVEULOExceedsPVEUHI

Error name
PVEULOExceedsPVEUHI

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

289
3 ERROR CODES

3.9.26 2425
This warning was generated because the loaded configuration is such that PVEXLOLM Trip point Exceeds
PVEULO Limit.

Error ID
CodePVEXLOLMExceedsPVEULO

Error name
PVEXLOLMExceedsPVEULO

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.27 2426
This warning was generated because the loaded configuration is such that PVEULO Trip point Exceeds
PVLLALM Trip point.

Error ID
CodePVEULOExceedsPVLLALM

Error name
PVEULOExceedsPVLLALM

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.28 2427
This warning was generated because the loaded configuration is such that PVEULO Limit Exceeds PVLOALM
Trip point.

Error ID
CodePVEULOExceedsPVLOALM

Error name
PVEULOExceedsPVLOALM

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

290 www.honeywell.com
 3 ERROR CODES

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.29 2428
This warning was generated because the loaded configuration is such that P PVEULO Limit Exceeds
PVHIALM Trip point.

Error ID
CodePVEULOExceedsPVHIALM

Error name
PVEULOExceedsPVHIALM

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.30 2429
Cannot load CAB Type. CAB Runtime is disabled.

Error ID
EXPKS_E_NONFATAL

Error name
NONFATAL

Cause
The Enable CAB Runtime check box in the CAB Types Info tab on the CEEC300 configuration form is
disabled (not selected).

Solution
Enable (select) the Enable CAB Runtime check box in the CAB Types Info tab on the CEEC300 configuration
form.

3.9.31 2430
This warning was generated because the loaded configuration is such that PVHIALM Trip point Exceeds
PVHHALM Trip point.

Error ID
CodePVHIALMExceedsPVHHALM

Error name
PVHIALMExceedsPVHHALM

291
3 ERROR CODES

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.32 2431
This warning was generated because the loaded configuration is such that PVLLALM Trip point Exceeds
PVLOALM Trip point.

Error ID
CodePVLLALMExceedsPVLOALM

Error name
PVLLALMExceedsPVLOALM

Cause
An alarm strategy was loaded that included an illegal alarm trip point crossover.

Solution
Revise the alarm limits, PV limits, and/or deadbands to valid values so that the FB can be loaded.

3.9.33 2432
Access to data in the controller was not allowed because the request did not pass a compatibility check.

Error ID
CodeInvalidOpaqeType

Error name
InvalidOpaqeType

Cause
This error occurs because of a newer Server release communicating with an older release on a controller or data
corruption has occurred.

Solution
Ensure that all the firmware and server Software are on compatible releases. If the problem persists, contact
Honeywell TAC.

3.9.34 2433
Access to the data in the controller was not allowed because the request contained conflicting information.

Error ID
CodeOpaqueSizeTypeMismatch

292 www.honeywell.com
 3 ERROR CODES

Error name
OpaqueSizeTypeMismatch

Cause
Data corruption has occurred.

Solution
If the problem persists, contact Honeywell TAC.

3.9.35 2435
Indicates that the SCM/RCM/MR you are trying to associate an activity with is inactive. The SCM/RCM/MR
needs to be active in order to associate with an activity.

Error ID
CodeAssocEntityInactive

Error name
AssocEntityInactive

Cause
SCM/RCM/MR is inactive.

Solution
Activate the SCM/RCM/MR.

3.9.36 2436
The RCM/SCM/MR does not allow itself to transition to inactive if there is any Activity associated with the
RCM/SCM/MR.

Error ID
CodeActivitiesAssociated

Error name
ActivitiesAssociated

Cause
RCM/SCM/MR maintains a count that is incremented on the activity creation and decremented on activity
removal.

Solution
1. Ensure that there are no activities associated with RCM/SCM/MR. That is, the activities are not in Exec or
Pre-Exec state from the activity summary display.
2. If the activity is in Exec state, wait till the activity completes the execution. That is, the activity reaches
Post-Exec state and the activity is removed.
3. Remove the activities which are in Pre-Exec state.
4. Ensure the parameter NUMASSOCACT equals zero, which is displayed in the module properties of
RCM/SCM/MR block.

293
3 ERROR CODES

5. Once the value is zero, RCM/SCM/MR can be inactivated.

3.9.37 2437
Indicates that jump targets are not configured but the JumpSafeEnb of RCM/SCM/ACT is true. This indicates
that the safe jump is enabled but the jump targets are not configured which is of no use.

Error ID
JumpTargetsNotConfigured

Error name
JumpTargetsNotConfigured

Cause
1. Since the safe step mode is selected for jump operation, targets and paths must be configured for the jump to
be successful. This error appears since jump targets are not configured.
2. When executing RCM/SCM/ACT, if jump targets are not configured and the jump targets are entered in
TargetSteps list in safe step mode.

Solution
1. For cause 1, optionally you can configure the jump targets or set the JumpSafeEnable option to false.
2. For cause 2, SafeStep Jump cannot be performed as jump targets are not configured. You can select
Singlestep for the jump operation to continue.

3.9.38 2438
You cannot choose SafeJump mode.

Error ID
CodeSafeJumpInvalid

Cause
This error occurs when JumpSafeEnb parameter is OFF, and you try to select Mode as SafeStep.

Solution
Set the JumpSafeEnb parameter on RCM Main tab to ON and then change the mode to SafeStep.

3.9.39 2439
Manual selection of Jump Targets in the Chart View or the Detail Display may result in an invalid Jump Target
to be submitted to the CEE. Invalid Jump Target is reported when it does not match with any of the Jump Target
configurations.

Error ID
InvalidTargetStepsconfigured

Cause
In Safe Step mode, you can jump only to the

294 www.honeywell.com
 3 ERROR CODES

pre-validated jump targets specified in the Jump Targets tab during configuration of a handler. If given any other
combination, this error appears.

Solution
Select Mode as Single Step option and try to Jump to the required target.

3.9.40 2440
Indicates that the Batch ID is blank for an activity with a type of Batch.

Error ID
CodeBatchIDRequired

Error name
BatchIDRequired

Cause
A Batch ID is not provided for a batch type activity during the activity creation.

Solution
• Enter the Batch ID when an activity is created.
• Select Automatically Generate Batch ID on the Batch Preference form for the activity created through
Activity Summary Display.
• Change the activity type from Batch to Procedure on the Activities tab for SCM/RCM/MR.

3.9.41 2441
Indicates that an attempt was made to change a Batch ID after the activity is created.

Error ID
CodeBatchIDReadOnly

Error name
BatchIDReadOnly

Cause
A request is made to change the Batch ID of an existing activity.

Solution
Remove the activity, and then create a new activity to change the Batch ID.

3.9.42 2442
The connection value cannot be retrieved because the source value required for binding is NULL.

Error ID
CodeIndirectRefSrcNULLValue

295
3 ERROR CODES

Error name
IndirectRefSrcNULLValue

Cause
The source value for binding is NULL.
Note, an example of a NULL source value is a unit that is not selected.

Solution
Set the source value.

3.9.43 2443
The indirect reference value is NULL.

Error ID
CodeIndirectRefNULLValue

Error name
IndirectRefNULLValue

Cause
The indirect reference value is NULL.
Note, an example of a NULL source value is a unit that is not selected.

Solution
Set the reference value.

3.9.44 2444
The indirect reference source has been read, but it not active, and no value is available.

Error ID
CodeIndirectRefInActiveWarning

Error name
IndirectRefInActiveWarning

Cause
The value is read when it is not active.

Solution
Read the value when it is active.

3.9.45 2445
The indirect reference source is waiting for a value.

296 www.honeywell.com
 3 ERROR CODES

Error ID
CodeIndirectRefSrcWaiting

Error name
IndirectRefSrcWaiting

Cause
The indirect reference value is not available, most likely because there is a delay in fetching the value from
another controller.

Solution
Check indirect reference table for the source of error.

3.9.46 2446
The parameter cannot be written because the value is read-only in a Master recipe.

Error ID
CodeReadOnlyMRParam

Error name
ReadOnlyMRParam

Cause
A change to a read-only Master recipe parameter was requested.

Solution
1. Change the value on the Project view and reload the Master recipe.
2. Ensure to invoke detail displays, chart view, and other operational displays on the activity points rather than
Master recipe points, if online parameter modifications are intended.
3. External applications may interact with activity points of Control recipes at runtime.

3.9.47 2447
An attempt was made to download or activate a Master recipe with unsupported configuration.

Error ID
CodeUnsupportedForMR

Error name
UnsupportedForMR

Cause
Usage of interrupt condition at step(s) in a Master recipe.
A direct reference using tagname.parameter syntax to a common device was used in an expression with
OP.TYPE = N_IEC , S_IEC or R_IEC in a master recipe. This functionality is not supported by the controller
firmware version.

297
3 ERROR CODES

Solution
Ensure that IC.OPT is FALSE for steps in a Master recipe and then reload the Master recipe.
Use indirect references through Map blocks to configure expressions to command common devices in the
master recipes. Since the intent of a direct reference is to be unit selection independent, the Map block reference
must be defined in the unit class instead of the individual unit control modules. This is to ensure data coherence
without data duplication effort when the control recipes operate with different unit selections. In addition, a
valid unit selection has been made while operating the control recipes. If an existing unit class cannot be used to
replace a direct reference (e.g. because unit selection has not been made yet before that step output execution ) a
helper unit must be created to contain all required fixed references required by one or more master recipes.

3.9.48 2448
Activities are not created for RCM/SCM/MR. You need to configure Number Of Activities in the CEE Batch
tab, if you select Auto, User or App, or All for RCM/SCM and User or App for Master recipe in the Activity
Creation option list.

Error ID
ActivityNotConfiguredInCEE

Error name
ActivityNotConfiguredInCEE

Cause
Number Of Activities is configured as zero in the CEE Batch tab.

Solution
1. Configure the Number Of Activities to a value greater than zero. The default value is zero.
2. Load the CEE and RCM/SCM/MR.
3. If the loaded CEE is not appropriate, then the activity creation can be delayed. However, the SCMs and
RCMs continue to function normally but MRs does not function normally based on the embedded controller
functionality and displays using tag-names Batch/Activity UI. The other system functions depending on the
activities are not available until the CEE has been loaded with Number of Activities greater than zero.
4. If the activity-related functions are not required, set the Activity Creation option to 'NONE'.

3.9.49 2449
The number of units configured is zero.

Error ID
NumUnitsNotConfigured

Error name
NumUnitsNotConfigured

Cause
The parameter NUMUNITS for Master recipe is configured as zero.

Solution
Set the NUMUNITS of Master recipe to > 0 and then reload.

298 www.honeywell.com
 3 ERROR CODES

3.9.50 2450
A 'Load While Active' is performed and it is not supported for this parameter.

Error ID
CodeLoadWhileActiveNotSupported

Error name
LoadWhileActiveNotSupported

Cause
A 'Load While Active' to a previous release controller was performed where 'Load While Active' for this
parameter is not supported. This indicates that these parameter values do not change because of the 'Load While
Active' operation.

Solution
You can decide to continue executing the parameter as is or if you want to change that particular value, reload
the block and then perform the 'Load While Active' operation.

3.9.51 2451
The connection only supports local to Master recipe. That is, the connection must be to a parameter of this
Master recipe or a parameter of a block in this Master recipe.

Error ID
CodeMustBeLocalToMR

Error name
MustBeLocalToMR

Cause
A connection reference was configured that is outside this Master recipe.

Solution
Change the connection to be a parameter of this Master recipe or a parameter of a block in this Master recipe.

3.9.52 2452
The block that the parameter resides on is not created.

Error ID
CodeCompBlockNotCreated

Error name
CompBlockNotCreated

299
3 ERROR CODES

Cause
1. Trying to access a parameter of the data block on the activity when the activity is in the initializing stage.
2. Trying to access the parameter of a component block on the Control recipe which is not created.

Solution
1. For cause 1, try to access the parameter after the activity is in pre-execution stage.
2. For cause 2, none

3.9.53 2453
Store of Unit failed due to Validation failure.

Error ID
UnitValidationFailed

Error name
UnitValidationFailed

Cause
1. New unit does not belong to the Unit class configured in the same index in the Master recipe.
2. Current unit is passed to the active phase of this recipe.

Solution
1. Configure a unit derived from the Unit class configured in the same index in the Master Recipe.
2. Wait until the active phase completes execution.

3.9.54 2454
Store of Unit failed because the previous unit was already acquired.

Error ID
UnitStoreFailed

Error name
UnitStoreFailed

Cause
Previous unit configured in the same index is already acquired.

Solution
None. Unit once obtained cannot be replaced by another unit in the current execution of the Control recipe.

3.9.55 2455
User-created activity cannot be created for this MR/RCM.

Error ID
UserCreateACTCannotbeCreated

300 www.honeywell.com
 3 ERROR CODES

Error name
UserCreateACTCannotbeCreated

Cause
The ActOpt is configured as Auto and hence user-created activity cannot be created.

Solution
Change the ActOpt to 'All' or 'UserorApp' to create a UserCreatedActivity.

3.9.56 2456
Unit acquisition failed because Unit instance is not selected.

Error ID
UnitNotSelected

Error name
UnitNotSelected

Cause
There is no unit selected which can be acquired when Control recipe is doing Unit acquisition.

Solution
Select a unit which has been configured for acquisition.

3.9.57 2457
Unit acquisition is queued as the unit is already obtained by another recipe.

Error ID
UnitBeingAcquired

Error name
UnitBeingAcquired

Cause
This is a warning message mentioning that the requester is in a waiting queue and the unit is already obtained
by another recipe.

Solution
Wait until the unit becomes free.

3.9.58 2458
Activity is not in a valid state for the Unit selection.

Error ID
InvalidActStateUnitSel

301
3 ERROR CODES

Error name
InvalidActStateUnitSel

Cause
Unit selection is allowed only in pre-execution and execution states of the Activity.

Solution
None

3.9.59 2459
SCM, RCM, or CR is not in a state where this command is allowed.

Error ID
CommandNotAllowedInCurrentState

Error name
CommandNotAllowedInCurrentState

Cause
SCM, RCM, and CR operate according to a state model.
The value written to the parameter COMMAND is a valid potential command. However, it is not permitted for
the current value of the 'STATE.'
This error occurs if there is a recent (unexpected) change of state which was not considered for the command. If
multiple attempts are made to store the same command parameter, it is possible that an earlier command caused
a state change. As a result, other commands may be rejected.

Solution
1. If issued by a user: Check the current value of state and only issue commands permissible in that state.
2. If issued by a program or application: The author / creator of the program or application must decide how to
handle this error. It may be an indication of a logical error. However, it indicates that the strategy or recipe
being commanded as a changed state and the command is issued late.

3.9.60 2460
An unprocessed pending command has been overwritten by a different command. The overwritten command
value does not have an effect and only the last command written before the next scheduled execution is
processed.

Error ID
CommandOverwritten

Error name
CommandOverwritten

Cause
At least two consecutive writes of different values to the same command parameter have been received without
the first command being processed. This error occurs only if the time span between the write operations is less
than the execution period of the control strategy or recipe being commanded.

302 www.honeywell.com
 3 ERROR CODES

Multiple writes of the same value never cause this warning.

This could be an indication of the following:
1. Execution period is too long.
2. Improper work organization or scope of responsibility assignments.
3. Application logic/timing error.

Solution
1. Decrease the period.
2. Avoid multiple operators operating on the same strategies or recipes at the same time.
3. Applications need to allow time for commands to be processed by the CEE before other commands are
being issued.

3.9.61 2461
This error indicates that some of the block names cannot be obtained from the remote cluster during run-time.

Error ID
ICP2PCannotNavigate

Error name
ICP2PCannotNavigate

Cause
Layered recipe is used in intercluster peer-to-peer communication. Parameter access failed due to one of the
following reasons.
1. Read the Owner-Name from a client when the child is instance based or child is class based and the
parameter is accessed from the child Master recipe.
2. Read the Queue-Name from a client (Control builder or chart view).
3. Read RPeerName from a client.

Solution
Perform the following workaround for the above cases.
1. Read the block information from OwnerLookUp in the format 'ClusterID,EEC,IOC.'
2. Read the block information from QueueLookUp in the format 'ClusterID,EEC,IOC.'
3. Read the block information from RPeerNameLookUp in the format 'ClusterID,EEC,IOC.'
4. Use the Inter Cluster Look up utility from Batch Preference block to get the block name.
5. This operation needs to be performed on the cluster in which the block is available.

3.9.62 2462
Invalid configuration is performed in SCM to support Acquire on Behalf option as Parent.

Error ID
AcqOnBehalfConfigErrorForSCM

Error name
AcqOnBehalfConfigErrorForSCM

303
3 ERROR CODES

Cause
Acquire on Behalf option of Parent is supported for SCMs only if the following configurations are performed:
1. Dynamic fetch is enabled in SCM.
2. Common device should be selected through Alias Table.

Solution
Reload SCM after performing the above mentioned configurations.

3.9.63 2463
Unit release is in progress.

Error ID
UnitBeingReleased

Error name
UnitBeingReleased

Cause
Since unit is being acquired by another recipe, unit release takes more than one cycle.

Solution
None

3.9.64 2464
Store to SIMCommand is rejected because the controller is configured with activities.

Error ID
CmdNotAllowedWithACT

Error name
CmdNotAllowedWithACT

Cause
Simulation environment has NUMACT configured as non-zero.

Solution
Reduce the NUMACT to zero and then perform a 'load values while active' operation to the CEE block.

3.9.65 2465
Indicates that changing the number of activities to non-zero has been rejected since the controller is in
SIMFREEZE state.

Error ID
NotAllowedWithSIMFREEZE

304 www.honeywell.com
 3 ERROR CODES

Error name
NotAllowedWithSIMFREEZE

Cause
A load of CEE or 'Load while active' of CEE has been issued to a simulation environment with SimState in
SIMFREEZE and the number of activities configured to non-zero.

Solution
Reduce the NUMACT to zero and then perform a 'load values while active' operation to the CEE block.

3.9.66 2466
Indicates that the parameter index for the specified parameter is not known by the execution environment.
Under ordinary circumstances this error should not be encountered.

Error ID
InvalidParameterIndexBlank

Error name
InvalidParamIndexEr

Cause
This parameter index is not known by the execution environment. Also, the parameter index received is out of
the range known by CEE.
Possible due to incompatible software versions.

Solution
Ensure compatible software versions.

3.9.67 2467
At the present time the controller cannot determine if the target unit is a valid type, so the operation is rejected.

Error ID
ErrorValidatingUnit

Error name
ErrorValidatingUnit

Cause
Peer resources are less. Ensure that the initiator statistics are within spec, and that you have not reached the limit
of peer controllers you can talk to simultaneously.

Solution
Free up peer resources and retry the operation.

305
3 ERROR CODES

3.9.68 2468
The current Unit acquisition is in progress. Store the blank unit from the Unit Selection tab found in the
properties of the activity detailed display chart view.

Error ID
StoreNullUnitFirst

Error name
StoreNullUnitFirst

Cause
The currently selected unit has been requested for acquisition and the process is in progress.
Hence, another unit cannot be stored at the current time.

Solution
Store a blank unit from the CR's Unit Selection tab which can be accessed from the properties of activity
detailed display chart view. After that, the actual intended Unit can be stored.

3.9.69 2600
This error is generated while loading the management FBs. Indicates that the DHN Box is bad and not
functioning based on the information received from DHM.

Error ID
CodeDHNError

Error name
DHNError

Cause
Actual DHN Box may be switched off or malfunctioning. Or the connection between PC and DHN box is gone
bad.

Solution
See the DHN Box and connection between PC and DHN.

3.9.70 2601
The connection resources needed to allocate this PDC connection are not available.

Error ID
CodePDCConnResourceUnavailable

Error name
PDCConnResourceUnavailable

306 www.honeywell.com
 3 ERROR CODES

Cause
All the connection resources are used by other connections and none are available for new resources.

Solution
Delete other PIOMB connections.

307
3 ERROR CODES

3.10 Codes 2651 to 2699

Related topics
“2657” on page 308

3.10.1 2657
Indicates that the box registration with Hiway Data Transport (HDT) has failed.

Error ID
CodeBoxRegistrationFail

Error name
BoxRegistrationFail

Cause
1. Box Number is invalid, or
2. Box has already been registered with the same box number, or
3. Memory pool full, or

Solution
• Change the box number if the box number is invalid and the box has already been registered with the same
box number.
• Contact Honeywell TAC for other issues.

308 www.honeywell.com
 3 ERROR CODES

3.11 Codes 2700 to 2799

Related topics
“2700” on page 311
“2701” on page 311
“2702” on page 311
“2707” on page 312
“2708” on page 312
“2709” on page 312
“2710” on page 313
“2711” on page 313
“2712” on page 313
“2713” on page 314
“2714” on page 314
“2715” on page 314
“2716” on page 315
“2717” on page 315
“2718” on page 315
“2719” on page 316
“2720” on page 316
“2721” on page 316
“2722” on page 317
“2723” on page 317
“2724” on page 317
“2725” on page 318
“2726” on page 318
“2727” on page 318
“2728” on page 319
“2729” on page 319
“2730” on page 319
“2731” on page 320
“2732” on page 320
“2733” on page 320
“2734” on page 321
“2735” on page 321
“2736” on page 321
“2737” on page 322
“2738” on page 322
“2739” on page 322
“2740” on page 323
“2741” on page 323
“2742” on page 323
“2743” on page 324
“2744” on page 324
“2745” on page 324
“2746” on page 325
“2747” on page 325

309
3 ERROR CODES

“2748” on page 325

“2749” on page 326
“2750” on page 326
“2751” on page 326
“2752” on page 327
“2753” on page 327
“2754” on page 327
“2755” on page 328
“2756” on page 328
“2757” on page 328
“2758” on page 329
“2759” on page 329
“2760” on page 329
“2761” on page 330
“2762” on page 330
“2763” on page 330
“2764” on page 331
“2765” on page 331
“2766” on page 332
“2767” on page 332
“2768” on page 332
“2770” on page 333
“2771” on page 333
“2772” on page 333
“2773” on page 334
“2774” on page 334
“2775” on page 334
“2776” on page 335
“2777” on page 335
“2778” on page 335
“2779” on page 336
“2780” on page 336
“2781” on page 336
“2782” on page 337
“2783” on page 337
“2784” on page 337
“2785” on page 338
“2786” on page 338
“2787” on page 338
“2788” on page 339
“2789” on page 339
“2790” on page 339
“2791” on page 340
“2792” on page 340
“2793” on page 340
“2794” on page 341
“2795” on page 341
“2796” on page 342

310 www.honeywell.com
 3 ERROR CODES

“2797” on page 342

“2798” on page 342
“2799” on page 343

3.11.1 2700
This error is generated while loading the management FBs. Indicates that the DHN Box is bad and not
functioning based on the information received from DHM.

Error ID
CodeDHNError

Error name
DHNError

Cause
Actual DHN Box may be switched off or malfunctioning. Or the connection between PC and DHN box is gone
bad.

Solution
See the DHN Box and connection between PC and DHN.

3.11.2 2701
Hardware error detected by loader diagnostics.

Error ID
CodeGeeStateMustBeIdle

Error name
GeeStateMustBeIdle

Cause
This failure error is generated when user tries to delete an independent FB, when GEE State is RUN.

Solution
Make GEE idle and proceed.

3.11.3 2702
Checkpoint Restore Operation is Not Allowed. DFB must be inactive.

Error ID
CodeCheckpointRestoreNotAllowed

Error name
CheckpointRestoreNotAllowed

311
3 ERROR CODES

Cause
Checkpoint Restore is not allowed if DFB is active.

Solution
None

3.11.4 2707
This failure error will be generated when a hiway box START command fails.

Error ID
CodeSTARTCmdFailed

Error name
STARTCmdFailed

Cause
None.

Solution
None.

3.11.5 2708
This failure error will be generated when a hiway box RESTART command fails.

Error ID
CodeRESTARTCmdFailed

Error name
RESTARTCmdFailed

Cause
None.

Solution
None.

3.11.6 2709
This error will be generated when user configures invalid card option

Error ID
CodeInvalidCardOption

Error name
InvalidCardOption

312 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.11.7 2710
This failure error will be generated when a hiway box ENABLEPROC command fails.

Error ID
CodeENABLEPROCCmdFailed

Error name
ENABLEPROCCmdFailed

Cause
None.

Solution
None.

3.11.8 2711
Could not enable Change Notification

Error ID
CodeENBLALMCHGNOTIFCmdFailed

Error name
ENBLALMCHGNOTIFCmdFailed

Cause
None.

Solution
None.

3.11.9 2712
Invalid Card Type

Error ID
CodeWrongCardType

Error name
WrongCardType

313
3 ERROR CODES

Cause
None.

Solution
None.

3.11.10 2713
Error due to the Extended box not being configured/present Box

Error ID
CodeExtendedDeviceFailureError

Error name
ExtendedDeviceFailureError

Cause
None.

Solution
None.

3.11.11 2714
Hiway read failed

Error ID
CodeHiwayReadFailed

Error name
HiwayReadFailed

Cause
None.

Solution
None.

3.11.12 2715
This failure error generated when user tries to delete DFB, when it is serving some CM.

Error ID
CodePointInService

Error name
PointInService

314 www.honeywell.com
 3 ERROR CODES

Cause
Having configured FFB with the same box no as DFB and trying to delete the DFB, with FFB still loaded.

Solution
Delete CM containing FFB first and then try to delete DFB

3.11.13 2716
Ack command failed

Error ID
CodeAckCmdFailed

Error name
AckCmdFailed

Cause
None.

Solution
None.

3.11.14 2717
KEYLOCK ERROR

Error ID
CodeKeyLockError

Error name
KeyLockError

Cause
None.

Solution
None.

3.11.15 2718
HaOperation intentionally aborted with out any error. Not displayed to the user

Error ID
CodeAbortWithoutErro

Error name
AbortWithoutError

315
3 ERROR CODES

Cause
Reason is Internal checks

Solution
None.

3.11.16 2719
This failure error generated when, the value entered is above or below the tolerance limit specified by the
configuration

Error ID
CodeToleranceLimitExceeded

Error name
ToleranceLimitExceeded

Cause
None.

Solution
None.

3.11.17 2720
This failure error generated when, the value entered is above or below the tolerance limit specified by the
system configuration

Error ID
CodePvEuLoHiLimitOrRangeExceeded

Error name
PvEuLoHiLimitOrRangeExceeded

Cause
None.

Solution
None.

3.11.18 2721
Some Hiway Resident parameter stores will be blocked, if the Device (box) is in RESET State.

Error ID
CodeDeviceReset

316 www.honeywell.com
 3 ERROR CODES

Error name
DeviceReset

Cause
None.

Solution
None.

3.11.19 2722
Hiway Resident parameter stores will be blocked, if the LoadScope is Gateway only.

Error ID
CodeLoadedWithGateWayOnlyLoadScope

Error name
DLoadedWithGateWayOnlyLoadScope

Cause
None.

Solution
None.

3.11.20 2723
Since DHN is Bad, DHM cannot issue HPr Trn Chns to DFBs and DFBs cannot communicate to boxes.

Error ID
CodeDHNDeviceFailureError

Error name
DHNDeviceFailureError

Cause
None.

Solution
None.

3.11.21 2724
When GEE is not in RUN, then no block will be created or loaded.

Error ID
CodeGeeStateMustBeRun

317
3 ERROR CODES

Error name
GeeStateMustBeRun

Cause
None.

Solution
None.

3.11.22 2725
Unless RemoteCas Enable flag is set, mode cannot be changed to CAS

Error ID
CodeSetRemoteCascade

Error name
SetRemoteCascade

Cause
None.

Solution
None.

3.11.23 2726
This is a common error code for all failures, which can happen due to unreasonable reasons

Error ID
CodeOperationFailed

Error name
OperationFailed

Cause
None.

Solution
None.

3.11.24 2727
In the case of Basic Controller, the slot config load is allowed only if the box state is reset.

Error ID
CodeBoxstatIsReset

318 www.honeywell.com
 3 ERROR CODES

Error name
BoxstatIsReset

Cause
None.

Solution
None.

3.11.25 2728
Issued when an FB for a slot/Sublsot is config-loaded on a box that does not support the FB type in concern.

Error ID
CodeBoxTypeMismatch

Error name
BoxTypeMismatch

Cause
None.

Solution
None.

3.11.26 2729
Issued when an FB for a slot/Sublsot is config-loaded on a box that does not support the slot type in concern.

Error ID
CodeSlotTypeNotSupported

Error name
SlotTypeNotSupported

Cause
None.

Solution
None.

3.11.27 2730
Slot number is out of range

Error ID
CodeSlotNumberOutOfRange

319
3 ERROR CODES

Error name
SlotNumberOutOfRange

Cause
None.

Solution
None.

3.11.28 2731
These are special sub slots reserved for future use and hence cannot load FBs

Error ID
CodeReservedSubslotNumber

Error name
ReservedSubslotNumber

Cause
None.

Solution
None.

3.11.29 2732
The slot (card) in the box failed and hence the config load failed.

Error ID
CodeSlotFailed

Error name
SlotFailed

Cause
None.

Solution
None.

3.11.30 2733
Slot type used does not match

Error ID
CodeSlotTypeMismatch

320 www.honeywell.com
 3 ERROR CODES

Error name
SlotTypeMismatch

Cause
None.

Solution
None.

3.11.31 2734
Sub slot number used is outside the range that is supported by the box.

Error ID
CodeSubslotNumberOutOfRange

Error name
SubslotNumberOutOfRange

Cause
None.

Solution
None.

3.11.32 2735
DFB is not configured with the slot type, used for configuring the subslot FB.

Error ID
CodeNoSlotConfigured

Error name
NoSlotConfigured

Cause
None.

Solution
None.

3.11.33 2736
When the box is in Fail comm, then slot/subslot FB config load is blocked.

Error ID
CodeBoxstatIsFailcom

321
3 ERROR CODES

Error name
BoxstatIsFailcom

Cause
None.

Solution
None.

3.11.34 2737
When the box is in Failhdw, then slot/subslot FB config load is blocked.

Error ID
CodeBoxstatIsFailhdw

Error name
BoxstatIsFailhd

Cause
None.

Solution
None.

3.11.35 2738
When the box DFB is Inactive, then slot/subslot FB config load is blocked.

Error ID
CodeBoxstatIsUncertain

Error name
BoxstatIsUncertain

Cause
None.

Solution
None.

3.11.36 2739
When the DFBs are Active, then CHG FB reload or delete will be blocked

Error ID
CodeAllDFBsMustBeInactive

322 www.honeywell.com
 3 ERROR CODES

Error name
AllDFBsMustBeInactive

Cause
None.

Solution
None.

3.11.37 2740
Unless remote cascade is reset, FB cannot be made inactivated or deleted.

Error ID
CodeResetRemoteCascade

Error name
ResetRemoteCascade

Cause
None.

Solution
None.

3.11.38 2741
Alarm configuration mismatch

Error ID
CodeAlarmConfigMismatch

Error name
AlarmConfigMismatch

Cause
None.

Solution
None.

3.11.39 2742
When CHG is not the Master, process alarms are not sent and hence parameters like MODE, DIGALARM
should be allowed to undergo change.

Error ID
CodeCHGNotMaster

323
3 ERROR CODES

Error name
CHGNotMaster

Cause
None.

Solution
None.

3.11.40 2743
Hiway address exceeded range or limit and load cannot succeed

Error ID
CodeHiwayDeviceAddressExceededRange

Error name
HiwayDeviceAddressExceededRange

Cause
None.

Solution
None.

3.11.41 2744
Used in the case of dual input or dual output subslot FBs

Error ID
CodeNoOfInputsOrOutputsExceededLimit

Error name
NoOfInputsOrOutputsExceededLimit

Cause
None.

Solution
None.

3.11.42 2745
When the device is in Idle state, parameter (Hiway resident) access will have restrictions. For example, counter
state cannot be changed, when device is in Idle

Error ID
CodeDeviceInIdleState

324 www.honeywell.com
 3 ERROR CODES

Error name
DeviceInIdleState

Cause
None.

Solution
None.

3.11.43 2746
When the user tries to change AVFORMAT & AVCONV, if the counter is in RUN state.

Error ID
CodeSlotTypeMismatch

Error name
InvalidCounterState

Cause
None.

Solution
None.

3.11.44 2747
Mode cannot be changed, when Mode permit is not Permit.

Error ID
CodeModePermitError

Error name
ModePermitError

Cause
None.

Solution
None.

3.11.45 2748
Keylock needs to be changed to Engineer.

Error ID
CodeKeylockMustBeEnabled

325
3 ERROR CODES

Error name
KeylockMustBeEnabled

Cause
None.

Solution
None.

3.11.46 2749
PRESET LOCK Error

Error ID
CodePRESLockError

Error name
PRESLockError

Cause
None.

Solution
None.

3.11.47 2750
CMDDIS DIGALFMT cannot be selected when PVSRC is MAN

Error ID
CodeCmddisNotSupported

Error name
CmddisNotSupported

Cause
None.

Solution
None.

3.11.48 2751
Cannot make PVSRC as MAN, when CMDDIS DIGALFMT is selected.

Error ID
CodeInCorrectPVSRC

326 www.honeywell.com
 3 ERROR CODES

Error name
InCorrectPVSRC

Cause
None.

Solution
None.

3.11.49 2752
Load of AMC counter fails when PRESET / PVDEVTP limit exceeds the range.

Error ID
CodeLimitOrRangeError

Error name
LimitOrRangeError

Cause
None.

Solution
None.

3.11.50 2753
SP change prohibited when PV Tracking is configured

Error ID
CodePVTrackProhibitsChange

Error name
PVTrackProhibitsChange

Cause
None.

Solution
None.

3.11.51 2754
SP change prohibited when configured for cascade

Error ID
CodeSPConfigProhibitsChange

327
3 ERROR CODES

Error name
SPConfigProhibitsChange

Cause
None.

Solution
None.

3.11.52 2755
Since the device is not in RESET state, the config load of CMs are blocked.

Error ID
CodeDeviceNotInResetState

Error name
DeviceNotInResetState

Cause
None.

Solution
None.

3.11.53 2756
If FBTime value has exceeded the limit, then Digital Input FB load will fail.

Error ID
CodeFBTimeLimitExceeded

Error name
FBTimeLimitExceeded

Cause
None.

Solution
None.

3.11.54 2757
DHP subslot config parameters range or limit exceeded.

Error ID
CodeDHPSlotParamRangeError

328 www.honeywell.com
 3 ERROR CODES

Error name
DHPSlotParamRangeError

Cause
None.

Solution
None.

3.11.55 2758
The PLC configured in the DHP is different from that used in the point (CM.FFB).

Error ID
CodeDHPConfigurationMismatchError

Error name
DHPConfigurationMismatchError

Cause
None.

Solution
None.

3.11.56 2759
This failure error generated when, the DFB registration in BM FB Address Map fails due to some reason.

Error ID
CodeWrongOrExistingBoxNum

Error name
WrongOrExistingBoxNum

Cause
Reason could be duplicate registration, wrong box range, memory allocation failed and so on.

Solution
None.

3.11.57 2760
This failure error generated when, the Slot or FFB registration in BM FB Address Map fails due to some reason.

Error ID
CodeWrongOrExistingSlotNum

329
3 ERROR CODES

Error name
WrongOrExistingSlotNum

Cause
Reason could be duplicate registration, wrong Slot range, memory allocation failed and so on.

Solution
None.

3.11.58 2761
This failure error generated when, the SubSlot or FFB registration in BM FB Address Map fails due to some
reason.

Error ID
CodeWrongOrExistingSubSlotNum

Error name
WrongOrExistingSubSlotNum

Cause
Reason could be duplicate registration, wrong SubSlot range, memory allocation failed and so on.

Solution
None.

3.11.59 2762
This warning is generated when, the MinPub period exceeds the specified value.

Error ID
CodeMinPubPeriodRangeExceeded

Error name
MinPubPeriodRangeExceeded

Cause
Reason could be due to wrong entry of MinPub Period.

Solution
None.

3.11.60 2763
This failure error generated when, the SubSlot or FFB registration in BM FB Address Map fails due to some
reason.

330 www.honeywell.com
 3 ERROR CODES

Error ID
CodeExistingInputSubSlotNum1

Error name
ExistingInputSubSlotNum1

Cause
Reason could be duplicate registration, wrong SubSlot range, memory allocation failed and so on.

Solution
None.

3.11.61 2764
This failure error generated when, the SubSlot or FFB registration in BM FB Address Map fails due to some
reason.

Error ID
CodeExistingInputSubSlotNum2

Error name
ExistingInputSubSlotNum2

Cause
Reason could be duplicate registration, wrong SubSlot range, memory allocation failed and so on.

Solution
None.

3.11.62 2765
This failure error generated when, the SubSlot or FFB registration in BM FB Address Map fails due to some
reason.

Error ID
CodeExistingOutputSubSlotNum1

Error name
ExistingOutputSubSlotNum1

Cause
Reason could be duplicate registration, wrong SubSlot range, memory allocation failed and so on.

Solution
None.

331
3 ERROR CODES

3.11.63 2766
This failure error generated when, the SubSlot or FFB registration in BM FB Address Map fails due to some
reason.

Error ID
CodeExistingOutputSubSlotNum2

Error name
ExistingOutputSubSlotNum2

Cause
Reason could be duplicate registration, wrong SubSlot range, memory allocation failed and so on.

Solution
None.

3.11.64 2767
This failure error is generated when, the correct NumSrcConn parameter value is not sent to the CEE.

Error ID
CodeIncorrectNumSrcConnValue

Error name
IncorrectNumSrcConnValue

Cause
Reason could be improper calculation of NumSrcConn value by the parser, wrong NumSrcConn value from CB,
corrupt database.

Solution
None.

3.11.65 2768
This failure error generated when an invalid request is encountered during checkpoint save or restore

Error ID
CodeCheckPointOperInProg

Error name
CheckPointOperInProg

Cause
Example will be a Swap commanded during checkpoint save.

332 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.11.66 2770
This failure error generated when an invalid request is encountered during Initial Sync Phase of EHG
Redundancy.

Error ID
CodeInitSyncInProgress

Error name
InitSyncInProgress

Cause
Example will be a Swap commanded during Initial Sync.

Solution
None.

3.11.67 2771
This failure error generated when an invalid request is encountered during Switchover Phase of EHG
Redundancy.

Error ID
CodeSwitchoverInProgress

Error name
Short Name: SwitchoverInProgress

Cause
RM Commanded

Solution
None.

3.11.68 2772
This failure error generated when EHG receives an invalid request during Swap operation.

Error ID
CodeSwapInProgress

Error name
SwapInProgress

333
3 ERROR CODES

Cause
User commanded action

Solution
None.

3.11.69 2773
This failure error generated when EHG receives an invalid request for Swap operation.

Error ID
CodeSecEHGNotInSync

Error name
SecEHGNotInSync

Cause
None.

Solution
None.

3.11.70 2774
This failure error generated when EHG receives an invalid request while secondary is not available.

Error ID
CodeSecEHGNotAvail

Error name
SecEHGNotAvail

Cause
None.

Solution
None.

3.11.71 2775
This failure error generated when EHG receives an invalid request while secondary is not loaded.

Error ID
CodeSecEHGHasNoDB

Error name
SecEHGHasNoDB

334 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.11.72 2776
This failure error generated when EHG receives an invalid request while configured non-redundant.

Error ID
CodeEHGNonRedun

Error name
EHGNonRedun

Cause
None.

Solution
None.

3.11.73 2777
This failure error generated when EHG receives an invalid request while EHGs are in Sync.

Error ID
CodeSecEHGAlreadyInSync

Error name
SecEHGAlreadyInSync

Cause
None.

Solution
None.

3.11.74 2778
Invalid Syncronization type

Error ID
CodeInvalidSyncType

Error name
InvalidSyncType

335
3 ERROR CODES

Cause
None.

Solution
None.

3.11.75 2779
Invalid PCM State

Error ID
CodeInvalidPCMState

Error name
InvalidPCMState

Cause
None.

Solution
None.

3.11.76 2780
Version mismatch in GEE and DHM/DHN DLL

Error ID
CodeGEEDllsVersionMismatch

Error name
GEEDllsVersionMismatch

Cause
None.

Solution
None.

3.11.77 2781
This Failure error generated when INPT/OUTPT Subslotnum1== INPT/OUTPT Subslotnum2 in the case of
DDI & DD.

Error ID
CodeDuplicateSubslotNumber

Error name
DuplicateSubslotNumber

336 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.11.78 2782
This Failure error generated when User keeps trying repeated disabling of sync even though its disabled.

Error ID
CodeSyncAlreadyDisabled

Error name
SyncAlreadyDisabled

Cause
None.

Solution
None.

3.11.79 2783
This Failure error generated when User keeps trying repeated enabling of sync even though its enabled.

Error ID
CodeSyncAlreadyEnabled

Error name
SyncAlreadyEnabled

Cause
None.

Solution
None.

3.11.80 2784
This Failure error generated when User keeps trying tp swap when the Secondary is not read.

Error ID
CodeSecNotQualifiedForSwap

Error name
SecNotQualifiedForSwap

337
3 ERROR CODES

Cause
None.

Solution
None.

3.11.81 2785
Data size available in the Data Container must be greater than the data Size requested by the basic block.

Error ID
CodeDCDataSizeErr

Error name
DCDataSize

Cause
None.

Solution
None.

3.11.82 2786
This Failure error generated when SIM-EHG is unable to start DHSIM process.

Error ID
CodeCouldnotStartDHSIM

Error name
CouldnotStartDHSIM

Cause
None.

Solution
None.

3.11.83 2787
This Failure error is generated when User tries to load the OUT block with RemCasType as NONE.

Error ID
CodeParameterCannotBeNone

Error name
ParameterCannotBeNone

338 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.11.84 2788
This Failure error is generated when User tries to reload the SIM-ACE/ACE, changing the SIMENABLE value.

Error ID
CodeInvalidSimEnableChange

Error name
InvalidSimEnableChange

Cause
None.

Solution
None.

3.11.85 2789
This Failure error is generated when User given DHN Box num on EHGFB not match with DHN BOXNUM
from DataHiway.

Error ID
CodeDHNBoxNumMismatc

Error name
DHNBoxNumMismatch

Cause
None.

Solution
None.

3.11.86 2790
This error is generated when the PCodeSize of the expression is greater than 200 byte.

Error ID
CodeExpressiontooLarge

Error name
ExpressiontooLarge

339
3 ERROR CODES

Cause
1. This is due to the restriction in the PCodeSize of each expression.
2. If this is reported for parameter NUMOUTPUTS at step block or NUMCONDS at transition, then the
combination of all expressions is too large without any one expression being too large.

Solution
1. Reduce the expression size.
2. Reduce the expression size or split the block into multiple blocks with equivalent functionality.

3.11.87 2791
This Failure error is generated when User attempts a write to an alarm flag that SIM-EHG does not open for
write access

Error ID
CodeAlarmNotWriteable

Error name
AlarmNotWriteable

Cause
None.

Solution
None.

3.11.88 2792
This Failure error is generated when User attempts a write to a PV in a PIU AI in SIM-EHG and scan frequency
for that AI has been set as Offscan.

Error ID
CodePointOffScan

Error name
PointOffScan

Cause
None.

Solution
None.

3.11.89 2793
This warning is NOT user visible.

340 www.honeywell.com
 3 ERROR CODES

Error ID
CodeAliasTableConnectionReferenceWarning

Error name
AliasTableConnectionReferenceWarning

Cause
If the Step output has an alias cell as destination and the step expression is computed to NOP (using conditional
expression), the output completes normally without performing a write and the output store status
(OP[x].STORESTS) displays the error code 2793.

Solution
None required. However, if the situation does not match the described cause and if the step execution status
(EXECSTS) is Error or Fail, a different problem may exist and must be reported to TAC.

3.11.90 2794
This Failure error is generated when pre-fetch request cannot be allocated.

Error ID
CodeErrorAddingAcyclicRequestInCEE

Error name
ErrorAddingAcyclicRequestInCEE

Cause
None.

Solution
None.

3.11.91 2795
This Failure error is generated when User attempts a write to a PV in a PIU AI in SIM-EHG and scan frequency
for that AI has been set as Offscan.

Error ID
CodeDataNotEnabledError

Error name
DataNotEnabledError

Cause
None.

Solution
None.

341
3 ERROR CODES

3.11.92 2796
CEECOMMAND to RUN cannot be given when the MDM service is running on the On-Process ACE node.

Error ID
CodeMDMServiceStarted

Error name
MDMServiceStarted

Cause
User tries to activate On-Process ace's CEEACE FB when MDM service is running.

Solution
Stop MDM service and activate the CEEACE FB.

3.11.93 2797
This Failure error is generated when User tries to change SP/OP in the direction of Windup.

Error ID
CodeSpOpChangeNotAllowed

Error name
SpOpChangeNotAllowed

Cause
None.

Solution
None.

3.11.94 2798
This failure is generated when the user tries to set the RT or Bias values in invalid RBOPTION.

Error ID
CodeInvalidRBOption

Error name
InvalidRBOption

Cause
None.

Solution
None.

342 www.honeywell.com
 3 ERROR CODES

3.11.95 2799
This failure is generated when the user tries to Enable PV Tracking Option for RatioCtl.

Error ID
CodePvTrackingNotApplicable

Error name
PvTrackingNotApplicable

Cause
None.

Solution
None.

343
3 ERROR CODES

3.12 Codes 2800 to 2820

Related topics
“2800” on page 344
“2801” on page 344
“2802” on page 345
“2803” on page 345
“2804” on page 345
“2805” on page 346
“2806” on page 346
“2807” on page 346
“2808” on page 347
“2809” on page 347
“2810” on page 348
“2811” on page 348
“2812” on page 348
“2813” on page 349
“2814” on page 349
“2815” on page 349
“2817” on page 350
“2818” on page 350
“2819” on page 350

3.12.1 2800
Indicates that the engineering unit high or low limit is NaN in a RatioCtl block in the given Control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeRatioCtlSpEuLoOrHiIsNaN

Error name
RatioCtl:EU Lmt

Cause
This is the correct behavior of the block.

Solution
Check high and low limits and adjust as necessary.

3.12.2 2801
Indicates that the CAB instance is missing in the CM

Error ID
CodeCABNameError

344 www.honeywell.com
 3 ERROR CODES

Error name
CabNameError

Cause
CAB instance is not configured or not loaded.

Solution
Configure CAB instance before configuring insertions.

3.12.3 2802
This failure is generated when serial link cable is disconnected from primary LIOM/SIOM.

Error ID
CodeLIOMSerailLinkCeased

Error name
LIOMSerailLinkCeased

Cause
None.

Solution
None.

3.12.4 2803
This failure is generated when serial link cable is disconnected from primary LIOM/SIOM.

Error ID
CodeLIOMConfigLockDuringInitSync

Error name
LIOMConfigLockDuringInitSync

Cause
None.

Solution
None.

3.12.5 2804
This failure is generated when an invalid retentive index is used in a retentive timer/counter

Error ID
CodeLIOMInvalidRetIndex

345
3 ERROR CODES

Error name
LIOMInvalidRetIndex

Cause
Invalid Retentive Index

Solution
None.

3.12.6 2805
This failure is generated when 'Read Configuration' button is pressed when the IOM is Active.

Error ID
CodeIOMMustBeInactive

Error name
IOMMustBeInactive

Cause
IOM Must Be Inactive

Solution
None.

3.12.7 2806
This failure is generated when 'Read Configuration' button is pressed while Send Configuration is in Progress.

Error ID
CodeConfigurationLoadIsInProgress

Error name
ConfigurationLoadIsInProgress

Cause
Read configuration is not permitted when send configuration is in progress

Solution
User should wait till the completion send configuration and then attempt a Read configuration.

3.12.8 2807
This failure is generated when the number of inputs connected is less than two.

Error ID
CodeIncrSumNumOfConnectedInputsLessThan2

346 www.honeywell.com
 3 ERROR CODES

Error name
IncrSumNumOfConnectedInputsLessThan2

Cause
The IncrSummer block is loaded with less than two connected primaries. The block is prevented from activation
in such a case.

Solution
Make at least two primary connections before loading and activating.

3.12.9 2808
This failure is generated when the configured XEuHi or XEuLo is a NaN value. The block is prevented from
going active in such a case.

Error ID
CodeIncrSummerXEuLoOrHiIsNaN

Error name
IncrSummerXEuLoOrHiIsNaN

Cause
Indicates that less than two P-inputs are connected in a SIGNALSEL block in the given Control Module
Operations such as CM activation are blocked in this condition.

Solution
None.

3.12.10 2809
TIndicates that less than two P-inputs are connected in a SIGNALSEL block in the given Control Module
Operations such as CM activation are blocked in this condition.

Error ID
CodeNumOfConnectedInputsLessThan2

Error name
NumOfConnectedInputsLessThan2

Cause
This is the correct behavior of the block.

Solution
Ensure that block is configured with atleast two valid inputs.

347
3 ERROR CODES

3.12.11 2810
Indicates that the configured total number of ignorable inputs exceeds number of connected inputs in a
SIGNALSEL block in the given Control Module Operations such as CM activation are blocked in this
condition.

Error ID
CodeSumOfIgnorHiAndIgnorLoNotLessThanNumPInpt

Error name
SumOfIgnorHiAndIgnorLoNotLessThanNumPInpt

Cause
This is the correct behavior of the block.

Solution
Ensure that block is configured with IGNORHI+IGNORLO being less than number of connected inputs.

3.12.12 2811
This failure is generated when value of BF or KFf is changed online and the value of Ff is Nan

Error ID
CodeFfIsNaNFbMustBeInactiveOrIdle

Error name
FfIsNaNFbMustBeInactiveOrIdle

Cause
Store to BF or KFf in Pidff block when the CM is active & CEE is not Idle and Ff is Nan.

Solution
Inactivate the CM or change the state of CEE to Idle or Ff should have a non-Nan value.

3.12.13 2812
This failure is generated when the value being stored to OP or SP exceeds the limits.

Error ID
CodeLimitExceededNeedsClamping

Error name
LimitExceededNeedsClamping

Cause
Store to SP or OP has exceeded the limits.

348 www.honeywell.com
 3 ERROR CODES

Solution
Change the value being stored to be within limits.

3.12.14 2813
This error message is generated while enabling both redtag and Saferedtag flags when OP is not safe.

Error ID
CodeOPNotSafe

Error name
OPNotSafe

Cause
This is the correct behavior of the block.

Solution
Ensure that OP is safe.

3.12.15 2814
The index associated with the entered primary data exceeds the number of primaries the function block
supports.

Error ID
CodeInvalidPrimdataIndex

Error name
InvalidPrimdataIndex

Cause
This is the correct behavior of the block.

Solution
Ensure the PRIMDATA index value is less than or equal to the number of primaries that the function block
supports.

3.12.16 2815
This error message is generated on load of DevCtl FB with Seal Option enabled and command disagree alarm
not configured properly.

Error ID
CodeCmdDisAlmMustBeConfigured

Error name
CmdDisAlmMustBeConfigured

349
3 ERROR CODES

Cause
Command Disagree alarm time CMDDISALM.TM[x] is set to 0.

Solution
Ensure that CMDDISALM.TM[x] is configured with non-zero values.

3.12.17 2817
This error indicates that the write or read operation on the CONST[1..8] parameter is permitted only if the
CONSTENABLE parameter is enabled.

Error ID
CodeCalcConstNotEnabled '%s: Constant not enabled'

Error name
CalcConstNotEnabled '%s: Constant not enabled'

Cause
CONSTENABLE parameter is not enabled.

Solution
Enable the CONSTENABLE parameter to use the CONST[1..8] parameter.

3.12.18 2818
Indicates that there is an attempt to write/read into the parameters BADOCOPT/UNCMDCHGALM.XX
without BADOCOPTENB enabled.

Error ID
CodeBadOCOptEnbNotEnabled

Error name
BadOCOptEnbNotEnabled

Cause
Request for Write/read into the parameters BADOCOPT/UNCMDCHGALM.XX with BADOCOPTENB
disabled.

Solution
Enable the BADOCOPTENB parameter to be able to access BADOCOPT and UNCMDCHGALM.XX
parameters.

3.12.19 2819
Warning message that indicates that you have configured user-defined initial values for the AO/DO channels.

Error ID
EPKS_E_WARNING

350 www.honeywell.com
 3 ERROR CODES

Error name
E_WARNING

Cause
You have configured the user-defined initial values for the AO/DO channels because of which the channel value
may change surprisingly.
This feature is rarely used in Profibus devices and may assume specific configuration setting in the slave
configuration.

Solution
Ensure that the value entered results in minimum negative impact on the process.

351
3 ERROR CODES

3.13 Codes 2900 to 2997

Related topics
“2900” on page 353
“2901” on page 353
“2902” on page 353
“2903” on page 354
“2904” on page 354
“2905” on page 354
“2951” on page 355
“2952” on page 355
“2953” on page 355
“2954” on page 356
“2955” on page 356
“2956” on page 356
“2957” on page 357
“2958” on page 357
“2959” on page 357
“2960” on page 358
“2961” on page 358
“2962” on page 358
“2963” on page 359
“2964” on page 359
“2965” on page 359
“2966” on page 360
“2967” on page 360
“2968” on page 360
“2969” on page 361
“2970” on page 361
“2971” on page 361
“2972” on page 362
“2973” on page 362
“2974” on page 362
“2975” on page 363
“2976” on page 363
“2977” on page 363
“2978” on page 364
“2979” on page 364
“2980” on page 364
“2981” on page 365
“2982” on page 365
“2983” on page 366
“2984” on page 366
“2985” on page 366
“2986” on page 367
“2987” on page 367
“2988” on page 367

352 www.honeywell.com
 3 ERROR CODES

“2989” on page 368

“2990” on page 368
“2991” on page 369
“2992” on page 369
“2993” on page 370
“2994” on page 370
“2995” on page 371
“2996” on page 371
“2997” on page 371

3.13.1 2900
This failure is generated when the OPC Gateway cannot convert a handle to a name.

Error ID
CodeOPCNoSRResolution

Error name
CodeOPCNoSRResolution

Cause
None.

Solution
None.

3.13.2 2901
This failure is generated when the OPC Gateway is not connected to the OPC server and cannot process
requests.

Error ID
CodeOPCNotConnected

Error name
OPCNotConnected

Cause
OPC Gateway is in IDLE or OPC Error state.

Solution
None.

3.13.3 2902
This failure is generated when the OPC Gateway is unable to add the requested item to the OPC server
monitoring group.

353
3 ERROR CODES

Error ID
CodeOPCAddItemFailed

Error name
OPCAddItemFailed

Cause
Invalid point name.

Solution
None.

3.13.4 2903
This failure is generated when the OPC Gateway is unable to complete a store operation to an OPC item.

Error ID
CodeOPCStoreFailed

Error name
OPCStoreFailed

Cause
Invalid point server handle

Solution
None.

3.13.5 2904
This failure is generated when the OPC Gateway receives a bad quality for the OPC item.

Error ID
CodeOPCQualityBad

Error name
OPCQualityBad

Cause
None.

Solution
None.

3.13.6 2905
This failure is generated when the OPC Gateway cannot convert a data container to the desired Variant type for
a store.

354 www.honeywell.com
 3 ERROR CODES

Error ID
CodeOPCDataConversionFailed

Error name
OPCDataConversionFailed

Cause
Invalid conversion requested by user

Solution
None.

3.13.7 2951
This failure is generated when Configured Firmware Revision does not match actual Firmware Revision.

Error ID
CodeMCRevMismatchWarning

Error name
MCRevMismatchWarning

Cause
None.

Solution
None.

3.13.8 2952
This failure is generated when PERIOD of CM configured for PREFETCH is changed to a value that cannot
support PREFETCH.

Error ID
CodeInvalidPeriodForPeerReadOption

Error name
InvalidPeriodForPeerReadOption

Cause
Unsupported PREFETCH value

Solution
None.

3.13.9 2953
Indicates that an outstanding store request is pending at the current time.

355
3 ERROR CODES

Error ID
CodePreviousCommandPending

Error name
PreviousCommandPending

Cause
A request to store to the command parameter has not completed when a second command is received.

Solution
Wait for request to complete and try again.

3.13.10 2954
An attempt was made to store to a command parameter, but option to command isn't enabled

Error ID
CodeInvalidCommandOption

Error name
InvalidCommandOption

Cause
None.

Solution
Change configuration option to enable command

3.13.11 2955
PROJOWNRPARAMOPT is disabled

Error ID
InvalidNoPrjParamOpt

Error name
InvalidNoPrjParamOpt

Cause
PROJOWNRPARAMOPT is disabled

Solution
Change PROJOWNRPARAMOPT to TRUE

3.13.12 2956
Cannot command owner as there are no current owners.

356 www.honeywell.com
 3 ERROR CODES

Error ID
CmdInvalidNoOwner

Error name
InvalidNoOwner

Cause
No RCM currently owns the UCM.

Solution
No action required.

3.13.13 2957
Cannot read value from owner. Failed to get connection.

Error ID
InvalidNoConnectionToOwner

Error name
InvalidNoConnectionToOwner

Cause
Probably ran out of peer to peer resources.

Solution
Reduce number of connections on node.

3.13.14 2958
The PushSp cannot be TRUE when node type is other than ACE.

Error ID
CodeInvalidNodeTypeForPushSpOn

Error name
InvalidNodeTypeForPushSpOn

Cause
None.

Solution
Set PushSP as FALSE and reload.

3.13.15 2959
The PushSp cannot be TRUE when SP connection exists or SP connection cannot be made when the PushSP is
TRUE.

357
3 ERROR CODES

Error ID
CodeSpConnAndPushSpOnAreMutuallyexclusive

Error name
SpConnAndPushSpOnAreMutuallyexclusive

Cause
None.

Solution
Set either PushSP as FALSE or delete the SP connection.

3.13.16 2960
All Batch Events have not been added to the Journal.

Error ID
CodeAlleventsNotJourneld

Error name
AlleventsNotJourneld

Cause
None.

Solution
Set the FORCETOINACTIVE Parameter to TRUE.

3.13.17 2961
Invalid IO Map instance.

Error ID
CodeInvalidMapInstance

Error name
InvalidMapInstance

Cause
Invalid IO Map instance

Solution
None

3.13.18 2962
Invalid assembly instance.

358 www.honeywell.com
 3 ERROR CODES

Error ID
CodeInvalidAssemblyInstance

Error name
InvalidAssemblyInstance

Cause
Invalid assembly instance.

Solution
None

3.13.19 2963
Insufficient IO Map memory.

Error ID
CodeInsufficientMapMemory

Error name
InsufficientMapMemory

Cause
Insufficient IO Map memory.

Solution
None

3.13.20 2964
Insufficient shared RAM.

Error ID
CodeInsufficientSharedRam

Error name
InsufficientSharedRam

Cause
Insufficient shared RAM.

Solution
None

3.13.21 2965
Invalid IOM configuration.

359
3 ERROR CODES

Error ID
CodeInvalidConfig

Error name
InvalidConfig

Cause
Invalid IOM configuration.

Solution
None

3.13.22 2966
Failure in ICP driver.

Error ID
CodeIcpDriverFail

Error name
IcpDriverFail

Cause
Failure in ICP driver.

Solution
None

3.13.23 2967
Exceeded max buffer size limit.

Error ID
CodeBuffSizeBad

Error name
BuffSizeBad

Cause
Exceeded max buffer size limit.

Solution
None

3.13.24 2968
Invalid connection type

360 www.honeywell.com
 3 ERROR CODES

Error ID
CodeBadConnType

Error name
BadConnType

Cause
Invalid connection type

Solution
None

3.13.25 2969
Cannot delete IO module: Connection busy.

Error ID
CodeDeleteConnBusy

Error name
DeleteConnBusy

Cause
Cannot delete IO module: Connection busy.

Solution
None.

3.13.26 2970
Prior reconfiguration is pending.

Error ID
CodePriorReconfigurationPending

Error name
PriorReconfigurationPending

Cause
Prior reconfiguration is pending.

Solution
None

3.13.27 2971
Failure in ASA IOM reconfiguration.

361
3 ERROR CODES

Error ID
CodeAsaReconfigurationFail

Error name
AsaReconfigurationFail

Cause
Failure in ASA IOM reconfiguration.

Solution
None

3.13.28 2972
Invalid update rate.

Error ID
CodeInvalidUpdateRate

Error name
InvalidUpdateRate

Cause
Invalid update rate.

Solution
None

3.13.29 2973
Invalid connection mode

Error ID
CodeConnModeBad

Error name
ConnModeBad

Cause
Invalid connection mode

Solution
None

3.13.30 2974
Invalid connection role.

362 www.honeywell.com
 3 ERROR CODES

Error ID
CodeConnRoleBad

Error name
ConnRoleBad

Cause
Invalid connection role.

Solution
None

3.13.31 2975
Invalid connection trigger.

Error ID
CodeConnTriggerBad

Error name
ConnTriggerBad

Cause
Invalid connection trigger.

Solution
None

3.13.32 2976
Invalid connection transport mode

Error ID
CodeConnTransportBad

Error name
ConnTransportBad

Cause
Invalid connection transport mode

Solution
None

3.13.33 2977
Invalid connection priority.

363
3 ERROR CODES

Error ID
CodeConnPriorityBad

Error name
ConnPriorityBad

Cause
Invalid connection priority.

Solution
None

3.13.34 2978
Invalid buffer type.

Error ID
CodeBuffTypeBad

Error name
BuffTypeBad

Cause
Invalid buffer type.

Solution
None

3.13.35 2979
RCM is in Running State

Error ID
CodeRCMInTransientState

Error name
RCMInTransientState

Cause
RCM is in Running State

Solution
Wait for RCM to enter into Final State.

3.13.36 2980
Profile REset input of Rampsoak is ON.

364 www.honeywell.com
 3 ERROR CODES

Error ID
CodeProfileResetOn

Error name
ProfileResetOn

Cause
Profile REset input of Rampsoak is ON.

Solution
Set PROFRESET to OFF.

3.13.37 2981
Indicates that the SCM/RCM/ACT re-execution is not flexible. Attempted change is not supported.

Error ID
CodeInvalidForFlexibleRCMSCMExecution

Error name
InvalidForFlexibleRCMSCMExecution

Cause
SCM/RCM/MR is configured for 'always execute', but SCM/RCM/MR component is configured for flexible
execution.

Solution
Either change re-execution option of SCM/RCM/MR and reload the SCM/RCM/MR or change re-execution
option of Step or its overrides to container configuration.

3.13.38 2982
Indicates that no input is connected in REGSUMMER block in the given Control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeRegSummerNumOfConnectedInputsLessThan1

Error name
RegSummerNumOfConnectedInputsLessThan1

Cause
This is the intended behavior of the block.

Solution
Ensure that at least one input is connected.

365
3 ERROR CODES

3.13.39 2983
Indicates that no input is connected in AUXSUMMER block in the given Control Module.
Operations such as CM activation are blocked in this condition.

Error ID
CodeAuxSummerNumOfConnectedInputsLessThan1

Error name
AuxSummerNumOfConnectedInputsLessThan1

Cause
This is the intended behavior of the block.

Solution
Ensure that atleast one input is connected.

3.13.40 2984
Indicates that the X engineering unit high or low limit is NaN in REGSUMMER block in the given Control
Module. Operations such as CM activation are blocked in this condition.

Error ID
CodeRegSummerXEuLoOrHiIsNaN

Error name
RegSummerXEuLoOrHiIsNaN

Cause
This is the intended behavior of the block.

Solution
Check X high and low limits and adjust as necessary.

3.13.41 2985
The indicated block encountered a fatal error during an Alias Table Load.
The block may not be activated or have its selected alias table instance changed until this condition has been
cleared.

Error ID
CodeATLoadFailed

Error name
ATLoadFailed

366 www.honeywell.com
 3 ERROR CODES

Cause
An attempted load of the alias table has failed leaving parameter ATLOADSTATE at value FAILED.

Solution
Start the load of the alias table over again. Once it completes, retry the desired action.

3.13.42 2986
Some actions, such as inactivation of an SCM or RCM, cannot be performed without disrupting an alias table
load which has not yet completed. The requested action is allowed to complete successfully but forces the alias
table load to fail.

Error ID
CodeATLoadInProgressWarning

Error name
ATLoadInProgressWarning

Cause
An action was requested, such as inactivation of an SCM or RCM, at a time when a previously requested alias
table load had not completed.

Solution
After the requested action completes, start the load of the alias table over again.

3.13.43 2987
Some actions can only be performed when the alias table load state has a prescribed value. For example, the
signal to end an alias table load cannot be accepted unless alias table load state is WAITINGEND.

Error ID
CodeATLoadStateInvalid

Error name
ATLoadStateInvalid

Cause
An action was requested, such as change of ATLOADSTATE, which is disallowed when the current value of
ATLOADSTATE holds.

Solution
Start the load of the alias table over again. If additional action is desired, retry the action after table load
completes.

3.13.44 2988
This failure is generated when data size in DC doesn't match the expected size.

367
3 ERROR CODES

Error ID
CodeDataSizeMismatch

Error name
DataSizeMismatch

Cause
Interoperability between unsupported releases.

Solution
None.

3.13.45 2989
Indicates that the DataSize is greater than maxDataSize set by the initiator so the message is truncated.

Error ID
CodeDataTruncated

Error name
DataTruncated

Cause
More data was received than expected. This is possible if the sender of the data resides in a controller with
newer firmware than the receiver of the data. There are no known scenarios where this can occur within the
same controller or between controllers with the same firmware.

Solution
The receiver of the choice to treat this as error or use the truncated data. In case of phase block to SCM, RCM,
or Activity communication, the truncated data is used resulting in functionality corresponding to the older
firmware.

3.13.46 2990
Indicates that the store to peer did not complete successfully within the configured Store Expiration Time.

Error ID
CodePeerStoreTimeoutError

Error name
StoreTimeout

Cause
1. Generic communication problems.
2. The destination controller path is unknown.
This is the case if the array IPEERNAME does not contain the name of the destination controller.
Refer to the CEE block, Peer Communications tab, Initiator connections.

368 www.honeywell.com
 3 ERROR CODES

Solution
Ensure that system resources are not being exceeded. Configure the store expiration time depending on the type
of peer and traffic on the network.

3.13.47 2991
Notifies that the alias instance (column) selection has changed while one or more aliases where in use by phases
in RCM or Activity. The encountered situation may indicate an application engineering error.
In some configurations the impact may be harmless or intended. In most typical configurations, however,
difficult to trace production errors may occur. It indicates that phase report parameters may be written to a
different alias selection than the resource which was acquired and possibly executed by the phase block.
It is the responsibility of the application engineer to assess the situation and decide, if the warning can be
ignored. This warning cannot be suppressed.

Error ID
CodeChangedInstanceSelect

Error name
ChangedInstanceSelect

Cause
This error occurs if the following conditions are satisfied at the same time:
1. RCM or Activity has an Alias Table (ALIASOPT=ON)
2. RCM or Activity has phase blocks
3. At least one phase blocks uses an alias for equipment name selection ( USENAMEREF=knameRef)
4. Such phase block uses report parameters with aliases in the parameter reference.
5. INSTSELECT was changed after phase block has acquired the resource specified in EQUIPNAMEREF but
before phase block has written all report parameters.

Solution
Change the timing of changes of INSTSELECT in such a way, that cause 5) above is not encountered. The
insertion of dummy steps or phases into the RCM or Activity may be necessary to achieve suitable time
windows.

3.13.48 2992
Indicates that the execution status fail filter value that was entered was rounded up to be a multiple of the
execution period.

Error ID
CodeExecStsFailTmWarning

Error name
ExecStsFailTmWarning

Cause
This error occurs when EXECSTSFAILTM is downloaded or changed and is not an exact multiple of the
configured period.

369
3 ERROR CODES

Example, if the current execution period is 2 seconds, and the value entered for EXECSTSFAILTM is 5
seconds, then the error displays the warning and the value stored by the controller is 6 seconds.

Solution
None, if the rounded value is acceptable. If not, a different combination of EXECSTSFAILTM and PERIOD
should be selected.

3.13.49 2993
Indicates that the execution status fail filter value that was entered was rounded up to be a multiple of the
execution period.

Error ID
CodeExecStsFailTmPerWarning

Error name
ExecStsFailTmPerWarning

Cause
This error occurs when the execution period of an SCM, RCM or Activity is being changed and the existing
value for EXECSTSFAILTM is not an exact multiple of the new period.
Example:
Current Execution Period is 2 seconds,
Current EXECSTSFAILTM is 16 seconds. Execution period is then changed to 5 seconds. This causes the
warning to be displayed and the value stored for EXECSTSFAILTM to the controller is 20 seconds.

Solution
None required, if the rounded value is acceptable. If not, a different combination of EXECSTSFAILTM and
PERIOD shall be selected.

3.13.50 2994
Indicates that the Output Delay Time value that was entered was round up to be a multiple of the execution
period.

Error ID
CodeStepOpDelayTimeRndWarning

Error name
StepOpDelayTimeRndWarning

Cause
This happens when OP.DELAYTIME is downloaded or changed and is not an exact multiple of the configured
period.
Example, If the current Execution Period is 2 seconds, and the value entered for OP.DELAYTIME is 5, this will
cause this warning to be displayed and the value stored by the controller will be 6 seconds.

370 www.honeywell.com
 3 ERROR CODES

Solution
None required. If the rounded value is acceptable. Otherwise a different combination of OP.DELAYTIME and
PERIOD shall be selected.

3.13.51 2995
Checkpoint Session maintained by the CC3 Blob Array splitter doesn't match CC3Proxy instance.

Error ID
CodeInvalidSession

Error name
InvalidSession

Cause
None.

Solution
None.

3.13.52 2996
CC3 Block Structure version mismatch between the version identifier stored in Checkpoint data and the version
identifier defined in cC3 module.

Error ID
CodeStructureVersionMismatch

Error name
StructureVersionMismatch

Cause
None.

Solution
None.

3.13.53 2997
Array access was not in sequence.

Error ID
CodeArrayIndexNotInSequence

Error name
ArrayIndexNotInSequence

371
3 ERROR CODES

Cause
None.

Solution
None.

372 www.honeywell.com
 3 ERROR CODES

3.14 Codes 3005 to 3198

Related topics
“3005” on page 373
“3006” on page 374
“3007” on page 374
“3008” on page 374
“3009” on page 375
“3010” on page 375
“3011” on page 375
“3012” on page 376
“3013” on page 376
“3014” on page 376
“3015” on page 377
“3016” on page 377
“3019” on page 377
“3020” on page 378
“3021” on page 378
“3022” on page 378
“3023” on page 379
“3024” on page 379
“3025” on page 379
“3026” on page 380
“3027” on page 380
“3028” on page 380
“3029” on page 381
“3030” on page 381
“3031” on page 381
“3032” on page 382

3.14.1 3005
Hardware error detected by loader diagnostics.

Error ID
FIM_E_FCI_BOOT_DIAG_ERROR

Error name
BootDiagError

Cause
None.

Solution
None.

373
3 ERROR CODES

3.14.2 3006
Hardware error detected by startup diagnostics.

Error ID
FIM_E_FCI_STARTUP_DIAG_ERROR

Error name
StartupDiagError

Cause
None.

Solution
None.

3.14.3 3007
Unrecoverable error on board.

Error ID
FIM_E_FCI_FATAL_ERROR

Error name
FatalError

Cause
None.

Solution
None.

3.14.4 3008
Invalid initialize parameter.

Error ID
FIM_E_FCI_INIT_INVALID_PARAMETER

Error name
InitInvalidParameter

Cause
None.

Solution
None.

374 www.honeywell.com
 3 ERROR CODES

3.14.5 3009
Download firmware error.

Error ID
FIM_E_FCI_LOADER_ERROR

Error name
LoaderError

Cause
None.

Solution
None.

3.14.6 3010
Controller does not respond.

Error ID
FIM_E_FCI_NO_CNTRL_RES

Error name
NoCntrlRes

Cause
None.

Solution
None.

3.14.7 3011
Invalid controller type or software version.

Error ID
FIM_E_FCI_INVALID_CNTRL_TYPE_VERSION

Error name
InvalidCntrlTypeVersion

Cause
None.

Solution
None.

375
3 ERROR CODES

3.14.8 3012
Invalid layer.

Error ID
FIM_E_FCI_INVALID_LAYER

Error name
InvalidLayer

Cause
None.

Solution
None.

3.14.9 3013
Invalid service Identifier.

Error ID
FIM_E_FCI_INVALID_SERVICE

Error name
InvalidService

Cause
None.

Solution
None.

3.14.10 3014
Invalid service primitive.

Error ID
FIM_E_FCI_INVALID_PRIMITIVE

Error name
InvalidPrimitive

Cause
None.

Solution
None.

376 www.honeywell.com
 3 ERROR CODES

3.14.11 3015
Not enough CMI data block memory.

Error ID
FIM_E_FCI_INVALID_DATA_SIZE

Error name
InvalidDataSize

Cause
None.

Solution
None.

3.14.12 3016
Invalid communication reference.

Error ID
FIM_E_FCI_INVALID_COMM_REF

Error name
InvalidCommRef

Cause
None.

Solution
None.

3.14.13 3019
Invalid CMI call.

Error ID
FIM_E_FCI_INVALID_CMI_CALL

Error name
InvalidCMICall

Cause
None.

Solution
None.

377
3 ERROR CODES

3.14.14 3020
Error occurred in CMI.

Error ID
FIM_E_FCI_CMI_ERROR

Error name
CMIError

Cause
None.

Solution
None.

3.14.15 3021
No resource available.

Error ID
FIM_E_FCI_RESOURCE_UNAVAILABLE

Error name
ResourceUnavailable

Cause
None.

Solution
None.

3.14.16 3022
No parallel services allowed.

Error ID
FIM_E_FCI_NO_PARALLEL_SERVICES

Error name
NoParallelServices

Cause
None.

Solution
None.

378 www.honeywell.com
 3 ERROR CODES

3.14.17 3023
Service construction conflict.

Error ID
FIM_E_FCI_SERVICE_CONSTR_CONFLICT

Error name
ServiceConstrConflict

Cause
None.

Solution
None.

3.14.18 3024
Service not supported.

Error ID
FIM_E_FCI_SERVICE_NOT_SUPPORTED

Error name
ServiceNotSupported

Cause
None.

Solution
None.

3.14.19 3025
Service not executable.

Error ID
FIM_E_FCI_SERVICE_NOT_EXECUTABLE

Error name
ServiceNotExecutable

Cause
None.

Solution
None.

379
3 ERROR CODES

3.14.20 3026
Loader not present.

Error ID
FIM_E_FCI_LOADER_NOT_PRESENT

Error name
LoaderNotPresent

Cause
None.

Solution
None.

3.14.21 3027
Loader timed out.

Error ID
FIM_E_FCI_LOADER_TIMEOUT

Error name
LoaderTimeout

Cause
None.

Solution
None.

3.14.22 3028
Invalid loader version.

Error ID
FIM_E_FCI_LOADER_VERSION

Error name
LoaderVersion

Cause
None.

Solution
None.

380 www.honeywell.com
 3 ERROR CODES

3.14.23 3029
Invalid command.

Error ID
FIM_E_FCI_COMMAND_ERROR

Error name
CommandError

Cause
None.

Solution
None.

3.14.24 3030
Size exceeded.

Error ID
FIM_E_FCI_DPRAM_SIZE_EXCEEDED

Error name
PramSizeExceeded

Cause
None.

Solution
None.

3.14.25 3031
Loader Is busy.

Error ID
FIM_E_FCI_LOADER_BUSY

Error name
LoaderBusy

Cause
None.

Solution
None.

381
3 ERROR CODES

3.14.26 3032
Unknown error.

Error ID
FIM_E_FCI_OTHER

Error name
Other

Cause
None.

Solution
None.

382 www.honeywell.com
 3 ERROR CODES

3.15 Codes 3100 to 3198

Related topics
“3100” on page 385
“3101” on page 385
“3102” on page 385
“3103” on page 386
“3104” on page 386
“3105” on page 386
“3106” on page 387
“3107” on page 387
“3108” on page 387
“3109” on page 388
“3110” on page 388
“3111” on page 388
“3112” on page 389
“3113” on page 389
“3114” on page 389
“3115” on page 390
“3116” on page 390
“3117” on page 390
“3118” on page 391
“3119” on page 391
“3120” on page 391
“3121” on page 392
“3122” on page 392
“3123” on page 392
“3124” on page 393
“3125” on page 393
“3126” on page 393
“3127” on page 394
“3128” on page 394
“3129” on page 394
“3130” on page 395
“3131” on page 395
“3132” on page 395
“3134” on page 396
“3135” on page 396
“3136” on page 396
“3137” on page 397
“3138” on page 397
“3139” on page 397
“3140” on page 398
“3150” on page 398
“3151” on page 398
“3152” on page 399
“3153” on page 399

383
3 ERROR CODES

“3154” on page 399

“3155” on page 400
“3156” on page 400
“3157” on page 400
“3158” on page 401
“3159” on page 401
“3160” on page 401
“3161” on page 402
“3162” on page 402
“3163” on page 402
“3164” on page 403
“3165” on page 403
“3166” on page 403
“3167” on page 404
“3168” on page 404
“3169” on page 404
“3170” on page 405
“3171” on page 405
“3172” on page 405
“3173” on page 406
“3174” on page 406
“3175” on page 406
“3176” on page 407
“3177” on page 407
“3178” on page 407
“3179” on page 408
“3180” on page 408
“3181” on page 408
“3182” on page 409
“3183” on page 409
“3184” on page 409
“3185” on page 410
“3186” on page 410
“3187” on page 410
“3188” on page 411
“3189” on page 411
“3190” on page 411
“3191” on page 412
“3192” on page 412
“3193” on page 412
“3194” on page 413
“3195” on page 413
“3196” on page 413
“3197” on page 414
“3198” on page 414

384 www.honeywell.com
 3 ERROR CODES

3.15.1 3100
Disconnected by user.

Error ID
FIM_E_USR_ABT_RC1

Error name
UsrAbtRC1

Cause
None.

Solution
None.

3.15.2 3101
Version Object Dictionary incompatible.

Error ID
FIM_E_USR_ABT_RC2

Error name
UsrAbtRC2

Cause
None.

Solution
None.

3.15.3 3102
Password error.

Error ID
FIM_E_USR_ABT_RC3

Error name
UsrAbtRC3

Cause
None.

Solution
None.

385
3 ERROR CODES

3.15.4 3103
Profile number incompatible.

Error ID
FIM_E_USR_ABT_RC4

Error name
UsrAbtRC4

Cause
None.

Solution
None.

3.15.5 3104
Limited services permitted.

Error ID
FIM_E_USR_ABT_RC5

Error name
UsrAbtRC5

Cause
None.

Solution
None.

3.15.6 3105
Object Dictionary (OD) loading interacting.

Error ID
FIM_E_USR_ABT_RC6

Error name
UsrAbtRC6

Cause
None.

Solution
None.

386 www.honeywell.com
 3 ERROR CODES

3.15.7 3106
Fieldbus Message Specification (FMS)- Virtual Communications Relationship (VCR) error.

Error ID
FIM_E_FMS_ABT_RC1

Error name
FMSAbtRC1

Cause
None.

Solution
None.

3.15.8 3107
User error (protocol violation by user).

Error ID
FIM_E_FMS_ABT_RC2

Error name
FMSAbtRC2

Cause
None.

Solution
None.

3.15.9 3108
Fieldbus Message Specification (FMS)- Protocol Data Unit (PDU) error.

Error ID
FIM_E_FMS_ABT_RC3

Error name
FMSAbtRC3

Cause
None.

Solution
None.

387
3 ERROR CODES

3.15.10 3109
Connection state conflict Fieldbus Access Sublayer (FAS).

Error ID
FIM_E_FMS_ABT_RC4

Error name
FMSAbtRC4

Cause
None.

Solution
None.

3.15.11 3110
Fieldbus Access Sublayer (FAS) error.

Error ID
FIM_E_FMS_ABT_RC5

Error name
FMSAbtRC5

Cause
None.

Solution
None.

3.15.12 3111
Protocol Data Unit (PDU) size exceeds maximum PDU size.

Error ID
FIM_E_FMS_ABT_RC6

Error name
FMSAbtRC6

Cause
None.

Solution
None.

388 www.honeywell.com
 3 ERROR CODES

3.15.13 3112
Feature not supported.

Error ID
FIM_E_FMS_ABT_RC7

Error name
FMSAbtRC7

Cause
None.

Solution
None.

3.15.14 3113
Invoke ID error in service response.

Error ID
FIM_E_FMS_ABT_RC8

Error name
FMSAbtRC8

Cause
None.

Solution
None.

3.15.15 3114
Maximum services overflow.

Error ID
FIM_E_FMS_ABT_RC9

Error name
FMSAbtRC9

Cause
None.

Solution
None.

389
3 ERROR CODES

3.15.16 3115
Connection state conflict Fieldbus Message Specification (FMS) (Initiate.req).

Error ID
FIM_E_FMS_ABT_RC10

Error name
FMSAbtRC10

Cause
None.

Solution
None.

3.15.17 3116
Service error.

Error ID
FIM_E_FMS_ABT_RC11

Error name
FMSAbtRC11

Cause
None.

Solution
None.

3.15.18 3117
Invoke ID error in service request.

Error ID
FIM_E_FMS_ABT_RC12

Error name
FMSAbtRC12

Cause
None.

Solution
None.

390 www.honeywell.com
 3 ERROR CODES

3.15.19 3118
Fieldbus Message Specification (FMS) is disabled.

Error ID
FIM_E_FMS_ABT_RC13

Error name
FMSAbtRC13

Cause
None.

Solution
None.

3.15.20 3119
Invalid Fieldbus Access Sublayer (FAS) Protocol Data Unit (PDU).

Error ID
FIM_E_FAS_ABT_RC1

Error name
FASAbtRC1

Cause
None.

Solution
None.

3.15.21 3120
Remote address mismatch.

Error ID
FIM_E_FAS_ABT_RC2

Error name
FASAbtRC2

Cause
None.

Solution
None.

391
3 ERROR CODES

3.15.22 3121
Multiple initiators.

Error ID
FIM_E_FAS_ABT_RC3

Error name
FASAbtRC3

Cause
None.

Solution
None.

3.15.23 3122
Invalid Data Link (DL) event.

Error ID
FIM_E_FAS_ABT_RC4

Error name
FASAbtRC4

Cause
None.

Solution
None.

3.15.24 3123
Application Relationship End Point (AREP) busy.

Error ID
FIM_E_FAS_ABT_RC5

Error name
FASAbtRC5

Cause
None.

Solution
None.

392 www.honeywell.com
 3 ERROR CODES

3.15.25 3124
Application Relationship End Point (AREP) not found

Error ID
FIM_E_FAS_ABT_RC6

Error name
FASAbtRC6

Cause
None.

Solution
None.

3.15.26 3125
Invalid Application Relationship End Point (AREP) type.

Error ID
FIM_E_FAS_ABT_RC7

Error name
FASAbtRC7

Cause
None.

Solution
None.

3.15.27 3126
Data Link Connection End Point (DLCEP) not found.

Error ID
FIM_E_FAS_ABT_RC8

Error name
FASAbtRC8

Cause
None.

Solution
None.

393
3 ERROR CODES

3.15.28 3127
Incorrect Data Link Connection End Point (DLCEP) pairing, permanent.

Error ID
FIM_E_DLL_DC_PP_PAIRING

Error name
DllDcPpPairing

Cause
None.

Solution
None.

3.15.29 3128
Other permanent condition.

Error ID
FIM_E_DLL_DC_PP_OTHER

Error name
DllDcPpOther

Cause
None.

Solution
None.

3.15.30 3129
Other permanent condition.

Error ID
FIM_E_DLL_DC_PT_DISC

Error name
DllDcPtDisc

Cause
None.

Solution
None.

394 www.honeywell.com
 3 ERROR CODES

3.15.31 3130
Timeout

Error ID
FIM_E_DLL_DC_P_TIMEOUT

Error name
DllDcPTimeout

Cause
None.

Solution
None.

3.15.32 3131
Unspecified connection rejection.

Error ID
FIM_E_DLL_DC_P_UNSPECIFIED

Error name
DllDcPUnspecified

Cause
None.

Solution
None.

3.15.33 3132
Data Link (DL) Service Access Point (SAP) address unknown.

Error ID
FIM_E_DLL_DC_P_REJ_ADDR_UNKNOWN

Error name
DllDcPRejAddrUnknown

Cause
None.

Solution
None.

395
3 ERROR CODES

3.15.34 3134
Data Link (DL) Service Access Point (SAP) unreachable, permanent.

Error ID
FIM_E_DLL_DC_PP_REJ_UNREACHABLE

Error name
DllDcPpRejUnreachable

Cause
None.

Solution
None.

3.15.35 3135
Data Link (DL) Service Access Point (SAP) unreachable, transient.

Error ID
FIM_E_DLL_DC_PT_REJ_UNREACHABLE

Error name
DllDcPtRejUnreachable

Cause
None.

Solution
None.

3.15.36 3136
Wrong Data Link Connection End Point (DLCEP) state, permanent.

Error ID
FIM_E_DLL_DC_PP_REJ_STATE

Error name
DllWrongState

Cause
None.

Solution
None.

396 www.honeywell.com
 3 ERROR CODES

3.15.37 3137
QoS (ParameterSet) unavailable, permanent condition.

Error ID
FIM_E_DLL_DC_PP_REJ_QOS

Error name
DllDcPpRejQos

Cause
None.

Solution
None.

3.15.38 3138
QoS (ParameterSet) unavailable, transient condition - unknown error.

Error ID
FIM_E_DLL_DC_PT_REJ_QOS

Error name
DllDcPtRejQos

Cause
None.

Solution
None.

3.15.39 3139
Unknown origin - reason unspecified.

Error ID
FIM_E_DLL_DC_UNKNOWN

Error name
DllDcUnknown

Cause
None.

Solution
None.

397
3 ERROR CODES

3.15.40 3140
Unspecified abort reason.

Error ID
FIM_E_ABT_OTHER

Error name
UsrAbtRC1

Cause
None.

Solution
None.

3.15.41 3150
Unspecified Fieldbus Message Specification (FMS) initiate error.

Error ID
FIM_E_FMS_INIT_OTHER

Error name
FMSInitOther

Cause
None.

Solution
None.

3.15.42 3151
Fieldbus Message Specification (FMS) initiate maximum Protocol Data Unit (PDU) Size insufficient.

Error ID
FIM_E_FMS_INIT_MAX_PDU_SIZE_INSUFF

Error name
FMSInitMaxPduSizeInsuff

Cause
None.

Solution
None.

398 www.honeywell.com
 3 ERROR CODES

3.15.43 3152
Fieldbus Message Specification (FMS) initiate feature not supported.

Error ID
FIM_E_FMS_INIT_FEAT_NOT_SUPPORTED

Error name
FMSInitFeatNotSupported

Cause
None.

Solution
None.

3.15.44 3153
Fieldbus Message Specification (FMS) initiate version Object Dictionary (OD) is incompatible.

Error ID
FIM_E_FMS_INIT_OD_VERSION_INCOMP

Error name
FMSInitOdVersionIncomp

Cause
None.

Solution
None.

3.15.45 3154
Fieldbus Message Specification (FMS) user initiate denied.

Error ID
FIM_E_FMS_INIT_USER_DENIED

Error name
FMSInitUserDenied

Cause
None.

Solution
None.

399
3 ERROR CODES

3.15.46 3155
Fieldbus Message Specification (FMS) initiate password error

Error ID
FIM_E_FMS_INIT_PASSWORD_ERROR

Error name
FMSInitPasswordError

Cause
None.

Solution
None.

3.15.47 3156
Fieldbus Message Specification (FMS) initiate incompatible profile number.

Error ID
FIM_E_FMS_INIT_PROFILE_NUMB_INCOMP

Error name
FMSInitProfileNumbIncomp

Cause
None.

Solution
None.

3.15.48 3157
Unspecified Fieldbus Message Specification (FMS) Virtual Field Device (VFD) state error.

Error ID
FIM_E_FMS_VFD_STATE_OTHER

Error name
FMSVfdStateOther

Cause
None.

Solution
None.

400 www.honeywell.com
 3 ERROR CODES

3.15.49 3158
Unspecified Fieldbus Message Specification (FMS) application error.

Error ID
FIM_E_FMS_APPLICATION_OTHER

Error name
FMSApplicationOther

Cause
None.

Solution
None.

3.15.50 3159
Fieldbus Message Specification (FMS) application unreachable.

Error ID
FIM_E_FMS_APPLICATION_UNREACHABLE

Error name
FMSApplicationUnreachable

Cause
None.

Solution
None.

3.15.51 3160
Unspecified Fieldbus Message Specification (FMS) definition error.

Error ID
FIM_E_FMS_DEF_OTHER

Error name
FMSDefOther

Cause
None.

Solution
None.

401
3 ERROR CODES

3.15.52 3161
Fieldbus Message Specification (FMS) undefined object error.

Error ID
FIM_E_FMS_DEF_OBJ_UNDEF

Error name
FMSDefObjUndef

Cause
None.

Solution
None.

3.15.53 3162
Fieldbus Message Specification (FMS) object attributes inconsistent.

Error ID
FIM_E_FMS_DEF_OBJ_ATTR_INCONSIST

Error name
FMSDefObjAttrInconsist

Cause
None.

Solution
None.

3.15.54 3163
Fieldbus Message Specification (FMS) object already exists.

Error ID
FIM_E_FMS_DEF_OBJECT_ALREADY_EXISTS

Error name
FMSdefObjectAlreadyExists

Cause
None.

Solution
None.

402 www.honeywell.com
 3 ERROR CODES

3.15.55 3164
Unspecified Fieldbus Message Specification (FMS) resource error.

Error ID
FIM_E_FMS_RESOURCE_OTHER

Error name
FMSResourceOther

Cause
None.

Solution
None.

3.15.56 3165
Fieldbus Message Specification (FMS) resource memory unavailable.

Error ID
FIM_E_FMS_RESOURCE_MEM_UNAVAILABLE

Error name
FMSResourceMemUnavailable

Cause
None.

Solution
None.

3.15.57 3166
Unspecified Fieldbus Message Specification (FMS) service error.

Error ID
FIM_E_FMS_SERV_OTHER

Error name
FMSServOther

Cause
None.

Solution
None.

403
3 ERROR CODES

3.15.58 3167
Fieldbus Message Specification (FMS) service object state conflict.

Error ID
FIM_E_FMS_SERV_OBJ_STATE_CONFLICT

Error name
FMSServObjStateConflict

Cause
None.

Solution
None.

3.15.59 3168
None.

Error ID
FIM_E_FMS_SERV_PDU_SIZE

Error name
FMSServPduSize

Cause
None.

Solution
None.

3.15.60 3169
Fieldbus Message Specification (FMS) object constraint conflict.

Error ID
FIM_E_FMS_SERV_OBJ_CONSTR_CONFLICT

Error name
FMSServObjConstrConflict

Cause
None.

Solution
None.

404 www.honeywell.com
 3 ERROR CODES

3.15.61 3170
Fieldbus Message Specification (FMS) service inconsistent parameter.

Error ID
FIM_E_FMS_SERV_PARAM_INCONSIST

Error name
FMSServParamInconsist

Cause
None.

Solution
None.

3.15.62 3171
Fieldbus Message Specification (FMS) service illegal parameter.

Error ID
FIM_E_FMS_SERV_ILLEGAL_PARAM

Error name
FMSServIllegalParam

Cause
None.

Solution
None.

3.15.63 3172
Unspecified Fieldbus Message SpecifiMS) access error.

Error ID
FIM_E_FMS_ACCESS_OTHER

Error name
FMSAccessOther

Cause
None.

Solution
None.

405
3 ERROR CODES

3.15.64 3173
Fieldbus Message Specification (FMS) access object invalidated.

Error ID
FIM_E_FMS_ACCESS_OBJ_INVALIDATED

Error name
FMSAccessObjInvalidated

Cause
None.

Solution
None.

3.15.65 3174
Fieldbus Message Specification (FMS) access error hardware fault.

Error ID
FIM_E_FMS_ACCESS_HARDWARE_FAULT

Error name
FMSAccessHardwareFault

Cause
None.

Solution
None.

3.15.66 3175
Fieldbus Message Specification (FMS) object access denied.

Error ID
FIM_E_FMS_ACCESS_OBJ_ACCESS_DENIED

Error name
FMSAccessObjAccessDenied

Cause
None.

Solution
None.

406 www.honeywell.com
 3 ERROR CODES

3.15.67 3176
Fieldbus Message Specification (FMS) Invalid Address Access.

Error ID
FIM_E_FMS_ACCESS_ADDR_INVALID

Error name
FMSAccessAddrInvalid

Cause
None.

Solution
None.

3.15.68 3177
Fieldbus Message Specification (FMS) access object attribute inconsistent.

Error ID
FIM_E_FMS_ACCESS_OBJ_ATTR_INCONST

Error name
FMSAccessObjAttrInconst

Cause
None.

Solution
None.

3.15.69 3178
Fieldbus Message Specification (FMS) object access unsupported.

Error ID
FIM_E_FMS_ACCESS_OBJ_ACCESS_UNSUPP

Error name
FMSAccessObjAccessUnsupp

Cause
None.

Solution
None.

407
3 ERROR CODES

3.15.70 3179
Fieldbus Message Specification (FMS) access object does not exist.

Error ID
FIM_E_FMS_ACCESS_OBJ_NON_EXIST

Error name
FMSAccessObjNonExist

Cause
None.

Solution
None.

3.15.71 3180
Fieldbus Message Specification (FMS) access type conflict.

Error ID
FIM_E_FMS_ACCESS_TYPE_CONFLICT

Error name
FMSAccessTypeConflict

Cause
None.

Solution
None.

3.15.72 3181
Fieldbus Message Specification (FMS) name access unsupported.

Error ID
FIM_E_FMS_ACCESS_NAME_ACCESS_UNSUP

Error name
FMSAccessNameAccessUnsup

Cause
None.

Solution
None.

408 www.honeywell.com
 3 ERROR CODES

3.15.73 3182
Fieldbus Message Specification (FMS) element access unsupported.

Error ID
FIM_E_FMS_ACCESS_TO_ELEMENT_UNSUPP

Error name
FMSAccessToElementUnsupp

Cause
None.

Solution
None.

3.15.74 3183
Unspecified Fieldbus Message Specification (FMS) Object Dictionary (OD) error.

Error ID
FIM_E_FMS_OD_OTHER

Error name
FMSOdOther

Cause
None.

Solution
None.

3.15.75 3184
Fieldbus Message Specification (FMS) Object Dictionary (OD) name length overflow.

Error ID
FIM_E_FMS_OD_NAME_LEN_OVERFLOW

Error name
FMSOdNameLenOverflow

Cause
None.

Solution
None.

409
3 ERROR CODES

3.15.76 3185
Fieldbus Message Specification (FMS) Object Dictionary (OD) overflow.

Error ID
FIM_E_FMS_OD_OVERFLOW

Error name
FMSOdOverflow

Cause
None.

Solution
None.

3.15.77 3186
Fieldbus Message Specification (FMS) Object Dictionary (OD) write protected.

Error ID
FIM_E_FMS_OD_WRITE_PROTECT

Error name
FMSOdWriteProtect

Cause
None.

Solution
None.

3.15.78 3187
Fieldbus Message Specification (FMS) Object Dictionary (OD) extension length overflow.

Error ID
FIM_E_FMS_OD_EXTENSION_LEN_OVERFLOW

Error name
FMSOdExtensionLenOverflow

Cause
None.

Solution
None.

410 www.honeywell.com
 3 ERROR CODES

3.15.79 3188
Fieldbus Message Specification (FMS) Object Dictionary (OD) object descriptor overflow.

Error ID
FIM_E_FMS_OD_OBJ_DESCR_OVERFLOW

Error name
FMSOdObjDescrOverflow

Cause
None.

Solution
None.

3.15.80 3189
Fieldbus Message Specification (FMS) Object Dictionary (OD) operational problem.

Error ID
FIM_E_FMS_OD_OPERAT_PROBLEM

Error name
FMSOdOperatProblem

Cause
None.

Solution
None.

3.15.81 3190
Unspecified Fieldbus Message Specification (FMS) error.

Error ID
FIM_E_FMS_OTHER

Error name
FMSOther

Cause
None.

Solution
None.

411
3 ERROR CODES

3.15.82 3191
Parameter check error.

Error ID
FIM_E_FMS_PARAM_CHECK

Error name
FMSParamCheck

Cause
None.

Solution
None.

3.15.83 3192
Exceeds parameter limits.

Error ID
FIM_E_FMS_PARAM_LIMITS

Error name
FMSParamLimits

Cause
User entry is outside valid range of values for given parameter. For example, user attempts to set the set point
(SP) to 150 while SP range is configured for 0 to 100.

Solution
Enter valid value and retry the operation.

3.15.84 3193
Wrong mode for request.

Error ID
FIM_E_FMS_WRONG_MODE

Error name
FMSWrongMode

Cause
None.

412 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.15.85 3194
Write is prohibited by write lock switch.

Error ID
FIM_E_FMS_WRITE_LOCK

Error name
FMSWriteLock

Cause
None.

Solution
None.

3.15.86 3195
Data value is read-only.

Error ID
FIM_E_FMS_READ_ONLY

Error name
FMSReadOnly

Cause
None.

Solution
None.

3.15.87 3196
Instantiate not supported or unsuccessful.

Error ID
FIM_E_FMS_NO_INSTANTIATE

Error name
FMSNoInstantiate

Cause
None.

413
3 ERROR CODES

Solution
None.

3.15.88 3197
Delete not supported or unsuccessful.

Error ID
FIM_E_FMS_NO_DELETE

Error name
FMSNoDelete

Cause
None.

Solution
None.

3.15.89 3198
Alarm already acknowledged.

Error ID
FIM_E_FMS_NO_ALARM

Error name
FMSNoAlarm

Cause
None.

Solution
None.

414 www.honeywell.com
 3 ERROR CODES

3.16 Codes 3200 to 3521

Related topics
“3200” on page 416
“3201” on page 416
“3202” on page 417
“3203” on page 417
“3204” on page 417
“3205” on page 418
“3206” on page 418
“3207” on page 418
“3208” on page 419
“3209” on page 419
“3210” on page 419
“3212” on page 420
“3213” on page 420
“3214” on page 420
“3215” on page 421
“3216” on page 421
“3217” on page 421
“3218” on page 422
“3219” on page 422
“3220” on page 422
“3221” on page 423
“3222” on page 423
“3223” on page 423
“3224” on page 424
“3225” on page 424
“3226” on page 424
“3227” on page 425
“3250” on page 425
“3251” on page 425
“3252” on page 426
“3253” on page 426
“3254” on page 426
“3255” on page 427
“3256” on page 427
“3257” on page 427
“3258” on page 428
“3259” on page 428
“3260” on page 428
“3261” on page 429
“3262” on page 429
“3263” on page 429
“3264” on page 430
“3265” on page 430
“3266” on page 430

415
3 ERROR CODES

“3267” on page 431

“3268” on page 431
“3269” on page 431
“3270” on page 432
“3271” on page 432
“3272” on page 432
“3273” on page 433
“3274” on page 433
“3275” on page 433
“3276” on page 434
“3277” on page 434
“3278” on page 434
“3279” on page 435
“3280” on page 435
“3281” on page 435
“3282” on page 436
“3290” on page 436
“3291” on page 436
“3292” on page 437
“3293” on page 437
“3294” on page 437
“3295” on page 438
“3296” on page 438

3.16.1 3200
Unspecified Network Management Agent (NMA) application error.

Error ID
FIM_E_NMA_APPLICATION_OTHER

Error name
NMAApplicationOther

Cause
None.

Solution
None.

3.16.2 3201
Network Management Agent (NMA) application unreachable.

Error ID
FIM_E_NMA_APPLICATION_UNREACHABLE

Error name
NMAApplicationUnreachable

416 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.3 3202
Unspecified Network Management Agent (NMA) resource error.

Error ID
FIM_E_NMA_RESOURCE_OTHER

Error name
NMAResourceOther

Cause
None.

Solution
None.

3.16.4 3203
Network Management Agent (NMA) resource memory unavailable.

Error ID
FIM_E_NMA_RESOURCE_MEM_UNAVAILABLE

Error name
NMAResourceMemUnavailable

Cause
None.

Solution
None.

3.16.5 3204
Unspecified Network Management Agent (NMA) service error.

Error ID
FIM_E_NMA_SERV_OTHER

Error name
NMAServOther

417
3 ERROR CODES

Cause
None.

Solution
None.

3.16.6 3205
Network Management Agent (NMA) service object state conflict.

Error ID
FIM_E_NMA_SERV_OBJ_STATE_CONFLICT

Error name
NMAServObjStateConflict

Cause
None.

Solution
None.

3.16.7 3206
Network Management Agent (NMA) service object construction conflict.

Error ID
FIM_E_NMA_SERV_OBJ_CONSTR_CONFLICT

Error name
NMAServObjConstrConflict

Cause
None.

Solution
None.

3.16.8 3207
Inconsistent Parameter In Network Management Agent (NMA) Service.

Error ID
FIM_E_NMA_SERV_PARAM_INCONSIST

Error name
NMAServParamInconsist

418 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.9 3208
Illegal parameter In Network Management Agent (NMA) service.

Error ID
FIM_E_NMA_SERV_ILLEGAL_PARAM

Error name
NMAServIllegalParam

Cause
None.

Solution
None.

3.16.10 3209
Permanent Internal Fault In Network Management Agent (NMA) Service.

Error ID
FIM_E_NMA_SERV_PERM_INTERN_FAULT

Error name
NMAServPermInternFault

Cause
None.

Solution
None.

3.16.11 3210
Unspecified Network Management Agent (NMA) user error.

Error ID
FIM_E_NMA_USR_OTHER

Error name
NMAUsrOther

419
3 ERROR CODES

Cause
None.

Solution
None.

3.16.12 3212
Network Management Agent (NMA) user memory unavailable.

Error ID
FIM_E_NMA_USR_MEM_UNAVAILABLE

Error name
NMAUsrMemUnavailable

Cause
None.

Solution
None.

3.16.13 3213
Unspecified Network Management Agent (NMA) access error.

Error ID
FIM_E_NMA_ACCESS_OTHER

Error name
NMAAccessOther

Cause
None.

Solution
None.

3.16.14 3214
Object access unsupported in Network Management Agent (NMA).

Error ID
FIM_E_NMA_ACCESS_OBJ_ACC_UNSUP

Error name
NMAAccessObjAccUnsup

420 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.15 3215
Object does not exist in Network Management Agent (NMA).

Error ID
FIM_E_NMA_ACCESS_OBJ_NON_EXIST

Error name
NMAAccessObjNonExist

Cause
None.

Solution
None.

3.16.16 3216
Object access denied in Network Management Agent (NMA).

Error ID
FIM_E_NMA_ACCESS_OBJ_ACCESS_DENIED

Error name
NMAAccessObjAccessDenied

Cause
None.

Solution
None.

3.16.17 3217
Hardware fault during Network Management Agent (NMA) access.

Error ID
FIM_E_NMA_ACCESS_HARDWARE_FAULT

Error name
NMAAccessHardwareFault

421
3 ERROR CODES

Cause
None.

Solution
None.

3.16.18 3218
Conflict with Network Management Agent (NMA) access type.

Error ID
FIM_E_NMA_ACCESS_TYPE_CONFLICT

Error name
NMAAccessTypeConflict

Cause
None.

Solution
None.

3.16.19 3219
Unspecified Network Management Agent (NMA) VcrList (VCRL) error.

Error ID
FIM_E_NMA_CRL_OTHER

Error name
NMACrlOther

Cause
None.

Solution
None.

3.16.20 3220
Invalid entry in Network Management Agent (NMA) VcrList (VCRL).

Error ID
FIM_E_NMA_CRL_INVALID_ENTRY

Error name
NMACrlInvalidEntry

422 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.21 3221
No VcrList (VCRL) entry found in Network Management Agent (NMA).

Error ID
FIM_E_NMA_CRL_NO_CRL_ENTRY

Error name
NMACrlNoCrlEntry

Cause
None.

Solution
None.

3.16.22 3222
Invalid Network Management Agent (NMA) VcrList (VCRL).

Error ID
FIM_E_NMA_CRL_INVALID_CRL

Error name
NMACrlInvalidCrl

Cause
None.

Solution
None.

3.16.23 3223
No VcrList (VCRL) in Network Management Agent (NMA) VcrList (VCRL).

Error ID
FIM_E_NMA_CRL_NO_CRL

Error name
NMACrlNoCrl

423
3 ERROR CODES

Cause
None.

Solution
None.

3.16.24 3224
Network Management Agent (NMA) VcrList (VCRL) write protected.

Error ID
FIM_E_NMA_CRL_WRITE_PROTECTED

Error name
NMACrlWriteProtected

Cause
None.

Solution
None.

3.16.25 3225
No entry found In Network Management Agent (NMA) VcrList (VCRL).

Error ID
FIM_E_NMA_CRL_NO_ENTRY_FOUND

Error name
NMACrlNoEntryFound

Cause
None.

Solution
None.

3.16.26 3226
Multiple Virtual Field Device (VFD) not supported.

Error ID
FIM_E_NMA_CRL_NO_MULT_VFD_SUPP

Error name
NMACrlNoMultVfdSupp

424 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.27 3227
Unspecified Network Management Agent (NMA) error.

Error ID
FIM_E_NMA_OTHER

Error name
NMAOther

Cause
None.

Solution
None.

3.16.28 3250
Remote error invalid state.

Error ID
FIM_E_SM_INVALID_STATE

Error name
SMInvalidState

Cause
None.

Solution
None.

3.16.29 3251
Remote error Physical Data (PD) Tag not match.

Error ID
FIM_E_SM_WRONG_PD_TAG

Error name
SMWrongPdTag

425
3 ERROR CODES

Cause
None.

Solution
None.

3.16.30 3252
Remote error device ID not match.

Error ID
FIM_E_SM_WRONG_DEVICE_ID

Error name
SMWrongDeviceId

Cause
None.

Solution
None.

3.16.31 3253
Remote error System Management Information Base (SMIB) object write failed.

Error ID
FIM_E_SM_WRITE_FAILED

Error name
SMWriteFailed

Cause
None.

Solution
None.

3.16.32 3254
Remote error starting System Management (SM) operation.

Error ID
FIM_E_SM_SM_NOT_TO_OP

Error name
SMNotToOp

426 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.16.33 3255
Data Link Layer (DLL) error insufficient resources.

Error ID
FIM_E_SM_DLL_NO_RESOURCE

Error name
SMDllNoResource

Cause
None.

Solution
None.

3.16.34 3256
Data Link Layer (DLL) error send queue full.

Error ID
FIM_E_SM_DLL_QUEUE_FULL

Error name
SMDllQueueFull

Cause
None.

Solution
None.

3.16.35 3257
Data Link Layer (DLL) error timeout.

Error ID
FIM_E_SM_DLL_TIMEOUT

Error name
SMDllTimeout

427
3 ERROR CODES

Cause
None.

Solution
None.

3.16.36 3258
Data Link Layer (DLL) error unspecified reason.

Error ID
FIM_E_SM_DLL_UNKNOWN

Error name
SMDllUnknown

3.16.37 3259
Service not supported.

Error ID
FIM_E_SM_SERV_NOT_SUPPORTED

Error name
SMServNotSupported

Cause
None.

Solution
None.

3.16.38 3260
Parameter invalid.

Error ID
FIM_E_SM_PARAM_IV

Error name
SMParamIv

Cause
None.

Solution
None.

428 www.honeywell.com
 3 ERROR CODES

3.16.39 3261
No response to SET_PD_TAG.

Error ID
FIM_E_SM_NR_TO_SET_PD_TAG

Error name
SMNrToSetPdTag

Cause
None.

Solution
None.

3.16.40 3262
No response to WHO_HAS_PD_TAG.

Error ID
FIM_E_SM_NR_TO_WHO_HAS_PD_TAG

Error name
SMNrToWhoHasPdTag

Cause
None.

Solution
None.

3.16.41 3263
No response to SET_ADDR.

Error ID
FIM_E_SM_NR_TO_SET_ADDR

Error name
SMNrToSetAddr

Cause
None.

Solution
None.

429
3 ERROR CODES

3.16.42 3264
No response to IDENTIFY.

Error ID
FIM_E_SM_NR_TO_IDENTIFY

Error name
SMNrToIdentify

Cause
None.

Solution
None.

3.16.43 3265
No response to ENABLE_SM_OP.

Error ID
FIM_E_SM_NR_TO_ENABLE_SM_OP

Error name
SMNrToEnableSMOp

Cause
None.

Solution
None.

3.16.44 3266
No response to CLEAR_ADDRESS.

Error ID
FIM_E_SM_NR_TO_CLEAR_ADDRESS

Error name
SMNrToClearAddress

Cause
None.

Solution
None.

430 www.honeywell.com
 3 ERROR CODES

3.16.45 3267
Multiple responses to WHO_HAS_PD_TAG.

Error ID
FIM_E_SM_MULTIPLE_TAGS

Error name
SMMultipleTags

Cause
None.

Solution
None.

3.16.46 3268
Non-Matching PD-TAG for WHO_HAS_TAG_PDU.

Error ID
FIM_E_SM_TAG_WHO_HAS_PD_TAG

Error name
SMTagWhoHasPdTag

Cause
None.

Solution
None.

3.16.47 3269
Non-Matching PD-TAG for IDENTIFY.

Error ID
FIM_E_SM_PD_TAG_IDENTIFY

Error name
SMPdTagIdentify

Cause
None.

Solution
None.

431
3 ERROR CODES

3.16.48 3270
Non-Matching DEV_ID for IDENTIFY.

Error ID
FIM_E_SM_DEV_ID_IDENTIFY

Error name
SMDevIdIdentify

Cause
None.

Solution
None.

3.16.49 3271
Configuration data false.

Error ID
FIM_E_SM_CONFIGURATION

Error name
SMConfiguration

Cause
None.

Solution
None.

3.16.50 3272
System Management (SM) is already configured.

Error ID
FIM_E_SM_ALREADY_CONFIGURED

Error name
SMAlreadyConfigured

Cause
None.

Solution
None.

432 www.honeywell.com
 3 ERROR CODES

3.16.51 3273
List has too many elements.

Error ID
FIM_E_SM_LIST_TO_LONG

Error name
SMListToLong

Cause
None.

Solution
None.

3.16.52 3274
Time master is activated.

Error ID
FIM_E_SM_ALREADY_STARTED

Error name
SMAlreadyStarted

Cause
None.

Solution
None.

3.16.53 3275
Time master is stopped.

Error ID
FIM_E_SM_ALREADY_STOPPED

Error name
SMAlreadyStopped

Cause
None.

Solution
None.

433
3 ERROR CODES

3.16.54 3276
Clock interval is not set.

Error ID
FIM_E_SM_TI_NOT_SET

Error name
SMTiNotSet

Cause
None.

Solution
None.

3.16.55 3277
Local System Management (SM) error occured.

Error ID
FIM_E_SM_LOCAL_ERROR

Error name
SMLocalError

Cause
None.

Solution
None.

3.16.56 3278
No System Management (SM) resources available.

Error ID
FIM_E_SM_NO_RESOURCE

Error name
SMNoResource

Cause
None.

Solution
None.

434 www.honeywell.com
 3 ERROR CODES

3.16.57 3279
Wong source address.

Error ID
FIM_E_SM_WRONG_ADDRESS

Error name
SMWrongAddress

Cause
None.

Solution
None.

3.16.58 3280
Encoding failed.

Error ID
FIM_E_SM_ENCODING

Error name
SMEncoding

Cause
None.

Solution
None.

3.16.59 3281
Wrong type of System Management (SM) Protocol Data Unit (PDU).

Error ID
FIM_E_SM_ILLEGAL_PDU

Error name
SMIllegalPDU

Cause
None.

Solution
None.

435
3 ERROR CODES

3.16.60 3282
Unspecified System Management (SM) error.

Error ID
FIM_E_SM_OTHER

Error name
SMOther

Cause
None.

Solution
None.

3.16.61 3290
Unspecified Protocol Data Unit (PDU) reject.

Error ID
FIM_E_REJ_RC0

Error name
REJRC0

Cause
None.

Solution
None.

3.16.62 3291
Invoke ID already exists.

Error ID
FIM_E_REJ_RC1

Error name
REJRC1

Cause
None.

Solution
None.

436 www.honeywell.com
 3 ERROR CODES

3.16.63 3292
Max services overflow.

Error ID
FIM_E_REJ_RC2

Error name
REJRC2

Cause
None.

Solution
None.

3.16.64 3293
Feature not supported on this connection.

Error ID
FIM_E_REJ_RC3

Error name
REJRC3

Cause
None.

Solution
None.

3.16.65 3294
Feature not supported, connectionless.

Error ID
FIM_E_REJ_RC4

Error name
REJRC4

Cause
None.

Solution
None.

437
3 ERROR CODES

3.16.66 3295
Protocol Data Unit (PDU) size exceeded maximum allowed.

Error ID
FIM_E_REJ_RC5

Error name
REJRC5

Cause
None.

Solution
None.

3.16.67 3296
User error on connectionless relation.

Error ID
FIM_E_REJ_RC6

Error name
REJRC6

Cause
None.

Solution
None.

438 www.honeywell.com
 3 ERROR CODES

3.17 Codes 3300 to 3365

Related topics
“3300” on page 440
“3301” on page 440
“3302” on page 440
“3303” on page 441
“3304” on page 441
“3305” on page 441
“3306” on page 442
“3310” on page 442
“3311” on page 442
“3312” on page 443
“3313” on page 443
“3318” on page 443
“3319” on page 444
“3321” on page 444
“3322” on page 444
“3323” on page 445
“3324” on page 445
“3325” on page 445
“3326” on page 446
“3327” on page 446
“3328” on page 446
“3329” on page 447
“3330” on page 447
“3332” on page 447
“3334” on page 448
“3335” on page 448
“3336” on page 448
“3337” on page 449
“3338” on page 449
“3340” on page 449
“3341” on page 450
“3342” on page 450
“3343” on page 450
“3344” on page 451
“3345” on page 451
“3346” on page 451
“3347” on page 452
“3348” on page 452
“3350” on page 452
“3351” on page 453
“3352” on page 453
“3353” on page 453
“3354” on page 454
“3355” on page 454

439
3 ERROR CODES

“3356” on page 454

“3357” on page 455
“3358” on page 455
“3359” on page 455
“3360” on page 456
“3361” on page 456
“3362” on page 456
“3363” on page 457
“3364” on page 457
“3365” on page 457

3.17.1 3300
Communication buffer not available.

Error ID
FIM_E_APP_NO_COMMBUFF

Error name
NoCommBuff

Cause
None.

Solution
None.

3.17.2 3301
Unable to set an event to send task.

Error ID
FIM_E_APP_SENDSEND_EV

Error name
SendSendEv

Cause
None.

Solution
None.

3.17.3 3302
Temporary device address range is full.

440 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_TEMPRANGE

Error name
TempRange

Cause
None.

Solution
None.

3.17.4 3303
Not in proper state for transition.

Error ID
FIM_E_APP_WRONG_STATE

Error name
WrongState

Cause
None.

Solution
None.

3.17.5 3304
FCI not ready.

Error ID
FIM_E_APP_FCI_DOWN

Error name
FciDown

Cause
None.

Solution
None.

3.17.6 3305
Both links must be inactive.

441
3 ERROR CODES

Error ID
FIM_E_APP_LINK_ACTIVE

Error name
LinkActive

Cause
None.

Solution
None.

3.17.7 3306
Read value before writing.

Error ID
FIM_E_APP_READ_FIRST

Error name
ReadFirst

Cause
None.

Solution
None.

3.17.8 3310
Invalid Virtual Field Device (VFD) number.

Error ID
FIM_E_APP_BAD_VFD_NUMBER

Error name
VFDNumber

Cause
None.

Solution
None.

3.17.9 3311
Device does not exist.

442 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_NON_EXISTENT_DEVICE

Error name
NonExistentDevice

Cause
None.

Solution
None.

3.17.10 3312
Device does not exist.

Error ID
FIM_E_APP_NON_EXISTENT_DEVICE

Error name
NonExistentDevice

Cause
None.

Solution
None.

3.17.11 3313
Cache completely used up.

Error ID
FIM_E_APP_CACHE_USED_UP

Error name
CacheUsedUp

Cause
None.

Solution
None.

3.17.12 3318
Invalid Command.

443
3 ERROR CODES

Error ID
FIM_E_APP_BAD_COMMAND

Error name
BadCommand

Cause
None.

Solution
None.

3.17.13 3319
Device configuration state error.

Error ID
FIM_E_APP_DEV_CNF_CONFLICT

Error name
DevCnfConflict

Cause
None.

Solution
None.

3.17.14 3321
Device address is already used.

Error ID
FIM_E_APP_DEV_ADDR_CONFLICT

Error name
DevAddrConflict

Cause
None.

Solution
None.

3.17.15 3322
Device tag is already used.

444 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_PDTAG_CONFLICT

Error name
DevTagConflict

Cause
None.

Solution
None.

3.17.16 3323
Device tag mismatch.

Error ID
FIM_E_APP_PDTAG_MISMATCH

Error name
PdTagMismatch

Cause
None.

Solution
None.

3.17.17 3324
Device address mismatch.

Error ID
FIM_E_APP_DEV_ADDR_MISMATCH

Error name
DevAddrMismatch

Cause
None.

Solution
None.

3.17.18 3325
Asynchronous operation is pending.

445
3 ERROR CODES

Error ID
FIM_E_APP_OPER_PENDING

Error name
OperPending

Cause
None.

Solution
None.

3.17.19 3326
Connection to device is not open.

Error ID
FIM_E_APP_NOCONN

Error name
NoConn

Cause
FIM is not able to open connection to the device. There can be any number of reasons for this.

Solution
Be sure you have the latest DD files for the device. Check and correct any related parameter errors. Call TAC, if
problem persists.

3.17.20 3327
Virtual Communication Relationship (VCR) limit exceeded.

Error ID
FIM_E_APP_NOVCR

Error name
NoVcr

Cause
None.

Solution
None.

3.17.21 3328
Invalid Virtual Communication Relationship (VCR) index.

446 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_BAD_VCR_IDX

Error name
BadVcrIdx

Cause
None.

Solution
None.

3.17.22 3329
Invalid segment number.

Error ID
FIM_E_APP_BAD_SEG_NUM

Error name
BadSegNum

Cause
None.

Solution
None.

3.17.23 3330
Request is not supported.

Error ID
FIM_E_APP_UNSUPP_REQ

Error name
UnsuppReq

Cause
None.

Solution
None.

3.17.24 3332
FIM application ran out of memory buffers.

447
3 ERROR CODES

Error ID
FIM_E_APP_NO_MEM_MAN_BUF

Error name
NoMemManBuf

Cause
This should not occur. This is an internal error that is the result of a bug in the FIM application.

Solution
None.

3.17.25 3334
No type description. FIM could not obtain OD record for the vendor-specific type from device.

Error ID
FIM_E_APP_NO_TYPE_DESC

Error name
Notypedesc

Cause
Problem may be with the DD file.

Solution
Check that the DD file contains type descriptor and retry.

3.17.26 3335
Bad domain packet.

Error ID
FIM_E_APP_BAD_DOMAIN_PACKET

Error name
BadDomPack

Cause
None.

Solution
None.

3.17.27 3336
Domain packet out of order.

448 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_DOM_PACKET_ORDER

Error name
DomPackOrder

Cause
None.

Solution
None.

3.17.28 3337
Another domain operation is in progress.

Error ID
FIM_E_APP_DOM_OPER_CONFLICT

Error name
DomOperConfl

Cause
None.

Solution
None.

3.17.29 3338
Domain download failed.

Error ID
FIM_E_APP_DOM_DLD_FAILED

Error name
DomDldFailed

Cause
None.

Solution
None.

3.17.30 3340
Communication timeout.

449
3 ERROR CODES

Error ID
FIM_E_APP_TIMEOUT

Error name
Timeout

Cause
None.

Solution
None.

3.17.31 3341
Invalid device configuration state.

Error ID
FIM_E_APP_CONFIG_STATE

Error name
ConfigState

Cause
None.

Solution
None.

3.17.32 3342
Invalid Virtual Communication Relationship (VCR) state.

Error ID
FIM_E_APP_BAD_VCR_STATE

Error name
BadVcrState

Cause
None.

Solution
None.

3.17.33 3343
View implementation error.

450 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_VIEW_ERR

Error name
ViewErr

Cause
None.

Solution
None.

3.17.34 3344
Invalid Link Active Scheduler (LAS) size.

Error ID
FIM_E_APP_LAS_SIZE

Error name
LasSize

Cause
None.

Solution
None.

3.17.35 3345
Agent configuration error.

Error ID
FIM_E_APP_AGENT_CONFIG

Error name
AgentConfig

Cause
None.

Solution
None.

3.17.36 3346
Invalid agent type.

451
3 ERROR CODES

Error ID
FIM_E_APP_AGENT_TYPE

Error name
AgentType

Cause
None.

Solution
None.

3.17.37 3347
Invalid agent Virtual Communication Relationship (VCR).

Error ID
FIM_E_APP_AGENT_VCR

Error name
AgentVcr

Cause
None.

Solution
None.

3.17.38 3348
Device is off-net.

Error ID
FIM_E_DEV_OFFNET

Error name
DevOffnet

Cause
None.

Solution
None.

3.17.39 3350
Access rights are not granted.

452 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_GRANTDENY

Error name
GrantDeny

Cause
None.

Solution
None.

3.17.40 3351
NVS log is not initialized.

Error ID
FIM_E_NVSLOG_INIT

Error name
NvsLogInit

Cause
None.

Solution
None.

3.17.41 3352
NVS log is full.

Error ID
FIM_E_NVSLOG_FULL

Error name
NvsLogFull

Cause
None.

Solution
None.

3.17.42 3353
NVS log is corrupt.

453
3 ERROR CODES

Error ID
FIM_E_NVSLOG_CORRUPT

Error name
NvsLogCorrupt

Cause
None.

Solution
None.

3.17.43 3354
Invalid block number.

Error ID
FIM_E_APP_FBNUM

Error name
FbNum

Cause
None.

Solution
None.

3.17.44 3355
Invalid PARDEF header.

Error ID
FIM_E_APP_PARDEF_HEAD

Error name
PardefHead

Cause
None.

Solution
None.

3.17.45 3356
No PARDEF descriptor available.

454 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_APP_NO_PARDEF

Error name
NoPardef

Cause
None.

Solution
None.

3.17.46 3357
Insufficient Memory avaiable

Error ID
SIMFFD_E_INSUFF_MEM_AVAILABLE

Error name
INSUFF_MEM_AVAILABLE

Cause
None.

Solution
None.

3.17.47 3358
Maximum available user memory exceeded

Error ID
SIMFFD_E_MAX_AVAILUSER_MEM_EXCEEDED

Error name
MAX_AVAILUSER_MEM_EXCEEDED

Cause
None.

Solution
None.

3.17.48 3359
Memory limit exceeded

455
3 ERROR CODES

Error ID
SIMFFD_E_MEM_LIMIT_EXCEEDED_WARN

Error name
MEM_LIMIT_EXCEEDED_WARN

Cause
None.

Solution
None.

3.17.49 3360
Internal Memory Manager error

Error ID
SIMFFD_E_INTERNAL_MEM_MNGR_ERROR

Error name
INTERNAL_MEM_MNGR_ERROR

Cause
None.

Solution
None.

3.17.50 3361
Memory Allocation Failed

Error ID
SIMFFD_E_MEM_ALLOC_FAILED

Error name
MEM_ALLOC_FAILED

Cause
None.

Solution
None.

3.17.51 3362
Insufficient Config Memory

456 www.honeywell.com
 3 ERROR CODES

Error ID
SIMFFD_E_INSUFF_CONFIG_MEM

Error name
INSUFF_CONFIG_MEM

Cause
None.

Solution
None.

3.17.52 3363
Auxiliary Memory Allocation Failed

Error ID
SIMFFD_E_AUXMEM_ALLOC_NOT_FOUND

Error name
AUXMEM_ALLOC_NOT_FOUND

Cause
None.

Solution
None.

3.17.53 3364
No Memory Buffers available

Error ID
SIMFFD_E_NOMEMBUFFS_AVAIL

Error name
SIMFFD_E_NOMEMBUFFS_AVAIL

Cause
None.

Solution
None.

3.17.54 3365
Maximum number of device Instances Exceeded

457
3 ERROR CODES

Error ID
SIMFFD_E_DEV_INSTANCE_LIM_EXCEEDED

Error name
DEV_INSTANCE_LIM_EXCEEDED

Cause
None.

Solution
None.

458 www.honeywell.com
 3 ERROR CODES

3.18 Codes 3600 to 3699

Related topics
“3600 - FIM_E_APP_AIL_COMM_TIMEOUT” on page 461
“3600 - SFC_SUCCESS” on page 461
“3601 - FIM_E_APP_ILLEGAL_CS_ADDR” on page 462
“3601 - SFC_FAILURE” on page 462
“3602 - FIM_E_APP_NO_UCD_AVAILABLE” on page 462
“3602 - SFC_OTHER” on page 463
“3603 - FIM_E_APP_CS_ADDR_OCCUPIED” on page 463
“3603 - SFC_INVALID_ARGUMENT” on page 463
“3604 - FIM_E_APP_UNEXPECTED_CONFIG_ERR” on page 464
“3604 - SFC_INVALID_OBJ_ID” on page 464
“3605 - FIM_E_APP_PARAMETER_NOT_IN_CACHE” on page 464
“3605 - SFC_INVALID_SERVICE” on page 465
“3606 - FIM_E_APP_DEV_POOL_FULL” on page 465
“3606 - SFC_INVALID_ATTRIBUTE” on page 465
“3607 - FIM_E_APP_ALLOC_TX_BUF_FAIL” on page 466
“3607 - SFC_INVALID_ELEMENT_INDEX” on page 466
“3608 - FIM_E_APP_NULL_DEV_PTR” on page 466
“3608 - SFC_READ_ONLY_ATTRIBUTE” on page 467
“3609 - FIM_E_APP_TAG_CHANGE_NOT_UCD” on page 467
“3609 - SFC_VALUE_OUT_OF_RANGE” on page 467
“3610 - FIM_E_APP_MFB_NOT_LOADED” on page 468
“3610 - SFC_INNAPROPRIATE_PROCESS_MODE” on page 468
“3611 - FIM_E_APP_MODBUS_MAX_TABLE_SIZE” on page 468
“3611 - SFC_INCOMPATIBLE_MODE” on page 469
“3612 - FIM_E_APP_NULL_PAR_PTR” on page 469
“3612 - SFC_INVALID_VALUE” on page 469
“3613 - FIM_E_APP_STORE_NOT_ALLOWED” on page 470
“3613 - SFC_INTERNAL_ERROR” on page 470
“3614 - FIM_E_APP_NO_REQ_ID” on page 470
“3614 - SFC_INVALID_SIZE” on page 471
“3615 - FIM_E_APP_FMWUPG_INPROG” on page 471
“3615 - SFC_INCOMPATIBLE_ATTRIBUTE” on page 471
“3616” on page 472
“3617” on page 472
“3618” on page 472
“3619” on page 473
“3620” on page 473
“3621” on page 473
“3622” on page 474
“3623” on page 474
“3624” on page 474
“3625” on page 475
“3626” on page 475
“3627” on page 475

459
3 ERROR CODES

“3628” on page 476

“3629” on page 476
“3630” on page 476
“3631” on page 477
“3632” on page 477
“3633” on page 477
“3634” on page 478
“3635” on page 478
“3636” on page 478
“3637” on page 479
“3638” on page 479
“3639” on page 479
“3640” on page 480
“3641” on page 480
“3642” on page 480
“3643” on page 481
“3644” on page 481
“3645” on page 481
“3646” on page 482
“3647” on page 482
“3648” on page 482
“3649” on page 483
“3650” on page 483
“3651” on page 483
“3652” on page 484
“3653” on page 484
“3654” on page 484
“3655” on page 485
“3656” on page 485
“3657” on page 485
“3658” on page 486
“3659” on page 486
“3660” on page 486
“3661” on page 487
“3662” on page 487
“3663” on page 487
“3664” on page 488
“3665” on page 488
“3666” on page 488
“3667” on page 489
“3668” on page 489
“3669” on page 489
“3670” on page 490
“3671” on page 490
“3672” on page 490
“3673” on page 491
“3674” on page 491
“3675” on page 491

460 www.honeywell.com
 3 ERROR CODES

“3676” on page 492

“3677” on page 492
“3678” on page 492
“3679” on page 493
“3680” on page 493
“3681” on page 493
“3682” on page 494
“3683” on page 494
“3684” on page 494
“3685” on page 495
“3686” on page 495
“3687” on page 495
“3688” on page 496
“3689” on page 496
“3690” on page 496
“3691” on page 497
“3692” on page 497
“3693” on page 497
“3694” on page 498
“3695” on page 498
“3696” on page 498
“3697” on page 499
“3698” on page 499
“3699” on page 499

3.18.1 3600 - FIM_E_APP_AIL_COMM_TIMEOUT

<systemdefined>: Communication with the device has timed out

Error ID
FIM_E_APP_AIL_COMM_TIMEOUT

Error name
AilCommTimeout

Cause
None.

Solution
None.

3.18.2 3600 - SFC_SUCCESS

Success

Error ID
SFC_SUCCESS

461
3 ERROR CODES

Error name
None.

Cause
None.

Solution
None.

3.18.3 3601 - FIM_E_APP_ILLEGAL_CS_ADDR

<systemdefined>: Illegal control system address

Error ID
FIM_E_APP_ILLEGAL_CS_ADDR

Error name
IllegalCsAddr

Cause
None.

Solution
None.

3.18.4 3601 - SFC_FAILURE

Operation failed

Error ID
SFC_FAILURE

Error name
None.

Cause
None.

Solution
None.

3.18.5 3602 - FIM_E_APP_NO_UCD_AVAILABLE

<systemdefined>: Too many uncommissioned devices

Error ID
FIM_E_APP_NO_UCD_AVAILABLE

462 www.honeywell.com
 3 ERROR CODES

Error name
NoUcdAvailable

Cause
None.

Solution
None.

3.18.6 3602 - SFC_OTHER

Another error

Error ID
SFC_OTHER

Error name
None.

Cause
None.

Solution
None.

3.18.7 3603 - FIM_E_APP_CS_ADDR_OCCUPIED

<systemdefined>: Control system address already occupied

Error ID
FIM_E_APP_CS_ADDR_OCCUPIED

Error name
CsAddrOccupied

Cause
None.

Solution
None.

3.18.8 3603 - SFC_INVALID_ARGUMENT

An invalid argument.

Error ID
SFC_INVALID_ARGUMENT

463
3 ERROR CODES

Error name
None.

Cause
None.

Solution
None.

3.18.9 3604 - FIM_E_APP_UNEXPECTED_CONFIG_ERR

<systemdefined>: Unexpected error during configuration

Error ID
FIM_E_APP_UNEXPECTED_CONFIG_ERR

Error name
UnexpectedConfigErr

Cause
None.

Solution
None.

3.18.10 3604 - SFC_INVALID_OBJ_ID

An invalid object ID.

Error ID
SFC_INVALID_OBJ_ID

Cause
None.

Solution
None.

3.18.11 3605 - FIM_E_APP_PARAMETER_NOT_IN_CACHE

<systemdefined>: Parameter is not in the cache

Error ID
FIM_E_APP_PARAMETER_NOT_IN_CACHE

Error name
ParameterNotInCache

464 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.12 3605 - SFC_INVALID_SERVICE

Unsupported or illegal service.

Error ID
SFC_INVALID_SERVICE

Error name
None.

Cause
None.

Solution
None.

3.18.13 3606 - FIM_E_APP_DEV_POOL_FULL

<systemdefined>: Device pool is full

Error ID
FIM_E_APP_DEV_POOL_FULL

Error name
DevPoolFull

Cause
None.

Solution
None.

3.18.14 3606 - SFC_INVALID_ATTRIBUTE

An invalid attribute index.

Error ID
SFC_INVALID_ATTRIBUTE

Error name
None.

465
3 ERROR CODES

Cause
None.

Solution
None.

3.18.15 3607 - FIM_E_APP_ALLOC_TX_BUF_FAIL

<systemdefined>: Cannot allocate transmit buffer

Error ID
FIM_E_APP_ALLOC_TX_BUF_FAIL

Error name
AllocTxBufFail

Cause
None.

Solution
None.

3.18.16 3607 - SFC_INVALID_ELEMENT_INDEX

An invalid element index.

Error ID
SFC_INVALID_ELEMENT_INDEX

Error name
None.

Cause
None.

Solution
None.

3.18.17 3608 - FIM_E_APP_NULL_DEV_PTR

<systemdefined>: Unexpected NULL device pointer

Error ID
FIM_E_APP_NULL_DEV_PTR

Error name
NullDevPtr

466 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.18 3608 - SFC_READ_ONLY_ATTRIBUTE

Read-only attribute

Error ID
SFC_READ_ONLY_ATTRIBUTE

Error name
None.

Cause
None.

Solution
None.

3.18.19 3609 - FIM_E_APP_TAG_CHANGE_NOT_UCD

<systemdefined>: Tag change is only allowed on uncommissioned devices

Error ID
FIM_E_APP_TAG_CHANGE_NOT_UCD

Error name
TagChangeNotUcd

Cause
None.

Solution
None.

3.18.20 3609 - SFC_VALUE_OUT_OF_RANGE

The value is out of range.

Error ID
SFC_VALUE_OUT_OF_RANGE

Error name
None.

467
3 ERROR CODES

Cause
None.

Solution
None.

3.18.21 3610 - FIM_E_APP_MFB_NOT_LOADED

<systemdefined>: Module must be loaded to online before this operation is allowed

Error ID
FIM_E_APP_MFB_NOT_LOADED

Error name
MfbNotLoaded

Cause
None.

Solution
None.

3.18.22 3610 - SFC_INNAPROPRIATE_PROCESS_MODE

The process mode is inappropriate.

Error ID
SFC_INNAPROPRIATE_PROCESS_MODE

Error name
None.

Cause
None.

Solution
None.

3.18.23 3611 - FIM_E_APP_MODBUS_MAX_TABLE_SIZE

<systemdefined>: A maximum of 500 entries is allowed per Modbus address table

Error ID
FIM_E_APP_MODBUS_MAX_TABLE_SIZE

Error name
ModbusMaxTableSize

468 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.24 3611 - SFC_INCOMPATIBLE_MODE

The mode or context is incompatible.

Error ID
SFC_INCOMPATIBLE_MODE

Error name
None.

Cause
None.

Solution
None.

3.18.25 3612 - FIM_E_APP_NULL_PAR_PTR

<systemdefined>: Unexpected NULL parameter pointer

Error ID
FIM_E_APP_NULL_PAR_PTR

Error name
NullParPtr

Cause
None.

Solution
None.

3.18.26 3612 - SFC_INVALID_VALUE

The value is invalid.

Error ID
SFC_INVALID_VALUE

Error name
None.

469
3 ERROR CODES

Cause
None.

Solution
None.

3.18.27 3613 - FIM_E_APP_STORE_NOT_ALLOWED

<systemdefined>: This parameter can only be changed in the Offline configuration and loaded to the device

Error ID
FIM_E_APP_STORE_NOT_ALLOWED

Error name
StoreNotAllowed

Cause
None.

Solution
None.

3.18.28 3613 - SFC_INTERNAL_ERROR

Device internal error.

Error ID
SFC_INTERNAL_ERROR

Error name
None.

Cause
None.

Solution
None.

3.18.29 3614 - FIM_E_APP_NO_REQ_ID

<systemdefined>: No Request ID is available

Error ID
FIM_E_APP_NO_REQ_ID

Error name
NoReqId

470 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.30 3614 - SFC_INVALID_SIZE

The size is invalid.

Error ID
SFC_INVALID_SIZE

Error name
None.

Cause
None.

Solution
None.

3.18.31 3615 - FIM_E_APP_FMWUPG_INPROG

<systemdefined>: Cannot commission device during firmware download

Error ID
FIM_E_APP_FMWUPG_INPROG

Error name
FmwUpgInProg

Cause
None.

Solution
None.

3.18.32 3615 - SFC_INCOMPATIBLE_ATTRIBUTE

The attribute is incompatible.

Error ID
SFC_INCOMPATIBLE_ATTRIBUTE

Error name
None.

471
3 ERROR CODES

Cause
None.

Solution
None.

3.18.33 3616
The method identifier is invalid.

Error ID
SFC_INVALID_METHOD

Error name
None.

Cause
None.

Solution
None.

3.18.34 3617
Object state conflict

Error ID
SFC_OBJECT_STATE_CONFLICT

Error name
None.

Cause
None.

Solution
None.

3.18.35 3618
The content is inconsistent.

Error ID
INCONSISTENT_CONTENT

Error name
None.

472 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.36 3619
The parameter is invalid.

Error ID
SFC_INVALID_PARAMETER

Error name
None.

Cause
None.

Solution
None.

3.18.37 3620
Access is denied for the object.

Error ID
SFC_OBJECT_ACCESS_DENIED

Error name
None.

Cause
None.

Solution
None.

3.18.38 3621
Data type mismatch

Error ID
SFC_TYPE_MISSMATCH

Error name
None.

473
3 ERROR CODES

Cause
None.

Solution
None.

3.18.39 3622
Device hardware condition

Error ID
SFC_DEVICE_HARDWARE_CONDITION

Error name
None.

Cause
None.

Solution
None.

3.18.40 3623
Device sensor condition

Error ID
SFC_DEVICE_SENSOR_CONDITION

Error name
None.

Cause
None.

Solution
None.

3.18.41 3624
Device software condition

Error ID
SFC_DEVICE_SOFTWARE_CONDITION

Error name
None.

474 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.42 3625
Field operation condition

Error ID
SFC_FIELD_OPERATION_CONDITION

Error name
None.

Cause
None.

Solution
None.

3.18.43 3626
Configuration mismatch

Error ID
SFC_CONFIGURATION_MISMATCH

Error name
None.

Cause
None.

Solution
None.

3.18.44 3627
Device resources are insufficient.

Error ID
SFC_INSUFFICIENT_DEVICE_RESOURCES

Error name
None.

475
3 ERROR CODES

Cause
None.

Solution
None.

3.18.45 3628
Value is limited by the device.

Error ID
SFC_VALUE_LIMITED

Error name
None.

Cause
None.

Solution
None.

3.18.46 3629
Data modified warning

Error ID
SFC_DATA_WARNING

Error name
None.

Cause
None.

Solution
None.

3.18.47 3630
An invalid function reference.

Error ID
SFC_INALID_FUNCTION_REFERENCE

Error name
None.

476 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.48 3631
A function process error.

Error ID
SFC_FUNCTION_PROCESS_ERROR

Error name
None.

Cause
None.

Solution
None.

3.18.49 3632
Successful with a warning

Error ID
SFC_WARNING

Error name
None.

Cause
None.

Solution
None.

3.18.50 3633
Write-only attribute

Error ID
SFC_WRITE_ONLY_ATTRIBUTE

Error name
None.

477
3 ERROR CODES

Cause
None.

Solution
None.

3.18.51 3634
Method operation is accepted.

Error ID
SFC_OPERATION_ACCEPTED

Error name
None.

Cause
None.

Solution
None.

3.18.52 3635
The block size is invalid.

Error ID
SFC_INVALID_BLOCK_SIZE

Error name
None.

Cause
None.

Solution
None.

3.18.53 3636
The download size is invalid.

Error ID
SFC_INVALID_DOWNLOAD_SIZE

Error name
None.

478 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.54 3637
An unexpected method sequence.

Error ID
SFC_UNEXPECTED_METH_SEQUENCE

Error name
None.

Cause
None.

Solution
None.

3.18.55 3638
A timing violation.

Error ID
SFC_TIMING_VIOLATION

Error name
None.

Cause
None.

Solution
None.

3.18.56 3639
Operation is incomplete.

Error ID
SFC_OPERATION_INCOMPLETE

Error name
None.

479
3 ERROR CODES

Cause
None.

Solution
None.

3.18.57 3640
An invalid data.

Error ID
SFC_INVALID_DATA

Error name
None.

Cause
None.

Solution
None.

3.18.58 3641
Data sequence error.

Error ID
SFC_DATA_SEQUENCE_ERROR

Error name
None.

Cause
None.

Solution
None.

3.18.59 3642
Operation is stopped.

Error ID
SFC_OPERATION_ABORTED

Error name
None.

480 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.60 3643
The block number is invalid.

Error ID
SFC_INVALID_BLOCK_NUMBER

Error name
None.

Cause
None.

Solution
None.

3.18.61 3644
A block data error.

Error ID
SFC_BLOCK_DATA_ERROR

Error name
None.

Cause
None.

Solution
None.

3.18.62 3645
The block is not downloaded.

Error ID
SFC_BLOCK_NOT_DOWNLOAD

Error name
None.

481
3 ERROR CODES

Cause
None.

Solution
None.

3.18.63 3646
ISA100 standard error 46

Error ID
ISA_E_SFC_STANDARD_46

Error name
None.

Cause
None.

Solution
None.

3.18.64 3647
ISA100 standard error 47

Error ID
ISA_E_SFC_STANDARD_47

Error name
None.

Cause
None.

Solution
None.

3.18.65 3648
ISA100 standard error 48

Error ID
ISA_E_SFC_STANDARD_48

Error name
None.

482 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.66 3649
ISA100 standard error 49

Error ID
ISA_E_SFC_STANDARD_49

Error name
None.

Cause
None.

Solution
None.

3.18.67 3650
ISA100 standard error 50

Error ID
ISA_E_SFC_STANDARD_50

Error name
None.

Cause
None.

Solution
None.

3.18.68 3651
ISA100 standard error 51

Error ID
ISA_E_SFC_STANDARD_51

Error name
None.

483
3 ERROR CODES

Cause
None.

Solution
None.

3.18.69 3652
ISA100 standard error 52

Error ID
ISA_E_SFC_STANDARD_52

Error name
None.

Cause
None.

Solution
None.

3.18.70 3653
ISA100 standard error 53

Error ID
ISA_E_SFC_STANDARD_53

Error name
None.

Cause
None.

Solution
None.

3.18.71 3654
ISA100 standard error 54

Error ID
ISA_E_SFC_STANDARD_54

Error name
None.

484 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.72 3655
ISA100 standard error 55

Error ID
ISA_E_SFC_STANDARD_55

Error name
None.

Cause
None.

Solution
None.

3.18.73 3656
ISA100 standard error 56

Error ID
ISA_E_SFC_STANDARD_56

Error name
None.

Cause
None.

Solution
None.

3.18.74 3657
ISA100 standard error 57

Error ID
ISA_E_SFC_STANDARD_57

Error name
None.

485
3 ERROR CODES

Cause
None.

Solution
None.

3.18.75 3658
ISA100 standard error 58

Error ID
ISA_E_SFC_STANDARD_58

Error name
None.

Cause
None.

Solution
None.

3.18.76 3659
ISA100 standard error 59

Error ID
ISA_E_SFC_STANDARD_59

Error name
None.

Cause
None.

Solution
None.

3.18.77 3660
ISA100 standard error 60

Error ID
ISA_E_SFC_STANDARD_60

Error name
None.

486 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.78 3661
ISA100 standard error 61

Error ID
ISA_E_SFC_STANDARD_61

Error name
None.

Cause
None.

Solution
None.

