05 MastsBooms

MASTS
& BOOMS
Spare parts for sideshifters
MASTS & BOOMS
SPARE PARTS FOR SIDESHIFTER ATIB 108.25

SLIDING PIECES VERSION, FEM 2, CAPACITY: 2500 KG
1 2
6 3
3
8
5 4 17
9 7
3
10
11
12 18 19 20 21 22 23 24 25
13
16 14
15
Type: 03GFA2C3002–03GFA2C3028
Fig Description Quantity Remarks REF

Sideshifter
1 Upper bearing 4 Material: nylon 100MC9011
1 Upper bearing 4 Material: brass 100MC9012
2 Cylinder support Not available
3 Snap ring 4 100MC9013
4 Pin 1 100MC9014
5 Cylinder 1 See cylinder section 100MC9015
6 Pin 1 100MC9016
7 Nut 1 100MC9017
8 Cylinder bracket 1 100MC9018
9 Grease nipple 2 100MC9019
10 Frame Not available
11 Hook*** 2 100MC9020
12 Lower bearing* 2 Material: nylon 100MC9021
12 Lower bearing** 2 Material: brass 100MC9022
13 Washer*** 4 100MC9023
14 Bolt*** 4 100MC9024
15 Bolt 1 100MC9025
16 Washer 1 100MC9026
* Bearing kit for sideshifter (incl 1 (4x) & 12 (2x)) 1 Material: nylon 100MC9027
** Bearing kit for sideshifter (incl 1 (4x) & 12) 1 Material: brass 100MC9028
*** Hook kit for sideshifter (incl 11 (1x), 13 (2x) & 14 (2x)) 2 Set for 1 hook 100MC9029
Cylinder of sideshifter
Cylinder complete 1 Stroke: 200 mm 100MC9015
17 Tube 1 100MC9030
18 Bracket 1 100MC9031
19 Nut 1 100MC9032
20 Wiper ring* 1 Included in seal kit
21 Seal* 1 Included in seal kit
22 Cylinder rod guide 1 100MC9033
24 Cylinder rod 1 100MC9034
25 Piston seal* 1 Included in seal kit
* Seal kit (incl 20 (1x), 21 (1x), 23 (1x) & 25 (1x)) 1 100MC9035
590
MASTS & BOOMS

1 2
6 3
3
8
5 4 17
9 7
3
10
11
12 18 19 20 21 22 23 24 25
13
16 14
15
Type: 03GLL3C3003–03GLL3C3020

Sideshifter
1 Upper bearing 4 Material: nylon 100MC9036
1 Upper bearing 4 Material: brass 100MC9037
2 Frame 1 Not available
4 Pin 1 100MC9039
5 Cylinder 1 See cylinder section 100MC9040
6 Pin 1 100MC9041
7 Bush 1 100MC9042
8 Cylinder bracket 1 100MC9043
11 Hook*** 2 100MC9044
13 Washer*** 4 100MC9023
14 Bolt*** 4 100MC9045
15 Bolt 1 100MC4525
16 Washer 1 100MC9046
** Bearing kit for sideshifter (incl 1 (4x) & 12) 1 Material: brass 100MC9048
*** Hook kit for sideshifter (incl 11 (1x), 13 (2x) & 14 (2x)) 2 Set for 1 hook 100MC9049
Cylinder complete 1 Stroke: 200 mm 100MC9050
17 Tube 1 100MC9051
19 Nut 1 100MC9042
22 Cylinder rod guide 1 100MC9053
591
MASTS & BOOMS

1 2 4 5 6 7
13 14 15 16 17 18
8 9
10 19 20 17 16 15 14 13
11
12
10
11
12
Type: 03HFA2C3002–03HFA2C3028

Sideshifter
1 Upper bearing* 4 Material: nylon 100MC9011
1 Upper bearing** 4 Material: brass 100MC9012
2 Cylinder support 1 On request, give serial n° Not available
3 Frame 1 On request, give serial n° Not available
5 Washer 4 100MC9057
6 Bolt 4 100MC9058
8 Lower hook*** 2 100MC9020
10 Washer*** 4 100MC9059
11 Washer*** 4 100MC9060
12 Bolt*** 4 100MC9061
** Bearing kit for sideshifter (incl 1 (4x) & 9 (2x)) 1 Material: brass 100MC9062
*** Hook kit for sideshifter (incl 8 (2x), 10 (2x), 11 (2x) & 2 Set for 1 hook 100MC9063
12 (2x))
Cylinder assembly 1 Stroke: 200 mm 100MC9064
16 Plug 2 100MC9068
17 O‑ring* 2 Included in seal kit
18 Tube 1 100MC9070
19 Gasket set* 1 Included in seal kit
20 Piston 1 100MC9072
592
MASTS & BOOMS

1 2 4 5 6 7
13 14 15 16 17 18
8 9
10 19 20 17 16 15 14 13
11
12
10
11
12
Type: 03HLL3C003–03HLL3C3020

Sideshifter
1 Upper bearing** 4 Material: brass 100MC9037
2 Cylinder support 1 On request, give serial n° Not available
3 Frame 1 On request, give serial n° Not available
6 Bolt 4 100MC9075
8 Hook*** 2 100MC9044
10 Washer*** 4 100MC9076
11 Washer*** 4 100MC9077
12 Bolt*** 4 100MC9078
** Bearing kit for sideshifter (incl 1 (4x) & 9 (2x)) 1 Material: brass 100MC9079
12 (2x))
16 Plug 2 100MC9085
18 Tube 1 100MC9087
19 Gasket set* 1 Included in seal kit
20 Piston 1 100MC9089
Seal kit (incl 14 (2x), 15 (2x), 17 (2x) & 19 (1x)) 1 100MC9090
593
MASTS & BOOMS
SPARE PARTS FOR SIDESHIFTER BOLZONI

FEM 2, CAPACITY: 2500 KG
21 20 19 18 17 15 16 14
13
12
1
10 8
5 11
9 7
6 4
3
Type: HN25‑HN4/HN4 800–HN4 1550

1 Frame 1 On request, give serial n°
2 Cylinder support 1 Width of sideshifter: 800–900 mm 100MC9091
3 Screw** 4 100MC9095
4 Washer** 4 100MC9096
5 Grease nipple* 4 100MC9097
6 Lower pad* 2 100MC9098
7 Lower hook pad* 2 100MC9099
8 Lower hook* 2 100MC9100
9 Self‑locking nut** 4 100MC9101
10 Split pin 2 100MC9102
11 Upper pad* 2 100MC9103
12 Cylinder body***/**** 1 100MC4480
13 Piston***/**** 1 100MC4478
14 Seal***/**** 1 100MC9104
15 Seal***/**** 1 100MC9105
16 Seal***/**** 2 100MC9106
17 Cylinder cup link***/**** 2 100MC4465
18 Cap metric version*** 2 100MC9107
18 Cap JIC version**** 2 100MC9108
19 Seal**** 2 100MC9109
20 Scraper***/**** 2 100MC9110
21 Rod***/**** 2 100MC4471
Seal complete***/**** 1 100MC4483
* Bearing kit (incl 5 (4x), 6 (2x), 7 (2x) & 11 (2x)) 1 100MC9111
** Hook kit (complete for 1 hook, incl 3 (2x), 4 (2x), 8 (1x) & 2 Set for 1 hook 100MC9112
9 (2x))
*** Cylinder complete with metric thread connection (incl 1 100MC9113
12–18 & 20–22)
**** Cylinder complete with JIC thread connection (incl 1 100MC9114
12–17 & 19–22)
594
MASTS & BOOMS

21 20 19 18 17 15 16 14
13
12
1
10 8
5 11
9 7
6 4
3
Type: HN35‑HN5/HN5 1100–HN5 1350

3 Screw** 4 100MC9118
4 Washer** 4 100MC9119
7 Lower hook pad* 2 100MC9121
8 Lower hook** 2 100MC9122
9 Self‑locking nut** 4 100MC9123
10 Split pin 2 100MC9102
11 Upper pad* 2 100MC9124
12 Cylinder body***/**** 1 100MC4480
13 Piston***/**** 1 100MC4478
14 Seal***/**** 1 100MC9104
15 Seal***/**** 1 100MC9105
16 Seal***/**** 2 100MC9106
17 Cylinder cup link***/**** 2 100MC4465
18 Cap metric version*** 2 100MC9107
18 Cap JIC version**** 2 100MC9108
19 Seal**** 2 100MC9109
20 Scraper***/**** 2 100MC9110
21 Rod***/**** 2 100MC4471
Seal complete***/**** 1 100MC4483
* Bearing kit (incl 5 (4x), 6 (2x), 7 (2x) & 11 (2x)) 1 100MC9125
** Hook kit (complete for 1 hook, incl 3 (2x), 4 (2x), 8 (1x) & 2 Set for 1 hook 100MC9126
9 (2x))
*** Cylinder complete with metric thread connection (incl 1 100MC9113
12–18 & 20–22)
**** Cylinder complete with JIC thread connection (incl 1 100MC9114
12–18 & 20–22)
595
MASTS & BOOMS

21 20 19 18 17 15 16 14
13
12
1
10 8
5 11
9 7
6 4
3
Type: HN49‑HN6/HN6 1100–HN6 2000

3 Screw*** 4 100MC9131
4 Washer*** 4 100MC9119
5 Grease nipple*/** 4 100MC9097
6 Lower pad*/** 2 100MC9132
7 Lower hook pad*/** 2 100MC9099
9 Self‑locking nut*** 4 100MC9123
10 Elastic pin 2 100MC9133
11 Upper pad* 2 Width of sideshifter: < 1600 mm 100MC9124
11 Upper pad** 4 Width of sideshifter: > 1600 mm 100MC9124
12 Cylinder body****/***** 1 100MC9134
13 Piston****/***** 1 100MC4497
14 Seal****/***** 1 100MC4498
15 Seal****/***** 1 100MC4496
16 Seal****/***** 2 100MC4495
17 Cylinder cup link****/***** 2 100MC9135
18 Cap metric version**** 2 100MC9136
18 Cap JIC version***** 2 100MC9137
19 Seal***** 2 100MC9110
20 Scraper****/***** 2 100MC4492
21 Rod****/***** 2 100MC4491
Seal complete****/***** 1 100MC4500
* Bearing kit (incl 5 (4x), 6 (2x), 7 (2x) & 11 (2x)) 1 Width of sideshifter: < 1600 mm 100MC9138
** Bearing kit (incl 5 (4x), 6 (2x), 7 (2x) & 11 (2x)) 1 Width of sideshifter: > 1600 mm 100MC9139
*** Hook kit (complete for 1 hook, incl 3 (2x), 4 (2x), 8 (1x) & 2 Set for 1 hook 100MC9126
9 (2x))
**** Cylinder complete with metric thread connection (incl 3, 1 100MC9140
4, 8 & 9)
***** Cylinder complete with JIC thread connection (incl 1 100MC9141
12–18 & 20–22)
596
MASTS & BOOMS

1
2
6 7 8 9
3
4
5
12 27
10
13
11 15 16 14
17 18 19 20 21 22 23 24 25 26
Type: SL4

2 Upper bearing** 4 100MC9142
3 Cylinder support 1 Width of sideshifter: < 1000 mm 100MC9143
3 Cylinder support 1 Width of sideshifter: > 1000 mm 100MC9144
4 Screw 1 100MC4457
5 Safety washer 1 100MC9145
6 Screw*** 2 M16 x 16 100MC4459
7 Screw*** 2 M16 x 30 100MC4460
8 Screw*** 4 100MC9146
9 Elastic washer*** 4 100MC4463
10 Lower hook*** 2 100MC9147
11 Cylinder cup link 2 100MC4465
12 Washer*** 2 100MC4466
13 Lower pad** 2 100MC9148
14 Hook fixed plate*** 4 100MC4468
16 Screw 4 100MC4470
17 Rod 2 100MC4471
18 Wiper ring* 2 100MC4472
19 Seal* 2 100MC4473
20 Left plug 1 100MC4474
21 Bushing 2 100MC4475
22 Ring* 2 100MC4476
23 O‑ring* 2 100MC4477
24 Piston 2 100MC4478
25 Seal* 2 100MC4479
26 Cylinder body 1 100MC4480
27 Right plug 1 100MC4481
Cylinder assembly 1 100MC4482
* Seal kit (incl 18 (2x), 19 (2x), 22 (2x), 23 (2x) & 25 (2x)) 1 100MC4483
** Bearing kit (incl 2 (4x) & 13 (2x)) 1 100MC9149
*** Hook kit (complete for 1 hook, incl 6 (1x), 7 (1x), 8 (2x), 2 Set for 1 hook 100MC9150
9 (2x), 10 (1x) & 14 (2x))
597
MASTS & BOOMS

