Secondary Containment
Secondary Containment
Secondary Containment
www.spilkleen.com
sales@spilkleen.com
DECEMBER 2012
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
ULTRA-DRAIN PLUGS
Tapered design wedges securely into standard drains to stop any flow. Eyebolts
are removable, allowing installation of grating with Drain Plug in place. Non-
absorbing, easily cleaned for repeated use. Flexible polyurethane material - resists
oil, water and most aggressive chemicals. Cleans with soap and water.
Standard Sizes:
Part #: Part #:
2113, 2” diameter, 2 lbs 2114, 3” diameter, 2 lbs
2115, 4” diameter, 3 lbs 2117, 6” diameter, 6 lbs
2118, 8” diameter, 13 lbs 2119, 10” diameter, 16 lbs
2121, 12” diameter, 25 lbs. 2116 - 3 Plug Kit
ULTRA-DRAIN SEALS
Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain environmental conditions
such as temperature, humidity and UV radiation. Regular inspection of the stored product should be done to ensure it is in a usable state.
SECONDARY CONTAINMENT
2
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
ULTRA-SPILL BERM
TEMPORARY SPILL BERM SEALS OFF SPILLS FROM THE ENVIRONMENT, NEARBY
DRAINS AND DOORWAYS
Standard 10 foot sections can be cut to various lengths to meet custom needs. Unique,
urethane material "weeps" into small cracks and crevices to seal off liquid flow. SpillBerm is
non-absorbing and is easily cleaned for repeated use. Also available in black to help hide
dirt and grime. Applications include spill response, temporary secondary containment, seal-
ing off of doorways during washdown operations.
(Due to the nature of softer urethane, the physical properties of these products may change with exposure to certain
environmental conditions such as temperature, humidity and UV radiation. Regular inspection of the stored product
should be done to ensure it is in a usable state.)
ULTRA-SPILL BERM PLUS - TALLER SPILLBERM HELPS CONTAIN OR DIVERT LARGER VOLUME SPILLS!
• Unique, urethane material "weeps" into small cracks and crevices to seal off liquid flow.
• Material of construction is non-absorbing and is easily cleaned for repeated use.
• Built-in connectors allow multiple units to be quickly and easily connected.
• Helps comply with NPDES and SPCC
CONTAINMENT BOOMS
Containment Booms are recommended for use on open waters such as large lakes, bays,
harbors or ocean environments. Top cable is recommended when several hundred feet are
deployed. 3/8” chain ballast is recommended when tidal flows or current exist.
4”x6” booms are floating containment devices for ponds, small lakes, streams, creeks and
small rivers where strong currents or winds do not exist. 6”x12” booms are used on lakes or
open bodies of water where wind creates significant wave action. Under normal conditions,
total section lengths should not
Item Description Size
exceed 500’ without a top tension
member. Aluminum quick latch or CB10-50 4” dia float, 6” skirt, 1/4” or 5/16” galvanized chain ballast, 50’ 10”x50’
slide couplers are recommended. CB18-50 6” dia float, 12” skirt, 1/4”, 5/16”, 3/8” galvanized chain ballast, 50’ 18”x50’
Top tension cable available on
CB18-100 6” dia float, 12” skirt, 1/4”, 5/16”, 3/8” galvanized chain ballast, 100’ 18”x100’
request.
SECONDARY CONTAINMENT
3
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
POLY-OVERPACK 95
The Poly-Overpack 95 meets Group 1 packaging standards and salvage drum regulations. Can
safely contain a wide range of hazardous materials - including acids, corrosives and damaged parts -
in 55 gallon drums. Tight, secure and leak-free container closing is simple. Just place any long
object, like a wooden two-by-four, in the handy lid slots and turn it to screw the lid down tightly.
Meets performance-oriented packaging requirements of U.S. DOT and UN regulations.
Part #: 1237-YE
Top Diameter: Ext: 31.75” / Int: 27”
Bottom Diameter: Ext: 26” / Int: 24.75”
Height: Ext: 41.5” / Int: 37”
Weight: 48lbs
Handling Capacity: 650 lbs
Sump Capacity: 95 gallons
Regulations: UN 1H2/X295/S, UN 1H2T/Y295/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
POLY-OVERPACKS
20 and 30 gallon Salvage Drums are versatile units that can directly contain solid and sludges with security. With a 1/2 turn
lid, this ergonomically designed unit allows for easy access, unlike traditional “hoop-ring designs”. The 20 gallon unit accepts
bottles, cans and 5 gallon pails while the 30 gallon unit can contain up to 16 gallon drums. Units are also nestable, which
allows for ease of shipment.