3.18.79 3662
ISA100 standard error 62

Error ID
ISA_E_SFC_STANDARD_62

Error name
None.

Cause
None.

Solution
None.

3.18.80 3663
ISA100 standard error 63

Error ID
ISA_E_SFC_STANDARD_63

Error name
None.

487
3 ERROR CODES

Cause
None.

Solution
None.

3.18.81 3664
ISA100 standard error 64

Error ID
ISA_E_SFC_STANDARD_64

Error name
None.

Cause
None.

Solution
None.

3.18.82 3665
ISA100 standard error 65

Error ID
ISA_E_SFC_STANDARD_65

Error name
None.

Cause
None.

Solution
None.

3.18.83 3666
ISA100 standard error 66

Error ID
ISA_E_SFC_STANDARD_66

Error name
None.

488 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.84 3667
ISA100 standard error 67

Error ID
ISA_E_SFC_STANDARD_67

Error name
None.

Cause
None.

Solution
None.

3.18.85 3668
ISA100 standard error 68

Error ID
ISA_E_SFC_STANDARD_68

Error name
None.

Cause
None.

Solution
None.

3.18.86 3669
ISA100 standard error 69

Error ID
ISA_E_SFC_STANDARD_69

Error name
None.

489
3 ERROR CODES

Cause
None.

Solution
None.

3.18.87 3670
ISA100 standard error 70

Error ID
ISA_E_SFC_STANDARD_70

Error name
None.

Cause
None.

Solution
None.

3.18.88 3671
ISA100 standard error 71

Error ID
ISA_E_SFC_STANDARD_71

Error name
None.

Cause
None.

Solution
None.

3.18.89 3672
ISA100 standard error 72

Error ID
ISA_E_SFC_STANDARD_72

Error name
None.

490 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.90 3673
ISA100 standard error 73

Error ID
ISA_E_SFC_STANDARD_73

Error name
None.

Cause
None.

Solution
None.

3.18.91 3674
ISA100 standard error 74

Error ID
ISA_E_SFC_STANDARD_74

Error name
None.

Cause
None.

Solution
None.

3.18.92 3675
ISA100 standard error 75

Error ID
ISA_E_SFC_STANDARD_75

Error name
None.

491
3 ERROR CODES

Cause
None.

Solution
None.

3.18.93 3676
ISA100 standard error 76

Error ID
ISA_E_SFC_STANDARD_76

Error name
None.

Cause
None.

Solution
None.

3.18.94 3677
ISA100 standard error 77

Error ID
ISA_E_SFC_STANDARD_77

Error name
None.

Cause
None.

Solution
None.

3.18.95 3678
ISA100 standard error 78

Error ID
ISA_E_SFC_STANDARD_78

Error name
None.

492 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.96 3679
ISA100 standard error 79

Error ID
ISA_E_SFC_STANDARD_79

Error name
None.

Cause
None.

Solution
None.

3.18.97 3680
ISA100 standard error 80

Error ID
ISA_E_SFC_STANDARD_80

Error name
None.

Cause
None.

Solution
None.

3.18.98 3681
ISA100 standard error 81

Error ID
ISA_E_SFC_STANDARD_81

Error name
None.

493
3 ERROR CODES

Cause
None.

Solution
None.

3.18.99 3682
ISA100 standard error 82

Error ID
ISA_E_SFC_STANDARD_82

Error name
None.

Cause
None.

Solution
None.

3.18.100 3683
ISA100 standard error 83

Error ID
ISA_E_SFC_STANDARD_83

Error name
None.

Cause
None.

Solution
None.

3.18.101 3684
ISA100 standard error 84

Error ID
ISA_E_SFC_STANDARD_84

Error name
None.

494 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.102 3685
ISA100 standard error 85

Error ID
ISA_E_SFC_STANDARD_85

Error name
None.

Cause
None.

Solution
None.

3.18.103 3686
ISA100 standard error 86

Error ID
ISA_E_SFC_STANDARD_86

Error name
None.

Cause
None.

Solution
None.

3.18.104 3687
ISA100 standard error 87

Error ID
ISA_E_SFC_STANDARD_87

Error name
None.

495
3 ERROR CODES

Cause
None.

Solution
None.

3.18.105 3688
ISA100 standard error 88

Error ID
ISA_E_SFC_STANDARD_88

Error name
None.

Cause
None.

Solution
None.

3.18.106 3689
ISA100 standard error 89

Error ID
ISA_E_SFC_STANDARD_89

Error name
None.

Cause
None.

Solution
None.

3.18.107 3690
ISA100 standard error 90

Error ID
ISA_E_SFC_STANDARD_90

Error name
None.

496 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.108 3691
ISA100 standard error 91

Error ID
ISA_E_SFC_STANDARD_91

Error name
None.

Cause
None.

Solution
None.

3.18.109 3692
ISA100 standard error 92

Error ID
ISA_E_SFC_STANDARD_92

Error name
None.

Cause
None.

Solution
None.

3.18.110 3693
ISA100 standard error 93

Error ID
ISA_E_SFC_STANDARD_93

Error name
None.

497
3 ERROR CODES

Cause
None.

Solution
None.

3.18.111 3694
ISA100 standard error 94

Error ID
ISA_E_SFC_STANDARD_94

Error name
None.

Cause
None.

Solution
None.

3.18.112 3695
ISA100 standard error 95

Error ID
ISA_E_SFC_STANDARD_95

Error name
None.

Cause
None.

Solution
None.

3.18.113 3696
ISA100 standard error 96

Error ID
ISA_E_SFC_STANDARD_96

Error name
None.

498 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.18.114 3697
ISA100 standard error 97

Error ID
ISA_E_SFC_STANDARD_97

Error name
None.

Cause
None.

Solution
None.

3.18.115 3698
ISA100 standard error 98

Error ID
ISA_E_SFC_STANDARD_98

Error name
None.

Cause
None.

Solution
None.

3.18.116 3699
ISA100 standard error 99

Error ID
ISA_E_SFC_STANDARD_99

Error name
None.

499
3 ERROR CODES

Cause
None.

Solution
None.

500 www.honeywell.com
 3 ERROR CODES

3.19 Codes 3700 to 3827

Related topics
“3700 - FIM_E_AIL_OK” on page 504
“3700 - ISA_E_SFC_STANDARD_100” on page 504
“3701 - FIM_E_AIL_INVALID_ARG” on page 504
“3701 - ISA_E_SFC_STANDARD_101” on page 505
“3702 - FIM_E_AIL_INVALID_OID” on page 505
“3702 - ISA_E_SFC_STANDARD_102” on page 505
“3703 - FIM_E_AIL_UNSUPP_SVC” on page 506
“3703 - ISA_E_SFC_STANDARD_103” on page 506
“3704 - FIM_E_AIL_INVALID_PARAM” on page 506
“3704 - ISA_E_SFC_STANDARD_104” on page 507
“3705 - FIM_E_AIL_INVALID_ELEM” on page 507
“3705 - ISA_E_SFC_STANDARD_105” on page 507
“3706 - FIM_E_AIL_READ_ONLY” on page 508
“3706 - ISA_E_SFC_STANDARD_1006” on page 508
“3707 - FIM_E_AIL_OUT_OF_RANGE” on page 508
“3707 - ISA_E_SFC_STANDARD_107” on page 509
“3708 - FIM_E_AIL_WRONG_MODE” on page 509
“3708 - ISA_E_SFC_STANDARD_108” on page 509
“3709 - FIM_E_AIL_ILLEGAL_VALUE” on page 510
“3709 - ISA_E_SFC_STANDARD_109” on page 510
“3710” on page 510
“3711” on page 511
“3712” on page 511
“3713” on page 511
“3714” on page 512
“3715” on page 512
“3716” on page 512
“3717” on page 513
“3718” on page 513
“3719” on page 513
“3720” on page 514
“3721” on page 514
“3722” on page 514
“3723” on page 515
“3724” on page 515
“3725” on page 515
“3726” on page 516
“3727” on page 516
“3728” on page 516
“3729” on page 517
“3730” on page 517
“3731” on page 517
“3732” on page 518
“3733” on page 518

501
3 ERROR CODES

“3734” on page 518

“3735” on page 519
“3736” on page 519
“3737” on page 519
“3738” on page 520
“3739” on page 520
“3740” on page 520
“3741” on page 521
“3742” on page 521
“3743” on page 521
“3744” on page 522
“3745” on page 522
“3746” on page 522
“3747” on page 523
“3748” on page 523
“3749” on page 523
“3750” on page 524
“3751” on page 524
“3752” on page 524
“3753” on page 525
“3754” on page 525
“3755” on page 525
“3756” on page 526
“3757” on page 526
“3758” on page 526
“3759” on page 527
“3760” on page 527
“3761” on page 527
“3762” on page 528
“3763” on page 528
“3764” on page 528
“3765” on page 529
“3766” on page 529
“3767” on page 529
“3768” on page 530
“3769” on page 530
“3770” on page 530
“3771” on page 531
“3772” on page 531
“3773” on page 531
“3774” on page 532
“3775” on page 532
“3776” on page 532
“3777” on page 533
“3778” on page 533
“3779” on page 533
“3780” on page 534
“3781” on page 534

502 www.honeywell.com
 3 ERROR CODES

“3782” on page 534

“3783” on page 535
“3784” on page 535
“3785” on page 535
“3786” on page 536
“3787” on page 536
“3788” on page 536
“3789” on page 537
“3790” on page 537
“3791” on page 537
“3792” on page 538
“3793” on page 538
“3794” on page 538
“3795” on page 539
“3796” on page 539
“3797” on page 539
“3798” on page 540
“3799” on page 540
“3800” on page 540
“3801” on page 541
“3802” on page 541
“3803” on page 541
“3804” on page 542
“3805” on page 542
“3806” on page 542
“3807” on page 543
“3808” on page 543
“3809” on page 543
“3810” on page 544
“3811” on page 544
“3812” on page 544
“3813” on page 545
“3814” on page 545
“3815” on page 545
“3816” on page 546
“3817” on page 546
“3818” on page 546
“3819” on page 547
“3820” on page 547
“3821” on page 547
“3822” on page 548
“3823” on page 548
“3824” on page 548
“3825” on page 549
“3826” on page 549
“3827” on page 549

503
3 ERROR CODES

3.19.1 3700 - FIM_E_AIL_OK

<systemdefined>::Success

Error ID
FIM_E_AIL_OK

Error name
AilOk

Cause
None.

Solution
None.

3.19.2 3700 - ISA_E_SFC_STANDARD_100

ISA100 standard error 100

Error ID
ISA_E_SFC_STANDARD_100

Error name
None.

Cause
None.

Solution
None.

3.19.3 3701 - FIM_E_AIL_INVALID_ARG

<systemdefined>::Invalid argument to a service call

Error ID
FIM_E_AIL_INVALID_ARG

Error name
AilInvalidArg

Cause
None.

Solution
None.

504 www.honeywell.com
 3 ERROR CODES

3.19.4 3701 - ISA_E_SFC_STANDARD_101

ISA100 standard error 101

Error ID
ISA_E_SFC_STANDARD_101

Error name
None.

Cause
None.

Solution
None.

3.19.5 3702 - FIM_E_AIL_INVALID_OID

<systemdefined>::Invalid object ID

Error ID
FIM_E_AIL_INVALID_OID

Error name
AilInvalidOid

Cause
None.

Solution
None.

3.19.6 3702 - ISA_E_SFC_STANDARD_102

ISA100 standard error 102

Error ID
ISA_E_SFC_STANDARD_102

Error name
None.

Cause
None.

Solution
None.

505
3 ERROR CODES

3.19.7 3703 - FIM_E_AIL_UNSUPP_SVC

<systemdefined>: Unsupported or illegal service

Error ID
FIM_E_AIL_UNSUPP_SVC

Error name
AilUnsuppSvc

Cause
None.

Solution
None.

3.19.8 3703 - ISA_E_SFC_STANDARD_103

ISA100 standard error 103

Error ID
ISA_E_SFC_STANDARD_103

Error name
None.

Cause
None.

Solution
None.

3.19.9 3704 - FIM_E_AIL_INVALID_PARAM

<systemdefined>: Invalid parameter number

Error ID
FIM_E_AIL_INVALID_PARAM

Error name
AilInvalidParam

Cause
None.

Solution
None.

506 www.honeywell.com
 3 ERROR CODES

3.19.10 3704 - ISA_E_SFC_STANDARD_104

ISA100 standard error 104

Error ID
ISA_E_SFC_STANDARD_104

Error name
None.

Cause
None.

Solution
None.

3.19.11 3705 - FIM_E_AIL_INVALID_ELEM

<systemdefined>: Invalid array or structure element

Error ID
FIM_E_AIL_INVALID_ELEM

Error name
AilInvalidElem

Cause
None.

Solution
None.

3.19.12 3705 - ISA_E_SFC_STANDARD_105

ISA100 standard error 105

Error ID
ISA_E_SFC_STANDARD_105

Error name
None.

Cause
None.

Solution
None.

507
3 ERROR CODES

3.19.13 3706 - FIM_E_AIL_READ_ONLY

<systemdefined>: Parameter is read only

Error ID
FIM_E_AIL_READ_ONLY

Error name
AilReadOnly

Cause
None.

Solution
None.

3.19.14 3706 - ISA_E_SFC_STANDARD_1006

ISA100 standard error 106

Error ID
ISA_E_SFC_STANDARD_1006

Error name
None.

Cause
None.

Solution
None.

3.19.15 3707 - FIM_E_AIL_OUT_OF_RANGE

<systemdefined>: Value is out of range

Error ID
FIM_E_AIL_OUT_OF_RANGE

Error name
AilOutOfRange

Cause
None.

Solution
None.

508 www.honeywell.com
 3 ERROR CODES

3.19.16 3707 - ISA_E_SFC_STANDARD_107

ISA100 standard error 107

Error ID
ISA_E_SFC_STANDARD_107

Error name
None.

Cause
None.

Solution
None.

3.19.17 3708 - FIM_E_AIL_WRONG_MODE

<systemdefined>: Wrong mode for request

Error ID
FIM_E_AIL_WRONG_MODE

Error name
AilWrongMode

Cause
None.

Solution
None.

3.19.18 3708 - ISA_E_SFC_STANDARD_108

ISA100 standard error 108

Error ID
ISA_E_SFC_STANDARD_108

Error name
None.

Cause
None.

Solution
None.

509
3 ERROR CODES

3.19.19 3709 - FIM_E_AIL_ILLEGAL_VALUE

<systemdefined>: Value is not acceptable

Error ID
FIM_E_AIL_ILLEGAL_VALUE

Error name
AilIllegalValue

Cause
None.

Solution
None.

3.19.20 3709 - ISA_E_SFC_STANDARD_109

ISA100 standard error 109

Error ID
ISA_E_SFC_STANDARD_109

Error name
None.

Cause
None.

Solution
None.

3.19.21 3710
ISA100 standard error 110

Error ID
ISA_E_SFC_STANDARD_110

Error name
None.

Cause
None.

Solution
None.

510 www.honeywell.com
 3 ERROR CODES

3.19.22 3711
ISA100 standard error 111

Error ID
ISA_E_SFC_STANDARD_111

Error name
None.

Cause
None.

Solution
None.

3.19.23 3712
ISA100 standard error 112

Error ID
ISA_E_SFC_STANDARD_112

Error name
None.

Cause
None.

Solution
None.

3.19.24 3713
ISA100 standard error 113

Error ID
ISA_E_SFC_STANDARD_113

Error name
None.

Cause
None.

Solution
None.

511
3 ERROR CODES

3.19.25 3714
ISA100 standard error 114

Error ID
ISA_E_SFC_STANDARD_114

Error name
None.

Cause
None.

Solution
None.

3.19.26 3715
ISA100 standard error 115

Error ID
ISA_E_SFC_STANDARD_115

Error name
None.

Cause
None.

Solution
None.

3.19.27 3716
ISA100 standard error 116

Error ID
ISA_E_SFC_STANDARD_116

Error name
None.

Cause
None.

Solution
None.

512 www.honeywell.com
 3 ERROR CODES

3.19.28 3717
ISA100 standard error 117

Error ID
ISA_E_SFC_STANDARD_117

Error name
None.

Cause
None.

Solution
None.

3.19.29 3718
ISA100 standard error 118

Error ID
ISA_E_SFC_STANDARD_118

Error name
None.

Cause
None.

Solution
None.

3.19.30 3719
ISA100 standard error 119

Error ID
ISA_E_SFC_STANDARD_119

Error name
None.

Cause
None.

Solution
None.

513
3 ERROR CODES

3.19.31 3720
ISA100 standard error 120

Error ID
ISA_E_SFC_STANDARD_120

Error name
None.

Cause
None.

Solution
None.

3.19.32 3721
ISA100 standard error 121

Error ID
ISA_E_SFC_STANDARD_121

Error name
None.

Cause
None.

Solution
None.

3.19.33 3722
ISA100 standard error 122

Error ID
ISA_E_SFC_STANDARD_122

Error name
None.

Cause
None.

Solution
None.

514 www.honeywell.com
 3 ERROR CODES

3.19.34 3723
ISA100 standard error 123

Error ID
ISA_E_SFC_STANDARD_123

Error name
None.

Cause
None.

Solution
None.

3.19.35 3724
ISA100 standard error 124

Error ID
ISA_E_SFC_STANDARD_124

Error name
None.

Cause
None.

Solution
None.

3.19.36 3725
ISA100 standard error 125

Error ID
ISA_E_SFC_STANDARD_125

Error name
None.

Cause
None.

Solution
None.

515
3 ERROR CODES

3.19.37 3726
ISA100 standard error 126

Error ID
ISA_E_SFC_STANDARD_126

Error name
None.

Cause
None.

Solution
None.

3.19.38 3727
ISA100 standard error 127

Error ID
ISA_E_SFC_STANDARD_127

Error name
None.

Cause
None.

Solution
None.

3.19.39 3728
ISA vendor specific error 128

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_128

Error name
None.

Cause
None.

Solution
None.

516 www.honeywell.com
 3 ERROR CODES

3.19.40 3729
ISA vendor specific error 129

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_129

Error name
None.

Cause
None.

Solution
None.

3.19.41 3730
ISA vendor specific error 130

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_130

Error name
None.

Cause
None.

Solution
None.

3.19.42 3731
ISA vendor specific error 131

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_131

Error name
None.

Cause
None.

Solution
None.

517
3 ERROR CODES

3.19.43 3732
ISA vendor specific error 132

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_132

Error name
None.

Cause
None.

Solution
None.

3.19.44 3733
ISA vendor specific error 133

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_133

Error name
None.

Cause
None.

Solution
None.

3.19.45 3734
ISA vendor specific error 134

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_134

Error name
None.

Cause
None.

Solution
None.

518 www.honeywell.com
 3 ERROR CODES

3.19.46 3735
ISA vendor specific error 135

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_135

Error name
None.

Cause
None.

Solution
None.

3.19.47 3736
ISA vendor specific error 136

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_136

Error name
None.

Cause
None.

Solution
None.

3.19.48 3737
ISA vendor specific error 137

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_137

Error name
None.

Cause
None.

Solution
None.

519
3 ERROR CODES

3.19.49 3738
ISA vendor specific error 138

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_138

Error name
None.

Cause
None.

Solution
None.

3.19.50 3739
ISA vendor specific error 139

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_139

Error name
None.

Cause
None.

Solution
None.

3.19.51 3740
ISA vendor specific error 140

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_140

Error name
None.

Cause
None.

Solution
None.

520 www.honeywell.com
 3 ERROR CODES

3.19.52 3741
ISA vendor specific error 141

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_141

Error name
None.

Cause
None.

Solution
None.

3.19.53 3742
ISA vendor specific error 142

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_142

Error name
None.

Cause
None.

Solution
None.

3.19.54 3743
ISA vendor specific error 143

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_143

Error name
None.

Cause
None.

Solution
None.

521
3 ERROR CODES

3.19.55 3744
ISA vendor specific error 144

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_144

Error name
None.

Cause
None.

Solution
None.

3.19.56 3745
ISA vendor specific error 145

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_145

Error name
None.

Cause
None.

Solution
None.

3.19.57 3746
ISA vendor specific error 146

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_146

Error name
None.

Cause
None.

Solution
None.

522 www.honeywell.com
 3 ERROR CODES

3.19.58 3747
ISA vendor specific error 147

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_147

Error name
None.

Cause
None.

Solution
None.

3.19.59 3748
ISA vendor specific error 148

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_148

Error name
None.

Cause
None.

Solution
None.

3.19.60 3749
ISA vendor specific error 149

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_149

Error name
None.

Cause
None.

Solution
None.

523
3 ERROR CODES

3.19.61 3750
ISA vendor specific error 150

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_150

Error name
None.

Cause
None.

Solution
None.

3.19.62 3751
ISA vendor specific error 151

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_151

Error name
None.

Cause
None.

Solution
None.

3.19.63 3752
ISA vendor specific error 152

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_152

Error name
None.

Cause
None.

Solution
None.

524 www.honeywell.com
 3 ERROR CODES

3.19.64 3753
ISA vendor specific error 153

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_153

Error name
None.

Cause
None.

Solution
None.

3.19.65 3754
ISA vendor specific error 154

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_154

Error name
None.

Cause
None.

Solution
None.

3.19.66 3755
ISA vendor specific error 155

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_155

Error name
None.

Cause
None.

Solution
None.

525
3 ERROR CODES

3.19.67 3756
ISA vendor specific error 156

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_156

Error name
None.

Cause
None.

Solution
None.

3.19.68 3757
ISA vendor specific error 157

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_157

Error name
None.

Cause
None.

Solution
None.

3.19.69 3758
ISA vendor specific error 158

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_158

Error name
None.

Cause
None.

Solution
None.

526 www.honeywell.com
 3 ERROR CODES

3.19.70 3759
ISA vendor specific error 159

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_159

Error name
None.

Cause
None.

Solution
None.

3.19.71 3760
ISA vendor specific error 160

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_160

Error name
None.

Cause
None.

Solution
None.

3.19.72 3761
ISA vendor specific error 161

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_161

Error name
None.

Cause
None.

Solution
None.

527
3 ERROR CODES

3.19.73 3762
ISA vendor specific error 162

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_162

Error name
None.

Cause
None.

Solution
None.

3.19.74 3763
ISA vendor specific error 163

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_163

Error name
None.

Cause
None.

Solution
None.

3.19.75 3764
ISA vendor specific error 164

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_164

Error name
None.

Cause
None.

Solution
None.

528 www.honeywell.com
 3 ERROR CODES

3.19.76 3765
ISA vendor specific error 165

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_165

Error name
None.

Cause
None.

Solution
None.

3.19.77 3766
ISA vendor specific error 166

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_166

Error name
None.

Cause
None.

Solution
None.

3.19.78 3767
ISA vendor specific error 167

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_167

Error name
None.

Cause
None.

Solution
None.

529
3 ERROR CODES

3.19.79 3768
ISA vendor specific error 168

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_168

Error name
None.

Cause
None.

Solution
None.

3.19.80 3769
ISA vendor specific error 169

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_169

Error name
None.

Cause
None.

Solution
None.

3.19.81 3770
ISA vendor specific error 170

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_170

Error name
None.

Cause
None.

Solution
None.

530 www.honeywell.com
 3 ERROR CODES

3.19.82 3771
ISA vendor specific error 171

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_171

Error name
None.

Cause
None.

Solution
None.

3.19.83 3772
ISA vendor specific error 172

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_172

Error name
None.

Cause
None.

Solution
None.

3.19.84 3773
ISA vendor specific error 173

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_173

Error name
None.

Cause
None.

Solution
None.

531
3 ERROR CODES

3.19.85 3774
ISA vendor specific error 174

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_174

Error name
None.

Cause
None.

Solution
None.

3.19.86 3775
ISA vendor specific error 175

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_175

Error name
None.

Cause
None.

Solution
None.

3.19.87 3776
ISA vendor specific error 176

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_176

Error name
None.

Cause
None.

Solution
None.

532 www.honeywell.com
 3 ERROR CODES

3.19.88 3777
ISA vendor specific error 177

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_177

Error name
None.

Cause
None.

Solution
None.

3.19.89 3778
ISA vendor specific error 178

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_178

Error name
None.

Cause
None.

Solution
None.

3.19.90 3779
ISA vendor specific error 179

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_179

Error name
None.

Cause
None.

Solution
None.

533
3 ERROR CODES

3.19.91 3780
ISA vendor specific error 180

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_180

Error name
None.

Cause
None.

Solution
None.

3.19.92 3781
ISA vendor specific error 181

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_181

Error name
None.

Cause
None.

Solution
None.

3.19.93 3782
ISA vendor specific error 182

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_182

Error name
None.

Cause
None.

Solution
None.

534 www.honeywell.com
 3 ERROR CODES

3.19.94 3783
ISA vendor specific error 183

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_183

Error name
None.

Cause
None.

Solution
None.

3.19.95 3784
ISA vendor specific error 184

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_184

Error name
None.

Cause
None.

Solution
None.

3.19.96 3785
ISA vendor specific error 185

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_185

Error name
None.

Cause
None.

Solution
None.

535
3 ERROR CODES

3.19.97 3786
ISA vendor specific error 186

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_186

Error name
None.

Cause
None.

Solution
None.

3.19.98 3787
ISA vendor specific error 187

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_187

Error name
None.

Cause
None.

Solution
None.

3.19.99 3788
ISA vendor specific error 188

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_188

Error name
None.

Cause
None.

Solution
None.

536 www.honeywell.com
 3 ERROR CODES

3.19.100 3789
ISA vendor specific error 189

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_189

Error name
None.

Cause
None.

Solution
None.

3.19.101 3790
ISA vendor specific error 190

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_190

Error name
None.

Cause
None.

Solution
None.

3.19.102 3791
ISA vendor specific error 191

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_191

Error name
None.

Cause
None.

Solution
None.

537
3 ERROR CODES

3.19.103 3792
ISA vendor specific error 192

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_192

Error name
None.

Cause
None.

Solution
None.

3.19.104 3793
ISA vendor specific error 193

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_193

Error name
None.

Cause
None.

Solution
None.

3.19.105 3794
ISA vendor specific error 194

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_194

Error name
None.

Cause
None.

Solution
None.

538 www.honeywell.com
 3 ERROR CODES

3.19.106 3795
ISA vendor specific error 195

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_195

Error name
None.

Cause
None.

Solution
None.

3.19.107 3796
ISA vendor specific error 196

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_196

Error name
None.

Cause
None.

Solution
None.

3.19.108 3797
ISA vendor specific error 171

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_197

Error name
None.

Cause
None.

Solution
None.

539
3 ERROR CODES

3.19.109 3798
ISA vendor specific error 198

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_198

Error name
None.

Cause
None.

Solution
None.

3.19.110 3799
ISA vendor specific error 199

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_199

Error name
None.

Cause
None.

Solution
None.

3.19.111 3800
ISA vendor specific error 200

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_200

Error name
None.

Cause
None.

Solution
None.

540 www.honeywell.com
 3 ERROR CODES

3.19.112 3801
ISA vendor specific error 201

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_201

Error name
None.

Cause
None.

Solution
None.

3.19.113 3802
ISA vendor specific error 202

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_202

Error name
None.

Cause
None.

Solution
None.

3.19.114 3803
ISA vendor specific error 203

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_203

Error name
None.

Cause
None.

Solution
None.

541
3 ERROR CODES

3.19.115 3804
ISA vendor specific error 204

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_204

Error name
None.

Cause
None.

Solution
None.

3.19.116 3805
ISA vendor specific error 205

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_205

Error name
None.

Cause
None.

Solution
None.

3.19.117 3806
ISA vendor specific error 206

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_206

Error name
None.

Cause
None.

Solution
None.

542 www.honeywell.com
 3 ERROR CODES

3.19.118 3807
ISA vendor specific error 207

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_207

Error name
None.

Cause
None.

Solution
None.

3.19.119 3808
ISA vendor specific error 208

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_208

Error name
None.

Cause
None.

Solution
None.

3.19.120 3809
ISA vendor specific error 209

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_209

Error name
None.

Cause
None.

Solution
None.

543
3 ERROR CODES

3.19.121 3810
ISA vendor specific error 210

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_210

Error name
None.

Cause
None.

Solution
None.

3.19.122 3811
ISA vendor specific error 211

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_211

Error name
None.

Cause
None.

Solution
None.

3.19.123 3812
ISA vendor specific error 212

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_212

Error name
None.

Cause
None.

Solution
None.

544 www.honeywell.com
 3 ERROR CODES

3.19.124 3813
ISA vendor specific error 213

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_213

Error name
None.

Cause
None.

Solution
None.

3.19.125 3814
ISA vendor specific error 214

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_214

Error name
None.

Cause
None.

Solution
None.

3.19.126 3815
ISA vendor specific error 215

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_215

Error name
None.

Cause
None.

Solution
None.

545
3 ERROR CODES

3.19.127 3816
ISA vendor specific error 216

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_216

Error name
None.

Cause
None.

Solution
None.

3.19.128 3817
ISA vendor specific error 217

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_217

Error name
None.

Cause
None.

Solution
None.

3.19.129 3818
ISA vendor specific error 218

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_218

Error name
None.

Cause
None.

Solution
None.

546 www.honeywell.com
 3 ERROR CODES

3.19.130 3819
ISA vendor specific error 219

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_219

Error name
None.

Cause
None.

Solution
None.

3.19.131 3820
ISA vendor specific error 220

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_220

Error name
None.

Cause
None.

Solution
None.

3.19.132 3821
ISA vendor specific error 221

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_221

Error name
None.

Cause
None.

Solution
None.

547
3 ERROR CODES

3.19.133 3822
ISA vendor specific error 222

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_222

Error name
None.

Cause
None.

Solution
None.

3.19.134 3823
ISA vendor specific error 223

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_223

Error name
None.

Cause
None.

Solution
None.

3.19.135 3824
ISA vendor specific error 224

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_224

Error name
None.

Cause
None.

Solution
None.

548 www.honeywell.com
 3 ERROR CODES

3.19.136 3825
ISA vendor specific error 225

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_225

Error name
None.

Cause
None.

Solution
None.

3.19.137 3826
ISA vendor specific error 226

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_226

Error name
None.

Cause
None.

Solution
None.

3.19.138 3827
ISA vendor specific error 227

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_227

Error name
None.

Cause
None.

Solution
None.

549
3 ERROR CODES

3.20 Codes 3500 to 3521

Related topics
“3500” on page 550
“3501” on page 551
“3502” on page 551
“3503” on page 551
“3504” on page 552
“3510” on page 552
“3510” on page 552
“3511 - FIM_E_NVS_FILE_OPEN_FAIL” on page 553
“3511 - INVALID_DATA_LEN” on page 553
“3512 - FIM_E_NVS_INVALID_VERSION” on page 553
“3512 - INVALID_DATA_TYPE” on page 554
“3513 - FIM_E_NVS_WRITE_ERROR” on page 554
“3513 - INVALID_CS_ADDR” on page 554
“3514 - FIM_E_NVS_SEEK_ERROR” on page 555
“3514 - INVALID_HANDLE” on page 555
“3515 - FIM_E_NVS_READ_ERROR” on page 555
“3515 - MFB_NOT_LOADED” on page 556
“3516 - FIM_E_NVS_PARDEF_NULL” on page 556
“3516 - RDN_PARTIPADDRESS_NOT_CONFIG” on page 556
“3517 - FIM_E_NVS_PARDEF_ENTRY_NULL” on page 557
“3517 - RDN_BECOMEPRI_NOT_KEYED” on page 557
“3518 - FIM_E_NVS_PARDEF_DIR_ERROR” on page 557
“3518 - APP_INIT_ONLINE_DATA_INPROG” on page 558
“3519 - FIM_E_NVS_PARDEF_FLUSH_ERROR” on page 558
“3519 - RDN_SYNC_DATA_TOO_LARGE” on page 558
“3520” on page 559
“3521” on page 559

3.20.1 3500
Flash programmer parameter error.

Error ID
FIM_E_FLASH_PAR

Error name
FlashPar

Cause
None.

Solution
None.

550 www.honeywell.com
 3 ERROR CODES

3.20.2 3501
Flash was not erased.

Error ID
FIM_E_FLASH_NOT_ERASED

Error name
FlashNotErased

Cause
None.

Solution
None.

3.20.3 3502
Flash erasing error.

Error ID
FIM_E_FLASH_ERASE

Error name
FlashErase

Cause
None.

Solution
None.

3.20.4 3503
Flash programming error.

Error ID
FIM_E_FLASH_BURN

Error name
FlashBurn

Cause
None.

Solution
None.

551
3 ERROR CODES

3.20.5 3504
Flash verifying error.

Error ID
FIM_E_FLASH_VERIFY

Error name
FlashVerify

Cause
None.

Solution
None.

3.20.6 3510
<systemdefined>: NVS has not yet been initialized

Error ID
FIM_E_NVS_NOT_INITIALIZED

Error name
NvsNotInitialized

Cause
None.

Solution
None.

3.20.7 3510
Failed to convert to ISA100 handle.

Error ID
FAIL_CONVERT_HANDLE

Error name
None.

Cause
None.

Solution
None.

552 www.honeywell.com
 3 ERROR CODES

3.20.8 3511 - FIM_E_NVS_FILE_OPEN_FAIL

<systemdefined>: Unable to open NVS file

Error ID
FIM_E_NVS_FILE_OPEN_FAIL

Error name
NvsFileOpenFail

Cause
None.

Solution
None.

3.20.9 3511 - INVALID_DATA_LEN

The data length is invalid.

Error ID
INVALID_DATA_LEN

Error name
None.

Cause
None.

Solution
None.

3.20.10 3512 - FIM_E_NVS_INVALID_VERSION

<systemdefined>: NVS has invalid version identification number

Error ID
FIM_E_NVS_INVALID_VERSION

Error name
NvsInvalidVersion

Cause
None.

Solution
None.

553
3 ERROR CODES

3.20.11 3512 - INVALID_DATA_TYPE

The data type is invalid.

Error ID
INVALID_DATA_TYPE

Error name
None.

Cause
None.

Solution
None.

3.20.12 3513 - FIM_E_NVS_WRITE_ERROR

<systemdefined>: An error occurred while writing to NVS

Error ID
FIM_E_NVS_WRITE_ERROR

Error name
NvsWriteError

Cause
None.

Solution
None.

3.20.13 3513 - INVALID_CS_ADDR

The control system address is invalid.

Error ID
INVALID_CS_ADDR

Error name
None.

Cause
None.

Solution
None.

554 www.honeywell.com
 3 ERROR CODES

3.20.14 3514 - FIM_E_NVS_SEEK_ERROR

<systemdefined>: An error occurred while seeking NVS

Error ID
FIM_E_NVS_SEEK_ERROR

Error name
NvsSeekError

Cause
None.

Solution
None.

3.20.15 3514 - INVALID_HANDLE

The handle is invalid

Error ID
INVALID_HANDLE

Error name
None.

Cause
None.

Solution
None.

3.20.16 3515 - FIM_E_NVS_READ_ERROR

<systemdefined>: An error occurred while reading from NVS

Error ID
FIM_E_NVS_READ_ERROR

Error name
NvsReadError

Cause
None.

Solution
None.

555
3 ERROR CODES

3.20.17 3515 - MFB_NOT_LOADED

Module function block is not loaded.

Error ID
MFB_NOT_LOADED

Error name
None.

Cause
None.

Solution
None.

3.20.18 3516 - FIM_E_NVS_PARDEF_NULL

<systemdefined>: Illegal attempt to save NULL or invalid parameter definition

Error ID
FIM_E_NVS_PARDEF_NULL

Error name
NvsPardefNull

Cause
None.

Solution
None.

3.20.19 3516 - RDN_PARTIPADDRESS_NOT_CONFIG

Cannot configure redundant because partner IP address is not configured.

Error ID
RDN_PARTIPADDRESS_NOT_CONFIG

Error name
None.

Cause
None.

Solution
None.

556 www.honeywell.com
 3 ERROR CODES

3.20.20 3517 - FIM_E_NVS_PARDEF_ENTRY_NULL

<systemdefined>: Illegal entry while saving parameter definition

Error ID
FIM_E_NVS_PARDEF_ENTRY_NULL

Error name
NvsPardefEntryNull

Cause
None.

Solution
None.

3.20.21 3517 - RDN_BECOMEPRI_NOT_KEYED

Unable to become primary because a copy of the primary security key is not available. You must manually
reconfigure it.

Error ID
RDN_BECOMEPRI_NOT_KEYED

Error name
None.

Cause
None.

Solution
None.

3.20.22 3518 - FIM_E_NVS_PARDEF_DIR_ERROR

<systemdefined>: Unable to open parameter definition directory

Error ID
FIM_E_NVS_PARDEF_DIR_ERROR

Error name
NvsPardefDirError

Cause
None.

557
3 ERROR CODES

Solution
None.

3.20.23 3518 - APP_INIT_ONLINE_DATA_INPROG

Gateway is performing online data initialization for the device.

Error ID
APP_INIT_ONLINE_DATA_INPROG

Error name
None.

Cause
None.

Solution
None.

3.20.24 3519 - FIM_E_NVS_PARDEF_FLUSH_ERROR

<systemdefined>: Unable to flush parameter definition directory

Error ID
FIM_E_NVS_PARDEF_FLUSH_ERROR

Error name
NvsPardefFlushError

Cause
None.

Solution
None.

3.20.25 3519 - RDN_SYNC_DATA_TOO_LARGE

Synchronization the data is too large for the redundancy transport.

Error ID
RDN_SYNC_DATA_TOO_LARGE

Error name
None.

Cause
None.

558 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.20.26 3520
The requested operation is incomplete.

Error ID
OPERATION_INCOMPLETE

Error name
None.

Cause
None.

Solution
None.

3.20.27 3521
The data is successfully restored from NVS but it is incomplete or invalid.

Error ID
NVS_RESTORED_DATA_INVALID

Error name
None.

Cause
None.

Solution
None.

559
3 ERROR CODES

3.21 Codes 3828 to 3899

3.21.1 3828 - FIM_E_AIL_VENDOR_SPEC_128

<systemdefined>: Honeywell specific error code 128

Error ID
FIM_E_AIL_VENDOR_SPEC_128

Error name
AilHoneywellSpecific128

Cause
None.

Solution
None.

3.21.2 3828 - ISA_E_SFC_VENDOR_SPECIFIC_228

ISA vendor specific error 228

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_228

Error name
None.

Cause
None.

Solution
None.

3.21.3 3829 - FIM_E_AIL_VENDOR_SPEC_129

<systemdefined>: Honeywell specific error code 129

Error ID
FIM_E_AIL_VENDOR_SPEC_129

Error name
AilHoneywellSpecific129

Cause
None.

560 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.4 3829 - ISA_E_SFC_VENDOR_SPECIFIC_229

ISA vendor specific error 229

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_229

Error name
None.

Cause
None.

Solution
None.

3.21.5 3830 - FIM_E_AIL_VENDOR_SPEC_130

<systemdefined>: Honeywell specific error code 130

Error ID
FIM_E_AIL_VENDOR_SPEC_130

Error name
AilHoneywellSpecific130

Cause
None.

Solution
None.

3.21.6 3830 - ISA_E_SFC_VENDOR_SPECIFIC_230

ISA vendor specific error 230

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_230

Error name
None.

Cause
None.

561
3 ERROR CODES

Solution
None.

3.21.7 3831 - FIM_E_AIL_VENDOR_SPEC_131

<systemdefined>: Honeywell specific error code 131

Error ID
FIM_E_AIL_VENDOR_SPEC_131

Error name
AilHoneywellSpecific131

Cause
None.

Solution
None.

3.21.8 3831 - ISA_E_SFC_VENDOR_SPECIFIC_231

ISA vendor specific error 231

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_231

Error name
None.

Cause
None.

Solution
None.

3.21.9 3832 - FIM_E_AIL_VENDOR_SPEC_132

<systemdefined>: Honeywell specific error code 132

Error ID
FIM_E_AIL_VENDOR_SPEC_132

Error name
AilHoneywellSpecific132

Cause
None.

562 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.10 3832 - ISA_E_SFC_VENDOR_SPECIFIC_232

ISA vendor specific error 232

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_232

Error name
None.

Cause
None.

Solution
None.

3.21.11 3833 - FIM_E_AIL_VENDOR_SPEC_133

<systemdefined>: Honeywell specific error code 133

Error ID
FIM_E_AIL_VENDOR_SPEC_133

Error name
AilHoneywellSpecific133

Cause
None.

Solution
None.

3.21.12 3833 - ISA_E_SFC_VENDOR_SPECIFIC_233

ISA vendor specific error 233

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_233

Error name
None.

Cause
None.

563
3 ERROR CODES

Solution
None.

3.21.13 3834 - FIM_E_AIL_VENDOR_SPEC_134

<systemdefined>: Honeywell specific error code 134

Error ID
FIM_E_AIL_VENDOR_SPEC_134

Error name
AilHoneywellSpecific134

Cause
None.

Solution
None.

3.21.14 3834 - ISA_E_SFC_VENDOR_SPECIFIC_234

ISA vendor specific error 234

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_234

Error name
None.

Cause
None.

Solution
None.

3.21.15 3835 - FIM_E_AIL_VENDOR_SPEC_135

<systemdefined>: Honeywell specific error code 135

Error ID
FIM_E_AIL_VENDOR_SPEC_135

Error name
AilHoneywellSpecific135

Cause
None.

564 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.16 3835 - ISA_E_SFC_VENDOR_SPECIFIC_235

ISA vendor specific error 235

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_235

Error name
None.

Cause
None.

Solution
None.

3.21.17 3836 - FIM_E_AIL_VENDOR_SPEC_136

<systemdefined>: Honeywell specific error code 136

Error ID
FIM_E_AIL_VENDOR_SPEC_136

Error name
AilHoneywellSpecific136

Cause
None.

Solution
None.

3.21.18 3836 - ISA_E_SFC_VENDOR_SPECIFIC_236

ISA vendor specific error 236

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_236

Error name
None.

Cause
None.

565
3 ERROR CODES

Solution
None.

3.21.19 3837 - FIM_E_AIL_VENDOR_SPEC_137

<systemdefined>: Honeywell specific error code 137

Error ID
FIM_E_AIL_VENDOR_SPEC_137

Error name
AilHoneywellSpecific137

Cause
None.

Solution
None.

3.21.20 3837 - ISA_E_SFC_VENDOR_SPECIFIC_237

ISA vendor specific error 237

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_237

Error name
None.

Cause
None.

Solution
None.

3.21.21 3838 - FIM_E_AIL_VENDOR_SPEC_138

<systemdefined>: Honeywell specific error code 138

Error ID
FIM_E_AIL_VENDOR_SPEC_138

Error name
AilHoneywellSpecific138

Cause
None.

566 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.22 3838 - ISA_E_SFC_VENDOR_SPECIFIC_238

ISA vendor specific error 238

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_238

Error name
None.

Cause
None.

Solution
None.

3.21.23 3839 - FIM_E_AIL_VENDOR_SPEC_139

<systemdefined>: Honeywell specific error code 139

Error ID
FIM_E_AIL_VENDOR_SPEC_139

Error name
AilHoneywellSpecific139

Cause
None.

Solution
None.

3.21.24 3839 - ISA_E_SFC_VENDOR_SPECIFIC_239

ISA vendor specific error 239

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_239

Error name
None.

Cause
None.

567
3 ERROR CODES

Solution
None.

3.21.25 3840 - FIM_E_AIL_VENDOR_SPEC_140

<systemdefined>: Honeywell specific error code 140

Error ID
FIM_E_AIL_VENDOR_SPEC_140

Error name
AilHoneywellSpecific140

Cause
None.

Solution
None.

3.21.26 3840 - ISA_E_SFC_VENDOR_SPECIFIC_240

ISA vendor specific error 240

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_240

Error name
None.

Cause
None.

Solution
None.

3.21.27 3841 - FIM_E_AIL_VENDOR_SPEC_141

<systemdefined>: Honeywell specific error code 141

Error ID
FIM_E_AIL_VENDOR_SPEC_141

Error name
AilHoneywellSpecific141

Cause
None.

568 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.28 3841 - ISA_E_SFC_VENDOR_SPECIFIC_241

ISA vendor specific error 241

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_241

Error name
None.

Cause
None.

Solution
None.

3.21.29 3842 - FIM_E_AIL_VENDOR_SPEC_142

<systemdefined>: Honeywell specific error code 142

Error ID
FIM_E_AIL_VENDOR_SPEC_142

Error name
AilHoneywellSpecific142

Cause
None.

Solution
None.

3.21.30 3842 - ISA_E_SFC_VENDOR_SPECIFIC_242

ISA vendor specific error 242

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_242

Error name
None.

Cause
None.

569
3 ERROR CODES

Solution
None.

3.21.31 3843 - FIM_E_AIL_VENDOR_SPEC_143

<systemdefined>: Honeywell specific error code 143

Error ID
FIM_E_AIL_VENDOR_SPEC_143

Error name
AilHoneywellSpecific143

Cause
None.

Solution
None.

3.21.32 3843 - ISA_E_SFC_VENDOR_SPECIFIC_243

ISA vendor specific error 243

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_243

Error name
None.

Cause
None.

Solution
None.

3.21.33 3844 - FIM_E_AIL_VENDOR_SPEC_144

<systemdefined>: Honeywell specific error code 144

Error ID
FIM_E_AIL_VENDOR_SPEC_144

Error name
AilHoneywellSpecific144

Cause
None.

570 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.34 3844 - ISA_E_SFC_VENDOR_SPECIFIC_244

ISA vendor specific error 244

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_244

Error name
None.

Cause
None.

Solution
None.

3.21.35 3845 - FIM_E_AIL_VENDOR_SPEC_145

<systemdefined>: Honeywell specific error code 145

Error ID
FIM_E_AIL_VENDOR_SPEC_145

Error name
AilHoneywellSpecific145

Cause
None.

Solution
None.

3.21.36 3845 - ISA_E_SFC_VENDOR_SPECIFIC_245

ISA vendor specific error 245

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_245

Error name
None.

Cause
None.

571
3 ERROR CODES

Solution
None.

3.21.37 3846 - FIM_E_AIL_VENDOR_SPEC_146

<systemdefined>: Honeywell specific error code 146

Error ID
FIM_E_AIL_VENDOR_SPEC_146

Error name
AilHoneywellSpecific146

Cause
None.

Solution
None.

3.21.38 3846 - ISA_E_SFC_VENDOR_SPECIFIC_246

ISA vendor specific error 246

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_246

Error name
None.

Cause
None.

Solution
None.

3.21.39 3847 - FIM_E_AIL_VENDOR_SPEC_147

<systemdefined>: Honeywell specific error code 147

Error ID
FIM_E_AIL_VENDOR_SPEC_147

Error name
AilHoneywellSpecific147

Cause
None.

572 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.40 3847 - ISA_E_SFC_VENDOR_SPECIFIC_247

ISA vendor specific error 247

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_247

Error name
None.

Cause
None.

Solution
None.

3.21.41 3848 - FIM_E_AIL_VENDOR_SPEC_148

<systemdefined>: Honeywell specific error code 148

Error ID
FIM_E_AIL_VENDOR_SPEC_148

Error name
AilHoneywellSpecific148

Cause
None.

Solution
None.

3.21.42 3848 - ISA_E_SFC_VENDOR_SPECIFIC_248

ISA vendor specific error 248

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_248

Error name
None.

Cause
None.

573
3 ERROR CODES

Solution
None.

3.21.43 3849 - FIM_E_AIL_VENDOR_SPEC_149

<systemdefined>: Honeywell specific error code 149

Error ID
FIM_E_AIL_VENDOR_SPEC_149

Error name
AilHoneywellSpecific149

Cause
None.

Solution
None.

3.21.44 3849 - ISA_E_SFC_VENDOR_SPECIFIC_249

ISA vendor specific error 249

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_249

Error name
None.

Cause
None.

Solution
None.

3.21.45 3850 - FIM_E_AIL_VENDOR_SPEC_150

<systemdefined>: Honeywell specific error code 150

Error ID
FIM_E_AIL_VENDOR_SPEC_150

Error name
AilHoneywellSpecific150

Cause
None.

574 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.46 3850 - ISA_E_SFC_VENDOR_SPECIFIC_250

ISA vendor specific error 250

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_250

Error name
None.

Cause
None.

Solution
None.

3.21.47 3851 - FIM_E_AIL_VENDOR_SPEC_151

<systemdefined>: Honeywell specific error code 151

Error ID
FIM_E_AIL_VENDOR_SPEC_151

Error name
AilHoneywellSpecific151

Cause
None.

Solution
None.

3.21.48 3851 - ISA_E_SFC_VENDOR_SPECIFIC_251

ISA vendor specific error 251

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_251

Error name
None.

Cause
None.

575
3 ERROR CODES

Solution
None.

3.21.49 3852 - FIM_E_AIL_VENDOR_SPEC_152

<systemdefined>: Honeywell specific error code 152

Error ID
FIM_E_AIL_VENDOR_SPEC_152

Error name
AilHoneywellSpecific152

Cause
None.

Solution
None.

3.21.50 3852 - ISA_E_SFC_VENDOR_SPECIFIC_252

ISA vendor specific error 252

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_252

Error name
None.

Cause
None.

Solution
None.

3.21.51 3853 - FIM_E_AIL_VENDOR_SPEC_153

<systemdefined>: Honeywell specific error code 153

Error ID
FIM_E_AIL_VENDOR_SPEC_153

Error name
AilHoneywellSpecific153

Cause
None.

576 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.52 3853 - ISA_E_SFC_VENDOR_SPECIFIC_253

ISA vendor specific error 253

Error ID
ISA_E_SFC_VENDOR_SPECIFIC_253

Error name
None.

Cause
None.

Solution
None.

3.21.53 3854 - FIM_E_AIL_VENDOR_SPEC_154

<systemdefined>: Honeywell specific error code 154

Error ID
FIM_E_AIL_VENDOR_SPEC_154

Error name
AilHoneywellSpecific154

Cause
None.

Solution
None.

3.21.54 3854 - ISA_E_SFC_VENDOR_SPECIFIC_254

ISA vendor specific error 254

Error ID
None.

Error name
None.

Cause
None.

577
3 ERROR CODES

Solution
None.

3.21.55 3855 - FIM_E_AIL_VENDOR_SPEC_155

<systemdefined>: Honeywell specific error code 155

Error ID
FIM_E_AIL_VENDOR_SPEC_155

Error name
AilHoneywellSpecific155

Cause
None.

Solution
None.

3.21.56 3855 - ISA_E_SFC_VENDOR_SPECIFIC_255

ISA vendor specific error 255

Error ID
None.

Error name
None.

Cause
None.

Solution
None.

3.21.57 3856
<systemdefined>: Honeywell specific error code 156

Error ID
FIM_E_AIL_VENDOR_SPEC_156

Error name
AilHoneywellSpecific156

Cause
None.

578 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.58 3857
<systemdefined>: Honeywell specific error code 157

Error ID
FIM_E_AIL_VENDOR_SPEC_157

Error name
AilHoneywellSpecific157

Cause
None.

Solution
None.

3.21.59 3858
<systemdefined>: Honeywell specific error code 158

Error ID
FIM_E_AIL_VENDOR_SPEC_158

Error name
AilHoneywellSpecific158

Cause
None.

Solution
None.

3.21.60 3859
<systemdefined>: Honeywell specific error code 159

Error ID
FIM_E_AIL_VENDOR_SPEC_159

Error name
AilHoneywellSpecific159

Cause
None.

579
3 ERROR CODES

Solution
None.

3.21.61 3860
<systemdefined>: Honeywell specific error code 160

Error ID
FIM_E_AIL_VENDOR_SPEC_160

Error name
AilHoneywellSpecific160

Cause
None.

Solution
None.

3.21.62 3861
<systemdefined>: Honeywell specific error code 161

Error ID
FIM_E_AIL_VENDOR_SPEC_161

Error name
AilHoneywellSpecific161

Cause
None.

Solution
None.

3.21.63 3862
<systemdefined>: Honeywell specific error code 162

Error ID
FIM_E_AIL_VENDOR_SPEC_162

Error name
AilHoneywellSpecific162

Cause
None.

580 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.64 3863
<systemdefined>: Honeywell specific error code 163

Error ID
FIM_E_AIL_VENDOR_SPEC_163

Error name
AilHoneywellSpecific163

Cause
None.

Solution
None.

3.21.65 3864
<systemdefined>: Honeywell specific error code 164

Error ID
FIM_E_AIL_VENDOR_SPEC_164

Error name
AilHoneywellSpecific164

Cause
None.

Solution
None.

3.21.66 3865
<systemdefined>: Honeywell specific error code 165

Error ID
FIM_E_AIL_VENDOR_SPEC_165

Error name
AilHoneywellSpecific165

Cause
None.

581
3 ERROR CODES

Solution
None.

3.21.67 3866
<systemdefined>: Honeywell specific error code 166

Error ID
FIM_E_AIL_VENDOR_SPEC_166

Error name
AilHoneywellSpecific166

Cause
None.

Solution
None.

3.21.68 3867
<systemdefined>: Honeywell specific error code 167

Error ID
FIM_E_AIL_VENDOR_SPEC_167

Error name
AilHoneywellSpecific167

Cause
None.

Solution
None.

3.21.69 3868
<systemdefined>: Honeywell specific error code 168

Error ID
FIM_E_AIL_VENDOR_SPEC_168

Error name
AilHoneywellSpecific168

Cause
None.

582 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.70 3869
<systemdefined>: Honeywell specific error code 169

Error ID
FIM_E_AIL_VENDOR_SPEC_169

Error name
AilHoneywellSpecific169

Cause
None.

Solution
None.

3.21.71 3870
<systemdefined>: Honeywell specific error code 170

Error ID
FIM_E_AIL_VENDOR_SPEC_170

Error name
AilHoneywellSpecific170

Cause
None.

Solution
None.

3.21.72 3871
<systemdefined>: Honeywell specific error code 171

Error ID
FIM_E_AIL_VENDOR_SPEC_171

Error name
AilHoneywellSpecific171

Cause
None.

583
3 ERROR CODES

Solution
None.

3.21.73 3872
<systemdefined>: Honeywell specific error code 172

Error ID
FIM_E_AIL_VENDOR_SPEC_172

Error name
AilHoneywellSpecific172

Cause
None.

Solution
None.

3.21.74 3873
<systemdefined>: Honeywell specific error code 173

Error ID
FIM_E_AIL_VENDOR_SPEC_173

Error name
AilHoneywellSpecific173

Cause
None.

Solution
None.

3.21.75 3874
<systemdefined>: Honeywell specific error code 174

Error ID
FIM_E_AIL_VENDOR_SPEC_174

Error name
AilHoneywellSpecific174

Cause
None.

584 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.76 3875
<systemdefined>: Honeywell specific error code 175

Error ID
FIM_E_AIL_VENDOR_SPEC_175

Error name
AilHoneywellSpecific175

Cause
None.

Solution
None.

3.21.77 3876
<systemdefined>: Honeywell specific error code 176

Error ID
FIM_E_AIL_VENDOR_SPEC_176

Error name
AilHoneywellSpecific176

Cause
None.

Solution
None.

3.21.78 3877
<systemdefined>: Honeywell specific error code 177

Error ID
FIM_E_AIL_VENDOR_SPEC_177

Error name
AilHoneywellSpecific177

Cause
None.

585
3 ERROR CODES

Solution
None.

3.21.79 3878
<systemdefined>: Honeywell specific error code 178

Error ID
FIM_E_AIL_VENDOR_SPEC_178

Error name
AilHoneywellSpecific178

Cause
None.

Solution
None.

3.21.80 3879
<systemdefined>: Honeywell specific error code 179

Error ID
FIM_E_AIL_VENDOR_SPEC_179

Error name
AilHoneywellSpecific179

Cause
None.

Solution
None.

3.21.81 3880
<systemdefined>: Honeywell specific error code 180

Error ID
FIM_E_AIL_VENDOR_SPEC_180

Error name
AilHoneywellSpecific180

Cause
None.

586 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.82 3881
<systemdefined>: Honeywell specific error code 181

Error ID
FIM_E_AIL_VENDOR_SPEC_181

Error name
AilHoneywellSpecific181

Cause
None.

Solution
None.

3.21.83 3882
<systemdefined>: Honeywell specific error code 182

Error ID
FIM_E_AIL_VENDOR_SPEC_182

Error name
AilHoneywellSpecific182

Cause
None.

Solution
None.

3.21.84 3883
<systemdefined>: Honeywell specific error code 183

Error ID
FIM_E_AIL_VENDOR_SPEC_183

Error name
AilHoneywellSpecific183

Cause
None.

587
3 ERROR CODES

Solution
None.

3.21.85 3884
<systemdefined>: Honeywell specific error code 184

Error ID
FIM_E_AIL_VENDOR_SPEC_184

Error name
AilHoneywellSpecific184

Cause
None.

Solution
None.

3.21.86 3885
<systemdefined>: Honeywell specific error code 185

Error ID
FIM_E_AIL_VENDOR_SPEC_185

Error name
AilHoneywellSpecific185

Cause
None.

Solution
None.

3.21.87 3886
<systemdefined>: Honeywell specific error code 186

Error ID
FIM_E_AIL_VENDOR_SPEC_186

Error name
AilHoneywellSpecific186

Cause
None.

588 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.88 3887
<systemdefined>: Honeywell specific error code 187

Error ID
FIM_E_AIL_VENDOR_SPEC_187

Error name
AilHoneywellSpecific187

Cause
None.

Solution
None.

3.21.89 3888
<systemdefined>: Honeywell specific error code 188

Error ID
FIM_E_AIL_VENDOR_SPEC_188

Error name
AilHoneywellSpecific188

Cause
None.

Solution
None.

3.21.90 3889
<systemdefined>: Honeywell specific error code 189

Error ID
FIM_E_AIL_VENDOR_SPEC_189

Error name
AilHoneywellSpecific189

Cause
None.

589
3 ERROR CODES

Solution
None.

3.21.91 3890
<systemdefined>: Honeywell specific error code 190

Error ID
FIM_E_AIL_VENDOR_SPEC_190

Error name
AilHoneywellSpecific190

Cause
None.

Solution
None.

3.21.92 3891
<systemdefined>: Honeywell specific error code 191

Error ID
FIM_E_AIL_VENDOR_SPEC_191

Error name
AilHoneywellSpecific191

Cause
None.

Solution
None.

3.21.93 3892
<systemdefined>: Honeywell specific error code 192

Error ID
FIM_E_AIL_VENDOR_SPEC_192

Error name
AilHoneywellSpecific192

Cause
None.

590 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.94 3893
<systemdefined>: Honeywell specific error code 193

Error ID
FIM_E_AIL_VENDOR_SPEC_193

Error name
AilHoneywellSpecific193

Cause
None.

Solution
None.

3.21.95 3894
<systemdefined>: Honeywell specific error code 194

Error ID
FIM_E_AIL_VENDOR_SPEC_194

Error name
AilHoneywellSpecific194

Cause
None.

Solution
None.

3.21.96 3895
<systemdefined>: Honeywell specific error code 195

Error ID
FIM_E_AIL_VENDOR_SPEC_195

Error name
AilHoneywellSpecific195

Cause
None.

591
3 ERROR CODES

Solution
None.

3.21.97 3896
<systemdefined>: Honeywell specific error code 196

Error ID
FIM_E_AIL_VENDOR_SPEC_196

Error name
AilHoneywellSpecific196

Cause
None.

Solution
None.

3.21.98 3897
<systemdefined>: Honeywell specific error code 197

Error ID
FIM_E_AIL_VENDOR_SPEC_197

Error name
AilHoneywellSpecific197

Cause
None.

Solution
None.

3.21.99 3898
<systemdefined>: Honeywell specific error code 198

Error ID
FIM_E_AIL_VENDOR_SPEC_198

Error name
AilHoneywellSpecific198

Cause
None.

592 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.21.100 3899
<systemdefined>: Honeywell specific error code 199

Error ID
FIM_E_AIL_VENDOR_SPEC_199

Error name
AilHoneywellSpecific199

Cause
None.

Solution
None.

593
3 ERROR CODES

3.22 Codes 3900 to 3955

Related topics
“3900” on page 595
“3901” on page 595
“3902” on page 595
“3903” on page 596
“3904” on page 596
“3905” on page 596
“3906” on page 597
“3907” on page 597
“3908” on page 597
“3909” on page 598
“3910” on page 598
“3911” on page 598
“3912” on page 599
“3913” on page 599
“3914” on page 599
“3915” on page 600
“3916” on page 600
“3917” on page 600
“3918” on page 601
“3919” on page 601
“3920” on page 601
“3921” on page 602
“3922” on page 602
“3923” on page 602
“3924” on page 603
“3925” on page 603
“3926” on page 603
“3927” on page 604
“3928” on page 604
“3929” on page 604
“3930” on page 605
“3931” on page 605
“3932” on page 605
“3933” on page 606
“3934” on page 606
“3935” on page 606
“3936” on page 607
“3937” on page 607
“3938” on page 607
“3939” on page 608
“3940” on page 608
“3941” on page 608
“3942” on page 609
“3943” on page 609

594 www.honeywell.com
 3 ERROR CODES

“3944” on page 609

“3945” on page 610
“3946” on page 610
“3947” on page 610
“3948” on page 611
“3949” on page 611
“3950” on page 611
“3951” on page 612
“3952” on page 612
“3953” on page 612
“3954” on page 613
“3955” on page 613

3.22.1 3900
<systemdefined>: Honeywell specific error code 200

Error ID
FIM_E_AIL_VENDOR_SPEC_200

Error name
AilHoneywellSpecific 200

Cause
None.

Solution
None.

3.22.2 3901
<systemdefined>: Honeywell specific error code 201

Error ID
FIM_E_AIL_VENDOR_SPEC_201

Error name
AilHoneywellSpecific201

Cause
None.

Solution
None.

3.22.3 3902
<systemdefined>: Honeywell specific error code 202

595
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_202

Error name
AilHoneywellSpecific202

Cause
None.

Solution
None.

3.22.4 3903
<systemdefined>: Honeywell specific error code 203

Error ID
FIM_E_AIL_VENDOR_SPEC_203

Error name
AilHoneywellSpecific203

Cause
None.

Solution
None.

3.22.5 3904
<systemdefined>: Honeywell specific error code 204

Error ID
FIM_E_AIL_VENDOR_SPEC_204

Error name
AilHoneywellSpecific204

Cause
None.

Solution
None.

3.22.6 3905
<systemdefined>: Honeywell specific error code 192

596 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_205

Error name
AilHoneywellSpecific205

Cause
None.

Solution
None.

3.22.7 3906
<systemdefined>: Honeywell specific error code 206

Error ID
FIM_E_AIL_VENDOR_SPEC_206

Error name
AilHoneywellSpecific206

Cause
None.

Solution
None.

3.22.8 3907
<systemdefined>: Honeywell specific error code 207

Error ID
FIM_E_AIL_VENDOR_SPEC_207

Error name
AilHoneywellSpecific207

Cause
None.

Solution
None.

3.22.9 3908
<systemdefined>: Honeywell specific error code 208

597
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_208

Error name
AilHoneywellSpecific208

Cause
None.

Solution
None.

3.22.10 3909
<systemdefined>: Honeywell specific error code 209

Error ID
FIM_E_AIL_VENDOR_SPEC_209

Error name
AilHoneywellSpecific209

Cause
None.

Solution
None.

3.22.11 3910
<systemdefined>: Honeywell specific error code 210

Error ID
FIM_E_AIL_VENDOR_SPEC_210

Error name
AilHoneywellSpecific210

Cause
None.

Solution
None.

3.22.12 3911
<systemdefined>: Honeywell specific error code 211

598 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_211

Error name
AilHoneywellSpecific211

Cause
None.

Solution
None.

3.22.13 3912
<systemdefined>: Honeywell specific error code 212

Error ID
FIM_E_AIL_VENDOR_SPEC_212

Error name
AilHoneywellSpecific212

Cause
None.

Solution
None.

3.22.14 3913
<systemdefined>: Honeywell specific error code 213

Error ID
FIM_E_AIL_VENDOR_SPEC_213

Error name
AilHoneywellSpecific213

Cause
None.

Solution
None.

3.22.15 3914
<systemdefined>: Honeywell specific error code 214

599
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_214

Error name
AilHoneywellSpecific214

Cause
None.

Solution
None.

3.22.16 3915
<systemdefined>: Honeywell specific error code 215

Error ID
FIM_E_AIL_VENDOR_SPEC_215

Error name
AilHoneywellSpecific215

Cause
None.

Solution
None.

3.22.17 3916
<systemdefined>: Honeywell specific error code 216

Error ID
FIM_E_AIL_VENDOR_SPEC_216

Error name
AilHoneywellSpecific216

Cause
None.

Solution
None.

3.22.18 3917
<systemdefined>: Honeywell specific error code 217

600 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_217

Error name
AilHoneywellSpecific217

Cause
None.

Solution
None.

3.22.19 3918
<systemdefined>: Honeywell specific error code 218

Error ID
FIM_E_AIL_VENDOR_SPEC_218

Error name
AilHoneywellSpecific218

Cause
None.

Solution
None.

3.22.20 3919
<systemdefined>: Honeywell specific error code 219

Error ID
FIM_E_AIL_VENDOR_SPEC_219

Error name
AilHoneywellSpecific219

Cause
None.

Solution
None.

3.22.21 3920
<systemdefined>: Honeywell specific error code 220

601
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_220

Error name
AilHoneywellSpecific220

Cause
None.

Solution
None.

3.22.22 3921
<systemdefined>: Honeywell specific error code 221

Error ID
FIM_E_AIL_VENDOR_SPEC_221

Error name
AilHoneywellSpecific221

Cause
None.

Solution
None.

3.22.23 3922
<systemdefined>: Honeywell specific error code 222

Error ID
FIM_E_AIL_VENDOR_SPEC_222

Error name
AilHoneywellSpecific222

Cause
None.

Solution
None.

3.22.24 3923
<systemdefined>: Honeywell specific error code 223

602 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_223

Error name
AilHoneywellSpecific223

Cause
None.

Solution
None.

3.22.25 3924
<systemdefined>: Honeywell specific error code 224

Error ID
FIM_E_AIL_VENDOR_SPEC_224

Error name
AilHoneywellSpecific224

Cause
None.

Solution
None.

3.22.26 3925
<systemdefined>: Honeywell specific error code 225

Error ID
FIM_E_AIL_VENDOR_SPEC_225

Error name
AilHoneywellSpecific225

Cause
None.

Solution
None.

3.22.27 3926
<systemdefined>: Honeywell specific error code 226

603
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_226

Error name
AilHoneywellSpecific226

Cause
None.

Solution
None.

3.22.28 3927
<systemdefined>: Honeywell specific error code 227

Error ID
FIM_E_AIL_VENDOR_SPEC_227

Error name
AilHoneywellSpecific227

Cause
None.

Solution
None.

3.22.29 3928
<systemdefined>: Honeywell specific error code 228

Error ID
FIM_E_AIL_VENDOR_SPEC_228

Error name
AilHoneywellSpecific228

Cause
None.

Solution
None.

3.22.30 3929
<systemdefined>: Honeywell specific error code 229

604 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_229

Error name
AilHoneywellSpecific229

Cause
None.

Solution
None.

3.22.31 3930
<systemdefined>: Honeywell specific error code 230

Error ID
FIM_E_AIL_VENDOR_SPEC_230

Error name
AilHoneywellSpecific230

Cause
None.

Solution
None.

3.22.32 3931
<systemdefined>: Honeywell specific error code 231

Error ID
FIM_E_AIL_VENDOR_SPEC_231

Error name
AilHoneywellSpecific231

Cause
None.

Solution
None.

3.22.33 3932
<systemdefined>: Honeywell specific error code 232

605
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_232

Error name
AilHoneywellSpecific232

Cause
None.

Solution
None.

3.22.34 3933
<systemdefined>: Honeywell specific error code 233

Error ID
FIM_E_AIL_VENDOR_SPEC_233

Error name
AilHoneywellSpecific233

Cause
None.

Solution
None.

3.22.35 3934
<systemdefined>: Honeywell specific error code 234

Error ID
FIM_E_AIL_VENDOR_SPEC_234

Error name
AilHoneywellSpecific234

Cause
None.

Solution
None.

3.22.36 3935
<systemdefined>: Honeywell specific error code 235

606 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_235

Error name
AilHoneywellSpecific235

Cause
None.

Solution
None.

3.22.37 3936
<systemdefined>: Honeywell specific error code 236

Error ID
FIM_E_AIL_VENDOR_SPEC_236

Error name
AilHoneywellSpecific236

Cause
None.

Solution
None.

3.22.38 3937
<systemdefined>: Honeywell specific error code 237

Error ID
FIM_E_AIL_VENDOR_SPEC_237

Error name
AilHoneywellSpecific237

Cause
None.

Solution
None.

3.22.39 3938
<systemdefined>: Honeywell specific error code 238

607
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_238

Error name
AilHoneywellSpecific238

Cause
None.

Solution
None.

3.22.40 3939
<systemdefined>: Honeywell specific error code 239

Error ID
FIM_E_AIL_VENDOR_SPEC_239

Error name
AilHoneywellSpecific239

Cause
None.

Solution
None.

3.22.41 3940
<systemdefined>: Honeywell specific error code 240

Error ID
FIM_E_AIL_VENDOR_SPEC_240

Error name
AilHoneywellSpecific240

Cause
None.

Solution
None.

3.22.42 3941
<systemdefined>: Honeywell specific error code 241

608 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_241

Error name
AilHoneywellSpecific241

Cause
None.

Solution
None.

3.22.43 3942
<systemdefined>: Honeywell specific error code 242

Error ID
FIM_E_AIL_VENDOR_SPEC_242

Error name
AilHoneywellSpecific242

Cause
None.

Solution
None.

3.22.44 3943
<systemdefined>: Honeywell specific error code 243

Error ID
FIM_E_AIL_VENDOR_SPEC_243

Error name
AilHoneywellSpecific243

Cause
None.

Solution
None.

3.22.45 3944
<systemdefined>: Honeywell specific error code 244

609
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_244

Error name
AilHoneywellSpecific244

Cause
None.

Solution
None.

3.22.46 3945
<systemdefined>: Honeywell specific error code 245

Error ID
FIM_E_AIL_VENDOR_SPEC_245

Error name
AilHoneywellSpecific245

Cause
None.

Solution
None.

3.22.47 3946
<systemdefined>: Honeywell specific error code 246

Error ID
FIM_E_AIL_VENDOR_SPEC_246

Error name
AilHoneywellSpecific246

Cause
None.

Solution
None.

3.22.48 3947
<systemdefined>: Honeywell specific error code 247

610 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_247

Error name
AilHoneywellSpecific247

Cause
None.

Solution
None.

3.22.49 3948
<systemdefined>: Honeywell specific error code 248

Error ID
FIM_E_AIL_VENDOR_SPEC_248

Error name
AilHoneywellSpecific248

Cause
None.

Solution
None.

3.22.50 3949
<systemdefined>: Honeywell specific error code 249

Error ID
FIM_E_AIL_VENDOR_SPEC_249

Error name
AilHoneywellSpecific249

Cause
None.

Solution
None.

3.22.51 3950
<systemdefined>: Honeywell specific error code 250

611
3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_250

Error name
AilHoneywellSpecific250

Cause
None.

Solution
None.

3.22.52 3951
<systemdefined>: Honeywell specific error code 251

Error ID
FIM_E_AIL_VENDOR_SPEC_251

Error name
AilHoneywellSpecific251

Cause
None.

Solution
None.

3.22.53 3952
<systemdefined>: Honeywell specific error code 252

Error ID
FIM_E_AIL_VENDOR_SPEC_252

Error name
AilHoneywellSpecific252

Cause
None.

Solution
None.

3.22.54 3953
<systemdefined>: Honeywell specific error code 253

612 www.honeywell.com
 3 ERROR CODES

Error ID
FIM_E_AIL_VENDOR_SPEC_253

Error name
AilHoneywellSpecific253

Cause
None.

Solution
None.

3.22.55 3954
<systemdefined>: Honeywell specific error code 254

Error ID
FIM_E_AIL_VENDOR_SPEC_254

Error name
AilHoneywellSpecific254

Cause
None.

Solution
None.

3.22.56 3955
<systemdefined>: Honeywell specific error code 255

Error ID
FIM_E_AIL_VENDOR_SPEC_255

Error name
AilHoneywellSpecific255

Cause
None.

Solution
None.

613
3 ERROR CODES

3.23 Codes 5001 to 5099

Related topics
“5001” on page 616
“5002” on page 616
“5003” on page 616
“5004” on page 617
“5005” on page 617
“5006” on page 617
“5012” on page 618
“5013” on page 618
“5014” on page 618
“5015” on page 619
“5016” on page 619
“5017” on page 619
“5018” on page 620
“5019” on page 620
“5020” on page 620
“5021” on page 621
“5022” on page 621
“5023” on page 621
“5024” on page 622
“5025” on page 622
“5026” on page 622
“5027” on page 623
“5028” on page 623
“5029” on page 623
“5030” on page 624
“5031” on page 624
“5032” on page 624
“5033” on page 625
“5034” on page 625
“5035” on page 625
“5036” on page 626
“5037” on page 626
“5038” on page 626
“5039” on page 627
“5040” on page 627
“5041” on page 627
“5042” on page 628
“5043” on page 628
“5044” on page 628
“5045” on page 629
“5046” on page 629
“5047” on page 629
“5048” on page 630
“5049” on page 630

614 www.honeywell.com
 3 ERROR CODES

“5050” on page 630

“5051” on page 631
“5052” on page 631
“5053” on page 631
“5054” on page 632
“5055” on page 632
“5056” on page 632
“5057” on page 633
“5058” on page 633
“5059” on page 633
“5060” on page 634
“5061” on page 634
“5062” on page 634
“5063” on page 635
“5064” on page 635
“5065” on page 635
“5066” on page 636
“5067” on page 636
“5068” on page 636
“5069” on page 637
“5070” on page 637
“5071” on page 637
“5072” on page 638
“5073” on page 638
“5074” on page 638
“5075” on page 639
“5076” on page 639
“5077” on page 639
“5078” on page 640
“5079” on page 640
“5080” on page 640
“5081” on page 641
“5082” on page 641
“5083” on page 641
“5084” on page 642
“5085” on page 642
“5086” on page 642
“5087” on page 643
“5088” on page 643
“5089” on page 643
“5090” on page 644
“5091” on page 644
“5092” on page 644
“5093” on page 645
“5094” on page 645
“5095” on page 645
“5096” on page 646
“5097” on page 646

615
3 ERROR CODES

“5098” on page 646

“5099” on page 647

3.23.1 5001
Value is clamped

Error ID
PMIO_E_DoValueClampedError

Error name
ValueClamped

Cause
None.

Solution
None.

3.23.2 5002
String truncated while storing.

Error ID
PMIO_E_StringTruncatedOnStoreError

Error name
StringTruncated

Cause
None.

Solution
None.

3.23.3 5003
Initialization Warning.

Error ID
PMIO_E_DoInitializationWarning

Error name
InitWarning

Cause
None.

616 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.4 5004
Slot Checkpoint Partially Restored

Error ID
PMIO_PMIO_E_DoSlotCheckpointPartiallyRestored

Error name
DoSlotCheckpointPartiallyRestored

Cause
None.

Solution
None.

3.23.5 5005
Ucn Number Fast Points Clamped

Error ID
PMIO_E_DoUcnNumFastPointsClamped

Error name
DoUcnNumFastPointsClamped

Cause
None.

Solution
None.

3.23.6 5006
Data overlaps with other array point data.

Error ID
PMIO_E_DoDataOverlapsWarning

Error name
DataOverlaps

Cause
None.

617
3 ERROR CODES

Solution
None.

3.23.7 5012
Item is valid.

Error ID
PMIO_E_Ok

Error name
OK

Cause
None.

Solution
None.

3.23.8 5013
Communication errors start here.

Error ID
PMIO_E_IolCommErrorStart

Error name
IolCommErrStart

Cause
None.

Solution
None.

3.23.9 5014
Invalid alert bit.

Error ID
PMIO_E_IolAlert

Error name
IolAlert

Cause
None.

618 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.10 5015
Invalid destination address.

Error ID
PMIO_E_IolDest

Error name
IolDest

Cause
None.

Solution
None.

3.23.11 5016
Invalid character count.

Error ID
PMIO_E_IolChrct

Error name
IolChrct

Cause
None.

Solution
None.

3.23.12 5017
Invalid source address.

Error ID
PMIO_E_IolSrc

Error name
IolSrc

Cause
None.

619
3 ERROR CODES

Solution
None.

3.23.13 5018
Invalid command.

Error ID
PMIO_E_IolComm

Error name
IolComm

Cause
None.

Solution
None.

3.23.14 5019
Invalid checksum.

Error ID
PMIO_E_IolChksm

Error name
IolChksm

Cause
None.

Solution
None.

3.23.15 5020
No response.

Error ID
PMIO_E_IolNoRsp

Error name
IolNoRsp

Cause
None.

620 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.16 5021
Character timeout.

Error ID
PMIO_E_IolChrtm

Error name
IolChrtm

Cause
None.

Solution
None.

3.23.17 5022
Message overrun.

Error ID
PMIO_E_IolOrun

Error name
IolOrun

Cause
None.

Solution
None.

3.23.18 5023
Gap error.

Error ID
PMIO_E_IolGap

Error name
IolGap

Cause
None.

621
3 ERROR CODES

Solution
None.

3.23.19 5024
Loopback error.

Error ID
PMIO_E_IolLpbk

Error name
IolLpbk

Cause
None.

Solution
None.

3.23.20 5025
Error passing token: NTH=0.

Error ID
PMIO_E_IolNth0

Error name
IolNth0

Cause
None.

Solution
None.

3.23.21 5026
Token recovery error

Error ID
PMIO_E_IolRcvTkn

Error name
IolRcvTkn

Cause
None.

622 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.22 5027
Reply buffer overflow.

Error ID
PMIO_E_IolRplBufOv

Error name
IolRplBufOv

Cause
None.

Solution
None.

3.23.23 5028
Token pass time out.

Error ID
PMIO_E_IolTknTmOut

Error name
IolTknTmOut

Cause
None.

Solution
None.

3.23.24 5029
I/O Link resource errors.

Error ID
PMIO_E_IolResourceError

Error name
IolResourceError

Cause
None.

623
3 ERROR CODES

Solution
None.

3.23.25 5030
Operation in progress.

Error ID
PMIO_E_IolWmInProgress

Error name
IolWmInProgress

Cause
None.

Solution
None.

3.23.26 5031
Receive buffer overflow.

Error ID
PMIO_E_IolRcvBufOv

Error name
IolRcvBufOv

Cause
None.

Solution
None.

3.23.27 5032
Remote fetch pending

Error ID
PMIO_E_IolRemoteFetchPending

Error name
IolRemoteFetchPending

Cause
None.

624 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.28 5033
IOL Interrupt Circuit Failure

Error ID
PmioIolIntCircuitFail

Error name
IolIntCircuitFail

Cause
None.

Solution
None.

3.23.29 5034
I/O Link driver error.

Error ID
PMIO_E_IolDriverErr

Error name
IolDriverErr

Cause
None.

Solution
None.

3.23.30 5035
End of history data file encountered.

Error ID
PMIO_E_DoEndOfHistoryDataFile

Error name
EndOfHistoryDataFile

Cause
None.

625
3 ERROR CODES

Solution
None.

3.23.31 5036
End of user specified samples or time encountered.

Error ID
PMIO_E_DoEndUserSpecifiedSamplesOrTime

Error name
EndUserSpecifiedSamplesOrTime

Cause
None.

Solution
None.

3.23.32 5037
User allocated buffer is full.

Error ID
PMIO_E_DoUserAllocatedBufferFull

Error name
UserAllocatedBufferFull

Cause
None.

Solution
None.

3.23.33 5038
TVR too small

Error ID
PMIO_E_TvrTooSmall

Error name
TvrTooSmall

Cause
None.

626 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.34 5039
Invalid access level.

Error ID
PMIO_E_DoAccessLevelInvalid

Error name
AccessLevelInvalid

Cause
None.

Solution
None.

3.23.35 5040
Calibration in progress.

Error ID
PMIO_E_DoCalibInProgress

Error name
CalibInProgress

Cause
None.

Solution
None.

3.23.36 5041
Change not prermitted by operator.

Error ID
PMIO_E_DoChangeNotPermittedByOperator

Error name
ChangeNotPermittedByOperator

Cause
None.

627
3 ERROR CODES

Solution
None.

3.23.37 5042
Checkpoint currently in progress

Error ID
PMIO_E_DoCheckPointInProgress

Error name
DoCheckPointInProgress

Cause
None.

Solution
None.

3.23.38 5043
Bad character data

Error ID
PMIO_E_DoChrcDataBad

Error name
ChrcDataBad

Cause
None.

Solution
None.

3.23.39 5044
Command not supported by system.

Error ID
PMIO_E_DoCommandNotSupported

Error name
CommandNotSupported

Cause
None.

628 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.40 5045
Configuration mismatch.

Error ID
PMIO_E_DoConfigurationMismatchError

Error name
ConfigMismatch

Cause
None.

Solution
None.

3.23.41 5046
Control output connection not configured.

Error ID
PMIO_E_DoControlOutputConnNotConfigured

Error name
ControlOutputConnNotConfigured

Cause
None.

Solution
None.

3.23.42 5047
Data type error.

Error ID
PMIO_E_DoDataTypeError

Error name
DataTypeError

Cause
None.

629
3 ERROR CODES

Solution
None.

3.23.43 5048
Engineering Units (EU) span too small.

Error ID
PMIO_E_DoEngrUnitSpanTooSmall

Error name
EngrUnitSpanTooSmall

Cause
None.

Solution
None.

3.23.44 5049
External mode switching Is enabled.

Error ID
PMIO_E_DoExternalModeSwitchingEnabled

Error name
ExternalModeSwitchingEnabled

Cause
None.

Solution
None.

3.23.45 5050
That function is not implemented.

Error ID
PMIO_E_DoFunctionNotImplemented

Error name
FunctionNotImplemented

Cause
None.

630 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.46 5051
Illegal Value.

Error ID
PMIO_E_DoIllegalValue

Error name
IllegalValue

Cause
None.

Solution
None.

3.23.47 5052
Initialization error.

Error ID
PMIO_E_DoInitializationError

Error name
InitError

Cause
None.

Solution
None.

3.23.48 5053
Algorithm equation invalid.

Error ID
PMIO_E_DoInvalidAlgorithmEquation

Error name
InvalidAlgorithmEquation

Cause
None.

631
3 ERROR CODES

Solution
None.

3.23.49 5054
Invalid Destination Parameter.

Error ID
PMIO_E_DoInvalidDestinationParameter

Error name
InvalidDestinationParameter

Cause
None.

Solution
None.

3.23.50 5055
Invalid destination point ID.

Error ID
PMIO_E_DoInvalidDestinationPointId

Error name
InvalidDestinationPointId

Cause
None.

Solution
None.

3.23.51 5056
Invalid mode.

Error ID
PMIO_E_DoInvalidMode

Error name
InvalidMode

Cause
None.

632 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.52 5057
Invalid mode attribute

Error ID
PMIO_E_DoInvalidModeAttribute

Error name
InvalidModeAttribute

Cause
None.

Solution
None.

3.23.53 5058
Invalid normal mode.

Error ID
PMIO_E_DoInvalidNormalMode

Error name
InvalidNormalMode

Cause
None.

Solution
None.

3.23.54 5059
Invalid number of control inputs.

Error ID
PMIO_E_DoInvalidNumberOfCtlInputs

Error name
InvalidNumberOfCtlInputs

Cause
None.

633
3 ERROR CODES

Solution
None.

3.23.55 5060
Invalid number of control outputs.

Error ID
PMIO_E_DoInvalidNumberOfCtlOutputs

Error name
InvalidNumberOfCtlOutputs

Cause
None.

Solution
None.

3.23.56 5061
Invalid number of process value inputs.

Error ID
PMIO_E_DoInvalidNumberOfPvInputs

Error name
InvalidNumberOfPvInputs

Cause
None.

Solution
None.

3.23.57 5062
Invalid Pn type for IOL pre-fetch

Error ID
PMIO_E_DoInvalidPntypForIolPf

Error name
DoInvalidPntypForIolPf

Cause
None.

634 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.58 5063
Invalid Pn type for IOL post-fetch

Error ID
PMIO_E_DoInvalidPntypForIolPs

Error name
DoInvalidPntypForIolPs

Cause
None.

Solution
None.

3.23.59 5064
Invalid slot index.

Error ID
PMIO_E_DoInvalidSlotIndex

Error name
InvalidSlotIndex

Cause
None.

Solution
None.

3.23.60 5065
Invalid slot type.

Error ID
PMIO_E_DoInvalidSlotType

Error name
InvalidSlotType

Cause
None.

635
3 ERROR CODES

Solution
None.

3.23.61 5066
Invalid target value processor state.

Error ID
PMIO_E_DoInvalidTargetValueProcState

Error name
InvalidTargetValueProcState

Cause
None.

Solution
None.

3.23.62 5067
Maximum number of IOL pre-fetch connections exceeded.

Error ID
PMIO_E_DoMaxIolPfConnectionsExceeded

Error name
DoMaxIolPfConnectionsExceeded

Cause
None.

Solution
None.

3.23.63 5068
Maximum number of IOL post-fetch connections exceeded.

Error ID
PMIO_E_DoMaxIolPsConnectionsExceeded

Error name
DoMaxIolPsConnectionsExceeded

Cause
None.

636 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.64 5069
Limit or range crossover.

Error ID
PMIO_E_DoLimitOrRangeCrossover

Error name
LimitOrRangeCrossover

Cause
None.

Solution
None.

3.23.65 5070
Limit or range exceeded.

Error ID
PMIO_E_DoLimitOrRangeExceeded

Error name
LimitOrRangeExceeded

Cause
None.

Solution
None.

3.23.66 5071
Maximum available memory exceeded.

Error ID
PMIO_E_DoMaxAvailableMemoryExceeded

Error name
MaxAvailableMemoryExceeded

Cause
None.

637
3 ERROR CODES

Solution
None.

3.23.67 5072
Maximum point processing rate exceeded.

Error ID
PMIO_E_DoMaxPointProcessingRateExceeded

Error name
MaxPointProcessingRateExceeded

Cause
None.

Solution
None.

3.23.68 5073
Mode must be manual.

Error ID
PMIO_E_DoModeMustBeManual

Error name
ModeMustBeManual

Cause
None.

Solution
None.

3.23.69 5074
Mode is not manual or point active

Error ID
PMIO_E_DoModeNotManOrPointActive

Error name
ModeNotManOrPointActive

Cause
None.

638 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.70 5075
No pre-fetch connections for selected slot

Error ID
PMIO_E_DoNoPfConnectionsForSelectedSlot

Error name
DoNoPfConnectionsForSelectedSlot

Cause
None.

Solution
None.

3.23.71 5076
Normal attribute is not configured.

Error ID
PMIO_E_DoNormalAttributeNotConfigured

Error name
NormalAttributeNotConfigured

Cause
None.

Solution
None.

3.23.72 5077
Normal mode is not configured.

Error ID
PMIO_E_DoNormalModeIsNotConfigured

Error name
NormalModeIsNotConfigured

Cause
None.

639
3 ERROR CODES

Solution
None.

3.23.73 5078
Only one connection is allowed to the I/O Link.

Error ID
PMIO_E_DoOnlyOneConnectionAllowedToIOL

Error name
OnlyOneConnectionAllowedToIOL

Cause
None.

Solution
None.

3.23.74 5079
Parameter cannot be changed.

Error ID
PMIO_E_DoParameterCanNotBeChanged

Error name
ParameterCanNotBeChanged

Cause
None.

Solution
None.

3.23.75 5080
Parameter ID error.

Error ID
PMIO_E_DoParameterIdError

Error name
ParameterIdError

Cause
None.

640 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.76 5081
Parameter is invalid.

Error ID
PMIO_E_DoParameterInvalid

Error name
ParameterInvalid

Cause
None.

Solution
None.

3.23.77 5082
Parameter type invalid.

Error ID
PMIO_E_DoParameterTypeInvalid

Error name
ParameterTypeInvalid

Cause
None.

Solution
None.

3.23.78 5083
Pre-fetch buffer overflow

Error ID
PMIO_E_DoPfBufferOverflow

Error name
DoPfBufferOverflow

Cause
None.

641
3 ERROR CODES

Solution
None.

3.23.79 5084
Post-fetch buffer overflow

Error ID
PMIO_E_ DoPsBufferOverflow

Error name
DoPsBufferOverflow

Cause
None.

Solution
None.

3.23.80 5085
Point Execution State (PTEXECST) or Mode State (MODSTATE) parameter inconsistency.

Error ID
PMIO_E_DoPtexecstOrModlstatInconsistent

Error name
PtexecstOrModlstatInconsistent

Cause
None.

Solution
None.

3.23.81 5086
Point in alarm.

Error ID
PMIO_E_DoPointInAlarm

Error name
PointInAlarm

Cause
None.

642 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.82 5087
Point is local manual.

Error ID
PMIO_E_DoPointIsLocalManual

Error name
PointIsLocalManual

Cause
None.

Solution
None.

3.23.83 5088
Point is red tagged.

Error ID
PMIO_E_DoPointIsRedTagged

Error name
PointIsRedTagged

Cause
None.

Solution
None.

3.23.84 5089
Point must be inactive.

Error ID
PMIO_E_DoPointMustBeInactive

Error name
PointMustBeInactive

Cause
None.

643
3 ERROR CODES

Solution
None.

3.23.85 5090
Point must be inactive or idle.

Error ID
PMIO_E_DoPointMustBeInactiveOrIdle

Error name
PointMustBeInactiveOrIdle

Cause
None.

Solution
None.

3.23.86 5091
Ppx task not started

Error ID
PMIO_E_DoPpxTaskNotStarted

Error name
DoPpxTaskNotStarted

Cause
None.

Solution
None.

3.23.87 5092
Ppx task not terminated

Error ID
PMIO_E_DoPpxTaskNotTerminated

Error name
DoPpxTaskNotTerminated

Cause
None.

644 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.88 5093
The Process Value source is invalid

Error ID
PMIO_E_DoPvsourceInvalid

Error name
PvsourceInvalid

Cause
None.

Solution
None.

3.23.89 5094
Parameter is read only.

Error ID
PMIO_E_DoReadOnlyParameter

Error name
ReadOnlyParameter

Cause
None.

Solution
None.

3.23.90 5095
Secondary has too many primaries.

Error ID
PMIO_E_DoSecondaryHasTooManyPrimaries

Error name
SecondaryHasTooManyPrimaries

Cause
None.

645
3 ERROR CODES

Solution
None.

3.23.91 5096
Slot is invalid.

Error ID
PMIO_E_DoSlotInvalid

Error name
None.

Cause
None.

Solution
None.

3.23.92 5097
Source of request is invalid.

Error ID
PMIO_E_DoSourceOfRequestInvalid

Error name
SourceOfRequestInvalid

Cause
None.

Solution
None.

3.23.93 5098
State must be idle.

Error ID
PMIO_E_DoStateMustBeIdle

Error name
StateMustBeIdle

Cause
None.

646 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.23.94 5099
State must be run.

Error ID
PMIO_E_DoStateMustBeRun

Error name
StateMustBeRun

Cause
None.

Solution
None.

647
3 ERROR CODES

3.24 Codes 5100 to 5197

Related topics
“5100” on page 649
“5101” on page 650
“5102” on page 650
“5103” on page 650
“5104” on page 651
“5105” on page 651
“5106” on page 651
“5107” on page 652
“5108” on page 652
“5109” on page 652
“5110” on page 653
“5111” on page 653
“5112” on page 653
“5113” on page 654
“5114” on page 654
“5115” on page 654
“5116” on page 655
“5117” on page 655
“5118” on page 655
“5119” on page 656
“5120” on page 656
“5121” on page 656
“5122” on page 657
“5123” on page 657
“5124” on page 657
“5125” on page 658
“5126” on page 658
“5127” on page 658
“5128” on page 659
“5129” on page 659
“5130” on page 659
“5131” on page 660
“5132” on page 660
“5133” on page 660
“5134” on page 661
“5135” on page 661
“5136” on page 661
“5137” on page 662
“5138” on page 662
“5139” on page 662
“5140” on page 663
“5141” on page 663
“5142” on page 663
“5143” on page 664

648 www.honeywell.com
 3 ERROR CODES

“5144” on page 664

“5145” on page 664
“5146” on page 665
“5147” on page 665
“5148” on page 665
“5149” on page 666
“5150” on page 666
“5151” on page 666
“5152” on page 667
“5153” on page 667
“5154” on page 667
“5155” on page 668
“5156” on page 668
“5157” on page 668
“5158” on page 669
“5159” on page 669
“5160” on page 669
“5161” on page 670
“5162” on page 670
“5168” on page 670
“5169” on page 671
“5170” on page 671
“5171” on page 671
“5172” on page 672
“5173” on page 672
“5174” on page 672
“5175” on page 673
“5176” on page 673
“5177” on page 673
“5197” on page 674

3.24.1 5100
Store operationnot allowed with Spc connection

Error ID
PMIO_E_DoStoreNotAllowedWithSpcConn

Error name
DoStoreNotAllowedWithSpcConn

Cause
None.

Solution
None.

649
3 ERROR CODES

3.24.2 5101
Um scan rate must be null

Error ID
PMIO_E_DoUmscanrtMustBeKnoll

Error name
DoUmscanrtMustBeKnoll

Cause
None.

Solution
None.

3.24.3 5102
Um scan rate must not be null

Error ID
PMIO_E_DoUmscanrtMustNotBeKnoll

Error name
DoUmscanrtMustNotBeKnoll

Cause
None.

Solution
None.

3.24.4 5103
Invalid message number

Error ID
PMIO_E_DoWmInvalid

Error name
WmInvalid

Cause
None.

Solution
None.

650 www.honeywell.com
 3 ERROR CODES

3.24.5 5104
Insufficient data supplied.

Error ID
PMIO_E_DoWmInsufData

Error name
WmInsufData

Cause
None.

Solution
None.

3.24.6 5105
Invalid module run status.

Error ID
PMIO_E_DoWmInvalidSt

Error name
WmInvalidSt

Cause
None.

Solution
None.

3.24.7 5106
Wrong point type for module.

Error ID
PMIO_E_DoWrongPointTypeForModule

Error name
WrongPointTypeForModule

Cause
None.

Solution
None.

651
3 ERROR CODES

3.24.8 5107
Point is shut down.

Error ID
PMIO_E_DoPointIsShutdown

Error name
PointIsShutdown

Cause
None.

Solution
None.

3.24.9 5108
HPN scan table overflow

Error ID
PMIO_E_DoHPNScanTblOverflow

Error name
DoHPNScanTblOverflo

Cause
None.

Solution
None.

3.24.10 5109
Calculator syntax error.

Error ID
PMIO_E_DoCalcultrSyntaxError

Error name
CalcultrSyntaxError

Cause
None.

Solution
None.

652 www.honeywell.com
 3 ERROR CODES

3.24.11 5110
Calculator expression is too big.

Error ID
PMIO_E_DoCalcultrExprTooBig

Error name
CalcultrExprTooBig

Cause
None.

Solution
None.

3.24.12 5111
Permissive Error.

Error ID
PMIO_E_DoPermissiveError

Error name
PermissiveError

Cause
None.

Solution
None.

3.24.13 5112
Interlock error.

Error ID
PMIO_E_DoInterlockError

Error name
InterlockError

Cause
None.

Solution
None.

653
3 ERROR CODES

3.24.14 5113
HPN communications error

Error ID
PMIO_E_DoHPNComError

Error name
DoHPNComError

Cause
None.

Solution
None.

3.24.15 5114
DescriptionEntity ID error.

Error ID
PMIO_E_DoEntityIdError

Error name
EntityIdError

Cause
None.

Solution
None.

3.24.16 5115
Slot checkpoint exceeds available memory

Error ID
PMIO_E_DoSlotCheckpntExceedsAvailExtMem

Error name
DoSlotCheckpntExceedsAvailExtMem

Cause
None.

Solution
None.

654 www.honeywell.com
 3 ERROR CODES

3.24.17 5116
Invalid state parameter status.

Error ID
PMIO_E_DoInvalidStatePaStatus

Error name
InvalidStatePaStatus

Cause
None.

Solution
None.

3.24.18 5117
Invalid for secondary parameter status.

Error ID
PMIO_E_DoInvalidForSecondaryPaStatus

Error name
InvalidForSecondaryPaStatus

Cause
None.

Solution
None.

3.24.19 5118
Bad checksum.

Error ID
PMIO_E_DoChecksumBad

Error name
ChecksumBad

Cause
None.

Solution
None.

655
3 ERROR CODES

3.24.20 5119
Invalid sequence execution state.

Error ID
PMIO_E_DoInvalidSequenceExecutionState

Error name
InvalidSequenceExecutionState

Cause
None.

Solution
None.

3.24.21 5120
Invalid Process Module state

Error ID
PMIO_E_DoInvalidProcessModuleState

Error name
DoInvalidProcessModuleState

Cause
None.

Solution
None.

3.24.22 5121
Abnormal Handler Not Available.

Error ID
PMIO_E_DoAbnormalHandlerNotAvailable

Error name
AbnormalHandlerNotAvailable

Cause
None.

Solution
None.

656 www.honeywell.com
 3 ERROR CODES

3.24.23 5122
Sequence program must be loaded.

Error ID
PMIO_E_DoSequenceProgramMustBeLoaded

Error name
SequenceProgramMustBeLoaded

Cause
None.

Solution
None.

3.24.24 5123
Sequence program exceeds configuration slot size.

Error ID
PMIO_E_DoSeqProgExceedsConfigSlotSize

Error name
SeqProgExceedsConfigSlotSize

Cause
None.

Solution
None.

3.24.25 5124
No confirmable message pending.

Error ID
PMIO_E_DoNoConfirmableMessagePending

Error name
NoConfirmableMessagePending

Cause
None.

Solution
None.

657
3 ERROR CODES

3.24.26 5125
Fatal sequence code error.

Error ID
PMIO_E_DoFatalSequenceCodeError

Error name
FatalSequenceCodeError

Cause
None.

Solution
None.

3.24.27 5126
Checkpoint revision code error

Error ID
PMIO_E_DoCheckpointRevCodeError

Error name
DoCheckpointRevCodeError

Cause
None.

Solution
None.

3.24.28 5127
Cannot leave scope of normal.

Error ID
PMIO_E_DoCannotLeaveScopeOfNormal

Error name
CannotLeaveScopeOfNormal

Cause
None.

Solution
None.

658 www.honeywell.com
 3 ERROR CODES

3.24.29 5128
Cannot leave scope of abnormal.

Error ID
PMIO_E_DoCannotLeaveScopeOfAbnormal

Error name
CannotLeaveScopeOfAbnormal

Cause
None.

Solution
None.

3.24.30 5129
Cannot leave current block.

Error ID
PMIO_E_DoCannotLeaveCurrentBlock

Error name
CannotLeaveCurrentBlock

Cause
None.

Solution
None.

3.24.31 5130
Cannot leave current step.

Error ID
PMIO_E_DoCannotLeaveCurrentStep

Error name
CannotLeaveCurrentStep

Cause
None.

Solution
None.

659
3 ERROR CODES

3.24.32 5131
Sequence program invalid destination node type.

Error ID
PMIO_E_DoSeqProgInvalidDestNodeType

Error name
SeqProgInvalidDestinationNodeType

Cause
None.

Solution
None.

3.24.33 5132
CL compiler version or revision error

Error ID
PMIO_E_DoCLCompilerVerOrRevisionError

Error name
DoCLCompilerVerOrRevisionError

Cause
None.

Solution
None.

3.24.34 5133
Sequence DLL packet out of order

Error ID
PMIO_E_DoSequenceDLLPacketOutOfOrder

Error name
DoSequenceDLLPacketOutOfOrder

Cause
None.

Solution
None.

660 www.honeywell.com
 3 ERROR CODES

3.24.35 5134
Cannot leave current phase.

Error ID
PMIO_E_DoCannotLeaveCurrentPhase

Error name
CannotLeaveCurrentPhase

Cause
None.

Solution
None.

3.24.36 5135
Retry.

Error ID
PMIO_E_DoRetry

Error name
Retry

Cause
None.

Solution
None.

3.24.37 5136
IOL PS requested

Error ID
PMIO_E_DoIolPSRequested

Error name
DoIolPSRequested

Cause
None.

Solution
None.

661
3 ERROR CODES

3.24.38 5137
Prior function has not yet completed.

Error ID
PMIO_E_DoPriorFunctionNotComplete

Error name
PriorFunctionNotComplete

Cause
None.

Solution
None.

3.24.39 5138
Cannot obtain PLC program mode

Error ID
PMIO_E_DoCannotObtainPlcProgramMode

Error name
DoCannotObtainPlcProgramMode

Cause
None.

Solution
None.

3.24.40 5139
PLC write attempt failed

Error ID
PMIO_E_DoPlcWriteFailed

Error name
DoPlcWriteFailed

Cause
None.

Solution
None.

662 www.honeywell.com
 3 ERROR CODES

3.24.41 5140
PLC read attempt failed

Error ID
PMIO_E_DoPlcReadFailed

Error name
DoPlcReadFailed

Cause
None.

Solution
None.

3.24.42 5141
PLC read attempt completed

Error ID
PMIO_E_DoPlcReadComplete

Error name
DoPlcReadComplete

Cause
None.

Solution
None.

3.24.43 5142
Illegal LM redundancy state

Error ID
PMIO_E_DoIllegalLmRedundantState

Error name
DoIllegalLmRedundantState

Cause
None.

Solution
None.

663
3 ERROR CODES

3.24.44 5143
Array mapping violation

Error ID
PMIO_E_DoArrayMappingViolation

Error name
ArrayMappingViolation

Cause
None.

Solution
None.

3.24.45 5144
DescriptionParameter communication error.

Error ID
PMIO_E_PaCommunicationError

Error name
CommunicationError

Cause
None.

Solution
None.

3.24.46 5145
HPN encode error

Error ID
PMIO_E_HpnEncodeError

Error name
HpnEncodeError

Cause
None.

Solution
None.

664 www.honeywell.com
 3 ERROR CODES

3.24.47 5146
HPN reception error

Error ID
PMIO_E_HpnReceptionError

Error name
HpnReceptionError

Cause
None.

Solution
None.

3.24.48 5147
HPN transmission error

Error ID
PMIO_E_HpnTransmitError

Error name
HpnTransmitError

Cause
None.

Solution
None.

3.24.49 5148
DescriptionDatabase not valid.

Error ID
PMIO_E_DoDbNotValid

Error name
DbNotValid

Cause
None.

Solution
None.

665
3 ERROR CODES

3.24.50 5149
Swap failure.

Error ID
PMIO_E_DoSwapFail

Error name
SwapFail

Cause
None.

Solution
None.

3.24.51 5150
Parameter LM PAF overflow

Error ID
PMIO_E_LmPafOverflow

Error name
LmPafOverflow

Cause
None.

Solution
None.

3.24.52 5151
Maximum I/O Link scan limit exceeded.

Error ID
PMIO_E_DoIolScanMaxLimitExceeded

Error name
IolScanMaxLimitExceeded

Cause
None.

Solution
None.

666 www.honeywell.com
 3 ERROR CODES

3.24.53 5152
I/O Link scan cycle limit exceeded.

Error ID
PMIO_E_DoIolScanCycleLimitExceeded

Error name
IolScanCycleLimitExceeded

Cause
None.

Solution
None.

3.24.54 5153
Command invalid for personality on processor.

Error ID
PMIO_E_DoCmdInvalidForOnProcPersonality

Error name
CmdInvalidForOnProcPersonality

Cause
None.

Solution
None.

3.24.55 5154
Command invalid in simulation mode.

Error ID
PMIO_E_DoCmdInvalidForSimulPersonality

Error name
CmdInvalidForSimulPersonality

Cause
None.

Solution
None.

667
3 ERROR CODES

3.24.56 5155
State must be pause for IOP swap command to be valid for Normal mode only. .

Error ID
PMIO_E_DoStateMustBePause

Error name
StateMustBePause

Cause
None.

Solution
None.

3.24.57 5156
State must be Run or Pause for the RESUME command to be valid. .

Error ID
PMIO_E_DoStateMustBeRunOrPause

Error name
StateMustBeRunOrPause

Cause
None.

Solution
None.

3.24.58 5157
State must be idle or pause for parameter changes normally allowed only in RUN. .

Error ID
PMIO_E_DoStateMustBeIdleOrPause

Error name
StateMustBeIdleOrPause

Cause
None.

Solution
None.

668 www.honeywell.com
 3 ERROR CODES

3.24.59 5158
Database communication error.

Error ID
PMIO_E_IolDatabaseInterface

Error name
IolDatabaseInterface

Cause
None.

Solution
None.

3.24.60 5159
Control request communication error.

Error ID
PMIO_E_ControlRequest

Error name
ControlRequest

Cause
None.

Solution
None.

3.24.61 5160
Device timeout.

Error ID
PMIO_E_DeviceTimeout

Error name
DeviceTimeout

Cause
None.

Solution
None.

669
3 ERROR CODES

3.24.62 5161
Device fail.

Error ID
PMIO_E_DeviceFail

Error name
DeviceFail

Cause
None.

Solution
None.

3.24.63 5162
FTA is Missing.

Error ID
PMIO_E_FtaMissing

Error name
FtaMissing

Cause
None.

Solution
None.

3.24.64 5168
Cannot delete assigned function block (FB).

Error ID
PMIO_E_DoFbAssignedCannotDelete

Error name
DoFbAssignedCannotDelete

Cause
None.

Solution
None.

670 www.honeywell.com
 3 ERROR CODES

3.24.65 5169
Control output is not permitted.

Error ID
PMIO_E_DoCntlOutputNotPermitted

Error name
DoCntlOutputNotPermitted

Cause
None.

Solution
None.

3.24.66 5170
Alias address mismatch.

Error ID
PMIO_E_DoAddressAliasMismatch

Error name
DoAddressAliasMismatch

Cause
None.

Solution
None.

3.24.67 5171
Writes are not Permitted.

Error ID
PMIO_E_DoWritesNotPermitted

Error name
DoWritesNotPermitted

Cause
None.

Solution
None.

671
3 ERROR CODES

3.24.68 5172
Invalid parameter index.

Error ID
PMIO_E_DoParmIndexInvalid

Error name
DoParmIndexInvalid

Cause
None.

Solution
None.

3.24.69 5173
Maximum connections exceeded.

Error ID
PMIO_E_DoMaxConnectionsExceeded

Error name
DoMaxConnectionsExceeded

Cause
None.

Solution
None.

3.24.70 5174
Incompatible files.

Error ID
PMIO_E_DoFilesIncompatible

Error name
DoFilesIncompatible

Cause
None.

Solution
None.

672 www.honeywell.com
 3 ERROR CODES

3.24.71 5175
Target is invalid.

Error ID
PMIO_E_DoInvalidTarget

Error name
DoInvalidTarget

Cause
None.

Solution
None.

3.24.72 5176
State must be Run or Idle.

Error ID
PMIO_E_DoStateMustBeIdleOrRun

Error name
DoStateMustBeIdleOrRun

Cause
None.

Solution
None.

3.24.73 5177
Cannot reduce slots, points are in NIM

Error ID
PMIO_E_DoCannotReduceSlotsPointsInNim

Error name
DoCannotReduceSlotsPointsInNim

Cause
None.

Solution
None.

673
3 ERROR CODES

3.24.74 5197
BRDP write is pending.

Error ID
PMIO_E_BrdpWritePending

Error name
BrdpWritePending

Cause
None.

Solution
None.

674 www.honeywell.com
 3 ERROR CODES

3.25 Codes 5201 to 5215

Related topics
“5201” on page 675
“5202” on page 675
“5203” on page 676
“5204” on page 676
“5205” on page 676
“5206” on page 677
“5207” on page 677
“5208” on page 677
“5209” on page 678
“5210” on page 678
“5211” on page 678
“5212” on page 679
“5213” on page 679
“5214” on page 679
“5215” on page 680

3.25.1 5201
BRDP invalid handle was provided.

Error ID
PMIO_E_BrdpInvalidHandle

Error name
BrdpInvalidHandle

Cause
None.

Solution
None.

3.25.2 5202
BRDP is busy.

Error ID
PMIO_E_BrdpBusy

Error name
BrdpBusy

Cause
None.

675
3 ERROR CODES

Solution
None.

3.25.3 5203
BRDP is running.

Error ID
PMIO_E_BrdpRunning

Error name
BrdpRunning

Cause
None.

Solution
None.

3.25.4 5204
BRDP is initiating.

Error ID
PMIO_E_BrdpInitiating

Error name
BrdpInitiating

Cause
None.

Solution
None.

3.25.5 5205
Failed BRDP transaction.

Error ID
PMIO_E_BrdpFail

Error name
BrdpFail

Cause
None.

676 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.25.6 5206
None.

Error ID
PMIO_E_BrdpSuccess

Error name
BrdpSuccess

Cause
None.

Solution
None.

3.25.7 5207
BRDP invalid message number was received.

Error ID
PMIO_E_BrdpInvalidMsgNumber

Error name
BrdpInvalidMsgNumber

Cause
None.

Solution
None.

3.25.8 5208
BRDP duplicate handle was received.

Error ID
PMIO_E_BrdpDuplicateHandle

Error name
BrdpDuplicateHandle

Cause
None.

677
3 ERROR CODES

Solution
None.

3.25.9 5209
BRDP session already open

Error ID
PMIO_E_BrdpSessionAlreadyOpened

Error name
BrdpSessionAlreadyOpened

Cause
None.

Solution
None.

3.25.10 5210
BRDP split message was received

Error ID
PMIO_E_BrdpSplitMessageError

Error name
BrdpSplitMessageError

Cause
None.

Solution
None.

3.25.11 5211
IOM type mismatch

Error ID
PMIO_E_FwIomMismatchError

Error name
FwIomMismatchError

Cause
None.

678 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.25.12 5212
BRDP session already open

Error ID
PMIO_E_FwSessionTimeoutError

Error name
FwSessionTimeoutError

Cause
None.

Solution
None.

3.25.13 5213
Error in programming flash

Error ID
PMIO_E_FlashProgramError

Error name
FlashProgramError

Cause
None.

Solution
None.

3.25.14 5214
Error in erasing flash

Error ID
PMIO_E_FlashEraseError

Error name
FlashEraseError

Cause
None.

679
3 ERROR CODES

Solution
None.

3.25.15 5215
Firmware type mismatch

Error ID
PMIO_E_FwFirmwareMismatchError

Error name
FwFirmwareMismatchError

Cause
None.

Solution
None.

680 www.honeywell.com
 3 ERROR CODES

3.26 Codes 5300 to 5341

Related topics
“5300” on page 682
“5301” on page 682
“5302” on page 682
“5303” on page 683
“5304” on page 683
“5305” on page 683
“5306” on page 684
“5307” on page 684
“5308” on page 684
“5309” on page 685
“5310” on page 685
“5311” on page 685
“5312” on page 686
“5313” on page 686
“5314” on page 686
“5315” on page 687
“5316” on page 687
“5317” on page 687
“5318” on page 688
“5319” on page 688
“5320” on page 688
“5321” on page 689
“5322” on page 689
“5323” on page 689
“5324” on page 690
“5325” on page 690
“5326” on page 690
“5327” on page 691
“5328” on page 691
“5329” on page 691
“5330” on page 692
“5331” on page 692
“5332” on page 692
“5333” on page 693
“5334” on page 693
“5335” on page 693
“5336” on page 694
“5337” on page 694
“5338” on page 694
“5339” on page 695
“5340” on page 695
“5341” on page 695

681
3 ERROR CODES

3.26.1 5300
IOP does not exist.

Error ID
PMIO_E_AppNonExistentIop

Error name
NonExistentIOP

Cause
I/O Link Interface Module (IOLIM) cable is not installed, Process Manager I/O power supply is turned Off, or
I/O Processor (IOP) is not installed.

Solution
Install IOLIM cable, turn On Process Manager I/O power supply, or install IOP in correct card file slot.

3.26.2 5301
IOLIM or C300 IOLINK not online.

Error ID
PMIO_E_AppNotOnline

Error name
NotOnline

Cause
I/O Link Interface cable is not installed and/or Process Manager I/O power supply is turned Off.

Solution
Install I/O Link Interface cable and/or turn On Process Manager I/O power supply.

3.26.3 5302
IOP address mismatch.

Error ID
PMIO_E_AppIopAddrMismatch

Error name
IOPAddrMismatch

Cause
Configured wrong address through Control Builder configuration form or installed IOP in wrong card file slot.

682 www.honeywell.com
 3 ERROR CODES

Solution
Configure correct address or install IOP in correct slot.

3.26.4 5303
Invalid Link number.

Error ID
PMIO_E_AppBadLinkNum

Error name
BadLinkNum

Cause
None.

Solution
None.

3.26.5 5304
Request is not supported.

Error ID
PMIO_E_AppUnsuppReq

Error name
UnsuppReq

Cause
None.

Solution
None.

3.26.6 5305
Invalid function block number.

Error ID
PMIO_E_AppFbNum

Error name
FbNum

Cause
None.

683
3 ERROR CODES

Solution
None.

3.26.7 5306
Invalid IOP Number.

Error ID
PMIO_E_InvalidIopNumber

Error name
InvIopNum

Cause
None.

Solution
None.

3.26.8 5307
Invalid IOP type.

Error ID
PMIO_E_InvalidIopType

Error name
InvIopType

Cause
None.

Solution
None.

3.26.9 5308
Invalid IOP scan rate.

Error ID
PMIO_E_InvalidIopScanRate

Error name
InvIopRate

Cause
None.

684 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.10 5309
Invalid IOP-A position.

Error ID
PMIO_E_InvalidIopAPosition

Error name
InvIopAPos

Cause
None.

Solution
None.

3.26.11 5310
Invalid IOP-B position

Error ID
PMIO_E_InvalidIopBPosition

Error name
InvIopBPos

Cause
None.

Solution
None.

3.26.12 5311
Unexpected IOP-B position.

Error ID
PMIO_E_UnexpectedIopBPosition

Error name
UnexIopBPos

Cause
None.

685
3 ERROR CODES

Solution
None.

3.26.13 5312
IOP-A and IOP-B have the same position.

Error ID
PMIO_E_IopAPositionSameAsIopBPosition

Error name
IopSamePos

Cause
None.

Solution
None.

3.26.14 5313
Cannot change IOP number.

Error ID
PMIO_E_CannotChangeIopNumber

Error name
ChgIopNum

Cause
None.

Solution
None.

3.26.15 5314
Cannot change IOP type.

Error ID
PMIO_E_CannotChangeIopType

Error name
ChgIopType

Cause
None.

686 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.16 5315
Cannot delete redundant IOP while on process.

Error ID
PMIO_E_CannotDeleteIopRedunOnProcess

Error name
DelIopNRdn1

Cause
None.

Solution
None.

3.26.17 5316
Cannot delete redundant IOP with Primary IOP-B.

Error ID
PMIO_E_CannotDeleteIopRedunPriIopB

Error name
DelIopNRdn2

Cause
None.

Solution
None.

3.26.18 5317
Cannot add redundant IOP while on process.

Error ID
PMIO_E_CannotAddIopRedunOnProcess

Error name
AddIopRdn

Cause
None.

687
3 ERROR CODES

Solution
None.

3.26.19 5318
Cannot change IOP-A position while on process.

Error ID
PMIO_E_CannotChangeIopAPositionOnProcess

Error name
ChgIopAPos

Cause
None.

Solution
None.

3.26.20 5319
Cannot change IOP-B position while on process.

Error ID
PMIO_E_CannotChangeIopBPositionOnProcess

Error name
ChgIopBPos

Cause
None.

Solution
None.

3.26.21 5320
annot change IOP scan rate while on process.

Error ID
PMIO_E_CannotChangeIopScanRateOnProcess

Error name
ChgIopRate

Cause
None.

688 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.22 5321
Both specified IOP locations are currently occupied.

Error ID
PMIO_E_BothIopLocationsOccupied

Error name
BothLocOccupied

Cause
None.

Solution
None.

3.26.23 5322
Specified IOP-A location is currently occupied.

Error ID
PMIO_E_IopALocationOccupied

Error name
IopALocOccupied

Cause
None.

Solution
None.

3.26.24 5323
Specified IOP-B location is currently occupied.

Error ID
PMIO_E_IopBLocationOccupied

Error name
IopBLocOccupied

Cause
None.

689
3 ERROR CODES

Solution
None.

3.26.25 5324
IOP is in an invalid configuration state.

Error ID
PMIO_E_IopInInvalidCnfgState

Error name
IopInvCnfgState

Cause
None.

Solution
None.

3.26.26 5325
IOP-A is not present or configuration mismatch.

Error ID
PMIO_E_IopAIsMissingOrNotAvail

Error name
IopAAbsent

Cause
None.

Solution
None.

3.26.27 5326
IOP-B is not present or configuration mismatch.

Error ID
PMIO_E_IopBIsMissingOrNotAvail

Error name
IopBAbsent

Cause
None.

690 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.28 5327
Both IOPs are not present or configuration mismatch.

Error ID
PMIO_E_BothIopIsMissingOrNotAvail

Error name
BothIopAbsent

Cause
None.

Solution
None.

3.26.29 5328
Cannot swap primary IOP with FTA present to secondary IOP with FTA absent.

Error ID
PMIO_E_CannotSwapNoSecFta

Error name
NoSecFta

Cause
None.

Solution
None.

3.26.30 5329
Cannot compact/purge application database.

Error ID
PMIO_E_CannotCompPurgeApp

Error name
CannotCompPurgeApp

Cause
None.

691
3 ERROR CODES

Solution
None.

3.26.31 5330
Invalid IOP Command.

Error ID
PMIO_E_InvalidIopCmd

Error name
InvIopCmd

Cause
None.

Solution
None.

3.26.32 5331
Cannot perform operation in presence of synchronizing/synchronized secondary.

Error ID
PMIO_E_InvalidNvsLockCmd

Error name
InvNvsLockCmd

Cause
None.

Solution
None.

3.26.33 5332
Configuration changes not allowed when compaction/application purge command is enabled.

Error ID
PMIO_E_NvsLocked

Error name
NvsLocked

Cause
None.

692 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.34 5333
Value can only be changed by reloading the IOP block.

Error ID
PMIO_E_MustReloadIop

Error name
MustReloadIop

Cause
None.

Solution
None.

3.26.35 5334
Insufficient Memory Available in IOLIM.

Error ID
PMIO_E_InsufficientMemoryAvailableInIOLIM

Error name
InsufficientMemoryAvailableInIOLIM

Cause
None.

Solution
None.

3.26.36 5335
Invalid parameter connection. AO/DO connections to multiple controllers not supported.

Error ID
PMIO_E_InvalidParameterConnection

Error name
InvalidParameterConnection

Cause
None.

693
3 ERROR CODES

Solution
None.

3.26.37 5336
Channel block is not loaded in controller.

Error ID
PMIO_E_ChannelNotLoadedInController

Error name
ChannelNotLoadedToController

Cause
None.

Solution
None.

3.26.38 5337
Operation cannot be performed on a loaded channel block.

Error ID
PMIO_E_CannotPerformOpOnLoadedChannel

Error name
CannotPerformOpOnLoadedChannel

Cause
None.

Solution
None.

3.26.39 5338
Cannot change IOLink type with the loaded or assigned IOMs

Error ID
PMIO_E_CannotChangeTypeWhileIOMsLoaded

Error name
CannotChangeTypeWhileIOMsLoaded

Cause
None.

694 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.26.40 5339
Value can only be changed by reloading with IOLink block

Error ID
PMIO_E_MustReloadIolink

Error name
MustReloadIolink

Cause
None.

Solution
None.

3.26.41 5340
Cannot change IOLink type while Not Active Sup Soft Failure is asserted.

Error ID
PMIO_E_CannotChangeTypeWhileNotActiveSup

Error name
CannotChangeTypeWhileNotActiveSup

Cause
None.

Solution
None.

3.26.42 5341
Cannot delete when IOLink Not Active Sup Soft Failure is asserted.

Error ID
PMIO_E_CannotDeleteWhileNotActiveSup

Error name
CannotDeleteWhileNotActiveSup

Cause
None.

695
3 ERROR CODES

Solution
None.

696 www.honeywell.com
 3 ERROR CODES

3.27 Codes 5601 to 5602

Related topics
“5601” on page 697
“5602” on page 697

3.27.1 5601
Not supported in simulation.

Error ID
PMIO_SIM_E_NotSupportedInSimulation

Error name
NotSupportedInSimulation

Cause
None.

Solution
None.

3.27.2 5602
Invalid Sim value in connection.

Error ID
PMIO_SIM_E_InvalidSimValueConnection

Error name
InvalidSimValueConnection

Cause
None.

Solution
None.

697
3 ERROR CODES

3.28 Codes 6001 to 6021

Related topics
“6001” on page 698
“6002” on page 698
“6003” on page 699
“6004” on page 699
“6005” on page 700
“6006” on page 700
“6007” on page 700
“6008” on page 701
“6009” on page 701
“6010” on page 701
“6011” on page 702
“6012” on page 702
“6013” on page 702
“6014” on page 703
“6015” on page 703
“6016” on page 703
“6017” on page 704
“6018” on page 704
“6019” on page 704
“6020” on page 705
“6021” on page 705

3.28.1 6001
DSB configuration cannot be changed.

Error ID
CodeDSBConfigCannotBeChanged

Error name
DSBConfigCannotBeChanged

Cause
A parameter is being changed which cannot be changed while a PDA connection exists to a PDC of the DSB
block. You cannot change DSB configuration parameters when a PIOMB is associated with it.

Solution
Inactivate and disassociate any PIOMBs which refer to PDCs of this DSB.

3.28.2 6002
You cannot change a PDC channel output value when there is a PDA connection.

698 www.honeywell.com
 3 ERROR CODES

Error ID
CodeDSBOutputsAreConnected

Error name
DSBOutputsAreConnected

Cause
You attempted to directly write an output value from the DSB configuration form when a control strategy
already has a connection to the specific PDC.

Solution
• Change the output value from the PIOMB channel.
• Inactivate and disassociate any PIOMBs which refer to PDCs of this DSB so that the value can be changed
directly.

3.28.3 6003
Certain parameters cannot be changed if the PDC channel has not been configured.

Error ID
CodeDSBChannelNotConfigured

Error name
DSBChannelNotConfigured

Cause
You attempted to change a PDC channel value on a channel that was not configured or was configured
incorrectly.

Solution
Configure all required parameters of the PDC channel and reload the DSB.

3.28.4 6004
You cannot load a DSB FB while synchronization is in progress.

Error ID
CodeDSBCannotLoadSyncInProgress

Error name
DSBSyncInProg

Cause
To prevent race condition between DSB FB load and DSB FB initial synchronization, the load operation is
prevented per DSB FB if DSB initial-synchronization is in progress. This is a transient condition as it takes on
the order of 1 or 2 seconds to initial synchronize the DSB FB at which time load is possible.

Solution
Retry the DSB load operation a couple of seconds later.

699
3 ERROR CODES

3.28.5 6005
You cannot change data values for input channels, only outputs.

Error ID
CodeDSBInptValCannotBeChanged

Error name
DSBInptValCannotBeChanged

Cause
You attempted to change a PDC channel value for an input channel.

Solution
None. Input channels values cannot be changed from the DSB configuration form.

3.28.6 6006
You attempted to load a Generic Drive DSB with only one PKW PDC configured.

Error ID
CodeDriveDSBNeedTwoPKWPDCs

Error name
DriveDSBNeedTwoPKWPDCs

Cause
For read/write PKW processing to work, you must configure both an input and an output PKW PDC.

Solution
Configure an additional PDC, either for the input or the output PKW, as required.

3.28.7 6007
Initial synchronization of a redundant PGM pair has failed while synchronizing the PDC data.

Error ID
CodePDCInitialSyncFail

Error name
PDCInitialSyncFail

Cause
Unsupported migration path or internal PGM error.

Solution
None

700 www.honeywell.com
 3 ERROR CODES

3.28.8 6008
PDC Type validation.

Error ID
CodeDSBInvalidPdcType

Error name
DSBInvalidPdcType

Cause
When manually storing PDC output values, the stores are rejected with this error code if the PDC Type is not
configured as the appropriate analog/digital output type.

Solution
Reconfigure the DSB FBs PDC Type.

3.28.9 6009
The selected PDCType/ChannelType combination is incompatible.

Error ID
CodeDSBPDCChanTypeMismatch

Error name
DSBPDCChanTypeMismatch

Cause
You were somehow able to configure an invalid PDC channel.

Solution
Reconfigure the offending channel to have a channel type that is consistent with the PDC Type. For example, an
'AI Module' PDC should have AI channels.

3.28.10 6010
The selected ChannelType/ChDataType combination is incompatible.

Error ID
CodeDSBChanDataTypeMismatch

Error name
DSBChanDataTypeMismatch

Cause
You were somehow able to configure an invalid PDC channel.

701
3 ERROR CODES

Solution
Reconfigure the offending channel to have a channel data type that is consistent with the channel type. For
example, a DI channel should have a data type of 'BOOLEAN.'

3.28.11 6011
Insufficient memory resource in application pool to instantiate Device Support Block.

Error ID
CodeDSBCannotLoadOutOfMemory

Error name
DSBCannotLoadOutOfMemory

Cause
Too many DSB blocks.

Solution
Some DSB blocks must be removed or moved to another controller.

3.28.12 6012
Tools and Controller firmware are incompatible.

Error ID
CodeDSBInvalidBlockType

Error name
DSBInvalidBlockType

Cause
Controller does not support the block type.

Solution
Update controller firmware.

3.28.13 6013
Indicates that the PGM block is not currently loaded to the controller.

Error ID
CodePGMFBNotLoaded

Error name
PGMFBNotLoaded

Cause
The Protocol Block load cannot be initiated until after the PGM block has been loaded.

702 www.honeywell.com
 3 ERROR CODES

Solution
Ensure that the PGM block has been loaded before retrying the operation.

3.28.14 6014
Indicates that the Protocol Block is not currently loaded to the controller.

Error ID
CodePBLINKFBNotLoaded

Error name
PBLINKFBNotLoaded

Cause
The DSB FB load cannot be initiated until after the Protocol Block has been loaded.

Solution
Ensure that the Protocol Block has been loaded before retrying the operation.

3.28.15 6015
Indicates that the PDC Type that is being loaded has already been configured for that segment.

Error ID
CodeASiDSBPDCTypeInUse

Error name
ASiDSBPDCTypeInUse

Cause
There can only be one of each PDC Type configured for each of the two possible AS-i segments. For example, a
PDC Type of 'Slaves 1-7 inputs' can be configured twice; once for segment 1 and once for segment 2.

Solution
Change either the PDC Type or AS-i Segment so that the combination is unique and then reload the DSB.

3.28.16 6016
Indicates that a low and high range value was loaded such that one was NaN but the other was not.

Error ID
CodeOnlyOneNaNRange

Error name
OnlyOneNaNRange

Cause
A high and low range pair was not both NaN.

703
3 ERROR CODES

Solution
Either change range values so that both are valid numbers where LowRange < HighRange or change them such
that LowRange = HighRange = NaN.

3.28.17 6017
One or more of the user configurable alarms for this DSB has a PDC number configured that does not
correspond to an input PDC.

Error ID
CodeDriveDSBAlarmNotInput

Error name
DriveDSBAlarmNotInput

Cause
A user configurable alarm is configured for a non-input PDC. Any alarms configured in this manner will not
work. It is only valid for alarms based on data from an input PDC.

Solution
Examine the user configurable alarms to determine which ones have non-input PDC numbers. Then, either
remove the alarm or configure a valid PDC number (for an input PDC).

3.28.18 6018
Indicates that a Generic Drive DSB was loaded which has more than one input or output PPO PDC type.

Error ID
CodeTooManyPPOPDCs

Error name
TooManyPPOPDCs

Cause
More than one input or output PPO PDC is configured. However, only one input and one output is supported.

Solution
Remove the offending extra PPO PDC.

3.28.19 6019
Indicates that a Generic Drive DSB was loaded which has two PPO PDCs configured where the input is of one
type (for example 4) and the output is of a different type (for example 5).

Error ID
CodeMismatchedPPOTypes

Error name
MismatchedPPOTypes

704 www.honeywell.com
 3 ERROR CODES

Cause
Mismatch of PPO type for the input/output PPO PDCs.

Solution
Change the type of the input/output PPO PDCs so that they match (for example, PPO type 1 drive should have a
PPO type 1 input and a PPO type 1 output).

3.28.20 6020
Indicates that a Generic Drive DSB was loaded which has either PPO type 3 or PPO type 4 PDCs configured, as
well as PKW PDCs configured.

Error ID
CodePKWNotSupported

Error name
PKWNotSupported

Cause
Only PPO types 1, 2, and 5 support acyclic parameter access via the PKW area.

Solution
• Change the PPO type of the DSB (by changing the module configuration and also changing the PPO PDC
types)
• Remove the PKW PDCs.

3.28.21 6021
This error is generated when the user tries to load the DSB block without defining the byte order of the slave
device.

Error ID
EXPKS_E_DSBByteOrderNotSelected

Error name
DSBByteOrderNotSelected

Cause
The byte order of the slave device is not defined while configuring the DSB.

Solution
Select the byte order of the slave device. You can select either the little-endian format or the big-endian format.
This selection is dependent on the slave device that is used. Note that most of the PROFIBUS devices use the
big-endian format.

705
3 ERROR CODES

3.29 Codes 7001 to 7063

Related topics
“7001” on page 707
“7002” on page 707
“7003” on page 708
“7004” on page 708
“7005” on page 708
“7006” on page 709
“7007” on page 709
“7008” on page 709
“7009” on page 710
“7010” on page 710
“7011” on page 710
“7012” on page 711
“7013” on page 711
“7014” on page 712
“7015” on page 712
“7016” on page 712
“7017” on page 713
“7018” on page 713
“7019” on page 713
“7020” on page 714
“7021” on page 714
“7022” on page 714
“7023” on page 715
“7024” on page 715
“7025” on page 715
“7026” on page 716
“7027” on page 716
“7028” on page 716
“7029” on page 717
“7030” on page 717
“7031” on page 717
“7032” on page 718
“7033” on page 718
“7034” on page 718
“7035” on page 719
“7036” on page 719
“7037” on page 719
“7038” on page 720
“7039” on page 720
“7040” on page 720
“7041” on page 721
“7042” on page 721
“7043” on page 721
“7044” on page 722

706 www.honeywell.com
 3 ERROR CODES

“7045” on page 722

“7046” on page 722
“7047” on page 723
“7048” on page 723
“7049” on page 724
“7050” on page 724
“7051” on page 724
“7052” on page 725
“7053” on page 725
“7054” on page 725
“7055” on page 726
“7056” on page 726
“7057” on page 726
“7058” on page 727
“7060” on page 727
“7061” on page 727
“7062” on page 728
“7063” on page 728

3.29.1 7001
Error text string too long.

Error ID
CodeText

Error name
CodeText

Cause
Returned text string is longer than its allocated string length. It can occur with the request for the following
strings: error code text, parameter name within a list, enumeration within a set, or enumeration.

Solution
This is a warning that may be ignored. If the parameter name or enumeration is to be used as input and has been
truncated, the truncated form will not be recognized. No parameter names or enumerations should fall into this
category.

3.29.2 7002
Could not process acyclic response data.

Error ID
CodeDCMemory

Error name
CodeDCMemory

707
3 ERROR CODES

Cause
Memory could not be allocated for an internal memory structure within the CDA Server.

Solution
Close all non-necessary applications on the workstation.

3.29.3 7003
Could not process acyclic response item.

Error ID
CodeItemMemory

Error name
CodeItemMemory

Cause
Memory could not be allocated for an internal memory structure within the CDA Server.

Solution
Close all non-necessary applications on the workstation.

3.29.4 7004
Could not send request to controller.

Error ID
CodeTransortDidNotSend

Error name
CodeTransortDidNotSend

Cause
CDA could not send the request.

Solution
Retry. Shut down and restart CDA server if necessary.

3.29.5 7005
Parameter not found in database

Error ID
CodeBadHandleFromSR

Error name
CodeBadHandleFromSR

708 www.honeywell.com
 3 ERROR CODES

Cause
Scatter list is bad.

Solution
1. Retry the load, if unsuccessful, continue with the following steps.
2. Make Server (A) primary if available.
3. Reboot ERDB-Server (B).
4. Resync servers and then retry the load.
5. IMPACT: No loads will be possible to any controller until this workaround is applied.

3.29.6 7006
Invalid Enumeration Ordinal or String.

Error ID
CodeInvalidEnum

Error name
CodeInvalidEnum

Cause
Invalid enumeration value detected while attempting to put data as a real, integer, or double.

Solution
Correct enumeration value, must be a positive number.

3.29.7 7007
Connection Could not be established to controller.

Error ID
CodeConnNotEstablished

Error name
CodeConnNotEstablished

Cause
CDA could not establish a connection to the controller.

Solution
Retry.

3.29.8 7008
Connection Timed Out

Error ID
CodeConnectionTimedOut

709
3 ERROR CODES

Error name
CodeConnectionTimedOut

Cause
Not used.

Solution
None

3.29.9 7009
The Server application is not running.

Error ID
CodeSrvNotInitialized

Error name
CodeSrvNotInitialized

Cause
CDA initialization could not find the handle to the pipe that it just created. This error code will also be returned
if the stubbed CDA DLL is used.

Solution
Retry and/or verify that the correct CDA has been installed.

3.29.10 7010
Lost communication with the CDA Server.

Error ID
CodeServerDied

Error name
CodeServerDied

Cause
Caused by internal CDA Server fatal error and reported by client applications.

Solution
Restart the CDA Server.

3.29.11 7011
Controller is out of memory.

Error ID
CodePCMMemoryError

710 www.honeywell.com
 3 ERROR CODES

Error name
CodePCMMemoryError

Cause
Insufficient memory to store request in rCOA

Solution
If the controller is overloaded with Publish/Subscribe (PUB/SUB) requests, it degrades to Request/Response
requests. If the controller is overloaded with Request/Response requests beyond the degrade capability, the 7011
error occurs.
To recover from this error, delete the strategies that contain PUB/SUB requests.
To ensure that an alarm is raised when the controller is overloaded, you can monitor the Request-Response
Degradation Alarm parameter (RDEGRADALM) for each controller CEE. Setting this parameter ensures that
an alarm is raised automatically when the controller is overloaded, and also indicates that there has been a
transition from PUB/SUB to Request/Response.

3.29.12 7012
Client-initiated CDA Operation timed out.

Error ID
CodeOperationTimedOut

Error name
CodeOperationTimedOut

Cause
No response from CDA server, operation timed out.

Solution
Retry.

3.29.13 7013
The actual data type does not match the expected data type.

Error ID
CodeDataTypeMismatch

Error name
CodeDataTypeMismatch

Cause
Request for data resulted in a mismatch of actual and expected data types. Compatibility check while attempting
a put of variant data type did not match current or desired data type

Solution
Correct data type and retry.

711
3 ERROR CODES

3.29.14 7014
Error string, including short and long strings, too long.

Error ID
CodeFull

Error name
CodeFull

Cause
This error code is caused by a returned full text string that is longer than its allocated string length. It can occur
with the request for the following strings: error code text, parameter name within a list, or enumeration within a
set.

Solution
This is a warning, and may be ignored. If the parameter name or enumeration is to be used as output and has
been truncated, the truncated form will not be recognized. There should not be any parameter names or
enumerations that fall into this category.

3.29.15 7015
Test string too long to be written into allocated memory

Error ID
CodeStringTooLong

Error name
CodeStringTooLong

Cause
This error code occurs when a request for error code text results in both (short and full) returned text strings that
are longer than their allocated string lengths. It also occurs when a request for data as text results in a string that
is longer than its allocated memory.

Solution
This is only a warning, ignore for error code text string requests. Allocate more memory for the string and retry
if this occurs while requesting data as text.

3.29.16 7016
SR failed to initialize, may not be installed.

Error ID
CodeSRNotInitialized

Error name
CodeSRNotInitialized

712 www.honeywell.com
 3 ERROR CODES

Cause
Attempt to initialize SR failed.

Solution
Verify that SR is installed and running. Retry.

3.29.17 7017
Invalid Boolean Value

Error ID
CodeInvalidBool

Error name
CodeInvalidBool

Cause
Detected invalid Boolean value while attempting to put data as text, valid Boolean values include: True, False,
On, Off.

Solution
Correct request to use a valid Boolean value and retry.

3.29.18 7018
Pipe between the client application and the Server has been broken.

Error ID
CodeBrokenPipe

Error name
CodeBrokenPipe

Cause
Connection to client has been broken, could not connect to a pipe, or set the named pipe handle state.
CDA server may have been shut down, mail slot file may have failed or handle may be corrupt.

Solution
Retry.

3.29.19 7019
Data value could not be converted into the type specified by the client

Error ID
CodeNotNativeType

713
3 ERROR CODES

Error name
CodeNotNativeType

Cause
Data put or type requested cannot be converted with the requested value.

Solution
Correct value or data type and retry.

3.29.20 7020
Default, Initialized CDA Error Code, No Active Status.

Error ID
CodeCDANull

Error name
CodeCDANull

Cause
This initialized default status value should only be seen when no active status has been determined.

Solution
None

3.29.21 7021
Could not get parameter value from SR.

Error ID
CodeSRValueError

Error name
CodeSRValueError

Cause
Attempted to read parameter from the System Repository, but the SR does not recognize the parameter.

Solution
Correct the name of the requested parameter and retry.

3.29.22 7022
Not allowed to write to a SR Parameter while monitoring

Error ID
CodeSRWriteDisallowed

714 www.honeywell.com
 3 ERROR CODES

Error name
CodeSRWriteDisallowed

Cause
Attempted to write to a SR resident parameter while monitoring.

Solution
Do not write to SR resident parameters while monitoring, use request/response

3.29.23 7023
CDA responder received bad sized request.

Error ID
CodeCorruptMessage

Error name
CodeCorruptMessage

Cause
Requested parameter is obsolete.

Solution
Correct parameter and retry.

3.29.24 7024
SR returned invalid value for SR resident parameter.

Error ID
CodeSRNoValue

Error name
CodeSRNoValue

Cause
No value returned for this parameter from SR.

Solution
Correct requested parameter and retry.

3.29.25 7025
Could not free memory allocated by the client application.

Error ID
CodeGlobalFreeError

715
3 ERROR CODES

Error name
CodeGlobalFreeError

Cause
Memory could not be freed while attempting to de-allocate memory.

Solution
Shut down the client containing this cdadll.dll and retry.

3.29.26 7026
Client application specified invalid parameters to CDA call.

Error ID
CodeParamCheckFailed

Error name
CodeParamCheckFailed

Cause
One of the requested parameters is invalid.

Solution
Correct the parameter list and retry.

3.29.27 7027
Could not convert Parameter Names to Handles.

Error ID
CodeHandleConvFailed

Error name
CodeHandleConvFailed

Cause
The SR resident parameter name requested could not be converted to a handle.

Solution
Correct requested parameter and retry.

3.29.28 7028
Could not get the list of parameters of an Independent Block from SR.

Error ID
CodeSRParamListError

716 www.honeywell.com
 3 ERROR CODES

Error name
CodeSRParamListError

Cause
The attempt to get list of SR resident parameters using the Control Module Name failed.

Solution
Correct parameter name and retry

3.29.29 7029
Could not get the list of Enumeration Strings in an Enumeration Set from SR.

Error ID
CodeSREnumSetError

Error name
CodeSREnumSetError

Cause
The attempt to get list of SR resident enumeration strings using a parameter name failed.

Solution
Correct parameter name and retry.

3.29.30 7030
SR could not convert the string into an enumeration ordinal.

Error ID
CodeEnumOrdConvFailed

Error name
CodeEnumOrdConvFailed

Cause
The attempt to convert SR resident enumeration string to an ordinal failed.

Solution
Correct parameter name or enumeration string and retry.

3.29.31 7031
SR could not convert the ordinal into an enumeration string.

Error ID
CodeEnumStrConvFailed

717
3 ERROR CODES

Error name
CodeEnumStrConvFailed

Cause
The attempt to convert SR resident ordinal into an enumeration string failed.

Solution
Correct parameter name or ordinal and retry.

3.29.32 7032
The data type of the parameter is not recognized by this version.

Error ID
CodeUnknownDataType

Error name
CodeUnknownDataType

Cause
Possibly incompatible versions of Experion PKS used or corrupted data are being returned.

Solution
Ensure that Experion PKS was installed correctly.

3.29.33 7033
Memory could not be allocated for the operation requested by the client.

Error ID
CodeOperFailedMemErr

Error name
CodeOperFailedMemErr

Cause
Failed to allocate memory.

Solution
Shut down client containing this cdadll.dll and retry.

3.29.34 7034
SR returned invalid Type for SR report parameter.

Error ID
CodeSrInvalidType

718 www.honeywell.com
 3 ERROR CODES

Error name
CodeSrInvalidType

Cause
Parameter type returned from SR is invalid.

Solution
Correct parameter name and retry

3.29.35 7035
Invalid Block ID parameter value.

Error ID
CodeInvalidBlockID

Error name
CodeInvalidBlockID

Cause
None.

Solution
None.

3.29.36 7036
Could not get range information from System Repository.

Error ID
CodeGetRangeInfoFailed

Error name
CodeGetRangeInfoFailed

Cause
None.

Solution
None.

3.29.37 7037
Parameter has no residency.

Error ID
CodeNonResidentParam

719
3 ERROR CODES

Error name
CodeNonResidentParam

Cause
None.

Solution
None.

3.29.38 7038
Notification of on-process migration state change failure.

Error ID
CodeNotifyOPMStateChangeFailed

Error name
CodeNotifyOPMStateChangeFailed

Cause
None.

Solution
None.

3.29.39 7039
Cannot write to Template Defined parameter.

Error ID
CodeTemplDefndParamStoreIllegal

Error name
CodeTemplDefndParamStoreIllegal

Cause
None.

Solution
None.

3.29.40 7040
Failed to construct Relative Path to the target.

Error ID
CdaFailedToBuildRelativePath

720 www.honeywell.com
 3 ERROR CODES

Error name
CdaFailedToBuildRelativePath

Cause
None.

Solution
None.

3.29.41 7041
This type of Peer-to-Peer connection is not supported.

Error ID
CdaUnsupportedP2PConnection

Error name
CdaUnsupportedP2PConnection

Cause
None.

Solution
None.

3.29.42 7042
Failed to construct Communication Path for the module.

Error ID
CdaConstructCommPathFailed

Error name
CdaConstructCommPathFailed

Cause
None.

Solution
None.

3.29.43 7043
CDA server to Global Communication Layer (GCL) connection is pending

Error ID
CdaGCLConnPending

721
3 ERROR CODES

Error name
CdaGCLConnPending

Cause
None.

Solution
None.

3.29.44 7044
Datasize of datacontainer doesn't match the datasize of the request.

Error ID
CdaDatasizeMismatch

Error name
CdaDatasizeMismatch

Cause
This is reported when the parameter size (of the parameter being read) specified in the database is less than the
size of the data as filled in by the data owner. For example: if the size of a string parameter XYZ_STRING as
defined in the database is 80 characters (maximum) but the data owner is trying to provide a value of, say, 85
characters, you would see this error.