1
2
6 7 8 9
3
4
5
12 27
10
13
11 15 16 14
17 18 19 20 21 22 23 24 25 26
Type: SL5

3 Cylinder support 1 Width of sideshifter: ≤ 1150 mm 100MC4455
4 Screw 1 100MC4457
6 Screw***/**** 2 M16 x 16 100MC4459
7 Screw*** 2 M16 x 30, width of sideshifter: ≤ 1150 mm 100MC4460
7 Screw***/**** 2 M16 x 40, width of sideshifter: > 1150 mm 100MC4461
8 Screw***/**** 4 100MC4462
9 Elastic washer***/**** 4 100MC4463
10 Lower hook***/**** 2 100MC4464
12 Washer***/**** 2 100MC4466
13 Lower pad** 2 100MC4467
14 Hook fixed plate***/**** 4 100MC4468
16 Screw 4 100MC4470
17 Rod 2 100MC4471
22 Ring* 2 Included in seal kit
24 Piston 2 100MC4478
27 Cylinder assembly 1 100MC4482
*** Hook kit (complete for 1 hook, incl 6 (1x), 7 (1x), 8 (2x), 2 Width of sideshifter: ≤ 1150 mm set for 100MC4485
9 (2x), 10 (1x), 12 (1x) & 14 (2x)) 1 hook
**** Hook kit (incl 6 (1x), 7 (1x), 8 (2x), 9 (2x), 10 (1x), 12 (1x) & 2 Width of sideshifter: > 1150 mm set for 100MC4486
14 (2x)) 1 hook
598
MASTS & BOOMS

1
2
6 7 8 9
3
4
5
12 27
10
13
11 15 16 14
17 18 19 20 21 22 23 24 25 26
Type: SL6

3 Cylinder support 1 Width of sideshifter: > 1350 ≤ 1660 mm 100MC4488
4 Screw 1 100MC4457
6 Screw*** 2 M16 x 16 100MC4459
7 Screw*** 2 M16 x 40 100MC4461
8 Screw*** 4 100MC4490
9 Elastic washer*** 4 100MC4458
10 Lower hook*** 2 100MC4464
12 Washer*** 2 100MC4466
13 Lower pad** 2 100MC4467
14 Hook fixed plate*** 4 100MC4468
16 Screw 4 100MC4470
17 Rod 2 100MC4491
22 Ring* 2 Included in seal kit
24 Piston 2 100MC4497
*** Hook kit (incl 6 (1x), 7 (1x), 8 (2x), 9 (2x), 10 (1x), 12 (1x) & 2 Set for 1 hook 100MC4501
14 (2x))
599
MASTS & BOOMS

4
2
5
6
8 7
10 11 12
Type: SU2

1 Upper bearing* 5 100MC9151
2 Cylinder support 1 On request, give serial n°
3 Cylinder 1 100MC9152
4 Spacer 1 100MC9153
8 Nut** 4 100MC9156
10 Screw** 2 100MC4517
11 Washer** 4 100MC9157
12 Bolt** 4 100MC9158
Cylinder seal kit 1 100MC9159
* Bearing kit for sideshifter (incl 1 (5x) & 9 (2x)) 1 100MC9160
** Hook kit for sideshifter (incl 7 (1x), 8 (2x), 10 (1x), 2 Set for 1 hook 100MC9161
11 (2x) & 12 (2x))
600
MASTS & BOOMS

4
2
5
6
8 7
10 11 12
Type: SU4

8 Nut** 2 100MC9156
10 Screw** 2 100MC4517
11 Washer** 4 100MC9157
12 Bolt** 4 100MC9158
11 (2x) & 12 (2x))
601
MASTS & BOOMS

4
2
5
6
8 7
10 11 12
Type: SU5

8 Nut** 4 100MC4515
10 Screw** 2 100MC4517
11 Washer** 4 100MC4518
12 Bolt** 4 100MC4519
11 (2x) & 12 (2x))
602
MASTS & BOOMS

4
2
5
6
8 7
10 11 12
Type: SU6

2 Cylinder support 1 Width of sideshifter: ≥ 1500 mm 100MC4510
8 Nut** 4 100MC4515
10 Screw** 2 100MC4517
11 Washer** 4 100MC4518
12 Bolt** 4 100MC4519
11 (2x) & 12 (2x))
603
MASTS & BOOMS

4
2
5
6
10
8 7
11
10 11 12
Type: SU7

3 Cylinder 1 Stroke: 200 mm 100MC4511
8 Nut** 4 100MC9164
9 Lower pad Not available
10 Roller assembly* 3 100MC9165
11 Screw 6 100MC9166
12 Screw 2 100MC9167
13 Washer** 4 100MC4463
14 Bolt** 4 100MC9168
* Bearing set for sideshifter (incl 1 (7x) & 10 (3x)) 1 100MC9169
** Hook kit for sideshifter (incl 7 (1x), 8 (2x), 13 (2x) & 2 Set for 1 hook 100MC9170
14 (2x))
604
MASTS & BOOMS

4
2
5
6
10
8 7
11
10 11 12
Type: SU8

8 Nut** 4 100MC9164
9 Lower pad Not available
10 Roller assembly* 3 100MC9165
11 Screw 6 100MC9166
12 Screw 2 100MC9167
13 Washer** 4 100MC4463
14 Bolt** 4 100MC9168
* Bearing set (incl 1 (7x) & 10 (3x)) 100MC9169
14 (2x))
605
MASTS & BOOMS
SPARE PARTS FOR SIDESHIFTER CAM ATTACHMENTS

8 7
5
9
6
9 5 11
13
12
1
3
2
10
Type: SH225.P

1 Upper slide plate 4 100MC9171
2 Anchor bracket L‑600 1 Width of sideshifter: 800–900 mm 100MC9172
2 Anchor bracket L‑944 1 Width of sideshifter: 1250 mm 100MC9176
3 Piston rod 2 100MC9178
4 Spring pin 4 100MC9179
5 Greaser 6 100MC9180
6 Frame 1 Not sold as
spare part
7 Lower slide plate 2 Includes item 5 100MC9181
8 Lower hook 2 100MC9196
9 Bolt, nut, washer assembly 4 100MC9182
10 Seal kit 1 Up to serial n° 0001/13/SH 100MC9183
10 Seal kit 1 As from serial n° 0001/13/SH 100MC9184
11 Plastic slide plate 1 set Includes item 1, 5 & 7 100MC4651
(incl 6 pcs)
13 Fitting assembly 2 100MC9188
Hook kit (incl 8 (1x), 9 (2x) 2 101MC3450
606
MASTS & BOOMS

8 7
5
9
6
9 5 11
13
12
1
3
2
10
Type: SH335.P
Fig Description Quantity REF

1 Upper slide plate 4 100MC9189
3 Piston rod 2 100MC9178
6 Frame 1 On request, give type and serial n° Not sold as
spare part
7 Lower slide plate 2 Includes item 5 100MC9195
9 Bolt, nut, washer assembly 4 100MC9182
10 Seal kit 1 Up to serial n° 0001/13/SH 100MC5061
11 Plastic slide plate 1 set Includes item 1, 5 & 7 100MC9200
(incl 6 pcs)
13 Fitting assembly 2 100MC9188
Hook kit (incl 8 (1x), 9 (2x) 2 101MC3450
607
MASTS & BOOMS

SLIDING PIECES VERSION, FEM 2, CAPACITY 2500 KG
10
8 9
4 1B
12B
3
7
1
1A
12
6 5 11 2 12A
Type: TRF 225

1A Cylinder 1 100MC9187
1B Cylinder 1 Width of sideshifter: 800 mm 100MC9202
1B Cylinder 1 Width of sideshifter: 900–940 mm 100MC9203
1B Cylinder 1 Width of sideshifter: > 1400 mm 100MC9206
2 Pin 2 100MC9207
3 Fixed extruded 1 For width of sideshifter: 800 mm 100MC9208
For cylinder type 1A
3 Fixed extruded 1 For width of sideshifter: 900–940 mm 100MC9209
3 Fixed extruded 1 For width of sideshifter: > 1400 mm 100MC9212
4 Upper nylon slide* 4 100MC9213
5 Screw** 4 100MC9214
6 Washer** 4 100MC9215
7 Bottom hook** 2 100MC9216
8 Bottom nylon slide* 2 100MC9217
9 Screw 2 100MC9218
11 Safety screw 1 100MC9220
12 Rod 2 For cylinder type: 1 100MC9221
12A Rod 2 For cylinder type: 1A 100MC9178
12B Seal kit 1 For cylinder type: 1B 100MC9222
Rod 2 For cylinder type: 1 100MC9223
Seal kit 1 For cylinder type: 1A 100MC9183
Seal kit 1 For cylinder type: 1A, as from 100MC9184
serial n° 0690/13/TRF up to 0019/14/TRF
Seal kit 1 For cylinder type: 1B, as from 100MC9224
serial n° 0063/16/TRF
* Bearing kit (incl 4 (4x) & 8 (2x)) 1 100MC9225
** Hook kit complete for 1 hook (incl 5 (2x), 6 (2x) & 7 (1x)) 1 100MC9226
608
MASTS & BOOMS

10
8 9
1B
4 12B
7
3
1
1A
12
6 5 11 2 12A
Type: TRF 335.P

1A Cylinder 1 100MC9187
1B Cylinder 1 Width of sideshifter: 1000 mm 100MC9227
2 Pin 2 100MC9207
3 Fixed extruded 1 For width of sideshifter: 1000 mm 100MC9230
For cylinder type: 1A
4 Upper nylon slide* 4 100MC9233
5 Screw** 4 100MC9234
6 Washer** 4 100MC9215
7 Bottom hook** 2 100MC9235
8 Bottom nylon slide* 2 100MC9217
9 Screw 2 100MC9236
12 Rod 2 For cylinder type: 1 100MC9223
12A Rod 2 For cylinder type: 1A 100MC9178
12B Rod 2 For cylinder type: 1B 100MC9222
Seal kit 1 For cylinder type: 1 100MC9223
Seal kit 1 Up to serial n° 0690/12/TRF 100MC9183
Seal kit 1 As from serial n° 0690/13/TRF 100MC9184
Seal kit 1 As from serial n° 0200/16/TRF and up 100MC9224
For cylinder type: 1B
* Bearing kit (incl 4 (4x) & 8 (2x)) 1 100MC9237
** Hook kit complete for 1 hook (incl 5 (2x), 6 (2x) & 7 (1x)) 1 100MC9238
609
MASTS & BOOMS

5 8
4
9 2
1
3
7 6
Type: TRF 350.P

1 Cylinder 1 Length: 600 mm, width of sideshifter: 100MC9239
1000 mm
1070–1200 mm
1260–1350 mm
1560–2000 mm
> 1900 mm
2 Upper nylon slide* 4 For sideshifter width: ≤ 1200 mm 100MC9233
2 Upper nylon slide** 6 For sideshifter width: ≥ 1260 mm 100MC9233
3 Bottom hook*** 2 100MC9235
4 Bottom nylon slide*/** 4 100MC9217
5 Greaser 3 For sideshifter width: 1000–1350 mm 100MC9219
5 Greaser 5 For sideshifter width: 1560–2000 mm 100MC9219
6 Screw*** 4 100MC9234
7 Washer*** 4 100MC9215
9 Pin 4 100MC9245
Seal kit 1 100MC9246
* Bearing kit (incl 2 (4x) & 4 (4x)) For sideshifter width: < 1260 mm 100MC9247
** Bearing kit (incl 2 (6x) & 4 (4x)) For sideshifter width: ≥ 1260 mm 100MC9248
*** Hook kit complete for 1 hook (incl 3 (1x), 6 (2x) & 7 (2x)) 2 100MC9249
610
MASTS & BOOMS

SPARE PARTS FOR SIDESHIFTER CASCADE
1
2 4
5
6 16
3 17 26 27
25
23 24
7 21 22
28 20
19
8 9 4 18
5
29
10
11 12 13 14 15
Type: 30DSS