POLY-OVERPACK 20 POLY-OVERPACK 30
POLY-OVERPACK 65
Poly-Overpack 65 meets Group 1 packaging standards, Salvage Drum regulations, and is designed
to fit 30 gallon drums. This overpack nests for easy storage and has a gasket in the lid for secure
containment.
Part #: 1065-YE
Top Diameter: Ext: 27.75” / Int: 23.75”, Bottom Diameter: Ext: 23” / Int: 22”
Height: Ext: 37.5” / Int: 34.25”
Weight: 47lbs
Handling Capacity: 440 lbs
Sump Capacity: 65 gallons
Regulations: UN 1H2/X200/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
Part #: 1295-YE
Top Diameter: Ext: 32” / Int: 27”, Bottom Diameter: Ext 26” / Int: 25”
Height: Ext: 44” / Int: 37”
Weight: 55 lbs.
Handling Capacity: 650 lbs
Sump Capacity: 95 gal.
Regulations: UN 1H2/X295/S, UN 1H2T/Y295/S, DOT 49 CFR 173.3(c), EPA, SPCC and NPDES
OVERPACKS
4
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
WHEELED OVERPACK 95
The wheeled Overpack 95 is the first mobile one-piece overpack on wheels that can handle
55 gallon drums. A salvage drum and dolly all in one, it eliminates the need for a separate dolly for
transportation. The 95 gallon polyethylene UN rated salvage drum has built-in
handles and 6” polyolefin wheels, that allow for easy steering through doorways
or around any obstacle.
Part #: 1299-YE
Top Diameter: Ext: 31.38” / Int: 27.25”, Bottom Diameter: Ext: 25.75” / Int: 24.75”
Height: Ext: 47.5” / Int: 38.5”
Weight: 56lbs
Handling Capacity: 250 lbs
Sump Capacity: 95 gallons
Regulations: UN 1H2/X113/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
WHEELED OVERPACK 50
The wheeled Overpack 50 is the first mobile one-piece overpack on wheels that
can handle 55 gallon drums. A salvage drum and dolly all in one, they eliminate
the need for a separate dolly for transportation. The 50 gallon polyethylene UN
rated salvage drum has built-in handles and 6” polyolefin wheels, that allow for
easy steering through doorways or around any obstacle.
Part #: 1259-YE
Top Diameter: Ext: 23” / Int: 20”
Bottom Diameter: Ext: 18.38” / Int: 17.75”
Height: Ext: 45.38” / Int: 36”
Weight: 47lbs
Handling Capacity: 275 lbs
Sump Capacity: 50 gallons
Regulations: UN 1H2/X125/S, DOT 49 CFR 173.3 (c), EPA, SPCC and NPDES
OVERPACKS
5
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
The Universal Poly-Drum Funnel fits both closed-head and open-head 55-gallon drums, and other containers.
Just set it and forget it. Exclusive features include patented scalloped design, high side wall and bung fitting
holders. Add the optional cover for more value!
The Universal Poly-Drum Safety Funnel has all the same features plus a non-sparking safety bung closure with
flame arrestor. Ideal for flammable liquids. Optional cover available.
BURP-FREE FUNNEL
Burp-Free Ultra Funnels feature a built-in vent. No more splashing or “burping” when pouring liquids. Threaded
brass insert screws into 2” drum bung or tank cap.
All polyethylene construction won’t rust or corrode. Provides excellent chemical resis-
tance. Hinged, lockable lid prevents unauthorized access. Larger style (Part # 0656)
provides bigger pouring area and easy access.
FUNNELS
6
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SPILL SCOOTER
Dispensing drums while transporting them around the plant is no longer a problem. The Spill Scooter provides
secondary containment for incidental spills and drips which often occur during
vertical dispensing applications. Incidental spills and drips are contained in
the well, with a spout for easy draining. The Spill Scooter fits all drums up to
55 gallons. Made of 100% polyethylene, the Spill Scooter will not rust or
corrode. Features a built-in bung fitting holder.
Optional metal T-Handle (Product No. 5206-BK) available
POLY-SPILLCART
Transporting 55-gallon drums, 5-gallon pails, paint cans and other
materials around your plant has never been easier. Poly-Spillcart
eliminates the risk of spills during transport with its 57-gallon sump
capacity.