Solution
Change the size of the data, as applicable.

3.29.45 7045
Indicates that the Win32 Platform Block does not exist, and must be reloaded.

Error ID
CdaWin32EnvDoesNotExist

Error name
CdaWin32EnvDoesNotExist

Cause
This error is generated only for Win32 environments (ACE, SIM-ACE, EHG, SIM-EHG, OPC Gateway, SIM-
C300, SIMIOLIM, and so on). This error indicates that the Win32 Platform Block does not exist, and must be
reloaded.

Solution
Reload the Platform Block (ACE, and so on), with contents if applicable.

3.29.46 7046
Indicates that the original string is truncated.

722 www.honeywell.com
 3 ERROR CODES

Error ID
CdaStringTruncated

Error name
CdaStringTruncated

Cause
Trying to monitor a string which is longer than what the CDA Server allocates for monitoring strings. The string
is displayed with an ellipsis (. . . ) at the end of the truncated string.

Solution
Reduce the length of the monitored string.

3.29.47 7047
Bad Ethernet or ControlNet driver ID when constructing communications path.

Error ID
CdaInvalidDriverId

Error name
CdaInvalidDriverId

Cause
An invalid Ethernet or ControlNet driver ID was provided to construct the communications path.

Solution
Provide the correct driver ID to construct the communications path. If importing CPMs/FIMs/IOLIMs on a
FTEB system make sure the associated FTEB already exists in the ERDB.

3.29.48 7048
Unable to locate associated FTE Bridge or ControlNet driver ID used to construct the communications path.

Error ID
CdaGetDriverIdFail

Error name
CdaGetDriverIdFail

Cause
The MaxDrivers() DTL call may have failed or matching driver ID for the driver name could not be located.

Solution
If importing CPMs/FIMs/IOLIMs on a FTEB system make sure the associated FTEB already exists in the
ERDB and verify that the ER service is running. .

723
3 ERROR CODES

3.29.49 7049
Invalid network type. Only ControlNet , Ethernet, and Fault Tolerant Ethernet (FTE) network types are
supported

Error ID
CdaInvalidNetworkType

Error name
CdaInvalidNetworkType

Cause
Product must have been installed as other network type.

Solution
Fix the registry or product installation. For example, you cannot use FTEBs on system installed as a ControlNet
system.

3.29.50 7050
Invalid path length was provided when constructing communications path.

Error ID
CdaInvalidPathLength

Error name
CdaInvalidPathLength

Cause
Path length can only be 2 or 4 segments for both ControlNet and Ethernet systems.

Solution
None. Check the path.

3.29.51 7051
Failed to get IP address of the driver.

Error ID
CdaGetIPAddressFail

Error name
CdaGetIPAddressFail

Cause
Network error; driver may not be configured.

724 www.honeywell.com
 3 ERROR CODES

Solution
Configure the driver, if not already configured.

3.29.52 7052
Failed to initialize the library using INT_HPL().

Error ID
CdaDtLInitHplFailed

Error name
CdaDtLInitHplFailed

Cause
The DTL32.dll or DTE.dll may be missing.

Solution
Verify if DTL32.dll (CNET) or DTLE.dll exists on the system.

3.29.53 7053
Failed to obtain the driver list using DTL_DRIVER_LIST_EX()

Error ID
CdaDtLDriverListFailed

Error name
CdaDtLDriverListFailed

Cause
If using DTLE, verify that connection to ERDB is Okay.

Solution
None

3.29.54 7054
Failed to obtain the mapping information for the driver using DTL_GET_MAPPING_INFO().

Error ID
CdaDtLGetMappingInfoFailed

Error name
CdaDtLGetMappingInfoFailed

Cause
The DTL call GET_MAPPING_INFO() failed.

725
3 ERROR CODES

Solution
None

3.29.55 7055
Client Called GUninitialize and explicitly requested CDA Client to disconnect from CDA Server

Error ID
CdaDisconnectComplete

Error name
DisconnectComplete

Cause
GDAMngr Disconnect and reconnect sequence results in CDA Server crash

Solution
None

3.29.56 7056
Failed to store or get data from the controller

Error ID
CdaDataSizeExceedsMaxLimit

Error name
DataSizeExceedsMaxLimit

Cause
Client tried to store or get data that cannot fit into a single CDA message from a controller

Solution
Read or write data that meets storage size

3.29.57 7057
Failed to obtain the requested parameter units

Error ID
CodeGetUnitsFailed

Error name
GetUnitsFailed

Cause
GDAMngr Disconnect and reconnect sequence results in CDA Server crash

726 www.honeywell.com
 3 ERROR CODES

Solution
None

3.29.58 7058
Failed to allocate memory in GCL.

Error ID
CodeCDAGCLMemoryAllocationFailed

Error name
GCLMemoryAllocationFailed

Cause
Not enough free memory available.

Solution
None

3.29.59 7060
Failed to obtain the given name of CDA handle from System Repository.

Error ID
CodeBadNameFromSR

Error name
BadNameFromSR

Cause
System Repository service may not be running or has problems communicating with CDA.

Solution
None

3.29.60 7061
Failed to write parameter values into the Experion server.

Error ID
CodeWriteFailed

Error name
WriteFailed

Cause
Experion server may not be running or has problems communicating with CDA.

727
3 ERROR CODES

Solution
None

3.29.61 7062
Fail to read or write from/to the Experion server parameter.

Error ID
CodeExpServerError

Error name
ExpServerError

Cause
Specific cause can be viewed in the Experion server error log.

Solution
None

3.29.62 7063
When the Experion server role changes from primary to backup, the server displays this error during the
parameter update.

Error ID
CodeBackupExpServer

Error name
BackupExpServer

Cause
Experion server role is changed from primary to backup from primary. This is an internal error.

Solution
None.

728 www.honeywell.com
 3 ERROR CODES

3.30 Codes 8001 to 8066

Related topics
“8001” on page 730
“8002” on page 730
“8003” on page 730
“8004” on page 731
“8005” on page 731
“8006” on page 732
“8008” on page 732
“8009” on page 732
“8010” on page 733
“8011” on page 733
“8012” on page 733
“8013” on page 734
“8014” on page 734
“8015” on page 734
“8016” on page 735
“8017” on page 735
“8018” on page 735
“8019” on page 736
“8020” on page 736
“8021” on page 737
“8030” on page 737
“8031” on page 737
“8032” on page 738
“8034” on page 738
“8035” on page 738
“8036” on page 739
“8037” on page 739
“8038” on page 739
“8039” on page 740
“8040” on page 740
“8041” on page 740
“8042” on page 741
“8043” on page 741
“8044” on page 741
“8045” on page 742
“8046” on page 742
“8047” on page 742
“8048” on page 743
“8049” on page 743
“8050” on page 743
“8051” on page 744
“8052” on page 744
“8053” on page 744
“8054” on page 745

729
3 ERROR CODES

“8055” on page 745

“8060” on page 745
“8061” on page 746
“8062” on page 746
“8063” on page 746
“8064” on page 747
“8065” on page 747
“8066” on page 747

3.30.1 8001
Exception caught in <name>.

Error ID
kSrException

Error name
kSrException

Cause
An exception was thrown by the named routine and caught by SR. Probable causes are out of resource
condition, mismatched software versions, or software bug.

Solution
Correct resource problem, re-install software. If this fails, contact TAC.

3.30.2 8002
Failed to connect to the database.

Error ID
kSrConnectToDatabase

Error name
kSrConnectToDatabase

Cause
Database file (erdb_a.mdb) may be missing or not a valid file; or ODBC data source may not be set up; or
ErServer may not be running.

Solution
Check database, recover using DbAdmin if necessary. If R200, check that ErServer (Experion PKS ER Server
service) is running.

3.30.3 8003
Failed to create <name> thread.

730 www.honeywell.com
 3 ERROR CODES

Error ID
kSrCreateThread

Error name
kSrCreateThread

Cause
Call to Win NT 'CreateThread' function failed. Additional information should be found in the error log.

Solution
Contact TAC with reason for failure as documented in error log.

3.30.4 8004
Failed to load <name> module from database.

Error ID
kSrLoadCmFromDB

Error name
kSrLoadCmFromDB

Cause
The named tagged block was not found in the ER database and therefore SR was unable to load it. SR is
possibly out of date or there could be a mismatch between SR database and ERDB.

Solution
Try reloading block from CB to bring SR up to date. If this does not work, reboot NT Workstation to restart SR
and reload SR database.

3.30.5 8005
Failed to load <name> library from database.

Error ID
kSrLoadLibFromDB

Error name
kSrLoadLibFromDB

Cause
Requested library was not found in ER database. Most likely causes are a missing Custom Control Library
(CCL) or a mismatch between SR database and ERDB.

Solution
Reboot NT Workstation to restart SR and reload SR database.

731
3 ERROR CODES

3.30.6 8006
Failed to load <name> enumeration set from database.

Error ID
kSrLoadEnumFromDB

Error name
kSrLoadEnumFromDB

Cause
The named enumeration set was not found in the ER database and therefore SR was unable to load it.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.7 8008
Template <name> not found in library <name>.

Error ID
kSrNoBlockInLib

Error name
kSrNoBlockInLib

Cause
Unable to load base function block for self defining enumeration or a set of parameter values. Possibly a
mismatch between SR database and ERDB.

Solution
Reboot NT Workstation to restart SR and reload SR database.

3.30.8 8009
SR database is corrupted.

Error ID
kSrCorrupt

Error name
kSrCorrupt

Cause
Unable to locate base function block in SR database, indicating the database is corrupted.

732 www.honeywell.com
 3 ERROR CODES

Solution
Reboot NT Workstation to restart SR and reload SR database. TAC should be notified of the circumstances that
led to this error.

3.30.9 8010
Failed to create <name> query

Error ID
kSrCreateQuery

Error name
kSrCreateQuery

Cause
Unable to create an instance of an ERDB query. Query may be missing from ERDB, indicating incorrect
database version, or a corrupted ER database.

Solution
Verify ER database version is correct. Recover DB using DbAdmin if necessary.

3.30.10 8011
Library <name> is already in SR

Error ID
kSrLibExists

Error name
kSrLibExists

Cause
Warning. The named library that was requested to be added, already exists in the SR database.

Solution
None

3.30.11 8012
Library <name>could not be found in the database

Error ID
kSrLibNotInDB

Error name
kSrLibNotInDB

733
3 ERROR CODES

Cause
Requested library was not found in ER database. Most likely cause is missing Custom Control Library (CCL).

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.12 8013
Comm Path to module <name> is not in database.

Error ID
kSrCommPathNotInDB

Error name
kSrCommPathNotInDB

Cause
Custom Comm DLL Path for named hardware module is not in the ERDB.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.13 8014
Failed to initialize component <name>.

Error ID
kSrCompInit

Error name
kSrCompInit

Cause
Unable to initialize the named component block of a CM or SCM.

Solution
Name.

3.30.14 8015
Component <name> has a reference to non-existing library <name>.

Error ID
kSrNoLibRef

734 www.honeywell.com
 3 ERROR CODES

Error name
kSrNoLibRef

Cause
Unable to locate the library that corresponds to the named component.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.15 8016
Component <name> has a reference to non-existing template <name>.

Error ID
kSrNoTemplateRef

Error name
kSrNoTemplateRef

Cause
Template <library:name> not found for the named component.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.16 8017
Invalid index <name> for parameter <name>.

Error ID
kSrInvalidParIndex

Error name
kSrInvalidParIndex

Cause
Attempt to add or load a parameter value for parameter <name> using an invalid index.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.17 8018
Parameter <name> not found in template <name>.

735
3 ERROR CODES

Error ID
kSrInvalidPar

Error name
kSrInvalidPar

Cause
Parameter <name> does not exist in block template <name>.

Solution
A mismatch between SR database and ERDB. Correct by rebooting NT Workstation to restart SR and reload SR
database.

3.30.18 8019
Enumeration set defining parameter <name> is not in SR database.

Error ID
kSrDefiningPar

Error name
kSrDefiningPar

Cause
The parameter that defines a self-defining enumeration does not exist in the SR database. SR could be out of
date or there could be a mismatch between SR database and ERDB.

Solution
Try reloading block from CB to bring SR up to date. If this does not work, reboot NT Workstation to restart SR
and reload SR database.

3.30.19 8020
Cannot find parameter value for self-defining enumeration.

Error ID
kSrEnumParVal

Error name
kSrEnumParVal

Cause
The parameter value for a self-defining enumeration does not exist in the SR database. SR could be out of date
or there could be a mismatch between SR database and ERDB.

Solution
Try reloading block from CB to bring SR up to date. If this does not work, reboot NT Workstation to restart SR
and reload SR database.

736 www.honeywell.com
 3 ERROR CODES

3.30.20 8021
Duplicate parameter <name> in block <name>.

Error ID
kSrDuplicatePar

Error name
kSrDuplicatePar

Cause
While adding a parameter for a block to the SR database, a parameter of the same name was found to already
exist. SR could be out of date or there could be a mismatch between SR database and ERDB.

Solution
Try reloading block from CB to bring SR up to date. If this does not work, reboot NT Workstation to restart SR
and reload SR database.

3.30.21 8030
Failed to create <name> mailslot.

Error ID
kSrCreateMailslot

Error name
kSrCreateMailslot

Cause
Unable to create Mail Slot <name> used to communicate between SR's on different workstations.

Solution
See error log for additional information as to reason for failure.

3.30.22 8031
Mailslot write failed

Error ID
kSrMailslotWrite

Error name
kSrMailslotWrite

Cause
Unable to write to Mail Slot used to communicate between SR's on different workstations.

737
3 ERROR CODES

Solution
See error log for additional information as to reason for failure.

3.30.23 8032
Mailslot read failed.

Error ID
kSrMailslotRead

Error name
kSrMailslotRead

Cause
Unable to read from Mail Slot used to communicate between SR's on different workstations.

Solution
See error log for additional information as to reason for failure.

3.30.24 8034
Failed to respond to <name> on message <name>.

Error ID
kSrMailslotResp

Error name
kSrMailslotResp

Cause
Unable to send response on Mail Slot used to communicate between SR's on different workstations.

Solution
See error log for additional information as to reason for failure.

3.30.25 8035
Invalid message buffer pointer.

Error ID
kSrMessageBuf

Error name
kSrMessageBuf

Cause
An internal problem encountered while trying to send a message to an SR on another workstation.

738 www.honeywell.com
 3 ERROR CODES

Solution
Contact TAC with error log information.

3.30.26 8036
Failed to get workstation name.

Error ID
kSrWksName

Error name
kSrWksName

Cause
Unable to resolve workstation name.

Solution
SR Servide may not be correctly set up. Insure that all installation steps were followed.

3.30.27 8037
Invalid advise message received.

Error ID
kSrBadAdvise

Error name
kSrBadAdvise

Cause
Received an advise message that is not one of the known categories of message.

Solution
Contact TAC with error log information.

3.30.28 8038
Out of order message (<name>) received from <name>.

Error ID
kSrWrongMessageNum

Error name
kSrWrongMessageNum

Cause
A message may have been lost due to a network problem. Verify that the network connecting the workstations is
functioning correctly.

739
3 ERROR CODES

Solution
Repeat the procedure that resulted in the error, after the network problem was resolved.

3.30.29 8039
Failed to send mail message to <name>.

Error ID
kSrSendMail

Error name
kSrSendMail

Cause
Unable to send message on Mail Slot used to communicate between SR's on different workstations. The
<name> is the workstation name.

Solution
See error log for additional information as to reason for failure.

3.30.30 8040
Failed to create shared memory.

Error ID
kSrCreateShMem

Error name
kSrCreateShMem

Cause
Unable to create shared memory used to communicate between client and server.

Solution
See error log for additional information as to reason for failure. If the workstation is low on memory, close some
programs or increase virtual memory setting.

3.30.31 8041
Failed to map shared memory.

Error ID
kSrMapShMem

Error name
kSrMapShMem

740 www.honeywell.com
 3 ERROR CODES

Cause
Unable to map shared memory used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.32 8042
Failed to link to shared memory.

Error ID
kSrLinkShMem

Error name
kSrLinkShMem

Cause
Unable to map shared memory used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.33 8043
Failed to create <name> event

Error ID
kSrCreateEvent

Error name
kSrCreateEvent

Cause
Unable to create event mechanism used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.34 8044
Failed to open <name> event.

Error ID
kSrOpenEvent

Error name
kSrOpenEvent

741
3 ERROR CODES

Cause
Unable to open event mechanism used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.35 8045
Wait SR server event timed out.

Error ID
kSrWaitEvent

Error name
kSrWaitEvent

Cause
An SR client timed out while waiting for a server to complete an action.

Solution
Verify integrity of communications path between client and server.

3.30.36 8046
Failed to create mutex.

Error ID
kSrCreateMutex

Error name
kSrCreateMutex

Cause
Unable to create mutex mechanism used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.37 8047
Failed to open mutex.

Error ID
kSrOpenMutex

Error name
kSrOpenMutex

742 www.honeywell.com
 3 ERROR CODES

Cause
Unable to open mutex mechanism used to communicate between client and server.

Solution
See error log for additional information as to reason for failure.

3.30.38 8048
Wait on SR mutex timed out.

Error ID
kSrWaitMutex

Error name
kSrWaitMutex

Cause
An SR client timed out while waiting for a server to complete an action.

Solution
Verify integrity of communications path between client and server.

3.30.39 8049
Unknown message type <type>.

Error ID
kSrBadMsgType

Error name
kSrBadMsgType

Cause
Message received by client is unknown type (currently remote advise is only type supported).

Solution
Abnormal situation. Contact TAC.

3.30.40 8050
Failed to create SR pipe.

Error ID
kSrCreatePipe

Error name
kSrCreatePipe

743
3 ERROR CODES

Cause
Unable to create Pipe used by SR.

Solution
See error log for additional information as to reason for failure.

3.30.41 8051
Failed to disconnect pipe.

Error ID
kSrDisconnectPipe

Error name
kSrDisconnectPipe

Cause
Unable to disconnect Pipe used by SR.

Solution
See error log for additional information as to reason for failure.

3.30.42 8052
Error during pipe connect.

Error ID
kSrConnectPipe

Error name
kSrConnectPipe

Cause
Unable to connect Pipe used by SR.

Solution
See error log for additional information as to reason for failure.

3.30.43 8053
Error reading from pipe.

Error ID
kSrReadPipe

Error name
kSrReadPipe

744 www.honeywell.com
 3 ERROR CODES

Cause
Unable to read from Pipe used by SR.

Solution
See error log for additional information as to reason for failure.

3.30.44 8054
Unexpected event <name>

Error ID
kSrBadEvent

Error name
kSrBadEvent

Cause
An event occurred that was not expected.

Solution
See error log for additional information as to reason for failure.

3.30.45 8055
SR pipe server is already running.

Error ID
kSrPipeServerDup

Error name
kSrPipeServerDup

Cause
The SR pipe server was already running.

Solution
See error log for additional information as to reason for failure.

3.30.46 8060
Failed to install SR service.

Error ID
kSrInstallService

Error name
kSrInstallService

745
3 ERROR CODES

Cause
Unable to install SR as an NT service.

Solution
See error log for additional information as to reason for failure.

3.30.47 8061
Failed to create SR service

Error ID
kSrCreateService

Error name
kSrCreateService

Cause
NT Service Control Manager was unable to create the service.

Solution
See error log for additional information as to reason for failure.

3.30.48 8062
Failed to open Service Control Manager.

Error ID
kSrOpenSCMan

Error name
kSrOpenSCMan

Cause
Unable to open a session with the NT Service Control Manager. May have insufficient privilege to perform
service operations.

Solution
See error log for additional information as to reason for failure.

3.30.49 8063
Failed to stop SR service.

Error ID
kSrStopService

Error name
kSrStopService

746 www.honeywell.com
 3 ERROR CODES

Cause
NT Service Control Manager was unable to stop the service. The service may not be installed correctly, or may
not be running.

Solution
See error log for additional information as to reason for failure. Also, if the service failed to start, there may be
an entry in the event log.

3.30.50 8064
Failed to open SR service.

Error ID
kSrOpenService

Error name
kSrOpenService

Cause
Unable to remove SR service because NT Service Control Manager was unable to open the service. It may have
not been installed correctly or may have already been deleted.

Solution
See error log for additional information as to reason for failure.

3.30.51 8065
Failed to delete SR service.

Error ID
kSrDeleteService

Error name
kSrDeleteService

Cause
Unable to remove SR service because NT Service Control Manager was unable to delete the service. It may
have not been installed correctly or may have already been deleted.

Solution
See error log for additional information as to reason for failure.

3.30.52 8066
Service has been shutdown.

Error ID
kSrServiceShutdown

747
3 ERROR CODES

Error name
kSrServiceShutdown

Cause
For information purpose only (not an error)

Solution
If this is the primary server node and the service has shutdown, need to diagnose the failed server status.

748 www.honeywell.com
 3 ERROR CODES

3.31 Codes 8501 to 8511

Related topics
“8501” on page 749
“8502” on page 749
“8503” on page 750
“8504” on page 750
“8505” on page 750
“8506” on page 751
“8508” on page 751
“8509” on page 751
“8510” on page 752
“8511” on page 752

3.31.1 8501
Failed to create MailSlot.

Error ID
kErsyncMailslotErr

Error name
kErsyncMailslotErr

Cause
Ersync could not create a mailslot for ersyncdll to send messages to. Probably a permission or NT resource
problem.

Solution
Check that ERSYNC service was installed with a login name that has the correct permissions.

3.31.2 8502
Cannot sync - Primary ERDB is missing or is not a replicated database.

Error ID
kErsyncBadPrimary

Error name
kErsyncBadPrimary

Cause
ERSYNC cannot start as the primary ERDB (erdb_a.mdb) pointed to by the 'cb_a' ODBC DSN is not a valid
replicated database, or there is no valid database at the path pointed to by 'cb_a'.

749
3 ERROR CODES

Solution
Verify using control panel-<ODBC->system DSN that cb_a points to the correct database. Then use DbAdmin
to convert erdb_a.mdb to a replicated database.

3.31.3 8503
Cannot sync - Secondary ERDB is missing or is not a valid replica.

Error ID
kErsyncBadSecondary

Error name
kErsyncBadSecondary

Cause
ERSYNC cannot start as the secondary ERDB (erdb_b.mdb) pointed to by the 'cb_b' ODBC DSN is not a valid
Replica of 'cb_a', or there is no valid database at the path pointed to by 'cb_b'.

Solution
Verify using control panel-<ODBC-<system DSN that cb_b points to the correct database. Then use DbAdmin
to create a new replica.

3.31.4 8504
Cannot sync - Primary ERDB is not the Design Master.

Error ID
kErsyncNotMaster

Error name
kErsyncNotMaster

Cause
The primary ERDB (erdb_a.mdb) pointed to by the 'cb_a' ODBC DSN is not the design master.

Solution
Verify using control panel-<ODBC-<system DSN that cb_a points to the correct database. Then use DbAdmin
to recover design mastership for erdb_a.mdb.

3.31.5 8505
Error verifying DB status - see Error Replication log.

Error ID
kErsyncVerifyError

Error name
kErsyncVerifyError

750 www.honeywell.com
 3 ERROR CODES

Cause
An internal (DAO) error was returned by the database system while trying to verify the database status. Refer to
the 'C:\ErrorHandling\ErReplication.txt' error log for more details.

Solution
Correct the problem indicated by the message in the error log.

3.31.6 8506
Last synchronization failed to complete - see Error Replication log.

Error ID
kErsyncSyncError

Error name
kErsyncSyncError

Cause
Refer to the 'C:\ErrorHandling\ErReplication.txt' error log for more details.

Solution
Correct the problem indicated by the message in the error log.

3.31.7 8508
Out of memory.

Error ID
kErsyncMemory

Error name
kErsyncMemory

Cause
An ERSYNC operation failed to complete due to an out of memory condition.

Solution
Close programs to increase available memory.

3.31.8 8509
An unexpected error was encountered.

Error ID
kErsyncUnexpected

Error name
kErsyncUnexpected

751
3 ERROR CODES

Cause
An ERSYNC operation failed to complete due to an unexpected error. This is usually an NT system error.

Solution
None

3.31.9 8510
Backup of Snapshot failed - see ErReplication log.

Error ID
kErsyncCopySnapshot

Error name
kErsyncCopySnapshot

Cause
Copy of snapshot from primary to secondary database location for backup purposes failed. Refer to the 'C:
\ErrorHandling\ErReplication.txt' error log for more details.

Solution
Correct the problem indicated by the message in the error log.

3.31.10 8511
Unable to obtain ERDB database names.

Error ID
kErsyncDBNames

Error name
kErsyncDBNames

Cause
Unable to obtain ERDB database names from Registry. Refer to the 'C:\ErrorHandling\ErReplication.txt' error
log for more details.

Solution
Verify using control panel-<ODBC-<system DSN that 'cb_a' and 'cb_b' point to the correct databases.

752 www.honeywell.com
 3 ERROR CODES

3.32 Codes 9001 to 9099

Related topics
“9001” on page 754
“9002” on page 754
“9003” on page 755
“9004” on page 755
“9005” on page 755
“9006” on page 756
“9007” on page 756
“9010” on page 756
“9011” on page 757
“9012” on page 757
“9013” on page 757
“9014” on page 758
“9015” on page 758
“9016” on page 758
“9017” on page 759
“9018” on page 759
“9019” on page 759
“9020” on page 760
“9021” on page 760
“9022” on page 760
“9023” on page 761
“9024” on page 761
“9025” on page 761
“9050” on page 762
“9051” on page 762
“9052” on page 763
“9053” on page 763
“9054” on page 763
“9055” on page 764
“9056” on page 764
“9057” on page 764
“9058” on page 765
“9059” on page 765
“9060” on page 765
“9061” on page 766
“9062” on page 766
“9063” on page 766
“9064” on page 767
“9065” on page 767
“9066” on page 767
“9067” on page 768
“9068” on page 768
“9069” on page 769
“9070” on page 769

753
3 ERROR CODES

“9071” on page 769

“9072” on page 770
“9073” on page 770
“9074” on page 770
“9075” on page 771
“9076” on page 771
“9077” on page 771
“9078” on page 772
“9079” on page 772
“9080” on page 772
“9081” on page 773
“9082” on page 773
“9083” on page 773
“9084” on page 774
“9085” on page 774
“9086” on page 774
“9087” on page 775
“9088” on page 775
“9089” on page 775
“9090” on page 776
“9091” on page 776
“9092” on page 776
“9093” on page 777
“9094” on page 777
“9095” on page 777
“9096” on page 778
“9097” on page 778
“9098” on page 778
“9099” on page 779

3.32.1 9001
The entered is not allowed because it conflicts with a type name.

Error ID
ERR_CL_NAME_CONFLICT

Error name
CL_NAME_CONFLICT

Cause
User entered a conflicting name of a template/block type.

Solution
Change name and re-enter.

3.32.2 9002
Operation fails because the item name must be unique for the parent.

754 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_DUPITEMNAME_MOVE

Error name
CL_ DUPITEMNAME_MOVE

Cause
The selected blocks have duplicate names under the new parent on a move or copy.

Solution
Rename item name or exclude one of the duplicates from the selection list.

3.32.3 9003
Module/block must be inactive before it can be loaded.

Error ID
ERR_CL_SCMINVSTATEFORLOAD

Error name
CL_SCMINVSTATEFORLOAD

Cause
SCM is running, cannot be loaded.

Solution
Change the state of the SCM.

3.32.4 9004
Datatype not supported for Parameter based licensing.

Error ID
ERR_CL_LIC_PARAM_NOT_SUPPORTED

Error name
CL_LIC_PARAM_NOT_SUPPORTED

Cause
Some datatypes like BLOBS are not supported for licensing.

Solution
None

3.32.5 9005
Insufficient user privilege to rename tag.

755
3 ERROR CODES

Error ID
ERR_CL_NOPRIVRENAME

Error name
CL_NOPRIVRENAME

Cause
Access level needed to rename is insufficient.

Solution
Log on as a user with higher privilege or change level required for renaming.

3.32.6 9006
Invalid String Length Entered. Valid Lengths are 8,16,32,64.

Error ID
ERR_CL_STRLEN_INVALID

Error name
CL_STRLEN_INVALID

Cause
String length value entered does not match one of the acceptable values.

Solution
Illegal value exception at load time if not handled here

3.32.7 9007
The combination of STRLEN and NSTRING parameter entries yields more data than the block supports
(maximum of 960 characters).

Error ID
ERR_CL_NSTRING_STRLEN_COMBINATION

Error name
CL_NSTRING_STRLEN_COMBINATION

Cause
Configured combination of NSTRING * STRLEN exceeds 960 Unicode characters.

Solution
None, NSTRING or STRLEN must be reduced.

3.32.8 9010
Error in firmware file.

756 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ERROR_IN_FW_FILE

Error name
CL_ ERROR_IN_FW_FILE

Cause
The firmware file is corrupted or has invalid data.

Solution
Try with a new firmware file from installation of the same build.

3.32.9 9011
Empty or parameter name.

Error ID
ERR_CL_EMPTY_BLK_PRM_NAME

Error name
CL_ EMPTY_BLK_PRM_NAME

Cause
Either the supplied firmware file name or IOLINK block name is empty.

Solution
Try with the correct IOLINK block name or complete file path.

3.32.10 9012
IOM number invalid.

Error ID
ERR_CL_INVALID_IOM_NUM

Error name
CL_ INVALID_IOM_NUM

Cause
Either the supplied firmware file name or IOLINK block name is empty.

Solution
Try the correct IOLINK block name or complete file path.

3.32.11 9013
Internal Error: Invalid parameters

757
3 ERROR CODES

Error ID
ERR_CL_INVALID_PARMS

Error name
CL_INVALID_PARMS

Cause
Invalid parameters passed across function calls.

Solution
Try again after restarting the server.

3.32.12 9014
Wrong firmware file.

Error ID
ERR_CL_WRONG_FW_FILE

Error name
CL_WRONG_FW_FILE

Cause
Firmware file is not compatible with the IOM type.

Solution
Try with the firmware file suitable for the IOM.

3.32.13 9015
IOLINK is not configured for Series CI/O.

Error ID
ERR_CL_IOL_NOT_FOR_SERIESC

Error name
CL_IOL_NOT_FOR_SERIESC

Cause
IOLINK to which the IOM is connected is not configured for Series CI/O.

Solution
Configure the IOLINK block for Series C I/O.

3.32.14 9016
IOM not in ALIVE state

758 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_IOM_NOT_IN_ALIVE

Error name
CL_IOM_NOT_IN_ALIVE

Cause
The IOM is not in ALIVE state.

Solution
Issue a SHUTDOWNA/B IOM COMMAND command for the IOM and retry.

3.32.15 9017
This code is used to transfer information from DLL to client

Error ID
ERR_CL_INFORMATION

Error name
CL_INFORMATION

Cause
This code is used to transfer information from DLL to client

Solution
Not an error.

3.32.16 9018
S-Record too short in firmware file.

Error ID
ERR_CL_SREC_TOO_SHORT

Error name
CL_ SREC_TOO_SHORT

Cause
S-record file is corrupted

Solution
Try with a new firmware file from fresh installation of the same build

3.32.17 9019
Invalid S-record type in firmware file

759
3 ERROR CODES

Error ID
ERR_CL_INVALID_SREC_TYPE

Error name
CL_INVALID_SREC_TYPE

Cause
S-record file is corrupted

Solution
Try with a new firmware file from fresh installation of the same build.

3.32.18 9020
Empty S-Record in firmware file.

Error ID
ERR_CL_EMPTY_SREC

Error name
CL_EMPTY_SREC

Cause
S-Record file is corrupted.

Solution
Try with a new firmware file from fresh installation of the same build.

3.32.19 9021
Incompatible footer S-Record type in firmware file.

Error ID
ERR_CL_FOOTER_SREC_INCOMP

Error name
CL_FOOTER_SREC_INCOMP

Cause
S-Record file is corrupted.

Solution
Try with a new firmware file from fresh installation of the same build.

3.32.20 9022
Inconsistent S-Record type in firmware file.

760 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_INCONSISTANT_SREC

Error name
CL_ INCONSISTANT_SREC

Cause
S-Record file is corrupted.

Solution
Try with a new firmware file from fresh installation of the same build.

3.32.21 9023
Internal error occurred during the firmware download.

Error ID
ERR_CL_FWDL_INTERNAL_ERROR

Error name
CL__FWDL_INTERNAL_ERROR

Cause
Software misbehavior

Solution
Reset the IOM, re-start the server and repeat the operation.

3.32.22 9024
PUSHSP cannot be TRUE when the wired SP connection exists or the wired SP connection cannot be made
when the PUSHSP is TRUE.

Error ID
ERR_CL_PID_PUSHSPCONFIG_UNEXP

Error name
CL_PID_PUSHSPCONFIG_UNEXP

Cause
PUSHSP set to TRUE and SP connection cannot coexist at the same time.

Solution
Either set the PUSHSP to FALSE or remove the connection to SP.

3.32.23 9025
Warning - OPC item validation failed.

761
3 ERROR CODES

Error ID
ERR_CL_OPC_ITEM_VALIDATION

Error name
CL_OPC_ITEM_VALIDATION

Cause
The item definition does not exist within the servers address space.

Solution
Add the item to the OPC server or choose another item.

3.32.24 9050
CCL File not found

Error ID
ERR_CL_CCL_FILE_NOT_FOUND

Error name
CL_CCL_FILE_NOT_FOUND

Cause
CCL file is not found.

Solution
None

3.32.25 9051
Reverting of data type for parameter is not allowed when instances are derived from it.

Error ID
ERR_ERR_CL_PARAMCODECHANGE

Error name
ERR_CL_PARAMCODECHANGE

Cause
The data type of parameter has been changed and save is attempted, which would not allow save due to change
in data type. Once again the parameter data type is reverted back to its previous data type and save attempted.
This would cause change in the internal parameter identifier which is not allowed when instances are derived
from it.

Solution
Do Save As on the block type.

762 www.honeywell.com
 3 ERROR CODES

3.32.26 9052
Failed to get network type information from server.

Error ID
ERR_ CL_FAILED_GET_NETWORKTYPE

Error name
CL_FAILED_GET_NETWORKTYPE

Cause
Unable to get network type information from erserver.

Solution
Re-start ER server and repeat the operation.

3.32.27 9053
Cannot fetch information from registry.

Error ID
ERR_ERCLI_REGISTRYFETCHERROR

Error name
ERCLI_REGISTRYFETCHERROR

Cause
Cannot fetch information from registry.

Solution
None

3.32.28 9054
The Unit Control Module name does not exist or is invalid. Cannot load a Recipe Control Module without
specifying a valid UCM.

Error ID
ERR_CL_UCF_INVALIDUCMNAME

Error name
CL_UCF_INVALIDUCMNAME

Cause
(UCF) as stated.

763
3 ERROR CODES

Solution
Enter a valid Unit Control Module name.

3.32.29 9055
Cannot add block pins because CAB Instance is used in the insertion.

Error ID
ERR_CL_CAB_BLOCKPINS_INSERTION

Error name
CL_CAB_BLOCKPINS_INSERTION

Cause
When CAB block added as an insertion, cannot add block pins to CAB block.

Solution
Remove the CAB from the insertion and add pins.

3.32.30 9056
Insertion not allowed because the specified CAB block is having Input/Output pins.

Error ID
ERR_CL_INSERTION_CAB_BLOCKPINS

Error name
CL_INSERTION_CAB_BLOCKPINS

Cause
Insertion not possible when CAB block is with pins.

Solution
Remove the pins from the CAB block and try insertion.

3.32.31 9057
Duplicate parameter code for parameter.

Error ID
ERR_CL_DUPL_PARAMCODE

Error name
CL_DUPL_PARAMCODE

Cause
There was a attempt to create a new parameter with the parameter code which is already in use.

764 www.honeywell.com
 3 ERROR CODES

Solution
Give a new parameter code and repeat the operation.

3.32.32 9058
Reverting of data type for parameter is not allowed when instances are derived from it.

Error ID
ERR_CL_PARAM_TYPE_REVERT

Error name
CL_PARAM_TYPE_REVERT

Cause
The data type of parameter has been changed and save is attempted, which would not allow save due to change
in data type. Once again the parameter data type is reverted back to its previous data type and save attempted.
This would cause change in the internal parameter identifier which is not allowed when instances are derived
from it

Solution
Do Save As on the block type.

3.32.33 9059
The maximum length of the object's Full Item Name has been exceeded. Shorten the entity name of the object
and its parents, or reduce the number of levels of hierarchy.

Error ID
ERR_CL_EMB_FINTOOLONG

Error name
CL_EMB_FINTOOLONG

Cause
The combined lengths of the entity names for the objects parents exceed the maximum allowed.

Solution
Shorten the names of parents or reduce the number of levels

3.32.34 9060
Cannot refer to parameters outside of the container.

Error ID
ERR_CL_CAN_NOT_REFER_PARAM

Error name
CL_CAN_NOT_REFER_PARAM

765
3 ERROR CODES

Cause
The block can refer to parameters belonging to it's container, blocks with in it's container and self.

Solution
Refer to a valid Parameter.

3.32.35 9061
Firmware update of module failed.

Error ID
ERR_CL_OPM_FIRMWAREBURNFAILED

Error name
CL_OPM_FIRMWAREBURNFAILED

Cause
The BOOTP service is not available either due to network problems or because the service is stopped.

Solution
Ensure that the BOOTP service is running and reachable. For more information on BOOTP service rules and
considerations, refer to the section Configuration Rules (C2F) -> CR_MCF.2 in the Control Hardware Planning
Guide.

3.32.36 9062
Indirect synchronization failed.

Error ID
ERR_CL_OPM_INDRCTSYNCFAIL

Error name
CL_OPM_INDRCTSYNCFAIL

Cause
None.

Solution
None.

3.32.37 9063
Primary module must be loaded before loading the Secondary module.

Error ID
ERR_CL_PRIMARY_NOTLOADED

766 www.honeywell.com
 3 ERROR CODES

Error name
CL_PRIMARY_NOTLOADED

Cause
Before loading the secondary module, User has to load primary module.

Solution
Load primary module and then try loading secondary module.

3.32.38 9064
Too many blocks in SCM/RCM. Table View will not function.

Error ID
ERR_CL_SCM_TOO_MANY_BLOCKS

Error name
CL_SCM_TOO_MANY_BLOCKS

Cause
Too many blocks are there in SCM/RCM. The Order parameter becomes too big for CDA to handle.

Solution
Reduce the number of steps and transitions in the SCM/RCM.

3.32.39 9065
Address Conflict. The Supervisory MAC Address, Supervisory Slot Number, Module Slot Number conflicts
with the Loaded Interface Module

Error ID
ERR_CL_INTM_ADDRESSCONFLICTv

Error name
CL_INTM_ADDRESSCONFLICT

Cause
User entered the parameter values for SLOTNUMBER, ULCNBMAC and CNISLOTNUM of current Interface
module(FIM or IOLIM) which are conflicting with another loaded interface module.

Solution
Change the values for Parameters SLOTNUMBER, ULCNBMAC and CNISLOTNUM of this Interface
module((FIM or IOLIM) so that it is not conflicting with the loaded interface module.

3.32.40 9066
Migration Wizard detected a Controller state change from the time user has got an option to do this operation.
Migration Wizard will not do this operation.

767
3 ERROR CODES

Error ID
ERR_CL_MIGRAT_EXT_STATECHANG

Error name
CL_MIGRAT_EXT_STATECHANG

Cause
Wizard will give Go back and Continue option (when the new primary is running with latest firmware and the
controller state at that time is STANBY). Before selecting these options, if a power failure happened or anything
that lead to a state change, it cannot be done. So in this case, you have to manually finish the migration. This is
a very rare situation, where after wizard gives you options and before you select, something happens to the
controller and the selected operation cannot be performed.

Solution
You have to manually do the migration.

3.32.41 9067
Cannot convert to HART enabled block in User Template

Error ID
CL_PMIO_HART_ENABLE

Error name
ERR_CL_PMIO_HART_ENABLE

Cause
Cannot change block attributes in User Templates

Solution
HART enable option is available for the block in the instance

3.32.42 9068
Checkpoint backup failed. Rebuild checkpoint for this module and try again.

Error ID
ERR_CL_MIGRAT_WIZ_CHKPT_NOT_DONE

Error name
CL_MIGRAT_WIZ_CHKPT_NOT_DONE

Cause
The Module doesn't have a checkpoint file.

Solution
Rebuild checkpoint for this module and then try to do migration.

768 www.honeywell.com
 3 ERROR CODES

3.32.43 9069
Insertion not allowed because the specified CAB block is configured with PROGRAM Access level.

Error ID
ERR_CL_CAB_INSERTION_ACCESSLEVEL_CHECK

Error name
CL_CAB_INSERTION_ACCESSLEVEL_CHECK

Cause
Insertion not possible when CAB block's access level is configured as PROGRAM.

Solution
Set the Access level to CONTCONTROL and try insertion.

3.32.44 9070
Cannot use PM IO and Series C IO blocks' parameters in CAB Parameter References.

Error ID
ERR_CL_ILLEGAL_SERIES_C_IO_AND_PMIO_PREF

Error name
CL_ILLEGAL_SERIES_C_IO_AND_PMIO_PREF

Cause
Cannot use PM IO and Series C IO blocks parameters.

Solution
None

3.32.45 9071
The SCANRATE parameter value is invalid.

Error ID
ERR_CL_CIO_INVALID_SCANRATE

Error name
CL_CIO_INVALID_SCANRATE

Cause
The configured IO Link scan rate is invalid or not supported for this IOM module type.

Solution
Select a different value in the SCANRATE enumeration drop down list.

769
3 ERROR CODES

3.32.46 9072
Cannot perform load operation because CAB block being used in the insertion is having Invalid configuration.

Error ID
ERR_CL_INVALID_CONFIGURATION_FOR_INSERTION

Error name
CL_INVALID_CONFIGURATION_FOR_INSERTION

Cause
CAB block is not having valid values for the parameters ACCESSLEVEL and X_EXECMODE.

Solution
Check the ACCESSLEVEL value for the Continious Control and the X_EXECMODE value for the Atomic.

3.32.47 9073
Output characterization coordinates are invalid.

Error ID
ERR_CL_AOM_INVALID_OPCHAR

Error name
CL_AOM_INVALID_OPCHAR

Cause
The input coordinates (OPIN 1-4) or output coordinates (OPOUT 1-4) are NaN or out of range.

Solution
Select different values for the coordinates or disable OP characterization.

3.32.48 9074
Cannot refer to blocks outside of the container.

Error ID
ERR_CL_CAN_NOT_REFER_BLOCK

Error name
CL_CAN_NOT_REFER_BLOCK

Cause
The block can only refer to its container, blocks with in its container, and self.

Solution
Refer to a valid block.

770 www.honeywell.com
 3 ERROR CODES

3.32.49 9075
Gate Type is incompatible with number of Condition(s) assigned to it.

Error ID
ERR_CL_SCM_PRIMARY_GATE

Error name
CL_SCM_PRIMARY_GATE

Cause
Configuration of Primary Gate's Type is incompatible with the number of Conditions assigned to the Gate (for
example, 0 inputs should be configured for 'None', 'On'; and 'Off' Gates; 1 input for 'Connect' and 'Not' Gates
and 2 inputs for ';Xor' Gates).

Solution
Change the Condition assignment (that is, to which Gate each Condition is assigned to) or change the Gate Type
to compatible settings.

3.32.50 9076
Error in Gate: Gate Type is incompatible with input(s).

Error ID
ERR_CL_SCM_SECONDARY_GATE

Error name
CL_SCM_SECONDARY_GATE

Cause
To avoid 'gaps' or 'crossings' of assignments among Conditions and Gates, the Gate assignments (that is, to
which Gate a determined Condition is assigned to) of some Conditions are changed. If the configuration of Gate
assignment for Condition #n triggers the adjustment, the Gate assignments for Condition > n will be affected.
The displayed error message reports which Conditions will be affected and to which value the Gate assignments
will be changed.

Solution
None

3.32.51 9077
The Gate Assignment for Conditions to GateP is crossed.

Error ID
ERR_CL_CROSS_GATE_ASSIGNMENT

Error name
CL_CROSS_GATE_ASSIGNMENT

771
3 ERROR CODES

Cause
The change in Gate Assignment(s) has resulted in crossing of the Gate Conditions which is an invalid
configuration.

Solution
Correct the Gate Assignment in the Instance or the base template.

3.32.52 9078
Cannot create file : The complete File path of exporting file exceeds maximum limit of 256 character.

Error ID
ERR_CL_FILEPATH_MAX_LENGTH

Error name
CL_FILEPATH_MAX_LENGTH

Cause
The length of complete file path of the file to be exported exceeds more than 256 characters.

Solution
The length of file path should be less than 255 characters.

3.32.53 9079
Load destination of parameter has changed. It could impact On-Process Migration

Error ID
ERR_CL_LOADDESTCHANGE

Error name
CL_LOADDESTCHANGE

Cause
Load destination of a parameter had been changed which could affect on process migration

Solution
Retain the original load destination in DEFXML files and retry

3.32.54 9080
Warning: Pin connection has to be remade for the description to change in the Annunciator Panel block

Error ID
ERR_CL_PFB_PANEL_DESC_NO_CHANGE

Error name
CL_PFB_PANEL_DESC_NO_CHANGE

772 www.honeywell.com
 3 ERROR CODES

Cause
The change in description in the alarm window block will not reflect in the Annunciator Panel block till the
connection is remade between them

Solution
Remake the connection between the alarm window block and annunciator panel block after changing the
description

3.32.55 9081
Insufficient disk space available, failed in creating the file

Error ID
ERR_CL_DISK_FULL

Error name
CL_DISK_FULL

Cause
Disk space is not available therefore, file cannot be created

Solution
Insert a new disk which has sufficient space

3.32.56 9082
Warning: The block will be deleted

Error ID
WARNING_CL_CP_BLKLOSS

Error name
CL_CP_BLKLOSS

Cause
Change parent validation result: Block will be deleted

Solution
Select different template as a new parent or deselect the control to proceed for change parent

3.32.57 9083
Warning: The connection will be lost

Error ID
WARNING_CL_CP_CONNLOSS

773
3 ERROR CODES

Error name
CL_CP_CONNLOSS

Cause
Change parent validation result: Connection will be deleted.

Solution
Select different template as a new parent or deselect the control to proceed for change parent.

3.32.58 9084
Success! Validation succeeded

Error ID
ERR_CL_CP_VALIDATION_SUCCEEDED

Error name
CL_CP_VALIDATION_SUCCEEDED

Cause
Change Parent Validation succeeded for the selected control.

Solution
None

3.32.59 9085
No connection. Loss of control

Error ID
ERR_CL_CP_VALIDATION_NOCONN_LOSS

Error name
CL_CP_VALIDATION_NOCONN_LOSS

Cause
No Connection Loss for the control as a result of Change Parent Validation

Solution
None

3.32.60 9086
Success! Change Parent succeeded for control

Error ID
ERR_CL_CP_OPER_SUCCEEDED

774 www.honeywell.com
 3 ERROR CODES

Error name
CL_CP_OPER_SUCCEEDED

Cause
Change Parent Operation succeeded for the selected control.

Solution
None

3.32.61 9087
Warning: The connection is lost

Error ID
WARNING_CL_CP_OPER_CONNLOSS

Error name
CL_CP_OPER_CONNLOSS

Cause
Change parent Operation result: Connection is deleted

Solution
None

3.32.62 9088
Warning: The block is deleted.

Error ID
WARNING_CL_CP_OPER_BLKLOSS

Error name
CL_CP_OPER_BLKLOSS

Cause
Change parent operation result: Block is deleted.

Solution
None

3.32.63 9089
Warning: The block is renamed

Error ID
WARNING_CL_CP_BLK_NAME_CHANGE

775
3 ERROR CODES

Error name
CL_CP_BLK_NAME_CHANGE

Cause
Change parent operation result: Block is renamed due to the name conflict.

Solution
None

3.32.64 9090
Warning: The block is newly added.

Error ID
WARNING_CL_CP_NEWBLK_ADDED

Error name
CL_CP_NEWBLK_ADDED

Cause
Change parent operation result: New Block is added to the selected control

Solution
None

3.32.65 9091
Changes have been made to the RCM or SCM other than to the Active Load Parameter References. Active Load
is not supported.

Error ID
ERR_CL_ATLOTHERCHNG

Error name
CL_ATLOTHERCHNG

Cause
An edit has been made to the RCM or SCM other than to the 'Active Load' parameter reference (such as, change
parameter value, add/delete block add/del expression).

Solution
Strategy should not be selected for Active Load. It may be loaded using standard load, which requires it to be
set to inactive.

3.32.66 9092
Changes have been made to other than to the Active Load Parameter References. Active Load is not supported.

776 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ATLNOREFCHNG

Error name
CL_ATLNOREFCHNG

Cause
Active Load Parameter Reference has not been modified.

Solution
Strategy should not be selected for the Active Load. It may be loaded using standard load, which requires it to
be set to inactive.

3.32.67 9093
Active Load is not supported for this release.

Error ID
ERR_CL_ATLREL

Error name
CL_ATLREL

Cause
The controller release does not support Active Load.

Solution
Migrate to release 410 or later, or perform a full load.

3.32.68 9094
DATA Block is not configured

Error ID
ERR_CL_NODATABLK

Error name
CL_NODATABLK

Cause
There is no DATA Block configured

Solution
Only SCMs and RCMs support the DATA Block. Configure parameter 'DATABLOCK' on the SCM or RCM.

3.32.69 9095
Cannot load DATA block contained in %s to current controller version

777
3 ERROR CODES

Error ID
ERR_CL_UCF_NO_DATABLOCK_SUPT

Error name
CL_UCF_NO_DATABLOCK_SUPT

Cause
Attempt to load RCM containing a data block to controller with IMAGEVER earlier than R310

Solution
None

3.32.70 9096
CM Name reference is not supported by current controller version

Error ID
ERR_CL_UCF_NO_UCMNAMEREF_SUPT

Error name
CL_UCF_NO_UCMNAMEREF_SUPT

Cause
Attempt to load RCM/SCM with USENAMEREF Parameter set to TRUE to a controller with IMAGEVER
earlier than R310

Solution
Replace the name reference with an entry in UCMNAME and set USENAMEREF to FALSE.

3.32.71 9097
The entry for UCMNAME is not a valid UCM name

Error ID
ERR_CL_UCF_BADUCMNAME

Error name
CL_UCF_BADUCMNAME

Cause
The name in UCM name was not the name of a valid UCM

Solution
Replace the name in UCMNAME with the name of a valid UCM

3.32.72 9098
The entry for EQUIPNAME is not a valid CM, UCM, RCM, or SCM name

778 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_UCF_INVALID_EQUIPNAME

Error name
CL_UCF_INVALID_EQUIPNAME

Cause
Equipment name should be either a CM, UCM, RCM or SCM.

Solution
Enter a valid CM, UCM, RCM, or SCM block name

3.32.73 9099
Invalid Name Reference. Select an alias parameter which refers to a block name.

Error ID
ERR_CL_UCF_INVALID_UCM_NAMEREF

Error name
CL_UCF_INVALID_UCM_NAMEREF

Cause
(UCF) as stated

Solution
Enter a valid Unit Control Module name reference

779
3 ERROR CODES

3.33 Codes 9100 to 9178

Related topics
“9100” on page 781
“9101” on page 781
“9102” on page 781
“9103” on page 782
“9104” on page 782
“9105” on page 783
“9106” on page 783
“9107” on page 783
“9108” on page 784
“9109” on page 784
“9110” on page 784
“9111” on page 785
“9112” on page 785
“9113” on page 785
“9114” on page 786
“9116” on page 786
“9117” on page 786
“9118” on page 787
“9119” on page 787
“9121” on page 788
“9122” on page 788
“9134” on page 788
“9136” on page 789
“9137” on page 789
“9138” on page 789
“9139” on page 790
“9140” on page 790
“9141” on page 790
“9142” on page 791
“9143” on page 791
“9144” on page 791
“9145” on page 792
“9146” on page 792
“9147” on page 792
“9148” on page 793
“9149” on page 793
“9150” on page 793
“9151” on page 794
“9152” on page 794
“9153” on page 794
“9154” on page 795
“9155” on page 795
“9156” on page 795
“9157” on page 796

780 www.honeywell.com
 3 ERROR CODES

“9161” on page 796

“9170” on page 796
“9177” on page 797
“9178” on page 797

3.33.1 9100
Invalid load state. Active load is stopped.

Error ID
ERR_CL_ATLINVALST

Error name
CL_ATLINVALST

Cause
The ATLOADSTATE parameter of the RCM/SCM is invalid. It should be in the waiting end state. This may be
caused by the following reasons:
• State of RCM/SCM changed in the middle of the load.
• Collision with another Active Load or full load of the same module (not likely).

Solution
Attempt to repeat Active Load or perform a full load.

3.33.2 9101
The RCM specified in %s.EQUIPMENTNAME is assigned to a controller whose firmware version does not
support the configuration

Error ID
ERR_CL_UCF_EQUIP_NOT_SUPTD

Error name
CL_UCF_EQUIP_NOT_SUPTD

Cause
The RCM in EQUIPMENTNAME is assigned to a controller at a release level that doesn't support an RCM as
Equipment from a PHASE

Solution
Migrate to release 310 or later, or change the reference to an SCM

3.33.3 9102
The Controller Firmware version for the controller that the RCM containing %s is assigned to does not support
RCMs in EQUIPMENTNAME

Error ID
ERR_CL_UCF_RCM_NOT_SUPTD

781
3 ERROR CODES

Error name
CL_UCF_RCM_NOT_SUPTD

Cause
This Phase Block's RCM is assigned to a controller release that doesn't support an RCM as Equipment in a
PHASE

Solution
Migrate to release 310 or later, or change the reference to an SCM

3.33.4 9103
The referenced parameter does not exist for the controller release.

Error ID
ERR_CL_ATREFINVREL

Error name
CL_ATREFINVREL

Cause
The referenced parameter does not exist in the controller release where the reference resides.

Solution
Do one of the following:
• Migrate the controller where the reference resides to R310 release or later, or
• Clear the reference, or
• Change the reference to a reference that resides in an R310 release or later controller.

Attention
'Active load' function may be used to load modified Active Load references when the RCM/SCM is running. Refer the
function description for the working of this function before starting the modifications.

3.33.5 9104
References to a tag name are not supported for the controller release

Error ID
ERR_CL_ATBLKIDINVREL

Error name
CL_ATBLKIDINVREL

Cause
The controller does not support reference to names

Solution
Migrate the controller to R310 or later

782 www.honeywell.com
 3 ERROR CODES

3.33.6 9105
Unable to complete interoperability validation because referenced controller is not loaded

Error ID
ERR_CL_ATNOINTEROP

Error name
CL_ATNOINTEROP

Cause
Since the controller hasn't been loaded, cannot read the version from the controller

Solution
Load the controller

3.33.7 9106
The Alias Instance supplied is not NAME or the Block is not the same type as the Model Block

Error ID
ERR_CL_ALIASREF_MISMATCH

Error name
CL_ALIASREF_MISMATCH

Cause
User supplied a BlockName.Param that was not the type specified in the model block, or the parameter was not
NAME

Solution
None

3.33.8 9107
Failed to get interfaces needed for hook

Error ID
ERR_CL_NOINTERFACEFORHOOK

Error name
CL_NOINTERFACEFORHOOK

Cause
Failed to get interfaces needed for hook

783
3 ERROR CODES

Solution
No work around, check error log for more details.
Call TAC.

3.33.9 9108
ACE error: Memory configured for more than 32MB on an ACE that does not support it

Error ID
ERR_CL_ACE_CFGMEM_NOT_SUPTD

Error name
CL_ACE_CFGMEM_NOT_SUPTD

Cause
A pre-R310 ACE being loaded from a R310 or post-R310 control builder. If memory parameter is set to more
than 32MB in this situation, this error occurs and load is aborted.

Solution
Ensure that ACE memory parameter is set to 32MB

3.33.10 9109
Cannot remove template defining attribute

Error ID
ERR_CL_CANTREMOVETEMPDEFATTR

Error name
CL_CANTREMOVETEMPDEFATTR

Cause
Cannot remove template defining attribute

Solution
None.

3.33.11 9110
Failed to open dynamic snapshot file

Error ID
ERR_CL_OPENDYNSNAPSHOT

Error name
CL_OPENDYNSNAPSHOT

784 www.honeywell.com
 3 ERROR CODES

Cause
Any number of failures to open a DSD file either during Save or Restore operations.

Solution
None

3.33.12 9111
The UCM specified in UCMNAME is not assigned

Error ID
ERR_CL_UCF_UCMNOTASSIGN

Error name
CL_UCF_UCMNOTASSIGN

Cause
The UCM specified in UCMNAME is not assigned to any execution environment.

Solution
Assign the UCM to an execution environment

3.33.13 9112
The Block specified in EQUIPNAME is not assigned

Error ID
ERR_CL_UCF_EQPNOTASSIGN

Error name
CL_UCF_EQPNOTASSIGN

Cause
The Block specified in Equipment Name is not assigned to any execution environment.

Solution
Assign the Block to an execution environment

3.33.14 9113
Individual array elements may not be made template defining for this parameter.

Error ID
ERR_CL_TMPLTDEF_ARRAY

Error name
CL_TMPLTDEF_ARRAY

785
3 ERROR CODES

Cause
For the selected parameter, individual array elements may not be made template defining
(SCM_1.ALIASREF[ ][ ] may be selected, but SCM_1.ALIASREF[1][2] may not be selected)

Solution
Select the entire array (SCM_1.ALIASREF[ ][ ])

3.33.15 9114
None.

Error ID
ERR_CL_TMPLTUNDEF_SZCTRL

Error name
CL_TMPLTUNDEF_SZCTRL

Cause
User attempted to set the template defining attribute of the first parameter as undefined. This is not allowed
while the second parameter is template defining

Solution
Set the template defining attribute of the first parameter to be undefined

3.33.16 9116
Exceeded the tagged object limit. Only available for the activities.

Error ID
ERR_CL_NOTAGSFORACTIVITIES

Error name
ERR_CL_NOTAGSFORACTIVITIES

Cause
There are too many tag objects assigned to this CEE. The CAM cannot create enough tag objects for the amount
of activities requested by the NUMACT parameter.

Solution
Remove the tag objects from the CEE that are not loaded to the controller. Distribute the strategy across several
controllers or decrease the NUMACT value.

3.33.17 9117
Too many running activities in the parameter. Cannot reduce NUMACT parameter.

Error ID
ERR_CL_TOOMANYRUNACTIVITES

786 www.honeywell.com
 3 ERROR CODES

Error name
ERR_CL_TOOMANYRUNACTIVITES

Cause
NUMACT has been reduced and the CEE is being loaded. Currently there are too many activities in the CEE.

Solution
Decrease the number of activities or wait until the CEE uses fewer activities and then reload.
Since this error is only visible when the CEE is idle, you may have to start the CEE and run it until the number
of activities decreases.

3.33.18 9118
Number of Activities is not equal to zero and it does not support the activities.

Error ID
ERR_CL_CEEDOSNTSUPPORTACT

Error name
ERR_CL_CEEDOSNTSUPPORTACT

Cause
The value of the NUMACT parameter was changed and a load was performed but the controller is not R400
release.

Solution
Change NUMACT parameter to zero and reload the CEE.

3.33.19 9119
One or more activities were not loaded to the controller properly.

Error ID
ERR_CL_CEEACTNOTLOADED

Error name
CL_CEEACTNOTLOADED

Cause
1. The controller has reached its memory capacity and more blocks cannot be loaded.
2. There was a communication error with the controller. A communication error can occur if a controller
switchover was requested before the initial load of all the activities was completed.

Solution
1. Remove the container blocks from the CEE that are loaded to the controller or consider distributing your
strategy across several controllers.
2. Reduce the NUMACT parameter value.

787
3 ERROR CODES

3. Perform a 'Load while active' operation of the CEE. This tries to reload the blocks that failed.

3.33.20 9121
DB Transaction has timed out in ErServer

Error ID
ERR_ERSRVR_TRANS_TIMEOUT

Error name
ERSRVR_TRANS_TIMEOUT

Cause
May be a multiple user issue. Operation performed by a client of the ERDB or EMDB updated too many items
at one time and another operation may have been started at the same time.

Solution
Only allow one engineer at a time is allowed to update the database during this operation. Break operation up
into smaller pieces. For example, copy 10 CMs at a time instead of 100.

3.33.21 9122
ErServer cannot fetch information from registry

Error ID
ERR_ERSRVR_REGISTRY

Error name
ERSRVR_REGISTRY

Cause
May be an installation problem.

Solution
Call TAC.

3.33.22 9134
The number of formula and report parameters enabled exceeds the limit for the Phase block.

Error ID
ERR_CL_FormReportEnabledExceded

Error name
CL_FormReportEnabledExceded

Cause
The number of formula or report parameters enabled for the Phase block is changed.

788 www.honeywell.com
 3 ERROR CODES

Solution
Reduce the number of formula or report parameters enabled and reload the block.

3.33.23 9136
Duplicate slave address exists on the PBLink.

Error ID
ERR_CL_ASSIGN_DUP_SA

Error name
CL_ASSIGN_DUP_SA

Cause
A DSB block with the same slave address has already been assigned to this PBLink block.

Solution
Change the slave address.

3.33.24 9137
DSB configuration cannot be changed if the channels are assigned or if the PIOMB is associated.

Error ID
ERR_CL_DSB_CONFIGPARMCHNG

Error name
CL_DSB_CONFIGPARMCHNG

Cause
One or more channels of the associated PIOMB are assigned or PIOMB is associated to a PDC owned by this
DSB.
The configuration parameter which the user attempted to change cannot be performed while this condition
exists.

Solution
• If the parameter is specific to channels, the assigned channels of the associated PIOMB for the PDC must be
unassigned in order to change the parameter.
• If the parameter is specific to a PDC, the PIOMB associated to that PDC must be disassociated in order to
change the parameter.
• If the parameter is general to the entire DSB, all PIOMBs associated with any PDC of this DSB must be
disassociated.

3.33.25 9138
DSB block is associated with one or more PIOMB blocks.

Error ID
ERR_CL_DSB_PIOMBASSOCIATED

789
3 ERROR CODES

Error name
CL_DSB_PIOMBASSOCIATED

Cause
One or more PIOMB is referring to one or more PDCs owned by this DSB. You cannot delete a DSB until there
are no PIOMBs associated with this DSB.
In case of a Force Delete from Monitoring view, the DSB block can be deleted. However, the associated
PIOMB blocks must be deleted from the Monitoring view.

Solution
Dissociate all PIOMBs with PDCs owned by this DSB.

3.33.26 9139
Cannot load DSB block . Slave address is not configured in PBLink.

Error ID
ERR_CL_DSB_NOLOADFORUNCONFDSB

Error name
CL_DSB_NOLOADFORUNCONFDSB

Cause
Trying to load a DSB with slave address which is not configured in PBLink.

Solution
Configure the station address in PBLink with the DSB slave address.

3.33.27 9140
Cannot load the DSB block . NETTAGNAME is not configured for the DSB.

Error ID
ERR_CL_DSB_NOLOADFORUNCONFNETTAGNAME

Error name
CL_DSB_NOLOADFORUNCONFDSB

Cause
Trying to load a DSB with slave address which is not configured in PBLink.

Solution
Configure the slave address correctly.

3.33.28 9141
Invalid channel type in PDC data.

790 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_PIOMB_INVALID_CHANNELTYPE

Error name
CL_PIOMB_INVALID_CHANNELTYPE

Cause
Invalid channel type string received from device definition in DSB PDC data XML parameter.

Solution
Device definition file may need correction to match system enumeration.

3.33.29 9142
Selected parameter is not a valid PDC parameter name.

Error ID
ERR_CL_PIOMB_INVALID_PDC_PARAM_NAME

Error name
CL_PIOMB_INVALID_PDC_PARAM_NAME

Cause
Selected parameter is not a valid PDC parameter name.

Solution
Select another parameter - the name must be in the format PDCxx where xx is a number from 1 to 16.

3.33.30 9143
The selected PDC parameter is already being used in an association with a PIOMB.

Error ID
ERR_CL_PIOMB_CANNOT_OVERWRITE_ASSOCIATION

Error name
CL_PIOMB_CANNOT_OVERWRITE_ASSOCIATION

Cause
The selected PDC parameter is already being used in association with a PIOMB.

Solution
Select another PDC parameter.

3.33.31 9144
Cannot find expected critical fields in PDC data.

791
3 ERROR CODES

Error ID
ERR_CL_PIOMB_CANNOT_READ_XML_DATA

Error name
CL_PIOMB_CANNOT_READ_XML_DATA

Cause
Invalid value or format of DSB PDC data XML parameter.

Solution
None known. Contact DE.

3.33.32 9145
Cannot read XML data from DSB block.

Error ID
ERR_CL_PIOMB_CANNOT_READ_XML_DATA_PARAM

Error name
CL_PIOMB_CANNOT_READ_XML_DATA_PARAM

Cause
No XML data in DSB PDC XML data parameter.

Solution
None known. Contact DE.

3.33.33 9146
This PDC is not configured in the DSB.

Error ID
ERR_CL_PIOMB_CANNOT_READ_XML_DATA_FOR_PDCXX

Error name
CL_PIOMB_CANNOT_READ_XML_DATA_FOR_PDCXX

Cause
No data available for this PDC in the DSB.

Solution
You must enter data for this PDC in the Sycon.NET tool and then in the DSB form.

3.33.34 9147
Cannot input PDC XML data into DOM

792 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_PIOMB_CANNOT_PUT_XML_DATA_INTO_DOM

Error name
CL_PIOMB_CANNOT_PUT_XML_DATA_INTO_DOM

Cause
Cannot input XML data into DOM - PutXmlString method failed.

Solution
None known. Contact DE.

3.33.35 9148
Cannot connect to XML DOM.

Error ID
ERR_CL_PIOMB_CANNOT_CONNECT_TO_DOM

Error name
CL_PIOMB_CANNOT_CONNECT_TO_DOM

Cause
Cannot connect to XML DOM - CoCreateInstance failed.

Solution
None known. Contact DE.

3.33.36 9149
Cannot set XML encoding to Unicode.

Error ID
ERR_CL_PIOMB_CANNOT_SET_XML_ENCODING

Error name
CL_PIOMB_CANNOT_SET_XML_ENCODING

Cause
Cannot set XML encoding to Unicode - createProcessingInstruction failed.

Solution
None known. Contact DE.

3.33.37 9150
Cannot append XML to DOM.

793
3 ERROR CODES

Error ID
ERR_CL_PIOMB_CANNOT_APPEND_XML

Error name
CL_PIOMB_CANNOT_APPEND_XML

Cause
Cannot append XML to DOM - appendChild failed.

Solution
None known. Contact DE.

3.33.38 9151
Cannot set XML schema.

Error ID
ERR_CL_PIOMB_CANNOT_SET_XML_SCHEMA

Error name
CL_PIOMB_CANNOT_SET_XML_SCHEMA

Cause
Cannot set XML schema - setAttribute failed.

Solution
None known. Contact DE

3.33.39 9152
Cannot validate XML schema.

Error ID
ERR_CL_PIOMB_CANNOT_VALIDATE_XML_SCHEMA

Error name
CL_PIOMB_CANNOT_VALIDATE_XML_SCHEMA

Cause
XML string is not valid according to the XML schema - validate method failed.

Solution
None known. Contact DE

3.33.40 9153
Cannot uninitialize XML.

794 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_PIOMB_XML_UNINIT

Error name
CL_PIOMB_XML_UNINIT

Cause
DOM Child objects cannot be released.

Solution
None known. Contact DE.

3.33.41 9154
Invalid DSB/PIOMB parameter name.

Error ID
ERR_CL_PIOMB_INVALID_PARAM_NAME

Error name
CL_PIOMB_INVALID_PARAM_NAME

Cause
Invalid parameter name - probably internal error.

Solution
None known. Contact DE.

3.33.42 9155
PGM IP address is blank.

Error ID
ERR_CL_CANNOT_LOAD_PIOMB_WITHOUT_PGM_IPADDRESS

Error name
CL_CANNOT_LOAD_PIOMB_WITHOUT_PGM_IPADDRESS

Cause
Cannot load PIOMB when the PGM IP address is blank.

Solution
Configure PGM IP address, then load again.

3.33.43 9156
Cannot unassign or delete a PIOMB when it has IO channel association.

795
3 ERROR CODES

Error ID
ERR_CL_CANNOT_UNASSIGN_PIOMB_WITH_IO_CHANNEL_ASSOC

Error name
CL_CANNOT_UNASSIGN_PIOMB_WITH_IO_CHANNEL_ASSOC

Cause
A PB IO channel is still associated with this PIOMB.

Solution
Disassociate all PB IO channels from this PIOMB.

3.33.44 9157
Cannot load a PIOMB unless it is associated with a DSB.

Error ID
ERR_CL_PIOMB_MUST_BE_ASSOC_WITH_DSB_FOR_LOAD

Error name
CL_PIOMB_MUST_BE_ASSOC_WITH_DSB_FOR_LOAD

Cause
PIOMB is not associated with a DSB.

Solution
Associate PIOMB with a DSB.

3.33.45 9161
This error occurs when the user has configured a group with no target and saves the strategy.

Error ID
ERR_CL_NO_TARGETS_IN_GROUP

Error name
None.

Cause
When the user has configured a group name without any target.

Solution
The user has to select atleast one target in group.

3.33.46 9170
The targets created by the user cannot have blank target in the middle.

796 www.honeywell.com
 3 ERROR CODES

For example, if the user creates a group namely, 'Group1' which has 5 targets (Target1, Target2, Target3, Target4
and Target5), these targets must have some value and cannot have blank target in the middle.

Error ID
ERR_CL_TARGET_IS_BLANK

Error name
None.

Cause
When the user configures a blank target for Jump Group.

Solution
The user has to select a valid target.

3.33.47 9177
The selected CEE is deleted.

Error ID
ERR_CL_CEE_VALUE_DELETION_CONFIRM

Error name
CL_CEE_VALUE_DELETION_CONFIRM

Cause
The deletion of the selected CEE is on the grid.

Solution
If you want to delete the CEE then select Yes else select No on the grid.

3.33.48 9178
The selected CEE is already available in the list.

Error ID
ERR_CL_CEE_ALREADY_EXIST

Error name
CL_CEE_ALREADY_EXIST

Cause
The CEE is currently selected is already available on the grid.

Solution
Select a different CEE that is not selected yet.

797
3 ERROR CODES

3.34 Codes 9181 to 9297

Related topics
“9181” on page 799
“9182” on page 800
“9183” on page 800
“9184” on page 801
“9185” on page 801
“9186” on page 802
“9187” on page 802
“9188” on page 803
“9189” on page 804
“9190” on page 804
“9191” on page 804
“9192” on page 805
“9193” on page 805
“9194” on page 806
“9195” on page 807
“9196” on page 807
“9197” on page 807
“9198” on page 808
“9199” on page 808
“9201” on page 808
“9202” on page 809
“9203” on page 809
“9204” on page 809
“9205” on page 810
“9206” on page 810
“9207” on page 810
“9208” on page 811
“9209” on page 811
“9210” on page 811
“9211” on page 812
“9212” on page 812
“9213” on page 812
“9214” on page 813
“9217” on page 813
“9218” on page 813
“9223” on page 814
“9224” on page 814
“9225” on page 814
“9226” on page 815
“9227” on page 815
“9251” on page 816
“9252” on page 816
“9253” on page 816
“9254” on page 817

798 www.honeywell.com
 3 ERROR CODES

“9255” on page 817

“9256” on page 817
“9257” on page 818
“9258” on page 818
“9259” on page 818
“9260” on page 819
“9275” on page 819
“9276” on page 819
“9278” on page 820
“9279” on page 820
“9280” on page 821
“9281” on page 821
“9282” on page 821
“9283” on page 822
“9284” on page 822
“9285” on page 822
“9286” on page 823
“9287” on page 823
“9288” on page 824
“9289” on page 824
“9290” on page 824
“9291” on page 825
“9292” on page 825
“9293” on page 825
“9294” on page 826
“9295” on page 826
“9296” on page 826
“9297” on page 827

3.34.1 9181
Simulation load failed as simulation is not supported for C300 - 20mS CEE.

Error ID
ERR_CL_SIMLOADNOSUPPORTFORC30020MS

Error name
CL_SIMLOADNOSUPPORTFORC30020MS

Cause
If the C300 Controller base period is configured as 20ms and it is trying to load in simulation environment, this
error displays and the loading operation is stopped.

Solution
Ensure that the platform simulation environment option is not selected when C300 Controller is configured with
the base period of 20ms.

799
3 ERROR CODES

3.34.2 9182
UCM module cannot be assigned to C300 - 20mS CEE since it is not supported by the C300 - 20mS CEE.

Error ID
ERR_CL_UCMASGNTOCEENOSUPPORTFORC30020MS

Error name
CL_UCMASGNTOCEENOSUPPORTFORC30020MS

Cause
If you try to assign the UCM to the C300 - 20msCEE, this error displays and UCM assignment is quit.

Solution
Ensure that the CEEC300 is not configured with the base period of 20ms.

3.34.3 9183
Control Module (CM) configured with non-supported blocks cannot be assigned to the C300 - 20mS CEE
controller.

Error ID
ERR_CL_BASICBLOCKNOSUPPORTFORC30020MS

Error name
CL_BASICBLOCKNOSUPPORTFORC30020MS

Cause
If the Control Module (CM) contains the blocks, which are incompatible with C300 - 20mS CEE, this error
displays and assignment is stopped. The incompatible blocks or modules are listed and cannot be configured in
CM.
• RCM
• UCM
• SCM
• REQFLAGARRAY
• REQNUMARRAY
• REQTEXTARRAY
• RSPFLAGARRAY
• RSPNUMARRAY
• RSPTEXTARRAY
• DNET_INCHAN
• DNET_OUTCHAN
• BIZERBASTIN
• BIZERBASTOUT
• ENCODERIN
• ENCODEROUT

800 www.honeywell.com
 3 ERROR CODES

• PBDIAGNOSTIC
• PBI_INCHAN
• PBI_OUTCHAN
• PROFIDRIVEIN
• PROFIDRIVEOUT
• SIMOCODE3UF5IN
• SIMOCODE3UF5OUT
• IN
• IN_D
• OUT
• OUT_D
• JAGXCHAN
• QIPACCHAN
• CAB
• CDB, and
• PHASE

Solution
Ensure that the Control Module (CM) does not contain the blocks that are incompatible with C300 - 20mS CEE.

3.34.4 9184
Control Module (CM) cannot be assigned to SIMCEEC300 (20ms) since the CM has SP and SVP modules,
which are not supported in simulation environment.

Error ID
ERR_CL_SPSVPBLOCKNOSUPPORTFORSIMC30020MS

Error name
CL_SPSVPBLOCKNOSUPPORTFORSIMC30020MS

Cause
If the Control Module (CM) contains SP or SVP module or channel and the CEEC300 is configured for 20ms in
simulation environment, this error displays and the CM assignment is quit.

Solution
Ensure that the simulation environment is not selected for the C300 - 20msCEE.

3.34.5 9185
Control Module (CM) including SP and SVP cannot be assigned to CEE, which is not configured with the base
period of 20ms.

Error ID
ERR_CL_SPSVPBLOCKNOSUPPORTFORNONC30020MS

Error name
CL_SPSVPBLOCKNOSUPPORTFORNONC30020MS

801
3 ERROR CODES

Cause
If the Control Module (CM) contains SP or SVP module or channel and the platform is C200E or CPM200, this
error displays and the CM assignment is quit.

Solution
Ensure that the CM containing the SP or SVP can only be assigned to the C300 - 20mS CEE platform.

3.34.6 9186
Cannot assign IOM (for example DNET_DEVICE) to C300 - 20mS CEE as this IOM is not supported in C300 -
20mS CEE.

Error ID
ERR_CL_IOMNOSUPPORTFORC30020MS

Error name
CL_IOMNOSUPPORTFORC30020MS

Cause
If you try to assign the incompatible IOM to the C300 (20ms), this error appears and the IOM assignment is
quit.
The following are the incompatible IOMs that are not supported on C300 - 20mS CEE platform.
• DNET_DEVICE
• DNET_IM
• BIZERBASTDEV
• ENCODERDEV
• PBI_DEVICE
• PBIM_SST
• PROFIDRIVEDEV
• SIMATIC_AI
• SIMATIC_AO
• SIMATIC_DI
• SIMATIC_DO
• SIMOCODE3UF5DEV
• JAGXTERM, and
• QIPACTERM

Solution
Ensure that the IOM is compatible with the C300 - 20.

3.34.7 9187
RCM or SCM modules cannot be assigned to C300 - 20msCEE since it is not supported in C300 - 20mS CEE.

Error ID
ERR_CL_SPSVPBLOCKNOSUPPORTFORNONC30020MS

802 www.honeywell.com
 3 ERROR CODES

Error name
CL_SCMASGNNOSUPPORTFORC30020MS

Cause
If you try to assign the RCM or SCM to C300 - 20mS CEE, this error displays and the module assignment is
stopped.

Solution
Ensure that the platform is not C300 - 20msCEE.

3.34.8 9188
Basic block cannot be assigned to the CM configured for C300 - 20mS CEE. The basic blocks are not supported
in the C300 - 20mS CEE.

Error ID
ERR_CL_BBASGNTOCMNOSUPPORTFORC30020MS

Error name
CL_BBASGNTOCMNOSUPPORTFORC30020MS

Cause
If you try to assign a basic block to a CM that is configured for the C300 - 20mS CEE, this error appears and the
block assignment is stopped. The C300 - 20mS CEE incompatible blocks or modules are listed.
• REQFLAGARRAY
• REQNUMARRAY
• REQTEXTARRAY
• RSPFLAGARRAY
• RSPNUMARRAY
• RSPTEXTARRAY
• DNET_INCHAN
• DNET_OUTCHAN
• BIZERBASTIN
• BIZERBASTOUT
• ENCODERIN
• ENCODEROUT
• PBDIAGNOSTIC
• PBI_INCHAN
• PBI_OUTCHAN
• PROFIDRIVEIN
• PROFIDRIVEOUT
• SIMOCODE3UF5IN
• SIMOCODE3UF5OUT
• IN
• IN_D
• OUT

803
3 ERROR CODES

• OUT_D
• JAGXCHAN
• QIPACCHAN
• CAB
• CDB, and
• PHASE

Solution
Ensure that the simulation environment option is not selected for C300 - 20mS CEE.

3.34.9 9189
SPM and SVPM channels cannot be assigned to the CM that is configured for SIM C300 - 20mS CEE since the
SP and SVP modules are not supported in simulation environment.

Error ID
ERR_CL_SPSVPASGNTOCMNOSUPPORTFORSIMC30020MS

Error name
CL_SPSVPASGNTOCMNOSUPPORTFORSIMC30020MS

Cause
If the CM is assigned to SIM C300 - 20mS CEE platform and SP or SVP module is assigned to the CM, this
error occurs and assignment is quit.

Solution
Ensure that the simulation environment option is not selected for C300 - 20mS CEE.

3.34.10 9190
SP and SVP channels cannot be assigned to the CM since the SP and SVP modules are supported only in the
C300 - 20mS CEE.

Error ID
ERR_CL_SPSVPASGNTOCMNOSUPPORTFORNONC30020MS

Error name
CL_SPSVPASGNTOCMNOSUPPORTFORNONC30020MS

Cause
If SP or SVP channel block is assigned to the CM, which is assigned to C200E or CPM200 or C300 50ms, this
error occurs and assignment is stopped.

Solution
Ensure that the platform is not C300 - 20msCEE.

3.34.11 9191
UCM cannot be loaded as the UCM is not supported in the C300 - 20mS CEE.

804 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_LOADUCMNOSUPPORTFORC30020MS

Error name
CL_LOADUCMNOSUPPORTFORC30020MS

Cause
If the UCM is tried to load on C300 - 20mS CEE, this error occurs and load is quit.

Solution
Remove the UCM from the C300 - 20mS CEE on Project view or change the C300 controller's base period.

3.34.12 9192
RCM or SCM cannot be loaded as the RCM or SCM is not supported in C300 - 20mS CEE.

Error ID
ERR_CL_LOADSCMNOSUPPORTFORC30020MS

Error name
CL_LOADSCMNOSUPPORTFORC30020MS

Cause
If the RCM or SCM is loaded on the C300 - 20mS CEE, this error occurs and load is stopped.

Solution
Ensure that the platform is not a C300 - 20mS CEE.

3.34.13 9193
Control Module (CM) cannot be assigned since some of the channels and blocks configured in this CM are not
supported in C300 - 20mS CEE.

Error ID
ERR_CL_LOADCMNOSUPPORTFORC30020MSWITHBB

Error name
CL_LOADCMNOSUPPORTFORC30020MSWITHBB

Cause
If the CM contains block that are incompatible with C300 - 20mS CEE and trying to load on C300 - 20mS CEE,
this error occurs and load is stopped. Following are the incompatible blocks in C300 - 20mS CEE and those
blocks cannot be configured in CM, RCM, UCM, and SCM are,
• REQFLAGARRAY
• REQNUMARRAY
• REQTEXTARRAY
• RSPFLAGARRAY

805
3 ERROR CODES

• RSPNUMARRAY
• RSPTEXTARRAY
• DNET_INCHAN
• DNET_OUTCHAN
• BIZERBASTIN
• BIZERBASTOUT
• ENCODERIN
• ENCODEROUT
• PBDIAGNOSTIC
• PBI_INCHAN
• PBI_OUTCHAN
• PROFIDRIVEIN
• PROFIDRIVEOUT
• SIMOCODE3UF5IN
• SIMOCODE3UF5OUT
• IN
• IN_D
• OUT
• OUT_D
• JAGXCHAN
• QIPACCHAN
• CAB
• CDB, and
• PHASE

Solution
Remove the C300 - 20 incompatible blocks from the Control Module.

3.34.14 9194
CM cannot be assigned since the SP or SVP channels configured in the CM are not supported in Simulation
C300 - 20mS CEE.

Error ID
ERR_CL_LOADCMNOSUPPORTFORSIMC30020MSWITHSPSVP

Error name
CL_LOADCMNOSUPPORTFORSIMC30020MSWITHSPSVP

Cause
If the CM contains the SP or SVP channel blocks and trying to load to the Simulation C300 - 20mS CEE, this
error occurs and load is stopped.

Solution
Ensure that the platform is not configured for Simulation in C300 - 20mS CEE.

806 www.honeywell.com
 3 ERROR CODES

3.34.15 9195
CM cannot be loaded as the SP or SVP channels configured in the CM are not supported in the non C300 -
20mS CEE platform.

Error ID
ERR_CL_LOADCMNOSUPPORTFORNONC30020MSWITHSPSVP

Error name
CL_LOADCMNOSUPPORTFORNONC30020MSWITHSPSVP

Cause
If the Control Module contains the SP or SVP modules and trying to load to the C200E or CPM200 or C300 -
50ms, this error occurs and load is stopped.

Solution
Remove SP or SVP block from the Control Module.

3.34.16 9196
CM cannot be loaded as the Simulation is not supported in C300 - 20mS CEE.

Error ID
ERR_CL_LOADCMNOSUPPORTFORSIMC30020MS

Error name
CL_LOADCMNOSUPPORTFORSIMC30020MS

Cause
If the Control Module is being loaded to the Simulation C300 - 20mS CEE, this error occurs and load is quit.

Solution
Ensure that the platform is not configured for Simulation in C300 - 20mS CEE.

3.34.17 9197
IOM cannot be loaded since this is not supported for C300 - 20mS CEE.

Error ID
ERR_CL_LOADIOMNOSUPPORTFORC30020MS

Error name
CL_LOADIOMNOSUPPORTFORC30020MS

Cause
If the DNET_IM, PBIM_SST, JAGXTERM, and QIPACTERM IOMs are being loaded and C300 base period is
configured for 20ms, this error occurs and load is terminated.

807
3 ERROR CODES

Solution
Ensure that the incompatible IOM must not be loaded when C300 base period is configured for 20ms.

3.34.18 9198
CM cannot be loaded to CEE because it contains blocks or IO connections that are not supported in C300 -
20mS CEE.

Error ID
ERR_CL_CEE_BASE_PD_NOTCOMPAT

Error name
CL_CEE_BASE_PD_NOTCOMPAT

Cause
CM contains the Blocks or IOC or Connections, which are incompatible with the existing base period (20ms).

Solution
Remove the incompatible Blocks or IOC or Connections from the CM or assign it to other CEE of different
base period.

3.34.19 9199
CEE BASEPERIOD cannot be changed because at least one module is assigned to C300 - 20mS CEE.

Error ID
ERR_CL_BASEPERIODCHANGEFAIL

Error name
CL_BASEPERIODCHANGEFAIL

Cause
C300 CEE BASEPERIOD change is prevented if at least a type of CM or an IOM has already been assigned.

Solution
Remove the modules assigned to CEEC300 and try configuring the base period parameter.

3.34.20 9201
Cannot load DSB block. The NETTAGNAME for the configured PDC is not configured.

Error ID
ERR_CL_DSB_NOLOADFORUNCONFPDC

Error name
CL_DSB_NOLOADFORUNCONFDSB

808 www.honeywell.com
 3 ERROR CODES

Cause
Trying to load a DSB with slave address which is not configured in PBLink.

Solution
Configure the NETTAGNAME for the PDC.

3.34.21 9202
Cannot unassign a DSB when one or more PIOMB is associated to this DSB.

Error ID
ERR_CL_DSB_UNASSIGNWHENPIOMBASSOC

Error name
CL_DSB_UNASSIGNWHENPIOMBASSOC

Cause
One or more PIOMB is referring to one or more PDCs owned by this DSB. Unassign cannot occur until the
PDCs of this DSB are disassociated from the PIOMB.

Solution
Disassociate the PDCs from PIOMB.

3.34.22 9203
Cannot configure NETTAGNAME as duplicate Tag Name is already configured.

Error ID
ERR_CL_DSB_CONFTAGNAME

Error name
CL_DSB_CONFTAGNAME

Cause
The given tag name is already configured with another NETTAGNAME[x] of DSB

Solution
Re-configure the NETTAGNAME[x] with a different tag name.

3.34.23 9204
Duplicate tag name exists.

Error ID
ERR_CL_DSB_TAGNAMEEXISTS

Error name
CL_DSB_TAGNAMEEXISTS

809
3 ERROR CODES

Cause
The given tag name already exists in NETTAGPDCNAME[x] of DSB.

Solution
Rename the tag name to ensure that it is unique.

3.34.24 9205
Configuration of NETTAGPDCNAME[0] is not allowed.

Error ID
ERR_CL_DSB_PDCNAME_NOTALLOWED

Error name
CL_DSB_PDCNAME_NOTALLOWED

Cause
You have attempted to change the NETTAGPDCNAME[0].

Solution
Do not change NETTAGPDCNAME[0], it must always be empty, used for undo NetTagName selections.

3.34.25 9206
Cannot change required PPO channel configuration.

Error ID
ERR_CL_DSB_REQ_PPO_CHANDATA

Error name
CL_DSB_REQ_PPO_CHANDATA

Cause
The parameter change is not allowed because it is required for channel configuration of PPO PDCs.

Solution
None

3.34.26 9207
Cannot have more than 2 PPO PDCs.

Error ID
ERR_CL_DSB_TOOMANYPPOPDCS

Error name
CL_DSB_TOOMANYPPOPDCS

810 www.honeywell.com
 3 ERROR CODES

Cause
Only two PPO type PDCs can be configured on a Generic Drive at any time.

Solution
Remove extra PPO PDCs, or reconfigure them as 'User Configurable' type.

3.34.27 9208
Cannot use PKW PDCs with selected PPO type.

Error ID
ERR_CL_DSB_PKWNOTSUPPORTED

Error name
CL_DSB_PKWNOTSUPPORTED

Cause
PKW acyclic parameter access is not supported with PPO type 3 or 4.

Solution
Change the PPO type of your PDCs to be 1, 2, or 5 (the ones that support PKW).

3.34.28 9209
Not a valid input PDC for use with alarms.

Error ID
ERR_CL_DSB_INVALIDINPUTPDC

Error name
CL_DSB_INVALIDINPUTPDC

Cause
The PDC index entered does not correspond to a valid input PDC.

Solution
Enter the PDC index of an input PDC which has already been configured.

3.34.29 9210
Invalid channel range values.

Error ID
ERR_CL_DSB_INVALIDCHRANGE

Error name
CL_DSB_INVALIDCHRANGE

811
3 ERROR CODES

Cause
The channel's range value is invalid. Valid ranges must have high range > low range, or both high and low range
with NaN values.

Solution
Ensure that all analog channels have high range > low range, or both are NaN.

3.34.30 9211
Cannot associate a PIOMB with a different PDC when it has IO channel association.

Error ID
ERR_CL_CANNOT_REASSOC_PIOMB_WITH_IO_CHANNEL_ASSOCc

Error name
CL_CANNOT_REASSOC_PIOMB_WITH_IO_CHANNEL_ASSOC

Cause
A Profibus IO channel is still associated with this PIOMB.

Solution
Disassociate all Profibus IO channels from this PIOMB.

3.34.31 9212
Exceeded count of PGMs with which one controller can communicate.

Error ID
ERR_CL_MAX_PGM_COUNT_EXCEEDED

Error name
CL_MAX_PGM_COUNT_EXCEEDED

Cause
A C300 can only communicate with 2 PGMs at most. This count has been exceeded.

Solution
Consolidate to communicate with fewer PGMs.

3.34.32 9213
Exceeded count of controllers with which one PGM can communicate.

Error ID
ERR_CL_MAX_CTRLR_COUNT_EXCEEDED

Error name
CL_MAX_CTRLR_COUNT_EXCEEDED

812 www.honeywell.com
 3 ERROR CODES

Cause
A PGM can only communicate with one C300 at most. This count has been exceeded.

Solution
Consolidate to communicate with fewer controllers.

3.34.33 9214
Wrong sensor type selection for selected IO module.

Error ID
ERR_CL_DSB_WRONG_SENSORTYPE_SELECTION

Error name
CL_DSB_WRONG_SENSORTYPE_SELECTION

Cause
AISENSORTYPE or AOSENSORTYPE selected is not valid for selected IO Module.

Solution
Select valid value of AISENSORTYPE or AOSENSORTYPE.

3.34.34 9217
Invalid name reference.

Error ID
ERR_CL_UCF_INVALID_EQUIP_NAMEREF

Error name
ERR_CL_EQ_INVALIDNAMEREF

Cause
A valid reference must reside in the same RCM or Master recipe and include one of the following:
• An alias parameter which refers to a block name.
• A Phase block EQUIPNAME parameter.
• A Unit block reference where the block reference type is compatible with EQUIPNAME.

Solution
Enter a valid equipment name reference.

3.34.35 9218
Activities are not supported for the RCM/SCM, if the Controller version is less than the R410 release.

Error ID
ERR_CL_ACTIVITY_NOTSUPPORTED

813
3 ERROR CODES

Error name
CL_ACTIVITY_NOTSUPPORTED

Cause
You have configured the activity options to create activities, but the controller does not support activities.

Solution
Reset the 'Activity Create' options to the default values.

3.34.36 9223
A name conflict has been detected between the non-CEE point and the CEE point. The tag point names have to
be unique in the Experion Server namespace.

Error ID
ERR_CL_NONERDBPOINTNAMECONFLICT

Error name
CL_NONERDBPOINTNAMECONFLICT

Cause
The non-CEE points name conflicts with the name present in the ERDB.

Solution
Rename the strategy in Experion and reconfigure the connection.

3.34.37 9224
The first parameter referenced by the indirect reference must reside within the container where the indirect
reference is configured.

Error ID
ERR_CL_INDIRECTNOTLOCAL

Error name
CL_INDIRECTNOTLOCAL

Cause
The parameter reference is assumed to be used for an indirect reference. The reference (described in the error)
has been resolved, but must be contained by the tag (also described in the error).

Solution
Make an indirect reference to a local connection, such as UNIT[1]. An example for a Master recipe is, if the
data needs to be accessed from the Master recipe, the data should be made available through the Unit class or
Unit instance through a Map block parameter or block reference.

3.34.38 9225
The parameter configured with ALTENBOPT=ON is not supported in this release (R410).

814 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ALTENBOPTNOTSUPPORTED4REL

Error name
CL_ALTENBOPTINVALID

Cause
The flag block configured with ALTENBOPT=ON is being loaded to a pre-R410 release where it is not
supported.

Solution
Correct the configuration and reload.

3.34.39 9226
The parameter has an invalid indirect reference that must be corrected.

Error ID
ERR_CL_INVALIDINDIRECTREF

Error name
CL_INVALIDINDIRECTREF

Cause
The source of the indirect reference has been modified, causing the indirect reference to become invalid.
For example MR.UNIT[1].MAP.PV.PREF, if the Map block is removed from the Unit class associated with
UNIT[1], the reference may be invalid.

Solution
Modify the indirect reference to refer to a valid source.

3.34.40 9227
Indirect references are not supported for uncontained blocks. Indirect reference cannot be provided.

Error ID
ERR_CL_INDIRECTNOTSUPPORTED_NOCONT

Error name
CL_INDIRECTNOTSUPPORTED_NOCONT

Cause
Feature of indirect reference is not supported for uncontained blocks. For example, indirect references cannot be
created on basic block templates.

Solution
Place the block inside a container before attempting to create the indirect reference.

815
3 ERROR CODES

3.34.41 9251
Number of channels entered is invalid.

Error ID
ERR_CL_DSB_INVALID_NUMCHANNEL

Error name
CL_DSB_INVALID_NUMCHANNEL

Cause
Number of channels entered is not supported by the DSB.

Solution
Enter valid number of channels. Refer documentation for number of channels supported for this DSB.

3.34.42 9252
The channel number entered is invalid.

Error ID
ERR_CL_DSB_INVALID_CHNNUMBER

Error name
CL_DSB_INVALID_CHNNUMBER

Cause
The channel number entered is incorrect. Range is from 0 to 3.

Solution
Enter the correct physical channel number from which the HART DATA is read.

3.34.43 9253
Cannot associate a PIOMB to a Gateway PDC.

Error ID
ERR_CL_PIOMB_CANNOT_ASSOC_WITH_GATEWAY_PDC

Error name
CL_PIOMB_CANNOT_ASSOC_WITH_GATEWAY_PDC

Cause
Cannot associate the PIOMB to a Gateway PDC.

Solution
None. Gateway PDCs cannot be associated with PIOMB.

816 www.honeywell.com
 3 ERROR CODES

3.34.44 9254
Cannot load DSB block, the block is configured for unconfigured PDC.

Error ID
ERR_CL_DSB_CANNOT_LOAD_UNCONF_PDC

Error name
CL_DSB_CANNOT_LOAD_UNCONF_PDC

Cause
The parameter is configured without configuring the PDC type.

Solution
Configure the PDC type for the PDC.

3.34.45 9255
Changes made in Field Network Configuration does not support 'Configuration in Run' (CiR).

Error ID
ERR_CL_PBLINK_CIR_LOAD_NOT_SUPPORTED

Error name
CL_PBLINK_CIR_LOAD_NOT_SUPPORTED

Cause
The Project side Network Configuration contains changes (like change any parameter in Bus Parameters,
Watchdog time of Master Settings, and so on in Master DTM configuration page of SYCON.net) that are not
compatible with Monitoring side Network Configuration to support 'Configuration in Run' (CiR) load.

Solution
Re-configure the Network Configuration and load the PBLINK block.

3.34.46 9256
Number of PDC entered is invalid.

Error ID
ERR_CL_DSB_INVALID_NUMPDC

Error name
CL_DSB_INVALID_NUMPDC

Cause
Number of PDC entered is not supported by the DSB.

817
3 ERROR CODES

Solution
Enter valid value of PDC.

3.34.47 9257
Invalid number of user defined alarms.

Error ID
ERR_CL_DSB_INVALID_NUMUSERALARMS

Error name
CL_DSB_INVALID_NUMUSERALARMS

Cause
Number of user defined alarms entered is not supported by the DSB.

Solution
Enter valid number of user defined alarms.

3.34.48 9258
Invalid signal type selection.

Error ID
ERR_CL_DSB_INVALID_SIGNALTYPE

Error name
CL_DSB_INVALID_SIGNALTYPE

Cause
Signal type selected is not valid for the channel.

Solution
Select the applicable signal type for this channel.

Attention
The first 4 channels of this PDC represent Process Data. Channels 5 and above represent HART data.

3.34.49 9259
Not allowed to decrease number of configurable PDCs if one or more PDCs are configured between PDC index
16 and 33.

Error ID
ERR_CL_DSB_NUMPDC_DECREASE_NOTALLOWED

Error name
CL_DSB_NUMPDC_DECREASE_NOTALLOWED

818 www.honeywell.com
 3 ERROR CODES

Cause
Net tag name of one or more PDCs are configured between PDC index 16 and 33.

Solution
Disassociate all the configured net tag names of the PDCs between PDC index 16 and 33.

3.34.50 9260
Invalid channel range value for the selected signal type.

Error ID
ERR_CL_DSB_INVALID_CHANNELRANGE

Error name
CL_DSB_INVALID_CHANNELRANGE

Cause
The channel's low or high range value is not valid for the selected signal type.

Solution
Select the applicable channel low/high range value for the signal type.

3.34.51 9275
The parameter is locked. Save and close the parameter and then retry.

Error ID
ERR_CL_NONERDBPOINT_LOCKED

Error name
CL_NONERDBPOINT_LOCKED

Cause
The Non-ERDB point was referred in the other strategy.

Solution
Save and close the other strategy first and then retry.

3.34.52 9276
Whole array size exceeds the maximum limits.

Error ID
EXPKS_E_CL_WA_PARAM_SIZE_MAX

Error name
CL_WA_PARAM_SIZE_MAX

819
3 ERROR CODES

Cause
You have tried to load arrayed blocks with whole array connection greater than 50 for NUMERICARRAY,
greater than 400 for FLAGARRAY, and greater than 22 x 8 characters for TEXTARRAY.

Solution
Correct the array size as follows:
• NUMERICARRAY: For whole array connection, the array size must be configured as less than or equal to
50.
• FLAGARRAY: For whole array connection, the array size must be configured as less than or equal to 400.
• TEXTARRAY: For whole array connection, the array size must be configured as a combination of
NSTRING value and STRLEN value as illustrated in the following table.

NSTRING value STRLEN value STR[n] range

3 64 [1..3]
6 32 [1..6]
11 16 [1..11]
22 8 [1..22]

3.34.53 9278
Cannot associate a PIOMB to a PDC which is not configured

Error ID
ERR_CL_PIOMB_CANNOT_ASSOC_WITH_UNCONF_PDC

Error name
CL_PIOMB_CANNOT_ASSOC_WITH_UNCONF_PDC

Cause
Cannot associate PIOMB when the PDC is not configured.

Solution
Configure the PDC, then associate it again or associate PIOMB to only PDCs which are already configured in
DSB.

3.34.54 9279
The cluster name of the cluster block cannot be blank.

Error ID
ERR_CL_ICP2P_CLUSTERNAME_BLANK

Error name
ERR_CL_ICP2P_CLUSTERNAME_BLANK

Cause
The configuration of the cluster name is not performed. It is an invalid cluster block configuration.

820 www.honeywell.com
 3 ERROR CODES

Solution
Check the cluster name first and then enter a valid cluster name.

3.34.55 9280
The cluster name for the cluster block cannot be changed

Error ID
ERR_CL_ICP2P_CLUSTERNAME_CHANGEFAIL

Error name
ERR_CL_ICP2P_CLUSTERNAME_CHANGEFAIL

Cause
The cluster name of a valid cluster block is attempted to be changed.

Solution
You must create a new cluster block with the new cluster name.

3.34.56 9281
The proxy node block is not valid since the proxy origin node does not exist in the origin cluster.

Error ID
ERR_CL_ICP2P_PROXYORIGINNODE_NOTEXIST

Error name
ERR_CL_ICP2P_PROXYORIGINNODE_NOTEXIST

Cause
This error occurs after the proxy node creation, import, or validation has been performed when the proxy origin
node name does not exist in the origin cluster.

Solution
Ensure to use a valid proxy node name.

3.34.57 9282
The proxy tag block is not valid since the proxy origin tag does not exist in the origin cluster.

Error ID
ERR_CL_ICP2P_PROXYORIGINTAG_NOTEXIST

Error name
ERR_CL_ICP2P_PROXYORIGINTAG_NOTEXIST

821
3 ERROR CODES

Cause
This error occurs after the proxy tag creation, import, or validation has been performed when the proxy origin
tag name does not exist in the origin cluster.

Solution
Ensure to use a valid proxy tag name.

3.34.58 9283
Connection to the remote ERDB fails due to an invalid logon.

Error ID
ERR_CL_ICP2P_LOGON_INVALID

Error name
ERR_CL_ICP2P_LOGON_INVALID

Cause
1. The remote ERDB logon requires a different credential compared to the local ERDB logon.
2. The remote ERDB is a non-Experion cluster, or an ACE node, or the ERDB version which is not the same as
the local ERDB.

Solution
• Configure the remote ERDB logon to be consistent with the local ERDB logon.
• Ensure that the remote cluster uses the same version as the local ERDB, or the remote cluster is an Experion
node.

3.34.59 9284
A proxy cluster block is already configured to represent the origin cluster.

Error ID
ERR_CL_ICP2P_CLUSTER_DUPLICATE

Error name
ERR_CL_ICP2P_CLUSTER_DUPLICATE

Cause
A proxy cluster with a cluster name that is used in another proxy cluster block in the ERDB has been attempted
to be created.

Solution
Configure the proxy cluster block with a different cluster name.

3.34.60 9285
The local cluster has an invalid cluster ID.

822 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ICP2P_LOCALCLUSTERID_INVALID

Error name
ERR_CL_ICP2P_LOCALCLUSTERID_INVALID

Cause
The Cluster ID on the local cluster is not configured appropriately. The Cluster ID must have a unique number
between 1 and 255.

Solution
Assign a unique value for the Cluster ID within the specified range for the local cluster.

3.34.61 9286
The origin cluster has an invalid Cluster ID.

Error ID
ERR_CL_ICP2P_REMOTECLUSTERID_INVALID

Error name
ERR_CL_ICP2P_REMOTECLUSTERID_INVALID

Cause
The Cluster ID on the origin cluster is not configured properly. It should be a unique number between 1 and
255.

Solution
Assign a unique value for the Cluster ID within the specified range for the local cluster.

3.34.62 9287
The local cluster and the origin cluster have the same Cluster ID.

Error ID
ERR_CL_ICP2P_CLUSTERID_CONFLICT

Error name
ERR_CL_ICP2P_CLUSTERID_CONFLICT

Cause
The local cluster and origin cluster have the same Cluster ID.

Solution
Assign a unique value for the Cluster ID within the specified range for the local cluster and the origin cluster.

823
3 ERROR CODES

3.34.63 9288
The origin cluster has schema version which does not support intercluster peer-to-peer communication.

Error ID
ERR_CL_ICP2P_ERDBVERSION_NOT_SUPPORTED

Error name
ERR_CL_ICP2P_ERDBVERSION_NOT_SUPPORTED

Cause
The origin cluster is on a pre-R410 release.

Solution
Ensure that the release version of the origin cluster is Experion R410 or later.

3.34.64 9289
The local cluster schema version cannot interoperate with the origin cluster schema version.

Error ID
ERR_CL_ICP2P_ERDBVERSION_CANT_INTEROP

Error name
ERR_CL_ICP2P_ERDBVERSION_CANT_INTEROP

Cause
The local cluster and the origin cluster are on releases that does not support intercluster peer-to-peer
communication interoperate.

Solution
Check the release version of the local cluster and the origin cluster. Ensure that they are on the releases that
support intercluster peer-to-peer communication interoperates.
If they are not, migrate the clusters that do not meet the requirement to an appropriate release.

3.34.65 9290
The cluster block of the block has an invalid template.

Error ID
ERR_CL_ICP2P_CLUSTERTEMPLATE_INVALID

Error name
ERR_CL_ICP2P_CLUSTERTEMPLATE_INVALID

Cause
The cluster block did not get created appropriately.

824 www.honeywell.com
 3 ERROR CODES

Solution
Fix the cluster block, and then re-import the block.

3.34.66 9291
The parent block of the block has an invalid template.

Error ID
ERR_CL_ICP2P_PARENTTEMPLATE_INVALID

Error name
ERR_CL_ICP2P_PARENTTEMPLATE_INVALID

Cause
The parent block did not get created appropriately.

Solution
Fix the parent block, and then re-import the block.

3.34.67 9292
The proxy tag block is not valid because it does not exist in the local cluster.

Error ID
ERR_CL_ICP2P_PHASEBLOCK_NOTEXIST

Error name
ERR_CL_ICP2P_PHASEBLOCK_NOTEXIST

Cause
The Phase block is not created in the local ERDB.

Solution
Import the Phase block to the local ERDB.

3.34.68 9293
The proxy tag block is not valid because its data block does not have the same parameter information as the
same phase type in the origin cluster.

Error ID
ERR_CL_ICP2P_PHASEBTYPE_INCONSISTENT

Error name
ERR_CL_ICP2P_PHASEBTYPE_INCONSISTENT

825
3 ERROR CODES

Cause
The parameters of the Phase block in the local cluster and the Phase Block with the same name in the origin
cluster are different.

Solution
Delete the local Phase block type and re-import the Phase block type from the origin cluster.

3.34.69 9294
Map block is not supported in this controller version.

Error ID
ERR_CL_MAPBLOCK_NOTSUPPORTED

Error name
ERR_CL_MAPBLOCK_NOTSUPPORTED

Cause
Map block is configured in the Unit class/UCM, but the controller does not support the Map block.

Solution
Remove the Map block from the Unit class/UCM and try to load it or load to a controller which is on R410 or
later release.

3.34.70 9295
Invalid Reference. Only SCM, RCM, MR, proxy SCM matching the Phase Type of Function Reference is
allowed as a target for function reference.

Error ID
ERR_CL_INVALID_FCNREF

Error name
ERR_CL_INVALID_FCNREF

Cause
A function reference is configured, but it does not match the rule 'Only SCM or RCM or MR or proxy SCM or
proxy RCM that has a data block and has the data block type matching with Type of Function Reference is
allowed.'

Solution
Re-configure the reference that has a matching type with the Type of the Function Reference.

3.34.71 9296
Does not match type.

Error ID
ERR_CL_TYPE_MISMATCH

826 www.honeywell.com
 3 ERROR CODES

Error name
ERR_CL_TYPE_MISMATCH

Cause
A function or basic block reference is configured, but does not satisfy the criteria in case of a function reference.
'Only SCM or RCM or MR or proxy SCM or proxy RCM that have a data block and have the data block type
matching with Type of Function Reference is allowed.'
However, with block reference, 'Reference Type should match with the Type configured.'

Solution
Re-configure the reference that has a matching type with the 'Type of the Reference.'

3.34.72 9297
Invalid Reference. Blocks having special connection processing are excluded.

Error ID
ERR_CL_INVALID_PREF

Error name
ERR_CL_INVALID_PREF

Cause
Invalid block's parameter is configured as a reference. The current blocks that are excluded are FF blocks, EHG
blocks, wireless blocks, the REE block, and the UCN I/F block.

Solution
Reconfigure the reference that is not in the excluded list of blocks.

827
3 ERROR CODES

3.35 Codes 9300 to 9452

Related topics
“9300” on page 830
“9301” on page 830
“9302” on page 831
“9303” on page 832
“9304” on page 832
“9305” on page 832
“9306” on page 833
“9307” on page 833
“9308” on page 833
“9310” on page 834
“9311” on page 834
“9312” on page 834
“9313” on page 835
“9314” on page 835
“9315” on page 835
“9316” on page 836
“9317” on page 836
“9318” on page 836
“9319” on page 837
“9320” on page 837
“9321” on page 838
“9322” on page 838
“9323” on page 838
“9324” on page 839
“9325” on page 839
“9326” on page 839
“9327” on page 840
“9329” on page 840
“9330” on page 840
“9331” on page 841
“9340” on page 841
“9341” on page 841
“9342” on page 842
“9343” on page 842
“9344” on page 842
“9345” on page 843
“9346” on page 843
“9347” on page 843
“9348” on page 844
“9349” on page 844
“9350” on page 844
“9351” on page 845
“9352” on page 845
“9353” on page 845

828 www.honeywell.com
 3 ERROR CODES

“9356” on page 846

“9357” on page 846
“9358” on page 846
“9359” on page 847
“9360” on page 847
“9361” on page 848
“9362” on page 848
“9363” on page 848
“9364” on page 849
“9365” on page 849
“9366” on page 849
“9367” on page 850
“9368” on page 850
“9369” on page 851
“9370” on page 851
“9371” on page 851
“9372” on page 852
“9373” on page 852
“9374” on page 852
“9375” on page 853
“9376” on page 853
“9377” on page 854
“9378” on page 854
“9379” on page 854
“9380” on page 855
“9381” on page 855
“9382” on page 855
“9383” on page 856
“9384” on page 856
“9385” on page 856
“9386” on page 857
“9387” on page 858
“9388” on page 858
“9389” on page 858
“9390” on page 859
“9391” on page 859
“9392” on page 859
“9393” on page 860
“9394” on page 860
“9395” on page 860
“9396” on page 861
“9397” on page 861
“9398” on page 861
“9406” on page 862
“9407” on page 862
“9408” on page 863
“9421” on page 863
“9422” on page 863

829
3 ERROR CODES

“9423” on page 864

“9424” on page 864
“9425” on page 864
“9426” on page 865
“9427” on page 865
“9428” on page 865
“9429” on page 866
“9430” on page 866
“9441” on page 867
“9442” on page 867
“9443” on page 867
“9452” on page 868

3.35.1 9300
Unit instance has already been configured for Unit selection in the Master recipe.

Error ID
ERR_CL_CBR_UNIT_INSTANCE_EXISTS

Error name
ERR_CL_CBR_UNIT_INSTANCE_EXISTS

Cause
A Unit instance can only be configured once for the Unit selection as it has only one choice associated with it.

Solution
None

3.35.2 9301
The referred non-CEE point must be published from the corresponding subsystem to the System Repository.
or
The Experion Server point must be built in the Server to successfully configure and load the non-CEE peer
reference.

Error ID
ERR_CL_P2P_GETPARAMINFOFROMSRFAILED

Error name
CL_P2P_GETPARAMINFOFROMSRFAILED

Cause
• The non-CEE parameter or point, which is configured in the strategy, is deleted from the subsystem.
• The non-CEE parameter or point, which is configured in the strategy, is renamed from the subsystem.
• There is a change in the subsystem for a non-CEE parameter (example, SM to PMD with same point
parameter) after the initial configuration.

830 www.honeywell.com
 3 ERROR CODES

• Data type change of non-CEE parameter.

Solution
• If the non-CEE parameter or point is deleted, perform the following steps.
1. Verify that the non-CEE point or parameter exists in the subsystem.
2. Republish the point or parameter if the non-CEE parameter does not exist. In case of Experion Server
subsystem, republishing the non-CEE parameter is not required as the SR determines it from the server.
• If the non-CEE parameter or point is renamed, perform the following steps.
1. Delete the references of the non-CEE parameter from Monitoring and Project view of the Control
Builder.
2. Delete the strategy that is configured with the above non-CEE parameter from Monitoring view as there
is no reference deletion in the Project view.
3. Reconfigure to the new non-CEE parameter.
4. Load the strategy.
• If there is a change in strategy after the initial configuration, perform the following steps.
1. Delete the references of the non-CEE parameter from the Monitoring and Project view of the Control
Builder.
2. Delete the strategy that is configured with the above non-CEE parameter from Monitoring view as there
is no reference deletion in the Project view.
• If the data type of the non-CEE parameter is changed, perform the following steps.
1. Delete the references of the non-CEE parameter from the Monitoring and Project view of the Control
Builder.
2. Delete the strategy that is configured with the above non-CEE parameter from Monitoring view as there
is no reference deletion in the Project view.
3. Clear the 'Non ERDB Dangling Connections' from DbAdmin.
4. Restart the Control Builder if there are any 'Non ERDB Dangling Connections.'
5. Reconfigure or import the non-CEE parameter to the new Data Type pin in all strategies.
6. Load the strategy.

3.35.3 9302
The load of the non-CEE peer reference to the controller has failed because the current Controller firmware
does not support non-CEE peer references.

Error ID
ERR_CL_P2P_NOT_SUP_CONT_FWRELEASE

Error name
CL_P2P_NOT_SUP_CONT_FWRELEASE

Cause
Controller firmware version does not support non-CEE points in connection.

Solution
Only R410 or greater firmware supports non-CEE connections. Recommend to upgrade the firmware.

831
3 ERROR CODES

3.35.4 9303
The parameter cannot be removed or changed because it is referenced by the Master recipe.

Error ID
ERR_CL_CBR_UNIT_IN_USE

Error name
ERR_CL_CBR_UNIT_IN_USE

Cause
The Unit class in unit configuration is used in the Master Recipe.

Solution
Use the browser to identify where the parameter is referenced and remove the references.

3.35.5 9304
Cannot reserve PCM number for the controller

Error ID
ERR_CL_RESERVE_PCM_NUMBER_FAILED_IN_SR

Error name
CL_RESERVE_PCM_NUMBER_FAILED_IN_SR

Cause
• System Repository (SR) service is not running/responding.
• Configuration Studio is connected to incorrect primary server.
• PCM Number exhausted in System Repository.

Solution
• Start the SR service, if the SR service is not running.
• After server switch over, reconnect the Configuration Studio to the correct primary server.
• No workaround if the PCM number exhausted the SR.

3.35.6 9305
Invalid Unit class Block.

Error ID
ERR_CL_CBR_INVALID_UNITCLASS

Error name
ERR_CL_CBR_INVALID_UNITCLASS

832 www.honeywell.com
 3 ERROR CODES

Cause
The configured block is not a valid Unit class block.

Solution
None. Unit class should be configured with a valid Unit class block like Unit class templates, Unit class user
templates, Unit class instances, UCMs, UCM's user-defined template.

3.35.7 9306
Unit configuration cannot be empty when Unit class is configured to Unit instance.

Error ID
ERR_CL_INVALIDUNIT_CONFIGURED_2

Error name
ERR_CL_INVALIDUNIT_CONFIGURED_2

Cause
The Unit configuration is set to empty, when Unit class is configured to Unit instances.

Solution
None. Unit cannot be set to empty when a Unit class is configured to Unit instance.

3.35.8 9307
The Unit cannot be configured before configuring the Unit class.

Error ID
ERR_CL_INVALIDUNIT_CONFIGURED_3

Error name
ERR_CL_INVALIDUNIT_CONFIGURED_3

Cause
The Unit is configured before configuring the Unit class.

Solution
Configure the Unit class before configuring the Unit.

3.35.9 9308
Unit name cannot be empty.

Error ID
ERR_CL_UNITNAME_EMPTY

Error name
ERR_CL_UNITNAME_EMPTY

833
3 ERROR CODES

Cause
The Unit name is set to empty when Unit class is configured.

Solution
Provide a unique Unit name.

3.35.10 9310
There are duplicate enumerations in the enumeration set.

Error ID
ERR_CL_ENUM_DUPLICATE

Error name
ERR_CL_ENUM_DUPLICATE

Cause
Enumeration set contains duplicate values of enumeration set members in the Phase block.

Solution
Reconfigure the enumeration set. Remove any invalid or duplicate enumeration set member entry.

3.35.11 9311
'Enumeration Set Member Ordinal Value' may not be changed because the enumeration set is in use by a UDT
or a strategy.

Error ID
ERR_CL_ENUM_ORDINAL_CHG_WHILETEMPLATESEXIST

Error name
ERR_CL_ENUM_ORDINAL_CHG_WHILETEMPLATESEXIST

Cause
Enumeration set has been referenced by any formula or report parameter in the Phase block.

Solution
Ensure that enumeration set has not been referenced.

3.35.12 9312
Enumeration set member may not be deleted because the block where enumeration set is in use has been
contained by a container UDT or strategy.

Error ID
ERR_CL_ENUM_DEL_WHILETEMPLATESEXIST

834 www.honeywell.com
 3 ERROR CODES

Error name
ERR_CL_ENUM_DEL_WHILETEMPLATESEXIST

Cause
Enumeration set has been referenced by any formula or report parameter in the Phase block.

Solution
Ensure that the enumeration set has not been referenced.

3.35.13 9313
Enumeration set is in use by a loaded strategy. String changes affect the operation of strategy.

Error ID
WARNING_CL_ENUM_STRING_CHG_WHILETEMPLATESEXIST

Error name
WARNING_CL_ENUM_STRING_CHG_WHILETEMPLATESEXIST

Cause
This error occurs if you rename the enumeration string, then the new string is reflected in the Monitoring view.

Solution
None

3.35.14 9314
Unknown error is encountered during import of Enumeration.

Error ID
ERR_CL_IMPORT_ENUMERATION

Error name
ERR_CL_COPY_ENUM_SET_MEMBERS

Cause
This error occurs when the enumeration set members have not been imported successfully.

Solution
None

3.35.15 9315
Failed to create a parameter 'as referenced public enumeration set' is not found in the database.

Error ID
ERR_CL_IXP_INVALIDENUMERATIONSET

835
3 ERROR CODES

Error name
CL_IXP_INVALIDENUMERATIONSET

Cause
Parameter refers a public enumeration set that is not found in the database.

Solution
Import block with the public enumeration holder containing public enumeration referred by the parameter.

3.35.16 9316
Enumeration set cannot be deleted as it is referenced by one or more parameters.

Error ID
ERR_CL_PARAMDEL_WHILEREFERENCEEXIST

Error name
PARAMDEL_WHILEREFERENCEEXIST

Cause
Enumeration set cannot be deleted when one or more parameters of enumeration type have been defined using
the enumeration set.

Solution
Delete all the parameters of enumeration type that are defined using enumeration set name before deleting the
enumeration set.

3.35.17 9317
Public enumeration holder may not be deleted because it contains enumeration sets.

Error ID
ERR_CL_ENUM_HOLDER_DELETE

Error name
ENUM_HOLDER_DELETE

Cause
Enumeration holder cannot be deleted when one or more enumeration set exists.

Solution
Delete all public enumeration sets associated with the enumeration holder before deleting the enumeration
holder.

3.35.18 9318
Enumeration set member of the public enumeration set is not found in the database.

836 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ENUMERATIONMEMBERNOTFOUND

Error name
ENUMERATIONMEMBERNOTFOUND

Cause
This error occurs when the enumeration set members associated with the enumeration set does not exist in the
database.

Solution
None

3.35.19 9319
Public enumeration set is not found in the database.

Error ID
ERR_CL_ENUMERATIONNOTFOUND

Error name
ENUMERATIONNOTFOUND

Cause
Existing public enumeration set has been deleted or modified.

Solution
Open the public enumeration holder block type PDE and save it.

3.35.20 9320
Cannot change PULSEINTYPE to 'Pulse Input with Fast Cutoff' when INPUTSTREAM is Dual Stream.

Error ID
ERR_CL_PI_FCO_INPUTSTREAM_INCONSISTENT

Error name
ERR_CL_PI_FCO_INPUTSTREAM_INCONSISTENT

Cause
PULSEINTYPE is changed to 'Pulse Input with Fast Cutoff' when INPUTSTREAM is already set to 'Dual
Stream.'

Solution
INPUTSTREAM should be changed to 'Single Stream' before PULSEINTYPE is changed to 'Pulse Input with
Fast Cutoff.'

837
3 ERROR CODES

3.35.21 9321
Channel does not support Fast Cutoff.

Error ID
ERR_CL_PI_FCO_CHANNUM_INCONSISTENT

Error name
CL_PI_FCO_CHANNUM_INCONSISTENT

Cause
Channels other than 7 or 8 are configured for Fast Cutoff.

Solution
Ensure that you only configure channel 7 and channel 8 for Fast Cutoff.

3.35.22 9322
Channel cannot be configured for Dual Stream.

Error ID
ERR_CL_PI_FCO_PARTNERCHANNELCONTAINED

Error name
CL_PI_FCO_PARTNERCHANNELCONTAINED

Cause
If the Control Module (CM) contains channels (n, n+1) where n is 1, 3, 5, or 7, and you try to configure channel
n as dual stream, this error appears.
For example if the CM contains channels 3 and 4, and you try to configure channel 3 as Dual Stream, this error
appears.

Solution
Delete the even-numbered channels (n+1) from the CM if you want to configure channels (n) for Dual Stream.
For example, if the CM contains channels 3 and 4, to configure channel 3 for Dual Stream, you must delete
channel 4 from the CM.

3.35.23 9323
Even-numbered channels cannot be configured for Dual stream.

Error ID
ERR_CL_PI_FCO_DUALSTREAM_CHANNUM_INCONSISTENT

Error name
CL_PI_FCO_DUALSTREAM_CHANNUM_INCONSISTENT

838 www.honeywell.com
 3 ERROR CODES

Cause
If you try to configure even numbered channels (2, 4, 6, or 8) for Dual Stream, this error appears.

Solution
Ensure that you only configure the odd numbered channels (1, 3, 5, 0r 7) for Dual Stream.

3.35.24 9324
For INPUTSTREAM of %s, not expected to have %s connection configured.

Error ID
ERR_CL_PI_INPUTSTREAM_INCONSISTENT

Error name
ERR_CL_PI_INPUTSTREAM_INCONSISTENT

Cause
Pin connection is inconsistent with configured INPUTSTREAM.

Solution
Change the input connections to match INPUTSTREAM.

3.35.25 9325
For PULSEINTYPE of %s, not expected to have %s connection configured.

Error ID
ERR_CL_PI_PULSEINTYPE_INCONSISTENT

Error name
ERR_CL_PI_PULSEINTYPE_INCONSISTENT

Cause
Pin connection is inconsistent with configured PULSEINTYPE.

Solution
Change the input connections to match PULSEINTYPE.

3.35.26 9326
The Selected block %s is not valid for assignment as the odd-numbered associated channel is configured for
Dual Stream.

Error ID
ERR_CL_PI_INVBLKFORASSIGN

Error name
ERR_CL_PI_INVBLKFORASSIGN

839
3 ERROR CODES

Cause
You have tried to import a CM containing an even-numbered PICHANNEL block when the odd-numbered
associated channel is configured for Dual Stream.

Solution
Configure the odd-numbered associated channel as Single Stream.

3.35.27 9327
An instance parameter cannot reference an alias parameter.

Error ID
ERR_CL_ALIASREFISALIAS

Error name
CL_ALIASREFISALIAS

Cause
An attempt was made to enter a reference to an alias parameter as an instance in the active load.

Solution
None

3.35.28 9329
The selected SCM's Active Load contains references to this CM. Blocks in this CM that are configured to track
the SCM continues to track even if they are not in the currently selected instance.

Error ID
ERR_CL_ALIASCMSETFIXED

Error name
CL_ALIASCMSETFIXED

Cause
None.

Solution
None.

3.35.29 9330
TEMPHILM must be greater than TEMPLOLM.

Error ID
ERR_CL_UIO_TEMPLIMIT_INCONSISTENT

840 www.honeywell.com
 3 ERROR CODES

Error name
CL_UIO_TEMPLIMIT_INCONSISTENT

Cause
TEMPHILM is set to be less than or equal to TEMPLOLM, or TEMPLOLM is set to be greater than or equal to
TEMPHILM.

Solution
Set TEMPHILM to a value greater than TEMPLOLM, or set TEMPLOLM to a value less than TEMPHILM.

3.35.30 9331
Operation may not be performed while the channel is contained in a CM

Error ID
ERR_CL_UIO_ILLEGALOP_CONTAINED

Error name
CL_UIO_ILLEGALOP_CONTAINED

Cause
Operation is attempted to be performed while the channel is contained in a CM.

Solution
Delete or unassign the channel from the CM.

3.35.31 9340
Block is not supported for validation.

Error ID
ERR_CL_VALIDATION_NOTSUPPORTED

Error name
CL_VALIDATE_NOTSUPPORTED

Cause
Selection list of validate block and references contains control which is not supported for validation.

Solution
None

3.35.32 9341
Validation has failed.

Error ID
ERR_CL_VALIDATION_REF_FAIL

841
3 ERROR CODES

Error name
CL_VALIDATE_REF_FAIL

Cause
Improper configuration is detected during the validation of references in a block.

Solution
Take corrective actions based on the error code.

3.35.33 9342
Indicates the start of validation.

Error ID
ERR_CL_VALIDATION_START_OPERATION

Error name
CL_VALIDATE_START_OP

Cause
None

Solution
None

3.35.34 9343
Indicates the end of validation.

Error ID
ERR_CL_VALIDATION_END_OPERATION

Error name
CL_VALIDATE_END_OP

Cause
None

Solution
None

3.35.35 9344
Indicates that the user has cancelled the validation.

Error ID
ERR_CL_VALIDATION_CANCEL

842 www.honeywell.com
 3 ERROR CODES

Error name
CL_VALIDATE_CANCEL

Cause
User has cancelled the validation operation.

Solution
None

3.35.36 9345
Indicates the validation status of the block.

Error ID
ERR_CL_VALIDATION_BLK_STATUS

Error name
CL_VALIDATE_BLK_STATUS

Cause
None

Solution
None

3.35.37 9346
Indicate the start of validation of the block.

Error ID
ERR_CL_VALIDATION_BLK_START

Error name
CL_VALIDATE_BLK_START

Cause
None

Solution
None

3.35.38 9347
Indicates the end of validation of the block

Error ID
ERR_CL_VALIDATION_BLK_END

843
3 ERROR CODES

Error name
CL_VALIDATE_BLK_END

Cause
None

Solution
None

3.35.39 9348
Indicates that validation of the block is cancelled or aborted by user

Error ID
ERR_CL_VALIDATION_BLK_ABORT

Error name
CL_VALIDATE_BLK_ABORT

Cause
None

Solution
None

3.35.40 9349
The read failed for the OPC reference parameter(s) with the error code.

Error ID
ERR_CL_VALIDATION_OPCREF_ERROR

Error name
CL_VALIDATE_OPCREF_ERROR

Cause
The OPC point parameter referenced is not valid, or there was some error encountered while reading the OPC
parameter value.

Solution
Check the workaround in the log file.

3.35.41 9350
Describes the validation summary status of the references.

Error ID
ERR_CL_VALIDATION_REFTYPE_STATUS

844 www.honeywell.com
 3 ERROR CODES

Error name
CL_VALIDATE_REFERENCES_STATUS

Cause
None

Solution
None

3.35.42 9351
Missing reference found for block parameter.

Error ID
ERR_CL_VALIDATION_DANGLING_REF

Error name
CL_VALIDATE_DANGLING_REF

Cause
The other end of the block parameter or a connection is not found or has been deleted from the ER database.

Solution
Reconfigure the parameter value or the connection for the block parameter mentioned in the error.

3.35.43 9352
OPC connections to the whole array parameter is not supported for validation. The connection is not validated.

Error ID
ERR_CL_VALIDATION_OPC_WA_NOTSUPPORTED

Error name
CL_VALIDATE_OPC_WA_NOTSUPPORTED

Cause
CDA reads that the whole array is not supported; hence, validation of the whole array parameter references is
not supported.

Solution
None

3.35.44 9353
Validation of OPC references are not supported for the Project view.

Error ID
ERR_CL_VALIDATION_OPC_PROJ_NOTSUPPORTED

845
3 ERROR CODES

Error name
CL_VALIDATE_OPC_PROJ_NOTSUPPORTED

Cause
Validation of OPC references are not supported for the Project view.

Solution
OPC references can be validated only from the Monitoring view.

3.35.45 9356
Access Denied: Your sign in account is not configured with one or more capabilities required to access the
Builder.

Error ID
ERR_CL_LACK_OF_CAPABILITY

Error name
CL_LACK_OF_CAPABILITY

Cause
You are trying to login either as a non-interactive user or you do not have one or more capabilities required to
access the Builder.

Solution
None. You need to have the required capabilities to access the Builder. Contact your System Administrator for
more information.

3.35.46 9357
The proxy tag block is not valid because the proxy origin tag block has been reassigned in the origin cluster.

Error ID
ERR_CL_ICP2P_PARENT_CHANGED

Error name
ERR_CL_ICP2P_PARENT_CHANGED

Cause
This error occurs after the proxy tag validation has been performed when proxy origin tag is reassigned.

Solution
Select Update option from the Proxy Tag Validation form.

3.35.47 9358
The proxy tag block has been corrected because of the recreation of proxy origin tag blocks in the origin cluster.

846 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ICP2P_PROXYTAGIOC_CHANGED

Error name
ERR_CL_ICP2P_PROXYTAGIOC_CHANGED

Cause
This error occurs after the proxy tag validation has been performed when the proxy origin tag is recreated (may
be deleted and recreated).

Solution
None

3.35.48 9359
The proxy block is not valid because there is no cluster name configured.

Error ID
ERR_CL_ICP2P_CLUSTERNAME_EMPTY

Error name
ERR_CL_ICP2P_CLUSTERNAME_EMPTY

Cause
The cluster name that is configured for the proxy block is lost during the import and export operation.

Solution
Delete the proxy block and create a new proxy block with the cluster name automatically filled in by system.

3.35.49 9360
The proxy block is not valid because there is no parent name configured.

Error ID
ERR_CL_ICP2P_PARENTNAME_EMPTY

Error name
ERR_CL_ICP2P_PARENTNAME_EMPTY

Cause
The parent name that is configured for the proxy block is lost during the import and export operation.

Solution
Delete the proxy block and create a new proxy block with the parent name automatically filled in by system.

847
3 ERROR CODES

3.35.50 9361
The proxy tag block is not valid because the type in local cluster is different than the proxy origin tag name type
in the origin cluster.

Error ID
ERR_CL_ICP2P_PROXYTAGTYPE_INVALID

Error name
ERR_CL_ICP2P_PROXYTAGTYPE_INVALID

Cause
This error occurs after the proxy tag creation, import, or validation has been performed when the proxy origin
tag type is different.

Solution
Delete the proxy tag and create a new proxy tag block with the appropriate type.

3.35.51 9362
The proxy tag block is not valid because the proxy origin tag block is unassigned in the origin cluster.

Error ID
ERR_CL_ICP2P_UNASSIGNED_INVALID

Error name
ERR_CL_ICP2P_UNASSIGNED_INVALID

Cause
This error occurs after the proxy tag creation, import, or validation has been performed when the proxy origin
tag is unassigned.

Solution
Delete the proxy tag.

3.35.52 9363
The proxy tag block is not valid because the parent proxy origin node does not exist in the local cluster.

Error ID
ERR_CL_ICP2P_PROXYNODE_NOTEXIST

Error name
ERR_CL_ICP2P_PROXYNODE_NOTEXIST

848 www.honeywell.com
 3 ERROR CODES

Cause
This error occurs after the proxy tag import or validation operation has been performed when the proxy origin
tag is reassigned to a different proxy origin node block in the origin cluster. However, the proxy node block has
not been created in the local cluster.

Solution
Create the proxy node block in the local cluster block, and then run the proxy tag import or validation operation
again.

3.35.53 9364
The communication number that the proxy block is assigned to is being used by another controller.

Error ID
ERR_CL_ICP2P_EEC_INVALID

Error name
ERR_CL_ICP2P_EEC_INVALID

Cause
This error occurs after the proxy creation, import, or validation operation has been performed when there is a
conflict in the communication number of the proxy origin node in the origin cluster and another controller in the
local cluster.

Solution
Use the Manage Inter Cluster Peer to Peer Utility to reorganize the communication number for the impacted
proxy origin node in the origin cluster, and the controller has the same communication number in the local
cluster.

3.35.54 9365
The proxy tag data block is deleted because no data block is configured on the proxy origin tag block in the
origin cluster.

Error ID
ERR_CL_ICP2P_DATA_REMOVED

Error name
ERR_CL_ICP2P_DATA_REMOVED

Cause
This error occurs after the proxy tag validation is performed when the proxy origin tag data block is deleted.

Solution
None

3.35.55 9366
Data block is added to the proxy tag block because this data block is added to the proxy origin tag block in the
origin cluster. Any reference to this proxy tag data block needs to be reloaded.

849
3 ERROR CODES

Error ID
ERR_CL_ICP2P_DATA_NEW

Error name
ERR_CL_ICP2P_DATA_NEW

Cause
This error occurs after the proxy tag validation is performed when the proxy origin tag data block is added.

Solution
Select Update option from the Proxy Tag Validation form.

3.35.56 9367
The previous data block is no longer valid and a new data block needs to be added to the proxy tag block.
Because, the proxy origin tag data block has changed in the origin cluster. After updating any reference to the
proxy tag, reload the data block.

Error ID
ERR_CL_ICP2P_DATA_CHANGED

Error name
ERR_CL_ICP2P_DATA_CHANGED

Cause
This error occurs after the proxy tag validation is performed when the proxy origin tag data block is modified.

Solution
Select Update option from the Proxy Tag Validation form.

3.35.57 9368
The proxy tag block is corrected because the proxy origin tag data block is recreated in the origin cluster. Any
reference to this proxy tag data block needs to be reloaded.

Error ID
ERR_CL_ICP2P_DATADOC_CHANGED

Error name
ERR_CL_ICP2P_DATADOC_CHANGED

Cause
This error occurs after the proxy tag validation has been performed when the same proxy origin tag data block is
added to the proxy origin tag block.

Solution
None

850 www.honeywell.com
 3 ERROR CODES

3.35.58 9369
The proxy node block is not valid because the communication path of the proxy origin node is blank.

Error ID
ERR_CL_ICP2P_COMMPATH_BLANK

Error name
ERR_CL_ICP2P_COMMPATH_BLANK

Cause
This error occurs after the proxy node creation, import, or validation has been performed. The communication
path of the proxy origin node is blank.

Solution
Configure the proxy origin node block IP address, Device Index, or Network Configuration and reconfigure the
import of the validated proxy node.

3.35.59 9370
The proxy node block is not valid because the proxy origin node type is not supported.

Error ID
ERR_CL_ICP2P_NODETYPE_INVALID

Error name
ERR_CL_ICP2P_NODETYPE_INVALID

Cause
This error occurs after the proxy node creation, import, or validation has been performed. The node type of the
proxy origin node block is not supported by intercluster peer-to-peer communication proxy node configuration.
The supported node types are C300, C200E, and ACE.

Solution
Ensure that the proxy origin node is valid or delete the proxy node.

3.35.60 9371
The proxy node block has been corrected because the proxy node type of the proxy origin node block has been
changed in the origin cluster. Any reference to its child proxy tag block needs to be reloaded.

Error ID
ERR_CL_ICP2P_NODETYPE_CHD

Error name
ERR_CL_ICP2P_NODETYPE_CHD

851
3 ERROR CODES

Cause
This error occurs after the proxy node creation, import, or validation has been performed. The node type of the
proxy origin node block is changed in the origin cluster.

Solution
None

3.35.61 9372
The proxy node block has been corrected because the IP Address of the proxy origin node block has been
changed in the origin cluster. Any reference to its child proxy tag block needs to be reloaded.

Error ID
ERR_CL_ICP2P_IPADDRESS_CHD

Error name
ERR_CL_ICP2P_IPADDRESS_CHD

Cause
This error occurs after the proxy node creation, import, or validation has been performed. The IP Address of the
proxy origin node block is changed in the origin cluster.

Solution
None

3.35.62 9373
The proxy node block is not valid because the proxy origin node is a secondary block.

Error ID
ERR_CL_ICP2P_PROXYNODE_SECONDARY

Error name
ERR_CL_ICP2P_PROXYNODE_SECONDARY

Cause
This error occurs after the proxy node creation, import, or validation has been performed. The proxy origin node
block is a secondary block which is not supported by intercluster peer-to-peer communication proxy node
configuration.

Solution
Make the proxy origin node a primary node or delete the proxy origin node.

3.35.63 9374
The proxy node block has been corrected because the proxy origin node communication number has been
changed. Any reference to this proxy node block, child proxy tag block has to be reloaded.

852 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ICP2P_PROXYNODEEEC_CHD

Error name
ERR_CL_ICP2P_PROXYNODEEEC_CHD

Cause
This error occurs after the proxy node import or validation has been performed when proxy origin node
communication number has been changed.

Solution
None

3.35.64 9375
The proxy tag block has been corrected because the proxy origin tag communication number has been changed.
Any reference to this proxy tag block needs to be reloaded.

Error ID
ERR_CL_ICP2P_PROXYTAGEEC_CHD

Error name
ERR_CL_ICP2P_PROXYTAGEEC_CHD

Cause
This error occurs after the proxy tag import or validation has been performed when proxy origin tag
communication number has been changed.

Solution
None

3.35.65 9376
The proxy node block has been corrected because the information of the cluster name is missing.

Error ID
ERR_CL_ICP2P_CLUSTER_FIX

Error name
ERR_CL_ICP2P_CLUSTER_FIX

Cause
This error occurs after the proxy node import or validation has been performed when proxy node cluster name
information is missing.

Solution
None

853
3 ERROR CODES

3.35.66 9377
The proxy node block is corrected because the parent name information is missing.

Error ID
ERR_CL_ICP2P_PARENT_FIX

Error name
ERR_CL_ICP2P_PARENT_FIX

Cause
This error occurs after the proxy node import or validation has been performed when proxy node parent name
information is missing.

Solution
None

3.35.67 9378
The proxy tag block parent proxy node block communication and proxy origin node block has different a
communication number.

Error ID
ERR_CL_ICP2P_PROXYTAGEEC_MIXMATCH

Error name
ERR_CL_ICP2P_PROXYTAGEEC_MIXMATCH

Cause
This error occurs after the proxy tag creation, import, or validation has been performed. Its parent proxy node
block and proxy origin node block have different communication number.

Solution
Fix the proxy node communication number to be consistent with the proxy origin node.

3.35.68 9379
Parameter initialization option is not supported in this controller version.

Error ID
ERR_CL_PARAMINIT_NOTSUPPORTED

Error name
CL_PARAMINIT_NOTSUPPORTED

Cause
The PARAMINT option has been enabled and the PARAMINT option is not supported in release pre -R410.

854 www.honeywell.com
 3 ERROR CODES

Solution
Clear the PARAMINIT option and load again.

3.35.69 9380
The proxy tag block is not valid because the proxy origin tag block has been reassigned in the origin cluster and
the system cannot perform an update as the proxy tag is not checked out.

Error ID
ERR_CL_ICP2P_QVCS_PARENT_CHANGED

Error name
ERR_CL_ICP2P_QVCS_PARENT_CHANGED

Cause
This error occurs after the proxy tag validation has been performed when the proxy origin tag is reassigned and
is in check in state.

Solution
Check out the proxy tag and run the validation again.

3.35.70 9381
The proxy tag block is not valid because there is no data block configured on the proxy origin tag block in the
origin cluster. The system cannot perform an update as the proxy tag is not checked out.

Error ID
ERR_CL_ICP2P_QVCS_DATA_REMOVED

Error name
ERR_CL_ICP2P_QVCS_DATA_REMOVED

Cause
This error occurs after the Proxy Tag Validation has been performed when the proxy origin tag data block is
deleted.

Solution
Check out the proxy tag block and run the validation again.

3.35.71 9382
The proxy tag block is not valid because a data block has been added to the proxy origin tag block in the origin
cluster and the system cannot perform an update as the proxy tag is not checked out by the current user.

Error ID
ERR_CL_ICP2P_QVCS_DATA_NEW

Error name
ERR_CL_ICP2P_QVCS_DATA_NEW

855
3 ERROR CODES

Cause
The error occurs after the proxy tag validation has been performed when the proxy origin tag data block is
added.

Solution
Check out the proxy tag block and run the validation again.

3.35.72 9383
The proxy tag is not valid as the previous data block has to be deleted and a new data block has to be added to
the proxy tag block. Because, the same process has been followed for the proxy origin tag block in the origin
cluster. Also, the system cannot perform an update as the proxy tag is not checked out.

Error ID
ERR_CL_ICP2P_QVCS_DATA_CHANGED

Error name
ERR_CL_ICP2P_QVCS_DATA_CHANGED

Cause
This error occurs after the proxy tag validation has been performed when the proxy origin tag data block is
changed.

Solution
Check out the proxy tag and run the validation again.

3.35.73 9384
Reference has not been configured.

Error ID
ERR_CL_REF_NOTCONFIGURED

Error name
CL_REF_NOTCONFIGURED

Cause
A 'NULL MAP Reference' is detected when a 'Function Reference', 'Block Reference' and/or 'Parameter
Reference' of a Map block contained in a UCM is not configured. A 'NULL MAP Reference' has the status of
'INFO.'

Solution
A 'NULL MAP Reference' can be optionally fixed by entering a reference in the Map block configuration. If a
'NULL MAP Reference' is not fixed, a Control recipe that uses the reference is fixed unless the Master recipe
has been configured to avoid the NULL Reference.

3.35.74 9385
No reference to formula or report parameter.

856 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_UNREFERENCED_FORMULA_REPORT_PARAM

Error name
CL_UNREFERENCED_FORMULA_REPORT_PARAM

Cause
An 'Unreferenced Formula and Report Parameter' is detected during Recipe validation when a data or Phase
block has an enabled formula or report parameter value. The enabled formula or report parameter value is not
referenced by the recipe that contains the Phase block.
An 'Unreferenced Formula and Report Parameter' has the status of 'INFO.'

Attention
If 'Unreferenced Formula and Report Parameter' are not fixed, you may receive unused parameters.

Solution
Perform the following steps to avoid the error.
1. Disable the formula or report parameter.
2. Perform 'Default Configuration of Formula Value References.'
3. Perform 'Default Configuration of Master recipe Formula Parameter References.'
4. Perform 'Default Configuration of MR Report Parameter References.'
5. Create a step or transition expression that references the formula or report parameter.

3.35.75 9386
The equipment name does not match the data block type referenced by the EQUIPNAME parameter.

Error ID
ERR_CL_MISMATCH_EQUIPNAME

Error name
CL_MISMATCH_EQUIPNAME

Cause
A Phase block with mismatched EQUPNAME is detected during Master recipe validation when a contained
Phase block of the recipe is configured as follows:
1. EQUIPNAME parameter value references a Master recipe, RCM, SCM, or Proxy Master.
2. Recipe, proxy RCM, proxy SCM, and the data block of the referenced child do not match the Phase block
type of the contained Phase block.
3. If Phase block with mismatched EQUPNAME is not fixed, values that are stored or read to and from the
child blocks are not as expected.

Solution
Phase block with mismatched EQUIPNAME may be fixed by the following ways:
• Perform change parent of the Phase block contained by the recipe so the Phase block type matches the data
block type of the Master recipe, RCM, SCM, or Proxy Master recipe, Proxy RCM, Proxy SCM referenced
by its EQUIPNAME parameter.
• Perform change parent of the data block of the Master recipe, RCM, SCM, or Proxy Master recipe, Proxy
RCM, Proxy SCM referenced by the EQUIPNAME parameter to match the Phase block contained by the
Recipe. Changing the data block type of a Master recipe, RCM, SCM, or Proxy Master recipe, Proxy RCM,

857
3 ERROR CODES

Proxy SCM affects other objects. For this case, you must identify impacted objects and run validation run
against the objects.

3.35.76 9387
References Unit class.

Error ID
ERR_CL_UNITCLASS_REFERRED

Error name
CL_UNITCLASS_REFERRED

Cause
The Unit class or UCM referenced by a Master recipe is the Unit class or UCM that has been referenced as a
Unit class by the Unit selection configuration of the Master recipe. These are reported during Master recipe
validation with a status of 'INFO' so you can optionally perform validation of derivation children of the Unit
class.