Sideshifter
1 Upper bearing*/** 2 100MC9250
2 Support 1 On request, give serial n°
4 Cotter hairpin 2 100MC9252
5 Pin 2 100MC9253
6 Fitting (JIC thread) 2 100MC9254
6 Fitting (metric thread) 2 100MC4342
8 Nut*** 4 100MC9255
10 Lower bearing** 2 100MC9257
11 Washer 4 100MC9258
12 Bolt 4 100MC9259
13 Support 2 100MC9260
14 Washer*** 4 100MC4321
15 Bolt*** 4 100MC4350
* Upper bearing kit for sideshifter (incl 1 (2x)) 1 100MC9261
** Bearing kit for sideshifter (incl 1 (2x) & 10 (2x)) 1 100MC9262
15 (2x))
16 Shell 1 100MC9264
17 Washer 1 100MC9265
18 Nut 1 100MC4502
19 Piston 1 100MC9266
23 Retainer 1 100MC9270
24 Retaining ring 1 100MC9271
25 Snap ring* 1 Included in seal kit
* Seal kit (incl 20 (1x), 21 (1x), 22 (1x), 25 (1x), 26 (1x), 1 100MC9276
27 (1x) & 28 (1x))
611
MASTS & BOOMS

1
2 4
5
6 16
3 17 26 27
25
23 24
7 21 22
28 20
19
8 9 4 18
5
29
10
11 12 13 14 15
Type: 55DSS

Sideshifter
5 Pin 2 100MC9253
8 Nut*** 4 100MC9255
11 Washer 4 100MC9258
12 Bolt 4 100MC9259
14 Washer*** 4 100MC4321
15 Bolt*** 4 100MC4350
15 (2x))
16 Shell 1 100MC9264
17 Washer 1 100MC9265
18 Nut 1 100MC4502
19 Piston 1 100MC9266
22 O‑ring* 1 100MC9269
27 (1x) & 28 (1x))
612
MASTS & BOOMS

8 7
1
3
2
4
5
6
9 10 11
12
Type: 55D71568–55D71557

Sideshifter
1 Upper bearing nylon** 2 100MC9293
2 Lower bearing nylon** 2 100MC9294
3 Nut* 4 100MC9295
5 Washer* 4 100MC9297
6 Capscrew* 4 100MC9298
8 Roll pin 2 100MC4567
* Hook kit (complete for 1 hook, incl 3 (2x), 4 (1x), 5 (2x), 2 Set for 1 hook 100MC9299
6 (2x))
** Bearing kit for sideshifter (incl 1 (2x) & 2 (2x)) 1 Width of sideshifter: 780–840 mm 100MC9300
Cylinder assembly 1 Width of sideshifter: 859–899 mm 100MC9301
9 Rod seal* 2 100MC9306
10 O‑ring* 2 100MC9307
11 Rod wiper seal* 2 100MC9308
* Seal kit (incl 9 (2x), 10 (2x), 11 (2x)) 1 100MC9310
613
MASTS & BOOMS

1
2 4
5
6 16
3 17 26 27
25
23 24
7 21 22
28 20
19
8 9 4 18
5
29
10
11 12 13 14 15
Type: 60DSS

Sideshifter
5 Pin 2 100MC9253
8 Nut*** 4 100MC9255
11 Washer 4 100MC4463
12 Bolt 4 100MC9323
14 Washer*** 4 100MC4321
15 Bolt*** 4 100MC9324
15 (2x))
16 Shell 1 100MC9264
17 Washer 1 100MC9265
18 Nut 1 100MC4502
19 Piston 1 100MC9266
27 (1x) & 28 (1x))
614
MASTS & BOOMS

1 2 1
6 15 14 13 12
7 12 13 14 15
3
4 5
11
10 8 9
Type: 65D33801, 65D33802, 65D33803, 65D33804, 65D33805, 65D33806, 65D33807, 65D33808

Sideshifter
2 Cylinder 1 See cylinder section
5 Nut 4 100MC4318
7 Lower bearing* 2 100MC4556
8 Washer** 4 100MC4321
9 Bolt** 4 100MC4557
10 Bolt 3 100MC4558
** Hook kit for sideshifter (incl 6 (1x), 8 (2x) & 9 (2x)) 2 100MC4560
Cylinder assembly 1 For 65D33801 100MC4561
Cylinder assembly 1 For 65D33802 100MC4562
Cylinder assembly 1 For 65D33803, 65D33804, 65D33805, 100MC4563
65D33806
Cylinder assembly 1 For 65D33807, 65D33808 100MC4564
11 Rod seal* 2 100MC4565
12 O‑ring* 2 100MC4566
* Cylinder seal kit (incl 11 (2x), 12 (2x) & 13 (2x)) 1 100MC4568
615
MASTS & BOOMS

1
2 4
5
6 16
3 17 26 27
25
23 24
7 21 22
28 20
19
8 9 4 18
5
29
10
11 12 13 14 15
Type: 100DSS

Sideshifter
5 Pin 2 100MC9329
Fitting (metric thread) 2 100MC4342
8 Nut*** 4 100MC9255
11 Washer 4 100MC4463
12 Bolt 4 100MC9323
14 Washer*** 4 100MC4321
15 Bolt*** 4 100MC9324
15 (2x))
16 Shell 1 100MC9334
17 Washer 1 100MC9265
18 Nut 1 100MC9335
19 Piston 1 100MC9336
22 O‑ring* 1 100MC9339
27 (1x) & 28 (1x))
616
MASTS & BOOMS

3
1
2
6
5 16 27
24 25 26
4 22 23
21
7
8 19 20
17 18
9 10
12 6
11 28
13 14 15
Type: 120DSS

Sideshifter
5 Pin 1 100MC9329
7 Fitting JIC 2 100MC9254
9 Nut 4 100MC4502
12 Pin 1 100MC9329
14 Washer** 4 100MC4321
15 Bolt** 4 100MC9348
15 (2x))
16 Shell 1 100MC9334
17 Nut 1 100MC9335
18 Piston 1 100MC9336
20 Back up ring* 1 Included in seal kit
23 Back up ring* 1 Included in seal kit
24 Ring steel 1 100MC9341
25 Snap ring 1 Included in seal kit
* Seal kit (incl 19 (1x), 20 (1x), 22 (1x), 23 (1x), 1 100MC9346
26 (1x) & 27 (1x))
617
MASTS & BOOMS

2 12 13 14 15 11
3
4 16
5 6
23 21 20 19 18 17
22
7
10 11 15 16 17 18 19 20
8 9
Type: 40ESS

Sideshifter
3 Cylinder 1
4 Nut** 4 See cylinder section 100MC4318
7 Washer** 4 100MC4321
8 Bolt** 4 100MC4350
** Hook kit for sideshifter (incl 4 (2x), 5 (1x), 7 (2x) & 8 (2x)) 2 Set for 1 hook 100MC4361
10 Wiper* 2 Included in seal kit
11 Bearing ring* 2 Included in seal kit
13 Rod 1 100MC4334
18 Rod seal* 2 Included in seal kit
20 Cylinder shell 1 Not available
21 Fitting 2 Thread: n° 6 JIC 100MC4341
21 Fitting 2 Thread: 10 mm; L‑series 100MC4342
21 Fitting 2 Thread: 10 mm; S‑series 100MC9290
22 Spacer 2 100MC4346
* Seal kit (incl 10 (2x), 11 (2x), 12 (1x), 16 (2x), 18 (2x) & 1 100MC9292
19 (2x))
618
MASTS & BOOMS

2 12 13 14 15 11
3
4 16
5 6
23 21 20 19 18 17
22
7
10 11 15 16 17 18 19 20
8 9
Type: 55ESS

Sideshifter
1 Upper bearing* 2 Width of sideshifter: 736–1045 mm 100MC4316
5 Nut** 2 100MC4318
8 Washer** 4 100MC4321
9 Bolt** 2 100MC4350
* Bearing kit for sideshifter (incl 1 (2x) & 7 (2x)) 1 Width of sideshifter: 736–1045 mm 100MC4503
* Bearing kit for sideshifter (incl 1 (4x) & 7 (2x)) 1 Width of sideshifter: 1046–1300 mm 100MC4324
11 Wiper*** 2 Included in seal kit
12 Bearing ring*** 2 Included in seal kit
13 Piston seal*** 1 Included in seal kit
14 Rod 1 100MC4334
17 Wiper ring*** 2 Included in seal kit
19 Rod seal*** 2 Included in seal kit
20 O‑ring*** 2 Included in seal kit
22 Fitting 2 Thread: 10 mm, L‑series 100MC4342
22 Fitting 2 Thread: 12 mm, L‑series 100MC4343
22 Fitting 2 Thread: 10 mm, S‑series 100MC4344
22 Fitting 2 Thread: 12 mm, S‑series 100MC4345
*** Seal kit (incl 11 (2x), 12 (2x), 13 (1x), 17 (2x), 19 (2x) & 100MC4347
20 (2x))
619
MASTS & BOOMS
SPARE PARTS
SpAre pArtS For
FOR SideSHiFter
SIDESHIFTER cAScAde
CASCADE
SLIDING PIECES VERSION,
Sliding pieceS VerSion, FEM 3,
FeM 3, CAPACITY: 3000 KG
cApAcity: 3000 Kg
Type: 60ESS
1 2
7
4 5
10 8 9
15 11
12 13 14
16
23 21 20 19 18 17
22
11 15 16 17 18 19 20
620
MASTS & BOOMS

Type: 60ESS

Sideshifter
5 Nut** 4 100MC4318
8 Washer** 4 100MC4321
9 Bolt** 4 100MC4322
11 Wiper*** 2 Included in seal kit
12 Bearing ring*** 2 Included in seal kit
13 Piston seal*** 1 Included in seal kit
14 Rod 1 100MC4355
17 Wiper ring*** 2 Included in seal kit
19 Rod seal*** 2 Included in seal kit
20 O‑ring*** 2 Included in seal kit
23 Spacer 2 100MC4346
*** Seal kit (incl 11 (2x), 12 (2x), 13 (1x), 17 (2x), 19 (2x) & 1 100MC4347
20 (2x))
621
MASTS & BOOMS
SPARE PARTS
SpAre pArtS For
FOR SideSHiFter
SIDESHIFTER cAScAde
CASCADE
SLIDING PIECES VERSION,
Sliding pieceS VerSion, FEM 3,
FeM 3, CAPACITY: 5000 KG
cApAcity: 5000 Kg
Type: 100ESS
1 2
7
4 5
10 8 9
15 11
12 13 14
16
23 21 20 19 18 17
22
11 15 16 17 18 19 20
622
MASTS & BOOMS

Type: 100ESS

Sideshifter
5 Nut*** 6 100MC4318
6 Lower hook*** 2 Width of sideshifter: ≤ 1490 mm 100MC4319
6 Lower hook*** 3 Width of sideshifter: ≥ 1500 mm 100MC4319
7 Lower bearing* 2 Width of sideshifter: ≤ 1490 mm 100MC4356
7 Lower bearing** 3 Width of sideshifter: ≥ 1500 mm 100MC4356
8 Washer*** 6 100MC4321
9 Bolt*** 6 100MC4322
10 Support 2 Width of sideshifter: ≤ 1490 mm 100MC4359
10 Support 3 Width of sideshifter: ≥ 1500 mm 100MC4359
* Bearing kit for sideshifter (incl 1 (2x) & 7 (2x)) 1 Width of sideshifter: ≤ 1490 mm 100MC4358
** Bearing kit for sideshifter (incl 1 (2x) & 7 (3x)) 1 Width of sideshifter: ≥ 1500 mm 100MC4360
*** Hook kit for sideshifter (incl 5 (2x), 6 (2x), 8 (2x) & 9 (2x)), 2 Width of sideshifter: ≤ 1490 mm 100MC4361
set for 1 hook
*** Hook kit for sideshifter (incl 5 (2x), 6 (2x), 8 (2x) & 9 (2x)), 3 Width of sideshifter: ≥ 1500 mm 100MC4361
set for 1 hook
11 Wiper**** 2 Included in seal kit
12 Bearing ring**** 2 Included in seal kit
13 Piston seal**** 1 Included in seal kit
14 Rod assembly 1 100MC4369
17 Rod wiper**** 2 Included in seal kit
19 Back‑up ring**** 2 Included in seal kit
20 Rod seal**** 2 Included in seal kit
23 Washer 2 100MC4346
**** Seal kit (incl 11 (2x), 12 (2x), 17 (2x), 19 (2x) & 20 (2x)) 1 100MC4375
623
MASTS & BOOMS
10
7
2 12 13 14
9
3 4
8 15
11
5 6 1
Type: 55F‑SSS‑…

