Katalog Befestigungstechnik 8 2014 Englisch 01

Keller
& Kalmbach
Fastening
technology
08/14
Fastening technology discount group overview
DG designation DG designation
201 Bolt anchor option 1 209 Stand-off fastening

2014 Fischer FAZ II zinc-plated, MKT BZ plus 2090 Fischer renovation wall tie anchor VBS-M,
zinc-plated VBS-8, Fischer weather shell renovation
2017 Fischer FAZ II stainless, MKT BZ plus stainless system FWS
202 Bolt anchor option 7 2091 Fischer VB wall tie anchor,
2024 Fischer EXA Fischer S 10 J and JS adjustment dowel,
2025 Fischer FBN II cpl. Fischer Thermax stand-off installation system
2027 MKT B cpl. 2093 Fischer F-S window frame dowel
203 Zinc-plated steel anchor 2094 KEW concrete frame screw, Koelner concrete
2030 Fischer TA M/SL M heavy-duty anchor, frame screw
2031 Fischer Zykon FZA, Fischer Zykon FZEA II 2096 Toge TU and TK window frame dowel
2033 Fischer accessories FZUB, FZEB, FZE plus, 2098 Fischer ASL distance screw,
Fischer FH II SB high-performance anchor Fischer l F-M metal frame screw,
2034 Fischer high performance anchor FH II Fischer FFSZ and FFS window frame screws,
2035 Sormat Liebig heavy-duty anchor Fischer JUSS adjustment screw
2037 MKT SZ and SL heavy-duty anchors 210 Scaffolding and insulation fasteners
204 Stainless steel anchor 2101 Fischer accessories for scaffolding and
2040 Fischer Zykon FZA, Fischer Zykon FZEA II insulation fasteners ADT, RI, DHM
2044 Fischer high performance anchor FH II 2103 Fischer insulation fastener
2046 MKT SZ and SL heavy-duty anchors DIPK, FIF-K/S, DVN, DHT, FID,FATB, FAFZH,
205 Concrete screw insulation plate
2050 Heco Multi Monti, Fischer U washer for FBS 2104 Fischer scaffolding fastener
2056 Fischer FBS GS, S 14 ROE, S 16 H, FI G, S 12 R, S 14 H
206 Steel dowel with approval 2105 Fischer insulation fastener
2060 Fischer FPX aerated concrete anchor DHK, DHM inox, DHM
2063 Fischer EA IM12 D hammerset anchor, 2107 Allfa insulation fastener
Fischer FNA II A4/C nail anchor, 211 Easy fastening
Fischer FHY hollow ceiling anchor, 2112 Fischer M-S, M, MS, GB, FMD, TB/TBB, FTP K,
Toge TD-N ceiling anchor FTP M, PA, P 9 K, Fix it, TS, FU,
2065 MKT N nail anchor, Fischer accessories for FTP EK, FTP EM,
Fischer FNA II zinc-plated nail anchor Fischer assortments UX, SX, S, TB, TBB, TS,
2066 Fischer hammerset anchor EA II FU, MKT DU
2067 MKT TDN/DZ ceiling nail 2114 TOX TRI, TRIKA, TFS
2068 Fischer FDN ceiling nail 2115 Fischer UX, SX, S, Mungo perforated brick dowel
2069 MKT hammerset anchor E 2117 Lüsebrink ceiling hook
207 Other steel dowels 2118 SMK brass dowel
2070 Fischer FWB expansion anchor, 2119 Fakkt universal dowel
Fischer FSA sleeve anchor, 212 Cavity fastener
Fischer FDBB diamond fastener, 2121 Fischer nylon toggle dowel K 54,
Fischer MR wall screw Fischer PD board anchor,
2071 Fischer accessories EA II SDS, EAW plus, Fischer GK and GKM plasterboard anchor
EA-ST, FNA S, FABS, Kölner Rawlbolt 2122 Fischer accessories for HM Z, GKW
2075 MKT accessories for hammerset anchors 2124 Fischer toggle and spring toggle anchors K, KD,
2078 MKT Easy hollow ceiling anchor, KDH, KM, Mungo plasterboard dowel
MKT ED hammerset anchor 2125 Allfa M, Allfa installation pliers KTS HDK, KTS,
208 Long-shaft dowel lamella nails
2081 Fischer FNH nail sleeve, 2126 Fischer cavity dowel HM
Fischer N A2 nail anchor, 2127 MKT GKD plasterboard dowel
MKT ND nail anchor 2128 SMK toggle anchor
2082 Fischer accessories for ADT, Fischer accessories 213 Chemical fasteners
for GBS, Fischer accessories for FFS A (cartridges)
2083 TOX VLF frame dowel 2130 Toge ATA cartridge
2084 Fischer SXR, SXRL, FUR, SXS, S frame dowels 2131 Fischer FIS VW, EM, Fischer fill & fix cartridge
2085 Fischer U washer, Allfa Quick nail sleeve 2132 Fakkt cartridge case set,
2087 Allfa nail anchor, Fakkt nail anchor, Kölner nail MKT cartridge case set
anchor, Don Quichotte Speedplug, flattener 2133 Fischer FHB II cartridge
2088 KTS KT frame dowel 2134 Fischer cartridge FIS V, HB, PM, SB,
2089 Fischer N zinc-plated nail anchor Fischer case sets
Fastening technology discount group overview
DG designation DG designation
2135 Sormat ITH VS cartridge 220 Sanitary fasteners

2136 MKT VMZ, VMU, PY, Fakkt VMU cartridge 2201 Fischer accessories for BU, AKM, HED
Fischer RSB, R M, UMV-P cartridge 2202 Fischer sanitary fasteners
2137 MKT V-P cartridge WDP 33, WCN, S 8 RD, WB 5N, WD, BO, WST,
214 Chemical fasteners UST, WL
(zinc-plated anchor rods) 2204 Fischer KM sanitary fasteners
2140 Fischer FRA, FIS PS anchor rod 221 Pipe clips
2142 Fischer FHB II, FHB II-A dyn. anchor rod 2211 Fischer FGRS plus, FRSL pipe clamps
2143 Fischer UMV-A dyn. anchor rod 2213 Fischer FGRS, FKS plus,
2147 Fischer FPB Set, RG, FIS A, MKT anchor rod FRS plus, FRS, FRSN, FRSK, KFT pipe clamps
VMU-A, VMU-AH, VMZ-A 2216 Fischer FRSH, FRSM, ETR, SGS pipe clamps
2148 MKT V-A, VM-A anchor rod 222 Installation system
215 Chemical fasteners 2221 Fischer fixed point and sliding elements
(stainless anchor rods) FFPS, FFPK, FSFP
2150 Fischer FHB II-A dyn. anchor rod 2222 Fischer accessories for installation systems
2151 Fischer FHB II anchor rod 2224 Fischer MS-L, MS, FUS assembly rails
2154 Fischer FPB Set, RG, FIS A, 2225 Fischer rail connections fixed point and sliding
MKT VMU-A anchor rod elements for systems
2157 MKT VMU-AH, VMZ-A, V-A anchor rod MS-L, MS, FUS, Fischer hanging material
216 Chemical fasteners 223 Stainless installation system
(internally threaded anchor) 2233 Fischer installation accessories for stainless
2160 Durabel TSM A steel product range
2161 Fischer FIS E 2236 Fischer A2/A pipe clamps4
2163 MKT VI-G zinc-plated 224 Air conditioning, ventilation, metal ceiling
2165 Fischer RG MI fasteners
2167 MKT VI-G A4, VMU-IG, VM-IG, VMU-AH 2241 Fischer MCE fasteners for air conditioners
217 Chemical fasteners (other) 2243 Fischer LGS ventilation duct clamps
2170 Toge accessories 2244 Fischer accessories for air conditioning,
2171 Fischer FCC ventilation, ceiling
2172 Accessories (application guns, mixers, 2245 MTH clamping plates, BS clamping plates
brushes, blowers, tapered drills, etc.) 2248 Fischer installation accessories for air
2173 Fischer FIS H sieve sleeve, conditioning, ventilation, ceiling, LKHN, LKH,
MKT VMU-SH sieve sleeve ZKHN, ZKH, LRBN, LRB, EMS, TZ, TZH“
2174 MKT VM-SH sieve sleeve 225 Fischer other
218 Wood connectors, nails, blocks 2250 Fischer SB assortment, Fischer pro assortment
2180 BTS disk dowel, Göbel cover caps, 2251 Fischer SB, pro assortment installation, Fischer
Harpun blocks stone drill, Fischer pro bits
2181 Gutzeit roof nail 2252 Fischer SDS Max plus II drilling tool, Fischer
2182 BTS spherical washer, Drakena rafter nails SDS Max I drilling tool
2183 Drakena wire and deck nails, Bentele rod 2254 Fischer SDS plus II drilling tool, Fischer bits
dowels, wall connection bolts, Honecker 2255 Fischer SDS plus IV drilling tool
knock-in cap 226 Direct installation
2185 Gutzeit wood connectors, Müller cover caps, 2261 Fischer driving bolts, Fischer formwork stop,
Scholtyschik post anchors, Simpson connectors Fischer film fastener, Fischer insulation holder,
and nails, Bierbach screws and nails Fischer ceiling fastener
2187 Don Quichotte nails
2189 Göbel rosettes
219 Electrical fasteners
2191 Fischer E-Fix products SHA, plus MS, WIC, WIS,
WI, WIZ
2193 Fischer E-Fix products LS, ZS, SD, KB, NS,
MNS, NSB, BN, Störing & Brückmann punched
strip
2194 Fischer BN/UBN cable ties,
Kunkel spacing clamps,
Störing & Brückmann eyelets
2197 Don Quichotte electrical fasteners, clamps,
multi-use clips, Fixpins, installation tape
Table of contents
Bolt anchors Other steel dowels

Fischer anchor bolt 766-772 Fischer nail anchor 812-814
FAZ II FNA II
MKT anchor bolt 773-779 MKT nail anchor 814-815

N

Fischer express anchor 780-781 Toge ceiling dowel 816

EXA TD-N
Steel anchor
Chemical fasteners

Fischer Zykon anchor 782-791 FAKKT injection system 817-826
FZA VMU 300 and 345

Fischer 787 Fischer Highbond 827-837

Zykon crampon fastener Composite mortar II

Fischer hammerset anchor 789 Fischer injection mortar 837

FZEA II Powerbond FIS PM 360 S
Fischer 791 Fischer Superbond 838-841

FDBB diamond drill fastener RSB mortar cartridges
Heavy-duty anchors

Fischer high performance anchor 792-795 Fischer injection mortar 842-845
FH II Superbond FIS SB 390 S

MKT heavy-duty anchor 796-797 Fischer reaction anchor 846-849

R

Liebig safety dowels 798-799 Fischer injection mortar 851-860
FIS V
Fischer dowels 800 Fischer anchor sleeves 861

TAM FIS
Other steel dowels

Fischer expansion anchor 800 Fischer UMV dynamic 862-863
FWB Expansion dowel

Fischer hammerset anchor 801-803 Fischer injection mortar for 864-866
EA II Rebar connection

MKT hammerset anchor 804-805 Fischer Thermax 867-873

E
MKT hollow ceiling dowel 805 Fischer fill & fix 879
EASY injection dowel

Brass expansion dowel 806 MKT composite anchor 880-882
V-P

Fischer aerated concrete anchor 806-807 MKT injection system 883-886

FPX -I VMZ

Multi-Monti wall 808-812 Asphalt fastener 889-890
concrete screw system Toge composite mortar
Table of contents
Long-shaft dowel Light fasteners
Fischer long-shaft dowel 891-898 Fischer 916
SXR GB aerated concrete dowels
Cavity fasteners

Fischer frame dowel 899-901 Fischer plasterboard dowel 917
FUR GK

KTS 902-904 Mungo Jet Plug 917

Frame facade dowel Plasterboard dowel

Fischer metal frame dowel 905 Fischer 918-919

HM cavity dowels

Toge metal frame dowel 905-906 Toggle dowels 919-920

Concrete frame screw 906-907 Fischer 920

FID insulation dowel
Scaffolding and insulation fasteners

FAKKT nail anchor 907-908 Insulation holder 920-921

Fischer nail anchor 908 Fischer scaffolding dowel 921

ROE
Light fasteners
TOTAL FIXX Combi 909 Scaffolding screws 921

Nail/screw/dowel
Blocks and wedges
ALLFA nail anchor 909 Adjustment blocks and 922-925
with sealing washer assembly wedges
Electrical fasteners

FAKKT nylon dowels 910 Cable/pipe clamps, 926-929
electrical insulation material
FAKKT universal dowel 910-911 Cable ties and 929-932

accessories

Fischer universal dowel 911-912 Fixpin 932-933
UX Impact nails
Fischer dowels 912 Punched installation strip 933

SX
Installation systems
Fischer dowels 913 Trapezoidal sheet metal 934-935

S fastener
Fischer dowels 913 MTH clamping plates 935

M-S
Tox TRI-/TRIKA 914-915 e h

BTS girder clamp 936
All-purpose dowel
f
c g
a b
Mungo 915 Sanitary installation technology 937-938

Perforated brick dowels and accessories

Table of contents
Installation systems
Rail fastener 944-957
and accessories
Other
Wood connector 944-957

Carpenter need
Nails 958

Assembly support 958
Bonding and filling

PU foams 960-967
and accessories

Silicone/acrylic, 968-973
Sealants and accessories
Rubber adhesive 974-983

Application guns 983-985

Racofix 985
quick installation mortar
Joint tapes 986-987

Compribands
Window connection film 988

Table of Contents
A page F page
Acrylic sealants 972-973 FAKKT VMU injection system sieve
Adjustment blocks 922-925 sleeve 826
Aerated concrete application Fischer FH II heavy-duty anchor 792-795
injection mortar 876-877 FH II high performance anchor 792-795
Allfa clamp nail 909 Fire protection silicone 977
Allfa insulation holder one-part IPM 920 Fischer aerated concrete application 876-877
Allfa insulation holder two-part KP 921 Fischer aerated concrete dowel GB 916
Allfa knock-in dowel with sealing Fischer aerated concrete injection
washer 909 mortar 876-877
Allfa nail anchors with sealing washer 909 Fischer anchor rod for reaction anchor 839-840, 847
Anchor rod for Fischer reaction anchor 839-840, 847 Fischer application devices for injection 878-879
Application devices for FAKKT VMU 826 Fischer cavity dowel HM 918-919
Application devices for Fischer injection 878-879 Fischer EXA anchor bolt 780-781
Application devices for MKT injection 888 Fischer EXA bolt anchor 780-781
Application guns 964, 983-985 Fischer express anchor EXA 780-781
Asphalt fastener 889-890 Fischer extension tube 874
Assembly adhesive 974-975, Fischer FAZ II anchor bolt 766-772
981-983 Fischer FAZ II bolt anchor 766-772
Assembly rails/accessories 939-942 Fischer FHB II anchor rod 831-837
Assembly support 958 Fischer FHB II injection mortar 827-830
Assembly wedges 922-925 Fischer FID insulation dowel 920
Fischer fill & fix injection dowel 879
B Fischer FIS A anchor rod 843-844, 856
Blocks 922-925 Fischer FIS EM epoxy resin mortar 864-866
Bracket connector 945 Fischer FIS EM rebar application 864-866
Brass expansion dowel 806 Fischer FIS EM rebar connection 864-866
Building chemistry 959-988 Fischer FIS EM subsequent
reinforcement 864-866
C Fischer FIS PM 360 S 837
Cable ties 930-932 Fischer FIS PM 360 S injection mortar 837
Concrete frame screw 906-907 Fischer FIS SB 390 S 842
Construction adhesive 974-975, Fischer FIS V 360 S injection mortar 851-855,
981-983 865, 876
Construction clamp 957 Fischer FNA II nail anchor 812-814
Fischer FPX-I aerated concrete anchor 806-807
D Fischer FUR frame dowel 899-901
Deck nail 958 Fischer FUR long-shaft dowel 899-901
Disk dowel 956 Fischer GB aerated concrete dowel 916
Fischer GK plasterboard dowel 917
E Fischer hammerset anchor EA II 801-803
EA II hammerset anchor 801-803 Fischer Highbond FHB II-P injection
EASY hollow ceiling dowel EASY 805 mortar 827-830
Electrical fasteners 926-929 Fischer Highbond FHB II anchor rod 831-837
Extension tube for Fischer injection 874 Fischer Highbond injection mortar 827-830
Fischer high performance anchor FH II 792-795
F Fischer HM cavity dowel 918-919
FAKKT application devices for VMU 826 Fischer injection mortar FIS V 360 S 851-855,
FAKKT knock-in dowel 907-908 865, 876
FAKKT nail anchor 907-908 Fischer injection push-through
FAKKT nylon dowels 910 anchor sleeve 861
FAKKT plastic dowel 910 Fischer injection sieve and anchor
FAKKT sieve sleeve for VMU 826 sleeve 874
FAKKT universal dowel 910-911 Fischer insertion tool RA-SDS 875
FAKKT VMU anchor rods 822-825 Fischer insulation dowels FID 920
FAKKT VMU injection system 817-821 Fischer internally threaded
anchor RG MI 841, 845,
848, 857
Table of Contents
F page I page
Fischer internal thread expansion Injection mortar for aerated concrete 876-877
anchor FWB 800 Installation foams 960-963, 967
Fischer M-S nylon dowels 913 Internal thread expansion anchor FWB 800
Fischer metal frame dowel FM 8 905
Fischer metal internally threaded sleeve 875 J
Fischer nail anchor N 908 Joint tape 986-988
Fischer N knock-in dowel 908 Joist hanger 948
Fischer N nail anchor 908
Fischer nylon dowels M-S 913 K
Fischer nylon dowels S 913 Kombi nail/screw dowel Total Fixx 909
Fischer plasterboard dowel GK 917 Kompri-Band 986-987
Fischer Powerbond injection mortar 837 KTS facade dowel type KT 902-904
Fischer R composite anchor 846 KTS frame/facade dowel type KT 902-904
Fischer RG MI internally threaded sleeve 841, 845,
848, 857 L
Fischer R mortar cartridge 846 Liebig anchor 798-799
Fischer ROE scaffolding dowel 921 Liebig heavy-duty anchor 798-799
Fischer R reaction anchor 846 Liebig safety dowels 798-799
Fischer RSB composite anchor 838 Lifting eye bolt for scaffolding dowels 921
Fischer scaffolding dowel ROE 921
Fischer sieve and anchor sleeve 874 M
Fischer S nylon dowels 913 MKT bolt anchor BU 779
Fischer Superbond injection mortar 842 MKT bolt anchors BZ plus 773-775
Fischer Superbond Mortar Cartridge MKT BU bolt anchor 779
RSB 838 MKT BZ bolt anchor 775-778
Fischer SXR frame dowel 891-898 MKT BZ plus anchor bolt 773-775
Fischer SXR long-shaft dowel 891-898 MKT composite anchor rod V-A 881-882
Fischer TAM heavy-duty anchor 800 MKT hammerset anchor E 804-805
Fischer Thermax 867-873 MKT heavy-duty anchor SZ 796-797
Fischer Thermax thermal separation 867-873 MKT hollow ceiling dowel EASY 805
Fischer UMV composite anchor 862 MKT N nail anchor 814-815
Fischer UMV dynamic anchor rod 863 MKT SZ heavy-duty anchor 796-797
Fischer UMV mortar cartridge 862 MKT V-A anchor rod 881-882
Fischer UMV multicone dyn. anchor rod 863 MKT V-A composite anchor rod 881-882
Fischer UMV reaction anchor 862 MKT V-P composite anchor 880
Fischer UX universal dowels 911-912 MKT V-P mortar cartridge 880
Fischer Zykon bolt anchor FZA 782-791 MKT V-P reaction anchor 880
FIS H K push-through anchor sleeve 861 MKT VMU Express injection mortar 887
Fix ALL adhesive and sealant 974-975, 983 MKT VMZ anchor rod 884-886
Fixpin impact nail 932-933 MKT VMZ composite anchor rod 884-886
Flat connector 945 MKT VMZ injection mortar 883
FNA II nail anchor 812-814 MTH Nova Grip clamping plates 935
Multi-Monti screw anchor 808-812
G Multi Monti concrete screw 808-812
Girder clamp 936 Mungo Fiber Jet plasterboard dowel 918
Glazing silicone 970-971 Mungo Jet Plug plasterboard dowel 917
Gun foam 960-963, 967 Mungo perforated brick dowel 915
Gun foam cleaner 965
N
H Nails 958
Hammerset anchor E 804-805 N nail anchor 814-815
Hammerset anchor EA II 801-803
Hammerset anchors 804-805 P
Heco Multi-Monti screw anchor 808-812 Perforated plate brackets 946
High temperature silicone 977-978 Perforated plats 944
Hollow ceiling dowel EASY 805
Table of Contents
P page W page
Pipe clips 937-938 Wedges 922-925
Post anchors 951-955 Wind bracing strap 947
Powerbond FIS PM 360 S 837 Wood connector 944-950
Primer 979
PU foam/PU gun foam 960-967 Z
Punched mounting strip 933 Zykon anchor 782-791
Punched strip 933 Zykon FZA bolt anchor 782-791
Push-in dowel 956
R
Racofix 985
Rafter anchor 949
Rafter nails 957
Ribbed nails 956
Roof nails 957
RSB mortar cartridges 838
RSB Superbond mortar cartridge 838
S
Scaffolding screw - lifting eye bolt 921
Screw nails 958
Sealing cap for scaffolding dowels 921
Sealing compound 968-983
Silicone sealing compounds and
accessories 968-972
Simplex wood connector 957
Steel nails 958
Summers 950
Superbond injection mortar 842
Suspension eye and pipe hanger 934
SXR Fischer long-shaft dowel 891-898
T
TAM heavy-duty anchor 800
TD-N ceiling dowels 816
Thermax thermal separation 867-873
Toge asphalt fastener 889-890
Toge ATA 2004C injection mortar 889-890
Toge ceiling dowel TD-N 816
Toge metal frame dowel TK 10 906
Toge metal frame dowel TU 10 905
Toge TD-N ceiling dowel 816
Toggle dowels 919-920
Total Fixx Combi nail/screw dowel 909
TOX TRI all-purpose dowels 914
TOX TRIKA all-purpose dowels 915
Trapezoidal sheet metal fastener 934-935
U
UMV multicone dynamic anchor rod 863
Universal adhesive and sealant 974-976
V
VMU-Express injection mortar 887
VMZ injection mortar 883
injection systems
Anchorings,
Heavy-duty anchors,
light and special fasteners,
chemical anchorings,
composite and injection systems
i FAZ II bolt anchor - powerful and flexible
Optionally with pre-installed normal

U washer or large GS U washer. NEW:
The distinct edge holds the Now also with HBS U washer accord-
expansion clip in its position ing to timber building standard DIN 1052
even when reinforcements The protruding insertion (not pre-installed).
are hit, thus ensuring secure pin protects the thread
installation. against damage during
setting. NEW
NEW
The interaction of cone and expansion clip The longer thread permits, for example,
increases the tensile load-bearing capacity stand-off installation, ensuring maximum
considerably and permits minimum edge and axial flexibility in application.
spacing.
For use with very high load requirements.
Drilled and installed faster Example of an application with a fixture thickness of 30 mm
The reduced anchoring depth makes it possible Very high load at standard anchoring depth
FAZ II 10/30
hef, stand 30 mm standard anchoring depth = 60 mm. Possible working length up
to 30 mm maximum with a permissible tensile load of 4.3 kN
and transverse load of 11.4 kN.
NEW
1.
Speedy installation thanks to reduced anchoring depth
FAZ II 10/10
reduced anchoring depth = 40 mm. Possible working length up
to 30 mm maximum with a permissible tensile load of 4.3 kN and
2. transverse load of 8.7 kN.
hef, red 30 mm
Powerful and flexible Advantages:

- reinforced expansion clip permits very high load-bearing
The FAZ II is suitable for pre- and push-through installation capacities, resulting in fewer fastening points and smaller
and also optimal for stand-off installation. When the nut is anchor bases being required
tightened, the cone bolt is pulled into the expansion clip - reduced anchoring depth (see example) permits considerably
and braces against the borehole wall. When the specified lower drilled hole depths, ensuring tangibly faster installation
torque is achieved, the anchor is set in compliance with the - few hammer blows and the minimum tightening slip ensure a
approval. perceivably simple and comfortable setting process
- international approvals guarantee maximum safety and very
high efficiency. Applications in earthquake zones (seismic) are
covered by these approvals as well
ETA-05/0069
ETAG 001-2
Option 1 für gerissenen Beton
Seismische Leistungskategorie C1
766 www.keller-kalmbach.com
i FAZ II K bolt anchor - powerful and flexible
The shorter bolt with reduced anchoring

depth is the economical choice for a variety
of applications, such as fastening cable lines
and facade substructures. NEW
The 10 new dimensions of the FAZ II K in a galvanically Optionally with normal U washer or
zinc-plated design as well as in stainless steel can be used large GS U washer.
up to a fixture thickness of 20 mm.
Short and practical Advantages:

- the properties of the K version significantly minimize the drill-
The FAZ II is suitable for pre- and push-through installation. ing effort as well as the hammer blows when the bolt anchor
The low borehole depth of the K version permits even faster is inserted; this saves energy and installation time
installation and reduces the number of reinforcement hits. - reinforced expansion clip permits a high load-bearing capac-
ity, even with a reduced anchoring depth. This ensures an
unbeatable price-performance ratio
- for the FAZ II 10 K (borehole diameter 10 mm), the tensile
loads are unchanged compared to the standard anchoring
depth, thus ensuring maximum performance
ETA-05/0069
ETAG 001- 2
Option 1 für gerissenen Beton

M10 - M12
1 2 3 4 5
order online: www.kk-shop.com 767

Fischer anchor bolts FAZ II (Standard-Version)
Approved by the building authorities: European Technical Approval, Option 1,

approval no. ETA-05/0069. Concrete C20/25 to C50/60, cracked. Concrete C20/25
to C50/60, non-cracked
Application: The Fischer FAZ II bolt anchors are used to fasten medium-weight to
heavy objects in concrete. Main areas of application include metal structures of all
kinds, wooden construction, substructures, machinery, devices and much more.
Properties: The Fischer FAZ II bolt anchors are suitable for pre-installation and push-
through installation and also optimal for stand-off installation thanks to the longer
thread. Applications in earthquake zones (seismic) are covered by these approvals
as well.
Installation instructions: Installation only permitted with torque wrench. When the
specified torque is achieved, the anchor is set in compliance with the approval.
Advantages:
- very high load-bearing capacities with few fastening points
- reduced anchoring depth for faster installation and lower borehole depth
- minimum tightening slip for a simple and comfortable setting process
- international approvals for maximum safety and very high efficiency (applications
in earthquake areas (seismic) are also covered by these approvals)
galvanized DG 2014
Item no. Type Drill Ø Min. Dowel Thread Ø Standard Reduced Price per Pack-
borehole length x length anchoring depth anchoring depth 100 age
depth for mm with correspond- with correspond- pieces con-
push- ing working ing working tents
through length length
installa- (working length = (working length =
tion clamping range) clamping range)
hef, stand. tfix hef, red. tfix
62640810 FAZ ll 8/10 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - • 50
626401010 FAZ ll 10/10 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm • 50
Continuation of Fischer anchor bolts FAZ II (Standard-Version)
Stainless
steel A4 DG 2017
borehole length x length anchoring depth anchoring depth 100 pieces age
depth for mm with correspond- with con-
push- ing working corresponding tents
through length working length
Steel, highly corrosion-resistant (C) DG 2017

borehole length x length anchoring depth anchoring depth 100 pieces age
depth for mm with correspond- with correspond- con-
push- ing working ing working tents
through length length

FAZ II HBS bolt anchor (with washer according to timber building standard DIN 1052)
galvanized DG 2014
Item no. Type Drill Ø Min. Dowel Thread Ø Standard Reduced U washer Price Pack-
(external
bore- length x length anchoring anchoring diameter x per age
hole mm depth with depth with thickness) 100 con-
mm
depth corresponding correspond- pieces tents
for working length ing working
push- (working length
through length = (working
installa- clamping length =
tion range) clamping
range)
h2 hef, stand. tfix hef, red. tfix

6264212100 FAZ ll 12/100 12 mm 190 mm 205 mm M 12 x 151 70 mm 100 mm 50 mm 120 mm 58 x 6.0 • 20
HBS
HBS
HBS
HBS
Fischer FAZ II GS with a large U washer
galvanized DG 2014
Item no. Type Drill Ø Min. Dowel Thread Ø Standard Reduced U washer Price Pack-
(external
bore- length x length anchoring anchoring diameter x per age
hole mm depth with depth with thickness) 100 con-
mm
depth corresponding corresponding pieces tents
for working length working length
push- (working (working
through length = length =
installa- clamping clamping
tion range) range)

62641810 FAZ ll 8/10 GS 8 mm 65 mm 75 mm M 8 x 38 45 mm 10 mm - - 22 x 2.5 • 50
626411010 FAZ ll 10/10 GS 10 mm 85 mm 95 mm M 10 x 53 60 mm 10 mm 40 mm 30 mm 25 x 3.0 • 50
Continuation of Fischer FAZ II GS anchor bolts with large U washer
Stainless
steel A4 DG 2017
Item no. Type Drill Ø Min. Dowel Thread Ø Standard Reduced U washer Price per Pack-
(external
bore- length x length anchoring anchoring diameter x 100 age
hole mm depth with depth with thickness) pieces con-
mm tents
depth corresponding corresponding
for working length working length
push- (working (working length
through length = = clamping
instal- clamping range)
lation range)
Fischer FAZ II K anchor bolt (short version)
galvanized DG 2014
Item no. Type Drill Ø Min. bore- Dowel Thread Ø Reduced U washer Price Pack-
hole depth length x length anchoring depth (external per age
for push- mm with corresponding diameter x 100 con-
through working length thickness) pieces tents
installation (working length =
clamping range)
h2 hef, red. tfix
6264031010 FAZ ll 10/10 K 10 mm 65 mm 75 mm M 10 x 33 40 mm 10 mm 19 x 1.8 mm • 50
Stainless
steel A4 DG 2017
Item no. Type Drill Ø Min. bore- Dowel Thread Ø Reduced U washer Price per Pack-
hole depth length x length anchoring depth (external 100 age
for push- mm with corresponding diameter x pieces con-
through working length thickness) tents
installation (working length =
clamping range)
h2 hef, red. tfix

Fischer FAZ II K anchor bolt (short version with large U washer)
zinc-plated, large washer DG 2014

Item no. Type Drill Ø Min. bore- Dowel Thread Ø Reduced U washer Price Pack-
hole depth length x length anchoring depth (external per age
for push- mm with corresponding diameter x 100 con-
through working length thickness) pieces tents
installa- (working length =
tion clamping range)
h2 hef, red. tfix
6264051010 FAZ ll 10/10 GS 10 mm 65 mm 75 mm M 10 x 33 40 mm 10 mm 25 x 3.0 mm • 50
6264051210 FAZ ll 12/10 GS 12 mm 80 mm 90 mm M 12 x 41 50 mm 10 mm 30 x 3.0 mm • 20
i Loads for Fischer FAZ II galv. zinc-plated / stainless steel A4 /

highly corrosion-resistant steel C
minimum spacing while
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25) the load is simultaneously
reduced
Type effective minimum installation permissible permissible necessary edge spacing necessary min. axial min. edge
anchoring component torque tensile load transverse (at an edge) for max. load axial spacing spacing spacing
depth thickness load for max. load
hef hmin Tinst Nperm2) Vzu2) Tensile load Transverse scr smin4) cmin4)
[mm] [mm] [Nm] [kN] [kN] c5) load [mm] [mm] [mm]
[mm] c
[mm]
FAZ II 8 80 170
45 20 2.4 6.9 40 140 35 40
100 150
FAZ II 10 40 80 8.7 60 220 120 45
100 45 4.3 60 250 40 60
60 11.4 180
120 45 225 45
FAZ II 12 50 100 6.1 13.9 75 315 150 55
50
120 60 335 60
70 7.6 16.9 75 210
140 310 55
FAZ II 16 65 9.0 20.7 100 380 195 65
140
110 585 80 65
85 13.4 31.4 130 260
170 525 65
FAZ II 20 160 680 125 125
100 200 17.1 40.0 150 300
200 600 95 85
FAZ II 24 200 725 150 135
125 270 24.0 49.1 190 380
250 640 100 100
The entire ETA - 05/0069 approval notice is to be observed for the measurement.
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect γF = 1.4 are taken into consideration.
2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).
3) At higher concrete strengths up to C50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.
4) For smin, the associated value c and for cmin, the associated value s can be found in the approval.
5) A split reinforcement is assumed that limits the crack width, taking account of the splitting forces, to Wk ~ 0.3 mm.
MKT bolt anchors BZ plus

cracked concrete, approval no. ETA-99/0010 M 8 to M 24 for galvanically zinc-plated
steel.
Application: The MKT BZ-Plus bolt anchors are used to fasten medium-weight
to heavy objects in concrete. Main areas of application include metal structures,
wooden construction, substructures of wall paneling, machines and devices and
much more.
Properties: The MKT BZ-Plus bolt anchors can be installed in push-through
procedure. The small bore diameter ensures time-saving installation.
Installation instructions: Installation only permitted with torque wrench.
Advantages:
- 3-part expansion clip for optimal contact pressure against the borehole wall
- small bore diameter
- time-saving, economical installation
-a re permitted for higher tensile and transverse loads as well as for small axial and
edge spacing in comparison with various competitors
galvanized DG 2014
Item no. Type Thread Drill Ø Overall Clamp- Bore- Setting Price per Pack-
length ing hole depth 100 pieces age
range, depth con-
max. tents
62117810 BZ 8/10/75 M8 8 mm 75 mm 10 mm 60 mm 52 mm • 100
62117815 BZ 8/15/80 M8 8 mm 80 mm 15 mm 60 mm 52 mm • 100
62117830 BZ 8/30/95 M8 8 mm 95 mm 30 mm 60 mm 52 mm • 100
621171010 BZ 10/10/90 M 10 10 mm 90 mm 10 mm 75 mm 68 mm • 50
621171015 BZ 10/15/95 M 10 10 mm 95 mm 15 mm 75 mm 68 mm • 50
621171020 BZ 10/20/100 M 10 10 mm 100 mm 20 mm 75 mm 68 mm • 50
621171030 BZ 10/30/110 M 10 10 mm 110 mm 30 mm 75 mm 68 mm • 50
621171050 BZ 10/50/130 M 10 10 mm 130 mm 50 mm 75 mm 68 mm • 50
62117701215 BZ 70 M12-15/110 M 12 12 mm 110 mm 15 mm 90 mm 80 mm • 25
62117701220 BZ 70 M12-20/115 M 12 12 mm 115 mm 20 mm 90 mm 80 mm • 25
62117701230 BZ 70 M12-30/125 M 12 12 mm 125 mm 30 mm 90 mm 80 mm • 25
62117701250 BZ 70 M12-50/145 M 12 12 mm 145 mm 50 mm 90 mm 80 mm • 25
62117701265 BZ 70 M12-65/160 M 12 12 mm 160 mm 65 mm 90 mm 80 mm • 25
62117701285 BZ 70 M12-85/180 M 12 12 mm 180 mm 85 mm 90 mm 80 mm • 25
621177012105 BZ 70 M12-105/200 M 12 12 mm 200 mm 105 mm 90 mm 80 mm • 25
621177012125 BZ 70 M12-125/220 M 12 12 mm 220 mm 125 mm 90 mm 80 mm • 25
621177012145 BZ 70 M12-145/240 M 12 12 mm 240 mm 145 mm 90 mm 80 mm • 20
621177012160 BZ 70 M12-160/255 M 12 12 mm 255 mm 160 mm 90 mm 80 mm • 20
621171615 BZ 16/15/135 M 16 16 mm 135 mm 15 mm 110 mm 97 mm • 20
621171625 BZ 16/25/145 M 16 16 mm 145 mm 25 mm 110 mm 97 mm • 20
621171650 BZ 16/50/170 M 16 16 mm 170 mm 50 mm 110 mm 97 mm • 20
6211716100 BZ 16/100/220 M 16 16 mm 220 mm 100 mm 110 mm 97 mm • 10
6211716140 BZ 16/140/260 M 16 16 mm 260 mm 140 mm 110 mm 97 mm • 10
6211716180 BZ 16/180/300 M 16 16 mm 300 mm 180 mm 110 mm 97 mm • 10
621172030 BZ 20/30/165 M 20 20 mm 165 mm 30 mm 125 mm 114 mm • 10
621172060 BZ 20/60/195 M 20 20 mm 195 mm 60 mm 125 mm 114 mm • 10
621172430 BZ 24/30/190 M 24 24 mm 190 mm 30 mm 145 mm 133 mm • 10
1 2 3 4
Continued on the next page

Continuation of MKT bolt anchors BZ plus
Approved by the building authorities: European Technical Approval,

Option 1, cracked concrete, M 8 to M 20 approval no. ETA-99/0010 for
stainless steel A4 and HCR 1.4529.
Application: The MKT BZ-Plus bolt anchors are used to fasten medium-weight
to heavy objects in concrete. Main application areas include metal structures
of all kinds and facade substructures.
Stainless steel A4 DG 2017

Item no. Type Thread Drill Ø Overall Clamp- Bore- Setting Price per Pack-
length ing hole depth 100 pieces age
range, depth con-
max. tents
62116810 BZ 8/10/75 A4 M8 8 mm 75 mm 10 mm 60 mm 52 mm • 100
62116815 BZ 8/15/80 A4 M8 8 mm 80 mm 15 mm 60 mm 52 mm • 100
62116830 BZ 8/30/95 A4 M8 8 mm 95 mm 30 mm 60 mm 52 mm • 100
621161010 BZ 10/10/90 A4 M 10 10 mm 90 mm 10 mm 75 mm 68 mm • 50
621161015 BZ 10/15/95 A4 M 10 10 mm 95 mm 15 mm 75 mm 68 mm • 50
621161030 BZ 10/30/110 A4 M 10 10 mm 110 mm 30 mm 75 mm 68 mm • 50
621161050 BZ 10/50/130 A4 M 10 10 mm 130 mm 50 mm 75 mm 68 mm • 50
62116701215 BZ 70 M12-15/110 A4 M 12 12 mm 110 mm 15 mm 90 mm 80 mm • 25
621161625 BZ 16/25/145 A4 M 16 16 mm 145 mm 25 mm 110 mm 97 mm • 20
621161650 BZ 16/50/170 A4 M 16 16 mm 170 mm 50 mm 110 mm 97 mm • 20
621162030 BZ 20/30/165 A4 M 20 20 mm 165 mm 30 mm 125 mm 114 mm • 10
621162060 BZ 20/60/195 A4 M 20 20 mm 195 mm 60 mm 125 mm 114 mm • 10
1 2 3 4
i Loads for MKT BZ-plus bolt anchors, galvanically zinc-plated / stainless steel A4
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25)
the load is simultaneously
with standard component thickness
reduced
Type Material effective minimum installation permissi- permis- necessary edge spacing necessary axial min. axial min. edge
anchoring com- torque ble tensile sible (at an edge) for max. load spacing for spacing spacing
depth ponent load transverse max. load
thickness load
hef hhr Tinst Nperm2) Vzu2) Tensile load Transverse scr smin4) cmin4)
[mm] [mm] [Nm] [kN] [kN] c load [mm] [mm] [mm]
[mm] c
[mm]
BZplus gzp 8.6 195
46 100 20 2.4 69 138 40 40
M8 A4 7.4 165
BZplus gzp 25 12.6 250 45 45
60 120 4.3 90 180
M10 A4 35 11.4 225 50 55
BZplus gzp 45 315
70 140 7.6 17.1 105 210 60 60
70 M12 A4 50 315
BZplus gzp 170 90 440
85 11.9 26.9 127.5 255 60 60
M16 A4 160 110 455
BZplus gzp 160
100 200 17.1 34.3 150 505 300 95 95
M20 A4 200
BZplus gzp 115 230 200 21.1 42.3 172.5 570 345 100 100
M24 A4 125 250 290 19.0 47.9 187.5 615 375 125 125
2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads with
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).
3) At higher concrete strengths up to C 50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.
i Loads for MKT BZ-plus bolt anchors, galvanically zinc-plated / stainless steel A4
Permissible loads1) of a single dowel in cracked normal concrete (concrete tension zone) of strength C20/253) (~B25)
with reduced component thickness (minimum component thickness
reduced
Type Material effective min. com- installation per per necessary edge spacing necessary min. axial min. edge
anchoring ponent torque missible missible (at an edge) for max. load axial spacing spacing spacing
depth thickness tensile transverse for max. load
load load
hef hmin Tinst Nperm2) Vperm2) Tensile load Transverse scr smin4) cmin4)
[mm] c
[mm]
BZplus gzp 8.6 220
46 80 20 2.4 69 138 40 40
M8 A4 7.4 185
BZplus gzp 25 12.6 280
60 100 4.3 90 180 45 50
M10 A4 35 11.4 250
BZplus gzp 45
70 120 7.6 17.1 105 340 210 60 60
70 M12 A4 50
BZplus gzp 90
85 140 11.9 26.9 127.5 490 255 70 80
M16 A4 110
2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads
3) At higher concrete strengths up to C 50/60, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.
MKT bolt anchors B

non-cracked concrete, approval no. ETA-01/0013 M 6 to M 20.
Application: The MKT B bolt anchors are used to fasten medium-weight to heavy
objects in concrete. Main areas of application include metal structures, wooden
construction, substructures of wall paneling, machines, devices and much more.
Properties: The MKT B bolt anchors can be installed in push-through procedure.
The small bore diameter ensures time-saving installation. The long cut thread makes
additional application possibilities possible, such as stand-off installation or longer
clamping ranges.
Advantages:
- various anchoring depths and therefore also applications at very low component
thicknesses are possible
Type B with threaded bolt and nut

galvanized DG 2027
Item no. Type Thread Drill Ø Overall Clamp- Setting Borehole Price Pack-
length ing range depth* depth* per 100 age
depending pieces con-
on setting tents
depth*
620616540 B 6-5-40 M6 6 mm 40 mm 5 mm 27 mm 35 mm • 100
62061610 B 6-10-20/67 M6 6 mm 67 mm 10 - 20 mm 49 - 39 mm 55 - 45 mm • 100
62061805 B 8/5/50 M8 8 mm 50 mm 5 mm 35 mm 45 mm • 100
62061810 B 8-10-19/75 M8 8 mm 75 mm 10 - 19 mm 56 - 47 mm 65 - 55 mm • 100
62061815 B 8-15-24/80 M8 8 mm 80 mm 15 - 24 mm 56 - 47 mm 65 - 55 mm • 100
62061830 B 8-30-39/95 M8 8 mm 95 mm 30 - 39 mm 56 - 47 mm 65 - 55 mm • 100
62061845 B 8-45-54/110 M8 8 mm 110 mm 45 - 54 mm 56 - 47 mm 65 - 55 mm • 100
62061855 B 8-55-64/120 M8 8 mm 120 mm 55 - 64 mm 56 - 47 mm 65 - 55 mm • 100
62061101060 B 10/10/60 M 10 10 mm 60 mm 10 mm 40 mm 50 mm • 50
620611010 B 10-10-16/85 M 10 10 mm 85 mm 10 - 16 mm 62 - 56 mm 70 - 65 mm • 50
620611015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50
620611020 B 10-20-26/95 M 10 10 mm 95 mm 20 - 26 mm 62 - 56 mm 70 - 65 mm • 50
620611045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50
620611070 B 10-70-76/145 M 10 10 mm 145 mm 70 - 76 mm 62 - 56 mm 70 - 65 mm • 50
620611205 B 12/5/75 M 12 12 mm 75 mm 5 mm 55 mm 55 mm • 25

Continuation of MKT B bolt anchor
galvanized DG 2027
Item no. Type Thread Drill Ø Overall Clamping Setting Borehole Price Pack-
length range depth* depth* per 100 age
depending on pieces con-
setting depth* tents
620611215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 82 - 67 mm 90 - 75 mm • 25
620611220 B 12-20-35/115 M 12 12 mm 115 mm 20 - 35 mm 82 - 67 mm 90 - 75 mm • 25
620611230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 82 - 67 mm 90 - 75 mm • 25
620611250 B 12-50-65/145 M 12 12 mm 145 mm 50 - 65 mm 82 - 67 mm 90 - 75 mm • 25
620611285 B 12-85-100/180 M 12 12 mm 180 mm 85 - 100 mm 82 - 67 mm 90 - 75 mm • 25
6206112105 B 12-105-120/200 M 12 12 mm 200 mm 105 - 120 mm 82 - 67 mm 90 - 75 mm • 25
6206112125 B 12-125-140/220 M 12 12 mm 220 mm 125 - 140 mm 82 - 67 mm 90 - 75 mm • 25
6206112145 B 12-145-160/240 M 12 12 mm 240 mm 145 - 160 mm 82 - 67 mm 90 - 75 mm • 20
6206112160 B 12-160-175/255 M 12 12 mm 255 mm 160 - 175 mm 82 - 67 mm 90 - 75 mm • 20
620611615 B 16/13/115 M 16 16 mm 115 mm 15 mm 84 mm 95 mm • 20
620611630 B 16-30-48/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20
620611660 B 16-60-78/180 M 16 16 mm 180 mm 60 - 78 mm 102 - 84 mm 110 - 95 mm • 20
6206116100 B 16-100-118/220 M 16 16 mm 220 mm 100 - 118 mm 102 - 84 mm 110 - 95 mm • 10
6206116130 B 16-130-148/250 M 16 16 mm 250 mm 130 - 148 mm 102 - 84 mm 110 - 95 mm • 10
6206116165 B 16-165-183/285 M 16 16 mm 285 mm 165 - 183 mm 102 - 84 mm 110 - 95 mm • 10
620612035 B 20-35-57/180 M 20 20 mm 180 mm 35 - 57 mm 121 - 99 mm 130 - 110 mm • 10
620612060 B 20-60-82/205 M 20 20 mm 205 mm 60 - 82 mm 121 - 99 mm 130 - 110 mm • 10

hot-dip
galvanized DG 2027
Item no. Type Thread Drill Ø Overall Clamp- Setting Borehole Price Pack-
length ing range depth* depth* per 100 age
depending pieces con-
on setting tents
depth*
620651015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50
620651045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50
620651215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 82 - 67 mm 90 - 75 mm • 25
620651230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 82 - 67 mm 90 - 75 mm • 25
620651630 B 16-30-48/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20
Option 7, non-cracked concrete M 6 to M 20, approval no. ETA-05/0018
stainless steel A4. European Technical Approval for multi-fastener M 6,
approval no. ETA-06/0155, stainless steel A4 and HCR 1.4529.
Application:
The MKT B bolt anchors are used to fasten medium-weight to heavy
objects in concrete. Main application areas include metal structures and
facade substructures.
Stainless
steel A4 DG 2027
Item no. Type Thread Drill Ø Overall Clamp- Setting Borehole Price per Package
length ing range depth* depth* 100 pieces contents
depending
on setting
depth*
62064610 B 6-10-20/67 M6 6 mm 67 mm 10 - 20 mm 49 - 39 mm 55 - 45 mm • 100
62064810 B 8-10-19/75 M8 8 mm 75 mm 10 - 19 mm 56 - 47 mm 65 - 55 mm • 100
62064815 B 8-15-24/80 M8 8 mm 80 mm 15 - 24 mm 56 - 47 mm 65 - 55 mm • 100
62064830 B 8-30-39/95 M8 8 mm 95 mm 30 - 39 mm 56 - 47 mm 65 - 55 mm • 100

Continuation of MKT B bolt anchor
Stainless
DG 2027
steel A4
Item no. Type Thread Drill Ø Overall
Clamp- Setting Borehole Price per Pack-
length
ing range depth* depth* 100 pieces age
depending con-
on setting tents
depth*
62064855 B 8-55-64/120 M8 8 mm 120 mm 55 - 64 mm 56 - 47 mm 65 - 55 mm • 100
620641010 B 10-10-16/85 M 10 10 mm 85 mm 10 - 16 mm 62 - 56 mm 70 - 65 mm • 50
620641015 B 10-15-21/90 M 10 10 mm 90 mm 15 - 21 mm 62 - 56 mm 70 - 65 mm • 50
620641020 B 10-20-26/95 M 10 10 mm 95 mm 20 - 26 mm 62 - 56 mm 70 - 65 mm • 50
620641045 B 10-45-51/120 M 10 10 mm 120 mm 45 - 51 mm 62 - 56 mm 70 - 65 mm • 50
620641215 B 12-15-30/110 M 12 12 mm 110 mm 15 - 30 mm 81 - 66 mm 90 - 75 mm • 25
620641230 B 12-30-45/125 M 12 12 mm 125 mm 30 - 45 mm 81 - 66 mm 90 - 75 mm • 25
620641250 B 12-50-65/145 M 12 12 mm 145 mm 50 - 65 mm 81 - 66 mm 90 - 75 mm • 25
620641630 B 16-30-46/150 M 16 16 mm 150 mm 30 - 48 mm 102 - 84 mm 110 - 95 mm • 20
620641660 B 16-60-78/180 M 16 16 mm 180 mm 60 - 76 mm 99 - 83 mm 110 - 95 mm • 20
620642035 B 20-35-57/180 M 20 20 mm 180 mm 35 - 57 mm 121 - 99 mm 130 - 110 mm • 10
*) Different clamping ranges can be selected depending on the anchoring depths. Please not the reduced loads at a reduced
setting depth.
1 2 3 4
i Loads for MKT bolt anchor B galv. zinc-plated

Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) the load is simultaneously
reduced
hef hmin Tinst Nperm2) Vperm2) Tensile load Transverse scr smin cmin
[mm] c
[mm]
B M6 40 100 8 4.1 2.9 50 50 120 35 40
B M8 44 100 15 5.7 6.3 85 95 132 40 45
B M10 48 100 30 7.6 8.0 115 120 144 55 65
B M12 65 130 50 12.6 14.3 165 185 195 75 90
B M16 82 170 100 17.8 23.6 205 260 246 90 105
B M20 100 200 200 24.0 37.1 250 375 300 105 125
3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval.

i Loads for MKT bolt anchor B steel, hot-dip galvanized
reduced
[mm] c
[mm]
B M10 48 100 30 7.6 8.0 115 120 144 55 65
B M12 65 130 40 12.6 14.3 165 185 195 75 90
B M16 82 170 90 17.8 23.6 205 260 246 90 105
i Loads for MKT bolt anchor B stainless steel A4

Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) for
standard anchoring depths
reduced
[mm] c
[mm]
B M6 40 100 6 3.6 4.0 80 65 120 35 35
B M8 44 100 15 5.7 6.9 110 105 132 35 45
B M10 48 100 25 7.6 8.0 120 120 144 45 55
B M12 65 130 50 11.9 15.4 170 200 195 60 70
B M16 80 160 100 17.2 28.6 205 335 240 80 80
B M20 100 200 160 24.0 43.9 280 450 300 100 100
2) A detailed dowel measurement, e.g. with the MKT dimensioning software, is required for combinations of tensile and transverse loads or for transverse loads
MKT bolt anchor BU

non-cracked concrete M12 and M16, approval no. ETA-01/0013 for galvanically
zinc-plated steel.
Application: The MKT BU bolt anchors with a large washer according to DIN 440
are primarily used in wooden construction for fastening purlins and for general
wooden structures.
Properties: The MKT BU bolt anchors can be installed in the push-through
procedure. The small bore diameter ensures time-saving installation. The long
cut thread also permits longer clamping ranges at lower anchoring depths.
Washers Ø at M 12 44 mm, washers Ø at M 16 56 mm.
Advantages:
- the large washers distribute the preload force to a larger surface and therefore
reduce pressing into mounting parts made of wood
- small borehole diameter
- various anchoring depths and therefore also applications at very low component
thicknesses are possible
Type BU with large washer DIN 440
galvanized DG 2027
Item no. Type Thread Drill Ø Overall Clamping Setting Borehole Price per Pack-
length range depth* depth* 100 pieces age
depending on con-
setting depth* tents
620661285 BU 12/85/180 M 12 12 mm 180 mm 85 - 100 mm 82 - 67 mm 90 - 75 mm • 25
6206612105 BU 12/105/200 M 12 12 mm 200 mm 105 - 120 mm 82 - 67 mm 90 - 75 mm • 25
6206612125 BU 12/125/220 M 12 12 mm 220 mm 125 - 140 mm 82 - 67 mm 90 - 75 mm • 25
6206612145 Bu 12/145/240 M 12 12 mm 240 mm 145 - 160 mm 82 - 67 mm 90 - 75 mm • 20
6206612160 BU 12/160/255 M 12 12 mm 255 mm 160 - 175 mm 82 - 67 mm 90 - 75 mm • 20
6206612190 BU 12/190/285 M 12 12 mm 285 mm 190 - 205 mm 82 - 67 mm 90 - 75 mm • 20
6206612230 BU 12/230/325 M 12 12 mm 325 mm 230 - 245 mm 82 - 67 mm 90 - 75 mm • 20
6206616165 BU 16/165/285 M 16 16 mm 285 mm 165 - 183 mm 102 - 84 mm 110 - 95 mm • 10
6206616200 BU 16/200/320 M 16 16 mm 320 mm 200 - 218 mm 102 - 84 mm 110 - 95 mm • 0
*) Different clamping ranges can be selected depending on the anchoring depths. Please not the reduced loads at a reduced
setting depth.
i Loads for MKT bolt anchor BU galv. zinc-plated

reduced
Type effective minimum installation permissible permissible necessary edge spacing (at necessary min. axial min. edge
anchoring component torque tensile load transverse an edge) for max. load axial spacing spacing spacing
[mm] c
[mm]
B M12 65 130 50 12.6 14.3 165 185 195 75 90
B M16 82 170 100 17.8 23.6 205 260 246 90 105

Fischer express anchor EXA

non-cracked concrete, M8 to M20 approval no. ETA-05/0185 for galvanically
zinc-plated steel.
Application: The Fischer EXA express anchors are used to fasten medium-weight
to heavy objects in concrete. Main areas of application include metal structures,
wooden construction, substructures of wall paneling, machines, devices and much
more.
Properties: The Fischer EXA express anchors can be installed in a push-through
procedure. The small bore diameter ensures time-saving installation.
Advantages:
galvanized DG 2024
Item no. Type Thread Drill Ø Overall Clamping Drilled hole Price per Package
length range, max. depth through 100 pieces contents
the compo-
nent to be
connected
62060610 6/10/70* M6 6 mm 70 mm 10 mm 70 mm • 100
62060640 6/40/100* M6 6 mm 100 mm 40 mm 100 mm • 100
62060805 8/5/60* M8 8 mm 60 mm 5 mm 60 mm • 50
62060815 8/15/82 M8 8 mm 85 mm 15 mm 80 mm • 50
62060828 8/28/95 M8 8 mm 98 mm 28 mm 95 mm • 50
62060855 8/55/122 M8 8 mm 125 mm 55 mm 120 mm • 50
620608100 8/100/167 M8 8 mm 170 mm 100 mm 165 mm • 50
620601005 10/5/70* M 10 10 mm 70 mm 5 mm 65 mm • 50
620601015 10/15/90 M 10 10 mm 92 mm 15 mm 85 mm • 50
620601045 10/45/120 M 10 10 mm 122 mm 45 mm 115 mm • 50
620601090 10/90/165 M 10 10 mm 167 mm 90 mm 160 mm • 50
6206010140 10/140/215 M 10 10 mm 217 mm 140 mm 210 mm • 25
620601205 12/5/80* M 12 12 mm 80 mm 5 mm 75 mm • 25
620601215 12/15/113 M 12 12 mm 116 mm 15 mm 105 mm • 25
620601235 12/35/133 M 12 12 mm 136 mm 35 mm 125 mm • 25
620601255 12/55/153 M 12 12 mm 156 mm 55 mm 145 mm • 25
620601285 12/85/183 M 12 12 mm 186 mm 85 mm 175 mm • 25
6206012105 12/105/203 M 12 12 mm 206 mm 105 mm 195 mm • 25
620601630 16/30/153 M 16 16 mm 153 mm 30 mm 140 mm • 10
620601675 16/75/198 M 16 16 mm 198 mm 75 mm 185 mm • 20
*) These sizes are not included in the approval.
1 2 3 4
i Loads for bolt anchor EXA galv. zinc-plated
reduced
anchoring component torque tensile load transverse an edge) for max. load. axial spacing spacing spacing
hef hmin Tinst Nperm2) Vperm2) c c scr smin4) cmin4)
[mm] [mm] [Nm] [kN] [kN] [mm] [mm] [mm] [mm] [mm]
EXA M8 47 100 14 4.1 6.2 110 90 141 45 40
EXA M10 49 100 30 6.3 8.2 155 125 147 50 65
EXA M12 67 135 60 9.9 11.0 190 135 201 75 90
EXA M16 85 170 80 16.7 27.8 185 310 255 85 90
EXA M20 103 205 140 24.8 40.9 255 410 309 105 100
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration.
i Loads for EXA bolt anchor galv. zinc-plated and

EXA-IG internally threaded anchor galv. zinc-plated / stainless steel A4
Permissible loads1) of a single dowel in non-cracked normal concrete (concrete tension zone) of strength C20/25 (~B25)
Type Material effective minimum installation recommended recommended char. char.
anchoring depth component torque tensile load transverse load axial spacing edge spacing
thickness
hef hmin Tinst Nrecom’d2) Vrecom’d2) scr,N csr,N
[mm] [mm] [Nm] [kN] [kN] [mm] [mm]
EXA M6 K gzp 24 70 5 1.5 1.6 72 36
EXA M8 K gzp 28 90 15 2.1 2.8 84 42
EXA M10 K gzp 30 100 25 3.0 4.0 90 45
EXA - gzp 3.4
45 100 8 1.5 135 68
IG M6 A4 2.7
EXA - gzp
45 110 15 4.0 2.6 135 68
IG M8 A4
EXA - gzp 7.4
45 120 25 3.9 135 68
IG M10 A4 6.6
EXA - gzp
75 150 50 12.3 6.3 225 113
IG M12 A4
1) Necessary safety factor is taken into consideration.

2) Detailed dowel dimensioning is required for combinations of tensile and transverse loads.

Fischer Zykon bolt anchor FZA

cracked concrete M 6 to M 16, approval no. ETA-98/0004 for galvanically zinc-plated
steel, stainless steel A4 and HCR 1.4529.
Application: The Fischer Zykon FZA bolt anchors are used to fasten heavy objects
in concrete. Main application areas include heavy metal structures, cable lines and
much more. Ideal anywhere where low setting depths and axial and edge spacing
are required.
Properties: Concrete undercut system. The Fischer Zykon bolt anchors FZA are set
in a pre-installation procedure. They have almost no expansion pressure and permit
very low anchoring depths and axial and edge spacing. Zykon anchors are offered in
3 designs (bolt anchor/pre-installation anchor - through anchor - internally threaded
anchor).
Advantages:
- almost free of expansion pressure, therefore minimum borehole depths, as well as
axial and edge spacing
- positive locking anchoring
- economical, single-stage drilling method for drilling the undercut
Shock approval from
Note: To create the tapered boreholes and to insert the dowel, it is necessary to use
the Federal Office for
original Fischer FZUB and FZE tools. Neither are included in the price of the Zykon
Civil Protection, Bonn
anchor.
galvanized DG 2031
Item no. Type Thread Drill Ø Clamping Anchoring Price per Package
range, max. depth 100 pieces contents
624601040 FZA 10/40 M 6/10 M6 10 mm 10 mm 40 mm • 25
624601240 FZA 12/40 M 8/15 M8 12 mm 15 mm 40 mm • 25
624601250 FZA 12/50 M 8/15 M8 12 mm 15 mm 50 mm • 20
624601440 FZA 14/40 M 10/25 M 10 14 mm 25 mm 40 mm • 25
624601880 FZA 18/80 M 12/25 M 12 18 mm 25 mm 80 mm • 10
6246022100 FZA 22/100 M 16/60 M 16 22 mm 60 mm 100 mm • 10
6246022125 FZA 22/125 M 16/60 M 16 22 mm 60 mm 125 mm • 6
Shock approval from


624621040 FZA 10/40 M 6/10A4 M6 10 mm 10 mm 40 mm • 25
624621240 FZA 12/40 M 8/15A4 M8 12 mm 15 mm 40 mm • 25
624621440 FZA 14/40 M 10/25A4 M 10 14 mm 25 mm 40 mm • 20
624621460 FZA 14/60 M 10/25A4 M 10 14 mm 25 mm 60 mm • 10
624621880 FZA 18/80 M 12/25A4 M 12 18 mm 25 mm 80 mm • 10
6246222100 FZA 22/100 M 16/60A4 M 16 22 mm 60 mm 100 mm • 10
1 2 3 4 5
i L
oads for ZYKON FZA undercut anchors galv. zinc-plated / stainless A4 /
minimum spacing while the
Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) load is simultaneously reduced
Type Material effective minimum instal- per per necessary edge necessary min. axial min.
anchoring com- lation missible missible spacing (at an edge) axial spacing spacing edge spacing
depth ponent torque tensile trans- for max. load. for max. load
thickness load verse
load
Tensile load Transverse

hef hmin Tinst Nperm2) Vperm2) ccr,N load scr smin cmin
[mm] [mm] [Nm] [kN] [kN] [mm] c [mm] [mm] [mm]
[mm]
gzp 4.6 95
FZA 10 x 40
A4 40 100 8.5 2.4 3.2 60 65 120 40 35
M6
C 4.0 85
gzp
FZA 12 x 40
A4 40 100 20 2.4 5.6 60 120 120 40 40
M8
C
gzp
FZA 14 x 40
A4 40 100 40 2.4 5.6 60 115 120 70 70
M10
C
gzp 7.9 160
FZA 12 x 50
A4 50 110 20 4.3 5.8 75 115 150 50 45
M8
C 7.3 145
gzp 13.3 250
FZA 14 x
A4 60 130 40 5.7 9.3 90 165 180 60 55
60 M10
C 11.6 215
gzp 19.3 315
FZA 18 x
A4 80 160 60 9.5 13.5 120 210 240 80 70
80 M12
C 16.9 270
gzp 34.3 500
FZA 22 x
A4 100 200 100 17.1 25.2 150 355 300 100 100
100 M16
C 31.4 455
gzp 35.9 450
FZA 22 x
A4 125 250 100 19.0 25.2 190 300 375 125 125
125 M16
C 31.4 385
3) At higher concrete strengths, permissible loads up to 55% higher are possible

Fischer Zykon FZA-D push-through anchor

cracked concrete M 6 to M 16, approval no. ETA-98/0004 for galvanically
zinc-plated steel, stainless steel A4 and HCR 1.4529.
Application: The Fischer Zykon FZA-D push-through anchors are used to fasten
heavy objects in concrete. Main application areas include heavy metal structures,
cable lines and much more. Ideal anywhere where low setting depths and edge
spacing are required.
anchor).
Advantages:
- almost free of expansion pressure, therefore very low borehole depths, as well as
axial and edge spacing Shock approval from
- positive locking anchoring the Federal Office for
-e conomical, single-stage drilling method for drilling the undercut Civil Protection, Bonn
anchor.
galvanized DG 2031
624701260 FZA 12/60 M 8D10 M8 12 mm 10 mm 50 mm • 25
624701480 FZA 14/80 M 10D20 M 10 14 mm 20 mm 60 mm • 10
6247014100 FZA 14/100 M 10D40 M 10 14 mm 40 mm 60 mm • 10
6247018100 FZA 18/100 M 12D20 M 12 18 mm 20 mm 80 mm • 10
6247022125 FZA 22/125 M 16D25 M 16 22 mm 25 mm 100 mm • 10
Shock approval from


624721260 FZA 12/60 M 8D10 A4 M8 12 mm 10 mm 50 mm • 25
624721280 FZA 12/80 M 8D30 A4 M8 12 mm 30 mm 50 mm • 25
624721480 FZA 14/80 M 10D20 A4 M 10 14 mm 20 mm 60 mm • 10
6247218100 FZA 18/100 M 12D20 A4 M 12 18 mm 20 mm 80 mm • 10
6247222125 FZA 22/125 M 16D25 A4 M 16 22 mm 25 mm 100 mm • 10
1 2 3 4 5
i Loads for ZYKON undercut anchors FZA-D galv. zinc-plated / stainless steel A4 /
highly corrosion-resistant C
Permissible loads1)3) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25) load is simultaneously reduced
Type Material effective minimum instal- per per necessary edge necessary min. axial min.
load

[mm]
gzp
FZA 12 x 50
A4 40 100 20 2.4 5.6 60 120 120 40 35
M8 D
C
gzp 7.9 160
FZA 12 x 60
A4 50 110 20 4.3 5.9 75 115 150 50 45
M8 D
C 7.3 145
gzp 7.9 160
FZA 12 x 80
A4 50 110 20 4.3 5.9 75 115 150 50 45
M8 D
C 7.3 145
gzp 13.3 250
FZA 14 x 80
A4 60 130 40 5.7 9.3 90 165 180 60 55
M10 D
C 11.6 215
FZA 14 x gzp 13.3 250
60 130 40 5.7 90 180 60 55
100 M10 D A4 9.3 165
gzp 19.3 315
FZA 18 x
A4 80 160 60 9.5 13.5 120 210 240 80 70
100 M12 D
C 16.9 270
gzp 19.3 315
FZA 18 x
A4 80 160 60 9.5 13.5 120 210 240 80 70
130 M12 D
C 16.9 270
FZA 22 x gzp 34.3 500
100 200 100 17.1 150 300 100 100
125 M16 D A4 25.2 355
2) A detailed dowel measurement, e.g. with our dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse loads
3) At higher concrete strengths, permissible loads up to 55% higher are possible. See approval. The concrete is assumed to be normally reinforced.