Solution
Identify the unit instances derived from the Unit class and run the validation against these Unit instances.

3.35.77 9388
Unit configured belongs to Unit class and does not match the configured Unit class.

Error ID
ERR_CL_INVALIDUNIT_CONFIGURED

Error name
CL_INVALIDUNIT_CONFIGURED

Cause
The Unit configured does not match the configured Unit class.

Solution
Change the Unit configured such that both belong to the same type.

3.35.78 9389
Unit name already exists.

Error ID
ERR_CL_DUPLICATEUNITNAME_CONFIGURED

Error name
ERR_CL_DUPLICATEUNITNAME_CONFIGURED

858 www.honeywell.com
 3 ERROR CODES

Cause
The Unit name configured already exists.

Solution
Provide a unique Unit name that is not configured for the other units.

3.35.79 9390
Load validation has failed and the tag is not loaded to the controller.

Error ID
ERR_CL_LOADVALIDATIONFAIL

Error name
ERR_LOADVALIDATIONFAIL

Cause
Validation failed.

Solution
Check error log and correct the problem.

3.35.80 9391
The block type master cluster ID cannot be changed from zero to the cluster ID of a different cluster. Do not
change the master Cluster ID or change the cluster ID of the different cluster.

Error ID
ERR_CL_INVALID_MASTERSHIPID1

Error name
CL_INVALID_MASTERSHIPID1

Cause
Attempting to change mastership ID from 'none' to 'other' using PDE.

Solution
Do not change mastership ID or change it to 'self.'

3.35.81 9392
The block type cannot be changed when a different cluster is master cluster ID. Change the master cluster ID to
the cluster ID of the cluster or change the master cluster ID to zero and do a 'Save As.'

Error ID
ERR_CL_INVALID_MASTERSHIPID2

859
3 ERROR CODES

Error name
CL_INVALID_MASTERSHIPID2

Cause
Attempting to change block type while different cluster is master using PDE.

Solution
Change master cluster ID to 'self.' If you are changing it to 'none,' you can also do a 'Save As.'

3.35.82 9393
The parameter cannot be deleted because the block type master is either this cluster or a different cluster. Try
changing the master cluster ID to zero or doing a 'Save As.'

Error ID
ERR_CL_PARAMDEL_BT_MASTERSHIP

Error name
CL_PARAMDEL_BT_MASTERSHIP

Cause
Cannot delete parameters when block type mastership is 'self' or 'other.'

Solution
Change the block type mastership to 'none.' This only works if there are no instances of this block type. You can
also do a 'Save As.'

3.35.83 9394
The data type for parameter cannot be modified because the block type master is either this cluster or a different
cluster. Try changing the master cluster ID to zero or doing a 'Save As.'

Error ID
ERR_CL_PARAMDATATYPECHANGEMASTER

Error name
CL_PARAMDATATYPECHANGEMASTER

Cause
Cannot change the parameter data type when block type mastership is 'self' or 'other.'

Solution
Change the block type mastership to 'none.' This only works if there are no instances of this block type. You can
also do a 'Save As.'

3.35.84 9395
Minimum and Maximum enumerations value of public enumeration set are not found in database.

860 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_MIN_MAX_ENUMERATIONS

Error name
MIN_MAX_ENUMERATIONS

Cause
Existing public enumeration set has been modified.

Solution
Open the Phase type PDE and save it again.

3.35.85 9396
The Experion server peer responder feature is not licensed.

Error ID
ERR_CL_SCADALICENSEWARNING

Error name
ERR_CL_SCADALICENSEWARNING

Cause
Enough licenses are not available for the selected feature.

Solution
Upgrade the license for the particular feature.

3.35.86 9397
Failed to load the block as the Experion server peer responder feature is not licensed.

Error ID
ERR_CL_SCADAPOINT_NOTLICENSED

Error name
ERR_CL_SCADAPOINT_NOTLICENSED

Cause
Enough licenses are not available for the selected feature.

Solution
Upgrade the license for the particular feature for the load to succeed.

3.35.87 9398
Warm restart is not supported when activities are enabled.

861
3 ERROR CODES

Error ID
ERR_CL_NORESTARTFORACTIVITY

Error name
NORESTARTFORACTIVITY

Cause
Warm restart and activity feature cannot be used in a combination. Download option is prevented if both options
are enabled.

Solution
Set CEESTARTOPT to 'ALWAYSCOLD' or set ACTOPT to 'None.'

3.35.88 9406
Referenced Block is not found in the database.

Error ID
ERR_CL_BLK_REF_NOT_EXIST

Error name
BLK_REF_NOT_EXIST

Cause
Referenced Block does not exist in the database.

Solution
Re-import the function block along with corresponding block type with the Overwrites Existing option
checked in the Import dialog box.

3.35.89 9407
Type cannot be deleted as it is referenced in custom block(s).

Error ID
ERR_CL_CANTDELETE_REFERINBLKTYPE

Error name
CL_CANTDELETE_REFERINBLKTYPE

Cause
Deletion of user-defined template or custom block type is not allowed when it is referenced in a custom block
type.

Solution
Remove references of user-defined template or custom block type and then try deleting it.

862 www.honeywell.com
 3 ERROR CODES

3.35.90 9408
Type cannot be renamed as it is referenced in custom block(s).

Error ID
ERR_CL_CANTRENAME_REFERINBLKTYPE

Error name
CL_CANTRENAME_REFERINBLKTYPE

Cause
Renaming of user-defined template or custom block type is not allowed when it is referenced in a custom block
type.

Solution
Remove references of user-defined template or custom block type, and then try renaming it.

3.35.91 9421
The proxy FTEB block is not valid since the proxy origin FTEB does not exist in the origin cluster.

Error ID
ERR_CL_ICP2P_PROXYORIGIN_FTEB_NOTEXIST

Error name
ERR_CL_ICP2P_PROXYORIGIN_FTEB_NOTEXIST

Cause
This error occurs after the proxy FTEB creation, import or validation has been performed when the proxy origin
FTEB name does not exist in the origin cluster.

Solution
Change to a valid proxy origin FTEB name.

3.35.92 9422
The proxy FTEB block is not valid because the proxy origin FTEB is a secondary block.

Error ID
ERR_CL_ICP2P_PROXYFTEB_SECONDARY

Error name
ERR_CL_ICP2P_PROXYFTEB_SECONDARY

Cause
This error occurs after the proxy FTEB creation, import, or Validation has been performed. The Proxy origin
FTEB block is a secondary block which is not supported by intercluster peer-to-peer communication proxy
FTEB configuration.

863
3 ERROR CODES

Solution
Enter a primary proxy origin FTEB name or delete the proxy FTEB block.

3.35.93 9423
The proxy FTEB block is not valid because the proxy origin FTEB communication Path is blank.

Error ID
ERR_CL_ICP2P_FTEB_COMMPATH_INVALID

Error name
ERR_CL_ICP2P_FTEB_COMMPATH_INVALID

Cause
This error occurs after the proxy FTEB creation, import, or validation has been performed. The proxy origin
FTEB block communication path is blank.

Solution
Fix the proxy origin FTEB block IP address or device index or module slot number, and reconfigure, import or
validate the proxy FTEB.

3.35.94 9424
The proxy FTEB block has been corrected because the cluster name information is missing.

Error ID
ERR_CL_ICP2P_FTEB_CLUSTER_FIX

Error name
ERR_CL_ICP2P_FTEB_CLUSTER_FIX

Cause
This error occurs after the proxy FTEB import or validation has been performed when proxy FTEB cluster
name information is missing.

Solution
None

3.35.95 9425
The proxy FTEB block has been corrected because the Parent Name information is missing.

Error ID
ERR_CL_ICP2P_FTEB_PARENT_FIX

Error name
ERR_CL_ICP2P_FTEB_PARENT_FIX

864 www.honeywell.com
 3 ERROR CODES

Cause
This error occurs after the proxy FTEB, import , or validation has been performed when proxy FTEB parent
name information is missing.

Solution
None

3.35.96 9426
The proxy FTEB block has been corrected because the configuration of the proxy origin FTEB block has been
changed in the origin cluster. The proxy node which represents the proxy origin node C200E responder must be
validated again.

Error ID
ERR_CL_ICP2P_FTEB_CONFIG_CHD

Error name
ERR_CL_ICP2P_FTEB_CONFIG_CHD

Cause
This error occurs after the proxy FTEB creation, import, or validation has been performed. The configuration
Information of the proxy origin FTEB block is changed in the origin cluster. The proxy node which represents
the proxy origin node C200E responder must be validated again.

Solution
None

3.35.97 9427
The proxy FTEB block is not valid because the proxy origin block is not of FTEB block type.

Error ID
ERR_CL_ICP2P_FTEBTYPE_INVALID

Error name
ERR_CL_ICP2P_FTEBTYPE_INVALID

Cause
This error occurs after the proxy FTEB creation, import or validation has been performed. The proxy origin
block is not a FTEB block.

Solution
Select an FTEB block as the proxy origin block or delete the proxy FTEB block.

3.35.98 9428
Possible loss of configuration data.

865
3 ERROR CODES

Error ID
ERR_CL_POSSBLE_CONFIG_LOSS

Error name
ERR_CL_POSSBLE_CONFIG_LOSS

Cause
Database is in R410 or newer release, and controller is in R400 or older release.

Solution
Needs reconfiguration when the strategy needs to be loaded to R410 or newer controller with HART7
functionality in PM/Series C HART AI/AO.

3.35.99 9429
The value is not valid because a Unit does not exist at the index specified.

Error ID
ERR_CL_INVALIDUNITPASSING

Error name
ERR_CL_INVALIDUNITPASSING

Cause
UNITPASS[x] cannot be used in configuration until a Unit exists at that index.

Solution
Configure the Unit, UNITCLASS[x], or chose another index of UNITPASS[x] which has a Unit already
configured.

3.35.100 9430
Public enumeration set name already exists in database.

Error ID
ERR_CL_DUPLICATE_PUBLICENUM_NAME

Error name
DUPLICATE_ENUMSET_NAME

Cause
Public enumeration set that is being imported already exists in the database.

Solution
Delete or rename the existing public enumeration set and import it again.

866 www.honeywell.com
 3 ERROR CODES

3.35.101 9441
Public name is Empty.

Error ID
ERR_CL_EMPTYPUBLICNAME

Error name
CL_EMPTYPUBLICNAME

Cause
Public name parameter value is empty or track name of the public name is set to FALSE.

Solution
• Set the track name to public name to true.
• Set the public name value.

3.35.102 9442
Invalid connection. Parameter references an index that is not configured.

Error ID
ERR_CL_BAD_PARAM_INDEX

Error name
CL_BAD_PARAM_INDEX

Cause
A connection is configured to a parameter with an invalid index number.

Solution
Configure the connection to a parameter with the valid index number.

3.35.103 9443
The proxy tag update is successful.

Error ID
ERR_CL_ICP2P_PROXYBLOCKUPDATE_SUCCESS

Error name
ERR_CL_ICP2P_PROXYBLOCKUPDATE_SUCCESS

Cause
This is the message that is displayed if the proxy tag update is successful.

867
3 ERROR CODES

Solution
None

3.35.104 9452
The HART device name is configured as analog input/analog output.

Error ID
ERR_HART_DEVTYPECHANGEINFO

Error name
HART_DEVTYPECHANGEINFO

Cause
Overwriting an HART device with a different device type.

Solution
Delete the template and all its related configurations and then re import the device.

868 www.honeywell.com
 3 ERROR CODES

3.36 Codes 9471 to 9523

Related topics
“9471” on page 869
“9472” on page 870
“9481” on page 870
“9482” on page 870
“9483” on page 871
“9484” on page 871
“9485” on page 871
“9486” on page 872
“9487” on page 872
“9488” on page 873
“9489” on page 873
“9490” on page 873
“9491” on page 874
“9492” on page 874
“9493” on page 874
“9494” on page 875
“9495” on page 875
“9496” on page 876
“9497” on page 876
“9498” on page 876
“9522” on page 877
“9523” on page 877

3.36.1 9471
The configuration assembly data size in the adapter exceeds the maximum size of the configuration assembly
data allowed by the assembly connections. The I/O module cannot be associated with the adapter.

Error ID
ERR_CL_IOM_CFGASSEMBLY_NOTSUPPORTED

Error name
CL_IOM_CFGASSEMBLY_NOTSUPPORTED

Cause
The adapter does not support the configuration assembly of the I/O module, if the sum of (A+B) is greater than
the MAXCONFIGSIZE supported by the adapter.
Where A = The Configuration Assembly size of the adapter block.
and B = The total size of Configuration Assembly size of the IOM blocks currently assigned to adapter.

Solution
Perform one of the following as a workaround.
• On the adapter block, clear the option Consolidate Connections parameter, save the configuration, and
then assign the IOM to the adapter.

869
3 ERROR CODES

• Remove some of the I/O modules and then assign the current I/O module.

3.36.2 9472
The Consolidate Connections option cannot be enabled because the configuration assembly data size has
exceeded the maximum size supported in the block.

Error ID
ERR_CL_CFGASSEMBLYDATASIZE_EXCEEDS_MAXCFGSIZE

Error name
CL_CFGASSEMBLYDATASIZE_EXCEEDS_MAXCFGSIZE

Cause
The sum total of the size of Configuration Assembly of each of the I/O Module (IOM) blocks currently assigned
to the adapter is greater than the MAXCONFIGSIZE supported by the adapter.

Solution
Remove some of the IOM blocks and enable the Consolidate Connections parameter on the adapter block.

3.36.3 9481
Cannot unassign or delete the Ethernet Adapter block when it has associated IO modules.

Error ID
ERR_CL_CANNOT_UNASSIGN_EIPADAPTER_WITH_IOM_ASSOC

Error name
CL_CANNOT_UNASSIGN_EIPADAPTER_WITH_IOM_ASSOC

Cause
Removal or deletion of Ethernet/IP adapters are not allowed when one or more I/O modules are associated with
the Ethernet/IP adapters.

Solution
Remove or delete the I/O modules associated with the Ethernet/IP adapters and then try deleting the Ethernet/IP
adapters.

3.36.4 9482
X IO modules can be assigned to Y, which has a chassis size equal to Z.
The number of IO modules that you can assign to the EtherNet/IP adapter must be less than or equal to the
defined chassis size.
X denotes the number of I/O modules, Y denotes the name of the block, and Z denotes the defined chassis size.

Error ID
ERR_CL_CANNOT_ASSIGN_EIPIOM_WITH_EIPADAPTER

870 www.honeywell.com
 3 ERROR CODES

Error name
CL_CANNOT_ASSIGN_EIPIOM_WITH_EIPADAPTER

Cause
The Ethernet/IP I/O modules are more than the defined chassis size. Therefore, the I/O modules cannot be
assigned to the Ethernet/IP adapter.

Solution
Remove or delete the associated I/O modules and then try to assign the other I/O modules.

3.36.5 9483
The block has an invalid IP address.

Error ID
ERR_CL_INVALID_IPADDRESS

Error name
CL_INVALID_IPADDRESS

Cause
The IP address entered is invalid.

Solution
Enter a valid IP address.

3.36.6 9484
Parameter value cannot be set because the number of IO modules associated with the Adapter is greater than the
new value.

Error ID
ERR_CL_CHASSISSIZE

Error name
CL_CHASSISSIZE

Cause
If you set the Chassis size value to be lesser than the number of IO modules that have been assigned to the
adapter.

Solution
Unassign or delete the I/O modules associated to the Ethernet/IP adapter or assign a bigger value to the Chassis
size.

3.36.7 9485
The number of IO Modules assigned is more than chassis size.

871
3 ERROR CODES

Error ID
ERR_CL_INVALID_CHASSISSIZE

Error name
CL_INVALID_CHASSISSIZE

Cause
The number of assigned IO Modules is more than the chassis size.

Solution
Enter the correct value for chassis size, which includes all the modules in the chassis.

3.36.8 9486
The block has an invalid slot number.

Error ID
ERR_CL_INVALID_SLOT

Error name
CL_INVALID_SLOT

Cause
The value of the parameter IOM slot number in the chassis is 0.

Solution
Enter a valid value for the parameter IOM slot number in the chassis.

3.36.9 9487
The network configuration information specified in block X is a duplicate of the network configuration
information specified in the Y block.
where X and Y denote block types.

Error ID
ERR_CL_DUPLICATE_CONNINFO

Error name
CL_DUPLICATE_CONNINFO

Cause
The specified IP address or slot number is already in use. One gateway module is allowed to represent the
ControlLogix PLC.

Solution
Enter a new valid IP address or slot number.

872 www.honeywell.com
 3 ERROR CODES

3.36.10 9488
Control Logix Block cannot be deleted as it is referenced by one or more Control Logix UDTs

Error ID
ERR_CL_CLXGATEWAY_DEL_WHILEREFERENCEEXIST

Error name
CL_CLXGATEWAY_DEL_WHILEREFERENCEEXIST

Cause
The ControlLogix Block cannot be deleted when one or more ControlLogix UDT block types refer it.

Solution
Delete all references from the ControlLogix UDT block type.

3.36.11 9489
The network configuration information in the Control Logix block cannot be updated because it is referenced by
one or more loaded strategies.

Error ID
ERR_CL_UPDATE_CONNINFO_WHILEREFERENCELOADED

Error name
CL_UPDATE_CONNINFO_WHILEREFERENCELOADED

Cause
The IP Address or slot information in a block cannot be updated when one or more Control Logix UDT blocks
which has referenced to it are loaded.

Solution
Delete all the loaded references and update the connection information in the ControlLogix module.

3.36.12 9490
Block X has invalid network configuration information or does not refer to any Control Logix block.
Where X denotes the name of the block.

Error ID
ERR_CL_INVALID_CONNINFO

Error name
CL_INVALID_CONNINFO

873
3 ERROR CODES

Cause
IP Address or slot in the ControlLogix UDT gets updated with the network configuration of the ControlLogix
Gateway. The ControlLogix UDT does not refer to any ControlLogix Gateway or the ControlLogix Gateway
has invalid network configuration information.

Solution
Enter a valid IP Address and slot in the network configuration information, in the referred ControlLogix
Gateway or refer a different ControlLogix Gateway block.

3.36.13 9491
The Control Logix block cannot be renamed because at least one loaded strategy might be affected by the
operation.

Error ID
ERR_CL_RENAME_WHILEREFERENCELOADED

Error name
CL_RENAME_WHILEREFERENCELOADED

Cause
The Control Logix block cannot be renamed because it has been referenced by one or more loaded strategies.

Solution
Remove the loaded strategy which has a reference to the ControlLogix Gateway from monitoring and then
rename the Control Logix block.

3.36.14 9492
Load of the controller X failed due to firmware mismatch. Controller with IP on downlink feature cannot be
loaded because the firmware does not support the feature.

Error ID
ERR_CL_FIRMWARE_IPONDOWNLINK

Error name
CL_FIRMWARE_IPONDOWNLINK

Cause
Firmware of the controller does not support the connecting IP on the downlink port.

Solution
Flash the controller with the firmware that supports IP on downlink feature and then load the controller.

3.36.15 9493
Load of controller failed due to firmware mismatch. Controller without IP on downlink feature cannot be loaded
to the firmware that supports IP on downlink feature.”

874 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FIRMWARE_NO_IPONDOWNLINK

Error name
CL_FIRMWARE_NO_IPONDOWNLINK

Cause
Firmware of the controller supports IP on downlink port, but the C300 block being loaded does not have the
same details configured.

Solution
Flash the controller with the firmware that does not support IP on downlink feature and then load the controller.

3.36.16 9494
Loading block X failed because the controller does not support the Ethernet/IP protocol.
Where X denotes the name of the block.

Error ID
ERR_CL_PCM_EIPNOTSUPPORTED

Error name
CL_PCM_EIPNOTSUPPORTED

Cause
The controller does not support the Ethernet/IP protocol.

Solution
Select a controller that supports the Ethernet/IP protocol and then reload it.

3.36.17 9495
The adapter or one of the IO modules assigned to it is in active state. The adapter and all the IO Modules
assigned to it must be in an inactive state before reloading the adapter.
On the adapter block, the Consolidate Connections box is selected. One or more of the IO modules assigned to
this adapter are still active while trying to reload the adapter. This is not allowed.

Error ID
ERR_CL_EIPADAPTER_RELOAD

Error name
CL_EIPADAPTER_RELOAD

Cause
This error message is displayed when you use the consolidated connections feature and also attempt to reload
the adapter when one or more IOMs under this adapter are active.

875
3 ERROR CODES

Solution
Inactivate all the IOMs, and then inactivate the adapter before reloading.

3.36.18 9496
The chassis size of the adapter is invalid. IOM's are loaded with slot numbers that are greater than the chassis
size.

Error ID
ERR_CL_EIPADAPTER_CANNOT_MODIFY

Error name
CL_EIPADAPTER_CANNOT_MODIFY

Cause
The IOMs are loaded with slot numbers greater than the changing chassis size.

Solution
Delete the IOMs loaded with a greater slot number, change the chassis size, and then reload the adapter.

3.36.19 9497
The IP address and/or Slot specified is already in use by another device. Please see the error log for details.

Error ID
ERR_CL_DUPLICATE_IPADDRESS

Error name
CL_DUPLICATE_IPADDRESS

Cause
This error appears when the IP Address or a combination of the IP Address and the Slot(if applicable) specified
for a device is the duplicate of another device, which is already configured in the ERDB.

Solution
Enter an IP address and a slot that is unique in the network and does not conflict with any of the configured
devices in the ERDB.

3.36.20 9498
Cannot delete the standard EIP template from the library

Error ID
ERR_CL_EIP_STDTEMP_DELETE

Error name
CL_EIP_STDTEMP_DELETE

876 www.honeywell.com
 3 ERROR CODES

Cause
User tried to delete the standard EIP template from the library. For example, EIP drives, PF255,193DNEN_E3,
193DNEN_E3P.

3.36.21 9522
BlockExt Interface is not implemented for the module.

Error ID
ERR_CL_BLOCKEXT_INTERFACENOTIMPL

Error name
CL_BLOCKEXT_INTERFACENOTIMPL

Cause
The block extension hook is not implemented for the module.

Solution
Implement the block extension hook.

3.36.22 9523
The block X has a duplicate slot number Y.
Where X denotes the name of the block and Y the slot number.

Error ID
ERR_CL_EIP_DUPLICATE_SLOT

Error name
CL_EIP_DUPLICATE_SLOT

Cause
The cause for this error can be attempting to assign IOM a slot number which is already used.

Solution
Assign a unique slot number to the IOM.

877
3 ERROR CODES

3.37 Codes 9501 to 9521

Related topics
“9501” on page 878
“9502” on page 878
“9503” on page 879
“9504” on page 879
“9505” on page 879
“9506” on page 880
“9507” on page 880
“9508” on page 880
“9521” on page 881

3.37.1 9501
Duplicate HPM node number on same UCN network.

Error ID
ERR_CL_DUPLICATE_HPMNODENO

Error name
CL_DUPLICATE_HPMNODENO

Cause
The configured HPM node number already exists on the same UCN network.

Solution
Configure HPM node with a different number other than the one already configured on the same UCN network.

3.37.2 9502
HPM node number for non-redundant or primary block must be an odd number.

Error ID
ERR_CL_HPMNODENO_NOT_ODD

Error name
CL_HPMNODENO_NOT_ODD

Cause
HPM node number for Primary or non-redundant block must be an odd number.

Solution
Assign an odd node number for Primary or non-redundant block.

878 www.honeywell.com
 3 ERROR CODES

3.37.3 9503
The node number of NIM is 1 and cannot be used for HPM node number.

Error ID
ERR_CL_HPMNODENO_NOT_ONE

Error name
CL_HPMNODENO_NOT_ONE

Cause
The node number of NIM is 1. Hence, the HPM node number cannot be assigned as 1.

Solution
Assign the HPM node number any odd value other than 1.

3.37.4 9504
HPM node number is out of range. The HPM node number range is 3 to 64. Assign odd numbers for primary
and even numbers for secondary.

Error ID
ERR_CL_HPMNODENO_NOT_INRANGE

Error name
CL_HPMNODENO_NOT_INRANGE

Cause
HPM node number is out of range.

Solution
Assign the HPM node number in the range of 3 to 64 (odd for primary and even for secondary).

3.37.5 9505
UCN network number is out of range. The range for is UCN network number 1 to 20.

Error ID
ERR_CL_UCNNWNO_NOT_INRANGE

Error name
CL_UCNNWNO_NOT_INRANGE

Cause
UCN network number is out of range.

879
3 ERROR CODES

Solution
Assign UCN network number in the range of 1 to 20.

3.37.6 9506
Value of Cache Age is out of range. The range for Cache Age is 1 to 100.

Error ID
ERR_CL_CACHEAGE_NOT_INRANGE

Error name
CL_CACHEAGE_NOT_INRANGE

Cause
Value of CACHEAGE parameter is out of range.

Solution
Assign the CACHEAGE value in the range of 1 to 100.

3.37.7 9507
Value of Subscription Fresh Factor is out of range. The range for Subscription Fresh Factor is 1 to 100.

Error ID
ERR_CL_SUBSCPTNFRSHFCTR_NOT_INRANGE

Error name
CL_SUBSCPTNFRSHFCTR_NOT_INRANGE

Cause
Value of SUBSCPTNFRSHFCTR parameter is out of range.

Solution
Assign SUBSCPTNFRSHFCTR value in the range of 1 to 100.

3.37.8 9508
Cannot modify HPM Node number or UCN network number if points are already imported. Need to delete
EHPM with points and then configure and import the points again.

Error ID
ERR_CL_ConfigurationChange_NOT_Allowed

Error name
CL_ConfigurationChange_NOT_Allowed

Cause
You cannot make configuration changes to the EHPM points that are imported to the EHPM controller.

880 www.honeywell.com
 3 ERROR CODES

Solution
Delete the EHPM controller with points. Configure the EHPM points and then import the points to the EHPM
controller.

3.37.9 9521
Cannot delete the HART template since some strategies are associated with the HART template.

Error ID
ERR_CL_HART_TMPLT_HAS_CHILDREN

Error name
CL_HART_TMPLT_HAS_CHILDREN

Cause
Deleting the HART device template, which is configured as an associated template in an IO channel.

Solution
Delete the required HART AI/AO channels and, then delete the template.

881
3 ERROR CODES

3.38 Codes 9525 to 9550

Related topics
“9525” on page 882
“9526” on page 882
“9527” on page 883
“9528” on page 883
“9529” on page 883
“9530” on page 884
“9531” on page 884
“9532” on page 884
“9533” on page 885
“9534” on page 885
“9535” on page 885
“9536” on page 886
“9537” on page 886
“9538” on page 886
“9539” on page 887
“9540” on page 887

3.38.1 9525
Logical highway number range is between 1 and 20.

Error ID
ERR_CL_LOGICAL_HIWAYNUM_RANGE

Error name
CL_LOGICAL_HIWAYNUM_RANGE

Cause
Configured logical highway number is not in the specified range.

Solution
Modify the logical highway number.

3.38.2 9526
Cannot change defining EHB that is already loaded to be a non-defining EHB.

Error ID
ERR_CL_EHB_LOGICAL_HIWAYNUM_LOADED

Error name
CL_EHB_LOGICAL_HIWAYNUM_LOADED

882 www.honeywell.com
 3 ERROR CODES

Cause
Trying to modify the logical Hiway number that is already loaded.

Solution
Assign the logical Hiway number that is not loaded.

3.38.3 9527
Duplicate logical Hiway number is detected in EHB.

Error ID
ERR_CL_DUPLICATED_LOGICAL_HIWAYNUM

Error name
CL_DUPLICATED_LOGICAL_HIWAYNUM

Cause
Configured logical Hiway number is duplicated.

Solution
Modify the logical Hiway number.

3.38.4 9528
Duplicate partner logical Hiway number is detected in EHB.

Error ID
ERR_CL_DUPLICATED_PARTNER_LOGICAL_HIWAYNUM

Error name
CL_DUPLICATED_PARTNER_LOGICAL_HIWAYNUM

Cause
Configured partner logical Hiway number is duplicated.

Solution
Modify the partner logical Hiway number.

3.38.5 9529
An EHB having the same logical and partner logical Hiway number was detected.

Error ID
ERR_CL_DUPLICATED_LOGICAL_AND_PARTNER_HIWAYNUM

Error name
CL_DUPLICATED_LOGICAL_AND_PARTNER_HIWAYNUM

883
3 ERROR CODES

Cause
Configured logical Hiway number and partner logical Hiway number are the same.

Solution
Modify the logical Hiway number or partner logical Hiway number.

3.38.6 9530
An EHB having a matching partner logical Hiway number does not exist.

Error ID
ERR_CL_PARTNER_EHB_NOT_FOUND

Error name
CL_PARTNER_EHB_NOT_FOUND

Cause
Trying to load the EHB with partner logical number, but the partner EHB not found.

Solution
Create the partner EHB and then reload the EHB.

3.38.7 9531
The non defining EHB is not allowed to change the partner Hiway number.

Error ID
ERR_CL_CHANGE_PARTNER_EHB_PARTNER_HIWAYNUM

Error name
CL_CHANGE_PARTNER_EHB_PARTNER_HIWAYNUM

Cause
Try to modify the partner Hiway number of the EHB.

Solution
Do not modify the partner Hiway number.

3.38.8 9532
Not allow to break the EHB pair by changing the partner Hiway number that is already loaded.

Error ID
ERR_CL_EHB_HIWAYNUM_LOADED

Error name
CL_EHB_HIWAYNUM_LOADED

884 www.honeywell.com
 3 ERROR CODES

Cause
Try to break the EHB partner that is already loaded.

Solution
Do not break the EHB partner.

3.38.9 9533
The defining EHB configured in CEE needs to be loaded before loading the associated CEE.

Error ID
ERR_CL_EHB_NOT_LOADED

Error name
CL_EHB_NOT_LOADED

Cause
Trying to load CEE without loading the EHB to which the CEE communicates.

Solution
Load the EHB first and then load the associated CEE.

3.38.10 9534
Defining EHB modified and reloaded but non-defining EHB is not reloaded.

Error ID
ERR_CL_EHB_PAIR_NOT_MATCH

Error name
CL_EHB_PAIR_NOT_MATCH

Cause
The data in EHB pair does not match.

Solution
Re-configure the EHB pair.

3.38.11 9535
The configured Hiway number needs to be referenced in the defining EHB.

Error ID
ERR_CL_NOT_DEFINING_EHB

Error name
CL_NOT_DEFINING_EHB

885
3 ERROR CODES

Cause
The configured Hiway number is not referenced in the defining EHB.

Solution
Modify the Hiway number reference in the defining EHB.

3.38.12 9536
The logical Hiway number cannot be changed as the loaded Hiway is already used in HRB.

Error ID
ERR_CL_LOGICAL_HIWAYNUM_INUSE

Error name
CL_LOGICAL_HIWAYNUM_INUSE

Cause
The logical Hiway number is used in one of the HRBs.

Solution
Delete HRBs (that use the loaded Hiway number) of the CEEs from the Monitoring view.

3.38.13 9537
The remote IP of EHB cannot be changed. The loaded remote IP is already used in the HRBs.

Error ID
ERR_CL_EHB_REMOTEIP_INUSE

Error name
CL_EHB_REMOTEIP_INUSE

Cause
The EHB remote IP is used in the HRBs.

Solution
Delete the HRBs (that use the EHB remote IP) of the CEEs from Monitoring view.

3.38.14 9538
The box address of HRB is duplicated in the CEEs of the EHB pair.

Error ID
ERR_CL_DUPLICATED_BOX_ADDRESS

Error name
CL_DUPLICATED_BOX_ADDRESS

886 www.honeywell.com
 3 ERROR CODES

Cause
The box address of HRB is duplicated in the CEEs of the EHB pair.

Solution
Modify the box address of the HRB and the reload the Box CM.

3.38.15 9539
The logical Hiway number of this HRB does not match with the loaded CEE.

Error ID
ERR_CL_CEE_LOGICAL_HIWAYNUM_NOT_MATCH

Error name
CL_CEE_LOGICAL_HIWAYNUM_NOT_MATCH

Cause
Ensure that the logical Hiway number in the HRB should be same as logical Hiway number in CEE.

Solution
Ensure that the logical Hiway number is loaded to the CEE and then try to load the HRB.

3.38.16 9540
The EHB remote IP of this HRB s does not match with the loaded CEE.

Error ID
ERR_CL_CEE_REMOTE_IP_NOT_MATCH

Error name
CL_CEE_REMOTE_IP_NOT_MATCH

Cause
Ensure that the remote IP in the HRB must be same as remote IP in CEE.

Solution
Ensure that the EHB remote IP is loaded to the CEE and then try to load the HRB again.

887
3 ERROR CODES

3.39 Codes 10001 to 10093

Related topics
“10001” on page 889
“10002” on page 890
“10003” on page 890
“10004” on page 891
“10005” on page 891
“10006” on page 892
“10007” on page 892
“10008” on page 892
“10009” on page 893
“10010” on page 893
“10011” on page 894
“10012” on page 894
“10013” on page 894
“10014” on page 895
“10015” on page 895
“10016” on page 896
“10017” on page 896
“10018” on page 896
“10019” on page 897
“10020” on page 897
“10021” on page 897
“10022” on page 898
“10023” on page 898
“10024” on page 898
“10025” on page 899
“10026” on page 899
“10027” on page 900
“10028” on page 900
“10029” on page 900
“10032” on page 901
“10033” on page 901
“10034” on page 901
“10035” on page 902
“10036” on page 902
“10037” on page 902
“10038” on page 903
“10039” on page 903
“10040” on page 903
“10041” on page 904
“10042” on page 904
“10043” on page 904
“10044” on page 905
“10045” on page 905
“10046” on page 905

888 www.honeywell.com
 3 ERROR CODES

“10047” on page 906

“10048” on page 906
“10049” on page 906
“10050” on page 907
“10051” on page 907
“10052” on page 907
“10053” on page 908
“10054” on page 908
“10055” on page 908
“10056” on page 909
“10057” on page 909
“10058” on page 909
“10059” on page 910
“10060” on page 910
“10061” on page 910
“10062” on page 911
“10063” on page 911
“10064” on page 911
“10065” on page 912
“10066” on page 912
“10070” on page 912
“10071” on page 913
“10072” on page 913
“10073” on page 913
“10074” on page 914
“10075” on page 914
“10076” on page 914
“10077” on page 915
“10078” on page 915
“10079” on page 915
“10080” on page 916
“10081” on page 916
“10082” on page 916
“10083” on page 917
“10084” on page 917
“10085” on page 917
“10086” on page 918
“10087” on page 918
“10088” on page 918
“10089” on page 919
“10090” on page 919
“10091” on page 920
“10092” on page 920
“10093” on page 920

3.39.1 10001
The specified interface is not supported.

889
3 ERROR CODES

Error ID
ERR_CL_INTERFACE_NOT_SUPPORTED

Error name
CL_INTFCNOTSUPP

Cause
1. Control Builder attempted to call an unsupported interface, generally indicating a mismatch between Control
Builder components. This may be caused by components present from different releases.
2. When attempted to load a backup which generally leads to incorrect attempts to correct the situation.

Solution
1. Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.
2. The recovery operation involves:
• Load the secondary RM from monitoring.
• Command the secondary RM to become the primary.
• Repeat the load operation.

3.39.2 10002
Illegal operation on object in construction.

Error ID
ERR_CL_IN_CONSTRUCTION

Error name
CL_INCONSTRUCT

Cause
An operation was attempted on a new function block or template that is illegal in the current context.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components or a
software bug.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.3 10003
This object has been marked for deletion.

Error ID
ERR_CL_IN_DELETION

890 www.honeywell.com
 3 ERROR CODES

Error name
CL_INDELETION

Cause
An operation was attempted on a block that had been marked for deletion but has not been physically removed
from the ERDB yet, as the transaction has not completed.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components or a
software bug.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.4 10004
Operation is not legal for an Embedded object.

Error ID
ERR_CL_EMB_OBJ

Error name
CL_EMBOBJ

Cause
Attempt to specialize a template which is embedded.

Solution
Should not see this error in release 1 - template specialize is not implemented yet.

3.39.5 10005
The transaction ID specified is not valid.

Error ID
ERR_CL_BAD_TRANSACTION

Error name
CL_BADTRANSACT

Cause
A method was called with a transaction ID that is not currently active in this control session.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components or a
software bug.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

891
3 ERROR CODES

3.39.6 10006
An Unexpected error was encountered.

Error ID
ERR_CL_UNEXPECTED

Error name
CL_UNEXPECTED

Cause
A catch-all for any error not otherwise identifiable. Mostly this means an exception was thrown by the operating
system such as trying to use a bad pointer. In Release 1 there is no mechanism in error handling to report the
underlying cause. Some methods may return this error if an out of memory condition is encountered, although
the CL_OUTOFMEMORY error is usually returned in this case.

Solution
This normally should not happen and indicates either bad data passed by the interface caller, a bug in the
Control Library, or possibly an out of memory condition.

3.39.7 10007
A lock contention was encountered.

Error ID
ERR_CL_LOCK

Error name
CL_LOCK

Cause
Most likely a previous Control Builder session terminated abnormally and left some blocks locked. in a multi-
user environment, this could result from two users trying to access the same block.

Solution
Close Control Builder and use DbAdmin to clear the locks.

3.39.8 10008
A problem was encountered while unlocking.

Error ID
ERR_CL_UNLOCK

Error name
CL_UNLOCK

892 www.honeywell.com
 3 ERROR CODES

Cause
Caused by releasing an exclusive lock on existing share lock within the same transaction or attempting to
release a lock locked by a different transaction.

Solution
Should not happen under normal circumstances and could be due to bad data in the database ACTVE_LOCK
table. In this case, the table entry could be cleared by closing Control Builder and using DbAdmin to clear the
lock table.

3.39.9 10009
Object must be locked for this operation.

Error ID
ERR_CL_NOT_LOCKED

Error name
CL_NOTLOCKED

Cause
An attempt was made to perform an operation on an object, such as updating a function block parameter value,
with no lock on the item by the current transaction, or no active transaction.

Solution
Should not happen under normal circumstances. Could be due to bad or missing data in the database
ACTIVE_LOCK table - See discussion above for error code 10008.

3.39.10 10010
Block <name> is not composite: This operation requires a composite object.

Error ID
ERR_CL_NOT_COMPOSITE

Error name
CL_NOTCOMPOSITE

Cause
Tried to perform an operation on a basic block that requires a composite block such as a CM or SCM, such as
trying to embed a basic block within another basic block.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components or a
software bug.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

893
3 ERROR CODES

3.39.11 10011
Operation is invalid - no common view.

Error ID
ERR_CL_NO_MATCHING_VIEW

Error name
CL_NOMATCHVIEW

Cause
An operation that requires a view, such as creating an embedded child failed, because the specified view did not
exist.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.12 10012
Operation is invalid - bad View specified.

Error ID
ERR_CL_BAD_VIEW

Error name
CL_BADVIEW

Cause
An operation that requires a view, such as creating an embedded child failed, because the specified view did not
exist.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.13 10013
The view for block <name> is not defined in the composition parent.

Error ID
ERR_CL_VIEW_NOT_IN_PARENT

894 www.honeywell.com
 3 ERROR CODES

Error name
CL_VWNOTINPARENT

Cause
An attempt to add a child function block to a view failed because the view was not in the block's parent.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.14 10014
The view for block <name> is not defined in the composition child.

Error ID
ERR_CL_VIEW_NOT_IN_CHILD

Error name
CL_VWNOTINCHLD

Cause
An attempt to add a child function block to a view failed because the view was in the parent but not in the child.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.15 10015
The control is already a child in this view.

Error ID
ERR_CL_CHILD_ALREADY_IN_VIEW

Error name
CL_CHLDALRDYINVW

Cause
An attempt to add a child function block to a view failed because the child was already assigned to the view.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.

895
3 ERROR CODES

Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.39.16 10016
This operation is not valid for an embedded Control.

Error ID
ERR_CL_EMBEDDED

Error name
CL_EMBEDDED

Cause
The CreateEmbeddedChild() interface method tried to directly instantiate and/or specialize from an embedded
Template at the interface level.

Solution
Should not happen, as specializing or embedding a template is not implemented in the current Experion PKS
releases.

3.39.17 10017
This operation is not valid at this level for a parent-defined element or its dependent element.

Error ID
ERR_CL_TEMPLATE_DEFINED

Error name
CL_TEMPLDEFD

Cause
For an instance of User Defined Template, an attempt is made to rename the function blocks, remove the
connections, or edit the parameters that are template-defined or its dependent parameters.

Solution
Ensure that template defined elements or its dependent parameters are not edited in instance.

3.39.18 10018
Operation is invalid as element is not a template.

Error ID
ERR_CL_NOT_TEMPLATE

Error name
CL_NOTTEMPL

896 www.honeywell.com
 3 ERROR CODES

Cause
An attempt was made to set a value as template-defined for an object that is not a template.

Solution
Should never happen. Template designed attributes are not implemented in current Experion PKS releases.
Returned by the SetTemplateDefAttr() method which should never be used in early releases (and should
probably return CL_INTFCNOTSUPP).

3.39.19 10019
Operation is invalid as element is not a CPM.

Error ID
ERR_CL_NOT_CPM

Error name
CL_NOTCPM

Cause
An operation was attempted that can only be done on a CPM block, such as trying to create a CEE block within
a non-CPM block.

Solution
CPM blocks may only directly contain CEE blocks.

3.39.20 10020
Entry does not exist.

Error ID
ERR_CL_ENTRYDOESNOTEXIST

Error name
CL_ENTRYNOTEXIST

Cause
The specified parameter does not exist in the function block.

Solution
Insure that the parameter specified is a valid member of the current function block.

3.39.21 10021
Out of memory.

Error ID
ERR_CL_OUTOFMEMORY

897
3 ERROR CODES

Error name
CL_OUTOFMEMORY

Cause
The Control Library failed when trying to allocate memory.

Solution
Work station may not have enough memory or there may be too many function blocks currently active - try
closing some charts.

3.39.22 10022
Duplicate symbol attributes.

Error ID
ERR_CL_DUPSYMBOLATTR

Error name
CL_DUPSYMBATTR

Cause
Client tried to create a symbol attribute (such as a block pin) that duplicated one that already exists.

Solution
Normally the Control Builder does not allow creating a duplicate pin so this error is normally expected.

3.39.23 10023
Another strategy copy is already in progress.

Error ID
ERR_CL_COPY_IN_PROGRESS

Error name
CL_COPYINPROGR

Cause
Only one copy operation may be active at a time. In a multi-user situation, a copy may have been already
initiated by another user.

Solution
Cancel copy and wait for copy in progress to complete.

3.39.24 10024
Invalid item <name> in copy strategy list.

898 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_INVALID_COPY_ITEM

Error name
CL_INVCOPYITEM

Cause
An invalid item was passed in the list of items to copy.

Solution
This error is generated as a result of copy list validation which is not implemented in current Experion PKS
releases.

3.39.25 10025
New parent is not in the same project as current parent.

Error ID
ERR_CL_NOT_SAME_PROJECT

Error name
CL_NOTSAMEPROJ

Cause
Upon moving a function block from one parent to another (such as assignment/deassignment), the new parent
belongs to a different project than the old.

Solution
There is only one project in current Experion PKS releases, so this error should never occur.

3.39.26 10026
Item <name> is not a CEE Block

Error ID
ERR_CL_NOT_CEE

Error name
CL_NOTCEE

Cause
An operation was attempted on a block that can only be done to a CEE block, such as assigning a block to a
CPM.

Solution
Only CEE blocks may be assigned to a CPM.

899
3 ERROR CODES

3.39.27 10027
Unable to delete <name> from CPM

Error ID
ERR_CL_DELFROMCTLR_FAILED

Error name
CL_DELFRMCPMFAIL

Cause
Deletion of a function block from the CPM failed. Usually this is due to inability to communicate with the
CPM, or perhaps the CPM was off-line when the original load occurred and does not contain the block.

Solution
use 'Force Delete' to delete the block from the loaded tab; or reload the CPM.

3.39.28 10028
Block Type Migration Failed

Error ID
ERR_CL_BTMIGRATIONFAILED

Error name
CL_BTMIGRATIONFAILED

Cause
Block Type Migration Failed

Solution
None.

3.39.29 10029
Errors encountered while Migrating Block Type

Error ID
ERR_CL_BLKTYP_MIG_MISC_ERROR

Error name
CL_BLKTYP_MIG_MISC_ERROR

Cause
Errors encountered while Migrating Block Type

900 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.39.30 10032
Invalid Connection.

Error ID
ERR_CL_ILLEGAL_CONNECTION

Error name
CL_ILLEGALCONN

Cause
Connection has invalid arguments, such as non-existent point or parameter.

Solution
Insure that point and parameter name are correct.

3.39.31 10033
Connection does not exist.

Error ID
ERR_CL_CONNECTION_NOT_EXISTING

Error name
CL_CONNNOTEXIST

Cause
An operation such as delete specified a connection that does not exist in the database.

Solution
There may be a discrepancy between the control drawing and the database.

3.39.32 10034
Connection already exists. No duplicate connections.

Error ID
ERR_CL_CONNECTION_EXISTING

Error name
CL_CONNEXISTS

Cause
An attempt was made to create a connection between two block attribute pairs which already have a connection
between them.

901
3 ERROR CODES

Solution
There can only be one connection between a point parameter pair. Remove the existing connection or cancel the
new connection.

3.39.33 10035
Cannot connect two inputs or two outputs.

Error ID
ERR_CL_CONNECTION_GENDER_MISMATCH

Error name
CL_CONNGENDMISMTCH

Cause
An output must connect to an input and vice versa.

Solution
Re-route the connection.

3.39.34 10036
Cannot connect two parameters of different types.

Error ID
ERR_CL_CONNECTION_TYPE_MISMATCH

Error name
CL_CONNTYPEMISMTCH

Cause
Tried to connect two attributes that do not match such as, a digital output to an analog input.

Solution
Re-route the connection.

3.39.35 10037
At most one connection to an input parameter allowed.

Error ID
ERR_CL_CONNECTION_LIMIT_EXCEEDED

Error name
CL_COMMLIMEXCD

Cause
An input can only have one connection otherwise it would be ambiguous as to its input value.

902 www.honeywell.com
 3 ERROR CODES

Solution
Revise the control strategy to eliminate the need for the double connection.

3.39.36 10038
At most one connection to an input parameter allowed.

Error ID
ERR_CL_CONNECTION_EXPOSURE

Error name
CL_CONNEXPOSE

Cause
An input can only have one connection otherwise it would be ambiguous as to its input value.

Solution
Revise the control strategy to eliminate the need for the double connection.

3.39.37 10039
Block at other end of connection missing for block <name>

Error ID
ERR_CL_CONNECTION_OTHER_END

Error name
CL_CONNOTHEND

Cause
A connection exists but the block at one end of the connection no longer exists.

Solution
A block may have been deleted and re-added. Edit the connection to add the new block.

3.39.38 10040
A maximum of one connection to this output is allowed.

Error ID
ERR_CL_CONNECTION_ONLY_1_PUSH

Error name
CL_ONLY1PUSH

Cause
Active outputs can push to only one parameter.

903
3 ERROR CODES

Solution
Delete the other connection to this output.

3.39.39 10041
This pin cannot support a parameter connector.

Error ID
ERR_CL_CONNECTION_ILLEGAL_PARAM_CONN

Error name
CL_INVPARAMCONN

Cause
Parameter connectors are not legal for most outputs.

Solution
Use graphical connection or add parameter connector to input parameter.

3.39.40 10042
Unexpected error, invalid pin information.

Error ID
ERR_CL_CONNECTION_INVALID_PIN_INFO

Error name
CL_INVALIDPIN

Cause
Template information in ERDB is incorrect.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.41 10043
Unexpected error, invalid storage parameter.

Error ID
ERR_CL_CONNECTION_INCORRECT_STORAGE_PARAM

Error name
INVSTOREPARAM

Cause
Template information in ERDB is incorrect.

904 www.honeywell.com
 3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.42 10044
Unexpected error, invalid storage parameter type.

Error ID
ERR_CL_CONNECTION_INCORRECT_STORAGE_PARAM_DT

Error name
INVSTOREPARAMTYPE

Cause
Template information in ERDB is incorrect.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.43 10045
Cannot create connection - External Reference not found.

Error ID
ERR_CL_CONNECTION_EXTREF_NOT_FOUND_CREATE

Error name
EXTREFNOTFOUNDCREATE

Cause
External Reference not found in memory when expected.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.44 10046
Parent containing the External Reference cannot be found.

Error ID
ERR_CL_CONNECTION_EXTREF_PARENT_NOT_FOUND

Error name
EXTREFPARENTNOTFOUND

Cause
Parent/containing block of External reference cannot be found.

905
3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.45 10047
Cannot delete connection - External Reference not found.

Error ID
ERR_CL_CONNECTION_EXTREF_NOT_FOUND_DELETE

Error name
EXTREFNOTFOUNDDELETE

Cause
External reference to be deleted cannot be found.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.46 10048
External reference not found.

Error ID
ERR_CL_CONNECTION_EXTREF_NOT_FOUND

Error name
EXTREFNOTFOUND

Cause
External Reference not found in memory when expected.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.47 10049
Cannot delete item: external references exist that use this block.

Error ID
ERR_CL_CONNECTION_EXTREF_FOUND_NO_DELETE

Error name
EXTREFFOUNDNODEL

Cause
External Reference Function Block cannot be deleted when references still exist using it.

906 www.honeywell.com
 3 ERROR CODES

Solution
Delete all references using the block, then delete the External Reference block.

3.39.48 10050
This non-scalar type parameter cannot be connected to an external reference.

Error ID
ERR_CL_CONNECTION_EXTREF_TYPE_MISMATCH

Error name
EXTREFTYPEMISMATCH

Cause
Non-scalar type parameter, other than type TC_EXTREFSTRUCT, cannot be connected to an external
reference.

Solution
None. This connection cannot be configured. Look for alternative strategy.

3.39.49 10051
Parent does not support OPC connections.

Error ID
ERR_CL_CONNECTION_INVALID_PARENT

Error name
INVALIDPARENT

Cause
The parent EE does not support OPC connections.

Solution
Assign block to an EE that supports OPC connections.

3.39.50 10052
Cannot assign this Control Module to CEE ACE because it contains PM I/O blocks/connections

Error ID
ERR_CL_CANNOT_ASSIGN_PMIO_CM

Error name
CANNOT_ASSIGN_PMIO_CM

Cause
The CEE_ACE does not support PM I/O connections.

907
3 ERROR CODES

Solution
Delete the PM I/O blocks and connections from the CM and try to reassign.

3.39.51 10053
Cannot use PM IO blocks/connections in a Control Module assigned to CEEACE.

Error ID
ERR_CL_ILLEGAL_PMIO_CONN

Error name
ILLEGAL_PMIO_CONN

Cause
The CEE_ACE does not support PM I/O connections.

Solution
None

3.39.52 10054
Connection invalid - A background connection could not be created.

Error ID
ERR_CL_HIDDEN_CONNECTION_FAILED

Error name
BKGNDCONNFAIL

Cause
A connection between an Instance and a User Template is not allowed when a hidden connection is involved.

Solution
None. This connection cannot be configured. Look for alternative strategy.

3.39.53 10055
Existing background connection conflicts with new request.

Error ID
ERR_CL_HIDDEN_CONNECTION_CONFLICTS_WITH_EXISTING

Error name
BKGNDCONNCONFLCT

Cause
User tried to create a connection that would also cause a background connection to be built. The background
connection will conflict with an existing background connection.

908 www.honeywell.com
 3 ERROR CODES

Solution
Use the report print function to print out the connections for the 2 blocks and examine the background
connections.

3.39.54 10056
Unexpected -- connection validation failed.

Error ID
ERR_CL_COULD_NOT_VALIDATE_CONNECTION

Error name
VALIDFAIL

Cause
Internal problem.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.39.55 10057
The pin on this block is used in a connection to another block.

Error ID
ERR_CL_PIN_HAS_CONNECTION

Error name
PINCONNCTD

Cause
The pin on this block is used in a connection to another block.

Solution
You must delete the connection before you can delete the pin.

3.39.56 10058
Cannot move top item upwards.

Error ID
ERR_CL_NO_SPACE_AVAILABLE

Error name
NOSPACE

Cause
The pin or faceplate parameter is at the top; cannot move upwards.

909
3 ERROR CODES

Solution
None. Item cannot be moved - no place to go.

3.39.57 10059
Cannot move; no free space available

Error ID
ERR_CL_SPACE_USED_BY_DERIVED_CHILDREN

Error name
SPACEUSED

Cause
Spaces in the pin or faceplate parameter form that may look like they're free may not be free, because those
places are in use by derived blocks.

Solution
pen child blocks and remove pins or faceplate parameters.

3.39.58 10060
A strategy cannot connect to a template.

Error ID
ERR_CL_CAN_NOT_CONNECT_TO_TEMPLATE

Error name
NOCONN2TMPLT

Cause
User has tried to connect a strategy to a template.

Solution
Use a substituted connection, if applicable.

3.39.59 10061
Must be a parameter connector.

Error ID
ERR_CL_NOT_PARAMETER_CONNECTOR

Error name
NOTPARAMCONN

Cause
Only parameter connectors can be modified. Other connections must be deleted and re-added.

910 www.honeywell.com
 3 ERROR CODES

Solution
Use parameter connector.

3.39.60 10062
Connection invalid since parameter is Template defining or Parent defined.

Error ID
ERR_CL_CONNECTION_INVALID_TO_TDPD

Error name
INVALIDPIN

Cause
Connections that write to a Template defining or Parent Defined parameter is not allowed.

Solution
None. This connection cannot be configured. Look for alternative strategy.

3.39.61 10063
For DOTYPE of <name>, expected only <name> parameter to have connection configured.

Error ID
ERR_CL_DOCHAN_DOTYPE_INCONSISTENT

Error name
None.

Cause
Input connection is inconsistent with DOTYPE.

Solution
Change the input connection to match DOTYPE.

3.39.62 10064
DOTYPE =NULL is useless. Change to SO, ONPULSE, or OFFPULSE.

Error ID
ERR_CL_DOCHAN_DOTYPE_NULL

Error name
None.

Cause
DOTYPE is set to NULL.

911
3 ERROR CODES

Solution
Change the DOTYPE to SO, ONPULSE, or OFFPULSE.

3.39.63 10065
DOTYPE =NULL is useless. Change to SO, ONPULSE, or OFFPULSE.

Error ID
ERR_CL_DOCHAN_DOTYPE_NULL

Error name
None.

Cause
DOTYPE is set to NULL.

Solution
Change the DOTYPE to SO, ONPULSE, or OFFPULSE.

3.39.64 10066
Cannot connect pins of PM IO or Series C IO channels to LIOM blocks or channels.

Error ID
ERR_CL_ILLEGAL_PMIO_TO_LIOM_CONN

Error name
CL_ILLEGAL_PMIO_TO_LIOM_CONN

Cause
Trying to connect a PM IO or Series C IO channel to LIOM blocks or channels.

Solution
None. This connection cannot be configured. Look for alternative strategy

3.39.65 10070
Cannot modify system templates.

Error ID
ERR_CL_CANT_EDIT_SYSTEM_TEMPLATE

Error name
NOEDITSYSTMPLT

Cause
User tried to modify a Honeywell defined system template.

912 www.honeywell.com
 3 ERROR CODES

Solution
None. This is not allowed.

3.39.66 10071
Cannot delete system templates.

Error ID
ERR_CL_DELETE_EDIT_SYSTEM_TEMPLATE

Error name
NODELETESYSTMPLT

Cause
User tried to delete a Honeywell defined system template.

Solution
None. This is not allowed.

3.39.67 10072
Cannot delete; block has derived children.

Error ID
ERR_CL_HAS_DERIVED_CHILDREN

Error name
HASDERVDCHILD

Cause
User tried to delete a container block or standalone template that has derived children. Not allowed at this time.

Solution
Delete derived children first, then can delete template.

3.39.68 10073
Attempt to make the parameter template defining failed, since there is an existing connection.

Error ID
ERR_CL_CONNECTION_EXISTING_CANTTD

Error name
CONNECTIONEXISTINGCANTTD

Cause
The parameters with existing connections cannot be made template defining.

913
3 ERROR CODES

Solution
None.

3.39.69 10074
Attempt to make the parameter template defining failed, since there is an existing connection in a derived
template or instance.

Error ID
ERR_CL_CONNECTION_EXISTING_DERIV_CANTTD

Error name
CONNECTIONEXISTINGDERIVCANTTD

Cause
The parameters with existing connections at a derived level template or instance cannot be made template
defining.

Solution
None.

3.39.70 10075
No Parent in this View.

Error ID
ERR_CL_NO_PARENT_FOR_VIEW

Error name
NOPARENTFORVIEW

Cause
There is no containment or assignment parent for a standalone user template.

Solution
None.

3.39.71 10076
Cannot Refer to Another User Template.

Error ID
ERR_CL_CANNOT_REFER_TO_USER_TEMPLATE

Error name
CL_CANNOT_REFER_TO_USER_TEMPLATE

914 www.honeywell.com
 3 ERROR CODES

Cause
Cannot connect or refer to another user template that is outside of the CM/SCM with a parameter connector or
block id parameter (for example, SCMMONSRC).

Solution
Use substitute block name or, in some cases, substitute parameter.

3.39.72 10077
Error exposing parameters as pin or on faceplate.

Error ID
ERR_CL_NO_PIN_EXPO_PERMISSION

Error name
CL_NO_PIN_EXPO_PERMISSION

Cause
Error exposing the parameter as pin or on faceplate.

Solution
None.

3.39.73 10078
Cannot delete. Block edit is in progress

Error ID
ERR_CL_DELETE_BLKEDIT_INPROGRESS

Error name
CL_DELETE_BLKEDIT_INPROGRESS

Cause
User tried to delete a block when block edit is in progress.

Solution
Close all edit sessions of the block, then delete template.

3.39.74 10079
Cannot Rename Library. Block edit is in progress for some blocks of the Library

Error ID
ERR_CL_LIBRENAME_BLKEDIT_INPROGRESS

Error name
CL_LIBRENAME_BLKEDIT_INPROGRESS

915
3 ERROR CODES

Cause
User tried to Rename a library when edit is in progress for some blocks of the library.

Solution
Close all edit sessions of the block, then rename library.

3.39.75 10080
Cannot delete Library. Library has templates

Error ID
ERR_CL_LIBDELETE_HASTEMPLATES

Error name
CL_LIBDELETE_HASTEMPLATES

Cause
User tried to delete a Library that has templates.

Solution
Delete templates first, then can delete Library.

3.39.76 10081
Cannot delete System Libraries

Error ID
ERR_CL_LIBDELETE_SYSTEM

Error name
CL_LIBDELETE_SYSTEM

Cause
User tried to delete a Honeywell defined system library

Solution
None. This is not allowed.

3.39.77 10082
Cannot rename the block type since its edit session is in progress.

Error ID
ERR_CL_BLKRENAME_BLKEDIT_INPROGRESS

Error name
CL_BLKRENAME_BLKEDIT_INPROGRESS

916 www.honeywell.com
 3 ERROR CODES

Cause
User tried to rename a block type when it is being edited.

Solution
Close the edit session of the block type, then rename it.

3.39.78 10083
Cannot Rename the block type since it has loaded instances

Error ID
ERR_CL_BLKRENAME_INSTANCE_EXISTS

Error name
CL_BLKRENAME_INSTANCE_EXISTS

Cause
User tried to rename a block type when it has loaded instances

Solution
Delete the loaded instances first, then rename it.

3.39.79 10084
Cannot rename the library since one of its contained block types has loaded instances.

Error ID
ERR_CL_LIBRENAME_BLKTYPE_INSTANCE_EXISTS

Error name
CL_LIBRENAME_BLKTYPE_INSTANCE_EXISTS

Cause
User tried to rename a library but one of its contained block types has loaded instances.

Solution
Delete the loaded instances of the block type first, then rename it.

3.39.80 10085
Custom type has been edited since the last load. CM is marked as mismatched and is not restored.

Error ID
ERR_CL_CPREBUILDINCOMP

Error name
CL_CPREBUILDINCOMP

917
3 ERROR CODES

Cause
The checkpoint file is requested to be rebuilt. If you choose to continue, the CMs listed are not restored with the
rest of the file.

Solution
Re-load this tagged block from the project side.

3.39.81 10086
The parameter is not editable according to edit information.

Error ID
ERR_CL_NOTEDITABLE

Error name
CL_NOTEDITABLE

Cause
A value was entered to a parameter that is not editable according to its edit information.

Solution
none

3.39.82 10087
The block cannot be renamed because at least one loaded Master recipe may be affected.

Error ID
ERR_CL_UNIT_RENAME_ASST_MR_LOADED

Error name
CL_UNIT_RENAME_ASST_MR_LOADED

Cause
1. Name of UCM's user-defined templates (UDT) or Unit class or their instances associated with the Master
recipe are modified.
2. Name of UCM's UDTs or Unit class that is loaded is modified.

Solution
1. From the Monitoring view, delete the loaded Master recipe before changing the name of the UDT or Unit
class.
2. From the Monitoring view, delete the loaded instance(s) before changing the name of UDT or Unit class.

3.39.83 10088
UDT or Unit class associated with the Master recipe cannot be deleted, since at least one loaded Master recipe
may be affected.

918 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_UNIT_DELETE_ASST_MR_LOADED

Error name
CL_UNIT_DELETE_ASST_MR_LOADED

Cause
Deleting UCM's UDT or Unit class associated with the loaded Master recipe.

Solution
Remove the Master recipe or remove the association from the Master recipe.

3.39.84 10089
UDT or Unit class associated with the child block cannot be deleted, because at least one loaded Master recipe
may be affected.

Error ID
ERR_CL_UNIT_CHILD_DELETE

Error name
CL_UNIT_CHILD_DELETE

Cause
Child block of UCM's UDT or Unit class (or there instance) is getting deleted and it is associated with the
loaded Master recipe.

Solution
Remove the Master recipe or remove the association from the Master recipe.

3.39.85 10090
Change Parent operation cannot be performed because at least one loaded Master recipe may be affected by
the operation.

Error ID
ERR_CL_UNIT_CP_ASST_MR_LOADED

Error name
CL_UNIT_CP_ASST_MR_LOADED

Cause
Block is associated with the loaded Master recipe.

Solution
Remove the Master recipe or remove the association from the Master recipe.

919
3 ERROR CODES

3.39.86 10091
The new user library name conflicts with an existing custom, system, or vendor library name.

Error ID
ERR_CL_USER_LIBNAME_CONFLICT

Error name
CL_USER_LIBNAME_CONFLICT

Cause
The name of the library that already exists as a system, custom, or vendor library is entered.

Solution
Change the name of the library and try again.

3.39.87 10092
Type name entered exceeds the maximum length, or the syntax of the name is incorrect.

Error ID
ERR_CL_TYPENAME_INVALID

Error name
CL_TYPENAME_INVALID

Cause
The name entered is too long or an invalid syntax name is entered:
1. Type names must not be greater than 40 characters.
2. The only special character allowed in the Type name is the underscore '-'.
3. Type names must have at least one alpha character.

Solution
Ensure that the Type name is less than or equal to 40 characters and does not contain any special characters.

3.39.88 10093
The new Type name cannot be used as it conflicts with the name of another existing type.

Error ID
ERR_CL_TYPENAME_CONFLICT

Error name
CL_TYPENAME_CONFLICT

Cause
The Type name entered is not unique.

920 www.honeywell.com
 3 ERROR CODES

Solution
Change the Type name and try again.

921
3 ERROR CODES

3.40 Codes 10100 to 10199

Related topics
“10100” on page 924
“10101” on page 924
“10102” on page 924
“10103” on page 925
“10104” on page 925
“10105” on page 926
“10106” on page 926
“10107” on page 926
“10108” on page 927
“10109” on page 927
“10110” on page 928
“10111” on page 928
“10112” on page 928
“10113” on page 929
“10114” on page 929
“10115” on page 929
“10116” on page 930
“10117” on page 930
“10118” on page 930
“10119” on page 931
“10120” on page 931
“10121” on page 931
“10122” on page 932
“10123” on page 932
“10124” on page 933
“10125” on page 933
“10126” on page 933
“10127” on page 934
“10128” on page 934
“10129” on page 934
“10130” on page 935
“10131” on page 935
“10132” on page 936
“10133” on page 936
“10134” on page 936
“10135” on page 937
“10136” on page 937
“10137” on page 937
“10138” on page 938
“10139” on page 938
“10140” on page 938
“10141” on page 939
“10142” on page 939
“10143” on page 939

922 www.honeywell.com
 3 ERROR CODES

“10144” on page 940

“10145” on page 940
“10146” on page 941
“10147” on page 941
“10148” on page 941
“10150” on page 942
“10151” on page 942
“10152” on page 942
“10153” on page 943
“10154” on page 943
“10155” on page 943
“10156” on page 944
“10157” on page 944
“10158” on page 944
“10159” on page 945
“10160” on page 945
“10161” on page 945
“10162” on page 946
“10170” on page 946
“10171” on page 947
“10172” on page 947
“10173” on page 947
“10174” on page 948
“10175” on page 948
“10176” on page 948
“10177” on page 949
“10178” on page 949
“10179” on page 949
“10180” on page 950
“10181” on page 950
“10182” on page 951
“10183” on page 951
“10184” on page 951
“10185” on page 952
“10186” on page 952
“10187” on page 952
“10188” on page 953
“10189” on page 953
“10190” on page 953
“10191” on page 954
“10192” on page 954
“10193” on page 954
“10194” on page 955
“10195” on page 955
“10196” on page 956
“10197” on page 956
“10198” on page 956
“10199” on page 957

923
3 ERROR CODES

3.40.1 10100
<name> Parameter not found in strategy/template.

Error ID
ERR_CL_PARAM_NOT_FOUND

Error name
CL_PRMNOTFOUND

Cause
A parameter was specified that does not exist in the current function block.

Solution
Verify that the correct parameter name was used.

3.40.2 10101
Failed to allocate CDA buffer.

Error ID
ERR_CL_CDABUFFER_ALLOC

Error name
CL_CDABUFALLOC

Cause
An action that requires use of Control Data Access, such as Controller Load, Upload, or Delete, failed, as a
buffer for specifying the operation could not be allocated.

Solution
Out of memory - see CL_OUTOFMEMORY.

3.40.3 10102
Error in EEC assignment for block: <name>

Error ID
ERR_CL_ASSIGN_EEC

Error name
CL_ASSIGNEEC

Cause
During assignment of a CM or SCM, was unable to assign as block had no Execution Environment Code
(EEC).

924 www.honeywell.com
 3 ERROR CODES

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.4 10103
Error in IOC assignment block: <name>

Error ID
PS_E_CL_ASSIGN_IOC

Error name
CL_ASSIGNIOC

Cause
Unable to assign Independent Object Code (IOC) for the specified function block.

Solution
This error may be caused by too many CMs and SCMs assigned to the IOC. Refer to the Spec and Tech for the
maximum limit.
This may also be an abnormal situation indicating mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.5 10104
Error in DOC assignment block: <name>

Error ID
ERR_CL_ASSIGN_DOC

Error name
CL_ASSIGNDOC

Cause
Unable to assign Dependent Object Code (DOC) for the specified function block.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

925
3 ERROR CODES

3.40.6 10105
Parameter specified as a connector is invalid.

Error ID
ERR_CL_BAD_CONNECTION_PARAM

Error name
CL_BADCONNPARM

Cause
An invalid parameter name was passed upon an attempt to make a connection.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.7 10106
Bad parameter index for tag <name>.

Error ID
ERR_CL_BAD_INDEX

Error name
CL_BADINDX

Cause
A parameter index was specified that is out of range.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.8 10107
Load phase is invalid in operation.

Error ID
ERR_CL_INVALID_LOAD_PHASE

926 www.honeywell.com
 3 ERROR CODES

Error name
CL_INVLDPHASE

Cause
A Load to Controller operation detected a load phase that is illegal.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.9 10108
<name> Invalid parameter type.

Error ID
ERR_CL_INVALID_PARAM_TYPE

Error name
CL_INVPRMTYPE

Cause
A Control Library operation expected one type of function block parameter, but the name specified was of a
different type - for example, upon checking ORDERINCM while ordering blocks for execution, an integer was
expected but ORDERINCM was defined as a string parameter.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.10 10109
Invalid Name <name>

Error ID
ERR_CL_BADNAME

Error name
CL_BADNAME

Cause
An invalid function block name was entered. This can include a name that is too long, or contains invalid
characters. For operations that require a name of an existing item, the name could not be found in the database.

927
3 ERROR CODES

Solution
Correct the spelling and length of the name to be a valid Experion PKS name.

3.40.11 10110
Block <name> is in an invalid life cycle state.

Error ID
ERR_CL_INVALID_LIFECYCLE_STATE

Error name
CL_INVLIFCYCST

Cause
Life Cycle state refers to initial, assigned, or loaded. For example an attempt was made to load a block that has
not been assigned to the target CEE.

Solution
Check that the block is in the correct state for the operation you are trying to perform.

3.40.12 10111
Block <name> component type is invalid for this operation.

Error ID
ERR_CL_INVALID_COMPONENT_TYPE

Error name
CL_IINVCMPTYP

Cause
Component type (basic CM block, Step/Transition, CM, SCM, CEE, and so on) is invalid for the operation. For
example, trying to embed a STEP within a CM.

Solution
Make sure that the operation is using the correct block types.

3.40.13 10112
Invalid Boolean String.

Error ID
ERR_CL_INVALID_BOOLEAN_STRING

Error name
CL_INVBOOLSTR

928 www.honeywell.com
 3 ERROR CODES

Cause
Only NO, OFF, FALSE, YES, ON and TRUE (in upper and /or lower case) are valid as Boolean (logical) string
values.

Solution
None.

3.40.14 10113
Maximum BLOB size exceeded.

Error ID
ERR_CL_MAX_BLOB_SIZE_EXCEEDED

Error name
CL_MAXBLOBSZEXCD

Cause
A binary object (BLOB) parameter is too large to save in the database.

Solution
This error is not currently issued by any R120 Control Library function.

3.40.15 10114
Invalid BLOB format.

Error ID
ERR_CL_INVALID_BLOB_FORMAT

Error name
CL_INVBLOBFMT

Cause
A binary object (BLOB) parameter is in an invalid format.

Solution
This error is not currently issued by any R120 Control Library function.

3.40.16 10115
Invalid Delta Time format.

Error ID
ERR_CL_INVALID_DELTATIME_FORMAT

Error name
CL_INVDTIMEFMT

929
3 ERROR CODES

Cause
A Delta Time parameter is in an invalid format.

Solution
This error is not currently issued by any R120 Control Library function.

3.40.17 10116
Invalid Delta Time Database.

Error ID
ERR_CL_INVALID_DELTATIME_DB

Error name
CL_INVDTIMEDB

Solution
None.

Solution
This error is not currently issued by any R120 Control Library function.

3.40.18 10117
Initialization of CDA failed.

Error ID
ERR_CL_INIT_OF_CDA_FAILED

Error name
CL_INITCDAFAIL

Cause
Unable to communicate with Control Data Access program.

Solution
Verify that Experion PKS Control Data Access service is running. Select Start -> Settings -> Control Panel and
select the 'Services' icon. The entry for 'Experion PKS Control Data Access' should have a status of 'starting'. If
not, select 'Start' to start it. If it fails to start, check NT event log for reason.

3.40.19 10118
Initialization of SR failed.

Error ID
ERR_CL_INIT_OF_SR_FAILED

930 www.honeywell.com
 3 ERROR CODES

Error name
CL_INITSRFAIL

Cause
Unable to communicate with System Repository.

Solution
Verify that Experion PKS System Repository service is running. Select Start -> Settings -> Control Panel and
select the 'Services' icon. The entry for 'Experion PKS System Repository' should have a status of 'starting'. If
not, select 'Start' to start it. You will also need to start Experion PKS Control Data Access service. If it fails to
start, check NT event log for reason.

3.40.20 10119
Delete from Control Processor module (CPM) failed.

Error ID
ERR_CL_DELETE_FROM_PCM_FAILED

Error name
CL_DELPCMFAIL

Cause
Attempt to delete a function block from its controller failed.

Solution
This error is obsolete and has been replaced by other errors.

3.40.21 10120
Invalid Delete List.

Error ID
ERR_CL_INVALID_DELETE_LIST

Error name
CL_INVDELLIST

Cause
Invalid item in delete list.

Solution
This error is obsolete and has been replaced by other errors.

3.40.22 10121
Unable to open strategy on CEE.

931
3 ERROR CODES

Error ID
ERR_CL_CANT_OPEN_CEE

Error name
CL_CANTOPENCEE

Cause
Unable to access CEE function block in database during assignment of CEE to CPM or function blocks to CEE.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.23 10122
Unable to open strategy on Control Processor module (CPM).

Error ID
ERR_CL_CANT_OPEN_PCM

Error name
CL_CANTOPENPCM

Cause
Unable to access CPM (controller) function block in database during assignment of CEE to CPM.

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.24 10123
Only loaded blocks should be selected.

Error ID
ERR_CL_EDIT_ID_IN_LIST

Error name
CL_EDIDINLST

Cause
An operation (such as update from loaded) was passed a list that contained a block which is in Edit state.

932 www.honeywell.com
 3 ERROR CODES

Solution
This is an abnormal situation and either indicates mismatched Control Builder software components, a software
bug, or possibly a corrupted database. Recover database from secondary or backup copy.
Using Properties in Explorer, verify that the Control Builder, Control Library (LIB.OCX) and the Function
Block OCX files are all labeled with the currently installed release. If the software versions are incorrect, re-
install the software. If this does not resolve the situation, notify TAC.

3.40.25 10124
Block referenced cannot be loaded from the ER Database.

Error ID
ERR_CL_CANT_LOAD_STRATEGY

Error name
CL_CANTLDSFROMERDB

Cause
There is a reference to a deleted block that no longer exists in the ERDB.

Solution
Delete the reference (usually a dangling connection).

3.40.26 10125
Error accessing database.

Error ID
ERR_CL_DATABASE_ERROR

Error name
CL_DBERROR

Cause
An error was returned by the ERDB Manager. Generally this means that there was a problem opening a
database connection or creating a query.

Solution
For database errors, the specific cause of the problem is logged in the error log. Use Notepad to view the file C:
\Documents and Settings\All Users\Application Data\Honeywell\Experion PKS\ErrLog_1.txt. There should be
an entry after the one for this error from ODBC that gives the specific reason for the problem. See the
discussion under the Database Errors section.

3.40.27 10126
Error in database query operation.

Error ID
ERR_CL_DB_QUERY_ERROR

933
3 ERROR CODES

Error name
CL_DBQRYERROR

Cause
An error was returned by and ERDB Query. For example, an attempt to update a record in the database that
doesn't exist.

Solution
For database errors, the specific cause of the problem is logged in the error log. Use Notepad to view the file C:
\Documents and Settings\All Users\Application Data\Honeywell\Experion PKS\ErrLog_1.txt. There should be
an entry after the one for this error from ODBC that gives the specific reason for the problem. See the
discussion under the Database Errors section.

3.40.28 10127
Unable to create function block <name> in controller: err <number>: <text>

Error ID
ERR_CL_CDA_NOCREATEFB

Error name
CL_CDANOCRFB

Cause
In some cases, this error has been replaced by specific CEE error texts.

Solution
None.

3.40.29 10128
Unable to delete block <name> from CPM: err <number>: <text>

Error ID
ERR_CL_DELETE_FROM_CTLR_FAILED

Error name
CL_DELCPMFAIL

Cause
This error is obsolete and has been replaced by specific DCA and CEE error texts.

Solution
None.

3.40.30 10129
Cannot delete block <name> - block has children.

934 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_HAS_CHILDREN

Error name
CL_HASCHILD

Cause
Attempted to delete a function block that contains children such as a CEE block with assigned CM/SCM blocks.

Solution
Delete the child blocks first, then delete the parent.

3.40.31 10130
Unable to load template <name>.

Error ID
ERR_CL_CANT_LOAD_TEMPLATE

Error name
CL_CANTLDTEMP

Cause
An attempt to load the named Template from the database failed.

Solution
Possible database corruption, or incorrect database version for this release. Verify that database migration was
performed correctly during software upgrade as specified in release notes. If database corruption is suspected,
recover database from backup or secondary copy.

3.40.32 10131
Error returned from CDA: <name>

Error ID
ERR_CL_CDA_ERROR

Error name
CL_CDAERROR

Cause
This error is obsolete and has been replaced by specific CDA and CEE error texts.

Solution
None.

935
3 ERROR CODES

3.40.33 10132
Cannot start load, wait for other load or upload to complete.

Error ID
ERR_CL_LOAD_INPROGRESS

Error name
CL_LDINPROG

Cause
A load or upload is already in progress. Only one load/upload can be running at a time, even if they are to
different CPMs.

Solution
Wait for loads to complete.

3.40.34 10133
Cannot start upload, wait for other load or upload to complete.

Error ID
ERR_CL_UPLOAD_INPROGRESS

Error name
CL_ULINPROG

Cause
A load or upload is already in progress. Only one load/upload can be running at a time, even if they are to
different CPMs.

Solution
Wait for loads to complete.

3.40.35 10134
Load phase is invalid in operation.

Error ID
ERR_CL_INVALID_UPLOAD_FAILED

Error name
CL_INVLDUPLDPHASE

Cause
An Upload to Controller operation detected an upload phase that is illegal.

936 www.honeywell.com
 3 ERROR CODES

Solution
Should not occur. May to be a bug.

3.40.36 10135
Upload From Controller Failed

Error ID
ERR_CL_UPLOAD_FAILED

Error name
CL_UPLOAD_FAIL

Cause
The upload failed completely due to a severe fatal error. Additional errors should have been posted in the error
list to indicate the specific reason, such as loss of communication with controller.

Solution
Use the error list (and error log if needed) to locate and correct the specific problem and try again.

3.40.37 10136
Upload From Controller Succeeded

Error ID
ERR_CL_UPLOAD_SUCCEEDED

Error name
CL_UPLOADSUCCEED

Cause
The Upload operation completed without fatal error.

Solution
The upload succeeded, although there may be non-fatal errors that may need attention.

3.40.38 10137
Block<name> Upload Failed

Error ID
ERR_CL_BLOCKUPLOAD_FAILED

Error name
CL_BLKUPLOADFAIL

937
3 ERROR CODES

Cause
Upload of a specific block could not be done due to a fatal error. Other blocks may have been uploaded
successfully. Additional errors should have been posted in the error list to indicate the specific reason.

Solution
Use the error list (and error log if needed) to locate and correct the specific problem and try again.

3.40.39 10138
Some Blocks Upload Failed

Error ID
ERR_CL_SOMEBLOCKSUPLOAD_FAILED

Error name
CL_SOMEBLKSUPLOADFAIL

Cause
The Upload operation completed without a severe fatal error but some blocks were not uploaded. Additional
errors should have been posted in the error list to indicate the specific reason.

Solution
Use the error list (and error log if needed) to locate and correct the specific problem and try again.

3.40.40 10139
Block <name> Load Failed, when loading CM or SCM.

Error ID
ERR_CL_BLOCKLOAD_FAILED

Error name
CL_BLKLOADFAIL

Cause
• Load of a specific block could not be done due to a fatal error. Other blocks may have been loaded
successfully. Additional errors should have been posted in the error list to indicate the specific reason.
• The checkpoint file for the controller (C200, C300, or ACE) has been corrupted and will not open.

Solution
• Use the error list (and error log if needed) to locate and correct the specific problem and try again.
• In Monitoring tab, right-click the CPM (not the CEE) and select Checkpoint>Rebuild selected object(s) and
contents checkpoint from monitoring tab. Wait about 4 minutes and try loading the CM/SCM again.

3.40.41 10140
Invalid connection to unassigned block <name> detected.

938 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_CONNECTION_TO_UNASSIGNED

Error name
CL_INVCONNTOUNASSIGNED

Cause
The load process detected that a block had a connection to the named block which was unassigned.

Solution
Assign the named block to the CEE; or delete the connection.

3.40.42 10141
Cannot delete <name>: must delete from loaded first.

Error ID
ERR_CL_MUST_DEL_FROM_LOADED

Error name
CL_MUSTDELFRMLOADED

Cause
Attempt to delete a function block from the edit tab that exists on the loaded tab.

Solution
Select loaded tab and delete the block there first. If block is not in the controller or the controller is not on-line,
may have to use 'force delete'.

3.40.43 10142
Block Name <name> not found

Error ID
ERR_CL_NAME_NOT_FOUND

Error name
CL_NAMENOTFOUND

Cause
User tried to reference a tag name that does not exist.

Solution
Check that correct name was entered and try again.

3.40.44 10143
Template Name Not Found

939
3 ERROR CODES

Error ID
ERR_CL_BADTEMPLNAME

Error name
CL_BADTEMPLNAME

Cause
User tried to look up a template name that doesn't exist.

Solution
Verify name was entered correctly and try again.

3.40.45 10144
Warning: Connections to/from Control Module/Sequential Control Module blocks may have changed.

Error ID
ERR_CL_CONNS_MAY_CHANGE

Error name
CL_CONNSMAYCHANGE

Cause
In order not to leave dangling hidden connections, some connections may be deleted during Update to Project.

Solution
May be able to leave as is, or perhaps may want to pick a bigger collection of blocks to update from the monitor
side.

3.40.46 10145
Background connections to/from other blocks may change during update to project. Some blocks could not be
locked.

Error ID
ERR_CL_LOCK_BLKS_W_BACKGRND_CONNS

Error name
CL_LOCKEXTRABLKS

Cause
In order not to leave dangling hidden connections, some connections may be deleted during Update to Project.
The owning blocks must be locked for deletion to work correctly.

Solution
Close open chart.

940 www.honeywell.com
 3 ERROR CODES

3.40.47 10146
Invalid Unit Enumeration found.

Error ID
ERR_CL_INVALID_UNIT_ENUMERATION

Error name
CL_INVALIDUNITENUM

Cause
If the FF Unit code is less than 1000 or greater than 1600, it is an invalid enumeration.

Solution
Enter an ordinal value between 1000 and 1600.

3.40.48 10147
Block snapshot failed.

Error ID
ERR_CL_BLOCKSNAPSHOT_FAILED

Error name
CL_ BLOCKSNAPSHOT _FAILED

Cause
Failure during snapshot.

Solution
None

3.40.49 10148
Indicates the incompatibility with controller firmware version.

Error ID
CCLL_PCM_COMPATIBILITY

Error name
CL_COMPATIBILITY

Cause
CCL version and the controller firmware version are incompatible.

Solution
Firmware image on the controller must be upgraded to match the CCL version.

941
3 ERROR CODES

3.40.50 10150
Parameter error.

Error ID
CCLL_PARAMETER_E

Error name
CL_PARAMERR

Cause
An internal error may occur when attempting to load Custom Control Libraries (CCL) to the controller.

Solution
CCL may be invalid. Verify that correct CCL files are loaded to workstation.

3.40.51 10151
CCL load function is busy.

Error ID
CCLL_FUNCTIONBUSY_E

Error name
CL_LOADBUSY

Cause
The Custom Control Library (CCL) cannot be loaded. Another CCL load is already in progress.

Solution
Wait until other load has completed and try again.

3.40.52 10152
CCL loading is not allowed due to redundancy state.

Error ID
CCLL_LOADNOTALLOWED_E

Error name
CL_BADREDUNSTATE

Cause
None.

Solution
None.

942 www.honeywell.com
 3 ERROR CODES

3.40.53 10153
Error in reading CCL from ER.

Error ID
CCLL_CCLREAD_E

Error name
CL_READERR

Cause
None.

Solution
None.

3.40.54 10154
Error in reading via CDA.

Error ID
CCLL_CDAREAD_E

Error name
CL_CDAREADERR

Cause
None.

Solution
None.

3.40.55 10155
Error in writing via CDA.

Error ID
CCLL_CDAWRITE_E

Error name
CL_WRITERR

Cause
None.

Solution
None.

943
3 ERROR CODES

3.40.56 10156
Library <name> is not loaded to CPM <CPM Name>.

Error ID
CCLL_PCM_E

Error name
CL_LIBERR

Cause
One or more errors were returned from the controller when attempting to load a Custom Control Library (CCL).
The error(s) should be listed in the error display preceding this error.

Solution
Correct the errors returned by the controller, then repeat the load.

3.40.57 10157
Data type mismatch error.

Error ID
CCLL_WRONG_DATATYPE

Error name
None

Cause
When reading Custom Control Library names, redundancy state, or load status from controller, a value of the
wrong data type was returned.

Solution
There may be a mismatch between the controller database and the ERDB. Verify that the controller is up to date
and the correct ERDB is in use.

3.40.58 10158
Failed to create a CDA event object used as part of the controller read operation.

Error ID
CCLL_CREATE_CDA_EVENT

Error name
None

Cause
The NT operating system was unable to create the requested object.

944 www.honeywell.com
 3 ERROR CODES

Solution
Notify TAC.

3.40.59 10159
Wait on CDA event timeout

Error ID
CCLL_CDA_EVENT_TIMEOUT

Error name
None

Cause
A wait for a read or write operation from/to the controller timed out. Communication to the controller may have
been lost.

Solution
Verify the link to the controller is working or restore the link. Repeat the operation.

3.40.60 10160
Failed to connect to the primary ER, connected to secondary.

Error ID
ERR_DB_SWITCHTOREPLICA

Error name
DB_SWITCHTOREPLICA

Cause
On a system with redundant ERDB, the connection to the primary ER was lost. The Control Builder is now
connected to the secondary ER, a read-only operation.

Solution
Do not attempt to recover the primary database unless instructed by Honeywell.
• Verify that the Server B is running.
• Verify that the ER service in the Server B is running.
• Verify that the MSSQL Server service is running on the Server B.
• Ensure that the mngr passwords are synchronized using the Windows services and DCOM logon tool.
• Disable the replication and then enable the replication.
• Reboot the Server B.

3.40.61 10161
Re-connected to primary ER.

945
3 ERROR CODES

Error ID
ERR_DB_SWITCHTOMASTER

Error name
DB_SWITCHTOMASTER

Cause
An informational message indicating the Control Builder is using the primary ERDB again, and normal
operation may resume.

Solution
None

3.40.62 10162
Cannot change secondary ER.

Error ID
ERR_CL_CANTCHGREPLICA

Error name
CL_CANTCHGREPLICA

Cause
An operation was attempted that would change the secondary ERDB. This operation is not permitted because
the secondary ERDB cannot be written to.

Solution
Restore connection to primary ERDB. If primary ERDB has been lost, follow ERDB recovery procedures listed
in the Software Change Notice (SCN) documentation.

3.40.63 10170
Failed to open snapshot file for <name>.

Error ID
ERR_CL_OPENSNAPSHOT

Error name
CL_OPENSNAPSHOT

Cause
Unable to open the Checkpoint file for the named controller. Refer to the error log for more information as to
why the open failed. The file may be missing or write-protected.

Solution
If the file is missing, it can be re-created from Control Builder using 'Rebuild selected objects(s) and contents
checkpoint from monitoring tab.'

946 www.honeywell.com
 3 ERROR CODES

3.40.64 10171
Snapshot capability is currently disabled.

Error ID
ERR_CL_SNAPSHOTDISABLED

Error name
CL_SNAPSHOTDISABLED

Cause
The snapshot feature is normally enabled, but may be disabled via an entry in the NT registry.

Solution
Use Registry Editor to change the following key:
In HKEY_LOCAL_MACHINE, SOFTWARE\Honeywell\TPS50SYS\SNAPSHOT,
set enabled = 1.

3.40.65 10172
Failed to read parameter value from snapshot : <name>.

Error ID
ERR_CL_SNAPSHOTPARAM

Error name
CL_SNAPSHOTPARAM

Cause
Read of the value for the named parameter failed during an upload operation from the snapshot file to the
loaded tab.

Solution
Snapshot file may be corrupt. Re-create snapshot from controller.

3.40.66 10173
Not enough information for <name> in snapshot.

Error ID
ERR_CL_SNAPSHOTCORRUPT

Error name
CL_SNAPSHOTCORRUPT

Cause
The snapshot file was missing key information needed in order to load the controller.

947
3 ERROR CODES

Solution
Snapshot file appears to be corrupt. Re-create snapshot from loaded tab.

3.40.67 10174
Snapshot of <name> does not have CPM block.

Error ID
ERR_CL_SNAPSHOTNOCPM

Error name
CL_SNAPSHOTNOCPM

Cause
A snapshot or load from snapshot operation requires the snapshot file to contain a CPM block.

Solution
Repeat operation, insuring that a CPM block is selected as part of the operation.

3.40.68 10175
Snapshot of <name> does not have CEE block.

Error ID
ERR_CL_SNAPSHOTNOCEE

Error name
CL_SNAPSHOTNOCEE

Cause
A snapshot or load from snapshot operation requires the snapshot file to contain a CEE block.

Solution
Repeat operation, insuring that a CEE block is selected as part of the operation.

3.40.69 10176
Structure revision mismatch for <name>.

Error ID
ERR_CL_STRUCTREV

Error name
CL_STRUCTREV

Cause
The snapshot file and the controller are out of date with respect to each other, so the file cannot be loaded or
saved to.

948 www.honeywell.com
 3 ERROR CODES

Solution
Re-create the snapshot file from the controller or the loaded tab.

3.40.70 10177
Failed to get file information <name>.

Error ID
ERR_CL_DBFILEINFO

Error name
CL_DBFILEINFO

Cause
None.

Solution
None.

3.40.71 10178
Failed to open file <name>.

Error ID
ERR_CL_OPENFILE

Error name
CL_OPENFILE

Cause
Unable to open the snapshot file for the named controller. Refer to the error log for more information as to why
the open failed. The file may be missing or write-protected.

Solution
If the file is missing, it can be re-created from Control Builder using 'update snapshot from loaded'.

3.40.72 10179
Failed to get current ER name.

Error ID
ERR_CL_DBNAME

Error name
CL_DBNAME

949
3 ERROR CODES

Cause
Unable to get the current ER database directory name because the snapshot files are placed in the same directory
as the ERDB.

Solution
Verify that ODBC data source is set up correctly.

3.40.73 10180
Failed to backup snapshot file <name>.

Error ID
ERR_CL_SNAPSHOTBACKUP

Error name
CL_SNAPSHOTBACKUP

Cause
Unable to create a backup copy of the snapshot file. Check the error log for a following system error message
that provides more information as to the reason for the failure, such as out of disk space.
In a system with redundant servers, the snapshot files couldn't be copied to the backup server. Snapshot
replication is handled by a stored procedure run by SQL Server. It is also kicked off by snapshot update and
save operations.
This error can be caused by a disk space problem or by the fact that one of the servers in a redundant pair is
currently offline. The error is reported because the system is trying to backup the snapshot to the redundant
partner, and cannot find it. If the redundant partner is truly offline, then this error can be ignored.

Solution
Correct the problem specified by the system error, such as freeing up disk space.

3.40.74 10181
Snapshot version mismatch for <name>

Error ID
ERR_CL_SNAPSHOTVER

Error name
CL_SNAPSHOTVER

Cause
The snapshot file version does not match the version of the snapshot. The snapshot file version is 1 but may
change in future releases if the file format changes.

Solution
If a software upgrade has been performed, the snapshot files will need to be re-created.

950 www.honeywell.com
 3 ERROR CODES

3.40.75 10182
Snapshot <name> does not match current ER.

Error ID
ERR_CL_SNAPSHOTWRONGDB

Error name
CL_SNAPSHOTWRONGDB

Cause
The snapshot file was built from a different version of the database than the version currently in use.

Solution
If a software upgrade has been performed that changed the database revision, the snapshot files will need to be
re-created. When backing up the database, keep snapshot files and ERDB files together to ensure they are
restored as a set.

3.40.76 10183
Snapshot file <name> name does not match snapshot name <name>.

Error ID
ERR_CL_SNAPSHOTNAME

Error name
CL_SNAPSHOTNAME

Cause
The CPM name stored in the snapshot does not match the file name. The file may have been renamed.

Solution
Rename the file to the correct name and retry. If the controller has been renamed, the file will have to be re-
created.

3.40.77 10184
Module <name> was not found in snapshot.

Error ID
ERR_CL_NOTINSNAPSHOT

Error name
CL_NOTINSNAPSHOT

Cause
Modules (tagged blocks) were found in the database that are assigned to the CPM being loaded or saved, but are
not in the snapshot.

951
3 ERROR CODES

Solution
Blocks may have been added since snapshot was created. Reload blocks to controller or snapshot file to bring
up to date.

3.40.78 10185
Snapshot serialization error for <name>.

Error ID
ERR_CL_SNAPSHOTSERIALIZE

Error name
CL_SNAPSHOTSERIALIZE

Cause
A data error was encountered while reading the snapshot file.

Solution
Snapshot file appears to be corrupt. Re-create snapshot from loaded tab or from controller.

3.40.79 10186
Load from Monitor or Project tab may be necessary for <name>.

Error ID
ERR_CL_TRYLOADNOTSNAPSHOT

Error name
CL_TRYLOADNOTSNAPSHOT

Cause
A snapshot restore failed due to a controller resource problem.

Solution
Load the controller from the project or the loaded tab instead.

3.40.80 10187
SIMSTATE of CEE is not SIMFREEEZE.

Error ID
ERR_CL_SIMSTATENOTFREEZE

Error name
CL_SIMSTATENOTFREEZE

952 www.honeywell.com
 3 ERROR CODES

Cause
The block name in static snapshot and dynamic snapshot is the same. But IOC or EEC in these two snapshots
does not match.

Solution
Save the dynamic snapshot again to remove the wrong EEC or IOC in the dynamic snapshot and then perform
the restore.

3.40.81 10188
Same block name but wrong internal address.

Error ID
ERR_CL_WRONGINTERNALADDR

Error name
CL_WRONGINTERNALADDR

Cause
Dynamic or non-structural snapshot restore failed because incorrect EEC or IOC.

Solution
None.

3.40.82 10189
Controller changed Template Defined parameter.

Error ID
ERR_CL_CTLRCHGD_TMPLTDEFNDVAL

Error name
CL_CTLRCHGD_TMPLTDEFNDVAL

Cause
None.

Solution
None.

3.40.83 10190
Cannot change redundant partner.

Error ID
ERR_CL_NOTCHGPARTNER

953
3 ERROR CODES

Error name
CL_NOTCHGPARTNER

Cause
Once a secondary partner has been set for a CPM or RM, it cannot be changed.

Solution
Delete controller pair and re-create.

3.40.84 10191
Cannot perform operation on secondary.

Error ID
ERR_CL_NOTONSECDRY

Error name
CL_NOTONSECDRY

Cause
Control Builder or Import tool attempted to create a secondary partner for a secondary CPM or RM. This is an
abnormal situation and probably indicates a corrupted database or a software bug.

Solution
Recover database from backup. If this fails to correct the situation, notify TAC.

3.40.85 10192
Block is not a valid secondary.

Error ID
ERR_CL_NOTVALIDSECDRY

Error name
CL_NOTVALIDSEC

Cause
An attempt was made to make a block a redundant partner of the wrong type, or the block already has a partner.
This is an abnormal situation and probably indicates a corrupted database or a software bug.

Solution
Try to delete redundant pair and re-create, or recover database from backup. If this fails to correct the situation,
notify TAC.

3.40.86 10193
Communication Path is not set up for <name>

954 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_NOCOMMPATH

Error name
CL_NOCOMMPATH

Cause
Unable to locate the path to the Custom Communication DLL (CCD) for a Custom Control Library function.

Solution
Verify that CCD has been correctly installed.

3.40.87 10194
No redundant partner.

Error ID
ERR_CL_NOPARTNER

Error name
CL_NOPARTNER

Cause
1. The C300 may be redundant synchronized. But the MRT tool declares the controller to be non-redundant.
The Controller Migration wizard if called reports an error. This occurs because the secondary CPM is not
downloaded from the project to monitoring.
2. Unable to locate the redundant partner for a controller or RM. This is an abnormal situation and probably
indicates a corrupted database or a software bug.

Solution
1. Download the secondary CPM from the project.
2. Try to delete redundant pair and re-create, or recover database from backup. If this fails to correct the
situation, notify TAC.

3.40.88 10195
Block must be redundant.

Error ID
ERR_CL_NOTREDUNDANT

Error name
CL_NOTREDUN

Cause
A redundant partner may only be created for a primary controller or RM. This is an abnormal situation and
probably indicates a corrupted database or a software bug.

955
3 ERROR CODES

Solution
Try to delete redundant pair and re-create, or recover database from backup. If this fails to correct the situation,
notify TAC.

3.40.89 10196
Referenced block is missing <name>.

Error ID
ERR_CL_REFERENCED_BLOCK

Error name
CL_REFMISSING

Cause
None.

Solution
None.

3.40.90 10197
Referenced block <name> is not assigned.

Error ID
ERR_CL_REFERENCE_TO_UNASSIGNED

Error name
CL_REFUNASSIGNED

Cause
None.

Solution
None.

3.40.91 10198
Cannot load block with substituted connection.

Error ID
ERR_CL_CANT_LOAD_SUBST_NAME

Error name
None

956 www.honeywell.com
 3 ERROR CODES

Cause
One of the blocks being loaded has a substituted connection (that is, a connection using a substituted name) that
has not yet been resolved.

Solution
Either resolve the substituted connection or delete from block and load again.

3.40.92 10199
Substitute name has incorrect syntax.

Error ID
ERR_CL_BAD_SUBSTNAME_SYNTAX

Error name
None

Cause
User has entered a substituted name with incorrect syntax.

Solution
Enter a name with 2 to 64 characters, starting with '@', '_' and '%' as the only other special characters. Names
can be of the form '@xxx123.123' or '@xxx123'.

957
3 ERROR CODES

3.41 Codes 10200 to 10299

Related topics
“10200” on page 960
“10201” on page 960
“10202” on page 960
“10203” on page 961
“10204” on page 961
“10205” on page 961
“10206” on page 962
“10207” on page 962
“10208” on page 962
“10209” on page 963
“10210” on page 963
“10211” on page 963
“10212” on page 964
“10213” on page 964
“10214” on page 964
“10215” on page 965
“10216” on page 965
“10217” on page 966
“10218” on page 966
“10219” on page 966
“10220” on page 967
“10221” on page 967
“10222” on page 967
“10223” on page 968
“10224” on page 968
“10225” on page 968
“10226” on page 969
“10227” on page 969
“10228” on page 969
“10229” on page 970
“10230” on page 970
“10231” on page 970
“10232” on page 971
“10233” on page 971
“10234” on page 971
“10235” on page 972
“10236” on page 972
“10237” on page 972
“10238” on page 973
“10239” on page 973
“10240” on page 974
“10241” on page 974
“10242” on page 974
“10243” on page 975

958 www.honeywell.com
 3 ERROR CODES

“10244” on page 975

“10245” on page 975
“10246” on page 976
“10247” on page 976
“10248” on page 976
“10249” on page 977
“10250” on page 977
“10251” on page 977
“10252” on page 978
“10253” on page 978
“10254” on page 978
“10255” on page 979
“10256” on page 979
“10257” on page 979
“10258” on page 980
“10259” on page 980
“10260” on page 980
“10261” on page 981
“10262” on page 981
“10263” on page 981
“10264” on page 982
“10265” on page 982
“10266” on page 982
“10267” on page 983
“10268” on page 983
“10269” on page 983
“10270” on page 984
“10271” on page 984
“10272” on page 984
“10273” on page 985
“10274” on page 985
“10275” on page 985
“10276” on page 986
“10277” on page 986
“10278” on page 986
“10279” on page 987
“10280” on page 987
“10282” on page 987
“10283” on page 988
“10284” on page 988
“10285” on page 988
“10287” on page 989
“10288” on page 989
“10289” on page 990
“10290” on page 990
“10291” on page 990
“10292” on page 991
“10293” on page 991

959
3 ERROR CODES

“10294” on page 991

“10295” on page 992
“10296” on page 992
“10297” on page 992
“10298” on page 993
“10299” on page 993

3.41.1 10200
Duplicate substitute name.

Error ID
ERR_CL_DUPLICATE_SUBSTNAME

Error name
None

Cause
The substitute name entered by the user already exists.

Solution
Use a different name.

3.41.2 10201
Substitute name is currently used in a connection.

Error ID
ERR_CL_SUBSTNAME_HAS_CONNECTION

Error name
None

Cause
A substitute name that is currently in use in a connection cannot be deleted.

Solution
Delete the connection first, then delete the substitute name.

3.41.3 10202
Block 'name' failed validation.

Error ID
ERR_CL_INVALIDBASICBLOCK

Error name
CL_INVALIDBASICBLOCK

960 www.honeywell.com
 3 ERROR CODES

Cause
When chart is closed, a block was encountered which had failed form validation.

Solution
Open the configuration form for the block that failed and correct the problem. Most likely, an invalid parameter
was entered in a form and never corrected.

3.41.4 10203
Parameter 'name' has an invalid value.

Error ID
ERR_CL_INVALIDPARAM

Error name
CL_INVALIDPARAM

Cause
When validating a configuration form an invalid parameter value was encountered. The value may be out of
range, contain illegal characters, and so on.

Solution
Open the configuration form and correct the value.

3.41.5 10204
Parameter 'name' index of 'number' is out of range.

Error ID
ERR_CL_IDXOUTOFRANGE

Error name
CL_IDXOUTOFRANGE

Cause
A parameter index is out of the legal range.

Solution
Use correct index value.

3.41.6 10205
Entry for parameter 'name' out of range or has illegal characters.

Error ID
ERR_CL_ILLEGALPARMVAL

961
3 ERROR CODES

Error name
CL_ILLEGALPARMVAL

Cause
A value was entered that contained incorrect characters. For example, a letter as part of an integer value.

Solution
Fix the incorrect value.

3.41.7 10206
Parameter 'name' exceeded the maximum value allowed of 'value'.

Error ID
ERR_CL_PARMGTMAXRANGE

Error name
CL_PARMGTMAXRANGE

Cause
A numeric value was entered that exceeded the maximum specified in the database.

Solution
Fix the incorrect value.

3.41.8 10207
Parameter 'name' less than the minimum value allowed of 'value'

Error ID
ERR_CL_PARMLTMINRANGE

Error name
CL_PARMLTMINRANGE

Cause
A numeric value was entered that was less than the minimum specified in the database.

Solution
Fix the incorrect value.

3.41.9 10208
Parameter 'name' string exceeds maximum length, truncated to 'number' chars.

Error ID
ERR_CL_STRINGTOOLONG

962 www.honeywell.com
 3 ERROR CODES

Error name
CL_STRINGTOOLONG

Cause
A string value was entered that was longer than the maximum length specified in the database. The string will
be truncated to the maximum length.

Solution
Correct the string value.

3.41.10 10209
Parameter 'name' has an invalid enumeration ordinal.

Error ID
ERR_CL_INVALIDENUMORDINAL

Error name
CL_INVALIDENUMORDINAL

Cause
An enumeration parameter ordinal value was specified that is not within the range defined for the enumeration.

Solution
This should not occur. Contact Honeywell Technical Assistance Center (TAC).

3.41.11 10210
Parameter 'name' references a non-existent block.

Error ID
ERR_CL_BADREF

Error name
CL_BADREF

Cause
A block reference parameter references a non-existent block. For example, SCM SELHANDLER.

Solution
Block may have been deleted. Recover block and update reference, or edit parameter value to refer to the
correct block.

3.41.12 10211
Cannot locate block create validation function in DLL.

963
3 ERROR CODES

Error ID
ERR_CL_NOCREATEVFINDLL

Error name
CL_NOCREATEVFINDLL

Cause
Validation DLL has no entry point for assignment validation.

Solution
Probably a bad DLL.

3.41.13 10212
Cannot locate block validation function in DLL.

Error ID
ERR_CL_NOBLOCKVFINDLL

Error name
CL_NOBLOCKVFINDLL

Cause
Validation DLL has no entry point for assignment validation.

Solution
Probably a bad DLL.

3.41.14 10213
Cannot locate block assign validation function in DLL

Error ID
ERR_CL_NOASSIGNVFINDLL

Error name
CL_NOASSIGNVFINDLL

Cause
Validation DLL has no entry point for assignment validation.

Solution
Probably a bad DLL.

3.41.15 10214
Parameter ID does not exist in Block 'name'.

964 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_BAD_PARAM_ID

Error name
CL_BAD_PARAM_ID

Cause
A parameter ID was passed that when looked up, did not resolve to a known parameter.

Solution
The ERDB may be corrupted, or be the wrong version for this release. Contact Honeywell Technical Assistance
Center (TAC).

3.41.16 10215
Invalid name syntax.

Error ID
ERR_CL_NAME_SYNTAX

Error name
CL_NAME_SYNTAX

Cause
User used invalid name syntax. The only special character allowed is underbar '_'.
• Tag names can begin with either an alpha or numeric character.
• Basic block names must have at least one alpha character.

Solution
Correct the syntax and try again.

3.41.17 10216
Invalid name length.

Error ID
ERR_CL_NAME_LENGTH

Error name
CL_NAME_LENGTH

Cause
User entered a name that was too long.
• Tag names are 1 to 16 characters long.
• Basic block names are 1 to 15 characters long.

Solution
Shorten the name and try again.

965
3 ERROR CODES

3.41.18 10217
Duplicate Name.

Error ID
ERR_CL_DUPLICATE_NAME

Error name
CL_DUPLICATE_NAME

Cause
User entered a name of a block that already exists.

Solution
Enter a different name.

3.41.19 10218
Cannot change name of loaded block.

Error ID
ERR_CL_CANT_CHG_NAME_OF_LOADED

Error name
CL_LOADED_CANT_CHG_NAME

Cause
User tried to change the name of a block that was already loaded to a controller.

Solution
Delete the block from the controller first, and then rename it.

3.41.20 10219
Substitute name was not found.

Error ID
ERR_CL_SUBSTNAME_NOT_FOUND

Error name
CL_SUBSTNAMENOTFOUND

Cause
Client tried to look up a substitute name that doesn't exist.

966 www.honeywell.com
 3 ERROR CODES

Solution
If block containing missing substituted name was imported, verify that the correct substitute name source file
(global.snl) was imported as well. The name may be entered by editing the file and importing it using the
Import/Export tool 'IS' command; or enter manually in Control Builder.

3.41.21 10220
Substitute name does not exist.

Error ID
ERR_CL_SUBSTNAME_DOESNOTEXIST

Error name
CL_SUBSTNOTEXIST

Cause
Client tried to look up a substitute name that doesn't exist.

Solution
If block containing missing substituted name was imported, verify that the correct substitute name source file
(global.snl) was imported as well. The name may be entered by editing the file and importing it using the
Import/Export tool 'IS' command; or enter manually in Control Builder.

3.41.22 10221
Block delete action failed.

Error ID
ERR_CL_BlockDelete_FAILED

Error name
CL_BLOCKDELETEFAIL

Cause
None.

Solution
Try again. Inform Honeywell Technical Assistance Center (TAC) of error.

3.41.23 10222
Engineering Repository Database (ERDB) is invalid version.

Error ID
ERR_CL_ERDB_VERSION

Error name
CL_ERDBVERSION

967
3 ERROR CODES

Cause
None.

Solution
Inform Honeywell Technical Assistance Center (TAC) of error.

3.41.24 10223
Error Obtaining Parameter Minimum Value.

Error ID
ERR_CL_MINVAL

Error name
CL_MINVAL

Cause
None.

Solution
None.

3.41.25 10224
Error Obtaining Parameter Maximum Value.

Error ID
ERR_CL_MAXVAL

Error name
CL_MAXVAL

Cause
None.

Solution
None.

3.41.26 10225
Configuration cannot be saved because a database synchronization is in progress.

Error ID
ERR_CL_NOCOMMIT

Error name
CL_NOCOMMIT

968 www.honeywell.com
 3 ERROR CODES

Cause
ER synchronization is in progress, which makes it impossible to save changes to the database. Functionality is
limited during such a condition; no database changes allowed.

Solution
Wait for synchronization operation to complete and try again.

3.41.27 10226
Requested operation cannot continue because a database synchronization is in progress.

Error ID
ERR_CL_SYNCINPROGRESS

Error name
CL_SYNCINPROGRESS

Cause
ER synchronization is in progress, which makes it impossible to save changes to the database. Functionality is
limited during such a condition; no database changes allowed.

Solution
Wait for synchronization operation to complete and try again.

3.41.28 10227
Update to Project not supported for CPM, CEE and RM blocks. Other blocks will be updated as requested

Error ID
ERR_CL_CANT_UPDATE_CPM_CEE_RM

Error name
CL_CANTUPDATECPMCEERM

Cause
Certain ambiguities in the system design make it impossible to perform this operation currently.

Solution
None

3.41.29 10228
UCNOUT FB with REMCASTYPE of None is unexpected - the UCNOUT FB will do nothing during
execution

Error ID
ERR_CL_UCNOUT_CASTYPE_NONE

969
3 ERROR CODES

Error name
CL_CASTYPE_NONE

Cause
For configured REMCASTYPE, expected connections are not configured for SPPIN, RSPPIN, OPIN,
SECDATAIN, SPOUT, OPOUT, and MODEOUT parameters.

Solution
Either change REMCASTYPE to match the connections, or fix the connections to match REMCASTYPE

3.41.30 10229
Expected parameter connections are not configured for UCNOUT block configured for REMCASTYPE.

Error ID
ERR_CL_UCNOUT_CASTYPE_INCONSISTENT

Error name
CL_CASTYPE_INCONS

Cause
For configured REMCASTYPE, expected connections are not configured for SPPIN, RSPPIN, OPIN,
SECDATAIN, SPOUT, OPOUT, and MODEOUT parameters.

Solution
Either change REMCASTYPE to match the connections, or fix the connections to match REMCASTYPE

3.41.31 10230
Unexpected value of REMCASTYPE - the UCNOUT FB will do nothing during execution.

Error ID
ERR_CL_UCNOUT_CASTYPE_UNEXP

Error name
CL_CASTYPE_UNEXP

Cause
For configured REMCASTYPE, expected connections are not configured for SPPIN, RSPPIN, OPIN,
SECDATAIN, SPOUT, OPOUT, and MODEOUT parameters.

Solution
Either change REMCASTYPE to match the connections, or fix the connections to match REMCASTYPE.

3.41.32 10231
Illegal Primary IP address.

970 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_ILLEGAL_PRI_IP_ADDRESS

Error name
CL_ILLEGAL_PRI_IP

Cause
Value entered is not a legal IP address, could be a broadcast, multicast or loopback address.

Solution
Enter a valid unicast IP address.

3.41.33 10232
Illegal Secondary IP address.

Error ID
ERR_CL_ILLEGAL_SEC_IP_ADDRESS

Error name
CL_ILLEGAL_SEC_IP

Cause
Value entered is not a legal IP address, could be a broadcast, multicast or loopback address.

Solution
Enter a valid unicast IP address.

3.41.34 10233
Unable to resolve the Host Name.

Error ID
ERR_CL_UNRESOLVED_HOSTNAME

Error name
CL_UNRESOLVED_HOSTNAME

Cause
Host name entered is not in the Domain or Network may be down.

Solution
Enter a valid Host Name or check your Network Setup.

3.41.35 10234
Unable to resolve the IP Address.

971
3 ERROR CODES

Error ID
ERR_CL_UNRESOLVED_IPADDRESS

Error name
CL_UNRESOLVED_IPADDRESS

Cause
IP Address entered is not in the Domain or Network may be down.

Solution
Enter a valid IP Address or check your Network Setup.

3.41.36 10235
Connection not copied. Copy avoids making duplicate background connections.

Error ID
ERR_CL_DUP_BACKINIT_NOT_COPIED

Error name
CL_DUP_BACKINIT_NOT_COPIED

Cause
Connections are discarded if they duplicate backinit (or Hidden) connections.

Solution
None. Manually add a new connection after the copy has finished.

3.41.37 10236
Cannot change attribute of loaded block.

Error ID
ERR_CL_CANT_CHG_ATTR_OF_LOADED

Error name
CL_LOADED_CANT_CHG_ATTR

Cause
User tried to change the attribute of block that was loaded.

Solution
Delete block from monitor and try again.

3.41.38 10237
Cannot change attribute, name must be unique.

972 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_CANT_CHG_ATTR_NONUNIQUE_TAG

Error name
CL_NONUNIQUE_CANT_CHG_ATTR

Cause
User tried to change attribute of a block, name is not acceptable for new attribute.

Solution
Make block name unique and try again.

3.41.39 10238
Cannot change attribute for templates

Error ID
ERR_CL_CANT_CHG_ATTR_TEMPLATE

Error name
CL_TEMPLATE_CANT_CHG_ATTR

Cause
User tried to change attribute of a user defined template.

Solution
None

3.41.40 10239
Library Name. Exceeded the maximum length or the name syntax is incorrect

Error ID
ERR_CL_LIBNAME_INVALID

Error name
CL_LIBNAME_INVALID

Cause
User entered a name that was too long or User used invalid name syntax.
• library names are 50 characters long
• Only special character allowed in a library name is underbar '-'

Solution
Adjust the length of the library name to be less than 50 or remove the special character in name.

973
3 ERROR CODES

3.41.41 10240
Block name exceeded the maximum length or the name syntax is incorrect.

Error ID
ERR_CL_BLKNAME_INVALID

Error name
CL_BLKNAME_INVALID

Cause
A name is entered that was too long or invalid name syntax is used.
• Block names are 40 characters in length.
• Only special character allowed in a block name is underbar '-'.
• Block names must have atleast one alpha character.'

Solution
Adjust the length of the block name to be less than 40 or remove the special character in name.

3.41.42 10241
The new custom library name conflicts with an existing system library name.

Error ID
ERR_CL_LIBNAME_CONFLICT

Error name
CL_LIBNAME_CONFLICT

Cause
A name of a library is entered that already exists as a system, user, or vendor library.

Solution
Change the name and try again.

3.41.43 10242
The new block name already exists in the specified library

Error ID
ERR_CL_BLKNAME_CONFLICT

Error name
CL_LIBNAME_CONFLICT

Cause
User entered the name of a block that is not unique within the library

974 www.honeywell.com
 3 ERROR CODES

Solution
Change name and try again.

3.41.44 10243
Missing or Invalid FTE Bridge Name. Enter Non-redundant FTE Bridge.

Error ID
ERR_CL_UNRESOLVED_FTEBNAME

Error name
CL_UNRESOLVED_FTEBNAME

Cause
FTEB name entered is not in the Domain or Network or a redundant FTEB.

Solution
Enter a valid Non-Redundant FTEB name only.

3.41.45 10244
Missing or illegal IOM Slot, Uplink or Downlink address.

Error ID
ERR_CL_IOMCANTREADVALUE

Error name
CL_IOMCANTREADVALUE

Cause
IOM slot, uplink or downlink address is missing or illegal.

Solution
Enter a valid IOM slot, uplink or downlink address.

3.41.46 10245
Downlink CNI slot number may only be non-zero if MAC address is non-zero.

Error ID
ERR_CL_IOMINVREMOTECOMMPATH

Error name
CL_IOMINVREMOTECOMMPATH

Cause
Downlink CNI slot number may only be non-zero if MAC address is non-zero.

975
3 ERROR CODES

Solution
Enter consistent pair of downlink and uplink addresses.

3.41.47 10246
IOM slot number may only be zero if IOM is remote (MAC address is non-zero).

Error ID
ERR_CL_IOMINVSLOT

Error name
CL_IOMINVSLOT

Cause
IOM slot number may only be zero if IOM is remote (MAC address is non-zero)

Solution
Enter consistent pair of IOM slot and uplink addresses.

3.41.48 10247
Missing ASAPATH.

Error ID
ERR_CL_IOMNOASAPATH

Error name
CL_IOMNOASAPATH

Cause
The system failed to generate the ASAPATH.

Solution
None

3.41.49 10248
Only one C300 may access an FTE Bridge IO Manager at a time.

Error ID
ERR_CL_FTEB2_BUSY

Error name
CL_FTEB2_BUSY

Cause
Only one C300 may access an FTE Bridge IO Manager at a time.

976 www.honeywell.com
 3 ERROR CODES

Solution
Load the IOM to another FTEB2 that is available for that C300.

3.41.50 10249
The FTE Bridge needs to be loaded first.

Error ID
ERR_CL_FTEBNOTLOADED

Error name
CL_FTEBNOTLOADED

Cause
The FTE Bridge needs to be loaded first.

Solution
Load the FTE Bridge, and load the IOM afterwards.

3.41.51 10250
Value is out of range.

Error ID
ERR_CL_ILLEGALPARAMVAL

Error name
CL_ILLEGALPARAMVAL

Cause
Value entered is not in range.

Solution
Enter a valid value.

3.41.52 10251
Cannot change IOP Number of loaded block.

Error ID
ERR_CL_LOADED_CANT_CHANGE_DSA

Error name
CL_LOADED_CANT_CHANGE_DSA

Cause
IOP Number cannot be changed if the block is already loaded.

977
3 ERROR CODES

Solution
Delete block first and then change value.

3.41.53 10252
Error! Duplicate IOP Number exists on I/O Link.

Error ID
ERR_CL_ASSIGN_DUP_DSA

Error name
CL_ASSIGN_DUP_DSA

Cause
A block with the same IOP Number has already been assigned to this I/O Link block.

Solution
Change IOP Number.

3.41.54 10253
Maximum number of IOPs exceeded on I/O Link.

Error ID
ERR_CL_ASSIGN_MAX_IOPS_EXCEEDED

Error name
CL_ASSIGN_MAX_IOPS_EXCEEDED

Cause
The I/O Link already has the maximum number of blocks assigned to it.

Solution
Assign IOP to a different I/O Link.

3.41.55 10254
Failed to Load the IOP Configuration for block.

Error ID
ERR_CL_IOP_CONFIG_LOAD_FAIL

Error name
CL_IOP_CONFIG_LOAD_FAIL

Cause
Bad error.

978 www.honeywell.com
 3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.41.56 10255
Value not supported by associated IOP type.

Error ID
ERR_CL_IOP_VALUE_NOT_SUPPORTED

Error name
CL_IOP_VALUE_NOT_SUPPORTED

Cause
Illegal enumeration value entered.

Solution
Choose different value.

3.41.57 10256
Value not supported with configured Sensor Type.

Error ID
ERR_CL_PVCHAR_SENSRTYPE_MISMATCH

Error name
CL_PVCHAR_SENSRTYPE_MISMATCH

Cause
Illegal enumeration value entered.

Solution
Choose different value.

3.41.58 10257
Bad PMIO Channel block.

Error ID
ERR_CL_PMIO_INVALID_CHANNEL

Error name
CL_PMIO_INVALID_CHANNEL

Cause
BAD error.

979
3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.41.59 10258
Bad DO slot type for block.

Error ID
ERR_CL_PMIO_INVALID_DOSTYPE

Error name
CL_PMIO_INVALID_DOSTYPE

Cause
BAD error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.41.60 10259
Error! IOP A and B cannot have the same physical address.

Error ID
ERR_CL_IOP_PHYSADDR_MISMATCH

Error name
CL_IOP_PHYSADDR_MISMATCH

Cause
User entered the same File and Card numbers for both IOP A and B.

Solution
Choose different File and Card values.

3.41.61 10260
Associated IOP Type of the selected channel cannot be changed because the channel is assigned.

Error ID
ERR_CL_IOP_IOPTYPECHANGEFAIL

Error name
IOP_IOPTYPECHANGEFAIL

Cause
Channel block is assigned.

980 www.honeywell.com
 3 ERROR CODES

Solution
Unassign the channel block and try again.

3.41.62 10261
The selected parameter is read only and cannot be changed.

Error ID
ERR_CL_IOP_IOCPARAMREADONLY

Error name
CL_IOP_IOCPARAMREADONLY

Cause
None.

Solution
None

3.41.63 10262
Cannot change the configured HART device type of a loaded HART IOC block.

Error ID
ERR_CL_LOADED_CANNOT_CHANGE_DEVICE

Error name
CL_LOADED_CANNOT_CHANGE_DEVICE

Cause
The Configured HART Device cannot be changed if the IOC block is already loaded.

Solution
Delete block first and then change value.

3.41.64 10263
Value not supported with configured Fault Option.

Error ID
ERR_CL_FAULTOPT_DOTYPE_MISMATCH

Error name
CL_FAULTOPT_DOTYPE_MISMATCH

Cause
Illegal enumeration value entered.

981
3 ERROR CODES

Solution
Choose different value.

3.41.65 10264
IOLINK Type Change not allowed with assigned IOMs.

Error ID
ERR_CL_CANNOT_CHANGE_TYPE_IOMS_ASSIGNED

Error name
CL_CANNOT_CHANGE_TYPE_IOMS_ASSIGNED

Cause
IOLINK Type was changed with IOM's still assigned.

Solution
Delete or UnAssign all IOM's from the IOLINK in question.

3.41.66 10265
Cannot delete block with REDTAG enabled.

Error ID
ERR_CL_PMIO_REDTAG_SET

Error name
CL_PMIO_REDTAG_SET

Cause
Deleting a channel that has REDTAG set.

Solution
Clear REDTAG and then delete the channel.

3.41.67 10266
The FTE Bridge is not physically present

Error ID
ERR_CL_FTEBNOTTHERE

Error name
CL_FTEBNOTTHERE

Cause
The FTE Bridge needs to be physically present.

982 www.honeywell.com
 3 ERROR CODES

Solution
Configure the FTE Bridge, and load FTE Bridge and the IOM afterwards

3.41.68 10267
FTE Bridge cannot be deleted since IOMs are referring to it.

Error ID
ERR_CL_FTEB_REFERENCE

Error name
CL_FTEB_REFERENCE

Cause
The IOMs referring to the FTE Bridge need to be deleted or made not to refer to the FTE Bridge first.

Solution
Remove the reference(s) to the FTE Bridge and continue.

3.41.69 10268
Invalid IO Link type.

Error ID
ERR_CL_INVALID_IOLINK_TYPE

Error name
CL_INVALID_IOLINK_TYPE

Cause
The configured IO Link type does match the IOM being assigned or loaded.

Solution
Change and/or reload the IO Link with the correct type.

3.41.70 10269
IOMODULE should be in IDLE state.

Error ID
ERR_CHKPNT_IOMODULE_NOT_IDLE

Error name
CHKPNT_IOMODULE_NOT_IDLE

Cause
IOMSTATE must be IDLE for individual IOM checkpoint restore.

983
3 ERROR CODES

Solution
Change IOM state to IDLE.

3.41.71 10270
Internal Error: IOM checkpoint file corrupt.

Error ID
ERR_CHKPNT_IOMFILE_CORRUPTED

Error name
CHKPNT_IOMFILE_CORRUPTED

Cause
Checkpoint Save incorrect.

Solution
Reload IOM block or restore from different checkpoint file.

3.41.72 10271
INVALID IOMSTATE for Checkpoint Restore

Error ID
ERR_CHKPNT_IOMODULE_INVALID_STATE

Error name
CHKPNT_IOMODULE_INVALID_STATE

Cause
IOMSTATE must be IDLE or RUN for IOM checkpoint restore.

Solution
Restart IOM or Fix Communication errors.

3.41.73 10272
Internal error: Invalid checkpoint restore scope for IOM.

Error ID
ERR_CHKPNT_IOM_UNKNOWN_RESTORESCOPE

Error name
CHKPNT_IOM_UNKNOWN_RESTORESCOPE

Cause
Invalid checkpoint restore scope.

984 www.honeywell.com
 3 ERROR CODES

Solution
Fix restore Scope.

3.41.74 10273
Checkpoint File Incompatibility to Restore.

Error ID
ERR_CHKPNT_FILE_INCOMPATIBILITY

Error name
CHKPNT_FILE_INCOMPATIBILITY

Cause
InValid or Incompatible File for Checkpoint Restore.

Solution
Use Valid or Compatible File.

3.41.75 10274
Warning IOMODULE in Run. IOM Checkpoint not restored.

Error ID
WARNING_CHKPNT_IOMODULE_IN_RUN

Error name
CHKPNT_IOMODULE_IN_RUN

Cause
IOMODULE in Run during Checkpoint Restore.

Solution
Not Required. It's a Valid warning message during C300 and IOM Checkpoint restore Scenario.

3.41.76 10275
IO Channel PTEXECST Inactivation FAIL.

Error ID
ERR_CHKPNT_PTEXECST_WRITE_FAILED

Error name
CHKPNT_PTEXECST_WRITE_FAILED

Cause
Channel PTEXECST INACTIVE write FAIL.

985
3 ERROR CODES

Solution
Reload IOMODULE.

3.41.77 10276
Communication ERROR. IOMSTATE Read FAIL

Error ID
ERR_CHKPNT_IOMSTATE_READ_FAILED

Error name
CHKPNT_IOMSTATE_READ_FAILED

Cause
CDA Communication Error or IOLINK FAIL.

Solution
Fix Communication errors.

3.41.78 10277
Channel DOSTYPE WRITE FAIL.

Error ID
ERR_CHKPNT_DOSTYPE_WRITE_FAILED

Error name
CHKPNT_DOSTYPE_WRITE_FAILED

Cause
Invalid DOSTYPE value for Checkpoint Restore.

Solution
Reload Channel Block.

3.41.79 10278
Channel connection write error.

Error ID
ERR_CHKPNT_CONNECTION_WRITE_FAILED

Error name
CHKPNT_CONNECTION_WRITE_FAILED

Cause
DOSTYPE parameter not written or communication error for connection write.

986 www.honeywell.com
 3 ERROR CODES

Solution
Reload Channel Block parameters or Fix Communication error.

3.41.80 10279
Node not in Valid Save state.

Error ID
ERR_CHKPNT_NOT_SAVEABLE

Error name
CHKPNT_NOT_SAVEABLE

Cause
Attempting to save the node, but it's not accessible or is in a wrong state (such as being red on monitor tree).
Node is in failed state.

Solution
Ensure communication can be made with the node and that it the node is in an Idle or Run state.

3.41.81 10280
Database client errors

Error ID
ERR_ERCLI_ERROROFFSET

Error name
ERCLI_ERROROFFSET

Cause
None.

Solution
None.

3.41.82 10282
Database query execution error.

Error ID
ERR_ERCLI_QUERYEXEC

Error name
ERCLI_QUERYEXEC

987
3 ERROR CODES

Cause
An error was returned by the database query engine. For example, an attempt may have been made to update a
record in the database that does not exist.

Solution
The specific cause of the problem will be logged in the Experion PKS error log, preceding the log of this error.

3.41.83 10283
Database query fetch error.

Error ID
ERR_ERCLI_FETCH

Error name
ERCLI_FETCH

Cause
After a database query had been set up and executed, an attempt to fetch data from the database failed.

Solution
Additional information as to the specific cause of the problem may be logged in the Experion PKS error log,
preceding the log of this error.

3.41.84 10284
Database in use error.

Error ID
ERR_ERCLI_DBINUSE

Error name
ERCLI_DBINUSE

Cause
None.

Solution
None.

3.41.85 10285
Failed to create database query.

Error ID
ERR_ERCLI_QUERYCREATE

988 www.honeywell.com
 3 ERROR CODES

Error name
ERCLI_QUERYCREATE

Cause
The ER Server was unable to create a database query.

Solution
Additional information as to the specific cause of the problem may be logged in the Experion PKS error log,
preceding the log of this error.

3.41.86 10287
Failed to commit database transaction.

Error ID
ERR_ERCLI_COMMITTRAN

Error name
ERCLI_COMMITTRAN

Cause
The ER Server was unable to commit the current database transaction. Most likely this is a result of a failed
action query which was part of the transaction.

Solution
Additional information as to the specific cause of the problem may be logged in the Experion PKS error log,
preceding the log of this error.

3.41.87 10288
Failed to abort database transaction.

Error ID
ERR_ERCLI_ABORTTRAN

Error name
ERCLI_ABORTTRAN

Cause
The ER Server was unable to abort the current database transaction. Communication with the Server may have
been lost.

Solution
On the server machine, go to Start -> Settings -> Control Panel and verify that the Experion PKS ER Server
service is running. If the Control Builder and ER Server are on different machines, verify that there is a working
network path between the two machines.

989
3 ERROR CODES

3.41.88 10289
Timeout in communication with ER Server.

Error ID
ERR_ERCLI_TIMEOUT

Error name
ERCLI_TIMEOUT

Cause
The ER client lost communication with the ERDB server, resulting in a timeout.

Solution
On the server machine, go to Start -> Settings -> Control Panel and verify that the Experion PKS ER Server
service is running. If the Control Builder and ER Server are on different machines, verify that there is a working
network path between the two machines.

3.41.89 10290
Failed to connect to ER Server.

Error ID
ERR_ERCLI_LOGIN

Error name
ERCLI_LOGIN

Cause
The ER client was unable to connect to ER Server to login to the database.

Solution
On the server machine, go to Start -> Settings -> Control Panel and verify that the Experion PKS ER Server
service is running. If the Control Builder and ER Server are on different machines, verify that there is a working
network path between the two machines.

3.41.90 10291
User canceled (up)load operation.

Error ID
ERR_CL_CANCEL

Error name
CL_CANCEL

Cause
None.

990 www.honeywell.com
 3 ERROR CODES

Solution
None

3.41.91 10292
Write request Id invalid.

Error ID
ERR_ERCLI_REQID

Error name
ERCLI_REQID

Cause
None.

Solution
Workaround:

3.41.92 10293
Invalid Database Context for current db connection.

Error ID
ERR_ERCLI_INVALSWITCH

Error name
ERCLI_INVALSWITCH

Cause
None.

Solution
None.

3.41.93 10294
Specified block is not a valid insertion block.

Error ID
ERR_CL_NOTANINSERTIONBLOCK

Error name
ERR_CL_NOTANINSERTIONBLOCK

Cause
User entered the name of block that is not a valid insertion block.

991
3 ERROR CODES

Solution
Enter the name of a valid insertion block.

3.41.94 10295
An insertion block must be in the same Control Module as the master

Error ID
ERR_CL_NOTINSAMECM

Error name
CL_NOTINSAMECM

Cause
User entered the name of block that is not in the same Control Module.

Solution
Enter the name of a valid insertion block in the same Control Module.

3.41.95 10296
Specified insertion block was not found.

Error ID
ERR_CL_INSERTIONNOTFOUND

Error name
CL_INSERTIONNOTFOUND

Cause
User entered the name of block that wasn't found.

Solution
Enter the name of a valid insertion block.

3.41.96 10297
Specified insertion block is already configured

Error ID
ERR_CL_INSERTIONCONFIGURED

Error name
CL_INSERTIONCONFIGURED

Cause
User entered the name of CAB block that was configured by another block.

992 www.honeywell.com
 3 ERROR CODES

Solution
Enter the name of a valid not configured insertion block.

3.41.97 10298
A block configured for Distributed Execution cannot be an insertion block.

Error ID
ERR_CL_INSERTIONPROHIBITED

Error name
CL_INSERTIONPROHIBITED

Cause
User entered the name of CAB block that is configured for Distributed Execution

Solution
Enter the name of a valid insertion block not configured for Distributed Execution.

3.41.98 10299
This FTE Bridge operation is not supported by current revision of firmware.

Error ID
ERR_CL_FTEBOPNOTSUPPORTED

Error name
CL_FTEBOPNOTSUPPORTED

Cause
The FTE Bridge is older than R300 and does not support loading IOMs to a C300 controller.

Solution
Upgrade the firmware to the FTE Bridge and continue.

993
3 ERROR CODES

3.42 Codes 10300 to 10399

Related topics
“10300” on page 996
“10301” on page 996
“10302” on page 996
“10303” on page 997
“10304” on page 997
“10305” on page 997
“10306” on page 998
“10307” on page 998
“10308” on page 998
“10309” on page 999
“10312” on page 999
“10313” on page 1000
“10314” on page 1000
“10315” on page 1000
“10316” on page 1001
“10317” on page 1001
“10318” on page 1001
“10319” on page 1002
“10320” on page 1002
“10321” on page 1002
“10322” on page 1003
“10323” on page 1003
“10324” on page 1003
“10325” on page 1004
“10326” on page 1004
“10327” on page 1004
“10328” on page 1005
“10329” on page 1005
“10330” on page 1005
“10331” on page 1006
“10332” on page 1006
“10333” on page 1007
“10334” on page 1007
“10335” on page 1007
“10336” on page 1008
“10337” on page 1008
“10338” on page 1008
“10339” on page 1009
“10340” on page 1009
“10341” on page 1009
“10342” on page 1010
“10343” on page 1010
“10344” on page 1010
“10345” on page 1011

994 www.honeywell.com
 3 ERROR CODES

“10346” on page 1011

“10347” on page 1011
“10348” on page 1012
“10349” on page 1012
“10350” on page 1012
“10351” on page 1013
“10352” on page 1013
“10353” on page 1013
“10354” on page 1014
“10355” on page 1014
“10356” on page 1014
“10357” on page 1015
“10358” on page 1015
“10359” on page 1015
“10360” on page 1016
“10361” on page 1016
“10362” on page 1016
“10363” on page 1017
“10364” on page 1017
“10365” on page 1017
“10366” on page 1018
“10367” on page 1018
“10368” on page 1018
“10369” on page 1019
“10370” on page 1019
“10371” on page 1019
“10372” on page 1020
“10373” on page 1020
“10374” on page 1020
“10375” on page 1021
“10376” on page 1021
“10377” on page 1021
“10378” on page 1022
“10379” on page 1022
“10380” on page 1022
“10381” on page 1023
“10382” on page 1023
“10383” on page 1023
“10384” on page 1024
“10385” on page 1024
“10386” on page 1024
“10387” on page 1025
“10388” on page 1025
“10389” on page 1025
“10390” on page 1026
“10392” on page 1026
“10393” on page 1026
“10394” on page 1027

995
3 ERROR CODES

“10396” on page 1027

“10397” on page 1027
“10398” on page 1028
“10399” on page 1028

3.42.1 10300
Failed to copy back .snapshot or .att for node to its CPBASE, you must rebuild its checkpoint file.

Error ID
ERR_CL_CHKPT_BACKUP_FAILED_REBUILD_BASE

Error name
CHKPT_BACKUP_FAILED_REBUILD_BASE

Cause
Checkpoint save failed to copy back the critical .snapshot/.att files into CPBASE

Solution
User must rebuild node's checkpoint file (via control builder checkpoint-> rebuild).

3.42.2 10301
Warning - Not replicating CPBASE changes for node.

Error ID
ERR_CL_CHKPT_CPBASE_REPL_WARNING

Error name
CHKPT_CPBASE_REPL_WARNING

Cause
Load/Delete, or Checkpoint save/rebuild is not replicating the node's CPBASE. Cannot see other partner in
redundant server.

Solution
User must bring server pair back to full redundant operation.

3.42.3 10302
During checkpoint save launch, failed to acquire CPBASE snapshot file. Load, delete, upload or rebuild is in
progress. Save is aborted.

Error ID
ERR_CL_CHKPT_OPENSNAPSHOT_DURING_SAVE

Error name
CHKPT_OPENSNAPSHOT_DURING_SAVE

996 www.honeywell.com
 3 ERROR CODES

Cause
An auto or manual checkpoint save was launched while a load, delete, upload, or checkpoint rebuild was in
progress.

Solution
Wait until the load, delete, upload, or rebuild is finished before launching the save.

3.42.4 10303
The FTE Bridge device index should be between 1 and 99.

Error ID
ERR_CL_FTEBIDXOUTOFRANGE

Error name
CL_FTEBIDXOUTOFRANGE

Cause
The FTE Bridge index must be in range.

Solution
Enter a valid index to continue.

3.42.5 10304
The secondary FTE Bridge device index should be between 1 and 99.

Error ID
ERR_CL_FTEBSECIDXOUTOFRANGE

Error name
CL_FTEBSECIDXOUTOFRANGE

Cause
The secondary FTE Bridge index must be in range.

Solution
Enter a valid index to continue.

3.42.6 10305
DISOE cannot be configured to Normal or LowLatency mode, if Reporting Option of any of the channels is
configured SOE.

Error ID
ERR_CL_DISOE_DIMODE_EVTOPT_CONFIG

997
3 ERROR CODES

Error name
CL_DISOE_DIMODE_EVTOPT_CONFIG

Cause
On DISOE, DIMODE is configured to LowLatency mode and one of the channels EVTOPT is configured for
SOE.

Solution
Go to parent C-DISOE form and change DIMODE to SOE or Normal. Also check for all EVTOPT channels
which cannot be SOE.

3.42.7 10306
DISOE cannot be configured to SOE or LowLatency mode, if Open Wire Detection of any of the channels is
enabled.

Error ID
ERR_CL_DISOE_DIMODE_OWDENBL_CONFIG

Error name
CL_DISOE_DIMODE_OWDENBL_CONFIG

Cause
On DISOE channels OWDENBL is configured to ON.

Solution
Check channels where OWDENBL is set to ON.

3.42.8 10307
Open Wire Detection cannot be enabled if DISOE is configured to SOE or LowLatency mode.

Error ID
ERR_CL_DISOE_DIMODE_OWDENBL_CONFIG_CH

Error name
CL_DISOE_DIMODE_OWDENBL_CONFIG_CH

Cause
On DISOE, DIMODE is configured to SOE or LowLatency mode in which Open Wire Detection option is not
supported.

Solution
Go to parent C-DISOE form and change DIMODE to SOE or Normal if that is acceptable.

3.42.9 10308
Reporting Option cannot be changed to SOE, if DISOE is in either in Normal or LowLatency mode.

998 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_DISOE_DIMODE_EVTOPT_CONFIG_CH

Error name
CL_DISOE_DIMODE_EVTOPT_CONFIG_CH

Cause
On DISOE, DIMODE is configured to either Normal or LowLatency mode and the channel EVTOPT is being
changed to SOE.

Solution
Go to parent C-DISOE form and change DIMODE to SOE.

3.42.10 10309
Cannot perform operation with REDTAG enabled.

Error ID
ERR_CL_BLOCK_IS_REDTAGGED

Error name
CL_BLOCK_IS_REDTAGGED

Cause
Invalid operation when REDTAG parameter is enabled

Solution
Resolve Red Tag condition.

3.42.11 10312
Name conflicts with name of an existing parameter.

Error ID
ERR_CL_DUPLPARAMNAME

Error name
CL_DUPLPARAMNAME

Cause
Attempt to name a projected or alias parameter failed because there is already a parameter by that name. Names
of parameters must be unique within a container.

Solution
Choose another name that does not conflict and retry.

999
3 ERROR CODES

3.42.12 10313
Name conflicts with name of an existing block.

Error ID
ERR_CL_DUPLBLOCKNAME

Error name
CL_DUPLBLOCKNAME

Cause
Attempt to name a basic block, projected parameter or alias parameter failed because there is already a basic
block by that name. Names of basic blocks and parameters must be unique within a container.

Solution
Choose another name that does not conflict or rename existing basic block and retry.

3.42.13 10314
Name conflicts with name of an existing projected parameter.

Error ID
ERR_CL_DUPLPROJNAME

Error name
CL_DUPLPROJNAME

Cause
Attempt to name a parameter or basic block failed because there is already a projected parameter by that name.
Names of basic blocks and parameters must be unique within a container.

Solution
Choose another name that does not conflict or rename existing projected parameter and retry.

3.42.14 10315
Name conflicts with name of an existing alias.

Error ID
ERR_CL_DUPLALIASNAME

Error name
CL_DUPLALIASNAME

Cause
Attempt to name a parameter or basic block failed because there is already an alias parameter by that name.
Names of basic blocks and parameters must be unique within a container.

1000 www.honeywell.com
 3 ERROR CODES

Solution
Choose another name that does not conflict or rename existing alias parameter and retry.

3.42.15 10316
Name conflicts with name of an existing projected parameter.

Error ID
ERR_CL_DUPLNESTEDNAME

Error name
CL_DUPLNESTEDNAME

Cause
Attempt to name a basic block failed because there is already a nested parameter that starts with that name.

Solution
Choose another name that does not conflict and retry.

3.42.16 10317
Naming attempt failed because the name contains illegal characters. Illegal characters for block names are:

Error ID
ERR_CL_ILLEGALCHAR

Error name
CL_ILLEGALCHAR

Cause
Attempt to name a basic block failed because there is already a nested parameter that starts with that name.

Solution
Remove illegal character from name and retry.

3.42.17 10318
Name cannot be blank.

Error ID
ERR_CL_ZEROLENGTHNAME

Error name
CL_ZEROLENGTHNAME

Cause
Naming attempt failed because the name cannot be blank.

1001
3 ERROR CODES

Solution
Enter a valid name and retry.

3.42.18 10319
Alias name cannot exceed 32 characters.

Error ID
ERR_CL_ALIASINVALIDLENGTH

Error name
CL_ALIASINVALIDLENGTH

Cause
Naming attempt failed because the alias name was longer than 32 characters.

Solution
Enter a name of 32 characters or less and retry.

3.42.19 10320
Projected parameter name cannot exceed 54 characters.

Error ID
ERR_CL_PROJINVALIDLENGTH

Error name
CL_PROJINVALIDLENGTH

Cause
Naming attempt failed because the projected parameter name was longer than 54 characters.

Solution
Enter a name of 54 characters or less and retry.

3.42.20 10321
The origin parameter could not be found.

Error ID
ERR_CL_PROJORIGINNOTFOUND

Error name
CL_PROJORIGINNOTFOUND

Cause
A projected parameter failed to find it's assigned origin parameter. The origin parameter cannot be found in the
system.

1002 www.honeywell.com
 3 ERROR CODES

Solution
Verify existence of origin parameter and reassign projected parameter to a different origin, if existing origin has
been deleted or does not exist. If projected block is loaded, make sure origin block is also loaded.

3.42.21 10322
An unexpected operation was attempted on a projected parameter.

Error ID
ERR_CL_PROJUNEXPECTED

Error name
CL_PROJUNEXPECTED

Cause
An operation was attempted on a projected parameter that is not supported. Usually caused by attempting to
modify the value of a projected parameter directly instead of operating on its origin parameter value.

Solution
None. Cannot perform this operation on a projected parameter.

3.42.22 10323
Alias name conflicts with name of existing parameter. References to name will be resolved to alias. Renaming
of alias is strongly recommended!

Error ID
ERR_CL_DUPLALAISADDED

Error name
CL_DUPLALIASADDED

Cause
None.

Solution
Rename alias and retry.

3.42.23 10324
Projected Parameter name conflicts with name of existing parameter. References to name will be resolved to
projected parameter. Renaming of projected parameter is strongly recommended!

Error ID
ERR_CL_DUPLPROJADDED

Error name
CL_DUPLPROJADDED

1003
3 ERROR CODES

Cause
This warning can occur during migration if the user had an existing projected or alias parameter and a new
parameter was added by Honeywell to the same block where the user-named projected or alias parameter exists.
Subsequent references to this parameter name will be resolved to the user-named projected or alias parameter,
thus restricting or preventing references to the new Honeywell parameter on that block.

Solution
Rename the user-named projected or alias parameter to allow access to the new inherent parameter on that
block.

3.42.24 10325
Parameter NUMINSTANCES cannot be set lower than the value of parameter INSTSELECT.

Error ID
ERR_CL_BADNUMINSTANCES

Error name
CL_BADNUMINSTANCES

Cause
None.

Solution
Change value and retry.

3.42.25 10326
This change cannot be made because the limit of 4500 instance parameters (NUMALIASES x
NUMINSTANCES) would be exceeded.