Sideshifter
1 Upper bearing nylon 2 100MC9311
1 Upper bearing nylon 2 From date of construction October 1999 100MC9312
and onwards
2 Lower bearing nylon 2 100MC9313
2 Lower bearing nylon 2 From date of construction March 2000 100MC9314
and onwards
3 Nut* 4 100MC4318
5 Washer* 4 100MC4321
6 Capscrew* 4 100MC4557
8 Restrictor washer 2 100MC9315
10 Safety decal 1 Not available
11 Fitting 2 100MC9254
* Hook kit (complete for 1 hook, incl 3 (2x), 4 (1x), 5 (2x), 2 Set for 1 hook 100MC9316
6 (2x))
12 Rod seal* 2 100MC4339
13 O‑ring* 2 100MC4566
* Seal kit (incl 12 (2x), 13 (2x) & 14 (2x)) 1 100MC4568
624
MASTS & BOOMS

1 2 1
6 15 14 13 12
7 12 13 14 15
3
4 5
11
10 8 9
Type: 65FSS

Sideshifter
2 Cylinder 1 On request, give serial n°
5 Nut** 4 100MC4318
8 Washer** 4 100MC4570
9 Bolt** 4 100MC4557
10 Bolt 2 100MC4558
11 Washer 1 100MC4574
** Hook kit for sideshifter (incl 5 (4x), 6 (2x), 8 (4x) 1 Set for 2 hooks 100MC4571
& 9 (4x))
12 Rod wiper seal* 2 Included in seal kit
625
MASTS & BOOMS

1 2 1
6 15 14 13 12
7 12 13 14 15
3
4 5
11
10 8 9
Type: 100FSS

Sideshifter
5 Nut** 4 100MC4318
8 Washer** 4 100MC4570
9 Bolt** 4 100MC4322
10 Bolt 1 100MC4558
11 Washer 1 100MC4574
** Hook kit for sideshifter (incl 5 (4x), 6 (2x), 8 (4x) & 9 (4x)) 1 Set for 2 hooks 100MC4571
12 Rod wiper seal* 2 Included in seal kit
626
MASTS & BOOMS

SPARE PARTS FOR SIDESHIFTER KAUP
8 4 7
2
16
9
1
8 6
12 11
3 5
4
5 15
7 9
6 9
3 16
13
14
12 11
10
13
9 14
Type: 1 T/2 T 151 P4, P4 N, P4 ND

2 Guide complete 1 For 1 T/2 T 151 P4 and P4 N 100MC4376
2 Guide complete 1 For 1 T/2 T 151 P4 ND 100MC4377
3 Bush 2 For 1 T/2 T 151 P4 and P4 N 100MC4378
3 Bush 2 For 1 T/2 T 151 P4 ND 100MC4379
4 Groove ring* 2 For 1 T/2 T 151 P4 and P4 N 100MC4380
4 Groove ring** 2 For 1 T/2 T 151 P4 ND 100MC4381
5 Washer 2 For 1 T/2 T 151 P4 and P4 N 100MC4382
5 Washer 2 For 1 T/2 T 151 P4 ND 100MC4383
6 Wiper ring* 2 For 1 T/2 T 151 P4 and P4 N 100MC4384
6 Wiper ring** 2 For 1 T/2 T 151 P4 ND 100MC4385
7 Piston rod 2 For 1 T/2 T 151 P4 and P4 N 100MC4386
7 Piston rod 2 For 1 T/2 T 151 P4 ND 100MC4387
8 Upper bearing*** 2 100MC4388
9 Grease nipples*** 4 100MC4389
10 Screw 1 100MC4390
11 Hook 2 From year of construction 1999 and 100MC4391
onwards
Material: cast iron
11 Hook 2 Up to year of construction 1999 100MC4392
Material: stamped plate
12 Lower bearing*** 2 100MC4393
13 Screw plug 2 100MC4394
14 Nut 2 100MC4395
15 Fitting 2 On request, give serial n°
16 Screw 2 On request, give serial n°
* Seal kit complete (incl 4 (2x), 6 (2x)) 1 For 1 T/2 T 151 P4 and P4 N 100MC4396
** Seal kit (incl 4 (2x), 6 (2x)) 1 For 1 T/2 T 151 P4 ND 100MC4397
*** Bearing kit (incl 8 (2x), 9 (4x), 12 (2x)) 1 100MC4398
627
MASTS & BOOMS
SpAre PARTS
SPARE pArtS FOR
For SIDESHIFTER
SideSHiFter KAUP
KAup
Type: 1 T/2 T 151 P3
26
18
15
4 5 6 7 8 9 10 11
14
20 25
13 12
22 25 27
29 3
23 21 24 4 11 10 9 8
29
2 27
7 6 5
19
27
19
1
17
19 16 28
628
MASTS & BOOMS

Type: 1 T/2 T 151 P3

2 Housing complete, right‑hand side 1 Stroke: 80 mm, incl 4–11; for 1 T 151 P3 100MC4399
2 Housing complete, right‑hand side 1 Stroke: 100 mm, incl 3, 5–11; for 100MC4400
2 T 151 P3
3 Housing complete, left‑hand side 1 Stroke: 80 mm, incl 4–11; for 1 T 151 P3 100MC4401
3 Housing complete, left‑hand side 1 Stroke: 100 mm, incl 3, 5–11; for 100MC4402
2 T 151 P3
4, 5, 6, 7 Piston rod 2 Stroke: 80 mm; for 1 T 151 P3 100MC4286
5 Pressure spring 2 100MC4288
6 Ball 2 100MC4403
9 Circlips 2 100MC4292
10 Washer 2 100MC4293
11 Groove ring* 2 100MC4380
12 Protection plate 1 100MC4406
13 Screw set 1 100MC4296
15 Plate 1 Length: 800 mm 100MC4297
15 Plate 1 Length: 1020 mm 100MC4298
16 Hook 2 100MC4407
18 Intermediate element 4 100MC4311
20 Elbow 2 100MC4305
21 Pipe 2 On request, give serial n°
22 Hose line 1 On request, give serial n°
24 Quick coupling 2 On request, give serial n°
25 Seal ring 2 100MC4306
26 O‑ring 1 100MC4307
29 Spacer 2 100MC4310
* Seal kit (incl 8 (2x), 11 (2x)) 1 100MC4312
629
MASTS & BOOMS
SpAre
SPARE pArtS
PARTS For
FOR SideSHiFter
SIDESHIFTER KAup
KAUP
Type: 1 T/2 T/3 T 151 P2
26
30
15
4 5 6 7 8 9 10 11
13
20 25
14 12
22 25 27
29 3
23 21 24 4 11 10 9 8
28
29
2 27
7 6 5
19
27
17 16 18
19
630
MASTS & BOOMS

Type: 1 T/2 T/3 T 151 P2

2 T/3 T 151 P2
2 T/3 T 151 P2
4, 5, 6, 7 Piston rod 2 Stroke: 100 mm; for 2 T/3 T 151 P2 100MC4287
6 Ball 2 100MC4289
9 Circlips 2 100MC4292
10 Washer 2 100MC4293
15 Plate 1 Length: 800 mm; for 1 T/2 T 151 P2 100MC4297
15 Plate 1 Length: 1020 mm; for 1 T/2 T 151 P2 100MC4298
15 Plate 1 Length: 1020 mm; for 3 T 151 P2 100MC4299
16 Hook** 2 For 1 T/2 T 151 P2 100MC4300
16 Hook** 2 For 3 T 151 P2 100MC4301
17 Supporting roller**/*** 2 100MC4302
18 Fixing pin** 2 100MC4303
19 Screw 10 100MC4304
20 Elbow 2 100MC4305
22 Hose 1 On request, give serial n°
23 Hose 1 On request, give serial n°
25 Seal ring 2 100MC4306
26 O‑ring 1 100MC4307
27 Sliding piece*** 6 100MC4308
28 Grease nipples 6 100MC4309
29 Spacer 2 100MC4310
30 Intermediate element 4 100MC4311
* Seal kit (incl 8 (2x), 11 (2x)) 1 100MC4312
** Hook kit (complete for 1 hook, incl 16 (1x), 17 (1x), 2 For 1 T/2 T 151 P2, set for 1 hook 100MC4313
18 (1x))
** Hook kit (complete for 1 hook, incl 16 (1x), 17 (1x), 2 For 3 T 151 P2, set for 1 hook 100MC4314
18 (1x))
*** Roller and bearing kit (incl 17 (2x), 27 (6x)) 1 100MC4315
631
MASTS & BOOMS
SpAre PARTS
SPARE pArtS FOR
For SIDESHIFTER
SideSHiFter KAUP
KAup
Type: 4 T 151 P2
26
15
4 5 6 7 8 8 10 11
13
20
14 12
22 27
23 21 24 4 11 10 9 8
28
2 27
7 6 5
19
27
1 30
17
18
19 19 17 29 16 18
632
MASTS & BOOMS

Type: 4 T 151 P2

2 Housing complete, right‑hand side 1 Stroke: 100 mm, incl 4–11 100MC9351
Housing complete, right‑hand side 1 Stroke: 125 mm, incl 3, 5–11 100MC9352
3 Housing complete, left‑hand side 1 Stroke: 100 mm, incl 4–11 100MC9353
Housing complete, left‑hand side 1 Stroke: 125 mm, incl 3, 5–11 100MC9354
4 Piston rod 2 Stroke: 100 mm, incl 4–7 100MC4421
Piston rod 2 Stroke: 125 mm, incl 4–7 100MC4422
6 Ball 2 100MC4289
9 Circlip 2 100MC4429
10 Washer 2 100MC4431
15 Plate length: 1100 mm 1 100MC9355
16 Hook** 2 100MC9356
17 Supporting roller**/*** 4 100MC9357
18 Fixing pin** 6 100MC4303
19 Screw 10 100MC4304
20 Elbow 2 100MC4305
26 O‑ring 1 100MC4307
27 Sliding piece*** 6 100MC4445
29 Holder** 2 100MC4446
30 Bolt** 2 100MC4447
* Seal kit (incl 8 (2x) & 11 (2x)) 1 100MC4448
** Hook kit (complete for 1 hook, incl 16 (1x), 17 (2x), 2 Set for 1 hook 100MC9358
18 (3x), 29 (1x) & 30 (1x))
*** Roller and bearing kit (incl 17 (4x) & 27 (6x)) 1 100MC4452
633
MASTS & BOOMS
SpAre
SPARE pArtS
PARTS For
FOR SideSHiFter
SIDESHIFTER KAup
KAUP
Type: 5 T/6 T 151 P2
26
15
4 5 6 7 8 9 10 11
13
20
14 12
22 27
23 21 24 4 11 10 9 8
28
2 27
7 6 5
31
27
1 30
17
18
19 31 17 29 16 18
634
MASTS & BOOMS

Type: 5 T/6 T 151 P2

5 T 151 P2
3 Housing complete, left‑hand side 1 Stroke: 100 mm, incl 4–11 for 5 T 151 P2 100MC4416
5 T 151 P2
4 Piston rod 2 Stroke: 100 mm, incl 4–7; for 5 T 151 P2 100MC4421
6 Ball 2 100MC4289
8 Wiper ring* 2 For 5 T 151 P2 100MC4427
8 Wiper ring** 2 For 6 T 151 P2 100MC4428
9 Circlip 2 For 5 T 151 P2 100MC4429
9 Circlip 2 For 6 T 151 P2 100MC4430
10 Washer 2 For 5 T 151 P2 100MC4431
10 Washer 2 For 6 T 151 P2 100MC4432
11 Groove ring* 2 For 5 T 151 P2 100MC4433
11 Groove ring** 2 For 6 T 151 P2 100MC4434
12 Protection plate 1 For 5 T 151 P2 100MC4435
12 Protection plate 1 For 6 T 151 P2 100MC4436
13 Screw 1 For 5 T 151 P2 100MC4296
13 Screw 1 For 6 T 151 P2 100MC4437
14 Screw 1 For 5 T 151 P2 100MC4296
14 Screw 1 For 6 T 151 P2 100MC9359
16 Hook*** 2 100MC4441
17 Supporting roller***/****/***** 4 100MC4302
18 Fixing pin*** 6 100MC4303
19 Screw 4 100MC4442
20 Elbow 2 For 5 T 151 P2 100MC4443
20 Elbow 2 For 6 T 151 P2 100MC4305
26 O‑ring 1 100MC4307
27 Sliding piece**** 6 For 6 T 151 P2 100MC4444
27 Sliding piece***** 6 For 5 T 151 P2 100MC4445
28 Greasing nipple 6 100MC4309
29 Holder*** 2 100MC4446
30 Bolt*** 2 100MC4447
31 Bolt 8 For 5 T 151 P2 100MC4453
31 Bolt 10 For 6 T 151 P2 100MC4453
* Seal kit (incl 8 (2x), 11 (2x)) 1 For 5 T 151 P2 100MC4448
** Seal kit (incl 8 (2x), 11 (2x)) 1 For 6 T 151 P2 100MC4449
*** Hook kit (complete for 1 hook, incl 16 (1x), 17 (2x), 1 Set for 1 hook 100MC4450
18 (3x), 29 (1x), 30 (1x))
**** Roller and bearing kit (incl 17 (4x), 27 (6x)) For 6 T 151 P2 100MC4451
***** Roller and bearing kit (incl 17 (4x), 27 (6x)) For 5 T 151 P2 100MC4452
635
MASTS & BOOMS
SPARE PARTS FOR SIDESHIFTER RONCARI DSL2