Fischer Zykon FZA-I internally threaded anchor

Application: The Fischer Zykon FZA-I internally threaded anchors are used to fasten
heavy objects in concrete. Main application areas include heavy metal structures,
cable lines and much more. Ideal anywhere where low setting depths and axial and
edge spacing are required.
anchor).
Advantages:
Shock approval from
anchor.
galvanized DG 2031
Item no. Type Thread Drill Ø Anchoring Screw-in Screw-in Price per Package
depth depth min. depth max. 100 pieces contents
624711460 FZA 14/60 M 8i M8 14 mm 60 mm 11 mm 17 mm • 20
624711880 FZA 18/80 M 10i M 10 18 mm 80 mm 13 mm 21 mm • 10
6247122100 FZA 22/100 M 12i M 12 22 mm 100 mm 15 mm 25 mm • 10
Shock approval from


Item no. Type Thread Drill Ø Anchoring Screw-in Screw-in Price per Package
depth depth min. depth max. 100 pieces contents
624731880 FZA 18/80 M 10i A4 M 10 18 mm 80 mm 13 mm 21 mm • 10
1 2 3 4 5
i Loads for ZYKON undercut anchors FZA-I galv. zinc-plated / stainless steel A4
Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/254) (~B25) load is simultaneously reduced
Type Material effective minimum instal- per per necessary edge spac- necessary min. axial min.
anchoring com- lation missible missible ing (at an edge) for axial spacing spacing edge spacing
depth ponent torque tensile trans- max. load. for max. load
load

[mm]
FZA 12 x 40 gzp 4.1 85
40 100 8.5 2.4 60 120 40 35
M6 I A4 3.2 65
FZA 12 x 50 gzp 4.1 75
50 110 8.5 4.3 75 150 50 45
M6 I A4 3.2 65
FZA 14 x 60 gzp 5.4 90
60 130 15 5.7 90 180 60 55
M8 I A4 4.3 75
FZA 18 x 80 gzp 9.5 5.6 85
80 160 30 120 240 80 70
M10 I A4 9.0 5.4 85
FZA 22 gzp 13.2 165
100 200 60 17.1 150 300 100 100
x100 M12 I A4 12.7 155
FZA 22 gzp 13.2 150
125 250 60 19.0 190 375 125 125
x125 M12 I A4 12.7 145
3) For screw strength class 8.8 (gzp) and A4-70 (A4).
Fischer Zykon anchor crampon fastener
Approved by the building authorities: The Zykon FZA anchor crampon fastener
is part of the general approval for Fischer Zykon anchor approval no. ETA-98/0004
and is regulated for fastening crampons in concrete and masonry according to
DIN 1211-3 and 1212-3.
Application: The Zykon FZA-ST crampon fasteners are used to fasten crampons
according to DIN 1211-3 and 1212-3.
Properties: Concrete undercut system. The Fischer Zykon FZA crampon fasteners
are set in a pre-installation procedure. They have almost no expansion pressure and
permit very low anchoring depths and axial and edge spacing.
Advantages:
original Fischer FZUB and FZE tools. Neither are included in the price of the crampon
fastener.

Item no. Type Thread Drill Ø Clamping Minimum Price Package
range anchoring per 100 contents
depth pieces
624611440 FZA 14/40 ST A4 M 10 14 mm 30 mm 40 mm • 20
624611460 FZA 14/60 ST A4 M 10 14 mm 30 mm 60 mm • 20

Fischer Zykon universal drill bit FZUB
Application: This tool is used to drill and undercut holes for the Fischer FZA Zykon
anchor as well as for the Fischer Zykon FZEA knock-in anchors.
Properties: The Zykon FZUB universal drill bit drills and undercuts in one work step
without the need to change tools.
Internally threaded anchor Through anchor Bolt anchors

DG 2033
Item no. Type for all 3 cyclone types Price per piece Package contents
with designation
624681040 FZUB 10/40 FZA 10/40 • 1
624681240 FZUB 12/40 FZA 12/40 • 1
624681250 FZUB 12/50 FZA 12/50 • 1
624681260 FZUB 12/60 FZA 12/60 • 1
624681280 FZUB 12/80 FZA 12/80 • 1
624681440 FZUB 14/40 FZA 14/40 • 1
624681460 FZUB 14/60 FZA 14/60 • 1
624681480 FZUB 14/80 FZA 14/80 • 1
6246814100 FZUB 14/100 FZA 14/100 • 1
624681880 FZUB 18/80 FZA 18/80 • 1
6246818100 FZUB 18/100 FZA 18/100 • 1
6246818130 FZUB 18/130 FZA 18/130 • 1
6246822100 FZUB 22/100 FZA 22/100 • 1
6246822125 FZUB 22/125 FZA 22/125 • 1
1 2 3 4 5
Fischer Zykon knock-in tool FZE plus
Application: The Zykon FZE plus knock-in tool is used to set Fischer Zykon anchors.
The centering pin for the internally threaded design is included.
DG 2033
with designation
6246510 FZE 10 plus FZA 10 • 1
6246512 FZE 12 plus FZA 12 • 1
6246514 FZE 14 plus FZA 14 • 1
6246518 FZE 18 plus FZA 18 • 1
6246522 FZE 22 plus FZA 22 • 1
Fischer Zykon hammerset anchor FZEA II

Application: The Fischer Zykon FZEA II hammerset anchors are used to fasten light
to heavy objects in concrete. Main application areas include suspending pipes, ven-
tilation ducts or sprinkler systems in sanitary, heating and ventilation engineering as
well as fastening suspended ceilings.
Properties: Low setting depths. Almost free of expansion pressure for minimum axial
and edge spacing. Easy, repeated loosening and refastening of fixtures is possible.
Advantages:
- concrete undercut, positive locking anchoring
- optical setting control using an impression on the edge of the dowel
original Fischer FZUB and FZED tools. Neither are included in the price of the ham-
merset anchor.
galvanized DG 2031
Item no. Type Thread Hole Ø Screw-in Price per Package
x dowel depth 100 pieces contents
length min./max.
626921040 FZEA II 10/40 M8 10/40 mm 11/17 mm • 100
626921240 FZEA II 12/40 M 10 12/40 mm 13/19 mm • 100
626921440 FZEA II 14/40 M 12 14/40 mm 15/21 mm • 50

Item no. Type Thread Hole Ø Screw-in Price per Package
x dowel depth 100 pieces contents
length min./max.
626931040 FZEA II 10/40 A4 M8 10/40 mm 11/17 mm • 100
626931240 FZEA II 12/40 A4 M 10 12/40 mm 13/19 mm • 100
1 2 3 4 5

Fischer Zykon universal drill bit FZUB
Application: This tool is used to drill and undercut holes for the Fischer FZA Zykon
anchor as well as for the Fischer Zykon FZEA knock-in anchors.
Properties: The Zykon FZUB universal drill bit drills and undercuts in one work step
without the need to change tools.
Internally threaded anchor Through anchor Bolt anchors

DG 2033
with designation
624681040 FZUB 10/40 FZA 10/40 • 1
624681240 FZUB 12/40 FZA 12/40 • 1
624681250 FZUB 12/50 FZA 12/50 • 1
624681260 FZUB 12/60 FZA 12/60 • 1
624681280 FZUB 12/80 FZA 12/80 • 1
624681440 FZUB 14/40 FZA 14/40 • 1
624681460 FZUB 14/60 FZA 14/60 • 1
624681480 FZUB 14/80 FZA 14/80 • 1
6246814100 FZUB 14/100 FZA 14/100 • 1
624681880 FZUB 18/80 FZA 18/80 • 1
6246818100 FZUB 18/100 FZA 18/100 • 1
6246818130 FZUB 18/130 FZA 18/130 • 1
6246822100 FZUB 22/100 FZA 22/100 • 1
6246822125 FZUB 22/125 FZA 22/125 • 1
1 2 3 4 5
Fischer setting tool FZED plus
Application: The Fischer FZED plus setting tool is used to set Fischer Zykon FZEA II
hammerset anchors.
DG 2033
Item no. Type for hammerset Price per piece Package contents
anchors
624781040 FZED plus 10/40 FZEA 10/40 • 1
624781240 FZED plus 12/40 FZEA 12/40 • 1
624781440 FZED plus 14/40 FZEA 14/40 • 1
i L
oads for ZYKON FZEA II hammerset anchor galv. zinc-plated / stainless steel A4 /
Permissible loads1)3) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25) load is simultaneously reduced
Type Material effective minimum Instal- per per necessary edge necessary min. axial min.
thickness load verse load
[mm]
gzp < 10 4.7 115 40 40
FZEA II 10 x
A4 40 80 < 15 1.6 5.6 60 140 120 45 45
40 M8
C < 15 5.6 140 50 50
gzp < 15 40 40
FZEA II 12 x
A4 40 80 < 20 3.0 5.6 60 135 120 45 45
40 M10
C < 20 50 50
gzp < 20 40 40
FZEA II 14 x
A4 40 80 < 40 3.6 5.6 60 135 120 45 45
40 M12
C < 40 50 50
3) For screw strength classes 8.8 (gzp), A4-70 (A4) and highly corrosion-resistant steel 1.4529 (C), strength 700 N/mm2.
Fischer diamond drill fastener FDBB
Application: The Fischer FDBB are used to temporarily fasten diamond core drills
and sawing machines in concrete and natural stone with dense microstructures.
The expansion element remains in the borehole after the machine is disassembled,
the spindle bolts can be reused with a new expansion element.
Properties: Made of galvanized steel. High load carrying capacity thanks to large
steel cross-section on the surface of the concrete. Very robust unit, also tolerates the
bolt becoming misaligned and the core drill bit suddenly tilting. Durable spindle bolt
thanks to protected internal thread and high-quality steel.
Advantage:
- economical thanks to reusability of the spindle bolts
Note: The clamping nuts included in the set are not offered by Fischer individually.
However, this is a normal clamping nut, as used in formwork construction and avail-
able at any construction site.
DG 2070
Item no. Type Hole Ø Clamping Min. depth Overall Anchoring Price per Package
range of drilled length depth piece contents
holes for
push-through
assembly
62510 FDBB Set - 16 mm 50 mm 135 mm 200 mm 60 mm • 1
16/50 M 6
625101 Expansion element 16 mm • 25
FDBB 16 SE
1 2 3 4
5 6

Fischer high-performance anchor FH II

steel and stainless steel A4.
Application: The Fischer FH II high-performance anchors are used to fasten heavy
objects in concrete. Main areas of application include heavy metal structures,
facade substructures, machinery, devices and much more.
Properties: The Fischer FH II high-performance anchors can be installed in the push-
through procedure and are available with hexagonal bolts (type S), with threaded
bolts (type B), with countersunk head (type SK) and with internal thread (type I).
The black plastic ring absorbs the tightening slip and serves to firmly press the
fixture to the anchoring base. This prevents the dowel from rotating as well.
Advantages:
- small axial and edge spacing
- type B, variable use, type S and SK with visually pleasing finish
- residue-free dismantling possible without cutting off the bolts
- type I, compliant installation without a torque wrench possible with visual setting
control
- type I, dismantling on the surface and removal of the dowel possible
- type I, optimum adaptation to the respective component by using customary
screws and threaded rods with metric thread
Type FH-S with hexagonal bolt

galvanized DG 2034
Item no. Type Thread Drill Ø Overall Clamping Minimum Min. depth of Price per Pack-
length range, anchoring drilled holes for 100 pieces age
max. depth push-through con-
assembly tents
627121010 FH II 10/10 S M6 10 mm 70 mm 10 mm 40 mm 65 mm • 50
627121510 FH II 15/10 S M 10 15 mm 106 mm 10 mm 70 mm 100 mm • 25
Type FH-B with threaded bolt and nut

Properties: Type B can easily be converted into tension or internally threaded an-
chors by screwing on ring nuts or internally threaded sleeves. The black plastic ring
absorbs the tightening slip and serves to firmly press the fixture to the anchoring
base. This prevents the dowel from rotating as well.
galvanized DG 2044
assembly tents
627131010 FH II 10/10 B M6 10 mm 70 mm 10 mm 40 mm 65 mm • 50
627131510 FH II 15/10 B M 10 15 mm 110 mm 10 mm 70 mm 100 mm • 25
Continuation of Fischer FH II high-performance anchor
galvanized
with threaded bolt and nut type FH-B DG 2034
Item no. Type Thread Drill Ø Overall Clamp- Minimum Min. depth of Price per Pack-
length ing anchoring drilled holes for 100 pieces age
range, depth push-through con-
max. assembly tents
Type FH-SK with countersunk head (zinc-plated)
Properties: Mounting on the surface using countersunk screw. The black plastic
ring absorbs the tightening slip and serves to firmly press the fixture to the anchoring
galvanized DG 2034
max. assembly tents
6217141015 FH II 10/15 SK M6 10 mm 65 mm 15 mm - 70 mm • 50
6217141515 FH II 15/15 SK M 10 15 mm 100 mm 15 mm - 105 mm • 25
Type FH-SK with countersunk head (stainless steel)
Properties: Mounting on the surface using countersunk screw. The black plastic
ring absorbs the tightening slip and serves to firmly press the fixture to the anchoring
Stainless
steel A4 DG 2044
max. assembly tents

Continuation of Fischer FH II high-performance anchor
Type FH-I with internal thread
Properties: Mounting on the surface using countersunk screw.
The black plastic ring absorbs the tightening slip and serves to firmly
press the fixture to the anchoring base. This prevents the dowel from
rotating as well.
galvanized DG 2034
assembly tents
621715126 FH II 12/M 6 I M6 12 mm 77.5 mm - - 85 mm • 25
621715128 FH II 12/M 8 I M8 12 mm 77.5 mm - - 12 mm • 25
6217151510 FH II 15/M 10 I M 10 15 mm 90 mm - - 95 mm • 25
6217151512 FH II 15/M 12 I M 12 15 mm 90 mm - - 95 mm • 20
1 2 3 4
i Loads for high-performance anchor FH II galvanically zinc-plated / stainless steel A4

Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) the load is simultaneously
reduced
anchoring component torque tensile load transverse an edge) for max. load. axial spacing spacing spacing
hef hmin Tinst Nperm2) Vperm2) ccr,N load scr smin4) cmin4)
[mm]
FH II 10 40 80 10 (15)5) 3.6 4.3 60 100 120 45 40
FH II 12 60 120 17, 56) / 22.57) 5.7 15.9 (15.4)9) 9ß 320 (310)9) 180 50 50
/ 258)
FH II 15 70 140 40 (38)6) 7.6 20.1 105 365 210 60 60
FH II 18 80 160 80 (100)8) 11.9 24.5 120 410 240 70 70
FH II 24 100 200 160 (120)6) 17.1 34.3 150 495 300 80 80
FH II 28 125 250 180 24.0 47.9 188 610 375 100 100
FH II 32 150 300 200 31.5 63.0 225 720 450 120 120
5) Only applies to FH II S A4.
6) Only applies to FH II B.
7) Only applies to FH II S, SK and H.
8) Only applies to FH II A4.
9) Only applies to FH II B and H.
i Loads for high-performance internal thread FH II-I galvanically zinc-plated / stainless steel A4
Permissible loads1)3) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25) the load is simultaneously
reduced
Type Material effective minimum instal- permissible permissible necessary edge spacing necessary min. axial min. edge
anchoring component lation tensile load transverse (at an edge) for max. load. axial spacing spacing spacing 7)
depth thickness torque load for max. load
Tensile Transverse
hef hmin Tinst6) Nperm2) Vperm2) load load scr smin5) cmin5)7)
[mm] [mm] [Nm] [kN] [kN] ccr,N c [mm] [mm] [mm]
[mm] [mm]
FH II - I 12 gzp 4.6 80
60 125 15 4.3 50 180 50 50
/ M6 A4 / C 3.2 60
FH II - I 12 gzp 8.0 145
60 125 15 4.3 50 180 50 50
/ M8 A4 / C 6.0 105
FH II - I 15 / gzp 13.1 220
70 150 25 5.7 60 210 60 60
M10 A4 / C 9.2 145
FH II - I 15 / gzp
70 150 25 5.7 13.7 60 230 210 60 60
M12 A4 / C
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration. Dowels with
axial spacing of s ≥ 3 x hef are considered single dowels.
6) installation torque when the internally threaded anchor is set. As an alternative to applying a installation torque, the anchor can be tightened to 3-5 mm shelter to
the concrete surface.
7) Without reduction of the permissible tensile load.
MKT heavy-duty anchor SZ

steel and stainless steel A4 M 8 - M 16.
Application: The MKT SZ heavy-duty anchors are used to fasten heavy objects in
concrete. Main areas of application include heavy metal structures, facade substruc-
tures, machinery, devices and much more.
Properties: The MKT SZ heavy-duty anchor can be installed in a push-through proce-
dure and is available with hexagonal bolts (type S), threaded bolts (type B) or counter-
sunk heads (type SK). Nothing to trip over with type SK. Type B can easily be con-
verted into tension or internally threaded anchors by screwing on ring nuts or internally
threaded sleeves. The red plastic ring absorbs the tightening slip and serves to firmly
press the fixture to the anchoring base. This prevents the dowel from rotating as well.
Advantages:
- 3-part expansion sleeve for optimum hold in concrete
- type B, variable use, type S and SK with visually pleasing finish
Note: Special lengths can be produced on short notice by request by using long
threaded rods as well as spacer dowels with protruding threaded bolts.
Type S with hexagonal bolt
galvanized DG 2037
Item no. Type Thread Drill Ø Total length Clamp- Setting Min. depth of Price per Pack-
ing range, depth drilled holes 100 pieces age
max. for push- con-
through tents
620041010 SZ-S 10/10 M6 10 mm 75 mm 10 mm 60 mm 65 mm • 50
620041210 SZ-S 12/10 M8 12 mm 85 mm 10 mm 70 mm 80 mm • 50
620041230 SZ-S 12/30 M8 12 mm 105 mm 30 mm 70 mm 80 mm • 50
620041250 SZ-S 12/50 M8 12 mm 125 mm 50 mm 70 mm 80 mm • 0
620041515 SZ-S 15/15 M 10 15 mm 106 mm 15 mm 85 mm 95 mm • 25
620041525 SZ-S 15/25 M 10 15 mm 116 mm 25 mm 85 mm 95 mm • 25
620041545 SZ-S 15/45 M 10 15 mm 136 mm 45 mm 85 mm 95 mm • 25
620041810 SZ-S 18/10 M 12 18 mm 117 mm 10 mm 95 mm 105 mm • 20
620041820 SZ-S 18/20 M 12 18 mm 127 mm 20 mm 95 mm 105 mm • 20
620041840 SZ-S 18/40 M 12 18 mm 147 mm 40 mm 95 mm 105 mm • 20
620042420 SZ-S 24/20 M 16 24 mm 150 mm 20 mm 120 mm 130 mm • 10
620042450 SZ-S 24/50 M 16 24 mm 180 mm 50 mm 120 mm 130 mm • 10
Continuation of MKT heavy-duty anchor SZ

galvanized DG 2037
Item no. Type Thread Drill Ø Overall Clamping Setting Min. depth Price per Package
length range, max. depth of drilled 100 pieces contents
holes
620051010 SZ-B 10/10 M6 10 mm 77 mm 10 mm 60 mm 65 mm • 50
620051210 SZ-B 12/10 M8 12 mm 90 mm 10 mm 70 mm 80 mm • 50
620051230 SZ-B 12/30 M8 12 mm 110 mm 30 mm 70 mm 80 mm • 50
620051515 SZ-B 15/15 M 10 15 mm 111 mm 15 mm 85 mm 95 mm • 25
620051525 SZ-B 15/25 M 10 15 mm 121 mm 25 mm 85 mm 95 mm • 25
620051545 SZ-B 15/45 M 10 15 mm 141 mm 45 mm 85 mm 95 mm • 25
620051810 SZ-B 18/10 M 12 18 mm 122 mm 10 mm 95 mm 105 mm • 20
620051820 SZ-B 18/20 M 12 18 mm 132 mm 20 mm 95 mm 105 mm • 20
620051840 SZ-B 18/40 M 12 18 mm 152 mm 40 mm 95 mm 105 mm • 20
6200518100 SZ-B 18/100 M 12 18 mm 212 mm 100 mm 95 mm 105 mm • 10
620052420 SZ-B 24/20 M 16 24 mm 157 mm 20 mm 120 mm 130 mm • 10
620052450 SZ-B 24/50 M 16 24 mm 187 mm 50 mm 120 mm 130 mm • 10
Type SK with countersunk head

galvanized DG 2037
Item no. Type Thread Drill Ø Overall Clamping Setting Min. depth Price per Package
length range, max. depth of drilled 100 pieces contents
holes
62006106 SZ-SK 10/10 M6 10 mm 70 mm 10 mm 60 mm 65 mm • 50
620061510 SZ-SK 15/10 M 10 15 mm 95 mm 10 mm 85 mm 95 mm • 25
Other dimensions can be delivered at short notice from factory stock.
1 2 3 4
d1
45° Dimensions d1 d2 h
SK 10 M 6 (mm) 16.5 9.5 3.9
h
SK 12 M 8 (mm) 20.5 11.5 5.0
SK 15 M 10 (mm) 24.5 14.5 5.7
SK 18 M 12 (mm) 29.5 17.5 6.7
d2
i Loads for MKT SZ-S heavy-duty anchor galv. zinc-plated / stainless A4
reduced
Type Material effective minimum installation per per necessary edge spacing necessary axial min. axial min. edge
anchoring com- torque missible missible (at an edge) for max. load spacing for spacing spacing
depth ponent tensile transverse max. load
thickness load load
[mm] c
[mm]
SZ-S 10 M6 gzp 50 100 15 2.4 10.3 75 230 150 50 50
SZ-S 12 gzp 5.7 15.9 320 60 60
60 120 30 90 180
M8 A4 4.3 12.6 250 70 75
SZ-S 15 gzp 20.5 375 70 70
71 140 50 7.6 106.5 213
M10 A4 19.4 355 85 85
SZ-S 18 gzp 11.9 80 80
80 160 80 24.5 120 410 240
M12 A4 12.3 100 100
SZ-S 24 gzp 160 100 100
100 200 17.1 34.3 150 495 300
M16 A4 170 180 180
i Loads for MKT SZ-B heavy-duty anchor galv. zinc-plated / stainless A4

reduced
Type Material effective minimum installation per per necessary edge spacing (at necessary axial min. axial min. edge
anchoring com- torque missible missible an edge) for max. load spacing for spacing spacing
thickness load load
[mm] c
[mm]
SZ-B 10 M6 gzp 50 100 15 2.4 9.1 75 200 150 50 50
SZ-B 12 gzp 30 5.7 14.3 285 60 60
60 120 90 180
M8 A4 35 4.3 13.7 275 70 75
SZ-B 15 gzp 50 375 70 70
71 140 7.6 20.5 106.5 213
M10 A4 55 375 85 85
SZ-B 18 gzp 80 11.9 80 80
80 160 24.5 120 410 240
M12 A4 90 12.3 100 100
SZ-B 24 gzp 160 100 100
100 200 17.1 34.3 150 495 300
M16 A4 170 180 180
i Loads for MKT SZ-SK heavy-duty anchor galv. zinc-plated / stainless A4

reduced
Type Material effective minimum installation per per necessary edge spacing necessary axial min. axial min. edge
anchoring com- torque missible missible (at an edge) for max. load spacing for spacing spacing
thickness load load
[mm] c
[mm]
SZ-SK 10
gzp 50 100 10 2.4 10.3 75 230 150 50 50
M6
SZ-SK 12 gzp 25 5.7 15.9 320 60 60
60 120 90 180
M8 A4 17.5 4.3 12.6 250 70 75
SZ-SK 15 gzp 55 20.5 375 70 70
71 140 7.6 106.5 213
M10 A4 42.5 19.4 355 85 85
SZ-SK 18 gzp 70 11.9 80 80
80 160 24.5 120 410 240
M12 A4 50 12.3 100 100

Liebig safety dowels

cracked concrete M6 to M16, approval no. ETA-06/0108 for galvanically zinc-plated
Application: The Liebig safety dowels are used to fasten heavy objects in concrete.
Main areas of application include heavy metal structures, facade substructures, ma-
chinery, devices and much more.
Properties: The Liebig safety dowels can be installed in a push-through procedure
and are available with hexagonal bolts (type S), threaded bolts (type B) or counter
sunk heads (type SK). Nothing to trip over with type SK. Type B can easily be
converted into tension or internally threaded anchors by screwing on ring nuts or
internally threaded sleeves. Among other things, the curved washer is used to firmly
press the fixture to the anchoring base.
Advantages:
- guaranteed 2 cone expansion. Cylindrical expansion over the entire length of the
expansion sleeve
- visual installation inspection with the curved washer
- visually pleasing finish for the S and SK types
Note: Special lengths can be produced on short notice by request by using long
threaded rods as well as spacer dowels with protruding threaded bolts.
ETA - 06/0108
Type S with hexagonal bolt
galvanized DG 2035
Item no. Type Thread Drill Ø Overall Clamping Minimum Min. depth Price per Package
length range, anchoring of drilled 100 pieces contents
max. depth holes
6200110455 SM 6-10/45/5 M6 10 mm 70 mm 5 mm 45 mm 60 mm • 50
620011035 SM 6-10/45/15 M6 10 mm 80 mm 15 mm 45 mm 60 mm • 50
620011060 SM 6-10/45/40 M6 10 mm 105 mm 40 mm 45 mm 60 mm • 50
6200112555 SM 8-12/55/5 M8 12 mm 80 mm 5 mm 55 mm 70 mm • 25
620011240 SM 8-12/55/15 M8 12 mm 90 mm 15 mm 55 mm 70 mm • 25
620011265 SM 8-12/55/40 M8 12 mm 115 mm 40 mm 55 mm 70 mm • 25
6200115705 SM 10-15/70/5 M 10 15 mm 95 mm 5 mm 70 mm 85 mm • 25
620011545 SM 10-15/70/15 M 10 15 mm 105 mm 15 mm 70 mm 85 mm • 25
620011570 SM 10-15/70/40 M 10 15 mm 130 mm 4 mm 70 mm 85 mm • 10
620012050 SM 12-80/20/15 M 12 20 mm 123 mm 15 mm 80 mm 100 mm • 10
620012075 SM 12-20/80/40 M 12 20 mm 148 mm 40 mm 80 mm 100 mm • 10
620012555 SM 16-25/100/15 M 16 25 mm 155 mm 15 mm 100 mm 125 mm • 5
620012580 SM 16-25/100/40 M 16 25 mm 180 mm 40 mm 100 mm 125 mm • 5
Type B with threaded bolt and nut ETA - 06/0108
galvanized DG 2035
Item no. Type Thread Drill Ø Overall Clamping Minimum Min. depth Price per Package
length range, anchoring of drilled 100 pieces contents
max. depth holes
620021035 BM 6-10/45/15 M6 10 mm 8 mm 15 mm 45 mm 60 mm • 50
620021060 BM 6-10/45/40 M6 10 mm 105 mm 40 mm 45 mm 60 mm • 50
6200212555 BM 8-12/55/5 M8 12 mm 85 mm 5 mm 55 mm 70 mm • 25
620021240 BM 8-12/55/15 M8 12 mm 95 mm 15 mm 55 mm 70 mm • 25
620021265 BM 8-12/55/40 M8 12 mm 120 mm 40 mm 55 mm 70 mm • 25
620021545 BM 10-15/70/15 M 10 15 mm 110 mm 15 mm 70 mm 85 mm • 25
620021570 BM 10-15/70/40 M 10 15 mm 135 mm 40 mm 70 mm 85 mm • 10
620021595 BM 10-15/70/65 M 10 15 mm 160 mm 65 mm 70 mm 85 mm • 10
6200215120 BM 10-15/70/100 M 10 15 mm 195 mm 100 mm 70 mm 85 mm • 10
Continuation of Liebig safety dowels
Type BM with threaded bolt and nut
galvanized DG 2035
Item no. Type Thread Drill Ø Overall Clamping Minimum Min. depth Price Package
length range, anchoring of drilled per 100 contents
max. depth holes pieces
6200220805 BM 12-20/80/5 M 12 20 mm 120 mm 5 mm 80 mm 100 mm • 10
620022050 BM 12-20/80/15 M 12 20 mm 130 mm 15 mm 80 mm 100 mm • 10
620022075 BM 12-20/80/40 M 12 20 mm 155 mm 40 mm 80 mm 100 mm • 10
6200220100 BM 12-20/80/65 M 12 20 mm 180 mm 65 mm 80 mm 100 mm • 10
6200220125 BM 12-20/80/100 M 12 20 mm 215 mm 100 mm 80 mm 100 mm • 20
620022555 BM 16-25/100/15 M 16 25 mm 160 mm 15 mm 100 mm 125 mm • 5
620022580 BM 16-25/100/40 M 16 25 mm 185 mm 40 mm 100 mm 125 mm • 5
ETA - 06/0108
Type SK with countersunk head and hexagon socket
galvanized DG 2035
Item no. Type Thread Drill Ø Overall Clamping Minimum Min. depth Price Package
length range, anchoring of drilled per 100 contents
max. depth holes pieces
620031035 SK M 6-10/45/15 M6 10 mm 70 mm 15 mm 45 mm 60 mm • 50
620031060 SK M 6-10/45/40 M6 10 mm 95 mm 40 mm 45 mm 60 mm • 50
620031240 SK M 8-12/55/15 M8 12 mm 85 mm 15 mm 55 mm 70 mm • 25
620031265 SK M 8-12/55/40 M8 12 mm 110 mm 40 mm 55 mm 70 mm • 25
620031545 SK M 10-15/70/15 M 10 15 mm 100 mm 15 mm 70 mm 85 mm • 25
620031570 SK M 10-15/70/40 M 10 15 mm 120 mm 40 mm 70 mm 85 mm • 10
620032050 SK M 12-20/80/15 M 12 20 mm 110 mm 15 mm 80 mm 100 mm • 10
i Loads for safety dowels S, B, SK

With edge reinforcement
Permissible loads1) of a single dowel in cracked normal concrete of strength C20/25 (~B25)
load is simultaneously reduced
Type effective minimum installation permissible permissible necessary edge spacing min. axial min. edge
anchoring component torque tensile load transverse (at an edge) for max. tensile/ spacing spacing
depth thickness load transverse load
hef hmin Tinst Vperm Vperm Tensile load Transverse smin cmin
[mm] [mm] [Nm] [kN] [kN] ccr, N load [mm] [mm]
[mm] ccr, N
[mm]
B, S, SK M6 45 100 8 2.4 5.2 67.5 75 60 80
B, S, SK M8 55 110 15 3.6 7 82.5 95 100 100
B, S, SK M10 70 140 40 7.6 20.1 105 250 150 150
B, S, SK M12 80 160 70 12.3 24.5 120 275 200 200
B, S, SK M16 100 200 115 17.1 34.3 150 335 250 250
Without edge reinforcement
Permissible loads of a single dowel in cracked normal concrete of strength C20/25 (-B25)
Type effective minimum installation permissible permissible necessary edge spacing min. axial min. edge
anchoring component torque tensile load transverse (at an edge) for max. tensile/ spacing spacing
depth thickness load transverse load
hef hmin Tinst Vperm Vperm Tensile load Transverse smin cmin
[mm] [mm] [Nm] [kN] [kN] ccr, N load [mm] [mm]
[mm] ccr, N [mm]
B, S, SK M6 45 100 8 2.4 5.2 67.5 110 60 80
B, S, SK M8 55 110 15 3.6 7 82.5 135 100 100
B, S, SK M10 70 140 40 7.6 20.1 105 365 150 150
B, S, SK M12 80 160 70 12.3 24.5 120 405 200 200
B, S, SK M16 100 200 115 17.1 34.3 150 495 250 250
1) Load specifications take into account the partial safety factors indicated in the approval of the resistors as well as a partial safety value of the effect
yF=1.4. Unreinforced or normally reinforced concrete with a rebar spacing of s ≥ 10 cm with a diameter of ds ≤ 10 mm is assumed for the indicated values.
2) Transverse load specifications refer to an anchor without an edge. For transverse loads close to the edge ( c < 10 hef or < 60 d, proof is to be provided of the con-
crete edge failure according to ETAG 001, annex C, calculation procedure A.
3) If the characteristic axial spacing sccr,N is not reached, a calculation according to ETAG 001, annex C calculation procedure A is to be carried out. For further speci-
fications, see approval ETA-06/0108.
4) T he characteristic edge spacing ccr,N is a measurement value for the static proof. The minimum edge spacing C min is crucial for the constructive design and must
not be below the value specified.

Fischer heavy-duty anchor TAM

non-cracked concrete M 6 to M 12, approval no. ETA-04/0003 for galvanically zinc-
plated steel.
Application: The Fischer TA M heavy-duty anchors are used to fasten medium-
weight to heavy objects in concrete. Main application areas include metal structures
of all kinds, fastening supports and machine feet to the floor.
Properties: By tightening the screw or hexagon nut, the cone is pulled into the
expansion sleeve and braces against the borehole wall.
galvanized DG 2030
Item no. Type Thread Hole Ø Total length Min. depth Price per Package
of drilled 100 pieces contents
holes
626598 TAM 8 M8 12 mm 56 mm 70 mm • 50
6265910 TAM 10 M 10 15 mm 69 mm 90 mm • 25
6265912 TAM 12 M 12 18 mm 86 mm 105 mm • 25
i Loads for TAM heavy-duty anchor

Permissible loads1)3) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25)
Type effective minimum instal- per per necessary edge necessary min. axial min.
anchoring com- lation missible missible s
pacing (at an edge) for axial spacing spacing edge spacing
depth ponent torque tensile trans- max. load. for max. load
load
hef hmin Tinst Nperm2) Vperm2) c load scr smin cmin
[mm]
TA M6 40 100 10 3.6 3.3 50 55 120 80 505)
TA M8 45 100 20 5.7 6.7 65 95 135 90 60
TA M10 55 110 40 9.5 11.0 160 150 220 110 70
TA M12 70 140 75 11.9 17.0 170 200 210 160 120
with a lever arm (bending) as well as for reduced edge and axial spacing.
3) For TA M and TA M-S, for screw strength class 8.8.
5) No reduction of tensile load
Fischer internal thread expansion anchor FWB
Application: For non approval-related installations in concrete. Main areas of appli-

cation include fasteners that need to be detached again, such as fastening diamond
drill and sawing machines.
Properties: Made of galvanically zinc-plated steel. Completely detachable. Can be
used multiple times.
Advantage:
- reduced material costs thanks to multiple uses
galvanized DG 2070
Item no. Thread Dowel length Hole Ø in Price per Package
c
oncrete 100 pieces contents
6204212 M 12 75 mm 20 mm • 50
1 2 3 4
Fischer hammerset anchor EA II
Approved by the building authorities: European Technical Approval, Option 7, non-

European Technical Approval for redundant (multi) fasteners M 6 to M 12 approval
no. ETA-07/0142 for galvanically zinc-plated steel and stainless steel A4.
Application: The Fischer EA II hammerset anchors are used to fasten light to heavy
objects in concrete. Main application areas are metal structures of all kinds, sus-
pending pipes, ventilation ducts, sprinkler systems in sanitary, heating and ventilation
engineering as well as fastening suspended ceilings.
Properties: Low setting depths. Easy, repeated loosening and refastening of fixtures
is possible. The EA II internally threaded anchor has a molded edge that prevents
sliding deeper into holes that were drilled too deep. Optical setting control using an
impression during insertion with the EAW setting tool.
Installation instructions: Hammerset anchors are deformation-controlled.
Nevertheless, a torque wrench is required for tightening the screws or lock nuts.
Advantages:
- shaped edge prevents sliding deeper
Note: When using the Fischer EAW - H Plus setting tool, the proof loads common
with many hammerset anchors are eliminated.
galvanized DG 2066
Item no. Thread Dowel Minimum Hole Ø Screw-in Price per Package
length anchoring depth 100 pieces contents
depth min./max.
62747630 M6 30 mm 30 mm 8 mm 6/13 mm • 100
62747830 M8 30 mm 30 mm 10 mm 8/13 mm • 100
62747840 M8 40* mm 40 mm 10 mm 8/13 mm • 50
627471030 M 10 30** mm 30 mm 12 mm 10/13 mm • 50
627471040 M 10 40 mm 40 mm 12 mm 10/17 mm • 50
627471250 M 12 50 mm 50 mm 15 mm 12/22 mm • 25
627471665 M 16 65 mm 65 mm 20 mm 16/28 mm • 20
627472080 M 20 80 mm 80 mm 25 mm 20/34 mm • 10
*) extra long, **) extra short

length anchoring depth 100 pieces contents
depth min./max.
62749630 M6 30 mm 30 mm 8 mm 6/13 mm • 100
62749830 M8 30 mm 30 mm 10 mm 8/13 mm • 100
62749840 M8 40 mm 40 mm 10 mm 8/13 mm • 50
627491040 M 10 40 mm 40 mm 12 mm 10/17 mm • 50
6274912501 M 12 50 mm 50 mm 15 mm 12/22 mm • 25
627491665 M 16 65 mm 65 mm 20 mm 16/28 mm • 20
627492080 M 20 80 mm 80 mm 25 mm 20/34 mm • 10
1 2 3 4 5

Fischer hammerset anchor EA II M 12 D
Approved by the building authorities: European Technical Approval, non-cracked

concrete, M12, approval no.ETA-07/0135 for galvanically zinc-plated steel.
Type: The Fischer EA II-D hammerset anchors are used to fasten diamond drills and
diamond saws.
Properties: Low setting depths. Easy, repeated loosening and refastening of fixtures
is possible. The EA II internally threaded anchor has a molded edge that prevents
sliding deeper into holes that were drilled too deep. Optical setting control using an
impression during insertion with the EAW setting tool.
Installation instructions: Hammerset anchors are deformation-controlled.
Nevertheless, a torque wrench is required for tightening the screws or lock nuts.
Advantages:
- shaped edge prevents sliding deeper
Note: Diamond drill and saw machine attachments frequently move at the top of the
load of common hammerset anchors. The thick-walled design provides more security
and prevents the anchor sleeve from breaking when the machines are started. When
using the Fischer EAW - H Plus setting tool, the proof loads common with many
hammerset anchors are eliminated.
galvanized DG 2063
length anchoring in concrete depth 100 pieces contents
depth min. / max.
627491250 M 12 50 mm 50 mm 16 mm 12/22 mm • 100
Fischer setting tool EAW H plus for hammerset anchor EA II
Application: For setting the Fischer EA II and EA II-D hammerset anchors

Properties: Simple setting control. During insertion, the setting tool leaves a clearly
visible impression on the edge of the dowel.
DG 2071
Item no. For hammerset Price per piece Package
anchor EA II contents
62748630 M 6 x 30 • 1
62748830 M 8 x 30 • 1
62748840 M 8 x 40 • 1
627481030 M 10 x 30 • 1
627481040 M 10 x 40 • 1
627481250 M 12 x 50 • 1
627481665 M 16 x 65 • 1
627482080 M 20 x 80 • 1
1 2 3 4 5
i Loads for hammerset anchor EA II galvanically zinc-plated / stainless steel A4
Permissible loads1)3) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/25 4) (~B25) the load is simultaneously
reduced
Type Material effective mini- max. per per necessary edge spacing necessary axial min. axial min. edge
anchoring mum installation missible missible (at an edge) for max. load. spacing for spacing spacing 7)
depth com- torque tensile transverse max. load
ponent load load
thick-
ness
hef hmin max. Tinst Nperm2) Vperm2) c c scr8) smin cmin
[mm] [mm] [Nm] [kN] [kN] [mm] [mm] [mm] [mm] [mm]
EA II M6 5) gzp 3.9 115
30 100 4 3.95 115 90 65 115 6)
A4 3.2 115
EA II M8 5) gzp 4.9 140
30 100 8 3.95 140 95 95 6)
140 6)
A4 5.6 140
EA II gzp 4.9 140
40 100 8 6.1 140 120 95 140 6)
M8 x 40 A4 5.6 140
EA II gzp 6.2 140
30 120 15 3.95 140 90 85 140 6)
M10 x 30 5) A4 6.9 140
EA II M10 gzp 6.2 160
40 120 15 6.1 160 120 95 160 6)
A4 7.1 160
EA II M12 gzp 11.3 200
50 120 35 8.5 200 150 145 200 6)
A4 12.9 200
EA II M12 D gzp 50 120 35 8.5 15.4 200 200 150 145 200 6)
EA II M16 gzp 18.3 240
65 160 60 12.6 240 195 180 240 6)
A4 21.1 240
EA II M20 gzp 29.1 285
80 200 120 17.2 280 240 190 280 9)
A4 33.7 340
2) A detailed dowel measurement, e.g. with the dimensioning software Compufix, is required for combinations of tensile and transverse loads or for transverse
loads with a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups).
4) The concrete is assumed to be normally reinforced.
5) The use is limited to statically indeterminate components.
6) No reduction of the load.
7) This edge spacing also corresponds to the edge spacing for the maximum tensile load, therefore no reduction of the load.
8) No simultaneously acting influence of concrete edges
9) No reduction of tensile load
i Loads for hammerset anchor EA II galvanically zinc-plated / stainless steel A4

Permissible loads1) 3) of a single dowel for multi-fasteners4) in cracked normal concrete (concrete tensile zone) of strength C20/25 (~B25)
Type Material effective minimum max. permissible load necessary axial necessary
anchoring depth component Installation spacing for max. edge spacing for
thickness torque load max. load
hef hmin max. Tinst Fperm2) s=smin c=cmin
[mm] [mm] [Nm] [kN] [mm] [mm]
EA II M6 gzp
30 80 4 1.2 200 150
A4
EA II M8 gzp
30 80 8 2.0 200 150
A4
EA II gzp
40 80 8 2.0 200 150
M8 x 40 A4
EA II gzp
30 80 15 2.0 200 150
M10 x 30 A4
EA II M10 gzp
40 80 15 3.0 250 200
A4
EA II M12 gzp
50 100 35 4.3 300 300
A4
2) Valid for tensile load, transverse load and diagonal pull at any angle. For greater component thicknesses, for transverse loads with a lever arm (bending) as well as
for reduced edge and axial spacing (dowel groups), see approval.
4) A multi-fastener according to ETAG 001 part 6 is defined by at least 3 fixing points with at least one dowel each and a permissible load per fixing point of 1.4 kN or
by at least 4 fixing points with at least one dowel each and a permissible load per fixing point of 2.1 kN.

MKT hammerset anchor E

non-cracked concrete, M 6 to M 20, approval no. ETA-02/0020 for stainless steel A4
as well as M 6 to M 10 for stainless steel HCR 1.4529.
European Technical Approval for redundant (multi) fasteners M 6 to M 16 approval
no. ETA-05/0116 for stainless steel A4 and HCR.
Application: The MKT E hammerset anchors are used to fasten light to heavy ob-
jects in concrete. Main application areas are metal structures of all kinds, suspending
pipes, ventilation ducts, sprinkler systems in sanitary, heating and ventilation engi-
neering as well as fastening suspended ceilings.
Properties: Low setting depths. Easy, repeated loosening and refastening of fixtures Europäische Technische Zulassung -
Option 7
ETA - 05/0116
is possible.
Installation instructions: Hammerset anchors are deformation-controlled. Neverthe-
less, torque is required for tightening the screws or lock nuts so as not to damage the
dowel.
Note: Use setting tool type E-SW for installation.

Item no. Thread Dowel Hole Ø Min. depth Screw-in Price per Package
length of drilled depth 100 pieces contents
holes
621076 M6 30 mm 8 mm 30 mm 7 - 13 mm • 100
621078 M8 30 mm 10 mm 30 mm 9 - 13 mm • 100
6210710 M 10 40 mm 12 mm 40 mm 11 - 15 mm • 50
6210712 M 12 50 mm 15 mm 50 mm 13 - 18 mm • 50
6210716 M 16 65 mm 20 mm 65 mm 18 - 23 mm • 25
1 2 3 4 5
i Loads for MKT hammerset anchor E stainless steel A4

Permissible loads of a single dowel1) 4) in non-cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) the load is simultaneously
reduced
Type Material effective mini- max. per per necessary edge spacing (at necessary axial min. axial min. edge
anchoring mum installation missible missible an edge) for max. load spacing for spacing spacing
ponent load load
thick-
ness
hef hmin max. Tinst Nperm2) Vperm2) Tensile load Transverse scr smin cmin
[mm] c
[mm]
E M6x30 A4 30 100 4 3.9 3.2 80 80 90 50 80
E M8x30 A4 30 100 8 3.9 4.9 95 95 90 60 95
E M10x40 A4 40 130 15 6.1 6.1 135 135 120 100 135
E M12x50 A4 50 140 35 8.5 11.5 165 165 150 120 165
E M16x65 A4 65 160 60 12.6 19.2 200 215 195 150 200
4) Requirements for the screw or threaded rod and nut, see ETA-02/0020
Setting tool for MKT hammerset anchor E-SW
Application: For setting hammerset anchor E.
DG 2075
Item no. For dowels Price per piece Package contents
621066 M6 • 1
621068 M8 • 1
6210610 M 10 • 1
6210612 M 12 • 1
6210616 M 16 • 1
6210620 M 20 • 1
MKT hollow ceiling dowel EASY
Approved by the building authorities: Approval no. Z - 21.1 - 1785 M 6 - M 12

for prestressed concrete slabs > B55 (C45/55).
Type: For anchorings in prestressed concrete slabs. When the dowel is expanded
a form fit is created in the cavity of the ceiling.
galvanized DG 2078
Item no. Thread Hole Ø Sleeve length Mirror Price per Package
t hickness 100 pieces contents
627408 M8 12 mm 35 mm 25 - 50* mm • 50
6274010 M 10 16 mm 40 mm 25 - 50* mm • 50
M 6 + M 12 can be delivered at short notice
*different loads
1 2 3 4

Brass expansion dowel
Application: For light, non approval-related fasteners in concrete or in other

homogeneous and pressure-resistant building materials.
Properties: Made of brass with internal thread for metric screws of all types.
Advantage:
- low anchoring depths
Note: Lightly expand the dowel before installation by screwing in a screw.
DG 2118
Item no. Thread Overall length Hole Ø Price per Package
100 pieces contents
621005 M5 20 mm 6 - 6.5 mm • 100
621006 M6 23 mm 8 mm • 100
621008 M8 30 mm 11 mm • 100
6210010 M 10 34 mm 13 mm • 100
6210012 M 12 40 mm 16 mm • 50
6210016 M 16 44 mm 22 mm • 25
Fischer FPX-I aerated concrete anchor
Approved by the building authorities: European Technical Approval for aerated

concrete in compressive strength class 2 to 7 N/mm², aerated concrete wall and
ceiling panels in compressive strength class 3.3 to 4.4 N/mm² and paneled aerated
concrete masonry, e.g. plastered, tiled, wallpapered, etc. M 6 - M 12 ETA-12/0456.
Application: The Fischer FPX-I aerated concrete anchors are used for the safety-
related attachment of objects in aerated concrete. Ideal for a number of applications
in dry interior spaces such as fixing suspended ceilings, cable lines, pipes, ventilation
ducts, railings and handrails.
Properties: The Fischer FPX-I aerated concrete anchor makes automatic and 100%
setting control possible. The enclosed hexagonal pin is automatically released from
the anchor once optimum expansion has been achieved. With the 4x expansion of
the anchor, the aerated concrete is sealed at the four wings, thus creating an under-
cut.
Installation instructions: Every pack includes a hexagonal wrench for expanding
the anchor. Insertion in high-strength aerated concrete is also possible by doing
pre-drilling. Cleaning the borehole is not necessary.
Advantages:
- no borehole cleaning necessary
- higher installation comfort thanks to simple deformation-controlled expanding by
means of a battery-powered screwdriver or ratchet (no tightening torque required)
- very high installation safety thanks to automatic setting control
- high tensile and transverse loads thanks to unique 4x expansion
- permits safety-related fasteners in aerated concrete as the only steel anchor
Note: Galvanically zinc-plated screws in minimum strength class 4.8 are to be used.
The fasteners are not included in the price of the Fischer aerated concrete anchors.
DG 2060
Item no. Type Hole Ø Drilled Dowel Screw-in Price per Package
hole depth length depth 100 pieces contents
for pre- min. / max.
positioned
assembly
6205166 FPX M 6-I 10 mm 95 mm 75 mm 10 / 15 mm • 25
6205168 FPX M 8-I 10 mm 95 mm 75 mm 8 / 15 mm • 25
62051610 FPX M 10-I 10 mm 95 mm 75 mm 10 / 15 mm • 25
62051612 FPX M 12-I 10 mm 95 mm 75 mm 12 / 15 mm • 25
1 2 3 4 5
i Loads for FPX-I aerated concrete anchor
Permissible loads and required component dimensions in aerated concrete masonry
Type FPX-I M6, M8, M10, M12

Permissible loads 1) per dowel
Anchoring depth [mm] 70
P 1.6 / pm ≥ 0.25kg /d m³ [kN] 0.32
P 2.0 / pm ≥ 0.35kg / dm³ [kN] 0.43
P 4.0 / pm ≥ 0.50kg / dm³ [kN] 0.89
P 6.0 / pm ≥ 0.65kg / dm³ [kN] 1.43
Component dimensions
Minimum component thickness hmin [mm] 100
Single dowel
Minimum clearance between the single dowels a [mm] 375
Minimum edge spacing single dowel c1 [mm] 125
Minimum distance to non-mortared joints cF4) [mm] 752) / 125
Minimum corner spacing c1 / c2 [mm] 125 / 190
Dowel group 3)
Effect Transverse + diagonal pull only central pull
Minimum axial spacing smin [mm] 100 100
Minimum edge spacing c1 [mm] 250 125
Minimum clearance for dowel groups a [mm] 750 375
Minimum corner spacing c1 / c2 [mm] 250 / 374 125 / 190
1) The necessary partial safety factors of the resistors and a partial safety factor yF=1.4 are taken into consideration
2) For non-mortared butt joint widths ≤ 2 mm and central tensile loads as well as transverse forces parallel to the joint
3) The following applies to dowel groups from 2 or 4 dowels: permF,group = 2 * permF,single dowel a C2 ≥ 1.5 x c1
4) For hidden joints, permF is to be halved
Aerated concrete masonry c1 c1
smin
smin
cF
hmin
i Loads for FPX-I aerated concrete anchor

Necessary component dimensions in aerated concrete slabs (wall and ceiling slabs, tensile or pressure zone)
Slab joints are to be taken into consideration as edges. For hidden joints, permF is to be halved1)
Type FPX-I M6, M8, M10, M12

Permissible loads 2) per dowel
Anchoring depth [mm] 70
PB 3.3 / pm≥0.50kg/dm³, tensile zone of the aerated concrete slab [kN] 0.62
PB 4.4 / pm≥0.55kg/dm³, tensile zone of the aerated concrete slab [kN] 0.83
PB 3.3 / pm≥0.50kg/dm³, pressure zone of the aerated concrete slab [kN] 0.83
PB 4.4 / pm≥0.55kg/dm³, pressure zone of the aerated concrete slab [kN] 1.24
Component dimensions
Single dowel
Minimum clearance between the single dowels a [mm] 600
Minimum edge spacing single dowel c1 [mm] 125 / 1503)
Minimum corner spacing c1 / c2 [mm] 125 / 190
Dowel group 4)
Effect Transverse + diagonal pull only central pull
Minimum axial spacing smin [mm] 100 100
Minimum edge spacing c1 [mm] 250 125 / 1503)
Minimum clearance for dowel groups a [mm] 750 600
Minimum corner spacing c1 / c2 [mm] 250 / 375 125 / 190
1) For known slab width and partial view of joints (e.g. roof surfaces), we consider a calibration of the joints to be permissible and equivalent to the visibility of joints
2) The necessary partial safety factors of the resistors and a partial safety factor yF=1.4 are taken into consideration
3) For reinforced slabs with a width ≤ 700 mm
4) The following applies to dowel groups from 2 or 4 dowels: permF,group = 2 * permF,single dowel
c1
Wall and ceiling slabs
a
C2 ≥ 1.5 x c1
c1
a smin
smin
c1
a

Multi-Monti screw anchor, hexagon head

cracked concrete 7.5 -10 - 12 - 14 and 16 mm approval no. ETA-05/0010 for galvani-
cally zinc-plated steel.
European Technical Approval, Option 1, cracked concrete 7.5 - 10 and 12 mm
approval no. ETA-05/0011 for stainless steel A4.
Building Standards Approval, approval no. Z-21.1-1503 (galvanized) and Z-21.1-
1697 (stainless steel A4), 6 - 7.5 and 10 mm for anchoring light ceiling coverings and
suspended ceilings in concrete.
Application: The Multi Monti screw anchors are used to fasten light to heavy objects
in concrete. Suitable for non approval-related fasteners in many other materials such
as brick, natural stone, solid brick and sand-lime brick. Main application areas in-
clude fasteners in all areas of housing technology, interior design, but also temporary
fasteners such as shuttering props or core drills.
Properties: Multi-Monti screw anchors are based on a completely new operating
principle. The threaded flanks undercut the concrete, giving rise to positive locking
anchoring. Free of expansion pressure, resulting in small axial and edge spacing.
No curing times, can be loaded immediately. Completely detachable. Short instal-
lation times, very economical, especially the comparably very inexpensive stainless
steel design.
Push-through installation possible. Reusable for non approval-related, temporary
installations such as shuttering props or core drills.
Advantages:
- no tightening torque required
- reusable with non approval-related anchorings
- setting and installation in one work step
Note: Clean borehole thoroughly.
The dimensions 7.5 x 45, 7.5 x 50, 10 x 60, 12 x 60 and 16 x 80 are not included in
the ETA approval, but are (except for 12 x 60 and 12 x 80) covered by the Building
Standards Approval Z-21.1-1503 or Z-21.1-1697.
Widths across flats Ø 7.5 mm = WAF 13, Ø 10 mm = WAF 16, Ø 12 mm = WAF 18,
Ø 14 mm = WAF 21 mm, Ø 16 mm = WAF 24 mm.
Screw drive for countersunk and round head screws Ø 5 mm = TX 20,
Ø 6 mm = TX 30, Ø 7.5 mm = TX 40.
galvanized DG 2050
Item no. Type Ø x length Hole Ø Anchoring Clamping Price per Package
depth range 100 pieces contents
625317545 MMS-S 7.5/45* 7.5 x 45 mm 6 mm 45 mm 1 mm • 100
625317550 MMS-S 7.5/50* 7.5 x 50 mm 6 mm 45 mm 5 mm • 100
625317560 MMS-S 7.5/60 7.5 x 60 mm 6 mm 45/55 mm 15/5 mm • 100
625317580 MMS-S 7.5/80 7.5 x 80 mm 6 mm 45/55 mm 35/25 mm • 100
6253175100 MMS-S 7.5/100 7.5 x 100 mm 6 mm 45/55 mm 55/45 mm • 100
6253175120 MMS-S 7.5/120 7.5 x 120 mm 6 mm 45/55 mm 75/65 mm • 50
6253175140 MMS-S 7.5/140 7.5 x 140 mm 6 mm 45/55 mm 95/85 mm • 50
625311060 MMS-S 10x60* 10 x 60 mm 8 mm 55 mm 5 mm • 50
625311070 MMS-S 10x70/5 10 x 70 mm 8 mm 65 mm 5 mm • 40
625311080 MMS-S 10x80/15 10 x 80 mm 8 mm 65 mm 15 mm • 40
6253110100 MMS-S 10x100/35 10 x 100 mm 8 mm 65 mm 35 mm • 25
6253110120 MMS-S 10x120/55 10 x 120 mm 8 mm 65 mm 55 mm • 25
6253110140 MMS-S 10x140/75 10 x 140 mm 8 mm 65 mm 75 mm • 25
6253110160 MMS-S 10x160/95 10 x 160 mm 8 mm 65 mm 95 mm • 25
625311260 MMS-S 12x60* 12 x 60 mm 10 mm 55 mm 5 mm • 25
625311280 MMS-S 12x80/5 12 x 80 mm 10 mm 75 mm 5 mm • 25
6253112100 MMS-S 12x100/25 12 x 100 mm 10 mm 75 mm 25 mm • 25
6253112120 MMS-S 12x120/45 12 x 120 mm 10 mm 75 mm 45 mm • 25
6253112140 MMS-S 12x140/65 12 x 140 mm 10 mm 75 mm 65 mm • 25
6253112160 MMS-S 12x160/85 12 x 160 mm 10 mm 75 mm 85 mm • 25
625311680 MMS-S 16x80 16 x 80 mm 14 mm 70 mm 10 mm • 25
6253116130 MMS-S 16x130/15 16 x 130 mm 14 mm 115 mm 15 mm • 10
Continuation of Multi-Monti screw anchor, hexagon head

Item no. Type Ø x length Hole Ø Anchoring Clamping Price per Package
depth range 100 pieces contents
625407550 MMS-S 7.5 x 50/65 7.5 x 50/65 mm 6 mm 55 mm 10 mm • 50
625407560 MMS-S 7.5 x 75/10 7.5 x 75/10 mm 6 mm 65 mm 10 mm • 50
625401070 MMS-S 10.0 x 85/10 10 x 85/10 mm 8 mm 75 mm 10 mm • 25
625401080 MMS-S 10.0 x 95/20 10 x 95/20 mm 8 mm 75 mm 20 mm • 25
625401280 MMS-S 12.0 x 100/10 12 x 100/10 mm 10 mm 90 mm 10 mm • 25
6254012100 MMS-S 12.0 x 120/30 12 x 120/30 mm 10 mm 90 mm 30 mm • 25
Multi-Monti screw anchor, countersunk head

cally zinc-plated steel. European Technical Approval, Option 1, cracked concrete
7.5 - 10 and 12 mm approval no. ETA-05/0011 for stainless steel A4. Building Stan-
dards Approval, approval no. Z-21.1-1503 (galvanized) and Z-21.1-1697 (stainless
steel A4), 6 - 7.5 and 10 mm for anchoring light ceiling coverings and suspended
ceilings in concrete.
anchoring. Free of expansion pressure, resulting in small axial and edge spacing. No
curing times, can be loaded immediately. Completely detachable. Short installation
times, very economical, especially the comparably very inexpensive stainless steel
design. Push-through installation possible.
Advantages:
The dimension 6 x 40 is not part of the approval. The dimensions 6 x 50 and
7.5 x 50 correspond to the Building Standards Approval Z-21.1-1503. All other
dimensions comply with the approval ETA-05/0010 or ETA-05/0011.
Widths across flats Ø 7.5 mm = WAF 13, Ø 10 mm = WAF 16, Ø 12 mm = WAF 18,
Ø 14 mm = WAF 21 mm, Ø 16 mm = WAF 24 mm. Screw drive for countersunk and
round head screws Ø 5 mm = TX 20, Ø 6 mm = TX 30, Ø 7.5 mm = TX 40.
galvanized DG 2050
Item no. Type Dimension Borehole Anchoring Clamping Price Package
Ø depth range per 100 contents
pieces
625346040 HMS-F 6/40 6 x 40 mm 5 mm 30 mm 10 mm • 200
625346050 MMS-F 6/50 6 x 50 mm 5 mm 45 mm 5 mm • 100
625327550 MMS-F 7.5/50 7.5 x 50 mm 6 mm 45 mm 5 mm • 100
625327560 MMS-F 7.5/60 7.5 x 60 mm 6 mm 45/55 mm 15/5 mm • 100
625327580 MMS-F 7.5/80 7.5 x 80 mm 6 mm 45/55 mm 35/25 mm • 100
6253275160 MMS-F 7.5/160 7.5 x 160 mm 6 mm 45/55 mm 115/105 mm • 50

Continuation of Multi-Monti screw anchor, countersunk head

pieces
625417560 MMS-F 7.5 x 7.5 x 75/10 6 mm 65 mm 10 mm • 50
75/10 mm
Multi-Monti screw anchor, round head

cally zinc-plated steel. European Technical Approval, Option 1, cracked concrete
7.5 - 10 and 12 mm approval no. ETA-05/0011 for stainless steel A4.
Building Standards Approval, approval no. Z-21.1-1503 (galvanized) and Z-21.1-1697
(stainless steel A4), 6 - 7.5 and 10 mm for anchoring light ceiling coverings and sus-
pended ceilings in concrete.
No curing times, can be loaded immediately. Completely detachable. Short instal-
lation times, very economical, especially the comparably very inexpensive stainless
steel design. Push-through installation possible.
Advantages:
The dimensions 5 x 30, 5 x 50 and 6 x 30 are not part of the approval.
galvanized DG 2050
pieces
625335030 HMS-P 5/30* 5 x 30 mm 4 mm 30 mm 1 mm • 200
625335050 HMS-P 5/50* 5 x 50 mm 4 mm 35 mm 15 mm • 200
625336030 HMS-P 6/30* 6 x 30 mm 5 mm 30 mm 1 mm • 200
625337550 MMS-P 7.5/50 7.5 x 50 mm 6 mm 45 mm 5 mm • 100
Multi-Monti threshold anchors, hexagon head and washer

Option 1, cracked concrete 12 mm, approval no. ETA-05/0010 for galvanically
zinc-plated steel.
Application: For fastening thick wooden beams such as purlins.
No curing times, can be loaded immediately. Completely detachable. Short installa-
tion times, very economical. Push-through installation possible.
Advantages:
Note: Clean borehole thoroughly. Width across flats Ø 12 mm = WAF 18.
galvanized DG 2050
Item no. Type Hole Ø in Anchoring Clamping Price per Package
concrete depth range 100 pieces contents
6253112180 MMS-S 12 x 180/105 10 mm 75 mm 105 mm • 25
6253112200 MMS-S 12 x 200/125 10 mm 75 mm 125 mm • 25
6253112240 MMS-S 12 x 240/165 10 mm 75 mm 165 mm • 25
6253112280 MMS-S 12 x 280/205 10 mm 75 mm 205 mm • 25
6253112320 MMS-S 12 x 320/245 10 mm 75 mm 245 mm • 25
Multi-Monti TC screw anchor
Approved by the building authorities: Building Standards Approval, cracked con-

crete 7.5 to 12 mm, approval no. Z-21.1-1879 for galvanically zinc-plated steel.
Application: The Multi-Monti TC screw anchors are used to fasten wooden beams
or thresholds in concrete. Main application areas include fastening rafters in
wooden construction.
Properties: Multi-Monti is based on a completely new operating principle. The
threaded flanks undercut the concrete, giving rise to positive locking anchoring.
Free of expansion pressure, resulting in small axial and edge spacing. No curing
times, can be loaded immediately. Completely detachable. Short installation times
because Multi Monti are set and installed in one work step. The TC screw anchor
is countersunk in the wood. One screw length is therefore enough for many wood
thicknesses.
Advantages: Installation sequence:
- the proof of the TC is done via DIN 1052, resulting in significantly higher
transverse loads because the bending can be ignored
Note: Clean borehole thoroughly. T setting tools are stipulated for setting the
Multi-Monti TC screw anchors.
1 2 3 4
1. drilling 2. cleaning 3. and 4. screwing in
galvanized DG 2050
Item no. Type Ø x length Thickness of Price per Package
the fixture 100 pieces contents
min/max
6284175100 MMS-TC 7.5 x 100 7.5 x 100 mm 40/150 mm • 50
6284110130 MMS-TC 10 x 130 10 x 130 mm 60/200 mm • 25
6284112160 MMS-TC 12 x 160 12 x 160 mm 80/300 mm • 25

Setting tool for Multi Monti TC screw anchor
Application: T setting tools for setting the Multi-Monti TC screw anchors.