Error ID
ERR_CL_MAXINSTEXCEEDED

Error name
CL_MAXINSTEXCEEDED

Cause
None.

Solution
Reduce the value of parameter NUMALIASES or parameter NUMINSTANCES

3.42.26 10327
An instance parameter cannot reference an alias parameter.

Error ID
ERR_CL_ALIASREFISALIAS

1004 www.honeywell.com
 3 ERROR CODES

Error name
CL_ALIASREFISALIAS

Cause
An attempt was made to enter a reference to an alias parameter as an instance in the alias table.

Solution
None. This configuration is not supported.

3.42.27 10328
The selected CM is configured to monitor this SCM. Blocks in the CM that are configured to track the SCM
will continue to track even if this instance is not selected.

Error ID
ERR_CL_ALIASCMISFIXED

Error name
CL_ALIASCMISFIXED

Cause
None.

Solution
None.

3.42.28 10329
The selected SCM's alias table contains references to this CM. Blocks in this CM that are configured to track
the SCM will continue to track even if they are not in the currently selected instance.

Error ID
ERR_CL_ALIASCMSETFIXED

Error name
CL_ALIASCMSETFIXED

Cause
None.

Solution
None.

3.42.29 10330
Contained by other parent.

1005
3 ERROR CODES

Error ID
PS_E_ERR_CL_CONTAINEDBYOTHERPARENT

Error name
CL_CONTAINEDBYOTHERPARENT

Cause
The block has a containment relationship with another block.

Solution
Remove the child block from the specified container.
If the connection is to an alias parameter, make sure reference is within owning container (that is, can only refer
to alias parameters by steps/transitions within the SCM on which the alias is defined).
The alias must belong to the owner of connection or its parent (that is, the containing SCM).

3.42.30 10331
Error in delete of item.

Error ID
ERR_CL_GENERICDELETEERROR

Error name
CL_GENERICDELETEERROR

Cause
Could not delete the first item because of the error to the right of the ':'. This is just a wrapper to identify the
error was caused by a delete operation.

Solution
Look at the error to the right of the ':'.

3.42.31 10332
Error on Delete of item: has child that is a tagged object.

Error ID
ERR_CL_HAS_CHILD

Error name
CL_HASCHILD2

Cause
Block has child, this may be one of many errors related to the first name error that was caused by a delete
operation.

Solution
Delete the children.

1006 www.honeywell.com
 3 ERROR CODES

3.42.32 10333
Cannot create child block of type on root.

Error ID
ERR_CL_NOBBONROOT

Error name
CL_NOBBONROOT

Cause
Incorrect relationship definition in def file.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.33 10334
Failed to Propagate Address Information.

Error ID
ERR_CL_FLD_PROPADDR1

Error name
CL_FLD_PROPADDR1

Cause
Block is probably locked, inserted string will identify which one.

Solution
Close chart or form of identified block.

3.42.34 10335
Failed to Propagate Address Information, Lock failed for block with Unknown error.

Error ID
ERR_CL_FLD_PROPADDR2

Error name
CL_FLD_PROPADDR2

Cause
Lock of identified block has failed, with an unknown error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

1007
3 ERROR CODES

3.42.35 10336
Failed to get interfaces needed for Load hook.

Error ID
ERR_CL_NOINTERFACEFORLOAD

Error name
CL_NOINTFORLOAD

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.36 10337
Failed to get interfaces needed for Post Load hook.

Error ID
ERR_CL_NOINTERFACEFORPOSTLOAD

Error name
CL_NOINTERFACEFORPOSTLOAD

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.37 10338
Failed to get interfaces needed for Assign hook.

Error ID
ERR_CL_NOINTERFACEFORASSIGN

Error name
CL_NOINTERFACEFORASSIGN

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

1008 www.honeywell.com
 3 ERROR CODES

3.42.38 10339
Failed to get interfaces needed for Unassign hook.

Error ID
ERR_CL_NOINTERFACEFORUNASSIGN

Error name
CL_NOINTERFACEFORUNASSIGN

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.39 10340
Failed to get interfaces needed for OnCreate hook.

Error ID
ERR_CL_NOINTERFACEFORCREATE

Error name
CL_NOINTERFACEFORCREATE

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.40 10341
Origin assignment failed.

Error ID
ERR_CL_PROJORIGINOBJTYPE

Error name
CL_PROJORIGINOBJTYPE

Cause
Object type of projected block does not match object type of origin block.

Solution
Inform Honeywell Technical Assistance Center (TAC) of error.

1009
3 ERROR CODES

3.42.41 10342
Load of Block Parent has failed, Load Canceled for the block.

Error ID
ERR_CL_ParentLoad_FAILED

Error name
CL_PARNTLDFAIL

Cause
If parent block failed load, no sense loading children.

Solution
Fix load of parent block and try again.

3.42.42 10343
Parent Block is not loaded, Load Canceled.

Error ID
ERR_CL_PARENTNOTLOADED

Error name
CL_PARENTNOTLOADED

Cause
If the parent block of the item has never been loaded, no sense loading any children.

Solution
Load parent block and try again.

3.42.43 10344
Block cannot be deleted independent of its parent block.

Error ID
ERR_CL_CANTDELETECHILD

Error name
CL_CANTDELETECHILD

Cause
A basic block was selected that can only be deleted by deleting its parent.

Solution
Delete parent block and try again.

1010 www.honeywell.com
 3 ERROR CODES

3.42.44 10345
Item cannot be deleted because it has been defined as part of a template.

Error ID
ERR_CL_CANTDEL_DEFINED

Error name
CL_CANTDEL_DEFINED

Cause
The item selected for deletion cannot be deleted because it has a template defined relationship with its container

Solution
Delete the item from the container template where it was defined. This will affect other templates and instances
derived from the template.

3.42.45 10346
None.

Error ID
ERR_CL_CANTDEL_FIXED

Error name
CL_CANTDEL_FIXED

Cause
None.

Solution
None.

3.42.46 10347
Item cannot be deleted because of previous errors related to children.

Error ID
ERR_CL_CANTDELETEFORCHILD

Error name
CL_CANTDELETEFORCHILD

Cause
This is a summary error for other errors.

1011
3 ERROR CODES

Solution
See other errors.

3.42.47 10348
Delete of Block has been cancelled because an associated block could not be deleted.

Error ID
ERR_CL_ChildDelete_FAILED

Error name
CL_CHLDDELFAIL

Cause
If child could not be deleted, no sense deleting the parent.

Solution
Fix delete of parent block.

3.42.48 10349
Failed to get interfaces needed for OnNameChange hook.

Error ID
ERR_CL_NOINTERFACEFORONNAMECHANGE

Error name
CL_NOINTERFACEFORNMECHNG

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.49 10350
Cannot drop onto container item because not handled by CL and no OnDrop hook supplied for the container.

Error ID
ERR_CL_ONDROPUNSUPCOMTTYPE

Error name
CL_ONDROPUNSUPCOMTTYPE

Cause
Implementation of container incomplete.

1012 www.honeywell.com
 3 ERROR CODES

Solution
Ondrop Hook for container template must be implemented.

3.42.50 10351
Cannot drop onto container item because not handled by CL and no OnDrop hook supplied for the container.

Error ID
ERR_CL_NODROPONMON

Error name
CL_ONDROPUNSUPCOMTTYPE

Cause
Implementation of container incomplete.

Solution
Ondrop Hook for container template must be implemented.

3.42.51 10352
Cannot drop block from the monitor tree.

Error ID
ERR_CL_NODROPFROMMON

Error name
CL_NODROPFROMMON

Cause
Function now allowed.

Solution
None

3.42.52 10353
Block may not be dropped on a CM.

Error ID
ERR_CL_INVBBFORCM

Error name
CL_INVBBFORCM

Cause
Either invalid operation, or OnDrop hook not implemented for the block.

1013
3 ERROR CODES

Solution
None (or need OnDrop hook implementation).

3.42.53 10354
Block may not be dropped on a SCM.

Error ID
ERR_CL_INVBBFORSCM

Error name
CL_INVBBFORSCM

Cause
Either invalid operation, or OnDrop hook not implemented for the block.

Solution
None (or need OnDrop hook implementation).

3.42.54 10355
Item is not a container. Blocks may not be dropped onto it.

Error ID
ERR_CL_CANTDROPNOTCOMP

Error name
CL_CANTDROPNOTCOMP

Cause
Function not allowed

Solution
None

3.42.55 10356
Item can only be dropped onto a container that is assigned to a CEE.

Error ID
ERR_CL_NODROPPSBBNOEE

Error name
CL_NODROPPSBBNOEE

Cause
Item is not assigned to a CEE. Function not allowed

1014 www.honeywell.com
 3 ERROR CODES

Solution
None

3.42.56 10357
Failed to get interfaces needed for OnDrop hook.

Error ID
ERR_CL_NOINTERFACEFORCANDROPBLOCK

Error name
CL_NOINTERFACEFORCANDROPBLOCK

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.57 10358
Cannot drop item onto a template.

Error ID
ERR_CL_NODROPSTRATONTMPL

Error name
CL_NODROPSTRATONTMPL

Cause
Function not allowed

Solution
None

3.42.58 10359
When dropping a block from one chart to another, both charts must be strategies, or both charts must be
templates.

Error ID
ERR_CL_NODROPNOMATCH

Error name
CL_NODROPNOMATCH

Cause
Function not allowed

1015
3 ERROR CODES

Solution
None

3.42.59 10360
When dropping a block from one chart to another, both charts must be strategies, or both charts must be
templates.

Error ID
ERR_CL_NODROPFROMSTRATONSTRAT

Error name
CL_NODROPFROMSTRATONSTRAT

Cause
Function not allowed

Solution
None

3.42.60 10361
Failed to get interfaces needed for OnAssignDoc hook.

Error ID
ERR_CL_NOINTERFACEFORASSIGNDOC

Error name
CL_NOINTASSIGNDOC

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.61 10362
Failed to get interfaces needed for DefineParameterExclusionMap hook.

Error ID
ERR_CL_NOINTERFACEFOREXCLUDEPARAM

Error name
CL_NOINTEXCLUDEPARAM

Cause
Bad error.

1016 www.honeywell.com
 3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.62 10363
Item contains a block that has not been assigned, Load Canceled.

Error ID
ERR_CL_BLKNOTASSGN

Error name
CL_BLKNOTASSGN

Cause
The basic block needs to be assigned to a device.

Solution
Assign the basic block to a device and try again.

3.42.63 10364
Item cannot be used until it has been contained by a CM.

Error ID
ERR_CL_BLKNOTAVAILABLE

Error name
CL_BLKNOTAVAILABLE

Cause
The basic block needs to be assigned to a device.

Solution
Drop the block into a container and try again.

3.42.64 10365
Item cannot be contained by a CM because it has a fixed relationship to its parent.

Error ID
ERR_CL_CMCONTFIXED

Error name
CL_CMCONTFIXED

Cause
An example of this is a Resource block (RB) or Transducer block (XB) or a fieldbus device.

1017
3 ERROR CODES

Solution
None

3.42.65 10366
Item cannot be contained by a CM because it is a tagged object.

Error ID
ERR_CL_CMCONTTAGGED

Error name
CL_CMCONTTAGGED

Cause
Function not allowed.

Solution
None

3.42.66 10367
Item cannot be dropped because it has a fixed relationship to its parent.

Error ID
ERR_CL_NODROPFIXED

Error name
CL_NODROPFIXED

Cause
An example of this is a Resource block (RB) or Transducer block (XB) or a fieldbus device.

Solution
None

3.42.67 10368
An invalid Graphical User Interface (GUI) control ID has been encountered.

Error ID
ERR_CL_INVALID_GUICTL

Error name
CL_INVALID_GUICTL

Cause
Somehow a GUI control ID associated with a Parameter cannot be found in the GUI control table.

1018 www.honeywell.com
 3 ERROR CODES

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.68 10369
Failed to allocate name for GUI Control ID.

Error ID
ERR_CL_ALLOCGUICTL

Error name
CL_ALLOCGUICTL

Cause
Out of memory.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.69 10370
Parameter does not exist on the selected block.

Error ID
ERR_CL_PARAMNOTEXIST

Error name
CL_PARAMNOTEXIST

Cause
As part of a parameter copy (or block assignment) operation, a parameter on the target was found that does not
exist on the destination.

Solution
If parameter is required, choose another destination.

3.42.70 10371
Data Type of Parameter does not match the selected block.

Error ID
ERR_CL_PARAMTYPEMISMATCH

Error name
CL_PARAMTYPEMISMATCH

1019
3 ERROR CODES

Cause
As part of a parameter copy (or block assignment) operation, a parameter on the target was found that does not
match the corresponding parameter on the destination.

Solution
If parameter is required, choose another destination.

3.42.71 10372
Parameter was used as a symbol attribute, but does not exist on the selected block.

Error ID
ERR_CL_NOPARAMFORSYMBOL

Error name
CL_NOPARAMFORSYMBOL

Cause
As part of a parameter copy (or block assignment) operation, parameter does not exist on the destination.

Solution
If parameter is required, choose another destination.

3.42.72 10373
Parameter was referenced in a connection, and the parameter does not exist on the selected block.

Error ID
ERR_CL_NOCONNPARAM

Error name
CL_NOCONNPARAM

Cause
As part of a parameter copy (or block assignment) operation, parameter does not exist on the destination.

Solution
If parameter is required, choose another destination.

3.42.73 10374
Failed to get interfaces needed for Get Blocks for Assignment hook.

Error ID
ERR_CL_NOINTFORGETBLKFORASN

Error name
CL_NOINTFORGETBLKFORASN

1020 www.honeywell.com
 3 ERROR CODES

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.74 10375
Failed to get interfaces needed for Check Block Transfer hook.

Error ID
ERR_CL_NOINTFORCKTRANS

Error name
CL_NOINTFORCKTRANS

Cause
Bad error.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.75 10376
The Selected block is not valid for assignment.

Error ID
ERR_CL_INVBLKFORASSIGN

Error name
CL_INVBLKFORASSIGN

Cause
The block probably is already in a container, but it could be the wrong type. This error should only happen on
import, and could happen if the CM is imported and the device was already imported and the block used.

Solution
Remove block from other container and try again.

3.42.76 10377
Operation failed because connections could not be processed.

Error ID
ERR_CL_TRNFRCHECKCON

Error name
CL_TRNFRCHECKCON

1021
3 ERROR CODES

Cause
Probably during a block assign or unassign or device replacement, the actual error is described at the end of the
string.

Solution
Review the actual error.

3.42.77 10378
Operation failed because connections owned by other blocks could not be processed.

Error ID
ERR_CL_TRNFRCKCONTOTHIS

Error name
CL_TRNFRCKCONTOTHIS

Cause
Probably during a block assign or unassign or device replacement, the actual error is described at the end of the
string

Solution
Review the actual error.

3.42.78 10379
Operation failed because connections owned by this block could not be processed.

Error ID
ERR_CL_TRNFRCKCONTHIS

Error name
CL_TRNFRCKCONTHIS

Cause
Probably during a block assign or unassign or device replacement, the actual error is described at the end of the
string.

Solution
Review the actual error. For a Function Block Convert operation, be sure you delete any connection to the listed
parameter reference in the existing control strategy. Delete the parameter connection and retry the Function
Block Convert operation.

3.42.79 10380
Update to Project had error on connection between item.

Error ID
ERR_CL_UPDCONNERR

1022 www.honeywell.com
 3 ERROR CODES

Error name
CL_UPDCONNERR

Cause
Occured during update to project during connection processing. The actual error is described at the end of the
string. The blocks that had errors will have change flags associated with them. Operation occured except for the
errors reported.

Solution
Fix the actual error.

3.42.80 10381
Update to Project for item failed.

Error ID
ERR_CL_UPDFAILED1

Error name
CL_UPDFAILED1

Cause
Occured during update to project during connection processing. The actual error is described at the end of the
string. Operation did not occur for this item.

Solution
Fix the actual error.

3.42.81 10382
Update to Project for item failed.

Error ID
ERR_CL_UPDFAILED2

Error name
CL_UPDFAILED2

Cause
Occured during update to project during connection processing. The actual error is described at the end of the
string. Only part of the operation occured for this item.

Solution
Fix the actual error and repeat the update for the item.

3.42.82 10383
Block has already been loaded as part of item. The block must be deleted from monitor before this load can
succeed. Load Canceled.

1023
3 ERROR CODES

Error ID
ERR_CL_BLOCKINOTHERCM

Error name
CL_BLOCKINOTHERCM

Cause
A block can only be loaded as part of one CM at a time.

Solution
Delete the CM from loaded and try again.

3.42.83 10384
Block is an ancestor of the selected CM. It may not be contained by the CM.

Error ID
ERR_CL_CANTCONTAINANCESTOR

Error name
CL_CANTCONTAINANCESTOR

Cause
The block is either the parent or the parent's parent. This is not allowed as it would cause a circular relationship.

Solution
Move the CM to a different parent that does not have the block as an ancestor.

3.42.84 10385
Cannot drop the block into the selected CM because this feature is not licensed.

Error ID
ERR_CL_NOEMBEDNOTLICENSED

Error name
CL_NOEMBEDNOTLICENSED

Cause
This should not occur.

Solution
None. Inform Honeywell Technical Assistance Center (TAC) of error.

3.42.85 10386
Block cannot be dropped in the selected CM because it is already contained by the CM.

1024 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_NOEMBEDSAMEPARENT

Error name
CL_NOEMBEDSAMEPARENT

Cause
None.

Solution
None.

3.42.86 10387
!!!WARNING!!!! You do not have the enough license for the ''feature. Check the License Display for further
information.

Error ID
ERR_CL_LIC_TEMP_PARAM_LMTEXCEEDED

Error name
CL_LIC_TEMP_PARAM_LMTEXCEEDED

Cause
There is no enough licenses for the selected feature.

Solution
Upgrade the License for the particular feature.

3.42.87 10388
Block cannot be copied because it contains CM/SCMs.

Error ID
ERR_CL_NOCOPYCMWITHEMBCM

Error name
CL_NOCOPYCMWITHEMBCM

Cause
Feature not supported yet.

Solution
None.

3.42.88 10389
Item cannot be loaded because it contains basic blocks. The CM must be assigned prior to load.

1025
3 ERROR CODES

Error ID
ERR_CL_HASBBASSIGNBEFORELOAD

Error name
CL_HASBBASSIGNBEFORELOAD

Cause
None.

Solution
None.

3.42.89 10390
Cannot change containment parent of item while it is loaded.

Error ID
ERR_CL_CANTDROPALRDYLOAD

Error name
CL_CANTDROPALRDYLOAD

Cause
None.

Solution
None.

3.42.90 10392
Block cannot be auto loaded because it is assigned.

Error ID
ERR_CL_PARNTNTLDASSGND

Error name
CL_PARNTNTLDASSGND

Cause
System attempting to auto load containment parent of a block, but the containment parent is assigned and must
be manually loaded by user.

Solution
Manually load the parent.

3.42.91 10393
Block cannot be dropped onto itself

1026 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_CANTDROPONSELF

Error name
CL_CANTDROPONSELF

Cause
Function not allowed.

Solution
None.

3.42.92 10394
Block cannot be assigned because is has been loaded in the Containment View.

Error ID
ERR_CL_NOASSIGNHIERARCHYLD

Error name
CL_NOASSIGNHIERARCHYLD

Cause
None.

Solution
None.

3.42.93 10396
Cannot assign to item because it is not compatible with the execution environment.

Error ID
ERR_CL_ASSIGN_NOTCOMPAT

Error name
CL_ASSIGN_BBNOTCOMPAT

Cause
The basic block cannot execute in the execution environment.

Solution
Delete the block from the CM or pick another execution environment.

3.42.94 10397
Cannot assign to item because it has OPC references, which are not supported by the execution environment.

1027
3 ERROR CODES

Error ID
ERR_CL_ASSIGN_OPCCONN

Error name
CL_ASSIGN_OPCCONN

Cause
The execution environment doesn't support opc references.

Solution
Delete the block from the CM or pick another execution environment.

3.42.95 10398
Cannot assign to item because it is not an execution environment or link.

Error ID
ERR_CL_INVASSIGNPARENT

Error name
CL_INVASSIGNPARENT

Cause
The assign to block should be an execution environment in this case.

Solution
Pick another assign to block.

3.42.96 10399
Control Builder License Limit has been exceeded.

Error ID
ERR_ERCLI_NOLICENSE

Error name
ERCLI_NOLICENSE

Cause
None.

Solution
None.

1028 www.honeywell.com
 3 ERROR CODES

3.43 Codes 10400 to 10496

Related topics
“10400” on page 1031
“10401” on page 1031
“10402” on page 1031
“10403” on page 1032
“10404” on page 1032
“10405” on page 1032
“10406” on page 1033
“10407” on page 1033
“10408” on page 1033
“10409” on page 1034
“10410” on page 1034
“10411” on page 1034
“10412” on page 1035
“10413” on page 1035
“10414” on page 1035
“10415” on page 1036
“10416” on page 1036
“10417” on page 1036
“10418” on page 1037
“10419” on page 1037
“10420” on page 1037
“10421” on page 1038
“10422” on page 1038
“10423” on page 1038
“10424” on page 1039
“10425” on page 1039
“10426” on page 1039
“10427” on page 1040
“10428” on page 1040
“10429” on page 1040
“10430” on page 1041
“10431” on page 1041
“10432” on page 1042
“10433” on page 1042
“10434” on page 1042
“10435” on page 1043
“10436” on page 1043
“10437” on page 1043
“10438” on page 1044
“10439” on page 1044
“10440” on page 1044
“10441” on page 1045
“10442” on page 1045
“10443” on page 1045

1029
3 ERROR CODES

“10444” on page 1046

“10445” on page 1046
“10446” on page 1046
“10447” on page 1047
“10448” on page 1047
“10449” on page 1047
“10450” on page 1048
“10451” on page 1048
“10452” on page 1048
“10453” on page 1049
“10454” on page 1049
“10455” on page 1049
“10456” on page 1050
“10457” on page 1050
“10458” on page 1050
“10459” on page 1051
“10460” on page 1051
“10461” on page 1051
“10462” on page 1052
“10463” on page 1052
“10464” on page 1052
“10465” on page 1053
“10466” on page 1053
“10467” on page 1053
“10468” on page 1054
“10469” on page 1054
“10470” on page 1054
“10471” on page 1055
“10472” on page 1055
“10473” on page 1055
“10474” on page 1056
“10475” on page 1056
“10476” on page 1056
“10477” on page 1057
“10478” on page 1057
“10479” on page 1058
“10480” on page 1058
“10481” on page 1059
“10482” on page 1059
“10483” on page 1059
“10484” on page 1060
“10485” on page 1060
“10486” on page 1060
“10487” on page 1061
“10490” on page 1061
“10491” on page 1061
“10492” on page 1062
“10493” on page 1062

1030 www.honeywell.com
 3 ERROR CODES

“10494” on page 1062

“10495” on page 1063
“10496” on page 1063

3.43.1 10400
Reference a non-existent parameter.

Error ID
ERR_CL_BADPARAMREF

Error name
CL_BADPARAMREF

Cause
None.

Solution
None

3.43.2 10401
Failed to initialize the License Details in control session.

Error ID
ERR_CL_LIC_INITLICFAILED

Error name
CL_LIC_INITLICFAILED

Cause
A failure occurred in accessing the License details from ERDB. Make sure that all the services are running.

Solution
None.

3.43.3 10402
Failed to get the License information for Non-Template Based Options.

Error ID
ERR_CL_LIC_GETNTEMPFAILED

Error name
CL_LIC_GETNTEMPFAILED

Cause
An unexpected exception occurred when trying to access License information for a Non-Template Based option.

1031
3 ERROR CODES

Solution
None.

3.43.4 10403
Failed to get the License information for Template Based Options.

Error ID
ERR_CL_LIC_GETTEMPFAILED

Error name
CL_LIC_GETTEMPFAILED

Cause
An unexpected exception occurred when trying to access License information for a Template based option.

Solution
None.

3.43.5 10404
License limit of Template Exceeded.

Error ID
ERR_CL_LIC_LMTEXCEEDED

Error name
CL_LIC_LMTEXCEEDED

Cause
The user has exceeded the amount of license purchased.

Solution
Upgrade the license for the particular option.

3.43.6 10405
None.

Error ID
Internal error only.

Error name
None.

Cause
None.

1032 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.7 10406
The Server returned more than the maximum of 25 rows allowed for History Configuration.

Error ID
ERR_CL_HIST_MAX_LIMIT_EXCEEDED

Error name
CL_HIST_MAX_LIMIT_EXCEEDED

Cause
This Error message is displayed if there are more rows for History Configuration in the CCA Server than the
maximum of 25 allowed.

Solution
The program will save the first 25 rows only. The rest would be discarded.

3.43.8 10407
The Server returned more than the maximum of 25 rows allowed for Trend Configuration

Error ID
ERR_CL_TREND_MAX_LIMIT_EXCEEDED

Error name
CL_TREND_MAX_LIMIT_EXCEEDED

Cause
This Error message is displayed if there are more rows for Trend Configuration in the CCA Server than the
maximum of 25 allowed.

Solution
The program will save the first 25 rows only. The rest would be discarded.

3.43.9 10408
The Server returned more than the maximum of 25 allowed for Group Configuration.

Error ID
ERR_CL_GROUP_MAX_LIMIT_EXCEEDED

Error name
CL_GROUP_MAX_LIMIT_EXCEEDED

1033
3 ERROR CODES

Cause
This error message is displayed if there are more rows for Group Configuration in the PS Server than the
maximum of 25 allowed.

Solution
The program will save the first 25 rows only. The rest would be discarded.

3.43.10 10409
Parameter value not stored.

Error ID
ERR_CL_PARAM_ASSIGN

Error name
CL_PARAM_ASSIGN

Cause
Error occurred during block assignment. The block assignment was completed, but the value was not stored.

Solution
None.

3.43.11 10410
Indicates that the license needs to be upgraded for the option for the load to succeed.

Error ID
ERR_CL_LIC_UPGRADELICENSE

Error name
CL_LIC_UPGRADELICENSE

Cause
There are not enough licenses for the selected feature.

Solution
Upgrade the license for the particular feature.

3.43.12 10411
With the newly defined absolute origin, the projected parameter cannot be exposed as a configuration parameter
on the block symbol.

Error ID
ERR_CL_ORIGIN_CONFLICT_CONFIGPARAM

1034 www.honeywell.com
 3 ERROR CODES

Error name
CL_ORIGIN_CONFLICT_CONFIGPARAM

Cause
The new origin does not have a load destination, therefore the projected parameter cannot be exposed for
configuration purpose on the block face.

Solution
Remove the projected parameter from the configuration block face first and try again.

3.43.13 10412
New origin is not an input and conflicts with the pin exposure for item on block.

Error ID
ERR_CL_ORIGIN_PIN_CONFLICT_INPUT

Error name
CL_ORIGIN_PIN_CONFLICT_INPUT

Cause
The origin parameter of a projected parameter conflicts with an existing input pin.

Solution
Remove conflicting pin from the control and try again.

3.43.14 10413
New origin is not an output and conflicts with the pin exposure for item on block.

Error ID
ERR_CL_ORIGIN_PIN_CONFLICT_OUTPUT

Error name
CL_ORIGIN_PIN_CONFLICT_OUTPUT

Cause
The origin parameter of a projected parameter conflicts with an existing output pin.

Solution
Remove conflicting pin from the control and try again.

3.43.15 10414
The origin parameter of item on block is already defined.

Error ID
ERR_CL_ORIGIN_ALREADY_DEFINED

1035
3 ERROR CODES

Error name
CL_ORIGIN_ALREADY_DEFINED

Cause
The origin parameter cannot be propagated because it would overwrite the origin on a derived template or
instance.

Solution
Undefine the conflicting origin parameter first and try again.

3.43.16 10415
The projected parameter is template defined.

Error ID
ERR_CL_PROJPARAM_IS_TEMPLATE_DEFINED

Error name
CL_PROJPARAM_IS_TEMPLATE_DEFINED

Cause
The operation cannot be executed successfully for template defined projected parameters.

Solution
None.

3.43.17 10416
Operation fails because the parameter is defined as origin for the projected parameter.

Error ID
ERR_CL_PARAMISORIGIN

Error name
CL_PARAMISORIGIN

Cause
The operation failed because the parameter is defined as an origin of a projected parameter.

Solution
Empty or redefine the origin of the conflicting projected parameter first and try again.

3.43.18 10417
Operation fails because item is defined as an origin block.

Error ID
ERR_CL_ORIGINBLOCK

1036 www.honeywell.com
 3 ERROR CODES

Error name
CL_ORIGINBLOCK

Cause
The selected block is defined as origin block, it cannot be deleted or uncontained.

Solution
Redefine (including empty) the origins of projected parameters defined using the selected block as the origin
block.

3.43.19 10418
Uncontain operation fails because item has connections.

Error ID
ERR_CL_BLOCKHASCONNECTIONS

Error name
CL_BLOCKHASCONNECTIONS

Cause
The selected block has connections to it. It Cannot be uncontained unless these connections are deleted.

Solution
Delete the connections to/from the selected block.

3.43.20 10419
Uncontain operation fails because item has been defined as part of a template.

Error ID
ERR_CL_BLOCKTEMPLATEDEFINED

Error name
CL_BLOCKTEMPLATEDEFINED

Cause
The selected block is defined as part of a template.

Solution
Make the selected block not part of its containment parent user template.

3.43.21 10420
The entered origin parameter is invalid.

Error ID
ERR_CL_INVALID_ORIGIN

1037
3 ERROR CODES

Error name
CL_INVALID_ORIGIN

Cause
The parameter cannot be used as an origin because it is not a parameter of the basic blocks or tagged blocks
contained by this CM.

Solution
Choose a parameter of the basic blocks or tagged blocks contained by this CM.

3.43.22 10421
The parameter item has connections.

Error ID
ERR_CL_PARAMHASCONNECTIONS

Error name
CL_PARAMHASCONNECTIONS

Cause
The operation failed because the parameter has connections.

Solution
Delete the conflicting connections first, then try again.

3.43.23 10422
Failed to Initialize the Version Control System (VCS).

Error ID
ERR_CL_VCS_INITFAILED

Error name
CL_VCS_INITFAILED

Cause
Failed to create VCS library object/ VCS library failed logon/other VCS library errors.

Solution
Register VCS Library Dll and try again.

3.43.24 10423
Invalid Version Control Session Object.

Error ID
ERR_CL_INVALID_VCSSESSIONPTR

1038 www.honeywell.com
 3 ERROR CODES

Error name
CL_INVALID_VCSSESSIONPTR

Cause
The VCS Session pointer in CL is invalid.

Solution
None.

3.43.25 10424
Invalid Version Control Session ID.

Error ID
ERR_CL_INVALID_VCSSESSIONID

Error name
CL_INVALID_VCSSESSIONID

Cause
The VCS Session ID in CL is invalid.

Solution
None.

3.43.26 10425
A user template from this source is not allowed.

Error ID
ERR_CL_NODROPFORTHISTEMP

Error name
CL_NODROPFORTHISTEMP

Cause
No User Templates allowed on this template.

Solution
None.

3.43.27 10426
Cannot drop item to its own derivation parent.

Error ID
ERR_CL_CANTDROP_ON_DERIV_PARENT

1039
3 ERROR CODES

Error name
CL_CANTDROP_ON_DERIV_PARENT

Cause
Dropping on to ones derivation parent is disallowed.

Solution
None.

3.43.28 10427
Cannot create a Circular Reference - Dropping of ones container to its own derivation parent or children is
disallowed.

Error ID
ERR_CL_CANTCREATE_CIRC_REFERNCE

Error name
CL_CANTCREATE_CIRC_REFERNCE

Cause
Dropping of ones container to its own derivation parent or children is disallowed

Solution
None.

3.43.29 10428
This system is not licensed to use signature message types.

Error ID
ERR_CL_SIGMSGTYPENOTLICENSED

Error name
SIGMSGTYPENOTLICENSED

Cause
User has selected one of the signature message types in the message block but the system is not licensed for
electronic signature use.

Solution
Upgrade the license.

3.43.30 10429
Load requires the Electronic Signature option license.

1040 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_CMLOADERRNOSIGMSGTYPELIC

Error name
CMLOADERRNOSIGMSGTYPELIC

Cause
User is trying to load a CM using signature message types in a message block but the system is not licensed for
electronic signature use.

Solution
Upgrade the license.

3.43.31 10430
This load will not allow acknowledgement of any Electronic Signature license option upgrades.

Error ID
ERR_CL_COMMITERRNOHAVESIGLICUPDATE

Error name
COMMITERRNOHAVESIGLICUPDATE

Cause
User has upgraded the license and is now trying to load from monitor. CommitTrans() has failed, since there is
no guarantee that the new value set to HAVESIGLIC will be acknowledged.

Solution
Re-Load from project to make sure that all Electronic Signature license changes are acknowledged.

3.43.32 10431
Cannot change ER while On-Process Migration (OPM) is enabled.

Error ID
ERR_CL_OPMENABLED

Error name
CL_OPMENABLED

Cause
User is in the middle of On-Process Migration, ER changes not allowed.

Solution
Complete the migration or fall back to the previous release.

1041
3 ERROR CODES

3.43.33 10432
Item is already contained by item.

Error ID
ERR_CL_CANTCONTAINAGAIN

Error name
CL_CANTCONTAINAGAIN

Cause
The selected tagged block has already been contained by the destination container.

Solution
None.

3.43.34 10433
Block must be selected for the same operation. If block is not loaded, load it first and try again.

Error ID
ERR_CL_UPDBOCKSELECTION

Error name
CL_UPDBOCKSELECTION

Cause
Occured in a pre check phase of update to project. Connections where found where the owning end is outside
the scope but the passive end is inside the scope of the operation.

Solution
Include the blocks shown in the error message into the selection list and try again.

3.43.35 10434
Cannot find firmware information.

Error ID
ERR_CL_NOFIRMWAREMATCH

Error name
CL_NOFIRMWAREMATCH

Cause
Developer or Installation error, ver_rev.txt file not correct.

1042 www.honeywell.com
 3 ERROR CODES

Solution
Contact Technical Assistance.

3.43.36 10435
Is not a valid internal library name.

Error ID
ERR_CL_INVALIDINTLIBNAME

Error name
CL_INVALIDINTLIBNAME

Cause
The name is not a library in the ERDB.

Solution
None.

3.43.37 10436
Invalid block type.

Error ID
ERR_CL_INVALID_CLSCATEGORY

Error name
CL_INVALID_CLSCATEGORY

Cause
None.

Solution
None.

3.43.38 10437
Invalid Help ID format.

Error ID
ERR_CL_INVALID_HLPIDFMT

Error name
CL_INVALID_HLPIDFMT

Cause
None.

1043
3 ERROR CODES

Solution
None.

3.43.39 10438
Duplicate Help ID.

Error ID
ERR_CL_DUP_HLPID

Error name
CL_DUP_HLPID

Cause
None.

Solution
None.

3.43.40 10439
Duplicate Parameter Group.

Error ID
ERR_CL_DUPLPARAMGROUP

Error name
CL_DUPLPARAMGROUP

Cause
None.

Solution
None.

3.43.41 10440
No Group number defined.

Error ID
ERR_CL_GRPNUMNOTDEF

Error name
CL_GRPNUMNOTDEF

Cause
None.

1044 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.42 10441
Attribute specified, but no parent group.

Error ID
ERR_CL_ATTRGRPNUM

Error name
CL_ATTRGRPNUM

Cause
None.

Solution
None.

3.43.43 10442
No Group Name specified.

Error ID
ERR_CL_NOGRPNAME

Error name
CL_ATTRGRPNUM

Cause
None.

Solution
None.

3.43.44 10443
Generic Block Type Specified was not found in the ERDB.

Error ID
ERR_CL_INVGENERICID

Error name
CL_INVGENERICID

Cause
None.

1045
3 ERROR CODES

Solution
None.

3.43.45 10444
Parameter Type for named Parameter may not be modified as it has instances derived from it.

Error ID
ERR_CL_PARAMDATATYPECHANGE

Error name
CL_PARAMDATATYPECHANGE

Cause
None.

Solution
None.

3.43.46 10445
Generic Block Type Name not found in ERDB.

Error ID
ERR_CL_INVGENBT

Error name
CL_INVGENBT

Cause
None.

Solution
None.

3.43.47 10446
Invalid Relationship Parent specified.

Error ID
ERR_CL_INVRELPARENT

Error name
CL_INVRELPARENT

Cause
None.

1046 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.48 10447
Invalid XML Filename. File not found.

Error ID
ERR_CL_INVXMLFILENAME

Error name
CL_INVXMLFILENAME

Cause
None.

Solution
None.

3.43.49 10448
Invalid Library Type.

Error ID
ERR_CL_INVLIBTYPE

Error name
CL_INVLIBTYPE

Cause
None.

Solution
None.

3.43.50 10449
Symbol name already exists.

Error ID
ERR_CL_SYM_DUPLICATENAME

Error name
CL_SYM_DUPLICATENAME

Cause
None.

1047
3 ERROR CODES

Solution
Rename symbol and try again.

3.43.51 10450
Cannot delete because symbol is referenced.

Error ID
ERR_CL_SYM_CANNOTDELETE

Error name
CL_SYM_CANNOTDELETE

Cause
None.

Solution
Remove symbol reference and try again.

3.43.52 10451
Cannot reload a system library symbol.

Error ID
ERR_CL_SYM_NOSYSRELOAD

Error name
CL_SYM_NOSYSRELOAD

Cause
None.

Solution
None.

3.43.53 10452
Cannot delete a system library symbol.

Error ID
ERR_CL_SYM_NOSYSDELETE

Error name
CL_SYM_NOSYSDELETE

Cause
None.

1048 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.54 10453
Specified image file is not a valid format.

Error ID
ERR_CL_SYM_INVALIDIMAGE

Error name
CL_SYM_INVALIDIMAGE

Cause
None.

Solution
None.

3.43.55 10454
Specified symbol does not exist.

Error ID
ERR_CL_SYM_NOSYMBOL

Error name
CL_SYM_NOSYMBOL

Cause
None.

Solution
None.

3.43.56 10455
No name was provided for library/symbol.

Error ID
ERR_CL_SYM_NAMEBLANK

Error name
CL_SYM_NAMEBLANK

Cause
None.

1049
3 ERROR CODES

Solution
None.

3.43.57 10456
Library/symbol name is too long.

Error ID
ERR_CL_SYM_NAMETOOLONG

Error name
CL_SYM_NAMETOOLONG

Cause
None.

Solution
Rename symbol and try again.

3.43.58 10457
Library/Symbol name contains illegal characters.

Error ID
ERR_CL_SYM_NAMEINVALID

Error name
CL_SYM_NAMEINVALID

Cause
None.

Solution
Rename symbol and try again.

3.43.59 10458
No layout is loaded.

Error ID
ERR_CL_LAYOUT_NOLAYOUT

Error name
CL_LAYOUT_NOLAYOUT

Cause
None.

1050 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.60 10459
Layout is read only.

Error ID
ERR_CL_LAYOUT_READONLY

Error name
CL_LAYOUT_READONLY

Cause
None.

Solution
None.

3.43.61 10460
No layout name was provided.

Error ID
ERR_CL_LAYOUT_NONAME

Error name
CL_LAYOUT_NONAME

Cause
None.

Solution
None.

3.43.62 10461
Current layout is locked; new layout cannot be loaded.

Error ID
ERR_CL_LAYOUT_NOLOAD

Error name
CL_LAYOUT_NOLOAD

Cause
None.

1051
3 ERROR CODES

Solution
None.

3.43.63 10462
Specified element count does not match defined element count.

Error ID
ERR_CL_LAYOUT_BADCOUNT

Error name
CL_LAYOUT_BADCOUNT

Cause
None.

Solution
None.

3.43.64 10463
Specified image file is not a valid format.

Error ID
ERR_CL_LAYOUT_INVALIDIMAGE

Error name
CL_LAYOUT_INVALIDIMAGE

Cause
None.

Solution
None.

3.43.65 10464
Invaild library ID.

Error ID
ERR_CL_INVALLIBID

Error name
CL_INVALLIBID

Cause
None.

1052 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.43.66 10465
Illegal Device Index.

Error ID
ERR_CL_DUPLICATE_DEVICE_INDEX

Error name
CL_DUPLICATE_DEVICE_INDEX

Cause
Value entered is not a legal Device Index. It is already configured.

Solution
Enter a valid Device Index.

3.43.67 10466
Cannot assign this CM to GEE because CM contains either non-FFB blocks/connections or nested tagged items
other than CMs.

Error ID
ERR_CL_CANNOT_ASSIGN_NONFFB_CM

Error name
CL_CANNOT_ASSIGN_NONFFB_CM

Cause
GEE does not support CMs having basic blocks which are not FFB types nor supports a CM which is nesting
other tagged items other than CMs.

Solution
Delete the non-FFB blocks & connections from the CM and try to reassign, or delete the tagged items being
nested which are not CMs.

3.43.68 10467
Cannot assign DFB to GEE because DFB being assigned is using hiway box # of an already assigned DFB.

Error ID
ERR_CL_CANNOT_ASSIGN_DFB_DUPLICATE_BOX

Error name
CL_CANNOT_ASSIGN_DFB_DUPLICATE_BOX

1053
3 ERROR CODES

Cause
The DFB being assigned is using the same hiway box number of a DFB that is already assigned to the GEE.

Solution
Change the hiway box number in the DFB being assigned to a box number (5-63) that is not yet used by any
assigned DFB. The hardware strapped box number (in the actual hiway box) must match that being chosen.

3.43.69 10468
Cannot assign a FFB to a CM since already in a CM

Error ID
ERR_CL_FFB_ALREADY_IN_A_CM

Error name
CL_FFB_ALREADY_IN_A_CM

Cause
The FFB is being dropped into a CM; but it already exists in another CM.

Solution
Must first delete from FFB containing CM before attempting to drop into another CM.

3.43.70 10469
Cannot drop fixed relationship FFBs into DFB parents.

Error ID
ERR_CL_FFB_RELATIONSHIP_DOES_NOT_PERMIT_DROP

Error name
CL_FFB_RELATIONSHIP_DOES_NOT_PERMIT_DROP

Cause
A FFB that is already assigned to a DFB parent on a fixed assignment basis is trying to be dropped into another
DFB parent.

Solution
Operation is not permitted. Only dynamic relationship FFB children are permitted to be dropped into
compatible DFB parents.

3.43.71 10470
Attempting to drop an incompatible child FFB into a parent DFB.

Error ID
ERR_CL_FFB_NOT_COMPATIBLE_WITH_DFB

1054 www.honeywell.com
 3 ERROR CODES

Error name
CL_FFB_NOT_COMPATIBLE_WITH_DFB

Cause
Although the FFB being dropped is of a dynamic relationship type, it is incompatible with the DFB parent.

Solution
Drop the FFB into a compatible DFB.

3.43.72 10471
Cannot drop an implemented FFB strategy into a DFB.

Error ID
ERR_CL_FFB_STRATEGIES_CANNOT_BE_DROPPED_INTO_DFB

Error name
CL_FFB_STRATEGIES_CANNOT_BE_DROPPED_INTO_DFB

Cause
Attempting to drop an implemented FFB strategy into a DFB.

Solution
Only FFB templates are permitted to be dropped into a DFB. If an implemented FFB is to be associated with a
DFB parent then it must be done through the assignment operation.

3.43.73 10472
Cannot drop CM because it has a parent CM in another GEE.

Error ID
ERR_CL_CM_HAS_CM_PARENT_IN_OTHER_GEE

Error name
CL_CM_HAS_CM_PARENT_IN_OTHER_GEE

Cause
CM cannot be dropped into a GEE since it has a CM parent located in a different GEE.

Solution
Either unassign the associated CMs or rethink what you are doing with the CM containment.

3.43.74 10473
Cannot drop DFB because its children FFBs have CM parents in other GEE(s).

Error ID
ERR_CL_CM_HAS_CM_CHILD_IN_OTHER_GEE

1055
3 ERROR CODES

Error name
CL_CM_HAS_CM_CHILD_IN_OTHER_GEE

Cause
CM cannot be dropped into a GEE since it has contained CM children in other GEE(s).

Solution
Either unassign the associated CMs or rethink what you are doing with the CM containment.

3.43.75 10474
Cannot drop CM because its child FFBs have DFB parents in other GEE(s).

Error ID
ERR_CL_CM_FFBS_HAVE_DFB_PARENTS_IN_OTHER_
GEES

Error name
CL_CM_FFBS_HAVE_DFB_PARENTS_IN_OTHER_GEES

Cause
CM cannot be dropped into a GEE since its FFBs are in DFBs that are in other GEE(s)

Solution
Either unassign the associated DFBs or rethink what you are doing with the CM containment.

3.43.76 10475
Cannot drop DFB because its child FFBs have CM parents in other GEE(s).

Error ID
ERR_CL_DFB_HAS_FFB_HAVING_CM_OR_CHILD_CM_IN_OTHER_GEE

Error name
CL_DFB_HAS_FFB_HAVING_CM_OR_CHILD_CM_IN_OTHER_GEE

Cause
DFB cannot be dropped into a GEE since its FFBs are in a CM where that CM or its contained CMs are in other
GEE(s).

Solution
Either unassign the associated CMs or rethink what you are doing with the CM containment.

3.43.77 10476
Cannot move CM or DFB directly from one GEE into another GEE, the CM or DFB is unassigned from present
GEE.

1056 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_MUST_UNASSIGN_BEFORE_MOVING_TO_
OTHER_GEE

Error name
CL_MUST_UNASSIGN_BEFORE_MOVING_TO_OTHER_
GEE

Cause
DFB/CM cannot be dropped directly from one GEE into another GEE.

Solution
The CM or DFB must first be unassigned from the existing GEE, and then it can before dropped into other
GEE. The unassignment has occurred.

3.43.78 10477
Cannot assign Even numbers to DEVICEINDX parameter of Primary EHG

Error ID
ERR_CL_EVEN_EHGDEVICE_INDEX

Error name
CL_EVEN_EHGDEVICE_INDEX

Cause
Trying to assign Even numbers to EHG DEVICEIDX parameter

Solution
Give odd numbers to EHG device index parameter

3.43.79 10478
Cannot assign duplicate Device Index to EHG

Error ID
ERR_CL_DUPLICATE_EHGDEVICE_INDEX

Error name
CL_DUPLICATE_EHGDEVICE_INDEX

Cause
The device index given to EHG module is not free, and being used by some other modules like FTEB.

Solution
Provide any device index which is free in the FTEB network family.

1057
3 ERROR CODES

3.43.80 10479
Primary EHG module must be loaded before the Secondary EHG module

Error ID
ERR_CL_EHG_PRIMARY_NOTLOADED

Error name
CL_EHG_PRIMARY_NOTLOADED

Cause
Before loading the secondary module, User has to load primary EHG module

Solution
Load primary module and then try loading secondary EHG module.

3.43.81 10480
EHG Node index cannot be more than 512. Provide a device index which is less than 512.

Error ID
ERR_CL_EHG_HIGH_DEVICEINDEX

Error name
ERR_CL_EHG_HIGH_DEVICEINDEX

Cause
EHG Node cannot have a device index which is greater than 512 in number.

Solution
User has to give a valid device index which is less than 512 during creation of EHG FFB.

3.43.82 10480
EHG Node index cannot be more than 512. Provide a device index which is less than 512.

Error ID
ERR_CL_EHG_HIGH_DEVICEINDEX

Error name
ERR_CL_EHG_HIGH_DEVICEINDEX

Cause
EHG Node cannot have a device index which is greater than 512 in number.

Solution
User has to give a valid device index which is less than 512 during creation of EHG FFB.

1058 www.honeywell.com
 3 ERROR CODES

3.43.83 10481
Cannot enable simulation when EHG Secondary is present in Monitoring View

Error ID
ERR_CL_EHG_SECONDARY_LOADED

Error name
CL_EHG_SECONDARY_LOADED

Cause
Trying to click the SIMENABLE checkbox on config form when EHG Secondary is still present in monitoring
view.

Solution
Delete Secondary module and try again.

3.43.84 10482
Cannot load secondary when Primary EHG module is loaded in Simulation mode

Error ID
ERR_CL_EHG_SIM_LOADED

Error name
CL_EHG_SIM_LOADED

Cause
Primary was loaded when SIENABLE is TRUE. Then SIMENABLE is set to FALSE and Secondary is loaded.

Solution
Delete Primary module from monitoring view, and try again.

3.43.85 10483
This Box number is already in use on this Hiway

Error ID
ERR_CL_EHG_DUPLICATE_BOXNUM

Error name
CL_EHG_DUPLICATE_BOXNUM

Cause
User is trying to give a Box number to EHG/DFB which is already in use either by EHG/DFB on the same
Hiway.

1059
3 ERROR CODES

Solution
Give another valid box number to EHG/DFB

3.43.86 10484
This operation is not possible because the extended box number is already in use on this Hiway.

Error ID
ERR_CL_EHG_CHANGE_BOXSIZE

Error name
CL_EHG_CHANGE_BOXSIZE

Cause
User is trying to change the size of a DFB from regular to extended, the extended box number is being used by
either EHG/DFB of the same Hiway

Solution
Make the Hiway configuration proper by looking all EHG/DFB box numbers on the same Hiway.

3.43.87 10485
Primary EHG Node IP Address cannot be more than 253.

Error ID
ERR_CL_EHG_PRI_HIGH_IP_ADDRESS

Error name
SCL_EHG_PRI_HIGH_IP_ADDRESShort Name:

Cause
Primary EHG Node cannot have IP Address which is greater than 253 in number.

Solution
User has to give a valid IP Address which is less than or equal to 253 during creation of EHG FFB.

3.43.88 10486
Cannot assign Odd IP Address to Secondary EHG Node.

Error ID
ERR_CL_EHG_SEC_ODD_IP_ADDRESS

Error name
CL_EHG_SEC_ODD_IP_ADDRESS

Cause
Trying to assign Odd numbers to Secondary EHG IPADDRESS parameter.

1060 www.honeywell.com
 3 ERROR CODES

Solution
Give Even number to EHG IPADDRESS parameter.

3.43.89 10487
Cannot assign duplicate IP Address to EHG

Error ID
ERR_CL_EHG_DUPLICATE_IP_ADDRESS

Error name
CL_EHG_DUPLICATE_IP_ADDRESS

Cause
The IP Address given to EHG module is not free, and being used by some other modules like FTEB.

Solution
Provide any IP Address which is free in the FTEB network family.

3.43.90 10490
Cannot delete parameters while instances exist

Error ID
ERR_CL_PARAMDEL_WHILEINSTANCESEXIST

Error name
PARAMDEL_WHILEINSTANCESEXIST

Cause
You have monitor or project side instances and you have tried to delete a parameter.

Solution
Delete Project and Monitor Side instance.

3.43.91 10491
Cannot delete parameters while user templates exist

Error ID
ERR_CL_PARAMDEL_WHILETEMPLATESEXIST

Error name
PARAMDEL_WHILETEMPLATESEXIST

Cause
You have user derived templates and you have tried to delete a parameter

1061
3 ERROR CODES

Solution
Delete Derived user templates

3.43.92 10492
The version of the function does not support multiple parents. Contact TAC.

Error ID
ERR_CL_FCNNOTFORMULTI

Error name
CL_FCNNOTFORMULTI

Cause
Software bug.

Solution
Do not use multiple parents for the operation.

3.43.93 10493
Cannot set the GUID because another object in the database already has the GUID

Error ID
ERR_CL_DUPLGUID

Error name
CL_DUPLGUID

Cause
Most likely during import, the GUID from the import file was name was modified and is now a duplicate.

Solution
Clear the GUID from the import file and re-import.

3.43.94 10494
Cannot change the GUID, because it already has a GUID.

Error ID
ERR_CL_ALREADYHAVEGUID

Error name
CL_ALREADYHAVEGUID

Cause
Most likely during import, attempted to set a GUID from the import file, but object already has a different
GUID.

1062 www.honeywell.com
 3 ERROR CODES

Solution
Clear the GUID from the import file and re-import.

3.43.95 10495
Cannot find the GUID

Error ID
ERR_CL_GUIDNOTFOUND

Error name
CL_GUIDNOTFOUND

Cause
Lookup on GUID failed, not a real problem

Solution
None.

3.43.96 10496
Warning: Block <systemdefined> does not exist in the project.

Error ID
ERR_CL_BLOCKNOTEXIST

Error name
CL_BLOCKNOTEXIST

Cause
Block does not exist in the Project tab during update to project operation.

Solution
None.

1063
3 ERROR CODES

3.44 Codes 10500 to 10598

Related topics
“10500” on page 1065
“10501” on page 1065
“10502” on page 1066
“10503” on page 1066
“10504” on page 1067
“10505” on page 1067
“10506” on page 1067
“10507” on page 1068
“10508” on page 1068
“10509” on page 1068
“10510” on page 1069
“10511” on page 1069
“10512” on page 1069
“10513” on page 1070
“10514” on page 1070
“10515” on page 1070
“10516” on page 1071
“10517” on page 1071
“10518” on page 1071
“10519” on page 1072
“10520” on page 1072
“10521” on page 1072
“10522” on page 1073
“10523” on page 1073
“10524” on page 1073
“10525” on page 1074
“10526” on page 1074
“10527” on page 1074
“10528” on page 1075
“10529” on page 1075
“10530” on page 1075
“10531” on page 1076
“10532” on page 1076
“10534” on page 1076
“10535” on page 1077
“10551” on page 1077
“10552” on page 1078
“10553” on page 1078
“10554” on page 1078
“10555” on page 1079
“10556” on page 1079
“10557” on page 1079
“10558” on page 1080
“10559” on page 1080

1064 www.honeywell.com
 3 ERROR CODES

“10560” on page 1080

“10561” on page 1081
“10562” on page 1081
“10563” on page 1081
“10564” on page 1082
“10565” on page 1082
“10566” on page 1082
“10567” on page 1083
“10568” on page 1083
“10569” on page 1083
“10570” on page 1084
“10583” on page 1084
“10584” on page 1085
“10585” on page 1085
“10586” on page 1085
“10587” on page 1086
“10588” on page 1086
“10589” on page 1086
“10590” on page 1087
“10591” on page 1087
“10592” on page 1087
“10593” on page 1088
“10594” on page 1088
“10595” on page 1088
“10596” on page 1089
“10597” on page 1089
“10598” on page 1089

3.44.1 10500
Server API returned Error.

Error ID
ERR_CL_SCAN_API

Error name
CL_SRVRAPI

Cause
None.

Solution
None.

3.44.2 10501
Server Capacity Error.

1065
3 ERROR CODES

Error ID
ERR_CL_SCAN_CAPACITY

Error name
CL_SRVRCAP

Cause
There are more points in the load list than will fit into the Server's database.

Solution
Delete some points from the load operation.

3.44.3 10502
Server Tagname Error tag <name>
This error appears when you load a tag name of a strategy, which is configured in the Control Builder, is same
as the name of asset configured in the Enterprise Model. When you click Continue, the tag loads to the
controller but you cannot view the display for such a tag in the Station.

Error ID
ERR_CL_SCAN_TAGNAME

Error name
CL_SRVRTAG

Cause
Experion Server is unable to create a unique tag for display access because the loaded tag name of the strategy
conflicts with the name of an asset configured in the Enterprise Model. When the error appears during loading,
you cannot view the display for such a tag in the Station since the tag is not created in the Experion Server.

Solution
To verify that tag is a legal Server tag name, perform anyone of the following:
• Change the tag name of the strategy and perform reload.
• Before you rename the strategy, delete the strategy from the Monitoring view.

3.44.4 10503
Server History Records Error

Error ID
ERR_CL_SCAN_HIST_RECS

Error name
CL_SRVRHREC

Cause
An error was returned upon validating server history records, or number of parameters for which history is
being collected exceeds the server's capacity. the specific error returned by the server is listed in the error log.

1066 www.honeywell.com
 3 ERROR CODES

Solution
Correct history data or reduce the number of parameters for which history is being collected.

3.44.5 10504
Server Area Syntax Error tag <name> area <area-name>

Error ID
ERR_CL_SCAN_AREA_SYNTAX

Error name
CL_SRVRARSYN

Cause
Error returned when trying to assign a tag to an Area.

Solution
Verify that Area name is defined and is valid.

3.44.6 10505
Server Connect Error.

Error ID
ERR_CL_SCAN_CONNECT

Error name
CL_SRVRCONN

Cause
Unable to connect to server to validate or load data.

Solution
Insure that Server IP address is correctly defined. This error is returned if there is no server and the address is
set to zero. Just continue with the load, the server database load will be skipped.

3.44.7 10506
Server Disconnect Error.

Error ID
ERR_CL_SCAN_DISCONNECT

Error name
CL_SRVRDISC

Cause
An error occurred while trying to disconnect from server. Connection to server may have been lost.

1067
3 ERROR CODES

Solution
None.

3.44.8 10507
Server Point Build Error.

Error ID
ERR_CL_SCAN_POINT_BLD

Error name
CL_SRVRPTBLD

Cause
This error is not currently issued by the Control Library.

Solution
None.

3.44.9 10508
Server Error - no error file.

Error ID
ERR_CL_SCAN_NO_ERROR_FILE

Error name
CL_SRVRNOERRFIL

Cause
Upon trying to retrieve the error file, file was not found.

Solution
This error is not currently issued by the Control Library.

3.44.10 10509
Server Error - area <area-name> undefined for tag <tag-name>.

Error ID
ERR_CL_SCAN_AREA_NONE

Error name
CL_SRVRARNONE

Cause
When defining the specified tag, its assigned area could not be found.

1068 www.honeywell.com
 3 ERROR CODES

Solution
Make sure Server area has been defined.

3.44.11 10510
Server Error

Error ID
ERR_CL_SCAN_ERROR

Error name
CL_SRVRERR

Cause
Error while validating server tag names.

Solution
Correct problem with tag names.

3.44.12 10511
Server Warning

Error ID
ERR_CL_SCAN_WARNING

Error name
CL_SRVRWARN

Cause
Error while validating server areas.

Solution
Correct problem with areas.

3.44.13 10512
Registry returned bad status getting Server IP address or hostname.

Error ID
ERR_CL_SCAN_BAD_IP_ADDR

Error name
CL_SRVRIPADDR

Cause
An error was returned by the Windows Registry when trying to look up the server's IO address or Host Name.

1069
3 ERROR CODES

Solution
Use REGEDIT32 to verify correct format of Registry entries.

3.44.14 10513
Server tag name <name> is too long.

Error ID
ERR_CL_SCAN_TAGNAME_TOO_LONG

Error name
CL_SRVRTAGLONG

Cause
Tag name is longer than maximum length allowed for server tag names.

Solution
None.

3.44.15 10514
Area name <name> is too long for tag <name>.

Error ID
ERR_CL_ SCAN _AREANAME_TOO_LONG

Error name
CL_SRVRARLONG

Cause
Area name is longer than maximum length allowed for server area names.

Solution
None.

3.44.16 10515
Invalid Server IP address or hostname.

Error ID
ERR_CL_ SCAN _INVALID_IP_ADDR

Error name
CL_SRVRINVADR

Cause
Server IP address or host name is invalid.

1070 www.honeywell.com
 3 ERROR CODES

Solution
Correct the server address/host name.

3.44.17 10516
System error <number>

Error ID
ERR_CL_SYSTEM_ERROR

Error name
CLSYSERR

Cause
A system error was returned by the Server sub-system. See the error log for the specific error number returned.

Solution
Refer to CCA Server documentation for the specific error in question.

3.44.18 10517
Cannot read workstation hostname.

Error ID
ERR_CL_HOSTNAME

Error name
CLHOSTNAME

Cause
None.

Solution
None.

3.44.19 10518
Problem initializing Win Sockets.

Error ID
ERR_CL_SOCKETS

Error name
CLSOCKETS

Cause
None.

1071
3 ERROR CODES

Solution
None.

3.44.20 10519
Share item does not exist.

Error ID
ERR_CL_NO_SHARE

Error name
CLNOSHARE

Cause
None.

Solution
None.

3.44.21 10520
Failed to load HSCCLI32.DLL.

Error ID
ERR_CL_SCAN_LOAD_LIB

Error name
SCANLOADLIB

Cause
None.

Solution
None.

3.44.22 10521
Failed to start HSCCLI32.DLL.

Error ID
ERR_CL_SCAN_STARTUP

Error name
SCANSTARTUP

Cause
None.

1072 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.44.23 10522
Failed to determine Server location.

Error ID
ERR_CL_SCAN_LOCATION

Error name
SCANLOCATION

Cause
None.

Solution
None.

3.44.24 10523
Error in loading Server configuration for strategy.

Error ID
ERR_CL_SCAN_LOAD_FAILED

Error name
SCANLOADFAILED

Cause
None.

Solution
None.

3.44.25 10524
Error in saving Uploaded history configuration for the strategy.

Error ID
ERR_CL_SCAN_HISTORY_SAVE_FAILED

Error name
SCANHISTORYSAVEFAILED

Cause
None.

1073
3 ERROR CODES

Solution
None.

3.44.26 10525
Error in saving Uploaded trend configuration for the strategy.

Error ID
ERR_CL_SCAN_TREND_SAVE_FAILED

Error name
SCANTRENDSAVEFAILED

Cause
None.

Solution
None.

3.44.27 10526
Error in saving Uploaded group configuration for the strategy.

Error ID
ERR_CL_SCAN_GROUP_SAVE_FAILED

Error name
SCANGROUPSAVEFAILED

Cause
None.

Solution
None.

3.44.28 10527
Error in Server Scripting.

Error ID
ERR_CL_SCAN_SRVSCRIPT

Error name
CL_SCANSRVSCRIPT

Cause
None.

1074 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.44.29 10528
Deleted items need to be removed.

Error ID
ERR_CL_SCAN_SRVSCRIPT_CLEANUP_REQ

Error name
CL_SCAN_SRVSCRIPT_CLEANUP_REQ

Cause
Too many scripts for deleted trigger parameter in the server script.

Solution
Invoke the script editor and remove the scripts for deleted parameter.

3.44.30 10529
Cannot Load History Configuration Information for Parameter item as Gating parameter references a substitute
parameter item.

Error ID
ERR_CL_GATEPARAM_SUBSTITUTEPARAM

Error name
CL_GATEPARAM_SUBSTITUTEPARAM

Cause
This Error message is displayed if the user tries to load a History Parameter to Server whose Gating parameter
references a Substituted parameter.

Solution
Resolve the substituted parameters and try again.

3.44.31 10530
Server Error - Associated Asset undefined for tag

Error ID
ERR_CL_ASSOCASSET_NONE

Error name
CL_ASSOCASSET_NONE

1075
3 ERROR CODES

Cause
Server Error - Associated Asset undefined for tag

Solution
None.

3.44.32 10531
Server Associated Asset Syntax Error tag asset

Error ID
ERR_CL_ASSOCASSET_SYNTAX

Error name
CL_ASSOCASSET_SYNTAX

Cause
Server Associated Asset Syntax Error tag asset

Solution
None.

3.44.33 10532
Associated Asset name is too long for tag

Error ID
ERR_CL_ASSOCASSETNAME_TOO_LONG

Error name
CL_ASSOCASSETNAME_TOO_LONG

Cause
Associated Asset name is too long for tag

Solution
None.

3.44.34 10534
Unable to validate the uniqueness of the Tag Name.

Error ID
ERR_CL_SR_API

Error name
CL_SYSREPAPI

1076 www.honeywell.com
 3 ERROR CODES

Cause
This error message appears during load operations during any of the following conditions:
• If the Control Builder was logged on using localhost as the Server Name instead of using the actual server
name.
• If Experion PKS System Repository service is not running on the server to which the Control Builder was
connected to.
• Control Builder is open and a server switchover has happened.

Solution
Ensure that the Control Builder is connected to the current primary server (check this from the status bar of the
Configuration Studio) and that the Experion PKS System Repository service on that server is running.

3.44.35 10535
Invalid item name

Error ID
ERR_CL_SCAN_ITEMNAME

Error name
CL_SRVRITEM

Cause
This item name has already been used by another tag in the system.

Solution
Use a different item name for the tag.

3.44.36 10551
Directory is invalid.

Error ID
ERR_CL_MIGRAT_INVALIDDIR

Error name
CL_MIGRAT_INVALIDDIR

Cause
This will be caused when the current logged on user is not having sufficient privileges to create a new directory
or while making calls to windows API with this directory as an argument, the API is returning an error.

Solution
Make sure the current logged in user is having sufficient privileges to create file/director in the mentioned path.
If the user already has sufficient privileges to create the directory, check the error log to get the exact reason
why windows APIs are returning errors.

1077
3 ERROR CODES

3.44.37 10552
Could not get system drive.

Error ID
ERR_CL_MIGRAT_SYSDRIVE

Error name
CL_MIGRAT_SYSDRIVE

Cause
Not able to determine the drive volume in which Operating System is installed.

Solution
There is no work around. Error log will have the exact error why application could not get the system drive.

3.44.38 10553
Could not get temporary directory path to backup files.

Error ID
ERR_CL_MIGRAT_TEMPPATH

Error name
CL_MIGRAT_TEMPPATH

Cause
This situation will arise when the user is not having both system defined and user defined TEMP or TMP
environment variables.

Solution
Make sure the system or user defined TEMP or TMP environment variable is defined

3.44.39 10554
None.

Error ID
ERR_CL_MIGRAT_DRIVESPACE

Error name
CL_MIGRAT_DRIVESPACE

Cause
None.

1078 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.44.40 10555
There is no enough space to take backup of Check point files for this entity.

Error ID
ERR_CL_MIGRAT_NOSPACE

Error name
CL_MIGRAT_NOSPACE

Cause
There is not enough space available for the current logged on user in temporary directory.

Solution
Make sure there is enough space in System/User defined environment variable.

3.44.41 10556
Failed to backup checkpoint files for the entity.

Error ID
ERR_CL_MIGRAT_BKUPCHKPTFILES

Error name
CL_MIGRAT_BKUPCHKPTFILES

Cause
Could not copy Check point related files to the temp directory

Solution
Make sure sufficient free space is available in System/User defined temporary directory.

3.44.42 10557
Failed to remove Checkpoint backup files.

Error ID
ERR_CL_MIGRAT_REMOVEBKUP

Error name
CL_MIGRAT_REMOVEBKUP

Cause
User is not having privileges to delete the file/directory in temporary directory.

1079
3 ERROR CODES

Solution
Make sure enough privileges to the current logged in user to delete files/directories in temporary directory.

3.44.43 10558
Failed to restore Checkpoint backup files.

Error ID
ERR_CL_MIGRAT_RESTORECHKPTFILES

Error name
CL_MIGRAT_RESTORECHKPTFILES

Cause
User is not having sufficient privileges/space to restore checkpoint files back.

Solution
Proper reason will be logged in error log. Make sure the current logged in user is having privileges/space to do
this operation.

3.44.44 10559
Unable to create directory to take Check point file Backup

Error ID
ERR_CL_MIGRAT_DIRCREATE

Error name
CL_MIGRAT_DIRCREATE

Cause
Wizard is not able to create a folder under Chkpt share on the server to take Check Point files.

Solution
Make sure the Chkpt and CPBASE shares are exists and the user who is running wizard is given sufficient
privileges to create the directory and files under it.

3.44.45 10560
Cannot copy file.

Error ID
ERR_CL_MIGRAT_COPYFILE

Error name
CL_MIGRAT_COPYFILE

1080 www.honeywell.com
 3 ERROR CODES

Cause
User permissions or available free space might cause this problem.

Solution
Make sure the logged in user is having sufficient permissions to do this operation.

3.44.46 10561
Cannot delete file.

Error ID
ERR_CL_MIGRAT_DELFILE

Error name
CL_MIGRAT_DELFILE

Cause
User permissions might cause this problem.

Solution
Make sure the logged in user has sufficient permissions to do this operation.

3.44.47 10562
Share is not available on the Server.

Error ID
ERR_CL_MIGRAT_SHAREDOESNTEXIST

Error name
CL_MIGRAT_SHAREDOESNTEXIST

Cause
Before Wizard starts On Process Migration, it will take a backup of Check point files on to server Chkpt and
CPBASE Share. If the Share is not exists on the server, the Wizard will inform this to the user.

Solution
Make sure the Chkpt and CPBASE shares exist on the server with required access.

3.44.48 10563
Sufficient Privileges are not given to the current logged in user to take Check Point files on Server.

Error ID
ERR_CL_MIGRAT_ACCESS_DENIED

Error name
CL_MIGRAT_ACCESS_DENIED

1081
3 ERROR CODES

Cause
Before the Wizard starts On Process Migration, it takes backup of Check point files on to server Chkpt and
CPBASE Share. If the Share is not given write permission to the user who is trying to start OPM.

Solution
Make sure the Chkpt and CPBASE shares exists on the server with required access.

3.44.49 10564
The utility functions which are used for Chkpt Backup & Restore, passed a bad parameter.

Error ID
ERR_CL_MIGRAT_NETAPIPROBLEM

Error name
CL_MIGRAT_NETAPIPROBLEM

Cause
This is an internal error message

Solution
Restart Control Builder Application

3.44.50 10565
Internal Error message

Error ID
ERR_CL_MIGRAT_INVALIDPARAM

Error name
CL_MIGRAT_INVALIDPARAM

Cause
This is a internal error message

Solution
Restart Control Builder Application.

3.44.51 10566
Migration wizard encountered an error while communicating to the Series C Module.

Error ID
ERR_CL_MIGRATE_ECATNOGOOD

Error name
CL_MIGRATE_ECATNOGOOD

1082 www.honeywell.com
 3 ERROR CODES

Cause
Wizard uses eCAT Library to communicate Series C Modules like C300 and FIM4. eCAT library returned
returned kMsNg status for one of eCAT library API function.

Solution
Make sure at least one tool other than the Control Builder is able to communicate to the module which is under
Migration.

3.44.52 10567
eCAT Library lost communication to Series C Module.

Error ID
ERR_CL_MIGRATE_ECATNOCONNECT

Error name
CL_MIGRATE_ECATNOCONNECT

Cause
Wizard opens a connection to a Series Module which is under migration. Sometimes the eCAT library restarts
modules to bring them in a required state to do the required operation. So in such conditions, there is a
possibility of loosing a connection. eCAT will not be able to communicate to the Series C Module

Solution
Make sure at least one tool other than the Control Builder is able to communicate to the module which is under
Migration.

3.44.53 10568
eCAT Library returned an unknown error.

Error ID
ERR_CL_MIGRATE_ECATUNKNOWN

Error name
CL_MIGRATE_ECATUNKNOWN

Cause
eCAT API returned an unexpected error.

Solution
Make sure at least one tool other than the Control Builder is able to communicate to the module which is under
Migration.

3.44.54 10569
Migration wizard failed to get the desired value for the parameter.

1083
3 ERROR CODES

Error ID
ERR_CL_MIGRATE_WAITERROR

Error name
CL_MIGRATE_WAITERROR

Cause
Wizard implemented a state machine of controller indirect synchronization mechanism. In this implementation
wizard waits for few parameter values to reach a desired value to issue another command.

Solution
There could be a lot of situations where this can happen.

3.44.55 10570
During Indirect synchronization an error occurred.

Error ID
ERR_CL_MIGRATE_INDRCTSYNCFAIL

Error name
CL_MIGRATE_INDRCTSYNCFAIL

Cause
While doing On Process Migration the wizard does an indirect way of synching the two controllers at different
firmware releases. While doing this the Controller faced some problems due to which OPM cannot proceed
until a user has rectified the existing problem.

Solution
The reasons for this failure could be there are Ghost blocks/connections present in the Controller. There could
be a problem in controller state machine.

3.44.56 10583
Server Error Outputting to File.

Error ID
ERR_CL_HSC_C_FILE_OUTPUT_ERROR

Error name
CL_HSCFILOUTERR

Cause
None.

Solution
None.

1084 www.honeywell.com
 3 ERROR CODES

3.44.57 10584
Server Could Not Open File - Check Directory.

Error ID
ERR_CL_HSC_C_FILE_NOT_OPEN

Error name
CL_HSCFILNOPEN

Cause
None.

Solution
None.

3.44.58 10585
Server has No Points to Build.

Error ID
ERR_CL_HSC_C_NO_POINTS_TO_BUILD

Error name
CL_HSCNOPTBLD

Cause
None.

Solution
None.

3.44.59 10586
Server Point Capacity Limit.

Error ID
ERR_CL_HSC_C_NOT_ENOUGH_HIST_POINTS

Error name
CL_HSCNENUFHP

Cause
None.

Solution
None.

1085
3 ERROR CODES

3.44.60 10587
Server Point Capacity Limit.

Error ID
ERR_CL_HSC_C_NOT_ENOUGH_POINTS

Error name
CL_HSCNTENUFPT

Cause
None.

Solution
None.

3.44.61 10588
Server close trace failed.

Error ID
ERR_CL_HSC_C_CLOSETRACE_FAIL

Error name
CL_HSCCLOTRFL

Cause
None.

Solution
None.

3.44.62 10589
Server close debug failed.

Error ID
ERR_CL_HSC_C_CLOSEDBUG_FAIL

Error name
CL_HSCCLODBGFL

Cause
None.

Solution
None.

1086 www.honeywell.com
 3 ERROR CODES

3.44.63 10590
Server WSA Cleanup Failed.

Error ID
ERR_CL_HSC_C_WSACLEANUP_FAIL

Error name
CL_HSCWSACLNFL

Cause
None.

Solution
None.

3.44.64 10591
Server Invalid Connection.

Error ID
ERR_CL_HSC_C_INVALID_CONNECTION

Error name
CL_HSCINVCONN

Cause
None.

Solution
None.

3.44.65 10592
Server No Free Connection

Error ID
ERR_CL_HSC_C_NO_FREE_CONNECTION

Error name
CL_HSCNOFREECON

Cause
Server does not have capacity to accept a connection.

Solution
May have too many clients for server.

1087
3 ERROR CODES

3.44.66 10593
Server not started.

Error ID
ERR_CL_HSC_C_NOT_STARTED

Error name
CL_HSCNOTSTART

Cause
Server was not started.

Solution
Start server.

3.44.67 10594
Server WSA (WINSOCK) startup failed.

Error ID
ERR_CL_HSC_C_WSASTARTUP_FAIL

Error name
CL_HSCWSASTRTFL

Cause
Server was unable to start Windows Sockets (WINSOCK) which is the underlying mechanism used for TCP/IP
communication.

Solution
Insure that proper components for networking are installed at server such as WINSOCK DLL and that
networking options are set up correctly.

3.44.68 10595
Server WINSOCK open failed

Error ID
ERR_CL_HSC_C_WINSOCK_OPEN_FAIL

Error name
CL_HSCWSOPENFL

Cause
Server was unable to open a socket for TCP/IP communication.

1088 www.honeywell.com
 3 ERROR CODES

Solution
Insure that proper components for networking are installed at server such as WINSOCK DLL and that
networking options are set up correctly.

3.44.69 10596
Server open trace failed.

Error ID
ERR_CL_HSC_C_OPENTRACE_FAIL

Error name
CL_HSCOPENTRFL

Cause
Server open trace failed

Solution
None.

3.44.70 10597
Server open debug failed.

Error ID
ERR_CL_HSC_C_OPENDEBUG_FAIL

Error name
CL_HSCOPENDBGFL

Cause
Server open debug failed.

Solution
None.

3.44.71 10598
Server already started.

Error ID
ERR_CL_HSC_C_ALREADY_STARTED

Error name
CL_HSCALRDYSTRT

Cause
Server was already started.

1089
3 ERROR CODES

Solution
None.

1090 www.honeywell.com
 3 ERROR CODES

3.45 Codes 10601 to 10699

Related topics
“10601” on page 1092
“10602” on page 1093
“10603” on page 1093
“10604” on page 1093
“10605” on page 1094
“10606” on page 1094
“10607” on page 1094
“10608” on page 1095
“10609” on page 1095
“10610” on page 1095
“10611” on page 1096
“10612” on page 1096
“10613” on page 1096
“10625” on page 1097
“10626” on page 1097
“10627” on page 1097
“10628” on page 1098
“10629” on page 1098
“10631” on page 1098
“10632” on page 1099
“10633” on page 1099
“10634” on page 1100
“10635” on page 1100
“10636” on page 1100
“10637” on page 1101
“10638” on page 1101
“10639” on page 1101
“10640” on page 1102
“10641” on page 1102
“10642” on page 1102
“10643” on page 1103
“10644” on page 1103
“10645” on page 1103
“10646” on page 1104
“10647” on page 1104
“10648” on page 1104
“10649” on page 1105
“10650” on page 1105
“10651” on page 1105
“10652” on page 1106
“10653” on page 1106
“10655” on page 1106
“10661” on page 1107
“10662” on page 1107

1091
3 ERROR CODES

“10663” on page 1107

“10671” on page 1108
“10672” on page 1108
“10673” on page 1108
“10674” on page 1109
“10675” on page 1109
“10676” on page 1110
“10677” on page 1110
“10678” on page 1110
“10679” on page 1111
“10680” on page 1111
“10681” on page 1111
“10682” on page 1112
“10683” on page 1112
“10684” on page 1112
“10685” on page 1113
“10686” on page 1113
“10687” on page 1113
“10688” on page 1114
“10689” on page 1114
“10690” on page 1114
“10691” on page 1115
“10692” on page 1115
“10693” on page 1115
“10694” on page 1116
“10695” on page 1116
“10696” on page 1116
“10697” on page 1117
“10698” on page 1117
“10699” on page 1117

3.45.1 10601
Does not have Whole Array support

Error ID
ERR_CL_NO_WHOLE_ARRAY_SUPPORT

Error name
CL_NO_WHOLE_ARRAY_SUPPORT

Cause
Strategy is not an OPC block or has an assignment parent which does not support whole arrays

Solution
Unassign the block or assign it to an EE which supports whole arrays

1092 www.honeywell.com
 3 ERROR CODES

3.45.2 10602
Whole Array Parameter cannot be connected to a Scalar / Nested Parameter.

Error ID
ERR_CL_WA_CONN_IDX_MISMATCH

Error name
CL_WA_CONN_IDX_MISMATCH

Cause
A whole array indexed parameter has been connected to a scalar / nested parameter

Solution
Connect the whole array indexed parameter to another whole array indexed parameter OR
Connect the non-whole array indexed parameter to another non-whole array indexed parameter.

3.45.3 10603
Dimension Mismatch in the two ends of a Whole Array Connection.

Error ID
ERR_CL_WA_CONN_DIMENSION_MISMATCH

Error name
CL_WA_CONN_DIMENSION_MISMATCH

Cause
A whole array connection between two parameters with different dimensions has been made

Solution
Make a whole array connection between two parameters with same dimension

3.45.4 10604
Whole Array Connection between 2 dimensional parameters with different second dimension sizes cannot be
made.

Error ID
ERR_CL_WA_CONN_2DPARAM_2D_MISMATCH

Error name
CL_WA_CONN_2DPARAM_2D_MISMATCH

Cause
A whole array connection between two 2 dimensional parameters with different second dimension sizes has
been made.

1093
3 ERROR CODES

Solution
Make a whole array connection between two 2 dimensional parameters only if their second dimension sizes
match.

3.45.5 10605
Parameter data size greater than 8K not allowed.

Error ID
ERR_CL_WA_PARAM_SIZE_MAX_EXCEEDED

Error name
CL_WA_PARAM_SIZE_MAX_EXCEEDED

Cause
A whole array indexed connection with the size of either / both ends greater than 8K bytes is being loaded.

Solution
Delete the faulty connection, and attempt to load again.

3.45.6 10606
Does not support Whole Arrays

Error ID
ERR_CL_EE_NO_WA_ATTRIBUTE

Error name
CL_EE_NO_WA_ATTRIBUTE

Cause
A strategy with Whole Array pins / connections on itself or its contained blocks is being assigned to an
execution environment that does not support Whole Arrays.

Solution
Delete the Whole Array pins / connections, and attempt to assign again.
OR
Assign the strategy to an execution environment that supports Whole Arrays.

3.45.7 10607
Whole Array origin cannot be set does not have Whole Array pin exposure

Error ID
ERR_CL_INVALID_WHOLE_ARRAY_ORIGIN

Error name
CL_INVALID_WHOLE_ARRAY_ORIGIN

1094 www.honeywell.com
 3 ERROR CODES

Cause
A whole array origin is being defined on a parameter that does not have whole array pin exposure.

Solution
Assign whole array pin exposure permission to the origin parameter by changing the def file.

3.45.8 10608
Whole Array parameter cannot be set as Parameter Reference

Error ID
ERR_CL_INVALID_WA_PARAM_REF

Error name
CL_INVALID_WA_PARAM_REF

Cause
A whole array parameter is being set as a parameter reference.

Solution
Do not set a whole array parameter as a parameter reference.

3.45.9 10609
Indexed Projected Parameter cannot be set as origin

Error ID
ERR_CL_INVALID_INDEXED_ORIGIN

Error name
CL_INVALID_INDEXED_ORIGIN

Cause
An index of a whole array projected parameter is being set as the origin of another projected parameter.

Solution
Do not set an index of a whole array projected parameter as the origin of another projected parameter.
This is a constraint at this point.

3.45.10 10610
First Dimension cannot be changed. Whole Array connection exists.

Error ID
ERR_CL_INVALID_DIM_CONN_EXISTS

Error name
CL_INVALID_DIM_CONN_EXISTS

1095
3 ERROR CODES

Cause
The first dimension of the parameter cannot be changed as a whole array connection exists.

Solution
If a whole array connection exists, do not change the first dimension.

3.45.11 10611
Cannot make individual parameter template undefined. Whole Array parameter is template defining.

Error ID
ERR_CL_CANT_DEL_IND_WAEXISTS

Error name
CL_CANT_DEL_IND_WAEXISTS

Cause
An individual parameter with whole array permission is being template undefined when the whole array
parameter itself is template defined.

Solution
Make the whole array parameter template undefined.

3.45.12 10612
Cannot add / remove WholeArrayUDT symbol attribute.

Error ID
ERR_CL_CANT_ADD_REM_WA_UDT_SA

Error name
CL_CANT_ADD_REM_WA_UDT_SA

Cause
A symbol attribute of type WholeArrayUDT could not be added / removed because of various reasons.

Solution
None.

3.45.13 10613
Block as an ID that previously existed with different GUID than specified. Abort.

Error ID
ERR_CL_NOMATCHGUID

Error name
CL_NOMATCHGUID

1096 www.honeywell.com
 3 ERROR CODES

Cause
Most likely caused by backing up or restoring QVCS and ERDB independent of each other.
For example, restore an older ERDB and start building blocks, then use QVCS to revert.
It's possible that a block in QVCS is using an id that got assigned to newly added blocks.

Solution
Make sure the databases are consistent

3.45.14 10625
Owning end connection cannot have a RunTime Computed Index.

Error ID
ERR_CL_INVALID_RUNTIME_OWNING_PARAM

Error name
CL_INVALID_RUNTIME_OWNING_PARAM

Cause
The owning end of a connection has a run time computed index.

Solution
--

3.45.15 10626
Parameter connector cannot have a RunTime Computed Index.

Error ID
ERR_CL_INVALID_RUNTIME_PARAM_CONNECTOR

Error name
CL_INVALID_RUNTIME_PARAM_CONNECTOR

Cause
A parameter connector has a run time computed index.

Solution
Change the parameter connector.

3.45.16 10627
Different assignment parents.

Error ID
ERR_CL_DIFF_RT_ASSIGN_PARENT

1097
3 ERROR CODES

Error name
CL_DIFF_RT_ASSIGN_PARENT

Cause
The strategy executing the expression, and the strategy for which the run time indexed expression is provided
have different execution environments.

Solution
Either change the expression or assign both the strategies to the same EE.

3.45.17 10628
Same run time expression index(es) used, but have different assignment parents.

Error ID
ERR_CL_DIFF_RUNTIME_ASSIGN_ENV

Error name
CL_DIFF_RUNTIME_ASSIGN_ENV

Cause
The strategy executing the expression, and the strategy for which the run time indexed expression is provided
have different execution environments.

Solution
Either change the expression or assign both the strategies to the same EE.

3.45.18 10629
Use the Relationship Browser to find relevant CM / SCM expression references.

Error ID
ERR_CL_RUNTIME_REFER_REL_BROWSER

Error name
CL_RUNTIME_REFER_REL_BROWSER

Cause
The strategy executing the expression, and the strategy for which the run time indexed expression is provided
have different execution environments.

Solution
Either change the expression or assign both the strategies to the same EE.

3.45.19 10631
Module checkpoint is incompatible between the System Repository service and the checkpoint file.

1098 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_CHKPT_CMINCOMPATIBLE

Error name
CL_CMINCOMPATIBLE

Cause
The block's checkpoint compatibly parameter is not exact between the System Repository (SR) service and the
checkpoint file. SR and the checkpoint file are out of sync.

Solution
Reload the tagged block and/or rebuild the checkpoint. Then save the checkpoint for the controller having this
tagged block.

3.45.20 10632
Could not write block ext info for module in checkpoint file.

Error ID
ERR_CL_CHKPT_BLKEXTRECWRITEERR

Error name
CL_CHKPTBLKEXTRECWRITEERR

Cause
Could not create file for block extension.

Solution
Check disk space and access level and reload

3.45.21 10633
Could not read block ext info for module from checkpoint file

Error ID
ERR_CL_CHKPT_BLKEXTRECREADERR

Error name
CL_CHKPTBLKEXTRECREADERR

Cause
File not found, sharing/lock violation.

Solution
Reload this module/Rebuild Checkpoint from Monitor

1099
3 ERROR CODES

3.45.22 10634
Could not load dll

Error ID
ERR_CL_CHKPT_BLKEXTDLLLOADERR

Error name
CL_CHKPTBLKEXTDLLLOADERR

Cause
Missing block extension dll, path not correct

Solution
Install/copy the missing dll

3.45.23 10635
Could not write CCL info in checkpoint file

Error ID
ERR_CL_CHKPT_CCLWRITEERR

Error name
L_CHKPTCCLWRITEERR

Cause
Error writing CCL to checkpoint file

Solution
Reload this module/Rebuild checkpoint from Monitor

3.45.24 10636
Could not read CCL info from checkpoint file

Error ID
ERR_CL_CHKPT_CCLREADERR

Error name
CL_CHKPTCCLREADERR

Cause
Error reading CCL from the checkpoint file

Solution
Rebuild Checkpoint from Monitor and then try to restore/load

1100 www.honeywell.com
 3 ERROR CODES

3.45.25 10637
CCL library could not be located

Error ID
ERR_CL_CHKPT_MISSINGLIBCODE

Error name
CL_MISSINGLIBCODE

Cause
CCL not found in ERDB

Solution
None

3.45.26 10638
Firmware version mismatch.

Error ID
ERR_CL_CHKPT_CCLVERMISMATCH

Error name
CL_CCLVERMISMATCH

Cause
An improper checkpoint file is being used to restore.

Solution
Select a different checkpoint file.

3.45.27 10639
Module was not found in checkpoint, Rebuild checkpoint to correct the problem

Error ID
ERR_CL_CHKPT_NOTINCHKPT

Error name
CL_NOTINCHKPT

Cause
Various

Solution
Rebuild checkpoint from Monitor

1101
3 ERROR CODES

3.45.28 10640
This checkpoint file is intended to restore the node: Module not in this cluster

Error ID
ERR_CL_CHKPT_GUIDINCOMPATIBLE

Error name
CL_GUIDINCOMPATIBLE

Cause
Selecting a checkpoint file from a different cluster to restore

Solution
Select a checkpoint file from this cluster.

3.45.29 10641
This release cannot read this version of Checkpoint file. Rebuild Checkpoint to correct the problem

Error ID
ERR_CL_CHKPT_SSVERMISMATCH

Error name
CL_CHKPT_SSVERMISMATCH

Cause
A new release has been installed, but trying to read an older version of snapshot file

Solution
Rebuild checkpoint for this node.

3.45.30 10642
Create CPBase share folder!

Error ID
ERR_CL_CHKPT_NOCPBASE

Error name
CL_CHKPT_NOCPBASE

Cause
CheckpointBase is not shared as CPBase

Solution
None. Solution:Create CheckpointBase in error reporting directory and share it as CPBase with full permissions

1102 www.honeywell.com
 3 ERROR CODES

3.45.31 10643
Rebuilt the checkpoint for the module.

Error ID
ERR_CL_CHKPT_REBUILDCOMPLETE

Error name
CL_CHKPT_REBUILDCOMPLETE

Cause
This is not an error message.
The load progress bar is not updated properly during a checkpoint rebuild operation. Hence, an impression is
obtained that the rebuild failed.

Solution
This message was added to notify that the rebuild completed successfully.

3.45.32 10644
Reload platform block to rebuild checkpoint

Error ID
ERR_CL_NOPLATFORMBLOCK

Error name
CL_NOPLATFORMBLOCK

Cause
Platform does not exist or is not accessible

Solution
None

3.45.33 10645
DB version mismatch. This checkpoint cannot be used to restore.

Error ID
ERR_CL_CHKPT_DBVERMISMATCH

Error name
CL_CHKPT_DBVERMISMATCH

Cause
Selected checkpoint was built in a different release

1103
3 ERROR CODES

Solution
Rebuild checkpoint if this error is seen during a load/delete or select a different checkpoint to restore.

3.45.34 10646
Could not read DB version from checkpoint

Error ID
ERR_CL_CHKPT_NODBVER

Error name
CL_CHKPT_NODBVER

Cause
There was an error retrieving DB version info when checkpoint was created.

Solution
Rebuild checkpoint if this error is seen during a load/delete or select a different checkpoint to restore.

3.45.35 10647
CCL mismatch. This Checkpoint does not contain valid CCLs.

Error ID
ERR_CL_CHKPT_CCL_MISMATCH

Error name
CL_CHKPT_CCL_MISMATCH

Cause
One or more CCLs were patched. The selected Checkpoint file does not contain the patched binary.

Solution
You may have to perform the following:
• Select a different Checkpoint file or rebuild Checkpoint.
• Apply the server reboot after rebuilding the Checkpoint.

3.45.36 10648
Library in checkpoint does not match the library in database.

Error ID
ERR_CL_CHKPT_CCL_PATCHED

Error name
CL_CHKPT_CCL_PATCHED

1104 www.honeywell.com
 3 ERROR CODES

Cause
CCL was patched. The selected checkpoint file does not contain the patched binary.

Solution
Select a different checkpoint file or rebuild checkpoint.

3.45.37 10649
'CPCOMPATIBLE' mismatch between the checkpoint file and the SR service.

Error ID
ERR_CL_CHKPT_COMPATMISMATCH

Error name
CL_CHKPT_COMPATMISMATCH

Cause
The block's checkpoint compatibly parameter is not exact between the SR service and the checkpoint file. SR
and checkpoint file are out of sync.

Solution
Rebuild the checkpoint file and then save the checkpoint for the controller having this tagged block.

3.45.38 10650
Failed to update Save Percentage information for entity in Sysrep.

Error ID
ERR_CL_CHKPT_SAVEPERCUPDATEFAIL

Error name
CL_CHKPT_SAVEPERCUPDATEFAIL

Cause
Sysrep may not be running

Solution
Restart Sysrep

3.45.39 10651
Could not access the SR service for reading compatibility value.

Error ID
ERR_CL_CHKPT_COMPAT_SRACCESS_FAIL

Error name
CL_CHKPT_COMPAT_SRACCESS_FAIL

1105
3 ERROR CODES

Cause
SR might not be running or is out of sync with the Control builder (CB) and/or the Engineering Repository
Database (ERDB).

Solution
Restart the SR.

3.45.40 10652
Copy back to file failed.

Error ID
ERR_CL_CHKPT_COPYBACK_FAIL

Error name
CL_CHKPT_COPYBACK_FAIL

Cause
Copy back to LATEST file failed for the newly saved file. Latest file might be in use.

Solution
Retry save after some time.

3.45.41 10653
Module has its checkpoint entirety state changed to mis-matched.

Error ID
ERR_CL_CHKPT_CABMISMATCH

Error name
ERR_CL_CHKPT_CABMISMATCH

Cause
A checkpoint rebuild was performed before reloading the edited custom (CAB/CDB/PHASE, and so on) types
for component blocks in this tagged block. Also, this error can occur on any tagged block when its checkpoint
compatibility number is not compared during a checkpoint rebuild.

Solution
Reload this tagged block from the project side.

3.45.42 10655
User can view and run the CP Task for already deleted controller.

Error ID
EXPKS_E_WARN_CL_CHKPT_DELCHKPTTASK

1106 www.honeywell.com
 3 ERROR CODES

Error name
CL_CHKPT_DELCHKPTTASK

Cause
The checkpoint task runs for the deleted controller also.

Solution
Do not delete controller from the Project view when the controller is still in the checkpoint tasks.

3.45.43 10661
Invalid Execution Period.

Error ID
ERR_CL_CM_ASSIGN_INVALIDPERIOD

Error name
CL_CM_ASSIGN_INVALIDPERIOD

Cause
Configured CM execution period is invalid for new CM assignment

Solution
None; Assignment operation fails and CM becomes unassigned.

3.45.44 10662
Invalid Execution Period. Valid Periods are: DEFAULT, NONE and PERIOD >= 500ms

Error ID
ERR_CL_CM_ASSIGN_INVALIDACEPERIOD

Error name
CL_CM_ASSIGN_INVALIDACEPERIOD

Cause
None.

Solution
Shortened ACE valid periods due to error handling size limitation

3.45.45 10663
Invalid Execution Period. Valid Periods are: DEFAULT, and 500ms <= PERIOD <= 20Sec

Error ID
ERR_CL_CM_ASSIGN_INVALIDSCMPERIOD

1107
3 ERROR CODES

Error name
CL_CM_ASSIGN_INVALIDSCMPERIOD

Cause
An unassigned SCM is being assigned with an execution period that is invalid for the selected CEE type.

Solution
Select a different period from the dialog box. Refer to PDF Collection for valid SCM execution periods for each
CEE type.

3.45.46 10671
Bad Nested Transaction level

Error ID
ERR_CL_BAD_TRANSACTION_LEVEL

Error name
CL_BAD_TRANSACTION_LEVEL

Cause
Bad Nested Transaction level

Solution
None.

3.45.47 10672
A Nested transaction already exists.

Error ID
ERR_CL_BAD_NESTED_TRANSACTION

Error name
CL_BAD_NESTED_TRANSACTION

Cause
A Nested transaction already exists. More than one nested transaction is not allowed.

Solution
None.

3.45.48 10673
ERROR in Expression

Error ID
ERR_CL_EXPR_PARSER_FATAL_SEVERE_ERROR

1108 www.honeywell.com
 3 ERROR CODES

Error name
CL_EXPR_PARSER_FATAL_SEVERE_ERROR

Cause
Syntax error occured in the Expression.
Refer to the specific Expression error code number at: “Expression Codes 4005 to 4077” on page 1674.

Solution
Correct the Expression.

3.45.49 10674
The internal expression storage exceeded the limit specified. Internal storage cannot exceed the number of
characters specified.

Error ID
ERR_CL_EXPRSTR_TOOLONG

Error name
ERR_CL_EXPRSTR_TOOLONG

Cause
The expression written consumes more internal storage than allocated for it in the database.

Solution
Modify the expression to reduce the internally consumed character storage. The parameter references may
consume more internal storage than required for the visible display. Hence, reducing the number of parameter
references may correct this error. Make other changes as required to reduce the internally consumed character
storage.

3.45.50 10675
No diagnostic information created.

Error ID
ERR_CL_EXPR_PARSER_NO_DIAGNOSTIC_MESSAGE_FORMAT

Error name
CL_EXPR_PARSER_NO_DIAGNOSTIC_MESSAGE_FORMAT

1109
3 ERROR CODES

Cause
Parser could not create diagnostic information

Solution
Correct the Expression.

3.45.51 10676
Fatal or Severe ERROR in Expression

Error ID
ERR_CL_EXPR_PARSER_FATAL_SEVERE_ERROR_MESSAGE_FORMAT

Error name
CL_EXPR_PARSER_FATAL_SEVERE_ERROR_MESSAGE_FORMAT

Cause
Error in the Expression.

Solution
Correct the Expression.

3.45.52 10677
Warning in Expression

Error ID
ERR_CL_EXPR_PARSER_WARNING_MESSAGE_FORMAT

Error name
CL_EXPR_PARSER_WARNING_MESSAGE_FORMAT

Cause
Warning in the Expression.

Solution
Correct the Expression.

3.45.53 10678
The expression string is too long. The displayed expression cannot exceed the characters specified.

Error ID
ERR_CL_EXPRESSIONTOOLONG

Error name
CL_EXPRESSIONTOOLONG

1110 www.honeywell.com
 3 ERROR CODES

Cause
The displayed expression is too long.

Solution
Shorten the displayed expression.

3.45.54 10679
Maximum number of PCDI Master Blocks per controller exceeded.

Error ID
ERR_CL_MBTCPMASTER_MAXALLOW

Error name
CL_MBTCPMASTER_MAXALLOW

Cause
Added more than eight Master Block to a controller.

Solution
Add additional block(s) to a different controller.

3.45.55 10680
Invalid Start Index. Must be 1..65535 or 100001..165535.

Error ID
ERR_CL_MBTCPFLAG_INVALID_STARTINDEX

Error name
CL_MBTCPFLAG_INVALID_STARTINDEX

Cause
The Start index entered is invalid.

Solution
Use index in the range of 1..65535 or 100001..165535.

3.45.56 10681
Invalid Start Index. Must be 200001..265535 or 300001..365535 or 400001..465535 or 700001..765535 or
800002..865535 or 900001..965535

Error ID
ERR_CL_MBTCPNUMERIC_INVALID_STARTINDEX

Error name
CL_MBTCPNUMERIC_INVALID_STARTINDEX

1111
3 ERROR CODES

Cause
The Start index entered is invalid.

Solution
Use index in the range of 200001..265535 or 300001..365535 or 400001..465535 or 700001..765535 or
800002..865535 or 900001..965535.

3.45.57 10682
Invalid Start Index. Must be 500001..565535 or 600000..665535 or 699999

Error ID
ERR_CL_MBTCPTEXT_INVALID_STARTINDEX

Error name
CL_MBTCPTEXT_INVALID_STARTINDEX

Cause
The Start index entered is invalid.

Solution
Use index in the range of 500001..565535 or 600000..665535 or 699999.

3.45.58 10683
Invalid number of numeric. May not exceed 120.

Error ID
ERR_CL_MBTCPNUMERIC_INVALID_NNUMERIC

Error name
CL_MBTCPNUMERIC_INVALID_NNUMERIC

Cause
The number of numeric entered is invalid.

Solution
Use number that is not greater than 120.

3.45.59 10684
Invalid number of numeric. May not exceed 60.

Error ID
ERR_CL_MBTCPNUMERIC_INVALID_NNUMERIC_FLOAT

Error name
CL_MBTCPNUMERIC_INVALID_NNUMERIC_FLOAT

1112 www.honeywell.com
 3 ERROR CODES

Cause
The number of numeric entered is invalid.

Solution
Use number that is not greater than 60.

3.45.60 10685
Invalid total number of characters. May not exceed 120 for non ASCII, or 240 for ASCII.

Error ID
ERR_CL_MBTCPTEXT_INVALID_STRLEN_NSTRING

Error name
CL_MBTCPTEXT_INVALID_STRLEN_NSTRING

Cause
Convert to ASCII must be even.

Solution
Make STRLEN even.

3.45.61 10686
When Convert to ASCII is checked, the string length must be even.

Error ID
ERR_CL_MBTCPTEXT_INVALID_ASCII

Error name
CL_MBTCPTEXT_INVALID_ASCII

Cause
The number of strings entered is invalid.

Solution
Enter a number such that the number of strings should be one.

3.45.62 10687
Duplicate unit id is not allowed

Error ID
ERR_CL_MBTCPMASTER_DUPLICATE_UNIT_ID

Error name
CL_MBTCPMASTER_DUPLICATE_UNIT_ID

1113
3 ERROR CODES

Cause
A duplicate unit id is entered.

Solution
Enter a unique unit id.

3.45.63 10688
Supported command may not be zero.

Error ID
ERR_CL_MBTCPMASTER_NO_COMMAND_SUPPORTED

Error name
CL_MBTCPMASTER_NO_COMMAND_SUPPORTED

Cause
The command is zero.

Solution
Configure at least one supported command.

3.45.64 10689
Invalid IP address or port number.

Error ID
ERR_CL_MBTCPMASTER_INVALID_IP_TCP

Error name
CL_MBTCPMASTER_INVALID_IP_TCP

Cause
The IP address or port number is invalid.

Solution
Enter a correct IP address or port number.

3.45.65 10690
Invalid Unit ID. Valid IDs are 1..247. A value of 0 can be used to un-assign a device.

Error ID
ERR_CL_MBTCPMASTER_INVALID_UNIT_ID

Error name
CL_MBTCPMASTER_INVALID_UNIT_ID

1114 www.honeywell.com
 3 ERROR CODES

Cause
The unit ID is invalid. Valid ID range is 0..247. In addition, 255 is also valid for native device.

Solution
Enter a correct unit ID.

3.45.66 10691
Invalid Device Address. Valid addresses are 1..247 and 255.

Error ID
ERR_CL_MBTCPREQUESTOR_INVALID_DEV_ADDRESS

Error name
CL_MBTCPREQUESTOR_INVALID_DEV_ADDRESS

Cause
The unit ID is invalid. Valid ID range is 0..247. In addition, 255 is also valid for native device.

Solution
Enter a correct unit ID.

3.45.67 10692
Invalid Unit Id. Valid IDs are 1..247 and 255.

Error ID
ERR_CL_MBTCPMASTER_INVALID_NATIVE_UNIT_ID

Error name
CL_MBTCPMASTER_INVALID_NATIVE_UNIT_ID

Cause
The native unit ID is invalid. Valid ID range is 1..247. In addition, 255 is also valid for native device.

Solution
Enter a correct unit ID.

3.45.68 10693
Invalid IP or Port configuration. Duplicate pairs are not allowed.

Error ID
ERR_CL_MBTCPMASTER_DUPLICATE_IP_TCP

Error name
CL_MBTCPMASTER_DUPLICATE_IP_TCP

1115
3 ERROR CODES

Cause
Duplicate IP and Port entries.

Solution
Enter a correct secondary IP.

3.45.69 10694
Invalid PV Range.

Error ID
ERR_CL_MBTCPNUMERIC_INVALID_PVRANGE

Error name
CL_MBTCPNUMERIC_INVALID_PVRANGE

Cause
PV range is invalid.

Solution
Enter a correct PV range.

3.45.70 10695
Request block not assigned to a PCDI_MASTER block.

Error ID
ERR_CL_MBTCPREQUESTOR_NOTASSIGNED

Error name
CL_MBTCPREQUESTOR_NOTASSIGNED

Cause
Request block not assigned to a PCDI_MASTER block.

Solution
Assign the request block to a PCDI_MASTER block.

3.45.71 10696
Request block is read only.

Error ID
ERR_CL_MBTCPREQUESTOR_READONLY

Error name
CL_MBTCPREQUESTOR_READONLY

1116 www.honeywell.com
 3 ERROR CODES

Cause
Request block is a read only block.

Solution
None.

3.45.72 10697
String length exceeds maximum allowed.

Error ID
ERR_CL_STRLENGTMAXALLOW

Error name
CL_STRLENGTMAXALLOW

Cause
String value has length greater than maximum allowed.

Solution
Fix the incorrect value.

3.45.73 10698
Unable to get template ID. More than one template exists with the same name.

Error ID
ERR_CL_DUPLTEMPLNAMES

Error name
CL_DUPLTEMPLNAMES

Cause
While resolving cross library template references duplicate template names were found

Solution
None

3.45.74 10699
Template name qualified with library name or Embedded template name unexpected.

Error ID
ERR_CL_UNEXPECTEDTEMPLNAMES

Error name
CL_UNEXPECTEDTEMPLNAMES

1117
3 ERROR CODES

Cause
Only unqualified template names were expected.

Solution
None.

1118 www.honeywell.com
 3 ERROR CODES

3.46 Codes 10701 to 10799

Related topics
“10701” on page 1120
“10702” on page 1120
“10703” on page 1121
“10705” on page 1121
“10706” on page 1121
“10707” on page 1122
“10708” on page 1122
“10709” on page 1122
“10710” on page 1123
“10711” on page 1123
“10712” on page 1123
“10713” on page 1124
“10717” on page 1124
“10718” on page 1124
“10719” on page 1125
“10720” on page 1125
“10722” on page 1125
“10723” on page 1126
“10725” on page 1126
“10726” on page 1126
“10727” on page 1127
“10730” on page 1127
“10732” on page 1127
“10733” on page 1128
“10734” on page 1128
“10735” on page 1128
“10736” on page 1129
“10737” on page 1129
“10738” on page 1129
“10739” on page 1130
“10740” on page 1130
“10741” on page 1130
“10742” on page 1131
“10743” on page 1131
“10744” on page 1131
“10745” on page 1132
“10747” on page 1132
“10751” on page 1132
“10752” on page 1133
“10753” on page 1133
“10754” on page 1133
“10755” on page 1134
“10756” on page 1134
“10757” on page 1134

1119
3 ERROR CODES

“10758” on page 1135

“10759” on page 1135
“10760” on page 1135
“10761” on page 1136
“10783” on page 1136
“10784” on page 1136
“10785” on page 1137
“10786” on page 1137
“10787” on page 1138
“10788” on page 1138
“10789” on page 1138
“10790” on page 1139
“10791” on page 1139
“10792” on page 1139
“10793” on page 1140
“10794” on page 1140
“10795” on page 1140
“10796” on page 1141
“10797” on page 1141
“10798” on page 1141
“10799” on page 1142

3.46.1 10701
Failed to delete the Control Module.

Error ID
ERR_CL_FF_CM_DELETE_FAILED

Error name
CL_FF_CM_DELETE_FAILED

Cause
Wrapper.

Solution
None.

3.46.2 10702
Failed to Update the Loaded version of ERDB for item.

Error ID
ERR_CL_FF_MONITOR_ERDB_UPDATE_FAIL

Error name
CL_FF_MONITOR_ERDB_UPDATE_FAIL

1120 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
This is a fatal error, the block has to be reloaded.

3.46.3 10703
Unable to clear device's management objects.

Error ID
ERR_CL_FF_DEV_CLR_MGMTOBJS_FAIL

Error name
CL_FF_DEV_CLR_MGMTOBJS_FAIL

Cause
Wrapper.

Solution
None.

3.46.4 10705
VCR load to the Device failed.

Error ID
ERR_CL_FF_DEV_LOADVCR_FAIL

Error name
CL_FF_DEV_LOADVCR_FAIL

Cause
Wrapper.

Solution
None.

3.46.5 10706
Failed to load the Client VCR of item to the FIM.

Error ID
ERR_CL_CLIENT_VCR_LOAD_FAIL

Error name
CL_CLIENT_VCR_LOAD_FAIL

1121
3 ERROR CODES

Cause
Wrapper.

Solution
None.

3.46.6 10707
Fieldbus device not found.

Error ID
ERR_CL_FF_DEV_IDENTIFY_FAIL

Error name
CL_FF_DEV_IDENTIFY_FAIL

Cause
Wrapper.

Solution
None.

3.46.7 10708
Failed to clear the LINK OBJECTS of the device.

Error ID
ERR_CL_DEV_LNKOBJ_CLR_FAIL

Error name
CL_DEV_LNKOBJ_CLR_FAIL

Cause
None.

Solution
None.

3.46.8 10709
Error in assignment for block address, No Address available.

Error ID
ERR_CL_ASSIGN_DEV

Error name
CL_ASSIGNDEV

1122 www.honeywell.com
 3 ERROR CODES

Cause
Control Builder has attempted to auto-assign a device address for the block, but all of the addresses have been
used on the Link that the user wants to assign to the device.

Solution
Remove an unused device from the Link, or assign this device to a different link.

3.46.9 10710
Error in assignment for block address, address out of range.

Error ID
ERR_CL_ASSIGN_INV_DEV

Error name
CL_ASSIGNINVDEV

Cause
None.

Solution
Assign a valid address.

3.46.10 10711
Error in assignment for block address, duplicate address.

Error ID
ERR_CL_ASSIGN_DUP_DEV

Error name
CL_ASSIGNDUPDEV

Cause
The device address specified on the device configuration form has already been used on the Link that the user
wants to assign to the device.

Solution
Configure a new address.

3.46.11 10712
Cannot unassign item because device blocks are used in a CM.

Error ID
ERR_CL_CANTUNASSIGNDEV

1123
3 ERROR CODES

Error name
CL_CANTUNASSIGNDEV

Cause
The device has fieldbus block that is contained in a CM.

Solution
Remove or unassign the fieldbus block from the CM.

3.46.12 10713
Failed to process backup LAS for the device.

Error ID
ERR_CL_PROCDEVLAS_FAIL

Error name
CL_PROCDEVLAS_FAIL

Cause
The device may be off-line.

Solution
Make sure the device is online and try again.

3.46.13 10717
Failed to Load the Parameter Definition Table for block.

Error ID
ERR_CL_BLK_PARDEF_LOAD_FAIL

Error name
CL_BLK_PARDEF_LOAD_FAIL

Cause
None.

Solution
None.

3.46.14 10718
Failed to set the mode for block.

Error ID
ERR_CL_SET_MODE_FAIL

1124 www.honeywell.com
 3 ERROR CODES

Error name
CL_SET_MODE_FAIL

Cause
None.

Solution
None.

3.46.15 10719
Device data does not match the template data.

Error ID
ERR_CL_TEMPLATE_MISMATCH

Error name
CL_TEMPLATE_MISMATCH

Cause
Possible firmware or factory configuration differences.

Solution
Update firmware or check/change applicable configuration data.

3.46.16 10720
Failed to load the Communication Reference of the device.

Error ID
ERR_CL_COMM_REF_LOAD_FAIL

Error name
CL_COMM_REF_LOAD_FAIL

Cause
None.

Solution
None.

3.46.17 10722
Failed to send the ENDLOADBRACKET command to the FIM.

Error ID
ERR_CL_SEND_ENDLOAD_FAIL

1125
3 ERROR CODES

Error name
CL_SEND_ENDLOAD_FAIL

Cause
None.

Solution
None.

3.46.18 10723
Bad DEVCLASS

Error ID
ERR_CL_BAD_DEVCLASS

Error name
CL_BAD_DEVCLASS

Cause
None.

Solution
None.

3.46.19 10725
Failed to load the LINK OBJECT of the device.

Error ID
ERR_CL_DEV_LNKOBJ_LOAD_FAIL

Error name
CL_DEV_LNKOBJ_LOAD_FAIL

Cause
None.

Solution
None.

3.46.20 10726
Failed to load the SCHEDULE OBJECTS of the device.

Error ID
ERR_CL_DEV_SCHOBJ_LOAD_FAIL

1126 www.honeywell.com
 3 ERROR CODES

Error name
CL_DEV_SCHOBJ_LOAD_FAIL

Cause
None.

Solution
None.

3.46.21 10727
Failed to load the SCHEDULE DOMAIN of the device.

Error ID
ERR_CL_DEV_SCHDOM_LOAD_FAIL

Error name
CL_DEV_SCHDOM_LOAD_FAIL

Cause
None.

Solution
None.

3.46.22 10730
Errors detected while loading blocks of the device.

Error ID
ERR_CL_BLK_LOADED_WITH_ERRORS

Error name
CL_BLK_LOADED_WITH_ERRORS

Cause
None.

Solution
None.

3.46.23 10732
Unexpected error during execution of CL hooks.

Error ID
ERR_CL_FF_BLK_EXT_UNEXPECTED_ERROR

1127
3 ERROR CODES

Error name
CL_FF_BLK_EXT_UNEXPECTED_ERROR

Cause
None.

Solution
None.

3.46.24 10733
Failed to delete the fieldbus device.

Error ID
ERR_CL_FF_DEV_DELETE_FAIL

Error name
CL_FF_DEV_DELETE_FAIL

Cause
None.

Solution
None.

3.46.25 10734
Failed to get Project/Monitor device block information.

Error ID
ERR_CL_GET_PROJ_BLOCK_INFO_FAIL

Error name
CL_FF_GET_PROJ_BLOCK_INFO_FAIL

Cause
Could not read one or more parameters from ER Database

Solution
None.

3.46.26 10735
Failed to get Device block information.

Error ID
ERR_CL_GET_DEV_BLOCK_INFO_FAIL

1128 www.honeywell.com
 3 ERROR CODES

Error name
CL_FF_GET_DEV_BLOCK_INFO_FAIL

Cause
FIM or fieldbus device is not detected.

Solution
Make sure FIM or fieldbus device is connected properly.

3.46.27 10736
Will instantiate a new Block.

Error ID
WARN_CL_ADD_I_BLOCK

Error name
CL_ADD_I_BLOCK

Cause
None.

Solution
None.

3.46.28 10737
Will remove an instantiated Block.

Error ID
WARN_CL_REMOVE_I_BLOCK

Error name
CL_REMOVE_I_BLOCK

Cause
None.

Solution
None.

3.46.29 10738
Failed to remove an instantiated block.

Error ID
ERR_CL_REMOVE_INST_BLOCK_FAIL

1129
3 ERROR CODES

Error name
CL_REMOVE_INST_BLOCK_FAIL

Cause
There is a problem with removing an instantiated block in the Physical Device.

Solution
Try device load again.

3.46.30 10739
Failed to instantiate a block.

Error ID
ERR_CL_ADD_INST_BLOCK_FAIL

Error name
CL_ADD_INST_BLOCK_FAIL

Cause
There is a problem with instantiating a block in the Physical Device.

Solution
Try device load again.

3.46.31 10740
Unable to verify if Instantiable Block in the Physical Device is removed.

Error ID
ERR_CL_VERIFY_REMOVE_INST_BLOCK_FAIL

Error name
CL_VERIFY_REMOVE_INST_BLOCK_FAIL

Cause
Cannot verify that instantiated block has been removed.

Solution
Try device load again.

3.46.32 10741
Unable to verify if block was instantiated in the Physical Device.

Error ID
ERR_CL_VERIFY_ADD_INST_BLOCK_FAIL

1130 www.honeywell.com
 3 ERROR CODES

Error name
CL_VERIFY_ADD_INST_BLOCK_FAIL

Cause
Cannot verify the block has been instantiated.

Solution
Try device load again.

3.46.33 10742
Failed to trace the Connection information of this block.

Error ID
ERR_CL_CONN_TRACER_FAIL

Error name
CL_CONN_TRACER_FAIL

Cause
There is a problem in tracing the connection information.

Solution
Delete this block and remake the connections.

3.46.34 10743
Failed to update the ERDB of the block.

Error ID
ERR_CL_UPDATE_ERDB_FAIL

Error name
CL_UPDATE_ERDB_FAIL

Cause
Could not write one or more parameters to ER Database.

Solution
None.

3.46.35 10744
Need to reload the device because an associated CM was detected for loading.

Error ID
ERR_CL_ASSOC_CM_EXIST

1131
3 ERROR CODES

Error name
CL_ASSOC_CM_EXIST

Cause
Pre-load did not detect an associated CM earlier due to other device communication errors.

Solution
Reload the device.

3.46.36 10745
Contains function Block that has not been instantiated.

Error ID
ERR_CL_IBLOCK_NOT_INSTED

Error name
CL_IBLOCK_NOT_INSTED

Cause
Attempted a CM load containing a Function Block that has not been instantiated in the Physical Device

Solution
Load the device first to Instantiate this Function Block in the Physical Device.

3.46.37 10747
Cannot delete the CM

Error ID
ERR_CL_FF_BLK_DELETE_MODE

Error name
CL_FF_BLK_DELETE_MODE

Cause
Attempted to delete a CM in which FF block's MODE.ACTUAL parameter is not set to Out-Of-Service(OOS)
mode.

Solution
Before deleting or inactivating to set the FF blocks to OOS mode, you must manually set the FF block's
MODE.ACTUAL parameter to OOS mode .

3.46.38 10751
Failed to load VCR to the LINK.

1132 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FF_LINK_LOADVCR_FAIL

Error name
CL_FF_LINK_LOADVCR_FAIL

Cause
None.

Solution
None.

3.46.39 10752
Link does not exist.

Error ID
ERR_CL_FF_LINK_DOESNOT_EXIST

Error name
CL_FF_LINK_DOESNOT_EXIST

Cause
None.

Solution
None.

3.46.40 10753
Cannot drop fieldbus block onto chart.

Error ID
ERR_CL_DEVNOTASSIGNED

Error name
CL_DEVNOTASSIGNED

Cause
Its device must be assigned to a Link.

Solution
Assign the device to a link.

3.46.41 10754
Cannot drop fieldbus block onto the chart.

1133
3 ERROR CODES

Error ID
ERR_CL_CONTNOTCOMPATIBLE

Error name
CL_CONTNOTCOMPATIBLE

Cause
The chart is not a CM.

Solution
None - Drop the block onto a CM.

3.46.42 10755
Cannot drop fieldbus block onto the chart.

Error ID
ERR_CL_BLKASSGNDTOCM

Error name
CL_BLKASSGNDTOCM

Cause
The block is already contained by the chart.

Solution
None.

3.46.43 10756
The device address cannot be changed.

Error ID
ERR_CL_FF_DEV_VALD_BBLKCONTAINED

Error name
CL_FF_DEV_VALD_BBLKCONTAINED

Cause
The basic block(s) of the device is currently in use.

Solution
None.

3.46.44 10757
The device address cannot be changed.

1134 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FF_DEV_VALD_DUPLICATEADDR

Error name
CL_FF_DEV_VALD_DUPLICATEADDR

Cause
The address specified has already been used or the address is in the temporary/visitor device address area.

Solution
Configure another valid address.

3.46.45 10758
The device address cannot be changed.

Error ID
ERR_CL_FF_DEV_VALD_DEVLOADED

Error name
CL_FF_DEV_VALD_DEVLOADED

Cause
The device has already been loaded.

Solution
None.

3.46.46 10759
Schedule Information will load from Monitor side of Control Builder

Error ID
WARNING_CL_FF_LINK_SCH_RELOAD

Error name
CL_FF_LINK_SCH_RELOAD

Cause
None.

Solution
None.

3.46.47 10760
The device cannot be loaded because the device seeding failed

1135
3 ERROR CODES

Error ID
ERR_CL_FF_DEV_VALD_SEED_FAILED

Error name
CL_FF_DEV_VALD_SEED_FAILED

Cause
Could not create the device in simulation

Solution
Try device load again

3.46.48 10761

Error ID
WARNING_CL_FF_DEV_ADVALARM_CONFIGRD

Error name
CL_FF_DEV_ADVALARM_CONFIGRD

Cause
Both advanced alarms and Field Diagnostics are configured for the device

Solution
It is recommended to use either one of these configuration for device diagnostics.

3.46.49 10783
Warning: Block exec. time will increase ms

Error ID
ERR_CL_FF_UDR_LONGER_BLK_EXECTIME

Error name
CL_FF_UDR_LONGER_BLK_EXECTIME

Cause
The replacement block has a longer execution time, thus it will affect the Link schedule, possibly causing the
schedule to become invalid for the configured macro cycle times.

Solution
Select a different replacement device type, or increase the macro cycle time(s) of affected CMs if necessary.

3.46.50 10784
Warning: Device class will downgrade to Basic

1136 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FF_UDR_DEVCLASS_DOWNGRADE

Error name
CL_FF_UDR_DEVCLASS_DOWNGRADE

Cause
The replaced device was configured as Link master but the replacement device type cannot handle the resulting
link schedule. Therefore, the device will automatically be re-configured as a Basic device during replacement.

Solution
Select a replacement device type with sufficient link schedule capabilities to handle the schedule.

3.46.51 10785
Error: Insufficient number of VCR's

Error ID
ERR_CL_FF_UDR_INSUFFICIENT_VCRS

Error name
CL_FF_UDR_INSUFFICIENT_VCRS

Cause
For Unlike Device Replacement the replacement device does not have enough VCR's to support the current
configuration of the device to be replaced

Solution
Select a different replacement device, or reduce the VCR (connection) usage for the device to be replaced.

3.46.52 10786
Error: Insufficient number of Link Objects

Error ID
ERR_CL_FF_UDR_INSUFFICIENT_LINK_OBJECTS

Error name
CL_FF_UDR_INSUFFICIENT_LINK_OBJECTS

Cause
For Unlike Device Replacement the replacement device does not have enough Link Objects to support the
current configuration of the device to be replaced

Solution
Select a different replacement device, or reduce the Link Object (connection) usage for the device to be
replaced.

1137
3 ERROR CODES

3.46.53 10787
Warning: Loss of LAS capability

Error ID
ERR_CL_FF_UDR_LOSS_OF_LAS_WARNING

Error name
CL_FF_UDR_LOSS_OF_LAS_WARNING

Cause
For Unlike Device Replacement the replacement device does not LAS capability although the device to be
replaced is configured as a backup LAS device.

Solution
Select a different replacement device which has LAS capability, or first configure the device not to be a backup
LAS device.

3.46.54 10788
Error: Cannot replace loaded device - delete from Monitor side first

Error ID
ERR_CL_FF_UDR_DEVICE_LOADED

Error name
CL_FF_UDR_DEVICE_LOADED

Cause
The device selected for replacement is currently loaded to the monitor side

Solution
Delete the device from Monitor side first and re-attempt the replacement. This may require deleting one or more
associated CM's on the Monitor side also, or the user may delete the device's function blocks from CM's on the
Project side and re-load the CM's

3.46.55 10789
Error: Block does not have a match in the new device type

Error ID
ERR_CL_FF_UDR_BLOCK_LOSS_ERROR

Error name
CL_FF_UDR_BLOCK_LOSS_ERROR

1138 www.honeywell.com
 3 ERROR CODES

Cause
A block in the replaced device that is contained in a CM does not have a matching block in the replacement
device type.

Solution
Select a more compatible replacement device type, or alter the control configuration to assign the block to
another device

3.46.56 10790
Error: Replacement device has insufficient FB Start entries

Error ID
ERR_CL_FF_UDR_FBSTRENT_ERROR

Error name
CL_FF_UDR_FBSTRENT_ERROR

Cause
The current configuration generates a number of FB Start entries in the original device which the replacement
device type cannot support

Solution
Select another more compatible replacement device type, or alter the control configuration to reduce the number
of FB Start entries

3.46.57 10791
Error: Replacement device has incorrect number of VFD's

Error ID
ERR_CL_FF_UDR_VFD_ERROR

Error name
CL_FF_UDR_VFD_ERROR

Cause
The replacement device type does not have exactly two (2) VFD's.

Solution
Select another more compatible replacement device type

3.46.58 10792
Warning: Replacing device with same model but older version

Error ID
ERR_CL_FF_UDR_OLDER_DEV_WARNING

1139
3 ERROR CODES

Error name
CL_FF_UDR_OLDER_DEV_WARNING

Cause
The replacement device type is the same model as the device being replaced, but the model is older. This may
result in a loss of functionality.

Solution
Ensure the replacement has the necessary functionality, and/or select another more compatible replacement
device type

3.46.59 10793
Warning: Replacement device has fewer VCR's available

Error ID
ERR_CL_FF_UDR_FEWER_VCR_WARNING

Error name
CL_FF_UDR_FEWER_VCR_WARNING

Cause
Although the replacement device type has sufficient VCR's for the current configuration, it have fewer total
VCR's available for configuration. This may limit future configuration capabilities

Solution
Select another more compatible replacement device type if desired.

3.46.60 10794
Warning: Replacement device has fewer Link Objects available

Error ID
ERR_CL_FF_UDR_FEWER_LINK_OBJ_WARNING

Error name
CL_FF_UDR_FEWER_LINK_OBJ_WARNING

Cause
Although the replacement device type has sufficient link objects for the current configuration, it has fewer total
link objects available for configuration. This may limit future configuration capabilities.

Solution
Select another more compatible replacement device type if desired

3.46.61 10795
Warning: Block will lose parameter

1140 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FF_UDR_PARAMETER_LOSS_WARNING

Error name
CL_FF_UDR_PARAMETER_LOSS_WARNING

Cause
An unused parameter does not exist in the replacement device. The original device had blocks that contained
manufacturer-added parameters and the replacement device does not have the same ones.

Solution
elect another more compatible replacement device type if desired

3.46.62 10796
Success! Unlike Template Replacement succeeded for the device template

Error ID
ERR_CL_FF_UDR_OPER_SUCCEEDED

Error name
CL_FF_UDR_OPER_SUCCEEDED

Cause
UDR Operation succeeded for the selected device.

Solution
None

3.46.63 10797
Success! Validation succeeded for the device template

Error ID
ERR_CL_FF_UDR_VALIDATION_SUCCEEDED

Error name
CL_FF_UDR_VALIDATION_SUCCEEDED

Cause
UDR Validation succeeded for the selected control

Solution
None

3.46.64 10798
Warning: Replacement device has fewer FB Start entries

1141
3 ERROR CODES

Error ID
ERR_CL_FF_UDR_FEWER_FBSTART_WARNING

Error name
CL_FF_UDR_FEWER_FBSTART_WARNING

Cause
The replacement device has fewer total FB start entries, although this should not affect current configuration

Solution
None

3.46.65 10799
Error: The Connection will be lost

Error ID
ERR_CL_FF_UDR_CONNLOSS

Error name
CL_FF_UDR_CONNLOSS

Cause
Unlike Template Replacement validation result: Connection will be deleted.

Solution
Select different template as a replacement or deselect the template to proceed for Unlike Template Replacement.

1142 www.honeywell.com
 3 ERROR CODES

3.47 Codes 10801 to 1089

Related topics
“10801” on page 1144
“10802” on page 1144
“10803” on page 1145
“10804” on page 1145
“10805” on page 1145
“10806” on page 1146
“10807” on page 1146
“10808” on page 1146
“10809” on page 1147
“10810” on page 1147
“10811” on page 1147
“10812” on page 1148
“10813” on page 1148
“10814” on page 1148
“10821” on page 1149
“10822” on page 1149
“10823” on page 1149
“10824” on page 1150
“10825” on page 1150
“10826” on page 1150
“10827” on page 1151
“10832” on page 1151
“10850” on page 1151
“10851” on page 1152
“10852” on page 1152
“10853” on page 1152
“10854” on page 1153
“10855” on page 1153
“10856” on page 1153
“10857” on page 1154
“10858” on page 1154
“10859” on page 1154
“10860” on page 1155
“10861” on page 1155
“10862” on page 1155
“10863” on page 1156
“10864” on page 1156
“10865” on page 1156
“10866” on page 1157
“10867” on page 1157
“10868” on page 1157
“10869” on page 1158
“10870” on page 1158
“10871” on page 1158

1143
3 ERROR CODES

“10872” on page 1159

“10873” on page 1159
“10874” on page 1159
“10875” on page 1160
“10876” on page 1160
“10877” on page 1160
“10878” on page 1161
“10880” on page 1161
“10881” on page 1161
“10882” on page 1162
“10883” on page 1162
“10884” on page 1162
“10885” on page 1163
“10886” on page 1163
“10887” on page 1163
“10888” on page 1164
“10889” on page 1164
“10890” on page 1164
“10891” on page 1165
“10892” on page 1165
“10893” on page 1165
“10895” on page 1166
“10896” on page 1166
“10897” on page 1166
“10898” on page 1167
“10899” on page 1167

3.47.1 10801
Failed to load CM.

Error ID
ERR_CL_FF_CM_LOAD_FAIL

Error name
>CL_FF_CM_LOAD_FAIL

Cause
None.

Solution
None.

3.47.2 10802
Failed during CM initialization.

Error ID
ERR_CL_FF_CM_INITFAILED

1144 www.honeywell.com
 3 ERROR CODES

Error name
>CL_FF_CM_INITFAILED

Cause
None.

Solution
None.

3.47.3 10803
Failed to load the block.

Error ID
ERR_CL_FF_BLK_LOAD_FAILED

Error name
>CL_FF_BLK_LOAD_FAILED

Cause
None.

Solution
None.

3.47.4 10804
Failed to load the Device Data.

Error ID
ERR_CL_FF_CM_DEV_LOAD_FAILED

Error name
>CL_FF_CM_DEV_LOAD_FAILED

Cause
None.

Solution
None.

3.47.5 10805
None.

Error ID
ERR_CL_FF_CM_INVALID_SCHEDOBJ

1145
3 ERROR CODES

Error name
None.

Cause
None.

Solution
None.

3.47.6 10806
Failed to load Schedule for the CM.

Error ID
ERR_CL_FF_CM_SCH_LOAD_FAIL

Error name
>CL_FF_CM_SCH_LOAD_FAIL

Cause
None.

Solution
None.

3.47.7 10807
None.

Error ID
ERR_CL_LNK_AGENT_LOAD_FAIL

Error name
None.

Cause
None.

Solution
None.

3.47.8 10808
Not enough LAS sub-schedules.

Error ID
ERR_CL_SUBSCHED

1146 www.honeywell.com
 3 ERROR CODES

Error name
>CL_SUBSCHED

Cause
Device has less sub-schedules than are needed to hold generated schedule.

Solution
None. Device should be reconfigured and restarted as basic device.

3.47.9 10809
LAS storage size is insufficient.

Error ID
ERR_CL_LAS_SIZE

Error name
>CL_LAS_SIZE

Cause
Device does not support LAS of this size.

Solution
None. Device should be reconfigured and restarted as basic device.

3.47.10 10810
Failed to read fieldbus schedule data from Engineering Repository (ER).

Error ID
ERR_CL_SCHED_READ

Error name
>CL_SCHED_READ

Cause
Problem in communication with ER.

Solution
Make sure ERDB is on-line.

3.47.11 10811
Failed to write fieldbus schedule data to Engineering Repository (ER).

Error ID
ERR_CL_SCHED_WRITE

1147
3 ERROR CODES

Error name
>CL_SCHED_WRITE

Cause
Problem in communication with ER.

Solution
Make sure ERDB is on-line.

3.47.12 10812
Fieldbus schedule exceeds macro cycle.

Error ID
ERR_CL_SCHED_TOOBIG

Error name
>CL_SCHED_TOOBIG

Cause
Either CMs are executing too fast or there are too many of them on a link.

Solution
Re-assign some CMs to other links or configure them to run slower.

3.47.13 10813
Number of Function Block Schedule Objects in the device is not sufficient.

Error ID
ERR_CL_INSUFF_FBSCH_OBJS

Error name
>CL_INSUFF_FBSCH_OBJS

Cause
The schedule generated uses more number of FBSTRENT objects than available in the device.

Solution
Delete few connections associated with this device.

3.47.14 10814
Control Module (CM) Loaded With ERRORS.

Error ID
ERR_CL_CM_LOADED_WITH_ERRORS

1148 www.honeywell.com
 3 ERROR CODES

Error name
>CL_CM_LOADED_WITH_ERRORS

Cause
Either CMs are executing too fast or there are too many of them on a link.

Solution
Re-assign some CMs to other links or configure them to run slower.

3.47.15 10821
Another WSG exists with the specified IP Address.

Error ID
ERR_CL_DUPLICATE_IP_ADDRESS

Error name
>DUPLICATE_IP_ADDRESS

Cause
Other WSG uses the same address already

Solution
Change the IP Address without duplication

3.47.16 10822
Another WSG has been selected as the default gateway.

Error ID
ERR_CL_DEFAULT_GW_ALREADY_SET

Error name
>DEFAULT_GW_ALREADY_SET

Cause
Other WSG has already been set as the Default GateWay

Solution
None

3.47.17 10823
Warning: The default gateway WSG has not been loaded. Wireless devices will not be able to join the network.

Error ID
WARN_CL_DEFAULT_GW_NOT_LOADED

1149
3 ERROR CODES

Error name
>DEFAULT_GW_NOT_LOADED

Cause
None.

Solution
None.

3.47.18 10824
Warning: You are deleting the default gateway WSG. Wireless devices will not be able to join the network.

Error ID
WARN_CL_DELETE_DEFAULT_GW

Error name
>DELETE_DEFAULT_GW

Cause
None.

Solution
None.

3.47.19 10825
Configuration error on the Transducer Block's OUTCONN.PERIOD of the device.

Error ID
ERR_CL_CONFIG_OUTCONN_PERIOD

Error name
>CONFIG_OUTCONN_PERIOD

Cause
All the Transducer Block's OUTCONN.PERIOD is not configured.

Solution
Configure at least one of the Transducer Block's OUTCONN.PERIOD.

3.47.20 10826
Verify DUTY_CYCLE.PERIOD not successfully loaded to the device.

Error ID
WARN_CL_DUTY_CYCLE_NOT_LOADED

1150 www.honeywell.com
 3 ERROR CODES

Error name
>DUTY_CYCLE_NOT_LOADED

Cause
The device may not be able to accept the newly downloaded DYTYCYCLE_PERIOD.

Solution
Modify the Transducer Block's OUTCONN.PERIOD from Offline in Wireless Builder and reload the device.

3.47.21 10827
AIL Client request returned error code = <systemdefined>

Error ID
ERR_CL_AIL_CLIENT_ERROR_CODE

Error name
>AIL_CLIENT_ERROR_CODE

Cause
The AIL Client request is returned error from Directory or Key Server.

Solution
Make sure the Directory or Key Server is started and running.

3.47.22 10832
Illegal Redundant COM Port

Error ID
ERR_CL_ILLEGAL_REDUNDANT_COMPORT

Error name
>CL_ILLEGAL_COMPORT

Cause
WSG function block is configured as redundant but redundant COM port value entered is not a legal value.

Solution
Either specify valid redundant COM port or re-configure WSG function block as non-redundant.

3.47.23 10850
The number of free LINK VCRs is getting low. See Error Log for more information.

Error ID
WARN_CL_FF_LINKVCR_LOW

1151
3 ERROR CODES

Error name
>CL_FF_LINKVCR_LOW

Cause
The availabe Link VCRs is getting low.

Solution
Free Link VCRs by removing UCDs from the link, removing devices from the Project or commissioning the
device.

3.47.24 10851
No Link Objects or Agents Available.

Error ID
ERR_CL_FF_NO_AVAIL_VCRS

Error name
>CL_FF_NOAVAILVCRS

Cause
No more VCRs available for use in FIM or on fieldbus Device.

Solution
May be able to reload some fieldbus blocks to free resources.

3.47.25 10852
No VCRs Available.

Error ID
ERR_CL_FF_NO_AVAIL_LNKOBJS

Error name
>CL_FF_NOAVAILLNKOBJS

Cause
No more Link Objects or Agents available in FIM or on fieldbus Device.

Solution
May be able to reload some fieldbus blocks to free resources.

3.47.26 10853
Fieldbus Link block cannot be read from Engineering Repository (ER) Database.

Error ID
ERR_CL_FF_CANT_LOAD_LINK_BLOCK

1152 www.honeywell.com
 3 ERROR CODES

Error name
>CL_FF_CANTLOADLINKBLOCK

Cause
A reference exists to a block that does not exist.

Solution
Delete the reference.

3.47.27 10854
Agent Block cannot be found for deletion.

Error ID
ERR_CL_FF_AGENT_NOT_FOUND

Error name
>CL_FF_AGENTNOTFOUND

Cause
The agent block involved in a connection cannot be located.

Solution
None.

3.47.28 10855
Agent Block is of wrong type for deletion.

Error ID
ERR_CL_FF_WRONG_AGENT_TYPE

Error name
>CL_FF_WRONGAGENTTYPE

Cause
The agent block involved in a connection is of wrong type.

Solution
None.

3.47.29 10856
Link Object cannot be found for deletion.

Error ID
ERR_CL_FF_LNKOBJ_NOT_FOUND

1153
3 ERROR CODES

Error name
>CL_FF_LNKOBJNOTFOUND

Cause
The Link Object involved in a connection cannot be located.

Solution
None.

3.47.30 10857
Link Object is of wrong type for deletion.

Error ID
ERR_CL_FF_WRONG_LNKOBJ_TYPE

Error name
>CL_FF_WRONGLNKOBJTYPE

Cause
The Link Object involved in a connection is for wrong operation type.

Solution
None.

3.47.31 10858
Connection not allowed to a Control Module (CM) assigned to a fieldbus Link.

Error ID
ERR_CL_FF_NO_CONN_TO_CM_ON_LINK

Error name
>CL_FF_NOCONNTOCMONLINK

Cause
Tried to make a connection to a CM that doesn't exist in a controller.

Solution
None.

3.47.32 10859
No connection allowed per parameter specification.

Error ID
ERR_CL_FF_WRONG_PIN_EXPOSURE_TYPE

1154 www.honeywell.com
 3 ERROR CODES

Error name
>CL_FF_WRONGPINEXPOSURETYPE

Cause
The parameter specification does not allow a connection.

Solution
May be able to modify DD file?

3.47.33 10860
Cannot connect to fieldbus contained parameter.

Error ID
ERR_CL_FF_CANT_CONNECT_CONTAINED

Error name
>CL_FF_CANTCONNECTCONTAINED

Cause
Parameter is a 'contained' parameter; cannot connect to it.

Solution
None.

3.47.34 10861
Input parameter is not a fieldbus IN parameter.

Error ID
ERR_CL_FF_PARAM_NOT_INPUT

Error name
>CL_FF_PARAMNOTINPUT

Cause
Input parameter must be an IN parameter.

Solution
Connect to a different parameter.

3.47.35 10862
Output parameter is not a fieldbus OUT parameter.

Error ID
ERR_CL_FF_PARAM_NOT_OUTPUT

1155
3 ERROR CODES

Error name
>CL_FF_PARAMNOTOUTPUT

Cause
Output parameter must be an OUT parameter.

Solution
Connect to a different parameter.

3.47.36 10863
Connection allowed only when local to fieldbus device.

Error ID
ERR_CL_FF_CONN_ALLOWED_LOCAL_ONLY

Error name
>CL_FF_CONNALLOWEDLOCALONLY

Cause
Output side can be input only if connection is local.

Solution
Find local block for connection or connect to a different parameter.

3.47.37 10864
Cannot connect - must be on same fieldbus Link.

Error ID
ERR_CL_FF_NOT_SAME_LINK

Error name
>CL_FF_NOTSAMELINK

Cause
Cannot connect two fieldbus devices on a different link.

Solution
Move data using connections from C200 controller.

3.47.38 10865
Parameter must be of FieldBus type DS65/66/67.

Error ID
ERR_CL_FF_NOT_DS65_OR_DS66

1156 www.honeywell.com
 3 ERROR CODES

Error name
>CL_FF_NOTDS65ORDS66

Cause
Can only connect to structure parameters in this case.

Solution
Connect to a different parameter or use connection from C200 controller.

3.47.39 10866
Cannot pull into a fieldbus OUT parameter.

Error ID
ERR_CL_FF_CANT_PULL_INTO_OUT_PARAM

Error name
>CL_FF_CANTPULLINTOOUTPARAM

Cause
None.

Solution
Connect to a different parameter or use connection from C200 controller.

3.47.40 10867
Cannot pull into a fieldbus device parameter.

Error ID
ERR_CL_FF_CANT_PULL_INTO_DEV_PARAM

Error name
>CL_FF_CANTPULLINTODEVPARAM

Cause
None.

Solution
Connect to a different parameter or use connection from C200 controller.

3.47.41 10868
No backcalc data available when pushing to fieldbus block.

Error ID
ERR_CL_FF_NO_BACKCALC

1157
3 ERROR CODES

Error name
>CL_FF_NOBACKCALC

Cause
Part of connection is expecting backcalc data, which is not available in this case.

Solution
Connect to a different parameter.

3.47.42 10869
Cannot push to fieldbus OUT parameter.

Error ID
ERR_CL_FF_CANT_PUSH_INTO_OUT_PARAM

Error name
>CL_FF_CANTPUSHINTOOUTPARAM

Cause
Trying to push into a fieldbus OUT parameter.

Solution
Connect to a different parameter or use connection from C200 controller.

3.47.43 10870
Link object for backcalc data used by multiple connections.

Error ID
ERR_CL_FF_LNKOBJ_IMPROPERLY_USED

Error name
>CL_FF_LNKOBJIMPROPERLYUSED

Cause
Link object used for multiple connections - should be illegal.

Solution
None.

3.47.44 10871
Fieldbus Block cannot be Cascade Primary in this case.

Error ID
ERR_CL_FF_INVALID_CASC_SECNDRY

1158 www.honeywell.com
 3 ERROR CODES

Error name
>CL_FF_INVALIDCASCSECNDRY

Cause
Cascade set up incorrectly - Fieldbus block cannot be primary to a Controller Secondary.

Solution
Rearrange cascade loop.

3.47.45 10872
Fieldbus Block is unassigned - make partial connection.

Error ID
ERR_CL_FF_BLK_UNASSIGNED

Error name
>CL_FF_BLKUNASSIGNED

Cause
Fieldbus Block is unassigned - full connection will be made when block is assigned.

Solution
None.

3.47.46 10873
Maximum value of output is greater than allowed by input - potential truncation.

Error ID
ERR_CL_FF_POTENTIAL_TRUNCATION

Error name
>CL_FF_POTENTIALTRUNCATION

Cause
Data type of output has more significant bits than input parameter.

Solution
None.

3.47.47 10874
Output data already subscribed to by block in same device.

Error ID
ERR_CL_FF_ALREADY_SUBSCRIBED

1159
3 ERROR CODES

Error name
>CL_FF_ALREADYPUBL

Cause
Output data is already being published and is subscribed to by a block in same device.

Solution
Build a device-local connection to the input parameter that is already subscribing to the desired data.

3.47.48 10875
Exceeds Instantiable blocks limit for this device.

Error ID
ERR_CL_FF_DEV_CAPACITY_EXCEEDED

Error name
CL_FF_DEV_CAPACITY_EXCEEDED

Cause
This Project device has reached maximum Instantiable blocks capacity limit.

Solution
Delete some of the Instantiable blocks for this Project device.

3.47.49 10876
Exceeds Instantiable block type limit for this device.

Error ID
ERR_CL_FF_BLK_CAPACITY_EXCEEDED

Error name
CL_FF_BLK_CAPACITY_EXCEEDED

Cause
This Project device has reached maximum Instantiable blocks capacity limit for given type.

Solution
Delete some of the Instantiable blocks of the type for this Project device.

3.47.50 10877
Internal Error cannot find Instantiable block.

Error ID
ERR_CL_FF_IBLK_DOESNOTEXIST

1160 www.honeywell.com
 3 ERROR CODES

Error name
CL_FF_IBLK_DOESNOTEXIST

Cause
An unexpected exception has occured when trying to access this block.

Solution
None.

3.47.51 10878
No resources available.

Error ID
ERR_CL_FF_NO_AVAIL_RES

Error name
CL_FF_NO_AVAIL_RES

Cause
When trying to add the instantiable block from the library to the device the device has exceeded its resource
limit.

Solution
Remove some of the instantiable blocks to free the resources.

3.47.52 10880
Invalid value. Value should be 0 or multiple of 8

Error ID
ERR_CL_ADS8_ILLEGALPARAMVAL

Error name
CL_ADS8_ILLEGALPARAMVAL

Cause
When trying to enter value which is not multiple of 8

Solution
Enter a number that is multiple of 8

3.47.53 10881
Only Thermocouple and Pyrometer are allowed for Channel 15 when Channel 16 is set to Carbon Potential

Error ID
ERR_CL_UAIM_ONLYTPIN15IF16CP

1161
3 ERROR CODES

Error name
CL_UAIM_ONLYTPIN15IF16CP

Cause
When trying to enter value other than Thermocouple and Pyrometer for Channel 15 when Channel 16 is set to
Carbon Potential.