Poly-Spillcart’s caster wheels let you move around freely, while its
ergonomically-designed handle makes maneuvering a breeze. A tray
for tool storage keeps tools clean and handy. The structural foam grate
removes for easy cleaning and a drain plug lets you drain the sump
without effort. (Also available as an All-Terrain cart).
Part #: 5200-YE
Part #: 5200-YE-A (all terrain)
Dimensions w/ Handle: 66.5” L x 29” W x 43.88” H
Dimensions w/o Handle: 62.75” L x 29” W x 13.13” H
Weight: 120 lbs. (All Terrain 126 lbs)
Load Bearing Capacity UDL: 500 lbs.
Sump Capacity: 57 gal.
Regulations: EPA 40 CFR 264.175, SPCC and NPDES
SECONDARY CONTAINMENT
7
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
POLY-DOLLY
A U-shaped barrel platform and double looped strap make for easy loading. A
lightweight design, kick plate, and rolled-grip handles make for easy tipping.
Large 10” wheels and ergonomic design make transport trouble free. Transport
55 gallon drums with ease, tilt to become an efficient self-dispensing station and
acts as its own secondary containment unit. Made of long-lasting tough
polyethylene, will not rust or corrode.
Part #: 5300-YE Universal Well
Dimensions: 69”L x 31.75”W x 26.5”H, Liner
Weight: 98lbs
Load Bearing Capacity UDL: 600 lbs
Sump Capacity: 80 gal
Regulations: EPA 40 CFR 264.175, SPCC and NPDES
Part #: 5300-YE-A - Poly-Dolly ATD (all terrain), Part #: 6005-BK - Universal Well Liner
Part #: 5311-BK - Poly-Dolly Conversion Kit, Part #: 5300-TARP - Poly-Dolly Tarp
MULTI-PURPOSE RACKER/STACKER
Maximize floor space - one Multi-Purpose Racker/Stacker holds up to two 55 gallon
drums. The stackable unit allows you to store up to four 55 gallon drums. The
Racker/Stacker can be placed on the floor (no sump) or on the Poly-Slim Line 6000
pallet (Part # 5400-YE). Use with Poly Shelf (Part # 6003-YE) for easy dispensing.
Part #: 6004-YE
Dimensions: 48.5”L x 41”W x 20”H
Weight: 87bs
Load Bearing Capacity UDL: 2400 lbs
Regulations: EPA 40 CFR 264.175 (*EPA compliant when used in conjunction with product #5400-YE)
SECONDARY CONTAINMENT
8
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SECONDARY CONTAINMENT
9
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
Ultra-SpillDeck Bladder Systems are low profile, polyethylene containment decks which
meet EPA and Uniform Fire Code Spill Containment Regulations. Available in 1, 2 and 4-
drum modules, the low 5 3/4 deck height allows safe and convenient drum loading, even
without drum handling equipment. Add the optional polyethylene loading ramp for even
greater handling ease. Rugged, double layer polyethylene bladder allows 66 gallons total
containment. Small spills and leaks are captured in the 11-gallon sump.
Large, catastrophic leaks flow into the bladder through a bulkhead fitting. Protective "trap
door" opens automatically to allow bladder to unfurl. The first and only low profile,
single-drum containment unit which meets EPA Container Storage Regulation 40 CFR
264.175 and Uniform Fire Code Spill Containment Regulations. Compact 25 7/8" x 30
1/2" footprint saves valuable floor space - perfect for single-drum waste collection usage
Part #: 2330 - P4 Bladder System Bladder Attachment: Part #: 2317, Weight: 4 lbs.
Dimensions: 52” x 56 5/8” x 5 3/4” Replacement Bladder: Part #: 6340, Weight: 2 lbs.
Weight: 66 lbs. Bladder Pump: Part #: 2345, Weight: 3 lbs.
Uniformly Distributed Load: 6,000 lbs. Loading Ramp: Part #: 1089, Weight: 35 lbs.
Containment Capacity: 99 gallons
Sump Capacity prior to spill entering bladder: 44 gal
ULTRA-SPILL DECKS - LOW PROFILE, MODULAR SPILLDECKS ALLOW YOU TO DESIGN AND CREATE
A CONTAINMENT SYSTEM THAT MEETS YOUR SPECIFIC NEEDS!