Properties: There is a scale on the shaft for the required screw-in depth. The thick-
ness of the fixture on the setting tool can be adjusted using a rubber ring, which
guarantees the optimum screw-in depth.
Item no. Type suitable for Price per Package

piece contents
6284275 T 30 x 138 MMC-TC 7.5 x 100 • 1
6284210 T 30 x 138 MMC-TC 10 x 130 • 1
6284212 T 50 x 260 MMS-TC 12 x 160 • 1
Fischer nail anchor FNA II with pan head
Approved by the building authorities: European Technical Approval, for (redundant)

multi-fasteners in cracked concrete, galvanically zinc-plated steel, stainless steel A4
and HCR 1.4529, approval number ETA-06/0175.
Application: The Fischer FNA II nail anchors are used to fasten suspended ceilings
with loop wires, punch mounting strips or slotted steel straps, chains, etc.
The longer designs are used to span non-structural plaster layers or insulations
as well as for directly fastening battens or metal profiles in concrete.
Properties: Simple, very speedy installation by driving in with a hammer. No screw-
ing required. Small bore diameter and low anchoring depths reduce installation times.
Optical setting control - expanding nail is driven in flush when installed correctly.
Europäische Technische Zulassung -
Option 7
ETA - 06/0175
galvanized DG 2065
Item no. Type Hole Ø x drill Minimum Clamping Price per Package
depth, for anchoring range 100 pieces contents
push-through depth
fittings
621035 FNA II 6/30/5 6 x 45 mm 30 mm 5 mm • 100
6210330 FNA II 6/30/30 6 x 70 mm 30 mm 30 mm • 50
6210350 FNA II 6/30/50 6 x 90 mm 30 mm 50 mm • 50
6210370 FNA II 6/30/75 6 x 115 mm 30 mm 75 mm • 50

Item no. TypeHole Ø x drill Minimum Clamping Price per Package
depth, for anchoring range 100 pieces contents
push-through depth
fittings
62101730 FNA II 6/30/5 A4 6 x 45 mm 30 mm 5 mm • 50
6210430 FNA II 6/30/30 A4 6 x 70 mm 30 mm 30 mm • 50
1 2 3
Fischer nail anchor FNA II with bolt and nut

Application: The Fischer FNA II nail anchors with external thread and flange nut
can be used like the types with pan heads, but are often also used to fasten cable
clamps.
Properties: Simple, very speedy installation by driving in with a hammer. No screw-
ing required. Small bore diameter and low anchoring depths reduce installation times.
Optical setting control - expanding nail is driven in flush when installed correctly. Europäische Technische Zulassung -
Option 7
ETA - 06/0175
galvanized DG 2065
Item no. Type Connection Hole Ø x drill Minimum Price per Package
thread depth, min. anchoring 100 pieces contents
depth
62101630 FNA II 6/30M6/5 M6 6 x 45 mm 30 mm • 100

Item no. Type Connection Hole Ø x drill Minimum Price per Package
thread depth, min. anchoring 100 pieces contents
depth
621045 FNA II 6/30M6/5 M6 6 x 45 mm 30 mm • 100
1 2 3 4
Fischer FNA II Nail Anchor with hook/eyelet

Application: The Fischer FNA II nail anchors are used to fasten suspended
ceilings with loop wires, punch mounting strips or slotted steel straps, chains, etc.
The longer designs are used to span non-structural plaster layers or insulation.
Properties: The special operating principle makes simple impact installation
possible. With optimized expansion clip that already ensures a hold once it is
inserted into the borehole and prevents falling out for overhead installation.
FNA II OE (eyelet) and H (hook) nail anchors are suitable for pre-positioned
installation. Europäische Technische Zulassung -
Advantages:
Option 7
ETA - 06/0175
- short processing time thanks to simple impact installation

- simple installation thanks to extremely low anchoring depth
-o ptimum adjustment to the respective application by means of different
head shapes
DG 2065
Item no. Type Type Hole Ø x drill depth Minimum Price Package
for pre-positioned anchoring per 100 contents
assembly depth pieces
62101825 FNA II 6/25 H with hook 6 x 35 mm 25 mm • 50
621018251 FNA II 6/25 OE with eyelet 6 x 35 mm 25 mm • 50

i L
oads for FNA II nail anchor galv. zinc-plated / stainless steel A4 /
Permissible loads1) of a single dowel for multi-fasteners4) in cracked normal concrete (concrete tensile zone) of strength minimum spacing while the
C20/25 (~B25) - C50/603) (~B55) load is simultaneously reduced
Type Material effective minimum max. installa- permissible necessary necessary axial min. axial min. edge
anchoring component tion torque load edge spacing spacing for spacing spacing
depth thickness for max. load
max. load
hef hmin Tinst Nperm2)4) c s smin cmin
[mm] [mm] [Nm] [kN] [mm] [mm] [mm] [mm]
FNA II 6 100 for c ≥
gzp 25 80 - 1.4 100 for s ≥ 200 100 50
x 25 200
FNA II 6 gzp
x 30 A4 30 80 - 2.4 100 for s ≥ 200 100 for c ≥ 200 100 50
C
FNA 6 x 25
gzp 25 80 4 1.4 100 for s ≥ 200 100 for c ≥ 200 100 50
M6
FNA 6 x 30 gzp
M6 A4 30 80 4 2.4 100 for s ≥ 200 100 for c ≥ 200 100 50
C
FNA II 6 x
gzp 30 80 4 2.4 100 for s ≥ 200 100 for c ≥ 200 100 50
30 M8
FNA II 6 x
gzp 25 80 - 0.7 100 for s ≥ 200 100 for c ≥ 200 100 50
25 OE
2) Valid for tensile load, transverse load and diagonal pull at any angle. For transverse loads with a lever arm (bending) as well as for reduced edge and axial spacing
(dowel groups), see approval.
3) See approval for concrete strength C 12/15.
4) A multi-fastener according to ETAG 001 part 6 is defined by at least 3 fixing points with at least one dowel each and a permissible load per fixing point of 1.4 kN or
by at least 4 fixing points with at least one dowel each and a permissible load per fixing point of 2.1 kN.
MKT N-K nail anchor with pan head

Application: The MKT N nail anchors are used to fasten suspended ceilings with
vernier hangers, loop wires, punch mounting strips or slotted steel straps, chains,
etc. The longer designs are used to span non-structural plaster layers or insulations
as well as for directly fastening battens or metal profiles in concrete.
Properties: When loaded the installed MKT N nail anchor expands on its own.
The cone is pulled into the expansion clip and braces against the borehole wall.
Advantages:
- quick and simple installation: Insertion is sufficient
- reduced installation times: thanks to small bore diameters and low anchoring
depths
- optical setting control: Expanding nail is driven in flush when installed correctly
galvanized DG 2065
Item no. Type Hole Ø Min. Minimum Clamping Price Package
depth of anchoring range, per 100 contents
drilled depth max. pieces
holes
6289465 NK 6-5-10/44 6 mm 35 mm 31 mm 10 mm • 200
62894630 NK 6-30-35/69 6 mm 35 mm 31 mm 35 mm • 200
62894650 NK 6-50-55/89 6 mm 35 mm 31 mm 55 mm • 100
1 2 3 4
MKT Nail Anchor N-M

Application: The MKT N nail anchor is mainly used to fasten suspended ceilings and
other building components with threaded rods, loop wires, punch mounting strips
or slotted steel straps, chains, etc. The longer design is used to span non-structural
plaster layers or insulation.
Properties: When loaded the installed MKT N nail anchor expands on its own. The
cone is pulled into the expansion clip and braces against the borehole wall. N-M nail
anchors with M 8 and M 10 graded thread. Thanks to the graded thread, both M 8
and M 10 threaded rods can be processed with a dowel.
Advantages:
- only one dowel for M 8 and M 10 threaded rods for nail anchor N-M with graded
thread
- quick and simple installation: Insertion is sufficient
- reduced installation times: thanks to small bore diameters and low anchoring
depths
DG 2065
Item no. Type Hole Ø Min. Minimum Clamping range Price Package
depth of anchoring per 100 contents
drilled depth pieces
holes
62896625 N-M 6-25 M8/10 6 mm 35 mm 25 mm Variable with • 100
threaded rods
M8/M10
62896630 N-M 6-30 M8/10 6 mm 40 mm 30 mm Variable with • 100
threaded rods
M8/M10
i Loads for MKT N / N-K / N-M nail anchors galv. zinc-plated / stainless steel A4 HCR
Permissible loads1) of a fastening point4) for multi-fasteners in cracked and non-cracked concrete of strength C20/25 3) (~B25)
Type Material effective minimum max. Optimized for maximum load Optimized for minimum edge spacing
anchoring component installation permissible necessary necessary permissible necessary necessary
depth thickness torque max. load edge spacing axial distance max. load edge spacing axial distance
for max. load to the next for max. load to the next
fastening fastening
point for max. point for
load max. load
hef hmin Tinst Fperm2) c s Fperm2) c s
[mm] [mm] [Nm] [kN] [mm] [mm] [kN] [mm] [mm]
N
gzp 25 80 4 2.14 100 200 0.95 50 100
hef 25 mm
N-K / N-M
gzp 25 80 - 2.145) 100 200 0.95 50 100
hef 25 mm
N gzp
hef 30 mm A4 30 80 4 2.81 100 200 1.19 50 100
HCR
N-K / N-M gzp
hef 30 mm A4 30 80 - 2.815) 100 200 1.19 50 100
HCR
2) Valid for tensile load, transverse load and diagonal pull at any angle. See approval for transverse loads with a lever arm (bending). The maximum permissible load
per fastening point can, depending on national regulations, be below the permissible load of the dowel. The permissible loads per fastening point are governed
for the respective countries in ETAG 001, part 6.
3) See approval for concrete strength C 12/15.
4) A fastening point can be:
• single dowel
• pair of dowels with axial spacing s > 50 mm or
• group of four with s > 50 mm
If the axial spacing of the dowel in a fastening point is greater or the same as the corresponding axial distance between the fastening points, the characteristic
resistors for each individual dowel apply.
5) For the design N-M, proof must be provided for a transverse load with a lever arm if a transverse force is present

Toge ceiling dowel TD-N

multi-fasteners in cracked concrete, approval no. ETA-06/0259, galvanically zinc-
plated steel.
Application: The Toge TD-N ceiling dowels are used to fasten suspended ceil-
ings with vernier hangers, loop wires, punch mounting strips or slotted steel straps,
chains, etc. The longer design is for spanning non-structural plaster layers or directly
fastening battens in concrete.
Properties: Simple, very speedy installation by driving in with a hammer. Small bore
diameter and low anchoring depths reduce installation times. No screwing required.
Optical setting control, expanding nail is driven in flush when installed correctly.
Note: Do not accidentally hit the expansion wedge when driving in the ceiling dowel
because it will cause the dowel to expand prematurely.
galvanized DG 2063
Item no. Type Hole Ø x drill Anchoring Clamping Price per Package
depth, min. depth range 100 pieces contents
624221 TD-N 6/35 6 x 40 mm 32 mm 4.5 mm • 100
62422665 TD-N 6/65 6 x 40 mm 32 mm 35 mm • 100
i Loads for ceiling nail TD-N 6 galv. zinc-plated

Permissible loads1) of a single dowel for multi-fasteners3) non-structural systems in cracked normal concrete (concrete tensile zone) of
strength C20/25 (~B25)
Type effective anchoring depth minimum permissible load necessary edge spacing necessary axial spacing
component thickness for permissible load for permissible load
hef hmin Fperm2) ccr, N scr, N
[mm] [mm] [kN] [mm] [mm]
TDN 6 32 80 2.4 150 200
2) V
alid for tensile loads, transverse loads and diagonal pull at any angle. See approval for transverse loads with a lever arm (bending).
3) A
multi-fastener according to ETAG 001 part 6 is defined by at least 3 fixing points with at least one dowel each and a permissible load per fixing point of 1.4 kN
or by at least 4 fixing points with at least one dowel each and a permissible load per fixing point of 2.1 kN.
FAKKT injection system type VMU 345 and 300

non-cracked concrete M8 to M30, approval no. ETA-06/0120 for galvanically
zinc-plated steel, stainless steel A4 and HCR 1.4529.
Approval Z-21.3-1804, masonry, solid and perforated masonry M 8 - M12
(with FAKKT internally threaded anchor rods also in M6 + M8 ) for galvanically
zinc-plated steel and stainless steel A4.
Application: The FAKKT VMU injection system is suitable for fastening medium-
weight to heavy objects in masonry, solid and perforated brick, lime sand, solid
and perforated masonry as well as in non-cracked concrete. Main application areas
include metal structures, facade substructures and fasteners in all areas of housing
technology. The two resin and hardener components are first mixed when they leave
the cartridge. In this way, the remaining content of the cartridge continues to func-
tion. It is only necessary to screw on a new mixing tube after long interruptions.
Properties: Styrene-free vinyl ester resin mortar comprising the two components
resin and hardener. The FAKKT injection mortar is available in 2 different cartridge
systems.
Shuttle cartridge VMU 345: For these cartridges, the hardener is attached in a
separate tube on the outside. A gun with 2 plunger item no. 620354 is required.
Every cartridge comes with 1 mixing tubes.
Coaxial cartridge VMU 300: This cartridge contains 2 separated hose bags with
62678345
62680300
mortar and hardener. A powerful customary silicone application gun, e.g. item
no. 620355, suffices for dispensing. Every cartridge comes with 1 mixing tubes.
Installation instructions: The boreholes are to be cleaned thoroughly with a blower
and cleaning brush. Installation only permitted with torque wrench.
Advantages: VMU 345 VMU 300
- fastening without expansion pressure permits short distances
- also approved for the use of customary threaded rods with factory test 3.1
Note: The FAKKT injection mortar is only permitted in conjunction with VMU and V-A
anchor rods, threaded rods with factory test 3.1 and for use in perforated masonry
with VMU-SH sieve sleeves. Offset VMU-AH anchor rods are only approved for use
in VMU-SH sieve sleeves in perforated masonry. The anchor rods and sieve sleeves
Option 7
ETA - 06/0120
are not included in the price of the FAKKT injection mortar. For proper and compliant
installation, cleaning tools, special application guns, mixing tubes and, depending on
the substrate, sieve sleeves are necessary.
DG 2136
Item no. Type Contents Price per piece Package
contents
62678345 Shuttle cartridge VMU 345 345 ml • 1
62680300 Coaxial cartridge VMU 300 300 ml • 1
Item accessories
Item no. Description Price
620354 MKT application gun •
1 2 3 4 5 6
Application in perforated bricks
1 2 3 4 5 6
Application in solid masonry

FAKKT injection mortar VMU Set

cracked concrete M8 to M30, approval no. ETA-06/0120 for galvanically zinc-plated
Approval Z-21.3-1804, masonry, solid and perforated masonry M 8 - M12 (with
FAKKT internally threaded anchor rods also in M6 + M8 ) for galvanically zinc-plated
Application: The FAKKT VMU injection mortar is suitable for fastening medium-
technology.
Properties: Practical stacking boxes optionally with 20 cartridges or 12 cartridges
and an application gun (VM-P standard). Each cartridge comes with 2 mixing tubes.
Advantages:
-a lso approved for the use of customary threaded rods with factory test 3.1
the substrate, sieve sleeves are necessary. Europäische Technische Zulassung -
Option 7
ETA - 06/0120
DG 2132
c
ontents
626781 Shuttle cartridge VMU 345 20 Cartridges • 1
626801 Coaxial cartridge VMU 300 20 Cartridges • 1
628912 Shuttle cartridge VMU 345 20 Cartridges + 1 gun • 1
626783 Shuttle cartridge VMU 345 12 Cartridges + 1 gun • 1
626803 Coaxial cartridge VMU 300 12 Cartridges + 1 gun • 1
Mixing tube for FAKKT injection mortar VMU 300 + 345 ml
Application: Suitable for FAKKT VMU injection system and MKT VMZ injection
mortar system. The mixing tube serves as a nozzle for the injection mortar cartridges.
The mixing tube must be replaced in the event of long work interruptions.
Item no. Price per piece Package contents

620374 • 1
Material requirement per cartridge 300 / 345 ml Temperature in the Process- Curing time in
in solid brick without sieve sleeve borehole ing time a dry substrate
M8 M 10 M 12 M 16 -5 °C 90 min 330 min
approx. boreholes 50 / 58 35 / 41 24 / 28 15 / 17 -4 °C to -1 °C 45 min 330 min
0 °C to +4 °C 20 min 180 min
Material requirement per cartridge 300 / 345 ml
in perforated brick with sieve sleeve +5 °C to +9 °C 12 min 120 min
M8 M 10 M 12 +10 °C to +19 °C 6 min 80 min
approx. boreholes 17 / 20 12 / 14 12 / 14 +20 °C to +29 °C 4 min 45 min
+30 °C to +34 °C 2 min 25 min
+35 °C to 39 °C 1.4 min 20 min
+40 °C 1.4 min 15 min
The mortar requires twice as much time for complete curing in
damp substrates.
FAKKT injection mortar VMU 420 XL fix

Approval Z-21.3-1804, masonry, solid and perforated masonry M 8 - M 12 (with
FAKKT internally threaded anchor rods also in M 6 + M 8) for galvanically zinc-plated
technology.
Properties: The FAKKT VMU 420 XL cartridges, with 420 ml, have significantly more
content than comparable mortars. For easier application, the mixing tube, in contrast
with customary mixers, only has 6 spirals through which the tough mortar has to be
pressed. For further properties, see FAKKT VMU 300/345.
Advantages:
- less replacement of cartridges thanks to more content
- tangibly faster and less tiring application
- optimum price-performance ratio
- also approved for the use of customary threaded rods with factory test 3.1.
the substrate, sieve sleeves are necessary. Every cartridge comes with one mixing tube.
Option 7
ETA - 06/0120
DG 2136
c
ontents
62678420 VMU 420 XL fix Coaxial cartridge 420 ml • 1
1 2 3 4 5 6
Application in perforated bricks
1 2 3 4 5 6
Application in solid masonry

FAKKT injection mortar VMU 420 XL fix Set

Approval Z-21.3-1804, masonry, solid and perforated masonry M 8 - M 12 (with
FAKKT internally threaded anchor rods also in M 6 + M 8) for galvanically zinc-plated
technology.
Properties: Practical stacking boxes with 8 cartridges and an application gun
(VM-P standard). Each cartridge comes with 2 mixing tubes.
Installation instructions: The boreholes are to be cleaned thoroughly with
a blower and cleaning brush. Installation only permitted with torque wrench.
Scope of supply: 8 cartridges, 1 gun type standard and 16 mixing tubes.
Advantages:
- less replacement of cartridges thanks to more content
- tangibly faster and less tiring application
- optimum price-performance ratio

Option 7
ETA - 06/0120
DG 2132
Item no. Type Price per piece Package
contents
62678420 VMU 420 XL fix Set • 1
Mixing tube for FAKKT injection mortar VMU 420 XL fix
Application: The mixing tube serves as a nozzle for the injection mortar. The mixing
tube must be replaced in the event of long work interruptions.
620378 • 1
Material requirement per cartridge 420 ml Temperature in the Process- Curing time in a dry
in solid brick without sieve sleeve borehole ing time substrate
M8 M 10 M 12 M 16 -5 °C 90 min 330 min
approx. boreholes 69 49 33 20 -4 °C to -1 °C 45 min 330 min
0 °C to +4 °C 20 min 180 min
Material requirement per cartridge 420 ml
in perforated brick without sieve sleeve +5 °C to +9 °C 12 min 120 min
M8 M 10 M 12 +10 °C to +19 °C 6 min 80 min
approx. boreholes 24 17 17 +20 °C to +29 °C 4 min 45 min
+30 °C to +34 °C 2 min 25 min
+35 °C to 39 °C 1.4 min 20 min
+40 °C 1.4 min 15 min
The mortar requires twice as much time for complete curing in
damp substrates.
i Loads for FAKKT injection system
FAKKT injection system in masonry (Z-21.3-1804) VMU-A VMU-AH VMU-IG / VMU-IGH

M8 M 10 M 12 M 12 M6 M8
Effective anchoring depth hef [mm] 80 90 93 93 93 93
Permissible loads for pull, transverse pull and diagonal pull at any angle
Solid bricks Mz12 [kN] 1.7
Solid sand-lime brick KS 12 [kN] 1.7
Hollow brick HLz 4 / 6 / 12 [kN] 0.6 / 0.8 / 1.0 *)
Porous sand-lime brick KSL 4 / 6 / 12 [kN] 0.6 / 0.8 / 1.4 *) **)
Hollow lightweight concrete brick Hbl 2 / 4 [kN] 0.5 / 0.8 *)
Hollow concrete blocks Hbn 4 [kN] 0.8 *)
Permissible bending moment Mperm
Steel, galvanically zinc-plated (5.8) [Nm] 11.0 21.0 37.0 37.0 4.4 11.0
Component dimensions and installation parameters
Axial spacing (dowel group) 1) a >= [mm] 100 (200)2)
Minimum axial spacing min a [mm] 503)
Minimum intermediate distance (single dowel) az [mm] 250
Edge spacing ar >= [mm] 200 (250)4)
Edge spacing under special conditions ar [mm] 50 (60)4)
Through hole in the component to be connected df ≤ [mm] 9 12 14 14 7 9
Torque during anchoring Tinst [Nm] 85)
Cleaning brush diameter db [mm] 18
Boreholes per cartridge 300/345 ml with [Piece] 17/20 12/14 - 12/14 12/14 12/14
sieve sleeve
Boreholes per cartridge 300/345 ml without [Piece] 50/58 35/41 26/31 - 35/41 26/31
sieve sleeve
*)
The values apply to the rotary drilling method. In the percussion drilling method, the values are to be reduced in compliance with the approval.
**)
external supports >= 30 mm
1)
The spacing may fall below the axial spacing a for dowel pairs and groups of four up to the minimum distance if the permissible loads are reduced.
This does not apply to hollow brick and hollow block masonry.
The maximum loads per individual block may not be exceeded.
2)
The value in parentheses applies to hollow brick and hollow block masonry.
3)
min a does not apply to hollow brick and hollow block masonry.
4)
The value in parentheses applies to use in solid brick.
5)
2 Nm for a non-adjacent anchoring plate on the anchoring base.
FAKKT injection system in concrete (ETA-06/0120) M 81) M 10 M 12 M 16 M 201) M 241) M 301)
Effective anchoring depth hef [mm] 80 90 110 125 170 210 270
Permissible central tensile load of a single dowel without edge influence Nperm , i.e. edge spacing c ≥ 1.5hef and axial spacing s ≥ 3hef
Non-cracked concrete C 20/25 [kN] 7.6 11.9 16.7 23.8 45.2 54.8 81.0
Permissible transverse force of a single dowel without edge influence Vperm , i.e. edge spacing c ≥ 10hef and axial spacing s ≥ 3hef
Steel, galvanically zinc-plated (5.8) [kN] 5.1 8.6 12.0 22.3 34.9 50.3 80.0
Permissible bending moment Mperm
Steel, galvanically zinc-plated (8.8) [kN] 17.1 34.3 60.0 152.0 296.6 513.1 1.028.0
Component dimensions and installation parameters
Characteristic axial spacing scr,N [mm] 160 180 220 250 340 420 540
Characteristic edge spacing ccr,N [mm] 80 90 110 125 170 210 270
Minimum axial spacing smin [mm] 40 45 55 65 85 105 135
Minimum edge spacing cmin [mm] 40 45 55 65 85 105 135
Minimum component thickness hmin [mm] 100 130 160 200 220 280 350
Reduced minimum component thickness hmin,red [mm] - 120 140 160 - - -
Through hole in the component to be con- df ≤ [mm] 9 12 14 18 22 26 33
nected
Torque during anchoring Tinst [Nm] 10 20 40 60 120 150 300

Anchor rod for FAKKT VMU external thread injection system
Application: In conjunction with the FAKKT and MKT VMU injection mortar, the
VMU-A anchor rods are suited for fastening medium-weight to heavy objects in
masonry, solid and perforated masonry, sand-lime solid and perforated bricks and
in non-cracked concrete. Main application areas include metal structures, facade
substructures and fasteners in all areas of housing technology.
Properties: Anchoring without expansion pressure in concrete, solid and perforated
bricks results in conjunction with FAKKT VMU injection mortar for small axial and
edge spacing.
Advantages:
galvanized DG 2147
Item no. Type Dimension Clamping Application Price per Package
range note 100 pieces contents
62695810 VMU-A 8-10/100 M 8/100 mm 10 mm 1 • 10
62695820 VMU-A 8-20/110 M 8/110 mm 20 mm 1 • 10
62695840 VMU-A 8-40/130 M 8/130 mm 40 mm 1 • 10
626951010 VMU-A 10-10/110 M 10/110 mm 10 mm 1 • 10
626951030 VMU-A 10-30/130 M 10/130 mm 30 mm 1 • 10
626951050 VMU-A 10-50/150 M 10/150 mm 50 mm 1 • 10
626951065 VMU-A 10-65/165 M 10/165 mm 65 mm 1 • 10
626951090 VMU-A 10-90/190 M 10/190 mm 90 mm 1 • 10
6269510160 VMU-A 10-160/260 M 10/260 mm 160 mm 1 • 10
626951215 VMU-A 12-15/120 M 12/120 mm 15 mm 2 • 10
626951225 VMU-A 12-25/130 M 12/130 mm 25 mm 2 • 10
626951250 VMU-A 12-50/155 M 12/155 mm 50 mm 2 • 10
626951280 VMU-A 12-80/185 M 12/185 mm 80 mm 2 • 10
6269512120 VMU-A 12-120/225 M 12/225 mm 120 mm 2 • 10
6269512160 VMU-A 12-160/265 M 12/265 mm 160 mm 2 • 10
627021210 VMU-A 12-10/135 M 12/135 mm 10 mm 3 • 10
627021230 VMU-A 12-30/155 M 12/155 mm 30 mm 3 • 10
627021250 VMU-A 12-50/175 M 12/175 mm 50 mm 3 • 10
627021285 VMU-A 12-85/210 M 12/210 mm 85 mm 3 • 10
6270212125 VMU-A 12-125/250 M 12/250 mm 125 mm 3 • 10
6270212175 VMU-A 12-175/300 M 12/300 mm 175 mm 3 • 10
626961215 VMU-AH 12-15/120 M 12/120 mm 15 mm 4 • 10
626961225 VMU-AH 12-25/130 M 12/130 mm 25 mm 4 • 10
626961250 VMU-AH 12-50/155 M 12/155 mm 50 mm 4 • 10
626951615 VMU-A 16-15/160 M 16/160 mm 15 mm 5 • 10
626951630 VMU-A 16-30/175 M 16/175 mm 30 mm 5 • 10
626951660 VMU-A 16-60/205 M 16/205 mm 60 mm 5 • 10
626951690 VMU-A 16-90/235 M 16/235 mm 90 mm 5 • 10
6269516155 VMU-A 16-155/300 M 16/300 mm 155 mm 5 • 10
1) According to approval, these anchor rods are for non-cracked concrete and solid masonry without sieve sleeves as well as for perforated masonry with
sieve sleeves.
2) According to approval, these anchor rods are for solid masonry without sieve sleeves.
3) According to approval, these anchor rods are for non-cracked concrete without sieve sleeves.
4) These anchor rods have offset shafts and are for perforated masonry with sieve sleeves according to approval.
5) According to approval, these anchor rods are for non-cracked concrete.
Continuation of anchor rod for FAKKT VMU external thread injection system

Item no. Type Dimension Clamping Application Price per. Package
range note 100 pieces contents
62697810 VMU-A 8-10/100 M 8/100 mm 10 mm 1 • 10
62697820 VMU-A 8-20/110 M 8/110 mm 20 mm 1 • 10
62697840 VMU-A 8-40/130 M 8/130 mm 40 mm 1 • 10
626971010 VMU-A 10-10/110 M 10/110 mm 10 mm 1 • 10
626971030 VMU-A 10-30/130 M 10/130 mm 30 mm 1 • 10
626971050 VMU-A 10-50/150 M 10/150 mm 50 mm 1 • 10
626971065 VMU-A 10-65/165 M 10/165 mm 65 mm 1 • 10
626971090 VMU-A 10-90/190 M 10/190 mm 90 mm 1 • 10
6269710160 VMU-A 10-160/260 M 10/260 mm 160 mm 1 • 10
626971215 VMU-A 12-15/120 M 12/120 mm 15 mm 2 • 10
626971225 VMU-A 12-25/130 M 12/130 mm 25 mm 2 • 10
626971250 VMU-A 12-50/155 M 12/155 mm 50 mm 2 • 10
627031210 VMU-A 12-10/135 M 12/135 mm 10 mm 3 • 10
627031230 VMU-A 12-30/155 M 12/155 mm 30 mm 3 • 10
627031250 VMU-A 12-50/175 M 12/175 mm 50 mm 3 • 10
627031285 VMU-A 12-85/210 M 12/210 mm 85 mm 3 • 10
6270312125 VMU-A 12-125/250 M 12/250 mm 125 mm 3 • 10
6270312175 VMU-A 12-175/300 M 12/300 mm 175 mm 3 • 10
626981215 VMU-AH 12-15/120 M 12/120 mm 15 mm 4 • 10
626981225 VMU-AH 12-25/130 M 12/130 mm 25 mm 4 • 10
626981250 VMU-AH 12-50/155 M 12/155 mm 50 mm 4 • 10
626971615 VMU-A 16-15/160 M 16/160 mm 15 mm 5 • 10
626971630 VMU-A 16-30/175 M 16/175 mm 30 mm 5 • 10
626971660 VMU-A 16-60/205 M 16/205 mm 60 mm 5 • 10
626971690 VMU-A 16-90/235 M 16/235 mm 90 mm 5 • 10
6269716155 VMU-A 16-155/300 M 16/300 mm 155 mm 5 • 10
1) According to approval, these anchor rods are for non-cracked concrete and solid masonry without sieve sleeves as well as for perforated masonry with
sieve sleeves.
2) According to approval, these anchor rods are for solid masonry without sieve sleeves.
3) According to approval, these anchor rods are for non-cracked concrete without sieve sleeves.
4) These anchor rods have offset shafts and are for perforated masonry with sieve sleeves according to approval.
5) According to approval, these anchor rods are for non-cracked concrete.

Anchor rods for Fakkt VMU external thread injection system
Fakkt VMU anchor rods zinc-plated and stainless steel for use in non-cracked concrete, solid and perforated brick masonry.
Type Borehole Ø x depth in Borehole Ø x depth in Borehole Ø x depth Sieve sleeves
concrete without sieve sleeves solid brick masonry without in perforated brick with
mm sieve sleeves sieve sleeves
mm mm
VMU-A 8-10/100 10 x 80 10 x 85 14 x 105 VMU-SH 14 x 100
VMU-A 8-20/110 10 x 80 10 x 85 14 x 105 VMU-SH 14 x 100
VMU-A 8-40/130 10 x 80 10 x 85 14 x 105 VMU-SH 14 x 100
VMU-A 10-10/110 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 10-30/130 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 10-50/150 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 10-65/165 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 10-90/190 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 10-160/260 12 x 90 12 x 95 16 x 105 VMU-SH 16 x 100
VMU-A 12-15/120 14 x 98
VMU-A 12-25/130 14 x 98
VMU-A 12-50/155 14 x 98
VMU-A 12-80/185 14 x 98
VMU-A 12-120/225 14 x 98
VMU-A 12-160/265 14 x 98
VMU-A 12-10/135 14 x 110
VMU-A 12-30/155 14 x 110
VMU-A 12-50/175 14 x 110
VMU-A 12-85/210 14 x 110
VMU-A 12-125/250 14 x 110
VMU-A 12-175/300 14 x 110
VMU-AH 12-15/120 16 x 105 VMU-SH 16 x 100
VMU-AH 12-25/130 16 x 105 VMU-SH 16 x 100
VMU-AH 12-50/155 16 x 105 VMU-SH 16 x 100
VMU-A 16-15/160 18 x 125
VMU-A 16-30/175 18 x 125
VMU-A 16-60/205 18 x 125
VMU-A 16-90/235 18 x 125
VMU-A 16-155/300 18 x 125
Anchor rod for FAKKT VMU internal thread injection system
Application: In conjunction with the FAKKT and MKT VMU injection mortar, the
VMU-A anchor rods are suited for fastening medium-weight to heavy objects in
masonry, solid and perforated masonry, sand-lime solid and perforated bricks and
in non-cracked concrete. Main application areas include metal structures, facade
substructures and fasteners in all areas of housing technology.
bricks results in conjunction with FAKKT VMU injection mortar for small axial and
edge spacing.
Advantages:
galvanized DG 2167
Item no. Type Inter- Outside Ø Screw-in Borehole Ø Borehole Ø Sieve sleeves Price Pack-
nal x length depth x depth in x depth in per 100 age
thread min./ concrete perforated pieces con-
max. and solid masonry tents
masonry with sieve
without sleeves
sieve
sleeve
626996 VMU-IG M 6 M 6 10 x 93 mm 8/20 mm 12 x 98 mm - - • 10
627006 VMU-IGH M 6 M 6 12 x 93 mm 8/20 mm - 16 x 105 VMU-SH 16 x 100 • 10
mm
mm
Stainless
steel A4 DG 2167
Item no. Type Inter- Outside Ø Screw-in Borehole Ø Borehole Ø Sieve sleeves Price Pack-
nal x length depth x depth in x depth in per 100 age
thread min./ concrete perforated pieces con-
max. and solid masonry tents
masonry with sieve
without sleeves
sieve
sleeve
mm
mm
Internally threaded sleeves are not included in the approval for non-cracked concrete.

VMU-SH sieve sleeve
Approved by the building authorities: Approved in conjunction with FAKKT

and MKT VMU injection mortar, VMU-A and VMU-AH anchor rods for use in perfo-
rated brick.
Application: The MKT VM-SH sieve sleeves are used when FAKKT and MKT VMU
injection mortar is used in perforated brick.
Properties: MKT VMU-SH sieve sleeves prevent the mortar from moving into the
chambers of the perforated masonry.
Installation instructions: The sieve sleeve is filled from the anchor base. The mixing
tube is slowly pulled out of the anchor sleeve during dispensing. Please refer to the
information for the FAKKT VMU injection mortar for the filling quantity.
DG 2173
Item no. Type Borehole Ø x for anchor rods Price per Package
depth 100 pieces contents
6270414 VMU-SH 14 x 100 14 x 105 mm M8 • 10
6270416 VMU-SH 16 x 100 16 x 105 mm M 10 - M 12 IG M6 - • 10
IG M8
Sieve sleeve type VM-SH, plastic
Application: The MKT VM-SH sieve sleeves are used when FAKKT and MKT VMU
injection mortar is used in perforated brick. They are not included in the approval.
Properties: The VM-SH sieve sleeves prevent the mortar from moving into the cham-
bers of the perforated masonry.
Installation instructions: The sieve sleeve is filled from the anchor base. The m
ixing
tube is slowly pulled out of the anchor sleeve during dispensing. Please refer to
the information for the FAKKT VMU injection mortar for the filling quantity. When
using M12 anchor rods, the insert, which is to prevent mortar from flowing out, must
be removed.
DG 2174
Item no. Type Borehole Ø x for anchor rods Price per Package
depth 100 pieces c
ontents
620361250 VM-SH 12x50 13 x 55 mm M6-M8 • 10
620361685 VM-SH 16x85 16 x 95 mm M 8 - M 10 • 10
6203616130 VM-SH 16x130 16 x 140 mm M 8 - M 10 • 10
620362085 VM-SH 20x85 20 x 95 mm M 12 • 10
Application guns for FAKKT injection mortar VMU
Type: For applying FAKKT injection mortar VMU 420 XL fix.
Application gun
Pro Application gun
Standard
Item no. Type Price per piece Package contents

6203524 Standard • 1
6203525 Pro • 1
Fischer injection mortar system Highbond FHB II-P
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete
M 8 - M 24, approval no. ETA-05/0164. For galvanically zinc-plated steel, stainless steel A4 and
HCR 1.4529.
Application: The Fischer FHB Highbond injection mortar system is used to fasten
heavy objects in cracked concrete. Main areas of application include metal
structures, facade substructures, railings, noise barriers, machines and much more.
Properties: The Fischer FHB II Highbond mortar system is based on styrene-free vinyl ester resin. It
is a strong and form-fitting composite that is fit for cracks. Small axial and edge spacing. Installation
in the push-through procedure is possible using annular gap backfilling. Optional use with injection
cartridge. Highbond from the cartridge is also permitted in moist boreholes and FHB II cartridges
are even permitted in water-filled boreholes and under water. No borehole cleaning and no resulting
deeper boring and sealing of bore dust necessary. This reduces the installation time to up to 40%
and therefore saves working time and costs. This only applies to the cartridges FHB II-P and
FHB II-PF. The conventional borehole cleaning remains in place for FHB II 345 S and FHB II 150 C
mortar from the cartridge.
The two resin and hardener components are first mixed when they leave the cartridge. In this way,
the remaining content of the cartridge continues to function. It is only necessary to screw on a new
mixing tube after long interruptions (only for cartridges, not mortar cartridges).
Advantages:
- no borehole cleaning necessary, resulting in enormous time savings during installation
- low concrete component thicknesses
- high load-carrying capacity in cracked concrete
- variable applications thanks to cartridges and glass cartridges
Note: The Fischer Highbond injection mortar and cartridges are only permitted in conjunction
with Fischer FHB II anchor rods. The anchor rods are not included in the price of the Fischer mortar
cartridges.
Option 7
ETA - 05/0164
Standard length DG 2133

Item no. Type for FHB anchors Hole Ø Drilled hole Price per Package
depth/ 100 pieces contents
anchoring
626741060 FHB II - P 10 x 60 FHB II - AS M 10 x 60 10 mm 75 / 60 mm • 10
626741075 FHB II - P 10 x 75 FHB II AS M 10 x 75 10 mm 90 / 75 mm • 10

Option 7
ETA - 05/0164
extended design DG 2133

depth/ 100 contents
anchoring pieces
62675860 FHB II - P 8 x 60 FHB II - AL M 8 x 60 10 mm 75 / 60 mm • 10
2 3 4 5

Fischer injection mortar system Highbond FHB II-PF quick version
Approved by the building authorities: European Technical Approval, Option 1, cracked concrete M 8 -
M 24, approval no. ETA-05/0164. For galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529.
Application: The rapid curing cartridges are recommended in particular at low
temperatures, for overhead installations or for under water applications.
Please take note of the processing times at higher temperatures.
Properties: The Fischer FHB II Highbond mortar system is based on styrene-free vinyl ester resin.
It is a strong and form-fitting composite that is fit for cracks. Small axial and edge spacing. Installation in
the push-through procedure is possible using annular gap backfilling. Optional use with injection cartridge.
Highbond from the cartridge is also permitted in moist boreholes and FHB II cartridges are even permitted in
water-filled boreholes and under water. No borehole cleaning and no resulting deeper boring and sealing of
bore dust necessary. This reduces the installation time to up to 40% and therefore saves working time and
costs. This only applies to the cartridges FHB II-P and FHB II-PF. The conventional borehole cleaning remains
in place for FHB II 345 S and FHB II 150 C mortar from the cartridge.
The two resin and hardener components are first mixed when they leave the cartridge. In this way, the
remaining content of the cartridge continues to function. It is only necessary to screw on a new mixing tube
after long interruptions (only for cartridges, not mortar cartridges).
Advantages:
- extremely rapid curing times
- significantly reduced installation times
- cost savings thanks to shorter wait times
- no borehole cleaning necessary, resulting in enormous time savings during installation
Note: The Fischer Highbond injection mortar and cartridges are only permitted in conjunction with Fischer
FHB II anchor rods. The anchor rods are not included in the price of the Fischer mortar cartridges. Europäische Technische Zulassung -
Option 7
ETA - 05/0164
Standard length DG 2133

anchoring
627451060 FHB II - PF 10 x 60 FHB II - AS M 10 x 60 10 mm 75 / 60 mm • 10

Option 7
ETA - 05/0164
extended design DG 2133

anchoring
62746860 FHB II - PF 8 x 60 FHB II - AL M 8 x 60 10 mm 75 / 60 mm • 10
6274612120 FHB II - PF 12 x 120 FHB II - AL M 10 x 120 14 mm 135 /120 mm • 10
1 2 3 4 5
Temperature in the Curing times

borehole
FHB II-PF quick version FHB II - P FIS-HB 945 S
0 °C 6 min. 45 min. 180 min.
> +21 °C 2 min. 10 min. 35 min.
Fischer Highbond FIS-HB 345 S composite mortar

cracked concrete M 8 - M 24, approval no. ETA-05/0164. For galvanically zinc-plated
heavy objects in cracked concrete. Main areas of application include metal struc-
tures, facade substructures, railings, noise barriers, machines and much more.
Properties: The Fischer FHB II Highbond mortar system is based on styrene-free
vinyl ester resin. It is a strong and form-fitting composite that is fit for cracks. Small
axial and edge spacing. Installation in the push-through procedure is possible using
annular gap backfilling. Optional use with injection cartridge. Highbond from the car-
tridge is also permitted in moist boreholes and FHB II cartridges are even permitted
in water-filled boreholes and under water.
and brush. Installation only permitted with torque wrench. With external hardener.
A gun with double rods is required for application.
The two resin and hardener components are first mixed when they leave the car-
tridge. In this way, the remaining content of the cartridge continues to function.
It is only necessary to screw on a new mixing tube after long interruptions (only for
cartridges, not mortar cartridges).
Advantages:
- extremely rapid curing thanks to FHB II-PF cartridge
Note: The Fischer Highbond injection mortar and cartridges are only permitted in
conjunction with Fischer FHB II anchor rods. The anchor rods are not included in the
price of the Fischer mortar cartridges. Every cartridge comes with 2 mixing tubes.
For proper and compliant installation, cleaning tools, special application guns and
mixing tubes are necessary.
Option 7
ETA - 05/0164
DG 2134
Item no. Cartridge contents Price per piece Package contents
62635345 345 ml • 1
1 2 3 4
5 6 7 8
9 10 11 12

borehole
0 °C 6 min. 45 min. 180 min.
> +21 °C 2 min. 10 min. 35 min.

Fischer Highbond FIS-HB 150 C composite mortar

cracked concrete M 8 - M 24, approval no. ETA-05/0164. For galvanically zinc-plated
and brush. Installation only permitted with torque wrench. With internal hardener.
A customary, powerful silicone application gun is sufficient for dispensing.
Advantages:
Note: The Fischer Highbond injection mortar and cartridges are only permitted in
conjunction with Fischer FHB II anchor rods. The anchor rods are not included in the
price of the Fischer mortar cartridges. Every cartridge comes with 2 mixing tubes.
Option 7
ETA - 05/0164
DG 2134
Item no. Contents Price per piece Package contents
62635150 150 ml • 1
1 2 3 4
5 6 7 8
9 10 11 12

borehole
0 °C 6 min. 45 min. 180 min.
> +21 °C 2 min. 10 min. 35 min.
Fischer Highbond FHB II anchor rod
Approved by the building authorities: Approved in conjunction with the Fischer

FHB II injection system for fastening in cracked concrete.
Application: The Fischer FHB II Highbond injection mortar system is used to fasten
and brush. Installation only permitted with torque wrench.
Advantages:
Note: The Fischer Highbond anchor rods and cartridges are only permitted in con-
junction with Fischer FIS FHB injection mortar and FHB II cartridges. The mortar and
the cartridges are not included in the price of the Fischer anchor rods.
galvanized DG 2142
Item no. Type Thread Ø Hole Ø Clamping Drilled hole Filling Price per Package
range depth/ quantity, 100 pieces contents
anchoring scale
divisions**
626701010 FHB II - AS 10 x 60/10 M 10 10 mm 10 mm 75 / 60 mm 3 • 10
**) The HB 345 S cartridge has 180 scale marks on it.

Continuation of Fischer Highbond FHB II anchor rod

Item no. Type Thread Ø Hole Ø Clamping Drilled hole Filling Price Pack-
range depth/ quantity, per 100 age
anchoring scale pieces con-
divi- tents
sions**
626781010 FHB II - AS 10 x 60/10 A4 M 10 10 mm 10 mm 75 / 60 mm 3 • 10
**) The HB 345 S cartridge has 180 scale marks on it.
Fischer Highbond FHB II anchor rod AL - long
Approved by the building authorities: Approved in conjunction with the Fischer

FHB II injection system for fastening in cracked concrete.
Application: The Fischer FHB II Highbond injection mortar system is used to fasten
Advantages:
Note: The Fischer Highbond anchor rods and cartridges are only permitted in con-
junction with Fischer FIS FHB injection mortar and FHB II cartridges. The mortar and
the cartridges are not included in the price of the Fischer anchor rods.
galvanized DG 2142
Item no. Type Thread Ø Hole Ø Clamping Drilled hole Filling Price per Pack-
range depth/ quantity, 100 pieces age
anchoring scale con-
divisions* tents
62679810 FHB II - AL 8 x 60/10 M8 10 mm 10 mm 75 / 60 mm 3 • 10
626791010 FHB II - AL 10 x 95/10 M 10 12 mm 10 mm 110 / 95 mm 5 • 10
*) The HB 345 S cartridge has 180 scale marks on it.

Continuation of Fischer Highbond FHB II anchor rod AL - long

Item no. Type Thread Ø Hole Ø Clamp- Drilled hole Filling Price per Pack-
ing depth/ quan- 100 pieces age
range anchoring tity, con-
scale tents
divi-
sions*
62673810 FHB II - AL 8 x 60/10 A4 M8 10 mm 10 mm 75 / 60 mm 3 • 10
626731010 FHB II - AL 10 x 95/10 A4 M 10 12 mm 10 mm 110 / 95 mm 5 • 10
*) The HB 345 S cartridge has 180 scale marks on it.
i Loads for Highbond System FHB II
Permissible loads1)5) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/25 3) (~B25) the load is simultaneously
reduced
Type Material effective mini- installation per per necessary edge spacing necessary axial min. axial min. edge
anchoring mum torque missible missible (at an edge) for max. load. spacing for spacing spacing 7)
depth com- tensile transverse max. load
ponent load load
thick-
ness
[mm]
FHB II-A L gzp 7.8 165
60 100 15 8.0 4)
90 180 40 40
M8 x 60 A4 / C 8.7 185
FHB II-A S gzp 11.3 245
60 100 15 8.0 4)
90 180 40 40
M10 x 60 A4 / C 13.8 310
75 120 15 11.1 113 225 40 40
M10 x 75 A4 / C 13.8 270
95 140 20 15.9 143 285 40 40
M10 x 95 A4 / C 13.3 225
75 120 30 11.1 113 225 40 40
M12 x 75 A4 / C 19.3 385
100 140 40 17.1 150 300 50 50
M12 x 100 A4 / C 19.3 335
120 170 40 22.5 180 360 50 50
M12 x 120 A4 / C 19.3 295
95 150 50 15.9 143 285 50 50
M16 x 95 A4 / C 31.7 560
125 170 60 24.0 188 375 55 55
M16 x125 A4 / C 35.8 570
145 190 60 29.9 218 435 60 60
M16 x145 A4 / C 35.8 525
160 220 60 34.7 240 480 70 70
M16 x160 A4 / C 35.8 475
170 240 100 38.0 255 510 80 80
M20 x170 A4 / C 55.9 720
210 280 100 52.2 315 630 90 90
M20 x 210 A4 / C 55.9 635
M24 x170 A4 170 240 100 38.0 71.1 255 945 510 80 80
C 76.0 1020
210 280 100 52.2 315 630 90 90
M24 x210 A4 / C 80.6 970
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration. A dowel with
axial spacing of s ≥ 3 x hef, for example, is considered a single dowel.
4) Valid for FIS HB injection mortar. See approval when using the FHP II-P or FHP II-PF mortar cartridges.
5) The specified loads are valid for anchorings in dry and damp concrete for temperatures in the anchoring base up to +50 °C (or in the short-term to +80 °C) and
borehole cleaning according to the approval.

Fischer Highbond dynamic anchor rods
Approved by the building authorities: Building Standards Approval, cracked con-

crete M 12 - M 16, approval no. Z-21.3-1748 for galvanically zinc-plated steel and
stainless steel HCR 1.4529.
Application: The Fischer Highbond FHB-A dynamic anchor rods are used in con-
junction with Fischer FIS HB injection mortar for fastening heavy objects in concrete
under dynamic loads. Main areas of application include industrial robots, overhead
and column-mounted slewing cranes, elevators, facade substructures, transmitter
masts and much more.
Properties: For dynamic, tension-free stress. Installation in the push-through pro-
cedure is possible. A combination of a specially shaped nut and washer ensures
the function of a dynamic load, even with setting inaccuracy. Temperature-sensitive
setting times.
Advantages:
- for dynamic alternating loads
Note: The Fischer FHB-A dyn Highbond anchors are only approved in conjunction
with Fischer FIS HB mortar cartridges. The mortar cartridges are not included in the
price of the anchor rods. Installation with mortar cartridges FHB II-P or FHB II-PF is
not possible.
DG 2142
Item no. Type Thread Hole Hole Borehole An- Clamping Mor- Price Pack-
Ø Ø in depth choring range, tar per 100 age
fixture through depth min. - max. need* pieces con-
attached tents
part
6265312100 FHB-dyn 12 x 100/25 M 12 mm 14 mm 15 mm 130 mm 100 mm 8 - 25 mm 7 • 10
*) scale marks. The FHB II 345 ml cartridge has 180 scale marks on it.
1 2 3 4
5 6 7 8
9 10 11 12
i Loads for Highbond dynamic FHB dyn anchor
minimum spacing
Permissible loads1) of a single dowel in cracked normal concrete (concrete pressure zone) of strength C20/253) (~B25) while the load is simul-
taneously reduced
Type Material effective minimum Installation per per necessary edge neces- min. axial min.
anchoring component torque missible missible spacing (at an edge) sary axial spacing edge
depth thickness tensile transverse for max. load. spacing for spacing
load load max. load
Tensile Transverse
hef hmin Tinst Nperm2) Vperm2) load load scr smin cmin
[mm] [mm] [Nm] [kN] [kN] ccr,N c [mm] [mm] [mm]
[mm] [mm]
FHB dyn 12 x 100 gzp. 100 200 40 14.1 6.7 150 100 300 100 1004)
FHB dyn 12 x 100 V gzp. 100 200 40 14.1 9.6 150 125 300 100 100
gzp., 8.8 23.0
FHB dyn 16 x 125 125 250 60 11.9 190 145 375 100 100
C / 1.4529 15.6
FHB dyn 16 x 125 V gzp. 125 250 60 23.0 17.0 190 185 375 100 100
FHB dyn 20 x 170 gzp. 170 340 100 28.1 17.0 255 175 510 150 150
FHB dyn 24 x 220 gzp. 220 440 120 28.9 22.2 330 200 660 180 180
The entire Z-21.3-1748 approval notice is to be observed for the measurement.

1) The permissible loads apply to the entire working stroke with more than 2 x 106 load cycles according to calculation procedure II (unknown underload and
unknown number of cycles). Higher loads are possible when using method I. The partial safety factors of the resistors governed in the approval as well as the par-
tial safety factor of the effect against fatigue yF,fat are taken into consideration. A dowel with axial spacing of s ≥ 3 x hef, for example, is considered a single dowel.
) The specified loads are valid for anchorings in dry and damp concrete for temperatures in the anchoring base up to +50 °C (or in the short-term to +80 °C) and
as well as for reduced edge and axial spacing (dowel groups). For multi-fasteners (more than one dowel per component to be connected), the permissible tensile
loads are to be divided by the value yFN = 1.25 and the permissible loads by the value yFV = 1.3.
4) Without reduction of the load.
Fischer Powerbond FIS PM 360 S Injection Mortar

cracked concrete M 10 - M 16, ETA-12/0160-ETAG 0001-1. For galvanically zinc-
plated steel, stainless steel A4 and HCR.
Application: The Fischer FIS PM Powerbond injection mortar system is used to
fasten heavy objects in cracked concrete. Main areas of application include metal
structures, facade substructures, railings, noise barriers, machines and much more.
Properties: The Fischer Highbond FIS PM injection system is a new, inexpensive
system for cracked concrete. It comprises Fischer FIS A anchor rods, FIS PS Power-
sleeve sleeves and the FIS PM special mortar. This combination unites the advantag-
es of tapered composite anchors and threaded rods. During push-through assembly,
the annular gap in the anchor base is filled up properly by the excess mortar. 360 ml
cartridge with external hardener. A gun with double rods is required for application.
Advantages:
- inexpensive injection system for cracked concrete
- very accurate anchoring depth of 60-192 mm
- Installation without a torque wrench and setting tool is permitted
DG 2134
Item no. Contents Scale Price per piece Package
divisions contents
62895360 360 ml 180 • 10
FIS PM cartridge tempera- FIS PM processing time Temperature FIS PM curing time
ture (mortar at least + 5 °C) in the anchoring base
- 5 °C - ± 0 °C 360 min.
± 0 °C - + 5 °C 180 min.
+ 5 °C - +20 °C 15 min. + 5 °C - +20 °C 90 min.
+20 °C - +30 °C 6 min. +20 °C - +30 °C 35 min.
+30 °C - +40 °C 4 min. +30 °C - +40 °C 20 min.
> +40 °C 2 min. > +40 °C 12 min.
Caution: The curing times must be doubled in wet concrete!