Solution
Enter Thermocouple and Pyrometer in channel 15

3.47.54 10882
CL_UAIM_CPONLYFOR16

Error ID
ERR_CL_UAIM_CPONLYFOR16

Error name
Carbon Potential is valid only for channel 16

Cause
When trying to enter Carbon Potential for channel 1 to 15

Solution
Enter other than Carbon Potential for channel 1 to 15

3.47.55 10883
Characterization - Linear or Square Root is incompatible with Signal Range - Direct

Error ID
ERR_CL_UAIM_INCOM_LIORSQ_DIR

Error name
CL_UAIM_INCOM_LIORSQ_DIR

Cause
When trying to enter Characterization as Linear or Square Root when signal range is Direct
or
When trying to enter signal range as Direct when Characterization is Linear or Square Root

Solution
Enter compatible values

3.47.56 10884
NA is not Allowed When Thermocouple and Direct are Selected

1162 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_UAIM_NA_NOTALLOWED

Error name
CL_UAIM_NA_NOTALLOWED

Cause
When trying to enter NA for burnoutselect When Thermocouple and Direct are Selected

Solution
Enter On or OFF for burnoutselect when Thermocouple and Direct are Selected

3.47.57 10885
Cannot change: must delete from loaded first

Error ID
ERR_CL_DEL_FROM_LOADED

Error name
CL_FF_CM_SCH_LOAD_FAIL

Cause
When trying to enter value when IOM is already loaded

Solution
Delete from loaded and then change the value

3.47.58 10886
Cannot load SLINK separately: Load LIOM to load SLINKs

Error ID
ERR_CL_SLINK_LOADED

Error name
CL_SLINK_LOADED

Cause
When trying to load SLINK separately

Solution
Load LIOM to load SLINKs

3.47.59 10887
RTD Type is invalid for selected Alpha.

1163
3 ERROR CODES

Error ID
ERR_CL_ALPHARTDTYPE_INVALID

Error name
CL_ALPHARTDTYPE_INVALID

Cause
When Selected combination for Alpha and RTD Type is invalid.

Solution
Select Valid combination.

3.47.60 10888
Current Scans Per Sec exceeds module capability. Reconfigure Scan times.

Error ID
ERR_CL_SCAN_EXCEEDED

Error name
CL_SCAN_EXCEEDED

Cause
When Scans Per Sec exceeds module capability

Solution
Reconfigure Scan times.

3.47.61 10889
Processing Unit selected is invalid for this channel configuration.

Error ID
ERR_CL_PUNIT_INVALID

Error name
CL_PUNIT_INVALID

Cause
When Processing Unit selected is invalid for this channel configuration

Solution
Select valid processing unit

3.47.62 10890
Cannot trace connection related Link Objects or Agents.

1164 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FF_LINKOBJ_NOT_TRACED

Error name
CL_FF_LinkOBJ_NOT_TRACED

Cause
The Connection info was incorrect or corrupt.

Solution
None.

3.47.63 10891
The connection related Link Objects or Agents were wrong type.

Error ID
ERR_CL_FF_TRACE_WRONG_LNKOBJ_TYPE

Error name
CL_FF_WRONG_LinkOBJ_TYPE

Cause
The connection information or LinkObj were incorrect or corrupt.

Solution
None.

3.47.64 10892
Deletion of CM assigned to LIOM EE is not allowed when sync state of LIOM is SYNCINPROG.

Error ID
ERR_CL_LIOM_SYNC_INPROG

Error name
CL_LIOM_SYNC_INPROG

Cause
Deletion of CM assigned to LIOM EE is attempted when sync state of LIOM is SYNCINPROG

Solution
Attempt deletion of CM when sync state of LIOM is not SYNCINPROG

3.47.65 10893
Deletion of CM assigned to LIOM EE is not allowed when sync state of LIOM is SYNCINPROG.

1165
3 ERROR CODES

Error ID
ERR_CL_PRI_DEVICE_INDEX_NOT_ODD

Error name
CL_PRI_DEVICE_INDEX_NOT_ODD

Cause
Deletion of CM assigned to LIOM EE is attempted when sync state of LIOM is SYNCINPROG

Solution
None.

3.47.66 10895
Cannot perform the operation while loaded in Monitor.

Error ID
ERR_CL_BLOCK_LOADED_IN_MONITOR

Error name
CL_BLOCK_LOADED_IN_MONITOR

Cause
None.

Solution
None.

3.47.67 10896
A duplicate Secondary name condition has been detected. If you would like to correct this issue: Close and
reopen the form and make controller redundant and rename the primary.

Error ID
ERR_CL_GENERATED_SEC_NAME_NOT_UNIQUE

Error name
CL_GENERATED_SEC_NAME_NOT_UNIQUE

Cause
None.

Solution
None.

3.47.68 10897
Secondary Block cannot be deleted directly. It can be deleted by deleting the associated primary.

1166 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_SEC_BLOCKDELETION

Error name
CL_SEC_BLOCKDELETION

Cause
The selected block is defined as origin block, it cannot be deleted or uncontained.

Solution
Redefine (including empty) the origins of projected parameters defined using the selected block as the origin
block.

3.47.69 10898
Device Index for non-redundant or primary block should be odd.

Error ID
ERR_CL_DEVICE_INDEX_NOT_ODD

Error name
CL_DEVICE_INDEX_NOT_ODD

Cause
The device index for Primary or non-redundant block should be odd.

Solution
Give an Odd Device Index

3.47.70 10899
This operation is not supported on redundant module.

Error ID
ERR_CL_OP_NOT_SUPPORTED_IN_RED

Error name
CL_OP_NOT_SUPPORTED_IN_RED

Cause
The function block is configured as redundant.

Solution
Make the block non-redundant, or not perform this operation.

1167
3 ERROR CODES

3.48 Codes 10901 to 10999

Related topics
“10901” on page 1170
“10902” on page 1170
“10903” on page 1170
“10904” on page 1171
“10905” on page 1171
“10906” on page 1171
“10907” on page 1172
“10908” on page 1172
“10909” on page 1172
“10910” on page 1173
“10911” on page 1173
“10912” on page 1173
“10913” on page 1174
“10914” on page 1174
“10915” on page 1174
“10916” on page 1175
“10917” on page 1175
“10918” on page 1175
“10919” on page 1176
“10920” on page 1176
“10921” on page 1176
“10922” on page 1177
“10923” on page 1177
“10924” on page 1177
“10925” on page 1178
“10926” on page 1178
“10927” on page 1178
“10928” on page 1179
“10929” on page 1179
“10930” on page 1179
“10931” on page 1180
“10932” on page 1180
“10933” on page 1180
“10934” on page 1181
“10935” on page 1181
“10936” on page 1181
“10937” on page 1182
“10938” on page 1182
“10939” on page 1182
“10940” on page 1183
“10941” on page 1183
“10942” on page 1183
“10943” on page 1184
“10944” on page 1184

1168 www.honeywell.com
 3 ERROR CODES

“10945” on page 1184

“10946” on page 1185
“10947” on page 1185
“10948” on page 1185
“10949” on page 1186
“10951” on page 1186
“10952” on page 1186
“10953” on page 1187
“10954” on page 1187
“10955” on page 1187
“10956” on page 1188
“10957” on page 1188
“10958” on page 1188
“10959” on page 1189
“10960” on page 1189
“10961” on page 1189
“10962” on page 1190
“10963” on page 1190
“10966” on page 1190
“10968” on page 1191
“10969” on page 1191
“10970” on page 1191
“10971” on page 1192
“10972” on page 1192
“10973” on page 1192
“10974” on page 1193
“10975” on page 1193
“10976” on page 1193
“10977” on page 1194
“10978” on page 1194
“10979” on page 1194
“10980” on page 1195
“10981” on page 1195
“10982” on page 1195
“10983” on page 1196
“10984” on page 1196
“10985” on page 1196
“10986” on page 1197
“10987” on page 1197
“10988” on page 1198
“10989” on page 1198
“10990” on page 1198
“10991” on page 1199
“10992” on page 1199
“10993” on page 1199
“10994” on page 1200
“10995” on page 1200
“10996” on page 1200

1169
3 ERROR CODES

“10997” on page 1201

“10998” on page 1201
“10999” on page 1201

3.48.1 10901
No RM was found in the list of blocks submitted for migration.

Error ID
ERR_CL_NORMFOUNDFOROPM

Error name
CL_NORMFOUNDFOROPM

Cause
Error is not expected. A redundant chassis configuration requires Redundancy Modules.

Solution
Call Technical Assistance.

3.48.2 10902
RM is not in the required state for migration.

Error ID
ERR_CL_AUTOSYNCNOTCOND

Error name
CL_AUTOSYNCNOTCOND

Cause
The RM was not in the auto qualification conditional / disabled state.

Solution
Need to have the RM set to conditional auto-qual and synchronized before starting OPM. If auto-qualification
was set to ALWAYS, could not disable auto-qualification by sending disqualify secondary command.

3.48.3 10903
Primary RM was not able to synchronize after migration upgrade. Timeout occured.

Error ID
ERR_CL_CANTSYNCRM

Error name
CL_CANTSYNCRM

1170 www.honeywell.com
 3 ERROR CODES

Cause
This will occur if the RM rejects the initiate qualification command after the firmware upgrade.

Solution
Initiating synchronization might recover, but this is on a case-by-case basis.

3.48.4 10904
Primary CPM was not able to synchronize after migration upgrade. Timeout occurred.

Error ID
ERR_CL_CANTSYNCCPM

Error name
CL_CANTSYNCCPM

Cause
None.

Solution
Initiating synchronization might recover, but this is on a case-by-case basis.

3.48.5 10905
Wizard attempted to retrieve data before data is available.

Error ID
ERR_CL_MIGWIZNOTDONE

Error name
CL_MIGWIZNOTDONE

Cause
None.

Solution
None.

3.48.6 10906
This block cannot be migrated.

Error ID
ERR_CL_CANT_MIGRATE

Error name
CL_CANT_MIGRATE

1171
3 ERROR CODES

Cause
Have selected a non-hardware block for migration.

Solution
Be sure you select a hardware function block for migration.

3.48.7 10907
Failed to Initialize RSLinx driver.

Error ID
ERR_CL_CANT_INIT_RSLINX

Error name
CL_CANT_INIT_RSLINX

Cause
RSLinx might not be installed or running.

Solution
Be sure RSLinx is installed correctly and is running.

3.48.8 10908
Failed to Open RSLinx driver.

Error ID
ERR_CL_CANT_OPEN_RSLINX

Error name
CL_CANT_OPEN_RSLINX

Cause
Should not occur.

Solution
Call Technical Assistance.

3.48.9 10909
Unable to parse COMMPATH or ASAPATH.

Error ID
ERR_CL_UNABLE_TO_PARSE

Error name
CL_UNABLE_TO_PARSE

1172 www.honeywell.com
 3 ERROR CODES

Cause
Should not occur.

Solution
Call Technical Assistance.

3.48.10 10910
Unable to send unconnected message.

Error ID
ERR_CL_UNABLE_UCONMSG

Error name
CL_UNABLE_UCONMSG

Cause
None.

Solution
None.

3.48.11 10911
Unable to fetch RSLinx driver name.

Error ID
ERR_CL_UNABLE_TO_FETCH_DRVNM

Error name
CL_UNABLE_TO_FETCH_DRVNM

Cause
COMMPATH is not in the correct format.

Solution
None.

3.48.12 10912
Unable to execute pcmloader.exe.

Error ID
ERR_CL_CANT_EXECUTE_PCMLOADER

Error name
CL_CANT_EXECUTE_PCMLOADER

1173
3 ERROR CODES

Cause
Cannot find pcmloader.exe or the arguments passed to the program are incorrect.

Solution
None.

3.48.13 10913
Corrupt NVS file.

Error ID
ERR_CL_CORRUPT_NVSFILE

Error name
CL_CORRUPT_NVSFILE

Cause
NVS file has syntax error.

Solution
None.

3.48.14 10914
Unable to send connected message.

Error ID
ERR_CL_UNABLE_CONMSG

Error name
CL_UNABLE_CONMSG

Cause
None.

Solution
None.

3.48.15 10915
Error from SNMP API.

Error ID
ERR_CL_ERR_SNMP_API

Error name
CL_ERR_SNMP_API

1174 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.48.16 10916
Error initializing SNMP driver.

Error ID
ERR_CL_ERR_SNMP_DRVR

Error name
CL_ERR_SNMP_DRVR

Cause
None.

Solution
None.

3.48.17 10917
Error loading AB_SNMP.DLL.

Error ID
ERR_CL_ERR_SNMP_DLL

Error name
CL_ERR_SNMP_DLL

Cause
Cannot find AB_SNMP.DLL.

Solution
None.

3.48.18 10918
Error getting IP Address from module.

Error ID
ERR_CL_UNABLE_GET_IP

Error name
CL_UNABLE_GET_IP

1175
3 ERROR CODES

Cause
None.

Solution
None.

3.48.19 10919
No updates accepted in set Definition.

Error ID
ERR_CL_NO_UPDATES_ACCEPTED

Error name
CL_NO_UPDATES_ACCEPTED

Cause
None.

Solution
None.

3.48.20 10920
Timeout after module reset.

Error ID
ERR_CL_TMOUT_AFTER_RESET

Error name
CL_TMOUT_AFTER_RESET

Cause
None.

Solution
None.

3.48.21 10921
Cannot open bin file.

Error ID
ERR_CL_CANT_OPEN_BIN_FILE

Error name
CL_CANT_OPEN_BIN_FILE

1176 www.honeywell.com
 3 ERROR CODES

Cause
Cannot find bin file.

Solution
None.

3.48.22 10922
Bogus chunk size.

Error ID
ERR_CL_BOGUS_CHUNK_SZ

Error name
CL_BOGUS_CHUNK_SZ

Cause
None.

Solution
None.

3.48.23 10923
Bogus upload size.

Error ID
ERR_CL_BOGUS_UPLOAD_SZ

Error name
CL_BOGUS_UPLOAD_SZ

Cause
None.

Solution
None.

3.48.24 10924
Mismatch chunk.

Error ID
ERR_CL_MISMATCH_CHUNK

Error name
CL_MISMATCH_CHUNK

1177
3 ERROR CODES

Cause
None.

Solution
None.

3.48.25 10925
Bad module status.

Error ID
ERR_CL_BAD_MODULE_STATUS

Error name
CL_BAD_MODULE_STATUS

Cause
None.

Solution
None.

3.48.26 10926
Unknown step or chunk.

Error ID
ERR_CL_UNKNOWN_STEP_CHUNK

Error name
CL_UNKNOWN_STEP_CHUNK

Cause
None.

Solution
None.

3.48.27 10927
Unable to talk to the module.

Error ID
ERR_CL_UNABLE_TO_TALK_MODULE

Error name
CL_UNABLE_TO_TALK_MODULE

1178 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.48.28 10928
Timeout while waiting for secondary CPM to become visible.

Error ID
ERR_CL_CPM_PARTNER_NOT_VISIBLE

Error name
CL_CPM_PARTNER_NOT_VISIBLE

Cause
None.

Solution
None.

3.48.29 10929
Timeout while waiting for Indirect Sync.

Error ID
ERR_CL_TIMEOUT_WAITING_FOR_INDSYNC

Error name
CL_TIMEOUT_WAITING_FOR_INDSYNC

Cause
None.

Solution
None.

3.48.30 10930
The Secondary RM did not reset correctly.

Error ID
ERR_CL_SEC_RM_RESET_TIMEOUT

Error name
CL_SEC_RM_RESET_TIMEOUT

1179
3 ERROR CODES

Cause
None.

Solution
None.

3.48.31 10931
Unable to query associated IOMs.

Error ID
ERR_CL_UNABLE_TO_QUERY_IOM

Error name
CL_UNABLE_TO_QUERY_IOM

Cause
None.

Solution
None.

3.48.32 10932
Unable to fetch communication path.

Error ID
ERR_CL_UNABLE_TO_FETCH_COMMPATH

Error name
CL_UNABLE_TO_FETCH_COMMPATH

Cause
None.

Solution
None.

3.48.33 10933
Unable to query parameter for block.

Error ID
ERR_CL_UNABLE_TO_QUERY_PARAM

Error name
CL_UNABLE_TO_QUERY_PARAM

1180 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.48.34 10934
Unable Query either ver_rev or the database.

Error ID
ERR_CL_UNABLE_TO_QUERY_VERREV_DB

Error name
CL_UNABLE_TO_QUERY_VERREV_DB

Cause
None.

Solution
None.

3.48.35 10935
Unable Query database.

Error ID
ERR_CL_UNABLE_TO_QUERY_DB

Error name
CL_UNABLE_TO_QUERY_DB

Cause
None.

Solution
None.

3.48.36 10936
Unable to parse communication path.

Error ID
ERR_CL_UNABLE_TO_PARSE_COMMPATH

Error name
CL_UNABLE_TO_PARSE_COMMPATH

1181
3 ERROR CODES

Cause
None.

Solution
None.

3.48.37 10937
Unable to query module with communication path.

Error ID
ERR_CL_UNABLE_TO_QUERY_MODULE

Error name
CL_UNABLE_TO_QUERY_MODULE

Cause
None.

Solution
None.

3.48.38 10938
Two CPM's in a single chassis not allowed.

Error ID
ERR_CL_ILLEGAL_CONFIG

Error name
CL_ILLEGAL_CONFIG

Cause
None.

Solution
None.

3.48.39 10939
Cannot migrate to an earlier Service Pack.

Error ID
ERR_CL_SPLATERTHANCURRENT

Error name
CL_SPLATERTHANCURRENT

1182 www.honeywell.com
 3 ERROR CODES

Cause
The service pack to be migrated to is less than the current service pack. Cannot migrate backwards.

Solution
None.

3.48.40 10940
Cannot migrate to Service Pack because the component is not at a compatible release.

Error ID
ERR_CL_SPINCOMPCURRENT

Error name
CL_SPINCOMPCURRENT

Cause
The selected service pack is not compatible to the release currently in the component.

Solution
Upgrade the component to a compatible release.

3.48.41 10941
Cannot migrate to an earlier Point Release.

Error ID
ERR_CL_PNTLATERTHANCURRENT

Error name
CL_PNTLATERTHANCURRENT

Cause
The point release to be migrated to is less than the current point release. Cannot migrate backwards.

Solution
None.

3.48.42 10942
Cannot migrate to Point Release because the component is not at a compatible release.

Error ID
ERR_CL_PNTINCOMPCURRENT

Error name
CL_PNTINCOMPCURRENT

1183
3 ERROR CODES

Cause
The selected Point release is not compatible to the release currently in the component.

Solution
Upgrade the component to a compatible release.

3.48.43 10943
Misconfigured module detected. Check the addressing configuration for errors.

Error ID
ERR_CL_UNKNOWNMODULE

Error name
CL_UNKNOWNMODULE

Cause
Unknown or misconfigured module was in chassis and loaded block could not be found in ERDB.

Solution
Check module slot, MAC address, and supervisory slot configurations.

3.48.44 10944
Module Redundancy Partner Compatibility Check Failed.

Error ID
ERR_CL_MODREDUNCOMPATFAILED

Error name
CL_MODREDUNCOMPATFAILED

Cause
MODCOMPATA check in RM failed after 10 retries.

Solution
None.

3.48.45 10945
User cancelled the operation.

Error ID
ERR_CL_USERCANCELLED

Error name
CL_USERCANCELLED

1184 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.48.46 10946
This Fieldbus Device will be restarted in order to change its BOOT_OPER class

Error ID
ERR_CL_RESTART_FF_DEVICE

Error name
ERR_CL_RESTART_FF_DEVICE

Cause
None.

Solution
None.

3.48.47 10947
This Fieldbus Device will be restarted in order to change its BOOT_OPER class

Error ID
ERR_CL_RESTART_FF_DEVICE

Error name
ERR_CL_RESTART_FF_DEVICE

Cause
None.

Solution
None.

3.48.48 10948
This Fieldbus Device will be restarted in order to change its BOOT_OPER class

Error ID
ERR_CL_RESTART_FF_DEVICE

Error name
ERR_CL_RESTART_FF_DEVICE

1185
3 ERROR CODES

Cause
None.

Solution
None.

3.48.49 10949
Illegal Configuration. More than two LIOMs in a single chassis is not allowed.

Error ID
ERR_CL_ILLEGAL_LIOM_CONFIG

Error name
CL_ILLEGAL_LIOM_CONFIG

Cause
None.

Solution
None.

3.48.50 10951
The CAB blocktype is not complete in its definition.

Error ID
ERR_CL_INCOMPLETE_LOCK

Error name
CL_INCOMPLETE_LOCK

Cause
The blocktype is not complete in its definition.

Solution
None.

3.48.51 10952
CDP is having NULL value

Error ID
ERR_CL_PARAM_NULL

Error name
CL_PARAM_NULL

1186 www.honeywell.com
 3 ERROR CODES

Cause
No default value or value not set in strategy

Solution
None.

3.48.52 10953
Preload failed for CAB block

Error ID
ERR_CL_PRELOAD_FAILED

Error name
CL_PRELOAD_FAILED

Cause
Either incomplete lock set or there are null values for CDPs

Solution
None.

3.48.53 10954
Load of CAB algorithm failed

Error ID
ERR_CL_CABLOAD_ALGORITHM_FAILED

Error name
CL_CABLOAD_ALGORITHM_FAILED

Cause
Either timer would have expired or some internal problem

Solution
None.

3.48.54 10955
Error accessing CDADLL

Error ID
ERR_CL_CDADLL_ACCESS_FAILED

Error name
CL_CDADLL_ACCESS_FAILED

1187
3 ERROR CODES

Cause
None.

Solution
None.

3.48.55 10956
BlockType's algorithm is currently being loaded in ACE. Try loading again.

Error ID
ERR_CL_BTALGO_LOAD_IN_PROGRESS

Error name
BTALGO_LOAD_IN_PROGRESS

Cause
The load of blocktype's algorithm is in progress in ACE, which is initiated by some other client.

Solution
Try loading the block again after sometime.

3.48.56 10957
Store of parameter value to ACE is failed.

Error ID
ERR_CL_PARAM_STORE_FAILED

Error name
PARAM_STORE_FAILED

Cause
A CDA call to store parameter value would have failed

Solution
None.

3.48.57 10958
Block Type algorithm load status is invalid in ACE.

Error ID
ERR_CL_ALGOLOAD_STATUS_INVALID

Error name
ALGOLOAD_STATUS_INVALID

1188 www.honeywell.com
 3 ERROR CODES

Cause
The load status is invalid

Solution
None.

3.48.58 10959
The CAB blocktype has null value CDPs

Error ID
ERR_CL_NULL_CDPS

Error name
CL_NULL_CDPS

Cause
The blocktype has null value CDPs.

Solution
None.

3.48.59 10960
Convert is not allowed because of internal parameter identifier collisions with the target block type. Perform a
Save As Renew first on the target block type and then convert.

Error ID
ERR_CL_CONVERT_PC_COLLISION

Error name
CONVERT_PC_COLLISION

Cause
Parameter codes collide between source and target block types

Solution
Do a Save As Renew on the target block type first

3.48.60 10961
The CAB block is not compatible with the supported .Net version of ACE.

Error ID
ERR_CL_CAB_DOTNET_INCOMPATIBILITY

Error name
CL_CAB_DOTNET_INCOMPATIBILITY

1189
3 ERROR CODES

Cause
A CAB block is tried to be loaded whose .Net version is not 1.1

Solution
The CAB block is to be built with a 1.1 .Net version to be able to be loaded

3.48.61 10962
Restore of algorithm failed for the CAB block

Error ID
ERR_CL_CAB_RESTORE_FAILED

Error name
CL_CAB_RESTORE_FAILED

Cause
Load of a CAB algorithm failed during Checkpoint Restore operation. The data might be corrupted in the
checkpoint file.

Solution
Try reloading the CM containing the CAB block again after the restore operation is completed.

3.48.62 10963
CAB block is not compatible with the supported version of AC

Error ID
ERR_CL_CAB_SOFTVER_INCOMPATIBILITY

Error name
CL_CAB_SOFTVER_INCOMPATIBILITY

Cause
A CAB block was tried to be loaded whose ACE version is not compatible

Solution
The CAB block is to be built with a compatible version of ACE.

3.48.63 10966
The parameter is converted to a value.

Error ID
ERR_CL_CONVERT_PARAM_WARNING

Error name
CL_CONVERT_PARAM_WARNING

1190 www.honeywell.com
 3 ERROR CODES

Cause
The data type of the parameter is different in the current parent and the selected new parent.

Solution
None

3.48.64 10968
The required Node Name parameter has not been specified

Error ID
ERR_CL_EMB_NODENAMEMISSING

Error name
CL_EMB_NODENAMEMISSING

Cause
(EMB) as stated

Solution
Enter a unique value for the NODENAME parameter.

3.48.65 10969
The required Node Name parameter conflicts with that of an existing server. Node Name should be unique for
each server.

Error ID
ERR_CL_EMB_NODENAMEDUPLICATE

Error name
CL_EMB_NODENAMEDUPLICATE

Cause
(EMB) as stated

Solution
Enter a unique value for the NODENAME parameter.

3.48.66 10970
The IO module %s is wrongly configured. Verify IOMSLOT, ULCNBMAC and DLCNBSLOT parameters of
the IO module.

Error ID
ERR_CL_IOM_MISCONFIG

1191
3 ERROR CODES

Error name
CL_IOM_MISCONFIG

Cause
(Migration Wizard) The user has configured the IO module wrongly, With the wrong address we are able to get
the response from a different module in some other chassis.

Solution
Delete the IO module from monitoring side, Configure the IO module with correct configuration parameters and
reload it.

3.48.67 10971
Failed to stop services on current secondary

Error ID
ERR_CL_SVCSTOPFAILED

Error name
CL_SVCSTOPFAILED

Cause
Control Builder user does not have necessary security privileges.

Solution
Login as manager

3.48.68 10972
Failed to start services on current secondary.

Error ID
ERR_CL_SVCSTARTFAILED

Error name
CL_SVCSTARTFAILED

Cause
Control Builder user does not have necessary security privileges.

Solution
Login as manager

3.48.69 10973
Failed to fetch static IP of Primary EHG

1192 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_FETCHPRISTCIPFAILED

Error name
CL_FETCHPRISTCIPFAILED

Cause
TCP IP settings not properly configured for 'Yellow' NIC on Primary.

Solution
Configure a valid static IP for the node.

3.48.70 10974
Failed to fetch static IP of Secondary EHG

Error ID
ERR_CL_FETCHSECSTCIPFAILED

Error name
CL_FETCHSECSTCIPFAILED

Cause
TCP IP settings not properly configured for 'Yellow' NIC on Secondary.

Solution
Configure a valid static IP for node.

3.48.71 10975
New Release Software not found at source location

Error ID
ERR_CL_FILENOTFOUND

Error name
CL_FILENOTFOUND

Cause
Possible Installation problem. New EHG software components are not available in source path.

Solution
Copy new software to source location on server.

3.48.72 10976
Failed to transfer new software components to target

1193
3 ERROR CODES

Error ID
ERR_CL_FILETRFAILED

Error name
CL_FILETRFAILED

Cause
Network Problems or Machine State is invalid or Target is not an EHG.

Solution
Correct any network problems, reboot node and re-attempt migration.

3.48.73 10977
Unknown Failure at Current Primary

Error ID
ERR_CL_PRINODEUNREACHABLE

Error name
CL_PRINODEUNREACHABLE

Cause
A hardware or OS level failure has happened on Primary EHG Node

Solution
Reboot the machine.

3.48.74 10978
Unknown Failure at Current Secondary

Error ID
ERR_CL_SECNODEUNREACHABLE

Error name
CL_SECNODEUNREACHABLE

Cause
A hardware or OS level failure has happened on Secondary EHG Node

Solution
Reboot the machine.

3.48.75 10979
Synchronization of EHG pair failed

1194 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_SYNCFAILED

Error name
CL_SYNCFAILED

Cause
Synchronization failed.

Solution
Correct the reason for Swap Fail and continue migration manually.

3.48.76 10980
Failed to Swap Redundancy State

Error ID
ERR_CL_SWAPFAILED

Error name
CL_SWAPFAILED

Cause
Swap Redundancy Role Failed.

Solution
Correct the reason for Swap Fail and continue migration manually.

3.48.77 10981
Current Redundancy State Prevents On Process Migration

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.78 10982
Current Redundancy State Prevents On Process Migration

1195
3 ERROR CODES

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.79 10983
Current Redundancy State Prevents On Process Migration

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.80 10984
Current Redundancy State Prevents On Process Migration

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.81 10985
Current Redundancy State Prevents On Process Migration

1196 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.82 10986
Current Redundancy State Prevents On Process Migration

Error ID
ERR_CL_INVALIDRDNSTATE

Error name
CL_INVALIDRDNSTATE

Cause
The Redundancy state does not allow OPM to start

Solution
Correct existing problem.

3.48.83 10987
Either RM FB not loaded to monitor tree or reconfigure RM FB to use the same communication path as the FIM
FB

Error ID
ERR_CL_OPM_RMDIFFCOMMPATH

Error name
CL_OPM_RMDIFFCOMMPATH

Cause
There could a possibility of having more downlink CNI cards in the main chassis. If there are remote chassis
connected to this chassis, We expect all the modules in remote chassis will be communicating to the primary
chassis via a single downlink CNI card. There could be a possibility for the user to configure the remote chassis
modules via different CNI modules. This is illegal configuration.

Solution
The user is to delete the RM module from Monitor as well as Project side and reconfigure the RM with proper
CNI which is the only CNI talking to the remote chassis. Reload them

1197
3 ERROR CODES

3.48.84 10988
Either FIM FB not loaded to monitor tree or call TAC for alternate manual on/off process migration procedure

Error ID
ERR_CL_OPM_FIMDIFFCOMMPATH

Error name
CL_OPM_FIMDIFFCOMMPATH

Cause
There could a possibility of having more downlink CNI cards in the main chassis. If there are remote chassis
connected to this chassis, we expect all the modules in remote chassis to be communicating to the primary
chassis via a single downlink CNI card. There could be a possibility for the user to configure the remote chassis
modules via different CNI modules. This is an illegal configuration. This error comes only when the FIM only
chassis module is having more CNI cards and each FIM is configured through different downlink CNI card or
different uplink CNI card.

Solution
There is a possibility of Manual OPM for this situation. The Manual On Process Migration instructions are
given only to TAC. Customer has to contact TAC to do Manual On Process Migration of FIM only chassis

3.48.85 10989
The limit for the maximum number of Assets that have been designated as Assignable been reached.

Error ID
ERR_CL_ASSETASSGNLIMIT

Error name
CL_ASSETASSGNLIMIT

Cause
(EMB) as stated

Solution
Change Assets to set the ASSIGNABLE parameter to FALSE.

3.48.86 10990
There is an error in validating the Server names

Error ID
ERR_CL_EMB_SERVERVALIDATION

Error name
CL_EMB_SERVERVALIDATION

1198 www.honeywell.com
 3 ERROR CODES

Cause
(EMB) as stated

Solution
See the generated log file and rectify the errors.

3.48.87 10991
There is an error in validating the Point names

Error ID
ERR_CL_EMB_POINTVALIDATION

Error name
CL_EMB_POINTVALIDATION

Cause
(EMB) as stated

Solution
See the generated log file and rectify the errors

3.48.88 10992
There is an error in validating the FQN names

Error ID
ERR_CL_EMB_FQNVALIDATION

Error name
CL_EMB_FQNVALIDATION

Cause
(EMB) as stated

Solution
See the generated log file and rectify the errors.

3.48.89 10993
There is an error in loading the System Configuration.

Error ID
ERR_CL_EMB_SYSTEMLOAD

Error name
CL_EMB_SYSTEMLOAD

1199
3 ERROR CODES

Cause
(EMB) as stated

Solution
See the generated log file and rectify the errors.

3.48.90 10994
There is an error in loading the Asset-Alarm Group

Error ID
ERR_CL_EMB_MODELLOAD

Error name
CL_EMB_MODELLOAD

Cause
(EMB) as stated

Solution
See the generated log file and rectify the errors.

3.48.91 10995
There is an error in connecting to the server

Error ID
ERR_CL_EMB_SERVERCONNECTION

Error name
CL_EMB_SERVERCONNECTION

Cause
(EMB) as stated

Solution
Check that the server exists and is running in the system.

3.48.92 10996
There is an error in loading and initializing the HSCCLI32.DLL

Error ID
ERR_CL_EMB_INITHSCCLI

Error name
CL_EMB_INITHSCCLI

1200 www.honeywell.com
 3 ERROR CODES

Cause
(EMB) as stated

Solution
Make sure that the dll is present in the system.

3.48.93 10997
Failed to Export Asset Model from Server

Error ID
ERR_MGRT_EMB_FAILEDASSETEXPORT

Error name
MGRT_EMB_FAILEDCONNECTINGSERVER

Cause
Asset Model is not present on the server.

Solution
Make sure that Asset Model is present.

3.48.94 10998
Failed to Export Alarm Groups from Server

Error ID
ERR_MGRT_EMB_FAILEDALARMEXPORT

Error name
MGRT_EMB_FAILEDCONNECTINGSERVER

Cause
Alarm Groups is not present on the server.

Solution
Make sure that Alarm Groups is present.

3.48.95 10999
The item name entered is not allowed because it is a duplicate of a name under this parent.

Error ID
ERR_CL_DUPLITEMNAME

Error name
CL_DUPLITEMNAME

1201
3 ERROR CODES

Cause
User entered an item name that already exists under this parent.

Solution
Change name and try again or move to a different parent and try again.

1202 www.honeywell.com
 3 ERROR CODES

3.49 Codes 11011 to 11099

Related topics
“11011” on page 1204
“11012” on page 1204
“11013” on page 1205
“11014” on page 1205
“11015” on page 1205
“11016” on page 1206
“11021” on page 1206
“11022” on page 1206
“11023” on page 1207
“11024” on page 1207
“11025” on page 1207
“11026” on page 1208
“11031” on page 1208
“11033” on page 1209
“11034” on page 1209
“11035” on page 1209
“11036” on page 1210
“11041” on page 1210
“11042” on page 1210
“11043” on page 1211
“11045” on page 1211
“11051” on page 1211
“11052” on page 1212
“11053” on page 1212
“11054” on page 1212
“11056” on page 1213
“11057” on page 1213
“11058” on page 1213
“11059” on page 1214
“11061” on page 1214
“11062” on page 1214
“11063” on page 1215
“11064” on page 1215
“11065” on page 1215
“11066” on page 1216
“11067” on page 1216
“11068” on page 1216
“11081” on page 1217
“11082” on page 1217
“11083” on page 1217
“11084” on page 1218
“11085” on page 1218
“11086” on page 1218
“11087” on page 1219

1203
3 ERROR CODES

“11088” on page 1219

“11089” on page 1219
“11090” on page 1220
“11091” on page 1220
“11092” on page 1220
“11093” on page 1221
“11094” on page 1221
“11095” on page 1221
“11096” on page 1222
“11097” on page 1222
“11098” on page 1223
“11099” on page 1223

3.49.1 11011
When the client attempted to write to the server, the socket was not writable.

Error ID
HSC_C_WSELECT_FAIL

Error name
Client - Write Select Fail.

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.2 11012
When the client attempted to write to the server, the write to the socket failed.

Error ID
HSC_C_WRITE_TIMEOUT

Error name
Client - Write Timeout

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

1204 www.honeywell.com
 3 ERROR CODES

3.49.3 11013
When the client attempted to write to the server, the write was timed out.

Error ID
HSC_C_WRITE_FAIL

Error name
Client - Write Fail

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.4 11014
When the client attempted to read from the server, the socket was not readable.

Error ID
HSC_C_RSELECT_FAIL

Error name
Client - Read Select Fail

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.5 11015
When the client attempted to read from the server, the read was timed out.

Error ID
HSC_C_READ_TIMEOUT

Error name
Client - Read Timeout

1205
3 ERROR CODES

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.6 11016
When the client attempted to read from the server, the read from the socket failed.

Error ID
HSC_C_READ_FAIL

Error name
Client - Read Fail

Cause
If any of these errors occur, the API function will return these error values. There can be no guarantee that the
API function will have completed.

Solution
It is recommended after any of these errors to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.7 11021
When the server attempted to read from the client, the socket was not readable.

Error ID
HSC_S_RSELECT_FAIL

Error name
Server - Read Select

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.8 11022
When the server attempted to read from the client, the read was timed out.

Error ID
HSC_S_READ_TIMEOUT

1206 www.honeywell.com
 3 ERROR CODES

Error name
Server - Read Timeout

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.9 11023
When the server attempted to read from the client, a read from the socket failed.

Error ID
HSC_S_READ_FAIL

Error name
Server - Read Fail

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.10 11024
When the server attempted to write to the client, the socket was not writable.

Error ID
HSC_S_WSELECT_FAIL

Error name
Server - Write Select Fail

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.11 11025
When the server attempted to write to the client, the write was timed out.

1207
3 ERROR CODES

Error ID
HSC_S_WRITE_TIMEOUT

Error name
Server - Write Timeout

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.12 11026
When the server attempted to write to the client, the write to the socket failed.

Error ID
HSC_S_WRITE_FAIL

Error name
Server - Write Fail

Cause
None.

Solution
If any of these errors occur, the server process will exit - effectively severing the connection. The client will be
left to timeout.

3.49.13 11031
When confd started, a socket was not created.

Error ID
HSC_S_SOCKET_FAIL

Error name
Server - Socket Fail

Cause
None.

Solution
The confd daemon will fail to start.

1208 www.honeywell.com
 3 ERROR CODES

3.49.14 11033
When confd started, there as a failure to bind a socket.

Error ID
HSC_S_BIND_FAIL

Error name
Server - Socket Bind Fail

Cause
None.

Solution
The confd daemon will fail to start.

3.49.15 11034
When confd started, there was a failure to listen to a socket.

Error ID
HSC_S_LISTEN_FAIL

Error name
Server - Socket Listen Fail

Cause
None.

Solution
The confd daemon will fail to start.

3.49.16 11035
When confd started, there was a failure to set socket options.

Error ID
HSC_S_IOCTL_FAIL

Error name
Server - Socket IOCtl Fail

Cause
None.

Solution
The confd daemon will fail to start.

1209
3 ERROR CODES

3.49.17 11036
When confd started, there was a failure to set socket options.

Error ID
HSC_S_SETSOCKOPT_FAIL

Error name
Server - Set Socket Options Fail

Cause
None.

Solution
The confd daemon will fail to start.

3.49.18 11041
When confd attempted to spawn a child process, it failed to accept from a readable socket.

Error ID
HSC_S_ASELECT_FAIL

Error name
Server - Socket Asynchronous Select Fail

Cause
None.

Solution
The process connecting clients will exit, disabling any further connections.

3.49.19 11042
When confd attempted to spawn a child process, it failed to accept.

Error ID
HSC_S_ACCEPT_FAIL

Error name
Server - Socket Accept Fail

Cause
None.

Solution
The process connecting clients will exit, disabling any further connections.

1210 www.honeywell.com
 3 ERROR CODES

3.49.20 11043
When confd attempted to spawn a child process, it failed to fork.

Error ID
HSC_S_SPAWN_FAIL

Error name
Server - Thread Spawn Fail

Cause
None.

Solution
The process connecting clients will exit, disabling any further connections.

3.49.21 11045
When confd attempted to close a socket, it failed and caused a note in the log file.

Error ID
HSC_S_CLOSE_FAIL

Error name
Server - Socket Close Fail

Cause
None.

Solution
The process will not be terminated by the error.

3.49.22 11051
When the client attempted to connect, in order to disconnect to the server, there was an invalid host name.

Error ID
HSC_C_INVALID_HOSTNAME

Error name
Client - Invalid Hostname

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

1211
3 ERROR CODES

3.49.23 11052
When the client attempted to connect, in order to disconnect to the server, a socket failed to be created.

Error ID
HSC_C_SOCKET_FAIL

Error name
Client - Socket Fail

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.24 11053
When the client attempted to connect, in order to disconnect to the server, socket options failed to be set.

Error ID
HSC_C_IOCTLSOCKET_FAIL

Error name
Client - Socket IOCtl Fail

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.25 11054
When the client attempted to connect, in order to disconnect to the server, socket options failed to be set.

Error ID
HSC_C_SETSOCKOPT_FAIL

Error name
Client - Set Socket Options Fail

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

1212 www.honeywell.com
 3 ERROR CODES

3.49.26 11056
When the client attempted to connect, in order to disconnect to the server, the IP address failed to be found.

Error ID
HSC_C_GETHOST_FAIL

Error name
Client - Get Host Fail

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.27 11057
When the client attempted to connect, in order to disconnect to the server, the connection request failed.

Error ID
HSC_C_CONNECT_FAIL

Error name
Client - Server Connection Fai

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.28 11058
When the client attempted to connect, in order to disconnect to the server, the connect socket failed to be
writable.

Error ID
HSC_C_CSELECT_FAIL

Error name
Client - CSelect Fail

Cause
None.

1213
3 ERROR CODES

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.29 11059
When the client attempted to connect, in order to disconnect to the server, the connection to the server timed
out.

Error ID
HSC_C_CONNECT_TIMEOUT

Error name
Client - Server Connection Timeout

Cause
None.

Solution
A connection has failed. It is recommended that hsc_c_disconnect be called.

3.49.30 11061
Lock fail indicates a request for memory has failed.

Error ID
HSC_C_LOCK_FAIL

Error name
Client - Lock Fail

Cause
None.

Solution
The API function has failed. It is recommended to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.31 11062
Malloc indicates a request for memory has failed.

Error ID
HSC_C_MALLOC_FAIL

Error name
Client - Memory Allocation Fail

1214 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
The API function has failed. It is recommended to call hsc_c_disconnect and then attempt to establish another
connection.

3.49.32 11063
An API function is being called for a connection number which has not been connected.

Error ID
HSC_C_CLOSED_CONNECTION

Error name
Client - Connection Closed

Cause
None.

Solution
Hsc_c_connect should be called first in order to obtain a connection.

3.49.33 11064
Indicates that an API function is being called for a connection which has had some communication failure.

Error ID
HSC_C_FAILED_CONNECTION

Error name
Client - Connection Failed

Cause
None.

Solution
The connection should be closed using hsc_c_disconnect and then hsc_c_connect should be called to obtain a
new connection.

3.49.34 11065
The server has run out of memory or resources.

Error ID
HSC_C_FORK_FAIL

1215
3 ERROR CODES

Error name
Client - Fork Fail

Cause
None.

Solution
A new connection will need to be established.

3.49.35 11066
The server has run out of memory or resources.

Error ID
HSC_C_MALLOC_FAIL

Error name
Client - Memory Allocation Fail

Cause
None.

Solution
A new connection will need to be established.

3.49.36 11067
An API function is being carried out on the secondary in a redundant system.

Error ID
HSC_S_SECONDARY

Error name
Server - Is Secondary

Cause
None.

Solution
A disconnect should be performed and the primary system should be connected.

3.49.37 11068
This error occurred on the server when the xpath() routine failed to convert a file name to its full pathname
equivalent.

Error ID
HSC_S_XPATH_FAIL

1216 www.honeywell.com
 3 ERROR CODES

Error name
Server - XPath Fail

Cause
None.

Solution
Ensure the file exists and that the server has permission to access the path provided for the filename.

3.49.38 11081
The results of the API function are invalid, but the connection is good.

Error ID
HSC_C_INVALID_PNTBLD_INFILE

Error name
Client - Invalid Point Build Input File

Cause
Input file was not specified.

Solution
Specify an input file.

3.49.39 11082
The results of the API function are invalid, but the connection is good.

Error ID
HSC_C_INVALID_PNTBLD_OUTFILE

Error name
Client - Invalid Point Build Output File

Cause
Output file was not specified.

Solution
Specify an output file.

3.49.40 11083
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_INVALID_PNTBLD_INFILE

1217
3 ERROR CODES

Error name
Server - Invalid Point Build Input File

Cause
Input file does not exist, input file is read-only, or Server has no access permissions for the file.

Solution
Check that input file path is correct, it is not read-only and there is access permission for the manager account to
the file.

3.49.41 11084
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_INVALID_PNTBLD_OUTFILE

Error name
Server - Invalid Point Build Output File

Cause
Output file is read-only or Server has no access permissions for the file.

Solution
Check that output file is not read-only and there is access permission for the manager account to the file.

3.49.42 11085
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_PNTBLD_FAIL

Error name
Server - Point Build Fail

Cause
The pntbld command line was too long, the pntbld command failed to run correctly, or the pntbld command
returned an unknown status.

Solution
Shorten the names of input and output files, try running the pntbld directly on the server or restart the computer.

3.49.43 11086
The results of the API function are invalid, but the connection is good.

1218 www.honeywell.com
 3 ERROR CODES

Error ID
HSC_S_PNTBLD_ERROR

Error name
Server - Point Build Error

Cause
There were errors during pntbld.

Solution
Check the pntbld output file and correct errors.

3.49.44 11087
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_PNTBLD_WARNING

Error name
Server - Point Build Warning

Cause
There were warnings during pntbld.

Solution
Check the pntbld output file, and correct or ignore the warnings.

3.49.45 11088
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_PNTBLD_NOT_LICENSED

Error name
Server - Point Build Not Licensed

Cause
Using Control Builder, QuickBuilder, or pntbld utility and pntbld is not licensed.

Solution
Obtain the appropriate license.

3.49.46 11089
The results of the API function are invalid, but the connection is good.

1219
3 ERROR CODES

Error ID
HSC_S_PNTBLD_BACKUP_AND_SYNCD

Error name
Server - Server status is backup and synchronized

Cause
The pntbld command was attempted on the backup server of a redundant pair of servers.

Solution
Ensure the pntbld command runs on the primary server, if the server base name was used in the connection this
would happen automatically.

3.49.47 11090
Occurs if there is a database modification currently in progress (for example, a pntbld, hdwbld, sysbld).

Error ID
HSC_S_DATABASE_MOD

Error name
Server - A database modification is in progress. Try again later.

Cause
Another pntbld or hdwbld or other critical database task is in operation.

Solution
The hsc_c_confpnt should be retried shortly after receiving this error.

3.49.48 11091
The results of the API function are invalid, but the connection is good.

Error ID
HSC_C_INVALID_HDWBLD_INFILE

Error name
Client - Invalid Hardware Build Input File

Cause
Input file was not specified.

Solution
Specify an input file.

3.49.49 11092
The results of the API function are invalid, but the connection is good.

1220 www.honeywell.com
 3 ERROR CODES

Error ID
HSC_C_INVALID_HDWBLD_OUTFILE

Error name
Client - Invalid Hardware Build Output File

Cause
Output file was not specified.

Solution
Specify an output file.

3.49.50 11093
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_INVALID_HDWBLD_INFILE

Error name
Server - Invalid Hardware Build Input File

Cause
Input file does not exist, input file is read-only, or Server has no access permissions for the file.

Solution
Check that input file path is correct, it is not read-only and there is access permission for the manager account to
the file.

3.49.51 11094
The results of the API function are invalid, but the connection is good.

Error ID
HSC_S_INVALID_HDWBLD_OUTFILE

Error name
Server - Invalid Hardware Build Output File

Cause
Output file is read-only or Server has no access permissions for the file.

Solution
Check that output file is not read-only and there is access permission for the manager account to the file.

3.49.52 11095
The results of the API function are invalid, but the connection is good.

1221
3 ERROR CODES

Error ID
HSC_S_HDWBLD_FAIL

Error name
Server - Hardware Build Fail

Cause
The hdwbld command line was too long, the hdwbld command failed to run correctly, or the hdwbld command
returned an unknown status.

Solution
Shorten the names of input and output files, try running the hdwbld directly on the server, or restart the
computer.

3.49.53 11096
The hdwbld has succeeded, but errors occurred during the hdwbld.

Error ID
HSC_S_HDWBLD_ERROR

Error name
Server - Hardware Build Error

Cause
There were errors during hdwbld.

Solution
Check the hdwbld output file and correct errors.

3.49.54 11097
The hdwbld has succeeded, but errors occurred during the hdwbld.

Error ID
HSC_S_HDWBLD_WARNING

Error name
Server - Hardware Build Warning

Cause
There are warnings during hdwbld.

Solution
Check the hdwbld output file and correct or ignore the warnings.

1222 www.honeywell.com
 3 ERROR CODES

3.49.55 11098
The hdwbld has succeeded, but errors occurred during the hdwbld.

Error ID
HSC_S_HDWBLD_NOT_LICENSED

Error name
Server - Hardware Build Not Licensed

Cause
Using QuickBuilder or hdwbld command and hdwbld is not licensed.

Solution
Obtain the appropriate license.

3.49.56 11099
The hdwbld has succeeded, but errors occurred during the hdwbld.

Error ID
HSC_S_HDWBLD_BACKUP_AND_SYNCD

Error name
Server - Server status is backup and synchronized

Cause
The hdwbld command was attempted on the backup server of a redundant pair of servers.

Solution
Ensure the hdwbld command runs on the primary server. If the server base name was used in the connection,
this would happen automatically.

1223
3 ERROR CODES

3.50 Codes 11101 to 11195

Related topics
“11101” on page 1225
“11102” on page 1225
“11103” on page 1225
“11104” on page 1226
“11105” on page 1226
“11106” on page 1226
“11107” on page 1227
“11108” on page 1227
“11121” on page 1227
“11122” on page 1228
“11123” on page 1228
“11131” on page 1228
“11132” on page 1229
“11141” on page 1229
“11151” on page 1229
“11152” on page 1230
“11153” on page 1230
“11161” on page 1230
“11162” on page 1231
“11163” on page 1231
“11164” on page 1231
“11165” on page 1232
“11166” on page 1232
“11167” on page 1232
“11168” on page 1233
“11169” on page 1233
“11170” on page 1233
“11171” on page 1234
“11172” on page 1234
“11173” on page 1234
“11174” on page 1235
“11175” on page 1235
“11176” on page 1235
“11177” on page 1236
“11181” on page 1236
“11182” on page 1236
“11191” on page 1237
“11192” on page 1237
“11193” on page 1237
“11194” on page 1238
“11195” on page 1238

1224 www.honeywell.com
 3 ERROR CODES

3.50.1 11101
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_CHANNEL

Error name
Client - Invalid Channel

Cause
The Channel to start searching for free Channel numbers is NULL or negative.

Solution
Ensure a valid Channel number is provided to the API.

3.50.2 11102
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_RTU

Error name
Client - Invalid Controller

Cause
The Controller to start searching for free Controller numbers is NULL or negative

Solution
Ensure a valid Controller number is provided to the API.

3.50.3 11103
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_CHANNEL_COUNT

Error name
Client - Invalid Channel Count

Cause
A negative number of Channels was requested.

Solution
Ensure a positive number of Channels is requested.

1225
3 ERROR CODES

3.50.4 11104
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_RTU_COUNT

Error name
Client - Invalid Controller Count

Cause
A negative number of Controllers was requested.

Solution
Ensure a positive number of Controllers is requested.

3.50.5 11105
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_S_INVALID_CHANNEL

Error name
Server - Invalid Channel

Cause
The Channel to start searching for free Channel numbers is out of range.

Solution
Ensure a valid Channel number is provided to the API.

3.50.6 11106
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_S_INVALID_RTU

Error name
Server - Invalid RTU

Cause
The Controller to start searching for free Controller numbers is out of range

Solution
Ensure a valid Controller number is provided to the API.

1226 www.honeywell.com
 3 ERROR CODES

3.50.7 11107
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_S_GETCHNNO_FAIL

Error name
Server - Get Channel Number Fail

Cause
No free Channel numbers.

Solution
None.

3.50.8 11108
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_S_GETRTUNO_FAIL

Error name
Server - Get Controller Number Fail

Cause
No free Controller numbers.

Solution
None.

3.50.9 11121
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_NSS_COUNT

Error name
Client - Invalid Name Status Count

Cause
The number of entries in the array of name-status structures is less than zero.

Solution
Ensure the correct number of name-status structures is specified.

1227
3 ERROR CODES

3.50.10 11122
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_NSS

Error name
Client - Invalid Name Status Pointer

Cause
Pointer to array of name-status structures is null.

Solution
Ensure a correct name-status structures is specified.

3.50.11 11123
The results of the API are invalid, but the connection will remain good.

Error ID
HSC_C_INVALID_NSS_NAME

Error name
Client - Invalid Name

Cause
Name field in name status structure is too long.

Solution
Shorten the point name specified.

3.50.12 11131
These errors are only noted, and not acted upon.

Error ID
HSC_C_CLOSE_FAIL

Error name
Client - Close Fail

Cause
Unable to close the socket, usually due to a network or socket failure.

Solution
Ignore.

1228 www.honeywell.com
 3 ERROR CODES

3.50.13 11132
These errors are only noted, and not acted upon.

Error ID
HSC_C_ALREADY CLOSED

Error name
Client - Already Closed

Cause
The socket had already been closed probably due to a network problem.

Solution
Ignore.

3.50.14 11141
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_TIME

Error name
Client - Invalid Time

Cause
Pointer passed to the API to receive server time is NULL.

Solution
Pass a valid pointer for the server time.

3.50.15 11151
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_REV

Error name
Client - Invalid Revision

Cause
Pointer passed to the API to receive server revision is NULL.

Solution
Pass a valid pointer for the server revision.

1229
3 ERROR CODES

3.50.16 11152
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_REV_LENGTH

Error name
Client - Invalid Revision Length

Cause
Size of revision length buffer is negative.

Solution
Pass a valid size for the revision length buffer.

3.50.17 11153
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_REV_LENGTH_TOO_SHORT

Error name
Client - Revision Length too Short

Cause
Not used.

Solution
Not used.

3.50.18 11161
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_DSPBLD_INFILE

Error name
Client - Invalid Display Builder Input File

Cause
Input file was not specified.

Solution
Specify an input file.

1230 www.honeywell.com
 3 ERROR CODES

3.50.19 11162
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_DSPBLD_OUTFILE

Error name
Client - Invalid Display Builder Output File

Cause
Output file was not specified.

Solution
Specify an output file.

3.50.20 11163
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_S_INVALID_DSPBLD_INFILE

Error name
Server - Invalid Display Builder Input File

Cause
Input file does not exist, input file is read-only, or Server has no access permissions for the file.

Solution
Check that input file path is correct, it is not read-only and there is access permission for the manager account to
the file.

3.50.21 11164
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_S_INVALID_DSPBLD_OUTFILE

Error name
Server - Invalid Display Builder Output File

Cause
Output file is read-only or Server has no access permissions for the file.

1231
3 ERROR CODES

Solution
Check that output file is not read-only and there is access permission for the manager account to the file.

3.50.22 11165
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_S_DSPBLD_FAIL

Error name
Server - Display Builder Fail

Cause
The dspbld command line was too long, the dspbld command failed to run correctly, or the dspbld command
returned an unknown status.

Solution
Shorten the names of input and output files, try running the dspbld export directly on the server, or restart the
computer.

3.50.23 11166
The dspbld succeeded, but errors occurred during the dspbld.

Error ID
HSC_S_DSPBLD_ERROR

Error name
Server - Display Builder Error

Cause
There were errors during dspbld export.

Solution
Check the output file and correct errors.

3.50.24 11167
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_PRS_COUNT

Error name
Client - Invalid point reference array count

1232 www.honeywell.com
 3 ERROR CODES

Cause
A negative number of point reference elements in the array was specified.

Solution
Provide the correct positive number of elements in the array when calling the API.

3.50.25 11168
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_PRS

Error name
Client - Invalid point reference array

Cause
Pointer to array of point-ref structures is null.

Solution
Ensure a correct point-ref structures is specified.

3.50.26 11169
The results of the API function will be invalid, but the connection is good.

Error ID
HSC_C_INVALID_POINT_NAME

Error name
Client - Invalid Point Name

Cause
The point name specified in the point-ref structure is larger than is allowed, or may not be a null-terminated
string.

Solution
Ensure the point name is of the correct length and null terminated when calling the API.

3.50.27 11170
Confd has reported the output file passed to the bckbld utility was invalid.

Error ID
HSC_S_INVALID_BCKBLD_OUTFILE

Error name
Server - Invalid Back Build Output File

1233
3 ERROR CODES

Cause
Output file is read-only or Server has no access permissions for the file.

Solution
Check that output file is not read-only and there is access permission for the manager account to the file.

3.50.28 11171
Confd was unable to run bckbld.

Error ID
HSC_S_BCKBLD_FAIL

Error name
Server - Back Build Fail

Cause
The bckbld command line was too long, the bckbld command failed to run correctly, or the bckbld command
returned an unknown status.

Solution
Shorten the names of input and output files, try running the bckbld directly on the server, or restart the
computer.

3.50.29 11172
Bckbld returned an error to confd.

Error ID
HSC_S_BCKBLD_ERROR

Error name
Server - Back Build Error

Cause
There were errors during bckbld.

Solution
Check the output file and correct errors.

3.50.30 11173
Bckbld returned a warning to confd.

Error ID
HSC_S_BCKBLD_WARNING

1234 www.honeywell.com
 3 ERROR CODES

Error name
Server - Back Build Warning

Cause
There are warnings during bckbld.

Solution
Check the output file, and correct or ignore the warnings

3.50.31 11174
Bckbld is not licensed on the server.

Error ID
HSC_S_BCKBLD_NOT_LICENSED

Error name
Server - Back Build Not Licensed

Cause
Using bckbld command and bckbld is not licensed.

Solution
Obtain the appropriate license.

3.50.32 11175
HSCCLI has detected that the output file was invalid, the output file specified was null.

Error ID
HSC_C_INVALID_BCKBLD_OUTFILE

Error name
Client - Invalid Back Build Output File

Cause
Output file was not specified.

Solution
Specify an output file.

3.50.33 11176
HSCCLI has detected that invalid parameters are being passed.

Error ID
HSC_C_INVALID_BCKBLD_OPTIONS

1235
3 ERROR CODES

Error name
Client - Invalid Back Build Options

Cause
Not used.

Solution
Not used.

3.50.34 11177
The dspbld succeeded, but warnings occurred.

Error ID
HSC_S_DSPBLD_WARNING

Error name
None.

Cause
There are warnings during dspbld export.

Solution
Check the output file, and correct or ignore the warnings.

3.50.35 11181
The results of the API function are invalid, but the connection is good.

Error ID
HSC_C_INVALID_PNTBLD_OPTIONS

Error name
Client - Invalid Point Build Options

Cause
Not used.

Solution
Not used.

3.50.36 11182
The results of the API function are invalid, but the connection is good.

Error ID
HSC_C_INVALID_HDWBLD_OPTIONS

1236 www.honeywell.com
 3 ERROR CODES

Error name
None.

Cause
Options string for hdwbld was NULL.

Solution
A zero length options string should be provided rather than NULL, if no hdwbld options are required.

3.50.37 11191
hsc_c_confbck and hsc_c_confhdw only: HSCCLI has detected that the HDWBLD or BCKBLD options
parameter is NULL.
hsc_c_valarea only: The AREA_TYPE_STATUS structure passed to hsc_c_valarea is NULL.

Error ID
HSC_C_NO_AREA_NAMES

Error name
Client - No Area Name Structure

Cause
The pointer to the area-type-status structure was NULL.

Solution
Ensure a valid pointer for the area-type-status structure is passed to the API.

3.50.38 11192
An area name in the AREA_TYPE_STATUS structure passed to hsc_c_valarea may not be null-terminated or is
too long.

Error ID
HSC_C_INVALID_AREA_NAMES

Error name
Client - Invalid Area Name

Cause
The area name specified in the area-type-status structure is too long or may not be null-terminated.

Solution
Ensure the area name is an appropriate length and is null terminated.

3.50.39 11193
HSCCLI has detected that the NAME_TYPE_STATUS passed to hsc_c_valpntidtype is NULL.

1237
3 ERROR CODES

Error ID
HSC_C_INVALID_POINTIDTYPE_STRUCTURE

Error name
Client - Invalid Point Id and Type Structure

Cause
The pointer to the name-type-status structure was NULL.

Solution
Ensure a valid pointer for the name-type-status structure is passed to the API.

3.50.40 11194
HSCCLI P point name in the NAME_TYPE_STATUS structure passed to hsc_c_valpntidtype may not be null-
terminated or is too long.

Error ID
HSC_C_INVALID_NAME_ID_TYPE

Error name
Client - Invalid Point Name

Cause
The point name specified in the name-type-status structure is too long or may not be null-terminated.

Solution
Ensure the point name is an appropriate length and is null terminated.

3.50.41 11195
None.

Error ID
HSC_C_NO_NOTIFICATION

Error name
Client - No Notification details structure

Cause
The pointer to the notifications-details structure was NULL.

Solution
Ensure a valid pointer for the notifications-details structure is passed to the API.

1238 www.honeywell.com
 3 ERROR CODES

3.51 Codes 11201 to 11282

Related topics
“11201” on page 1239
“11211” on page 1240
“11221” on page 1240
“11222” on page 1240
“11231” on page 1241
“11232” on page 1241
“11233” on page 1241
“11234” on page 1242
“11235” on page 1242
“11236” on page 1242
“11237” on page 1243
“11238” on page 1243
“11239” on page 1243
“11240” on page 1244
“11250” on page 1244
“11251” on page 1244
“11252” on page 1245
“11253” on page 1245
“11254” on page 1245
“11255” on page 1246
“11256” on page 1246
“11257” on page 1246
“11260” on page 1247
“11270” on page 1247
“11271” on page 1247
“11272” on page 1248
“11273” on page 1248
“11280” on page 1249
“11281” on page 1249
“11282” on page 1249

3.51.1 11201
An error has occurred when passing parameters to an internal function call.

Error ID
HSC_PROGRAMMING_ERROR

Error name
Programming Error

Cause
Internal error.

1239
3 ERROR CODES

Solution
This should not occur. Call Technical Assistance.

3.51.2 11211
CONFD has detected that the protocol version used to communicate between it and HSCCLI is incorrect/
unknown.

Error ID
HSC_UNKNOWN_SOFTWARE_VERSION

Error name
Unknown Software Version

Cause
An invalid version of hsc_conf is used.

Solution
Ensure the current version of hsccli32.dll is being used.

3.51.3 11221
HSCCLI has detected that the history type specified in the call to hsc_c_getnumhst is not one of
HSC_C_SLOW_HISTORY, HSC_C_FAST_HISTORY or HSC_C_EXTD_HISTORY.

Error ID
HSC_C_INVALID_HISTORY_TYPE

Error name
Client - Invalid History Type

Cause
History type was not one of slow, fast, or extended.

Solution
Ensure a valid history type is specified.

3.51.4 11222
Not used.

Error ID
HSC_S_INVALID_HISTORY_TYPE

Error name
Server - Invalid History Type

1240 www.honeywell.com
 3 ERROR CODES

Cause
History type was not one of slow, fast, or extended.

Solution
Ensure a valid history type is specified.

3.51.5 11231
Invalid user Name.

Error ID
HSC_OPER_INVALID

Error name
OPERINVALID

Cause
Invalid operator ID or operator ID not found in database.

Solution
Confirm operator ID configuration and try again. Be sure password has not expired. Default password
expiration period is 30 days. Change Password Expiry Period and Password Validation Period to 0 days through
Station Operator Secuirty configuration, if you do not want the password to expire.

3.51.6 11232
Invalid user password.

Error ID
HSC_C_PWD_INCORRECT

Error name
PWDINCORRECT

Cause
The password does not match that of the specified operator.

Solution
Confirm password and try again. Be sure password has not expired. Default password expiration period is 30
days. Change Password Expiry Period and Password Validation Period to 0 days through Station Operator
Secuirty configuration, if you do not want the password to expire.

3.51.7 11233
Error reading user information from the database.

Error ID
HSC_OPER_INFO_READ_ERROR

1241
3 ERROR CODES

Error name
OPERREADERR

Cause
There was an error getting the information about the operator from the database

Solution
Try again.

3.51.8 11234
Null string is not allowed.

Error ID
HSC_C_NULL_ARGUMENT_POINTER

Error name
NULLPOINTER

Cause
A pointer argument was passed in with NULL value.

Solution
Provide a valid pointer.

3.51.9 11235
Empty string is not allowed.

Error ID
HSC_C_ARG_STRING_EMPTY

Error name
STRINGEMPTY

Cause
An Empty string, was passed to an API call, where a valid string is required.

Solution
Ensure required fields are entered.

3.51.10 11236
String is too long.

Error ID
HSC_C_ARG_STRING_TOO_BIG

1242 www.honeywell.com
 3 ERROR CODES

Error name
STRINGTOOBIG

Cause
A string argument was longer than the maximum length allowed for that item. For example, the maximum for
operator ID string is 4.

Solution
Reduce the string to a valid length and try again.

3.51.11 11237
Error reading license information.

Error ID
HSC_LIC_READ_ERR

Error name
LIC_READ_ERR

Cause
Option not licensed, license file missing or corrupted, or no access permission to Licence File.

Solution
Obtain the appropriate license, check that file exists, or ensure there is access permission to Licence File

3.51.12 11238
Invalid area.

Error ID
HSC_C_INVALID_AREA

Error name
INVALID_AREA

Cause
Not used.

Solution
Not used.

3.51.13 11239
Invalid station.

Error ID
HSC_C_INVALID_STATION

1243
3 ERROR CODES

Error name
INVALID_STATION

Cause
The station number pointer specified is NULL.

Solution
Provide a pointer to the appropriate station number for the API.

3.51.14 11240
Invalid point name.

Error ID
HSC_C_INVALID_PNTNAME

Error name
INVALID_PNTNAME

Cause
The point name pointer specified is NULL.

Solution
Provide a pointer to the appropriate point name for the API.

3.51.15 11250
Invalid pointer in script. Pointer is NULL

Error ID
HSC_C_INVALIDPOINTER

Error name
INVALIDPOINTER

Cause
Internal error - null pointer passed as a parameter, where a valid pointer is required.

Solution
None.

3.51.16 11251
Cannot Encode Packet

Error ID
HSC_C_ENCODEERROR

1244 www.honeywell.com
 3 ERROR CODES

Error name
ENCODEERROR

Cause
Unable to serialize a structure into a buffer, memory may be low

Solution
None.

3.51.17 11252
Cannot Decode Packet

Error ID
HSC_C_DECODEERROR

Error name
DECODEERROR

Cause
Unable to de-serialize a buffer into a structure, memory may be low, or buffer was corrupt.

Solution
None.

3.51.18 11253
Invalid argument in script on client.

Error ID
HSC_C_INVALIDARGUMENT

Error name
INVALIDARGUMENT

Cause
This should never occur.

Solution
None.

3.51.19 11254
Invalid argument in script on server.

Error ID
HSC_S_INVALIDARGUMENT

1245
3 ERROR CODES

Error name
INVALIDARGUMENT

Cause
This should never occur. Internal - the argument specified was invalid.

Solution
None.

3.51.20 11255
Cannot access script store.

Error ID
HSC_S_CANNOTACCESSSCRIPTSTORE

Error name
CANNOTACCESSSCRIPTSTORE

Cause
The scriptstore.dll is not registered.

Solution
Register scriptstore.dll on the server.

3.51.21 11256
Cannot resolve point in script.

Error ID
HSC_S_CANNOTRESOLVEPOINT

Error name
CANNOTRESOLVEPOINT

Cause
Point not configured properly, point database corrupted.

Solution
Reconfigure the point or restart the Server.

3.51.22 11257
Unknown point Server type.

Error ID
HSC_S_UNKNOWNPNTSRVTYPE

1246 www.honeywell.com
 3 ERROR CODES

Error name
UNKNOWNPNTSRVTYPE

Cause
None.

Solution
None.

3.51.23 11260
No details for point configuration.

Error ID
HSC_C_NO_DETAILS

Error name
NO_DETAILS

Cause
Empty reply from server.

Solution
Restart client Application or Server services.

3.51.24 11270
Server - Failed to Call hdwbckbld

Error ID
HSC_S_HDWBCKBLD_FAIL

Error name
HDWBCKBLD_FAIL

Cause
The hdwbckbld command line was too long, the hdwbckbld command failed to run correctly, or the hdwbckbld
command returned an unknown status.

Solution
Shorten the names of input and output files, try running the hdwbckbld directly on the server, or restart the
computer.

3.51.25 11271
Server - Cannot Write to Output File

1247
3 ERROR CODES

Error ID
HSC_S_HDWBCKBLD_INVALID_OUTFILE

Error name
HDWBCKBLD_INVALID_OUTFILE

Cause
Reported by the server if it cannot open the output file for write access when performing the server portion of a
hardware back build. Possible causes for this are: a zero length string was passed, the directory cannot be
accessed by the manager account on the server, and the file is already opened by another application.

Solution
Check that output file is not read-only and there is access permission for the manager account to the file.

3.51.26 11272
Server - Cannot Write to Output File

Error ID
HSC_C_HDWBCKBLD_INVALID_OUTFILE

Error name
HDWBCKBLD_INVALID_OUTFILE

Cause
Reported by the client when a NULL pointer is passed to hsc_c_confhdwbck for the fnOutFile parameter.
Output file was not specified.

Solution
Specify an output file.

3.51.27 11273
Item(s) in Argument List Not Configured.

Error ID
HSC_S_HDWBCKBLD_ITEM_NOT_CONFIGURED

Error name
HDWBCKBLD_ITEM_NOT_CONFIGURED

Cause
One or more options for hardware backbuild are invalid (not supported).

Solution
Check that the options are correct and remove those that are invalid.

1248 www.honeywell.com
 3 ERROR CODES

3.51.28 11280
Client - Authentication Failed

Error ID
HSC_C_AUTHENTICATION_FAILED

Error name
AUTHENTICATION_FAILED

Cause
User logon data is not correct. One or more of the following was incorrect (1) operator's Logon ID; (2)
operator's Domain; or (3) operator password.

Solution
Confirm valid user logon data and try again.

3.51.29 11281
Client - Authorization Failed

Error ID
HSC_C_AUTHORISATION_FAILED

Error name
AUTHORISATION_FAILED

Cause
User logon data is not correct.

Solution
Confirm valid user logon data and try again.

3.51.30 11282
Client - Failed to Create Client Helper Object

Error ID
HSC_C_INIT_FAIL_SEC_HELPER

Error name
INIT_FAIL_SEC_HELPER

Cause
Failed to create COM object for operator authentication and authorization.

1249
3 ERROR CODES

Solution
Ensure that the hsc_sec_clienthelper.dll is installed and registered on the client machine.

1250 www.honeywell.com
 3 ERROR CODES

3.52 Codes 12001 to 12099

Related topics
“12001” on page 1253
“12002” on page 1253
“12003” on page 1253
“12004” on page 1254
“12005” on page 1254
“12006” on page 1254
“12007” on page 1255
“12008” on page 1255
“12009” on page 1255
“12010” on page 1256
“12011” on page 1256
“12012” on page 1256
“12013” on page 1257
“12014” on page 1257
“12015” on page 1257
“12016” on page 1258
“12017” on page 1258
“12018” on page 1258
“12019” on page 1259
“12022” on page 1259
“12023” on page 1259
“12024” on page 1260
“12025” on page 1260
“12026” on page 1260
“12027” on page 1261
“12028” on page 1261
“12029” on page 1261
“12030” on page 1262
“12031” on page 1262
“12032” on page 1262
“12033” on page 1263
“12034” on page 1263
“12035” on page 1263
“12036” on page 1264
“12037” on page 1264
“12038” on page 1264
“12039” on page 1265
“12040” on page 1265
“12041” on page 1265
“12042” on page 1266
“12043” on page 1266
“12044” on page 1267
“12045” on page 1267
“12046” on page 1267

1251
3 ERROR CODES

“12047” on page 1268

“12048” on page 1268
“12049” on page 1268
“12050” on page 1269
“12051” on page 1269
“12052” on page 1269
“12053” on page 1270
“12054” on page 1270
“12055” on page 1270
“12056” on page 1271
“12057” on page 1271
“12058” on page 1271
“12059” on page 1272
“12060” on page 1272
“12061” on page 1272
“12062” on page 1273
“12063” on page 1273
“12064” on page 1274
“12065” on page 1274
“12066” on page 1274
“12067” on page 1275
“12068” on page 1275
“12069” on page 1275
“12070” on page 1276
“12071” on page 1276
“12072” on page 1276
“12073” on page 1277
“12074” on page 1277
“12075” on page 1277
“12076” on page 1278
“12077” on page 1278
“12078” on page 1278
“12079” on page 1279
“12080” on page 1279
“12081” on page 1279
“12082” on page 1280
“12083” on page 1280
“12084” on page 1280
“12085” on page 1281
“12086” on page 1281
“12087” on page 1281
“12088” on page 1282
“12089” on page 1282
“12090” on page 1282
“12091” on page 1283
“12092” on page 1283
“12093” on page 1283
“12094” on page 1284

1252 www.honeywell.com
 3 ERROR CODES

“12095” on page 1284

“12096” on page 1284
“12097” on page 1285
“12098” on page 1285
“12099” on page 1285

3.52.1 12001
Control Builder tpsresult - TEST ERROR1

Error ID
ERR_CBTEST1

Error name
CBTE1

Cause
Used in Developer test software only - this will never appear in the Released product.

Solution
None

3.52.2 12002
Control Builder tpsresult - TEST ERROR2

Error ID
ERR_CBTEST2

Error name
CBTE2

Cause
Used in Developer test software only - this will never appear in the Released product.

Solution
None

3.52.3 12003
Control Builder tpsresult - TEST ERROR3: Appears as a long string

Error ID
ERR_CBTEST3

Error name
CBTE3

1253
3 ERROR CODES

Cause
Used in Developer test software only - this will never appear in the released product

Solution
None

3.52.4 12004
Control Builder tpsresult - TEST ERROR4: Appears as a long string.

Error ID
ERR_CBTEST4

Error name
CBTE4

Cause
Used in Developer test software only - this will never appear in the released product.

Solution
None

3.52.5 12005
Undefined Control Builder Error

Error ID
ERR_UNDEFINED

Error name
UNDEF

Cause
None.

Solution
None.

3.52.6 12006
Control Library Returned <name> on Load

Error ID
ERR_CLLOADERR

Error name
CLLD

1254 www.honeywell.com
 3 ERROR CODES

Cause
None.

Solution
None.

3.52.7 12007
Control Library Returned Error Code <name>.

Error ID
ERR_CLHRERR

Error name
CLHR

Cause
None.

Solution
None.

3.52.8 12008
Monitor Thread Terminated Manually

Error ID
ERR_CBMTERMMONTHRD

Error name
CBMTERM

Cause
While the Control Builder was shutting down, it requested the monitor thread to terminate. The monitor thread
did not respond to the request and was terminated manually by the Control Builder.

Solution
None, the Control Builder will shut down.

3.52.9 12009
Manual Monitor Thread Termination Failed.

Error ID
ERR_CBMFLDTERMMONTHRD

Error name
CBMFLDTERM

1255
3 ERROR CODES

Cause
While the Control Builder was shutting down, it requested the monitor thread to terminate. The monitor thread
did not respond to the request and Control Builder was not able to terminate the thread manually.

Solution
None, the Control Builder will shut down.

3.52.10 12010
Invalid Monitor Thread Message, No Subscription ID exists.

Error ID
ERR_CBMMONTHRDNOSUBID

Error name
CBMNOSUBID

Cause
The Control Builder made a request to the monitor thread that required a subscription ID and there were none
set up (ask to delete items when none have been added). This should not occur, and is a result of a software
error.

Solution
Call Technical Assistance to report problem, shut down and restart Control Builder.

3.52.11 12011
Invalid Monitor Thread Message, No Subscription ID exists.

Error ID
ER_CBMMONTHRDINVMSG

Error name
CBMINVMSG

Cause
The Control Builder made a request to the monitor thread, monitor thread did not understand command. This
should not occur, and is a result of a software error.

Solution
Call Technical Assistance to report problem, shut down and restart the Control Builder.

3.52.12 12012
Unsupported Data Type

Error ID
ERR_CBDUNSUPPORTEDTYPE

1256 www.honeywell.com
 3 ERROR CODES

Error name
****

Cause
The parameter value cannot be monitored. The Control Builder or CDA does not support monitoring of the
parameter's data type. For example, parameters that have a data type of TC_STRUCT cannot be monitored.

Solution
None, the short name will be displayed in place of the parameter value.

3.52.13 12013
Error Fetching Parameter from Control Library

Error ID
ERR_CBDPARAM_FETCH

Error name
CBDPARAMFTCH

Cause
Could not obtain a parameter's value from the database.

Solution
None

3.52.14 12014
Error Fetching Parameter Name

Error ID
ERR_CBDNAME_FETCH

Error name
CBDNAMEFTCH

Cause
Could not obtain a Function Blockname from the database.

Solution
None

3.52.15 12015
Error Fetching Block Type

Error ID
ERR_CBDTYPE_FETCH

1257
3 ERROR CODES

Error name
CBDTYPEFTCH

Cause
Could not obtain a Function Blocktype from the database.

Solution
None

3.52.16 12016
Error Fetching 'NONE' data

Error ID
ERR_CBDNONE_FETCH

Error name
CBDNONEFTCH

Cause
Could not obtain the value of a non-parameter.

Solution
None

3.52.17 12017
Data in Unknown State.

Error ID
ERR_CBDUNKNOWN_STATE

Error name
CBDUNKNOWN

Cause
Experion PKS defect. Parameter is not in configuration or monitor mode.

Solution
Call Technical Assistance to report problem.

3.52.18 12018
Bad string supplied when writing to Control Library.

Error ID
ERR_CBDUNKNOWN_VALUESTRING

1258 www.honeywell.com
 3 ERROR CODES

Error name
CBDBADSTR

Cause
Lost user's input before it could be written to database.

Solution
Try again.

3.52.19 12019
Cannot connect to Control Library, LogonToCtrlSessions failed.

Error ID
ERR_CANNOTLOGIN

Error name
CANNOTLOGIN

Cause
Control Builder cannot find, or connect (Login) to the database. The database may not be installed correctly, its
name could be incorrect, and so on. The Experion PKS ER Server service may not be running. The Experion
PKS Server may not be running.

Solution
Be sure ER Server service and Experion PKS Server are running, and try again. Be sure your login password
has not expired.

3.52.20 12022
C100 Notifications startup (<name>) failed; errno = <name>.

Error ID
ERR_CBDC100NOTIFYERR

Error name
CBDC100NOTIFYERR

Cause
Windows NT could not startup the C100 Notifications program. It may not be installed properly, there may not
be enough memory available, and so on.

Solution
Close an unused application to free some memory, and try again.

3.52.21 12023
Not a Composite

1259
3 ERROR CODES

Error ID
ERR_CBD_NOT_COMPOSITE

Error name
CBDNOTCOMPOSITE

Cause
Attempting to drag-and-drop a non-composite (Basic Block) onto a Tree is not allowed.

Solution
None

3.52.22 12024
Cannot obtain item in which to add the new Composite.

Error ID
ERR_CBD_NO_ICONTROL

Error name
CBDNOICONTROL

Cause
Could not make a new object in the database.

Solution
Close an unused application to free some memory, and try again.

3.52.23 12025
Cannot make a new Composite.

Error ID
ERR_CBD_BAD_EMBCHILD

Error name
CBDBADEMBCHILD

Cause
The database could not add a new object.

Solution
Close an unused application to free some memory, and try again.

3.52.24 12026
Creation of Upload dialog box failed, upload canceled.

1260 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBU_FLDCREATEDLG

Error name
UPLDCREATEDLGFLD

Cause
Running out of system resources.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.25 12027
Allocation of Upload dialog box failed, upload canceled.

Error ID
ERR_CBU_FLDNEWDLG

Error name
UPLDDLGFLD

Cause
Running out of system resources.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.26 12028
Creation of Load dialog box failed, load canceled.

Error ID
ERR_CBL_FLDCREATEDLG

Error name
LOADCREATEDLGFLD

Cause
Running out of system resources.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.27 12029
Allocation of Load dialog box failed, load canceled.

1261
3 ERROR CODES

Error ID
ERR_CBL_FLDNEWDLG

Error name
LOADDLGFLD

Cause
Running out of system resources.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.28 12030
CContainerDoc contains CContainerItem

Error ID
ERR_CBDITEMINDOCUMENT

Error name
CBDITEMINDOCUMENT

Cause
This error occurs if any basic block is saved into document binary object (BLOB).

Solution
None.

3.52.29 12031
Cannot open Chart [CContainerDoc::OnOpenDocument: OLE Exception <name> thrown]

Error ID
ERR_CBDOPENDOCOLEEXCEPTION

Error name
CBDOPENDOCOLEEXCEPTION

Cause
When restoring from document binary object (BLOB), in serialization, OLE Exception is thrown.

Solution
None.

3.52.30 12032
Cannot open Chart [CContainerDoc::OnOpenDocument: Exception <name> thrown]

1262 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBDOPENDOCOTHEREXCEPTION

Error name
CBDOPENDOCOTHEREXCEPTION

Cause
When restoring from document binary object (BLOB), in serialization, any CException other than OLE
Exception is thrown.

Solution
None.

3.52.31 12033
Did not save <name> to database.

Error ID
ERR_CBDDIDNOTSAVEITEM

Error name
CBDDIDNOTSAVEITEM

Cause
This error occurs if any exception is thrown, when saving/serializing a basic block.

Solution
None.

3.52.32 12034
Failed to create <name> Module may not display all blocks.

Error ID
ERR_CBDDIDNOTCRETEITEM

Error name
CBDDIDNOTCRETEITEM

Cause
Failure to create root storage for the item.

Solution
None.

3.52.33 12035
Couldn't allocate global memory.

1263
3 ERROR CODES

Error ID
ERR_CBDCOULDNOTALLOCMEM

Error name
CBDCOULDNOTALLOCMEM

Cause
Failure to allocate global memory to copy data for saving or restoring of the document or function blocks.

Solution
Close other applications and try again.

3.52.34 12036
CContainerApp::SaveToCL Bad return 'GetHGlobalFromILockBytes()'

Error ID
ERR_CBDBADRETGETHGLOBAL

Error name
CBDBADRETGETHGLOBAL

Cause
Bad return from 'Get HGlobalFromILockBytes()' when saving the document or function blocks.

Solution
None.

3.52.35 12037
CContainerApp::RestoreFromCL No Blob Data for Restore

Error ID
ERR_CBDNOBLOBDATA

Error name
CBDNOBLOBDATA

Cause
No data in the blob.

Solution
None.

3.52.36 12038
Error in opening document. Refer to error log.

1264 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_OPENDOCUMENT

Error name
CBDOPENDOCUMENT

Cause
Failed to restore document from the Control Library.

Solution
None.

3.52.37 12039
Error in Saving the document. Refer to error log.

Error ID
ERR_CBDSAVEDOCUMENT

Error name
CBDSAVEDOCUMENT

Cause
When any exception is thrown in saving/serializing the document and non-basic block items.

Solution
None.

3.52.38 12040
Warning. Migration from old database. A new <name> will be created.

Error ID
ERR_CBDEMBEDDINGNOTEXIST

Error name
CBDEMBEDDINGNOTEXIST

Cause
Future in serialization when restoring from old database. This is not an error. It is only a message to let the user
know that he is migrating from an old database.

Solution
None.

3.52.39 12041
Could not create docfile for the document.

1265
3 ERROR CODES

Error ID
ERR_CBDCOULDNOTCREATEDOC

Error name
CBDCOULDNOTCREATEDOC

Cause
Failure to create root storage for the document.

Solution
None.

3.52.40 12042
Bad CtrlSession. Could not Save the chart.

Error ID
ERR_CBCBADCTRLSESSION

Error name
CBCBADCTRLSESS

Cause
Bad return from GetCtrlSession when saving the document.

Solution
None.

3.52.41 12043
Parameter Type for parameter <name> Not Supported at this time.

Error ID
ERR_CBD_PARAMTYPENOTSUPPORTED

Error name
CBDUNSUPPARAM

Cause
The parameter value does not support online changes because the Control Builder or CDA does not support
monitoring/online writes of the parameter data type. For example, parameters that have a data type of
TC_STRUCT cannot be monitored.

Solution
None value cannot be modified.

1266 www.honeywell.com
 3 ERROR CODES

3.52.42 12044
Parameter <name>cannot be changed from the loaded version
(Only monitored values or Server parameters may be modified from the loaded version).

Error ID
ERR_CBD_PARAMNOONLINECHANGE

Error name
CBDNOONLINEMOD

Cause
Parameter cannot be changed from the loaded version.

Solution
Make changes to the project version and load.

3.52.43 12045
Turn off monitoring to configure blocks.

Error ID
ERR_FBS_NOCONFIGUREMON

Error name
CBMMONOFF2CONFIG

Cause
Block configuration is not allowed while chart is monitoring.

Solution
Disable Chart monitoring to perform block configuration on the loaded version. To save changes to project
version, do Update from Loaded after loaded chart has been saved.

3.52.44 12046
Get Invisible Connection: error-(<name>)

Error ID
ERR_CBDFAILEDGETCONNDETAILS

Error name
CBDFLGETCONN

Cause
Delete Confirmation operation could not obtain information about connection(s) to the object selected for
deleting.

1267
3 ERROR CODES

Solution
None. Delete may proceed, without the 'Confirmation connection(s) notification,' but the user should exercise
caution.

3.52.45 12047
Failed to obtain connection tag name for block.

Error ID
ERR_CBDFAILEDGETCONNTAG

Error name
CBDFAILEDGETCONNTAG

Cause
Delete Confirmation operation could not obtain the name of connection(s) to the object selected for deleting.

Solution
None. Delete may proceed, without the 'Confirmation connection(s) notification,' but the user should exercise
caution.

3.52.46 12048
Cannot delete selected items - NO Database Session.

Error ID
ERR_CBDDELETENOSESSION

Error name
CBDDELETENOSESSION

Cause
In order to delete an object, the Control Builder must exchange information with the database. The database did/
could not provide a session in which to exchange this information.

Solution
None.

3.52.47 12049
You must first confirm a delete.

Error ID
ERR_CBDCONFIRMBEFOREDELETE

Error name
CBDCONFIRMBEFOREDELETE

1268 www.honeywell.com
 3 ERROR CODES

Cause
A Delete operation was attempted without first being confirmed.

Solution
None

3.52.48 12050
Failed to start transaction.

Error ID
ERR_CBDFAILEDSTARTTRAN

Error name
CBDFAILEDSTARTTRAN

Cause
Many operations are handled as a Transaction between the Control Builder and the database. For some reason,
the database did/could not begin a Transaction.

Solution
Try again.

3.52.49 12051
Failed to commit transaction.

Error ID
ERR_CBDFAILEDCOMMITTRAN

Error name
CBDFAILEDCOMMITTRAN

Cause
Many operations are handled as a Transaction between the Control Builder and the database. For some reason,
the database did/could not complete a Transaction.

Solution
Try again.

3.52.50 12052
Cannot obtain Control pointer for selected item(s).

Error ID
ERRCBDNOICONTROLFORDELETE

1269
3 ERROR CODES

Error name
CBDNOICONTROLFORDELETE

Cause
The database does not recognize the object selected for deleting.

Solution
None.

3.52.51 12053
Cannot delete this handler - it has NO control ID.

Error ID
ERR_CBDSCMNOHANDLERCTRLID

Error name
CBDSCMNOHANDLERCTRLID

Cause
The database does not recognize the Handler selected for deleting.

Solution
None.

3.52.52 12054
Could not allocate memory for write buffer.

Error ID
ERR_CBMALLOCONWRITE

Error name
CBMALLOCFLDWRITE

Cause
Ran out of memory.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.53 12055
Unsupported VAR TYPE on write.

Error ID
ERR_CBM_UNSUPPORTED_VT

1270 www.honeywell.com
 3 ERROR CODES

Error name
CBMUNSUPVT

Cause
Software error.

Solution
Call Technical Assistance to report problem, try again.

3.52.54 12056
ProcessSingleMonitorElement failed, see error log for more details

Error ID
ERR_CBM_PROCSINGLEMONELE

Error name
CBMSGLMONELE

Cause
Obsolete?

Solution
None.

3.52.55 12057
Failed to remove deleted single element from key list

Error ID
ERR_CBM_DELSINGLE_NOTINLIST

Error name
CBMSNGLREMFLD

Cause
Obsolete?

Solution
None.

3.52.56 12058
ProcessSingleItem failed, see error log for more details.

Error ID
ERR_CBM_PROCSINGLEITEM

1271
3 ERROR CODES

Error name
CBMSNGLEITEMFLD

Cause
A failure occurred while Control Builder was setting up an item to be monitored. Underlying functions should
log specific error.

Solution
None.

3.52.57 12059
Post monitor thread message failed

Error ID
ER_CBM_POSTMONTHREADMESSAGE

Error name
CBMMONTHRDMSG

Cause
Failure occurred while the Control Builder was making a request to initiate or terminate monitoring, or trigger
an update. The message was not sent to the monitor thread probably due to a problem with system resources.

Solution
Call Technical Assistance to report problem. Shut down system and restart.

3.52.58 12060
WriteMultipleData failed when setting up write request, see error log for more details.

Error ID
ERR_CBM_SETMULTIWRITEPROCSINGLE

Error name
CBMINITSNGLWRITE

Cause
A failure occurred while the Control Builder was making an online write request. Underlying functions should
log specific error.

Solution
None.

3.52.59 12061
WriteMultipleData failed when cleanup up write request, see error log for more details.

1272 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBM_DONEMULTIWRITEPROCSINGLE

Error name
CBMCLNUPSNGLWRITE

Cause
A failure occurred while the Control Builder was making an online write request to multiple parameters.
Underlying functions should log specific error.

Solution
None.

3.52.60 12062
Tree monitoring not fully functional for request/response.

Error ID
ERR_CBM_SINGLENOTSUPPORT_REQRESP

Error name
CBMNOTREEMONREQRESP

Cause
The Control Builder setup in registry to monitor using request/response. Tree monitoring is only setup to
monitoring using publish/subscribe.

Solution
Change registry entry to specify publish/subscribe:
HKEY_CURRENT_USER\Software\Honeywell\TPS50SYS\CTRLBLDR\Control Builder\Monitor CDA Type
= Pub/Sub

3.52.61 12063
Failed to allocate new pinfo array.

Error ID
ERR_CBT_PINFOALLOCFLD

Error name
CBTPINFOALLOCFLD

Cause
Running out of memory.

Solution
Call Technical Assistance to report problem. Shutdown and restart system.

1273
3 ERROR CODES

3.52.62 12064
Failed to allocate name for tree.

Error ID
ERR_CBT_ALL0CNAME

Error name
CBTALLOCNAME

Cause
Running out of memory.

Solution
Call Technical Assistance to report problem. Shutdown and restart system.

3.52.63 12065
Failed to insert item into the tree.

Error ID
ERR_CBT_INSITEMFLD

Error name
CBTINSITEMFLD

Cause
Problem with system resources.

Solution
Call Technical Assistance to report problem. Shutdown and restart system.

3.52.64 12066
Failed to allocate name for tree.

Error ID
ERR_CBTM_ALLOCMONFLD

Error name
CBTALLOCNAME

Cause
Running out of memory.

Solution
Call TAC to report the problem. Shutdown and restart the system.

1274 www.honeywell.com
 3 ERROR CODES

3.52.65 12067
Cannot get a timer for tree monitoring.

Error ID
ERR_CBTM_CANTGETTIMER

Error name
CBTMCANTGETTIMER

Cause
No more timers available in the system.

Solution
Call Technical Assistance to report problem. Shutdown monitoring charts or other applications that use timers.

3.52.66 12068
Could not allocate memory for tagged data object.

Error ID
ERR_CBT_TAGGEDDATAALLOCFLD

Error name
CBTTAGDATAALLOCFLG

Cause
Running out of memory.

Solution
Call Technical Assistance to report problem. Shutdown and restart system.

3.52.67 12069
Could not allocate memory for hondata element in tagged data object.

Error ID
ERR_CBT_TAGGEDHONDATAALLOCFLD

Error name
CBTTAGHONDATAALLOCFLD

Cause
Running out of memory.

Solution
Call Technical Assistance to report problem. Shutdown and restart system.

1275
3 ERROR CODES

3.52.68 12070
Low memory condition: Module may not display all blocks.
Close any open charts or other applications to increase memory, and retry.

Error ID
ERR_CBDLOWMEMORY

Error name
CBDLOWMEMORY

Cause
Could not instantiate Function Block (CContainer Item) in a chart. Probably not enough memory to create the
basic block.

Solution
None.

3.52.69 12071
Could not open <name>.OLE Exception thrown.

Error ID
ERR_CBDOPENITEMOLEEXCEPTION

Error name
CBDOPENITEMOLEEXCEPTION

Cause
OLE Exception is thrown in restoring from basic block binary object (BLOB).

Solution
None.

3.52.70 12072
Could not open <name>.Exception thrown.

Error ID
ERR_CBDOPENITEMEXCEPTION

Error name
CBDOPENITEMEXCEPTION

Cause
Any CException is thrown in restoring from basic block binary object (BLOB).

1276 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.52.71 12073
Unable to make Data-driven block for serialization

Error ID
ERR_CBF_MAKEDDBLOCK

Error name
FBSMAKDDBLK

Cause
Lack of available memory is the most likely cause.

Solution
Close unused application(s) and try again.

3.52.72 12074
Unable to make new Data-driven block.

Error ID
ERR_CBF_MAKENEWDDBLOCK

Error name
FBSMAKNEWDDBLK

Cause
The most likely cause is lack of available memory.

Solution
Close unused application(s) and try again.

3.52.73 12075
Unable to make Function Block object for serialization

Error ID
ERR_CBF_MAKEHONOBJ

Error name
FBSMAKHONOBJ

Cause
The most likely cause is lack of available memory.

1277
3 ERROR CODES

Solution
Close unused application(s) and try again.

3.52.74 12076
Cannot obtain OCX (<name>) ID for block <name> (OCX might not be registered)
(OCX might not be registered)
Correct the problem and retry.

Error ID
ERR_CBF_NOOCXID

Error name
CBF_NOOCXID

Cause
The most likely causes are the OCX is not installed, or the OCX is not registered.

Solution
None.

3.52.75 12077
Could not obtain the Parameter pointer for variable <name>.

Error ID
ERR_FBS_VARNOTFOUND

Error name
FBSVARNOTFOUND

Cause
It is possible there is a mismatch between the Control Builder and the Control Library.

Solution
None.

3.52.76 12078
Error is obsolete.

Error ID
ERR_CBFM_FLDGETCMTEMPLATE

Error name
CBFMFLDGETCMTEMPLATE

1278 www.honeywell.com
 3 ERROR CODES

3.52.77 12079
Error is obsolete.

Error ID
ERR_CBFM_FLDGETSCMTEMPLATE

Error name
CBFMFLDGETSCMTEMPLATE

Cause
None.

Solution
None.

3.52.78 12080
Could not allocate new chart.

Error ID
ERR_CBS_FLDALLOCCHART

Error name
CBSFLDALLOCCHART

Cause
Failed to allocate a new chart for handler.

Solution
Close unused applications and try again.

3.52.79 12081
WARNING: Failure to reload the Control Module to the Controller (CEE) after unassigning this IO channel
may cause bad IO behavior in the Controller.

Error ID
ERR_FBS_UNASSIGNLOADEDIOC

Error name
FBSUNASSIGNLOADEDIOC

Cause
This message does not indicate an error, but rather warns the user to reload the Control Module after
unassigning an IO channel to avoid bad IO behavior in the Controller. For example, f the Control Module is not
reloaded it is possible for different control algorithms to contend for, rather than control the same output

1279
3 ERROR CODES

channel. This warning message is displayed only if the Control Module which contains the IO channel has
previously been loaded to the controller.

Solution
None.

3.52.80 12082
Could not open parent block.

Error ID
ERR_CBFM_CANTOPENPARENT

Error name
CBFMCANTOPENPARENT

Cause
Error occurred when attempting to create a new hardware block. The Control Library error which caused this
will be included in the error string.

Solution
Refer to the CL Error for more information.

3.52.81 12083
Could not create <name>.

Error ID
ERR_CBFM_CANTCREATEBLOCK

Error name
CBFMCANTCREATEBLOCK

Cause
Hardware block could not be created. The Control Library error which caused this problem will be included in
the error string.

Solution
Refer to the CL Error for more information.

3.52.82 12084
Could not set endian attribute of <name>.

Error ID
ERR_CBFM_CANTSETENDIAN

Error name
CBFMCANTSETENDIAN

1280 www.honeywell.com
 3 ERROR CODES

Cause
Internal properties associated with the creation of a new hardware block could not be set in the database. A
more explicit Control Library error is included in the error string.

Solution
Refer to the CL Error for more information.

3.52.83 12085
Could not set EE Code of <name>.

Error ID
ERR_CBFM_CANTSETEECODE

Error name
CBFMCANTSETEECODE

Cause
Internal properties associated with the creation of a new hardware block could not be set in the database. A
more explicit Control Library error is included in the error string.

Solution
Refer to the CL Error for more information.

3.52.84 12086
Could not set Communication Path of <name>.

Error ID
ERR_CBFM_CANTSETCOMMPATH

Error name
CBFMCANTSETCOMMPATH

Cause
Internal properties associated with the creation of a new hardware block could not be set in the database. A
more explicit Control Library error is included in the error string.

Solution
Refer to the CL error description for more information.

3.52.85 12087
Unable to make new <name> block.

Error ID
ERR_FBS_UNABLETOMAKEBLOCK

1281
3 ERROR CODES

Error name
FBSUNABLETOMAKEBLOCK

Cause
Generic error message that occurs when creating a HONObject fails. The name of the block is embedded in the
message.

Solution
Close unused applications and try again.

3.52.86 12088
Null Control Library pointer, cannot make Configuration Form.

Error ID
ERR_FBS_CANNOTMAKECFGFORM

Error name
FBSCANNOTMAKECFGFORM

Cause
Generic error message that occurs when a null pointer returned on making a Configuration Form. The name of
the block is embedded in this message.

Solution
None.

3.52.87 12089
Help file name not found in <name>'s resources.

Error ID
ERR_FBS_HELPFILENOTFOUND

Error name
FBSHELPFILENOTFOUND

Cause
Cannot find help file.

Solution
None.

3.52.88 12090
Could not delete connection.

1282 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_FBS_FLDDELETECONNECTION

Error name
FBSFLDDELETECONNECTION

Cause
Failed to delete connection between CM.SCMMONSRC and SCM.MONITOR.

Solution
None.

3.52.89 12091
Could not make connection.

Error ID
ERR_FBS_FLDMAKECONNECTION

Error name
FBSFLDMAKECONNECTION

Cause
Fails to make connection between CM.SCMMONSRC and SCM.MONITOR.

Solution
None.

3.52.90 12092
Expression Parser API call failed.

Error ID
ERR_FBS_FLDEXPPARSERAPI

Error name
FBSFLDEXPPARSERAPI

Cause
None.

Solution
None.

3.52.91 12093
Function block common resource dll's name not found in <name>'s resources.

1283
3 ERROR CODES

Error ID
ERR_FBS_FBSYMRESDLLNAMENOTFOUND

Error name
FBSYMRESDLLNAMENOTFOUND

Cause
Failed to load function block symbol resource dll.

Solution
None.

3.52.92 12094
Function block resource dll's name not found in <name>'s resources.

Error ID
ERR_FBS_FBRESDLLNAMENOTFOUND

Error name
FBRESDLLNAMENOTFOUND

Cause
Failed to load function block resource dll.

Solution
None.

3.52.93 12095
Error obtaining Parameter Groups, cannot make Configuration Form.

Error ID
ERR_FBS_DDCFGFLDOBTAINGROUP

Error name
FBSDDCFGFLDOBTAINGROUP

Cause
Null pointer was returned for parameter group of data driven form.

Solution
None.

3.52.94 12096
Exception caught while making Configuration Form.

1284 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_FBS_DDFORMEXCEPTIONTHROWN

Error name
FBSDDFORMEXCEPTIONTHROWN

Cause
Problem making data driven form.

Solution
None.

3.52.95 12097
Error obtaining Parameter Groups, cannot setup block.

Error ID
ERR_FBS_DDBLKFLDOBTAINGROUP

Error name
FBSDDBLKFLDOBTAINGROUP

Cause
Null pointer is returned for parameter group of data driven block.

Solution
None.

3.52.96 12098
CFbsymCtrl::SetupBrush (HANDLE) CResourceException Thrown.

Error ID
ERR_FBS_BRUSHRESEXPTHROWN

Error name
FBSBRUSHRESEXPTHROWN

Cause
Error in setting up the brush.

Solution
None.

3.52.97 12099
CFbsymCtrl::SetupBrush (HANDLE) CMemory Exception thrown.

1285
3 ERROR CODES

Error ID
ERR_FBS_BRUSHMEMEXPTHROWN

Error name
FBSBRUSHMEMEXPTHROWN

Cause
Not enough memory for setting up the brush.

Solution
Close unused applications and try again.

1286 www.honeywell.com
 3 ERROR CODES

3.53 Codes 12100 to 12199

Related topics
“12100” on page 1289
“12101” on page 1289
“12102” on page 1289
“12103” on page 1290
“12104” on page 1290
“12105” on page 1290
“12106” on page 1291
“12107” on page 1291
“12108” on page 1291
“12109” on page 1292
“12110” on page 1292
“12111” on page 1292
“12112” on page 1293
“12113” on page 1293
“12114” on page 1293
“12115” on page 1294
“12116” on page 1294
“12117” on page 1294
“12118” on page 1295
“12119” on page 1295
“12120” on page 1295
“12121” on page 1296
“12122” on page 1296
“12123” on page 1296
“12124” on page 1297
“12125” on page 1297
“12126” on page 1297
“12127” on page 1298
“12128” on page 1298
“12129” on page 1298
“12130” on page 1299
“12131” on page 1299
“12132” on page 1299
“12133” on page 1300
“12134” on page 1300
“12135” on page 1300
“12136” on page 1301
“12137” on page 1301
“12138” on page 1302
“12139” on page 1302
“12140” on page 1302
“12141” on page 1303
“12142” on page 1303
“12143” on page 1304

1287
3 ERROR CODES

“12144” on page 1304

“12145” on page 1304
“12146” on page 1305
“12147” on page 1305
“12148” on page 1305
“12149” on page 1306
“12150” on page 1306
“12151” on page 1307
“12152” on page 1307
“12153” on page 1307
“12154” on page 1308
“12155” on page 1308
“12156” on page 1308
“12157” on page 1309
“12158” on page 1309
“12159” on page 1309
“12160” on page 1310
“12161” on page 1310
“12162” on page 1310
“12163” on page 1311
“12164” on page 1311
“12165” on page 1311
“12166” on page 1312
“12167” on page 1312
“12168” on page 1312
“12169” on page 1313
“12170” on page 1313
“12171” on page 1313
“12172” on page 1314
“12173” on page 1314
“12174” on page 1314
“12175” on page 1315
“12176” on page 1315
“12177” on page 1315
“12178” on page 1316
“12179” on page 1316
“12180” on page 1316
“12181” on page 1317
“12182” on page 1317
“12183” on page 1318
“12184” on page 1318
“12185” on page 1318
“12186” on page 1319
“12187” on page 1319
“12188” on page 1319
“12189” on page 1320
“12190” on page 1320
“12191” on page 1320

1288 www.honeywell.com
 3 ERROR CODES

“12192” on page 1321

“12193” on page 1321
“12194” on page 1321
“12195” on page 1322
“12196” on page 1322
“12197” on page 1322
“12198” on page 1323
“12199” on page 1323

3.53.1 12100
CFbsymCtrl::SetupPen (HANDLE) CResourceException thrown.

Error ID
ERR_FBS_PENRESEXPTHROWN

Error name
FBSPENRESEXPTHROWN

Cause
Error in setting up the pen.

Solution
Close unused applications and try again.

3.53.2 12101
CFbsymCtrl::SetupPen (HANDLE) CMemory Exception thrown.

Error ID
ERR_FBS_PENMEMEXPTHROWN

Error name
FBSPENMEMEXPTHROWN

Cause
Not enough memory for setting up the pen.

Solution
Close unused applications and try again.

3.53.3 12102
Could not get timer, Form is not monitoring. Press OK to continue to open the form.

Error ID
ERR_FBS_FLDTOGETTIMER

1289
3 ERROR CODES

Error name
FBSFLDTOGETTIMER

Cause
Failed to setup the draw timer event and to trigger the OnTimer function.

Solution
Hit cancel to turn off the monitoring.

3.53.4 12103
This error is obsolete.

Error ID
ERR_FBS_NOAVAILABLETIMER

Error name
FBSNOAVALABLETIMER

Cause
None.

Solution
None.

3.53.5 12104
FATAL ERROR: IControlPointer is invalid.

Error ID
ERR_FBS_INVALIDICTRLPTR

Error name
FBSINVALIDICTRLPTR

Cause
Invalid IControl pointer is returned for block object.

Solution
None.

3.53.6 12105
FATAL ERROR: IControlSessionPointer is invalid.

Error ID
ERR_FBS_INVALIDICTRLSESSIONTPR

1290 www.honeywell.com
 3 ERROR CODES

Error name
FBSINVALIDICTRLSESSIONTPR

Cause
Invalid IControlSession pointer is returned for block object.

Solution
None.

3.53.7 12106
Checked and unchecked states must be different for <name>.

Error ID
ERR_FBS_SAMECHECKSTATES

Error name
FBSSAMECHECKSTATES

Cause
The check box setup is incorrect.

Solution
Make sure that the checked state and unchecked state of a checkbox are different.

3.53.8 12107
One of checkedState or unchecked State must be ZERO for <name>.

Error ID
ERR_FBS_NOZEROSTATE

Error name
FBSNOZEROSTATE

Cause
One of checked or unchecked states must be zero.

Solution
None.

3.53.9 12108
Must not use check box for <name>. (the numEnum ! = 2)

Error ID
ERR_FBS_MORETHAN2STATES

1291
3 ERROR CODES

Error name
FBSMORETHAN2STATES

Cause
The check box was used for an enumeration with more than two items.

Solution
Use combo box for configuring.

3.53.10 12109
No matching ordinal for checked state for parameter.

Error ID
ERR_FBS_NOCHECKEDORDINALMATCH

Error name
FBSNOCHECKEDORDINALMATCH

Cause
No match found for the checked state.

Solution
Modify the checked state to an existing ordinal.

3.53.11 12110
No matching ordinal for unchecked state for parameter <name>.

Error ID
ERR_FBS_NOUNCHECKEDORDINALMATCH

Error name
FBSNOUNCHECKEDORDINALMATCH

Cause
No match found for the unchecked state.

Solution
Modify the unchecked state to an existing ordinal.

3.53.12 12111
<name> cannot be used for check box.
Parameter should be Boolean or Enumeration.

Error ID
ERR_FBS_WRONGTYPEFORCHECKBOX

1292 www.honeywell.com
 3 ERROR CODES

Error name
FBSWRONGTYPEFORCHECKBOX

Cause
The parameter type must be Boolean or enumeration to use checkbox.

Solution
Use another GUI control.

3.53.13 12112
Invalid name; change cannot be made.

Error ID
ERR_FBS_INVALIDNAME

Error name
FBSINVALIDNAME

Cause
Invalid name entered.

Solution
Use a different name.

3.53.14 12113
Cannot change name while monitoring.

Error ID
ERR_FBS_CANNOTCHANGENAME

Error name
FBSCANNOTCHANGENAME

Cause
Attempted to change name while monitoring.

Solution
Turn off monitoring, then change name.

3.53.15 12114
Error obtaining InvParameter for Variable.

Error ID
ERR_FBS_INVPARAMPTRFORVAR

1293
3 ERROR CODES

Error name
FBSINVPARAMPTRFORVAR

Cause
Null InvParameter pointer is returned.

Solution
None.

3.53.16 12115
Error obtaining InvParameter for Parameter.

Error ID
ERR_FBS_INVPARAMPTRFORPARAM

Error name
FBSINVPARAMPTRFORPARAM

Cause
Null InvParameter pointer is returned.

Solution
None.

3.53.17 12116
This Error is obsolete.

Error ID
ERR_FBS_CANNOTLOADHELPFILE

Error name
FBSCANNOTLOADHELPFILE

Cause
None.

Solution
None.

3.53.18 12117
Could not get Variable Name.

Error ID
ERR_FBS_FLDGETVARNAME

1294 www.honeywell.com
 3 ERROR CODES

Error name
FBSFLDGETVARNAME

Cause
Failed to get variable name.

Solution
None.

3.53.19 12118
Variable '<name>' could not be found in the list.

Error ID
ERR_FBS_VARNOTINLIST

Error name
FBSVARNOTINLIST

Cause
Failed to get InvParameter pointer for variable when adding a symbol or pin.

Solution
None.

3.53.20 12119
Selected Variable '<name>' could not be found in the list.

Error ID
ERR_FBS_SELECTEDVARNOTINLIST

Error name
FBSSELECTEDVARNOTINLIST

Cause
Failed to get InvParameter pointer for variable when changing selection in the list.

Solution
None.

3.53.21 12120
<name> cannot load ID.

Error ID
ERR_FBS_FLDLOADRESOURCEID

1295
3 ERROR CODES

Error name
FBSFLDLOADRESOURCEID

Cause
Failed to load help file name.

Solution
None.

3.53.22 12121
Pin may not be deleted because it is the passive end of a connection. This may not be supported in the current
release. Manually delete the wire from Control Builder.

Error ID
ERR_FBS_CANNOTDELPASSIVEEND

Error name
FBSCANNOTDELPASSIVEEND

Cause
User attempted to remove a pin from a block symbol when that pin is connected to something.

Solution
Manually delete the wire from Control Builder.

3.53.23 12122
Connector '<name>' has NULL ParamID. Will try to recover.

Error ID
ERR_FBS_CONNHASNULLPARAMID

Error name
FBSCONNHASNULLPARAMID

Cause
When connection was in progress, a pin with a parameter ID of zero was double clicked.

Solution
None.

3.53.24 12123
Connector'<name>' could not be found in the list.

Error ID
ERR_FBS_PINNOTINLIST

1296 www.honeywell.com
 3 ERROR CODES

Error name
FBSPINNOTINLIST

Cause
Failed to get InvParameter pointer for the parameter.

Solution
None.

3.53.25 12124
Flat Index mismatch in Connector '<name>'.

Error ID
ERR_FBS_FLATINDEXMISMATCH

Error name
FBSFLATINDEXMISMATCH

Cause
Flat index of a parameter is not equal to ParamIdx.

Solution
None.

3.53.26 12125
Error loading page title name.

Error ID
ERR_FBS_CANLOADPAGETITLE

Error name
FBSCANLOADPAGETITLE

Cause
This error occurs when the wrong resource handle is used or the ID resource is missing.

Solution
Very the installation and try again.

3.53.27 12126
CFbsymCtrl;;CL Parameter Names display not supported in this release.

Error ID
ERR_FBS_DISPLAYNAMENOTSUPPORTED

1297
3 ERROR CODES

Error name
FBSDISPLAYNAMENOTSUPPORTED

Cause
Caused by clicking Select CL Parameter button on Symbol property.

Solution
None.

3.53.28 12127
Failed to load resources format.

Error ID
ERR_FBS_FLDTOLOADRESOURCES

Error name
FBSFLDTOLOADRESOURCES

Cause
None.

Solution
None.

3.53.29 12128
Couldn't open drawing.

Error ID
ERR_CBDFLDOPENDRAWING

Error name
CBDFLDOPENDRAWING

Cause
Null pointer for document.

Solution
None.

3.53.30 12129
C100 Notifications is not supported.

Error ID
ERR_CBDC100NOTIFYNOTSUPPORTED

1298 www.honeywell.com
 3 ERROR CODES

Error name
CBDC100NOTIFYNOTSUPPORTED

Cause
None.

Solution
None.

3.53.31 12130
Error from GetView IDs.

Error ID
ERR_CBDGETVIEWIDERR

Error name
CBDGETVIEWIDERR

Cause
Null view ID for drawing.

Solution
None.

3.53.32 12131
Could not get variable name for variable following <name>.

Error ID
ERR_FBS_FLDGETVARNAMEAFTER

Error name
FBSFLDGETVARNAMEAFTER

Cause
Failed to get the variable name. Reporting the variable name before it.

Solution
None.

3.53.33 12132
<name> Could not make connection #<name> of Expression #<name>.

Error ID
ERR_CBS_COULDNOTMAKECONN

1299
3 ERROR CODES

Error name
CBSCOULDNOTMAKECONN

Cause
The final displayed error message embeds the error message returned by ICtrlSession::MakeConnection(),
reporting the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.34 12133
<name> Could not delete connection #<name> of Expression #<name>.

Error ID
ERR_CBS_COULDNOTDELETECONN

Error name
CBSCOULDNOTDELETECONN

Cause
The final displayed error message embeds the error message returned by IControl::DelConnection(), reporting
the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.35 12134
<name> Could not re-make connection of Expression # <name>.

Error ID
ERR_CBS_COULDNOTREMAKECONN

Error name
CBSCOULDNOTREMAKECONN

Cause
During an operation of Expression Moving Up/Down or Expression Deletion, the final displayed error message
embeds the error message returned by ICtrlSession::MakeConnection(), reporting the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.36 12135
<name> Could not make connection to Destination of Output # <name>.

1300 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBS_COULDNOTMAKEDESTCONN

Error name
CBSCOULDNOTMAKEDESTCONN

Cause
The final displayed error message embeds the error message returned by ICtrlSession::MakeConnection(),
reporting the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.37 12136
<name> Could not delete connection to Destination of Output #<name>.

Error ID
ERR_CBS_COULDNOTDELDESTCONN

Error name
CBSCOULDNOTDELDESTCONN

Cause
The final displayed error message embeds the error message returned by IControl::DelConnection(), reporting
the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.38 12137
Existence of connection to Op[<name>].DsntCtrlReq disables Output deletion.

Error ID
ERR_CBS_STEPDISABLEOUTDEL

Error name
CBSSTEPDISABLEOUTDEL

Cause
If there is a connection established to OP[n].DsntCtrlReq, the deletion operation of Output Expression #n is not
allowed.

Solution
Explicitly delete connection to Op[n].DsntCtrlReq before trying to delete Output Expression #n.

1301
3 ERROR CODES

3.53.39 12138
Error in Gate S: Gate Type '<name>' incompatible with '<name>' input(s).

Error ID
ERR_CBS_TRANSSECGATECONFERROR

Error name
CBSTRANSSECGATECONFERROR

Cause
Configuration of Secondary Gate's Type is incompatible with the number of inputs assigned to the Gate (for
example, 0 inputs should be configured for 'None', 'On' and 'Off' Gates; 1 input for 'Connect' and 'Not' Gates and
2 inputs for 'Xor' Gates).

Solution
Change the Condition assignment (that is, to which Gate each Condition is assigned to) or change the Gate Type
to compatible settings.

3.53.40 12139
Error in Gate P<name>: Gate Type '<name>' incompatible with '<name>' Condition(s) assigned to it.

Error ID
ERR_CBS_TRANSPRIGATECONFERROR

Error name
CBSTRANSPRIGATECONFERROR

Cause
Configuration of Primary Gate's Type is incompatible with the number of Conditions assigned to the Gate (for
example, 0 inputs should be configured for 'None', 'On' and 'Off' Gates; 1 input for 'Connect' and 'Not' Gates and
2 inputs for 'Xor' Gates).

Solution
Change the Condition assignment (that is, to which Gate each Condition is assigned to) or change the Gate Type
to compatible settings.

3.53.41 12140
Setting the Gate Assignment for Conditions > <name> to 'GateP<name>' to avoid 'gaps'.

Error ID
ERR_CBS_TRANSAVOIDGAPS

Error name
CBSTRANSAVOIDGAPS

1302 www.honeywell.com
 3 ERROR CODES

Cause
To avoid 'gaps' or 'crossings' of assignments among Conditions and Gates, the Gate assignments (that is, to
which Gate a determined Condition is assigned to) of some Conditions are changed. If the configuration of Gate
assignment for Condition #n triggers the adjustment, the Gate assignments for Condition > n will be affected.
The displayed error message reports which Conditions will be affected and to which value the Gate assignments
will be changed.

Solution
None.

3.53.42 12141
WARNING: Failed to read original Gate Assignments. Cancelling may not restore the original Gate
Assignments correctly.

Error ID
ERR_CBS_FLDREADORIGGATEASGN

Error name
CBSFLDREADORIGGATEASGN

Cause
Original values for the Gate Assignments are collected and buffered when the SCM Transition Configuration
Form is displayed in case we later need to 'Cancel' the form. For an unknown reason, the reading of one or more
Gate Assignment values failed. Canceling may not restore the original Gate Assignments correctly.

Solution
Do not 'Cancel' form.

3.53.43 12142
WARNING: Cancelling may not restore the original Gate Assignments correctly.

Error ID
ERR_CBS_RESTGATEASGNMAYFAIL

Error name
CBSRESTGATEASGNMAYFAIL

Cause
Original values for the Gate Assignments are collected and buffered when the SCM Transition Configuration
Form is displayed or when a Condition deletion operation is attempted, in case we later need to 'Cancel' the
form or abort the deletion operation. For an unknown reason, the reading of one or more Gate Assignment
values had failed. Canceling the form or aborting the deletion operation may have not restored the original Gate
Assignments correctly.

Solution
None.

1303
3 ERROR CODES

3.53.44 12143
Cancelling failed to restore the original Gate Assignments.

Error ID
ERR_CBS_RESTORIGGATEASGNFLD

Error name
CBSRESTORIGGATEASGNFLD

Cause
Original values for the Gate Assignments are collected and buffered when the SCM Transition Configuration
Form is displayed or when a Condition deletion operation is attempted, in case we later need to 'Cancel' the
form or abort the deletion operation. For an unknown reason, the restoring/writing of one or more of the
buffered Gate Assignment values failed. Canceling the form or aborting the deletion operation failed to restore
the original Gate Assignments.

Solution
None.

3.53.45 12144
WARNING: Cancelling may not restore the original Gate Types correctly.

Error ID
ERR_CBS_RESTGATETYPEMAYFAIL

Error name
CBSRESTGATETYPEMAYFAIL

Cause
Original values for the Gate Types are collected and buffered for the SCM Transition block when a Condition
deletion operation is attempted, in case we later need to abort the deletion operation. For an unknown reason,
the reading of one or more Gate Type values had failed. Aborting the deletion operation may have not restored
the original Gate Types correctly.

Solution
None.

3.53.46 12145
Cancelling failed to restore the original Gate Types.

Error ID
ERR_CBS_RESTORIGGATETYPEFLD

Error name
CBSRESTORIGGATETYPEFLD

1304 www.honeywell.com
 3 ERROR CODES

Cause
Original values for the Gate Types are collected and buffered for the SCM Transition block when a Condition
deletion operation is attempted, in case we later need to abort the deletion operation. For an unknown reason the
restoring/writing of one or more of the buffered Gate Type values failed. Aborting the deletion operation failed
to restore the original Gate Types.

Solution
None.

3.53.47 12146
<name> Could not get Template's name

Error ID
ERR_CBD_FLDGETTEMPLATENAME

Error name
CBDFLDGETTEMPLATENAME

Cause
The final displayed error message embeds the error message returned by IControl::GetBaseName(), reporting
the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.48 12147
<name> Could not get Template's CtrlID

Error ID
ERR_CBD_FLDGETTEMPLATECTRLID

Error name
CBDFLDGETTEMPLATECTRLID

Cause
The final displayed error message embeds the error message returned by
ICtrlSession::GetIDFromTemplateName(), reporting the cause of the API fail and, in some cases, the Template
Name that caused the fail.

Solution
Fix condition reported for the API fail and try again.

3.53.49 12148
<name> Could not open Template

1305
3 ERROR CODES

Error ID
ERR_CBD_FLDOPENTEMPLATE

Error name
CBDFLDOPENTEMPLATE

Cause
The final displayed error message embeds the error message returned by ICtrlSession::OpenTemplate(),
reporting the cause of the API fail and, in some cases, the Template Name that caused the fail.

Solution
Fix condition reported for the API fail and try again.

3.53.50 12149
<name> Could not get IParam pointer to read parameter's default value.

Error ID
ERR_CBD_FLDGETIPARAMPOINTER

Error name
CBDFLDGETIPARAMPOINTER

Cause
The final displayed error message embeds the error message returned by IControl::LookupParam(), reporting
the cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

3.53.51 12150
<name> Could not get parameter's default value.

Error ID
ERR_CBD_FLDGETPARDEFAULTVALUE

Error name
CBDFLDGETPARDEFAULTVALUE

Cause
The final displayed error message embeds the error message returned by IParam:: GetValue(), reporting the
cause of the API fail.

Solution
Fix condition reported for the API fail and try again.

1306 www.honeywell.com
 3 ERROR CODES

3.53.52 12151
CB is already running.

Error ID
ERR_CB_MULTIPLECBNOTALLOWED

Error name
CBONLY1CBALLOWED

Cause
User attempted to start a second instance of Control Builder.

Solution
Verify that no other Control Builders are running, then restart Control Builder.

3.53.53 12152
Online Help startup (name) failed; error number = <number>.

Error ID
ERR_FBS_HTMLHELPAPP

Error name
FBSHTMLHELPAPP

Cause
Error number = 2: The HTML Help application file could not be found.
Error number = 8: The HTML Help application specified is not an executable program.
Error number = 12: Not enough memory available in which to run the Help application.

Solution
None.

3.53.54 12153
Cannot tell which Parameter needs help.

Error ID
ERR_FBS_NOHPARAMFOCUS

Error name
FBSNOHPARAMFOCUS

Cause
The program cannot detect which field on the Parameter Configuration Form has the Windows 'Focus'. This is
most likely caused by a program bug.

1307
3 ERROR CODES

Solution
None.

3.53.55 12154
Cannot tell which Tab needs help.

Error ID
ERR_FBS_NOHPAGEFOCUS

Error name
FBSNOPAGEFOCUS

Cause
The program cannot detect which tab of the Parameter Configuration Form has the Windows 'Focus'. This is
most likely caused by a program bug.

Solution
None.

3.53.56 12155
Cannot find the Help file location for <name> in Registry.

Error ID
ERR_FBS_NOCCLPATH

Error name
FBSNOCCLPATH

Cause
Either the Custom Control Library (CCL) was not properly installed, or the Registry may have become
corrupted.

Solution
None.

3.53.57 12156
Failed to set tab stops.

Error ID
ERR_TCBS_FAILEDTOSETTABSTOPS

Error name
TCBSFAILEDTOSETTABSTOPS

1308 www.honeywell.com
 3 ERROR CODES

Cause
Failed to set the tab-stop positions in the list box of SCM Recipe or History tabs.

Solution
None.

3.53.58 12157
Delete selected row?

Error ID
ERR_TCBS_DELETEROW

Error name
TCBSDELETEROW

Cause
Not an error. User confirmation to delete the selected row.

Solution
None.

3.53.59 12158
Delete all selected rows?

Error ID
ERR_TCBS_DETETEROWS

Error name
TCBSDETETEROWS

Cause
Not an error. User confirmation to delete all the selected rows.

Solution
None.

3.53.60 12159
Cannot delete new row.

Error ID
ERR_TCBS_CANNOTDELETENEWROW

Error name
TCBSCANNOTDELETENEWROW

1309
3 ERROR CODES

Cause
User selected the new (blank) row and hit <Delete> key.

Solution
None.

3.53.61 12160
Invalid target range.

Error ID
ERR_TCBS_INVALIDTARGETRANGE

Error name
TCBSINVALIDTARGETRANGE

Cause
User typed an invalid target range. A valid range is between 0 and 100.

Solution
Type a valid range between 0 and 100.

3.53.62 12161
Failed to add a new parameter. Too many parameters are configured.

Error ID
ERR_TCBS_ADDTOOMANYPARAMS

Error name
TCBSADDTOOMANYPARAMS

Cause
User tried to add too many parameters.

Solution
None.

3.53.63 12162
Failed to add a new parameter. Target value is missing.

Error ID
ERR_TCBS_ADDNOTARGETVALUE

Error name
TCBSADDNOTARGETVALUE

1310 www.honeywell.com
 3 ERROR CODES

Cause
User tried to add a new parameter with no target value.

Solution
None.

3.53.64 12163
Failed to add a new parameter. Invalid target value.

Error ID
ERR_TCBS_ADDINVALIDTARGETVALUE

Error name
TCBSADDINVALIDTARGETVALUE

Cause
User tried to add a new parameter with an invalid target value.

Solution
None.

3.53.65 12164
Failed to add a new parameter. Target Hi value is missing.

Error ID
ERR_TCBS_ADDNOTARGETMAX

Error name
TCBSADDNOTARGETMAX

Cause
User tried to add a new parameter with no target hi.

Solution
None.

3.53.66 12165
Failed to add a new parameter. Invalid target Hi value.

Error ID
ERR_TCBS_ADDINVALIDTARGETMAX

Error name
TCBSADDINVALIDTARGETMAX

1311
3 ERROR CODES

Cause
User tried to add a new parameter with an invalid target hi.

Solution
None.

3.53.67 12166
WARNING: Target value is greater than Target Hi.

Error ID
ERR_TCBS_TARGETGREATERTARGETMAX

Error name
TCBSTARGETGREATERTARGETMAX

Cause
Not an error. A warning to the user that the target value is greater than target hi.

Solution
None.

3.53.68 12167
Failed to add a new parameter. Target Lo value is missing.

Error ID
ERR_TCBS_ADDNOTARGETMIN

Error name
TCBSDDNOTARGETMIN

Cause
User tries to add a new parameter with no target lo.

Solution
None.

3.53.69 12168
Failed to add a new parameter. Invalid target Lo value.

Error ID
ERR_TCBS_ADDINVALIDTARGETMIN

Error name
TCBSADDINVALIDTARGETMIN

1312 www.honeywell.com
 3 ERROR CODES

Cause
User tries to add a new parameter with an invalid target lo.

Solution
None.

3.53.70 12169
Warning: Target Lo is greater than Target Hi.

Error ID
ERR_TCBS_TARGETMINGREATERTARGETMAX

Error name
TCBSTARGETMINGREATERTARGETMAX

Cause
Not an error. Warns the user that target lo is greater than target hi.

Solution
None.

3.53.71 12170
Warning: Target value is less than Target Lo.

Error ID
ERR_TCBS_TARGETLESSTARGETMIN

Error name
TCBSTARGETLESSTARGETMIN

Cause
Not an error. Warns the user that target lo is greater than target value.

Solution
None.

3.53.72 12171
Failed to add a new parameter. Material code is missing.

Error ID
ERR_TCBS_ADDNOMATCODE

Error name
TCBSADDNOMATCODE

1313
3 ERROR CODES

Cause
User tried to add a new parameter with no material code.

Solution
None.

3.53.73 12172
Failed to add a new parameter. Invalid Material code.

Error ID
ERR_TCBS_ADDINVALIDMATCODE

Error name
TCBSADDINVALIDMATCODE

Cause
User tried to add a new parameter with no scale allowed option.

Solution
None.

3.53.74 12173
Failed to add a new parameter. Invalid scale allowed option.

Error ID
ERR_TCBS_ADDNORESCALE

Error name
TCBSADDNORESCALE

Cause
User tries to add a new parameter with no scale allowed option.

Solution
None.

3.53.75 12174
Failed to add a new parameter. Invalid scale allowed option.

Error ID
ERR_TCBS_ADDINVALIDRESCALE

Error name
TCBSADDINVALIDRESCALE

1314 www.honeywell.com
 3 ERROR CODES

Cause
User tried to add a new parameter with an invalid scale allowed option.

Solution
None.

3.53.76 12175
Failed to modify this recipe parameter attribute. Target value is missing.

Error ID
ERR_TCBS_MODIFYNOTARGETVALUE

Error name
TCBSMODIFYNOTARGETVALUE

Cause
User tries to modify a recipe parameter attribute with no target value.

Solution
None.

3.53.77 12176
Failed to modify this recipe parameter attribute. Invalid target value.

Error ID
ERR_TCBS_MODIFYINVALIDTARGETVALUE

Error name
TCBSMODIFYINVALIDTARGETVALUE

Cause
User tried to modify a recipe parameter attribute with an invalid target value.

Solution
None.

3.53.78 12177
Warning: Multiple parameters with different Target Hi are selected, no validation will be performed with Target
Hi.
Continue?

Error ID
ERR_TCBS_MODIFYWITHMULTITARGETMAX

1315
3 ERROR CODES

Error name
TCBSMODIFYWITHMULTITARGETMAX

Cause
Not an error. Warning that no validation will be performed with target hi.

Solution
None.

3.53.79 12178
Warning: Multiple parameters with different Target Lo are selected, no validation will be performed with Target
Lo.
Continue?

Error ID
ERR_TCBS_MODIFYWITHMULTITARGETMIN

Error name
TCBSMODIFYWITHMULTITARGETMIN

Cause
Not an error. Warning that no validation will be performed with target lo.

Solution
None.

3.53.80 12179
Failed to modify this recipe parameter attribute.Target Hi value is missing.

Error ID
ERR_TCBS_MODIFYNOTARGETMAX

Error name
TCBSMODIFYNOTARGETMAX

Cause
User tried to modify a recipe parameter attribute with no target hi.

Solution
None.

3.53.81 12180
Failed to modify this recipe parameter attribute.
<Invalid Target Hi value>

1316 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_TCBS_MODIFYINVALIDTARGETMAX

Error name
TCBSMODIFYINVALIDTARGETMAX

Cause
User tried to modify a recipe parameter attribute with an invalid target hi.

Solution
None.

3.53.82 12181
Warning: Multiple parameters with different Target values are selected, no validation will be performed with
Target value.
Continue?

Error ID
ERR_TCBS_MODIFYWITHMULTITARGETVALUE

Error name
TCBSMODIFYWITHMULTITARGETVALUE

Cause
Not an error. Warning that no validation will be performed with target value.

Solution
None.

3.53.83 12182
Failed to modify this recipe parameter attribute. Target Lo value is missing.

Error ID
ERR_TCBS_MODIFYNOTARGETMIN

Error name
TCBSMODIFYNOTARGETMIN

Cause
User tried to modify a recipe parameter attribute with no target lo.

Solution
None.

1317
3 ERROR CODES

3.53.84 12183
Failed to modify this recipe parameter attribute.
<Invalid Target Lo value>

Error ID
ERR_TCBS_MODIFYINVALIDTARGETMIN

Error name
TCBSMODIFYINVALIDTARGETMIN

Cause
User tried to modify a recipe parameter attribute with an invalid target lo.

Solution
None.

3.53.85 12184
Failed to modify this recipe parameter attribute. Material code is missing.

Error ID
ERR_TCBS_MODIFYNOMATCODE

Error name
TCBSMODIFYNOMATCODE

Cause
User tried to modify a recipe parameter attribute with no material code.

Solution
None.

3.53.86 12185
Failed to modify this recipe parameter attribute. Invalid Material code.

Error ID
ERR_TCBS_MODIFYINVALIDMATCODE

Error name
TCBSMODIFYINVALIDMATCODE

Cause
User tried to modify a recipe parameter attribute with an invalid material code.

1318 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.53.87 12186
Failed to modify this recipe parameter attribute. Scale allowed option is missing.

Error ID
ERR_TCBS_MODIFYNOSCALE

Error name
TCBSMODIFYNOSCALE

Cause
User tried to modify a recipe parameter attribute with no scale allowed option.

Solution
None.

3.53.88 12187
Failed to modify this recipe parameter attribute. Invalid Scale allowed option.

Error ID
ERR_TCBS_MODIFYINVALIDSCALE

Error name
TCBSMODIFYINVALIDSCALE

Cause
User tried to modify a recipe parameter attribute with an invalid scale allowed option.

Solution
None.

3.53.89 12188
Do you want to save the new parameter?

Error ID
ERR_TCBS_CONFIRMSAVE

Error name
TCBSCONFIRMSAVE

Cause
Not an error. User confirmation to save to new parameter.

1319
3 ERROR CODES

Solution
None.

3.53.90 12189
Error: Unable to make new RATIOBIAS block.

Error ID
ERR_TCBD_RATIOBIASFAIL

Error name
TCBDRATIOBIASFAIL

Cause
Failure in BOOL CFbratioCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession ) method.
Could not create CRation Object.

Solution
None.

3.53.91 12190
Error: Null Control Library Pointer, cannot make Configuration Form.

Error ID
ERR_TCBD_NULLCLPTR

Error name
TCBDNULLCLPTR

Cause
A bad Control Library pointer was returned.

Solution
None.

3.53.92 12191
Error: Unable to make new AUTOMAN block.

Error ID
ERR_TCBD_AUTOMANFAIL

Error name
TCBDAUTOMANFAIL

1320 www.honeywell.com
 3 ERROR CODES

Cause
Failure in BOOL CfbautomCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession )
method. Could not create Cfanout Object.

Solution
None.

3.53.93 12192
Error: Unable to make new FANOUT block.

Error ID
ERR_TCBD_FANOUTFAIL

Error name
TCBDFANOUTFAIL

Cause
Failure in BOOL CFbfanoutCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession )
method. Could not create Cautom Object.

Solution
None.

3.53.94 12193
Error: Unable to make new OVRDSEL block.

Error ID
ERR_TCBD_OVRSELFAIL

Error name
TCBDOVRSELFAIL

Cause
Failure in BOOL CFbovrselCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession )
method. Could not create Cfanout Object.

Solution
None.

3.53.95 12194
Error: Unable to make new PID block.

Error ID
ERR_TCBD_PIDFAIL

1321
3 ERROR CODES

Error name
TCBDPIDFAIL

Cause
Failure in BOOL CFbpidCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession ) method.
Could not create Cpid Object.

Solution
None.

3.53.96 12195
Error: Unable to make new REMCAS block.

Error ID
ERR_TCBD_REMCCASFAIL

Error name
TCBDREMCCASFAIL

Cause
Failure in BOOL CFbremcasCtrl::OnAddFunctionBlock( IControl * pICtrl, ICtrlSession * pICtrlSession )
method.

Solution
None.

3.53.97 12196
Error: Unable to make new SWITCH block.

Error ID
ERR_TCBD_SWITCHFAIL

Error name
TCBDSWITCHFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Cswitch Object.

Solution
None.

3.53.98 12197
Error: Unable to make new GLIN block.

1322 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_TCBD_GLINFAIL

Error name
TCBDGLINFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Cglin Object.

Solution
None.

3.53.99 12198
Error: Unable to make new TOTAL block.

Error ID
ERR_TCBD_TOTALFAIL

Error name
TCBDTOTALFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Ctotal Object.

Solution
None.

3.53.100 12199
Error: Unable to make new AUXCALC block.

Error ID
ERR_TCBD_AUXCALCFAIL

Error name
TCBDAUXCALCFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Cauxcalc Object.

Solution
None.

1323
3 ERROR CODES

3.54 Codes 12200 to 12299

Related topics
“12200” on page 1326
“12201” on page 1326
“12202” on page 1326
“12203” on page 1327
“12204” on page 1327
“12205” on page 1327
“12206” on page 1328
“12207” on page 1328
“12208” on page 1328
“12209” on page 1329
“12210” on page 1329
“12211” on page 1329
“12212” on page 1330
“12213” on page 1330
“12214” on page 1331
“12215” on page 1331
“12216” on page 1331
“12217” on page 1332
“12218” on page 1332
“12219” on page 1332
“12220” on page 1333
“12221” on page 1333
“12222” on page 1333
“12223” on page 1334
“12224” on page 1334
“12225” on page 1334
“12226” on page 1335
“12227” on page 1335
“12228” on page 1335
“12229” on page 1336
“12230” on page 1336
“12231” on page 1336
“12232” on page 1337
“12233” on page 1337
“12234” on page 1337
“12235” on page 1338
“12236” on page 1338
“12237” on page 1338
“12238” on page 1339
“12239” on page 1339
“12240” on page 1339
“12241” on page 1340
“12242” on page 1340
“12243” on page 1340

1324 www.honeywell.com
 3 ERROR CODES

“12244” on page 1341

“12245” on page 1341
“12246” on page 1341
“12247” on page 1342
“12248” on page 1342
“12249” on page 1342
“12250” on page 1343
“12251” on page 1343
“12252” on page 1343
“12253” on page 1344
“12254” on page 1344
“12255” on page 1344
“12256” on page 1345
“12257” on page 1345
“12258” on page 1345
“12259” on page 1346
“12260” on page 1346
“12261” on page 1346
“12262” on page 1347
“12263” on page 1347
“12264” on page 1347
“12265” on page 1348
“12266” on page 1348
“12267” on page 1348
“12268” on page 1349
“12269” on page 1349
“12270” on page 1350
“12271” on page 1350
“12272” on page 1350
“12273” on page 1351
“12274” on page 1351
“12275” on page 1351
“12276” on page 1352
“12277” on page 1352
“12278” on page 1352
“12279” on page 1353
“12280” on page 1353
“12281” on page 1353
“12282” on page 1354
“12283” on page 1354
“12284” on page 1355
“12285” on page 1355
“12286” on page 1355
“12287” on page 1356
“12288” on page 1356
“12289” on page 1356
“12290” on page 1357
“12291” on page 1357

1325
3 ERROR CODES

“12292” on page 1357

“12293” on page 1358
“12294” on page 1358
“12295” on page 1358
“12296” on page 1359
“12297” on page 1359
“12298” on page 1359
“12299” on page 1360

3.54.1 12200
Error: Unable to make new REGCALC block.

Error ID
ERR_TCBD_REGCALCFAIL

Error name
TCBDREGCALCFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Cregcalc Object.

Solution
None.

3.54.2 12201
Error: Unable to make new FLAG block.

Error ID
ERR_TCBD_FLAGFAIL

Error name
TCBDFLAGFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create Cflag Object.

Solution
None.

3.54.3 12202
Error: Could not Delete Connection to Source.

Error ID
ERR_TCBD_COULDNOTDELCONN

1326 www.honeywell.com
 3 ERROR CODES

Error name
TCBD_COULDNOTDELCONN

Cause
Calculator form was trying to delete its connection to the source and was unsuccessful.

Solution
None.

3.54.4 12203
Invalid value, keep change?

Error ID
ERR_TCBD_INVVALUEKEEPCHG

Error name
TCBDINVVALUEKEEPCHG

Cause
Not an error. User Confirmation to keep change.

Solution
None.

3.54.5 12204
Function not allowed when connected to Secondary Engineering Repository Database.

Error ID
ERR_CB_FCNNOTALLOWDFORDBB

Error name
FCNNOTALLOWDFORDBB

Cause
Primary ERDB failed, running on secondary ERDB.

Solution
None.

3.54.6 12205
<name> may not be changed when the Secondary ERDB is active.

Error ID
ERR_FBS_WRITENOTALLOWDFORDBB

1327
3 ERROR CODES

Error name
FBSWRITENOTALLODFORDBB

Cause
The Primary Engineering Repository Database (ERDB) is down, but the Secondary is active. Only limited
functionality is supported, and no database changes are allowed.

Solution
Fix the node that contains the ERDB.

3.54.7 12206
None.

Error ID
ERR_FBS_BLOCKCONFIGNOTALLOWDFORDBB

Error name
None.

Cause
None.

Solution
None.

3.54.8 12207
None.

Error ID
ERR_FBS_FORMCONFIGNOTALLOWDFORDBB

Error name
None.

Cause
None.

Solution
None.

3.54.9 12208
Unable to check mastership of connected ERDB.

Error ID
ERR_ASN_CANTCHECKDBMASTER

1328 www.honeywell.com
 3 ERROR CODES

Error name
ASNCANTCHECKDBMASTER

Cause
Fundamental error prevents CL (ICtrlSession::IsConnectedToMaster) from determining which database
itconnected to.

Solution
None.

3.54.10 12209
Cannot <name> the selected blocks with the Secondary ERDB is active.

Error ID
ERR_ASN_CANTDOITWITHSECDB

Error name
ASNCANTDOITWITHSECDB

Cause
The Primary ERDB is down, and Secondary is active. Only limited functionality is supported, no database
changes are allowed.

Solution
Fix node that contains the Primary ERDB.

3.54.11 12210
NT Error <name> attempting to load library.

Error ID
ERR_TWIZ_REGLOOP_LOAD_CL

Error name
TWIZ_REGLOOP_LOAD_CL

Cause
Could not load the Experion PKS Control Library (lib.ocx).

Solution
Verify that Experion PKS is installed correctly.

3.54.12 12211
Could not get logon procedure entry-point.

1329
3 ERROR CODES

Error ID
ERR_TWIZ_REGLOOP_ADDRESS_LOGON

Error name
TWIZ_REGLOOP_ADDRESS_LOGON

Cause
Could not locate the logon procedure in the Experion PKS Control Library. Lib.ocx has become damaged or the
operating system has become unreliable.

Solution
Replace lib.ocx, shut down the workstation and reboot.

3.54.13 12212
Could not log in to Experion PKS

Error ID
ERR_TWIZ_REGLOOP_LOGIN

Error name
TWIZ_REGLOOP_LOGIN

Cause
The ODBC datasource to the Engineering Repository Database (ERDB) is not correctly configured, or the user
has insufficient access rights to the ERDB.

Solution
Verify that Experion PKS has been installed correctly and adjust access rights as required.

3.54.14 12213
Error <name> attempting to locate source template.

Error ID
ERR_TWIZ_REGLOOP_TEMPLATE

Error name
TWIZ_REGLOOP_TEMPLATE

Cause
The example for creating the PID loop cannot be located. It doesn't exist or it's name is not correctly configured
in the registry.

Solution
Verify that Experion PKS has been installed correctly.

1330 www.honeywell.com
 3 ERROR CODES

3.54.15 12214
Error <name> beginning transaction.

Error ID
ERR_TWIZ_REGLOOP_BEGIN_TRANS

Error name
TWIZ_REGLOOP_BEGIN_TRANS

Cause
Malfunction in the Experion PKS Control Library (CL).

Solution
Shut down Control Builder and restart it. If this doesn't resolve the problem, shut down and reboot the
workstation.

3.54.16 12215
Error <name> attempting to create PID loop.

Error ID
ERR_TWIZ_REGLOOP_CREATE

Error name
TWIZ_REGLOOP_CREATE

Cause
The Engineering Repository Database (ERDB) has been damaged, all possible control-IDs have been used up,
or the ERDB belongs to a previous version of Experion PKS.

Solution
Convert the ERDB as appropriate.

3.54.17 12216
Error <name> attempting to write PID loop to ERDB.

Error ID
ERR_TWIZ_REGLOOP_COMMIT_TRANS

Error name
TWIZ_REGLOOP_COMMIT_TRANS

Cause
There is insufficient space to expand the Engineering Repository Database (ERDB).

1331
3 ERROR CODES

Solution
Compact the ERDB, shut down the engineering workstation and reboot.

3.54.18 12217
Error <name> attempting to open PID loop.

Error ID
ERR_TWIZ_REGLOOP_OPEN

Error name
TWIZ_REGLOOP_OPEN

Cause
Insufficient system resources are available or creating the PID loop failed.

Solution
Shut down and reboot the system.

3.54.19 12218
Could not instantiate PID loop.

Error ID
ERR_TWIZ_REGLOOP_INSTANTIATE

Error name
TWIZ_REGLOOP_INSTANTIATE

Cause
Insufficient virtual memory is available.

Solution
Shut down unnecessary applications and try again.

3.54.20 12219
Error <name> attempting to lock PID loop.

Error ID
ERR_TWIZ_REGLOOP_LOCK

Error name
TWIZ_REGLOOP_LOCK

Cause
Problem writing to the Engineering Repository Locking Table.