Ultra-Spill Deck P1, Part #: 1321 Ultra-Spill Deck P2, Part #: 1086
Dimensions: 25 7/8" x 25 7/8" x 5 3/4" Dimensions: 52" x 25 7/8" x 5 3/4"
Weight: 23 lbs. Weight: 40 lbs.
Uniformly Distributed Load: 1,500 lbs. Uniformly Distributed Load: 3,000 lbs.
Containment Capacity: 11 gallons Containment Capacity: 22 gallons
Ultra-Spill Deck P4, Part #: 1072 Ultra-SpillDeck Loading Ramp , Part #1089
Dimensions: 52" x 52" x 5 3/4" Dimensions: 24" x 32" x 5 3/4", 17 lbs
Weight: 70 lbs.
Uniformly Distributed Load: 6,000 lbs.
Containment Capacity: 44 gallons
SECONDARY CONTAINMENT
10
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
POLY-SLIM-LINE 6000
Poly-Slim-Line 6000 offers all of the same advantages as our Poly-SpillPallet 6000 … and more!
This addition to our pallet family features a low, 12” profile and a UDL load bearing capacity of
6,000lbs. Optional drain and tarp.
Part #: 5400-YE / Part #: 5400-YE-D (with drain)
Dimensions: 54”l x 54”w x 12”h
Weight: 91 lbs Load Bearing Capacity UDL: 6000lbs
Sump Capacity: 66gal
EPA 40 CFR 264.175, SPCC, NPDES and UFC
POLY-SPILLPALLET 6000
Rated at 6,000lbs UDL weight with a 85 gallon sump capacity that meets EPA 40 cFR 264.175.
Square 50”x50” footprint saves space yet easily holds four 55 gallon drums. Includes the same
rugged features as the 2000. Forkliftable from all sides. Optional drain.
Optional Ramp: Part #: 5039-BK, Optional Ramp Extender: Part #: 5038-BK, Optional Tarp: Part #: 5001-TARP
SECONDARY CONTAINMENT
11
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
Nearly 50% lower than standard spill pallets, drum handling is safer and less strenuous.
Meets EPA Container Storage Regulation 40 CFR 264.175 and Uniform Fire Code Spill
Containment Regulations. Forkliftable, all-polyethylene construction. Removable grates
feature a non-slip surface. Available in 1, 2, 3 and 4-drum configurations.
ULTRA-TWIN IBC SPILL PALLET - SAVE MONEY - STORE TWO IBC TANKS SIDE-BY-SIDE
Use for intermediate bulk containers (IBCs), drums, or other large vessels (all materials stored must be chemically
compatible). Available with optional bucket shelf for either or both
sides - catches small leaks or spills during dispensing. Grates are
easily removed for quick clean up. One continuous sump holds
535 gallons - meets EPA Containment and SPCC Regulations for
two IBC tanks.
SECONDARY CONTAINMENT
12
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SECONDARY CONTAINMENT
13
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
ULTRA-TRACK PANS
CAPTURE HAZARDOUS SPILLS FROM
RAILROAD TANKER CARS AND LOCOMOTIVES
Optional TrackPan covers keep rainwater out of the pans, providing effective Stormwater Management.
Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock
into the polyethylene decking and will not blow off in windy conditions. Unique stormwater feature is designed to eliminate
"pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of
the Pans.
Low Maintenance - unlike carbon steel track pans, Ultra-TrackPans will not rust or
corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the
sun.
Low Cost Installation - Lightweight TrackPans can be easily installed without heavy lifting
equipment ie: forklifts, cranes, backhoes, etc. Minimal tools and labor required.
Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in
mind. All top surfaces resist slips when wet or oily.
Long Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.
SECONDARY CONTAINMENT
14
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
360-gallon sump capacity meets EPA Container Storage Regulations. Optional PullOver Cover
keeps rainwater out of sump and helps comply with Stormwater Management Regulations (Part #: 1159). Four inner
polyethylene columns support uniformly distributed loads of up to 8,500 lbs. All components are easily removed for cleaning.
Optional Bucket Shelf (Part #: 1160) captures spills from dispensing. Spills that exceed 3 gallons are channeled into the 360-
gallon sump through a bulkhead fitting.
Part #: 1157 (no drain) Part #: 1160 - Ultra-Bucket Shelf
Part #: 1158 (with drain) Dimensions: 19 1/2" x 16" x 14 1/2"
Dimensions: 62" x 62" x 28" Weight: 10 lbs.
Weight: 280 lbs. Note: picture shown with optional Bucket Shelf - Part #: 1160
Containment Capacity: 360 gallons
Uniformly Distributed Load: 8,500 lbs.