Fischer Superbond Mortar Cartridge RSB

cracked concrete M 8 - M 30, ETA-12/0258-ETAG 001-5.
Application: The Fischer RSB reaction anchor cartridges are used in conjunction
with Fischer RG M reaction anchor rods for fastening heavy objects in concrete.
Main areas of application include heavy metal structures, facade substructures, noise
barriers, guardrails and much more.
Properties: In conjunction with anchor rods from M 8 to M 30 and internally threaded
anchors from M 8 to M 20 (each in different materials) superbond offers versatile
fastening possibilities. The fastening system comprises RSB mortar cartridges with
RG M anchor rods or Fischer RG MI internally threaded anchors.
(K&K item no. 62034).
Advantages:
- particularly inexpensive all-around fastening in cracked concrete
- application temperature range of -40° to +150 °C
- independent of weather conditions, installation for mortar cartridges up to -30 °C
(temperature in the anchoring base)
- installation without a torque wrench and setting tool is permitted
- RSB mortar cartridge is permitted for installations in water-filled and diamond-
drilled boreholes
Note: The anchor rods are not included in the price of the Fischer mortar cartridges.
A cleaning tool is required for proper and compliant installation.
DG 2136
Item no. Type for anchor rods Hole Ø Borehole Anchoring Price Package
depth depth per 100 contents
pieces
62896880 RSB 8 x 80 RG M 8 10 mm 80 mm 80 mm • 10
628961075 RSB 10 mini x RG M 10 12 mm 75 / 150* 75 / 150* • 10
75/150* mm mm
628961090 RSB 10 x 90 RG M 10 / 12 / 14 90 mm 90 mm • 10
RG MI 8 mm
628961275 RSB 12 mini x RG M 12 14 mm 75 / 150* 75 / 150* • 10
75/150* mm mm
6289612110 RSB 12 x 110 RG M 12 / 14 / 18 110 mm 110 mm • 10
RG MI 10 mm
628961695 RSB 16 mini x RG M 16 18 mm 95 / 190* 95 / 190* • 10
95/190* mm mm
6289616125 RSB 16 x 125 RG M 16 / 18 / 20 125 mm 125 mm • 10
RG MI 12 mm
6289616160 RSB 16 E x 160 RG M 16 I 24 mm 160 mm 160 mm • 10
6289620170 RSB 20 x 170 RG M 20 25 mm 170 mm 170 mm • 10
6289624210 RSB 20 E / RG M 20 / RG 25 / 28 / 210 mm 210 mm • 5
24 x 210 M 24 / RG MI 20 32 mm
6289630280 RSB 30 x 280 RG M 30 35 mm 280 mm 280 mm • 5
*) for 2 cartridges in a row
Temperature in the anchoring base Curing times

> -30 °C to -20 °C 120 hours
> -15 °C to -10 °C 30 hours
> 0 °C to +5 °C 45 minutes
> 20 °C to 30 °C 5 minutes
1 2 3 4 5 6
Fischer anchor rod for reaction anchor

plated steel, stainless steel A4 and HCR 1.4529. Also suitable for cracked concrete
in conjunction with FIS Powerbond (with Powersleeve) and FIS Superbond European
Technical Approval Option 1 ETA-12/0160 and ETA-12/0258.
Application: The Fischer RG M reaction anchor rods are used in conjunction with
Fischer R M reaction anchor cartridges for fastening heavy objects in concrete.
Properties: Tension-free anchorage with small axial and edge spacing. Styrene-free
mortar based on vinyl ester resin. Temperature-sensitive setting times.
Advantages:
- anchoring without expansion pressure
- boreholes are sealed against moisture and weather effects
- can also be used in wet concrete and even under water
Note: Fischer RG M reaction anchor rods are only approved in conjunction with
Fischer R reaction anchor cartridges. The anchor rods are not included in the price
of the cartridges. All threaded rods have a hexagonal head as an insertion aid up
to and including size 16, as well as size M 20 x 260. An adapter comes with every
pack. All dimensions are cut off smoothly starting from anchor rod 20 x 350. Use in
conjunction with Powerbond only with Powersleeve.
galvanized DG 2147
Item no. Thread Ø x length Hole Ø Price per 100 pieces Package contents
625518 M 8 x 110 mm 10.0 mm • 10
6255110 M 10 x 130 mm 12.0 mm • 10
6255110165 M 10 x 165 mm 12.0 mm • 10
6255110190 M 10 x 190 mm 12.0 mm • 10
6255112 M 12 x 160 mm 14.0 mm • 10
6255112220 M 12 x 220 mm 14.0 mm • 10
6255112250 M 12 x 250 mm 14.0 mm • 10
6255112300 M 12 x 300 mm 14.0 mm • 10
6255114 M 14 x 170* mm 16.0 mm • 10
6255116165 M 16 x 165 mm 18.0 mm • 10
6255116 M 16 x 190 mm 18.0 mm • 10
6255116250 M 16 x 250 mm 18.0 mm • 10
6255116300 M 16 x 300 mm 18.0 mm • 10
6255120 M 20 x 260 mm 25.0 mm • 10
6255120350 M 20 x 350 mm 25.0 mm • 10
6202622 M 22 x 280* mm 30.0 mm • 5
6255124300 M 24 x 300 mm 28.0 mm • 10
6255127340 M 27 x 340 mm 32.0 mm • 5
6255130380 M 30 x 380 mm 35.0 mm • 5

625538110 M 8 x 110 mm 10.0 mm • 10
6255310130 M 10 x 130 mm 12.0 mm • 10
6255310165 M 10 x 165 mm 12.0 mm • 10
6255310190 M 10 x 190 mm 12.0 mm • 10
6255312160 M 12 x 160 mm 14.0 mm • 10
6255316190 M 16 x 190 mm 18.0 mm • 10
6255320260 M 20 x 260 mm 25.0 mm • 10
*) not included in the approval.
Reaction anchor rods
Dimension Hole Øsuitable for anchor suitable for anchor when using RSB min. anchoring depth max. clamping range
mm R cartridges and R cartridges and cartridges ** mm for mm for
anchoring depths clamping range max. RSB cartridges and RSB cartridges and
min. for R cartridges for R cartridges FSB mortar FSB mortar
M 8 x 110 10 mm R M8 / 80 mm R M8 / 14 mm RSB 8 80 mm 14 mm
M10 x 130 12 mm R M10 / 90 mm R M10 / 20 mm RSB 10 90 mm 20 mm
M10 x 130 12 mm RSB 10 mini 75 mm 35 mm
M10 x 190 12 mm 1 x RSB 10 mini 75 mm 95 mm
M10 x 190 12 mm 2 x RSB 10 mini 150 mm 20 mm
M12 x 220 14 mm 1xRSB 12 mini 75 mm 121 mm
M14 x 170 * 16 mm R M14 / 120 mm R M14 / 38 mm
M20 x 260 25 mm RSB 20E / 24 210 mm 14 mm
M20 x 350 25 mm RSB 20E / 24 210 mm 104 mm
M22 x 280 * 30 mm UKA22 / 190 mm UKA22 / 65 mm
M24 x 300 28 mm R M24 / 210 mm R M24 / 61 mm RSB 20E / 24 210 mm 61 mm
M27 x 340 32 mm R M27 / 250 mm R M27 / 60 mm
* M14 and M22 not part of the approval

** by using 2 mini cartridges, a higher anchoring depth is achieved and therefore higher load values.
Fischer RG MI internally threaded sleeve
Approved by the building authorities: Approved in conjunction with Fischer RG M

reaction anchor for anchorings in non-cracked concrete M 8 - M 20 as well as in
conjunction with FIS V injection mortar in non-cracked concrete M 6 - 20. As well as
in conjunction with FIS Superbond, also for cracked concrete, European Technical
Approval Option 1 ETA-12/0258.
Application: In conjunction with Fischer R M reaction anchor cartridges, Fischer
FIS V injection mortar, Fischer FIS SB superbond injection mortar or RSB reaction
cartridges, the Fischer RG MI internally threaded sleeves are used to fasten heavy
objects in concrete. Main areas of application include heavy metal structures that
need to be disassembled again later.
Advantages:
Note: Fischer RG MI reaction anchor internally threaded sleeves are only approved
in conjunction with Fischer R M reaction anchor cartridges, Fischer FIS V injection
mortar, Fischer FIS SB injection mortar or Fischer RSB reaction cartridges. The car-
tridges and the mortar are not included in the price of the internally threaded sleeves.
galvanized DG 2165
Item no. Type Thread Hole Ø mini-suitable RSB suitable R Price per Pack-
mum cartridges cartridges and 100 pieces age
anchor- and screw- screw-in depth con-
ing in depth of of screws in tents
depth screws in the the sleeve min./
sleeve min./ max. for R car-
max. for RSB tridges and
cartridges and FIS V mortar
FSB mortar
620316 RG 10 x 75 M6 I M 6* 12 mm 75 mm - R M10 / • 10
10 to 16 mm
620318 RG 12 x 90 M8 I M8 14 mm 90 mm RSB 10 / R M12 / • 10
8 to 18 mm 12 to 18 mm
6203110 RG 16 x 90 M10 I M 10 18 mm 90 mm RSB 12 / R M14 / • 10
10 to 23 mm 15 to 23 mm
6203112 RG 18 x 125 M12 I M 12 20 mm 125 mm RSB 16 / R M16E / • 10
12 to 26 mm 18 to 26 mm
6203116 RG 22 x 160 M16 I M 16 24 mm 160 mm RSB 16E / R M16E / • 5
16 to 35 mm 24 to 35 mm
6203120 RG 28 x 200 M20 I M 20 32 mm 200 mm RSB 20E/24 / R M20 / • 5
20 to 45 mm 30 to 45 mm
*) M 6 and are not included in the approval.

Item no. Type Thread Hole Ø mini- suitable RSB suitable R Price per Pack-
mum cartridges and cartridges and piece age
anchor- screw-in depth screw-in depth con-
ing of screws in of screws in the tents
depth the sleeve sleeve min./max.
min./max. for for R cartridges
RSB cartridges and FIS V mortar
and
FSB mortar
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203212 RG 18 x 125 M12 I M 12 20 mm 125 mm RSB 16 / R M16E / • 10
12 to 26 mm 18 to 26 mm

Fischer Superbond FIS SB 390 S injection mortar

cracked concrete M 8 - M 30, ETA-12/0258-ETAG 001-5.
Application: The Fischer Superbond FIS SB 390 S injection mortar is used for the
safety-related fastening of heavy objects in cracked and non-cracked concrete. Main
application area is the attachment of heavy steel structures, railings, noise barriers,
rebar connections as well as attachment in drying systems and much more.
Properties: In conjunction with anchor rods from M 8 to M 30 and internally threaded
anchors from M 8 to M 20 (each in different materials) superbond offers versatile
fastening possibilities.
The fastening system comprises FIS SB injection mortar, optionally with FIS A anchor
rod, RG M anchor rod or RG MI internally threaded anchor.
Installation instructions: A gun with double rods (K&K item no. 6203531 or 620356)
is required for applying the FIS SB injection mortar. The boreholes are to be cleaned
thoroughly with a blower (K&K item no. 62034) and brush.
Advantages:
- particularly inexpensive all-around fastening in cracked concrete
- application temperature range of -40 °C to +150 °C
- independent of weather conditions, installation for injection mortar permitted
up to -15 °C (temperature in the anchoring base)
- variable anchoring depth of 60 - 600 mm
- installation without a torque wrench and setting tool is permitted
Note: The Fischer Superbond FIS SB injection mortar is also approved in conjunction
with customary threaded rods with factory test 3.1. The anchor rods are not included
in the price of the Fischer mortar cartridges. Every cartridge comes with 2 mixing
tubes (K&K item no. 62884). For proper and compliant installation, cleaning tools,
special application guns and mixing tubes are necessary.
DG 2134
Item no. Type Contents Scale divisions Price per piece Package
contents
62896390 FIS SB 390 S 390 ml 180 • 10
Temperature in the anchoring base Curing times

> -15 °C to -10 °C 36 hours
> 0 °C to +5 °C 4 hours
> +20 °C to +30 °C 45 minutes
1 2 3 4 5
Fischer anchor rod FIS A
Application: Approved in conjunction with the Fischer FIS V injection mortar for
fastening in non-cracked concrete, masonry and aerated concrete and in conjunction
with FIS Powerbond with Powersleeve and FIS Superbond for cracked concrete.
bricks results in conjunction with FIS V injection mortar for small axial and edge
spacing.
Note: The Fischer FIS V injection mortar is only approved as a complete set
(FIS V injection mortar - FIS A anchor rods and FIS anchor sleeves (only for use
in perforated masonry)). The anchor rods with factor test 3.1 are an exception.
The mortar cartridges and sieve sleeves are not included in the price of the injection
mortar. Use in conjunction with Powerbond only with Powersleeve.
galvanized DG 2147
Item no. Thread Ø x length Price per 100 pieces Package contents
626868110 8 x 110 mm • 10
626868130 8 x 130 mm • 10
6268610110 10 x 110 mm • 10
6268610130 10 x 130 mm • 10
6268610150 10 x 150 mm • 10
6268610200 10 x 200 mm • 10
6268612120 12 x 120 mm • 10
6268612140 12 x 140 mm • 10
6268612160 12 x 160 mm • 10
6268612180 12 x 180 mm • 10
6268612210 12 x 210 mm • 10

626878110 8 x 110 mm • 10
626878130 8 x 130 mm • 10
6268710110 10 x 110 mm • 10
6268710130 10 x 130 mm • 10
6268710150 10 x 150 mm • 10
6268712120 12 x 120 mm • 10
6268712140 12 x 140 mm • 10
6268712160 12 x 160 mm • 10
6268712210 12 x 210 mm • 10
6268712260 12 x 260 mm • 10

Anchor rod FIS A
Fischer FIS A anchor rods zinc-plated and stainless steel with Fischer FSB Fischer FIS A anchor rods zinc-plated and stainless steel with Fischer FIS V
mortar in cracked and non-cracked concrete and FIS V High Speed in non-cracked concrete
Dimension Hole Ø mm Anchoring Max. clamp- Filling Dimension Hole Ø mm Anchoring Max. clamp- Filling
mm depth ing range quantity * mm depth ing range quantity *
min/max depending depending mm depending at min.
mm on anchoring on anchoring on anchoring anchoring
depth mm depth depth mm depth
8 x 110 10 60 / 98 39 2/3 8 x 110 10 60 36 2
8 x 130 10 60 / 118 59 2/4 8 x 130 10 60 56 2
10 x 110 12 60 / 96 37 3/4 10 x 110 12 60 20 3
10 x 130 12 60 / 116 57 3/5 10 x 130 12 60 40 3
10 x 150 12 60 / 136 77 3/5 10 x 150 12 60 60 3
10 x 200 12 60 / 186 127 3/7 10 x 200 12 60 110 3
12 x 120 14 70 / 103 34 3/5 12 x 120 14 70 19 4
12 x 140 14 70 / 123 54 3/6 12 x 140 14 70 39 4
12 x 160 14 70 / 143 74 3/7 12 x 160 14 70 59 4
12 x 180 14 70 / 163 94 3/7 12 x 180 14 70 79 4
12 x 210 14 70 / 193 124 3/9 12 x 210 14 70 109 4
12 x 260 14 70 / 240 174 3 / 19 12 x 260 14 70 159 4
* Number of scale marks on the Fischer mortar cartridge * Number of scale marks on the Fischer mortar cartridge
Fischer FIS A anchor rods zinc-plated and stainless steel with Fischer FIS V Fischer FIS A anchor rods zinc-plated and stainless steel with Fischer FIS V
and FIS V High Speed in solid brick masonry and FIS V High Speed in perforated brick masonry
Dimension Hole Ø mm Min. Max. clamp- Filling Dimension with injection Hole Ø Min. Max. clamp-
mm anchoring ing range quantity * mm anchor sleeve mm anchoring ing range
depth depending at min. depth depending
mm on anchoring anchoring mm on anchoring
depth mm depth depth mm
8 x 110 10 75 24 3 8 x 110 FIS H12 x 50K 12 50 49
8 x 130 10 75 44 3 8 x 110 FIS H12 x 85K 12 85 14
10 x 110 12 75 22 4 8 x 110 FIS H16 x 85K 16 85 14
10 x 130 12 75 42 4 8 x 130 FIS H12 x 50K 12 to 16 50 69
10 x 150 12 75 62 4 8 x 130 FIS H12 x 85K 12 to 16 85 34
10 x 200 12 75 112 4 8 x 130 FIS H16 x 85K 12 to 16 85 43
12 x 120 14 75 29 5 10 x 110 FIS H16 x 85K 16 85 12
12 x 140 14 75 44 5 10 x 130 FIS H16 x 85K 16 85 32
12 x 160 14 75 64 5 10 x 150 FIS H16 x 85K 16 85 52
12 x 180 14 75 84 5 10 x 150 FIS H16 x 130K 16 130 7
12 x 210 14 75 114 5 10 x 200 FIS H16 x 85K 16 85 102
12 x 260 14 75 164 5 10 x 200 FIS H16 x 130K 16 130 57
* Number of scale marks on the Fischer mortar cartridge 12 x 120 FIS H20 x 85K 20 85 19
12 x 140 FIS H20 x 85K 20 85 39
12 x 160 FIS H20 x 85K 20 85 59
Fischer FIS A anchor rods zinc-plated and stainless steel with Fischer FIS V
and FIS V High Speed in aerated concrete 12 x 160 FIS H20 x 130K 20 130 14
Dimension Hole Ø mm Min. Max. clamp- Filling 12 x 180 FIS H20 x 85K 20 85 79
mm anchoring ing range quantity * 12 x 180 FIS H20 x 130K 20 130 34
depth depending at min. 12 x 210 FIS H20 x 85K 20 85 109
mm on anchoring anchoring 12 x 210 FIS H20 x 130K 20 130 64
depth mm depth 12 x 260 FIS H20 x 85K 20 85 169
8 x 110 14 75 25 15 12 x 260 FIS H20 x 130K 20 130 114
8 x 130 14 75 45 15 12 x 260 FIS H20 x 200K 20 200 44
10 x 110 14 75 25 15 For filling quantities, see injection anchor sleeves
10 x 130 14 75 45 15
10 x 150 14 75 65 15
10 x 200 14 75 115 15
12 x 120 14 75 30 15
12 x 140 14 75 50 15
12 x 160 14 75 70 15
12 x 180 14 75 90 15
12 x 210 14 75 115 15
12 x 260 14 75 170 15
* Number of scale marks on the Fischer mortar cartridge
Approved by the building authorities: Approved in conjunction with Fischer R M

reaction anchor for anchorings in non-cracked concrete M 8 - M 20 as well as in
conjunction with FIS V injection mortar in non-cracked concrete M 6 - M 20. As well
as in conjunction with FIS Superbond, also for cracked concrete, European Technical
Advantages:
galvanized DG 2165
Item no. Type Thread Hole Ø Minimum suitable RSB suitable R Price Package
anchor- cartridges cartridges and per 100 contents
ing depth and screw- screw-in depth pieces
in depth of of screws in
screws in the the sleeve min./
max. for RSB tridges and FIS
cartridges and V mortar
FSB mortar
620316 RG 10 x 75 M6 I M 6* 12 mm 75 mm - R M10 / • 10
10 to 16 mm
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203112 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm
6203116 RG 22 x 160 M 16 24 mm 160 mm RSB 16E / R M16E / • 5
M16 I 16 to 35 mm 24 to 35 mm
6203120 RG 28 x 200 M 20 32 mm 200 mm RSB 20E/24 / R M20 / • 5
M20 I 20 to 45 mm 30 to 45 mm

Item no. Type Thread Hole Ø Mini- suitable RSB suitable R Price per Package
mum cartridges and cartridges and piece contents
anchor- screw-in depth screw-in depth
ing of screws in of screws in the
and FSB
mortar
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203212 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm

Fischer R reaction anchor

Application: The Fischer R reaction anchors are used to fasten heavy objects in con-
crete. Main application areas include heavy metal constructions of all kinds, facade
substructures (threaded rod A4), noise barriers, guardrails,
machinery, devices and much more. Insert the mortar cartridges into the well-cleaned
borehole and then insert the anchor rods with a rotating and hammering machine.
The two components are mixed into a rapidly curing synthetic resin mortar and the
entire surface of anchor rod is bonded. Note: Sales stop within the catalog’s
Properties: Tension-free anchorage with small axial and edge spacing. Styrene-free period of validity. An alternative is
mortar based on vinyl ester resin. Temperature-sensitive setting times. the RSB mortar cartridge (page 838),
Advantages: which has clear advantages in the
- anchoring without expansion pressure area of approval and application.
-b oreholes are sealed against moisture and weather effects
Note: Fischer reaction anchor rods are only approved in conjunction with Fischer RM
reaction anchor cartridges. The RM anchor rods are not included in the price of the
cartridges. The boreholes must be free of dust.
DG 2136
Item no. Thread Drill Ø Anchoring depth Price per Package
100 pieces contents
625508 M8 10 mm 80 mm • 10
6255010 M 10 12 mm 90 mm • 10
6255012 M12 14 mm 110 mm • 10
6255014 M 14 ** 16 mm 120 mm • 10
6255016 M 16 18 mm 125 mm • 10
6255416 E - M 16 * 18 / 20 mm 190 mm • 10
6255020 M 20 25 mm 170 mm • 10
6202422 M 22 ** 30 mm 190 mm • 5
6255024 M 24 28 mm 210 mm • 5
6255027 M 27 32 mm 250 mm • 5
6255030 M 30 35 mm 280 mm • 5
*) If the E cartridge is not used in conjunction with internally threaded sleeve M 12, then a hole 20 mm in diameter must
be drilled.
**) M 14 and M 22 are not included in the approval (except for M 14 in conjunction with the internally threaded sleeve M 10,
this anchoring is then approved again).
M 22 is type UKA 3 by Upat.
Temperature in the borehole Curing times

> +20 °C 10 minutes
> 0 °C 45 minutes
> - 5 °C 240 minutes
The curing time is extended if there is moisture in the borehole.
1 2 3
Fischer anchor rod for reaction anchor

plated steel, stainless steel A4 and HCR 1.4529. Also suitable for cracked concrete
in conjunction with FIS Powerbond (with Powersleeve) and FIS Superbond European
Technical Approval Option 1 ETA-12/0160 and ETA-12/0258.
Application: The Fischer RG M reaction anchor rods are used in conjunction with
Fischer R M reaction anchor cartridges for fastening heavy objects in concrete.
Advantages:
-b oreholes are sealed against moisture and weather effects
Note: Fischer RG M reaction anchor rods are only approved in conjunction with
Fischer R M reaction anchor cartridges. The anchor rods are not included in the price
of the cartridges. All threaded rods have a hexagonal head as an insertion aid up
to and including size 16, as well as size M 20 x 260. An adapter comes with every
pack. All dimensions are cut off smoothly starting from anchor rod 20 x 350. Use in
conjunction with Powerbond only with Powersleeve.
galvanized DG 2147
625518 M 8 x 110 mm 10.0 mm • 10
6255110 M 10 x 130 mm 12.0 mm • 10
6255110165 M 10 x 165 mm 12.0 mm • 10
6255110190 M 10 x 190 mm 12.0 mm • 10
6255112 M 12 x 160 mm 14.0 mm • 10
6255112220 M 12 x 220 mm 14.0 mm • 10
6255112250 M 12 x 250 mm 14.0 mm • 10
6255112300 M 12 x 300 mm 14.0 mm • 10
6255114 M 14 x 170* mm 16.0 mm • 10
6255116165 M 16 x 165 mm 18.0 mm • 10
6255116 M 16 x 190 mm 18.0 mm • 10
6255116250 M 16 x 250 mm 18.0 mm • 10
6255116300 M 16 x 300 mm 18.0 mm • 10
6255120 M 20 x 260 mm 25.0 mm • 10
6255120350 M 20 x 350 mm 25.0 mm • 10
6202622 M 22 x 280* mm 30.0 mm • 5
6255124300 M 24 x 300 mm 28.0 mm • 10
6255127340 M 27 x 340 mm 32.0 mm • 5
6255130380 M 30 x 380 mm 35.0 mm • 5

625538110 M 8 x 110 mm 10.0 mm • 10
6255310130 M 10 x 130 mm 12.0 mm • 10
6255310165 M 10 x 165 mm 12.0 mm • 10
6255310190 M 10 x 190 mm 12.0 mm • 10
6255312160 M 12 x 160 mm 14.0 mm • 10
6255316190 M 16 x 190 mm 18.0 mm • 10
6255320260 M 20 x 260 mm 25.0 mm • 10
*) not included in the approval.


reaction anchor for anchorings in non-cracked concrete M8 - M20 as well as in
conjunction with FIS V injection mortar in non-cracked concrete M6 - M20. As well as
Advantages:
galvanized DG 2165
Item no. Type Thread Hole Ø mini-suitable RSB suitable R Price Package
mum an- cartridges cartridges and per 100 contents
choring and screw- screw-in depth pieces
depth in depth of of screws in
screws in the the sleeve min./
FSB mortar
620316 RG 10 x 75 M6 I M 6* 12 mm 75 mm - R M10 / • 10
10 to 16 mm
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203112 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm
M16 I 16 to 35 mm 24 to 35 mm
6203120 RG 28 x 200 M 20 32 mm 200 mm RSB 20E/24 / R M20 / • 5
M20 I 20 to 45 mm 30 to 45 mm

Item no. Type Thread Hole Ø mini- suitable RSB suitable R Price per Package
and FSB
m
ortar
62058 RG 12 x9 0 M8 I M8 14 mm 90 mm RSB 10 / R M12 / • 10
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203212 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm
i Loads for R reaction anchor with Fischer RG M anchor rod
reduced
Type Anchor rod effective minimum instal- per per necessary edge spac- necessary min. axial min.
material anchoring com- lation missible missible ing (at an edge) for axial spac- spacing edge spacing
depth ponent torque tensile trans- max. load. ing for max.
thickness load verse tensile load
R with load without edge
Fischer influences
anchor rod Tensile load Transverse
RG M hef hmin Tinst Nperm2) Vperm2) c load scr smin cmin
[mm]
gzp., 5.8 8.8 4.2 60
RG M 8 gzp., 8.8 hef = 80 110 ≤ 10 8.8 6.5 100 85 240 40 40
A4-70 8.8 5.9 75
gzp., 5.8 12.3 7.6 90
RG M 10 gzp., 8.8 hef = 90 120 ≤ 20 12.3 11.7 135 150 270 45 45
A4-70 12.3 9.3 115
gzp., 5.8 19.7 11.0 115
RG M 12 gzp., 8.8 hef = 110 150 ≤ 40 19.7 17.0 150 190 330 55 55
A4-70 19.7 13.5 145
gzp., 5.8 21.1 11.0 105 105
RG M 12 E gzp., 8.8 hef = 150 200 ≤ 40 26.9 17.0 140 150 450 75 75
A4-70 22.5 13.5 110 120
gzp., 5.8 28.4 20.5 215
RG M 16 gzp., 8.8 hef = 125 160 ≤ 60 28.4 31.5 235 350 375 65 65
A4-70 28.4 25.1 270
gzp., 5.8 39.3 20.5 175 155
RG M 16 E hef = 190 250 ≤ 60 570 95 95
gzp., 8.8 43.2 31.5 210 250
gzp., 5.8 45.8 32.0 270
RG M 20 gzp., 8.8 hef = 170 220 ≤ 120 45.8 49.3 305 450 510 85 85
A4-70 45.8 39.2 345
gzp., 5.8 60.9 32.0 265 205
RG M 20 E hef = 240 300 ≤ 120 720 120 120
gzp., 8.8 64.6 49.3 290 350
gzp., 5.8 64.1 46.1 335
RG M 24 gzp., 8.8 hef = 210 280 ≤ 150 64.1 70.9 365 565 630 105 105
A4-70 64.1 56.5 430
gzp., 5.8 87.7 46.1 340 255
RG M 24 E hef = 290 380 ≤ 150 870 145 145
gzp., 8.8 88.5 70.9 345 440
gzp., 5.8 85.8 60.1 395
RG M 27 gzp., 8.8 hef = 250 330 ≤ 200 85.8 92.4 420 670 990 125 125
A4-70 85.8 73.6 510
gzp., 5.8 100.5 73.3 450
RG M 30 gzp., 8.8 hef = 280 370 ≤ 300 100.5 112.7 465 765 1.110 140 140
A4-70 100.5 89.8 580
axial spacing of s ≥ 3 x hef, for example, is considered a single dowel. For specific information, see the approval notice. The specified loads are valid
for the anchorings in dry and damp concrete for temperatures in the anchoring base from -40 °C to +50 °C (or in the short-term to +80 °C) and
premium cleaning according to the approval notice.
3) At higher concrete strengths up to C50/60, permissible loads up to 35% higher are possible. See approval. The concrete is assumed to be normally reinforced
unreinforced.

i Loads for R reaction anchor with Fischer RG M I internally threaded anchor
reduced
Type Anchor rod effective minimum instal- per per necessary edge necessary min. axial min.
material anchoring com- lation missible missible spacing (at an edge) axial spac- spacing edge spacing
R with depth ponent torque tensile trans- for max. load. ing for max.
Fischer thickness load verse tensile load
internally load without edge
threaded influences
anchor Tensile load Transverse
RG M hef hmin Tinst Nperm2) Vperm2) c load scr smin cmin
[mm]
gzp., 5.8 9.1 5.3 75 65
RG M 8 I
gzp., 8.8 hef = 90 120 ≤ 10 13.8 8.2 140 95 270 45 45
RG M 8 I A4 A4-70 9.9 5.9 85 70
gzp., 5.8 14.4 8.5 165 95 275
RG M 10 I
gzp., 8.8 hef = 90 120 ≤ 20 16.7 13.0 195 155 390 45 45
RG M 10 I A4 A4-70 15.7 9.3 185 105 340
gzp., 5.8 21.1 12.3 180 110 375
RG M 12 I
gzp., 8.8 hef = 125 170 ≤ 40 23.8 18.9 210 180 420 60 60
RG M 12 I A4 A4-70 22.5 13.5 200 120 375
gzp., 5.8 35.7 22.8 175
RG M 16 I
gzp., 8.8 hef = 160 220 ≤ 60 35.7 35.1 250 300 500 80 80
RG M 16 I A4 A4-70 35.7 25.1 200
gzp., 5.8 54.8 35.7 245
RG M 20 I
gzp., 8.8 hef = 200 270 ≤ 120 54.8 64.9 305 420 610 100 100
RG M 20 I A4 A4-70 54.8 39.2 275
axial spacing of s ≥ 3 x hef, for example, is considered a single dowel. For specific information, see the approval notice. The specified loads are valid
for the anchorings in dry and damp concrete for temperatures in the anchoring base from -40 °C to +50 °C (or in the short-term to +80 °C) and
premium cleaning according to the approval notice.
3) At higher concrete strengths up to C50/60, permissible loads up to 35% higher are possible. See approval. The concrete is assumed to be normally reinforced
unreinforced.
Fischer FIS V 360 S injection mortar

steel, stainless steel A4 and HCR 1.4529. Building Standards Approval Z-21.3-1824
for solid and perforated masonry M 6 to M 16 and aerated concrete M 8 to M 12.
Galvanically zinc-plated anchor rods and stainless steel A4 as well as the approval
ETA-10/0383 for many additional new types of stone.
Application: The Fischer FIS V injection mortar based on vinyl ester resin is used
to fasten medium-weight to heavy objects in masonry, solid and perforated brick,
aerated concrete, lime sand, solid and perforated masonry as well as in non-
cracked concrete. Main areas of application include heavy metal structures of all
kinds, facade substructures, machinery, devices and much more. The two resin and
hardener components are first mixed when they leave the cartridge. In this way, the
remaining content of the cartridge continues to function. It is only necessary to screw
on a new mixing tube after long interruptions.
Properties: The Fischer FIS V injection mortar is based on styrene-free vinyl ester
resin. Free of expansion pressure, for small axial and edge spacing. Each mortar
cartridge comes with 2 mixing tubes.
and cleaning brush. The hardener is attached in a separate tube on the outside.
A gun with 2 plungers item no. 6203531 or item no. 620356 is required for dispens-
ing. Installation only permitted with torque wrench.
Advantages:
Note: The Fischer injection system is only permitted in conjunction with FIS-A
anchor rods or anchor rods with factory test 3.1 and for use in perforated masonry
with FIS anchor sleeves. The anchor rods and sieve sleeves are not included in the
price of the Fischer injection system. For proper and compliant installation, cleaning
tools, special application guns, mixing tubes and, depending on the substrate, sieve
sleeves are necessary.
21.8-1783
DG 2134
6203526 560g = 360 cm³ • 1
Waiting time until the load is applied (the temperature in the anchoring depth may not fall below +5 °C during curing).
Temperature in the anchoring base Curing times (reference values)

> +5 °C 90 minutes
1 2 3 4 5

Fischer injection mortar FIS V 360 S - Set

for solid and perforated masonry M 6 to M 16 and aerated concrete M 8 to M 12.
Application: The Fischer FIS V injection mortar is used to fasten medium-weight to
heavy objects in masonry, solid and perforated brick, aerated concrete, lime sand,
solid and perforated masonry as well as in non-cracked concrete. Main areas of ap-
plication include heavy metal structures of all kinds, facade substructures, machinery,
devices and much more. The two resin and hardener components are first mixed
when they leave the cartridge. In this way, the remaining content of the cartridge
continues to function. It is only necessary to screw on a new mixing tube after long
interruptions.
Advantages:
Note: The Fischer injection mortar is only permitted in conjunction with FIS A thread-
ed rods or threaded rods with factory test 3.1 and for use in perforated masonry with
FIS-H anchor sleeves. The threaded rods and anchor sleeves are not included in the
price of the Fischer injection mortar. For proper and compliant installation, cleaning
21.8-1783
DG 2134
Item no. Cartridge contents Set contents Price per set Package contents
6203528 560g = 360 cm³ 20 Cartridges, • 1
40 Static mixer

> +5 °C 90 minutes
1 2 3 4 5
Fischer injection mortar FIS V 360 S - system case

for solid and perforated masonry M 6 to M 16 and aerated concrete. M 8 to M 12.
interruptions.
Scope of supply: 3Cartridges, 6 mixing tubes, 1 FIK AK application gun, 1 blower,
1 set of brushes
Advantages:
- also approved for the use of customary threaded rods with factory test 3.1 21.8-1783
FIS-H anchor sleeves. The threaded rods and anchor sleeves are not included in the
DG 2134
Item no. Type Contents Price per case Package contents
6203529 FIS V 360 S shuttle cartridge 12 pieces • 1

> +5 °C 90 minutes
1 2 3 4 5
1 2 3 4 5

Fischer injection mortar FIS V 150 C

Galvanically zinc-plated anchor rods and stainless steel A4.
interruptions.
Advantages:
FIS-H anchor sleeves. The threaded rods and anchor sleeves are not included in the 21.8-1783
DG 2134
Item no. Cartridge contents Scope of supply Price per piece Package
contents
6203527 145 ml 1 Mortar cartridge, • 1
1 Application plunger, 2 static mixer

> +5 °C 90 minutes
1 2 3 4 5
Fischer injection mortar FIS V HIGH SPEED

steel, stainless steel A4 and HCR 1.4529. Approval no. Z-21.3-1824 for solid and
perforated masonry M 6 to M 16 and aerated concrete. M 8 to M 12. Galvanically
zinc-plated anchor rods and stainless steel A4 as well as the approval ETA-10/0383
for many additional new types of stone.
Application: The Fischer FIS V HIGH SPEED injection mortar based on vinyl ester
resin is used to fasten medium-weight to heavy objects in masonry, solid and perfo-
rated brick, aerated concrete, lime sand, solid and perforated masonry as well as in
non-cracked concrete. The two resin and hardener components are first mixed when
they leave the cartridge. In this way, the remaining content of the cartridge continues
to function. It is only necessary to screw on a new mixing tube after long interruptions.
Properties: The Fischer FIS V HIGH SPEED injection mortar is based on styrene-free
vinyl ester resin. Free of expansion pressure, for small axial and edge spacing. Each
mortar cartridge comes with 2 mixing tubes. Thanks to the special formula, the mor-
tar can also be used at extreme winter temperatures of -15 °C. At warmer tempera-
tures, a shorter processing time must be taken into account.
(item no. 62034) and cleaning brush. A gun with 2 plungers (item no. 6203531 or item
no. 620356) is required for application.
Advantages:
- more rapid curing and load-bearing capacity
- hardly any limitations at cold temperatures
Note: The Fischer injection system is approved in conjunction with FIS-A anchor
rods, RG MI internally threaded anchors, anchor rods with factory test 3.1 and for use
in perforated masonry FIS anchor sleeves. The anchor rods, internally threaded an-
chors and sieve sleeves are not included in the price of the Fischer injection system.
21.8-1783
DG 2134
629557010 360 ml • 1
Item accessories
62741 Fischer tapered drill bit PBB •
Temperature in the anchoring base Processing time Curing times in dry concrete
-15 °C to -10 °C - 12 hours*
-10 °C to -5 °C - 8 hours*
-5 °C to +5 °C 5 minutes 3 hours
0 °C to -5 °C 5 minutes 90 minutes
+5 °C to +10 °C 3 minutes 45 minutes
+10 °C to +20 °C 1 minute 30 minutes
*) without approval

Fischer anchor rod FIS A
Application: Approved in conjunction with the Fischer FIS V injection mortar for
fastening in non-cracked concrete, masonry and aerated concrete and in conjunction
with FIS Powerbond with Powersleeve and FIS Superbond for cracked concrete.
bricks results in conjunction with FIS V injection mortar for small axial and edge
spacing.
Note: The Fischer FIS V injection mortar is only approved as a complete set
(FIS V injection mortar - FIS A anchor rods and FIS anchor sleeves (only for use
in perforated masonry)). The anchor rods with factor test 3.1 are an exception.
The mortar cartridges and sieve sleeves are not included in the price of the anchor
rods. Use in conjunction with Powerbond only with Powersleeve.
galvanized DG 2147
626868110 8 x 110 mm • 10
626868130 8 x 130 mm • 10
6268610110 10 x 110 mm • 10
6268610130 10 x 130 mm • 10
6268610150 10 x 150 mm • 10
6268610200 10 x 200 mm • 10
6268612120 12 x 120 mm • 10
6268612140 12 x 140 mm • 10
6268612160 12 x 160 mm • 10
6268612180 12 x 180 mm • 10
6268612210 12 x 210 mm • 10

626878110 8 x 110 mm • 10
626878130 8 x 130 mm • 10
6268710110 10 x 110 mm • 10
6268710130 10 x 130 mm • 10
6268710150 10 x 150 mm • 10
6268712120 12 x 120 mm • 10
6268712140 12 x 140 mm • 10
6268712160 12 x 160 mm • 10
6268712210 12 x 210 mm • 10
6268712260 12 x 260 mm • 10

reaction anchor for anchorings in non-cracked concrete M8 - M20 as well as in
conjunction with FIS V injection mortar in non-cracked concrete M6 - M20. As well as
Advantages:
galvanized DG 2165
Item no. Type Thread Hole Ø mini-suitable RSB suitable R Price Package
mum cartridges cartridges and per 100 contents
anchor- and screw- screw-in depth pieces
ing in depth of of screws in
depth screws in the the sleeve min./
FSB mortar
620316 RG 10 x 75 M6 I M 6* 12 mm 75 mm - R M10 / • 10
10 to 16 mm
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203112 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm
M16 I 16 to 35 mm 24 to 35 mm
6203120 RG 28 x 200 M 20 32 mm 200 mm RSB 20E/24 / R M20 / • 5
M20 I 20 to 45 mm 30 to 45 mm

Item no. Type Thread Hole Ø mini- suitable RSB suitable R Price per Package
and FSB mor-
tar
8 to 18 mm 12 to 18 mm
10 to 23 mm 15 to 23 mm
6203212 RG 18 x 125 M 12 20 mm 125 mm RSB 16 / R M16E / • 10
M12 I 12 to 26 mm 18 to 26 mm

i L
oads for FIS V and FIS V HIGH SPEED injection system with Fischer FIS A / RG M
anchor rods
reduced
Type Anchor rod effective installation permissible permissible necessary minimum min. axial min.
material anchoring torque tensile load transverse axial spac- component spacing edge spacing
FIS V and depth load ing for max. thickness
FIS V High tensile load
Speed with without edge
Fischer influences
anchor rod hef3) Tinst Nperm2) Vperm2) scr hmin smin cmin
[mm] [Nm] [kN] [kN] [mm] [mm] [mm] [mm]
gzp., 5.8 2.9
gzp., 8.8 hef, min = 50 3.4 4.6 150 100 40 40
A4-70 3.2
M6 ≤5
gzp., 5.8 2.9
gzp., 8.8 hef, max = 72 4.8 4.6 216 102 40 40
A4-70 3.2
gzp., 5.8 5.1
gzp., 8.8 hef,min = 60 6.6 9.1 180 100 40 40
A4-70 6.0
M8 ≤ 10
gzp., 5.8 9.0 5.1
gzp., 8.8 hef, max = 160 14.3 9.1 480 190 40 40
A4-70 9.9 6.0
gzp., 5.8 8.6
gzp., 8.8 hef, min = 60 8.2 13.1 180 100 45 45
A4-70 9.2
M 10 ≤ 20
gzp., 5.8 13.8 8.6
gzp., 8.8 hef, max = 200 22.4 13.1 600 230 45 45
A4-70 15.7 9.2
gzp., 5.8 12.0
gzp., 8.8 hef,min = 70 11.5 19.4 210 100 55 55
A4-70 13.7
M 12 ≤ 40
gzp., 5.8 20.5 12.0
gzp., 8.8 hef, max = 240 32.4 19.4 720 270 55 55
A4-70 22.5 13.7
gzp., 5.8 22.3
gzp., 8.8 hef, min = 80 14.3 34.4 240 116 65 65
A4-70 25.2
M 16 ≤ 60
gzp., 5.8 37.6 22.3
gzp., 8.8 hef, max = 320 60.0 36.0 960 356 65 65
A4-70 42.0 25.2
gzp., 5.8 34.9
gzp., 8.8 hef,min = 90 17.1 41.1 270 138 85 85
A4-70 39.4
M 20 ≤ 120
gzp., 5.8 58.6 34.9
gzp., 8.8 hef, max = 400 93.3 56.0 1.200 448 85 85
A4-70 65.7 39.4
gzp., 5.8
gzp., 8.8 hef, min = 96 18.8 45.2 288 152 105 105
A4-70
M 24 ≤ 150
gzp., 5.8 84.3 50.9
gzp., 8.8 hef, max = 480 129.3 80.6 1.440 536 105 105
A4-70 94.3 56.8
gzp., 5.8
gzp., 8.8 hef,min = 120 26.3 63.2 360 190 140 140
A4-70
M 30 ≤ 300
gzp., 5.8 133.8 80.6
gzp., 8.8 hef, max = 600 190.7 128.5 1.800 670 140 140
A4-70 150.1 90.2
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration. A dowel
with axial spacing of s ≥ 3 x hef, for example, is considered a single dowel. For specific information, see the approval notice. The specified loads are
valid for the anchorings in dry and wet concrete for temperatures in the anchoring base from -40 °C to +50 °C (or in the short-term to +80 °C) and
borehole cleaning according to the approval notice.
3) The anchoring depth hef can be selected freely between the values hef,min and hef,max according to the static requirements.
4) At higher concrete strengths up to C50/60, higher permissible loads are possible if concrete cone failure is standard. See approval.
i L
oads for FIS V and FIS V HIGH SPEED injection system with RG M I internally
threaded anchor
reduced
Type Screw effective minimum installation permissible permissible necessary min. axial min.
m
aterial anchoring component torque tensile load transverse axial spac- spacing edge spacing
FIS V or depth thickness load ing for max.
FIS V High tensile load
Speed with without edge
Fischer influences
internally hef hmin Tinst Nperm2) Vperm2) scr smin cmin
threaded [mm] [mm] [Nm] [kN] [kN] [mm] [mm] [mm]
anchor
RG M 8 I gzp., 8.8 11.9 8.5
90 120 ≤ 10 270 40 40
RG M 8 I A4 A4-70 9.9 5.9
RG M 10 I gzp., 8.8 15.9 13.3
90 125 ≤ 20 270 45 45
RG M 10 I A4 A4-70 15.7 9.3
RG M 12 I gzp., 8.8 19.3
125 165 ≤ 40 19.8 375 60 60
RG M 12 I A4 A4-70 13.5
RG M 16 I gzp., 8.8 35.8
160 205 ≤ 80 29.8 480 80 80
RG M 16 I A4 A4-70 25.1
RG M 20 I gzp., 8.8 42.9
200 260 ≤ 120 45.6 600 125 125
RG M 20 I A4 A4-70 39.4
1) The partial safety factors of the resistors governed in the approval as well as a partial safety factor of the effect yF = 1.4 are taken into consideration. A dowel
with axial spacing of s ≥ 3 x hef, for example, is considered a single dowel. For specific information, see the approval notice. The specified loads are
valid for the anchorings in dry and wet concrete for temperatures in the anchoring base from -40 °C to +50 °C (or in the short-term to +80 °C) and
borehole cleaning according to the approval notice.
3) At higher concrete strengths up to C50/60, higher permissible loads are possible up to 35% if concrete cone failure is standard. See approval.
i L
oads for FIS V and FIS V HIGH SPEED injection system with FIS A5) anchor rod or
FIS E 5) internally threaded anchor with FIS H...K anchor sleeves
Very high permissible loads1)6) of a single dowel in perforated brick masonry
Solid masonry
Type Anchor- effective minimum installation permissible permissible min. axial axial spacing min. axial minimum
ing base anchoring component torque8) load3) load3) spacing within dowel spacing2) edge
strength depth4) thickness9) hammer rotary drilled single dowel group within dowel spacing7)
class drilled group
hef hmin Tinst Fperm Fperm az a min a ar
[-] [mm] [mm] [Nm] [kN] [kN] [mm] [mm] [mm] [mm]
Hollow brick HLz
M6 - M16 HLz 4 85 110 ≤4 0.3 0.6 250 100 50 200 (50)
M6 - M16 HLz 6 85 110 ≤4 0.4 0.8 250 100 50 200 (50)
M6 - M16 HLz 12 85 110 ≤4 0.8 1.0 250 100 50 200 (50)
Porous sand-lime brick KSL
M6 - M16 KSL 4 85 110 ≤4 0.4 0.610) 250 100 50 200 (50)
M6 - M16 KSL 6 85 110 ≤4 0.6 0.810) 250 100 50 200 (50)
M6 - M16 KSL 12 85 110 ≤4 0.8 0.410) 250 100 50 200 (50)
Hollow lightweight concrete brick Hbl
M6 - M16 Hbl 2 85 110 ≤4 0.3 0.5 250 200 200 200 (50)
M6 - M16 Hbl 4 85 110 ≤4 0.6 0.8 250 200 200 200 (50)
Hollow concrete blocks Hbn
M6 - M16 Hbn 4 85 110 ≤4 0.6 0.8 250 200 200 200 (50)
Porous lightweight concrete TGL
M8 - M10 - 85 175 ≤4 1.3 1.3 200 150 100 200 (150)
M12 - M16 - 85 175 ≤4 2.0 2.0 250 150 100 200 (150)

2) Minimum edge spacing for dowel pairs or groups of four and simultaneous reduction of the permissible load.
3) Valid for tensile loads, transverse loads and diagonal pull at any angle. See approval notice for bending moments and reduced axial spacing (dowel groups). The
maximum load, which according to the approval may be applied to a block, is to be taken into account depending on the block size and load. In HLz masonry that
was built before 1977, an increase in load may be possible according to approval section 3.2.3.1.
4) Values apply to anchor rods FIS A M6 - M16 as well as internally threaded anchors FIS E M6 - M12. Plaster bridging (bridging non-structural layers) possible up
to 20 mm max. - except for KSL. For anchor rods FIS A M6 and M8 as well as hef = 50 mm with anchor sleeve FIS H 12 x 50 K—without bridging non-structural
layers. Other anchoring depths up to 200 mm and non-structural layer thicknesses up to 100 mm are possible, see approval.
5) gzp and A4. For FIS E, screw of strength class 5.8 or A4-70. FIS E only governed from M6 to M12 according to the approval.
6) The specified permissible loads are valid for anchorings in dry and damp masonry for temperatures up to +50 °C (or in the short-term to +80 °C) and borehole
cleaning according to the approval notice.
7) The value in parentheses applies to masonry with load or tilt indication. Does not apply for shear loads oriented toward the free edge.
8) 2 Nm, if not laid in a mortar bed (for non-adjacent anchoring plate on the anchoring base).
9) For hef = 50 mm, hmin = 90 mm; for hef = 130 mm, hmin =150 mm and for hef = 200 mm, hmin = 240 mm.
10) KSL must have an external support strength of at least 30 mm (old blocks).
i L
oads for FIS V and FIS V HIGH SPEED injection system with anchor rod FIS A5) or
FIS E internally threaded anchor 5)
Very high permissible loads1)6) of a single dowel in solid brick masonry
Solid masonry
Type Anchoring effective minimum installation permissible min. axial axial spacing min. axial minimum
base strength anchoring component torque8) load3) spacing single within dowel spacing2) edge spacing7)
class depth4) thickness dowel group within dowel
group
hef hmin Tinst Fperm az a min a ar
[-] [mm] [mm] [Nm] [kN] [mm] [mm] [mm] [mm]
Solid bricks Mz
M6 - M8 Mz 12 75 110 ≤4 1.0 (1.4)9) 250 100 50 250 (60)
M10 - M 16 Mz 12 75 110 ≤4 1.70 250 100 50 250 (60)
Solid sand-lime brick and stone blocks KS
M6 - M8 KS 12 75 110 ≤4 1.0 (1.4)9) 250 100 50 250 (60)
M10 - M 16 KS 12 75 110 ≤4 1.70 250 100 50 250 (60)

2) Minimum edge spacing for dowel pairs or groups of four and simultaneous reduction of the permissible load.
3) Valid for tensile loads, transverse loads and diagonal pull at any angle. See approval notice for bending moments and reduced axial spacing (dowel groups).
The maximum load, which according to the approval may be applied to a block, is to be taken into account depending on the block size and load.
4) Values apply to FIS A anchor rods. When using the FIS E internally threaded anchor (M6 to M12), the anchoring depth is 85 mm instead of 75 mm.
5) gzp and A4. For FIS E, screw of strength class 5.8 or A4-70. FIS E only governed from M6 to M12 according to the approval.
8) 2 Nm, if not laid in a mortar bed (for non-adjacent anchoring plate on the anchoring base).
9) The value in parentheses applies to masonry with load. When using the anchor sleeve FIS H...K , the load for M8 cannot be increased to 1.7 kN
(does not apply to FIS H 12 x 50 K).
i L
oads for FIS V and FIS V HIGH SPEED injection system with anchor rod FIS A5) or
FIS E internally threaded anchor 5)
Very high permissible loads1)6) of a single dowel in aerated concrete
Solid masonry
Type Anchoring effective minimum installation permissible min. axial axial spacing min. axial minimum
base strength anchoring component torque8) load3) spacing single within dowel spacing2) edge spacing7)
class depth4) thickness dowel group within dowel
group
hef hmin Tinst Fperm az a min a ar
[-] [mm] [mm] [Nm] [kN] [mm] [mm] [mm] [mm]
Aerated concrete blocks / aerated concrete blocks
P2 75 110 ≤5 0.9 250 200 50 200 (100)
FIS A M8 - P2 95 (85)4) 110 ≤5 1.3 250 250 50 200 (150)
M12; P4 75 110 ≤5 1.2 250 200 50 200 (100)
FIS E M6; P4 95 (85)4) 110 ≤5 1.7 250 250 50 200 (150)
FIS E M8 P6 75 110 ≤5 1.6 250 200 50 200 (100)
P6 95 (85)4) 110 ≤5 2.1 250 250 50 200 (150)
reinforced and unreinforced wall slabs, reinforced roof and ceiling slabs (each pressure zone and in the tensile zone created by load tensions)
G 2.29) 75 110 ≤5 0.9 250 200 50 200 (100)
FIS A M8 - G 2.29) 95 (85)4) 110 ≤5 1.4 250 250 50 200 (150)
M12; G 3.3 75 110 ≤5 1.2 250 200 50 200 (100)
FIS E M6; G 3.3 95 (85)4) 110 ≤5 1.6 250 250 50 200 (150)
FIS E M8 G 4.4 75 110 ≤5 1.4 250 200 50 200 (100)
G 4.4 95 (85)4) 110 ≤5 1.9 250 250 50 200 (150)

2) Minimum edge spacing for dowel pairs or groups of four and simultaneous reduction of the permissible load. Does not apply to reinforced roof and ceiling slabs.
3) Valid for tensile loads, transverse loads and diagonal pull at any angle. See approval notice for bending moments and reduced axial spacing (dowel groups).
4) The values in parentheses apply to FIS E M6 - M8 internally threaded anchor.
5) gzp and A4. For FIS E, screw of strength class 5.8 or A4-70. Only FIS E M6 and FIS E M8 permissible.
8) 10 Nm, for FIS A M10 and FIS A M 12.
9) This quality is not governed in the approval for floor height, reinforced wall slabs.
Fischer injection push-through anchor sleeve FIS H K
Application: The FIS H K push-through anchor rods are used to fasten thick wooden
beams in perforated masonry.
Properties: The FIS H K anchor sleeves prevent the mortar from moving into
the chambers of the perforated masonry. Suitable for push-through installation.
The anchor sleeves have a scale of 0-20 cm on the upper part and can simply
be shortened to the respective thickness of the fixture as required.
Note: During assembly, the sieve sleeves is filled from the anchor base. The mixing
tube is slowly pulled out of the anchor sleeve during dispensing.
DG 2173
Item no. Type for anchor rods Hole Ø Minimum Clamp- Overall Price Pack-
anchoring length per 100 age
ing depth range, pieces con-
max. tents
6268818130 FIS-18 x 130/200 M12 18 mm 130 mm 200 mm 330 mm • 10
6268822130 FIS-22 x 130/200 M16 22 mm 130 mm 200 mm 330 mm • 10
1 2 3 4 5
Fischer injection push-through anchor sleeve FIS H K Set

Complete with zinc-plated anchor rod.
Application: Approved in conjunction with Fischer FIS V injection mortar.
The FIS H K SET push-through anchor sleeves are used to fasten thick wooden
beams in perforated brick.
Properties: The FIS H K anchor sleeves prevent the mortar from moving into the
chambers of the perforated masonry. Suitable for push-through installation.
Delivered as a set with pre-installed threaded rods. The FIS H K anchor sleeves have 21.8-1783
a scale of 0-20 cm on the upper part and can simply be shortened to the respective
thickness of the fixture as required.
Note: During assembly, the sieve sleeves is filled from the anchor base. The mixing
tube is slowly pulled out of the anchor sleeve during dispensing.
galvanized DG 2173
Item no. Type with anchor Hole Minimum Clamp- Overall Price Pack-
rod Ø anchoring ing length per 100 age
depth range, pieces con-
max. tents
6268718130 FIS-18 x 130/200 M 12/200 M 12 x 200 mm 18 mm 130 mm 200 mm 330 mm • 10
6268722130 FIS-22 x 130/200 M 16/200 M 16 x 200 mm 22 mm 130 mm 200 mm 330 mm • 10
1 2 3 4 5

Fischer UMV composite anchor cartridges
Approved by the building authorities: General building supervision approval

for dynamic use in cracked concrete M12 - M24 approval no. Z-21.3-1662 made
of galvanically zinc-plated steel.
Application: In conjunction with the Fischer UMV multicone dynamic anchor rods,
the Fischer UMV multicone composite anchor cartridges are used to fasten heavy
objects under the conditions of dynamic stress in concrete. Main areas of application
include industrial robots, overhead and column-mounted slewing cranes, elevators,
facade substructures, transmitter masts and much more.
Properties: For dynamic stress. Tension-free anchorage with small axial and edge
spacing. Styrene-free mortar based on vinyl ester resin. Temperature-sensitive setting 21.8-1783
times.
Installation instructions: Clean the boreholes thoroughly and insert the anchor rods
with a rotating and hammering machine. Then drive in the installation sleeve for force
transmission. Installation only permitted with torque wrench.
Advantages:
- for dynamic alternating loads
- crack resistance ensures very high safety
- anchoring low in expansion pressure permits small edge and axial spacing
Note: Fischer UMV multicone composite anchor cartridge is only approved in
conjunction with Fischer UMV dynamic anchor rods. The anchor rods are not
included in the price of the cartridges.
DG 2136
Item no. Type Thread Drill Ø Anchoring Price per Package
6202212100 UMV 100 M 12 15 mm 115 mm • 10
6202216125 UMV 125 M 16 18 mm 140 mm • 10
6202220170 UMV 170 M 20 25 mm 190 mm • 10
6202224220 UMV 220 M 24 28 mm 245 mm • 5
Temperature in the borehole Wait time

> 0 °C 1 hour
The curing time is extended if there is moisture in the borehole.
1 2 3 4 5
Fischer UMV multicone dynamic anchor rod
Application: The Upat UMV dynamic composite anchor rods are only approved
for applications with dynamic alternating loads in cracked concrete, approval
no. Z-21.3-1662, in conjunction with Upat UMV dynamic composite anchors.
If cracks appear in the concrete, the cones spread out the mortar shell and compen-
sate for the borehole expansion. Clamping bushings ensure even load distribution
and make it possible to absorb dynamic alternating loads.
Installation instructions: Installation is only permitted with torque wrenches.
Note: Next, drive in the clamping bushings (come with every pack) for force trans-
mission. All threaded rods have a hexagonal head as an insertion aid up to and
including the size M 16. An adapter comes with every pack. The anchor rods M 20
and M 24 are cut off smoothly. The through hole in the component to be connected 21.8-1783
is mandatory.
galvanized DG 2143
Item no. Type Thread Overall Hole Ø x Clamping An- Through required Price Pack-
length drill depth range choring hole in cartridge per 100 age
depth attached pieces con-
part tents
620431210 100 M 12/10 M 12 145 mm 15 x 115 mm 5 - 10 mm 100 mm 16 mm 100 M 12 P • 10

Fischer FIS EM epoxy resin mortar

cracked concrete M 8 - M 30, approval no. ETA-10/0012 for galvanically zinc-plated
steel and stainless steel A4. ETA-09/0089 and Building Standards Z-21.8-1874 for
rebar connections with reinforcing steel 8-40 mm and Fischer FRA 12-20 rod anchor.
Application: The FIS EM Fischer epoxy resin mortar is used to fasten maximum
loads in cracked concrete. Main application areas include heavy metal structures as
well as later rebar connections.
Properties: The Fischer FIS EM epoxy resin mortar is can bear very high loads and is
very fit for cracks, but also a relatively long setting time and is there for only recom-
mended for installations where setting times are not relevant. It is suitable for a com-
bination with various steel parts such as Fischer FIS A threaded rods, Fischer FIS E
internally threaded anchors, customary threaded rods with factory test 3.1, Fischer
FRA rod anchors, as well as reinforcing steel.
Permits anchorings as with rebar set in concrete.
It is only necessary to screw on a new mixing tube after long interruptions. Every car-
tridge comes with 2 mixing tubes. No torque inspection is necessary for the FIS EM.
Advantages:
- very high loads in cracked concrete
- suitable for under water applications
- ideal for series installations due to prolonged processing and curing times
- suitable for diamond-drilled boreholes
Note: The boreholes are to be cleaned thoroughly according to the specifications of
the approval.
If the FIS EM mortar is used for subsequent rebar connections, it should be noted
that the company tasked with manufacturing the rebar connections must have a pro-
fessional staff that is specially trained for this work. Certification courses are offered
by Fischer.
For proper and compliant installation, cleaning tools, special application guns and 21.8-1783
DG 2131
Item no. Contents Scope of supply Price per piece Package contents
62883390 390 ml 2 Static mixer • 1
Item accessories
62884 FIS Mixer Red Static Mixer for Fischer injection mortar •
Fischer FIS V 360 S injection mortar for rebar connection
Approved by the building authorities: Building Standards approval Z-21.8-1783 for

subsequent rebar connection.
Application: Subsequent rebar connections of 8-28 mm fastening can be carried out
with the Fischer FIS V injection mortar based on vinyl ester resin. The mortar bonds
the entire surface of the rebar with the borehole wall and anchorings as with rebar
set in concrete form. Please refer to the page for the Fischer FIS V 360 S injection
system for further applications and technical information.
Note: In Germany, certification is required for compliant execution. Certification
courses are offered by the Fischer Academy.
Installation: The aids required for installation can be found packaged in the FIS rebar
case item no. 6203521 according to the requirements on the construction site.
Shuttle cartridges (side by side cartridges) Fischer FIS V 360 S: For these
cartridges, the hardener is attached in a separate tube on the outside. A gun with
2 plungers item no. 6203531, 620356 or the pneumatic design item no. 6203522 is
required for application.
21.8-1783
DG 2134
6203526 560g = 360 cm³ • 1

> +5 °C 90 minutes
1 2 3 4
Mixing tube for Fischer injection mortar
Application: The mixing tube serves as a nozzle for the injection mortar FIS V 360 S,
FIS V 150 C and Fischer High Speed. The mixing tube must be replaced in the event
of long interruptions. DG 2172
contents
620371 for 360 cm³ • 1

Fischer FIS rebar case
Application: Plastic carrying case with tools and equipment for the approved
creation of additional reinforcement.
Scope of supply: 8 cleaning brushes, 5 extensions for cleaning brushes, each
at 40 cm, 1 SDS holder for internal thread M 8, 8 injection aids, 1 cleaning hose,
2 cleaning nozzles each for drills 12-15, 16-19, 20-25 and 30-35 mm, 1 brush
control template, 1 red marking tape, 2 fork wrench WAF 7, 1 installation log and
10 setting log.
DG 2172
Item no. Price per case Package contents
6203521 • 1
Fischer cleaning brushes with connection thread
Application: For mechanically cleaning the boreholes.

DG 2172
Item no. Brush diam- Thread Ø Price per Package
eter piece contents
6204712 12 mm M8 • 1
6204714 14 mm M8 • 1
6204716 16 mm M8 • 1
6204718 18 mm M8 • 1
6204720 20 mm M8 • 1
6204725 25 mm M8 • 1
6204730 30 mm M8 • 1
6204735 35 mm M8 • 1
Fischer injection aids
Application: Plastic sleeve as an aid when filling the boreholes.
Diameter 9 mm DG 2172
Item no. for borehole Ø Price per Package
100 pieces contents
6204812 12 mm • 10
6204814 14 mm • 10
6204816 16 mm • 10
6204818 18 mm • 10
6204820 20 mm • 10
6204825 25 mm • 10
6204830 30 mm • 10
6204835 35 mm • 10
Diameter 15 mm DG 2172
Item no. for borehole Ø Price per Package
100 pieces contents
6204920 20 mm • 10
6204925 25 mm • 10
6204930 30 mm • 10
6204935 35 mm • 10
Fischer Thermax
Application: The Fischer Thermax dowels M8 - M10 are used to fasten light to
medium-weight to heavy objects in insulated substrates made of concrete, aerated
concrete, solid and perforated masonry or wood. Main application areas include
lamps, mailboxes, alarm systems, downpipes, signs and much more.
Properties: Thermal separation minimizes heat loss. Self-cutting, glass-fiber-
reinforced cone cuts through the plaster in the in the insulation. Adjustable from
0-20 mm. A variety of connection options with metric, sheet metal and chipboard
screws. Can also be screwed directly into wood without a dowel.
Advantages:
- the plastic cone interrupts the thermal bridge and provides energetically optimized
fastening
- no large-scale removal of insulation necessary
UX 10 Dowels for
anchoring in common
materials. adjustable Working length Anti-cold cone
0 - 20 mm 45 - 160 mm
Different connec-
{
Stud screws can be screwed into
dowel UX or directly into wood. tion possibilities.
Note: The building thermography shows

where heat loss is a threat. On windows,
doors, joints and connection points.
Anywhere where the thermal insulation is
breached. The Fischer Thermax anchor
quickly, easily and effectively prevents the
thermal bridge.
DG 2091
Item no. Type Contents Hole Ø Working Connec- Price Pack-
length tion option per 100 age
chipboard pieces con-
or metric tents
screws
62715860 Thermax 8/60 M 6 20 x UX 10 / Thermax / SX 5 / 10 mm 45 - 60 mm 3 - 4.5 / M 6 • 20
cover caps
cover caps
627158100 Thermax 8/100 M 6 20 x UX 10 / Thermax / SX 5 / 10 mm 80 - 100 mm 3 - 4.5 M 6 • 20
cover caps
cover caps
cover caps
cover caps
627158180 Thermax 8/180 M 6 20 x UX 10 / Thermax / SX 5 / 10 mm 160 - 180 mm 3 - 4.5 / • 20
cover caps M6
cover caps
cover caps
cover caps
Fill annular gap with Fischer DK sealant adhesive.