1
12
6 8 6
3
4 5 7
14 15 16 17 13 18 19 13 17 16 15 14
9 10 11
Type: DSL2–DSL3

DSL2 DSL3
Sideshifter
2 Lower pad* 2 100MC9360 100MC9360
3 Bolt** 4 100MC9361 100MC9444
4 Washer** 5 100MC9362 100MC9362
5 Bracket** 2 100MC9363 100MC9445
6 Washer** 4 100MC9059 100MC9059
7 Nut** 4 100MC9364 100MC9446
8 Bolt 5 100MC9365 100MC9365
9 Upper bearing* 4 100MC9366 100MC9447
10 Slide rail 1 On request, give serial n°
* Bearing kit (incl 2 (2x), 9 (4x)) 1 100MC9367 100MC9448
** Hook kit (incl 3 (2x), 4 (2x), 5 (1x), 6 (2x) & 2 Set for 1 hook 100MC9368 100MC9449
7 (2x))
Cylinder assembly 1 Stroke: 200 mm 100MC9369 100MC9450
Cylinder assembly 1 Stroke: 300 mm 100MC9370 100MC9451
12 Cylinder rod with seal 1 Stroke: 200 mm 100MC9371 100MC9452
Cylinder rod with seal 1 Stroke: 300 mm 100MC9372 100MC9453
13 Circlips 2 100MC9373 100MC9429
14 Wiper* 2 Included in seal kit Included in seal kit
15 Seal* 2 Included in seal kit Included in seal kit
16 Flange 2 100MC9375 100MC9375
17 O‑ring* 2 Included in seal kit Included in seal kit
18 Composite seal* 1 Included in seal kit Included in seal kit
19 Cylinder tube 1 On request, give serial n°
* Seal kit (incl 14 (2x), 15 (2x), 17 (2x) & 1 100MC9378 100MC9434
18 (1x))
636
MASTS & BOOMS

4
A
1 2
L
5
6 12
13
3
7 19 18
14
9 10 11 8 15 16 17
Type: DSL2‑01.0001–DSL2‑01.0015

Sideshifter
1 Hook****** 2 100MC9379
2 Lower bearing*/**/*** 2 Width of sideshifter: 780–1340 mm 100MC4524
2 Lower bearing****/***** 3 Width of sideshifter: 1345–1620 mm 100MC4524
3 Screw 2 100MC9380
4 Upper bearing** 4 Width of sideshifter: 820–1060 mm 100MC9381
4 Upper bearing***/**** 5 Width of sideshifter: 1060–1520 mm 100MC9381
4 Upper bearing***** 6 Width of sideshifter: 1520–1620 mm 100MC9381
5 Complete cylinder assembly 1 Width of sideshifter: 800 mm; A: 620 mm 100MC9382
5 1 Width of sideshifter: 880–990 mm; A: 680 mm 100MC9383
6 Plastic mount 2 100MC4535
8 Screw****** 2 100MC9389
9 Spring cotter pin****** 4 100MC9390
10 Screw TC 1 100MC9380
11 Washer 1 100MC9391
* Bearing kit (incl 2 (2x) & 4 (3x)) Width of sideshifter: 780–820 mm 100MC9392
** Bearing kit (incl 2 (2x) & 4 (4x)) Width of sideshifter: 820–1060 mm 100MC9393
*** Bearing kit (incl 2 (2x) & 4 (5x)) Width of sideshifter: 1060–1340 mm 100MC9394
**** Bearing kit (incl 2 (3x) & 4 (5x)) Width of sideshifter: 1345–1520 mm 100MC9395
***** Bearing kit (incl 2 (3x) & 4 (6x)) Width of sideshifter: 1520–1620 mm 100MC9396
****** Hook kit (complete for 1 hook, incl Set for 1 hook 100MC9397
1 (1x), 8 (1x) & 9(2x))
12 Cylinder liner 1 On request, give serial n°
13 Seal E/GR* 1 Included in seal kit
14 Rod + piston 1 100MC9398
15 Elastic ring 4 100MC9399
16 Ring nut 2 100MC9400
17 Seal EU* 2 Included in seal kit
18 Seal WRM* 2 100MC9066
* Seal kit (incl 13 (1x), 17 (2x), 100MC9403
18 (2x) & 19 (2x))
637
MASTS & BOOMS
SpAre
SPARE pArtS
PARTS For
FOR SideSHiFter
SIDESHIFTER roncAri
RONCARI dSl3
DSL3
FeM 3,
FEM 3, cApAcity:
CAPACITY: 5000 Kg,
5000 KG, 500 MM
Type: DSL3 1000R20‑04–DSL3 2000R20‑04, DSL3 5004.0001–DSL3 5004.0013
6 8
7
4 1 A
14 13 12
10
11
15
16
22 21
17
18 19 20
638
MASTS & BOOMS

FEM 3, CAPACITY: 5000 KG, 500 MM
Type: DSL3 1000R20‑04–DSL3 2000R20‑04, DSL3 5004.0001–DSL3 5004.0013

Sideshifter
1 Upper bearing**/*** 5 Width of sideshifter: 1095–1450 mm 100MC4526
1 Upper bearing****/***** 7 Width of sideshifter: 1450–1800 mm 100MC4526
1 Upper bearing****** 9 Width of sideshifter: 1800–2020 mm 100MC4526
2 Lower bearing*/** 2 Width of sideshifter: 1000–1320 mm 100MC9404
2 Lower bearing***/**** 3 Width of sideshifter: 1350–1700 mm 100MC9404
2 Lower bearing*****/****** 4 Width of sideshifter: 1720–2020 mm 100MC9404
3 Cylinder assembly 1 Width of sideshifter: 1000–1090 mm; A: 780 mm 100MC9405
6 Washer grower 2 100MC9414
7 Screw TE 2 100MC9415
8 Grease nipple Quantity on request 100MC4278
9 Screw TE******* 4 100MC9416
10 Washer grower******* 4 100MC9417
11 Lower Hook******* 2 100MC9418
12 Self‑locking nut******* 4 100MC9419
13 Screw TC 1 100MC4538
14 Washer grower 1 100MC4539
****** Bearing kit (incl 1 (9x) & 2 (4x)) Width of sideshifter: 1760–2020 mm 100MC9425
******* Hook kit (complete for 1 hook, incl Set for 1 hook 100MC9426
9 (2x), 10 (2x), 11 (1x) & 12 (2x))
19 Ring nut 2 100MC9430
21 Seal WRM* 2 Included in seal kit
21 (2x) & 22 (2x))
639
MASTS & BOOMS
SPARE
SpAre PARTS FOR SideSHiFter
pArtS For SIDESHIFTER roncAri
RONCARI dSl3
DSL3
FEM 3
FeM 3
Type: DSL3 1000A20–DSL3 2000A20, DSL3‑01.0001–DSL3‑01.0013, DSL3‑01R0001–DSL3‑01R0004
4
A
1 2
L
5
9 10 11 8
12
13
19 18
14
15 16 17
640
MASTS & BOOMS

FEM 3
Type: DSL3 1000A20–DSL3 2000A20, DSL3‑01.0001–DSL3‑01.0013, DSL3‑01R0001–DSL3‑01R0004

Sideshifter
1 Hook****** 2 Width of sideshifter: 1000–1090 mm 100MC4523
2 Lower bearing*/**/***/****/***** 3 100MC4524
3 Screw 2 100MC4525
4 Upper bearing*** 6 Width of sideshifter: 1600–1650 mm 100MC4526
4 Upper bearing**** 7 Width of sideshifter: 1655–1760 mm 100MC4526
5 Complete cylinder assembly 1 Width of sideshifter: 1000 mm; A: 780 mm 100MC4527
6 Plastic mount 2 100MC4535
8 Screw****** 2 100MC4536
10 Screw TC 1 100MC4538
11 Washer 1 100MC4539
1 (1x), 8 (1x) & 9 (2x))
16 Ring nut 2 100MC4549
18 (2x) & 19 (2x))
641
MASTS & BOOMS

FEM 3, CAPACITY: 5000 KG, 500 MM
3
A
1 2
L
4
8
9
5 15 14
10
7 6 11 12 13
Type: DSL3 1250R20–DSL3 2000R20, DSL3‑01R0005–DSL3‑01R0013

Sideshifter
1 Hook****** 2 100MC4523
2 Lower bearing*/**/***/****/***** 2 Width of sideshifter: 780–1340 mm 100MC4524
3 Upper bearing*** 4 Width of sideshifter: 1650–1740 mm 100MC4526
3 Upper bearing**** 5 Width of sideshifter: 1745–2100 mm 100MC4526
4 Complete cylinder assembly 1 Width of sideshifter: 1000–1260 mm; A: 880 mm 100MC9435
6 Screw****** 2 100MC4536
* Bearing kit (incl 2 (2x)) Width of sideshifter: 1210–1260 mm 100MC9439
1 (1x), 6 (1x) & 7 (2x))
12 Ring nut 2 100MC9430
* Seal kit (incl 9 (1x), 11 (4x), 13 (2x), 100MC9434
14 (2x) & 15 (2x))
642
MASTS & BOOMS

SLIDING PIECES VERSION, FEM 4, CAPACITY: 8000 KG, 600 MM
1
2
5 3
6
8 9
12
10 11
7 reF 100Mc4280
Type: DSL4‑0010–DSL4‑0066

1 Upper bearing 4 On request, give serial n° 100MC4268
2 Slide rail 1
3 Cylinder assembly 1 Stroke: 200 mm 100MC4269
4 Bolt* 4 100MC4271
5 Bolt 4 100MC4272
7 Bracket* 4 100MC4274
9 Guide pin** Quantity depends on width of sideshifter 100MC4275
10 Roller** Quantity depends on width of sideshifter 100MC4276
11 Retaining ring** Quantity depends on width of sideshifter 100MC4277
12 Grease nipple** Quantity depends on width of sideshifter 100MC4278
* Hook kit (incl 4 (2x) & 7 (2x)) 2 100MC4279
** Roller complete kit (incl 9 (1x), 10 (1x), Quantity depends on width of sideshifter 100MC4281
11 (1x) & 12 (1x))
Seal kit of cylinder assembly 1 100MC4280
643
MASTS & BOOMS
SpAre
SPARE pArtS
SpAre PARTS For
pArtS FOR SideSHiFter
For SIDESHIFTER totAlSource
SideSHiFter TOTALSOURCE®® clASS
totAlSource CLASS ii
clASS II
ii
Type:
Type: SS200800‑A2711867,
SS200800‑A2711867, SS200900‑A2711868,
SS200900‑A2711868, SS200920‑B2711626,
SS200920‑B2711626, SS200940‑D2711868,
SS200940‑D2711868,
SS200980‑A2711869,
SS200980‑A2711869, SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201070‑A3004564, SS201100‑C2711870,
SS201070‑A3004564, SS201100‑C2711870, SS201150‑E2711870,
SS201150‑E2711870, SS201250‑E2711871,
SS201250‑E2711871,
SS201400‑D2711872
SS201400‑D2711872
8
8 9
9
5
5
7
7
6
6
4
4
2
2
1
1
3
3
old
Old type
old type of
of cylinder
cylinder
27
27
L
L
10
10
reF 100Mc4646
REF 100MC4646
reF 100Mc4646
11
11 12
12 20
20 21
21 22
22 25
25 26
26
13
13 14
14 15
15 16
16 17
17 18
18 19
19
new
New type
new type of
of cylinder
cylinder
27
27
L
L
28
28
29
29 reF 100Mc8231
REF 100MC8231
reF 100Mc8231
31
31
21 23
21 24 25
23 24 25 26 32
26 32
30
30 15 16
15 16 17
17 18
18
33
33 20
20
644
MASTS & BOOMS

SPARE PARTS FOR SIDESHIFTER TOTALSOURCE® CLASS II
Type: SS200800‑A2711867, SS200900‑A2711868, SS200920‑B2711626, SS200940‑D2711868,
SS200980‑A2711869, SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201070‑A3004564, SS201100‑C2711870, SS201150‑E2711870, SS201250‑E2711871,
SS201400‑D2711872