1332 www.honeywell.com
 3 ERROR CODES

Solution
Repair the Engineering Repository Database (ERDB)

3.54.21 12220
Error <name> attempting to enumerate views.

Error ID
ERR_TWIZ_REGLOOP_VIEWS

Error name
TWIZ_REGLOOP_VIEWS

Cause
Problem accessing the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.22 12221
Error <name> attempting to enumerate function blocks in PID loop.

Error ID
ERR_TWIZ_REGLOOP_GET_FBS

Error name
TWIZ_REGLOOP_GET_FBS

Cause
Problem accessing the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.23 12222
Could not instantiate AI block.

Error ID
ERR_TWIZ_REGLOOP_INSTANTIATE_AI

Error name
TWIZ_REGLOOP_INSTANTIATE_AI

Cause
Insufficient virtual memory is available.

1333
3 ERROR CODES

Solution
Shut down unnecessary applications and try again.

3.54.24 12223
Unexpected duplicate AI channel block.

Error ID
ERR_TWIZ_REGLOOP_DUPLICATE_AI

Error name
TWIZ_REGLOOP_DUPLICATE_AI

Cause
Inconsistency in the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.25 12224
Could not instantiate AO channel block.

Error ID
ERR_TWIZ_REGLOOP_INSTANTIATE_AO

Error name
TWIZ_REGLOOP_INSTANTIATE_AO

Cause
Insufficient virtual memory is available.

Solution
Shut down unnecessary applications and try again.

3.54.26 12225
Unexpected duplicate AO channel block.

Error ID
ERR_TWIZ_REGLOOP_DUPLICATE_AO

Error name
TWIZ_REGLOOP_DUPLICATE_AO

Cause
Inconsistency in the Engineering Repository Database (ERDB).

1334 www.honeywell.com
 3 ERROR CODES

Solution
Repair the ERDB.

3.54.27 12226
Could not instantiate DAQ block.

Error ID
ERR_TWIZ_REGLOOP_INSTANTIATE_DAQ

Error name
TWIZ_REGLOOP_INSTANTIATE_DAQ

Cause
Insufficient virtual memory is available.

Solution
Shut down unnecessary applications and try again.

3.54.28 12227
Unexpected duplicate DAQ block.

Error ID
ERR_TWIZ_REGLOOP_DUPLICATE_DAQ

Error name
TWIZ_REGLOOP_DUPLICATE_DAQ

Cause
Inconsistency in the Engineering Repository Database(ERDB).

Solution
Repair the ERDB.

3.54.29 12228
Could not instantiate PID block.

Error ID
ERR_TWIZ_REGLOOP_INSTANTIATE_PID

Error name
TWIZ_REGLOOP_INSTANTIATE PID

Cause
Insufficient virtual memory is available.

1335
3 ERROR CODES

Solution
Shut down unnecessary applications and try again.

3.54.30 12229
Unexpected duplicate PID block.

Error ID
ERR_TWIZ_REGLOOP_DUPLICATE_PID

Error name
TWIZ_REGLOOP_DUPLICATE_PID

Cause
Inconsistency in the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.31 12230
Unexpected block type, <name>, in PID loop.

Error ID
ERR_TWIZ_REGLOOP_UNEXPECTED

Error name
TWIZ_REGLOOP_UNEXPECTED

Cause
Inconsistency in the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.32 12231
A function block is missing from the PID loop.

Error ID
ERR_TWIZ_REGLOOP_MISSING

Error name
TWIZ_REGLOOP_MISSING

Cause
Inconsistency in the Engineering Repository Database (ERDB).

1336 www.honeywell.com
 3 ERROR CODES

Solution
Repair the ERDB.

3.54.33 12232
Bad gain.

Error ID
ERR_TWIZ_REGLOOP_GAIN

Error name
TWIZ_REGLOOP_GAIN

Cause
User entered an unacceptable value.

Solution
Enter an acceptable value instead.

3.54.34 12233
Bad time constraint.

Error ID
ERR_TWIZ_REGLOOP_TIME_CONST

Error name
TWIZ_REGLOOP_TIME_CONST

Cause
User entered an unacceptable value.

Solution
Enter an acceptable value instead.

3.54.35 12234
Bad dead-time.

Error ID
ERR_TWIZ_REGLOOP_DEAD_TIME

Error name
TWIZ_REGLOOP_DEAD_TIME

Cause
User entered an unacceptable value.

1337
3 ERROR CODES

Solution
Enter an acceptable value instead.

3.54.36 12235
CAUTION: Process Dead Time Exceeds Time Constant. Beware of Unstable Control.

Error ID
ERR_TWIZ_REGLOOP_BIG_DEAD_TIME

Error name
TWIZ_REGLOOP_BIG_DEAD_TIME

Cause
Warning: Unstable control might result from the time constant / dead time.

Solution
Reconsider the values of the time constant / dead time and enter better values if appropriate

3.54.37 12236
Cannot allocate <name> page.

Error ID
ERR_TWIZ_REGLOOP_CANT_ALLOCATE_PAGE

Error name
TWIZ_REGLOOP_CANT_ALLOCATE_PAGE

Cause
Insufficient virtual memory is available.

Solution
Shut down unnecessary application and try again.

3.54.38 12237
Error: Unable to make new DACQ block

Error ID
ERR_TCBD_DACQFAIL

Error name
TCBDDACQFAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create CFlag Object.

1338 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.54.39 12238
Error: Unable to make new DEVCTL block

Error ID
ERR_TCBD_DEVCTLFAIL

Error name
TCBDDEV1FAIL

Cause
Failure in BOOL CFbswitchCtrl::OnAddFunctionBlock( IControl * pICtrl, pICtrlSession * pICtrlSession )
method. Could not create CFlag Object.

Solution
None.

3.54.40 12239
<name> cannot be saved because the Secondary DB is active. Select OK to close without saving, or Cancel to
keep the chart open.

Error ID
ERR_FB_NOSAVEFORDB

Error name
FBNOSAVEFORDB

Cause
The Primary ERDB is down, and the Secondary is active. There is limited functionality supported, and no
database changes are allowed.

Solution
Fix node that contains the primary ERDB.

3.54.41 12240
Configuration cannot be saved because the Secondary DB is active. Select OK to Exit form without saving, or
Cancel to keep the form open.

Error ID
ERR_FB_NOCOMMITFORMFORDB

Error name
FBNOCOMMITFORMFORDB

1339
3 ERROR CODES

Cause
The Primary ERDB is down, and the Secondary is active. There is limited functionality supported, and no
database changes are allowed.

Solution
Fix node that contains the primary ERDB.

3.54.42 12241
Crystal Reporting print engine error.

Error ID
ERR_CBDCRPE

Error name
CRPE API

Cause
Failure to Open/Print Default Crystal Report.

Solution
Ensure Default Report supplied as part of installation.

3.54.43 12242
Crystal Report not found in Reports Directory.

Error ID
ERR_CBDCRNOTFOUND

Error name
REPORT FILE

Cause
No * .RPT files found in system/reports directory, or memory error.

Solution
Ensure system/reports directory and file supplied as part of installation.

3.54.44 12243
No CM/SCM items selected for Crystal Report.

Error ID
ERR_CBDNOITEMSCHECKED

Error name
REPORT ITEM

1340 www.honeywell.com
 3 ERROR CODES

Cause
No CMs/SCMs in ERDB or memory error.

Solution
Create CM and/or SCM and retry.

3.54.45 12244
Entry not found for Crystal Reporting Registry.

Error ID
ERR_CBDCRWREG

Error name
CRYSTAL.REG

Cause
Error in installation of CRYSTAL.REG file as part of installation.

Solution
Re-execute file CRYSTAL.REG in system/bin directory.

3.54.46 12245
Default Crystal Report SQL statement not found.

Error ID
ERR_CBDCRWSQLSTMT

Error name
REPORT FILE

Cause
Default SQL STMT not found for default report supplied as part of installation.

Solution
Ensure default report supplied as part of installation.

3.54.47 12246
Invalid (or Incomplete) Parameter Connector Configuration. Correct before closing chart.

Error ID
ERR_FB_BADPARAMCONCLOSE

Error name
FBBADPARAMCONCLOSE

1341
3 ERROR CODES

Cause
The chart was closed when the parameter connector edit box was active. (no entry, invalid name, or invalid
connection)

Solution
The parameter connector configuration has been restored, user may now close, or correctly complete the
parameter connector configuration.

3.54.48 12247
Failed to get locale information.

Error ID
ERR_LRS_FLD_GET_LOCALE_INFO

Error name
None.

Cause
Failed to get information for location of resource dll.

Solution
None.

3.54.49 12248
Failed to load ('<name>') language of <name>.

Error ID
ERR_LRS_FLD_LOAD_LOCAL_LANG_DLL_FMT

Error name
None.

Cause
The resource dll is not in local language directory.

Solution
None.

3.54.50 12249
Default language is used.

Error ID
ERR_LRS_DEFAULT_LANG_USED

1342 www.honeywell.com
 3 ERROR CODES

Error name
None.

Cause
The resource dll is not found and the dll in default language directory would be loaded.

Solution
None.

3.54.51 12250
Failed to load default language.

Error ID
ERR_LRS_FLD_LOAD_DEFAULT_LANG

Error name
None.

Cause
The resource dll is not in default language directory.

Solution
None.

3.54.52 12251
Using embedded resources.

Error ID
ERR_LRS_EMBED_RES_USED

Error name
None.

Cause
The resource dll is not found and the embedded resources would be used.

Solution
None.

3.54.53 12252
Cannot continue.

Error ID
ERR_LRS_CANNOT_CONTINUE

1343
3 ERROR CODES

Error name
None.

Cause
Cannot load resource dll anywhere and there is not an embedded dll.

Solution
None.

3.54.54 12253
No matching ordinal for pushed state for parameter.

Error ID
ERR_FBS_NOBUTTONORDMATCH

Error name
None.

Cause
Programmer error. An non-existent value has been mapped to the state of a button control.

Solution
None. Button will work as intended.

3.54.55 12254
<name> cannot be used for button. Parameter should be Boolean or Enumeration.

Error ID
ERR_FBS_WRONGTYPEFORBUTTON

Error name
None.

Cause
Programmer error. A parameter with an unsupported data type has been mapped to a button control.

Solution
None. Button will not work as intended.

3.54.56 12255
Could not create a frame for SCM chart. Open and close a CM chart, then re-open SCM chart.

Error ID
ERR_CB_FAILEDCREATENAME

1344 www.honeywell.com
 3 ERROR CODES

Error name
None.

Cause
Cannot create a 'window frame' for the chart. The problem has been observed only when opening an SCM's
chart, and unfortunately the exact cause is undetermined at this time.

Solution
Open and then close a Control Module's chart. Opening the SCM chart should now be successful.

3.54.57 12256
Cannot uncreate new strategy

Error ID
ERR_TWIZ_REGLOOP_CANT_UNCREATE

Error name
TWIZ_REGLOOP_CANT_UNCREATE

Cause
Problem accessing the Engineering Repository Database (ERDB).

Solution
Repair the ERDB.

3.54.58 12257
Bad K.

Error ID
ERR_TWIZ_REGLOOP_BAD_K

Error name
TWIZ_REGLOOP_BAD_K

Cause
User entered an unacceptable value.

Solution
Enter an acceptable value instead.

3.54.59 12258
Bad T2.

Error ID
ERR_TWIZ_REGLOOP_BAD_T2

1345
3 ERROR CODES

Error name
TWIZ_REGLOOP_BAD_T2

Cause
User entered an unacceptable value.

Solution
Enter an acceptable value instead.

3.54.60 12259
Bad T1.

Error ID
ERR_TWIZ_REGLOOP_BAD_T1

Error name
TWIZ_REGLOOP_BAD_T1

Cause
User entered an unacceptable value.

Solution
Enter an acceptable value instead.

3.54.61 12260
Your system is running low on resources needed to perform drawing operations. Close any charts that you do
not need to have open. You may have to exit Control Builder to clear this condition.

Error ID
ERR_FBS_LOW_RESOURCES

Error name
FBS_LOW_RESOURCES

Cause
There are insufficient resources needed to perform drawing operations.

Solution
Close any charts that you do not need to have open and/or exit Control Builder.

3.54.62 12261
Failed to set Main Handler Selection.

Error ID
ERR_CBS_FLDSETMAINHNDLRSELECTION

1346 www.honeywell.com
 3 ERROR CODES

Error name
FLDSETMAINHNDLRSELECTION

Cause
Control Builder was unable to set the initial handler in a newly-created SCM as the 'main' handler in the
database.

Solution
Attempt to set the main handler from the SCM Configuration form.

3.54.63 12262
Failed to get IControl for the SCM.

Error ID
ERR_CBS_FLDTOGETICTRLFORSCM

Error name
FLDTOGETICTRLFORSCM

Cause
Invalid IControl pointer is returned for SCM.

Solution
None.

3.54.64 12263
Monitoring setup error.

Error ID
ERR_FB_SETUPMONITOR

Error name
CBDSETUPMONITOR

Cause
Possible memory error.

Solution
Some errors will self correct. If it persists, lose any unneeded charts; then close and re-open the chart of interest.

3.54.65 12264
Paint Expression error.

Error ID
ERR_FB_SCMPAINTEXPRESSION

1347
3 ERROR CODES

Error name
SCMPAINTEXPRESSION

Cause
Possible Experion PKS software timing or synchronization error.

Solution
Some errors will self-correct. If one persists, close and re-open the SCM chart of interest.

3.54.66 12265
Could not remove handler connection to <name>.

Error ID
ERR_CBS_CANTREMOVECONNBFORDELETE

Error name
CANTREMOVECONNBFORDELETE

Cause
The Control Library (CL) DelConnection call failed for some reason. Should really never happen unless
database is corrupt or in some way out of sync.

Solution
None.

3.54.67 12266
Operation has halted. Could not assign <name>.

Error ID
ERR_ASN_CANTASSIGN_IOM

Error name
CANTASSIGNIOM

Cause
Some low-level problem (out of memory, timeouts, and so on) has caused the Control Library (CL) operations
associated with assigning IOMs to fail.

Solution
None. The database should not be corrupted. The user can check the error log for possibly further information.

3.54.68 12267
Operation halted. could not un-assign <name>.

1348 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CB_CANTUNASSIGN_IOM

Error name
CANTUNASSIGNIOM

Cause
Some low-level problem (out of memory, timeouts, and so on) has caused the Control Library (CL) operations
associated with un-assigning IOMs to fail.

Solution
None. The database should not be corrupted. The user can check the error log for possible further information.

3.54.69 12268
WARNING: It is possible that another Control Builder session is also connected to the ER database.
Performance degradations can occur when running multiple Control Builder sessions.

Error ID
ERR_CB_WARNMULTIPLECB

Error name
WARNMULTIPLECB

Cause
Another application (either another CB instance, or the import export tool) is using the database, or the user is
trying to start up CB after it has crashed.

Solution
This is only a warning, but performance can be improved by closing the other Control Builder before attempting
to start a new instance of CB. If no other CB is running, it could be the Import/Export tool.
Failing that, DbAdmin can be used to clear the database locks, thereby silencing this warning.

3.54.70 12269
Request to toggle auto-synchronization failed. Wee error log for more details.

Error ID
ERR_CB_ERAUTOSYNCFAILED

Error name
ERAUTOSYNCFAILED

Cause
ERSync client DLL was not able to send the request to toggle auto-synchronization. This may also occur if user
attempts to sync a non-replicated dtabase.

Solution
Consult the error log, and fix whatever problems are indicated.

1349
3 ERROR CODES

3.54.71 12270
Request for a one-shot synchronization failed. See error log for more details.

Error ID
ERR_CB_ERONESHOTSYNCFAILED

Error name
ERONESHOTSYNCFAILED

Cause
ERSync client DLL was not able to send the request for a one-shot synchronizaiton. This may also occur if user
attempts to 'one-shot-sync' a non-replicated database.

Solution
Consult the error log, and fix whatever problems are indicted.

3.54.72 12271
WARNING: May be leaking Handles. When convenient, close and reopen Control Builder.

Error ID
ERR_WARNHANDLELEAK

Error name
WARNHANDLELEAK

Cause
WARNING: A process was started (for example, the user invoked PDF Collection Search), and the handle to it
could not be closed.
This is wasting/leaking a system resource. Eventually you could run out of resources and the system would not
work.

Solution
When convenient, close and reopen Control Builder.

3.54.73 12272
Your system is running low on resources in Control Builder. In order to retain any changes, save any open charts
and close Control Builder. Close other applications as needed. Restart Control Builder.

Error ID
ERR_FBS_LOW_RESOURCES_1

Error name
FBS_LOW_RESOURCES

1350 www.honeywell.com
 3 ERROR CODES

Cause
System is running low on resources in Control Builder.

Solution
In order to retain any changes, save any open charts and close Control Builder. Close other applications as
needed. Restart Control Builder.

3.54.74 12273
Failed to allocate memory for tree.

Error ID
ERR_CBDFAILEDALLOCTREE

Error name
FAILEDALLOCTREE

Cause
Probably running low on resources.

Solution
Shut down other applications to free system resources before restarting Control Builder.

3.54.75 12274
Cannot register clipboard format, error code (hex).

Error ID
ERR_CB_REGCLIPBOARDFMT

Error name
CB_REGCLIPBOARDFMT

Cause
Unexpected error, possibly out of resources. Error code may be found in WINNT.H.

Solution
Try again.

3.54.76 12275
Invalid Clipboard Format.

Error ID
ERR_CB_INVALIDCLIPBOARDFMT

Error name
CB_INVALIDCLIPBOARDFMT

1351
3 ERROR CODES

Cause
Software development error.

Solution
None

3.54.77 12276
Cannot empty clipboard.

Error ID
ERR_CB_EMPTYCLIPBOARD

Error name
CB_EMPTYCLIPBOARD

Cause
Probably out of resources.

Solution
None - When the next application obtains access to the clipboard and empties it, the Control builder data will be
removed too.

3.54.78 12277
Cannot access the clipboard.

Error ID
ERR_CB_ATTACHCLIPBOARD

Error name
CB_ATTACHCLIPBOARD

Cause
Most likely another application has control of the clipboard.

Solution
Check other active applications that could be in the middle of a Copy/Paste type operation. If so, complete the
other operation and try Control Builder again.

3.54.79 12278
Cannot obtain clipboard data.

Error ID
ERR_CB_READCLIPBOARD

1352 www.honeywell.com
 3 ERROR CODES

Error name
CB_READCLIPBOARD

Cause
The clipboard has data in the correct format, but you are unable to read it. It's possible that you are running out
of resources.

Solution
Close an open non-critical applications, and try again.

3.54.80 12279
Cannot understand clipboard data.

Error ID
ERR_CB_XLATECLIPBOARD

Error name
CB_XLATECLIPBOARD

Cause
The clipboard has data in the correct format, but you are unable to convert it into numeric data. Either the data
was corrupted while on the clipboard (unlikely), or it was not processed correctly by Control Builder when it
was added to the clipboard.

Solution
Try again.

3.54.81 12280
Cannot send data to clipboard.

Error ID
ERR_CB_WRITECLIPBOARD

Error name
CB_WRITECLIPBOARD

Cause
The clipboard will not accept data you are trying to put on it - unexpected program error.

Solution
Check other active applications that could be in the middle of a Copy/Paste type operation. If so, complete the
other operation and try Control Builder again.

3.54.82 12281
Cannot drag or copy block(s) - no control session.

1353
3 ERROR CODES

Error ID
ERR_CB_NOSESSIONFORCOPY

Error name
CB_NOSESSIONFORCOPY

Cause
To copy an object, the Control Builder must exchange information with the database. The chart did not have a
session in which to exchange this information.

Solution
Close chart(s); exit and restart Control Builder.

3.54.83 12282
Cannot drag or copy non-block(s) or block(s) that might have been deleted.

Error ID
ERR_CB_BADCONTROLFORCOPY

Error name
CB_BADCONTROLFORCOPY

Cause
To copy an object, the source selected for copying must be a valid block. Either the source block's Control ID or
its Type is not valid. One possibility is that in the interval between the 'Copy' and the subsequent 'Paste' the
block was deleted.

Solution
Try again.

3.54.84 12283
Cannot copy or move non-block(s).

Error ID
ERR_CB_NONBLOCKCOPYMOVE

Error name
CB_NONBLOCKCOPYMOVE

Cause
None.

Solution
None.

1354 www.honeywell.com
 3 ERROR CODES

3.54.85 12284
Low memory condition: cannot Drag/Drop or Copy/Paste.

Error ID
ERR_CB_NODRAGDROPMEMORY

Error name
CB_NODRAGDROPMEMORY

Cause
Could not obtain memory necessary for Drag/Drop or Copy/paste operation.

Solution
Close unneeded chart(s) or Exit a non-critical application. Try again.

3.54.86 12285
The Function Block copy was not made correctly (invalid pointer).

Error ID
ERR_CB_BADCONTROLCOPY

Error name
CB_BADCONTROLCOPY

Cause
Unexpected program error.

Solution
Try again.

3.54.87 12286
Unable to drop text object.

Error ID
ERR_CB_CANNOTDROPTEXTOBJ

Error name
CB_CANNOTDROPTEXTOBJ

Cause
Unexpected program error.

Solution
Try again.

1355
3 ERROR CODES

3.54.88 12287
Unable to remove HandlerRef connection between modules

Error ID
ERR_CB_CANNOTDELHDLRREF

Error name
CB_CANNOTDELHDLRREF

Cause
Unexpected program error; there should always be a HandlerRef connection.

Solution
Try again.

3.54.89 12288
Unable to make HandlerRef connection between modules.

Error ID
ERR_CB_CANNOTMAKEHDLRREF

Error name
CB_CANNOTMAKEHDLRREF

Cause
Unexpected program error; it should always be possible to make a HandlerRef connection.

Solution
Try again.

3.54.90 12289
A parameter was specified along with a block name.

Error ID
ERR_CB_NOPARAMETERNEEDED

Error name
CB_NOPARAMETERNEEDED

Cause
This operation requires a block name to be specified, however a parameter name was entered along with the
block name. The entry will be truncated to show only the block name.

1356 www.honeywell.com
 3 ERROR CODES

Solution
Accept truncated entry or re-enter new block name without parameter specified.

3.54.91 12290
Function block for this entry does not match the specified function block.

Error ID
ERR_CB_TEMPLATESDONTMATCH

Error name
CB_TEMPLATESDONTMATCH

Cause
When resolving indeterminate or substitute connections, the function block must be the same for the 'before'
connection as for the 'after' connection.

Solution
Enter a block name or substitute name that is of the correct function block type.

3.54.92 12291
Unable to delete: Substitute Name currently in use in a connection.

Error ID
ERR_CB_SUBSTNAMENODELETE

Error name
CB_SUBSTNAMENODELETE

Cause
You tried to delete a substitute name entry that is currently in use in a connection.

Solution
Remove all uses of the substitute name from connections then try to delete entry again.

3.54.93 12292
This operation cannot be performed because it would exceed the maximum number of rows allowed in the grid.

Error ID
ERR_FBS_GRID_MAX_ROWS_EXCEEDED

Error name
FBS_GRID_MAX_ROWS_EXCEEDED

Cause
This grid allows only so many rows to be in it.

1357
3 ERROR CODES

Solution
None.

3.54.94 12293
Failed to allocate memory for Data Driven List Pages.

Error ID
ERR_FBS_CANNOTALLOCLISTPAGES

Error name
FBS_CANNOTALLOCLISTPAGES

Cause
Running out of memory.

Solution
Call TAC to report the problem, shut down the system and restart.

3.54.95 12294
Failed to allocate memory for a Data Driven Page.

Error ID
ERR_FBS_CANNOTALLOCDDFORMPAGE

Error name
FBS_CANNOTALLOCDDFORMPAGE

Cause
Running out of memory.

Solution
Call TAC to report the problem, shut down the system and restart

3.54.96 12295
Communication path information is not valid. IOM Slot number may not be zero unless the IO is in a remote
chassis.

Error ID
ERR_FBS_IOMINVSLOT

Error name
FBS_IOMINVSLOT

Cause
Zero slot number.

1358 www.honeywell.com
 3 ERROR CODES

Solution
Enter valid slot number.

3.54.97 12296
Communication path information is not valid. For Remote IO, the IOM Chassis MAC address and the
Downlink CNB Slot Number may not be zero.

Error ID
ERR_FBS_IOMINVREMOTECOMMPATH

Error name
FBS_IOMINVREMOTECOMMPATH

Cause
Need to have entry for both fields described.

Solution
Enter valid values.

3.54.98 12297
Group definition does not match the groups assigned to parameters! All parameters have not been added to the
form. Correct the .def file.

Error ID
ERR_FBS_GROUPPARAMMISMATCH

Error name
FBS_GROUPPARAMMISMATCH

Cause
This should only be seen during development.

Solution
Block developer should correct the def file.

3.54.99 12298
Failed to allocate configure pin page.

Error ID
ERR_FBS_ALLOCCONNTRDLG

Error name
FBS_ALLOCCONNTRDLG

1359
3 ERROR CODES

Cause
Failure to allocate memory.

Solution
Close other applications and try again.

3.54.100 12299
Failed to allocated configure symbol parameter page.

Error ID
ERR_FBS_ALLOCCNFGPARAM

Error name
FBS_ALLOCCNFGPARAM

Cause
Failure to allocate memory.

Solution
Close other applications and try again.

1360 www.honeywell.com
 3 ERROR CODES

3.55 Codes 12300 to 12399

Related topics
“12300” on page 1363
“12301” on page 1363
“12302” on page 1363
“12303” on page 1364
“12304” on page 1364
“12305” on page 1364
“12306” on page 1365
“12307” on page 1365
“12308” on page 1365
“12309” on page 1366
“12310” on page 1366
“12311” on page 1366
“12312” on page 1367
“12313” on page 1367
“12314” on page 1367
“12315” on page 1368
“12316” on page 1368
“12317” on page 1368
“12318” on page 1369
“12319” on page 1369
“12320” on page 1369
“12321” on page 1370
“12322” on page 1370
“12323” on page 1370
“12324” on page 1371
“12325” on page 1371
“12326” on page 1371
“12327” on page 1372
“12328” on page 1372
“12329” on page 1372
“12330” on page 1373
“12331” on page 1373
“12332” on page 1374
“12333” on page 1374
“12334” on page 1374
“12335” on page 1375
“12336” on page 1375
“12337” on page 1375
“12338” on page 1376
“12339” on page 1376
“12340” on page 1376
“12341” on page 1377
“12342” on page 1377
“12343” on page 1377

1361
3 ERROR CODES

“12344” on page 1378

“12345” on page 1378
“12346” on page 1378
“12347” on page 1379
“12348” on page 1379
“12349” on page 1379
“12350” on page 1380
“12351” on page 1380
“12352” on page 1380
“12353” on page 1381
“12354” on page 1381
“12355” on page 1381
“12356” on page 1382
“12357” on page 1382
“12358” on page 1382
“12359” on page 1383
“12360” on page 1383
“12361” on page 1383
“12362” on page 1384
“12363” on page 1384
“12364” on page 1384
“12365” on page 1385
“12366” on page 1385
“12367” on page 1385
“12368” on page 1386
“12369” on page 1386
“12370” on page 1386
“12371” on page 1387
“12372” on page 1387
“12373” on page 1388
“12374” on page 1388
“12375” on page 1388
“12376” on page 1389
“12377” on page 1389
“12378” on page 1389
“12379” on page 1390
“12380” on page 1390
“12381” on page 1390
“12382” on page 1391
“12383” on page 1391
“12384” on page 1391
“12385” on page 1392
“12386” on page 1392
“12387” on page 1392
“12388” on page 1393
“12389” on page 1393
“12390” on page 1393
“12391” on page 1394

1362 www.honeywell.com
 3 ERROR CODES

“12392” on page 1394

“12393” on page 1394
“12394” on page 1395
“12395” on page 1395
“12396” on page 1395
“12397” on page 1396
“12398” on page 1396
“12399” on page 1396

3.55.1 12300
Failed to allocated configure monitor symbol parameter page.

Error ID
ERR_FBS_ALLOCMONPARAM

Error name
FBS_ALLOCMONPARAM

Cause
Failure to allocate memory.

Solution
Close other applications and try again.

3.55.2 12301
Failed to allocate configure parameter of interest page.

Error ID
ERR_FBS_ALLOCPARAMOFINT

Error name
Failure to allocate memory.

Cause
Failure to allocate memory.

Solution
Close other applications and try again.

3.55.3 12302
Group number out of order! All parameters have not been added to the form. Make sure all parameters are
sequential within a page.

Error ID
ERR_FBS_GRPOUTOFORDER

1363
3 ERROR CODES

Error name
FBS_GRPOUTOFORDER

Cause
This should only be seen during development.

Solution
Block developer should correct the def file

3.55.4 12303
Your system is running low on resources.

Error ID
ERR_FBS_LOW_RESOURCES_1

Error name
FBS_LOW_RESOURCES

Cause
Close other applications as needed.

Solution
When convenient, close and reopen Control builder.

3.55.5 12304
Unable to make new DEADTIME block.

Error ID
ERR_TCBD_DEADTIMEFAIL

Error name
TCBDDEADTIMEFAIL

Cause
Failure in BOOL CFbglinCtrl::OnAddFunctionBlock method. Could not create CDEADTIME Object.

Solution
None.

3.55.6 12305
Unable to make new LEADLAG block

Error ID
ERR_TCBD_LEADLAGFAIL

1364 www.honeywell.com
 3 ERROR CODES

Error name
TCBDLEADLAGFAIL

Cause
Failure in BOOL CFbglinCtrl::OnAddFunctionBlock method. Could not create CLEADLAG Object.

Solution
None.

3.55.7 12306
Cannot read slot or remote addresses from edit box.

Error ID
ERR_FBS_IOMCANTREADVALUE

Error name
FBS_IOMCANTREADVALUE

Cause
Programming error.

Solution
None.

3.55.8 12307
Error writing ASA Path to CL.

Error ID
ERR_FBS_IOMCLREJECTEDCOMMPATH

Error name
FBS_IOMCLREJECTEDCOMMPATH

Cause
Programming error.

Solution
None.

3.55.9 12308
Cannot get Hondata element for ASAPATH parameter.

Error ID
ERR_FBS_IOMBADHONDATA

1365
3 ERROR CODES

Error name
FBS_IOMBADHONDATA

Cause
The .def file doesn't include ASAPATH.

Solution
Block developer should add ASAPATH parameter to .def file.

3.55.10 12309
Unable to write to the registry.

Error ID
ERR_CB_WRITEREGISTRYCUIENTRY

Error name
WRITEREGISTRYCUIENTRY

Cause
None.

Solution
None.

3.55.11 12310
Reading prefName, prefType from Database.

Error ID
ERR_CB_GETGUIPREF

Error name
GETGUIPREF

Cause
None.

Solution
None.

3.55.12 12311
Writing prefName, prefType to Database.

Error ID
ERR_CB_SETGUIPREF

1366 www.honeywell.com
 3 ERROR CODES

Error name
SETGUIPREF

Cause
None.

Solution
None.

3.55.13 12312
Failed to allocate Block Preference page.

Error ID
ERR_FBS_ALLOCPREFDLG

Error name
FBS_ALLOCPREFDLG

Cause
Failure to allocate memory.

Solution
Close other applications and try again.

3.55.14 12313
This paste operation cannot be performed because the shape of the copy area doesn't match the shape of the
paste area.

Error ID
ERR_FBS_GRID_BAD_PASTE_SHAPE

Error name
FBS_GRID_BAD_PASTE_SHAPE

Cause
User error.

Solution
Select a paste area whose shape matches the shape of the copy area.

3.55.15 12314
This paste operation cannot be performed because pasting the data will exceed the dimensions of the grid.

Error ID
ERR_FBS_GRID_BAD_PASTE_FIT

1367
3 ERROR CODES

Error name
FBS_GRID_BAD_PASTE_FIT

Cause
User error.

Solution
Enlarge the dimensions of the grid, if possible.

3.55.16 12315
A CL error has occurred during address validation:.

Error ID
ERR_CBFM_HWBLK_ADRS_VALIDATE

Error name
CBFM_HWBLK_ADRS_VALIDATE

Cause
Control Builder could not obtain necessary information from the database because of low memory resources or
internal CL errors.

Solution
Shut down unnecessary applications and restart Control Builder. If problems persist, call TAC and report the
problem.

3.55.17 12316
An address conflict has been found.

Error ID
ERR_CBFM_HWBLK_DUP_ADRS_FOUND

Error name
CBFM_HWBLK_DUP_ADRS_FOUND

Cause
While validating the address of a potential hardware block, an existing block was discovered with the same
address.

Solution
Change the address of the new block and try to create it again.

3.55.18 12317
Low memory condition: All blocks may not be copied\nClose any open charts or other applications to increase
memory, and retry

1368 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBT_LOWMEMORYFORCOPY

Error name
CBTLOWMEMORYFORCOPY

Cause
Could not get enough memory to create copy list.

Solution
Close other charts and applications.

3.55.19 12318
Could not copy.

Error ID
ERR_CBT_CANTCOPYBLOCK

Error name
CBTCANTCOPYBLOCK

Cause
The Control Library error which caused this problem will be included in the error string.

Solution
Refer to the CL error description for more information.

3.55.20 12319
Could not open copy source.

Error ID
ERR_CBT_CANTOPENCOPYSOURCE

Error name
CBTCANTOPENCOPYSOURCE

Cause
Error occurred when attempting to open the source block during a copy. The Control Library error which caused
this will be included in the error string.

Solution
Refer to the CL error for more information.

3.55.21 12320
Crystal Reporting Application Object Error.

1369
3 ERROR CODES

Error ID
ERR_TCBS_CRPEAPPFAIL

Error name
CRPE API FAIL

Cause
Failure to create Crystal Report Application object.

Solution
None.

3.55.22 12321
Crystal Reporting CDO Error.

Error ID
ERR_TCBS_CDOFAIL

Error name
CDO FAIL

Cause
Failure to create Crystal Report CDO object.

Solution
None.

3.55.23 12322
Crystal Reporting Database Object Error.

Error ID
ERR_TCBS_DBFAIL

Error name
DB FAIL

Cause
Failure to create Crystal Report DataBase object.

Solution
None.

3.55.24 12323
Crystal Reporting Database Tables Collection error.

1370 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_TCBS_TBLCOLLFAIL

Error name
TBL COLL FAIL

Cause
Failure to get Crystal Report DataBase Tables Collection.

Solution
None.

3.55.25 12324
Crystal Reporting Database Table Object error.

Error ID
ERR_TCBS_TBLSFAIL

Error name
TBL FAIL

Cause
Failure to get Crystal Report Table object.

Solution
None.

3.55.26 12325
Crystal Reporting Print error.

Error ID
ERR_TCBS_PRINTFAIL

Error name
PRINT FAIL

Cause
Failure to print Crystal Report.

Solution
None.

3.55.27 12326
Crystal Reporting Preview error:

1371
3 ERROR CODES

Error ID
ERR_TCBS_PREVIEWFAIL

Error name
PREVIEW FAIL

Cause
Failure to preview Crystal Report.

Solution
None.

3.55.28 12327
Crystal Reporting Export error:

Error ID
ERR_TCBS_EXPORTFAIL

Error name
EXPORT FAIL

Cause
Failure to export Crystal Report.

Solution
None.

3.55.29 12328
Crystal Reporting CDO Reset error:

Error ID
ERR_TCBS_RESETCDOFAIL

Error name
RESET CDO FAIL

Cause
Failure to reset Crystal Report CDO.

Solution
None.

3.55.30 12329
Crystal Reporting CDO Load error.

1372 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_TCBS_LOADCDOFAIL

Error name
LOAD CDO FAIL

Cause
Failure to load Crystal Report CDO.

Solution
None.

3.55.31 12330
Configuration cannot be saved.

Error ID
ERR_FB_NOCOMMITFORMFORDB1

Error name
FBNOCOMMITFORMFORDB1

Cause
Some condition which makes it impossible or dangerous to save configuration form changes to the database
(usually either the primary ERDB is down or an ER synchronization is in progess). Functionality is limited
during such a condition; no database changes allowed.

Solution
If a synchronization is in progress, wait for it to complete. If the primary ER is down, fix the node that contains
it.

3.55.32 12331
Chart cannot be saved.

Error ID
ERR_FB_NOSAVEFORDB1

Error name
FBNOSAVEFORDB1

Cause
Some condition which makes it impossible or dangerous to save configuration form changes to the database
(usually either the primary ERDB is down or ER synchronization is in progress). Functionality is limited during
such a condition; no database changes allowed.

Solution
If a synchronization is in progress, wait for it to complete. If the primary ER is down, fix the node that contains
it.

1373
3 ERROR CODES

3.55.33 12332
The function is not allowed.

Error ID
ERR_CB_FCNNOTALLOWDFORDBB1

Error name
FCNNOTALLOWDFORDBB1

Cause
Some condition which makes it impossible or dangerous to perform a function that modifies the database
(usually either the primary ERDB is down or an ER synchronization is in progess). Functionality is limited
during such a condition; no database changes allowed.

Solution
If a synchronization is in progress, wait for it to complete. If the primary ER is down, fix the node that contains
it.

3.55.34 12333
The function is not allowed at the current time.

Error ID
ERR_CB_FUNCTIONNOTALLOWED

Error name
FUNCTIONNOTALLOWED

Cause
Some condition which makes it impossible or dangerous to perform a function which modifies the database.
Functionality is limited during such a condition; no database changes allowed.

Solution
None. If this error is received, Control Builder was unable to determine the reason for disallowing the function.

3.55.35 12334
A synchronization is in progress.

Error ID
ERR_CB_SYNCREASON

Error name
SYNCREASON

1374 www.honeywell.com
 3 ERROR CODES

Cause
This string is only seen within another error; it should never be seen independently. Refer to the error which
encapsulates this string for more details.

Solution
None.

3.55.36 12335
Control Builder is currently connected to the Secondary database.

Error ID
ERR_CB_SECONDARYDBREASON

Error name
FUNCTIONNOTALLOWED

Cause
This string is only seen within another error; it should never be seen independently. Refer to the error which
encapsulates this string for more details.

Solution
None.

3.55.37 12336
No parameter specified.

Error ID
ERR_FBS_NOPARAMENTERED

Error name
FBS_NOPARAMENTERED

Cause
Error occurred when entering a parameter connector string. No parameter was specified.

Solution
Enter a valid parameter for this function block to complete the parameter connector entry.

3.55.38 12337
Maximum number of vertices exceeded.

Error ID
ERR_CB_MAXVERTICIESEXCEEDED

1375
3 ERROR CODES

Error name
CBMAXVERTICIESEXCEEDED

Cause
There are too many vertices (turning points) in the routing of this wire.

Solution
Try routing wire again using less turns to reach the destination.

3.55.39 12338
Maximum profile number is 10.

Error ID
ERR_FBS_MAXPROFILEEXCEEDED

Error name
FBSMAXPROFILEEXCEEDED

Cause
Error occurs when user wants to configure more than 10 profiles.

Solution
None.

3.55.40 12339
Select the profile first.

Error ID
ERR_FBS_NOSELECTEDFILE

Error name
FBS_NOSELECTEDFILE

Cause
Error occurs when user wants to delete, copy and display the profile but forgets to select the profile.

Solution
None.

3.55.41 12340
Another user is editing this configuration form.

Error ID
ERR_CB_OPENFORMREADONLY

1376 www.honeywell.com
 3 ERROR CODES

Error name
CB_OPENFORMREADONLY

Cause
Error occurred because some other user is currently editing this form.

Solution
Click the OK button to open the form read-only. Click the Cancel button to cancel the open operation.

3.55.42 12341
Change is not allowed.

Error ID
ERR_FBS_SCANWRITEBADFORREADONLY

Error name
FBS_SCANWRITEBADFORREADONLY

Cause
Error occurred because some other user is currently editing this form.

Solution
Change the server parameter from a form that is not opened as read-only. For CM/SCM in Control Builder,
close form, select chart, click Controller >Allow Database Changes, and re-open form. For others, change the
parameter from the project side.

3.55.43 12342
This pin is used as part of a connection to another block.

Error ID
ERR_FBS_PINCONNECTED

Error name
FBS_PINCONNECTED

Cause
Trying to remove a pin that is connected.

Solution
Delete the connection first. Then Pin can be removed.

3.55.44 12343
The Control Builder could not create the Exporting Data dialog.

1377
3 ERROR CODES

Error ID
ERR_CBE_CANTCREATEXPTGDATADLG

Error name
CBE_CANTCREATEXPTGDATADLG

Cause
Error returned from CDialog.Create. Dialog-box creation or initialization was unsuccessful.

Solution
Call TAC to report the problem.

3.55.45 12344
The Control Builder could not allocate memory for the Exporting Data dialog.

Error ID
ERR_CBE_CANTALLOCMEMFOREXPTGDATADLG

Error name
CBE_CANTALLOCMEMFOREXPTGDATADLG

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.46 12345
The Exporting Data dialog could not allocate memory for the status text.

Error ID
ERR_CBE_CANTALLOCMEMFOREXPTGSTS

Error name
CBE_CANTALLOCMEMFOREXPTGSTS

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.47 12346
The Export dialog could not allocate memory for the Point Pick Control.

1378 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBE_CANTALLOCEXPTPICKCTRL

Error name
CBE_CANTALLOCEXPTPICKCTRL

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.48 12347
The Export dialog could not create the point pick control.

Error ID
ERR_CBE_CANTCREATEEXPTPTPICKCTRL

Error name
CBE_CANTCREATEEXPTPTPICKCTRL

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.49 12348
The Export dialog could not allocate a pick item for the list control.

Error ID
ERR_CBE_CANTALLOCPICKITEM

Error name
FMSDefOther

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.50 12349
The Exporting Data dialog could not create the point pick control.

1379
3 ERROR CODES

Error ID
ERR_CBE_CANTCREATEEXPTGPICKCTRL

Error name
CBE_CANTCREATEEXPTGPICKCTRL

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.51 12350
The Exporting Data dialog could not spawn worker thread.

Error ID
ERR_CBE_WKRTHRDNOTSPAWNED

Error name
CBE_WKRTHRDNOTSPAWNED

Cause
Exporting data worker thread did not spawn successfully.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.52 12351
The object referenced in the IXP Tool Status Report did not match any IXP GUI pick list entry.

Error ID
ERR_CBE_NOPICKLISTMATCH

Error name
CBE_NOPICKLISTMATCH

Cause
Should not occur.

Solution
None.

3.55.53 12352
The IXP Tool Export Selection List could not be created.

1380 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBE_SELLISTNOTCREATED

Error name
CBE_SELLISTNOTCREATED

Cause
Destination directory was deleted; insufficient file space; or another application has destination file opened.

Solution
None

3.55.54 12353
Export set item status failed.

Error ID
ERR_CBE_SETITEMSTSFAILED

Error name
CBE_SETITEMSTSFAILED

Cause
Should not occur.

Solution
None.

3.55.55 12354
Export completed, with errors.

Error ID
ERR_CBE_COMPLETEWITHERRORS

Error name
CBE_COMPLETEWITHERRORS

Cause
See errors reported from IXP Tool.

Solution
See workarounds for errors reported from IXP Tool.

3.55.56 12355
The Control Builder could not create the Importing Data Dialog.

1381
3 ERROR CODES

Error ID
ERR_CBI_CANTCREATIMPTGDATADLG

Error name
CBI_CANTCREATIMPTGDATADLG

Cause
Error returned from CDialog.Create. Dialog-box creation or initialization was unsuccessful.

Solution
Call TAC to report the problem.

3.55.57 12356
The Control Builder could not allocate memory for the Importing Data dialog.

Error ID
ERR_CBI_CANTALLOCMEMFORIMPTGDATADLG

Error name
CBI_CANTALLOCMEMFORIMPTGDATADLG

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.58 12357
The Importing Data dialog could not allocate memory for the status text.

Error ID
ERR_CBI_CANTALLOCMEMFORIMPTGSTS

Error name
CBI_CANTALLOCMEMFORIMPTGSTS

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.59 12358
The Importing Data dialog could not allocate memory for the phase text.

1382 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBI_CANTALLOCMEMFORIMPTGPHASE

Error name
CBI_CANTALLOCMEMFORIMPTGPHASE

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.60 12359
Memory could not be allocated for the Import dialog pick list.

Error ID
ERR_CBI_CANTALLOCIMPDLGPICKLIST

Error name
CBI_CANTALLOCIMPDLGPICKLIST

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.61 12360
Memory could not be allocated for the Importing Data dialog pick list.

Error ID
ERR_CBI_CANTCREATEIMPTPICKLIST

Error name
CBI_CANTCREATEIMPTPICKLIST

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.62 12361
The Import dialog could not acquire list of objects from IXP Tool.

1383
3 ERROR CODES

Error ID
ERR_CBI_CANTGETOBJLISTFROMIXPTOOL

Error name
CBI_CANTGETOBJLISTFROMIXPTOOL

Cause
Source file or directory is not present.

Solution
Check the Import dialog settings; verify source directory / file(s) are present.

3.55.63 12362
The Import dialog could not allocate a pick item for the list control.

Error ID
ERR_CBI_CANTALLOCPICKITEM

Error name
CBI_CANTALLOCPICKITEM

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.64 12363
The Import dialog could not allocate memory to populate the list control.

Error ID
ERR_CBI_CANTALLOCMEMTOPOPULATE

Error name
CBI_CANTALLOCMEMTOPOPULATE

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.65 12364
The Importing Data dialog could not create the point pick control.

1384 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBI_CANTCREATEIMPTGPICKCTRL

Error name
CBI_CANTCREATEIMPTGPICKCTRL

Cause
Sufficient memory is not available.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.66 12365
The Importing Data dialog could not spawn worker thread.

Error ID
ERR_CBI_WKRTHRDNOTSPAWNED

Error name
CBI_WKRTHRDNOTSPAWNED

Cause
Exporting data worker thread did not spawn successfully.

Solution
Close any unused application(s) to free up memory and try again. If failure persists, call TAC.

3.55.67 12366
The object referenced in the IXP Tool Status Report did not match any IXP GUI pick list entry.

Error ID
ERR_CBI_NOPICKLISTMATCH

Error name
CBI_NOPICKLISTMATCH

Cause
Should not occur.

Solution
None.

3.55.68 12367
The IXP Tool Import Selection List could not be created.

1385
3 ERROR CODES

Error ID
ERR_CBI_SELLISTNOTCREATED

Error name
CBI_SELLISTNOTCREATED

Cause
Destination directory was deleted; insufficient file space, or another application has the destination file opened.

Solution
None

3.55.69 12368
Import Set Item Status Failed.

Error ID
ERR_CBI_SETITEMSTSFAILED

Error name
CBI_SETITEMSTSFAILED

Cause
Should not occur.

Solution
None.

3.55.70 12369
Import Set Item Type Failed.

Error ID
ERR_CBI_SETITEMPHASEFAILED

Error name
CBI_SETITEMPHASEFAILED

Cause
Should not occur.

Solution
None.

3.55.71 12370
Import Set Item Type Failed.

1386 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CBI_SETITEMTYPEFAILED

Error name
CBI_SETITEMTYPEFAILED

Cause
Should not occur.

Solution
None.

3.55.72 12371
Import completed, with errors.

Error ID
ERR_CBI_COMPLETEWITHERRORS

Error name
CBI_COMPLETEWITHERRORS

Cause
See errors reported from IXP Tool.

Solution
See Workarounds for errors reported from IXP Tool.

3.55.73 12372
This configuration cannot be made at this time.

Error ID
ERR_FBS_CANNOTSETVALUE

Error name
FBS_CANNOTSETVALUE

Cause
Trying to reduce the number of inputs or outputs, but one of the pins is connected; trying to change from a
standard to a pulsed output, but the output pin is connected to another block; or trying to change from a pulsed
output to a standard, but the output pin is connected to another block.

Solution
You must delete the connection to a pin before you can delete a pin. The configuration will be restored to its
original state.

1387
3 ERROR CODES

3.55.74 12373
Cannot change the selected blocks while ERDB synchronization is in progress

Error ID
ERR_ASN_CANTDOITWHILESYNCING

Error name
ASNCANTDOITWHILESYNCINC

Cause
The ER synchronization is in progress, limited functionality supported, no database changes allowed

Solution
Wait for synchronization to complete, then try the action again

3.55.75 12374
Cannot check the status of ER synchronization.

Error ID
ERR_ASN_CANTCHECKSYNC

Error name
ASNCANTCHECKSYNC

Cause
The assignment dialog is unable to communicate with the main Control Builder application. It is most likely a
programming error.

Solution
Try closing and reopening Control Builder.

3.55.76 12375
Fieldbus Message Specification (FMS) Object Dictionary (OD) extension length overflow.

Error ID
FIM_E_FMS_OD_EXTENSION_LEN_OVERFLOW

Error name
FMSOdExtensionLenOverflow

Cause
None.

1388 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.55.77 12376
This operation cannot be performed because it would exceed the maximum number of columns allowed in the
grid.

Error ID
ERR_FBS_GRID_MAX_COLUMNS_EXCEEDED

Error name
FBS_GRID_MAX_COLUMNS_EXCEEDED

Cause
This grid allows only so many columns to be in it.

Solution
None.

3.55.78 12377
You are about to delete your existing alias configuration! Are you sure you want to delete it?

Error ID
ERR_FBS_DISABLEALIASOPT

Error name
FBS_DISABLEALIASOPT

Cause
This message is a confirmation asking if you are sure you want to delete all existing alias configuration on the
container.

Solution
None.

3.55.79 12378
This change cannot be made because the alias parameter is currently being used in an expression.

Error ID
ERR_FBS_ALIASCONNECTED

Error name
FBS_ALIASCONNECTED

1389
3 ERROR CODES

Cause
None.

Solution
None.

3.55.80 12379
Changing the model block will cause all instance parameters in this row to be deleted! Are you sure you want to
make this change?

Error ID
ERR_FBS_MODELBLOCKCHANGE

Error name
FBS_MODELBLOCKCHANGE

Cause
None.

Solution
None.

3.55.81 12380
Changing the model parameter to a different type will cause all instance parameters in this row to be deleted!
Are you sure you want to make this change?.

Error ID
ERR_FBS_MODELPARAMCHANGE

Error name
FBS_MODELPARAMCHANGE

Cause
None.

Solution
None.

3.55.82 12381
Alias is being used in an expression.

Error ID
ERR_FBS_ALIASUSED

1390 www.honeywell.com
 3 ERROR CODES

Error name
FBS_ALIASUSED

Cause
None.

Solution
None.

3.55.83 12382
This operation cannot be performed because there must be at least one alias row remaining in the grid.

Error ID
ERR_FBS_MINALIASES

Error name
FBS_MINALIASES

Cause
None.

Solution
None.

3.55.84 12383
This operation cannot be performed because there must be at least one instance column remaining in the grid.

Error ID
ERR_FBS_MININSTANCES

Error name
FBS_MININSTANCES

Cause
None.

Solution
None

3.55.85 12384
The current value for parameter NUMALIASES is bad. The grid will contain one alias row.

Error ID
ERR_FBS_BADNUMALIASES

1391
3 ERROR CODES

Error name
FBS_BADNUMALIASES

Cause
None.

Solution
None

3.55.86 12385
The current value for parameter NUMINSTANCES is bad. The grid will contain one instance column.

Error ID
ERR_FBS_BADNUMINSTANCES

Error name
FBS_BADNUMINSTANCES

Cause
None.

Solution
None.

3.55.87 12386
The existing alias configuration cannot be deleted.

Error ID
ERR_FBS_NODISABLEALIASOPT

Error name
FBS_NODISABLEALIASOPT

Cause
At least one alias is being used in an expression.

Solution
Delete all references to the aliases first and then try the delete operation again.

3.55.88 12387
The value entered for parameter NUMALIASES is bad and will be reset.

Error ID
ERR_FBS_RESETNUMALIASES

1392 www.honeywell.com
 3 ERROR CODES

Error name
FBS_RESETNUMALIASES

Cause
None.

Solution
None.

3.55.89 12388
The value entered for parameter NUMINSTANCES is bad and will be reset.

Error ID
ERR_FBS_RESETNUMINSTANCES

Error name
FBS_RESETNUMINSTANCES

Cause
None.

Solution
None.

3.55.90 12389
The bitmap path length must not exceed 255 characters.

Error ID
ERR_CBP_BITMAPPATHLEN

Error name
CBP_BITMAPPATHLEN

Cause
None.

Solution
None.

3.55.91 12390
Line in the left section text must not exceed 255 characters.

Error ID
ERR_CBP_LEFTSECTIONLEN

1393
3 ERROR CODES

Error name
CBP_LEFTSECTIONLEN

Cause
None.

Solution
None.

3.55.92 12391
Line in the center section text must not exceed 255 characters.

Error ID
ERR_CBP_CENTERSECTIONLEN

Error name
CBP_CENTERSECTIONLEN

Cause
None.

Solution
None.

3.55.93 12392
Line in the right section text must not exceed 255 characters.

Error ID
ERR_CBP_RIGHTSECTIONLEN

Error name
CBP_RIGHTSECTIONLEN

Cause
None.

Solution
None.

3.55.94 12393
Configuration is incomplete.

Error ID
ERR_FBS_FORMPARAMNOTCOMPLETE

1394 www.honeywell.com
 3 ERROR CODES

Error name
FBS_FORMPARAMNOTCOMPLETE

Cause
None.

Solution
Press Yes to continue or No to ignore.

3.55.95 12394
Control Builder Journaling failed.

Error ID
ERR_CBJ_FAILEDCHNG

Error name
CBJ_FAILEDCHNG

Cause
Control Builder Journaling CDA call failed.

Solution
None.

3.55.96 12395
Control Builder Journaling failed, load succeeded.

Error ID
ERR_CBJ_FAILEDLDS

Error name
CBJ_FAILEDLDS

Cause
Control Builder Journaling CDA call failed.

Solution
None.

3.55.97 12396
Control Builder Journaling failed, load failed.

Error ID
ERR_CBJ_FAILEDLDF

1395
3 ERROR CODES

Error name
CBJ_FAILEDLDF

Cause
Control Builder Journaling CDA call failed.

Solution
None.

3.55.98 12397
Control Builder Journaling failed, checkpoint operation succeeded.

Error ID
ERR_CBJ_FAILEDSNPRST

Error name
CBJ_FAILEDSNPRST

Cause
Control Builder Journaling CDA call failed.

Solution
None.

3.55.99 12398
Control Builder Journaling failed, deleted.

Error ID
ERR_CBJ_FAILEDDELS

Error name
CBJ_FAILEDDELS

Cause
Control Builder Journaling CDA call failed.

Solution
None.

3.55.100 12399
Control Builder Journaling failed, delete failed.

Error ID
ERR_CBJ_FAILEDDELF

1396 www.honeywell.com
 3 ERROR CODES

Error name
CBJ_FAILEDDELF

Cause
Control Builder Journaling CDA call failed.

Solution
None.

1397
3 ERROR CODES

3.56 Codes 12400 to 12497

Related topics
“12400” on page 1400
“12401” on page 1400
“12402” on page 1400
“12403” on page 1401
“12404” on page 1401
“12405” on page 1401
“12406” on page 1402
“12407” on page 1402
“12408” on page 1402
“12409” on page 1403
“12410” on page 1403
“12411” on page 1403
“12412” on page 1404
“12413” on page 1404
“12414” on page 1404
“12415” on page 1405
“12416” on page 1405
“12417” on page 1405
“12418” on page 1406
“12419” on page 1406
“12420” on page 1406
“12421” on page 1407
“12422” on page 1407
“12423” on page 1407
“12424” on page 1408
“12425” on page 1408
“12426” on page 1408
“12427” on page 1409
“12428” on page 1409
“12429” on page 1409
“12430” on page 1410
“12431” on page 1410
“12432” on page 1410
“12433” on page 1411
“12434” on page 1411
“12435” on page 1411
“12436” on page 1412
“12437” on page 1412
“12438” on page 1412
“12439” on page 1413
“12440” on page 1413
“12441” on page 1413
“12442” on page 1414
“12443” on page 1414

1398 www.honeywell.com
 3 ERROR CODES

“12444” on page 1414

“12445” on page 1415
“12446” on page 1415
“12447” on page 1416
“12448” on page 1416
“12449” on page 1416
“12450” on page 1417
“12451” on page 1417
“12452” on page 1417
“12453” on page 1418
“12454” on page 1418
“12455” on page 1418
“12456” on page 1419
“12457” on page 1419
“12461” on page 1419
“12462” on page 1420
“12463” on page 1420
“12464” on page 1420
“12465” on page 1421
“12466” on page 1421
“12467” on page 1422
“12468” on page 1422
“12469” on page 1422
“12470” on page 1423
“12471” on page 1423
“12472” on page 1423
“12473” on page 1424
“12474” on page 1424
“12475” on page 1425
“12476” on page 1425
“12477” on page 1425
“12478” on page 1426
“12479” on page 1426
“12481” on page 1426
“12482” on page 1427
“12483” on page 1427
“12484” on page 1427
“12485” on page 1428
“12486” on page 1428
“12487” on page 1428
“12488” on page 1429
“12489” on page 1429
“12490” on page 1429
“12491” on page 1430
“12492” on page 1430
“12493” on page 1430
“12494” on page 1431
“12495” on page 1431

1399
3 ERROR CODES

“12496” on page 1431

3.56.1 12400
The value entered is outside the allowable range.

Error ID
ERR_FBS_OUTOFRANGE

Error name
FBS_OUTOFRANGE

Cause
None.

Solution
None.

3.56.2 12401
Synchronization is in progress.

Error ID
ERR_CBIXPGUI_SYNCINPRGRS

Error name
None.

Cause
You attempted to invoke the import or export dialog while ER synchronization was in progress.

Solution
Wait for synchronization to complete, then try again to invoke the import or export dialog.

3.56.3 12402
Error Accessing Access Lock Parameter.

Error ID
ERR_FBS_ACCESSLOCKACCESSERR

Error name
FBS_ACCESSLOCKACCESSERR

Cause
Error returned from pIParam->GetLoadDestination() call.

1400 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.56.4 12403
Error Spawning DEVFMW task.

Error ID
ERR_UCD_DEVFMW_SPAWN_ERROR

Error name
UCD_DEVFMW_SPAWN_ERROR

Cause
Error returned from O/S when attempted to launch firmware load task.

Solution
None.

3.56.5 12404
Error accessing EECode.

Error ID
ERR_UCD_EECODE_ACCESS_ERROR

Error name
UCD_EECODE_ACCESS_ERROR

Cause
Error returned from CL when attempting to access EECode for an Uncommissioned Field Device.

Solution
None.

3.56.6 12405
Error Writing Tag and/or Address to Field Device.

Error ID
ERR_UCD_WRITE_TO_DEVICE_ERROR

Error name
UCD_WRITE_TO_DEVICE_ERROR

Cause
Error returned from Fieldbus Interface Module (FIM).

1401
3 ERROR CODES

Solution
Try again.

3.56.7 12406
Error accessing Link Block Name.

Error ID
ERR_UCD_LINK_BLOCK_NAME_ACCESS_ERROR

Error name
UCD_LINK_BLOCK_NAME_ACCESS_ERROR

Cause
Error returned from GetName call to access name.

Solution
None.

3.56.8 12407
Could not instantiate monitor object for UCD Dialog.

Error ID
ERR_UCD_NO_MEM_FOR_MONITOR_OBJ_ERROR

Error name
UCD_NO_MEM_FOR_MONITOR_OBJ_ERROR

Cause
Memory not available.

Solution
None.

3.56.9 12408
Control does not support a method.

Error ID
ERR_CB_GETMETHODDISPID

Error name
CB_GETVALUEMETHOD

Cause
Control was embedded in a configuration form and does not have required methods implemented.

1402 www.honeywell.com
 3 ERROR CODES

Solution
Call TAC - this should not occur.

3.56.10 12409
Cannot invoke the specified method for the parameter on the embedded activeX control (NMA) VcrList
(VCRL).

Error ID
ERR_CB_INVMETHOD

Error name
Error Invoking method on Parameter.

Cause
Cannot invoke the specified method for the parameter on the embedded activeX control.

Solution
Call TAC - this should not occur.

3.56.11 12410
Variants supplied to fetch Limits for items by ActiveX control functions have not been initialized.

Error ID
ERR_CB_GETLMTBADVAR

Error name
CB_GETLMTBADVAR

Cause
ActiveX control must initialize Variants.

Solution
Call TAC - this should not occur.

3.56.12 12411
No Variants were supplied to fetch Limits for items by ActiveX control functions.

Error ID
ERR_CB_GETLMTNOVAR

Error name
CB_GETLMTNOVAR

Cause
ActiveX control must initialize Variants

1403
3 ERROR CODES

Solution
Call TAC - this should not occur.

3.56.13 12412
Get bad variant description.

Error ID
ERR_CB_GETDESCBADVAR

Error name
CB_GETDESCBADVAR

Cause
ActiveX control must initialize Variants.

Solution
Call TAC - this should not occur.

3.56.14 12413
No Variants were supplied to fetch Descriptions for items by ActiveX control functions.

Error ID
ERR_CB_GETDESCNOVAR

Error name
CB_GETDESCNOVAR

Cause
ActiveX control must initialize Variants.

Solution
Call TAC - this should not occur.

3.56.15 12414
Fetch Descriptions for items by ActiveX control functions is invalid because the parameter is not an
enumeration.

Error ID
ERR_CB_GETDESCINVTYPE

Error name
CB_GETDESCINVTYPE

Cause
ActiveX control must initialize Variants.

1404 www.honeywell.com
 3 ERROR CODES

Solution
Call TAC - this should not occur.

3.56.16 12415
Error Accessing Unit String.

Error ID
ERR_FBS_UNITSTRINGERROR

Error name
FBS_UNITSTRINGERROR

Cause
Error returned from pIParam->GetUnitString() call

Solution
None

3.56.17 12416
Uncommissioned Device item and project device item are already matched.

Error ID
ERR_UCD_MATCHEDPAIR

Error name
UCD_MATCHEDPAIR

Cause
None.

Solution
None.

3.56.18 12417
Uncommissioned device has been previously matched to project device.

Error ID
ERR_UCD_UCDPREVISOULYMATCHEDTOPROJDEV

Error name
UCD_UCDPREVISOULYMATCHEDTOPROJDEV

Cause
None.

1405
3 ERROR CODES

Solution
Be sure correct device is selected or use Device Unmatch command and try again.

3.56.19 12418
Uncommissioned device has been previously matched.

Error ID
ERR_UCD_UCDPREVISOULYMATCHED

Error name
UCD_UCDPREVISOULYMATCHED

Cause
None.

Solution
None.

3.56.20 12419
Templates mismatch is found for the selected project device and the selected uncommissioned device, match
fails

Error ID
ERR_UCD_TEMPLATEMISMATCH

Error name
UCD_TEMPLATEMISMATCH

Cause
Some configuration value does not match.

Solution
Check/change configuration values and try again.

3.56.21 12420
Writing to the tag of the uncommissioned device failed.

Error ID
ERR_UCD_WRITETAGERROR

Error name
UCD_WRITETAGERROR

Cause
None.

1406 www.honeywell.com
 3 ERROR CODES

Solution
Check tag entry and device state. Try again.

3.56.22 12421
Writing to the address of the uncommissioned device failed.

Error ID
ERR_UCD_WRITEADDRESSERROR

Error name
UCD_WRITEADDRESSERROR

Cause
None.

Solution
Check address entry and device state. Try again.

3.56.23 12422
The uncommissioned device's data cannot be retrieved. Match failed.

Error ID
ERR_UCD_UCDDATANOTRETRIEVED

Error name
UCD_UCDDATANOTRETRIEVED

Cause
None.

Solution
Check the H1 link and try again.

3.56.24 12423
Control Execution Environment (CEE) is in RUN mode.

Error ID
ERR_CB_CEERUNNING

Error name
CB_CEERUNNING

Cause
CEEs are not permitted to be automatically set to the IDLE state.

1407
3 ERROR CODES

Solution
Manually inactivate the CEE(s) in the load list and proceed with the load operation.

3.56.25 12424
Some control elements remain in the ACTIVE or In-Service states.

Error ID
ERR_MISMATCHNOTACKNOWLEDGED

Error name
MISMATCHNOTACKNOWLEDGED

Cause
You have chosen not to automatically inactivate these elements. Load cannot proceed.

Solution
Change control element states manually or select the automatic operation, and try again.

3.56.26 12425
Device Replacement cannot proceed because the selected device is still online.

Error ID
ERR_DEVICEONLINE

Error name
DEVICEONLINE

Cause
None.

Solution
None.

3.56.27 12426
The assignment request cannot be processed.

Error ID
ERR_FBS_ASSIGNCANTPROCESSED

Error name
FBS_ASSIGNCANTPROCESSED

Cause
No item has been selected.

1408 www.honeywell.com
 3 ERROR CODES

Solution
Select applicable item and try again.

3.56.28 12427
The device match request cannot be processed because the communication cannot be established to the selected
uncommissioned device.

Error ID
ERR_DEVICENOCOMMUNICATION

Error name
DEVICENOCOMMUNICATION

Cause
None.

Solution
Check the H1 link and try again.

3.56.29 12428
Device match cannot proceed because the template of the selected uncommissioned device has not been
installed.

Error ID
ERR_DEVICETEMPLATENOTINSTALLED

Error name
DEVICETEMPLATENOTINSTALLED

Cause
None.

Solution
Use the Control Builder File>New>Type>Fieldbus Device menu selection to create a device template and try
again.

3.56.30 12429
Device replacement fails because the templates of the replacement device and the device to be replaced are
different.

Error ID
ERR_REPLDEVTEMPLATEMISMATCH

Error name
REPLDEVTEMPLATEMISMATCH

1409
3 ERROR CODES

Cause
Only devices with exactly same templates can replace each other.

Solution
Check device configuration and/or use the Control Builder File>New>Type>Fieldbus Device menu selection to
create an applicable template. Try again.

3.56.31 12430
BitString value may not be changed because bitstring data is in error.

Error ID
ERR_FBS_BITSTRING_DATA_IS_IN_ERROR

Error name
FBS_BITSTRING_DATA_IS_IN_ERROR

Cause
VT_ERROR indicated on Bitstring Data.

Solution
None.

3.56.32 12431
Import Client Initialization error.

Error ID
ERR_CBIXPGUI_EXPORT_INIT_CLIENT_ERR

Error name
CBIXPGUI_EXPORT_INIT_CLIENT_ERR

Cause
Error returned from IXP_InitClient.

Solution
None.

3.56.33 12432
Import Client Initialization error.

Error ID
ERR_CBIXPGUI_IMPORT_INIT_CLIENT_ERR

Error name
CBIXPGUI_IMPORT_INIT_CLIENT_ERR

1410 www.honeywell.com
 3 ERROR CODES

Cause
Error returned from IXP_InitClient.

Solution
None.

3.56.34 12433
The selected Device is not matched.

Error ID
ERR_DEVICEUNMATCHED

Error name
DEVICEUNMATCHED

Cause
None.

Solution
None.

3.56.35 12434
An object embedded in this display is being used by another application on this computer. Only one of these
objects can be used at a time.

Error ID
ERR_CV_EMBEDDED_OBJECT_ALREADY_IN_USE

Error name
CV_EMBEDDED_OBJECT_ALREADY_IN_USE

Cause
Two instances of station on single CPU attempting to use ActiveX objects. (For example, chart visualization.)

Solution
Only one instance supported simultaneously.

3.56.36 12435
No item has been selected, the Convert request cannot be processed.
Correct the problem and try again.

Error ID
ERR_CB_CONVERTCANTPROCESSED

1411
3 ERROR CODES

Error name
CB_CONVERTCANTPROCESSED

Cause
None.

Solution
None.

3.56.37 12436
The value entered for parameter TREND.NUMPARAMS is bad and will be reset.

Error ID
ERR_FBS_RESETNUMTRENDS

Error name
FBS_RESETNUMTRENDS

Cause
The value for Number of Trend Parameters is not valid.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.38 12437
The value entered for parameter HIST.NUMPARAMS is bad and will be reset.

Error ID
ERR_FBS_RESETNUMHIST

Error name
FBS_RESETNUMHIST

Cause
The value for Number of History Parameters is not valid.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.39 12438
The value entered for parameter GROUP.NUMPARAMS is bad and will be reset.

Error ID
ERR_FBS_RESETNUMGROUPS

1412 www.honeywell.com
 3 ERROR CODES

Error name
FBS_RESETNUMGROUPS

Cause
The value for Number of Group Parameters is not valid.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.40 12439
The current value for parameter HIST.NUMPARAMS is bad. The grid will contain one History row.

Error ID
ERR_FBS_BADNUMHIST

Error name
FBS_BADNUMHIST

Cause
The value for Number of History Parameters is bad.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.41 12440
The current value for parameter TREND.NUMPARAMS is bad. The grid will contain one Trend row.

Error ID
ERR_FBS_BADNUMTREND

Error name
FBS_BADNUMTREND"

Cause
The value for Number of Trend Parameters is bad.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.42 12441
The current value for parameter GROUP.NUMPARAMS is bad. The grid will contain one Group row.

Error ID
ERR_FBS_BADNUMGROUP

1413
3 ERROR CODES

Error name
FBS_BADNUMGROUP

Cause
The value for Number of Group Parameters is bad.

Solution
The value is reset to 1. Try again using a number between 1 to 25.

3.56.43 12442
The parameter has already been chosen for Configuration in a different row. You can specify a parameter only
once for History Configuration.

Error ID
ERR_FBS_DUPLICATE_PARAMENTRY

Error name
FBS_DUPLICATE_PARAMENTRY

Cause
The same parameter has been chosen in two different rows for History.

Solution
Enter a different parameter.

3.56.44 12443
The Gating Parameter specified is not of valid type.

Error ID
ERR_FBS_INVALID_GATEPARAMTYPE

Error name
FBS_INVALID_GATEPARAMTYPE

Cause
Only Boolean and Enumeration parameters can be specified as Gating Parameters.

Solution
The value is discarded. Specify a different parameter.

3.56.45 12444
Deletion of the History Parameter would cause the rest of the Configuration also to be deleted. Do you want to
continue?

1414 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_FBS_DELETE_HISTPARAM

Error name
FBS_DELETE_HISTPARAM

Cause
This Error message is displayed when you attempt to delete a History Parameter in the Configuration Grid.

Solution
If you answer yes, all the configuration information in the row is deleted. If you answer No, the previous value
of the History parameter is restored.

3.56.46 12445
The Point Name Specified is Invalid. Only the parameters of the given Point can be specified for History/Trend/
Group Configuration.

Error ID
ERR_FBS_INVALID_TAG_SPECIFIED

Error name
FBS_INVALID_TAG_SPECIFIED

Cause
You have specified a parameter that does not belong to the current Point or one of its basic blocks for History/
Trend/Group Configuration in Tagged Object Configuration Forms.

Solution
The Cell contents are cleared. Specify a new parameter for Configuration.

3.56.47 12446
Invalid Entry.

Error ID
ERR_FBS_INVALID_ENTRY

Error name
FBS_INVALID_ENTRY"

Cause
You have specified a parameter for History/Trend/Group with a format that does not adhere to either
Point.Parameter or Point.Block.Parameter form.

Solution
The Cell contents are cleared. Specify a new parameter for Configuration.

1415
3 ERROR CODES

3.56.48 12447
This combination of Trend Number and Position has already been chosen.

Error ID
ERR_FBS_DUPLICATE_TRENDNUMPOS

Error name
FBS_DUPLICATE_TRENDNUMPOS

Cause
You have specified a Trend Number and Position already chosen for some other parameter that is already
configured.

Solution
The Trend Number and Position Cell contents are cleared. Specify a new combination of Trend Number and
Position for Configuration.

3.56.49 12448
This combination of Group Number and Position has already been chosen.

Error ID
ERR_FBS_DUPLICATE_GROUPNUMPOS

Error name
FBS_DUPLICATE_GROUPNUMPOS

Cause
You have specified a Group Number and Position already chosen for some other parameter that is already
configured.

Solution
The Group Number and Position Cell contents are cleared. Specify a new combination of Group Number and
Position for Configuration.

3.56.50 12449
This operation cannot be performed because there must be at least one History row remaining in the grid.

Error ID
ERR_FBS_MINHISTROWS

Error name
FBS_MINHISTROWS

Cause
You have tried to delete the only remaining row in the History Configuration Grid.

1416 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.56.51 12450
This operation cannot be performed because there must be at least one row for Trend Configuration remaining
in the grid.

Error ID
ERR_FBS_MINTRENDROWS

Error name
FBS_MINTRENDROWS

Cause
You have tried to delete the only remaining row in the Trend Configuration Grid

Solution
None

3.56.52 12451
This operation cannot be performed because there must be at least one row for Group Configuration remaining
in the grid.

Error ID
ERR_FBS_MINGROUPROWS

Error name
FBS_MINGROUPROWS

Cause
You have tried to delete the only remaining row in the Group Configuration Grid

Solution
None.

3.56.53 12452
None.

Error ID
ERR_FBS_ALLOCPROJPARAMDLG

Error name
FBS_ALLOCPROJPARAMDLG

1417
3 ERROR CODES

Cause
None.

Solution
None.

3.56.54 12453
Block is locked.

Error ID
ERR_CB_BLKLOCKED

Error name
FBS_CB_BLKLOCKED

Cause
The selected block is locked by its container block.

Solution
Unlock the block by saving the container block.

3.56.55 12454
Block chart is open.

Error ID
ERR_CB_BLKCHARTOPEN

Error name
CB_BLKCHARTOPEN

Cause
The chart of the selected block is open and as a result, the block is locked.

Solution
Close the chart of the selected block.

3.56.56 12455
System is not finished collecting the Current State data for some items.

Error ID
ERR_CB_CURSTATENOTRETRIEVED

Error name
CB_CURSTATENOTRETRIEVED

1418 www.honeywell.com
 3 ERROR CODES

Cause
Delays in retrieving the current states of the selected items.

Solution
Wait for the current states to come back.

3.56.57 12456
Fieldbus Methods Manager application startup failed.

Error ID
ERR_CB_FMM_APP

Error name
CB_FMM_APP

Cause
Error number equals:
1. The Fieldbus Methods Manager application specified is not an executable program.
2. Not enough memory available in which to run the Fieldbus Methods Manager.
3. The Fieldbus Methods Manager application file could not be found.
These are the most likely errors.

Solution
None.

3.56.58 12457
The un-commissioned device's data cannot be retrieved. The match failed.

Error ID
ERR_UCD_UCDDATAFAILRETRIEVED

Error name
UCD_UCDDATAFAILRETRIEVED

Cause
Get the UCD data error.

Solution
Try again.

3.56.59 12461
Cannot load item, the associated item is being used.

1419
3 ERROR CODES

Error ID
ERR_CB_LOCK

Error name
CB_LOCK

Cause
The associated load item has been locked.

Solution
Close the open chart.

3.56.60 12462
Select the target object(s) for the change target operation.

Error ID
ERR_CB_CP_NOTHINGSELECTED

Error name
CB_CP_NOTHINGSELECTED

Cause
User has not selected the target object(s) for the change parent operation.

Solution
Select one or more target objects for the change parent operation.

3.56.61 12463
Please select the new parent template.

Error ID
ERR_CB_CP_NONEWPARENTSELECTED

Error name
CB_CP_NONEWPARENTSELECTED

Cause
User has not selected the template to become the new parent template.

Solution
Select the template to become the new parent template.

3.56.62 12464
The Change Parent Operation is still in progress.

1420 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CB_CP_OPINPRGS

Error name
CB_CP_OPINPRGS

Cause
The user needs to wait for the change parent operation to complete before performing the selected action.

Solution
Wait till the operation completes.

3.56.63 12465
Change Parent Operation is not permitted for this embedded template.

Error ID
ERR_CB_CP_CANTCHGPRNTFOREMBEDDEDTMPLT

Error name
CB_CP_CANTCHGPRNTFOREMBEDDEDTMPLT

Cause
User has selected an embedded template for the target of the change parent operation.
1. If the user selects an embedded block in a strategy, and that embedded block is derived from an embedded
template, change parent is not permitted.
2. If the user selects an embedded block in a template which is derived from another user template, and the
block selected is embedded in an ancestor template,.

Solution
Select a valid target object for the change parent operation.

3.56.64 12466
Change Parent Operation is not permitted for an embedded control.

Error ID
ERR_CB_CP_NOOTHERPARENTAVAILABLE

Error name
CB_CP_CANTCHGPRNTFOREMBEDDEDCTRL

Cause
User has selected an embedded control for the target of the Change Parent Operation.

Solution
Select a valid target object for the Change Parent Operation.

1421
3 ERROR CODES

3.56.65 12467
Change Parent Operation is not permitted for an embedded control.

Error ID
ERR_CB_CP_CANTCHGPRNTFOREMBEDDEDCTRL

Error name
CB_CP_CANTCHGPRNTFOREMBEDDEDCTRL

Cause
User has selected an embedded control for the target of the Change Parent Operation.

Solution
Select a valid target object for the Change Parent Operation.

3.56.66 12468
Change Parent Operation is only permitted from the project tree or the library tree.

Error ID
ERR_CB_CP_OPNOTVALIDONMONITORTREE

Error name
CB_CP_OPNOTVALIDONMONITORTREE

Cause
User has selected a Change Parent Operation for an object in the monitor (loaded) tree.

Solution
Select the object from the project tree.

3.56.67 12469
Change Parent Operation Could Not Get Control Identifier for New Parent Template.

Error ID
ERR_CB_CP_CANT_GET_NEWPARENT_CTRLID

Error name
CB_CP_CANT_GET_NEWPARENT_CTRLID

Cause
User has selected a Change Parent Operation, and we could not successfully get the CtrlID of the new parent.

Solution
None

1422 www.honeywell.com
 3 ERROR CODES

3.56.68 12470
Change Parent Operation found no new parent available.

Error ID
ERR_CB_CP_NONEWPARENTAVAILABLE

Error name
CB_CP_NONEWPARENTAVAILABLE

Cause
A user on another CB has done a Change Parent on this control, and eliminated the validity of the Change
Parent Operation now.

Solution
None - Cancel the change parent wizard.

3.56.69 12471
On Process Server Migration is enabled.

Error ID
ERR_CB_OPMENABLED

Error name
CB_OPMENABLED

Cause
This string is only seen within another error; it should never be seen independently. Data base changes are not
permitted during on-process Server migration.

Solution
Complete on-process migration.

3.56.70 12472
Make New Wire Failed.

Error ID
ERR_CB_MAKENEWWIRE

Error name
CB_MAKENEWWIRE

Cause
Make New Wire function failed due to internal CB problems.

1423
3 ERROR CODES

Solution
None - If this occurs in Monitor mode, reload to Monitor the Strategy, it is Contained Children, and any
Strategies that are connected via Parameter Connectors.
Within Project mode, there is not much that can be done other than report how the error can be readily
duplicated.

3.56.71 12473
Wire attempted automatic Pin addition; failed when Parameter was not found.

Error ID
ERR_CB_ADDPINFAILED

Error name
CB_ADDPINFAILED

Cause
Chart was originally created with both sides of Wire existing and connected to 2 exposed pins. One side of the
Wire (usually the From side) has been detected missing when the Chart was opened.
CB tried to expose the Pin from the Parameter - but the Parameter is completely gone. Parameter is most likely
a Projected Parameter.
This can happen when in Monitor mode when a partial set of changed Contained Strategies are Re-Loaded. (The
original Loaded Strategies expect Projected Parameters that do not match up with the new ones.)
This can also happen for the Version Control System when a partial set of Contained Strategies are returned to
an earlier version.

Solution
In Monitor mode, Re-Load the rest of the Contained set.
For VCS, return all Strategies to the version when was wired and well connected.

3.56.72 12474
Failed to connect to CDA. If a system migration is in progress and your Experion PKS Servers are running at
different releases, this error may be caused because your client software is not compatible with the Experion
PKS Server it is connected to.
Objects on the monitor tree will appear in gray. Monitored values will display error.

Error ID
ERR_CB_MIGCDAFLDCB

Error name
CB_MIGCDAFLDCB

Cause
Failed to connect to CDA. Either OPM is in progress or connected to secondary ERDB.

Solution
Attempt to connect to the other server, or upgrade client firmware to be compatible with server

1424 www.honeywell.com
 3 ERROR CODES

3.56.73 12475
Failed to connect to CDA. If a system migration is in progress and your Experion PKS Servers are running at
different releases, this error may be caused because your client software is not compatible with the Experion
PKS Server it is connected to. Monitored values will display error.

Error ID
ERR_CB_MIGCDAFLDCHART

Error name
CB_MIGCDAFLDCHART

Cause
Failed to connect to CDA. Either OPM is in progress or connected to secondary ERDB.

Solution
Attempt to connect to the other server, or upgrade client firmware to be compatible with server

3.56.74 12476
Cannot create FTEB with Base IP 0.0.0.0. Change network addressing to valid Base IP in View >
SystemPreferences > EmbeddedFTE.

Error ID
ERR_CB_CANNOTCREATEFTEB

Error name
CB_CANNOTCREATEFTEB

Cause
The System Preferences for FTEB are all 0.0.0.0

Solution
Change the Embedded System Preferences for FTEB to a valid Base IP address.

3.56.75 12477
PID Convert Completed, with errors.

Error ID
ERR_CBC_COMPLETEWITHERRORS

Error name
CBC_COMPLETEWITHERRORS

Cause
See errors reported from IXP Tool. Can also be caused by ProfitLoop Assistant not being installed when
Convert PID Tuning Parameters has been selected.

1425
3 ERROR CODES

Solution
See Workarounds for errors reported from IXP Tool. If it is required to convert PID Tuning parameters to a PID-
PL Model, the ProfitLoop Assistant must be installed.

3.56.76 12478
Invalid Value for the Primary Signature Meaning (PRIMARYSIG).

Error ID
ERR_CB_INVALIDPYSIG

Error name
CB_INVALIDPYSIG

Cause
The Primary Signature Meaning value is an empty string.

Solution
Change the Primary Signature Meaning value to non-empty valid string.

3.56.77 12479
Invalid Value for the for the Secondary Signature Meaning (SECONDARYSIG.

Error ID
ERR_CB_INVALIDSYSIG

Error name
CB_INVALIDSYSIG

Cause
The Secondary Signature Meaning value is an empty string.

Solution
Change the Secondary Signature Meaning value to non-empty valid string.

3.56.78 12481
An unexpected error occurred in accessing the Header/Footer layout.

Error ID
ERR_CBLAYOUTUNEXPECTED

Error name
CBLAYOUTUNEXPECTED

Cause
Should not occur.

1426 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.56.79 12482
An attempt was made to modify the Header/Footer layout when it was read only.

Error ID
ERR_CBLAYOUTREADONLY

Error name
CBLAYOUTREADONLY

Cause
Should not occur.

Solution
None.

3.56.80 12483
An invalid element of the Header/Footer layout was specified.

Error ID
ERR_CBLAYOUTBADINDEX

Error name
CBLAYOUTBADINDEX

Cause
Should not occur.

Solution
None.

3.56.81 12484
Not able to access the specified image file in the Header/Footer layout.

Error ID
ERR_CBLAYOUTBADFILE

Error name
CBLAYOUTBADFILE

Cause
Specified a file name that does not exist, or there were other access errors.

1427
3 ERROR CODES

Solution
Change the name of the file and make sure the file exists.

3.56.82 12485
Enter a number greater than or equal to 0 for the X-coordinate.

Error ID
ERR_CBHF_BADXCOORD

Error name
CBHF_BADXCOORD

Cause
Provided an invalid value for the X co-ord (<0, blank, or no numbers).

Solution
Enter a valid number.

3.56.83 12486
Enter a number greater than or equal to 0 for the Y-coordinate.

Error ID
ERR_CBHF_BADYCOORD

Error name
CBHF_BADYCOORD

Cause
Provided an invalid value for the Y co-ord (<0, blank, or no numbers).

Solution
Enter a valid number.

3.56.84 12487
Enter a number greater than 0 for the length/width.

Error ID
ERR_CBHF_BADLENGTH

Error name
CBHF_BADLENGTH

Cause
Provided an invalid value for the length (<0, blank, or no numbers).

1428 www.honeywell.com
 3 ERROR CODES

Solution
Enter a valid number.

3.56.85 12488
Enter a number greater than 0 for the height.

Error ID
ERR_CBHF_BADHEIGHT

Error name
CBHF_BADHEIGHT

Cause
Provided an invalid value for the height (<0, blank, or no numbers).

Solution
Enter a valid number.

3.56.86 12489
Unable to access the specified image file.

Error ID
ERR_CBHF_BADFILENAME

Error name
CBHF_BADFILENAME

Cause
The image file could not be read or it is not a valid image file.

Solution
Enter the name of a valid image file.

3.56.87 12490
Enter a text that is 255 characters in length or less.

Error ID
ERR_CBHF_BADTEXT

Error name
CBHF_BADTEXT

Cause
Provided no text or text longer than 255 characters.

1429
3 ERROR CODES

Solution
Enter valid text.

3.56.88 12491
Enter a number greater than 0 for the height of the header.

Error ID
ERR_CBHF_BADHEADERHEIGHT

Error name
CBHF_BADHEADERHEIGHT

Cause
Provided an invalid value for the height (<0, blank, or no numbers).

Solution
Enter a valid number.

3.56.89 12492
Enter a number greater than 0 for the height of the footer.

Error ID
ERR_CBHF_BADFOOTERHEIGHT

Error name
CBHF_BADFOOTERHEIGHT

Cause
Provided an invalid value for the height (<0, blank, or no numbers).

Solution
Enter a valid number.

3.56.90 12493
The number of allowed fonts has been reached.

Error ID
ERR_CBHF_TOOMANYFONTS

Error name
CBHF_TOOMANYFONTS

Cause
Tried to use too many fonts for the header/footer layout.

1430 www.honeywell.com
 3 ERROR CODES

Solution
Reduce number of fonts used for layout.

3.56.91 12494
Unable to delete an open font.

Error ID
ERR_CBHF_FONTNOTDELETED

Error name
CBHF_FONTNOTDELETED

Cause
System error.

Solution
None.

3.56.92 12495
Unable to create a font.

Error ID
ERR_CBHF_FONTNOTCREATED

Error name
CBHF_FONTNOTCREATED

Cause
System error.

Solution
None.

3.56.93 12496
ERDB Replication has Failed.

Error ID
ERR_CBIXPGUI_SYNCFAILED

Error name
CBIXPGUI_SYNCFAILED

Cause
Attempted to invoke the import / export / convert pid to pid-pl dialog when ERDB Replication has failed.

1431
3 ERROR CODES

Solution
Fix the cause of the failure, and try to import / export / convert pid again.

1432 www.honeywell.com
 3 ERROR CODES

3.57 Codes 12501 to 12561

Related topics
“12501” on page 1434
“12502” on page 1434
“12505” on page 1434
“12506” on page 1435
“12507” on page 1435
“12508” on page 1435
“12509” on page 1436
“12510” on page 1436
“12511” on page 1436
“12512” on page 1437
“12513” on page 1437
“12514” on page 1437
“12515” on page 1438
“12516” on page 1438
“12517” on page 1438
“12518” on page 1439
“12520” on page 1439
“12521” on page 1439
“12522” on page 1440
“12523” on page 1440
“12525” on page 1440
“12530” on page 1441
“12531” on page 1441
“12532” on page 1441
“12533” on page 1442
“12534” on page 1442
“12535” on page 1442
“12536” on page 1443
“12537” on page 1443
“12538” on page 1443
“12539” on page 1444
“12540” on page 1444
“12541” on page 1444
“12542” on page 1445
“12543” on page 1445
“12544” on page 1445
“12545” on page 1446
“12546” on page 1446
“12547” on page 1446
“12548” on page 1447
“12549” on page 1447
“12550” on page 1447
“12551” on page 1448
“12556” on page 1448

1433
3 ERROR CODES

“12557” on page 1448

“12560” on page 1449
“12561” on page 1449

3.57.1 12501
Not allowed to change from Station because Control Confirmation was enabled.

Error ID
ERR_FBS_CHANGENOTALLOWD

Error name
FBS_CHANGENOTALLOWD

Cause
If Control Confirmation was enabled from Station, then no data is allowed to change from Station.

Solution
None. Unless user disables Control Confirmation in the Project and reloads.

3.57.2 12502
Change to not allowed. Close form, Change parameter from project side in Control Builder and reload.

Error ID
ERR_FBS_SCANWRITEREADONLY_STATION

Error name
FBS_SCANWRITEREADONLY_STATION

Cause
Error occurred because some of the parameters are not allowed to change from station.

Solution
Change the server parameter from a form in Control Builder and reload.

3.57.3 12505
Only Save As operation is allowed because of one/more of the following reasons:\n\tCDP deletions
made\n\tCDPs name changed\n\tCDPs datatype changed\nwhen instances/templates exist.

Error ID
ERR_CB_CDB_SAVE

Error name
CDB_SAVE

1434 www.honeywell.com
 3 ERROR CODES

Cause
User would have made either parameter deletions, changed parameter names and/or parameter datatypes.

Solution
Only save as operation is allowed

3.57.4 12506
Opening of new blocktype failed. Re-open for further edits.

Error ID
ERR_CB_CDB_NEWBLKTYPE_OPEN

Error name
CDB_NEWBLKTYPE_OPEN

Cause
Update of current document with the new document would have failed

Solution
None.

3.57.5 12507
This operation will overwrite the existing Custom Data Block type and convert any existing instances to match.
Do you wish to proceed?

Error ID
ERR_CB_CDB_OVERWRITE_BLKTYPE

Error name
CDB_OVERWRITE_BLKTYPE

Cause
Monitor side (loaded) instances exist and the blocktype is attempted for a save.

Solution
None.

3.57.6 12508
You do not have edit permission. The block is locked for edit by another user.

Error ID
ERR_CB_BLKTYPE_EDIT_PERM

Error name
CB_BLKTYPE_EDIT_PERM

1435
3 ERROR CODES

Cause
Editlock on the blocktype is set and the blocktype is attempted for edit from another user

Solution
None.

3.57.7 12509
Warning: This operation will compact and reassign all internal parameter identifiers. After performing this
operation it will be necessary to reload blocks which reference instances of this type. Proceed?

Error ID
ERR_CB_SAVEAS_RENEW_WARNING

Error name
SAVE_RENEW_WARNING

Cause
User is going to do a Save As Renew operation which would regenerate parameter codes for all parameters

Solution
Ignore the operation if not required.

3.57.8 12510
Save/Save As operations are not available because of exhaustion of internal parameter identifiers. Use Save As
Renew command.

Error ID
ERR_CB_SAVE_PARAMIDENT_EXHAUST

Error name
SAVE_PARAMIDENT_EXHAUST

Cause
Parameter codes have crossed their allocated range

Solution
User has to do a Save As Renew operation to regenerate all parameter codes.

3.57.9 12511
An unexpected error occurred in the provider.

Error ID
ERR_PROV_UNEXPECTED

1436 www.honeywell.com
 3 ERROR CODES

Error name
PROV_UNEXPECTED\n

Cause
Should not occur

Solution
None.

3.57.10 12512
Failed on COM interface.

Error ID
ERR_PROV_COMINTERFACE

Error name
PROV_COMINTERFACE\n

Cause
Should not occur.

Solution
None.

3.57.11 12513
Too many sessions of Control Builder and Enterprise Model Builder are running. Close one or more and retry.

Error ID
ERR_PROV_TOOMANYSESSIONS

Error name
PROV_TOOMANYSESSIONS

Cause
The user has attempted to run too many instances of the Control Builder and EM Builder simultaneously.

Solution
Close one or more instances of the CB or EMB and try again.

3.57.12 12514
Not allowed to change from Station because Control Confirmation was enabled.

Error ID
ERR_PROV_BADPROCESS

1437
3 ERROR CODES

Error name
PROV_BADPROCESS

Cause
Should not occur

Solution
Close all instances of CB and EMB and Configuration Studio and try again

3.57.13 12515
Cannot start the Microsoft Management Console for administering the database

Error ID
ERR_PROV_CANNOTSTART

Error name
PROV_CANNOTSTART

Cause
Should not occur.

Solution
Make sure MMC.EXE is in C:\windows\system32

3.57.14 12516
Invalid security context specified

Error ID
ERR_CB_SECURITY

Error name
CB_SECURITY

Cause
Attempt to bypass security validation via COM, or COM problem.

Solution
Make sure valid security information is passed to COM for builder initialization

3.57.15 12517
An error occurred during builder initialization

Error ID
ERR_CB_INITIALIZATION

1438 www.honeywell.com
 3 ERROR CODES

Error name
CB_INITIALIZATION

Cause
Should not occur.

Solution
None. Make sure the ERDB/EMDB services are running.

3.57.16 12518
Cannot close the builder, a chart has been modified and is open, or a form or dialog is open.

Error ID
ERR_CB_CANNOTCLOSE

Error name
CB_CANNOTCLOSE

Cause
Attempt to close the builder via the Configuration Studio, and the builder will not close.

Solution
Close any open forms or dialogs, and save any modified charts.

3.57.17 12520
Enter the name of an object to open.

Error ID
ERR_CB_OPEN_NONAME

Error name
CB_OPEN_NONAME

Cause
User did not enter any text in the open dialog.

Solution
Enter the name of an object to open.

3.57.18 12521
The name you entered does not exist. Make sure the name is spelled correctly.

Error ID
ERR_CB_OPEN_INVALIDNAME

1439
3 ERROR CODES

Error name
CB_OPEN_INVALIDNAME

Cause
User entered the name of an object that does not exist.

Solution
Make sure the entered name is spelled correctly.

3.57.19 12522
The object you wish to open is in another tree. Select the correct tree.

Error ID
ERR_CB_OPEN_WRONGTREE

Error name
CB_OPEN_WRONGTREE

Cause
User has selected a tree in which the object does not exist (that is, library vs. project)

Solution
Select the correct tree.

3.57.20 12523
The object you wish to open does not exist in the current view (that is, assignment or containment). Change the
view and try again.

Error ID
ERR_CB_OPEN_WRONGVIEW

Error name
CB_OPEN_WRONGVIEW

Cause
User has the wrong view selected.

Solution
Select the correct view.

3.57.21 12525
Propagation of Link Settings for the Following Devices is Failed! These Devices may fail to operate properly!

Error ID
ERR_PROPGATING_LINKSETTINGS

1440 www.honeywell.com
 3 ERROR CODES

Error name
PROPGATING_LINKSETTINGS

Cause
Error returned from Device

Solution
None.

3.57.22 12530
Invalid PD_TAG.

Error ID
ERR_CB_TAGNOTDEFINED

Error name
TAGNOTDEFINED

Cause
PD_TAG must be defined

Solution
None.

3.57.23 12531
Invalid PD_TAG.

Error ID
ERR_CB_ILLEGALCHAR

Error name
ILLEGALCHAR

Cause
Illegal character(s) encountered in PD_TAG.

Solution
None.

3.57.24 12532
Address is too High. Valid Address range is between 17 and 247

Error ID
ERR_CB_ADDRESS_TOO_HIGH

1441
3 ERROR CODES

Error name
ADDRESS_TOO_HIGH

Cause
None.

Solution
None.

3.57.25 12533
Address is too Low. Valid Address range is between 17 and 247

Error ID
ERR_CB_ADDRESS_TOO_LOW

Error name
ADDRESS_TOO_LOW

Cause
None.

Solution
None.

3.57.26 12534
Illegal Address syntax. Address should be numeric.

Error ID
ERR_CB_ILLEGAL_ADDRESS_SYNTAX

Error name
ILLEGAL_ADDRESS_SYNTAX

Cause
None.

Solution
None.

3.57.27 12535
The Address Specified has already been used on this link.

Error ID
ERR_CB_DUPLICATE_ADDRESS

1442 www.honeywell.com
 3 ERROR CODES

Error name
DUPLICATE_ADDRESS

Cause
None.

Solution
None.

3.57.28 12536
Invalid Parent Asset. Parent Asset must be defined.

Error ID
ERR_CB_PARENTASSETNOTDEFINED

Error name
PARENTASSETNOTDEFINED

Cause
None.

Solution
None.

3.57.29 12537
Device tag is already used for project or Uncommissioned devices

Error ID
ERR_CB_PDTAG_CONFLICT

Error name
CL_PDTAG_CONFLICT

Cause
None.

Solution
None.

3.57.30 12538
Device Address is already used for project or Uncommissioned devices

Error ID
CB_ADDRESS_CONFLICT

1443
3 ERROR CODES

Error name
CL_ADDRESS_CONFLICT

Cause
None.

Solution
None.

3.57.31 12539
Uncommissioned Device Fetch Busy

Error ID
ERR_CB_UCD_FETCH_BUSY

Error name
UCD_FETCH_BUSY

Cause
System is busy fetching the uncommissioned device data.

Solution
Retry the action later.

3.57.32 12540
Invalid security key provided

Error ID
ERR_CB_EMB_SECURITY

Error name
CB_EMB_SECURITY

Cause
(EMB) as stated.

Solution
Fix the call to SelectSystem to include the correct security key

3.57.33 12541
SelectSystem must be called before performing this action.

Error ID
ERR_CB_EMB_NOSYSTEM

1444 www.honeywell.com
 3 ERROR CODES

Error name
CB_EMB_NOSYSTEM

Cause
(EMB) as stated

Solution
Call SelecteSystem first

3.57.34 12542
Specified system/server key does not exist.

Error ID
ERR_CB_EMB_BADKEY

Error name
CB_EMB_BADKEY

Cause
(EMB) as stated

Solution
Fix code to provide correct key (ControlID).

3.57.35 12543
Unexpected error.

Error ID
ERR_CB_EMB_UNEXPECTED

Error name
CB_EMB_UNEXPECTED

Cause
Should not occur.

Solution
None.

3.57.36 12544
Cannot create binary file in def xml directory

Error ID
ERR_CB_CDBDLL_CREATEBINFILEFAILED

1445
3 ERROR CODES

Error name
ERR_CB_CDBDLL_CREATEBINFILEFAILED

Cause
Cannot create one of the binary files used for HEADER and DEFINITION def file parameters

Solution
Check directory permissions.

3.57.37 12545
Invalid binary file creation.

Error ID
ERR_CB_CDBDLL_BADBINFILECREATED

Error name
ERR_CB_CDBDLL_BADBINFILECREATED

Cause
Incorrectly create one of the binary files used for HEADER and DEFINITION def file parameters.

Solution
Save blocktype again.

3.57.38 12546
Blob information for definition parameter exceeds size limit.

Error ID
ERR_CB_CDBDLL_BLOBSIZEEXCEEDLIMIT

Error name
ERR_CB_CDBDLL_BLOBSIZEEXCEEDLIMIT

Cause
Size calculated for the blob is not support. It is too big.

Solution
Reduce the size by deleting some CDP information. That is, decrease array sizes, remove CDPs, use smaller
datatypes.

3.57.39 12547
Memory allocation failed.

Error ID
ERR_CB_CDBDLL_MEMORYALLOCFAILED

1446 www.honeywell.com
 3 ERROR CODES

Error name
ERR_CB_CDBDLL_MEMORYALLOCFAILE

Cause
Failed to allocated memory needed to do work.

Solution
Free some memory if you can.

3.57.40 12548
The total size of the checkpoint data for this block exceeds the supported size.

Error ID
ERR_CB_CDBDLL_OCDSIZEEXCEEDLIMIT

Error name
ERR_CB_CDBDLL_OCDSIZEEXCEEDLIMIT

Cause
Size calculated for the OCD buffer is not support. It is too big.

Solution
Reduce the size by deleting some CDP information. That is, change access lock to AppDevOnly (CDP will not
be saved in Checkpoint file), decrease array sizes, remove CDPs, use smaller datatypes.

3.57.41 12549
The parameter type is not supported.

Error ID
ERR_CB_CDBDLL_INVALIDPARAMTYPE

Error name
ERR_CB_CDBDLL_INVALIDPARAMTYPE

Cause
Parameter type is not supported.

Solution
Remove the CDP with the unsupported type.

3.57.42 12550
This combination of Insertion has already been chosen. Specify a different Insertion.

Error ID
ERR_FBS_DUPLICATE_INSERTIONS

1447
3 ERROR CODES

Error name
FBS_DUPLICATE_INSERTIONS

Cause
This Error message is displayed when the used specifies Insertions and already chosen for some other parameter
that is, already configured.

Solution
The CAB instance cell contents are cleared. The user can specify a new combination of CAB Instance for
Configuration.

3.57.43 12551
The current value for parameter INSERT is bad. The grid will contain no row.

Error ID
ERR_FBS_BADNUMINSERTION

Error name
FBS_BADNUMINSERTION

Cause
The value for Number of INSERT is not bad. It will be reset.

Solution
The value is reset to 0.

3.57.44 12556
Error Spawning Device Replacement EXE.

Error ID
ERR_DEVREP_SPAWN_ERROR

Error name
DEVREP_SPAWN_ERROR

Cause
Error returned from O/S when attempted to launch Device Replacement EXE.

Solution
None.

3.57.45 12557
The Station security level could not launch Device Replacement EXE.

1448 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_DEVREP_SECURITY_ERROR

Error name
DEVREP_SECURITY_ERROR

Cause
The Station did not have enough security level to launch the Device Replacement EXE

Solution
Change Station security level. Only Security level above Operator can launch the Device Replacement EXE.

3.57.46 12560
Invalid Value for the ReasonSet (REASONSET).The value Zero is not allowed. Enter the value which is in
between 1 to 100.

Error ID
ERR_CB_INVALIDREASONSET

Error name
CB_INVALIDREASONSET

Cause
If the value of the REASONSET Parameter is Zero.

Solution
Change the REASONSET to the value which is in between 1 to 100.

3.57.47 12561
The FTE Base IP address information is not defined for this system.

Error ID
ERR_CB_FTE_INVALID

Error name
CB_FTE_INVALID

Cause
The network type is FTE and its Base IP address information is invalid that is, either NULL or not configured.

Solution
Configure the Base IP address by using the following in Control Builder:
Use Tools > System Preferences > EmbeddedFTE

1449
3 ERROR CODES

3.58 Codes 12601 to 12747

Related topics
“12601” on page 1451
“12602” on page 1451
“12603” on page 1452
“12604” on page 1452
“12605” on page 1452
“12606” on page 1453
“12607” on page 1453
“12608” on page 1453
“12609” on page 1454
“12610” on page 1454
“12611” on page 1454
“12612” on page 1455
“12613” on page 1455
“12614” on page 1455
“12615” on page 1456
“12616” on page 1456
“12617” on page 1457
“12618” on page 1457
“12619” on page 1457
“12620” on page 1458
“12621” on page 1458
“12622” on page 1458
“12623” on page 1459
“12624” on page 1459
“12625” on page 1459
“12626” on page 1460
“12627” on page 1460
“12628” on page 1460
“12629” on page 1461
“12630” on page 1461
“12631” on page 1461
“12632” on page 1462
“12633” on page 1462
“12634” on page 1462
“12659” on page 1463
“12672” on page 1463
“12673” on page 1463
“12674” on page 1464
“12675” on page 1464
“12676” on page 1465
“12677” on page 1465
“12678” on page 1465
“12679” on page 1466
“12680” on page 1466

1450 www.honeywell.com
 3 ERROR CODES

“12681” on page 1466

“12682” on page 1467
“12683” on page 1467
“12684” on page 1467
“12685” on page 1468
“12686” on page 1468
“12687” on page 1468
“12688” on page 1469
“12689” on page 1469
“12690” on page 1470
“12691” on page 1470
“12692” on page 1470
“12693” on page 1471
“12694” on page 1471
“12747” on page 1471

3.58.1 12601
Cannot create FTE Module with the Base IP 0.0.0.0. Change network addressing to valid Base IP in
Tools->EmbeddedFTE

Error ID
ERR_CB_CANNOT_CREATE_FTE_MODULE

Error name
CB_CANNOT_CREATE_FTE_MODULE

Cause
If the System Preferences for FTE are all 0.0.0.0.

Solution
Change the Embedded System Preferences for FTE to valid Base IP address.

3.58.2 12602
An unexpected error occurred.

Error ID
ERR_CB_UNEXPETED_ERROR

Error name
CDB_UNEXPECTED_ERROR

Cause
An unexpected error occurred.

Solution
None

1451
3 ERROR CODES

3.58.3 12603
Error occurred while restoring embedded objects. Subsequent objects could not be processed and hence will not
be shown.

Error ID
ERR_CBDOBJECTSERIALIZEEXCEPTION

Error name
CBDOBJECTSERIALIZEEXCEPTION

Cause
This error may be thrown when embedded object link is not valid.

Solution
Correct the embedded object link or delete the object.

3.58.4 12604
Cannot convert selected items - Cannot connect to database.

Error ID
ERR_CBDCONVERTNOSESSION

Error name
CBDCONVERTNOSESSION

Cause
In order to convert an object, the Control Builder must exchange information with the database. The database
did/could not provide a session in which to exchange this information.

Solution
None

3.58.5 12605
A bad.resource arbitration error occurred.

Error ID
ERR_BADRESOURCEARBITRATION

Error name
BADRESOURCEARBITRATION

Cause
A bad.resource arbitration error occurred.

1452 www.honeywell.com
 3 ERROR CODES

Solution
None

3.58.6 12606
Blob information for definition parameter exceeds size limit.

Error ID
ERR_CB_PHASECPDLL_BLOBSIZEEXCEEDLIMIT

Error name
CB_PHASECPDLL_BLOBSIZEEXCEEDLIMIT

Cause
Size calculated for the blob is not support. It is too big.

Solution
Reduce the size by deleting some CDP information. That is, decrease array sizes, remove CDPs, use smaller
datatypes.

3.58.7 12607
The total size of the checkpoint data for this block exceeds the supported size.

Error ID
ERR_CB_PHASECPDLL_OCDSIZEEXCEEDLIMIT

Error name
CB_PHASECPDLL_OCDSIZEEXCEEDLIMIT

Cause
Size calculated for the OCD buffer is not support. It is too big.

Solution
Reduce the size by deleting some CDP information. That is, decrease array sizes, remove CDPs, use smaller
datatypes.

3.58.8 12608
The parameter type is not supported

Error ID
ERR_CB_PHASECPDLL_INVALIDPARAMTYPE

Error name
CB_PHASECPDLL_INVALIDPARAMTYPE

1453
3 ERROR CODES

Cause
Parameter type is not supported.

Solution
Remove the CDP with the unsupported type.

3.58.9 12609
The parameter definition is incomplete.

Error ID
ERR_CB_PHASECPDLL_INVALIDPARAM

Error name
CB_PHASECPDLL_INVALIDPARAM

Cause
Parameter definition in the def file is missing required fields. (that is, Parameter Name and Parameter Code).
This is a serious problem and the cause is unknown.

Solution
Try resaving the block information from PDE. If the problem persists call TAC.

3.58.10 12610
The Index of DI Block Pin exceeds the number of configured DI parameters

Error ID
ERR_FBS_DI_INVALIDINDEX

Error name
FBS_DI_INVALIDINDEX

Cause
The index of the DI Block Pin added exceeds the number of DI parameters configured.

Solution
Increase the number of DI parameters configured.

3.58.11 12611
The Index of DO Block Pin exceeds the number of configured DO parameters

Error ID
ERR_FBS_DO_INVALIDINDEX

Error name
FBS_DO_INVALIDINDEX

1454 www.honeywell.com
 3 ERROR CODES

Cause
The index of the DO Block Pin added exceeds the number of DO parameters configured.

Solution
Increase the number of outputs configured or remove the pin.

3.58.12 12612
Maximum event number exceeded.

Error ID
ERR_FBS_MAXEVENTSEXCEEDED

Error name
FBS_MAXEVENTSEXCEEDED

Cause
Error occurs when user wants to configure more than the amount of supported events allowed.

Solution
None.

3.58.13 12613
The Base IP Address is invalid. Base IP Address must be class A, B, or C, with a multiple of 10 in the lowest
octet.

Error ID
ERR_CB_INVALIDBASEIP

Error name
CB_INVALIDBASEIP

Cause
The Base IP contain a multiple of 10 in the last octet

Solution
Try reconfiguring the Base IP if the automatic correction is inadequate.

3.58.14 12614
The Subnet Mask is invalid. Subnet Mask must consist of all 1's followed by all 0's, with at least two 0's in the
lower bits.

Error ID
ERR_CB_INVALIDSUBNETMASK

1455
3 ERROR CODES

Error name
CB_INVALIDSUBNETMASK

Cause
The Subnet Mask is not in the proper format.

Solution
Try reconfiguring the Subnet Mask if the automatic correction is inadequate.

3.58.15 12615
The Default Gateway is invalid. Default Gateway must satisfy this equation (DG & SN) == (BIP & SN) if DG !
= 0.0.0.0 (where DG = Default Gateway, SN = Subnet Mask, BIP = Base IP Address).

Error ID
ERR_CB_INVALIDDEFAULTGATEWAY

Error name
CB_INVALIDDEFAULTGATEWAY

Cause
The Default Gateway was not configured correctly.

Solution
Try reconfiguring the Default Gateway if the automatic correction is inadequate.

3.58.16 12616
The Default Gateway entered is valid. Generally, the Default Gateway should be left empty (0.0.0.0) for
Experion Process Knowledge System. However, in an inter-cluster peer to peer setup, the Default Gateway
should contain a valid entry.

Error ID
ERR_CB_DEFAULTGATEWAY_WARNING

Error name
CB_DEFAULTGATEWAY_WARNING

Cause
The Default Gateway entered is legal but normally it must be left empty.

Attention
However, in an inter-cluster peer to peer setup, the Default Gateway must contain a valid entry.

Solution
Change the Default Gateway entry back to 0.0.0.0. However, in an inter-cluster peer to peer setup, ensure that
the Default Gateway contains a valid entry.

1456 www.honeywell.com
 3 ERROR CODES

3.58.17 12617
The Base IP Address cannot be updated since strategies are loaded. Unload strategies, and re-enter all network
preferences.

Error ID
ERR_CB_CANTCHANGEBIPWHENLOADED

Error name
CB_CANTCHANGEBIPWHENLOADED

Cause
The Base IP cannot be updated to the embedded nodes when any strategies are loaded.

Solution
None. Unload strategies, and re-enter all network preferences.

3.58.18 12618
The Base IP Address cannot be propagated to the node. An error occurred in checking out or updating this node
or one of its descendants.

Error ID
ERR_CB_CANTCHANGEBIPINNODE

Error name
CB_CANTCHANGEBIPINNODE

Cause
Inability to Lock a strategy for editing (possibly from QVCS) prevented the Base IP update to the embedded
node or its descendants. Network preferences are reverted.

Solution
Check out all hardware related strategies and retry.

3.58.19 12619
The index of a PO block pin exceeds the number of configured outputs.

Error ID
ERR_FBS_PO_INVALIDINDEX

Error name
FBS_PO_INVALIDINDEX

Cause
The index of the PO block pin added exceeds the number of outputs configured.

1457
3 ERROR CODES

Solution
Increase the number of outputs configured, or remove the pin

3.58.20 12620
Could not open the Engineering Tools Error Log

Error ID
ERR_CB_VIEWLOG

Error name
CB_VIEWLOG

Cause
Could not open the file ErrLog_x.txt

Solution
Manually navigate to the Error Log via:
Start > Programs > Honeywell Experion PKS > Engineering Tools > Error Logs

3.58.21 12621
Select new parent and/or target control(s) to proceed validation

Error ID
ERR_CB_CP_NONEWPARENTANDTARGETCONTROLSELECTED

Error name
CB_CP_NONEWPARENTANDTARGETCONTROLSELECTED

Cause
User has not selected the new parent and target control(s) to proceed validation operation

Solution
Select new parent and target control(s) to proceed validation operation

3.58.22 12622
None.

Error ID
ERR_CB_CP_NOCONTROLSELECTED

Error name
CB_CP_NOCONTROLSELECTED

Cause
User has not selected control(s) to perform Change Parent or Replace Device operation

1458 www.honeywell.com
 3 ERROR CODES

Solution
Select control(s) to perform Change Parent or Replace Device operation

3.58.23 12623
Validation failed for all selected controls. Change Parent or Replace Device operation cannot be performed.

Error ID
ERR_CB_CP_VALIDATION_FAILED

Error name
CB_CP_VALIDATION_FAILED

Cause
Validation failed for all selected controls.

Solution
Go to the previous page and select different controls for validation

3.58.24 12624
Current parent cannot be selected as new parent. Select different control as new parent

Error ID
ERR_CB_CP_CURRENT_PARENT_SELECTED

Error name
CB_CP_CURRENT_PARENT_SELECTED

Cause
User has selected current parent as a new parent for validation operation

Solution
Select different control as new parent

3.58.25 12625
The Unlike Device Replacement operation cannot be performed on Fieldbus devices derived from different
device type. Select Fieldbus devices of same device type

Error ID
ERR_CB_UDR_DIFF_TEMPLATE

Error name
CB_UDR_DIFF_TEMPLATE

Cause
User has selected multiple Fieldbus devices from the project tree that are not derived from same device type

1459
3 ERROR CODES

Solution
Select devices derived from same device type

3.58.26 12626
Select new device type to proceed with validation

Error ID
ERR_CB_UDR_NONEWDEVICETYPESELECTED

Error name
CB_UDR_NONEWDEVICETYPESELECTED

Cause
User has not selected the new device to proceed with the validation operation

Solution
Select device type to proceed with the validation operation

3.58.27 12627
The DATA Block is configured. To delete the DATA Block, open the chart and select 'DATA Block->Delete
DATA Block.' from the Edit menu

Error ID
ERR_CB_DATABLK_DELETE

Error name
CB_DATABLK_DELETE

Cause
User cleared the value of the DATABLOCK parameter on an SCM/RCM which had a DATA Block defined

Solution
To delete the DATA Block the user must select the SCM/RCM's chart and navigate to the menu item Edit-
>DATA Block->Delete DATA Block.

3.58.28 12628
The DATA Block is configured. To change the DATA Block Type, open the chart and select 'DATA Block-
>Change Parent for DATA Block.' from the Edit menu

Error ID
ERR_CB_DATABLK_CHGPARENT

Error name
CB_DATABLK_CHGPARENT

1460 www.honeywell.com
 3 ERROR CODES

Cause
User changed the value of the DATABLOCK parameter on an SCM/RCM which had a DATA Block defined

Solution
To change the DATA Block Type the user must select the SCM/RCM's chart and navigate to the menu item
Edit->DATA Block->Change Parent for DATA Block.

3.58.29 12629
A block with the name 'DATA' exists, resolve the name conflict before selecting a DATA Block Type

Error ID
ERR_CB_DATABLK_DUPNAME

Error name
CB_DATABLK_DUPNAME

Cause
User selected a DATA Block Type, the block could not be created because the SCM/RCM already contains a
block with the name 'DATA

Solution
Delete or change the name of the block which is already named 'DATA' to resolve the name conflict. Select a
DATA Block Type once name conflict has been resolved.

3.58.30 12630
Unable to create the DATA Block.

Error ID
ERR_CB_DATABLK_CREATE

Error name
CB_DATABLK_CREATE

Cause
Unable to create DATA Block. One of the following failed: Create Block, Set Name to 'DATA', Set Attribute
DATABLK, Hide DATA in chart and tree.

Solution
Check error log to find the cause of the failure

3.58.31 12631
Invalid Block Type. Select a PHASE Block Type currently defined in the ERDB

Error ID
ERR_CB_DATABLK_INVALIDTYPE

1461
3 ERROR CODES

Error name
CB_DATABLK_INVALIDTYPE

Cause
The string entered is not a template or the template is not of Type PHASE

Solution
Select a PHASE Block Type currently defined in the ERDB

3.58.32 12632
Alias instance cannot be updated on loaded strategy. Modify on project side and reload Alias table

Error ID
ERR_CB_CANT_CHANGE_LOADED_ALIASREF

Error name
CB_CANT_CHANGE_LOADED_ALIASREF

Cause
Attempt to modify an alias table instance value on the loaded (monitor) side.

Solution
Modify the project sid value and reload the alias table

3.58.33 12633
Select at least one device from the Available Controls list for replacement

Error ID
ERR_CB_UDR_NODEVICESELECTED

Error name
CB_UDR_NODEVICESELECTED

Cause
User has not selected a device to replace from the available list

Solution
Select a device from the available list for replacement

3.58.34 12634
Could not open the Unlike Template Replacement Error Log for reading. This file may not yet exist.

Error ID
ERR_CB_VIEWUTRLOG

1462 www.honeywell.com
 3 ERROR CODES

Error name
CB_VIEWUTRLOG

Cause
Could not open the file FF_UTR_Log_x.txt

Solution
Manually navigate to the Error Log via:
Start > Programs > Honeywell Experion PKS > Engineering Tools > Error Logs

3.58.35 12659
This error occurs when the user is trying to set the value of any target for which previous target value is empty.

Error ID
ERR_CB_PREV_TARGET_EMPTY

Error name
None.

Cause
When the user selects the value of target whose previous target is empty.

Solution
The user has to select the value of previous target.

3.58.36 12672
Select a template from the template column for the un-commissioned device for the row.

Error ID
ERR_UCD_SELECTTEMPLATE

Error name
UCD_SELECTTEMPLATE

Cause
This error occurs when you select 'Uncommission device without pre-conf' without selecting the template from
the UCD grid.

Solution
Select a template name from the UCD grid.

3.58.37 12673
The Phase type may not be modified from the Recipe builder because the type has been used as an SCM data
block. Recipe builder does not allow changes that can affect an SCM.

1463
3 ERROR CODES

Error ID
ERR_CB_READ_ONLY_PHASE_TEMPLATE

Error name
ERR_CL_READ_ONLY_PHASE_TEMPLATE

Cause
A template cannot be edited if the type is used as an SCM data block. Recipe builder does not allow changes
that can affect an SCM.

Solution
The template may be modified from Control builder.

3.58.38 12674
CEEs are not designated for the assignment in Control Builder. To designate CEEs select Tools > Recipe
Builder Operation Permissions in Control Builder.

Error ID
ERR_CB_NO_CONFIGURED_CEEs

Error name
ERR_CB_NO_CONFIGURED_CEEs

Cause
Trying to invoke an assignment dialog in Recipe builder without selecting any CEE's in the Control builder.

Solution
None

3.58.39 12675
Blob information for the definition parameter exceeds the size limit.

Error ID
ERR_CB_MAPCDPDLL_BLOBSIZEEXCEEDLIMIT

Error name
ERR_CB_MAPCDPDLL_BLOBSIZEEXCEEDLIMIT

Cause
The size calculated for the blob is not supported as it is too big.

Solution
Reduce the size of the blob by deleting CDP information, that is, remove CDPs, use smaller data types, and so
on.

1464 www.honeywell.com
 3 ERROR CODES

3.58.40 12676
The total size of the Checkpoint data for this block exceeds the supported size.

Error ID
ERR_CB_MAPCDPDLL_OCDSIZEEXCEEDLIMIT

Error name
ERR_CB_MAPCDPDLL_OCDSIZEEXCEEDLIMIT

Cause
The size calculated for the OCD buffer is not supported as it is too big.

Solution
Reduce the size of the OCD buffer by deleting CDP information, that is, remove CDPs, use smaller data types,
and so on.

3.58.41 12677
The parameter type is not supported.

Error ID
ERR_CB_MAPCDPDLL_INVALIDPARAMTYPE

Error name
ERR_CB_MAPCDPDLL_INVALIDPARAMTYPE

Cause
Parameter type is not supported.

Solution
Remove the CDP with the unsupported type.

3.58.42 12678
The parameter definition is incomplete.

Error ID
ERR_CB_MAPCDPDLL_INVALIDPARAM

Error name
ERR_CB_MAPCDPDLL_INVALIDPARAM

Cause
Parameter definition in the DEF file is missing the required fields. That is, the Parameter Name and the
Parameter Code. This is a serious problem.

1465
3 ERROR CODES

Solution
Try saving the block information from the PDE again. If the problem persists, contact Honeywell TAC.

3.58.43 12679
The Map block type is contained by a Unit class or Unit instance. Also, you cannot delete references or modify
the name and/or type.

Error ID
ERR_CB_MAP_BLK_SAVE

Error name
MAP_CDB_SAVE

Cause
You must have performed the following:
• Deleted Function/BasicBlock/Parameter name
• Changed Function/BasicBlock/Parameter names and/or Function/BasicBlock/Parameter type(s).

Solution
Only save operation is allowed.

3.58.44 12680
Unit configuration exceeded the maximum limit allowed.

Error ID
ERR_CB_MR_MAX_UNITCLASS

Error name
ERR_CB_MR_MAX_UNITCLASS

Cause
The value for the parameter is greater than the maximum value defined.

Solution
Remove the configured Unit class from the Master recipe unit configuration.

3.58.45 12681
Failed to create the validate block and the references dialog box, hence the validation operation is canceled.

Error ID
ERR_CB_VALIDATE_CREATEDLG_FAILED

Error name
ERR_CB_VALIDATE_CREATEDLG_FAILED

1466 www.honeywell.com
 3 ERROR CODES

Cause
Running out of system resources.

Solution
Shutdown the system and restart it.

3.58.46 12682
The selected control is not strategy type, and hence validation of tag and references is not allowed.

Error ID
ERR_CB_VALIDATE_INVALID_CONTROL

Error name
ERR_CB_VALIDATE_INVALID_CONTROL

Cause
Selected control is not an instance of a block type template.

Solution
Select instantiated strategy from the Project view or Monitoring view.

3.58.47 12683
An unanticipated condition has occurred when the validation operation is performed and the validation is
stopped. Refer to the error log for more details.

Error ID
ERR_CB_VALIDATE_UNKNOWN_ERR

Error name
ERR_CB_VALIDATE_UNKNOWN_ERR

Cause
Unknown

Solution
Select instantiated strategy of Project view or Monitoring view.

3.58.48 12684
Data block is not configured for the project recipe.

Error ID
ERR_CB_DATABLOCK_NOTCONFIGURED

Error name
ERR_CB_DATABLOCK_NOTCONFIGURED

1467
3 ERROR CODES

Cause
The data block is not configured for the project recipe, which is being dragged into to another recipe.

Solution
Configure the data block for the project recipe module.

3.58.49 12685
The Phase type may not be Checked-in/Checked-out from the Recipe Builder because the type has been used as
an SCM DATA block. Recipe Builder does not allow check in/check-out that can affect an SCM.

Error ID
ERR_RB_PHASE_CHECKIN_CHECKOUT_ERROR

Error name
ERR_CB_PHASE_CHECKIN_RBERROR

Cause
A template cannot be checked-in if the type is used as an SCM data block. Recipe Builder does not allow
changes that can affect an SCM.

Solution
Check in the template from the Control Builder.

3.58.50 12686
Migration/FreezeAndSwitchOver of the controller is not allowed due to existence of the running Control
Recipes.

Error ID
ERR_CB_CONTROL_RECIPES_EXIST

Error name
ERR_CB_CONTROL_RECIPES_EXIST

Cause
The Activity OPM option of the CEE is configured as DISABLED (ACTCRMIGOPT = DISABLED). In
addition, you are trying to perform controller OPM when the Control recipes are running in the CEE.

Solution
1. Cancel the controller OPM and wait until all the Control recipes complete their execution and then perform
the Controller OPM.
2. Change the configuration of ACTCRMIGOPT parameter of the CEE to 'FORCEREMOVE' and perform the
Controller OPM. This option forces the CEE to remove all the running Control recipes.
After the Controller OPM operation is performed, all the running Control Recipes exist in the new primary.

3.58.51 12687
The selected UCM/Unit Class has no Map blocks. Please select another UCM/Unit Class.

1468 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_CB_CP_NO_MAPBLKS

Error name
CB_CP_NO_MAPBLKS

Cause
The UCM/Unit class is selected that does not have a Map block for Change Parent by Function operation.

Solution
Select a UCM/Unit class that has a Map block to proceed with Change Parent by Function operation.

3.58.52 12688
The selected UCM/Unit class has no Map blocks with functions defined. Please select another UCM/UnitClass.

Error ID
ERR_CB_CP_NO_FUNCTIONS

Error name
CB_CP_NO_FUNCTIONS

Cause
The UCM/Unit class is selected that does not have a Map block with a valid function for Change Parent by
Function operation.

Solution
Select a UCM/Unit class that has a Map block with a valid function to proceed with Change Parent by
Function operation.

3.58.53 12689
The block selected for Change Parent by Function is not of UCM or Phase type.

Error ID
ERR_CB_CP_TYPE_NOT_UCM_OR_PHASE

Error name
CB_CP_TYPE_NOT_UCM_OR_PHASE

Cause
A block is selected which is not of UCM or Phase type for the Change Parent by Function operation.

Solution
Select a block which is of UCM or Phase type for Change Parent by Function operation.

1469
3 ERROR CODES

3.58.54 12690
The selected function has no instances. Select another function.

Error ID
ERR_CB_CP_NOMAPFUNCTIONINSTANCE

Error name
CB_CP_NOMAPFUNCTIONINSTANCE

Cause
A function in Change Parent by Function wizard is selected that has no instances.

Solution
Select another function for Change Parent by Function operation.

3.58.55 12691
The selected UCM/Unit class has no map function instances. Select another UCM/Unit class.

Error ID
ERR_CB_CP_UCM_HAS_NOMAPBLKINSTANCE

Error name
CB_CP_UCM_HAS_NOMAPBLKINSTANCE

Cause
A UCM/ Unit Class is selected whose map functions have no instances for Change Parent by Function
operation.

Solution
Select a UCM/Unit class whose map functions have instances for Change Parent by Function operation.

3.58.56 12692
The selected operation for the control is not supported in the Recipe Builder because it may cause an
unsupported operation on the control. Recipe Builder does not allow any operation on a control that may lead to
modifying instances/ user-defined templates of UCMs, Unit classes, SCMs, Control Modules with basic blocks
or Control Modules that are assigned to a CEE. The selected control is either one of these types or contains one
or more of these types further down the containment/ derivation hierarchy.

Error ID
ERR_CB_DISALLOWED_IN_BLDR

Error name
CB_DISALLOWED_IN_BLDR

1470 www.honeywell.com
 3 ERROR CODES

Cause
An operation is selected for a control that is not supported in the Recipe Builder.
Recipe Builder does not allow any operation on a control that may lead to modifying instances/ user-defined
templates of UCMs, Unit classes, SCMs, Control Modules with basic blocks or Control Modules that are
assigned to a CEE.
The selected control is either of one of these types or may contain one or more of these types further down the
containment (in case of Copy, Delete, Make Template and Instantiate operations)/ derivation (in case of
Checkin/ Checkout operations) hierarchy.

Solution
This operation can be performed from the Control Builder.

3.58.57 12693
You have chosen to reload an active Fieldbus Interface Module.

Error ID
ERR_CB_FIMRUNNING

Error name
CB_FIMRUNNING

Cause
This error occurs in the shutdown of the Fieldbus links and a loss of connection to all devices on the links.

Solution
Ensure all Fieldbus blocks are placed out-of-service before continuing.

3.58.58 12694
Device Capability Level does not match

Error ID
ERR_UCD_CAPABILITYMISMATCH

Error name
UCD_CAPABILITYMISMATCH

Cause
The selected device in the Project and Monitoring views for device matching does not consists of same
capability level.

Solution
Select/import the device with matching Capability Level

3.58.59 12747
Cannot perform “Unassign” operation.

1471
3 ERROR CODES

Error ID
ERR_CB_UNASSGNFBERROR

Error name
CB_UNASSGNFBERROR

Cause
Performed “Unassign” operation on a loaded channel block(s).

Solution
Delete the channel block(s) from the Monitoring view and then perform “Unassign” operation.

1472 www.honeywell.com
 3 ERROR CODES

3.59 Codes 12699 to 12728

Related topics
“12699” on page 1473
“12703” on page 1474
“12704” on page 1474
“12705” on page 1474
“12706” on page 1475
“12707” on page 1475
“12708” on page 1475
“12709” on page 1476
“12710” on page 1476
“12711” on page 1476
“12712” on page 1477
“12713” on page 1477
“12714” on page 1477
“12715” on page 1478
“12716” on page 1478
“12717” on page 1478
“12718” on page 1479
“12719” on page 1479
“12720” on page 1479
“12721” on page 1480
“12722” on page 1480
“12723” on page 1480
“12724” on page 1481
“12725” on page 1481
“12726” on page 1481
“12727” on page 1482
“12728” on page 1482

3.59.1 12699
Enter a valid tag name.

Error ID
ERR_CB_OPEN_INVALIDTAG

Error name
CB_OPEN_INVALIDTAG

Cause
You have entered the name of an object that does not exist (invalid).

Solution
Ensure that the entered name exists.

1473
3 ERROR CODES

3.59.2 12703
Failed to create the pulldown menu for the List View Maintenance Settings button.

Error ID
ERR_CB_LISTVIEW_MAINBUTTONMENU_CREATE_FAILED

Error name
CB_LISTVIEW_MAINBUTTONMENU_CREATE_FAILED

Cause
Running out of system resources.

Solution
Shutdown the Control Builder and then restart the machine.

3.59.3 12704
Failure while selecting settings item from a Maintenance selection list.

Error ID
ERR_CB_LISTVIEW_STGSLIST_ITEM_SELECTION_FAILED

Error name
CB_LISTVIEW_STGSLIST_ITEM_SELECTION_FAILED

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.4 12705
Failure while selecting a column from Maintenance selection list.

Error ID
ERR_CB_LISTVIEW_STGSLIST_COLUMN_SELECTION_FAILED

Error name
CB_LISTVIEW_STGSLIST_COLUMN_SELECTION_FAILED

Cause
Unknown.

Solution
Restart the Control Builder.

1474 www.honeywell.com
 3 ERROR CODES

3.59.5 12706
Same window applies to one or more window controls in Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_MAINSTGS_NONUNIQUE_WINDOW_CONTROLS

Error name
CB_LISTVIEW_MAINSTGS_NONUNIQUE_WINDOW_CONTROLS

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.6 12707
Could not find control for expected Edit option in Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_MAINSTGS_EDIT_CONTROL_NOT_FOUND

Error name
CB_LISTVIEW_MAINSTGS_EDIT_CONTROL_NOT_FOUND

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.7 12708
Found an illegal control associated with the Edit option in Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_MAINSTGS_EDIT_CONTROL_ILLEGAL

Error name
CB_LISTVIEW_MAINSTGS_EDIT_CONTROL_ILLEGAL

Cause
Unknown.

Solution
Restart the Control Builder.

1475
3 ERROR CODES

3.59.8 12709
Found an illegal control associated with an option in Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_MAINSTGS_BUTTON_CONTROL_ILLEGAL

Error name
CB_LISTVIEW_MAINSTGS_BUTTON_CONTROL_ILLEGAL

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.9 12710
Encountered an invalid settings name item when populating the list associated with Maintenance Settings dialog
box.

Error ID
ERR_CB_LISTVIEW_MAINSTGS_ITEM_ILLEGAL

Error name
CB_LISTVIEW_MAINSTGS_ITEM_ILLEGAL

Cause
ERDB invalid.

Solution
None.

3.59.10 12711
Encountered an invalid list dialog control associated with Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_STGSLIST_LIST_SELECTION_FAILED

Error name
CB_LISTVIEW_STGSLIST_LIST_SELECTION_FAILED

Cause
Unknown.

1476 www.honeywell.com
 3 ERROR CODES

Solution
Restart the Control Builder.

3.59.11 12712
Encountered illogical compare on original user and settings names associated with Maintenance Settings
rename dialog box.

Error ID
ERR_CB_LISTVIEW_INCONSISTENT_USER_AND_SETTINGS_NAME

Error name
CB_LISTVIEW_INCONSISTENT_USER_AND_SETTINGS_NAME

Cause
ERDB invalid.

Solution
None.

3.59.12 12713
Encountered an invalid context menu selection in Maintenance Settings dialog box.

Error ID
ERR_CB_LISTVIEW_STGSLIST_CONTEXTMENU_SELECTION_FAILED

Error name
CB_LISTVIEW_STGSLIST_CONTEXTMENU_SELECTION_FAILED

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.13 12714
Invalid Header/Footer configuration found on line of file.

Error ID
ERR_CB_INVALID_HEADER_FILE

Error name
CB_INVALID_HEADER_FILE

1477
3 ERROR CODES

Cause
A syntax error was found in the specified header/footer configuration file. This could be caused by a manually
edited file.

Solution
Remove the specified line in the file or correct the syntax error.

3.59.14 12715
List View interface error with ODP.

Error ID
ERR_CB_LISTVIEW_INTERNAL_ERROR

Error name
CB_LISTVIEW_INTERNAL_ERROR

Cause
The online values must be read as values from controllers.

Solution
• Close the Control Builder and then reopen the Control Builder.
• Ensure that the Control Builder is connected to server.
• Verify the Browser error logs.

3.59.15 12716
Communication timeout with Browser.

Error ID
ERR_CB_TIMEOUT_ERROR

Error name
CB_TIMEOUT_ERROR

Cause
The communication between Control Builder and the Browser has timed out.

Solution
Retry the operation.

3.59.16 12717
Search operation cancelled.

Error ID
ERR_CB_SEARCH_CANCELLED

1478 www.honeywell.com
 3 ERROR CODES

Error name
CB_SEARCH_CANCELLED

Cause
Cancellation of the List View search operation.

Solution
None.

3.59.17 12718
Connection to Browser service is broken. Check browser log for additional details.

Error ID
ERR_CB_BROWSER_CONN_BROKEN

Error name
CB_BROWSER_CONN_BROKEN

Cause
Connection to Browser service is broken. Ensure to stop Browser services.

Solution
Restart the Browser services and try again.

3.59.18 12719
List View encountered an unexpected opened connection to Browser.

Error ID
ERR_CB_LISTVIEW_BROWSER_CONN_ALREADY_EXISTS

Error name
CB_LISTVIEW_BROWSER_CONN_ALREADY_EXISTS

Cause
List View internal error in use of Browser connection.

Solution
Close the Control Builder. Before restarting the Control Builder, wait for 30 seconds until the Browser
connection disconnects.

3.59.19 12720
List View encountered an undefined Browser connection.

Error ID
ERR_CB_LISTVIEW_UNDEFINED_BROWSER_CONN

1479
3 ERROR CODES

Error name
CB_LISTVIEW_UNDEFINED_BROWSER_CONN

Cause
List View internal error in use of Browser connection.

Solution
Restart the Control Builder.

3.59.20 12721
List View search operation cancelled.

Error ID
ERR_CB_LISTVIEW_CANCEL

Error name
CB_LISTVIEW_CANCEL

Cause
User action.

Solution
None.

3.59.21 12722
List View encountered an unexpected worker thread.

Error ID
ERR_CB_LISTVIEW_UNEXPECTED_WORKER_THREAD

Error name
CB_LISTVIEW_UNEXPECTED_WORKER_THREAD

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.22 12723
List View encountered problem in closing a worker thread, see Error Logs.

Error ID
ERR_CB_LISTVIEW_PROBLEM_ON_WRKTHREAD_CLOSE

1480 www.honeywell.com
 3 ERROR CODES

Error name
CB_LISTVIEW_PROBLEM_ON_WRKTHREAD_CLOSE

Cause
Unknown.

Solution
Restart the Control Builder.

3.59.23 12724

Error ID
ERR_CB_PARMOUTOFRANGE

Error name
CB_PARMOUTOFRANGE

Cause
Entered Order in CM the value is not within the range 1 to 32767.

Solution
Enter Order in CM value within the range 1 to 32767.

3.59.24 12725
The Header/Footer configuration file contains a reference to a bitmap file. This file cannot be found on the
system.

Error ID
ERR_CB_MISSING_HEADER_BITMAP

Error name
CB_MISSING_HEADER_BITMAP

Cause
Exported Header/Footer configuration file was copied to a machine that does not contain the referenced bitmap
file.

Solution
Install the referenced bitmap file in the correct location on the client machine before printing with this Header/
Footer.

3.59.25 12726
Control Builder server connection issues. Check the server logs for more information.

Error ID
ERR_CB_LV_SERVERNAME_FAILED_TO_RESOLVE

1481
3 ERROR CODES

Error name
CB_LV_SERVERNAME_FAILED_TO_RESOLVE

Cause
Unknown.

Solution
Run the query again.

3.59.26 12727
Cannot perform Unassign operation. First delete the loaded channel block(s) from the monitoring side.

Error ID
ERR_CB_UNASSGNFBERROR

Error name
CB_UNASSGNFBERROR

Cause
Performed Unassign operation on a loaded channel block(s).

Solution
Delete the channel block(s) from the monitoring side first and then perform Unassign operation.

3.59.27 12728
The file selected for opening does not match with the active list view instance.

Error ID
ERR_CB_LISTVIEW_OPENFILE_ERROR

Error name
CB_LISTVIEW_OPENFILE_ERROR

Cause
The file selected for opening does not match with the active list view instance.

Solution
None.

1482 www.honeywell.com
 3 ERROR CODES

3.60 Codes 14101 to 14199

Related topics
“14101” on page 1485
“14102” on page 1485
“14103” on page 1485
“14104” on page 1486
“14105” on page 1486
“14106” on page 1486
“14107” on page 1487
“14108” on page 1487
“14109” on page 1487
“14110” on page 1488
“14111” on page 1488
“14112” on page 1488
“14113” on page 1489
“14114” on page 1489
“14115” on page 1489
“14116” on page 1490
“14117” on page 1490
“14118” on page 1490
“14119” on page 1491
“14120” on page 1491
“14121” on page 1491
“14122” on page 1492
“14123” on page 1492
“14124” on page 1492
“14125” on page 1493
“14126” on page 1493
“14127” on page 1493
“14128” on page 1494
“14129” on page 1494
“14130” on page 1494
“14131” on page 1495
“14132” on page 1495
“14133” on page 1495
“14134” on page 1496
“14135” on page 1496
“14136” on page 1496
“14137” on page 1497
“14138” on page 1497
“14139” on page 1497
“14140” on page 1498
“14141” on page 1498
“14142” on page 1498
“14143” on page 1499
“14144” on page 1499

1483
3 ERROR CODES

“14145” on page 1499

“14146” on page 1500
“14147” on page 1500
“14148” on page 1500
“14149” on page 1501
“14150” on page 1501
“14151” on page 1501
“14152” on page 1502
“14153” on page 1502
“14154” on page 1502
“14155” on page 1503
“14156” on page 1503
“14157” on page 1503
“14158” on page 1504
“14159” on page 1504
“14160” on page 1504
“14161” on page 1505
“14162” on page 1505
“14163” on page 1505
“14164” on page 1506
“14165” on page 1506
“14166” on page 1506
“14167” on page 1507
“14168” on page 1507
“14173” on page 1507
“14174” on page 1508
“14175” on page 1508
“14176” on page 1508
“14177” on page 1509
“14178” on page 1509
“14179” on page 1509
“14180” on page 1510
“14181” on page 1510
“14182” on page 1510
“14183” on page 1511
“14184” on page 1511
“14185” on page 1511
“14186” on page 1512
“14187” on page 1512
“14188” on page 1512
“14189” on page 1513
“14190” on page 1513
“14191” on page 1513
“14192” on page 1514
“14193” on page 1514
“14194” on page 1514
“14195” on page 1515
“14196” on page 1515

1484 www.honeywell.com
 3 ERROR CODES

“14197” on page 1515

“14198” on page 1516
“14199” on page 1516

3.60.1 14101
Import-Export tool out of memory.

Error ID
ERR_IXP_OUTOFMEMORY

Error name
IXP_OUTOFMEMORY

Cause
None.

Solution
None.

3.60.2 14102
An unexpected error was encountered.

Error ID
ERR_IXP_UNEXPECTED

Error name
IXP_UNEXPECTED

Cause
None.

Solution
None.

3.60.3 14103
Invalid life cycle state.

Error ID
ERR_IXP_INVALID_LIFECYCLE_STATE

Error name
IXP_INVALID_LIFECYCLE_STATE

Cause
None.

1485
3 ERROR CODES

Solution
None.

3.60.4 14104
Illegal connection

Error ID
ERR_IXP_ILLEGAL_CONNECTION

Error name
IXP_ILLEGAL_CONNECTION

Cause
None.

Solution
None.

3.60.5 14105
Invalid Symbol Attribute Type.

Error ID
ERR_IXP_INVSYMATTR

Error name
IXP_INVSYMATTR

Cause
None.

Solution
None.

3.60.6 14106
Invalid Connection Form.

Error ID
ERR_IXP_INVCONNFORM

Error name
IXP_INVCONNFORM

Cause
None.

1486 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.7 14107
Required section is missing from the configuration file.

Error ID
ERR_IXP_REQSECMISSING

Error name
IXP_REQSECMISSING

Cause
None.

Solution
None.

3.60.8 14108
Error writing section to configuration file.

Error ID
ERR_IXP_WRITESECTION

Error name
IXP_WRITESECTION

Cause
None.

Solution
None.

3.60.9 14109
An unspecified error occurred.

Error ID
ERR_IXP_FILEGENERIC

Error name
IXP_FILEGENERIC

Cause
None.

1487
3 ERROR CODES

Solution
None.

3.60.10 14110
WARNING - The file could not be located.

Error ID
ERR_IXP_FILENOTFOUND

Error name
IXP_FILENOTFOUND

Cause
None.

Solution
None.

3.60.11 14111
All or part of the path is invalid.

Error ID
ERR_IXP_FILEBADPATH

Error name
IXP_FILEBADPATH

Cause
None.

Solution
None.

3.60.12 14112
The permitted number of open files was exceeded.

Error ID
ERR_IXP_FILETOOMANYOPEN

Error name
IXP_FILETOOMANYOPEN

Cause
None.

1488 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.13 14113
The file could not be accessed.

Error ID
ERR_IXP_FILENOACCESS

Error name
IXP_FILENOACCESS

Cause
None.

Solution
None.

3.60.14 14114
There was an attempt to use an invalid file handle.

Error ID
ERR_IXP_FILEINVHANDLE

Error name
IXP_FILEINVHANDLE

Cause
None.

Solution
None.

3.60.15 14115
The current working directory cannot be removed.

Error ID
ERR_IXP_FILECANTREMDIR

Error name
IXP_FILECANTREMDIR

Cause
None.

1489
3 ERROR CODES

Solution
None.

3.60.16 14116
There are no more directory entries.

Error ID
ERR_IXP_FILEDIRFULL

Error name
IXP_FILEDIRFULL

Cause
None.

Solution
None.

3.60.17 14117
There was an error trying to set the file pointer.

Error ID
ERR_IXP_FILESEEKERR

Error name
IXP_FILESEEKERR

Cause
None.

Solution
None.

3.60.18 14118
There was a hardware error.

Error ID
ERR_IXP_FILEHARDIO

Error name
IXP_FILEHARDIO

Cause
None.

1490 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.19 14119
The SHARE.EXE was not loaded, or a shared region was locked.

Error ID
ERR_IXP_FILESHARE

Error name
IXP_FILESHARE

Cause
None.

Solution
None.

3.60.20 14120
There was an attempt to lock a region that was already locked.

Error ID
ERR_IXP_FILELOCKED

Error name
IXP_FILELOCKED

Cause
None.

Solution
None.

3.60.21 14121
The disk is full.

Error ID
ERR_IXP_FILEDISKFUL

Error name
IXP_FILEDISKFULL

Cause
None.

1491
3 ERROR CODES

Solution
None.

3.60.22 14122
The end of file was reached.

Error ID
ERR_IXP_FILEEOF

Error name
IXP_FILEEOF

Cause
None.