Continuation of Fischer Thermax
DG 2091
Item no. Type Contents Hole Ø Working Connec- Price Pack-
length tion option per 100 age
chipboard pieces con-
or metric tents
screws
cover caps
cover caps
cover caps
cover caps
cover caps
cover caps
6271710100 Thermax 10/ 20 x UX 12 / Thermax / 12 mm 80 - 100 mm M 10 • 20
100 M 10 cover caps
120 M 10 cover caps
140 M 10 cover caps
160 M 10 cover caps
1 2 3 4
5 6 7 8
Fischer Thermax with approval
Approved by the building authorities: Building Standards approval Z-21.8-1837 in

conjunction with Fischer FIS V, FIS VS and FIS VW mortar approved for insulation-
bridging anchorings in masonry, solid and perforated bricks, lime sand, solid and
perforated blocks as well as in aerated concrete and concrete.
Furthermore, the following approvals govern the seat of the threaded rods in the
substrate:
ETA-02/0024 in conjunction with Fischer FIS V mortar for non-cracked concrete.
ETA-10/0012 in conjunction with Fischer FIS EM mortar for cracked concrete.
Z-21.3-1824 in conjunction with Fischer FIS V mortar for masonry, brick and aerated
concrete.
For M12 and M16 anchor rods in galvanically zinc-plated steel and stainless steel A4.
Application: The Fischer Thermax dowels M 12 - M 16 are used to fasten medium-
weight to heavy objects in insulated substrates made of concrete, aerated concrete,
solid and perforated masonry. Main application areas include spaced structures,
marquees, awnings, carports, French balconies, window grates and much more.
Properties: Thermal separation minimizes heat loss. Self-cutting, glass-fiber-rein-
forced cone cuts through the plaster in the in the insulation. Continuously adjustable,
avoiding pressure points or damage to the WDVS. Large effective length range of
60-170 mm. Economical installation without special tools and without removing the
insulation.
Installation instructions: For durable plaster (e.g. thick cement plaster) it is recom-
mended to insert the enclosed shaping blade into one of the three depressions of the
anti-cold cone for milling and to remove them again after use.
Advantages:
- the plastic cone interrupts the thermal bridge and provides energetically optimized
fastening
- no large-scale removal of insulation necessary
Note: The building thermography shows where heat loss is a threat. On windows,
doors, joints and connection points. Anywhere where the thermal insulation is
breached. The Fischer Thermax anchor quickly, easily and effectively prevents the
thermal bridge.
DG 2091
Item no. Type Contents Price per piece Package contents
626821212 Thermax 12/110 M12 5 pieces • 20
626821612 Thermax 16/170 M12 5 pieces • 20
There is 1 screw insert and 1 extension tubes for the composite mortar in every
package.
Minimum purchase quantity 20 piece.

Fischer FIS V 360 S injection mortar for Thermax

Application: The Fischer FIS V injection mortar based on vinyl ester resin is used
to fasten stand-off installation with thermal separation in thermal insulation systems
(WDVS). Please refer to the page for the Fischer FIS V 360 S injection system for
further applications and technical information .
Properties: The Fischer FIOS V injection mortar is based on styrene-free vinyl ester
resin. Free of expansion pressure, for small axial and edge spacing.
Installation: The boreholes are to be cleaned thoroughly with a blower and cleaning
brush.
2 plungers, item no. 6203531 or 620356 is required for application.
Note: This cartridge contains 2 separated chambers with mortar and hardener.
A powerful customary silicone application gun, e.g. item no. 620355, suffices for
dispensing.
21.8-1783
DG 2134
6203526 560g = 360 cm³ • 1

> +5 °C 90 minutes
1 2 3 4 5
6 7 8 9 10
i Loads for Thermax 12 and 16
Stand-off installation system Thermax 12 and 16 with structural anchor rod made of galvanized steel with 1 mm displacement
The following load table applies to short-term loads (e.g. wind load). If the tightness of the annular gap between Thermax and plaster
is ensured by the Fischer Multi adhesive and sealant KD, the Thermax variants with the substrate-side anchor rod made of galvanically
zinc-plated steel may be used.
Very high permissible loads1) 6) 11) of a Thermax within a group fastening2) in masonry8) with FIS V or FIS V HIGH SPEED and in concrete with
FIS V, FIS V HIGH SPEED, FIS EM or FIS PM in conjunction with Powersleeve FIS PS.
Type mini- permis- permis- permis- permis- permis- permis- permis- permis- permis- permis- mini- min. min.
mum sible sible sible sible sible sible sible sible sible sible mum required required
effective tensile trans- trans- trans- trans- trans- trans- trans- trans- trans- com- axial edge
anchor- load verse verse verse verse verse verse verse verse verse ponent spacing spacing
ing load at load at load at load at load at load at load at load at load at thick- (dowel
depth tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix = ness group)
62 mm 100 mm 120 mm 140 mm 160 mm 180 mm 200 mm 250 mm 300 mm
hef5)13) Nperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4)
hmin a (smin) ar (cmin)8)
[mm] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
[mm] [mm] [mm]
Hollow brick ≥ Hlz 12
Thermax 125) 130 1.009) 0.839) 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 5012) 50
Thermax 165) 200 1.009) 1.009) 0.859) 0.629) 0.45 0.34 0.26 0.21 0.14 0.08 240 5012) 50
Porous sand-lime brick ≥ KSL 12
Thermax 125) 130 1.409) 0.839) 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 5012) 50
Thermax 165) 200 1.409) 1.409) 0.859) 0.62 0.45 0.34 0.26 0.21 0.14 0.08 240 5012) 50
Hollow brick lightweight concrete ≥ Hbl 2
Thermax 125) 130 0.509) 0.50 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 200 50
Thermax 165) 200 0.509) 0.50 0.50 0.50 0.45 0.34 0.26 0.21 0.14 0.08 240 200 50
Thermax 125) 130 0.809) 0.80 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 200 50
Thermax 165) 200 0.809) 0.80 0.80 0.62 0.45 0.34 0.26 0.21 0.14 0.08 240 200 50
Solid brick ≥ Mz 12
Thermax 1213) 95 1.709) 0.83 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 5012) 60
Thermax 1613) 125 1.709) 1.519) 0.85 0.62 0.45 0.34 0.26 0.21 0.14 0.08 175 5012) 60
Solid sand-lime brick and stone blocks ≥ KS 12
Thermax 1213) 95 1.709) 0.83 0.49 0.31 0.21 0.16 0.11 0.08 - - 175 5012) 60
Thermax 1613) 125 1.709) 1.519) 0.85 0.62 0.45 0.34 0.26 0.21 0.14 0.08 175 5012) 60
Non-cracked concrete with FIS V or FIS V High Speed and cracked concrete with FIS EM or FIS PM in conjunction with Powersleeve, concrete strength
each ≥ C20/25 (~B25)
100
Thermax 1213) 70 (72)10) 3.407) 0.88 0.49 0.31 0.21 0.16 0.11 0.08 - - 55 55
(104)10)
116
Thermax 1613) 80 (96)10) 3.407) 1.51 0.85 0.62 0.45 0.34 0.26 0.21 0.14 0.08 60 60
(136)10)
The entire Z-21.8-1837 approval notice, as well as Z-21.3-1824, ETA-02/0024, ETA-10/0012 or ETA-12/0160 are to be observed for the measurement.
Maximum installation torque Tinst,max = 20 Nm - fastening screw M12
1) Required safety factors are taken into consideration.
2) Arrangement of at least two anchoring points in the transverse load direction and frame effect with bend-proof frame. See approval for individual fasteners.
3) For combinations of tensile and transverse loads, see the approval notice. In masonry, the maximum permissible load per brick according to approval
Z-21.3-1824, annex 9, table 9 cannot be exceeded.
4) Values apply if drilling is done in perforated masonry (Hlz, KSL, Hbl) using a rotary drill (without impact). KSL must have an external support strength of at least
30 mm (old bricks). Hammer drilling in solid bricks and concrete. When using the FIS PM in conjunction with Powersleeve, diamond drilling in concrete is also
possible.
5) The standard Thermax 12 can span non-structural thicknesses up to 110 mm max. in hollow brick, perforated sand-lime bricks and hollow blocks made of light-
weight concrete, and the Thermax 16 to 170 mm. When using other anchor sleeves and potentially also longer anchor rods, as well as when reducing the anchor-
ing depth, greater working lengths are possible with Thermax 12 up to 200 mm and with Thermax 16 to 300 mm - see approval.
6) The specified permissible loads are valid for anchorings in a dry and damp anchoring base for temperatures up to +50 °C (or in the short-term to +80 °C) in the
area of the mortaring and for borehole cleaning according to the approval notice. The load values apply to a substrate-side anchor rod made of galvanized steel of
strength 8.8 for other strengths or stainless steel, see approval.
7) Complies with the permissible tensile load of the Thermax cone.
8) Only applies to masonry with load or tilt indication. Does not apply for shear loads oriented toward the free edge.
9) Required axial spacing in the dowel group (4 dowels max.) must be increased according to approval Z-21.3-1824 (FIS V) to up to 100 mm.
10) Values in the parentheses apply to FIS PM.
11) It is permissible to interpolate intermediate values of transverse loads independent of tFix linear unless specified otherwise in the approval.
12) Only applies to pure transverse load. For tensile loads or the interaction of tensile and transverse loads, see approval FIS V masonry Z-21.3-1824.
13) The standard Thermax 12 can span non-structural thicknesses up to 165 mm max. in solid bricks and solid sand-lime bricks, and the Thermax 16 up to 295 mm.
The standard Thermax 12 can span non-structural thicknesses up to 170 mm max. in concrete, and the Thermax 16 up to 290 mm. When using longer anchor
sleeves and in solid masonry with reduced anchoring depth compared to the table value, greater working lengths are possible with Thermax 12 up to 200 mm and
with Thermax 16 up to 300 mm see approval.

i Loads for Thermax 12 and 16
Stand-off installation system Thermax 12 and 16 with structural anchor rod made of stainless steel A4 with 3 mm displacement
The following load table applies to short-term loads (e.g. wind load). Measures for sealing, see approval, section 3.2.4
Very high permissible loads1) 6) 11) of a Thermax within a group fastening2) in masonry8) with FIS V or FIS V HIGH SPEED
and in concrete with FIS V, FIS V HIGH SPEED, FIS EM or FIS PM in conjunction with Powersleeve FIS PS.
Type mini- permis- permis- permis- permis- permis- permis- permis- permis- permis- permis- mini- min. min.
mum sible sible sible sible sible sible sible sible sible sible mum required required
effective tensile trans- trans- trans- trans- trans- trans- trans- trans- trans- com- axial edge
anchor- load verse verse verse verse verse verse verse verse verse ponent spacing spacing
ing load at load at load at load at load at load at load at load at load at thick- (dowel
depth tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix = ness group)
62 mm 100 mm 120 mm 140 mm 160 mm 180 mm 200 mm 250 mm 300 mm
hef5)13) Nperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4) Vperm3)4)
hmin a (smin) ar (cmin)8)
[mm] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN]
[mm] [mm] [mm]
Hollow brick ≥ Hlz 12
Thermax 125) 130 1.009) 0.839) 0.54 0.45 0.39 0.35 0.30 0.23 - - 175 5012) 50
Thermax 165) 200 1.009) 1.009) 0.989) 0.839) 0.719) 0.639) 0.56 0.51 0.42 0.23 240 5012) 50
Porous sand-lime brick ≥ KSL 12
Thermax 125) 130 1.409) 0.839) 0.54 0.45 0.39 0.35 0.30 0.23 - - 175 5012) 50
Thermax 165) 200 1.409) 1.409) 0.989) 0.839) 0.71 0.63 0.56 0.51 0.42 0.23 240 5012) 50
Thermax 125) 130 0.509) 0.50 0.50 0.45 0.39 0.35 0.30 0.23 - - 175 200 50
Thermax 165) 200 0.509) 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.42 0.23 240 200 50
Thermax 125) 130 0.809) 0.80 0.54 0.45 0.39 0.35 0.30 0.23 - - 175 200 50
Thermax 165) 200 0.809) 0.80 0.80 0.80 0.71 0.63 0.56 0.51 0.42 0.23 240 200 50
Solid brick ≥ Mz 12
Thermax 1213) 95 1.709) 0.83 0.54 0.45 0.39 0.35 0.30 0.23 - - 175 5012) 60
Thermax 1613) 125 1.709) 1.519) 0.989) 0.83 0.71 0.63 0.56 0.51 0.42 0.23 175 5012) 60
Solid sand-lime brick and stone blocks ≥ KS 12
Thermax 1213) 95 1.709) 0.83 0.54 0.45 0.39 0.35 0.30 0.23 - - 175 5012) 60
Thermax 1613) 125 1.709) 1.519) 0.989) 0.83 0.71 0.63 0.56 0.51 0.42 0.23 175 5012) 60
Non-cracked concrete with FIS V or FIS V High Speed and cracked concrete with FIS EM or FIS PM in conjunction with Powersleeve, concrete strength
each ≥ C20/25 (~B25)
100
Thermax 1213) 70 (72)10) 3.407) 0.88 0.56 0.48 0.41 0.36 0.30 0.23 - - 55 55
(104)10)
116
Thermax 1613) 80 (96)10) 3.407) 1.51 0.98 0.83 0.71 0.63 0.56 0.51 0.42 0.23 60 60
(136)10)
The entire Z-21.8-1837 approval notice, as well as Z-21.3-1824, ETA-02/0024, ETA-10/0012 or ETA-12/0160 are to be observed for the measurement.
Maximum installation torque Tinst,max = 20 Nm - fastening screw M12
1) Required safety factors are taken into consideration.
2) Arrangement of at least two anchoring points in the transverse load direction and frame effect with bend-proof frame. See approval for individual fasteners.
3) For combinations of tensile and transverse loads, see the approval notice. In masonry, the maximum permissible load per brick according to approval
Z-21.3-1824, annex 9, table 9 cannot be exceeded.
4) Values apply if drilling is done in perforated masonry (Hlz, KSL, Hbl) using a rotary drill (without impact). KSL must have an external support strength of at least
30 mm (old bricks). Hammer drilling in solid bricks and concrete. When using the FIS PM in conjunction with Powersleeve, diamond drilling in concrete is also
possible.
5) The standard Thermax 12 can span non-structural thicknesses up to 110 mm max. in hollow brick, perforated sand-lime bricks and hollow blocks made of light-
weight concrete, and the Thermax 16 to 170 mm. When using other anchor sleeves and potentially also longer anchor rods, as well as when reducing the anchor-
ing depth, greater working lengths are possible with Thermax 12 up to 200 mm and with Thermax 16 to 300 mm - see approval.
6) The specified permissible loads are valid for anchorings in a dry and damp anchoring base for temperatures up to +50 °C (or in the short-term to +80 °C) in the
area of the mortaring and for borehole cleaning according to the approval notice. The load values apply to a substrate-side anchor rod made of galvanized steel of
strength 8.8 for other strengths or stainless steel, see approval.
7) Complies with the permissible tensile load of the Thermax cone.
8) Only applies to masonry with load or tilt indication. Does not apply for shear loads oriented toward the free edge.
9) Required axial spacing in the dowel group (4 dowels max.) must be increased according to approval Z-21.3-1824 (FIS V) to up to 100 mm.
10) Values in the parentheses apply to FIS PM.
11) It is permissible to interpolate intermediate values of transverse loads independent of tFix linear unless specified otherwise in the approval.
12) Only applies to pure transverse load. For tensile loads or the interaction of tensile and transverse loads, see approval FIS V masonry Z-21.3-1824.
13) The standard Thermax 12 can span non-structural thicknesses up to 165 mm max. in solid bricks and solid sand-lime bricks, and the Thermax 16 up to 295 mm.
The standard Thermax 12 can span non-structural thicknesses up to 170 mm max. in concrete, and the Thermax 16 up to 290 mm. When using longer anchor
sleeves and in solid masonry with reduced anchoring depth compared to the table value, greater working lengths are possible with Thermax 12 up to 200 mm and
with Thermax 16 up to 300 mm see approval.
Fischer sealant adhesive KD for Thermax dowels
Type: The Fischer KD sealant adhesive is used to seal the annular gap of Thermax
anchor rods M 12 / M 16.
Properties: On an MS polymer basis. Silicone and solvent-free. Aging, weather, and
UV-resistant.
Item no. Color Contents Price per Package

piece contents
62743 white 260 ml • 1
Fischer cleaning brushes
Application: For cleaning boreholes when installing with composite mortar and
composite anchors.
DG 2172
Item no. Type for hole Ø Overall Price per Package
length piece contents
6264110 BS 10 10 mm 150 mm • 1
6264112 BS 12 12 mm 150 mm • 1
6264114 BS 14 14 mm 250 mm • 1
626411618 BS 16/18 16 + 18 mm 250 mm • 1
6264125 BS 25 25 mm 300 mm • 1
6264128 BS 28 28 mm 300 mm • 1
6264135 BS 35 30 mm 300 mm • 1
Fischer blower
Application: For cleaning boreholes when installing with composite anchors and
composite mortar.
DG 2172
62034 • 1
Mixing tube for Fischer injection mortar
Application: The mixing tube serves as a nozzle for the injection mortar FIS V 360 S,
FIS V 150 C and Fischer High Speed. The mixing tube must be replaced in the event
of long interruptions.
DG 2172
contents
620371 for 360 cm³ • 1
FIS Mixer Red Static Mixer for Fischer injection mortar
Application: The mixing tube is used as a nozzle for the injection mortar High Bond
FHB, Superbond FSB, Powerbond F and FIS EM. The mixing tube must be replaced
in the event of long work interruptions.
DG 2172
62884 • 1

Fischer extension tube
Application: For applying the injection mortar cartridges to hard-to-reach areas.
DG 2172
Item no. Length Pipe Price per Package
diameter piece contents
620404 100 cm 9 mm • 1
Fischer sieve sleeve
Type: For longer anchoring depths, additional metal sieve sleeves are offered in
uncut lengths.
DG 2174
Item no. Type Hole Ø x sleeve length for fasteners Ø Price per Package
100 pieces contents
620367 SH 12/1000 M 12/1,000 6 - 8 mm • 10
620363 SH 16/1000 M 16/1,000 8 - 10 mm • 10
620402 SH 22/1000 M 22/1,000 12 - 16 mm • 6
Fischer anchor sleeve (sieve sleeve) FIS H K
Approved by the building authorities: Approved in conjunction with Fischer FIS V

injection mortar and Fischer FIS A anchor rods for use in perforated brick. The galva-
nized FIS H L cut by the meter is not included in the approval.
Application: The Fischer FIS H anchor sleeves are used when injecting Fischer injec-
tion mortar into perforated brick.
Properties: The FIS H anchor sleeves prevent the mortar from moving into the
chambers of the perforated masonry. Centering blades (only for the FIS H K plastic
design) on the inside of the sleeve permit the use of different anchor rod diameters
and center them in the sleeve. The metal FIS H L cut by the meter can be individually
customized if need be.
Installation instructions: The sieve sleeve is filled from the anchor base. The mixing
tube is slowly pulled out of the anchor sleeve during dispensing. Please refer to the
information below for the filling quantity.
Note: Fischer FIS H K sieve sleeves are only approved in conjunction with Fischer
injection mortar.
Plastic DG 2173
Item no. Type Hole Ø Borehole for FIS an- Filling Price Package
depth chor rods quantity per 100 contents
(scale on pieces
cartridge)
626851250 FIS-H 12 x 50 K 12 mm 60 mm M6-M8 5 • 50
626851285 FIS-H 12 x 85 K 12 mm 95 mm M6-M8 10 • 50
626851685 FIS-H 16 x 85 K 16 mm 95 mm M 8 - M 10 12 • 50
6268516130 FIS-H 16 x 130 K 16 mm 140 mm M 8 - M 10 15 • 20
626852085 FIS-H 20 x 85 K 20 mm 95 mm M 12 - M 16 15 • 20
6268520130 FIS-H 20 x 130 K 20 mm 140 mm M 12 - M 16 25 • 20
6268520200 FIS-H 20 x 200 K 20 mm 210 mm M 12 - M 16 40 • 20
1 2 3 4 5
Fischer metal internally threaded sleeve
Application: Approved in conjunction with Fischer FIS V injection mortar for connec-
tions in non-cracked concrete, masonry and perforated brick (with sieve sleeves)
M 6 - M 12 and aerated concrete M 6 - M 8.
Properties: In conjunction with Fischer FIS V injection mortar, the Fischer FIS E
internally threaded anchors are used to fasten heavy objects in concrete. Main areas
of application include heavy metal structures.
galvanized 2161
Item no. Type Thread Anchoring Screw-in Suitable for Price Package
depth depth per 100 contents
min./max. pieces
62047648 E11 x 85 M 6 mm M6 85 mm 8 - 60 mm FIS-H 16 x 85 K / • 10
FIS-H 20 x 85 K
62047880 E11 x 85 M 8 mm M8 85 mm 8 - 60 mm FIS-H 16 x 85 K / • 10
FIS-H 20 x 85 K
620471080 E15 x 85 M 10 mm M 10 85 mm 10 - 60 mm FIS-H 20 x 85 K • 10
620471280 E15 x 85 M 12 mm M 12 85 mm 10 - 60 mm FIS-H 20 x 85 K • 10
Fischer insertion tool RA-SDS
Application: The setting tool is used for the simple installation of anchor rods
FIS A, RG M, FHB AS and AL.
DG 2172
620294 • 1

Fischer FIS V 360 S injection mortar for aerated concrete
Approved by the building authorities: Building Standards approval Z-21.3-1824

for aerated concrete M 8 to M 12. Galvanically zinc-plated anchor rods and stainless
steel A4.
Application: The Fischer FIS V injection mortar based on vinyl ester resin is used to
fasten medium-weight to heavy objects in aerated concrete blocks and bricks as well
as in reinforced roof and ceiling slabs made of aerated concrete. The undercut bore-
hole ensures maximum load-bearing capacity thanks to a form fit. The undercut in
the material is created by swiveling the PBB tapered drill in one work step. The cen-
tering sleeve fixes the fastening element in the borehole and also permits overhead
installation as a result. Please refer to the page for the Fischer FIS V 360 S injection
system for further applications and technical information .
Advantages:
- maximum load-bearing capacity due to form fit in undercut aerated concrete
- also approved with customary threaded rods inspected according to 3.1
Note: The Fischer injection system is only permitted in conjunction with FIS-A anchor
rods or anchor rods with factory test 3.1. The anchor rods and sieve sleeves are not
included in the price of the Fischer injection system.
Installation: The boreholes are to be cleaned thoroughly with a blower and cleaning
brush.
2 plungers, item no. 6203531 or 620356 is required for application.
21.8-1783
DG 2134
6203526 560g = 360 cm³ • 1

> +5 °C 90 minutes
Fischer tapered drill bit PBB
DG 2172
Item no. for anchor rods Price per piece Package contents
62741 M 8 - M 10 • 1
1 2 3 4 5
Fischer PBZ centering sleeve
Type: The centering sleeve fixes the threaded rod in place and permits overhead
installations.
DG 2172
Item no. for anchor Price per Package
rods 100 pieces contents
62742 M 8 - M 10 • 10
Centering device
Application: The centering device keeps the anchor rods in position until the mortar
cures. Recommended for overhead installations from the size M 16 onward.
DG 2172
Item no. for anchor Price per Package
rods 100 pieces contents
62677 M 8 - M 10 • 10

Fischer application gun FIS DMS / FIS AM
Application: For dispensing Fischer mortar injection cartridges FIS V 360

and FIS HB 345.
DG 2172
contents
6203531 FIS DMS (pro) • 1
620356 FIS AM • 1
(standard)
Fischer battery-powered application gun FIS DC 4000 S
Application: For applying from mortar cartridges up to 360 ml.

Properties: Battery driven, automatic return, release of tension after every
interruption in work, no dripping, charger with
integrated filling display, charging time of
60 minutes. Battery charge is enough for 15
360 ml cartridges.
Scope of supply: FIS DC 4000 S battery-powered application
gun with charger and battery pack in a plastic carrying case.
DG 2172
contents
628601 in a case with • 1
2 battery packs
and a charger
Fischer DC battery pack
DG 2172
contents
628603 DC • 1
Fischer pneumatic application gun
Application: For dispensing mortar cartridges up to 360 ml / 950 ml

(recommended working pressure of 6 bar).
DG 2172
contents
6203522 FIS AP for 360 ml • 1
cartridges
Fischer fill & fix injection dowel
Application: The Fischer fill & fix injection fixing is used to fasten light objects in
concrete and masonry. In particular for problematic building materials such
as masonry with porous microstructures or with low compressive strength.
The injection compound is sprayed directly into the borehole and cures
quickly. Screws can be directly screwed into the cured mortar.
Properties: On a polyurethane basis. The compound foams slightly
during curing. A maximum hold in cavities is ensured by this increase in
volume.
fill & fix can also be used as a repair paste for wooden building materials or torn-out
boreholes. The quantity of mortar is enough for approx. 4 boreholes 10x50 mm.
Scope of supply: 1 cartridge with dispensing stopper (can be used without gun),
2 static mixer, 4 anchor sleeves and 2 extensions.
Advantages:
- suitable for all materials
- increase in volume during curing ensures maximum hold in cavities
- also as repair paste for all wooden materials
DG 2131
Item no. Contents Price per piece Package
contents
6270525 25 ml • 1
1 2 3 4
1 2 3 4

MKT composite anchor cartridge V-P

steel, hot-dip galvanized, stainless steel A4 and HCR 1.4529.
Application: In conjunction with MKT V-A composite anchor rods, the MKT V-P
composite anchor cartridges are used to fasten heavy objects in concrete. Main
areas of application include heavy metal structures, facade substructures, noise
Properties: The MKT V-P composite anchor cartridges are 2-component synthetic
resin mortars based on vinyl ester resin that cure quickly after mixing. The curing time
is temperature-sensitive. Tension-free anchorage with small axial and edge spacing.
Can also be used in wet, boreholes that are not filled with water.
Installation instructions: Clean the boreholes thoroughly and insert the anchor
rods with a rotating and hammering machine. Installation only permitted with torque
wrench.
Advantages:
- fastening without expansion pressure permits small axial and edge spacing
- mortar extensively bonds the threaded rods and seals the borehole against weather
effects
Note: MKT V-P composite anchor cartridges are only approved in conjunction with
MKT V-A composite anchor rods. The anchor rods are not included in the price of the Europäische Technische Zulassung -
Option 8 ungerissener Beton
cartridges. ETA - 05/0231
DG 2137
Item no. Type Thread Drill Ø Anchoring Price per Package
620528 VP 8 M8 10 mm 80 mm • 10
6205210 VP 10 M 10 12 mm 90 mm • 10
6205212 VP 12 M 12 14 mm 110 mm • 10
6205216 VP 16 M 16 18 mm 125 mm • 10
6205220 VP 20 M 20 25 mm 170 mm • 10
Temperature in the borehole Curing times for dry concrete Curing times for damp concrete
-5 °C 300 minutes 600 minutes
0 °C 300 minutes 600 minutes
+5 °C 60 minutes 120 minutes
MKT composite anchor rod V-A

non-cracked concrete M 8 to M 24, approval no. ETA-05/0231 for galvanically
zinc-plated steel, hot-dip galvanized, stainless steel A4 and HCR 1.4529.
Application: For fastening heavy objects in concrete in conjunction with MKT V-P
composite anchor cartridges.
Properties: The MKT V-P composite anchor cartridges are 2-component synthetic
resin mortars based on vinyl ester resin that cure quickly after mixing. The curing time
is temperature-sensitive. Tension-free anchorage with small axial and edge spacing.
Can also be used in wet, boreholes that are not filled with water.
Installation instructions: Clean the boreholes thoroughly and insert the anchor
rods with a rotating and hammering machine. Installation only permitted with torque
wrench.
Advantages:
- fastening without expansion pressure permits small axial and edge spacing
- mortar extensively bonds the threaded rods and seals the borehole against weather
effects
Note: MKT V-A composite anchor rods are only approved in conjunction with MKT
V-P composite anchor cartridges. The cartridges are not included in the price of the
anchor rods. A setting tool comes with every pack.
ETA - 05/0231
galvanized DG 2148
Item no. Type Thread Overall Clamping Minimum Price Package
length range anchoring per 100 contents
depth pieces
620538110 VA 8-20/110 M8 110 mm 20 mm 80 mm • 10
6205310130 VA 10-30/130 M 10 130 mm 30 mm 90 mm • 10
6205310165 VA 10-65/165 M 10 165 mm 65 mm 90 mm • 10
6205312160 VA 12-35/160 M 12 160 mm 35 mm 110 mm • 10
6205312210 VA 12-85/210 M 12 210 mm 85 mm 110 mm • 10
6205312220 VA 12-95/220 M 12 220 mm 95 mm 110 mm • 10
6205312250 VA 12-125/250 M 12 250 mm 125 mm 110 mm • 10
6205312300 VA 12-175/300 M 12 300 mm 175 mm 110 mm • 10
6205316165 V-A16-20/165 M 16 165 mm 20 mm 125 mm • 10
6205316190 VA 16-45/190 M 16 190 mm 45 mm 125 mm • 10
6205316250 VA 16-105/250 M 16 250 mm 105 mm 125 mm • 10
6205316300 VA 16-155/300 M 16 300 mm 155 mm 125 mm • 10
6205320220 VA 20-20/220 M 20 220 mm 20 mm 170 mm • 10
6205320260 VA 20-60/260 M 20 260 mm 60 mm 170 mm • 10
6205320300 VA 20-100/300 M 20 300 mm 100 mm 170 mm • 10
1 2 3 4
5 6

Continuation of MKT composite anchor rod V-A

ETA - 05/0231

Item no. Type Thread Overall Clamping Minimum Price Package
length range anchoring per 100 contents
depth pieces
620548110 V-A 8-20/140 A4 M8 110 mm 20 mm 80 mm • 10
6205410130 V-A 10-30/130 A4 M 10 130 mm 30 mm 90 mm • 10
6205412160 V-A 12-35/160 A4 M 12 160 mm 35 mm 110 mm • 10
6205412220 V-A 12-95/220 A4 M 12 220 mm 95 mm 110 mm • 10
6205412300 V-A 12-175/300 A4 M 12 300 mm 175 mm 110 mm • 10
6205416165 V-A 16-20/165 A4 M 16 165 mm 20 mm 125 mm • 10
6205416190 V-A 16-45/190 A4 M 16 190 mm 45 mm 125 mm • 10
6205416250 V-A 16-105/250 A4 M 16 250 mm 105 mm 125 mm • 10
6205416300 V-A 16-155/300 A4 M 16 300 mm 155 mm 125 mm • 10
6205420260 V-A 20-60/260 A4 M 20 260 mm 60 mm 170 mm • 10
Temperature(°C) in the borehole Curing time for dry concrete Curing time for damp concrete
-5 °C 5 hours 10 hours
0 °C 5 hours 10 hours
+5 °C 1 hour 2 hours
+10 °C 1 hour 2 hours
+35°C 10 minutes 20 minutes
Cartridge temperature during processing at least +5 °C
i Loads for MKT V composite anchor galv. zinc-plated / stainless steel A4

Permissible loads1) of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C20/25 (~B25) the load is simultaneously
reduced
Type Material effective mini- max. per per necessary edge spacing (at necessary axial min. axial min. edge
anchoring mum installation missible missible an edge) for max. load spacing for spacing spacing
ponent load load
thick-
ness
[mm] c
[mm]
V-A M8 gzp (5.8) 5.1 65
80 110 10 7.9 120 240 40 40
A4 6.0 75
V-A M10 gzp (5.8) 8.0 90
90 120 20 11.9 90 180 45 45
A4 9.2 110
V-A M12 gzp (5.8) 12.0 125
110 140 40 15.9 110 220 55 55
A4 13.3 145
V-A M16 gzp (5.8) 22.3 230
125 160 80 19.8 125 250 65 65
A4 25.2 265
V-A M20 gzp (5.8) 34.9 290
170 220 120 29.8 170 340 85 85
A4 39.4 335
a lever arm (bending) as well as for reduced edge and axial spacing (dowel groups). ) The specified loads are valid for anchorings in dry and damp concrete for
temperatures in the anchoring base up to +50 °C (or in the short-term to +80 °C) and borehole cleaning according to the approval.
MKT VMZ injection mortar for cracked concrete

Application: In conjunction with the VMZ-A anchor rods, the MKT VMZ injection
mortar is used to fasten heavy objects in cracked concrete. Main areas of application
include metal structures, facade substructures, noise barriers, bridge railings accord-
ing to GEL 14, baluster attachment according to GEL 33 and much more.
Properties: The MKT injection system VMZ comprises an anchor rod with tapered
expansion elements and a 2-component injection mortar. This combination brings
together the advantages of composite dowels and expansion dowels in an approved
fastening system for cracked and non-cracked concrete and ensures small axial and
edge spacing. Push-through installation is possible starting from M 10. Undiminished
load carrying capacity in wet and, from M 12 onward, in water filled boreholes.
and brush. Installation only permitted with torque wrench. The two resin and harden-
er components are first mixed when they leave the cartridge. In this way, the remain-
ing content of the cartridge continues to function. It is only necessary to screw on
a new mixing tube after long interruptions.
Advantages:
Note: The MKT injection mortar is only approved in conjunction with VMZ-A anchor
rods. The anchor rods are not included in the price of the injection mortar. Every
cartridge comes with one mixing tube.
DG 2136
62670345 VMZ 345 345 ml • 1
Every cartridge comes with a mixing tube.
1 2 3 4 5

MKT VMZ injection system anchor rod

Application: In conjunction with the MKT VMZ injection mortar, the MKT VMZ-A
anchor rods are used to fasten heavy objects in cracked concrete. Main areas of
application include metal structures, facade substructures, noise barriers, bridge rail-
ings according to GEL 14, baluster attachment according to GEL 33 and much more.
Properties: The MKT injection system VMZ comprises an anchor rod with tapered
expansion elements and a 2-component injection mortar. This combination brings
together the advantages of composite dowels and expansion dowels in an approved
fastening system for cracked and non-cracked concrete and ensures small axial and
edge spacing. Push-through installation is possible starting from M 10. Undiminished
load carrying capacity in wet and, from M 12 onward, in water filled boreholes.
Installation instructions: The boreholes are to be cleaned thoroughly. Installation
only permitted with torque wrench.
Advantages:
Note: The MKT VMZ-A anchor rods are only approved in conjunction with MKT VMZ
injection mortar. The injection mortars are not included in the price of the anchor rods.
galvanized DG 2147
Item no. Type Thread Ø max. Hole Ø Borehole Price Package
clamping depth per 100 contents
range pieces
62671815 VMZ-A 50 M 8-15/80 M8 15 mm 10 mm 55 mm • 10
62671845 VMZ-A 50 M 8-45/110 M8 45 mm 10 mm 55 mm • 10
626711010 VMZ-A 60 M 10-10/85 M 10 10 mm 12 mm 65 mm • 10
626711020 VMZ-A 60 M 10-20/95 M 10 20 mm 12 mm 65 mm • 10
626711210 VMZ-A 80 M 12-10/110 M 12 10 mm 14 mm 85 mm • 10
626711225 VMZ-A 80 M 12-25/125 M 12 25 mm 14 mm 85 mm • 10
626711250 VMZ-A 80 M 12-50/150 M 12 50 mm 14 mm 85 mm • 10
6267112100 VMZ-A 80 M 12-100/200 M 12 100 mm 14 mm 85 mm • 10
6267112251 VMZ-A 100 M 12-25/145 M 12 25 mm 14 mm 105 mm • 10
6267112601 VMZ-A 100 M 12-60/180 M 12 60 mm 14 mm 105 mm • 10
62671121001 VMZ-A 100 M 12-100/220 M 12 100 mm 14 mm 105 mm • 10
626711630160 VMZ-A 105 M 16-30/160 M 16 30 mm 18 mm 113 mm • 10
626711630 VMZ-A 125 M 16-30/180 M 16 30 mm 18 mm 133 mm • 10
626711660 VMZ-A 125 M 16-60/210 M 16 60 mm 18 mm 133 mm • 10
6267116100 VMZ-A 125 M 16-100/250 M 16 100 mm 18 mm 133 mm • 10
626712050 VMZ-A 170 M 20-50/255 M 20 50 mm 24 mm 180 mm • 5
6267120100 VMZ-A 170 M 20-100/305 M 20 100 mm 24 mm 180 mm • 5
626712450 VMZ-A 200 M 24-50/290 M 24 50 mm 26 mm 215 mm • 5
6267124100 VMZ-A 200 M 24-100/340 M 24 100 mm 26 mm 215 mm • 5
1 2 3 4 5
Continuation of MKT VMZ injection system anchor rod

Item no. Type Thread Ø max. Hole Ø Borehole Price Package
clamping depth per 100 contents
range pieces
62672815 VMZ-A 50 M 8-15/80 M8 15 mm 10 mm 55 mm • 10
62672845 VMZ-A 50 M 8-45/110 M8 45 mm 10 mm 55 mm • 10
626721010 VMZ-A 60 M 10-10/85 M 10 10 mm 12 mm 65 mm • 10
626721020 VMZ-A 60 M 10-20/95 M 10 20 mm 12 mm 65 mm • 10
626721020110 VMZ-A 75 M 10-20/110 M 10 20 mm 12 mm 80 mm • 10
626721040 VMZ-A 75 M 10-40/130 M 10 40 mm 12 mm 80 mm • 10
626721225115 VMZ-A 70 M 12-25/115 M 12 25 mm 14 mm 75 mm • 10
626721210 VMZ-A 80 M 12-10/110 M 12 10 mm 14 mm 85 mm • 10
626721225 VMZ-A 80 M 12-25/125 M 12 25 mm 14 mm 85 mm • 10
626721250 VMZ-A 80 M 12-50/150 M 12 50 mm 14 mm 85 mm • 10
6267212100 VMZ-A 80 M 12-100/200 M 12 100 mm 14 mm 85 mm • 10
6267212251 VMZ-A 100 M 12-25/145 M 12 25 mm 14 mm 105 mm • 10
6267212601 VMZ-A 100 M 12-60/180 M 12 60 mm 14 mm 105 mm • 10
62672121001 VMZ-A 100 M 12-100/220 M 12 100 mm 14 mm 105 mm • 10
626721630145 VMZ-A 90 M 16-30/145 M 16 30 mm 18 mm 98 mm • 10
626721630160 VMZ-A 105 M 16-30/160 M 12 30 mm 18 mm 113 mm • 10
626721630 VMZ-A 125 M 16-30/180 M 16 30 mm 18 mm 133 mm • 10
626721660 VMZ-A 125 M 16-60/210 M 16 60 mm 18 mm 133 mm • 10
6267216100 VMZ-A 125 M 16-100/250 M 16 100 mm 18 mm 133 mm • 10
626722050 VMZ-A 170 M 20-50/255 M 20 50 mm 24 mm 180 mm • 5
6267220100 VMZ-A 170 M 20-100/305 M 20 100 mm 24 mm 180 mm • 5
626722450 VMZ-A 200 M 24-50/290 M 24 50 mm 26 mm 215 mm • 5
6267224100 VMZ-A 200 M 24-100/340 M 24 100 mm 26 mm 215 mm • 5
Temperature (°C) Curing time for

Processing time Curing time for dry concrete
in the borehole damp concrete
-5 °C 1.30 hours 6 hours 12 hours
-4 °C to -1 °C 45 minutes 6 hours 12 hours
0 °C to +4 °C 20 minutes 3 hours 6 hours
+5 °C to +9 °C 12 minutes 2 hours 4 hours
+10 °C to +19 °C 6 minutes 1.20 hours 2.40 hours
+20 °C to +29 °C 4 minutes 45 minutes 1.30 hours
+30 °C to +34 °C 2 minutes 25 minutes 50 minutes
+35 °C to +39 °C 1.4 minutes 20 minutes 40 minutes
+40 °C 1.4 minutes 15 minutes 30 minutes
Cartridge temperature during processing at least +5 °C

i Loads for MKT VMZ injection system galv. zinc-plated / stainless steel A4
reduced
Type Material effective mini- max. per per necessary edge spacing necessary axial min. axial min. edge
anchoring mum installation missible missible (at an edge) for max. load spacing for spacing spacing
ponent load load
thick-
ness
hef hmin Tinst Nperm2) 4) Vperm2) 4) Tensile load Transverse scr smin cmin
[mm] c
[mm]
VMZ-A gzp 8.0 195
50 80 10 6.1 75 150 40 40
50 M8 A4 8.6 210
VMZ-A gzp 12.0 260
60 100 15 8.0 90 180 40 40
60 M10 A4 13.1 285
VMZ-A
A4 75 110 15 11.1 13.1 112.5 265 225 40 40
75 M10
VMZ-A
A4 70 110 25 10.0 19.4 105 405 210 55 55
70 M12
VMZ-A gzp
80 110 25 12.3 19.4 120 400 240 40 50
80 M12 A4
VMZ-A gzp 19.4
100 130 30 17.1 150 350 300 50 50
100 M12 A4
VMZ-A
A4 90 130 50 14.6 29.3 135 550 270 50 50
90 M16
VMZ-A gzp 36.0
105 150 50 18.4 157.5 630 315 50 50
105 M16 A4
VMZ-A gzp 36.0
125 170 50 24.0 187.5 575 375 60 60
125 M16 A4
VMZ-A gzp 76.0 1050
170 230 80 38.0 255 510 80 80
170 M20 A4 74.9 1030
VMZ-A gzp 97.0 1220
200 270 120 48.5 300 600 80 80
200 M24 A4 89.1 1110
4) The specified loads are valid for anchorings in dry and damp concrete for temperatures in the anchoring base up to +50 °C (or in the short-term to +80 °C) and
MKT Express injection mortar VMU 345
For the cold months. 50% more rapid curing.

steel, stainless steel A4 and HCR 1.4529. Building Standards approval Z-21.3-1803
for solid and perforated masonry M 8 to M 12 (with internally threaded anchor rods
also in M 6 + M 8).
Application: The MKT VMU Express injection mortar based on vinyl ester resin is
used to fasten medium-weight to heavy objects in masonry, solid and perforated
brick, lime sand, solid and perforated masonry as well as in non-cracked concrete.
Main areas of application include heavy metal structures of all kinds, facade sub-
structures, machinery, devices and much more. The two resin and hardener compo-
nents are first mixed when they leave the cartridge. In this way, the remaining content
of the cartridge continues to function. It is only necessary to screw on a new mixing
tube after long interruptions.
Properties: Very rapid curing and load-bearing capacity. Ideal for the colder months.
Free of expansion pressure, for small axial and edge spacing.
and cleaning brush.
Advantages:
- 50% faster curing and load-bearing capacity
- hardly any limitations at cold temperatures
-a lso approved for the use of customary threaded rods according to DIN 975 with
factory test 3.1
Note: Cartridges that were briefly stored below 0 °C can be brought back to a mini-
mum temperature of +5 °C by means of suitable measures without a loss of function.
For temperatures greater than +5 °C it is absolutely necessary to note the signifi-
cantly reduced processing times. Every cartridge comes with one mixing tube. The
MKT VMU express injection mortar is only permitted in conjunction with VMU and
V-A anchor rods, threaded rods with factory test 3.1 and when used in perforated
masonry with VMU-SH sieve sleeves. Offset VMU-AH anchor rods are only approved
for use in VMU-SH sieve sleeves in perforated masonry. The anchor rods and sieve
sleeves are not included in the price of the mortar cartridges.
For proper and compliant installation, cleaning tools, special application guns, mixing
tubes and, depending on the substrate, sieve sleeves are necessary.
DG 2136
62886345 VMU Express 345 ml • 1
Borehole filling quantity per cartridge 345 ml Temperature Processing Curing times in dry/wet
in solid brick without sieve sleeve in the time concrete
M8 M 10 M 12 M 16 borehole
approx. boreholes 58 41 28 17 -15 °C 150 minutes 24 hours / 48 hours
-10 °C 120 minutes 10 hours / 20 hours
Boreholes filling quantity per cartridge 345 ml -5 °C 40 minutes 4 hours / 8 hours
in perforated brick with sieve sleeve 0 °C 20 minutes 2 hours / 4 hours
M8 M 10 M 12 +5 °C 10 minutes 60 minutes / 120 minutes
approx. boreholes 20 14 14 +10 °C 6 minutes 40 minutes / 80 minutes
+20 °C 3 minutes 20 minutes / 40 minutes
+30 °C 1 minutes 10 minutes / 20 minutes
1 2 3 4 5 6
1 2 3 4 5 6

Insertion tools for anchor rod to composite anchor
Type: For smoothly cut off anchor rods without insertion aid, e.g. special lengths.
DG 2172
Item no. for anchor rods Price per piece Package
contents
620298 M8 • 1
6202910 M 10 • 1
6202912 M 12 • 1
6202914 M 14 • 1
6202916 M 16 • 1
6202920 M 20 • 1
6202924 M 24 • 1
6202930 M 30 • 1
MKT application gun
Application: For applying injection mortar cartridges up to 345 ml.
DG 2172
620354 • 1
MKT application gun VMP 300
Application: For dispensing from sealant and adhesive cartridges up to 310 ml. as

well as for coaxial injection mortar cartridges up to 300 ml.
Properties: Very powerful metal design with open half-shell.
DG 2172
620355 • 1
Toge asphalt fastener - injection mortar ATA 2004C
Application: The Toge ATA 2004C injection mortar is used for anchoring in asphalt.
Main application areas are traffic guidance systems, restraint systems, impact
protection systems, speed bumps, sidewalk covers, barriers, shelving systems,
post securing and much more.
Properties: Anchoring without expansion pressure in non-pressure-resistant mate-
rial. Fastening on the surface with TSM-A internally threaded sleeves protect vehicle
tires when driving over guards.
Installation instructions: Clean boreholes thoroughly.
Advantage:
- tested system for fastening fixtures in non-pressure-resistant, soft materials
Note: Every cartridge comes with one mixing tube. The internally threaded sleeves
are not included in the price of the injection mortar.
DG 2130
contents
62850385 385 ml • 1
1 2 3 4 5
Mixing tube for ATA 2004C composite mortar
Application: The mixing tube serves as a nozzle for the injection mortar.
The mixing tube must be replaced in the event of long work interruptions.
DG 2170
628511 • 1

Internally threaded sleeves TSM-A galvanized
Application: The internally threaded sleeves TSM-A are used for fastening fixtures
in asphalt in conjunction with the Toge ATA 2004 C injection mortar. In favor of easy
removability, these internally threaded sleeves can also be inserted into the asphalt
without injection mortar for temporary attachments.
However, approx. 1/3 load reduction must be taken into account.
Properties: Thanks to flush installation, these internally threaded sleeves are out-
standingly suited for fastening fixtures to traffic routes because the anchor can be
driven over without harming vehicle tires.
Advantage:
- anchoring without expansion and installation on the surface possible
Note: Galvanically zinc-plated sleeves are sufficient for interior applications or for
temporary exterior attachments. The internally threaded sleeves coated with TOGE-
KORR for permanent attachments in the open. The injection mortar is not included
in the price of the internally threaded sleeves.
DG 2160
Item no. Type Hole Ø Borehole Internal Screw-in Strokes Price Package
depth thread depth from the per 100 contents
press pieces
6285216100 TSM-A 16x100 16 mm 105 - 110 mm M 10 10 / 25 mm 1 • 50
6285222100 TSM-A 22x100 22 mm 105 - 110 mm M 16 16 / 30 mm 1-2 • 50
6285222155 TSM-A 22x155 22 mm 155 - 160 mm M 16 16 / 30 mm 2-3 • 40
An anchor rod with M 24 x 220 external thread can also be delivered at short notice upon request.
Reducer for TSM-A internally threaded sleeves
Application: For reducing the thread sizes of the TSM-A internally threaded sleeves.
DG 2170
Item no. reduced from Price per piece Package contents
628514 M 16 - M 10 • 25
628515 M 16 - M 12 • 1
Insertion tool for TSM-A internally threaded sleeves
Application: For driving TSM-A internally threaded sleeves for Toge asphalt fastener.
DG 2170
628513 • 1
Application gun for ATA 2004 C composite mortar
Application: For applying TOGE injection mortar asphalt

fastener.

628512 • 1
Fischer long-shaft dowel SXR-T with countersunk head screw
Approved by the building authorities: European Technical Approval, approval

no. ETA-07/0121 for masonry, hollow brick, sand-lime brick, aerated concrete and in
concrete for redundant (multi-) fasteners. For galvanically zinc-plated steel and stain-
less steel A4. Building Standards Approval Z-21.2-1862 for facade fasteners with
stainless steel screws and, in special cases (see approval section 1.2), with galva-
nized screws.
Application: The Fischer SXR long shaft dowels are used to fasten light to medium-
weight objects in concrete, masonry and aerated concrete. Main application areas
include substructures of wall and facade paneling, wood and metal structures as well
as ceiling suspensions, cable lines and much more, thanks to the option of redun-
dant fastening.
Properties: Material nylon, halogen-free. Very low anchoring depth.
Integrated knock-in lock prevents premature expanding. Complete with per-installed
countersunk screws. Screw drive: TX30 for SXR-T 8 and TX40 for SXR-T 10.
Advantages:
- cost and time savings thanks to uniquely low anchoring depth
- pre-installed screws save a work step
- variable use thanks to additional redundant approval
Note: Dowels are only permitted in conjunction with the included Fischer safety
screws.
For anchoring in aerated concrete with PP2, PB 2 and P3.3 quality, the holes cannot
be drilled, but must be struck with aerated concrete plungers.
Higher-strength aerated concrete blocks must be drilled using a rotary drill.
galvanized DG 2084
Item no. Type Dowel Ø x Clamping Anchoring Price per Package
length range, max. depth 100 pieces contents
62750860 SXR 8 x 60 T 8 x 60 mm 10 mm 50 mm • 50
62750880 SXR 8 x 80 T 8 x 80 mm 30 mm 50 mm • 50
627508100 SXR 8 x 100 T 8 x 100 mm 50 mm 50 mm • 50
627508120 SXR 8 x 120 T 8 x 120 mm 70 mm 50 mm • 50
627501080 SXR 10 x 80 T 10 x 80 mm 30 mm 50 mm • 50
6275010100 SXR 10 x 100 T 10 x 100 mm 50 mm 50 mm • 50
6275010120 SXR 10 x 120 T 10 x 120 mm 70 mm 50 mm • 50
6275010140 SXR 10 x 140 T 10 x 140 mm 90 mm 50 mm • 50
6275010160 SXR 10 x 160 T 10 x 160 mm 110 mm 50 mm • 50
6275010180 SXR 10 x 180 T 10 x 180 mm 130 mm 50 mm • 50
6275010200 SXR 10 x 200 T 10 x 200 mm 150 mm 50 mm • 50
6275010230 SXR 10 x 230 T 10 x 230 mm 180 mm 50 mm • 50
6275010260 SXR 10 x 260 T 10 x 260 mm 210 mm 50 mm • 50

627511080 SXR 10 x 80 T A4 10 x 80 mm 30 mm 50 mm • 50
6275110100 SXR 10 x 100 T A4 10 x 100 mm 50 mm 50 mm • 50
6275110120 SXR 10 x 120 T A4 10 x 120 mm 70 mm 50 mm • 50
6275110140 SXR 10 x 140 T A4 10 x 140 mm 90 mm 50 mm • 50
6275110160 SXR 10 x 160 T A4 10 x 160 mm 110 mm 50 mm • 50
6275110180 SXR 10 x 180 T A4 10 x 180 mm 130 mm 50 mm • 50
6275110200 SXR 10 x 200 T A4 10 x 200 mm 150 mm 50 mm • 50
6275110230 SXR 10 x 230 T A4 10 x 230 mm 180 mm 50 mm • 50
6275110260 SXR 10 x 260 T A4 10 x 260 mm 210 mm 50 mm • 50
1 2 3 4 1 2 3 4

Fischer long-shaft dowel SXR 10-FUS with hexagonal bolt

concrete for redundant (multi-) fasteners for galvanically zinc-plated steel and stain-
less steel A4. Building Standards Approval Z-21.2-1862 for facade fasteners with
stainless steel screws and, in special cases (see approval section 1.2), with galva-
nized screws.
Application: The Fischer SXR long shaft dowels are used to fasten light to medium-
dant fastening.
Properties: Material nylon, halogen-free. Very low anchoring depth.
Integrated knock-in lock prevents premature expanding. Complete with pre-installed
hexagonal bolts and pressed-on washer. Screw drive: WAF 13.
Advantages:
- cost and time savings thanks to uniquely low anchoring depth
- save a work step thanks to pre-installed screws
Note: Dowels are only permitted in conjunction with the included Fischer safety
screws.
For anchoring in aerated concrete with PP2, PB 2 and P3.3 quality, the holes cannot
be drilled, but must be struck with aerated concrete plungers.
Higher-strength aerated concrete blocks must be drilled using a rotary drill.
galvanized DG 2084
627521060 SXR 10 x 60 FUS 10 x 60 mm 10 mm 50 mm • 50
627521080 SXR 10 x 80 FUS 10 x 80 mm 30 mm 50 mm • 50
6275210100 SXR 10 x 100 FUS 10 x 100 mm 50 mm 50 mm • 50
6275210120 SXR 10 x 120 FUS 10 x 120 mm 70 mm 50 mm • 50
6275210140 SXR 10 x 140 FUS 10 x 140 mm 90 mm 50 mm • 50
6275210160 SXR 10 x 160 FUS 10 x 160 mm 110 mm 50 mm • 50
6275210180 SXR 10 x 180 FUS 10 x 180 mm 130 mm 50 mm • 50
6275210200 SXR 10 x 200 FUS 10 x 200 mm 150 mm 50 mm • 50
6275210230 SXR 10 x 230 FUS 10 x 230 mm 180 mm 50 mm • 50
6275210260 SXR 10 x 260 FUS 10 x 260 mm 210 mm 50 mm • 50

627531060 SXR 10 x 60 FUS A4 10 x 60 mm 10 mm 50 mm • 50
6275310120 SXR 10 x 120 FUS 10 x 120 mm 70 mm 50 mm • 50
A4
6275310140 SXR 10 x 140 FUS 10 x 140 mm 90 mm 50 mm • 50
A4
6275310160 SXR 10 x 160 FUS 10 x 160 mm 110 mm 50 mm • 50
A4
6275310180 SXR 10 x 180 FUS 10 x 180 mm 130 mm 50 mm • 50
A4
1 2 3 4 1 2 3 4
Fischer SXRL-T long-shaft dowel with countersunk head screw

no. ETA-07/0121 for masonry, hollow brick, sand-lime brick, aerated concrete and
in concrete for redundant (multi-) fasteners. For galvanically zinc-plated steel and
stainless steel A4.
Application: The Fischer SXRL-T long shaft dowels are used to fix light to medium-
dant fastening.
Properties: Material nylon, halogen-free. Complete with pre-installed countersunk
screws. Screw drive: TX40
Advantages:
- variable setting depths in aerated concrete 70 mm or 90 mm
- can be delivered by 220 mm
galvanized DG 2084
Item no. Type Dimension Max. clamp- Max. clamp- Price per Package
ing range at ing range at 100 pieces contents
anchoring anchoring
depth depth
70 mm 90 mm
627541080 SXRL 10 x 80 T 10 x 80 T 10 mm - mm • 50
6275410100 SXRL 10 x 100 T 10 x 100 T 30 mm 10 mm • 50
6275410120 SXRL 10 x 120 T 10 x 120 T 50 mm 30 mm • 50
6275410140 SXRL 10 x 140 T 10 x 140 T 70 mm 50 mm • 50
6275410160 SXRL 10 x 160 T 10 x 160 T 90 mm 70 mm • 50
6275410180 SXRL 10 x 180 T 10 x 180 T 110 mm 90 mm • 50
6275410200 SXRL 10 x 200 T 10 x 200 T 130 mm 110 mm • 50
6275410230 SXRL 10 x 230 T 10 x 230 T 160 mm 140 mm • 50
6275410260 SXRL 10 x 260 T 10 x 260 T 190 mm 170 mm • 50
6275410290 SXRL 10 x 290 T 10 x 290 T 220 mm 200 mm • 50

Item no. Type Dimension Max. clamp- Max. clamp- Price per Package
ing range at ing range at 100 pieces contents
anchoring anchoring
depth depth
70 mm 90 mm
6275411080 SXRL 10 x 80 T A4 10 x 80 T A4 10 mm - mm • 50
62754110100 SXRL 10 x 100 T A4 10 x 100 T A4 30 mm 10 mm • 50
62754110120 SXRL 10 x 120 T A4 10 x 120 T A4 50 mm 30 mm • 50
62754110140 SXRL 10 x 140 T A4 10 x 140 T A4 70 mm 50 mm • 50
62754110160 SXRL 10 x 160 T A4 10 x 160 T A4 90 mm 70 mm • 50
62754110180 SXRL 10 x 180 T A4 10 x 180 T A4 110 mm 90 mm • 50
62754110200 SXRL 10 x 200 T A4 10 x 200 T A4 130 mm 110 mm • 50
62754110230 SXRL 10 x 230 T A4 10 x 230 T A4 160 mm 140 mm • 50
62754110260 SXRL 10 x 260 T A4 10 x 260 T A4 190 mm 170 mm • 50
62754110290 SXRL 10 x 290 T A4 10 x 290 T A4 220 mm 200 mm • 50

Fischer long-shaft dowel SXRL-FUS with hexagonal bolt

less steel A4.
Application: The Fischer SXRL-FUS long shaft dowels are used to fasten light to
medium-weight objects in concrete, masonry and aerated concrete. Main application
areas include substructures of wall and facade paneling, wood and metal structures
as well as ceiling suspensions, cable lines and much more, thanks to the option of
redundant fastening.
Properties: Material nylon, halogen-free. Complete with pre-installed hexagonal
bolts. Screw drive: TX40/WAF 13
Advantages:
galvanized DG 2084
Item no. Type Dimension Max. Max. Price per Package
clamping clamping 100 pieces contents
range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
6275421080 SXRL 10 x 80 FUS 10 x 80 FUS 10 mm - mm • 50
62754210100 SXRL 10 x 100 FUS 10 x 100 FUS 30 mm 10 mm • 50

range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
6275431080 SXRL 10 x 80 FUS A4 10 x 80 FUS A4 10 mm - mm • 50
62754310100 SXRL 10 x 100 FUS A4 10 x 100 FUS A4 30 mm 10 mm • 50
Fischer SXRL-T long-shaft dowel with countersunk head screw

less steel A4.
Application: The Fischer SXRL-T long shaft dowels are used to fix light to medium-
dant fastening.
Properties:
Material nylon, halogen-free. Complete with pre-installed countersunk screws.
Screw drive: TX40
Advantages:
galvanized DG 2084
range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
627541080 SXRL 10 x 80 T 10 x 80 T 10 mm • 50
6275410100 SXRL 10 x 100 T 10 x 100 T 30 mm 10 mm • 50
6275410120 SXRL 10 x 120 T 10 x 120 T 50 mm 30 mm • 50
6275410140 SXRL 10 x 140 T 10 x 140 T 70 mm 50 mm • 50
6275410160 SXRL 10 x 160 T 10 x 160 T 90 mm 70 mm • 50
6275410180 SXRL 10 x 180 T 10 x 180 T 110 mm 90 mm • 50
6275410200 SXRL 10 x 200 T 10 x 200 T 130 mm 110 mm • 50
6275410230 SXRL 10 x 230 T 10 x 230 T 160 mm 140 mm • 50
6275410260 SXRL 10 x 260 T 10 x 260 T 190 mm 170 mm • 50
6275410290 SXRL 10 x 290 T 10 x 290 T 220 mm 200 mm • 50

range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
6275411080 SXRL 10 x 80 T A4 10 x 80 T A4 10 mm • 50
62754110100 SXRL 10 x 100 T A4 10 x 100 T A4 30 mm 10 mm • 50
62754110120 SXRL 10 x 120 T A4 10 x 120 T A4 50 mm 30 mm • 50
62754110140 SXRL 10 x 140 T A4 10 x 140 T A4 70 mm 50 mm • 50
62754110160 SXRL 10 x 160 T A4 10 x 160 T A4 90 mm 70 mm • 50
62754110180 SXRL 10 x 180 T A4 10 x 180 T A4 110 mm 90 mm • 50
62754110200 SXRL 10 x 200 T A4 10 x 200 T A4 130 mm 110 mm • 50
62754110230 SXRL 10 x 230 T A4 10 x 230 T A4 160 mm 140 mm • 50
62754110260 SXRL 10 x 260 T A4 10 x 260 T A4 190 mm 170 mm • 50
62754110290 SXRL 10 x 290 T A4 10 x 290 T A4 220 mm 200 mm • 50

Fischer long-shaft dowel SXRL-FUS with hexagonal bolt

less steel A4.
Application: The Fischer SXRL-FUS long shaft dowels are used to fasten light to
medium-weight objects in concrete, masonry and aerated concrete. Main application
areas include substructures of wall and facade paneling, wood and metal structures
as well as ceiling suspensions, cable lines and much more, thanks to the option of
redundant fastening.
Properties:
Material nylon, halogen-free. Complete with pre-installed hexagonal bolts.
Screw drive: TX40/WAF 13
Advantages:
galvanized DG 2084
range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
6275421080 SXRL 10 x 80 FUS 10 x 80 FUS 10 mm • 50

range at range at
anchor- anchor-
ing depth ing depth
70 mm 90 mm
6275431080 SXRL 10 x 80 FUS A4 10 x 80 FUS A4 10 mm • 50
i Loads for SXR long shaft dowels
Highest permissible loads of a single dowel in masonry
Masonry Europ. approval (ETA)10)

German approval for
for multi-fasteners of non-structural
the fixing of facades
systems (redundant)
Ø 8 mm Ø 10 mm Ø 8 mm Ø 10 mm
Solid brick ≥ Mz 12 [kN] 0.40 / 0.501) 0.60 / 0.801) 0.57 0.40 / 0.802)
Solid brick ≥ Mz 20 [kN] 0.40 / 0.501) 0.60 / 0.801) 0.70 0.57 / 1.142)
Solid sand-lime brick ≥ KS 12 [kN] 0.40 / 0.501) 0.60 / 0.801) 0.60 0.90
Solid sand-lime brick ≥ KS 20 [kN] 0.40 / 0.501) 0.60 / 0.801) 0.70 1.29
Hollow brick ≥ HLz 12, bulk density ≥ 1.0 kg/dm³ [kN] - 0.30 0.17 0.40
Hollow brick Poroton T14 [kN] - - - 0.09
Porous sand-lime brick ≥ KSL 6 [kN] - 0.40 0.43 0.572)
Porous sand-lime brick ≥ KSL 12 [kN] - 0.40 0.57 0.57
Hollow lightweight concrete blocks ≥ HBl 2 [kN] - 0.25 - 0.43
Solid lightweight concrete bricks ≥ V 2 [kN] 0.15 0.25 0.34 0.34
Solid lightweight concrete bricks ≥ V 6 [kN] 0.15 0.25 0.25 0.70
Aerated concrete PP2 / P3.3 [kN] - 0.203) - 0.143)
Aerated concrete ≥ PP4 / P4.4 [kN] - 0.30 - 0.28
Permissible bending moment Mperm [Nm] 7.1 / 4.99) 10.1 / 9.59) 7.1 / 5.89) 10.1 / 9.59)
Minimum component thickness hmin [mm] 115 100
Single dowel axial spacing a [mm] 100 100 / 2504) 250 250
Axial spacing within dowel group s1 / s2 [mm] 100 100 / 1005) 100 100 / 100 2005) / 4005)
Edge spacing ar / c [mm] 100 / 2508) 100 / 2508) 1007) 1007)
Effective anchoring depth hef [mm] 50 50
The entire Z-21.2-1862 or ETA-07/0121 approval notice is to be observed for the measurement.
All loads relate to a long-term temperature of 50 °C and a short-term temperature of 80 °C. A safety factor of yF = 1.4 was included.
1) solid brick
2) applies to edge spacing c ≥ 200 mm
3) borehole creation by means of plungers
4) for perforated bricks
5) load reduction by 50% for perforated bricks
6) applies to aerated concrete
7) greater spacing necessary partially dependent on masonry
8) without load or tilt indication
9) with A4 screws
10) The block sizes/perforations defined in the ETA are to be observed.
S2
a
S S a
ar
h a ar
a
S1 S

Highest permissible loads of a single dowel as a multi-fastener for facade paneling in normal concrete
Concrete ≥ B15 (C12/15) German approval for the fixing of facades

Ø 8 mm Ø 10 mm
Permissible tensile load-bearing capacity [kN] 0.5 0.80 1.60
Permissible shear load-bearing capacity [kN] 0.5 0.80 1.60
Permissible bending moment Mperm [Nm] 7.1 / 4.91) 10.1 / 9.51)
Single dowel axial spacing a [mm] 100 100 150
Axial spacing in the group ai [mm] 50 50 50
Axial spacing group to group ag [mm] 150 150 300
Edge spacing ar [mm] 50 50 100
Effective anchoring depth hef [mm] 50

1) with A4 screws
d d
a ag
ar ar
a ar ai
a
ai ar
ag

Highest permissible loads of a single dowel as a multi-fastener of non-structural systems in normal concrete
Concrete ≥ B15 (C12/15) Europ. approval (ETA)
for multi-fasteners of non-structural systems (redundant)
Ø 8 mm Ø 10 mm
Permissible tensile load-bearing capacity2) [kN] 1.00 1.79
Permissible shear load-bearing capacity2) [kN] 4.23 / 3.431) 5.37 / 4.981)
Permissible bending moment Mperm [Nm] 7.1 / 5.751) 10.1 / 9.51)
Concrete strength C 12/15 C 16/20 C 12/15 C 16/20
Min. axial spacing amin [mm] 70 50 703) 503)
Char. edge spacing ccr,N [mm] 70 50 140 100
The entire ETA-07/0121 approval notice is to be observed for the measurement.