Sideshifter
1 Bolt assembly 4 100MC4616
3 Lower slide plate** 2 100MC9099
4 Bracket 2
5 Frame 1 On request, give serial n° and type
8 Nipple 4 100MC4618
9 Hook 1
10 Cylinder support 1 For sideshifter width: 800 mm, support width: 600 mm 100MC4619
11 Bolt + washer 4 100MC4625
12 Screw*** 2 100MC4626
13 Cylinder body*** 1 100MC4627
14 Steel ball*** 72 100MC4628
15 Seal ring*/***/****/***** 1 Consists of 2 pieces Included in seal kit
16 Piston***/**** 1 100MC4629
17 Back‑up ring*/***/****/***** 2 Included in seal kit
18 O‑ring*/***/****/***** 2 Included in seal kit
20 Guide bush*** + bush***/**** 2 100MC4631
21 YQ seal*/***/****/***** 2
22 Piston rod*** 2 100MC4632
23 Plastic washer***/****/***** 2 100MC4633
24 Metal washer***/****/***** 2 100MC4634
25 Locking ring*/***/****/***** 2 Included in seal kit
26 Dust seal ring*/***/****/***** 2 Included in seal kit
27 Upper slide plate** 4 100MC9171
645
MASTS & BOOMS
SpAre
SPARE pArtS
pArtS For
SpAre PARTS FOR SideSHiFter
For SIDESHIFTER totAlSource
SideSHiFter clASS
TOTALSOURCE®® CLASS
totAlSource ii
clASS II
ii
Type:
Type: SS200800‑A2711867,
SS200800‑A2711867, SS200900‑A2711868,
SS200900‑A2711868, SS200920‑B2711626,
SS200920‑B2711626, SS200940‑D2711868,
SS200940‑D2711868,
SS200980‑A2711869,
SS200980‑A2711869, SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201070‑A3004564,
SS201070‑A3004564, SS201100‑C2711870,
SS201100‑C2711870, SS201150‑E2711870,
SS201150‑E2711870, SS201250‑E2711871,
SS201250‑E2711871,
SS201400‑D2711872
SS201400‑D2711872
8
8 9
9
5
5
7
7
6
6
4
4
2
2
1
1
3
3
old
Old
old type
type of
of cylinder
cylinder
27
27
L
L
10
10
reF 100Mc4646
REF 100MC4646
reF 100Mc4646
11
11 12
12 20
20 21
21 22
22 25
25 26
26
13
13 14
14 15
15 16
16 17
17 18
18 19
19
new
New
new type
type of
of cylinder
cylinder
27
27
L
L
28
28
29
29 reF 100Mc8231
REF 100MC8231
reF 100Mc8231
31
31
21 23
21 24 25
23 24 25 26 32
26 32
30
30 15 16
15 16 17
17 18
18
33
33 20
20
646
MASTS & BOOMS

Type: SS200800‑A2711867, SS200900‑A2711868, SS200920‑B2711626, SS200940‑D2711868,

SS200980‑A2711869, SS201000‑C2711869, SS201020‑C2711626, SS201040‑E2711869,
SS201070‑A3004564, SS201100‑C2711870, SS201150‑E2711870, SS201250‑E2711871,
SS201400‑D2711872
31 Guide bush**** + bush***/**** 2 100MC4643
32 Piston rod**** 2 100MC4644
33 Steel wire****/***** 2 100MC4645
* Seal kit (incl 15 (1x), 17 (2x), 18 (2x), 1 100MC4646
21 (2x), 25 (2x), 26 (2x)) old type
cylinder
** Bearing kit for sideshifter (incl 1 100MC4647
3 (2x), 6 (2x), 27 (4x))
*** Old type of cylinder compl (incl 1 100MC4648
12–18, 20–26)
**** New type of cylinder compl (incl 1 100MC4649
15–18, 21, 23–26, 31–33)
***** Seal kit incl 15 (1x), 17 (2x), 18 (2x), 1 100MC8231
21 (2x), 23 (2x), 24 (2x), 25 (2x),
26 (2x), 33 (2x) new type of cylinder
647
MASTS & BOOMS
SpAre PARTS
SPARE pArtS For
FOR SideSHiFter
SIDESHIFTER totAlSource clASS II
TOTALSOURCE® CLASS ii
Type: SS200800T‑A3306857, SS200900T‑C3306901, SS200920T‑A3306903, SS200940T‑E3306910,
SS200980T‑E3306911, SS201000T‑C3306913, SS201020T‑C3306914, SS201040T‑D3306915,
SS201070T‑B3306916, SS201100T‑B3306918, SS201150T‑B3306919, SS201250T‑E3306920,
SS201400T‑A3306922
4
6
9
L
10
11
18 19 20 21 22 23 24
12 13 14 15 16 17
25
reF 100Mc8231
REF 100MC8231
648
MASTS & BOOMS

Type: SS200800T‑A3306857, SS200900T‑C3306901, SS200920T‑A3306903, SS200940T‑E3306910,
SS200980T‑E3306911, SS201000T‑C3306913, SS201020T‑C3306914, SS201040T‑D3306915,
SS201070T‑B3306916, SS201100T‑B3306918, SS201150T‑B3306919, SS201250T‑E3306920,
SS201400T‑A3306922

Sideshifter
3 Bracket 2
8 Hook 1
13 Seal ring*/*** 1 Consists of 2 pieces Included in seal kit
14 Piston*** 1 100MC4629
15 Back‑up ring*/*** 2 Included in seal kit
16 O‑ring*/*** 2 Included in seal kit
18 Guide bush***+Bush*** 2 100MC4643
19 YQ seal*/*** 2 Included in seal kit
20 Plastic washer*** 2 100MC4633
21 Metal washer*** 2 100MC4634
22 Locking ring*/*** 2 Included in seal kit
23 Dust seal ring*/*** 2 Included in seal kit
24 Piston rod*** 2 100MC4644
25 Steel wire*** 2 100MC4645
19 (2x), 22 (2x), 23 (2x))
5 (2x), 9 (4x))
*** Cylinder complete (incl 12–16, 1 100MC4649
18–25)
649
MASTS & BOOMS
SpAre PARTS
SPARE pArtS For
FOR SideSHiFter
SIDESHIFTER totAlSource clASS III
TOTALSOURCE® CLASS iii
Type: SS301000‑B2711873, SS301070‑A3004562, SS301100‑D3002699, SS301150‑A2711874,
SS301200‑C2711874, SS301250‑E3004559, SS301300‑A2711875, SS301350‑C2711875,
SS301400‑D3004560
8 9
2
1
3
old type of cylinder

Old
27
L
10
reF 100Mc4610
REF 100MC4610
11 12 20 21 22 25 26
13 14 15 16 17 18 19
new type of cylinder

New
27
L
28
29 reF 100Mc5061
REF 100MC5061
31
21 23 24 25 26 32
30 15 16 17 18
33 20
650
MASTS & BOOMS

SPARE PARTS FOR SIDESHIFTER TOTALSOURCE® CLASS III
SS301200‑C2711874, SS301250‑E3004559, SS301300‑A2711875, SS301350‑C2711875,
SS301400‑D3004560

Sideshifter
4 Bracket 2
9 Hook 1
11 Bolt + washer 4 100MC4590
12 Screw*** 2 100MC4591
13 Cylinder body*** 1 100MC4592
14 Steel ball*** 72 100MC4593
15 Seal ring*/***/****/***** 1 Included in seal kit
16 Piston***/**** 1 100MC4594
17 Back‑up ring*/***/****/***** 2 Included in seal kit
18 O‑ring*/***/****/***** 2 Included in seal kit
20 Guide bush***+bush***/**** 2 100MC4596
21 YQ seal*/***/****/***** 2 Included in seal kit
22 Piston rod*** 2 100MC4597
23 Plastic washer***/****/***** 2 100MC4598
24 Metal washer***/****/***** 2 100MC4599
25 Locking ring*/***/****/***** 2 Included in seal kit
26 Dust seal ring*/***/****/***** 2
31 Guide bush**** + bush***/**** 2 100MC4607
32 Piston rod**** 2 100MC4608
33 Steel wire****/***** 2 100MC4609
21 (2x), 25 (2x), 26 (2x)) old type
cylinder
651
MASTS & BOOMS
SpAre PARTS
SPARE pArtS FOR
For SIDESHIFTER
SideSHiFter TOTALSOURCE
totAlSource® CLASS
clASS III
iii
SS301200‑C2711874, SS301250‑E3004559, SS301300‑A2711875, SS301350‑C2711875,
SS301400‑D3004560
8 9
2
1
3
old type of cylinder

Old
27
L
10
reF 100Mc4610
REF 100MC4610
11 12 20 21 22 25 26
13 14 15 16 17 18 19
new type of cylinder

New
27
L
28
29 reF 100Mc5061
REF 100MC5061
31
21 23 24 25 26 32
30 15 16 17 18
33 20
652
MASTS & BOOMS

SS301200‑C2711874, SS301250‑E3004559, SS301300‑A2711875, SS301350‑C2711875,
SS301400‑D3004560
3 (2x), 6 (2x), 27 (4x))
*** Old type of cylinder compl (incl 1 100MC4612
12–18, 20–26)
**** New type of cylinder compl (incl 1 100MC4613
15–18, 21, 23–26, 31–33)
***** Seal kit (incl 15 (1x), 17 (2x), 18 (2x), 1 100MC5061
21 (2x), 23 (2x), 24 (2x), 25 (2x),
26 (2x), 33 (2x) new type of cylinder
653
MASTS & BOOMS
SpAre PARTS
SPARE pArtS For
FOR SideSHiFter
SIDESHIFTER totAlSource clASS III
TOTALSOURCE® CLASS iii
Type: SS301000T‑C3306923, SS301070T‑A3306928, SS301100T‑D3306929, SS301150T‑D3306930,
SS301200T‑E3306931, SS301250T‑D3306932, SS301300T‑A3306942, SS301350T‑D3306934,
SS301400T‑A3306936
4
6
9
L
10
11
18 19 20 21 22 23 24
12 13 14 15 16 17
25
reF 100Mc4610
REF 100MC4610
654
MASTS & BOOMS

Type: SS301000T‑C3306923, SS301070T‑A3306928, SS301100T‑D3306929, SS301150T‑D3306930,
SS301200T‑E3306931, SS301250T‑D3306932, SS301300T‑A3306942, SS301350T‑D3306934,
SS301400T‑A3306936

Sideshifter
3 Bracket 2
8 Hook 1
13 Seal ring*/*** 1 Consists of 2 pieces Included in seal kit
14 Piston*** 1 100MC4594
15 Back‑up ring*/*** 2 Included in seal kit
16 O‑ring*/*** 2 Included in seal kit
18 Guide bush***+bush*** 2 100MC4607
19 YQ seal*/*** 2 Included in seal kit
20 Plastic washer*** 2 100MC4598
21 Metal washer*** 2 100MC4599
22 Locking ring*/*** 2 Included in seal kit
23 Dust seal ring*/*** 2 Included in seal kit
24 Piston rod*** 2 100MC4608
25 Steel wire*** 2 100MC4609
Seal kit (incl 13 (1x), 15 (2x), 16 (2x), 1 100MC4610
19 (2x), 22 (2x), 23 (2x))
Bearing kit for sideshifter (incl 1 100MC4615
5 (2x), 9 (4x))
Cylinder complete (incl 12–16, 1 100MC4613
18–25)
655
Sideshifters
MASTS & BOOMS
CAM ATTACHMENTS®
Flexiblity and experience

About CAM attachments After‑sales service
Products by CAM attachments are recognised for their We have an extensive range of spare parts immediately
high‑quality standards and reliability. Thanks to our deliverable from stock. Furthermore, our skilled team
extensive accumulated experience, we can offer you a of engineers guarantees you a complete after‑sales
wide range of high‑quality attachments. service: we offer repair and maintenance of the
We have achieved great popularity in Western European attachments either on‑site or in our workshop, as well
countries such as Italy, France, the UK, Portugal, as telephonic technical support.
Germany, Spain and Belgium. We sell our products in
more than 80 countries all over the world. Key industries
Supported by its flexibility and experience, CAM
Product portfolio attachments supplies products that successfully
Our product range includes a comprehensive variety operate in all the main sectors of the market, such as
of attachments for different industries and types of the logistics industry, construction, food and beverage,
machines. Sideshifters, fork positioners, multi‑fork agricultural sector, paper handling, recycling, white
positioners, bale clamps, fork clamps, 180° or 360° goods, manufacturing and foundry applications.
rotating clamps, carton clamps and paper roll clamps
are just some of the products manufactured by our Attachments for all machines
Italian plant CAM Srl, but also skips, crane jibs, snow Our attachments are made for different types of
ploughs and forks are included in our range. Moreover, machines, such as forklifts, skid steer loaders,
CAM attachments offers customised solutions by telehandlers and tractor loaders.
studying the customer’s internal processes and
produces attachments specifically tuned to those needs.
www.camattachments.com
656
MASTS & BOOMS
Sideshifters
SIDESHIFTERS ISO/FEM 2 WITH SLIDING PADS
HCG
ISO 2328
VCG
W6 LL
W4