SECONDARY CONTAINMENT
15
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
IBC SPACE-SAVER
Small footprint takes up minimal floor space! An efficient alternative for storing, dispensing and
containing IBC totes up to 275 gallons. With features like a solid polyethylene construction for high
chemical compatibility and a rugged, easily-removable integrated platform; drips, leaks and spills don’t
stand a chance.
The IBC 2000i is the only one-piece, lightweight, 100% polyethylene IBC spill
containment unit that is forkliftable and nestable for convenient shipment and storage,
and reduces shipping costs. The polyethylene construction will not rust or corrode or
have adverse reactions with chemicals. Available with or without drain.
POLY-SAFETYPACK
Safe, secure two-drum storage! This tough, indoor or outdoor performer protects two 55-
gallon drums while containing leaks with a 135-gallon sump capacity. Drum access and
removal is easy with unique gull-wing covers. Items inside are protected from the weather with
unique slide-over lid design.
Security locks are included to secure the covers and contents. 100% polyethylene has
excellent resistance to chemicals as well as weather. Translucent sidewalls allow for an
immediate view of liquids so you don’t need to open the lids to see if there’s been a leak.
Easily handled by forklift or pallet jack from two sides. Optional drain.
POLY-SAFETYPACK PLUS
This tough, indoor or outdoor performer protects two 55 gallon drums while containing leaks
with a 270 gallon sump capacity. Drum access and removal is easy with the unique gull-wing
covers. Items inside are protected from the weather with a unique slide-over lid design. The
54.25” inside height allows the lids to be closed with the pumps in place to create a versatile
pumping station where the convenience of leaving the pumps installed is important.
SECONDARY CONTAINMENT
16
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SECONDARY CONTAINMENT
17
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
Part #: 4062-YE
Part #: 4062-YE-D with drain
Dimensions Exterior: 60”L x 37.25”W x 72.63”H
Weight: 210 lbs
Load Bearing Capacity UDL: 2000 lbs
Sump Capacity: 58 gallons
Regulations: EPA 40 CFR 264.175, SPCC, NPDES and UFC
Part #: 4064-YE
Part #: 4064-YE-D with drain
Dimensions Exterior: 65”L x 58”W x 69”H
Weight: 269 lbs.
Load Bearing Capacity UDL: 6000 lbs
Sump Capacity: 66 gallons
Regulations: CPA 40 CFR 264.175, SPCC, NPDES, UFC
ULTRA-IBC HARDTOP
The upper roll-top door and lower swing-out doors combine to allow easy and convenient
access to IBC. Safely stores an IBC tank with maximum dimensions of 52”x52”x61”.
This low profile (28” height) allows safe material handling and dispensing. 360 gallon
containment sump. Forkliftable, lockable, all-polyethylene design will not rust or corrode.
SECONDARY CONTAINMENT
18
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
Hard Top P8 - Part #: 9650 (no drain), Part #: 9651 (with drain)
Dimensions: 126” x 62” x 79” / 815 lbs / capacity: 8ea 55 gallon drums
Hard Top P12 - Part #: 9652 (no drain), Part #: 9653 (with drain)
Dimensions: 188” x 62” x 79” / 1,190 lbs / capacity: 12ea 55 gallon drums
Hard Top P16 - Part #: 9654 (no drain), Part #: 9655 (with drain)
Dimensions: 250” x 62” x 79” / 1,565 lbs / capacity: 16ea 55 gallon drums
Hard Top P20 - Part #: 9656 (no drain), Part #: 9657 (with drain)
Dimensions: 312” x 62” x 79” / 1,940 lbs / capacity: 20ea 55 gallon drums
SECONDARY CONTAINMENT
19
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
AVAILABLE OPTIONS:
high capacity water tank
high capacity sump
high capacity pump
inline water heater system
electrical package in GP or C1D1/2 with interior
light, emergency activation button, alarm system
subzero insulation
mobile mount package
access ramp
ALSO AVAILABLE ARE UNINTERRUPTED WATER SUPPLY MODELS (for use when there is a continuous
water supply available) as well as MULTI-PURPOSE COMBINATION MODELS (combines storage areas,
change rooms, processing/dispensing area or decontamination capabilities and increased sump capacity)