All loads relate to a long-term temperature of 50 °C and a short-term temperature of 80 °C.
A safety factor of yF = 1.4 was included.
1) with A4 screws
2) Max. permissible load per single dowel without edge influence with yF = 1.4 (for additional conditions for groups and limits, see the approval)
3) Minimum edge spacing with simultaneous increase of ccr,N. See approval for dimensions.
S2
S S
S1 S
Fischer frame dowels FUR-T with countersunk screw
Approved by the building authorities: Building Standards Approval, approval

no. Z-21.2-1204 for masonry, hollow brick, sand-lime bricks, aerated concrete
and in concrete for galvanically zinc-plated steel and stainless steel A4.
Application: The Fischer FUR frame dowels are used to fasten light to medium-
weight objects in concrete, solid brick, hollow brick and sand-lime bricks. Main areas
of application include substructures of wall and facade paneling, wood and metal
structures as well as window and door frames.
Properties: Material: Nylon, halogen-free. Unique lamella technology for high
expansion forces in solid building material or stone base as well as for secure
interlocking in the cavity. Integrated knock-in lock prevents premature expanding.
Complete with pre-installed countersunk head screws. Screw drive: TX30 for
FUR-T 8, TX40 for FUR-T 10 and TX50 for FUR-T 14.
Advantage:
Note: Dowels are only permitted in conjunction with the included Fischer safety screws.
galvanized DG 2084
Item no. Type Dowel Ø x length Clamping Minimum Price per Package
range, max. anchoring 100 pieces contents
depth
6210780 FUR 8/80 T 8 x 80 mm 10 mm 70 mm • 50
62107100 FUR 8/100 T 8 x 100 mm 30 mm 70 mm • 50
62107120 FUR 8/120 T 8 x 120 mm 50 mm 70 mm • 50
6210980 FUR 10/80 T 10 x 80 mm 10 mm 70 mm • 50
62109100 FUR 10/100 T 10 x 100 mm 30 mm 70 mm • 50
62109115 FUR 10/115 T 10 x 115 mm 45 mm 70 mm • 50
62109135 FUR 10/135 T 10 x 135 mm 65 mm 70 mm • 50
62109160 FUR 10/160 T 10 x 160 mm 90 mm 70 mm • 50
62109185 FUR 10/185 T 10 x 185 mm 115 mm 70 mm • 50
62109200 FUR 10/200 T 10 x 200 mm 130 mm 70 mm • 50
62109230 FUR 10/230 T 10 x 230 mm 160 mm 70 mm • 50
62114100 FUR 14/100 T 14 x 100 mm 30 mm 70 mm • 50
62114140 FUR 14/140 T 14 x 140 mm 70 mm 70 mm • 50
62114165 FUR 14/165 T 14 x 165 mm 95 mm 70 mm • 50
62114180 FUR 14/180 T 14 x 180 mm 110 mm 70 mm • 50
62114240 FUR 14/240 T 14 x 240 mm 170 mm 70 mm • 50
62114270 FUR 14/270 T 14 x 270 mm 200 mm 70 mm • 50

depth
62110801 FUR 8/80 T 8 x 80 mm 10 mm 70 mm • 50
6211101001 FUR 8/100 T 8 x 100 mm 30 mm 70 mm • 50
621101201 FUR 8/120 T 8 x 120 mm 50 mm 70 mm • 50
6211080 FUR 10/80 T 10 x 80 mm 10 mm 70 mm • 50
62110100 FUR 10/100 T 10 x 100 mm 30 mm 70 mm • 50
62110115 FUR 10/115 T 10 x 115 mm 45 mm 70 mm • 50
62110135 FUR 10/135 T 10 x 135 mm 65 mm 70 mm • 50
62110160 FUR 10/160 T 10 x 160 mm 90 mm 70 mm • 50
62110185 FUR 10/185 T 10 x 185 mm 115 mm 70 mm • 50
62110200 FUR 10/200 T 10 x 200 mm 130 mm 70 mm • 50
1 2 3 4

Fischer FUR-SS frame dowel with hexagonal bolt

no. Z-21.2-1204 for masonry, hollow brick, sand-lime bricks, aerated concrete and
in concrete for galvanically zinc-plated steel and stainless steel A4.
Application: The Fischer FUR frame dowels are used to fasten light to medium-
weight objects in concrete, solid brick, hollow brick and sand-lime bricks. Main areas
of application include substructures of wall and facade paneling, wood and metal
structures as well as window and door frames.
Properties: Material nylon, halogen-free. Unique lamella technology for high expan-
sion forces in solid building material or stone base as well as for secure interlocking
in the cavity. Integrated knock-in lock prevents premature expanding.
Complete with pre-installed hexagonal bolts. Screw drive: WAF 10 for FUR-SS 8,
WAF 13 for FUR-SS 10 and WAF 17 for FUR-SS 14.
Advantage:
Note: Dowels are only permitted in conjunction with the included Fischer safety screws.
galvanized DG 2084
depth
6210880 FUR 8/80 SS 8 x 80 mm 10 mm 70 mm • 50
62108100 FUR 8/100 SS 8 x 100 mm 30 mm 70 mm • 50
6211180 FUR 10/80 SS 10 x 80 mm 10 mm 70 mm • 50
62111100 FUR 10/100 SS 10 x 100 mm 30 mm 70 mm • 50
62111115 FUR 10/115 SS 10 x 115 mm 45 mm 70 mm • 50
62111135 FUR 10/135 SS 10 x 135 mm 65 mm 70 mm • 50
62111160 FUR 10/160 SS 10 x 160 mm 90 mm 70 mm • 50
62111185 FUR 10/185 SS 10 x 185 mm 115 mm 70 mm • 50
62111200 FUR 10/200 SS 10 x 200 mm 130 mm 70 mm • 50
62111230 FUR 10/230 SS 10 x 230 mm 160 mm 70 mm • 50
62115100 FUR 14/100 F SS 14 x 100 mm 30 mm 70 mm • 50
62115140 FUR 14/140 F SS 14 x 140 mm 70 mm 70 mm • 50
62115165 FUR 14/165 F SS 14 x 165 mm 95 mm 70 mm • 50
62115180 FUR 14/180 F SS 14 x 180 mm 110 mm 70 mm • 50
62115240 FUR 14/240 F SS 14 x 240 mm 170 mm 70 mm • 50
62115270 FUR 14/270 F SS 14 x 270 mm 200 mm 70 mm • 50

depth
62112801 FUR 8/80 SS 8 x 80 mm 10 mm 70 mm • 50
621121001 FUR 8/100 SS 8 x 100 mm 30 mm 70 mm • 50
6211280 FUR 10/80 SS 10 x 80 mm 10 mm 70 mm • 50
62112100 FUR 10/100 SS 10 x 100 mm 30 mm 70 mm • 50
62112115 FUR 10/115 SS 10 x 115 mm 45 mm 70 mm • 50
62112135 FUR 10/135 SS 10 x 135 mm 65 mm 70 mm • 50
62112160 FUR 10/160 SS 10 x 160 mm 90 mm 70 mm • 50
62112200 FUR 10/200 SS 10 x 200 mm 130 mm 70 mm • 50
62112230 FUR 10/230 SS 10 x 230 mm 160 mm 70 mm • 50
1 2 3 4
i Loads for FUR universal frame dowel
Highest permissible loads of a single dowel in masonry
Masonry German approval for the fixing of facades
Ø 8 mm Ø10 mm Ø 14 mm
Solid brick ≥ Mz 12 [kN] 0.40 / 0.601) 0.60 / 0.801) 0.60 / 0.801)
Solid sand-lime brick ≥ KS 12 [kN] 0.40 / 0.601) 0.60 / 0.801) 0.60 / 0.801)
Hollow brick ≥ HLz 12, bulk density ≥ 1.0 kg/dm³ [kN] - 0.30 0.50
Porous sand-lime brick ≥ KSL 6 [kN] - 0.40 0.60
Hollow lightweight concrete blocks ≥ HBl 2 [kN] - 0.25 0.30
Solid lightweight concrete bricks ≥ V 2 [kN] - 0.25 0.50
Three-layered weather shell ≥ B 152) [kN] - 0.60 -
Porous lightweight concrete2) [kN] - 0.30 0.70
Permissible bending moment Mperm [Nm] 5.0 / 4.23) 10.1 / 8.53) 27.8 / 26.13)
Single dowel axial spacing a [mm] 100 1005) / 2504) 250
Axial spacing within dowel group a [mm] 100 1005) / 2504) 250
Edge spacing ar [mm] 100 / 2506) 100 / 2505) 100 / 4006)

1) solid brick
2) see approval for axial and edge spacing as well as component geometry
3) with A4 screws
4) for perforated bricks
5) load reduction by 50% for perforated bricks
6) without load or tilt indication
ar
a ar
a
i Loads for FUR universal frame dowel

Highest permissible loads of a single dowel as a multi-fastener for facade paneling in normal concrete
Concrete ≥ B15 (C12/15) German approval for the fixing of facades
Ø 8 mm Ø10 mm Ø 14 mm
Permissible tensile load-bearing capacity [kN] 0.50 1.00 0.80 1.60 1.20 1.80
Permissible shear load-bearing capacity [kN] 0.50 1.00 0.80 1.60 1.20 1.80
Permissible bending moment Mperm [Nm] 5.0 / 4.21) 10.1 / 8.51) 27.8 / 26.11)
Minimum component thickness hmin [mm] 100 120 120
Axial spacing a [mm] 100 100 100 150 100 150
Axial spacing in the group ai [mm] 50 50 50 50 80 50
Axial spacing group to group ag [mm] 150 240 150 300 180 300
Edge spacing ar [mm] 50 60 50 100 60 100

1) with A4 screws
d d
a ag
ar ar
a ar ai
a
ai ar
ag

KTS frame facade dowel type KT-SL

no. ETA-08/0188 for masonry, hollow brick, sand-lime brick, aerated concrete and
in concrete for redundant (multi-) fasteners for galvanically zinc-plated steel and
stainless steel A4. In special cases, the dowel may also be used with galvanized
screws and also for applications in the open (see approval section 1.2).
Application: The KTS F1 frame dowels are used to fasten light to medium-weight
objects in concrete, masonry and aerated concrete. Main application areas include
substructures of wall and facade paneling, wood and metal structures as well as
ceiling suspensions, cable lines and much more, thanks to the option of redundant
fastening.
Properties: Material nylon, halogen-free. Screw-in locking on the dowel neck, rein-
forced contour on the dowel shaft. Complete with countersunk screws. Screw drive: ETA - 08/0188
TX40 for all dimensions.
Note: Dowels are only permitted in conjunction with the included KTS screws.
galvanized DG 2088
Item no. Type Dowel Ø x length Clamping Anchoring Price per Package
627701080 KT 10 x 80SL 10 x 80 mm 10 mm 70 mm • 100
6277010100 KT10 x 100SL 10 x 100 mm 30 mm 70 mm • 100
6277010120 KT10 x 120SL 10 x 120 mm 50 mm 70 mm • 100
6277010140 KT10 x 140SL 10 x 140 mm 70 mm 70 mm • 100
6277010160 KT10 x 160SL 10 x 160 mm 90 mm 70 mm • 100
6277010180 KT10 x 180SL 10 x 180 mm 110 mm 70 mm • 100
6277010200 KT10 x 200SL 10 x 200 mm 110 mm 70 mm • 100
6277010220 KT10 x 220SL 10 x 220 mm 150 mm 70 mm • 100
6277010240 KT10 x 240SL 10 x 240 mm 170 mm 70 mm • 100
ETA - 08/0188

627721080 KT10 x 80SL-A4 10 x 80 mm 10 mm 70 mm • 100
6277210100 KT10 x 100SL-A4 10 x 100 mm 30 mm 70 mm • 100
6277210120 KT10 x 120SL-A4 10 x 120 mm 50 mm 70 mm • 100
6277210140 KT10 x 140SL-A4 10 x 140 mm 70 mm 70 mm • 100
6277210160 KT10 x 160SL-A4 10 x 160 mm 90 mm 70 mm • 100
KTS frame facade dowel type KT-KL hexagon head

less steel A4. In special cases, the dowel may also be used with galvanized screws
and also for applications in the open (see approval section 1.2).
Application: The KTS frame dowels are used to fasten light to medium-weight
objects in concrete, masonry and aerated concrete. Main application areas include
substructures of wall and facade paneling, wood and metal structures as well as
ceiling suspensions, cable lines and much more, thanks to the option of redundant
fastening.
Properties: Material nylon, halogen-free. Screw-in locking on the dowel neck, rein-
forced contour on the dowel shaft. Complete with hexagonal bolts and pressed-on ETA - 08/0188
washer. Screw drive: WAF 13.
Note: Dowels are only permitted in conjunction with the included KTS screws.
galvanized DG 2088
627711080 KT10 x 80KL 10 x 80 mm 10 mm 70 mm • 100
6277110100 KT10 x 100KL 10 x 100 mm 30 mm 70 mm • 100
6277110120 KT10 x 120KL 10 x 120 mm 50 mm 70 mm • 100
6277110140 KT10 x 140KL 10 x 140 mm 70 mm 70 mm • 100
6277110160 KT10 x 160KL 10 x 160 mm 90 mm 70 mm • 100
6277110180 KT10 x 180KL 10 x 180 mm 110 mm 70 mm • 100
6277110200 KT10 x 200KL 10 x 200 mm 130 mm 70 mm • 100
6277110220 KT10 x 220KL 10 x 220 mm 150 mm 70 mm • 100
6277110240 KT10 x 240KL 10 x 240 mm 170 mm 70 mm • 100
ETA - 08/0188

627731080 KT10 x 80KL-A4 10 x 80 mm 10 mm 70 mm • 100
6277310100 KT10 x 100KL-A4 10 x 100 mm 30 mm 70 mm • 100
6277310120 KT10 x 120KL-A4 10 x 120 mm 50 mm 70 mm • 100
6277310140 KT10 x 140KL-A4 10 x 140 mm 70 mm 70 mm • 100
6277310160 KT10 x 160KL-A4 10 x 160 mm 90 mm 70 mm • 100

i Characteristic load-bearing capacity for use in concrete
Concrete ≥ C 16/20
Type Temperature Characteristic tensile load-bearing capacity Partial safety factor must be taken
into consideration
NRk,p yMc
[kN]
24/40 °C 5.0
KT 10
50/80 °C 3.5
1.8
24/40 °C 7.5
KT 14
50/80 °C 5.0
Concrete C 12/15
Type Temperature Characteristic tensile load-bearing capacity Partial safety factor must be taken
into consideration
NRk,p yMc
[kN]
24/40 °C 3.5
KT 10
50/80 °C 2.5
1.8
24/40 °C 5.0
KT 14
50/80 °C 3.5
i Characteristic load-bearing capacity FRk in [kN] in aerated concrete AAC

(usage category ”d”)
Anchoring base Drilling method Characteristic load-bearing capacity
Gross density Minimum com-
FRK
class pressive strength
[kN]
p fck
24/40 °C 50/80 °C
[kg/m3] [N/mm²]
AAC2, PP2/0.35 ≥ 350 1.8 Hammer drilling 0.9 0.75
AAC6, PP6-0.7 ≥ 650 5.4 Hammer drilling 2.5 2.5
Partial safety factor must be taken into consideration yM,AAC 2.0
i Characteristic load-bearing capacity FRk in [kN] in solid masonry and perforated brick
and hollow brick masonry (usage category “b” and “c”)
Usage category Characteristic load-bearing capacity
FRK
Anchoring base [kN]
KT 10 KT 14
24/40 °C 50/80 °C 24/40 °C 50/80 °C
4.0 4.5 4.5
3.5
6.0 7.5 5.0
3.0 3.0 3.0
Bricks DIN EN 771-1 Mz-NF 2.5
4.5 5.0 3.5
6.0 3.5
5.0 2.5
1.5 1.5 1.5 1.5
b
1.2 1.2 1.2 1.2
Solid sand-lime brick DIN EN 771-2 KS-NF
6.0 4.0 9.0 6.0
5.0 3.0 6.0 4.0
4.0 4.5 4.5
4.0
Solid sand-lime brick DIN EN 771-2 6.0 9.0 9.0
KS-2DF 3.0 3.0 3.0
3.0
4.5 6.0 6.0
Perforated bricks DIN EN 771-1 HLz-2DF 1.5 0.75
c Porous sand-lime brick DIN EN 771-2
1.2 0.6
KSL-8DF
Partial safety factor must
yM,AAC 2.5
still be taken into account
Fischer metal frame dowel FM 8
Application: The Fischer FM 8 metal frame anchors are used to fasten aluminum
and plastic window frames with narrow rebates in concrete, natural stone, solid
bricks and sand-lime bricks.
Properties: Aluminum-zinc coated dowel sleeves with galvanized screws.
Latching noses ensure a tight and pressure-resistant connection. Complete with
round head screws.
galvanized DG 2098
Item no. Dowel Ø x length Drill Ø Minimum Price per Package
anchoring depth 100 pieces contents
62091872 8 x 72 mm 8 mm 30 mm • 100
62091892 8 x 92 mm 8 mm 30 mm • 100
6209181121 8 x 112 mm 8 mm 30 mm • 100
620918132 8 x 132 mm 8 mm 30 mm • 100
Toge metal frame dowel TU 10

cracked concrete, approval no. ETA-09/0237 and ETA-09/0238 for use as (redundant)
multi-fastener.
Application: The Toge TU 10 metal frame dowels are used to fasten window and
door frames in concrete, natural stone, solid bricks and solid sand-lime bricks.
Properties: Aluminum-zinc coated dowel sleeves with galvanized screws.
Knock-in lock against premature expansion. Complete with round head screws.
galvanized DG 2096
Item no. Ø x overall length Drill Ø Minimum Price per Package
620911072 10 x 72 mm 10 mm 30 mm • 100
620911092 10 x 92 mm 10 mm 30 mm • 100
6209110112 10 x 112 mm 10 mm 30 mm • 100
6209110132 10 x 132 mm 10 mm 30 mm • 100
6209110152 10 x 152 mm 10 mm 30 mm • 100
6209110182 10 x 182 mm 10 mm 30 mm • 100
6209110202 10 x 202 mm 10 mm 30 mm • 100
i Loads for metal frame dowel TU 10 galv. zinc-plated

Permissible loads of a single dowel for multi-fasteners of non-structural systems in cracked concrete (concrete tensile zone) of strength C20/25 (~B25)
Type effective anchoring depth minimum component permissible load necessary edge spacing necessary axial spacing
thickness for permissible load for permissible load
hef hmin Fperm ccr, N scr, N
[mm] [mm] [kN] [mm] [mm]
TU 10 40 100 2.9 60 120
Permissible loads of a single dowel in non-cracked normal concrete (concrete pressure zone) of strength C 20/25 (~ B25)
TU 10 40 100 3.6 60 120
The two approval notices ETA-09/0237 and ETA-09/0238 (multiple use for non-structural systems) are to be observed.

Toge metal frame dowel for hollow brick TK 10
Application: The Toge TK 10 metal frame dowels are used to fasten window and
door frames in aerated concrete, hollow brick, perforated sand-lime bricks and
hollow blocks.
Properties: Multi-slotted expansion sleeve for perforated brick. Aluminum-zinc
coated dowel sleeves with galvanized screws. Knock-in lock against premature
expansion. Complete with round head screws.
Advantages:
- ideal for installation in perforated brick
galvanized DG 2096
Item no. Ø x overall length Drill Ø Minimum Price per Package
6209010112 10 x 112 mm 10 mm 50 mm • 100
6209010132 10 x 132 mm 10 mm 50 mm • 100
6209010152 10 x 152 mm 10 mm 50 mm • 100
6209010182 10 x 182 mm 10 mm 50 mm • 100
Concrete frame screw
Application: The concrete frame screws are used to fasten window frames in nearly
all building materials.
Properties: Fastening without dowels for a tight and pressure-resistant screw con-
nection for window frames. Self-cutting, continuous thread. With countersunk head
screws for metal and plastic windows. The continuous thread prevents the frame
from being pulled up to the material.
with countersunk head TX 30 DG 2094

Item no. Screw Ø x length Hole Ø in Hole Ø in frames Price per Package
masonry 100 pieces contents
6210272 7.5 x 72 mm 6 mm 6.2 mm • 100
6210280 7.5 x 92 mm 6 mm 6.2 mm • 100
62102100 7.5 x 112 mm 6 mm 6.2 mm • 100
62102120 7.5 x 132 mm 6 mm 6.2 mm • 100
62102150 7.5 x 152 mm 6 mm 6.2 mm • 100
62102180 7.5 x 182 mm 6 mm 6.2 mm • 100
62102212 7.5 x 212 mm 6 mm 6.2 mm • 100
with cheese head TX 25 DG 2094

6211372 7.5 x 72 mm 6 mm 6.2 mm • 100
6211392 7.5 x 92 mm 6 mm 6.2 mm • 100
62113112 7.5 x 112 mm 6 mm 6.2 mm • 100
62113132 7.5 x 132 mm 6 mm 6.2 mm • 100
62113152 7.5 x 152 mm 6 mm 6.2 mm • 100
62113182 7.5 x 182 mm 6 mm 6.2 mm • 100
62113212 7.5 x 212 mm 6 mm 6.2 mm • 100
Continuation of concrete frame screw
with cheese head TX 30 DG 2094

6211572 7.5 x 72 6 6.2 • 100
6211592 7.5 x 92 6 6.2 • 100
62115112 7.5 x 112 6 6.2 • 100
62115132 7.5 x 132 6 6.2 • 100
62115152 7.5 x 152 6 6.2 • 100
62115182 7.5 x 182 6 6.2 • 100
62115212 7.5 x 212 6 6.2 • 100
Screw-in depths
Material 20 mm 30 mm 40 mm 50 mm 60 mm
Concrete
Sand-lime brick
Solid bricks
Pumice
Lightweight concrete
Honeycomb brick
FAKKT nail anchor with flat collar
Application: Nail anchors are used to fasten light objects such as slats, laths,
cable ducts, clips, profiles, and much more in concrete, solid bricks, sand-lime
bricks or aerated concrete and to a lesser degree in hollow bricks.
Properties: Nylon, halogen-free. With flat, surface-mounted collar and galvanized
pan head nail-screws. Quick and simple push-through installation. It is possible to
make later adjustments thanks to the additional cross recess, and removal in the
event of faulty installation is easy.
Note: If installation is done in hollow bricks, it should be noted that the front
expansion zone part of the nail anchor fully catches at least one stone base.
Nylon DG 2087
Item no. Hole Ø x dowel Anchoring depth Clamping range, Price per Package
length min. max. 100 pieces contents
62844530 5 x 30 30 mm - • 200
62844540 5 x 40 40 mm - • 200
62844635 6 x 35 25 mm 5 mm • 200
62844640 6 x 40 30 mm 10 mm • 200
62844650 6 x 50 30 mm 20 mm • 200
62844660 6 x 60 30 mm 30 mm • 200
62844680 6 x 80 30 mm 50 mm • 100
62844860 8 x 60 40 mm 20 mm • 100
62844880 8 x 80 40 mm 40 mm • 100
628448100 8 x 100 40 mm 60 mm • 100

FAKKT nail anchor with countersunk collar
Application: Nail anchors are used to fasten light objects such as slats, laths,
cable ducts, clips, profiles, substructures, and much more in concrete, solid bricks,
sand-lime bricks or aerated concrete and to a lesser degree in hollow bricks.
Properties: Nylon, halogen-free. With countersunk collar and galvanized pan head
nail-screws. Quick and simple push-through installation. It is possible to make later
adjustments thanks to the additional cross recess, and removal in the event of faulty
installation is easy.
Note: If installation is done in hollow bricks, it should be noted that the front expan-
sion zone part of the nail anchor fully catches at least one stone base.
Nylon DG 2087
Item no. Hole Ø x dowel Anchoring depth Clamping range, Price per Package
length min. max. 100 pieces contents
62845640 6 x 40 30 mm 10 mm • 200
62845650 6 x 50 30 mm 20 mm • 200
62845660 6 x 60 30 mm 30 mm • 200
62845680 6 x 80 30 mm 50 mm • 100
62845860 8 x 60 40 mm 20 mm • 100
62845880 8 x 80 40 mm 40 mm • 100
628458100 8 x 100 40 mm 60 mm • 100
628458120 8 x 120 40 mm 80 mm • 100
628458140 8 x 140 40 mm 100 mm • 100
628458160 8 x 160 40 mm 120 mm • 100
Fischer nail anchor N
Application: Nail anchors are used to fasten light objects such as slats, laths, cable
ducts, clips, profiles, substructures and much more in concrete, solid bricks, solid
sand-lime bricks or aerated concrete and to a lesser degree in hollow bricks.
Properties: Nylon, halogen-free. With countersunk collar and galvanized pan head
nail-screws. Quick and simple push-through installation. Integrated knock-in stop
prevents premature expanding. It is possible to make later adjustments thanks to the
additional cross recess, and removal in the event of faulty installation is easy.
Note: If installation is done in hollow bricks, it should be noted that the front expan-
sion zone part of the nail anchor fully catches at least one stone base.
Nail anchor N-S with cheese head DG 2089
Item no. Type Hole Ø x Clamping Anchoring Price per Package
dowel length range depth 100 pieces contents
624455 N 5 x 30 / 5 F 5 x 30 mm 5 mm min. 25 mm • 100
6244515 N 5 x 40 / 15 F 5 x 40 mm 15 mm min. 25 mm • 100
6244610 N 6 x 40 / 10 F 6 x 40 mm 10 mm min. 30 mm • 100
6244630 N 6 x 60 / 30 F 6 x 60 mm 30 mm min. 30 mm • 100
6244650 N 6 x 80 / 50 F 6 x 80 mm 50 mm min. 30 mm • 100
Nail anchor N-F with countersunk head DG 2089

Item no. Type Hole Ø x Clamping Anchoring Price per Package
dowel length range depth 100 pieces contents
6244820 N 8 x 60 / 20 S 8 x 60 mm 20 mm min. 40 mm • 100
6244860 N 8 x 100 / 60 S 8 x 100 mm 60 mm min. 40 mm • 100
6244880 N 8 x 120 / 80 S 8 x 120 mm 60 mm min. 40 mm • 100
1 2 3 4
Kombi nail/screw dowel Total Fixx
Application: Total Fixx nail/screw anchors are used to fasten light objects such as
slats, laths, cable ducts, clips, profiles, substructures and much more in concrete,
solid bricks, sand-lime bricks, aerated concrete, hollow bricks as well as plaster-
board and chipboard screws. The nail anchors are simply driven in with a hammer
or screwed in for perforated bricks and panel building materials.
Properties: Very variable, can be used as a nail anchor and as a screw anchor.
With flat, surface-mounted collar and galvanized pan head nail-screws. Quick and
simple push-through installation.
Advantages:
- unique combined nail/screw anchor that expands in solid building materials like
a nail anchor and anchors positively in perforated brick or panel building materials
like a knotted dowel
Plastic DG 2087
Item no. Type Hole Ø x dowel Clamping range Price per Package
length 100 pieces contents
62445530 TF 5 / 30 5 x 35 mm 5 mm • 200
62445640 TF 6 / 40 6 x 40 mm 5 mm • 200
1 2 3 4
Allfa nail anchors with sealing washer
Application: Nail anchors with sealing washers are used to fasten metal sheets,
signs, profiles, slats and much more outdoors. Such nail anchors are often used as
an alternative to Spengler screws.
Properties: Complete with screws made of stainless steel with stainless steel wash-
ers or made of copper-plated stainless steel with copper washers. Washers with
cured-on neoprene seals. The sealing washers reliably prevent the penetration of
moisture.

Item no. Hole Ø x dowel Clamping range, Washers Ø Price per Package
length max. 100 pieces contents
62858640 6 x 40 mm 15 mm 15 mm • 200
62858660 6 x 60 mm 35 mm 15 mm • 100
Clamp nail
Application: Quick anchor clamp nails are used to quickly fasten light objects to
building materials with high strength such as concrete or solid bricks.
Properties: Quick anchor clamp nails are made of spring steel that presses against
the borehole wall after being driven in.
Galvanized spring steel DG 2085

Item no. Hole Ø x nail length Price per 100 pieces Package contents
62415890 8 x 90 mm • 100

FAKKT nylon dowels
Application: The FAKKT nylon dowels are used to fasten light objects in concrete,
aerated concrete, masonry, sand-lime bricks or perforated bricks.
Properties: Made of nylon, weather resistant and halogen free. Has universal appli-
cations in conjunction with wood or chipboard screws. Anti-rotation lock.
Note: The required screw length results from dowel length + non-structural materials,
such as plaster + thickness of the fixture + 1 x screws-Ø.
Nylon DG 2119
Item no. Dowel Ø x length Drill Ø for woodscrews Price per Package
or chipboard 100 pieces contents
screws
620825 5 x 25 mm 5 mm 2.5 - 4 mm • 200
620826 6 x 30 mm 6 mm 3.5 - 5 mm • 100
620828 8 x 40 mm 8 mm 4.5 - 6 mm • 100
6208210 10 x 50 mm 10 mm 6 - 8 mm • 50
6208212 12 x 60 mm 12 mm 8 - 10 mm • 25
6208214 14 x 70 mm 14 mm 10 - 12 mm • 20
FAKKT universal dowel without collar
Application: The FAKKT universal dowels make secure anchoring in almost all
materials possible. Main application areas include applications in concrete, aerated
concrete, solid and perforated brick, sand-lime bricks and plasterboard.
Properties: Made of PE polyethylene. 3x split dowel body with anti-rotation lock.
FAKKT universal dowels expand in solid building materials or expand and become
knotted in perforated and panel building materials. Dowel size 12 and 14 only suit-
able for hollow blocks.
Advantages:
- a dowel for almost all materials (not for approval-related installations)
- universal functional principle permits both expanding and knotting
Note: To achieve optimum knotting, the screw length must be selected as follows:
Dowel length + any existing non-structural materials such as plaster + strength of
the fixture + at least1 x screw diameter.
The threadless part of the screw cannot be longer than the fixture.
DG 2119
Item no. Dowel Ø x length Drill Ø for woodscrews or Price per Package
chipboard screws 100 pieces contents
62401636 6 x 36 mm 6 mm 3.5 mm • 100
62401850 8 x 50 mm 8 mm 5 - 6 mm • 50
624011060 10 x 60 mm 10 mm 6 - 8 mm • 50
624011272 12 x 72 mm 12 mm 8 - 10 mm • 25
624011475 14 x 75 mm 14 mm 10 - 12 mm • 20
FAKKT universal dowel with collar
Application: The FAKKT universal dowels make secure anchoring in almost all
Properties: Made of PE polyethylene. 3x split dowel body with anti-rotation lock.
The collar prevents slipping deeper. FAKKT universal dowels expand in solid building
materials or expand and become knotted in perforated and panel building materials.
Dowel size 12 and 14 only suitable for hollow blocks.
Advantages:
the fixture + at least 1 x screw diameter. The threadless part of the screw cannot be
longer than the fixture.
DG 2119
Item no. Dowel Ø x length Drill Ø for woodscrews Price per Package
or chipboard 100 pieces contents
screws
62402636 6 x 36 mm 6 mm 3.5 mm • 100
62402851 8 x 50 mm 8 mm 5 - 6 mm • 50
624021061 10 x 60 mm 10 mm 6 - 8 mm • 50
624021271 12 x 72 mm 12 mm 8 - 10 mm • 25
624021475 14 x 75 mm 14 mm 10 - 12 mm • 20
Fischer universal dowels UX
Application: The Fischer UX universal dowels make secure anchoring in almost all
Properties: Made of nylon, weather resistant and halogen free. Has universal ap-
plications in conjunction with wood or chipboard screws. In the UX-R type, the edge
prevents the dowel neck from slipping deeper. The Fischer UX universal dowels
expand in solid building materials or expand and become knotted in perforated and
panel building materials. With knock-in stop and anti-rotation lock. Optimum screw
guidance through transverse connections.
Advantages:
- transverse connections for optimum screw guidance
without edge
Nylon DG 2115
Item no. Dowel Ø x Drill Ø Wood screws or Price per Package
length chipboard screws 100 pieces contents
620876 6 x 35 mm 6 mm 4 - 5 mm • 100
620878 8 x 50 mm 8 mm 4.5 - 6 mm • 100
6208710 10 x 60 mm 10 mm 6 - 8 mm • 50
6208712 12 x 70 mm 12 mm 8 - 10 mm • 25
6208714 14 x 75 mm 14 mm 10 - 12 mm • 20
with edge
Nylon DG 2115
Item no. Dowel Ø x Drill Ø Woodscrews or Price per Package
length chipboard screws 100 pieces contents
620886 6 x 35 mm 6 mm 4 - 5 mm • 100
620888 8 x 50 mm 8 mm 4.5 - 6 mm • 100
6208810 10 x 60 mm 10 mm 6 - 8 mm • 50

Continuation of Fischer universal dowels UX
Note: The required screw
length results from dowel
length + non-structural
materials, such as plaster
+ thickness of the fixture
+ 1 x screw diameter.
1 2 3 4 5
1 2 3 4 5
Fischer nylon dowels SX
Application: The Fischer SX nylon dowels are used to fasten light objects in con-
crete, aerated concrete, masonry, sand-lime bricks, solid plasterboard or perforated
bricks.
cations in conjunction with wood or chipboard screws. Powerful 4x expansion for the
highest holding values. Distinct dowel edge prevents it from slipping deeper. Integrat-
ed knock-in stop makes push-through installation possible. Stable anti-rotation lock.
Advantages:
- powerful 4x expansion
- integrated knock-in stop
- dowel edge prevents it from slipping deeper
such as plaster + thickness of the fixture + 1 x screw diameter.
Nylon DG 2115
Item no. Type Dowel Ø x Drill Ø for wood- Price per Package
length screws or 100 pieces
chipboard
screws
620845 SX 5 5 x 25 mm 5 mm 3 - 4 mm • 100
620846 SX 6 6 x 30 mm 6 mm 4 - 5 mm • 100
620848 SX 8 8 x 40 mm 8 mm 4.5 - 6 mm • 100
6208410 SX 10 10 x 50 mm 10 mm 6 - 8 mm • 50
6208412 SX 12 12 x 60 mm 12 mm 8 - 10 mm • 25
6208414 SX 14 14 x 70 mm 14 mm 10 - 12 mm • 20
6208416 SX 16 16 x 80 mm 16 mm 12 mm • 10
Fischer nylon dowels S
Application: The Fischer nylon dowels are used to fasten light objects in concrete,
aerated concrete, masonry, sand-lime bricks or perforated bricks.
cations in conjunction with wood or chipboard screws. Anti-rotation lock.
such as plaster + thickness of the fixture + 1 x screw diameter.
DG 2115
Item no. Type Dowel Ø x Drill Ø for wood- Price per Package
length screws or 100 pieces contents
chipboard
screws
620805 S5 25 mm 5 mm 3 - 4 mm • 200
620806 S6 30 mm 6 mm 4 - 5 mm • 200
620808 S8 40 mm 8 mm 4.5 - 6 mm • 200
6208010 S 10 50 mm 10 mm 6 - 8 mm • 100
6208012 S 12 60 mm 12 mm 8 - 10 mm • 25
6208014 S 14 75 mm 14 mm 10 - 12 mm • 20
6208016 S 16 80 mm 16 mm 12 mm • 10
6208020 S 20 90 mm 20 mm 16 mm • 5
Fischer nylon dowels M-S
Application: The Fischer M-S nylon dowels are used to fasten light objects in con-
crete, natural stones, aerated concrete or masonry with metric screws or threaded
rods for offset installation.
Properties: Made of nylon, weather-resistant and halogen-free, anti-rotation lock.
Advantage:
- suitable for metric screws and threaded rods
Nylon DG 2112
Item no. Type Dowel Ø x Hole Ø for screws Price per Package
length 100 pieces contents
620816 M6S 6 x 40 mm 12 mm M 6 mm • 100
620818 M8S 8 x 50 mm 10 mm M 8 mm • 50
6208110 M 10 S 10 x 70 mm 14 mm M 10 mm • 20
6208112 M 12 S 12 x 80 mm 16 mm M 12 mm • 10

TOX TRI all-purpose dowels
Application: The Tox TRI universal dowels make secure anchoring in almost all
Properties: Made of PE polyethylene. 3-part dowel body with 2x anti-rotation lock
on the dowel neck and on the dowel body. Tox TRI all-purpose dowels expand in
solid building materials or expand and become knotted in perforated and panel
building materials.
Advantages:
-a dowel for almost all materials (not for approval-related installations)
-u niversal functional principle permits both expanding and knotting
DG 2114
62085531 5 x 31 mm 5 mm 3 - 4 mm • 100
62085636 6 x 36 mm 6 mm 4 - 5 mm • 100
62085651 6 x 51 mm 6 mm 4 - 5 mm • 100
62085851 8 x 51 mm 8 mm 5 - 6 mm • 100
620851061 10 x 61 mm 10 mm 7 - 8 mm • 50
620851271 12 x 71 mm 12 mm 8 - 10 mm • 25
620851475 14 x 75 mm 14 mm 10 - 12 mm • 20
1 2 3 4
TOX TRIKA all-purpose dowels
Application: The Tox TRIKA universal dowels make secure anchoring in almost all
Properties: Made of PE polyethylene. 3-part dowel body with 2x anti-rotation lock
on the dowel neck and on the dowel body. Cap prevents slipping deeper. Tox TRIKA
all-purpose dowels expand in solid building materials or expand and become knotted
in perforated and panel building materials.
Advantages:
DG 2114
62086532 5 x 31 mm 5 mm 3 - 4 mm • 100
62086637 6 x 36 mm 6 mm 4 - 5 mm • 100
62086852 8 x 51 mm 8 mm 5 - 6 mm • 100
620861062 10 x 61 mm 10 mm 7 - 8 mm • 50
620861272 12 x 71 mm 12 mm 8 - 10 mm • 25
620861476 14 x 78 mm 14 mm 10 - 12 mm • 20
1 2 3 4
Mungo perforated brick dowel
Application: The Mungo ML perforated brick dowels are used to fasten light objects
in concrete, aerated concrete, perforated bricks, masonry, sand-lime bricks or plas-
ter. Thanks to the long expanding zone they are particularly suited for materials with
cavities or other building blocks with a porous structure.
Properties: The Mungo ML perforated brick dowels have special geometry that
causes knotting when the screw is screwed in. Has universal applications in
conjunction with wood or chipboard screws.
Advantages:
- long design spans strong fixings and strong building material supports
- knotted in the cavity
Nylon DG 2115
Item no. Dowel Ø x length Drill Ø for screws Ø Price per 100 pieces Package
contents
62406660 6 x 60 mm 6 mm 3.5 - 5 mm • 100
62406880 8 x 80 mm 8 mm 5 - 6 mm • 100
624061090 10 x 90 mm 10 mm 7 mm • 100

Fischer aerated concrete dowel GB

no. Z-21.2-123 for aerated concrete with galvanically zinc-plated steel screws and
stainless steel A4. The size 14 is also approved for the roofing and ceiling panels
that are created from load tension according to DIN 4223.
Application: The Fischer GB aerated concrete dowels are used to fasten light
to medium-weight objects in aerated concrete. Main application areas include
applications in interior design as well as wood or metal substructures.
Properties:
Material nylon, halogen-free. Helical external ribs cut positively into the aerated
concrete. Favorable pressure distribution thanks to the large external ribs.
Small borehole that is only the core Ø of the dowel. No special tools required.
Note: The GB aerated concrete dowels are only permitted in conjunction with
Fischer safety screws. The boreholes must be created using a rotary drill.
Plastic DG 2112
Item no. Type Drill Ø in Dowel length for wood- Price per Package
breeze block screw 100 pieces contents
622038 GB 8 8 mm 50 mm 5 mm • 25
6220310 GB 10 10 mm 55 mm 7 mm • 20
6220314 GB 14 14 mm 75 mm 10 mm • 10
1 2 3 4 5
i Loads for GB aerated concrete dowel

Very high permissible loads1) of a single dowel in aerated concrete.
When using Fischer safety screws4), load values according to the selection table apply.
The entire Z-21.2-123 approval notice is to be observed during measurement.
Type GB 8 GB 10 GB 14
Permissible load in the respective material Fperm3)
Aerated concrete PB2, PP2 (G2) [kN] 0.20 0.25 0.40
Aerated concrete P3.3 (GB3.3) [kN] 0.30 0.50 0.80
Aerated concrete ≥ PB4, PP4, P4.4 (≥ G4 , GB4.4) [kN] 0.40 0.60 0.90
Tensile zone of aerated concrete roof and ceiling slabs according
[kN] - - 0.30
to DIN 4223 ≥ P3.3 (GB3.3)
Min. axial spacing 7) smin [mm] 150 (100)8) 200 (150)8) 300 (200)8)
Min. edge spacing 2) cmin [mm] 100 150 200
Edge spacing to mortared joints 6) cmin [mm] 9 10 12
Minimum component thickness hmin [mm] 75 100 2005)
Anchoring depth hef (hv) [mm] 50 55 75
2) Minimum edge spacing.
3) Valid for tensile load, transverse load and diagonal pull at any angle. For combinations of tensile and transverse loads as well as bending moments, see the
approval notice.
4) gzp and A4.
5) The minimum component thickness for aerated concrete and ceiling slabs is 150 mm.
6) Only in aerated concrete masonry.
7) Minimum possible axial spacing with simultaneous reduction of the permissible load.
8) Values in the parentheses apply to PB2, PP2 (G2).
Fischer plasterboard dowel GK
Application: The Fischer GK plastic plasterboard dowels are used to fasten light
objects to plasterboard with single or double paneling.
Properties: The self-cutting Fischer GK plastic plasterboard dowels cut positively
into the plasterboard using the setting and insertion tools supplied by the manu
facturer.
Installation instructions: The dowels are driven positively into the plaster board
with the included setting tool. The insertion torque must be limited when using
electric screwdrivers.
Plastic DG 2121
Item no. Dowel length for screws Price per Package
100 pieces contents
62217 22 mm Wood and chipboard screws 4 - 5 mm, • 100
sheet metal screws 4.2 - 4.8 mm
Mungo Jet Plug plasterboard dowel
Application: The Mungo Jet Plug metal plasterboard dowels are used to fasten light
objects to plasterboard, plaster components or aerated concrete. Suitable for single
and double paneling.
Properties: The self-drilling Mungo Jet Plug metal plasterboard dowels cut positively
into the plasterboard. The reversing lock allows the screw to be removed without the
dowel rotating as well.
Installation instructions:
The tip of the dowel is pressed in by hand. It is then screwed into the material until it
stops using a screwdriver or electric screwdriver. Pre-drill 8 mm holes when installing
in solid plaster components or aerated concrete.
Galvanized steel DG 2124

Item no. Dowel length for screws Screw-in Price per Package
depth max. 100 pieces contents
622171 38 mm Chipboard screws 4 - 4.5 mm, 30 mm • 100
metric screws M 4

Mungo Fiber Jet plasterboard dowel
Application: The Fiber Jet plastic plasterboard dowels are used to fasten light
objects to plasterboard with single paneling. The tip of the dowel is pressed into the
plasterboard by hand. It is then driven into the plasterboard until it stops using a
screwdriver or electric screwdriver.
Plastic DG 2124
Item no. Dowel for screws Price Package
length per 100 contents
pieces
622172 29 mm Wood and chipboard • 100
screws 4 - 4.5 mm
Fischer cavity dowel HM
Application: The Fischer HM cavity dowels are used to fasten light objects to plas-
terboard, wooden boards and hollow ceilings.
Properties: The Fischer HM cavity dowels are delivered complete with metric
screws. High load bearing capacity due to extensive contact pressure of 5 support-
ing elements. Anti-rotation lock thanks to several distinctive claws. Repeated loosen-
ing and fastening of fixtures is possible. Wide range of panel thicknesses for each
dowel diameter.
Installation instructions: Ideally, the dowels are installed with HM Z spreader for-
ceps. Installation is also possible with a screwdriver or battery-powered screwdriver.
However, it is absolutely necessary to use an installation object or special equipment
at least 6 mm thick as an anti-rotation device.
Advantages:
- large contact radius free of expansion increase load-bearing capacity and safety
- light loosening and refastening of fixtures
galvanized DG 2126
Item no. Type Thread Ø Dowel Drill Ø Slab Price per Package
length thickness 100 pieces contents
62114412 HM 4/32 S M4 32 mm 8 mm 3 - 13 mm • 50
62114420 HM 4/46 S M4 46 mm 8 mm 5 - 18 mm • 50
62114516 HM 5/37 S M5 37 mm 12 mm 6 - 15 mm • 50
62114521 HM 5/52 S M5 52 mm 12 mm 7 - 21 mm • 50
62114524 HM 5/65 S M5 65 mm 12 mm 20 - 34 mm • 50
62114616 HM 6/37 S M6 37 mm 13 mm 6 - 15 mm • 50
62114621 HM 6/52 S M6 52 mm 13 mm 10 - 21 mm • 50
62114634 HM 6/65 S M6 65 mm 13 mm 20 - 34 mm • 50
62114646 HM 6/80 S M6 80 mm 13 mm 38 - 50 mm • 50
62114821 HM 8/55 S M8 55 mm 13 mm 10 - 21 mm • 50
1 2 3 4 5
Fischer quick assembly pliers
Application: For quickly fastening the Fischer HM cavity dowels.

Note: The standard HM Z 2 pliers are not suitable for the HM 8 x 55 SS dowel type.
DG 2122
contents
621151 HM Z 1 (pro) • 1
621152 HM Z 2 (standard) • 1
Toggle dowels
Application: Toggle dowels are used to fasten light objects to hollow walls, hollow
ceilings, suspended ceilings and sandwich elements. The dimensions M 8 and M 10
are mainly used to fasten pipes up to DN 50, assembly rails, ventilation ducts or
retainer bars to sheet metal roofs or fastening sinks or urinals.
Properties: Rigid toggle beam. Extensive pressure distribution. Bolt-through swivel,
therefore easily adjustable. Long threaded rods for spanning strong fixtures.
Note: Rigid, one-piece toggle beams require a relatively large cavity. Note required
cavity depth.
with screw-through
threaded shaft DG 2128
with screw-through
Item no. Thread Ø x Bore- required Price Package threaded shaft
overall length hole Ø void per 100 contents
in the depth pieces
board
621234100 M 4 x 90 mm 14 mm 70 mm • 50
621235100 M 5 x 100 mm 15 mm 70 mm • 100
621236100 M 6 x 100 mm 17 mm 70 mm • 100
621238100 M 8 x 100 mm 20 mm 75 mm • 100
6212310180 M 10 x 180 mm 30 mm 140 mm • 25
with ceiling hook DG 2128

Item no. Thread Ø x Bore- required Price Package
overall length
hole Ø void per 100 contents
in the depth pieces
board with ceiling hook
62123590 M 5 x 100 mm 15 mm 70 mm • 100
62123690 M 6 x 100 mm 17 mm 70 mm • 100

Spring flap toggle dowel
Type: Spring toggles are used to fasten light objects to hollow walls, hollow ceilings,
suspended ceilings and sandwich elements.
Properties: Split toggle beam for low cavity depths. Extensive pressure distribution.
Bolt-through swivel, therefore easily adjustable. Long threaded rods for spanning
strong fixtures. with threaded rod
Advantages:
- also suitable for low cavities thanks to the two-part crossbeam
with threaded rod DG 2128

overall length hole Ø cavity per 100 contents
in the depth pieces
board
621244100 M 4 x 100 mm 14 mm 35 mm • 50
621245100 M 5 x 100 mm 16 mm 46 mm • 25
621246100 M 6 x 100 mm 16 mm 46 mm • 25
with ceiling hook
with ceiling hook DG 2128
overall length hole Ø cavity per 100 contents
in the depth pieces
board
621255100 M 5 x 100 mm 16 mm 46 mm • 25
Fischer insulation dowels FID
Application: The Fischer FID insulation dowels are used to directly anchor light
objects in styrofoam, polystyrene, thermal insulation composite systems. Main
application areas include light lamps, mailboxes, motion detectors or signs on
insulated facades.
Properties: The Fischer FID insulation dowel is made of impact-resistant solid
plastic. The large spiral thread cuts positively into the insulation. Simple installation
without special tools.
Advantage:
- no pre-drilling through thin plaster layers necessary.
Note: To prevent water from penetrating the insulation, the edge of the dowel 1 2 3
should be sealed with solvent-free construction silicone, e.g. our Pro N, after
pre-positioned installation.
Plastic DG 2103
Item no. Type Dowel Chipboard Screw-in depth of Price Package
length screws Ø screws in the dowels per 100 contents
pieces
6265650 FID 50 50 mm 4.5 - 5 mm 30 mm • 25
Insulation holder one-part IPM
Application: The IPM insulation holders are used to fasten soft mineral fiber mats
in walls on concrete, natural stone, solid bricks and solid sand-lime bricks.
Properties: Made of plastic, one-piece. Simple installation - just insert into the
borehole using a hammer. Large supporting disk of 90 mm. With head hole bore for
holding a fabric mesh container. Temperature resistance of -40 °C for +70 °C.
Plastic DG 2107
Item no. Type Drill Ø Length Min. depth of Insulation Price Package
drilled holes thickness per 100 contents
pieces
621296080 IPM 8/100 8 mm 100 mm 25 mm 70 - 80 mm • 250
6212980100 IPM 8/120 8 mm 120 mm 25 mm 90 - 100 mm • 250
Insulation holder two-part KP
Application: The KP insulation holders are used to fasten hard-foam boards in walls
on concrete, natural stone, solid bricks and solid sand-lime bricks.
Properties: Made of plastic, two-part. Simple installation - just insert into the bore-
hole using a hammer. Additional plastic nail penetrates the entire dowel and optimally
expands it. Supporting disk 50 mm. Temperature resistance of -40 °C for +70 °C.
Plastic DG 2107
Item no. Type Drill Ø Length Min. depth of Insulation Price Package
drilled holes thickness per 100 contents
pieces
621275060 KP 10/90 10 mm 90 mm 40 mm 50 - 60 mm • 250
621277080 KP 10/110 10 mm 110 mm 40 mm 70 - 80 mm • 250
6212790100 KP 10/130 10 mm 130 mm 40 mm 90 - 100 mm • 250
62127110120 KP 10/150 10 mm 150 mm 40 mm 110 - 120 mm • 250
62127130140 KP 10/180 10 mm 180 mm 40 mm 130 - 140 mm • 250
Fischer scaffolding dowel ROE
Application: The Fischer ROE dowels are used to anchor scaffolding in concrete,
natural stone, solid brick or solid sand-lime brick.
Properties: Made of nylon, weather resistant and halogen free. Anti-rotation lock.
Plastic DG 2104
Item no. Type Drill Ø Dowel length Min. depth of Price per Package
drilled holes 100 pieces contents
6221570 S 14 ROE 70 14 mm 70 mm 80 mm • 25
62215100 S 14 ROE 100 14 mm 100 mm 110 mm • 25
62215135 S 14 ROE 135 14 mm 135 mm 145 mm • 25
Scaffolding screw - lifting eye bolt
Application: For directly screwing into wood or, in conjunction with plastic dowels,
for attachments in concrete, natural stone or masonry. Main application areas
include suspensions, anchor poles or fastening facade scaffolding (12 mm),
e.g. with Fischer ROE dowels.
Properties: Welded eyelet.
galvanized DG 2104
Item no. Shaft Ø x length Eye width Price per 100 pieces Package contents
62214100 8 x 100 mm 22 mm • 20
62214120 12 x 120 mm 22 mm • 100
62214160 12 x 160 mm 22 mm • 100
62214190 12 x 190 mm 22 mm • 100
62214230 12 x 230 mm 22 mm • 100
Sealing cap for scaffolding dowels
Application: These caps are used to seal the ROE scaffolding dowels after removing
the scaffolding eyelets.
Plastic DG 2185
Item no. Size for dowels with for plastic dowel Price per Package
metric thread 100 pieces contents
6222712 12 x 30 mm M 12 14 mm • 100

Assortment of adjustment blocks MIX 155
Application: Adjustment blocks are used to orient, balance and support building
components. Main application areas include orienting building components in pre-
fabricated construction, rafters in the construction of roof trusses, substructures in
facade construction or in ceiling and wall paneling. The proper installation according
to RAL of doors and windows as well as the compensation for unevenness in the
entire roof area and when installing solar panels.
Properties: For universal use, time-saving. High-impact, slip-resistant, temperature-
resistant plastic. Very capable of withstanding high pressure up to max. 4 t.
Scope of supply:
30 x red 80 x 50 x 2 mm
30 x green 80 x 50 x 3 mm
30 x blue 80 x 50 x 5 mm
20 x black 80 x 50 x 7 mm
20 x gray 80 x 50 x 10 mm
20 x yellow 80 x 50 x 15 mm
Note: These adjustment blocks are also offered individually.
DG 2180
628301 155 Parts • 1
Assortment of assembly wedges MIX 240
Application: Assembly wedges are used to orient, balance and support building
components. Main application areas include: Orienting building components in
pre-fabricated construction, rafters in the construction of roof trusses as well as
substructures in facade construction or in ceiling and wall paneling.
The installation of doors and windows. Compensation for unevenness in
the entire roof area and when installing solar panels.
Properties: For universal use, time-saving. High-impact, slip-resistant,
temperature-resistant plastic.
Scope of supply:
80 x red 65 x 28 x 8 mm
50 x white 80 x 40 x 10 mm
40 x gray 90 x 43 x 15 mm
10 x black 140 x 43 x 25 mm
Note: These assembly wedges are also offered individually. DG 2180
628302 240 Parts • 1
Assortment of Quickfix distance assembly blocks MIX 250
Application: Quickfix spacing blocks are used to orient, balance and support build-
ing components. Main application areas include orienting building components in
pre-fabricated construction, rafters in the construction of roof trusses as well as
substructures in facade construction or in ceiling and wall paneling.
The installation of doors and windows. Compensation for unevenness in the entire
roof area and when installing solar panels.
resistant plastic. Thanks to the lower large opening
also suitable for pre-screwed, fixed laths and rails.
Scope of supply:
45 x blue 80 x 50 x 1 mm
45 x white 80 x 50 x 2 mm
45 x red 80 x 50 x 3 mm
45 x green 80 x 50 x 5 mm
Note: These Quickfix spacing blocks are also offered individually.
DG 2180
628305 250 Parts • 1
Assortment of supporting glazier blocks MIX 350
Application: Supporting glazier blocks are used for proper installation according
to ÖNORM and RAL for window and door installation.
Properties: High-impact plastic, slip-resistant and temperature-resistant.
Also suitable as glazier block for 3-panel (insulated glass) panes.
Scope of supply:
50 x white 100 x 30 x 1 mm
50 x blue 100 x 30 x 2 mm
50 x red 100 x 30 x 3 mm
50 x green 100 x 30 x 5 mm
50 x black 100 x 30 x 6 mm
50 x gray 100 x 30 x 8 mm
DG 2180
628304 350 Parts • 1
Assortment of glazier blocks MIX 500
Application: Glazier blocks are used to block rails of all types, up to 24 mm insulated
glass. For proper installation of glass panes.
Properties: High-impact plastic, slip-resistant and temperature-resistant. The glazier
blocks ensure that the glass edges do not come into contact with the frame.
Scope of supply:
100 x white 100 x 24 x 1 mm
100 x blue 100 x 24 x 2 mm
100 x red 100 x 24 x 3 mm
100 x yellow 100 x 24 x 4 mm
100 x green 100 x 24 x 5 mm
Note: These glazier blocks are also offered individually.
DG 2180
628303 500 Parts • 1

Adjustment blocks
Application: Adjustment blocks are used to orient, balance and support building
fabricated construction, rafters in the construction of roof trusses, substructures in
facade construction or in ceiling and wall paneling. The proper installation according
to RAL of doors and windows as well as the compensation for unevenness in the
entire roof area and when installing solar panels.
Note: These adjustment blocks are also offered as a set (assortment MIX 155).
DG 2180
Item no. Dimension Color Price per Package
100 pieces contents
6283380502 80 x 50 x 2 mm red • 500
6283380503 80 x 50 x 3 mm green • 500
6283380505 80 x 50 x 5 mm blue • 500
6283380507 80 x 50 x 7 mm black • 500
62833805010 80 x 50 x 10 mm gray • 500
62833805015 80 x 50 x 15 mm yellow • 250
62833805020 80 x 50 x 20 mm black • 250
Other dimensions can be delivered at short notice.
Assembly wedges
Application: Assembly wedges are used to orient, balance and support building
fabricated construction, rafters in the construction of roof trusses as well as sub-
structures in facade construction or in ceiling and wall paneling. The installation of
doors and windows. Compensation for unevenness in the entire roof area and when
installing solar panels.
resistant plastic.
Note: These assembly blocks are also offered as a set (assortment MIX 240).
without opening DG 2180

100 pieces contents
6283165 65 x 28 x 8 mm red • 1,000
6283190 90 x 43 x 15 mm gray • 924
62831140 140 x 43 x 25 mm black • 364
with opening DG 2180
100 pieces contents
6283270 70 x 35 x 10 mm yellow • 1,000
6283277 77 x 38 x 10 mm white • 1,000
Quickfix distance assembly blocks
Application: Quickfix spacing blocks are used to orient, balance and support build-
ing components. Main application areas include orienting building components in
pre-fabricated construction, rafters in the construction of roof trusses as well as sub-
structures in facade construction or in ceiling and wall paneling. The installation of
doors and windows. Compensation for unevenness in the entire roof area and when
installing solar panels.
resistant plastic. Also suitable for pre-screwed, fixed laths and rails, thanks to the
lower large opening.
Note: These Quickfix spacing blocks are also offered as a set (assortment MIX 250). DG 2180
100 pieces contents
6283480501 80 x 50 x 1 mm blue • 1,000
6283480502 80 x 50 x 2 mm white • 1,000
6283480503 80 x 50 x 3 mm red • 1,000
6283480504 80 x 50 x 4 mm black • 1,000
6283480505 80 x 50 x 5 mm green • 1,000
62834805010 80 x 50 x 10 mm yellow • 500
Glazier blocks
Application: Glazier blocks are used to block rails of all types, up to 24 mm insulated
glass. For proper installation of glass panes.
Properties: High-impact plastic, slip-resistant and temperature-resistant. The glazier
blocks ensure that the glass edges do not come into contact with the frame.
Note: These glazier blocks are also offered as a set (assortment MIX 500). DG 2180
100 pieces contents
62847100221 100 x 22 x 1 mm white • 1,000
62847100222 100 x 22 x 2 mm blue • 1,000
62847100223 100 x 22 x 3 mm red • 1,000
62847100224 100 x 22 x 4 mm yellow • 1,000
62847100225 100 x 22 x 5 mm green • 1,000
62847100226 100 x 22 x 6 mm black • 1,000
62847100241 100 x 24 x 1 mm white • 1,000
62847100242 100 x 24 x 2 mm blue • 1,000
62847100243 100 x 24 x 3 mm red • 1,000
62847100244 100 x 24 x 4 mm yellow • 1,000
62847100245 100 x 24 x 5 mm green • 1,000
62847100246 100 x 24 x 6 mm black • 1,000
Base plates for wooden construction
Application: Base plates are used to orient, compensate for and support building
components in wooden and metal construction. Main application areas include
orienting rafters and other supporting wooden components as well as compensating
for unevenness everywhere on a roof.
DG 2180
100 pieces contents
62835120502 120 x 50 x 2 mm red • 250
62835120503 120 x 50 x 3 mm green • 250
62835120505 120 x 50 x 5 mm blue • 250
628351205010 120 x 50 x 10 mm white • 100
628351205015 120 x 50 x 15 mm yellow • 100
62835160502 160 x 50 x 2 mm red • 250
62835160503 160 x 50 x 3 mm green • 250
62835160505 160 x 50 x 5 mm blue • 250
628351605010 160 x 50 x 10 mm white • 250

Pipe clamp OPZD without knock-in dowel
Application: The OPZD pipe clamps are used to fasten armored steel tubes
DIN 49020 and heavy insulation tubes DIN 49016.
Properties: Material - PP polypropylene (except for 621639 = PA nylon). Halogen and
silicone free, color gray RAL 7035. With a 6 mm elongated hole for easy installation
correction. Can be inserted into profile rails with 11 mm slot width and can be
stacked on most pipe clamps.
DG 2197
Item no. Type for cables for pipes Price per Package
100 pieces contents
621639 IEC16 IEC16, PG9, IRO13.5 15 - 16 mm / 5/8“ • 100
62163135 IEC20 IEC20, PG13.5, IRO19 20 - 21 mm • 100
6216523 IEC25 IEC25, IRO23 25 - 26 mm / 1“ • 50
6216529 IEC32 IEC32, IRO29 31 - 32 mm / 1 1/4“ • 50
6216536 IEC40 IEC40, IRO36 38 - 40 mm • 30
6216336 IEC50 IEC50 50 mm • 30
Pipe clamp TF with combi dowel Total Fixx
Application: The TF pipe clamps are used to fasten electrical installation pipes.
Properties: Material of clip: PP polypropylene, halogen and silicone free, color gray
RAL 7035. Material of dowel: Polyamide PA 6. With a 6 mm elongated hole for easy
installation correction. Can be stacked on most customary pipe clamps. With pre-
installed combi dowel Total Fixx.
Advantages:
- the TF pipe clamps are completely pre-installed with the unique Total Fixx combi
nation dowels, which expand in solid building materials like normal nail anchors
and anchor positively in perforated bricks or panel materials like knotted dowels
- great time savings compared to pipe clamps with external dowels and screws
DG 2197
Item no. Type for cables for pipes Hole Ø Price per Package
100 pieces contents
621979 TF-IEC16 IEC16, PG9, IRO13.5 15 - 16 mm / 5/8“ 6 mm • 100
62197135 TF-IEC20 IE120, PG13, 5, IRO19 20 - 21 mm 6 mm • 100
6219716 TF-PG16 IRO16 22 - 23 mm 6 mm • 100
6219725 TF-IEC25 IEC25, IRO23 25 - 26 mm / 1“ 6 mm • 100
Speedclip pipe clamp SCP with knock-in dowel
Application: The SCP speedclip pipe clips are used to fasten copper tubes and
DIN 49020 armored steel tubes and DIN 49016 heavy insulation tubes.
Properties: Material: Polyamide PA-6 halogen and silicone-free, color gray
RAL 7035. KIWA certified, UV resistant, temperature range -40 °C to +80 °C,
short-term +130 °C, fireproof according to UL94HB. With elongated hole for
easy installation correction.
Advantages:
- up to 50% time savings with pre-installed knock-in dowels compared to conven-
tional pipe clamps with external plastic dowels and screws
Knock-in dowel 6 x 40 DG 2197
Item no. Hole Ø for cables for cables/pipes Price per 100 pieces Package contents
6218718 6 mm PG 11 18 - 19 • 100
6218722 6 mm PG 13.5-16 - M 20 20 - 22 • 100
6218728 6 mm PG 21 - M 25 25 - 28 • 100
Knock-in dowel 6 x 50 DG 2197
Item no. Hole Ø for cables for cables/pipes Price per 100 pieces Package contents
6218735 6 mm PG 29 - M 32 32 - 38 • 50
6218742 6 mm PG 36 - M 40 40 - 47 • 50
6218754 6 mm PG 42 - M 50 48 - 54 • 25
Speedclip pipe clamp SCP without knock-in dowel
Application: The SCP speedclip pipe clips are used to fasten copper tubes and
DIN 49020 armored steel tubes and DIN 49016 heavy insulation tubes.
Properties: Material: Polyamide PA-6 halogen and silicone-free, color gray
RAL 7035. KIWA certified, UV resistant, temperature range -40 °C to +80 °C,
short-term +130 °C, fireproof according to UL94HB. With elongated hole for
easy installation correction.
DG 2197
Item no. Type for cables/pipes Price per 100 pieces Package contents
6219122 SCP 22 20 - 22 mm • 100
6219128 SCP 28 PG 25 - 28 mm • 50
Speedclip clamping brackets KKB
Application: The KKB speedclip clamping brackets are used to easily lay up to 16
3 x 1.5 mm cables per clamping bracket on concrete walls or ceilings by means of
impact installation.
Properties: Material: Polyamide PA-6, halogen and silicone free, color gray
RAL 7035. UV resistant, temperature range -40 °C to +80 °C, short-term +130 °C.
Fireproof (design F) according to VDE 0471 / DIN IEC 695 test temperature +695 °C.
(F design) great deal of security, thanks to impact- and shatter-proof nylon.
Pre-installed nail anchors make “one-hand installation” possible. Easy to open,
thanks to large, ripped lips.
Advantage:
- can easily replace cable ducts
DG 2197
Item no. Type Knock-in Flame Capacity, Price per Package
dowel resistance cable 3.0 x 1.5 100 pieces contents
621628 KKB 8 - no 8 • 100
6216216 KKB 16 - no 16 • 50
621628655 KKB 8/6x55 6 x 55 no 8 • 200
6216216655 KKB 16/6x55 6 x 55 no 16 • 100
621728655 KKB 8F/6x55 6 x 55 yes 8 • 200
6217216655 KKB 16F/6x55 6 x 55 yes 16 • 100
Speedclip multi-use clip KKS
Application: The KKS speedclip multi-use clips are used to easily lay up to 30
3 x 1.5 mm cables per multi-use clip on concrete walls or ceilings by means of
impact installation.
Properties: Material: PP polypropylene, gray RAL 7035. Design F polyamide
PA-6, halogen and silicone free. Color: gray RAL 7030. Temperature range -40 °C
to +80 °C, short-term +130 °C. Fireproof (design F) according to VDE 0471 /
DIN IEC 695 test temperature +695 °C (design F). Easy accessibility without tools.
Smooth closing mechanism. Pre-installed nail anchors make “one-hand installation”
possible. Base part for wall and ceiling installation.
Advantage:
- can easily replace cable ducts
DG 2197
Item no. Type Material Knock-in Flame Capacity, Price Package
dowel resistance cable 3.0 x 1.5 per 100 contents
pieces
6217415 KKS 15 Copolymer - - 15 • 100
6217430 KKS 30 Copolymer - - 30 • 50
6216115 KKS 15/6x55 Copolymer 6 x 55 - 15 • 100
6216130 KKS 30/6x55 Copolymer 6 x 55 - 30 • 50
6217315 KKS 15/6x55 Copolymer 6 x 55 yes 15 • 100
6217330 KKS 30/6x55 Copolymer 6 x 55 yes 30 • 50

Nail clamps
Application: Nail clamps are used to easily lay cables.