Solution
None.

3.60.23 14123
Block Export configuration error.

Error ID
ERR_IXP_EXPCONFIG

Error name
IXP_EXPCONFIG

Cause
None.

Solution
None.

3.60.24 14124
Error adding substituted name (template) to ERDB

Error ID
ERR_IXP_ADDSUBSTNAME

Error name
IXP_ADDSUBSTNAME

Cause
None.

1492 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.25 14125
Error getting substituted name list from ERDB.

Error ID
ERR_IXP_GETSUBSTNAME

Error name
IXP_GETSUBSTNAME

Cause
None.

Solution
None.

3.60.26 14126
Substituted name list read from ERDB is empty.

Error ID
ERR_IXP_EMPTYSUBSTNAMELST

Error name
IXP_EMPTYSUBSTNAMELST

Cause
None.

Solution
None.

3.60.27 14127
The substituted name already exists in ERDB for a different template.

Error ID
ERR_IXP_SNDIFFTEMPL

Error name
IXP_SNDIFFTEMPL

Cause
None.

1493
3 ERROR CODES

Solution
None.

3.60.28 14128
Unable to get list to delete all substituted names from ERDB.

Error ID
ERR_IXP_DELALLSNGETLIST

Error name
IXP_DELALLSNGETLIST

Cause
None.

Solution
None.

3.60.29 14129
Unable to delete the substituted name for the given template.

Error ID
ERR_IXP_DELSUBSTNAME

Error name
IXP_DELSUBSTNAME

Cause
None.

Solution
None.

3.60.30 14130
Unable to load substituted name table from file

Error ID
ERR_IXP_LOADSNTABLE

Error name
IXP_LOADSNTABLE

Cause
None.

1494 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.31 14131
Substitute Name List file is incorrect version or has invalid format.

Error ID
ERR_IXP_SNLFILEVERSION

Error name
IXP_SNLFILEVERSION

Cause
None.

Solution
None.

3.60.32 14132
Substitute name entry for given item is not added.

Error ID
ERR_IXP_SNLNOTADDED

Error name
IXP_SNLNOTADDED

Cause
None.

Solution
None.

3.60.33 14133
An error was encountered while trying to write the Substituted Name file - file write aborted.

Error ID
ERR_IXP_SAVESNTABLE

Error name
IXP_SAVESNTABLE

Cause
None.

1495
3 ERROR CODES

Solution
None.

3.60.34 14134
Substitute Name List is empty -- nothing to delete.

Error ID
ERR_IXP_SNLISTEMPTY

Error name
IXP_SNLISTEMPTY

Cause
None.

Solution
None.

3.60.35 14135
Configure connection error for named connection.

Error ID
ERR_IXP_CONFIGCONN

Error name
IXP_CONFIGCONN

Cause
None.

Solution
None.

3.60.36 14136
Invalid connection form for the named connection.

Error ID
ERR_IXP_CONNFORM

Error name
IXP_CONNFORM

Cause
None.

1496 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.37 14137
Invalid connection graphical side indicator for named connection.

Error ID
ERR_IXP_INVGRSIDE

Error name
IXP_INVGRSIDE

Cause
None.

Solution
None.

3.60.38 14138
Error adding symbol attribute - Parameter name, type name.

Error ID
ERR_IXP_CONFSYMATTR

Error name
IXP_CONFSYMATTR

Cause
None.

Solution
None.

3.60.39 14139
Error looking up symbol attribute for the parameter.

Error ID
ERR_IXP_LKUPSYMATTR

Error name
IXP_LKUPSYMATTR

Cause
None.

1497
3 ERROR CODES

Solution
None.

3.60.40 14140
The parameter has an invalid symbol attribute type.

Error ID
ERR_IXP_INVSYMATTRTYPE

Error name
IXP_INVSYMATTRTYPE

Cause
None.

Solution
None.

3.60.41 14141
The value for the given parameter was not set.

Error ID
ERR_IXP_PARMVALNOTSET

Error name
IXP_PARMVALNOTSET

Cause
None.

Solution
None.

3.60.42 14142
Duplicate function block name.

Error ID
ERR_IXP_DUPLFBNAME

Error name
IXP_DUPLFBNAME

Cause
Another function block of a different type with the same name already exists.

1498 www.honeywell.com
 3 ERROR CODES

Solution
Re-name the function block.

3.60.43 14143
WARNING: This Function Block already exists. Its data will be overwritten.

Error ID
ERR_IXP_WARNFBEXISTS

Error name
IXP_WARNFBEXISTS

Cause
A function block with the same name already exists.

Solution
Re-name the function block.

3.60.44 14144
Unable to set redundancy type.

Error ID
ERR_IXP_SETREDTYPE

Error name
IXP_SETREDTYPE

Cause
None.

Solution
None.

3.60.45 14145
Unable to set the item as the secondary partner of this block.

Error ID
ERR_IXP_CANTSETPARTNER

Error name
IXP_CANTSETPARTNER

Cause
None.

1499
3 ERROR CODES

Solution
None.

3.60.46 14146
Unable to set this block as the secondary partner of the given item.

Error ID
ERR_IXP_CANTSETTHISASPTNR

Error name
IXP_CANTSETTHISASPTNR

Cause
None.

Solution
None.

3.60.47 14147
Unable to locate redundant primary CPM in ERDB.

Error ID
ERR_IXP_CANTLDPRISTRAT

Error name
IXP_CANTLDPRISTRAT

Cause
None.

Solution
None.

3.60.48 14148
Unable to create connection to the Data Source.

Error ID
ERR_IXP_CRERMAN

Error name
IXP_CRERMAN

Cause
None.

1500 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.49 14149
The database query failed to get the ERDB version information

Error ID
ERR_IXP_GETDBVER

Error name
IXP_GETDBVER

Cause
None.

Solution
None.

3.60.50 14150
Error getting EEC/IOC/DOC data from database.

Error ID
ERR_IXP_GETEEC

Error name
IXP_GETEEC

Cause
None.

Solution
None.

3.60.51 14151
The database query failed to get the connection type.

Error ID
ERR_IXP_GETCONNTYPE

Error name
IXP_GETCONNTYPE

Cause
None.

1501
3 ERROR CODES

Solution
None.

3.60.52 14152
Unable to open Import/Export status log for item.

Error ID
ERR_IXP_CANTOPENSLOG

Error name
IXP_CANTOPENSLOG

Cause
None.

Solution
None.

3.60.53 14153
Error converting IOM parameter index for the expression.

Error ID
ERR_IXP_CVTEXPR

Error name
IXP_CVTEXPR

Cause
None.

Solution
None.

3.60.54 14154
Could not locate the Execution Environment block in the database.

Error ID
ERR_IXP_CEENOTFOUND

Error name
IXP_CEENOTFOUND

Cause
None.

1502 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.55 14155
Unable to assign: the given block is not an Execution Environment Block.

Error ID
ERR_IXP_NOTACEE

Error name
IXP_NOTACEE

Cause
None.

Solution
None.

3.60.56 14156
Unable to assign this block to the Execution Environment.

Error ID
ERR_IXP_ASSIGNTOCEE

Error name
IXP_ASSIGNTOEE

Cause
None.

Solution
None.

3.60.57 14157
Unable to export Block State.

Error ID
ERR_IXP_BLOCKSTATE

Error name
IXP_BLOCKSTATE

Cause
None.

1503
3 ERROR CODES

Solution
None.

3.60.58 14158
Unable to export Embedded Block List.

Error ID
ERR_IXP_EMBBLKS

Error name
IXP_EMBBLKS

Cause
None.

Solution
None.

3.60.59 14159
Unable to determine if the Function Block already exists

Error ID
ERR_IXP_FBEXISTFAIL

Error name
IXP_FBEXISTFAIL

Cause
None.

Solution
None.

3.60.60 14160
Unable to set communications Path for the Control Processor Module (CPM).

Error ID
ERR_IXP_SETCOMMPATHFL

Error name
IXP_SETCOMMPATHFL

Cause
None.

1504 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.61 14161
Unable to set Execution Environment Code for the Control Processor Module (CPM).

Error ID
ERR_IXP_BLKSETCPMEEC

Error name
IXP_BLKSETCPMEEC

Cause
None.

Solution
None.

3.60.62 14162
Unable to get CommunicationsPath.

Error ID
ERR_IXP_GETCOMMPATHFL

Error name
IXP_GETCOMMPATHFL

Cause
None.

Solution
None.

3.60.63 14163
Unable to set Endian Bit for the Control Processor Module (CPM).

Error ID
ERR_IXP_SETPCMENDIAN

Error name
IXP_SETPCMENDIAN

Cause
None.

1505
3 ERROR CODES

Solution
None.

3.60.64 14164
WARNING: An SCM Handler connection to this block already exists.

Error ID
ERR_IXP_SCMHEXISTS

Error name
IXP_SCMHEXISTS

Cause
None.

Solution
None.

3.60.65 14165
Unable to get redundancy type.

Error ID
ERR_IXP_GETREDTYPE

Error name
IXP_GETREDTYPE

Cause
None.

Solution
None.

3.60.66 14166
Unable to get Execution Environment (EE) Code.

Error ID
ERR_IXP_BLKGETEEC

Error name
IXP_BLKGETEEC

Cause
None.

1506 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.67 14167
Database (DB) Query failure getting EEC/IOC/DOC from database.

Error ID
ERR_IXP_GETEECDB

Error name
IXP_GETEECDB

Cause
None.

Solution
None.

3.60.68 14168
Invalid redundancy type.

Error ID
ERR_IXP_INVREDTYPE

Error name
IXP_INVREDTYPE

Cause
None.

Solution
None.

3.60.69 14173
Step OPSRCEXPR NUMOUTPUTS is incorrectly configured.

Error ID
ERR_IXP_OSENUMOUT

Error name
IXP_OSENUMOUT

Cause
None.

1507
3 ERROR CODES

Solution
None.

3.60.70 14174
Error parsing SCM Expression for the parameter.

Error ID
ERR_IXP_EXPARSE

Error name
IXP_EXPARSE

Cause
None.

Solution
None.

3.60.71 14175
Current operation canceled by user request.

Error ID
ERR_IXP_USERCANCEL

Error name
IXP_USERCANCEL

Cause
None.

Solution
None.

3.60.72 14176
Unable to get the process path.

Error ID
ERR_IXP_PROCPATH

Error name
IXP_PROCPATH

Cause
None.

1508 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.73 14177
Unable to perform translation - import halted.

Error ID
ERR_IXP_XLATION

Error name
IXP_XLATION

Cause
None.

Solution
None.

3.60.74 14178
Graphical User Interface (GUI) file has incorrect version or invalid format.

Error ID
ERR_IXP_GUIFILEVERSION

Error name
IXP_GUIFILEVERSION

Cause
None.

Solution
None.

3.60.75 14179
Unable to load GUI Preferences from file.

Error ID
ERR_IXP_LOADGUITABLE

Error name
IXP_LOADGUITABLE

Cause
None.

1509
3 ERROR CODES

Solution
None.

3.60.76 14180
An error was encountered while trying to write the GUI Preferences file - file write aborted.

Error ID
ERR_IXP_SAVEGUITABLE

Error name
IXP_SAVEGUITABLE

Cause
None.

Solution
None.

3.60.77 14181
Error adding the GUI Preference (property) to Engineering Repository Database (ERDB).

Error ID
ERR_IXP_ADDGUIPREF

Error name
IXP_ADDGUIPREF

Cause
None.

Solution
None.

3.60.78 14182
Error getting GUI Preferences List from ERDB.

Error ID
ERR_IXP_GETGUIPREF

Error name
IXP_GETGUIPREF

Cause
None.

1510 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.60.79 14183
Error looking up active end tag.parameter, connection not made.

Error ID
ERR_IXP_EXPCONNACT

Error name
IXP_EXPCONNACT

Cause
None.

Solution
None.

3.60.80 14184
Error looking up passive end tag.parameter, connection not made.

Error ID
ERR_IXP_EXPCONNPASS

Error name
IXP_EXPCONNPASS

Cause
None.

Solution
None.

3.60.81 14185
WARNING: Block will be deleted. It does not exist in imported file.

Error ID
ERR_IXP_DELETEOLDBLOCK

Error name
IXP_DELETEOLDBLOCK

Cause
None.

1511
3 ERROR CODES

Solution
None.

3.60.82 14186
Error: Cannot lock the block.

Error ID
ERR_IXP_CANTLOCKBLOCK

Error name
IXP_CANTLOCKBLOCK

Cause
None.

Solution
None.

3.60.83 14187
Error: Cannot delete existing connection.

Error ID
ERR_IXP_CANTDELETECONN

Error name
IXP_CANTDELETECONN

Cause
None.

Solution
None.

3.60.84 14188
Could not connect to XML DOM.

Error ID
ERR_IXP_CANTCONNTODOM

Error name
IXP_CANTCONNTODOM

Cause
XML DOM has not been installed properly.

1512 www.honeywell.com
 3 ERROR CODES

Solution
Install XML DOM.

3.60.85 14189
XML DOM error creating element.

Error ID
ERR_IXP_XMLCREATEELEM

Error name
IXP_XMLCREATEELEM

Cause
Probably out of memory.

Solution
Re-configuration and try again.

3.60.86 14190
XML DOM error appending element to parent.

Error ID
ERR_IXP_XMLAPPEND

Error name
IXP_XMLAPPEND

Cause
Probably out of memory.

Solution
Re-configuration and try again.

3.60.87 14191
XML DOM error setting UNICODE encoding.

Error ID
ERR_IXP_XMLSETENCODE

Error name
IXP_XMLSETENCODE

Cause
Probably out of memory.

1513
3 ERROR CODES

Solution
Re-configuration and try again.

3.60.88 14192
XML DOM error setting schema name.

Error ID
ERR_IXP_XMLSETSCHEMA

Error name
IXP_XMLSETSCHEMA

Cause
Probably out of memory.

Solution
Re-configuration and try again.

3.60.89 14193
Exception while releasing XML DOM.

Error ID
ERR_IXP_XMLUNINIT

Error name
IXP_XMLUNINIT

Cause
Unknown.

Solution
Unknown

3.60.90 14194
Improperly constructed XML document.

Error ID
ERR_IXP_XMLIMPROPERXML

Error name
IXP_XMLIMPROPERXML

Cause
Document does not match the schema.

1514 www.honeywell.com
 3 ERROR CODES

Solution
Ensure that the document complies with the schema.

3.60.91 14195
Unable to load the XML string.

Error ID
ERR_IXP_XMLLOADSTRING

Error name
IXP_XMLLOADSTRING

Cause
Most likely the document does not match the schema.

Solution
Ensure that the document complies with the schema.

3.60.92 14196
Unable to retrieve the XML string.

Error ID
ERR_IXP_XMLGETSTRING

Error name
IXP_XMLGETSTRING

Cause
Probably out of memory.

Solution
Re-configuration and try again.

3.60.93 14197
An unfinished transaction is in progress.

Error ID
ERR_IXP_TRANSACTIONINPROGRESS

Error name
IXP_TRANSACTIONINPROGRESS

Cause
A transaction was started by calling ImportStart but was not finished with ImportComplete.

1515
3 ERROR CODES

Solution
Call ImportComplete.

3.60.94 14198
Import of block interrupted.

Error ID
ERR_IXP_IMPORTINTERRUPT

Error name
IXP_TRANSACTIONINPROGRESS

Cause
An Import operation was started but ImportComplete was not called.

Solution
Call ImportComplete.

3.60.95 14199
A transaction must be started prior to this operation.

Error ID
ERR_IXP_TRANSACTIONNEEDED

Error name
IXP_TRANSACTIONNEEDED

Cause
ImportStart must be called prior to an ImportBlock or ImportComplete.

Solution
Call ImportStart.

1516 www.honeywell.com
 3 ERROR CODES

3.61 Codes 14200 to 14297

Related topics
“14200” on page 1518
“14201” on page 1519
“14202” on page 1519
“14203” on page 1519
“14204” on page 1520
“14205” on page 1520
“14206” on page 1520
“14207” on page 1521
“14208” on page 1521
“14209” on page 1521
“14210” on page 1522
“14211” on page 1522
“14212” on page 1522
“14213” on page 1523
“14214” on page 1523
“14215” on page 1523
“14216” on page 1524
“14219” on page 1524
“14220” on page 1524
“14221” on page 1525
“14222” on page 1525
“14223” on page 1525
“14224” on page 1526
“14225” on page 1526
“14226” on page 1526
“14227” on page 1527
“14228” on page 1527
“14229” on page 1527
“14230” on page 1528
“14231” on page 1528
“14232” on page 1528
“14233” on page 1529
“14234” on page 1529
“14236” on page 1529
“14237” on page 1530
“14238” on page 1530
“14239” on page 1530
“14240” on page 1531
“14251” on page 1531
“14252” on page 1531
“14253” on page 1532
“14254” on page 1532
“14255” on page 1532
“14256” on page 1533

1517
3 ERROR CODES

“14257” on page 1533

“14258” on page 1533
“14259” on page 1534
“14260” on page 1534
“14261” on page 1534
“14262” on page 1535
“14263” on page 1535
“14264” on page 1535
“14265” on page 1536
“14266” on page 1536
“14267” on page 1536
“14268” on page 1537
“14269” on page 1537
“14270” on page 1538
“14271” on page 1538
“14272” on page 1538
“14273” on page 1539
“14274” on page 1539
“14275” on page 1539
“14276” on page 1540
“14277” on page 1540
“14278” on page 1540
“14279” on page 1541
“14280” on page 1541
“14281” on page 1541
“14282” on page 1542
“14283” on page 1542
“14284” on page 1542
“14285” on page 1543
“14287” on page 1543
“14288” on page 1543
“14291” on page 1544
“14292” on page 1544
“14293” on page 1544
“14294” on page 1545
“14295” on page 1545
“14296” on page 1545
“14297” on page 1546

3.61.1 14200
Unable to delete block, not found.

Error ID
ERR_IXP_BLOCKNOTFOUND

Error name
IXP_BLOCKNOTFOUND

1518 www.honeywell.com
 3 ERROR CODES

Cause
Could not delete the block because it does not exist.
In QVCS, error is displayed if the User is trying to Undo Check out of an object when it is deleted from the
Project or Library Tree.

Solution
Do not attempt to delete blocks that do not exist.
In QVCS, the user can use the Query for objects deleted from Tree in the Query window and revert it back to
the tree. This is true only if the object is checked into QVCS. Otherwise, there is no way the user can recover
from this state.

3.61.2 14201
Unable to create Schema cache.

Error ID
ERR_IXP_XMLCREATECACHE

Error name
IXP_XMLCREATECACHE

Cause
Probably out of memory.

Solution
Re-configuration and try again.

3.61.3 14202
Unable to load Schema.

Error ID
ERR_IXP_XMLLOADSCHEMA

Error name
IXP_XMLLOADSCHEMA

Cause
Either the Schema file could not be found or is incorrect.

Solution
Ensure the software is installed properly.

3.61.4 14203
Unable to add the Schema to the document.

1519
3 ERROR CODES

Error ID
ERR_IXP_XMLADDSCHEMA

Error name
IXP_XMLADDSCHEMA

Cause
The Schema file is incorrect.

Solution
Ensure the software is installed properly.

3.61.5 14204
Unable to validate the document against the Schema.

Error ID
ERR_IXP_XMLVALIDATE

Error name
IXP_XMLVALIDATE

Cause
The XML document or string is incorrectly formatted.

Solution
Format the XML data according to the published schema.

3.61.6 14205
Unable to determine where the Schema is located.

Error ID
ERR_IXP_XMLFINDSCHEMAS

Error name
IXP_XMLFINDSCHEMAS

Cause
The Registry settings for the Experion PKS installation could not be found.

Solution
Ensure the software is installed properly.

3.61.7 14206
Empty pattern encountered in filter.

1520 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_NOPATTERN

Error name
IXP_NOPATTERN

Cause
A Block List contained an empty pattern filter.

Solution
Use correct syntax for pattern filters.

3.61.8 14207
Unknown filter type encountered.

Error ID
ERR_IXP_BADFILTER

Error name
IXP_BADFILTER

Cause
A Filter contained an unknown filter type.

Solution
Use correct syntax for filters.

3.61.9 14208
Error on call to the Control Library.

Error ID
ERR_IXP_CTRLLIBERROR

Error name
IXP_CTRLLIBERROR

Cause
A call to the Control Library returned an error.

Solution
Unknown.

3.61.10 14209
Unable to find the name in the library.

1521
3 ERROR CODES

Error ID
ERR_IXP_XLATENAME

Error name
IXP_XLATENAME

Cause
The name does not exist in the library.

Solution
Use a name that exists.

3.61.11 14210
Cannot match block name with block in the device.

Error ID
ERR_IXP_CANNOTMATCH

Error name
IXP_CANNOTMATCH

Cause
Block name in import file does not match the name of the block in the device.

Solution
Manually assign the device.

3.61.12 14211
The block is assigned to a different device than requested.

Error ID
ERR_IXP_ALREADYASSIGNED

Error name
IXP_ALREADYASSIGNED

Cause
Block is already assigned to different device than requested.

Solution
Manually assign the device.

3.61.13 14212
Error parsing expression for the parameter.

1522 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_EXPARSE_NONSCM

Error name
IXP_EXPARSE_NONSCM

Cause
Probable syntax error or problem finding block referenced in expression.

Solution
Fix error or import referenced block and import again.

3.61.14 14213
The container does not exist.

Error ID
ERR_IXP_CONTAINERNOTFOUND

Error name
IXP_CONTAINERNOTFOUND

Cause
Container of imported CM/SCM does not exist.

Solution
Import the container, and then import the contained object.

3.61.15 14214
Renamed Projected Parameter to resolve Inherent Parameter Name collision.

Error ID
ERR_IXP_RENAMEDPROJPARAM

Error name
IXP_RENAMEDPROJPARAM

Cause
Projected Parameter Conflict with Inherent Parameter Name during Migration.

Solution
Rename the Projected Parameter.

3.61.16 14215
Origin for the Projected Parameter does not exist.

1523
3 ERROR CODES

Error ID
ERR_IXP_ORIGINDOESNOTEXIST

Error name
IXP_ORIGINDOESNOTEXIST

Cause
Origin parameter does not exist on Origin Block during Projected Parameter origin assignment.

Solution
Ensure that origin parameter exists on Origin Block.

3.61.17 14216
The origin of which is the origin of the Projected Parameter does not exist.

Error ID
ERR_IXP_CANTLOADSTRATEGY

Error name
IXP_CANTLOADSTRATEGY

Cause
A reference exists to a block that was deleted and no longer exists in the ERDB.

Solution
Delete the reference or create the block.

3.61.18 14219
Failed Version Control System (VCS) validation.

Error ID
ERR_IXP_VCSVALIDATION

Error name
IXP_VCSVALIDATION

Cause
Did not adhere to VCS rules.

Solution
Adhere to rules and try again.

3.61.19 14220
Could not set as container.

1524 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_CONTAINERNOTSET

Error name
IXP_CONTAINERNOTSET

Cause
The strategy has graphical connections, and is not contained by the Root, or it is an Origin Block, or it is
template defined by its container parent.

Solution
Eliminate the cause, and re-import.

3.61.20 14221
Block type <name> already exists.

Error ID
ERR_IXP_BLOCKTYPEEXISTS

Error name
IXP_BLOCKTYPEEXISTS

Cause
The block type already exists, change the name or use update.

Solution
Eliminate the cause, and re-import.

3.61.21 14222
Invalid Float Format for parameter <name>.

Error ID
ERR_IXP_INVALIDFLOATVAL

Error name
IXP_INVALIDFLOATVAL

Cause
The block type already exists, change the name or use update.

Solution
Eliminate the cause and re-import.

3.61.22 14223
Maximum number of parameters exceeded for <name>. Limit is 1000.

1525
3 ERROR CODES

Error ID
ERR_IXP_MAXPARAMS

Error name
IXP_MAXPARAMS

Cause
The block type has a limit of 1000 parameters.

Solution
Eliminate the cause, and re-import.

3.61.23 14224
Invalid Integer format for parameter <name>.

Error ID
ERR_IXP_INVALIDINTVAL

Error name
IXP_INVALIDINTVAL

Cause
None.

Solution
Eliminate the cause, and re-import.

3.61.24 14225
Invalid Enumeration Set <name>.

Error ID
ERR_IXP_INVENUMSET

Error name
IXP_INVENUMSET

Cause
None.

Solution
Eliminate the cause, and re-import.

3.61.25 14226
Failed to update the block type name in the Export File.

1526 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_FLDBTNAMEUPD

Error name
IXP_FLDBTNAMEUPD

Cause
Check error log for any errors reported by DEFXML.

Solution
Eliminate the cause, and re-import.

3.61.26 14227
Failed to update the library name in the Export file.

Error ID
ERR_IXP_FLDLIBNAMEUPD

Error name
IXP_FLDLIBNAMEUPD

Cause
Check error log for any errors reported by DEFXML.

Solution
Eliminate the cause, and re-export.

3.61.27 14228
None.

Error ID
ERR_IXP_UPDTBTNOTFOUND

Cause
None.

Solution
None.

3.61.28 14229
Invalid Enumerator String for parameter <name>.

Error ID
ERR_IXP_INVALIDENUMVAL

1527
3 ERROR CODES

Error name
IXP_INVALIDENUMVAL

Cause
The used enum string is not valid, or the enum set is incomplete.

Solution
Use another enum string or add the enum string to the enum set.

3.61.29 14230
The AssignFteb returned an error while assigning function blocks to FTE Bridge.

Error ID
ERR_IXP_FTEBNOTASSIGN

Error name
IXP_FTEBNOTASSIGN

Cause
The children for FTE Bridge were not assigned properly.

Solution
Import FTEB first and then the CPM,IOLIM,FIM and RM.

3.61.30 14231
Export of the selected block(s) failed.

Error ID
ERR_IXP_EXPORTBLOCKTYPEFAILED

Error name
IXP_EXPORTBLOCKTYPEFAILED

Cause
The XML files of the block types are missing.

Solution
Populate those templates using the New->Type command on the File menu in Control Builder.

3.61.31 14232
One or more selections removed from list - Do not contain PID block.

Error ID
ERR_IXP_SELECTIONREMOVED

1528 www.honeywell.com
 3 ERROR CODES

Error name
IXP_SELECTIONREMOVED

Cause
A selection was made that is either not a Control Module (CM) point or is a CM that does not contain a PID
block.

Solution
Check error log for selections removed and rerun with correct selections.

3.61.32 14233
Error configuring connections in container block

Error ID
ERR_IXP_ERR_COMPOSITE_CONNECTION

Error name
IXP_CONNECTION_ERR

Cause
A error was encountered when doing the final configuration of the container(like CM or SCM)

Solution
Eliminate the cause, and re-import.

3.61.33 14234
Error in executing the migration hook in container block.

Error ID
ERR_IXP_ERR_BLOCK_MIGRATE

Error name
IXP_MIGRATE_ERR

Cause
A error was encountered when doing the final configuration of the container.

Solution
Eliminate the cause, and re-import.

3.61.34 14236
WARNING

Error ID
ERR_IXP_EMBIMPORTOVERWRITE

1529
3 ERROR CODES

Error name
IXP_EMBIMPORTOVERWRITE

Cause
Entity/Strategy imported already exists with different name or under different parent.

Solution
Choose the overwrite option and re-import if you want to overwrite existing entity information.

3.61.35 14237
WARNING

Error ID
ERR_IXP_EMBIMPORTPARENTMISSING

Error name
IXP_EMBIMPORTPARENTMISSING

Cause
Parent specified for imported entity does not exists

Solution
Make sure before importing that parent for the imported Entity/Strategy already exist.

3.61.36 14238
A file with the same already exists, export skipped.

Error ID
ERR_IXP_FILEEXISTSINPATH

Error name
IXP_FILEEXISTINPATH

Cause
A file had been found with the same in selected path.

Solution
Rename the existing file or change the selected directory in export dialog. Re-export with the overwrite option
checked in.

3.61.37 14239
CCL file not found. Assuming CCL file not intended, continue with the import.

Error ID
ERR_IXP_CCLFILE_NOT_FOUND

1530 www.honeywell.com
 3 ERROR CODES

Error name
IXP_CCLFILE_NOT_FOUND

Cause
The CCL file was not found. Most probable cause was CCL was not intended, so just ignore the msg.

Solution
None.

3.61.38 14240
The function block cannot be imported as the new rule has been added to ignore import of such functional
blocks.

Error ID
ERR_IXP_SKIP_OBJ_IMPORT

Error name
IXP_SKIP_OBJ_IMPORT

Cause
Some function blocks templates might have been removed in the later versions. If a user is trying to import
functional blocks of non-applicable types (as per the rule files) for that release, the object import will be
skipped.
For example, ANCIM is replaced with ESM in R400.1 from R3xx to R400.1. Therefore, new rules are added in
R400.1 to ignore the ANCIM nodes import when the nodes are exported from earlier releases.

Solution
Import the function block that has replaced the obsolete function block.

3.61.39 14251
Array has been reduced in size or dimension while instances exist.

Error ID
ERR_IXP_ERR_ARRAYSIZE_REDUCTION

Error name
IXP_ERR_ARRAYSIZE_REDUCTION

Cause
A re-import of a template was made when instances exist and an array reduction in size or dimension was made.

Solution
Either dont re-import or reinitialize the database.

3.61.40 14252
Cannot read Parameter definition.

1531
3 ERROR CODES

Error ID
ERR_IXP_ERR_GET_PARAMDEF

Error name
IXP_ERR_GET_PARAMDEF

Cause
Cannot read parameter def information from ERDB during import.

Solution
Eliminate the cause and reimport.

3.61.41 14253
Import Error. GUID found in the database, but the ID in import file doesn't match ID in the database.

Error ID
ERR_IXP_DIFFIDFROMGUID

Error name
IXP_DIFFIDFROMGUID

Cause
Improper editing of the import file. Should never happen

Solution
Eliminate the cause, and re-import.

3.61.42 14254
BLOCKTYPEID for instance being imported does not correspond to a CAB Block Type in the Database.

Error ID
ERR_IXP_BLOCKTYPEID_NOT_FOUND

Error name
IIXP_BLOCKTYPEID_NOT_FOUND

Cause
Importing an instance and not its corresponding type.

Solution
On original system, export the type and then immediately export the instance without modifying the type.

3.61.43 14255
BLOCKTYPEID for instance being imported does not correspond to a CAB Block Type in the Database.

1532 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_BLOCKTYPEID_NOT_SEARCHED

Error name
IIXP_BLOCKTYPEID_NOT_SEARCHED

Cause
Importing an instance and not its corresponding type.

Solution
On original system, export the type and then immediately export the instance without modifying the type.

3.61.44 14256
Cannot get control sessions preference settings.

Error ID
ERR_IXP_SESSION_PREF_ERR

Error name
IXP_ SESSION_PREF_ERR

Cause
Cannot read control session preference setting

Solution
Eliminate the cause and retry.

3.61.45 14257
Import aborted.

Error ID
ERR_IXP_IMPORT_ABORT

Error name
IXP_IMPORT_ABORT

Cause
FTE configuration is invalid so import aborted.

Solution
Configure the FTE address information.

3.61.46 14258
FTE base IP invalid. Configure FTE Base IP address before importing.

1533
3 ERROR CODES

Error ID
ERR_IXP_FTE_INVALID

Error name
IXP_FTE_INVALID

Cause
The network type is FTE and its Base IP address information is invalid that is, either NULL or not configured.

Solution
Configure the Base IP address.

3.61.47 14259
Failed to configure Function Block.

Error ID
ERR_IXP_ERR_CONFIGURING_FB

Error name
IXP_ERR_CONFIGURING_FB

Cause
Exception raised during configuring strategy.

Solution
None.

3.61.48 14260
Deleteof the Block Type failed.

Error ID
ERR_IXP_DELETEBLOCKTYPEFAILED

Error name
IXP_DELETEBLOCKTYPEFAILED

Cause
A error was encountered when deleting the block type type

Solution
Eliminate the cause, and re-invoke the API.

3.61.49 14261
Reimport the function block along with corresponding block type with the overwrite existing option checked in
import dialog.

1534 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_REIMPORT_FB_ALONGWITH_BT

Error name
IXP_REIMPORT_FB_ALONGWITH_BT

Cause
Importing an instance and not its corresponding type.

Solution
Reimport the block instance along with the corresponding block types.

3.61.50 14262
VCS maps not set. Block version will not be updated if under VCS control.

Error ID
ERR_IXP_VSCVERSIONS_NOT_UPDATED

Error name
IXP_VCSVERSIONS_NOT_UPDATED

Cause
Internal error in import export module.

Solution
None.

3.61.51 14263
Arrayed rule parameter specified for non-arrayed parameter.

Error ID
ERR_IXP_NOT_ARRAYED_PARAM

Error name
IXP_NOT_ARRAYED_PARAM

Cause
An arrayed parameter rule is specified for a parameter which is not arrayed.

Solution
Make sure the parameter is arrayed. Configure .def.xml accordingly and re-import.

3.61.52 14264
Parameter rule index invalid. Parameter rule not added.

1535
3 ERROR CODES

Error ID
ERR_IXP_PARAM_RULE_NOT_ADDED

Error name
IXP_PARAM_RULE_NOT_ADDED

Cause
Parameter rule index invalid.

Solution
Eliminate the cause and retry import.

3.61.53 14265
Error getting the IP address for driver.

Error ID
ERR_IXP_FAILED_TO_GET_IPADDRESS

Error name
IXP_FAILED_TO_GET_IPADDRESS

Cause
Most possible cause is the CDA service not running.

Solution
Start CDA services.

3.61.54 14266
The parameter type of reference parameter does not match with that of condition parameter.

Error ID
ERR_IXP_PARAMTYPE_MISMATCH

Error name
IXP_PARAMTYPE_MISMATCH

Cause
The parameter type of reference parameter does not match with that of condition parameter in the parameter
rule.

Solution
Make sure that the parameter type of reference parameter is the same of the condition parameter.

3.61.55 14267
<DATAALLOC> attribute set to FALSE when <operationalcheckpointdata> is TRUE.

1536 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_IXP_INVALID_PARAM_ATTRIBUTES_OCD

Error name
IXP_INVALID_PARAM_ATTRIBUTES_OCD

Cause
For this parameter <DATAALLOC> attribute is FALSE although <operationalcheckpointdata> is TRUE

Solution
Eliminate the cause and retry.

3.61.56 14268
<DATAALLOC> attribute set to FALSE when <load destination> is non-zero.

Error ID
ERR_IXP_INVALID_PARAM_ATTRIBUTES_LD

Error name
IXP_INVALID_PARAM_ATTRIBUTES_LD

Cause
For this parameter <DATAALLOC> attribute is FALSE although <load destination> is non-zero a nd this is not
an INOUTCONN type parameter.

Solution
Eliminate the cause and retry.

3.61.57 14269
Import of configuration files older than two Releases is not supported. Migrate to an intermediate release and try
again.

Error ID
ERR_IXP_XLATION_NOT_SUPPORTED

Error name
IXP_XLATION_NOT_SUPPORTED

Cause
Direct translation between releases not supported where difference between DB version is more then two.

Solution
Migrate to a intermediate release and try again.

1537
3 ERROR CODES

3.61.58 14270
Ensure the rule file is present.

Error ID
ERR_IXP_RULE_FILE_MISSING

Error name
IXP_RULE_FILE_MISSING

Cause
Rule file required for translation is missing.

Solution
Put the rule file at specified path and try again.

3.61.59 14271
Arrayed pin exposure permission specified for non arrayed parameter. Pin exposure permission defaulted to
INANDOUT

Error ID
ERR_IXP_INVALID_PINEXPOPERM

Error name
IXP_INVALID_PINEXPOPERM

Cause
Arrayed pin exposure permission specified for non arrayed parameter.

Solution
Give a proper pin exposure permission and retry import.

3.61.60 14272
An invalid character was found in XML text content. Remove the invalid char.

Error ID
ERR_IXP_INVALID_CHAR_FOUNDINXML

Error name
IXP_INVALID_CHAR_FOUNDINXML

Cause
Character doesn't fall in valid XML character ranges that are defined by the W3C XML language specification.

1538 www.honeywell.com
 3 ERROR CODES

Solution
Replace the character with a valid one.

3.61.61 14273
Failed to load XML file in DOM.

Error ID
ERR_IXP_CANNOT_LOADXMLFILE

Error name
IXP_CANNOT_LOADXMLFILE

Cause
MSXML failed to load the XML file into DOM.

Solution
Eliminate the cause and retry.

3.61.62 14274
The IO Channel is already connected to another IOC. Cannot connect to this channel.

Error ID
ERR_IXP_DUPLICATE_IOCCONNECTION

Error name
IXP_DUPLICATE_IOCCONNECTION

Cause
Duplicate IO channel connection was attempted.

Solution
Resolve channel connection after import.

3.61.63 14275
Object doesn's belong to this project. Import in appropriate project.

Error ID
ERR_IXP_OBJTYPE_PROJTYPE_MISMATCH

Error name
IXP_OBJTYPE_PROJTYPE_MISMATCH

Cause
Object being imported doesn't belong to this project type.

1539
3 ERROR CODES

Solution
Import in appropriate project.

3.61.64 14276
Blocktype with different blocktype ID found in DB. Importing under a new library.

Error ID
ERR_IXP_BLOCKTYPE_DIFFBTID_FOUND

Error name
IXP_BLOCKTYPE_DIFFBTID_FOUND

Cause
Happens with custom blocktype when the blocktype being imported has different blocktype ID then one present
in DB.

Solution
Resolve blocktype ID conflict.

3.61.65 14277
Hardware block cannot be imported as it has a name collision with a block present in DB.

Error ID
ERR_IXP_HWBLOCK_IMPORT_FAILED

Error name
IXP_HWBLOCK_IMPORT_FAILED

Cause
Hardware block contains EE\IOLINK which had a name collision with a block present in ERDB.

Solution
Rename the block present in DB and reimport configuration file.

3.61.66 14278
Existing SL file could not be deleted

Error ID
ERR_IXP_FILENOTDELETED

Error name
IXP_FILENOTDELETED

Cause
None.

1540 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.61.67 14279
CPM redundancy collision. Delete the secondary if loaded and perform re-import.

Error ID
ERR_IXP_CANT_PERFORM_WHEN_LOADED

Error name
IXP_CANT_PERFORM_WHEN_LOADED

Cause
The secondary is already loaded. Import cannot proceed unless the module is deleted from monitoring.

Solution
Delete Secondary module from monitoring and perform the operation again.

3.61.68 14280
Failed to get file attributes due to system error.

Error ID
ERR_IXP_FAILED_GETTIMESTAMP

Error name
IXP_FAILED_GETTIMESTAMP

Cause
Failed to get CCLs time stamp.

Solution
None.

3.61.69 14281
CCL files could not be accessed due to system error.

Error ID
ERR_IXP_CCLFILEACCESSFAILED

Error name
IXP_CCLFILEACCESSFAILED

Cause
Failed to access CCL file.

1541
3 ERROR CODES

Solution
None.

3.61.70 14282
CEE unassignment failed.

Error ID
ERR_IXP_CEE_UNASSIGN_FAILED

Error name
IXP_CEE_UNASSIGN_FAILED

Cause
The block is loaded which would prevent from getting unassigned.

Solution
Delete the block from monitoring side and perform Import/QVCS operation again.

3.61.71 14283
Insufficient disk space available, failed in creating the file.

Error ID
ERR_IXP_DISK_FULL

Error name
IXP_DISK_FULL

Cause
Disk space is not available therefore, file cannot be created.

Solution
Insert a new disk which has sufficient space.

3.61.72 14284
When importing a loaded CM that is already loaded to monitoring side, it results in error.

Error ID
ERR_IXP_CANT_IMPORT_IF_LOADED

Error name
IXP_CANT_IMPORT_IF_LOADED

Cause
Block is already loaded to monitoring side.

1542 www.honeywell.com
 3 ERROR CODES

Solution
Delete from monitoring side and reimport.

3.61.73 14285
The Base User Defined Template for this block is not found. You may need to reimport it along with the UDT.

Error ID
ERR_IXP_BASE_UDT_NOT_FOUND

Error name
IXP_BASE_UDT_NOT_FOUND

Cause
The strategy/block type that is being imported is created from an UDT which is missing in ERDB

Solution
Remiport along with the base UDT.

3.61.74 14287
Failed to read XML file

Error ID
ERR_IXP_ERROREADINGXMLFILE

Error name
IXP_ERROREADINGXMLFILE

Cause
The file may not be present in the target directory

Solution
Check if the file is present in the target directory. If absent, copy the file to the appropriate path.

3.61.75 14288
Cannot update derivation parent for templates directly under the USER library.

Error ID
ERR_IXP_CANNOT_UPDATE_PARENT

Error name
IXP_CANNOT_UPDATE_PARENT

Cause
The sub-template is imported without base template and later both, base template and sub-template are re-
imported.

1543
3 ERROR CODES

The sub-template previously imported establishes a root template relationship that cannot be manipulated.

Solution
Delete the sub-template and import it along with the Base User Defined Template

3.61.76 14291
Invalid block name is entered.

Error ID
ERR_IXP_INVALID_BLOCKNAME

Error name
IXP_INVALID_BLOCKNAME

Cause
Entered an invalid block name.

Solution
Enter a valid block name.

3.61.77 14292
The specified IO channel block/FF block cannot be unassigned because the CM is loaded in the Controller
(CEE). Delete the CM from the Monitoring view and retry the unassignment operation.

Error ID
ERR_IXP_UNASSIGNLOADEDIOC

Error name
IXP_UNASSIGNLOADEDIOC

Cause
Error occurred when attempting to unassign the IO channel block/FF block.

Solution
Delete the IO channel block's Control Module from the Monitoring view and then retry the unassignment
operation.

3.61.78 14293
Failed to initialize XML objects.

Error ID
ERR_IXP_FAILED_XMLOBJECTS_INITIALIZE

Error name
IXP_FAILED_XMLOBJECTS_INITIALIZE

1544 www.honeywell.com
 3 ERROR CODES

Cause
Initialization of XML objects failed.

Solution
None

3.61.79 14294
Empty section is available in the XML file for the tag.

Error ID
ERR_IXP_NULL_SECTION

Error name
IXP_NULL_SECTION

Cause
Section is empty for the tag in the XML file.

Solution
Enter a non-null section.

3.61.80 14295
The template already exists in a different library. But, after import it is moved to the new library.

Error ID
ERR_IXP_LIBRARY_CHANGED

Error name
ERR_IXP_LIBRARY_CHANGED

Cause
The imported template is in a different library and the existing template present in the Control Builder is
available in a different library.

Attention
It is applicable when the template imported is already available in the Control Builder and Overwrite existing object
option is selected for the import operation.

Solution
None

3.61.81 14296
Parameter contains an invalid enumeration value.

Error ID
ERR_IXP_INVALID_PARAM_ENUM_VALUE

1545
3 ERROR CODES

Error name
IXP_INVALID_PARAM_VALUE

Cause
The enumeration value used by the parameter does not exist in the database.

Solution
Open the block type in PDE, select ENUM as the data type, and then select the existing enumeration value.

3.61.82 14297
Import failed as the channel type cannot be changed when a channel block is available in the Control Module.

Error ID
ERR_IXP_CANNOT_CHANGE_CHANNEL_TYPE

Error name
ERR_IXP_CANNOT_CHANGE_CHANNEL_TYPE

Cause
Import failed as the channel type cannot be changed when a channel block is available in the Control Module.

Solution
Unassign the channel block and then import the channel type.

1546 www.honeywell.com
 3 ERROR CODES

3.62 Codes 14601 to 14699

Related topics
“14601” on page 1549
“14602” on page 1549
“14603” on page 1549
“14604” on page 1550
“14605” on page 1550
“14606” on page 1550
“14607” on page 1551
“14608” on page 1551
“14609” on page 1551
“14610” on page 1552
“14611” on page 1552
“14612” on page 1552
“14613” on page 1553
“14614” on page 1553
“14615” on page 1553
“14616” on page 1554
“14617” on page 1554
“14618” on page 1554
“14619” on page 1555
“14620” on page 1555
“14621” on page 1555
“14622” on page 1556
“14623” on page 1556
“14624” on page 1556
“14625” on page 1557
“14626” on page 1557
“14627” on page 1557
“14628” on page 1558
“14629” on page 1558
“14630” on page 1558
“14631” on page 1559
“14632” on page 1559
“14633” on page 1559
“14634” on page 1560
“14635” on page 1560
“14636” on page 1560
“14637” on page 1561
“14638” on page 1561
“14639” on page 1561
“14640” on page 1562
“14641” on page 1562
“14642” on page 1562
“14643” on page 1563
“14644” on page 1563

1547
3 ERROR CODES

“14645” on page 1563

“14646” on page 1564
“14647” on page 1564
“14648” on page 1564
“14649” on page 1565
“14650” on page 1565
“14651” on page 1566
“14652” on page 1566
“14653” on page 1566
“14654” on page 1567
“14655” on page 1567
“14656” on page 1567
“14657” on page 1568
“14658” on page 1568
“14659” on page 1568
“14660” on page 1569
“14661” on page 1569
“14662” on page 1569
“14663” on page 1570
“14664” on page 1570
“14665” on page 1570
“14666” on page 1571
“14667” on page 1571
“14668” on page 1571
“14669” on page 1572
“14670” on page 1572
“14671” on page 1572
“14672” on page 1573
“14673” on page 1573
“14674” on page 1573
“14675” on page 1574
“14676” on page 1574
“14677” on page 1574
“14678” on page 1575
“14679” on page 1575
“14680” on page 1575
“14681” on page 1576
“14682” on page 1576
“14683” on page 1576
“14684” on page 1577
“14685” on page 1577
“14686” on page 1577
“14687” on page 1578
“14688” on page 1578
“14689” on page 1578
“14690” on page 1579
“14691” on page 1579
“14692” on page 1579

1548 www.honeywell.com
 3 ERROR CODES

“14693” on page 1580

“14694” on page 1580
“14695” on page 1580
“14696” on page 1581
“14697” on page 1581
“14698” on page 1581
“14699” on page 1582

3.62.1 14601
Version Control System Test Error 1.

Error ID
ERR_VCS_TEST1

Error name
VCS_TEST1

Cause
Used in Developer test software only - this will never appear in the Released product.

Solution
None

3.62.2 14602
Could not access the Version Control System database.

Error ID
ERR_VCS_DATABASE

Error name
VCS_DATABASE

Cause
None.

Solution
None.

3.62.3 14603
Could not allocate a handle.

Error ID
ERR_VCS_NOHANDLE

1549
3 ERROR CODES

Error name
VCS_NOHANDLE

Cause
None.

Solution
None.

3.62.4 14604
Handle is invalid.

Error ID
ERR_VCS_INVALIDHANDLE

Error name
VCS_INVALIDHANDLE

Cause
None.

Solution
None.

3.62.5 14605
Could not create a Control Library object.

Error ID
ERR_VCS_NOCL

Error name
VCS_NOCL

Cause
None.

Solution
None.

3.62.6 14606
Could not update due to database error.

Error ID
ERR_VCS_UPDATEFAILED

1550 www.honeywell.com
 3 ERROR CODES

Error name
VCS_UPDATEFAILED

Cause
None.

Solution
None.

3.62.7 14607
This call is not valid when Version Control System support is set to full, or not implemented.

Error ID
ERR_VCS_INVALIDOPERATION

Error name
VCS_INVALIDOPERATIO

Cause
None.

Solution
None.

3.62.8 14608
The Version Control System Database is locked.

Error ID
ERR_VCS_DATABASELOCKED

Error name
VCS_DATABASELOCKED

Cause
None.

Solution
None.

3.62.9 14609
The object is already locked.

Error ID
ERR_VCS_OBJECTLOCKED

1551
3 ERROR CODES

Error name
VCS_OBJECTLOCKED

Cause
None.

Solution
None.

3.62.10 14610
The object must be locked, but it is not locked.

Error ID
ERR_VCS_OBJECTNOTLOCKED

Error name
VCS_OBJECTNOTLOCKED

Cause
None.

Solution
None.

3.62.11 14611
An invalid transaction ID was specified.

Error ID
ERR_VCS_INVALIDTRANSACTION

Error name
VCS_INVALIDTRANSACTION

Cause
None.

Solution
None.

3.62.12 14612
The object is locked by a different transaction ID, or the database is locked.

Error ID
ERR_VCS_CANNOTUNLOCK

1552 www.honeywell.com
 3 ERROR CODES

Error name
VCS_CANNOTUNLOCK

Cause
None.

Solution
None.

3.62.13 14613
General Version Control System error, specific information is contained in the error text.

Error ID
ERR_VCS_ERROR

Error name
QVCS_ERROR

Cause
None.

Solution
None.

3.62.14 14614
A comment is required, but none was provided.

Error ID
ERR_VCS_NOCOMMENT

Error name
VCS_NOCOMMENT

Cause
None.

Solution
None.

3.62.15 14615
Object does not exist in Version Control System.

Error ID
ERR_VCS_INVALIDOBJECT

1553
3 ERROR CODES

Error name
VCS_INVALIDOBJECT

Cause
None.

Solution
None.

3.62.16 14616
Object name is already used.

Error ID
ERR_VCS_DUPLICATENAME

Error name
VCS_DUPLICATENAME

Cause
None.

Solution
None.

3.62.17 14617
Version already exists.

Error ID
ERR_VCS_DUPLICATEVERSION

Error name
None.

Cause
None.

Solution
None.

3.62.18 14618
Version does not exist for the object.

Error ID
ERR_VCS_INVALIDVERSION

1554 www.honeywell.com
 3 ERROR CODES

Error name
VCS_INVALIDVERSION

Cause
None.

Solution
None.

3.62.19 14619
Qualification state does not exist.

Error ID
ERR_VCS_INVALIDQUAL

Error name
VCS_INVALIDQUAL

Cause
None.

Solution
None.

3.62.20 14620
Qualification state is referenced by other items.

Error ID
ERR_VCS_QUALSTATEREFER

Error name
VCS_QUALSTATEREFER

Cause
None.

Solution
None.

3.62.21 14621
The definition of the qualification state has changed (name only).

Error ID
ERR_VCS_QUALSTATECHANGED

1555
3 ERROR CODES

Error name
VCS_QUALSTATECHANGED

Cause
None.

Solution
None.

3.62.22 14622
Criterion for restricted signature were not met.

Error ID
ERR_VCS_RESTRICTEDSIGN_EX

Error name
VCS_RESTRICTEDSIGN

Cause
None.

Solution
None.

3.62.23 14623
User is not authorized to sign.

Error ID
ERR_VCS_NOTAUTHORIZED

Error name
VCS_NOTAUTHORIZED

Cause
None.

Solution
None.

3.62.24 14624
Filter is invalid (type or operator).

Error ID
ERR_VCS_INVALIDFILTER

1556 www.honeywell.com
 3 ERROR CODES

Error name
VCS_INVALIDFILTER

Cause
None.

Solution
None.

3.62.25 14625
User does not exist.

Error ID
ERR_VCS_INVALIDUSER

Error name
VCS_INVALIDUSER

Cause
None.

Solution
None.

3.62.26 14626
The object is under control of the Version Control System, but it is not currently checked in.

Error ID
ERR_VCS_NOTCHECKEDIN

Error name
VCS_NOTCHECKEDIN

Cause
Error displayed if the user is trying to Check Out the CBT Instance when the CBT is checked out.

Solution
The CBT Parent object must be checked in before the instance or both the objects can be checked in together.
Check in the CBT before trying to undo check out the instance.

3.62.27 14627
The object is not checked out.

Error ID
ERR_VCS_NOTCHECKEDOUT

1557
3 ERROR CODES

Error name
VCS_NOTCHECKEDOUT

Cause
Error displayed if the User is trying to Check In an object when it is already checked in.

Solution
None - Object is already checked in. If user is trying to do an undo check out, it is already done. If user wants to
make sure their changes are to be checked in, they can check out the CBT and check it back in.

3.62.28 14628
The object is referenced by some other object.

Error ID
ERR_VCS_REFERENCED

Error name
VCS_REFERENCED

Cause
None.

Solution
None.

3.62.29 14629
The name is the same as an object in the Version Control System with a status of deleted from tree.

Error ID
ERR_VCS_NAMEISDELETED

Error name
VCS_NAMEISDELETED

Cause
None.

Solution
None.

3.62.30 14630
The object is under control of the Version Control System and cannot be renamed.

Error ID
ERR_VCS_CANNOTRENAME

1558 www.honeywell.com
 3 ERROR CODES

Error name
VCS_CANNOTRENAME

Cause
None.

Solution
None.

3.62.31 14631
The user requesting the action is not the same user that checked it out.

Error ID
ERR_VCS_NOTSAMEUSER

Error name
VCS_NOTSAMEUSER

Cause
None.

Solution
None.

3.62.32 14632
The object version is not in a qualification state that permits loading.

Error ID
ERR_VCS_NOLOADSTATE

Error name
VCS_NOLOADSTATE

Cause
None.

Solution
None.

3.62.33 14633
The user does not have privilege for the requested action.

Error ID
ERR_VCS_NOPRIVILEGE

1559
3 ERROR CODES

Error name
VCS_NOPRIVILEGE

Cause
Trying to perform an operation that requires a higher access privilege.

Solution
Be sure you have logged on with appropriate access level to perform the intended operation. For example, only
the user who has checked out and object can perform the Undo Checkout function for the object. Or, a user with
Administrator privilege (with MNGR security level) can overwrite.

3.62.34 14634
Cannot open the input file.

Error ID
ERR_VCS_CANNOTOPENFILE

Error name
VCS_CANNOTOPENFILE

Cause
None.

Solution
None.

3.62.35 14635
Cannot create or write to the output file.

Error ID
ERR_VCS_CANNOTCREATEFILE

Error name
VCS_CANNOTCREATEFILE

Cause
None.

Solution
None.

3.62.36 14636
Cannot locate the specified file.

1560 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_VCS_FILEDOESNOTEXIST

Error name
VCS_FILEDOESNOTEXIST

Cause
None.

Solution
None.

3.62.37 14637
File access error.

Error ID
ERR_VCS_FILEACCESS

Error name
VCS_FILEACCESS

Cause
None.

Solution
None.

3.62.38 14638
The input file is not well-formed XML.

Error ID
ERR_VCS_INVALIDXML

Error name
VCS_INVALIDXML

Cause
None.

Solution
None.

3.62.39 14639
The label name already exists.

1561
3 ERROR CODES

Error ID
ERR_VCS_LABELEXISTS

Error name
VCS_LABELEXISTS

Cause
None.

Solution
None.

3.62.40 14640
The label does not exist.

Error ID
ERR_VCS_INVALIDLABEL

Error name
VCS_INVALIDLABEL

Cause
None.

Solution
None.

3.62.41 14641
The label has changed from what was originally supplied.

Error ID
ERR_VCS_LABELCHANGED

Error name
VCS_LABELCHANGED

Cause
None.

Solution
None.

3.62.42 14642
The label is applied to another version of the object.

1562 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_VCS_LABELONVERSION

Error name
VCS_LABELONVERSION

Cause
None.

Solution
None.

3.62.43 14643
The type of report specified is not supported.

Error ID
ERR_VCS_INVALIDREPORT

Error name
VCS_INVALIDREPORT

Cause
None.

Solution
None.

3.62.44 14644
An error was detected by the Crystal Reports engine.

Error ID
ERR_VCS_REPORTENGINE

Error name
VCS_REPORTENGINE

Cause
None.

Solution
None.

3.62.45 14645
The object does not exist in the monitor tree.

1563
3 ERROR CODES

Error ID
ERR_VCS_NOMONITOR

Error name
VCS_NOMONITOR

Cause
None.

Solution
None.

3.62.46 14646
Could not create query.

Error ID
ERR_VCS_QUERY

Error name
VCS_QUERY

Cause
None.

Solution
None.

3.62.47 14647
Too many version files.

Error ID
ERR_VCS_TOOMANYFILES

Error name
VCS_TOOMANYFILES

Cause
None.

Solution
None.

3.62.48 14648
Memory allocation error.

1564 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_VCS_NOMEMORY

Error name
VCS_NOMEMORY

Cause
None.

Solution
None.

3.62.49 14649
Generic Version Control System Error.

Error ID
ERR_VCS_GENERICERROR

Error name
VCS_GENERICERROR

Solution
None.

Cause
None.

Solution
None.

3.62.50 14650
The qualification state name already exists.

Error ID
ERR_VCS_BADSTATENAME

Error name
VCS_BADSTATENAME

Cause
None.

Solution
None.

1565
3 ERROR CODES

3.62.51 14651
Invalid fallback state.

Error ID
ERR_VCS_BADFALLBACK

Error name
VCS_BADFALLBACK

Cause
None.

Solution
None.

3.62.52 14652
Invalid restricted state.

Error ID
ERR_VCS_BADRESTRICTED

Error name
VCS_BADRESTRICTED

Cause
None.

Solution
None.

3.62.53 14653
Qualification state definition has changed.

Error ID
ERR_VCS_STATECHANGED

Error name
VCS_STATECHANGED

Cause
None.

Solution
None.

1566 www.honeywell.com
 3 ERROR CODES

3.62.54 14654
Failed on call to HSCCLI.

Error ID
ERR_VCS_HSCCLI

Error name
VCS_HSCCLI

Cause
None.

Solution
None.

3.62.55 14655
VL not connected to Experion PKS Server.

Error ID
ERR_VCS_SCANNOTCONNECTED

Error name
VCS_SCANNOTCONNECTED

Cause
None.

Solution
None.

3.62.56 14656
Breaking relation with a user template is required.

Error ID
ERR_VCS_BREAKREQUIRED

Error name
VCS_BREAKREQUIRED

Cause
None.

Solution
None.

1567
3 ERROR CODES

3.62.57 14657
User must choose to keep or break user template connection.

Error ID
ERR_VCS_KEEPORBREAK

Error name
VCS_KEEPORBREAK

Cause
None.

Solution
None.

3.62.58 14658
QVCS Database not available (primary not master).

Error ID
ERR_VCS_NOTAVAILABLE

Error name
VCS_NOTAVAILABLE

Cause
None.

Solution
None.

3.62.59 14659
User template parent of <name> not in QVCS.

Error ID
ERR_VCS_PARENTNOTINVCS_EX

Error name
VCS_PARENTNOTINVCS

Cause
None.

Solution
None.

1568 www.honeywell.com
 3 ERROR CODES

3.62.60 14660
User template parent of <name> not checked in.

Error ID
ERR_ VCS_PARENTNOTCHECKEDIN_EX

Error name
VCS_PARENTNOTCHECKEDIN

Cause
The <named> CBT does not exist in the Library.

Solution
None.

3.62.61 14661
Import of <name> failed.

Error ID
ERR_VCS_IMPORTFAILED_EX

Error name
VCS_IMPORTFAILED

Cause
None.

Solution
None.

3.62.62 14662
<name> deleted while under QVCS control, use revert instead of import.

Error ID
ERR_VCS_IMPORTNOTALLOWED_EX

Error name
VCS_IMPORTNOTALLOWED

Cause
None.

Solution
None.

1569
3 ERROR CODES

3.62.63 14663
Comment is too long.

Error ID
ERR_VCS_COMMENTTOOLONG

Error name
VCS_COMMENTTOOLONG

Cause
None.

Solution
None.

3.62.64 14664
Revert label is too long or empty.

Error ID
ERR_VCS_LABELTOOLONG

Error name
VCS_LABELTOOLONG

Cause
None.

Solution
None.

3.62.65 14665
Qualification state is too long or empty.

Error ID
ERR_VCS_STATETOOLONG

Error name
VCS_STATETOOLONG

Cause
None.

Solution
None.

1570 www.honeywell.com
 3 ERROR CODES

3.62.66 14666
Maximum number of qualification states have been configured.

Error ID
ERR_VCS_MAXQUALSTATES

Error name
VCS_MAXQUALSTATES

Cause
None.

Solution
None.

3.62.67 14667
Cannot export <name>, the QVCS is locked.

Error ID
ERR_VCS_NOEXPVCSLOCKED_EX

Error name
VCS_NOEXPVCSLOCKED

Cause
None.

Solution
None.

3.62.68 14668
Cannot export, <name> locked by QVCS.

Error ID
ERR_VCS_NOEXPOBJECTLOCKED_EX

Error name
VCS_NOEXPOBJECTLOCKED

Cause
None.

Solution
None.

1571
3 ERROR CODES

3.62.69 14669
Locked by QVCS (check in, checkout, or revert).

Error ID
ERR_VCS_OBJECTLOCKEDBYVCS

Error name
VCS_OBJECTLOCKEDBYVCS

Cause
None.

Solution
None.

3.62.70 14670
Object must be checked out to revert user template.

Error ID
ERR_VCS_CHECKOUTREQUIRED

Error name
VCS_CHECKOUTREQUIRED

Cause
None.

Solution
None.

3.62.71 14671
<name> (derivation child) not checked out, must be in import list.

Error ID
ERR_VCS_NOTINIMPORTLIST_EX

Error name
VCS_NOTINIMPORTLIST

Cause
None.

Solution
None.

1572 www.honeywell.com
 3 ERROR CODES

3.62.72 14672
<name> is under control of the QVCS, but is not currently checked in.

Error ID
ERR_VCS_NOTCHECKEDIN_EX

Error name
VCS_NOTCHECKEDIN

Cause
None.

Solution
None.

3.62.73 14673
The user does not have privilege for the requested action on <name>.

Error ID
ERR_VCS_NOPRIVILEGE_EX

Error name
VCS_NOPRIVILEGE

Cause
None.

Solution
None.

3.62.74 14674
The user requesting the action is not the same user that checked out <name>.

Error ID
ERR_VCS_NOTSAMEUSER_EX

Error name
VCS_NOTSAMEUSER

Cause
None.

Solution
None.

1573
3 ERROR CODES

3.62.75 14675
<name> is already locked.

Error ID
ERR_VCS_OBJECTLOCKED_EX

Error name
VCS_OBJECTLOCKED

Cause
None.

Solution
None.

3.62.76 14676
Label <name> has changed from what was originally supplied.

Error ID
ERR_VCS_LABELCHANGED_EX

Error name
VCS_LABELCHANGED

Cause
None.

Solution
None.

3.62.77 14677
<name> does not exist in QVCS.

Error ID
ERR_VCS_INVALIDOBJECT_EX

Error name
VCS_INVALIDOBJECT

Cause
None.

Solution
None.

1574 www.honeywell.com
 3 ERROR CODES

3.62.78 14678
<name> is not checked out.

Error ID
ERR_VCS_NOTCHECKEDOUT_EX

Error name
VCS_NOTCHECKEDOUT

Cause
None.

Solution
None.

3.62.79 14679
Transaction aborted for <name>.

Error ID
ERR_VCS_TRANSABORTED_EX

Error name
VCS_TRANSABORTED

Cause
None.

Solution
None.

3.62.80 14680
Elec. Sign failed - timeout, retries exceeded, invalid user/password, or no privilege.

Error ID
ERR_VCS_ELECSIGNFAIL

Error name
VCS_ELECSIGNFAIL

Cause
None.

Solution
None.

1575
3 ERROR CODES

3.62.81 14681
Elec. Sign failed - timeout, retries exceeded, invalid user/password, or no privilege for <name>.

Error ID
ERR_VCS_ELECSIGNFAIL_EX

Error name
VCS_ELECSIGNFAIL

Cause
None.

Solution
None.

3.62.82 14682
Version does not exist for <name>.

Error ID
ERR_VCS_INVALIDVERSION_EX

Error name
VCS_INVALIDVERSION

Cause
None.

Solution
None.

3.62.83 14683
Qualification state does not exist for <name>.

Error ID
ERR_VCS_INVALIDQUAL_EX

Error name
VCS_INVALIDQUAL

Cause
None.

Solution
None.

1576 www.honeywell.com
 3 ERROR CODES

3.62.84 14684
Object is deleted from tree, cannot perform requested operation.

Error ID
ERR_VCS_NOTVALIDFORDELETED

Error name
VCS_NOTVALIDFORDELETED

Cause
None.

Solution
None.

3.62.85 14685
Criteria for restricted signature were not met.

Error ID
ERR_VCS_RESTRICTEDSIGN

Error name
VCS_RESTRICTEDSIGN

Cause
None.

Solution
None.

3.62.86 14686
Requested migrate state equal to existing migrate state

Error ID
ERR_VCS_SETMIGRATE

Error name
VCS_SETMIGRATE

Cause
None.

Solution
None.

1577
3 ERROR CODES

3.62.87 14687
Migrate is not in progress

Error ID
ERR_VCS_NOMIGRATE

Error name
VCS_NOMIGRATE

Cause
None.

Solution
None.

3.62.88 14688
Cannot revert since name already exists for different object.

Error ID
ERR_VCS_NAMEEXISTS

Error name
VCS_NAMEEXISTS

Cause
None.

Solution
None.

3.62.89 14689
Cannot load because the other parent of a block in the object to be loaded is not checked in.

Error ID
ERR_VCS_OTHERPARENTNOTCHECKEDIN

Error name
VCS_OTHERPARENTNOTCHECKEDIN

Cause
None.

Solution
None.

1578 www.honeywell.com
 3 ERROR CODES

3.62.90 14690
Object contains a CAB/CDB type.

Error ID
ERR_VCS_CABCHECKIN

Error name
VCS_CABCHECKIN

Cause
None.

Solution
None.

3.62.91 14691
The Custom Block Type cannot be deleted since one or more object in the QVCS contains an instance of it.

Error ID
ERR_VCS_CABNODELETE

Error name
VCS_CABNODELETE

Cause
None.

Solution
None.

3.62.92 14692
The Custom Block Type cannot be renamed since one or more object in the QVCS contains an instance of it.

Error ID
ERR_VCS_CABNORENAME

Error name
VCS_CABNORENAME

Cause
None.

Solution
None.

1579
3 ERROR CODES

3.62.93 14693
The CAB/CDB type name must include the library name (that is, Libname:Typename)

Error ID
ERR_VCS_CABBADNAME

Error name
VCS_CABBADNAME

Cause
None.

Solution
None.

3.62.94 14694
The Custom Block Type cannot be edited since one or more object in the QVCS contains an instance of it.

Error ID
ERR_VCS_CABNOEDIT

Error name
VCS_CABNOEDIT

Cause
None.

Solution
None.

3.62.95 14695
The Library cannot be renamed since one or more object in the QVCS contains an instance of it.

Error ID
ERR_VCS_CABNOLIBRENAME

Error name
VCS_CABNOLIBRENAME

Cause
None.

Solution
None.

1580 www.honeywell.com
 3 ERROR CODES

3.62.96 14696
Cannot delete because the other parent of a block to be deleted is not checked out.

Error ID
ERR_VCS_OTHERPARENTNOTCHECKEDOUT

Error name
VCS_ OTHERPARENTNOTCHECKEDOUT

Cause
None.

Solution
None.

3.62.97 14697
A full user name must exist for certain QVCS functions to be allowed

Error ID
ERR_VCS_NOFULLUSERNAME

Error name
VCS_NOFULLUSERNAME

Cause
VCS requires a full user name for the user ID for this function.

Solution
Enter a full name for the user ID via Windows user account management or Station User Configuration,
whichever is appropriate.

3.62.98 14698
The assignment parent of a block in an object being checked out or reverted is not checked out.

Error ID
ERR_VCS_ASSIGNPARENTNOTCHECKEDOUT

Error name
VCS_ASSIGNPARENTNOTCHECKEDOUT

Cause
VCS requires assignment parent block to be also checked out.

1581
3 ERROR CODES

Solution
Check out assignment parent block.

3.62.99 14699
Undo check out is not allowed if there is a user supplied transaction ID

Error ID
ERR_VCS_NOUNDOWITHTRANSID

Error name
VCS_NOUNDOWITHTRANSID

Cause
None.

Solution
None.

1582 www.honeywell.com
 3 ERROR CODES

3.63 Codes 14700 to 14721

Related topics
“14700” on page 1583
“14701” on page 1583
“14702” on page 1584
“14703” on page 1584
“14704” on page 1584
“14705” on page 1585
“14706” on page 1585
“14707” on page 1585
“14708” on page 1586
“14709” on page 1586
“14710” on page 1586
“14711” on page 1587
“14712” on page 1587
“14713” on page 1587
“14714” on page 1588
“14715” on page 1588
“14716” on page 1589
“14717” on page 1589
“14718” on page 1589
“14719” on page 1590
“14720” on page 1590
“14721” on page 1590

3.63.1 14700
Check out or revert of a non-current version is not allowed if there is a user supplied transaction ID

Error ID
ERR_VCS_NCVERSIONWITHTRANSID

Error name
VCS_NCVERSIONWITHTRANSID

Cause
None.

Solution
None.

3.63.2 14701
An error was encountered during compression of file (during check in)

1583
3 ERROR CODES

Error ID
ERR_VCS_COMPRESSFILE

Error name
VCS_COMPRESSFILE

Cause
None.

Solution
None.

3.63.3 14702
An error is encountered during expansion of file for operation such as check out, revert, retrieve, and so on.

Error ID
ERR_VCS_EXPANDFILE

Error name
VCS_EXPANDFILE

Cause
None.

Solution
None.

3.63.4 14703
User not member of an approved group for this action

Error ID
ERR_VCS_SIGNGROUP

Error name
VCS_SIGNGROUP

Cause
None.

Solution
None.

3.63.5 14704
User is not member of an approved group for this action (includes object name)

1584 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_VCS_SIGNGROUP_EX

Error name
VCS_SIGNGROUP_EX

Cause
None.

Solution
None.

3.63.6 14705
Invalid specification for action

Error ID
ERR_VCS_SIGNINVALID

Error name
VCS_SIGNINVALID

Cause
None.

Solution
None.

3.63.7 14706
Invalid specification for action (includes object name)

Error ID
ERR_VCS_SIGNINVALID_EX

Error name
VCS_SIGNINVALID_EX

Cause
None.

Solution
None.

3.63.8 14707
Qual trans is not allowed

1585
3 ERROR CODES

Error ID
ERR_VCS_QUALTRANNOTALLOWED

Error name
VCS_QUALTRANNOTALLOWED

Cause
None.

Solution
None.

3.63.9 14708
Qual trans is not allowed (includes object name)

Error ID
ERR_VCS_QUALTRANNOTALLOWED_EX

Error name
VCS_QUALTRANNOTALLOWED_EX

Cause
None.

Solution
None.

3.63.10 14709
Custom Block Type <LibraryName:CBTName>used by <Object Name> is not in QVCS.

Error ID
ERR_VCS_CBTNOTINVCS

Error name
VCS_CBTNOTINVCS

Cause
Error encountered during check-in of a CBT instance when the CBT is not in QVCS.

Solution
The CBT Parent object must be checked in before the instance or both the objects can be checked in together.

3.63.11 14710
Custom Block Type <LibraryName: CBTName> used by <Object Name> not checked in.

1586 www.honeywell.com
 3 ERROR CODES

Error ID
ERR_VCS_CBTNOTCHECKEDIN

Error name
VCS_CBTNOTCHECKEDIN

Cause
Error encountered during check-in of a CBT instance while the CBT is checked-out.

Solution
The CBT Parent object must be checked in before the instance or both the objects can be checked in together.

3.63.12 14711
Cannot check out version <number> of <LibraryName:CBTName>because it is lower than the version
(<number>) in the library.

Error ID
ERR_VCS_CBTLOWERVERSION

Error name
VCS_CBTLOWERVERSION

Cause
Error encountered during check-out of a non-current version of CBT less than the current version.

Solution
Retrieve the earlier version of the CBT and import it creating a new CBT.

3.63.13 14712
<Object Name> uses <LibraryName:CBTName> and it must be checked in before checking out.

Error ID
ERR_VCS_CHILDNOTCHECKEDIN

Error name
VCS_CHILDNOTCHECKEDIN

Cause
Error encountered during check-out of a CBT while CBT instance is checked-out.

Solution
Check in the CBT instance first and then check out the CBT.

3.63.14 14713
<Object Name> requires at least Version <number> of <LibraryName: CBTName> to be in the library .

1587
3 ERROR CODES

Error ID
ERR_VCS_CBTVERMUSTBEGREATER

Error name
VCS_CBTVERMUSTBEGREATER

Cause
Error encountered when object contains a CBT instance whose version is not in library and whose version
dependency is greater than version of the CBT in the library tree.

Solution
Need to perform revert of CBT to get the required version of the CBT into the library.

3.63.15 14714
Cannot revert to version <number> of <LibraryName:CBTName>because it is lower than the version
(<number>) in the library.

Error ID
ERR_VCS_CBTCHILDISLOADED

Error name
VCS_CBTCHILDISLOADED

Cause
Error encountered during revert of CBT to a lower version than its loaded instance requires.

Solution
Delete the instances from the monitoring side in order to revert the CBT.

3.63.16 14715
Cannot revert to <LibraryName:CBTName> because it has instances in the project and/or library that requires
the current version.

Error ID
ERR_VCS_REVERTNOTCONSISTENT

Error name
ERR_VCS_REVERTNOTCONSISTENT

Cause
Attempt to revert a UDT or CBT that is not consistent with the version required by the instances in the project
and library.

Solution
Delete the instances and then perform the revert operation, or perform a retrieve of the selected version, and
then import it to create a new UDT/CBT. Then perform a change parent (if required) of the instances.

1588 www.honeywell.com
 3 ERROR CODES

3.63.17 14716
Cannot revert version <number> of <Object Name> because it requires version <number> of
<LibraryName:CBTName> and it does not exist in the library.

Error ID
ERR_VCS_PARENTNOTINLIBRARY

Error name
ERR_VCS_PARENTNOTINLIBRARY

Cause
This error is encountered while reverting a UDT or CBT instance whose version is not in library or in the list of
objects to revert.

Solution
Need to perform revert of UDT or CBT to get it back into the library, and then perform the revert of the
instance.

3.63.18 14717
Cannot undo check out to the version of the parameter because it requires the version of the parameter and it
does not exist in the library.

Error ID
ERR_VCS_UNDOPARENTNOTINLIBRARY

Error name
ERR_VCS_UNDOPARENTNOTINLIBRARY

Cause
A UDT or CBT with instances is checked out and then attempts to undo check out on an instance after the
UDT/CBT is checked in.

Solution
You cannot perform undo check out on an instance that was checked out with the UDT or CBT.

3.63.19 14718
Cannot retrieve existing file without overwriting it.

Error ID
ERR_VCS_FILEEXISTS

Error name
VCS_FILEEXISTS

1589
3 ERROR CODES

Cause
Error encountered during retrieve when the file already exists and overwrite is not specified.

Solution
Need to overwrite existing file.

3.63.20 14719
Object is not in ERDB.

Error ID
ERR_VCS_OBJECTNOTINERDB

Error name
VCS_OBJECTNOTINERDB

Cause
Object has been deleted from the ERDB between the last time the list of objects displayed in QVCS manager
has been refreshed and the time of this operation.

Solution
Refresh QVCS manager and try again.

3.63.21 14720
QVCS operations may not be performed on phase types or templates that have been used as an SCM DATA
block. Recipe Builder does not allow changes that can affect an SCM.

Error ID
ERR_VCS_PHASE_BLOCK_IN_SCM

Error name
ERR_VCS_PHASE_BLOCK_IN_SCM

Cause
A phase type or a template cannot be edited if the type is used as an SCM DATA block. Recipe Builder does not
allow changes that can affect an SCM.

Solution
Modify the phase type or template from the Control Builder.

3.63.22 14721
The (derivation child) is not checked out. It must be checked out for the import to be successful.

Error ID
ERR_VCS_DERIVED_NOT_CHECKOUT_EX

1590 www.honeywell.com
 3 ERROR CODES

Error name
VCS_DERIVEDCHECKOUT

Cause
During import of a CBT or a UDT, if the derived children are not checked out, then the import of CBT or UDT
does not succeed.

Solution
Checkout the derived children and then import the CBT or UDT again.

1591
3 ERROR CODES

3.64 Codes 15251 to 15299

Related topics
“15251” on page 1593
“15252” on page 1593
“15253” on page 1593
“15254” on page 1594
“15255” on page 1594
“15256” on page 1594
“15257” on page 1595
“15258” on page 1595
“15259” on page 1595
“15260” on page 1596
“15261” on page 1596
“15262” on page 1596
“15263” on page 1597
“15264” on page 1597
“15265” on page 1597
“15266” on page 1598
“15267” on page 1598
“15268” on page 1598
“15269” on page 1599
“15270” on page 1599
“15271” on page 1599
“15272” on page 1600
“15273” on page 1600
“15274” on page 1600
“15275” on page 1601
“15276” on page 1601
“15277” on page 1601
“15278” on page 1602
“15279” on page 1602
“15280” on page 1602
“15281” on page 1603
“15282” on page 1603
“15283” on page 1603
“15284” on page 1604
“15285” on page 1604
“15286” on page 1604
“15287” on page 1605
“15288” on page 1605
“15289” on page 1605
“15290” on page 1606
“15291” on page 1606
“15292” on page 1606
“15293” on page 1607
“15294” on page 1607

1592 www.honeywell.com
 3 ERROR CODES

“15295” on page 1607

“15296” on page 1608
“15297” on page 1608
“15298” on page 1608
“15299” on page 1609

3.64.1 15251
Connection time out error

Error ID
ERR_CHKPNT_UNDEFINED_ERROR

Error name
CHKPNT_UNDEFINED_ERROR

Cause
Checkpoint service is not running on the primary server or dependent services may not be running on the
primary. If you are operating from the console/flex/secondary server, then there may be a problem in the
network connection to the primary server.

Solution
Start chkptservice.exe (checkpoint service) from service control manager (type services.msc at run command) if
the chkptservice is not running. Resolve the network connection issues if there is a network issue between the
primary server and other server/console/flex.

3.64.2 15252
Periodic checkpoint save failed - Entity is not accessible

Error ID
ERR_CHKPNT_AUTO_SAVE_FAILED

Error name
CHKPNT_AUTO_SAVE_FAILED

Cause
None.

Solution
None.

3.64.3 15253
Manual checkpoint save failed - Entity is not accessible

Error ID
ERR_CHKPNT_MANL_SAVE_FAILED

1593
3 ERROR CODES

Error name
CHKPNT_MANL_SAVE_FAILED

Cause
None.

Solution
None.

3.64.4 15254
Checkpoint restore failed - Entity is not accessible

Error ID
ERR_CHKPNT_RESTORE_FAILED

Error name
CHKPNT_RESTORE_FAILED

Cause
None.

Solution
None.

3.64.5 15255
Periodic checkpoint save on entity failed - path not accessible, or insufficient storage space

Error ID
ERR_CHKPNT_NO_DISKSPACE

Error name
CHKPNT_NO_DISKSPACE

Cause
None.

Solution
None.

3.64.6 15256
Manual checkpoint save on entity failed - path not accessible, or insufficient storage space

Error ID
ERR_CHKPNT_INVALID_SAVE_PATH

1594 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_INVALID_SAVE_PATH

Cause
None.

Solution
None.

3.64.7 15257
Checkpoint restore on entity failed - path not accessible, or insufficient storage space

Error ID
ERR_CHKPNT_INVALID_RESTORE_PATH

Error name
CHKPNT_INVALID_RESTORE_PATH

Cause
None.

Solution
None.

3.64.8 15258
Checkpoint file failed to be replicated to backup server.

Error ID
ERR_CHKPNT_BKP_REPLICTION_FAILED

Error name
CHKPNT_BKP_REPLICTION_FAILED

Cause
None.

Solution
None.

3.64.9 15259
Checkpoint file failed to be replicated to console station

Error ID
ERR_CHKPNT_CON_REPLICTION_FAILED

1595
3 ERROR CODES

Error name
CHKPNT_CON_REPLICTION_FAILED

Cause
None.

Solution
None.

3.64.10 15260
Checkpoint file at path is corrupted.

Error ID
ERR_CHKPNT_FILE_PATH_CORRUPTED

Error name
CHKPNT_FILE_PATH_CORRUPTED

Cause
None.

Solution
None.

3.64.11 15261
Checkpoint restore not permitted - Checkpoint file for the entity is corrupted

Error ID
ERR_CHKPNT_FILE_CORRUPTED

Error name
CHKPNT_FILE_CORRUPTED

Cause
None.

Solution
None.

3.64.12 15262
Checkpoint restore not permitted - File at path is incompatible with target entity's block structure

Error ID
ERR_CHKPNT_FILE_INCOMPATIBLE

1596 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_FILE_INCOMPATIBLE

Cause
None.

Solution
None.

3.64.13 15263
Checkpoint restore not permitted for entity. Target block is incompatible with the block in checkpoint file.

Error ID
ERR_CHKPNT_ENTITY_INCOMPATIBLE

Error name
DEFXML_GENERIC

Cause
None.

Solution
None.

3.64.14 15264
Failed to write summary tab information.

Error ID
ERR_CHKPNT_SMRYTAB_WRITE_FAILED

Error name
CHKPNT_SMRYTAB_WRITE_FAILED

Cause
None.

Solution
None.

3.64.15 15265
Failed to read summary tab Information

Error ID
ERR_CHKPNT_SMRYTAB_READ_FAILED

1597
3 ERROR CODES

Error name
CHKPNT_SMRYTAB_READ_FAILED

Cause
None.

Solution
None.

3.64.16 15266
File compression failed.

Error ID
ERR_CHKPNT_COMPRESION_FAILED

Error name
CHKPNT_COMPRESION_FAILED

Cause
None.

Solution
None.

3.64.17 15267
File extraction failed.

Error ID
ERR_CHKPNT_EXTRACTION_FAILED

Error name
CHKPNT_EXTRACTION_FAILED

Cause
None.

Solution
None.

3.64.18 15268
File not found.

Error ID
ERR_CHKPNT_FILE_NOT_FOUND

1598 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.64.19 15269
File corrupted - CRC mismatch.

Error ID
ERR_CHKPNT_CRC_MISMATCH

Error name
CHKPNT_CRC_MISMATCH

Cause
None.

Solution
None.

3.64.20 15270
File operation failed

Error ID
ERR_CHKPNT_FILE_OPRN_FAILED

Error name
CHKPNT_FILE_OPRN_FAILED

Cause
None.

Solution
None.

3.64.21 15271
Invalid path

Error ID
ERR_CHKPNT_INVALID_PATH

1599
3 ERROR CODES

Error name
CHKPNT_INVALID_PATH

Cause
None.

Solution
None.

3.64.22 15272
Checkpoint schedule overrun, name of task overrunning is the name of the entity.

Error ID
ERR_CHKPNT_SCHEDULE_OVERRUN

Error name
CHKPNT_SCHEDULE_OVERRUN

Cause
None.

Solution
None.

3.64.23 15273
Checkpoint schedule overrun, entity is taking to long to save.

Error ID
ERR_CHKPNT_LONG_SAVE

Error name
CHKPNT_LONG_SAVE

Cause
None.

Solution
None.

3.64.24 15274
QVCS licensed found: All periodic schedule tasks reverting to saving only single most recent checkpoint file.

Error ID
ERR_CHKPNT_QVCS_LICENCE_FOUND

1600 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_QVCS_LICENCE_FOUND

Cause
None.

Solution
None.

3.64.25 15275
Checkpoint restarted due to server failover.

Error ID
ERR_CHKPNT_SERVER_RESTARTED

Error name
CHKPNT_SERVER_RESTARTED

Cause
None.

Solution
None.

3.64.26 15276
Registry Read Failed

Error ID
ERR_CHKPNT_REGISTRY_READ_FAILED

Error name
CHKPNT_REGISTRY_READ_FAILED

Cause
None.

Solution
None.

3.64.27 15277
Registry Write Failed

Error ID
ERR_CHKPNT_REGISTRY_WRITE_FAILED

1601
3 ERROR CODES

Error name
CHKPNT_REGISTRY_WRITE_FAILED

Cause
None.

Solution
None.

3.64.28 15278
Manual checkpoint save operation not permitted - Restarting due to server failover.

Error ID
ERR_CHKPNT_MANL_SAVE_INVALID

Error name
CHKPNT_MANL_SAVE_INVALID

Cause
None.

Solution
None.

3.64.29 15279
Checkpoint shutting down.

Error ID
ERR_CHKPNT_SHUTTING_DOWN

Error name
CHKPNT_SHUTTING_DOWN

Cause
None.

Solution
None.

3.64.30 15280
Manual checkpoint restore not permitted - Entity is in invalid state.

Error ID
ERR_CHKPNT_EE_STATE_INVALID

1602 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_EE_STATE_INVALID

Cause
None.

Solution
None.

3.64.31 15281
Manual checkpoint restore not permitted - Entity is locked out.

Error ID
ERR_CHKPNT_MANL_RESTORE_ENTITY_LOCKED

Error name
CHKPNT_MANL_RESTORE_ENTITY_LOCKED

Cause
None.

Solution
None.

3.64.32 15282
Manual checkpoint restore not permitted - Entity has another Load / Restore in progress.

Error ID
ERR_CHKPNT_RESTORE_IN_PROGRESS

Error name
CHKPNT_RESTORE_IN_PROGRESS

Cause
None.

Solution
None.

3.64.33 15283
Manual checkpoint save cancelled on entity.

Error ID
ERR_CHKPNT_MANL_SAVE_CANCELLED

1603
3 ERROR CODES

Error name
CHKPNT_MANL_SAVE_CANCELLED

Cause
None.

Solution
None.

3.64.34 15284
Checkpoint restore cancelled on entity

Error ID
ERR_CHKPNT_RESTORE_CANCELLED

Error name
CHKPNT_RESTORE_CANCELLED

Cause
None.

Solution
None.

3.64.35 15285
Checkpoint archive cancelled on entity: File is discarded

Error ID
ERR_CHKPNT_ARCHIVE_CANCELLED

Error name
CHKPNT_ARCHIVE_CANCELLED

Cause
None.

Solution
None.

3.64.36 15286
Checkpoint being Aborted - necessary operating files not found in SR.

Error ID
ERR_CHKPNT_SR_FILES_NOT_FOUND

1604 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_SR_FILES_NOT_FOUND

Cause
None.

Solution
None.

3.64.37 15287
Checkpoint being aborted - necessary operating files not found in cache.

Error ID
ERR_CHKPNT_CACHE_FILES_NOT_FOUND

Error name
CHKPNT_CACHE_FILES_NOT_FOUND

Cause
None.

Solution
None.

3.64.38 15288
Checkpoint being aborted - needed services are no longer running.

Error ID
ERR_CHKPNT_SERVICE_NOT_RUNNING

Error name
CHKPNT_SERVICE_NOT_RUNNING

Cause
None.

Solution
None.

3.64.39 15289
Manual checkpoint save not permitted - access denied.

Error ID
ERR_CHKPNT_MANL_SAVE_ACCESS_DENIED

1605
3 ERROR CODES

Error name
CHKPNT_MANL_SAVE_ACCESS_DENIED

Cause
None.

Solution
None.

3.64.40 15290
Checkpoint restore not permitted - access denied

Error ID
ERR_CHKPNT_RESTORE_ACCESS_DENIED

Error name
CHKPNT_RESTORE_ACCESS_DENIED

Cause
None.

Solution
None.

3.64.41 15291
Checkpoint archiving not permitted - access denied

Error ID
ERR_CHKPNT_ARCHIVE_ACCESS_DENIED

Error name
CHKPNT_ARCHIVE_ACCESS_DENIED

Cause
None.

Solution
None.

3.64.42 15292
Creation of checkpoint attribute file failed.

Error ID
ERR_CHKPNT_CREATE_ATTR_FAILED

1606 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_CREATE_ATTR_FAILED

Cause
None.

Solution
None.

3.64.43 15293
Failed to open the checkpoint file for the entity.

Error ID
ERR_CHKPNT_FILE_OPEN_FAILED

Error name
CHKPNT_FILE_OPEN_FAILED

Cause
None.

Solution
None.

3.64.44 15294
The list of TLHPE names could not be obtained from SR.

Error ID
ERR_CHKPNT_TLHPE_LIST_FAIL

Error name
CHKPNT_TLHPE_LIST_FAIL

Cause
None.

Solution
None.

3.64.45 15295
Failed to save checkpoint file.

Error ID
ERR_CHKPNT_SAVE_FAIL

1607
3 ERROR CODES

Error name
CHKPNT_SAVE_FAIL

Cause
None.

Solution
None.

3.64.46 15296
Couldn't access CtrlSession

Error ID
ERR_CHKPNT_NOCTRLSESS

Error name
CHKPNT_NOCTRLSESS

Cause
None.

Solution
None.

3.64.47 15297
Coudn't access Sysrep for information

Error ID
ERR_CHKPNT_SR_ACCESS_FAIL

Error name
CHKPNT_SR_ACCESS_FAIL

Cause
None.

Solution
None.

3.64.48 15298
Failed to connect to server

Error ID
ERR_CHKPNT_CONNECT_TO_SERVER_FAILED

1608 www.honeywell.com
 3 ERROR CODES

Error name
CHKPNT_CONNECT_TO_SERVER_FAILED

Cause
None.

Solution
None.

3.64.49 15299
Failed to disconnect from server.

Error ID
ERR_CHKPNT_DISCON_FROM_SERVER_FAILED

Error name
CHKPNT_DISCON_FROM_SERVER_FAIL

Cause
None.

Solution
None.

1609
3 ERROR CODES

3.65 Codes 15300 to 15362

Related topics
“15300” on page 1611
“15301” on page 1611
“15302” on page 1612
“15303” on page 1612
“15304” on page 1612
“15305” on page 1613
“15306” on page 1613
“15307” on page 1613
“15308” on page 1614
“15309” on page 1614
“15310” on page 1614
“15311” on page 1615
“15312” on page 1615
“15313” on page 1615
“15314” on page 1616
“15315” on page 1616
“15316” on page 1616
“15317” on page 1617
“15318” on page 1617
“15319” on page 1617
“15320” on page 1618
“15321” on page 1618
“15322” on page 1618
“15323” on page 1619
“15324” on page 1619
“15325” on page 1619
“15326” on page 1620
“15327” on page 1620
“15328” on page 1620
“15329” on page 1621
“15330” on page 1621
“15331” on page 1621
“15332” on page 1622
“15333” on page 1622
“15334” on page 1622
“15335” on page 1623
“15336” on page 1623
“15337” on page 1623
“15338” on page 1624
“15339” on page 1624
“15340” on page 1624
“15341” on page 1625
“15342” on page 1625
“15343” on page 1625

1610 www.honeywell.com
 3 ERROR CODES

“15344” on page 1626

“15345” on page 1626
“15346” on page 1626
“15347” on page 1627
“15348” on page 1627
“15349” on page 1627
“15350” on page 1628
“15351” on page 1628
“15352” on page 1628
“15353” on page 1629
“15354” on page 1629
“15355” on page 1629
“15356” on page 1630
“15357” on page 1630
“15358” on page 1630
“15359” on page 1631
“15360” on page 1631
“15361” on page 1631
“15362” on page 1632

3.65.1 15300
Task name cannot have invalid characters.

Error ID
ERR_CHKPNT_INVALID_TASK_NAME

Error name
CHKPNT_INVALID_TASK_NAME

Cause
None.

Solution
None.

3.65.2 15301
The specified file was not found.

Error ID
ERR_CHKPNT_UI_FILE_NOT_FOUND

Error name
CHKPNT_UI_FILE_NOT_FOUND

Cause
The specified file was not found.

1611
3 ERROR CODES

Solution
None. Ensure file exists.

3.65.3 15302
Task name exceeds the maximum length of 40 characters.

Error ID
ERR_CHKPNT_TASK_NAME_LENGTH

Error name
CHKPNT_TASK_NAME_LENGTH

Cause
None.

Solution
None.

3.65.4 15303
Version range is 1-100

Error ID
ERR_CHKPNT_VERSION_NOTINRANGE

Error name
CHKPNT_VERSION_NOTINRANGE

Cause
None.

Solution
None.

3.65.5 15304
Version should be numeric only

Error ID
ERR_CHKPNT_VERSION_NUMERIC_ONLY

Error name
CHKPNT_VERSION_NUMERIC_ONLY

Cause
None.

1612 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.6 15305
Resource string not found

Error ID
ERR_CHKPNT_RESOURCE_STR_NOT_FOUND

Error name
CHKPNT_RESOURCE_STR_NOT_FOUND

Cause
None.

Solution
None.

3.65.7 15306
Grid Initialization failed.

Error ID
ERR_CHKPNT_INITIALIZE_GRID_FAILED

Error name
CHKPNT_INITIALIZE_GRID_FAILED

Cause
None.

Solution
None.

3.65.8 15307
Invalid directory.

Error ID
ERR_CHKPNT_DIRECTORY_NOT_FOUND

Error name
CHKPNT_DIRECTORY_NOT_FOUND

Cause
None.

1613
3 ERROR CODES

Solution
None.

3.65.9 15308
Directory is not shared.

Error ID
ERR_CHKPNT_DIRECTORY_NOT_SHARED

Error name
CHKPNT_DIRECTORY_NOT_SHARED

Cause
None.

Solution
None.

3.65.10 15309
Invalid File Name

Error ID
ERR_CHKPNT_INVALID_FILENAME

Error name
DEFXML_GENERIC

Cause
None.

Solution
None.

3.65.11 15310
Failed to Connect to server.

Error ID
ERR_CHKPNT_SERVER_INIT_FAILED

Error name
DEFXML_GENERIC

Cause
None.

1614 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.12 15311
Node should be in 'IDLE' state

Error ID
ERR_CHKPNT_ENTITY_NOT_IDLE

Error name
CHKPNT_ENTITY_NOT_IDLE

Cause
None.

Solution
None.

3.65.13 15312
Not all nodes are in 'IDLE' state.

Error ID
ERR_CHKPNT_NOT_ALL_ENTITIES_IDLE

Error name
CHKPNT_NOT_ALL_ENTITIES_IDLE

Cause
None.

Solution
None.

3.65.14 15313
Inconsistency is detected. Recommended to press the Refresh button.

Error ID
ERR_CHKPNT_INCONSISTANCY_REFRESH

Error name
CHKPNT_INCONSISTANCY_REFRESH

Cause
None.

1615
3 ERROR CODES

Solution
None.

3.65.15 15314
Inconsistency is detected with this task. Recommended to delete this task.

Error ID
ERR_CHKPNT_INCONSISTANCY_DELETE

Error name
DEFXML_GENERIC

Cause
None.

Solution
None.

3.65.16 15315
Failed to create New task.

Error ID
ERR_CHKPNT_CREATE_TASK_FAILED

Error name
CHKPNT_CREATE_TASK_FAILED

Cause
None.

Solution
None.

3.65.17 15316
Failed to Edit task.

Error ID
ERR_CHKPNT_EDIT_TASK_FAILED

Error name
CHKPNT_EDIT_TASK_FAILED

Cause
None.

1616 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.18 15317
Failed to Delete task

Error ID
ERR_CHKPNT_DELETE_TASK_FAILED

Error name
CHKPNT_DELETE_TASK_FAILED

Cause
None.

Solution
None.

3.65.19 15318
Failed to start task

Error ID
ERR_CHKPNT_START_TASK_FAILED

Error name
CHKPNT_START_TASK_FAILED

Cause
None.

Solution
None.

3.65.20 15319
Failed to stop task

Error ID
ERR_CHKPNT_STOP_TASK_FAILED

Error name
CHKPNT_STOP_TASK_FAILED

Cause
None.

1617
3 ERROR CODES

Solution
None.

3.65.21 15320
Connection TimeOut

Error ID
ERR_CHKPNT_CONNECTION_TIMEOUT

Error name
CHKPNT_CONNECTION_TIMEOUT

Cause
None.

Solution
None.

3.65.22 15321
Invalid number of arguments provided.

Error ID
ERR_CHKPNT_INVALID_ARGUMENT_SIZE

Error name
CHKPNT_INVALID_ARGUMENT_SIZE

Cause
None.

Solution
None.

3.65.23 15322
Invalid removable storage used.

Error ID
ERR_CHKPNT_INVALID_REMOVEABLE_STORAGE

Error name
CHKPNT_INVALID_REMOVEABLE_STORAGE

Cause
None.

1618 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.24 15323
Insufficient Storage Space

Error ID
ERR_CHKPNT_INSUFFICIENT_STORAGE_SPACE

Error name
CHKPNT_INSUFFICIENT_STORAGE_SPACE

Cause
None.

Solution
None.

3.65.25 15324
File already exists. Overwrite the existing file?

Error ID
ERR_CHKPNT_OVERWRITE_EXISTING_FILE

Error name
CHKPNT_OVERWRITE_EXISTING_FILE

Cause
File already exists.

Solution
None.

3.65.26 15325
Checkpoint Save aborted. Incompatibility detected. Rebuild checkpoint may be inprogress.

Error ID
ERR_CHKPNT_SAVE_ABORT_REBUILD

Error name
CHKPNT_SAVE_ABORT_REBUILD

Cause
Incompatibility detected.

1619
3 ERROR CODES

Solution
None.

3.65.27 15326
Task details cannot be retrieved as the task ID is invalid.

Error ID
ERR_CHKPNT_INVALID_TASK_ID

Error name
CHKPNT_INVALID_TASK_ID

Cause
The task ID is invalid.

Solution
None.

3.65.28 15327
Unexpected exception while setting task parameters

Error ID
ERR_CHKPNT_SET_TASK_PARAMS

Error name
CHKPNT_SET_TASK_PARAMS

Cause
None.

Solution
None.

3.65.29 15328
Checkpoint file creation failed.

Error ID
ERR_CHKPNT_CREATE_FILE_FAIL

Error name
CHKPNT_CREATE_FILE_FAIL

Cause
None.

1620 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.30 15329
Controller upload failed.

Error ID
ERR_CHKPNT_UPLOAD_FAIL

Error name
CHKPNT_UPLOAD_FAIL

Cause
None.

Solution
None.

3.65.31 15330
Failed to schedule the automatic task. Could not connect to checkpoint service.

Error ID
ERR_CHKPNT_SCHEDULE_TASK_FAIL

Error name
CHKPNT_SCHEDULE_TASK_FAIL

Cause
None.

Solution
None.

3.65.32 15331
Checkpoint Save failed due to snapshot file serialize issues

Error ID
ERR_CHKPNT_SAVE_FAIL_SERIALIZE

Error name
CHKPNT_SAVE_FAIL_SERIALIZE

Cause
None.

1621
3 ERROR CODES

Solution
None.

3.65.33 15332
Access is denied.

Error ID
ERR_CHKPNT_ACCESS_DENIED

Error name
CHKPNT_ACCESS_DENIED

Cause
None.

Solution
None.

3.65.34 15333
Help is currently not available.

Error ID
ERR_CHKPNT_HELP_NOT_AVAILABLE

Error name
CHKPNT_HELP_NOT_AVAILABLE

Cause
None.

Solution
None.

3.65.35 15334
Failed to schedule the automatic task. Task already exists in NT Scheduler. Delete the existing task and re-
import.

Error ID
ERR_CHKPNT_TASK_ALREADY_SCHEDULED

Error name
CHKPNT_TASK_ALREADY_SCHEDULED

Cause
None.

1622 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.36 15335
Failed to get response from Checkpoint Service.

Error ID
ERR_CHKPNT_FAILEDOPMWIZCOMM

Error name
CHKPNT_HELP_NOT_AVAILABLE

Cause
None.

Solution
None.

3.65.37 15336
Could not get the current server state. Task related operations not permitted.

Error ID
ERR_CHKPNT_SERVERSTATE

Error name
CHKPNT_SERVERSTATE

Cause
None.

Solution
None.

3.65.38 15337
Cannot Archive on Latest checkpoint file. Unselect the LATEST checkpoint file and try again.

Error ID
ERR_CHKPNT_ARCHIVE_LATEST

Error name
CHKPNT_ARCHIVE_LATEST

Cause
None.

1623
3 ERROR CODES

Solution
None.

3.65.39 15338
Checkpoint Save Failed. Entity is locked by some other operation.

Error ID
ERR_CHKPNT_SAVE_FAIL_LOCK

Error name
CHKPNT_SAVE_FAIL_LOCK

Cause
None.

Solution
None.

3.65.40 15339
Version can be an integer value only.

Error ID
ERR_CHKPNT_VERSION_INTEGER_ONLY

Error name
CHKPNT_VERSION_INTEGER_ONLY

Cause
None.

Solution
None.

3.65.41 15340
Resource String not found

Error ID
ERR_CHKPNT_RESOURCE_STRING_NOT_FOUND

Error name
CHKPNT_RESOURCE_STRING_NOT_FOUND

Cause
None.

1624 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.42 15341
Error occurred during restore of Entity

Error ID
ERR_CHKPNT_RESTORE_ERRORS

Error name
CHKPNT_RESTORE_ERRORS

Cause
None.

Solution
None.

3.65.43 15342
Failed to delete the Checkpoint Base Share

Error ID
ERR_CHKPNT_DELETE_BASESHARE_FAIL

Error name
CHKPNT_DELETE_BASESHARE_FAIL

Cause
None.

Solution
None.

3.65.44 15343
Failed to delete the Checkpoint Share

Error ID
ERR_CHKPNT_DELETE_CHECKPOINTSHARE_FAIL

Error name
CHKPNT_DELETE_CHECKPOINTSHARE_FAIL

Cause
None.

1625
3 ERROR CODES

Solution
None.

3.65.45 15344
Unable to get Mutex Handle

Error ID
ERR_CHKPNT_GET_MUTEXHANDLE_FAILED

Error name
CHKPNT_GET_MUTEXHANDLE_FAILED

Cause
None.

Solution
None.

3.65.46 15345
Mutex Wait Timeout for file

Error ID
ERR_CHKPNT_MUTEX_WAIT_TIMEOUT

Error name
CHKPNT_MUTEX_WAIT_TIMEOUT

Cause
None.

Solution
None.

3.65.47 15346
Mutex Wait Failed for file

Error ID
ERR_CHKPNT_MUTEX_WAIT_FAILED

Error name
CHKPNT_MUTEX_WAIT_FAILED

Cause
None.

1626 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.48 15347
Mutex Handle could not be closed

Error ID
ERR_CHKPNT_MUTEXHANDLE_CLOSE_FAILED

Error name
CHKPNT_MUTEXHANDLE_CLOSE_FAILED

Cause
None.

Solution
None.

3.65.49 15348
Mutex Handle could not be released

Error ID
ERR_CHKPNT_MUTEXHANDLE_RELEASE_FAILED

Error name
CHKPNT_MUTEXHANDLE_RELEASE_FAILED

Cause
None.

Solution
None.

3.65.50 15349
Create process Failed

Error ID
ERR_CHKPNT_CREATEPROC_FAILED

Error name
CHKPNT_CREATEPROC_FAILED

Cause
None.

1627
3 ERROR CODES

Solution
None.

3.65.51 15350
MakeCab.exe Wait Timeout

Error ID
ERR_CHKPNT_MAKECAB_WAIT_TIMEOUT

Error name
ERR_CHKPNT_MAKECAB_WAIT_TIMEOUT

Cause
None.

Solution
None.

3.65.52 15351
CreateProcess Wait Failed

Error ID
ERR_CHKPNT_CREATEPROC_WAIT_FAILED

Error name
CHKPNT_CREATEPROC_WAIT_FAILED

Cause
None.

Solution
None.

3.65.53 15352
File creation failed

Error ID
ERR_CHKPNT_FILE_CREATION_FAILED

Error name
CHKPNT_FILE_CREATION_FAILED

Cause
None.

1628 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.54 15353
Error while Cleaning up Mutex Resource

Error ID
ERR_CHKPNT_MUTEXRES_CLEAN_FAILED

Error name
CHKPNT_MUTEXRES_CLEAN_FAILED

Cause
None.

Solution
None.

3.65.55 15354
Failed to set attributes for file

Error ID
ERR_CHKPNT_FILE_SETATTRIB_FAILED

Error name
CHKPNT_FILE_SETATTRIB_FAILED

Cause
None.

Solution
None.

3.65.56 15355
Failed to get attributes for file

Error ID
ERR_CHKPNT_FILE_GETATTRIB_FAILED

Error name
CHKPNT_FILE_GETATTRIB_FAILED

Cause
None.

1629
3 ERROR CODES

Solution
None.

3.65.57 15356
Unable to get the free disk space

Error ID
ERR_CHKPNT_FILE_GETFREEDSKSPC_FAILED

Error name
CHKPNT_FILE_GETFREEDSKSPC_FAILED

Cause
None.

Solution
None.

3.65.58 15357
Failed to open the Properties of file

Error ID
ERR_CHKPNT_FILE_PROPOPEN_FAILED

Error name
CHKPNT_FILE_PROPOPEN_FAILED

Cause
None.

Solution
None.

3.65.59 15358
Failed to create summary tab for file

Error ID
ERR_CHKPNT_FILE_CREATEPROP_FAILED

Error name
CHKPNT_FILE_CREATEPROP_FAILED

Cause
None.

1630 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.65.60 15359
Failed to move file

Error ID
ERR_CHKPNT_FILE_MOVE_FAILED

Error name
CHKPNT_FILE_MOVE_FAILED

Cause
None.

Solution
None.

3.65.61 15360
Failed to archive files.

Error ID
ERR_CHKPNT_FILE_ARCHIVE_FAILED

Error name
CHKPNT_FILE_ARCHIVE_FAILED

Cause
None.

Solution
None.

3.65.62 15361
Warning - Cannot get IMAGEVER parm, defaulting to EPKS rel for rebuilding

Error ID
ERR_CHKPNT_REBUILD_REL_DEFAULT

Error name
CHKPNT_REBUILD_REL_DEFAULT

Cause
None.

1631
3 ERROR CODES

Solution
None.

3.65.63 15362
Failed to create DDF file.

Error ID
ERR_CHKPNT_DDF_FILECREATION_FAILED

Error name
CHKPNT_DDF_FILECREATION_FAILED

Cause
Failed to create DDF file.

Solution
Attempt to recreate the DDF file.

1632 www.honeywell.com
 3 ERROR CODES

3.66 Codes 15501 to 15519

Related topics
“15501” on page 1633
“15502” on page 1633
“15503” on page 1634
“15504” on page 1634
“15505” on page 1634
“15506” on page 1635
“15507” on page 1635
“15508” on page 1635
“15509” on page 1636
“15510” on page 1636
“15511” on page 1636
“15512” on page 1637
“15513” on page 1637
“15514” on page 1637
“15515” on page 1638
“15516” on page 1638
“15517” on page 1638
“15518” on page 1639
“15519” on page 1639

3.66.1 15501
DEFXML Generic Error

Error ID
ERR_DEFXML_GENERIC

Error name
DEFXML_GENERIC

Cause
None.

Solution
None.

3.66.2 15502
Error reading the XML file.

Error ID
ERR_DEFXML_READ_XML

1633
3 ERROR CODES

Error name
DEFXML_READ_XML

Cause
None.

Solution
None.

3.66.3 15503
Error parsing the XML file. The XML file is not valid or not as per the schema.

Error ID
ERR_DEFXML_PARSE_ERROR

Error name
DEFXML_PARSE_ERROR

Cause
None.

Solution
None.

3.66.4 15504
Error reading the section information from the XML file.

Error ID
ERR_DEFXML_READ_SECTION

Error name
DEFXML_READ_SECTION

Cause
None.

Solution
None.

3.66.5 15505
The section does not have a key tag. Cannot create index for the section.

Error ID
ERR_DEFXML_NO_KEY_TAG

1634 www.honeywell.com
 3 ERROR CODES

Error name
DEFXML_NO_KEY_TAG

Cause
None.

Solution
None.

3.66.6 15506
Cannot create an index for the section. No key tags are defined for the section.

Error ID
ERR_DEFXML_INVALID_SECTION

Error name
DEFXML_INVALID_SECTION

Cause
None.

Solution
None.

3.66.7 15507
The include file not found in the path. Cannot resolve the include files.

Error ID
ERR_DEFXML_INC_FILE_NOT_FOUND

Error name
DEFXML_INC_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.66.8 15508
The .ENM.XML file not found in the path.

Error ID
ERR_DEFXML_ENM_FILE_NOT_FOUND

1635
3 ERROR CODES

Error name
DEFXML_ENM_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.66.9 15509
The .BSD.XML file not found in the path.

Error ID
ERR_DEFXML_BSD_FILE_NOT_FOUND

Error name
DEFXML_BSD_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.66.10 15510
The .ARR.XML file not found in the path.

Error ID
ERR_DEFXML_ARR_FILE_NOT_FOUND

Error name
DEFXML_ARR_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.66.11 15511
The BLOB file not found in the path.

Error ID
ERR_DEFXML_BLOB_FILE_NOT_FOUND

1636 www.honeywell.com
 3 ERROR CODES

Error name
DEFXML_BLOB_FILE_NOT_FOUND

Cause
None.

Solution
None.

3.66.12 15512
Data type for the parameter is undefined. Cannot complete reading of the parameter section.

Error ID
ERR_DEFXML_DATATYPE_UNDEFINED

Error name
DEFXML_DATATYPE_UNDEFINED

Cause
None.

Solution
None.

3.66.13 15513
The datatype info (.ENM.XML /.BSD.XML file) for the parameter is not defined. Cannot complete reading of
the parameter section.

Error ID
ERR_DEFXML_NO_DATATYPE_INFO

Error name
DEFXML_NO_DATATYPE_INFO

Cause
None.

Solution
None.

3.66.14 15514
Error writing the XML file to the disk.

Error ID
ERR_DEFXML_WRITING_XML_FILE

1637
3 ERROR CODES

Error name
DEFXML_WRITING_XML_FILE

Cause
None.

Solution
None.

3.66.15 15515
Invalid object index. Cannot perform the specified operation.

Error ID
ERR_DEFXML_INVALID_INDEX

Error name
DEFXML_INVALID_INDEX

Cause
None.

Solution
None.

3.66.16 15516
Invalid object. Cannot perform the specified operation.

Error ID
ERR_DEFXML_INVALID_OBJECT

Error name
DEFXML_INVALID_OBJECT

Cause
None.

Solution
None.

3.66.17 15517
Error loading the schema file from the system\ \ER path.

Error ID
ERR_DEFXML_LOAD_SCHEMA

1638 www.honeywell.com
 3 ERROR CODES

Error name
DEFXML_LOAD_SCHEMA

Cause
None.

Solution
None.

3.66.18 15518
Cannot find the fixed parameter used to store the last used parameter code.

Error ID
ERR_DEFXML_NO_LAST_USED_PC_FDP

Error name
DEFXML_NO_LAST_USED_PC_FDP

Cause
None.

Solution
None.

3.66.19 15519
All parameter codes has been used. The PC codes have to be restarted from 1.

Error ID
ERR_DEFXML_ALL_PC_CODES_USED

Error name
DEFXML_ALL_PC_CODES_USED

Cause
None.

1639
3 ERROR CODES

3.67 Codes 15601 to 15615

Related topics
“15601” on page 1640
“15602” on page 1640
“15603” on page 1641
“15604” on page 1641
“15605” on page 1641
“15606” on page 1642
“15607” on page 1642
“15608” on page 1642
“15609” on page 1643
“15610” on page 1643
“15611” on page 1643
“15612” on page 1644
“15613” on page 1644
“15614” on page 1644
“15615” on page 1645

3.67.1 15601
PDE Generic Error

Error ID
ERR_PDE_GENERIC

Error name
PDE_GENERIC

Cause
None.

Solution
None.

3.67.2 15602
PARDEF BLOB file not found in the path.

Error ID
ERR_PDE_PARDEF_PARAM_FILE_NOT_FOUND

Error name
PDE_PARDEF_PARAM_FILE_NOT_FOUND

Cause
None.

1640 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.67.3 15603
Error while initializing the grid control

Error ID
ERR_PDE_INITIALIZE_GRID

Error name
PDE_INITIALIZE_GRID

Cause
None.

Solution
None.

3.67.4 15604
Error adding tab to PDE.

Error ID
ERR_PDE_ADD_TAB

Error name
PDE_ADD_TAB

Cause
None.

Solution
None.

3.67.5 15605
PARDEF BLOB file cannot be created. Cannot save the BLOB data.

Error ID
ERR_PDE_CREATE_PARDEF_PARAM_FILE

Error name
PDE_CREATE_PARDEF_PARAM_FILE

Cause
None.

1641
3 ERROR CODES

Solution
None.

3.67.6 15606
Data type is not supported in PDE.

Error ID
ERR_PDE_UNKNOWN_DATATYPE

Error name
PDE_UNKNOWN_DATATYPE

Cause
None.

Solution
None.

3.67.7 15607
The tab is not part of PDE. Cannot complete the specified operation.

Error ID
ERR_PDE_TAB_NOT_ADDED

Error name
PDE_TAB_NOT_ADDED

Cause
None.

Solution
None.

3.67.8 15608
The parameter attribute is not known to PDE.

Error ID
ERR_PDE_UNKNOWN_PARAM_ATTR

Error name
PDE_UNKNOWN_PARAM_ATTR

Cause
None.

1642 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.67.9 15609
The parameter attribute is not part of the specified tab. Cannot complete the specified operation.

Error ID
ERR_PDE_PARAM_ATTR_NOT_IN_TAB

Error name
PDE_PARAM_ATTR_NOT_IN_TAB

Cause
None.

Solution
None.

3.67.10 15610
Cannot save file. No file is opened to save.

Error ID
ERR_PDE_FILE_NOT_OPEN

Error name
PDE_FILE_NOT_OPEN

Cause
None.

Solution
None.

3.67.11 15611
Tab is invalid or not added to PDE. Cannot complete the specified operation.

Error ID
ERR_PDE_NOT_VALID_TAB

Error name
PDE_NOT_VALID_TAB

Cause
None.

1643
3 ERROR CODES

Solution
None.

3.67.12 15612
Unknown access lock value is specified.

Error ID
ERR_PDE_UNKNOWN_ACCESS_LOCK

Error name
PDE_UNKNOWN_ACCESS_LOCK

Cause
None.

Solution
None.

3.67.13 15613
The validation of data failed. One or more fields contain invalid value.

Error ID
ERR_PDE_VALIDATION_FAILED

Error name
PDE_VALIDATION_FAILED

Cause
None.

Solution
None.

3.67.14 15614
Execution of PDE command failed.

Error ID
ERR_PDE_CMD_EXEC_FAILED

Error name
PDE_CMD_EXEC_FAILED

Cause
None.

1644 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.67.15 15615
Invalid PDE property or value specified.

Error ID
ERR_PDE_INVALID_PROP

Error name
PDE_INVALID_PROP

Cause
None.

Solution
None.

1645
3 ERROR CODES

3.68 Codes 15801 to 15815

Related topics
“15801” on page 1646
“15802” on page 1646
“15803” on page 1647
“15804” on page 1647
“15805” on page 1647
“15806” on page 1648
“15807” on page 1648
“15808” on page 1648
“15809” on page 1649
“15810” on page 1649
“15811” on page 1649
“15812” on page 1650
“15813” on page 1650
“15814” on page 1650
“15815” on page 1651

3.68.1 15801
Browser error 1

Error ID
ERR_BROWSER_ERROR_1

Error name
BROWSER_ERROR_1

Cause
None.

Solution
None.

3.68.2 15802
Failed to Establish Connection.

Error ID
ERR_BRESTABLISHCONN

Error name
BRESTABLISHCONN

Cause
None.

1646 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.68.3 15803
Failed to Get Assignment Relations.

Error ID
ERR_BRGETASSIGNMENTS

Error name
BRGETASSIGNMENTS

Cause
None.

Solution
None.

3.68.4 15804
Failed to Get Connection Information.

Error ID
ERR_BRGETCONNECTIONS

Error name
BRGETCONNECTIONS

Cause
None.

Solution
None.

3.68.5 15805
Failed to Get Instances.

Error ID
ERR_BRGETINSTANCES

Error name
BRGETINSTANCES

Cause
None.

1647
3 ERROR CODES

Solution
None.

3.68.6 15806
Failed to Get Parent Template Information.

Error ID
ERR_BRGETPARENT

Error name
BRGETPARENT

Cause
None.

Solution
None.

3.68.7 15807
Failed to Get Parameter References.

Error ID
ERR_BRGETPARAMREFS

Error name
BRGETPARAMREFS

Cause
None.

Solution
None.

3.68.8 15808
Failed to Get Block References.

Error ID
ERR_BRGETREFS

Error name
BRGETREFS

Cause
None.

1648 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.68.9 15809
Failed to Initialize Provider. Search Cannot Proceed.

Error ID
ERR_BRINITIALIZEPROVEDER

Error name
BRINITIALIZEPROVEDER

Cause
None.

Solution
None.

3.68.10 15810
Failed to Start Requested Search.

Error ID
ERR_BRSTARTSEARCH

Error name
BRSTARTSEARCH

Cause
None.

Solution
None.

3.68.11 15811
Failed to Get the List of Available Strategies/Templates.

Error ID
ERR_BRGETTAGS

Error name
BRGETTAGS

Cause
None.

1649
3 ERROR CODES

Solution
None.

3.68.12 15812
Failed to Get the List of Available Parameters.

Error ID
ERR_BRGETPARAMETERS

Error name
BRGETPARAMETERS

Cause
None.

Solution
None.

3.68.13 15813
The Parameter Search Failed Due to Unexpected Error.

Error ID
ERR_BRPARAMSEARCHFAILED

Error name
BRPARAMSEARCHFAILED

Cause
None.

Solution
None.

3.68.14 15814
Failed to Get Derived Children Information.

Error ID
ERR_BRGETDERIVATIONS

Error name
BRGETDERIVATIONS

Cause
None.

1650 www.honeywell.com
 3 ERROR CODES

Solution
None.

3.68.15 15815
Failed to Retrieve Information on Expressions.

Error ID
ERR_BRGETEXPRESSIONS

Error name
BRGETEXPRESSIONS

Cause
None.

Solution
None.

1651
3 ERROR CODES

3.69 15819
Search aborted due to internal browser error. Check log for details.

Error ID
ERR_BRINTERNALERROR

Cause
The search is aborted since Online Data Search went into an abnormal condition during query execution.

Solution
Contact TAC with log details.

1652 www.honeywell.com
 3 ERROR CODES

3.70 15820
This operation cannot be performed at this moment. Please try after some time.

Error ID
ERR_STOPINPROGRESS

Cause
You have tried to validate or execute a query and the tool is not able to respond due to some internal processing.

Solution
Validate or execute the query after some time.

1653
3 ERROR CODES

3.71 15821
Condition parameter %s referred at %s does not exist on the point %s.

Error ID
ERR_BRCONDPARAMDOESNOTEXIST

Cause
The condition parameter defined in the query does not exist on the point.

Solution
Provide a condition parameter that exists on the point which is being searched.

1654 www.honeywell.com
 3 ERROR CODES

3.72 15822
Array index invalid or out of range for parameter %s on point %s. Enter index range between %s and %s.

Error ID
ERR_BRPARAMINDEXOUTOFRANGE

Cause
The given array index does is not within the defined index range for the parameter.

Solution
Provide an array index within the defined range for the parameter.

1655
3 ERROR CODES

3.73 15823
Error reading value for output parameter %s on point %s or the List View grid in the Monitoring view displays
this error code.

Error ID
ERR_BROUTPUTPARAMREADERROR

Cause
• The output parameter value cannot be read.
• List View does not support data type of the selected parameters.

Solution
• Execute the query after some time.
• Refer to Project view values to get an idea

1656 www.honeywell.com
 3 ERROR CODES

3.74 15824
Error reading value for condition parameter %s at %s on point %s.

Error ID
ERR_BRCONDPARAMREADERROR

Cause
The condition parameter value cannot be read.

Solution
Execute the query after some time.

1657
3 ERROR CODES

3.75 15825
Error evaluating expression on point %s.

Error ID
ERR_BRCONDITIONERROR

Cause
Since the condition parameter cannot be read, the condition evaluation is not done for the point.

Solution
Provide a different condition parameter or execute the query after some time.

1658 www.honeywell.com
 3 ERROR CODES

3.76 15826
The comparison operator not valid for %s parameter with %s data type at %s.

Error ID
ERR_BROPERATORINCOMPATIBLEWITHPARAM

Cause
You have defined the query with mismatch between the condition operator and the parameter data type.

Solution
Modify the query accordingly to use operators which are compatible with the data type of the given condition
parameter.
Refer to the Search Utility User’s Guide for more information.

1659
3 ERROR CODES

3.77 15827
Data type incompatibility in the left-hand side and right-hand side of the expression %s.

Error ID
ERR_BRDATATYPEINCOMPATIBLEWITHPARAM

Cause
The data type of the left-hand side and right-hand side of the expression are not compatible with each other.
Hence the expression cannot be evaluated.

Solution
Modify the query accordingly. The following Experion parameter data types and their corresponding parameter
values can be defined in the conditional expression:
• Character (CHAR8, CHAR16)
• Integer (INT8, INT16, INT32, INT64, UINT8, UINT16, UINT32, UINT64)
• Boolean (BOOLEAN)
• Float (FLOAT32, FLOAT64)
• String (STRING)
• Enumeration (ENUM, SELFDEF_ENUM)
• Bit string (BITSTRING)
• Expression (EXPRSTR)
• Time (TIME, TIMEOFDAY, DELTATIME)
• Entity ID (ENTITYID)
• Parameter ID (PARAMID)

1660 www.honeywell.com
 3 ERROR CODES

3.78 15828
Condition %s is invalid as left-hand side is not a parameter.

Error ID
ERR_BRLHSNOTAPARAMETER

Cause
While defining the query, the condition expression must be in the format left-hand side (LHS) (conditional
operator) right-hand side (RHS) The LHS of the condition expression should always be a parameter.

Solution
Modify the query accordingly.

1661
3 ERROR CODES

3.79 15829
Invalid type.

Error ID
ERR_BRINVALIDTYPEFORMAT

Cause
Invalid type entry.

Solution
Modify the query accordingly. Type must be entered in the format LibraryName: [.DeviceName].
TemplateName. Device name can be optional.

1662 www.honeywell.com
 3 ERROR CODES

3.80 15830
Output parameter %s does not exist on the point %s.

Error ID
ERR_BROUTPUTPARAMDOESNOTEXIST

Cause
The output parameter defined in the query does not exist on the point.

Solution
Modify the query accordingly.

1663
3 ERROR CODES

3.81 15831
Array index invalid or out of range for parameter %s on point %s. For low index enter a value between %s and
%s. For high index enter a value between %s and %s.

Error ID
ERR_BRPARAMINDEXOUTOFRANGE_2DARRAY

Cause
The given array index does is not within the defined index range for the parameter.

Solution
Provide an array index within the defined range for the parameter.

1664 www.honeywell.com
 3 ERROR CODES

3.82 15832
Output parameter %s does not exist on the point %s which is the <$TOPLEVELPARENT> for the point %s.

Error ID
ERR_BRACRONYMPARAMDOESNOTEXIST

Cause
The output parameter defined in the query does not exist on the point.

Solution
Modify the query accordingly.

1665
3 ERROR CODES

3.83 15833
Array index invalid or out of range for parameter %s on point %s which is the <$TOPLEVELPARENT> for the
point %s. Enter index range between <1> and <10>.

Error ID
ERR_BRACRONYMPARAMINDEXOUTOFRANGE

Cause
<The given array index is not within the defined index range for the parameter.

Solution
Provide an array index within the defined range for the parameter.

1666 www.honeywell.com
 3 ERROR CODES

3.84 15834
Array index invalid or out of range for parameter %s on point %s which is the <$TOPLEVELPARENT> for the
point %s. For low index, enter a value between <1> and <10>. For high index, enter a value between <1> and
<10>."

Error ID
ERR_BRACRONYMPARAMINDEXOUTOFRANGE_2DARRAY

Cause
The given array index does is not within the defined index range for the parameter.

Solution
Provide an array index within the defined range for the parameter.

1667
3 ERROR CODES

3.85 15835
Error reading value for output parameter %s on point %s which is the <$TOPLEVELPARENT> for the point
%s.

Error ID
ERR_BRACRONYMPARAMREADERROR

Cause
The value for the acronym parameter cannot be read.

Solution
Modify the parameter or query after some time.

1668 www.honeywell.com
 3 ERROR CODES

3.86 15836
Output parameter %s cannot be read as the <$TOPLEVELPARENT> does not exist for the point %s.

Error ID
ERR_BRINVALIDACRONYMPARAMREADERROR

Cause
Since the acronym is invalid on the point, the value for the parameter on the acronym cannot be read.

Solution
Provide a valid acronym for the point.

1669
3 ERROR CODES

3.87 15849
Unsupported condition parameter %s referred at %s.

Error ID
ERR_BRCONDPARAMTYPENOTSUPPORTED

Cause
Unsupported parameter is being referred in condition expression

Solution
Modify the condition expression accordingly.

1670 www.honeywell.com
 3 ERROR CODES

3.88 15850
Unsupported Output parameter %s on Point %s

Error ID
ERR_BRPOUTPUTPARAMTYPENOTSUPPORTED

Cause
Unsupported parameter is being referred in output parameters.

Solution
Modify the output parameters accordingly.

1671
3 ERROR CODES

3.89 15851
Unsupported parameter %s on the point %s which is the %s for the point %s.

Error ID
ERR_BRPACRONMYPARAMTYPENOTSUPPORTED

Cause
Unsupported parameter is being referred in output acronym parameters.

Solution
Modify the output acronym parameters accordingly.

1672 www.honeywell.com
4 Expression Error Codes

Related topics
“Expression Codes 4005 to 4077” on page 1674

1673
4 EXPRESSION ERROR CODES

4.1 Expression Codes 4005 to 4077

Related topics
“4005” on page 1674
“4006” on page 1675
“4007” on page 1675
“4008” on page 1675
“4009” on page 1675
“4010” on page 1676
“4011” on page 1676
“4012” on page 1676
“4013” on page 1676
“4014” on page 1677
“4015” on page 1677
“4016” on page 1677
“4017” on page 1677
“4018” on page 1678
“4051” on page 1678
“4052” on page 1678
“4053” on page 1678
“4054” on page 1678
“4055” on page 1679
“4056” on page 1679
“4057” on page 1679
“4062” on page 1679
“4063” on page 1680
“4064” on page 1680
“4065” on page 1680
“4066” on page 1680
“4067” on page 1681
“4068” on page 1681
“4069” on page 1681
“4070” on page 1682
“4076” on page 1682
“4077” on page 1682

4.1.1 4005
Unexpected end syntax type error in expression
(IDS_UNEXPECTED_END)

Cause
Input parameters do not comply to given rules - outside specifications.
The parser reached the end of the expression without being able to generate a complete translation. Usually,
some deferred operations or operands are still pending, such as an open parenthesis, higher prioritized
operations, and so on.

1674 www.honeywell.com
 4 EXPRESSION ERROR CODES

This error may indicate that something is missing at the end or that some earlier construct leads the parser to
expect additional characters/symbols.

Solution
Retry with compatible input parameters and be sure construct is complete.

4.1.2 4006
Unexpected comma (,) in expression
(IDS_UNEXPECTED_KOMMA)

Cause
The parser encountered a comma at a location, where the syntax does not allow a comma. However a more
meaningful error message cannot be issued. Most likely something is missing earlier in the expression like a
missing function argument.

Solution
Be sure expression includes all functions and retry.

4.1.3 4007
Colon without questionmark (?) in expression
(IDS_COLON_WITHOUT_QUESTIONMARK)

Cause
A colon was found with a corresponding questionmark somewhere earlier in the expression. The problem may
be created by an incorrect number of parenthesis, which may hide the questionmark from the colon, which then
appears lost.

Solution
Be sure expression construct is correct and retry.

4.1.4 4008
Function does not take multiple arguments in expression
(IDS_FCT_DOESNOT_TAKE_MULTIPLE_ARGUMENTS)

Cause
Multiple arguments were found for a function, which takes only one argument. In rare cases, this may be caused
by confusion of the comma as binary operator and the comma as argument list separator. Check the use of
parenthesis, commas, and function names.

Solution
Be sure expression construct is correct and retry.

4.1.5 4009
Closing parenthesis expected in expression
(IDS_CLOSING_PARENTHESIS_EXPECTED)

1675
4 EXPRESSION ERROR CODES

Cause
Closing parenthesis was expected. Check the use of parenthesis, commas, and function names.

Solution
Be sure expression construct is correct and retry.

4.1.6 4010
Operand expected in expression
(IDS_OPERAND_EXPECTED)

Cause
An operand was expected at this location, because earlier either a opening parenthesis, a function name or an
unary operator was used. An operand can either be a simple value or a subexpression.

Solution
Be sure expression construct is correct and retry.

4.1.7 4011
Missing argument in expression
(IDS_MISSING_ARGUMENT)

Cause
An argument was expected for a given operator used.

Solution
Be sure expression construct is correct and retry.

4.1.8 4012
Operator expected in expression
(IDS_OPERATOR_EXPECTED)

Cause
An operator was expected at this location, because a value or subexpression is preceding.

Solution
Be sure expression construct is correct and retry.

4.1.9 4013
Colon expected in expression
(IDS_COLON_EXPECTED)

Cause
A colon was expected at this location, because a value or subexpression is preceding.

1676 www.honeywell.com
 4 EXPRESSION ERROR CODES

Solution
Be sure expression construct is correct and retry.

4.1.10 4014
Type mismatch in expression
(IDS_TYPE_MISMATCH)

Cause
Type does not match given expression construct.

Solution
Be sure expression construct is correct and retry.

4.1.11 4015
Operation in expression does support this type
(IDS_TYPE_NOT_SUPPORTED_FOR_THIS_OPERATION)

Cause
Operation used in expression does not support the given type.

Solution
Be sure expression construct is correct and retry.

4.1.12 4016
Syntax error in expression
(IDS_SYNTAX_ERROR)

Cause
Expression construct is incorrect for given operation.

Solution
Be sure expression construct is correct and retry.

4.1.13 4017
Not an array parameter
(IDS_NOTANARRAYPARAM)

Cause
The alias/parameter indexed is not an array.

Solution
Be sure expression construct is correct and retry.

1677
4 EXPRESSION ERROR CODES

4.1.14 4018
Array dimensions incorrect
(IDS_ARRAYDIMENSIONINCORRECT)

Cause
The array indexed with incorrect number of dimensions

Solution
Be sure expression construct is correct and retry.

4.1.15 4051
Unsupported connection type
(IDS_UNSUPPORTED_CONNECTION_TYPE)

Cause
Expression construct does not support given connection type.

Solution
Be sure expression construct is correct and retry.

4.1.16 4052
Unexpected closing parenthesis in expression
(IDS_UNEXPECTED_CLOSING_PARENTHESIS)

Cause
Closing parenthesis was not expected. Check the use of parenthesis, commas, and function names.

Solution
Be sure expression construct is correct and retry.

4.1.17 4053
Cannot assign to recipe value
(IDS_CANNOT_ASSIGN_TO_RVALUE)

Cause
Check the use of operator.

Solution
Be sure expression construct is correct and retry.

4.1.18 4054
Unexpected array open format

1678 www.honeywell.com
 4 EXPRESSION ERROR CODES

(IDS_UNEXPECTED_ARRAY_OPEN_FMT)

Cause
An unexpected left bracket ([ } was found. The left bracket ([ ) is used for array syntax and cannot be used as a
standalone operator.

Solution
Be sure expression construct is correct and retry.

4.1.19 4055
Expected array close format
(IDS_ARRAY_CLOSE_EXPECTED_FMT)

Cause
A right bracket ( ]) was expected, because earlier a left ([ ) was used to open a scope for an array index
expression or value. Verify the nesting of subexpressions and array index expressions.

Solution
Be sure expression construct is correct and retry.

4.1.20 4056
Expected array open format
(IDS_ARRAY_OPEN_EXPECTED_FMT)

Cause
A left bracket ([ ) was expected. Either a open parenthesis was mistakenly used instead of a left bracket or an
operator is missing after the parameter reference. Note, that this error message is only a syntactical guess, it
does not imply that the parameter reference actually accepts array indexes.

Solution
Be sure expression construct is correct and retry.

4.1.21 4057
Array index in expression
(IDS_ARRAY_INDEX)

Cause
An invalid array index expression was found. This is most likely an array index range problem.

Solution
Verify range and dimension of the array parameter you try to reference and retry.

4.1.22 4062
Function expects parenthesis in expression

1679
4 EXPRESSION ERROR CODES

(IDS_FCT_EXPECTS_PARENTHESIS)

Cause
Parenthesis was expected. Check the use of parenthesis, commas, and function names.

Solution
Be sure expression construct is correct and retry.

4.1.23 4063
Exceeded assignment output limit
(IDS_ASSIGNMENT_OP_LIMIT_EXCEEDED)

Cause
Check the use of assignment and operators. Exceeded the allowed number of assignment operators.

Solution
Be sure expression construct is correct and retry.

4.1.24 4064
Assignment is missing operator
(IDS_MISSING_ASSIGNMENT_OPERATOR)

Cause
Check the use of assignment and operators. Expressions such as Step output expressions absolutely need an
assignment operator.

Solution
Be sure expression construct is correct and retry.

4.1.25 4065
Expression is null
(IDS_EXPRESSION_IS_NULL)

Cause
Expression construct is incorrect for given operation. No Expression has been specified. Step output expressions
cannot handle this.

Solution
Be sure expression construct is correct and retry.

4.1.26 4066
String reference not supported
(IDS_STRING_REF_NOT_SUPPORTED)

1680 www.honeywell.com
 4 EXPRESSION ERROR CODES

Cause
Expression construct does not support string reference. Do not support reference to string datatype (for example,
DevCtl.OpReq).

Solution
Be sure expression construct is correct and retry.

4.1.27 4067
Cannot fetch connection value
(IDS_CANT_FETCH_CONNECTION_VALUE)

Cause
1. Expression construct does not support operation. Connection fetch unsuccessful.
2. If this error occurs in a Control Recipe (activity, procedure, or batch), this can be caused by an unselected
unit referenced in an expression.

Solution
1. Be sure expression construct is correct and retry.
2. Ensure that all required units for the current execution context are selected. In most Master Recipe
configuration, the execution recovers automatically. However, with some Master Recipe configuration, the
failed expression has to be triggered to be re-executed (For example, by holding and restarting the control
recipe or by temporarily changing Mode to SingleStep). For more information, refer to the parameter
RETRYOPT.

4.1.28 4068
Complex LHS in expression
(IDS_COMPLEX_LHS)

Cause
Expression construct does not support operation. LHS of an expression can only be a simple tag.param.

Solution
Be sure expression construct is correct and retry.

4.1.29 4069
Improper number of arguments
(IDS_IMPROPER_NUMBER_OF_ARGUMENTS)

Cause
Expression construct does not support operation. For example, MIDS function takes exactly three arguments

Solution
Be sure expression construct is correct and retry.

1681
4 EXPRESSION ERROR CODES

4.1.30 4070
NOP allowed only in conditional expression
(IDS_NOP_ALLOWED_ONLY_IN_COND_EXPR)

Cause
Expression construct does not support operation.

Solution
Be sure expression construct is correct and retry.

4.1.31 4076
Referenced parameter not loaded to monitoring side
(IDS_REFDPARAMNOTLOADED)

Cause
This error may occur upon ERDB migration of loaded AuxCalc, EnhAuxCalc, RegCalc, EnhRegCalc,
SCM:STEP, or SCM:TRANSITION blocks if the expression contains a reference to a parameter which either
does not exist or exists only on the project side.
When this error message occurs, the expression containing the unloaded referenced parameter will not be re-
parsed, and will remain exactly as it was prior to database migration.

Solution
Make sure the expression contains a reference to a parameter that exists and is located on the monitoring side.

4.1.32 4077
Invalid reference to parameter
(IDS_INVALIDREFTOPARAM)

Cause
Expression construct does not support operation. Connection string refers to invalid parameter.

Solution
Be sure expression construct is correct and retry.

1682 www.honeywell.com
5 Notices

Trademarks
Experion®, PlantScape®, SafeBrowse®, TotalPlant®, and TDC 3000® are registered trademarks of Honeywell
International, Inc.
OneWireless™ is a trademark of Honeywell International, Inc.

Other trademarks
Microsoft and SQL Server are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Trademarks that appear in this document are used only to the benefit of the trademark owner, with no intention
of trademark infringement.

Third-party licenses
This product may contain or be derived from materials, including software, of third parties. The third party
materials may be subject to licenses, notices, restrictions and obligations imposed by the licensor. The licenses,
notices, restrictions and obligations, if any, may be found in the materials accompanying the product, in the
documents or files accompanying such third party materials, in a file named third_party_licenses on the media
containing the product, or at http://www.honeywell.com/ps/thirdpartylicenses.

1683
5 NOTICES

5.1 Documentation feedback

You can find the most up-to-date documents on the Honeywell Process Solutions support website at:
http://www.honeywellprocess.com/support
If you have comments about Honeywell Process Solutions documentation, send your feedback to:
hpsdocs@honeywell.com
Use this email address to provide feedback, or to report errors and omissions in the documentation. For
immediate help with a technical problem, contact your local Honeywell Process Solutions Customer Contact
Center (CCC) or Honeywell Technical Assistance Center (TAC) listed in the “Support and other contacts”
section of this document.

1684 www.honeywell.com
 5 NOTICES

5.2 How to report a security vulnerability

For the purpose of submission, a security vulnerability is defined as a software defect or weakness that can be
exploited to reduce the operational or security capabilities of the software.
Honeywell investigates all reports of security vulnerabilities affecting Honeywell products and services.
To report a potential security vulnerability against any Honeywell product, please follow the instructions at:
https://honeywell.com/pages/vulnerabilityreporting.aspx
Submit the requested information to Honeywell using one of the following methods:
• Send an email to security@honeywell.com.
or
• Contact your local Honeywell Process Solutions Customer Contact Center (CCC) or Honeywell Technical
Assistance Center (TAC) listed in the “Support and other contacts” section of this document.

1685
5 NOTICES

5.3 Support and other contacts

For support, contact your local Honeywell Process Solutions Customer Contact Center (CCC).

North America
Country Phone Facsimile Email
Canada and United States 800-822-7673 973-455-5000 askssc@honeywell.com

Northern Europe
Country Local Time Phone Facsimile Email
Business
Hours
Denmark 07:00 – 18:00 80–252165 +45 6980 2349 hpscustomersupport@honeywell.com
Finland 08:00 – 19:00 0800–9–15938 +358 (0)9 2319 4396 hpscustomersupport@honeywell.com
Ireland 06:00 – 17:00 1800939488 +353 (0)1 686 4905 hpscustomersupport@honeywell.com
Netherlands 07:00 – 18:00 0800 020 3498 +31 (0)20 524 1609 hpscustomersupport@honeywell.com
Norway 07:00 – 18:00 800–11478 47–852–287–16 hpscustomersupport@honeywell.com
Sweden 07:00 – 18:00 0200883167 +46 (0)8 509 097 84 hpscustomersupport@honeywell.com
United 06:00 – 17:00 08002797226 +44 (0)20 3031 1064 hpscustomersupport@honeywell.com
Kingdom

Southern Europe
Country Local Time Phone Facsimile Email
Business
Hours
Belgium 07:00 – 18:00 080048580 +32 (0)2 791 96 02 hpscustomersupport@honeywell.com
France 07:00 – 18:00 0805100041 +33 (0)1 72 74 33 44 hpscustomersupport@honeywell.com
Luxembourg 07:00 – 18:00 8002–8524 +352 24611292 hpscustomersupport@honeywell.com
Spain 07:00 – 18:00 800099804 +34 91 791 56 25 hpscustomersupport@honeywell.com
Portugal 06:00 – 17:00 800–8–55994 +34 91 791 56 25 hpscustomersupport@honeywell.com

Eastern Europe
Country Local Time Phone Facsimile Email
Business
Hours
Bulgaria 08:00 – 19:00 700 20771 +359 (0)2 489 7384 hpscustomersupport@honeywell.com
Croatia 07:00 – 18:00 0800 80 6392 +420 227 204 957 hpscustomersupport@honeywell.com
Czech 07:00 – 18:00 800 142 784 +420 227 204 957 hpscustomersupport@honeywell.com
Republic
Hungary 07:00 – 18:00 06 800 20 699 +36 (06) 1 577 7371 hpscustomersupport@honeywell.com
Poland 07:00 – 18:00 00 800 121 50 46 +48 22 485 35 10 hpscustomersupport@honeywell.com
Romania 08:00 – 19:00 0 800 800 178 +40 (0)31 710 7590 hpscustomersupport@honeywell.com
Russia 09:00 – 20:00 8.10.80 02-412 50 11 +7 495 796 98 94 hpscustomersupport@honeywell.com
Federation

1686 www.honeywell.com
 5 NOTICES

Country Local Time Phone Facsimile Email

Business
Hours
Slovakia 07:00 – 18:00 0800 002 340 +421 (0)2 3301 0376 hpscustomersupport@honeywell.com

Central Europe
Country Local Time Phone Facsimile Email
Business
Hours
Austria 07:00 – 18:00 0800 006438 +43 (0)1 253 6722 hpscustomersupport@honeywell.com
4904
Germany 07:00 – 18:00 0800 7239098 +49 (0)30 6908 8463 hpscustomersupport@honeywell.com
Greece 08:00 – 19:00 00800 12 9493 +30 21 1 268 6973 hpscustomersupport@honeywell.com
Israel 08:00 – 19:00 1 809 407 309 +972 (0)2 591 6148 hpscustomersupport@honeywell.com
Italy 07:00 – 18:00 8000 35205 +39 06 96681356 hpscustomersupport@honeywell.com
Switzerland 07:00 – 18:00 00 080 035 +41 (0)31 560 41 60 hpscustomersupport@honeywell.com

Middle East and South Africa

Country Local Time Business Hours Phone Email
Bahrain 08:00 – 19:00 8008 1343 hpscustomersupport@honeywell.com
Oman 08:00 – 19:00 8007 7595 hpscustomersupport@honeywell.com
Qatar 08:00 – 19:00 800 5460 hpscustomersupport@honeywell.com
Saudi Arabia 08:00 – 19:00 800 844 5309 hpscustomersupport@honeywell.com
South Africa 07:00 – 18:00 0800 983 634 hpscustomersupport@honeywell.com
Turkey 08:00 – 19:00 00800 448823587 hpscustomersupport@honeywell.com
United Arab 09:00 – 20:00 8000 444 0300 hpscustomersupport@honeywell.com
Emirates

Other regions
In other regions, contact your local Honeywell Technical Assistance Center (TAC) for support.
Region Phone Facsimile Email
Pacific 1300-364-822 (toll free +61-8-9362-9564 GTAC@honeywell.com
within Australia)
+61-8-9362-9559 (outside
Australia)
India +91-20-6603-2718 / 19 +91-20-6603-9800 Global-TAC-India@honeywell.com
1800-233-5051
Korea +82-80-782-2255 (toll free +82-2-792-9015 Global-TAC-Korea@honeywell.com
within Korea)
People’s Republic +86-21-2219-6888 Global-TAC-China@honeywell.com
of China
800-820-0237
400-820-0386
Singapore +65-6823-2215 +65-6445-3033 GTAC-SEA@honeywell.com
Japan +81-3-6730-7228 Global-TAC-
JapanJA25@honeywell.com

1687
5 NOTICES

World Wide Web

Honeywell Process Solutions support website:
http://www.honeywellprocess.com/support

Elsewhere
Contact your nearest Honeywell office.

1688 www.honeywell.com
 5 NOTICES

5.4 Training classes

Honeywell holds technical training classes on Experion PKS. These classes are taught by experts in the field of
process control systems. For more information about these classes, contact your Honeywell representative, or
see http://www.automationcollege.com.

1689
5 NOTICES

1690 www.honeywell.com