20
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
STANDARD CONSTRUCTION
INCLUDES:
sloped roof assemblies
heavy duty oilfield sump construction
monolithic & divided containment sump
light weight, removable floor grating
heavy duty three point locking door hardware
SSPC 6 sandblasting preparation
2 part urethane enamel coating
OPTIONS AVAILABLE
electrical packages (call for details)
mechanical ventilation Designed to:
HVAC systems
ULC/ORD 142.6 “Storage Vaults”
OHS Standards 62/2003 Part 10, Section 165 Part 4, Section 27
shelving packages
Tested to NFPA 68, Chapters 4, 9 and 10
segregation of products
NFPA 30
access ramp
National Building Code
explosion venting National Fire Code
fire suppression
PG50 4’2” x 4’2” x 6’ 4’6” x 4’6” x 7’4” 1 - 42” x 60” 57 gallons 2,100 lbs
PG100 6’0” x 8’4” x 7’8” 6’8” x 8’11” x 9’4” 1 - 60” x 84” 165 gallons 3,900 lbs
PG150 8’ x 12’6” x 7’8” 8’7” x 13’1” x 9’4” 2 - 60” x 84” 335 gallons 5,600 lbs
PG200 8’ x 16’8” x 7’8” 8’7” x 16’9” x 9’4” 2 - 60” x 84” 375 gallons 6,100 lbs
PG250 8’ x 20’10” x 7’8” 8’7” x 21’7” x 9’4” 3 - 60” x 84” 550 gallons 8,100 lbs
PG450 8’ x 37’6” x 7’8” 8’7” x 38’1” x 9’4” 4 - 60” x 84” 980 gallons 13,500 lbs
21
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
HAZARD HUT
THE SOLUTION TO YOUR INDOOR STORAGE PROBLEM IS OUTDOOR
CONTAINMENT
When floor space is at a premium indoors, take your hazardous
materials outdoors with the Hazard Hut. One-piece molded 100%
polyethylene construction means there are no joints or seams to
leak. Molded-in side vents reduce fumes, while UV protection
makes it a durable performer outside. Removable grates make it
easy to clean and the 72-gallon sump capacity ensures leak and
spill containment.
The big double doors provide easy access for up to four 55-gallon
drums while their double-wall construction and heavy-duty hinges
and lock latches keep contents secure. Four-way forkliftable design
makes the Hazard Hut easy to handle. Door Opening 41.5" W x
48.5" H. Massive sump has removable structural foam grates for
easy cleaning. Optional ramp also available (Part #: 4001-BK).
Part #: 4000-YE
Exterior: 63.5” L x 68” W x 72.5” H / Interior: 53.75” L x 53.75” W x 52.25” H
Weight: 255 lbs.
Load Bearing Capacity UDL: 4000 lbs.
Sump Capacity: 72 gal.
Regulations: EPA 40 CFR 264.175, SPCC and NPDES
JOB HUT
OUTDOOR STORAGE HAS NEVER BEEN SO PRACTICAL...OR SO
AFFORDABLE!
The Job Hut is designed to act just like an extension to your
building. It’s big, safe and easy to use. An extra large storage
area lets you store up to eight 55-gallon drums on their pallets!
Low profile design allows for easy access. Forkliftable from all
sides. Tough polyethylene construction means it won’t rust or
corrode/UV inhibitors make it extra durable for outdoor use. 75-
gallon sump capacity eliminates the risk of spills or leaks, and
structural foam grates remove for easy cleaning. Molded-in
vents reduce fumes and condensation inside, while heavy-duty
hinges and lock keep contents secure. Optional multi-purpose
ramp facilitates loading your drums into the unit. Note: Job
Hut not fire rated.
Part #: 4010-YE (ramp not included - Part # 5111-BK)
Exterior Dimensions: 85.6" l x 61.5" w x 94" h / Interior Dimensions: 70" l x 51" w x 82" h
Weight: 502 lbs.
Load Bearing Capacity UDL: 8000 lbs.
Capacity: 72 gal.
Regulations: EPA 40 CFR 264.175, SPCC, NPDES and UFC
SECONDARY CONTAINMENT
22
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
POLY-SPILLPAD
Poly-Spillpad handles spent batteries, 5 gallon pails, 16 gallon drums and your messiest “smaller” jobs. Sturdy polyethylene
grate provides protection while vinyl berm spills contained.
POLY-LABTRAY
Poly-Labtray reduces spills and overflows of liquid and free-flowing powder chemicals during transfer of material in the labora-
tory. Its large surface holds four 1-gallon bottles (up to 40 lbs. static load weight) and the unit features up to 2.5 gallon sump
capacity, which also makes it perfect for mixing small containers at production sites. There are no metal parts to rust or cor-
rode.