Technical details:
• 1 hydraulic function
• Maximum pressure: 220 bar
• Recommended oil flow: 10 l/min
• W6 – minimal width lift truck carriage
• Total sideshifter stroke 100 + 100 mm
Load backrest available on request
Model Capacity W4 W6 LL HCG VCG Weight ISO 2328 REF

kg/mm mm mm mm mm mm kg
SH225.080P.CD1 2500/500 800 800 63 32 234 46 2 100MC4984
SH225.090P.CD1 2500/500 900 800 63 32 231 49 2 100MC4985
SH225.092P.CD1 2500/500 920 800 63 32 229 50 2 100MC4986
SH225.094P.CD1 2500/500 940 800 63 32 229 51 2 100MC4987
SH225.098P.CD1 2500/500 980 800 63 32 226 52 2 100MC4988
SH225.100P.CD1 2500/500 1000 800 63 32 226 53 2 100MC4989
SH225.102P.CD1 2500/500 1020 800 63 32 224 54 2 100MC4990
SH225.104P.CD1 2500/500 1040 800 63 32 224 55 2 100MC4991
SH225.107P.CD1 2500/500 1070 800 63 32 221 56 2 100MC4992
SH225.110P.CD1 2500/500 1100 800 63 32 221 57 2 100MC4993
SH225.115P.CD1 2500/500 1150 800 63 32 218 64 2 100MC4994
SH225.125P.CD1 2500/500 1250 1000 63 32 218 66 2 100MC4995
SH225.140P.CD1 2500/500 1400 1000 63 32 216 72 2 100MC4996
657
Sideshifters
MASTS & BOOMS
SIDESHIFTERS ISO/FEM 3 WITH SLIDING PADS
HCG
ISO 2328
VCG
W6 LL
W4

Technical details:
Load backrest on request

SH335.100P.CD1 3500/500 1000 1000 68 34 300 65 3 100MC4997
SH335.107P.CD2 3500/500 1070 1000 68 34 297 68 3 100MC4998
SH335.110P.CD3 3500/500 1100 1000 68 34 297 70 3 100MC4999
SH335.115P.CD4 3500/500 1150 1000 68 34 295 72 3 100MC5000
SH335.120P.CD5 3500/500 1200 1000 68 34 295 75 3 100MC5001
SH335.125P.CD6 3500/500 1250 1000 68 34 292 77 3 100MC5002
SH335.130P.CD7 3500/500 1300 1000 68 34 292 79 3 100MC5003
SH335.135P.CD8 3500/500 1350 1100 68 34 292 88 3 100MC5004
SH335.140P.CD9 3500/500 1400 1100 68 34 289 90 3 100MC5005
658
MASTS & BOOMS
Sideshifters
SIDESHIFTERS ISO/FEM 1–2 WITH SLIDING PADS
HCG
ISO 2328
VCG
W6 LL
W4

Technical details:
Sideshifters for reach trucks on request

Custom‑made sideshifters available on request

TRF 112.080P 1000/500 800 700 70 32 238 43 1 100MC5006
TRF 112.085P 1000/500 850 700 70 32 236 45 1 100MC5007
TRF 112.100P 1000/500 1000 850 70 32 236 50 1 100MC5008
TRF 225.080P 2500/500 800 700 70 32 238 43 2 100MC5009
TRF 225.090P 2500/500 900 800 70 34 236 46 2 100MC5010
TRF 225.092P 2500/500 920 800 70 34 236 52 2 100MC5011
TRF 225.094P 2500/500 940 800 70 34 236 53 2 100MC5012
TRF 225.097P 2500/500 970 840 70 34 236 54 2 100MC5013
TRF 225.098P 2500/500 980 850 70 34 236 55 2 100MC5014
TRF 225.100P 2500/500 1000 850 70 34 236 56 2 100MC5015
TRF 225.102P 2500/500 1020 850 70 34 235 56 2 100MC5016
TRF 225.104P 2500/500 1040 850 70 34 235 57 2 100MC5017
TRF 225.107P 2500/500 1070 870 70 34 235 58 2 100MC5018
TRF 225.110P 2500/500 1100 900 70 34 235 59 2 100MC5019
TRF 225.115P 2500/500 1150 900 70 34 233 60 2 100MC5020
TRF 225.126P 2500/500 1260 1000 70 36 230 68 2 100MC5021
TRF 225.140P 2500/500 1400 1100 70 36 225 70 2 100MC5022
659
Sideshifters
MASTS & BOOMS
SIDESHIFTERS ISO/FEM 3–4 WITH SLIDING PADS
HCG
ISO 2328
VCG
W6 LL
W4

Technical details:
• Total sideshifter stroke 100 + 100 mm (FEM3)
• Total sideshifter stroke 150 + 150 mm (FEM4)
* Sideshifters FEM4 with idlers on request


TRF 335.100P 3500/500 1000 900 80 45 300 79 3 100MC5023
TRF 335.107P 3500/500 1070 950 80 45 302 84 3 100MC5024
TRF 335.110P 3500/500 1100 1000 80 45 302 85 3 100MC5025
TRF 335.115P 3500/500 1150 1000 80 45 303 88 3 100MC5026
TRF 335.120P 3500/500 1200 1000 80 45 305 92 3 100MC5027
TRF 335.125P 3500/500 1250 1100 80 45 305 93 3 100MC5028
TRF 335.130P 3500/500 1300 1100 80 45 308 98 3 100MC5029
TRF 335.135P 3500/500 1350 1100 80 45 308 103 3 100MC5030
TRF 350.100P 5000/500 1000 900 80 39 279 97 3 100MC5031
TRF 350.107P 5000/500 1070 950 80 39 279 102 3 100MC5032
TRF 350.110P 5000/500 1100 950 80 39 279 104 3 100MC5033
TRF 350.115P 5000/500 1150 950 80 39 278 107 3 100MC5034
TRF 350.120P 5000/500 1200 1000 80 39 278 110 3 100MC5035
TRF 350.126P 5000/500 1260 1000 80 39 278 115 3 100MC5036
TRF 350.130P 5000/500 1300 1000 80 39 277 118 3 100MC5037
TRF 350.135P 5000/500 1350 1050 80 39 277 120 3 100MC5038
TRF 350.156P 5000/500 1560 1250 80 39 276 151 3 100MC5039
TRF 350.166P 5000/500 1660 1350 80 40 276 156 3 100MC5040
TRF 350.175P 5000/500 1750 1450 80 40 275 160 3 100MC5041
TRF 350.185P 5000/500 1850 1500 80 40 275 198 3 100MC5042
TRF 350.200P 5000/500 2000 1600 80 40 275 213 3 100MC5043
TRF 465.120P* 6500/600 1200 1050 100 55 365 193 4 100MC5044
TRF 465.135P* 6500/600 1350 1150 100 55 365 213 4 100MC5045
TRF 465.160P* 6500/600 1600 1300 100 55 367 258 4 100MC5046
TRF 465.180P* 6500/600 1800 1500 100 55 367 278 4 100MC5047
TRF 480.180P* 8000/600 1800 1500 100 55 350 310 4 100MC5050
TRF 480.200P* 8000/600 2000 1650 100 55 350 362 4 100MC5049
TRF 480.220P* 8000/600 2200 1850 100 55 351 368 4 100MC5051
TRF 480.240P* 8000/600 2400 1950 100 60 351 425 4 100MC5052
TRF 4120.220P* 12 000/600 2200 1850 115 56 350 520 4 100MC5053
TRF 4120.240P* 12 000/600 2400 1900 115 58 352 520 4 100MC5054
660
MASTS & BOOMS
Sideshifters
DUAL AND TRIPLE SIDESHIFTERS
W4
ISO 2328
ISO 2328
VCG
W44 10–410 W44 HCG
W6 LL
Technical details:
• 2DL: 1 hydraulic function – fixed rear frame (no sideshifter)
• 3DL: 2 hydraulic functions – main sideshifter on the rear frame
• Without forks
* Triple sideshifter
Standard version with flow divider: both sideshifters move simultaneously in opposite directions
Front sideshifters: independent movement on request
Model Capacity W4 W44 C LL HCG VCG Weight Stroke REF

@500 mm mm mm mm mm mm mm kg mm
2DL2220.170 2 x 1000 1700 2 x750 1100 124 61 226 235 2 x 200 100MC5055
2DL2220.200 2 x 1000 2000 2 x 900 1150 124 61 226 260 2 x 200 100MC5056
2DL2220.215 2 x 1000 2150 2 x 1000 1200 124 61 226 281 2 x 200 100MC5057
2DL3240.170 2 x 2000 1700 2 x 750 1100 129 63 275 305 2 x 200 100MC5058
2DL3240.200 2 x 2000 2000 2 x 900 1150 129 63 275 349 2 x 200 100MC5059
2DL3240.215 2 x 2000 2150 2 x 1000 1200 129 63 275 381 2 x 200 100MC5060
3DL2220.170* 2 x 1000 1700 2 x 750 1300 139 65 236 246 3 x 200 100MC5055*
3DL2220.200* 2 x 1000 2000 2 x 900 1350 139 65 236 271 3 x 200 100MC5056*
3DL2220.215* 2 x 1000 2150 2 x 1000 1400 139 65 236 292 3 x 200 100MC5057*
3DL3240.170* 2 x 2000 1700 2 x 750 1300 139 67 285 335 3 x 200 100MC5058*
3DL3240.200* 2 x 2000 2000 2 x 900 1350 139 67 285 379 3 x 200 100MC5059*
3DL3240.215* 2 x 2000 2150 2 x 1000 1400 139 67 285 409 3 x 200 100MC5060*
661
Booms
MASTS & BOOMS
CABLE GUIDE
TVH stocks a wide variety of trailer cable chains, specifically for reach stackers and spreaders. You can even find the
accessories such as connecting elements and partitions with us. Go to MyProductSearch to discover more references.
662
MASTS & BOOMS
Booms
CABLE GUIDE – NICE TO KNOW
MyTotalSource
Your interactive online webshop for spare parts
The user‑friendly search modules MyPartsFinder and MyProductSearch
allow you to always find the correct part. Alternatively, you can also easily
search by part number.
1. In MyPartsFinder you can find your parts by entering

vehicle specifications (make, type …)
2. With MyProductSearch you can find your part by entering

technical details.
MyProductSearch
Find your cable guide
It is also possible to search further via

MyProductSearch for a similar part with
other characteristics if necessary, or
the parts can also be compared to each
other.
663
Booms
MASTS & BOOMS
CABLE GUIDE – NICE TO KNOW
3. Search by part number
• Single line part inquiry: for a quick

price and lead time of only 1 item
• Multiple line part inquiry: for price and
lead time of several parts
• Instant price, availability and picture
The reference in the catalogue only

contains the most important info,
but once the reference is entered via
MyTotalSource, then extra info can be
consulted such as:
• Extra technical info
• Larger (and more specific) photographs
No login yet? Request your login details now via ecommerce@tvh.com

Help desk: T +32 56 43 48 66
664
MASTS & BOOMS
Chains
CHAINS & ACCESSORIES
A chain is as strong
as the weakest link!
Consult the ‘Chains &

accessories’ catalogue
(REF 37474860).
Go to downloads on www.tvh.com to view the catalogue online.
CHAINS – NICE TO KNOW
Only the chain links and pins to connect the chain to the anchor.
Never connect individual pieces of chain together. This will always void the warranty.
Be careful when choosing a pin.