Properties: Material: Polyethylene, color: gray RAL 7035. Temperature resistance
-30 °C to +67 °C. Complete with galvanized, hardened steel nails.
Clamping range 4 - 7 mm DG 2197

Item no. Nail length Price per 100 pieces Package contents
62166147 25 mm • 100
Clamping range 7 - 11 mm DG 2197

Item no. Nail length Price per 100 pieces Package contents
621660711 25 mm • 100
621662711 35 mm • 100
Snap-on loops STS
Application: The STS snap-on loops are used to easily lay individual cables or
bundles of cables to concrete, sand-lime brick and aerated concrete. For power
cables of 3 - 40 mm.
Properties: Material: Polyamide PA-6, halogen and silicone free, UV resistant, gray.
Temperature range -40 °C to +80 °C, short-term +130 °C. Fireproof according to
UL 94 HB. Quick and easy fastening - just insert bores and loops. Borehole depth
35 mm - 65 mm depending on cable diameter and quantity.
DG 2197
Item no. Type Hole Ø Capacity Price per Package
100 pieces contents
62184313 STS 3-13 6 mm 3 - 13 mm • 200
621841328 STS 13-28 6 mm 13 - 28 mm • 100
621842840 STS 28-40 6 mm 28 - 40 mm • 50
Plug-in hook STD
Application: The STD double plug-in hooks are used to fasten one or two cables
with 4 - 12 mm diameters.
Properties: Material: Polyamide PA-6, halogen and silicone free, color gray
RAL 7035. Temperature range -40 °C to +80 °C, short-term +130 °C. UV resistant.
Fireproof according to UL 94 HB. Quick and easy fastening - just insert bores
and hooks.
DG 2197
Item no. Type Hole Ø for cables Price per Package
100 pieces contents
62195412 STD 4-12 6 mm 4 - 12 mm • 200
Clamping disks KLS
Application: The KLS clamping disks are used to fasten multiple cables in one work
step. Primarily in wall grooves before plastering and under insulation material.
Properties: Material: Polypropylene, natural color. Complete with pre-installed,
galvanized, hardened steel nails.
Washers Ø 34 mm DG 2197

Item no. Nail Ø x length Price per 100 pieces Package contents
62193343340 3.3 x 40 mm • 150
62193343350 3.3 x 50 mm • 150
62193343360 3.3 x 60 mm • 100
Cable ties, nylon 6.6 natural
Application: Cable ties are primarily used to fasten and fix individual cables and
entire cable strands, but also to permanently or temporarily fasten many objects
used in the skilled crafts and industry.
Properties: Material: Nylon PA 6.6 natural color, halogen free, silicone free. Tem-
perature range -40 °C to +85 °C. Flammability according to UL94 V-2, UL approv-
al. Elastic retaining teeth ensure a secure hold in the cable tie head and cannot be
opened without being destroyed. Rounded edges prevent damage to the cables.
DG 8331
Item no. Dimension max. bundle Ø min. load- Price per Package
bearing capacity 100 pieces contents
8316122100 100 x 2.5 mm 21 mm 8 kg • 100
8316122140 140 x 2.5 mm 34 mm 8 kg • 100
8316122200 202 x 2.5 mm 55 mm 8 kg • 100
8316123150 150 x 3.3 mm 38 mm 18 kg • 100
8316123210 201 x 3.3 mm 54 mm 18 kg • 100
8316123250 255 x 3.7 mm 70 mm 18 kg • 100
8316123300 290 x 3.3 mm 82 mm 18 kg • 100
8316124160 157 x 4.8 mm 40 mm 22 kg • 100
8316124200 199 x 4.5 mm 54 mm 22 kg • 100
8316124280 288 x 4.5 mm 84 mm 22 kg • 100
8316124370 371 x 4.5 mm 106 mm 22 kg • 100
8316124430 430 x 4.5 mm 125 mm 22 kg • 100
8316127200 200 x 7.6 mm 54 mm 54 kg • 100
8316127380 370 x 7.2 mm 106 mm 54 kg • 100
8316128450 450 x 7.2 mm 130 mm 54 kg • 100
8316128550 541 x 7.2 mm 160 mm 54 kg • 100
8316129760 774 x 8.8 mm 220 mm 79 kg • 100
8316120730 724 x 12.5 mm 216 mm 114 kg • 100

Cable tie, nylon 6.6, black
Properties: Material: Nylon PA 6.6 black color, halogen free, silicone free and
UV resistant. Temperature range -40 °C to +85 °C. Flammability according to
UL94 V-2, UL approval. Elastic retaining teeth ensure a secure hold in the cable
tie head and cannot be opened without being destroyed. Rounded edges prevent
damage to the cables.
DG 8331
8316132100 100 x 2.5 mm 21 mm 8 kg • 100
8316132140 140 x 2.5 mm 34 mm 8 kg • 100
8316132200 202 x 2.5 mm 55 mm 8 kg • 100
8316133150 150 x 3.3 mm 38 mm 18 kg • 100
8316133210 201 x 3.3 mm 54 mm 18 kg • 100
8316133250 255 x 3.7 mm 70 mm 18 kg • 100
8316133300 290 x 3.3 mm 82 mm 18 kg • 100
8316134160 157 x 4.8 mm 40 mm 22 kg • 100
8316134200 199 x 4.5 mm 54 mm 22 kg • 100
8316134280 288 x 4.5 mm 84 mm 22 kg • 100
8316134370 371 x 4.5 mm 106 mm 22 kg • 100
8316134430 430 x 4.5 mm 125 mm 22 kg • 100
8316137200 200 x 7.6 mm 54 mm 54 kg • 100
8316137380 370 x 7.2 mm 106 mm 54 kg • 100
8316138450 450 x 7.2 mm 130 mm 54 kg • 100
8316138550 541 x 7.2 mm 160 mm 54 kg • 100
8316139760 774 x 8.8 mm 220 mm 79 kg • 100
8316130730 724 x 12.5 mm 216 mm 114 kg • 100
Cable ties with metal tongue 6.6 natural
Approvals: UL, Germanischer Lloyd, Lloyd’s Register of Shipping, Bureau Veritas

and MIL.
Properties: Material: nylon PA 6.6, natural color, halogen free, silicone free.
Temperature resistance: -40 °C to +85 °C. Flammability class UL 94 V-2.
The corrosion-resistant, anti-magnetic steel tongue in the cable tie head
guarantees a very strong and secure hold, even in adverse conditions such as
high air humidity, heat or cold.
Advantages:
- the steel tongue guarantees a stronger and more secure hold
- numerous approvals
DG 8331
831622290 92 x 2.4 mm 16 mm 8 kg • 1,000
8316222200 203 x 2.4 mm 50 mm 8 kg • 1,000
8316223140 140 x 3.6 mm 29 mm 18 kg • 1,000
8316224190 186 x 4.8 mm 45 mm 22 kg • 1,000
8316224360 361 x 4.8 mm 102 mm 22 kg • 1,000
8316226340 340 x 6.9 mm 90 mm 54 kg • 500
Cable ties with metal tongue 6.6 black
Approvals: UL, Germanischer Lloyd, Lloyd’s Register of Shipping, Bureau Veritas

and MIL.
Properties: Material: nylon PA 6.6, color: black, UV resistant, halogen free,
silicone free. Temperature resistance: -40 °C to +85 °C. Flammability class
UL 94 V-2. The corrosion-resistant, anti-magnetic steel tongue in the cable tie
head guarantees a very strong and secure hold, even in adverse conditions
such as high air humidity, heat or cold.
Advantages:
- the steel tongue guarantees a stronger and more secure hold
- numerous approvals
DG 8331
831623290 92 x 2.4 mm 16 mm 8 kg • 1,000
8316232200 203 x 2.4 mm 50 mm 8 kg • 1,000
8316233140 140 x 3.6 mm 29 mm 18 kg • 1,000
8316234190 186 x 4.8 mm 45 mm 22 kg • 1,000
8316234360 361 x 4.8 mm 102 mm 22 kg • 1,000
8316236340 340 x 6.9 mm 90 mm 54 kg • 500
Cable tie/fastening element
Application: Mounting bases are used to fasten and fix cable ties to smooth surfaces.
Properties: Material - PA polyamide 6.6, halogen free and UV stabilized (black
design). Temperature range - base -40 °C to +85 °C, adhesive -10 °C to +65 °C.
Suitable for adhering and/or screwing in (19 mm only for adhering).
natural
Item no. Type Dimension Assembly for clips up to Price per Package
hole width 100 pieces contents
622021919 SN1 19 x 19 mm only for 4.5 mm • 100
bonding
622022828 SN2 28 x 28 mm 6 mm 5.5 mm • 100
black
Item no. Type Dimension Assembly for clips up to Price per Package
hole width 100 pieces contents
622031919 SNX1 19 x 19 mm only for 4.5 mm • 100
bonding
622032828 SNX2 28 x 28 mm 6 mm 5.5 mm • 100

Lamella nails for cable ties
Application: The lamella nails are used to fasten cable ties to ceilings or walls.
Properties: The dimension 8 mm is UV resistant. Quick and easy fastening - only
insert bores and nails.
Plastic DG 2125
Item no. Dimension Color Hole Ø Price per Package
100 pieces contents
62166640 6 x 40 mm gray 6 mm • 200
62166835 8 x 35 mm black 8 mm • 200
Fixpins - impact nail, hardened in a salt bath
Application: Fixpins are used to fasten tubes or cables to concrete before the screed
is applied. Fixpins 14 and 18 mm for direct installation of clamps and perforated tape
on concrete for electric and heating installations. Fixpins 18 and 22 mm for direct
installation of resin, spring and storm anchors.
Properties: Made of special electrical steel with a high carbon content. Special
hardening process in a salt bath for extremely high toughness and fracture strength
(SEC predicate). Quick, time-saving installation thanks to simple driving in with
setting tools and hand hammer. No pre-drilling required. The design with a standard
collar has a smooth shaft, the one with a wide collar has a ribbed shaft for even
better adhesion in the substrate.
Note: Only handle fixpins with appropriate setting tools.
with small collar DG 2197

Item no. Dimension Price per 100 pieces Package contents
6259818 4 x 18 mm • 200
with wide collar DG 2197

6259918 4 x 18 mm • 200
Fixpin - impact nail, hardened in an oil bath
Application: Fixpins are used to fasten tubes or cables to concrete before the screed
is applied. Fixpins 14 and 18 mm for direct installation of clamps and perforated tape
on concrete for electric and heating installations. Fixpins 18 and 22 mm for direct
installation of resin, spring and storm anchors.
Properties: Made of special electrical steel with a high carbon content and hardened
in an oil bath. Quick, time-saving installation thanks to simple driving in with setting
tools and hand hammer. No pre-drilling required. The design with a standard col-
lar has a smooth shaft, the one with a wide collar has a ribbed shaft for even better
adhesion in the substrate.
Note: Only handle fixpins with appropriate setting tools.
with small collar DG 2197

6260318 4 x 18 mm • 200
with wide collar DG 2197

6260418 4 x 18 mm • 200
Fixpin setting tools
Application: For driving fixpins into concrete.

Properties: Made of tool steel with very high quality (DIN 7255 safety standard).
Suitable for all fixpin types except for fixpins with predetermined breaking points.
DG 2087
Item no. Type Price per 100 pieces Package contents
62600 black, for all fixpin types, • 1
except for fixpins with a
predetermined breaking point
Metal clips
Application: Metal clips are used to fasten pipes and cables to concrete with fixpin
impact nails.
DG 2197
Item no. Nominal size for pipes/cables Price per 100 pieces Package contents
6259620 20 mm ICE20 / 19 - 20 mm • 200
6259624 24 mm 23 - 24 mm • 150
Punched mounting strip
Application: Punched mounting strips can be used for many different applications.
The main application area is fastening pipes and cables to concrete as well as for
suspensions for pipes from concrete ceilings.
Properties: Flexible length selection.
galvanized DG 2193
Item no. Dimension for screws Ø in rolls a Price per piece Package contents
6213512 12 x 0.75 mm 5 mm 10 m • 10
6213517 17 x 0.75 mm 6 mm 10 m • 10
6213525 25 x 0.75 mm 8 mm 10 m • 10
galvanized
plastic-coated DG 2193
Item no. Dimension for screws Ø in rolls a Price per piece Package contents
6213714 14 x 3 mm 6 mm 10 m • 1
6213718 18.5 x 3 mm 6 mm 10 m • 1
6213727 27 x 3 mm 8 mm 10 m • 1

Fischer pipe hanger RAH
Application: The RAH pipe hangers with internal thread serve as connecting
elements for pipe suspensions.
Properties: Made of galvanically zinc-plated cast iron.
galvanized DG 2225
Item no. Type Thread Hole Ø Price per 100 pieces Package contents
625938 RAH M 8 M8 8.5 mm • 50
6259310 RAH M 10 M 10 10.5 mm • 50
Suspension eyes
Application: The pipe hangers with internal thread serve as connecting elements for
pipe suspensions.
Properties: Made of die-cast zinc (anti-corrosion, similar to galvanized material).
Die-cast zinc DG 2225

Item no. Type Thread clear ring span Overall length Price per 100 pieces Package contents
621381 R 10/6 M6 10 mm 28 mm • 100
621382 R 15/8 M8 15 mm 35 mm • 100
Suspension hook
Application: The suspension hooks with internal thread serve as connecting

elements for light suspensions.
Properties: Made of galvanized cast iron.
galvanized
Cast iron DG 2225
Item no. Type Thread clear hook span Overall length Price per 100 pieces Package contents
621383 AH 10/6 M6 10 mm 28 mm • 100
Fischer trapezoidal sheet metal fastener TZH
Application: The TZH profile suspending brackets are used to suspend pipes,
cable lines, ventilation ducts and much more from sheet metal roofs.
Properties: With predetermined breaking points for easy adjustment to different
trapezoidal sheet metal forms.
Simple subsequent height adjustment using an adjustment nut.
Note: We recommend the Fischer LZ punch for punching holes.
Approx. 100 mm
galvanized DG 2248 variable flexibility
Item no. Type Thread Price per 100 Package

pieces contents
626018 TZH 8 M8 • 100
Twistable height
adjustment
1 2 3 4 5 6 7 8
Fischer punch LZ
Application: For punching the installation holes for the Fischer TZH trapezoidal sheet
metal fastener.
DG 2222
Item no. Type Price per piece Package contents
626021 LZ • 1
MTH Nova Grip clamping plates
Approved by the building authorities: Building Standards Approval Z-14.4-493 for

connections of intersecting double-T beams M10 to M24.
Application: MTH Nova Grips are used to connect double-T beams in a cross con-
nection in steel, crane, building and underground construction. For fastening photo-
voltaic modules for solar power plants.
Properties: Material - heat-treated steel C 45+N drop forged and galvanically zinc-
plated and hot-dip galvanized. Ideal design makes minor leveling corrections pos-
sible without problems. Easy to remove again at any time. Time saving installation
without drilling and welding work.
galvanized DG 2245
Item no. Thread Price per Package
piece contents
624768 M8 • 1
6247610 M 10 • 200
6247612 M 12 • 200
6247712 M 12 LA long press-on leg • 1
6247812 M 12 LAS long press-on leg, • 1
high bearing leg
6247616 M 16 • 1
6247716 M 16 RF long press-on leg • 1
6247620 M 20 • 1
6247624 M 24 • 1
hot-dip galvanized
Item no. Thread Price per Package
piece contents
6247910 M 10 • 1
6247912 M 12 • 1
i Size table for MTH clamping plates

Clamping plate a b Rating Reaction Preload force of Tightening torque Transferable
force the 8.8 screw McS2 lubricated H forces u=0.1
for screw mm mm P (kN) B (kN) A (kN) Mv (Nm) H (kN)
M8 17.0 13.5 3.20 4.00 7.20 11.00 0.32
M 10 17.0 13.5 5.15 6.48 11.63 16.47 0.52
M 12 LA 30.0 16.0 5.31 6.71 12.11 19.05 0.62
M 12 20.0 16.0 7.50 9.37 16.81 28.37 0.75
M 16 27.0 21.0 12.55 16.13 28.68 63.76 1.26
M 20 34.0 26.0 21.25 27.28 49.03 137.26 2.13
M 24 41.0 31.0 25.96 34.34 60.30 202.45 2.60
i Size table for clamping plates (MTH support brackets)

Screw a b c d f g i Øt
M8 36 32 16 13 15 8 20 9
M 10 36 32 16 13 15 8 20 11
M 12 43 38 19 17 18 10 23 13
M 12 LA 53 38 19 27 18 9 23 13
M 12 LAS 53 38 19 27 33 24 38 13
M 16 57 50 25 20 23 12 30 17
M 16 RF 82 50 31 41 23 12 34 17
M 20 71 63 31 25 30 16 38 21
M 24 86 76 38 30 34 17 43 25

BTS girder clamp TKN
Application: Beam clamps make it possible to easily fasten objects to steel beams
by clamping. Primary application areas are sprinkler systems, heating, ventilation
and air conditioning construction, acoustic construction, electric, pipe and sanitary
installations, machine and steel construction.
Properties: Material: Body of tempered cast iron, galvanically zinc-plated
with hexagon screw 6 DIN 933 8.8, screw end with ring cut (CP) according to
EN ISO 4753 and lock nut DIN 439.
Advantages:
- high load capacity
- quick and simple height adjustment
- height adjustment for through also possible at a later time
- fastening to steel beams without welding and drilling
DG 2245
Item no. Type a b c d e f g h Nomi- Certifi- Price per Pack-
nal cate 100 pieces age
load con-
tents
624750086 TKN8 / M 6 21 19 35 M6 35 M8 18 38 1200 UL • 1
mm mm mm mm mm mm Nm
624750087 TKN8 / 7 21 19 35 7 mm 35 M8 18 38 1200 UL • 1
mm mm mm mm mm mm mm Nm
624750088 TKN8 / M 8 21 19 35 M8 35 M8 18 38 1200 VdS, UL • 1
624750089 TKN8 / 9 21 19 35 9 mm 35 M8 18 38 1200 VdS, UL • 1
mm mm mm mm mm mm mm Nm
6247500106 TK10 / M 6 29 21 45 M6 41 M 10 23 50 2500 UL • 1
6247500107 TK10 / 7 mm 29 21 45 7 mm 41 M 10 23 50 2500 UL • 1
6247500108 TK10 / M 8 29 21 45 M8 41 M 10 23 50 2500 VdS, UL • 1
6247500109 TK10 / 9 mm 29 21 45 9 mm 41 M 10 23 50 2500 VdS, UL • 1
62475001010 TKN10 / 23 21 42 M 10 41 M 10 20 44 2500 VdS, UL, • 1
M 10 mm mm mm mm mm mm Nm FM
62475001011 TKN10 / 23 21 42 11 41 M 10 20 44 2500 VdS, UL, • 1
11 mm mm mm mm mm mm mm mm Nm FM
62475001212 TK12 / M 12 35 23.5 54 M 12 48 M 10 26 58 3500 VdS, UL, • 1
mm mm mm mm mm mm Nm FM
62475001213 TK12 / 35 23.5 54 13 48 M 10 26 58 3500 VdS, UL, • 1
62475001610 TK16 / M 10 30 29.5 58 M 10 55.5 M 12 28 58.3 5500 VdS, UL, • 1
62475001616 TK16 / M 16 30 29.5 58 M 16 55.5 M 12 28 58.3 5500 VdS, UL, • 1
62475001617 TK16 / 30 29.5 58 17 55.5 M 12 28 58.3 5500 VdS, UL, • 1
Fischer FGRS-Plus hinged pipe clamps
Application: The one-piece Fischer FGRS Plus hinged pipe clamps are used to
install pipes used for sanitary and heating purposes.
Properties: Soundproof according to DIN 4109, fire behavior according to DIN 4102
class B 2. Temperature resistant from -50 °C to +110 °C. One-piece with patented
quick-release fastener and resetting mechanism. One-hand installation is possible
without difficulty. Time- and energy-saving insertion for overhead installation. After it
engages, the pipe is pre-installed and can be adjusted easily.
DG 2211
Item no. Type Nominal Clamping Con- max. Price Package
size range nection recom- per 100 contents
thread mended pieces
static load
(straight
lift)
621581215 FGRS-Plus 12-15 1/4” 12 - 15 mm M8 0.65 N • 100
621581519 FGRS-Plus 15-19 3/8” 15 - 19 mm M8 0.65 N • 100
621582024 FGRS-Plus 20-24 1/2” 20 - 24 mm M8 0.65 N • 100
621582530 FGRS-Plus 25-30 3/4” 25 - 30 mm M8 0.65 N • 100
621583237 FGRS-Plus 32-37 1” 32 - 37 mm M8 0.65 N • 100
621584045 FGRS-Plus 40-45 1 1/4” 40 - 45 mm M8 0.90 N • 50
621584853 FGRS-Plus 48-53 1 1/2” 48 - 53 mm M8 0.90 N • 50
621585458 FGRS-Plus 54-58 - 54 - 58 mm M8 0.90 N • 50
621585963 FGRS-Plus 59-63 2” 59 - 63 mm M8 0.90 N • 50
1 2 3 4

Fischer FRS-Plus pipe clamps
Application: The two-part FRS Plus pipe clamps are used for installing pipes for san-
itary and heating purposes as well as for sewage pipes on walls, floors and ceilings.
Properties: Soundproof according to DIN 4109, fire behavior according to DIN 4102
class B 2. Temperature resistant from -50 °C to +110 °C. 2-part with patented quick-
release fastener. Combined connection thread M 8/M 10 for flexibility on the con-
struction site. After it engages, the pipe is pre-installed and can be adjusted easily.
Time- and energy-saving insertion for overhead installation.
Note: The two clamps 133-141 and 159-162 are Fischer FRS type but essentially
correspond to the FRS Plus clamps.
DG 2213
Item no. Type Nominal Clamping Connection max. Price Package
size range thread recom- per 100 contents
mended pieces
static
load
(straight
lift)
621571215 FRS-Plus 12-15 1/4” 12 - 15 mm M 8 / M 10 0.8 kN • 100
621571519 FRS-Plus 15-19 3/8” 15 - 19 mm M 8 / M 10 0.8 kN • 100
621572024 FRS-Plus 20-24 1/2” 20 - 24 mm M 8 / M 10 0.8 kN • 100
621572530 FRS-Plus 25-30 3/4” 25 - 30 mm M 8 / M 10 0.8 kN • 100
621573237 FRS-Plus 32-37 1” 32 - 37 mm M 8 / M 10 0.8 kN • 100
621574045 FRS-Plus 40-45 1 1/4” 40 - 45 mm M 8 / M 10 0.8 kN • 50
621574853 FRS-Plus 48-53 1 1/2” 48 - 53 mm M 8 / M 10 0.8 kN • 50
621575458 FRS-Plus 54-58 - 54 - 58 mm M 8 / M 10 0.8 kN • 50
621575963 FRS-Plus 59-63 2” 59 - 63 mm M 8 / M 10 1.5 kN • 50
621576264 FRS-Plus 62-64 - 62 - 64 mm M 8 / M 10 1.5 kN • 25
621576873 FRS-Plus 68-73 - 68 - 73 mm M 8 / M 10 1.5 kN • 25
621577478 FRS-Plus 74-78 2 1/2” 74 - 78 mm M 8 / M 10 1.5 kN • 25
621578286 FRS-Plus 80-86 - 80 - 86 mm M 8 / M 10 1.5 kN • 25
621573 FRS-Plus 87-92 - 87 - 92 mm M 8 / M 10 1.5 kN • 25
6215795103 FRS-Plus 95-103 - 95 - 103 mm M 8 / M 10 1.5 kN • 25
62157108116 FRS-Plus 108-116 4” 108 - 116 mm M 8 / M 10 1.5 kN • 20
62614133141 FRS 133-141 5” 133 - 141 mm M 8 / M 10 2 kN • 10
62614159162 FRS 159-162 - 159 - 162 mm M 8 / M 10 2 kN • 8
1 2 3 4
Fischer mounting rails MS
Application: The Fischer MS mounting rails are used for the horizontal and vertical
installation of brackets as well as producing cross beams, brackets and supporting
frames of all kinds.
Properties: High flexibility thanks to standardized hole geometry. Easy to cut to
length and install thanks to recessed contact spacing on the rail side.
Note: For secure fastening, we recommend Fischer rail fasteners FNA II.
galvanized DG 2224
Item no. Profile Length Price per Package
piece contents
625592718 27 x 18 x 1.25 mm 2,000 mm • 1
625592830 28 x 30 x 1.75 mm 2,000 mm • 1
625593840 38 x 40 x 2 mm 2,000 mm • 1
6261238403 38 x 40 x 2 mm 3.000 mm • 1
We can send you further information on request.
1 2
Profile 27/18 mm Profile 28/30 mm Profile 38/40 mm
3 4
Fischer mounting rails FUS
Application: The Fischer FUS mounting rails are used for the horizontal and vertical
installation of brackets as well as producing cross beams, brackets and supporting
frames of all kinds.
Properties: Secure hold of sliding nuts thanks to tooth arrangement on the profile
rails. Easy to cut to length and install thanks to recessed contact spacing on the rail
side. Optimized profile cross-section ensures increased bending strength and pull-
out resistance.
Note: For secure fastening, we recommend Fischer FNA II rail fasteners.
galvanized DG 2224
Item no. Profile Length Price per Package
piece contents
6261341212 41 x 21 x 2 mm 2.000 mm • 1
1 2
3 4

Fischer assembly bracket MW
Application: The Fischer MW mounting brackets are used for bracing and manufac-
turing rail supporting structures, cross beams or overhangs.
Properties: Variable mounting options. Installation advantages when manufacturing
structures in conjunction with Fischer mounting rails.
galvanized DG 2225
Item no. Type Dimen-
suitable Price Package
sion
for proper contents
files piece
625652790 MW 27-90 75 x 80 x 27/18 + • 25
25 mm 28/30 mm
625653890 MW 38-90 85 x 105 x 38/40 mm • 20
40 mm
Fischer universal bracket UWS
Application: The Fischer UWS angle brackets are used for bracing and manufac
turing rail supporting structures, cross beams or overhangs.
Properties: Flexible structural element with the option for horizontal or vertical
orientation. Very high stability.
Note: The Fischer universal brackets should be used in pairs.
galvanized DG 2225
Item no. Type Dimen- suitable Price per Package
sion for profiles piece contents
62614 UWS 135 x 135 38/40 + • 10
x 42 x 41/41 +
4 mm 40/60 +
40/120 mm
Sliding nuts FCN
Application: The Fischer FCN sliding nuts serve as fastening elements for pipe
clamps with M 8 internal thread to mounting rails or brackets.
Properties: With two longitudinal grooves that ensure a secure hold in the toothed
Fischer FUS profile rails.
Installation instructions: Insert into the rail and rotate 90°.
galvanized DG 2225
Item no. Type Thread Dimen- suitable Price Package
sion for proper 100 contents
files pieces
626098 FCN 8 M8 35 x FUS 21/41 • 100
20/8 mm +62
Profiles
Sliding nuts Clix MK
Application: The Fischer Clix MK sliding nuts serve as fastening elements for pipe
clamps with M 8 and M 10 internal thread to mounting rails or brackets.
Installation instructions: Insert into the rail, rotate 90° and then secure with a nut.
DG 2225
Item no. Type Thread Dimen- suitable for Price Package
sion contents
626108 Clix M 8 54 x 28 x 27/18, 28/30 • 100
M8 1.5 mm MS Profile
6261010 Clix M 10 54 x 28 x 27/18, 28/30 • 100
M 10 1.5 mm MS Profile
1 2 3
4 5
Fischer sliding nuts SM
Application: The Fischer SM sliding nuts are used to fasten threaded pins or thread-
ed rods M 8 and M 10 to mounting rails or brackets.
Installation instructions: After the threaded plate is oriented, it should be secured
against unintentional loosening using a nut.
galvanized DG 2225
Item no. Type Thread Dimension suitable for Price per Package
100 pieces contents
625698 SM 38 M 8 M8 33 x 23 x 6 mm 27/18, 28/30, 38/40, • 50
40/60 MS Profile
6256910 SM 38 M 10 M 10 33 x 23 x 6 mm 27/18, 28/30, 38/40, • 50
40/60 MS Profile
Fischer T-head threaded plate HG 27
Application: The Fischer HG T-head threaded plates are used to fasten threaded
rods or T-bolts M 8 to mounting rails or brackets.
Installation instructions: After the threaded plate is oriented, it should be secured
against unintentional loosening using a nut.
galvanized DG 2225
Item no. Type Thread Dimension suitable for Price per Package
100 pieces contents
625688 HG 27 M 8 M8 22 x 13 x 5 MS 27/18, 28/30 mm • 50
profiles

Fischer T-bolts FHS CLIX N
Application: The patented Fischer FHS Clix N T-head bolts are used as fastening
elements for pipe clamps with M 8 internal threads to mounting rails or brackets.
Properties: Complete with captive threaded plate. Simple, quick one-hand instal
lation as well as later installation in the rail possible. Easy height correction thanks to
easily separable grooved pin.
Advantages:
- easy height correction
- the grooved pin can be adjusted to the correct length using a bolt cutter
galvanized DG 2225
Item no. Type Thread Length suitable for Price per Package
profiles 100 pieces contents
62569890 FHS CLIX-N 8/90 M8 90 mm for all profiles • 50
625698140 FHS CLIX-N 8/140 M8 140 mm with 15 mm • 50
625698190 FHS CLIX-N 8/190 M8 190 mm Slot width • 50
1 2 3 4
5 6 7 8
Fischer washer U
Application: For installation on Fischer profile rails.

Properties: Particularly large external diameter for covering slits in the
mounting rails.
galvanized DG 2225
Item no. Inside Ø Outside Ø Thickness Price per 100 pieces Package
contents
62595840 8.4 mm 40 mm 3 mm • 100
625951040 10.5 mm 40 mm 3 mm • 100
Fischer reduction sleeves - reducers
Application: The Fischer reducers or reduction sleeves RD and RDM are used to
reduce or to enlarge threaded connections.
Properties: The RDM sleeves reduce 2 external threads, the RD reducers reduce
internal and external threads.
galvanized DG 2225
Item no. Type Thread Price per 100 pieces Package
contents
62590810 RDM 10/8 Internal thread M 10 / M 8 • 50
625911210 RDM 12/10 Internal thread M 12, • 100
External thread M 10
Special article for Wood connector
carpentry work in
wooden construction
Gutzeit perforated plates
Application: There are many possible applications for perforated plates in wooden
construction. Perforated plates are preferably used for creating valley rafters or when
building framework.
Installation instructions: The perforated plates are fastened with anchor nails
4 mm Ø or with screws. 2 perforated plates are recommended for each connection.
hot-dip galvanized DG 2185

Item no. Dimension Number of holes x Price per 100 pieces Package
hole Ø contents
6278260140 60 x 140 x 2 mm 5 mm / 21 • 100
6278260200 60 x 200 x 2 mm 5 mm / 30 • 50
6278260240 60 x 240 x 2 mm 5 mm / 36 • 50
6278280200 80 x 200 x 2 mm 5 mm / 40 • 50
6278280240 80 x 240 x 2 mm 5 mm / 48 • 50
6278280300 80 x 300 x 2 mm 5 mm / 60 • 25
62782100140 100 x 140 x 2 mm 5 mm / 35 • 50
62782100200 100 x 200 x 2 mm 5 mm / 50 • 50
62782100240 100 x 240 x 2 mm 5 mm / 60 • 50
62782100300 100 x 300 x 2 mm 5 mm / 75 • 25
62782120200 120 x 200 x 2 mm 5 mm / 60 • 50
62782120240 120 x 240 x 2 mm 5 mm / 72 • 25
62782120300 120 x 300 x 2 mm 5 mm / 90 • 25
62782200300 200 x 300 x 2 mm 5 mm / 150 • 1
Gutzeit perforated plate strips
Application: There are many possible applications for perforated plate strips in
wooden construction. Perforated plate strips are preferably used in places where
structural stability, force transmission and diversion of wind suction forces are
required.
Installation instructions: The perforated plate stripes are fastened with anchor
nails 4 mm Ø or with screws. 2 perforated plate strips are recommended for each
connection.

Item no. Dimension Number of holes x Price per 100 pieces Package
hole Ø contents
6279660 60 x 1.200 x 2 mm 5 mm / 180 • 1
6279680 80 x 1.200 x 2 mm 5 mm / 240 • 1
62796100 100 x 1.200 x 2 mm 5 mm / 300 • 1
62796120 120 x 1.200 x 2 mm 5 mm / 360 • 1
62796140 140 x 1.200 x 2 mm 5 mm / 420 • 1
62796160 160 x 1.200 x 2 mm 5 mm / 480 • 1
62796200 200 x 1.200 x 2 mm 5 mm / 600 • 1
62796240 240 x 1.200 x 2 mm 5 mm / 720 • 1
Gutzeit flat connector
Application: There are many possible applications for flat connectors in wooden
construction. Flat connectors are preferably used as a replacement for post stand
connections made by carpenters as well as primarily in framework stand construc-
tion where structural stability, force transmission and diversion of wind suction forces
are required.
Installation instructions: The flat connectors are fastened with anchor nails 4 mm Ø
and/or with screws. 2 flat connectors are recommended for each connection.

Item no. Dimension Number of holes x hole Ø Price per Package
100 pieces contents
6279413555 55 x 155 x 2.5 mm 5 mm / 20 - 13 mm / 2 • 50
6279417565 65 x 175 x 2.5 mm 5 mm / 20 - 13 mm / 2 • 50
6279420090 90 x 200 x 3 mm 5 mm / 32 - 13 mm / 4 • 50
Gutzeit bracket connector
Approved by the building authorities: European Technical Approval ETA 09/0133

without beading and ETA 09/ 0134 with beading (except for item no. 623149).
Application: There are many possible applications for bracket connectors with and
without reinforcement beading in wooden construction. Bracket connectors are
preferably used for fastening square timbers to masonry and concrete as well as for
wood/wood connections. With greater demands on the product, using the types with
reinforcement beading is recommended.
Installation instructions: The bracket connectors are fastened with anchor nails
4 mm Ø in load carrying capacity class 3 C. Fastening through the 13 mm holes
in the masonry, concrete or wood is done with suitable dowels and screws or bolts.
Further details according to DIN 1052 or the technical documents of the manufac-
turer.
Note: The brackets with item no. 623149 are not included in the approval.

Item no. Dimensions Number of holes x hole Ø Price per Package
axbxcxd 100 pieces c
ontents
623149 40 x 40 x 40 x 2 mm 5 mm / 6 • 100
627815050 50 x 50 x 35 x 2.5 mm 5 mm / 8 - 11 mm / 2 • 150
6278170 70 x 70 x 55 x 2.5 mm 5 mm / 20 - 13 mm / 2 • 100
6278070 70 x 70 x 55 x 2.5* mm 5 mm / 20 - 13 mm / 2 • 100
627819090 90 x 90 x 40 x 3 mm 5 mm / 16 - 11 mm / 4 • 100
6278190 90 x 90 x 65 x 2.5 mm 5 mm / 20 - 13 mm / 2 • 100
6278090 90 x 90 x 65 x 2.5* mm 5 mm / 20 - 13 mm / 2 • 100
62781105 105 x 105 x 90 x 3 mm 5 mm / 32 - 13 mm / 4 • 50
62780105 105 x 105 x 90 x 3* mm 5 mm / 24 - 13 mm / 4 • 50
*) with reinforcement beading.

Gutzeit perforated plate bracket, isosceles

(except for item no. 627834020).
Application: Perforated plate brackets are can be used versatilely where low
demands are made regarding the forces to be connected. Main application areas
include cross connections, replacements and beam/support connections.
Installation instructions: The perforate plate brackets are fastened with anchor nails
4 mm Ø in load carrying capacity class 3 C.
Note: The brackets with item no. 627834020 are not included in the approval.

Item no. Dimensions a x b x c x d Number of holes x hole Ø Price per 100 pieces Package
c
ontents
627834020 40 x 40 x 20 x 2 mm 5 mm / 4 • 100
627834040 40 x 40 x 40 x 2 mm 5 mm / 8 • 100
627835040 50 x 40 x 40 x 2 mm 5 mm / 8 • 100
627836040 60 x 60 x 40 x 2 mm 5 mm / 12 • 100
627836060 60 x 60 x 60 x 2 mm 5 mm / 18 • 100
627836080 60 x 60 x 80 x 2.5 mm 5 mm / 24 • 50
6278360100 60 x 60 x 100 x 2.5 mm 5 mm / 30 • 50
627838060 80 x 80 x 60 x 2.5 mm 5 mm / 24 • 50
627838080 80 x 80 x 80 x 2.5 mm 5 mm / 32 • 50
6278380100 80 x 80 x 100 x 2.5 mm 5 mm / 40 • 25
6278310060 100 x 100 x 60 x 2.5 mm 5 mm / 30 • 50
6278310080 100 x 100 x 80 x 2.5 mm 5 mm / 40 • 50
62783100100 100 x 100 x 100 x 2.5 mm 5 mm / 50 • 25
Gutzeit perforated plate bracket, non-isosceles
Type: Hot-dip galvanized steel with ETA approval 09/0133.

Application: For all kinds of connections. Can be used in places where low demands
are made regarding the forces to be connected.

c
ontents
627846080 60 x 80 x 60 x 2.5 mm 5 mm / 21 • 50

without beading and ETA 09/ 0134 with beading.
Application: There are many possible applications for bracket connectors with and
without reinforcement beading in wooden construction. Bracket connectors are
preferably used for fastening square timbers to masonry and concrete as well as for
wood/wood connections. The bracket connectors with reinforcement beading are
particularly suitable for connections where high forces need to be transferred.
Properties: Reinforcement beading for the type with item no. 627869076.
Installation instructions: The bracket connectors are fastened with anchor nails
4 mm Ø in load carrying capacity class 3 C. Fastening through the 13 mm holes in the
masonry, concrete or wood is done with suitable dowels and screws or bolts. Further
details according to DIN 1052 or the technical documents of the manufacturer.
c
ontents
627869048 90 x 48 x 48 x 3 mm 5 mm / 11 - 13 mm / 3 • 50
627869076 90 x 48 x 76 x 3 mm 5 mm / 16 - 13 mm / 5 • 50
Approved by the building authorities: European Technical Approval ETA 09/0133.

Application: There are many possible applications for bracket connectors in wooden
construction. Bracket connectors are preferably used for fastening square timbers to
masonry and concrete as well as for wood/wood connections.
Installation instructions: The bracket connectors are fastened with anchor nails 4 mm
Ø in load carrying capacity class 3 C. Fastening through the 9 mm and 13 mm holes
in the masonry, concrete or wood is done with suitable dowels and screws or bolts.
Further details according to DIN 1052 or the technical documents of the manufacturer.
c
ontents
627879035 90 x 35 x 40 x 2.5 mm 5 mm / 10 - 9 mm / 2 • 100
6278712035 120 x 35 x 40 x 3 mm 5 mm / 12 - 13 mm / 1 • 100
6278716050 160 x 50 x 40 x 3 mm 5 mm / 14 - 13 mm / 3 • 50
Gutzeit concrete bracket
Application: Concrete bracket connectors are used to fasten wooden components

to concrete, natural stone or masonry.
Properties: Very stable design. Transfers high forces and tilting moments.

contents
6280075756 75 x 75 x 60 x 6 mm 14 mm / 1 - 14 x 29 mm / 1 • 50
62800751006 100 x 75 x 60 x 6 mm 14 mm / 1 - 14 x 29 mm / 1 • 25
62800751506 150 x 75 x 60 x 6 mm 14 mm / 2 - 14 x 29 mm / 1 • 25
62800751008 100 x 75 x 60 x 8 mm 14 mm / 1 - 14 x 25 mm / 1 • 25
62800751508 150 x 75 x 60 x 8 mm 14 mm / 2 - 14 x 29 mm / 1 • 25
Gutzeit steel bracket
Application: For connections of lightweight wooden structures e.g. in furniture or

model construction.
yellow galvanized DG 2185

Item no. Dimension Number of holes x hole Ø Price per 100 pieces Package
contents
6279240 40 x 40 x 15 x 2 mm 4.5 mm / 4 • 50
6279260 60 x 60 x 18 x 2 mm 4.5 mm / 4 • 50
Gutzeit wind bracing strap
Application: Wind bracing straps are used to brace roof structures.

Properties: 1.5 mm strap thickness with identical supporting values as 2 mm.
Installation instructions: The bracket connectors are fastened to the rafter
with 4 mm Ø anchor nails in load carrying capacity class 3 C or with suitable
screws. Further details according to DIN 1052 or the technical documents of the
manufacturer.

Item no. Dimension Roll length Hole Ø Price per piece Package
contents
6278540 40 x 1.5 mm 50 m 5 mm • 1
6278560 60 x 1.5 mm 50 m 5 mm • 1
6279140 40 x 2 mm 50 m 5 mm • 1
6279160 60 x 2 mm 50 m 5 mm • 1
Gutzeit joist hanger, angled outwards

(item no. 6279760100 - 62797140180). European Technical Approval ETA 09/0170
(item no. 6232133 - 6232136).
Application: Joist hangers are used for connecting secondary beams to main beams
or supports. With full nailing, also suitable for biaxial loads.
Properties: With additional large boreholes (combination perforation) for connections
to concrete, masonry and steel. (except for item no. 6232133 and 6232136)
Installation instructions: The bracket connectors are fastened to the beam with
4 mm Ø anchor nails in load carrying capacity class 3 C or screws. Fastening through
the 7 mm and 11 mm holes in the masonry,
concrete or wood is done with suitable dowels
and screws or bolts. Further details according
to DIN 1052 or the technical documents of the
manufacturer.

Item no. Dimensions a x b x c Number of holes x hole Ø Price per Package
100 pieces contents
6279760100 60 x 100 x 2 mm 5 mm / 22 - 7 mm / 1 - 11 mm / 4 • 50
6279780120 80 x 120 x 2 mm 5 mm / 28 - 7 mm / 1 - 11 mm / 4 • 50
62797100140 100 x 140 x 2 mm 5 mm / 34 - 7 mm / 1 - 11 mm / 4 • 25
62797120160 120 x 160 x 2 mm 5 mm / 40 - 7 mm / 1 - 11 mm / 4 • 25
62797140180 140 x 180 x 2 mm 5 mm / 48 - 7 mm / 1 - 11 mm / 4 • 25
6232133 160 x 200 x 2.5 mm 5 mm / 56 mm / - / - • 25
6232136 180 x 220 x 2.5 mm 5 mm / 60 mm / - / - • 25
Gutzeit joist hanger, angled inwards

Application: Joist hangers are used for concealed, hidden connections of secondary
beams to main beams or supports.
Properties: With additional large boreholes (combination perforation) for connections
to concrete, masonry and steel.
Installation instructions: The bracket connectors are
fastened with 4 mm Ø anchor nails in load carrying
capacity class 3 C or screws. Fastening through the
7 mm and 11 mm holes in the masonry, concrete or
wood is done with suitable dowels and screws or bolts.
Further details according to DIN 1052 or the technical
documents of the manufacturer.

Item no. Dimensions a x b x c Number of holes x hole Ø Price per Package
100 pieces contents
6279880120 80 x 120 x 2 mm 5 mm / 28 - 7 mm / 1 - 11 mm / 4 • 50
62798100140 100 x 140 x 2 mm 5 mm / 34 - 7 mm / 1 - 11 mm / 4 • 50
62798120160 120 x 160 x 2 mm 5 mm / 40 - 7 mm / 1 - 11 mm / 4 • 25
62798140180 140 x 180 x 2 mm 5 mm / 48 - 7 mm / 1 - 11 mm / 4 • 25
Gutzeit rafter anchor 2-part, right/left

Application: Rafter anchors are primarily used to tightly connect two timbers that
intersect each other at a right angle. Also to secure rafters to hall girders and to
transfer permanent loads, such as those of an attached beam, to rafters.
Installation instructions: The rafter anchors are fastened with anchor nails 4 mm Ø
in load carrying capacity class 3 C. Further details according to DIN 1052 or the tech-
nical documents of the manufacturer.
Note: Every carton always contains the same number of right and left rafter anchors.

Item no. Dimension Number of Price per Package
holes x hole Ø 100 pieces contents
62799170 170 x 32 x 2 mm 5 mm / 20 • 100
62799210 210 x 32 x 2 mm 5 mm / 28 • 100
62799250 250 x 32 x 2 mm 5 mm / 36 • 50
62799290 290 x 32 x 2 mm 5 mm / 44 • 100
623335 330 x 32 x 2 mm 5 mm / 26 • 100
For an order of 100 units, 50 left and 50 right rafter anchors each are included.
Hidden wood connector IdeeFix
Approved by the building authorities: Building Standards Approval no. Z-9.1-713.

Application: For universal use, for hidden wood/wood attachments. Main application
areas for IdeeFix wood connectors are hidden connections of main and secondary
girders.
Properties: Completely hidden, can be retensioned and removed easily. Low wood
weakening. High load carrying capacity under tensile and transverse forces. Suitable
for single and multi-row series connections. Complete with system screws.
Installation instructions: Connections where pure tensile forces occur are set flush.
For main-secondary girder connections, the IdeeFix is set in such a way that the con-
nector sits partially in the main girder to absorb transverse loads.
galvanized DG 2185
Item no. Type Internal thread Hole Ø Scope of supply Price per piece Package
contents
6284030 IdeeFix 30 M 12 30 mm 8 screws 5 x 40 • 25
You can request planning aids and the approval test report through us.

Gutzeit summers

Application: Summers are used for the concealed fastening of visible connection
joints between main and secondary beams. Main application areas include ceiling
beams located in one level and downstand beams or rafters.
Properties: With mounting slot for easy and smooth installation.
Installation instructions: Installation on the main beam is done with 4 mm Ø anchor
nails in load carrying capacity class 3 C. The attachment to the secondary beam with
rod dowels 12 mm. Further details according to DIN 1052 or the technical documents
of the manufacturer.

contents
62788120 120 mm 5 mm / 11 - 13 mm / 3 • 25
62788160 160 mm 5 mm / 15 - 13 mm / 4 • 25
62788200 200 mm 5 mm / 19 - 13 mm / 4 • 15
Gutzeit HE anchor girder connector
Application: The HE girder connectors are used to fasten wooden beams to T-girders.
Installation instructions: The HE girder connectors must be installed diagonally.
For fastening, anchor nails of 4 mm Ø in load carrying capacity class 3 C or, provided
large holes are present, screws of 12 mm are to be used. Further details according
to DIN 1052 or the technical documents of the manufacturer.

c
ontents
6279040135 40 x 135 x 4 mm 5 mm / 6 • 100
6279040175 40 x 175 x 4 mm 5 mm / 10 - 13 mm / 2 • 50
623263 50 x 200 x 3 mm 5 mm / 10 - 11 mm / 1 • 100
Gutzeit profile anchor
Application: The profile anchors are used to fasten wooden beam profile rails.
Installation instructions: We recommend installing the profile anchors on both
sides. For fastening, anchor nails of 4 mm Ø in load carrying capacity class 3 C or,
provided large holes are present, screws of 12 mm are to be used. Further details
according to DIN 1052 or the technical documents of the manufacturer.

Item no. Dimension for profiles Number of Price per Package
holes x hole Ø 100 pieces contents
6278935108 35 x 108 x 3 mm 28 / 15 5 mm / 8 • 100
(Halfeneisen)
6278935158 35 x 158 x 3 mm 28 / 15 5 mm / 11 • 100
(Halfeneisen)
6278935198 35 x 198 x 3 mm 28 / 15 5 mm / 15 • 50
(Halfeneisen)
6278935159 35 x 159 x 4 mm 38 / 17 5 mm / 8 - 13 mm / 1 • 50
(Halfeneisen)
Gutzeit post anchors T form with ribbed dowel
Application: The type T post anchors are

suitable for fastening lightweight structures
such as carports or light awnings.
Properties: With 20 x 250 mm ribbed dowel
for setting in concrete. Constructive wood
protection thanks to concealed connection.

Item no. Mounting plate Side clip Number of Price per Package
holes x hole Ø piece contents
62809250 80 x 100 x 8 mm 70 x 110 x 8 mm 10 mm / 4 • 10
Gutzeit post anchors U form with ribbed dowel
Application: The type T post anchors are suitable for

fastening lightweight structures such as carports or light
awnings.
Properties: With 20 x 250 mm ribbed dowel for setting
in concrete.

Item no. Dimensions a x b x c x d Number of Price per piece Package
holes x hole Ø c
ontents
6281171250 71 x 100 x 65 x 4 mm 11 mm / 6 • 10
6281181250 81 x 100 x 65 x 4 mm 11 mm / 6 • 10
6281191250 91 x 100 x 65 x 4 mm 11 mm / 6 • 10
62811101250 101 x 100 x 65 x 4 mm 11 mm / 6 • 10
62811121250 121 x 100 x 65 x 4 mm 11 mm / 6 • 10
62811141250 141 x 100 x 65 x 4 mm 11 mm / 6 • 10
Gutzeit post anchors U form with ribbed dowel, laterally adjustable
Application: The type U post anchors are suitable

for fastening lightweight structures such as carports
or light awnings.
Properties: With ribbed dowel for setting in concrete.
Laterally adjustable for posts from 80 to 160 mm.

Item no. Ribbed dowel Dimensions Number of Price per Package
axbxcxd holes x hole Ø piece contents
6281280250 20 x 250 mm 120 x 80 x 80-160 x 4 mm 8 mm / 8 - 13 mm / 2 • 10
6281280400 20 x 400 mm 120 x 80 x 80-160 x 4 mm 8 mm / 8 - 13 mm / 2 • 10

Gutzeit post anchors U form, vertically and laterally adjustable
Application: The type U post anchors are suitable

for fastening lightweight structures such as
carports or light awnings.
Properties: With base plate for surface mounting.
Vertically adjustable by 70 mm (maximum), even
in a properly installed state. Laterally adjustable
for posts from 80 to 160 mm. Ground height
130 mm.
yellow chromated DG 2185

Item no. Dimensions a x Height adjustment Base plate Number of Price per Package
bxcxd holes x hole Ø piece contents
6281380160 105 x 80 x 80- 70 mm 180 x 80 mm 5 mm / 8 - • 10
160 x 4 mm 13 mm / 2
Dowel holes in the base plate 4 holes, 13 mm ø hole.
Gutzeit post anchors H form
Application: The form H post anchors are suited for fastening heavy wooden struc-
tures such as carports, awnings, windbreak fences, and much more.
Properties: Suitable for directly setting in concrete or for installation above a sleeve
foundation.

Item no. Dimensions for wooden Hole Ø x Price per Package
axbxcxdxe posts number of holes piece contents
6280871 600 x 250 x 60 x 71 x 6 mm 71 mm 12 mm/ 4 • 10
6280881 600 x 250 x 60 x 81 x 6 mm 81 mm 12 mm/ 4 • 10
6280891 600 x 250 x 60 x 91 x 6 mm 91 mm 12 mm/ 4 • 10
62808101 600 x 250 x 60 x 101 x 6 mm 101 mm 12 mm/ 4 • 10
Post anchor I form, with stone dowel, adjustable in height
Application: The form I post anchors are suited for fastening heavy wooden struc-
Properties: With a stone dowel attached to the threaded rod for setting in concrete.
Vertically adjustable (the specified range, naturally depending on the depth of setting
in concrete, is 300 mm).

Item no. Type Overall Height Threaded Mounting Number of Price Package
height adjustable rod plate holes per contents
Ø 11.0 mm piece
6233016 1619 380 mm 150 - 200 mm M 20 100/ 100/ 8 mm 4 • 15
6233017 1619a 380 mm 150 - 200 mm M 24 100/ 100/ 8 mm 4 • 15
Gutzeit post anchor I form with pipe fowl, adjustable in height
Application: The form I post anchors are suited for fastening heavy wooden
structures such as carports, awnings, windbreak fences, and much more.
Properties: With base plate for surface mounting. Vertically adjustable by 70 mm
(maximum). Receptacle pin for rod dowel 10 mm.

Item no. Thread Basic Base plate Mounting plate
Number Price per Package
height of holes x piece contents
hole Ø
62814140 M 24 mm 140 mm 180 x 100 x 6 mm 100 x 100 x 8 mm 13 mm / 4 • 1
62814190 M 24 mm 190 mm 180 x 100 x 6 mm 100 x 100 x 8 mm 13 mm / 4 • 1
Pipe ø x thickness 48.3 mm x 3.25 mm.
Gutzeit post anchors form I 400 mm, vertically adjustable
tures such as carports, awnings, windbreak fences, and much more. Such post
anchors are predominantly used where the composition, e.g. a strong gravel layer,
necessitates long pipe dowels.
Properties: With pipe dowel and small base plate for setting in concrete. Extra
long design. Vertically adjustable by 70 mm (maximum). Receptacle pin for rod dowel
10 mm.

Item no. Basic Base plate Mounting Price Package
height plate per contents
piece
62815400 400 mm 70 x 70 x 100 x 100 x • 1
4 mm 8 mm
Pipe ø x length 48.3 mm x 3.25 mm.
Gutzeit post anchor I form with pipe fowl, adjustable in height
(maximum), even in a properly installed state. Visually pleasing shape for hidden
connections. Receptacle pin for rod dowel 10 mm.

Item no. Thread Basic Mounting Base Hole Ø x number of holes Price Package
height plate plate per contents
piece
62816 M 24 130 mm 80 x 80 x 100 x 80 x 13 mm / 4 in base plate, 13 mm / 2 • 1
6 mm 60 mm + 13 x 20 mm / 2 in mounting plate
Holes in the base plate 4 ø 13 mm pieces, in the supporting plate 2 ø 13 mm pieces and 2 13 x 20 mm elongated holes.

Gutzeit post anchors P form
Application: The type P post anchors are especially suited for applications where
high forces need to be absorbed.
Properties: Very stable design with strong 48.3 x 3.25 mm spacer tube.
Constructive wood protection is provided thanks to hidden fastening from below.

Item no. Height Mounting plate Base plate Hole Ø x Price per Package
number of piece contents
holes
62817100 100 mm 100 x 100 x 6 mm 150 x 150 x 5 mm 13 mm / 4 • 10
62817150 150 mm 100 x 100 x 6 mm 150 x 150 x 5 mm 13 mm / 4 • 10
Post anchor type P, height-adjustable without rod dowel
Application: The type P post anchors are especially suited for applications
where high forces need to be absorbed.
Properties: Very stable design. Vertically adjustable to 110 mm for threaded rod
length 150 mm and max. 270 mm for threaded rod length 300 mm.

Item no. Height Threaded Base plate Mounting plate Price per Package
rod piece contents
6233012 100 mm M 20 x 150 150 x 150 x 5 mm 100 x 100 x 8 mm • 15
6233013 150 mm M 24 x 150 150 x 150 x 5 mm 100 x 100 x 8 mm • 10
6233028 300 mm M 20 x 300 180 x 100 x 5 mm 100 x 100 x 8 mm • 12
With 4 holes each 13.0 mm Ø in the base and supporting plate. In item no. 6233028 there are only 2 holes in the supporting plate.
Gutzeit post anchors P form, vertically adjustable
Application: The type P post anchors are suitable for fastening light to heavy
wooden structures.
(maximum), even in a properly installed state. Visually pleasing shape for hidden con-
nections. Constructive wood protection is provided thanks to hidden fastening from
below.