Part #: 5248-YE
Dimensions Base: 25.5”L x 22”W x 3.25”H.
Dimensions Grate: 20.75”L x 17.25”W
Weight: 4 lbs.
Sump Capacity: 2.5 gallons
Load Bearing Capacity UDL: 40 lbs.
Regulations: EPA, SPCC and NPDES
ULTRA-UTILITY TRAYS
Keeps messy drips and spills off warehouse and factory floors. Heavy-duty
polyethylene construction - will not rust or corrode. Ribbed bottom keeps cans,
pails and other containers elevated above small spills or leaks. Nestable for
easy storage when not in use. Available in six sizes for a variety of applica-
tions.
Part #:
1031 12” x 48” x 4 3/4” ID, 12 gallons
1032 24” x 48” x 4 3/4” ID, 24 gallons Part #:
1033 30” x 48” x 4 3/4” ID, 30 gallons 1034 24” x 36” x 4 3/4” ID, 18 gallons
1035 36” x 36” x 4 3/4” ID, 27 gallons 1036 40” x 48” x 3 1/2” ID, 30 gallons
DRIP PAN
Keep work areas clean with these drip pans! Each drip pan holds up to 1 gallon of oils, coolants,
water or other non-aggressive liquids. Wide flat design for stability. Low profile 3" height fits al-
most anywhere. Ideal for keeping faucet areas clean. Packed 12 per carton.
Part #: 1670
Dimensions: 10.5” x 10.5” x 3”
SECONDARY CONTAINMENT
23
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
POLY-EDGE
Can be used as a truck-mounted carrier spill response unit or wall-mounted unit. Lockable
unit offers versatile storage for tools, absorbents, Stinger Berms and Prowler Pools. Avail-
able in black and yellow. Dimensions: 35”Lx20”Wx16”H and weighs 14lbs. Handling capac-
ity is 75 lbs.
PART #: 1601-BK
SECONDARY CONTAINMENT
24
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
MINI DRIPPER
This Mini Dripper is a collapsible, light-
weight, liquid waste container for use wher-
ever spill containment and clean-up opera-
tions are required. Foam supported side-
walls provide stability.
Constructed of dura-
ble, chemical resistant Part #: Width Length Height US Imp. Liters
material, the Mini Dripper can easily be placed Gallons Gallons
under pails, barrels, pumps and machinery to
MD18-6 18 18 6 8 7 30
catch drips and spills of liquid waste and hazard-
ous materials. Six inch sidewalls provide for the MD22-6 24 24 6 15 12 55
MD46-6 48 72 6 90 75 340
Custom sizes available.
MD56-6 60 72 6 110 90 425
LITTLE DRIPPER
Use the Little Dripper when you need to quickly deploy a chemi-
cal resistant spill container. Ideal for shop or field use.
- compact storage
- supported sidewalls
- tie-down grommets
- economical
25
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SECONDARY CONTAINMENT
26
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
DUCK PONDS
Duck ponds are perfect for projects where storage space is limited. Small
enough to fit in a cabinet or store on a shelf, a Duck Pond can hold various drum
sizes with ease and affordability. Providing both reliable and reusable secondary
containment for oils, fluids, and gasolines; ponds are easy to maneuver and can
withstand extreme cold temperatures to –55F/-48C.
The uses are endless. For quick response to leaking machines, preventative
maintenance, and emergency drips, ponds are the perfect quick-grab item that is rugged and ideal for small
areas for rapid deployment.
Duck Ponds are available in various sizes, contain a 4” low-profile sidewall, and are leak tested.
Part #: 5622-YE Part #: 5623-YE Part #: 5624-YE Part #: 5633-YE
Dim: 2’x2’x4” Dim: 2’x3’x4” Dim: 2’x4’x4” Dim: 3’x3’x4”
Sump: 10 gal Sump: 15 gal Sump: 20 gal Sump: 22.5 gal
Weight: 1 lb Weight: 3 lbs Weight: 4 lbs Weight: 5 lbs
The Standard Berm Repair Kit comes with 5ea 8”x11” peel and stick sheets.