Item no. Thread Basic height Mounting plate Base plate Price per Package
piece contents
62818 M 20 120 mm 80 x 80 x 6 mm 80 x 160 x 6 mm • 10
Holes in the supporting plate 2 ø 13 mm pieces and 2 13 x 20 mm elongated holes, in the base plate 4 ø 13 mm pieces.
Gutzeit post anchors P/I form, vertically adjustable
Application: The type P post anchors are especially suited for applications where
Properties: With base plate for surface mounting. Vertically adjustable.

Item no. Height Thread Mounting plate Base plate Price per Package
piece contents
62819310 310 mm M 24 100 x 150 x 8 mm 100 x 180 x 8 mm • 1
Holes in the supporting plate 4 ø 11 mm pieces, in the base plate 4 ø 13 mm pieces.
Gutzeit post anchors T form
Application: The type T post anchors are especially suited for applications where
Properties: Very stable design for high pressure forces. Strong 48.3 mm spacer tube.
Large-scale 120 x 80 x 6 mm sword

Item no. Height Base plate Mounting plate Hole Ø x Hole Ø x Price per Package
without base plate sword piece contents
sword
62820100 100 mm 180 x 100 x 6 mm 90 x 80 x 8 mm 13 mm/ 4 11 mm/ 4 • 1
62820150 150 mm 180 x 100 x 6 mm 90 x 80 x 8 mm 13 mm/ 4 11 mm/ 4 • 1
62820200 200 mm 180 x 100 x 6 mm 90 x 80 x 8 mm 13 mm/ 4 11 mm/ 4 • 1
62820250 250 mm 180 x 100 x 6 mm 90 x 80 x 8 mm 13 mm/ 4 11 mm/ 4 • 1
Holes in the sword 4 ø 11 mm pieces for 10 mm rod dowels, in the base plate 4 ø 13 mm pieces.
Gutzeit post anchors T form, vertically adjustable
Application: The type T post anchors are especially suited for applications where
Properties: Very stable design for high pressure forces. Large-scale 110 x 70 x 8 mm
sword.

Item no. Height Base plate Mounting plate Hole Ø x Hole Ø x Price per Package
without base plate sword piece contents
sword
62820100 110 mm 160 x 70 x 8 mm 100 x 80 x 13 mm/ 2 10 mm/ 4 • 1
8 mm

Ribbed nails
Application: Anchor nails/ribbed nails are mainly used to fasten sheet metal parts
in timber construction for load-bearing structures.
Properties: The anchor nails have the classification certificate with load carrying
capacity class III.
DG 2185
Item no. Wire Ø Thread Ø Length Price per 100 pieces Package
contents
623254040 4 mm 4.4 mm 40 mm • 250
623254050 4 mm 4.4 mm 50 mm • 250
623254060 4 mm 4.4 mm 60 mm • 250
623254075 4 mm 4.4 mm 75 mm • 250
6232540100 4 mm 4.4 mm 100 mm • 250
623256060 6 mm 6.4 mm 60 mm • 250
623256080 6 mm 6.4 mm 80 mm • 250
6232560100 6 mm 6.4 mm 100 mm • 250
Wood connector, one-ended
Application: Cast iron wood connectors are used in static wooden construction for
transferring particularly great forces. One-sided connectors are used for connecting
wood/steel, wood/concrete and wood/wood. Double-sided connectors are only used
for connecting wood/wood.
Note: Correspond to the Construction Products Directive 89/106 EWG Building
Rules List A 95/1.
Galvanized cast iron DG 2180

Item no. Outside Ø for bolts Price per Package
100 pieces contents
621051950 50 mm M 12 • 50
621051965 65 mm M 16 • 50
621051980 80 mm M 20 • 25
621051995 95 mm M 24 • 25
6210519115 115 mm M 24 • 25
Wood connector, double-ended
Application: Cast iron wood connectors are used in static wooden construction for
transferring particularly great forces. One-sided connectors are used for connecting
wood/steel, wood/concrete and wood/wood. Double-sided connectors are only used
for connecting wood/wood.
Note: Correspond to the Construction Products Directive 89/106 EWG Building
Rules List A 95/1.

Item no. Outside Ø Price per Package
100 pieces contents
621052950 50 mm • 50
621052965 65 mm • 50
621052980 80 mm • 25
621052995 95 mm • 25
Simplex wood connector
Application: Simplex wood connectors are used for the non-positive, hidden
connection of two timbers. Main application areas are end-grain connections.
galvanized
Item no. Thread Dimensions Price per Package
piece contents
6245212 M 12 54 x 24 mm • 100
6245216 M 16 72 x 32 mm • 50
Simplex setting tool

Application: This setting tool is used to guide in and perfectly position the Simplex
wood connectors.
Item no. Price per piece Package

contents
62452 • 1
Construction clamp
Application: Cramps are mainly used to provisionally and temporarily connect two
timbers.
hot-dip galvanized
Item no. Length Dimension Price per Package
100 pieces contents
6201609250 250 mm 25 x 5 mm • 25
6201609300 300 mm 25 x 5 mm • 25
Rafter nails
Application: Rafter nails are mainly used to fasten rafters to purlins.
Properties: The anchor nails have the classification certificate with load carrying
capacity class III (except for length 325 mm).
Note: The rafters should be pre-drilled from a length of 180 mm.
galvanized DG 2182
62267150 6 x 150 mm • 250
62267180 6 x 180 mm • 100
62267210 6 x 210 mm • 100
62267230 6 x 230 mm • 100
62267260 6 x 260 mm • 100
62267280 6 x 280 mm • 100
62267300 6 x 300 mm • 100
62267325 6 x 325 mm • 100
Roof nails
Application: Roof nails are used to fasten and level the ridge or hip slat in the
roof truss.
Properties: Stable riveting of U-sheet and nail.
galvanized DG 2181
Item no. Nail length Bearing surface width Price per piece Package contents
62270210 210 mm 50 mm • 50
62271210 210 mm 60 mm • 50
62270230 230 mm 50 mm • 50
62271230 230 mm 60 mm • 50
62270260 260 mm 50 mm • 50
62271260 260 mm 60 mm • 50
62271310 310 mm 60 mm • 50

Countersunk head screw nails
Application: Screw nails are suitable for fastening light wooden or metal parts
to wood.
Properties: Made of hardened steel with a countersunk head and screw thread.
Largely splice-free, thanks to the screw thread.
galvanized DG 2185
6226140 3.6 x 40 mm • 1.000
6226150 3.6 x 50 mm • 1.000
6226165 4.5 x 65 mm • 500
6226175 4.5 x 75 mm • 250
62261100 5 x 100 mm • 250
Steel nails, ribbed
Application: Steel nails are suitable for fastening timbers, laths, profiles, paneling on
concrete and masonry.
Properties: Made of shatterproof, toughened steel with a deep countersunk head
and ribbed shaft.
hardened and metalized DG 2185

6224750 4.5 x 50 mm • 250
6224760 4.5 x 60 mm • 250
6224770 4.5 x 70 mm • 250
6224780 4.5 x 80 mm • 250
62247100 4.5 x 100 mm • 250
Copper deck nails
Application: Copper nails are used to fasten copper sheets when covering roofs.
Properties: With large head and slightly ribbed shaft.
DG 2183
Item no. Dimension Head Ø Price per kilogram Package contents
6227325 2.8 x 25 mm 5.6 mm • 1
6227330 2.8 x 30 mm 5.6 mm • 1
Assembly support
Application: Assembly supports are used to clamp plasterboards, wooden boards,

wooden battens, profiles, substructures and much more for overhead assemblies.
Properties: Telescopic to 3.5 m.

62543 • 1
building chemistry
General building chemistry,

General
PU foams and sealants,

adhesives
FAKKT PU pro gun foam XL Ultra 750 1-component
Application: FAKKT XL Ultra 750 PU gun foams are used to install and foam door
and window frames, joints and cavities, wall or pipe openings. For installing insula-
tion material and much more.
Properties: The FAKKT XL Ultra 750 is a 1-component polyurethane foam. Cans with
screw thread. Adheres to almost all substrates that are found in construction except
PE, PP and PTFE. Only minimal post-elongation once curing has been completed.
Can be plastered, painted and bonded over once curing has been completed.
High insulation rating, stable in shape, low shrinkage <3%, silicone free, solvent free,
aging resistant, does not rot. Precise and economical dispensing when using the
FAKKT application gun. Not UV-resistant. Fire protection class B2 - test certificate
DIN 4102. High sound insulation rating - test certificate ift Rosenheim. Color: gray.
Technical information:
Curing system: Curing by air humidity.
Curing speed*: approx. 30 minutes for 30 mm of foam strand
Free of adhesive on the surface*: approx. 8 minutes for 30 mm of foam strand
Can be despread*: approx. 2 hours for 30 mm foam strand
Can be cut*: approx. 40 minutes for 30 mm of foam strand
Fully loadable*: approx. 12 hours for 30 mm foam strand
Foam yield*: approx. 65 l per liter free-foam
Temperature resistance: - 40 °C to +90 °C (1 h to 120 °C) processing temperature:
+5 °C to +35 °C (adhesive surface temperature)
Usable life: 18 months after production date in cold and dry storage
*) measured at 20 °C and 65% RH
Advantages:
- novel formula makes the same yield possible as with 750 ml cans
- opened gun foams remain dispensable throughout the entire shelf-life
Note: To prevent residual foam in the gun from curing, we recommend replacing
empty cans with new foam cans as soon as possible after removal and cleaning
the entire cycle with Soudal gun foam cleaner prior to longer interruptions.
PU foams contain isocyanate and we recommend using disposable latex gloves

when processing non-cured foam.
Item no. Contents Price per piece Price per piece Package contents
from 12 pieces
624844 500 ml • • 1
Item accessories
624901 Soudal application gun for PU gun foams •
FAKKT PU gun foam 1-component
Application: FAKKT PU gun foams are used to install and foam door and window
frames, joints and cavities and wall or pipe openings. For installing insulation material
and much more.
Properties: The FAKKT gun foam is a 1-component polyurethane foam. Cans with
screw thread. Adheres to almost all substrates that are found in construction except
PE, PP and PTFE. Only minimal post-elongation once curing has been completed.
Can be plastered, painted and bonded over once curing has been completed. High
insulation rating, stable in shape, low shrinkage <3%, silicone free, solvent free,
aging resistant, does not rot. Precise and economical dispensing when using the
FAKKT application gun. Not UV-resistant. Fire protection class B2 - test certificate
DIN 4102. High sound insulation rating - test certificate ift Rosenheim. Color: yellow
(champagne).
Temperature resistance: -40 °C to +90 °C (1 h to 120 °C) processing temperature:
Advantage:

Item no. Contents Pack unit Price per piece Price per piece Package
from 12 pieces contents
624841 750 ml Can • • 1
Item accessories

Soudal PU gun foam CLICK & FIX
Application: Soudal Click & Fix PU gun foams are used to install and foam door and
window frames, joints and cavities and wall or pipe openings. For installing insulation
material and much more.
Properties: The Soudal Click & Fix gun foam is a 1-component polyurethane foam.
Cans with bayonet connection. Adheres to almost all substrates that are found in
construction except PE, PP and PTFE. Only minimal post-elongation once curing has
been completed. Can be plastered, painted and bonded over once curing has been
completed. High insulation rating, stable in shape, low shrinkage <3%, silicone-free,
solvent-free, aging resistant, does not rot, waterproof, but not watertight. Precise
and economical dispensing when using the FAKKT application gun. Not UV-resistant.
Fire protection class B2 - test certificate DIN 4102. High sound insulation rating - test
certificate ift Rosenheim. Color: yellow (champagne).
Temperature resistance: - 40 °C to +90 °C (1 h to 120 °C) processing temperature:
Advantages:
- fast can replacement with Click & Fix
- bayonet connection
empty cans with new foam cans as soon as possible after removal and cleaning the
entire cycle with Soudal gun foam cleaner prior to longer interruptions.

624842 750 ml Can • • 1
Item accessories
Soudal PU Flexifoam gun foam
Application: FAKKT PU gun foams are used to install and foam door and window
frames, joints and cavities and wall or pipe openings where structural movements
occur.
Properties: The Soudal Flexifoam is a highly flexible 1-component polyurethane
foam. 3 x more flexible than conventional installation foam. Permanent absorption of
50% structural movement (10% elongation and 40% compression). Cans with screw
thread. Adheres to almost all substrates that are found in construction except PE,
PP and PTFE. Only minimal post-elongation once curing has been completed. Can
be plastered, painted and bonded over once curing has been completed. High insu-
lation rating, stable in shape, low shrinkage <5%, silicone-free, solvent-free, aging
resistant, does not rot. Precise and economical dispensing when using the FAKKT
application gun. Not UV-resistant. Fire protection class B2 - test certificate DIN 4102.
High sound insulation rating - test certificate ift Rosenheim. Color: blue.
Curing system: Curing by air humidity
Curing speed:* approx. 30 minutes for 30 mm of foam strand
Free of adhesive on the surface:* approx. 6 minutes for 30 mm of foam strand
Can be despread* approx. 1 hour for 30 mm foam strand
Can be cut:* approx. 20 minutes for 30 mm of foam strand
Fully loadable:* approx. 12 hours for 30 mm foam strand
Foam yield:* approx. 35 l per liter free-foam
Temperature resistance: -40 °C to +90 °C (1 h to 120 °C)
Processing temperature: +5 °C to +35 °C (adhesive surface temperature)
Advantages:
- absorbs strong structural movements permanently and sustainably, thus avoiding
foam cracks and associated reduced thermal and sound insulation as well as water
penetration

Item no. Contents Price per piece Price per piece Package contents
from 12 pieces
624849 750 ml • • 1

FAKKT SP70 Foam Gun for PU Foams
Application: The FAKKT SP70 guns are used to dispense from PU gun foam cans.
Properties: The FAKKT SP70 guns stand out with their low weight yet very high
stability. The guns are additionally sealed at particularly critical points (foam inlet and
outlet) with new soft sleeves. Adapter and valve are fully non-stick coated.
Advantages:
- novel Soft-Sleeves seals
- new precise dosage system
- easy and uniform venting
Item no. Type for PU foam cans Price Package

per contents
piece
6249022 with screw K&K item no. • 1
thread 624841, 624844,
624847.624849
Soudal application gun for PU gun foams
Application: The Soudal design guns are used to dispense from PU gun foam cans.
Properties: High-quality, stable design made of metal with plastic handle. They are
coated with PTFE on the inside. They prevent dripping.
Item no. Type for PU foam cans Price per Price per Package
piece piece from contents
3 pieces
6249013 with bayonet PU gun foam • • 1
connection CLICK & FIX
Metal application gun, long application tube
Application: These guns with a long tube are used to apply PU insulation foam for
applications on flat roofs.
Properties: High-quality, stable design made of metal with plastic handle. Interior
coated with PTFE. Prevents dripping. Total length 1 meters for ergonomic work
on flat roofs. (for work on walls and ceilings, use the application gun with a normal
length tub item no. 6249011).
Item no. Type Price per Price per Package

12 pieces
6249018 1.000 mm • • 1
Soudal gun foam cleaner
Application: Soudal gun foam cleaners are used for cleaning the
inside and outside of the application guns as well as for removing
non-cured PU foam.
Properties: Fast-acting cleaner based on acetone.
Note: Twist foam cans onto application guns, wait a few seconds
for it to take effect and then squeeze the gun lever until no more
foam escapes.
Item no. Type suitable for Contents Price Price per Package
per piece from contents
piece 12 pieces
624951 with screw Application gun for PU gun foams with 500 ml • • 1
thread screw thread connection
624952 with bayonet Application gun for PU gun foams with 500 ml • • 1
connection bayonet connection
FAKKT PU installation foam 1-component
Application: FAKKT PU installation foams are used to install and foam door and
window frames, joints and cavities and wall or pipe openings. For installing insulation
material and much more.
Properties: The FAKKT installation foam is a 1-component polyurethane foam.
Adheres to almost all substrates that are found in construction except PE, PP and
PTFE. Only minimal post-elongation once curing has been completed. Can be
plastered, painted and bonded over once curing has been completed. High insula-
tion rating, stable in shape, low shrinkage <3%, silicone-free, solvent-free, aging
resistant, does not rot. Not UV-resistant. Fire protection class B2 - test certificate
DIN 4102. High sound insulation value. Color: yellow (champagne).
Can be despread* approx. 3 hours for 30 mm foam strand
Can be cut:* approx. 3 hours for 30 mm foam strand
Usable life: 12 months after production date in cold and dry storage.
Note: PU foams contain isocyanate and we recommend using disposable latex
gloves when processing non-cured foam.
Item no. Contents Pack unit Contents Price per Price per Package
12 pieces
62483 500 ml Can 500 ml • • 1

Soudal PU B1 foam 1-component - hardly flammable
Application: Soudal B1 PU installation foams are used for insulation as well as for
fastening building components that need to comply with fire protection class B1.
Properties: The Soudal B1 installation foam is a 1-component polyurethane foam.
Hardly flammable in compliance with building material class B1. Adheres to al-
most all building substrates (except PE, PP, PTFE and silicone). Stable in shape,
no shrinkage, only minimal post-elongation. Can be plastered and painted over.
Silicone-free, solvent-free, aging resistant, does not rot. Waterproof but not water-
tight. Not UV-resistant. Color: blue.
Can be despread* approx. 3 hours for 30 mm foam strand
Note: PU foams contain isocyanate and we recommend using disposable latex
gloves when processing non-cured foam.
Item no. Contents Pack unit Price per Price per Package
12 pieces
624832 750 ml Can • • 1
Soudal PU well and fountain foam
Application: Watertight Soudal well and fountain foams are used to seal fountains,
well rings and house connections.
Properties: The Soudal fountain foam is a 1-component polyurethane foam.
Watertight up to 0.5 bar. Replaces cementing well rings, resulting in high time-
savings. Adheres to almost all building substrates (except PE, PP, PTFE and silicone).
Stable in shape, no shrinkage. Only minimal post-elongation. Can be plastered and
painted over. Silicone-free, solvent-free, aging resistant, does not rot. Resistant
to a variety of solvents, oil, gasoline, chemicals, many acids and to all bacteria that
normally occur in the soil. Not UV-resistant. Color: yellow (champagne).
Advantage:
- enormous time savings and therefore cost savings compared to the conventional
way of cementing well rings
Note: Do not remove overflowing foam because otherwise the surface is destroyed
and there will no longer be a seal.
Item no. Contents Pack unit Price per Price per Package
12 pieces
624833 750 ml Can • • 1
Soudal PU quick set pro frame foam 2 K plus
Application: 2-component Soudal PU pro frame foams are mainly used to fasten
door frames extremely quickly as well as to bond windowsills and staircase steps.
Properties: The Soudal quick set pro foam is a 2-component polyurethane foam.
Very quick, compression and tension free curing regardless of air humidity. Adheres
to almost all substrates that are found in construction except PE, PP and PTFE
and silicone. No shrinkage and post-elongation once curing has been completed.
Silicone-free, propellant-free, solvent-free, aging resistant, does not rot, can be
plastered and painted over once curing has been completed. Not UV-resistant.
Fire protection class B2 - test certificate DIN 4102. Color: yellow (champagne).
Curing system: Curing by chemical reaction
Free of adhesive on the surface:* approx. 1 minute for 30 mm of foam strand
Can be despread* approx. 20 minutes for 30 mm of foam strand
Can be cut:* approx. 5 minutes for 30 mm of foam strand
Foam yield:* approx. 5.5 l per 210 ml
Processing temperature: +10 °C to +30 °C
Advantage:
- cures extremely quickly regardless of air humidity
Note: PU foams contain isocyanate and we recommend using disposable
latex gloves when processing non-cured foam.
624861 210 ml Double cartridge • • 1
Item accessories
624905 Application gun for quick set PU foam •

FAKKT silicone N-oxime
Application: FAKKT N silicones are used to seal building and construction joints,
for attachment joints on construction elements made of wood, metal and plastic,
for expansion joints of different materials as well as for all glazing applications in
construction with the exception of seals with edge compound (see the note below).
Properties: FAKKT N silicone is a neutral curing, permanently elastic sealing com-
pound based on polysiloxane (oxime). For all building substrates except natural
stone, acrylic glass, PP, PE and PTFE. For indoor and outdoor applications. Can also
be used on problematic substrates such as copper and stainless steel. Suitable for
all expansion joints up to 25%. Low in odor, colorfast, weather and UV-resistant.
Fire protection class B2 - test certificate DIN 4102.
Base 1 K polysiloxane oxime
Skin formation:* approx. 5 minutes
Curing speed*: approx. 2 mm within the first 24 hours
Maximum deformation: 25%
Resilience: >80%
Elongation at break: 800%
Temperature resistance: -60 °C to +120 °C
*) measured at 23 °C / 50% RH
Note: It is not permissible to use the N oxime silicone for glazing applications with
edge compound (glass/frame sealing). For such applications we recommend our
pro N silicone.
For problematic substrates such as acrylic glass and natural stone, we recommend
Soudal AL (acrylic glass) and MA (marble and other natural stone) silicones.
Item no. Color Contents Pack unit Price per Price per Package
15 pieces
624911 white 310 ml Cartridge • • 1
624912 gray 310 ml Cartridge • • 1
624913 brown 310 ml Cartridge • • 1
624914 transparent 310 ml Cartridge • • 1
624915 black 310 ml Cartridge • • 1
Item accessories
624901 Application gun HPS 400 K •
Soudal silicone N-oxime in hose bag
Application: N silicones are used to seal building and construction joints, for attach-
ment joints on construction elements made of wood, metal and plastic, for expansion
joints of different materials as well as for all glazing applications in construction with
the exception of seals with edge compound (see the note below).
Properties: Neutral curing, permanently elastic sealing compound based on polysi-
loxane (oxime). For all building substrates except natural stone, acrylic glass, PP, PE
and PTFE. For indoor and outdoor applications. Can also be used on problematic
substrates such as copper and stainless steel. Suitable for all expansion joints up to
25%. Low in odor, colorfast, weather and UV-resistant. Fire protection class B2 - test
certificate DIN 4102.
Technical information: Base 1 K polysiloxane oxime
Skin formation*: approx. 5 minutes
Curing speed*: approx. 2 mm within the first 24 hours
Resilience: >80%
Note: It is not permissible to use the N oxime silicone for glazing applications with
edge compound (glass/frame sealing). For such applications we recommend our pro
N silicone.
Item no. Color Contents Pack unit Price per Price per piece Package
piece from 12 pieces contents
624941 transparent 600 ml Hose bag • • 1
624942 white 600 ml Hose bag • • 1
624943 gray 600 ml Hose bag • • 1
Item accessories
62492 Application gun HPS 600 A •

Soudal Silirub Pro N Glazing Silicone
Application: Soudal Pro N silicones are used to seal building and structural joints,
for attachment joints on building components made of wood, metal and plastic, for
expansion joints made of different materials, for butt joint seals between bordering
glazing elements (weather sealing), as well as for all glazing work in construction.
Also for glass/frame seals in conjunction with coated wood, anodized aluminum and
hard PVC after consultation with the manufacturer (see the note below).
Properties: The Soudal Pro-N silicone is a very high-quality, neutral curing,
permanently elastic sealing compound based on polysiloxane (oxime). For all
common building substrates. Acrylic glass and safety glass after consultation with
the manufacturer. For indoor and outdoor applications. Also suitable for problematic
substrates such as copper and stainless steel. Thanks to the fungicidal design, the
Pro N can also easily be used in sanitary spaces. Not suitable for natural stone, PP,
PE, PTFE and bonded all-glass facades. Solvent-free, low in odor, colorfast, weather
and UV-resistant. Corresponds to the building construction DIN 18545 part 2. Fire
protection class B2 - test certificate DIN 4102.
Technical information: Base 1 K polysiloxane oxime.
Curing speed:* approx. 2 mm within the first 24 hours
Resilience: >90%
Advantages:
- neutral silicone equipped with fungicide
- window sealing in new buildings can no longer get moldy
Note: Compatibility in the system is to be ensured when used as glass/frame adhe-
sive as well as for weather sealing. Prior consultation with the sealant manufacturer
is absolutely necessary. Tell us the type of glass and also the glass manufacturer if
possible. We will then inform you if there is an approval available from the sealant
manufacturer. For problematic substrates such as acrylic glass and natural stone,
we recommend Soudal AL (acrylic glass) and MA (marble and other natural stone)
silicones.
Item no. Color Contents Price per piece Price per piece Package
628721 transparent 310 ml • • 1
628722 white 310 ml • • 1
628723 gray 310 ml • • 1
628724 aluminum gray 310 ml • • 1
628725 brown 310 ml • • 1
628727 black 310 ml • • 1
Item accessories
624903 Soudal SQ application gun •
62490 Soudal application gun H 40 •
62484 Soudal primer •
624945 Soudal silicone remover •
Soudal Silirub Pro N Glazing Silicone in a tubular bag
Application: Pro N silicones are used to seal building and structural joints, for
attachment joints on building components made of wood, metal and plastic, for
expansion joints made of different materials, for butt joint seals between bordering
glazing elements (weather sealing), as well as for all glazing work in construction.
Also for glass/frame seals in conjunction with coated wood, anodized aluminum
and hard PVC after consultation with the manufacturer.
Properties: Very high-quality, neutral curing, permanently elastic sealing compound
based on polysiloxane (oxime). For all common building substrates. Acrylic glass and
safety glass after consultation with the manufacturer. For indoor and outdoor applica-
tions. Also suitable for problematic substrates such as copper and stainless steel.
Thanks to the fungicidal design, the Pro N can also easily be used in sanitary spaces.
Not suitable for natural stone, PP, PE, PTFE and bonded all-glass facades. Solvent-
free, low in odor, colorfast, weather and UV-resistant. Corresponds to the building
construction DIN 18545 part 2. Fire protection class B2 - test certificate DIN 4102.
Technical information: Base 1 K polysiloxane oxime
Resilience: >90%
Advantages:
- neutral silicone equipped with fungicide
- window sealing in new buildings can no longer get moldy
Note: Compatibility in the system is to be ensured when used as glass/frame
adhesive as well as for weather sealing. Prior consultation with the sealant manu
facturer is absolutely necessary. Tell us the type of glass and also the glass manu
facturer if possible. We will then inform you if there is an approval available from the
sealant manufacturer. The Pro N silicone is not suitable for bonded all-glass facades.
628732 white 600 ml • • 1
Item accessories

FAKKT sanitary silicone e-acetate
Application: FAKKT E sanitary silicones are used to seal joints for sanitary purposes,
in kitchens and cold storage rooms.
Properties: The FAKKT E silicone is an acetic curing, permanently elastic sealing
compound based on polysiloxane acetate. For all building substrates, for ceramic,
porcelain, enamel (except PVC, PP, PE, PTFE). Due to its acidic properties, copper,
lead, brass, zinc or iron can be affected. Suitable for all expansion joints up to 25%.
Colorfast and UV-resistant. Prevents fungal growth.
Technical information: Base 1 K polysiloxane acetate.
Resilience: >90%
Usable life 12 months after production date in cold and dry storage.
15 pieces
624874 brown 310 ml Cartridge • • 1
624876 manhattan 310 ml Cartridge • • 1
Item accessories
FAKKT acrylic
Application: FAKKT acrylic sealants are used to seal lightly loaded, static connection
joints and cracks between masonry and door or window framing or other building
components as well as to seal panel joints, metal seams or panel overlaps.
Properties: FAKKT acrylic is a plasto-elastic sealant on an acrylate dispersion basis.
Solvent and silicone-free. Colorfast, weather and UV-resistant. Waterproof after
curing. Cannot be processed in rainy or frosty conditions. Do not expose to constant
moisture and UV radiation. Can be painted after curing completely. Can be plastered
and papered over. Suitable for many substrates common in construction (except
for glass, ceramics, natural stone and corrosive metals).
Technical information: Acrylic dispersion base.
Skin formation:* Surface dry after approx. 20 minutes
Note: Do not process FAKKT acrylic in rainy or frosty conditions and do not expose
it to permanent moisture and UV radiation.
15 pieces
Item accessories
Soudal acrylic in hose bag
Application: Soudal acrylic sealants are used to seal lightly loaded, static connection
joints and cracks between masonry and door or window framing or other building
components as well as to seal panel joints, metal seams or panel overlaps.
Properties: Soudal acrylic is a plasto-elastic sealant on an acrylate dispersion basis.
Solvent and silicone-free. Colorfast, weather and UV-resistant. Waterproof after cur-
ing. Do not handle in case of rain or frost. Do not expose to constant moisture and
UV radiation. Can be painted after curing completely. Can be plastered and papered
over. Suitable for many substrates common in construction (except for glass, ceram-
ics, natural stone and corrosive metals). Technical information: Acrylic dispersion
base.
Skin formation:* Surface dry after approx. 20 minutes
Note: Do not process Soudal acrylic in rainy or frosty conditions and do not expose it
to permanent moisture and UV radiation.
12 pieces
624981 white 600 ml Hose bag • • 1
Item accessories

Soudal universal adhesive and sealant Fix ALL
Application: The adhesive and sealant Soudal Fix All Classic is very compatible
with all joints and suitable for many kinds of adhesive work arising from construc-
tion. Main application areas include tension-free structural bonding between metals,
plastics (except PE, PP, PTFE and silicones) and hardwood, sealing and bonding
vibrating structures as well as seals and adhesive connections in car body, container,
and equipment construction.
Properties: The Soudal Fix ALL Classic is a neutral cure, permanently elastic
adhesive and sealing compound on a hybrid polymer basis. Outstanding adhesion
on almost all common building materials and substrates such as various metals,
concrete, masonry, natural stone, ceramic, glass, various plastics (except PE, PP,
PTFE and silicone) polystyrene foam, cork, wood, mirrors with back covers coated
in acetone and much more. Also suitable for moist substrates. Even adheres under
water. Silicone and solvent-free. Colorfast, weather and UV-resistant. Almost
odorless. Very compatible with paint. Without plasticizers. High elasticity and
therefore very well suited for materials with different expansion properties. Very high
initial adhesion and end load (see technical information).
Technical information: 1 K hybrid polymer base.
Initial adhesion:** pure tensile force, dependent on material approx. 7 kg/cm²
End load:** pure tensile force, dependent on material, once fully cured after 20 to
25 hours approx. 20 kg/cm²
Curing speed:* approx. 2 - 3 mm within the first 24 hours
Maximum deformation: 20%. resilience >75%. Elongation at break 750%
Temperature resistance: -40 °C to +90 °C. Usable life 12 months after production
date in cold and dry storage
**) Fix ALL transparent (crystal) has a slightly different composition, does not cure as
quickly and has slightly lower initial and end loads than the other colors.
Advantages:
- the Fix ALL adhesive and sealing compound is extraordinarily versatile and replaces
a large number of sealing compounds and building adhesives
- reduces storage and procurement costs as a result
from 12 pieces c
ontents
624891 white 290 ml • • 1
624892 gray 290 ml • • 1
624893 brown 290 ml • • 1
624896 transparent* 290 ml • • 1
Item accessories
Soudal Fix ALL High Tack power adhesive
Application: The Soudal Fix ALL High Tack power adhesive is used for dynamically
stressed, structural adhesive joints where a high initial load is required. Main
application areas are adhesive and sealing applications in the construction and
metal industries, especially for vibrating connections.
Properties: The Soudal Fix ALL High Tack is a 1-component, permanently elastic
adhesive on a hybrid polymer basis. Outstanding adhesion on almost all com-
mon building materials and substrates such as various metals, concrete, masonry,
ceramic, glass, various plastics (except PE, PP, PTFE and silicone) polystyrene
foam, cork, wood, mirrors with back covers coated in acetone and much more. Also
suitable for moist substrates. Even adheres under water. Silicone and solvent-free.
Colorfast, weather and UV-resistant. Almost odorless. Very compatible with paint.
Fire protection class B2 - test certificate DIN 4102.
1 K hybrid polymer base.
Initial adhesion, pure tensile force, dependent on material 15 kg/cm².
End load, pure tensile force, dependent on material, once fully cured after 20 to
25 hours approx. 35 kg/cm². Skin formation* approx. 5 minutes.
Curing speed* approx. 3 mm within the first 24 hours.
Maximum deformation 20%. Resilience >75%. Elongation at break 400%.
Temperature resistance -40 °C to +90 °C.
Advantage:
- Ideal for overhead installations due to the very rapid and high initial load
Item no. Color Contents Pack unit Price per piece Price per piece from Package
12 pieces contents
Item accessories
Soudal SOUDAFLEX 40 FC PU adhesive and sealing putty
Application: Soudal Soudaflex 40 FC adhesives/sealants are used for almost all

sealing and adhesive applications in the construction and metal industries. Main
application areas include structural connections in vibrating structures, elastic,
tension-equalizing bonding and sealing in container, airplane, railway car or ship
construction as well as sealing contraction joints in concrete floors that are open
to foot and road traffic.
Properties: The Soudal Soudaflex 40 FC is a very high-quality, permanently elastic,
1-component adhesive/sealant on a polyurethane basis. Adheres to many substrates
common in construction such as to most metals, many plastics (except for PP, PE,
PTFE, polystyrene foam, silicone), wood, ceramics and much more Silicone-free,
tension-equalizing, seawater-resistant, can be ground after curing, very compatible
with paint. Not UV-resistant. Fire protection class B2 - test certificate DIN 4102.
1 K polyurethane base.
Resilience: >80%
12 pieces
Soudal AQUAFIX seal-all quick fix sealant
Application: The Soudal Aquafix seal-all is mainly used as repair putty for metals
and roofing and for sealing gutters and downspouts, but also for sealing applications
for chimney connections, roof membranes and much more.
Properties: Soudal Aquafix is a plasto-elastic 1-component sealant on a synthetic
rubber basis. Adheres to almost all common building substrates such as concrete,
aerated concrete, masonry, plaster, metal, brass, copper, ceramics, roof tiles, roof
membranes and bitumen. Even adheres to wet, galvanized sheet metal and under
water. 100% transparent, crystal clear, weather and UV-resistant. Very good resis-
tance to mold growth. Silicone and solvent-free. Compatible with paint after curing,
fire protection class B2-test certificate DIN 4102.
Technical information: 1 K synthetic rubber base.
Skin formation: Surface dry after approx. 20 minutes
15 pieces
Item accessories
Soudal SOUDAFALT roof sealant
Application: The Soudafalt roof sealant is mainly used for repair work in the roof
area. For sealing cracks and seams, for bonding roofing felts and overlaps.
For emergency repairs, even in the rain.
Properties: Soudal Soudafalt is a plasto-elastic 1-component sealant on a bitumen
elastomer basis. Adheres to many of the common building substrates and to
bituminous substrates. Also adheres in wet conditions and even under water.
Higher liquid resistance. Suitable as a cold adhesive for all kinds of roofing felt.
Smooths out unevenness. UV-resistant.
Technical information: 1 K bitumen elastomer base.
Skin formation: Surface dry after approx. 20 minutes
Temperature resistance: -35 °C to + 30 °C
15 pieces
Item accessories
Soudal fire protection silicone B1
Application: The Soudal B1 fire protection silicone is used for seals on building
components that need to comply with fire protection class B1. Main application a reas
include fire protection joints in escape routes or emergency staircases, partitions,
elevator shafts, pipe penetrations, smoke flaps and much more.
Properties: The Soudal B1 is a soft-elastic 1-component, hardly flammable sealant
on a silicone basis. Adheres to common building substrates (except PP, PE, PTFE
and silicone). Colorfast, aging and UV-resistant. Hardly flammable in compliance with
fire protection class B1- test certificate DIN 4102.
Technical information: 1 K polysiloxane benzamide base.
Skin formation: approx. 15 minutes.
Curing speed: 1 mm within the first 24 hours.
Maximum deformation: 25%.
Resilience: >90%.
Elongation at break: 550%.
Temperature resistance: -40 °C to +140 °C.
Item no. Color Contents Pack unit Price per piece Price per piece Package
Item accessories
Soudal high temperature silicone HT-N
Application: The Soudal HT-N high-temperature silicone is used for adhesive and
sealing applications that are constantly exposed to high temperatures. Main applica-
tion areas include boilers, heating channels, ovens, ceramic hotplates, chimneys,
pumps or engines.
Properties: The Soudal HT-N high-temperature silicone is a permanently elastic
1-component sealant on a silicone basis. Adheres to common metals, cast iron,
glass and many plastics (except for PP, PE and PTFE). Colorfast, aging and
UV-resistant. Fire protection class B2 - test certificate DIN 4102.
Technical information: Base 1 K polysiloxane oxime.
Skin formation: approx. 5 minutes
Curing speed: 2 mm within the first 24 hours
Resilience: >80%
15 pieces
Item accessories

Soudal high temperature sealant Gasket Seal
Application: The Soudal Gasket Seal high temperature sealant is used for sealing
applications in the engine compartment and in pumps as well as to form sealing rings
of all shapes and sizes.
Properties: The Soudal Gasket Seal high temperature sealant is a permanently elas-
tic, 1-component sealing compound on a silicone basis. Adheres to different metals,
cast iron, glass and many plastics (except for PP, PE and PTFE). Resistant to high
temperatures, colorfast, aging and UV-resistant. Good resistance to gasoline, diesel,
oils, greases and antifreeze. Replaces solid seals. Also easy to remove after frequent
use. Due to its acidic properties some materials such as copper, lead, brass, lead
and zinc can be affected. Gasket Seal only has low adhesive strength and is not suit-
able for expansion joints. Fire protection class B 2 - test certificate DIN 4102.
Technical information: Base 1 K polysiloxane acetate.
Curing speed: 2 mm within the first 24 hours
Resilience: >80%
Usable life: 12 months after production date in cold and dry
storage
624971 red-brown 310 ml Cartridge • • 1
Item accessories
Soudal CALOFER high temperature putty
Application: The Soudal Calofer high temperature putty is used for sealing and repair
applications on ovens, chimneys, boilers and many other areas where high tempera-
tures arise.
Properties: Soudal Calofer is a 1-component, ready-to-use and extremely heat-
resistant paste on a sodium silicate basis. Adheres to different metals, cast iron,
masonry, concrete, glass and many plastics (except for PP, PE and PTFE). Extremely
heat-resistant. Calofer has no approved deformation after curing and is therefore
not suitable for expansion joints.
Technical information: 1 K sodium silicate base.
Temperature resistance: to +1.500 °C
Item accessories
Soudal silicone remover
Application: The Soudal silicone remover is used to remove cured silicone from
various substrates. Supports mechanical removal of old silicone joints.
Properties: The Soudal silicone remover is a stable gel-like compound that does
not drip and has a pleasant citrus scent. Suitable for many of the common building
substrates such as coated metals, aluminum, ceramic tiles, laminate, glass and
some plastics (not nylon). Can leave stains on porous surfaces.
Technical information: Application time approx. 10 minutes. Consumption approx.
100 ml per 4 - 5 running meter.
Item no. Contents Price per piece Price per Package

piece from contents
12 pieces
624945 100 ml • • 1
Soudal primer
Application: The Soudal 150 primer is used as an adhesion enhancer and is mainly
used for porous substrates and for expansion joint faces with increased exposure to
water.
Properties: Soudal 150 primer is thin and enhances the adhesion of silicone and
MS polymer sealants and porous substrates.
Technical information: Drying time approx. 60 minutes at +20 °C / 65% RH
Consumption approx. 5 l/m²
Item no. Contents Price per Price per Package

6 pieces
62484 1.000 ml • • 1

Soudal Soudabond Easy insulation adhesive
Application: The Soudal Soudabond Easy insulation adhesive is used for wind
suction-resistant bonding of thermal insulation panels. Areas of application include
flat roof*, perimeter and facade insulation*

* For each of the 3 main applications, there are different installation instructions
or legal provisions. See the instructions section.
Properties: With Soudal Soudabond Easy insulation adhesive, rapid, economical,
permanently secure and especially clean processing is possible. No electricity, no
water, no drilling or screwing work, no mixing mortar necessary. Time savings of up
to 30% are possible. High initial adhesion. High safety reserves, hardly flammable,
solvent-free. Economical consumption because application is precise. Rapid curing
(work can already continue after one hour). Adheres to almost all common building
substrates (not to PP, PE, PTFE, silicones). Flexible, does not become brittle. Low
post-expansion. Enormous weight reduction and space saving compared to con-
ventional roofing adhesives or adhesive mortars. Does not rot, aging, mold and rot
resistant. Waterproof but not watertight. Fire protection class B 1 - hardly flammable
DIN 4102. Color: orange.
Technical information: Curing speed* approx. 30 minutes for 30 mm foam strand.
Non-adhesive on the surface* approx. 8 minutes for 30 mm foam strand. Can be cut*
approx. 50 minutes for 30 mm foam strand.
Fully loadable* approx. 12 hours for 30 mm foam strand. Temperature resistance
-40 °C to +90 °C (1 h to 120 °C). Shelf-life 12 months after production date in cold
and dry storage.
Advantages:
- very high cost savings compared to conventional mineral adhesive mortars.
1 carton (12 cans) of Soudal insulation adhesive corresponds to the quantity of one
pallet of adhesive mortar
- No electricity, no water, no drilling or screwing work, no mixing mortar necessary
- enormous storage, transport and application savings
empty cans with new foam cans as soon as possible after removal and cleaning the
entire cycle with Soudal gun foam cleaner prior to longer interruptions.
Note regarding insulation adhesives when used as flat roof insulation and
perimeter insulation (insulation of components in contact with the earth):
The insulation adhesive is an alternative to conventional bitumen adhesive.
The content of the can is enough for approx. 14 m². Read the technical data sheet
for the PU insulation adhesive from Soudal.
Note regarding insulation adhesives when used as facade insulation and base-
ment ceiling insulation:
The insulation adhesive is curing for mortar adhesives. The content of the can is
enough for approx. 7 m². Not for applications subject to approval. Bonding without
mechanical fixing for ceiling insulation. Read the technical data sheet for the PU
insulation adhesive from Soudal.
624848 800 ml Can • • 1
Item accessories
6249018 Metal application gun, long application tube •
Soudal assembly adhesive PS 50 A
Application: The Soudal 50A installation adhesive is used to bond different kinds of
materials to buildings. Main application areas are light adhesive applications such as
wall paneling, panels, skirting boards, PU hard foam trims, styrofoam or polystyrene,
cable ducts and much more.
Properties: The Soudal 50A installation adhesive is a solvent-free adhesive on a
dispersion basis. Adheres to many of the common building substrates such as metal,
aluminum, concrete, masonry, aerated concrete, fiber cement, wood, PU hard foam,
different plastics (except for PP, PE, PTFE, silicones and bitumen). One of the two
surfaces should have suction. For substrates that do not have suction, there is less
adhesion and a longer curing time. Solvent and silicone-free, odorless. Resistant to
moisture after curing. Can be corrected after a few minutes. Can be painted over with
water-based systems.
Technical information: Temperature resistance -20 °C to +60 °C.
Loadable after 24 - 48 hours.
Initial load approx. 50 kg/m² bonded across the entire surface.
62489 310 ml Cartridge • • 1
Item accessories
FAKKT PU construction adhesive
Application: The FAKKT PU construction adhesive is used to bond all common

building elements to each other and to common substrates.
Properties: The FAKKT construction adhesive is a 1-component adhesive on a poly-
urethane basis. Can be used indoors and outdoors. High water resistance - class D4.
Very high initial adhesion and end load. Silicone and solvent-free, aging resistant and
chemical resistant to a large extent, can be painted over. Foams slightly during cur-
ing. Very good adhesion to metal, wood, concrete, masonry, natural stone, ceramic,
hard foam, polystyrene foam, many plastics, coated boards, and much more. Sand,
clean and slightly moisten plastics and metals. Color: beige.
Technical information: Skin formation: approx. 5 minutes
Curing speed: 1 - 2 mm/24 hours
Opening time: approx. 5 minutes
Press time: approx. 15 - 30 minutes
Tensile force: once curing is complete approx. 15 kg/cm² dependent on material.
Temperature resistance -35 °C to +80 °C
Note: PU products contain isocyanate and we recommend using disposable latex
gloves when processing non-cured material.
624895 310 ml Cartridge • • 1
Item accessories

beko PU construction adhesive ALLCON
Application: The Allcon 10 PU construction adhesive is used to bond all common

building elements to each other and to common substrates.
Properties: The Allcon 10 is a 1-component construction adhesive on a polyure-
thane basis. Can be used indoors and outdoors. High water resistance - class D4.
Very high initial adhesion and end load. Silicone and solvent-free, aging resistant and
chemical resistant to a large extent, can be painted over. Foams slightly during cur-
ing. Very good adhesion to metal, wood, concrete, masonry, natural stone, ceramic,
hard foam, polystyrene foam, many plastics, coated boards, and much more. Sand,
clean and slightly moisten plastics and metals.
Color: beige.
Technical information: Skin formation: approx. 3 minutes
Curing speed: 1 - 2 mm / 24 hours
Opening time: approx. 3 minutes
Press time: approx. 10 minutes
Tensile force: once curing is complete approx. 20 kg/cm² dependent on material.
Note: PU products contain isocyanate and we recommend using disposable latex
gloves when processing non-cured material.
624894 310 ml Cartridge • • 1
Item accessories
Soudal Hybrid power adhesive 240 FC
Application: The Soudal 240 FC power adhesive is used as a universally applica

ble sealant and adhesive in the construction industry as well as in steel and metal
construction sectors. Main application areas include tension-free adhesive joints
between metals, plastics (except PP, PE, PTFE, silicones) and hardwood. Structural
bonding of vibrating structures, sealing and adhesive applications in vehicle, railway
car, container, ship or machine construction.
Properties: The Soudal 240 FC power adhesive is a high-quality, neutral, permanent
elastic 1-component adhesive and sealing compound on a hybrid polymer basis.
Outstanding adhesion on almost all common building materials and substrates such
as various metals, brass, zinc, concrete, masonry, natural stone, glass, ceramics,
enamel, various plastics (except PE, PP, PTFE and silicones), cork, polystyrene foam,
hardwood and much more. Also suitable for moist substrates. Water- and seawater-
resistant. Silicone and solvent-free. Colorfast, weather and UV-resistant. Compen-
sates for material stresses. Almost odorless. Very compatible with paint. Fire protec-
tion class B2 - test certificate DIN 4102.
Technical information: 1 K hybrid polymer base. Skin formation* approx. 10 minutes.
Curing speed* approx. 2 - 3 mm within the first 24 hours.
Maximum deformation 20%. Resilience >75%. Elongation at break white -750% /
transparent 250%. Temperature resistance -40 °C to +90 °C.
625111 white 290 ml • • 1
Item accessories
Soudal Fix ALL Turbo construction adhesive
Application: The Soudal Fix All Turbo construction adhesive is used for demanding
adhesive applications in construction where rapid adhesive strength development
and speedy loading is required. Main application areas include tension-free bond-
ing of metal structures, of attached parts to concrete, masonry or wood. In steel
and metal construction as well as in the construction industry and in all secondary
contract work.
Properties: The Soudal Fix All Turbo is a very high-quality, 1-component, perma-
nently elastic construction adhesive on a SMX polymer basis. Very rapid adhesive
strength development. Can already be fully loaded after 3 hours. High final strength.
Outstanding adhesion on almost all common building materials and substrates such
as various metals, concrete, masonry, glass, ceramic, various plastics (except PE,
PP, PTFE and silicone) polystyrene foam, cork, wood and much more. Also suitable
for moist substrates. Silicone and solvent-free. Colorfast, weather and UV-resistant.
Almost odorless. Very compatible with paint. High elasticity and therefore very well
suited for materials with different expansion properties. Fire protection class B2 - test
certificate DIN 4102.
SMX polymer base. Can be corrected* approx. 5 minutes. Solid* after 20 minutes.
Fully loadable* after 3 hours. End load*, pure tensile force, dependent on material,
when fully cured after 3 hours approx. 38 kg/cm². Skin formation* approx. 5 minutes.
Maximum deformation 20%. Resilience >75%. Elongation at break 200%.
Temperature resistance -40 °C to +0 °C. Usable life 12 months after production date
in cold and dry storage.
Advantages:
- get back to work quickly thanks to very rapid handling strength and full loadability
- the Fix ALL construction adhesive Turbo is currently considered (as of summer 2012)
to be the fastest curing and fully loadable MS polymer construction adhesive
Item no. Color Contents Price Price per Package

per piece from contents
piece 12 pieces
624899 white 290 ml • • 1
Soudal SQ application gun
Application: For dispensing from sealant and adhesive cartridges up to 310 ml.

Properties: Skeleton form, light design.
Item no. for cartridges Price Price per Package

up to per piece from contents
piece 12 pieces
624903 310 ml • • 1
Application gun HPS 400 K
Application: For applying 290/310 ml sealant and adhesive cartridges.

Properties: Closed shape, stable design with aluminum pipe.
Plastic screw connections.
Item no. Price per piece Price per piece Package

624901 • • 1

MKT application gun VMP 300
Application: For dispensing from sealant and adhesive cartridges up to 310 ml.

as well as for coaxial injection mortar cartridges up to 300 ml.
Properties: Very powerful metal design with open half-shell.

620355 • 1
Soudal application gun H 40
Application: For applying 290 ml and 310 ml sealant and adhesive cartridges.
Properties: Professional quality for heavy-duty use.
Adjustable, reinforced transmission ratio and push-rod
in an oil bath.
Item no. for cartridges Price per Price per Package

up to piece piece from contents
12 pieces
62490 310 ml • • 1
Application gun HPS 600 A
Application: For dispensing from sealant hose

bag up to 600 ml.
Properties: Closed shape, stable design with
aluminum pipe. Plastic screw connections.
Item no. for hose bag to Price per Price per Package
10 pieces
62492 600 ml • • 1
Compressed air application gun AG 31
Application: For applying 290 ml and 310 ml sealant and adhesive cartridges.
Properties: Light but robust compressed air cartridge application gun made of
impact-resistant plastic. Air volume adjustable. Maximum working pressure 7 bar.

62498 • • 1
Compressed air application gun AG 60 B
Application: For dispensing from sealant hose bag up to 600 ml.

Properties: Light but robust compressed air hose bag application
gun made of impact-resistant plastic. Air volume adjustable.
Maximum working pressure 7 bar.

62499 • • 1
Replacement nozzles
Application: For sealant presses HPS 600K, AG 60B and AG 31.

624920 • • 1
Sopro Racofix quick assembly mortar 8700
Application: The Racofix 8700 quick assembly mortar is used to fill cracks, gaps
and spaces, for fastening railings, ladders, clips, mortar anchors and much more as
well as for sealing leaks in masonry and concrete pipes.
Properties: Cementitious installation mortar. Fast curing, anti-corrosive and water
tight. High bending and compressive strength. Low-chromate according to TRGS 613.
Suitable for almost all clean, load-bearing, solid and mineral substrates in aboveg-
round and underground construction.
Technical information: Processing temperature from +5 °C to max. +25 °C. Opening
time approx. 3 - 5 minutes at +23 °C and 50% RH
Processing: Clean and pre-wet substrates. Mix one part water and 3 parts Racofix
and immediately process. Do not process in frost conditions or on frozen substrates.

contents
625045 5 kg • 1
6250415 15 kg • 1
Item accessories
617038 Plaster mixing bowl •
61703360 Plaster spatula, stainless steel 60 mm •

Soudal compri-joint tape acrylic 300
Application: Soudal acrylic 300 compribands are used for driving rain and windproof
sealing of joints between window frames and masonry, for building joints in concrete,
steel and wooden construction as well as for sealing applications on roofing and
prefabricated house structures indoors and outdoors.
Properties: Soudal acrylic 300 compri-joint tapes are pre-compressed joint sealing
tapes made of PUR flexible foam. Air and windproof at 50% compression, weather-
proof, UV-resistant, can be painted over, self-adhesive on one side. Color: anthracite.
Technical information: Watertight under driving rain 300 Pa. Temperature resistance
-20 °C to +100 °C. Fire protection class B2. Shelf-life 12 months after production
date in unopened packaging in cold and dry storage.
Item no. Belt designation for joint width Roll length Price per Price per Package
30 pieces
62375102 10 x 2 2 - 3 mm 12.5 m • • 1
62375152 15 x 2 2 - 3 mm 12.5 m • • 1
62375153 15 x 3 3 - 5 mm 10 m • • 1
62375104 10 x 4 3 - 7 mm 8m • • 1
62375154 15 x 4 3 - 7 mm 8m • • 1
62375204 20 x 4 3 - 7 mm 8m • • 1
62375156 15 x 6 5 - 9 mm 5.6 m • • 1
62375208 20 x 8 7 - 12 mm 4.3 m • • 1
Soudal compri-joint tape BG 1
Application: Compribands according to the BG1 duty group are used for the perme-
able, driving rain-proof, permanently elastic sealing of heavily loaded attachment
joints outdoors. Main application areas include connection and expansion joints
between window frames and masonry or facades as well as joints in building, timber
house and prefabricated house construction.
Properties: Soudal BG1 compri-joint tapes are pre-compressed joint sealing tapes
made of PUR flexible foam. Permeable, air and windproof at 50% compression,
weatherproof, heat-insulating and noise-reducing, UV-resistant, can be painted over.
Fulfills the En-EV and RAL directives. Self-adhesive on one side. Color: anthracite.
Technical information: Classification DIN 18542/ 2009 BG1- watertight under
driving rain 600 Pa. Temperature resistance -30 °C to +90 °C. Sd value < 0.5 m for
50 mm width.
Fire protection class B1. Long-term resistance 10 years functional guarantee
on the conditions of the manufacturer. Shelf-life 24 months after production date
in unopened packaging in cold and dry storage.
Item no. Belt designa- for joint width Roll length Price per Price per Package
tion joint depth (watertight piece piece from c
ontents
x recommended under driving 30 pieces
joint width rain)
628461012 10/1-2 mm 1-2 mm 20 m • • 1
628461014 10/1-4 mm 1-4 mm 13 m • • 1
628461514 15/1-4 mm 1-4 mm 13 m • • 1
628461526 15/2-6 mm 2-6 mm 12 m • • 1
628461549 15/4-9 mm 4-9 mm 8m • • 1
6284615512 15/5-12 mm 5-12 mm 5.6 m • • 1
6284615615 15/6-15 mm 6-15 mm 4.3 m • • 1
628462049 20/4-9 mm 4-9 mm 8m • • 1
6284620512 20/5-12 mm 5-12 mm 5.6 m • • 1
6284620615 20/6-15 mm 6-15 mm 4.3 m • • 1
6284625920 25/9-20 mm 9-20 mm 3.3 m • • 1
6284630512 30/5-12 mm 5-12 mm 5.6 m • • 1
Multi-function joint sealing tape ISO-BLOCO One
Application: ISO BLOCO One multi-function tapes according to the BG1 duty group
are used for the permeable, driving rain-proof, permanently elastic sealing of heavily
loaded attachment joints outdoors. Main application areas include connection and
expansion joints between window frames and masonry or facades as well as joints.
Properties: The ISO BLOCO One joint sealing tape is an "all in one tape", a one tape
solution for 100% perfect window sealing. Uncomplicated and time-saving 3 level
sealing (internally- airtight and vapor blocking / in the middle, thermal and noise-
insulating / externally-1000 Pa watertight under driving rain). Optimal vapor diffusion
gradient from inside to outside of 50:1 (Sd value gradient) extremely low a-value of
zero. Suitable for passive houses. Fulfills the En-EV and RAL directives. Broad range
of use for joints. Self-adhesive on one side. Color: black.
Technical information: Classification in stress group BG1 and BGR - watertight
under driving rain 1.000 Pa.
Temperature resistance -30 °C to +80 °C. Vapor diffusion gradient 50:1.
Joint permeability coefficient 0 m³ (a-value).
Fire protection class B1.
Shelf-life 12 months after production date in unopened
packaging in cold and dry storage.
Advantages:
-1 tape for all 3 levels resulting in higher cost and time savings
- t he extremely low a-value of zero reduces the manufacture heat loss
- s uitable for the high level of sealing in passive houses
Item no. Belt des- Window Joint Roll length Price per Price per piece Package
ignation depth width piece from 7 pieces contents
6285654210 54/2-10 60 mm 2-10 mm 30 m • • 1
6285664210 64/2-10 70 mm 2-10 mm 30 m • • 1
6285674210 74/2-10 80 mm 2-10 mm 30 m • • 1
6285654212 54/2-12 60 mm 2-12 mm 30 m • • 1
6285664212 64/2-12 70 mm 2-12 mm 30 m • • 1
6285674212 74/2-12 80 mm 2-12 mm 30 m • • 1
6285682212 82/2-12 90 mm 2-12 mm 30 m • • 1
6285654315 54/3-15 60 mm 3-15 mm 20 m • • 1
6285664315 64/3-15 70 mm 3-15 mm 20 m • • 1
6285674315 74/3-15 80 mm 3-15 mm 20 m • • 1
6285654318 54/3-18 60 mm 3-18 mm 20 m • • 1
6285664318 64/3-18 70 mm 3-18 mm 20 m • • 1
6285674318 74/3-18 80 mm 3-18 mm 20 m • • 1
6285682318 82/3-18 90 mm 3-18 mm 20 m • • 1
6285664530 64/5-30 70 mm 5-30 mm 12 m • • 1
6285674530 74/5-30 80 mm 5-30 mm 12 m • • 1
6285682530 82/5-30 90 mm 5-30 mm 12 m • • 1

Window connection film, inside
Application: Window connection films are used to seal window connection joints
in inside of buildings so that they are vapor-tight.
Properties: Polypropylene fleece composite. Closed to vapor diffusion. Self-adhe-
sive strip for adhering to window frames. Can be plastered over on the fleece side.
Color: white. With test certificate from MPA Bau Hannover.
Adhesive strength 12 N/25 mm.
Fire protection class B2
Note: Window frames are bonded using the self-adhesive strip. For bonding
to masonry, we recommend Soudalseal 215 LM. Apply as a bead and press
on to a residual thickness of 3 - 5 mm.
Item no. Width Roll length Price per piece Price per piece Package
6239270 70 mm 50 m • • 1
62392100 10 mm 50 m • • 1
62392150 150 mm 50 m • • 1
Window connection film, outside
Application: Window connection films are used to seal window connection joints
on the outside of buildings so that they are water vapor permeable.
Properties: Polypropylene fleece composite. Permeable. Self-adhesive strip
for adhering to window frames. Can be plastered over on the rough fleece side
of the film composite. UV-resistant for three months. Watertight under driving
rain 600 Pa. Front color: anthracite, back color: white. With test certificate from
MPA Bau Hannover.
Adhesive strength 12 N/25 mm.
Fire protection class B2
Note: Window frames are bonded using the self-adhesive strip. For bonding
to masonry, we recommend Soudalseal 215 LM. Apply as a bead and press
on to a residual thickness of 3 - 5 mm.
Item no. Width Roll length Price per piece Price per piece Package
6239370 70 mm 50 m • • 1
62393100 100 mm 50 m • • 1
62393150 150 mm 50 m • • 1

Katalog Befestigungstechnik 8 2014 Englisch 01

Uploaded by

Copyright:

Available Formats

Katalog Befestigungstechnik 8 2014 Englisch 01

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Katalog Befestigungstechnik 8 2014 Englisch 01

Uploaded by

Copyright:

Available Formats

Keller

201 Bolt anchor option 1 209 Stand-off fastening

2135 Sormat ITH VS cartridge 220 Sanitary fasteners

MKT anchor bolt 773-779 MKT nail anchor 814-815

Fischer express anchor 780-781 Toge ceiling dowel 816

Fischer 787 Fischer Highbond 827-837

Fischer hammerset anchor 789 Fischer injection mortar 837

Fischer 791 Fischer Superbond 838-841

MKT heavy-duty anchor 796-797 Fischer reaction anchor 846-849

Fischer dowels 800 Fischer anchor sleeves 861

MKT hammerset anchor 804-805 Fischer Thermax 867-873

Fischer aerated concrete anchor 806-807 MKT injection system 883-886

KTS 902-904 Mungo Jet Plug 917

Fischer metal frame dowel 905 Fischer 918-919

Concrete frame screw 906-907 Fischer 920

Fischer nail anchor 908 Fischer scaffolding dowel 921

TOTAL FIXX Combi 909 Scaffolding screws 921

FAKKT universal dowel 910-911 Cable ties and 929-932

Fischer dowels 912 Punched installation strip 933

Fischer dowels 913 Trapezoidal sheet metal 934-935

Fischer dowels 913 MTH clamping plates 935

Tox TRI-/TRIKA 914-915 e h

Mungo 915 Sanitary installation technology 937-938

Wood connector 944-957

Assembly support 958

Bonding and filling

Rubber adhesive 974-983

Application guns 983-985

Joint tapes 986-987

Window connection film 988

Optionally with pre-installed normal

Powerful and flexible Advantages:

Option 1 für gerissenen Beton

The shorter bolt with reduced anchoring

Short and practical Advantages:

Option 1 für gerissenen Beton

order online: www.kk-shop.com 767

Approved by the building authorities: European Technical Approval, Option 1,

Steel, highly corrosion-resistant (C) DG 2017

order online: www.kk-shop.com 769

h2 hef, stand. tfix hef, red. tfix

Fischer FAZ II GS with a large U washer

h2 hef, stand. tfix hef, red. tfix

Fischer FAZ II K anchor bolt (short version)

order online: www.kk-shop.com 771

zinc-plated, large washer DG 2014

i Loads for Fischer FAZ II galv. zinc-plated / stainless steel A4 /

Approved by the building authorities: European Technical Approval, Option 1,

Continued on the next page

Approved by the building authorities: European Technical Approval,

Stainless steel A4 DG 2017

MKT bolt anchors B

Approved by the building authorities: European Technical Approval, Option 7,

Type B with threaded bolt and nut

Continued on the next page

Type B with threaded bolt and nut

Continued on the next page

i Loads for MKT bolt anchor B galv. zinc-plated

Continued on the next page

i Loads for Fischer FAZ II galv. zinc-plated / stainless steel A4 /

i Loads for EXA bolt anchor galv. zinc-plated and