Part #: 48-BRK (Standard)
The Deluxe Berm Repair Kit comes with
1ea professional heat gun, XR material 1 sq. yd. (black), PVC material 1 sq. yd. (yellow)
4ea replacement berm stays, 5ea peel and stick berm patches, 1ea rubber brayer roller
1ea cutting knife, 1ea locking tool box
SECONDARY CONTAINMENT
27
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
STINGER BERM - THE WORLDWIDE LEADER IN LARGE, AGGRESSIVE AND IMMEDIATE SPILL
RESPONSE
ENPAC’s Stinger Berm leads the industry with its wide range of sizes and capacities for large-scale spill containment. Stinger
Berms feature excellent rip, tear and puncture resistance for the most demanding application or terrain. Ground Pad and
TrackMat provide additional protection. Regulations: EPA, SPCC, NPDES
• Easy to assemble snap-up design permits immediate response
• Compact storage and transport
• Air-lance tested containment welds for maximum product performance
• Lap joint welds for maximum strength
• Individual serial numbers
• CAD designed and cut components
• Fuel/chemical resistant containment area
• Custom sizes and special materials available
• Cold rated to minus 30F - • Available in Arctic Grade, cold rated to -50F
Options include: Ground Pad, Tracmat, Storage and Transport Bag, Bazooka Trickle Filter, Filter System (additional sizes
available)
Part #: 4801-BK-SU Part #: 4802-BK-SU Part #: 4803-BK-SU
Dimensions: 4’L x 4’W x 8”H 4’L x 4’W x 1’H 4’L x 6’W x 8”H
Weight: 11 lbs. 25 lbs. 18 lbs.
Sump Capacity: 79 gal. 119 gal. 119 gal.
DRIPILLOW BERM
Have a small leak or spill? Dripillow Berm comes in four sizes to capture small leaks and drips, and with its stable weighted
base, it will not tip or splash in windy conditions. Designed to be utilized as a durable
and portable drip-pan, it is useable with all fuels and hydrocarbons, comes with a UV
protected pad, and can be folded for easy carrying. Eliminates nuisance drips under
vehicles, hydraulic lines, or equipment. Replaceable UV Resistant Pads available for
reorder. (Safety yellow is standard color. Available in other colors by special request).
• No tipping or splashing.
• Weighted unit can handle 40 mph winds.
• Folds for easy carrying.
• Replaceable UV protected pad available.
Part #: 5650-YE Part #: 5660-YE Part #: 5670-YE PART #: 5680-YE
Dimensions: 22”L x 22”W 24”L x 36”W 24”L x 54”W 38”L x 42”W
Weight: 7 lbs. 8 lbs. 9 lbs. 9 lbs.
Sump Capacity: 1 gal. 2 gal. 3 gal. 4 gal.
OFF-ROAD DRIPILLOW BERMS - Corner grommets and an additional weighted base allow for easy staking and added piece
of mind in high-wind and rugged terrain applications.
Part #: 5690-YE Part #: 5691-YE Part #: 5692-YE PART #: 5693-YE
Dimensions: 36”L x 36”W 36”L x 72”W 48”L x 48”W 48”L x 60”W
Weight: 12 lbs. 15 lbs. 19 lbs. 21 lbs.
Sump Capacity: 4 gal. 10 gal. 8 gal. 12 gal.
SECONDARY CONTAINMENT
28
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
SECONDARY CONTAINMENT
29
PROTECT OUR ENVIRONMENT To Order Call: 1-877-455-5336
TOLL FREE
1-877-455-5336
PROTECT OUR ENVIRONMENT
Head Office Calgary Warehouse
2395 Drew Road, Unit #1 4216-54th Avenue SE, Bays 3 & 4
Mississauga, Ontario L5S 1A1 Calgary, Alberta T2C 2E3
Toll Free 1-877-455-5336 Toll Free 1-877-455-5336
Phone (905) 293-9995 Phone (403) 236-0015
Fax (905) 293-9996 Fax (403) 236-0016
www.spilkleen.com
sales@spilkleen.com
COMPLIANCE: When it comes to handling, storing and disposing, you must comply with all local, provincial and federal regulations. Various fluids absorbed or con-
tained may be hazardous or toxic. Dispose according to the relevant government regulations.
CAUTION: Flammable and other hazardous liquids, under certain conditions can spontaneously ignite. Ensure that all personnel handling these materials do so with
caution and always wear protective clothing and respiratory devices.
It is the Purchasers sole responsibility to conduct testing to establish the suitability of any product for Purchaser’s intended use.
SpilKleen reserves the right to change, add to, and delete from its product line at any time without notice.
30