Width of the connected chain anchor could be larger than the width of the chain on its own.
L2 most important length to fit to the anchor.
Anchor width < L2
Available in European OEM brand and Asian OEM brand.
665
Chains
MASTS & BOOMS
CHAINS – NICE TO KNOW
TVH has a solution for all your chain requirements. We supply quality chains for the most demanding applications,
cut to the desired length. In addition, we also have a wide variety of different accessories. 90% of our chains are
immediately available from stock. Each ordered chain is automatically accompanied by a chain certificate.
TVH collaborates with the top brands of the chain world. Both on the European market with brands such as
Rexnord, Sedis, Renold and Wippermann and on the Asian market with the brand Donghua. All roller chains are
Donghua‑branded. These original quality chains come supplied in bulk or cut to the desired length.
In addition to the standard high‑quality steel chains, we also supply corrosion‑resistant leaf chain (Dacromat). These
are suitable for use in extreme weather or extreme environment conditions.
You can find the desired chain type in this parts catalogue or in MyProductSearch, the online research module in
MyTotalSource. If neither of these can offer you a solution, then you can leave the research up to us. All you need to
do, is to fill in a technical sheet and we will do the rest.
You can also find the desired chain links, pins and anchors in this catalogue or MyProductSearch. Should you be
unable to find the correct reference, you can fill in a technical sheet and leave the identification to us.
TVH offers 2 types of measuring tools to measure the wear of your chains: the standard measuring tool and a
professional version where the elongation value is displayed in %. You can find these tools on page 684 of this
catalogue.
A good lubrication is essential for the lifespan of a chain. With our chain spray (REF 100MC4863) you can maintain
the chain optimally.
We supply a chain certificate with each chain order. This chain certificate automatically appears on your order
confirmation.
How to determine the correct chain length in the easiest way:

1. count the outer plates (marked in red)
2. multiply the # outer plates x 2
3. add 1
4. multiply this result by the pitch in mm
5. divide by 1000
This gives us the following formula: (((# outer plates x 2) + 1) x p) / 1000
The result is the chain length, expressed in metres.
Ending on inners:
1 1 1 + 3 outer links
step
Note: this formula can only be used for chains ending on the inner plates. If you have a chain ending on the outer
plates, this has to be clearly specified in the request.
666
MASTS & BOOMS
Chains
GENERAL INFO ABOUT LEAF CHAINS
General info about leaf chains

Leaf chains must be replaced once they display an elongation of maximum 3% (or 2% in the UK). This elongation can
be measured by means of a wear gauge. The measurement is performed across the piece of chain that runs over the
chain roller. This part of the chain is subjected to the most stress and is therefore the ideal measuring point.
In addition to wear, there are also other potential reasons to replace a lift chain:
• twisted or shifted chain pins
• cracked chain leaf due to corrosion or metal fatigue
• seized links
• damage to the chain due to an external cause
• a fracture in the chain due to an excessive load or incorrect lubrication
Some guidelines:
• Replace lift chains per set. If this is not done, the chains are subject to an unequal load. This will result in an
uneven wear, which might lead to breakage. A chain is subject to dynamic impact loads, which speed up the wear
process.
• Use the same type of chains as the chain that was originally fitted.
• Inspect chain rollers and anchors after removing the chains. In case of wear or breakage these must be replaced.
• Always replace the chain pin and link simultaneously with the chain.
• Never connect individual pieces of chain together. This will always void the warranty.
• Lubricate the chain on a regular basis. sing a chain spray extends the lifespan of the chain, making it more
resistant against corrosion and damage.
Chain disassembly
Although TVH offers chains “cut to length“, sometimes you may need to cut chains yourselves. We offer all kinds
of tools to cut roller chains. Select the right tool depending on chain type and pitch. For leaf chain disassembly, we
suggest 2 different ways depending on the chain pitch.
Small pitch chains (pitch ≤ 1 inch)

Although the use of pressing material is preferred, this procedure assumes the use of hammer and chain pin
extractor. The cutting should be done on a workbench or other sturdy support surface. First hit the pin with the
hammer until the head of the chain pin is equal with the plate, continue to drive the pin through the plates with a
hammer and chain pin extractor. The chain pin extractor should have a diameter slightly less than the pin link plate
aperture.
Large pitch chains (pitch > 1 inch)

Grind the head of the pin flush with the pin link. Remove the pin by using a hydraulic press and the matching toolkit.
Make sure you always remove the 2 pins fitted on one outer link. Do not damage other chain pins or links besides the
one you want to remove.
667
MASTS & BOOMS
TECHNICAL SHEET
CHAINS
Chains
CHAINS – TECHNICAL SHEET
Group Example Customer details

10-01-03-00
Type of machine: �� Price inquiry
Serial n° machine: �� Order
Code : TY-K x H x P x L x B x B2 x B3 x D1 x D2 x S x TY-SK x MAT x KIT x F1 x F2 x F3 x F4
TY-K � � � � � � � � � � Type of chain:

SR = simplex roller chain
DR = duplex roller chain
TR = triplex roller chain
QR = quadruplex roller chain
SK = leaf chain
H � � � � � � � � � � � � � Total height
P � � � � � � � � � � � � � Pitch length
L � � � � � � � � � � � � � Total length
B � � � � � � � � � � � � � Total width
B2 � � � � � � � � � � � � Inner link width
B3 � � � � � � � � � � � � Inner width
D1 � � � � � � � � � � � � Roller diameter
D2 � � � � � � � � � � � � Pin diameter
S � � � � � � � � � � � � � Plate thickness
TY-SK � � � � � � � � � Type of leaf chain, see combinations
MAT � � � � � � � � � � � Material:
ST = steel
SS = stainless steel
DA = dachromat (zinc plated)
KIT � � � � � � � � � � � � YES/NO, if chain lock(s) and/or chain anchor(s) are present
F1 � � � � � � � � � � � � Nominal breaking load, in kN
F2 � � � � � � � � � � � � Actual breaking load, in kN
F3 � � � � � � � � � � � � Test load, in kN
F4 � � � � � � � � � � � � Save working load, in kN/1 000 000 cycles
TVH PARTS NV
Brabantstraat 15 • 8790 Waregem • Belgium
T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh�com • www�tvh�com
RLP Gent – division Kortrijk 0425399042 • BTW BE 0425 399 042
BNP Paribas Fortis 285-0448248-40 • IBAN BE02 2850 4482 4840 • SWIFT/BIC GEBABEBB
668
MASTS & BOOMS
Chains
DIMENSIONS
Roller chain
P P P
Type SR Type DR
B2 B3
B B2 B3 B
D1 D2
L D1 D2
L
Type TR Type QR
B2 B3
B2 B3
B B
D1 D2
L D1 D2
L
669
Chains
MASTS & BOOMS
DIMENSIONS TECHNISCHE FICHE

Leaf chain
Groep Voorbeeld Gegevens klant
B
H
S P P P P P
L
D2
Type machine: �� Prijsaanvraag
Serienr� machine: Bestelling

COMBINATIONS
��
1 2 3 4 5 6 7 8 9 10 19
2x3 3x4 4x6 4x5 5x6 6x7 7x8 8x9 10x11
Alternatives Alternatives
11 12 41 13 40 14 20 15 17 18 16
2x2 4x4 4x6 6x6 6x8 8x8 4x4 8x8 10x10 10x10 12x12
32 21 24 25 36 22 33 30 29 35 28 34 23 27 26 31
4 6,5 20 6,5 4 7,5 14 4 7,5 4

14
3x4 4x4 4x4 4x4 4x6 6x6 4x4 6x6 6x6 8x8 8x8 10x10 3x3 4x5 4x6 6x6
37 38 39
9,5
4x4 6x6 6x6
TVH PARTS NV
T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh�com • www�tvh�com
670
MASTS & BOOMS
Chains
LEAF CHAINS WITHOUT PLASTIC INSERTS BL‑SERIES
Type Combination Pin Plate Plate Pin Tensile Info & used REF
diameter thickness depth length strength for
D2 S H B Per metre Chain link Chain pin
mm mm mm mm kN
1/2” pitch (12,70 mm)
BL434 3 x 4 5,08 2,06 12,10 17,20 42,50 Fiat, Snorkel 100MC4652 100MC4653 100MC4654
BL444 4 x 4 5,08 2,06 12,10 19,30 58,00 Jungheinrich 100MC4655 100MC4656 100MC4657
BL446 4 x 6 5,08 2,06 12,10 23,50 58,00 Hyster, Clark 100MC4658 100MC4659 100MC4660
BL466 6 x 6 5,08 2,06 12,10 27,80 90,00 Haulotte 100MC4661 100MC4687 100MC4713
5/8” pitch (15,875 mm)
BL523 2 x 3 5,95 2,46 15,10 15,00 40,10 Fiat, Still 107MC4662 100MC4688 100MC4714
BL534 3 x 4 5,95 2,46 15,10 19,90 60,00 100MC4663 100MC4689 100MC4715
BL544 4 x 4 5,95 2,46 15,10 22,40 78,00 100MC4664 100MC4690 100MC4716
BL546 4 x 6 5,95 2,46 15,10 27,30 78,00 100MC4665 100MC4691 100MC4717
BL566 6 x 6 5,95 2,46 15,10 32,30 120,00 100MC4666 100MC4692 100MC4718
BL588 8 x 8 5,95 2,38 15,00 42,60 174,00 Clark 100MC4667 100MC4693 100MC4719
3/4” pitch (19,05 mm)
BL623 2 x 3 7,94 3,23 18,20 20,00 60,00 100MC4668 100MC4694 100MC4720
BL634 3 x 4 7,94 3,10 17,80 26,40 73,40 100MC4669 100MC4695 100MC4721
BL644 4 x 4 7,94 3,10 17,80 29,50 97,80 100MC4670 100MC4696 100MC4722
BL646 4 x 6 7,94 3,30 18,10 37,25 120,00 100MC4671 100MC4697 100MC4723
BL666 6 x 6 7,94 3,25 17,80 42,60 181,50 100MC4672 100MC4698 100MC4724
1” pitch (25,40 mm)
BL823 2 x 3 9,53 4,00 23,60 24,60 84,50 100MC4673 100MC4699 100MC4725
BL834 3 x 4 9,53 4,00 23,60 33,10 126,70 100MC4674 100MC4700 100MC4726
BL844 4 x 4 9,53 4,00 23,60 37,40 169,00 100MC4675 100MC4701 100MC4727
BL846 4 x 6 9,53 4,00 23,60 45,50 169,00 100MC4676 100MC4702 100MC4728
BL866 6 x 6 9,53 4,00 23,60 54,00 253,50 100MC4677 100MC4703 100MC4729
1 1/4” pitch (31,75 mm)
BL1023 2 x 3 11,11 4,88 29,60 28,70 145,00 Caterpillar, 100MC4678 100MC4704 100MC4730
Mitsubishi
BL1034 3 x 4 11,11 4,88 29,60 38,60 244,00 100MC4679 100MC4705 100MC4731
BL1046 4 x 6 11,11 4,88 29,60 53,50 310,00 100MC4680 100MC4706 100MC4732
BL1066 6 x 6 11,11 4,88 29,60 63,40 450,00 100MC4681 100MC4707 100MC4733
1 1/2” pitch (38,10 mm)
BL1234 3 x 4 12,71 5,68 35,90 45,10 305,00 100MC4682 100MC4708 100MC4734
BL1246 4 x 6 12,71 5,68 35,90 62,70 405,00 100MC4683 100MC4709 100MC4735
BL1266 6 x 6 12,71 5,68 35,90 74,20 560,00 100MC4684 100MC4710 100MC4736
1 3/4” pitch (44,45 mm)
BL1434 3 x 4 14,28 6,38 41,90 51,20 316,00 100MC4685 100MC4711 100MC4737
BL1446 4 x 6 14,28 6,30 40,80 71,50 382,60 100MC4686 100MC4712 100MC4738
671
Chains
MASTS & BOOMS
LEAF CHAINS WITHOUT PLASTIC INSERTS AL‑SERIES
mm mm mm mm kN
5/8” pitch (15,875 mm)
AL544 4 x 4 5,08 1,97 12,85 18,90 57,00 Genie 100MC4739 100MC4746 100MC4657
AL566 6 x 6 5,08 2,08 12,70 27,60 85,00 100MC4740 100MC4747 100MC4713
3/4” pitch (19,05 mm)
AL644 4 x 4 5,95 2,46 15,30 22,40 80,00 100MC4741 100MC4748 100MC4716
AL666 6 x 6 5,95 2,46 15,30 32,30 120,00 100MC4742 100MC4749 100MC4718
1” pitch (25,40 mm)
AL844 4 x 4 7,94 3,06 20,20 28,20 156,00 100MC4743 100MC4750 100MC4722
AL866 6 x 6 7,94 3,23 20,70 42,40 186,00 100MC4744 100MC4751 100MC4724
1 1/4” pitch (31,75 mm)
AL1066 6 x 6 9,53 4,00 25,70 52,40 265,00 100MC4745 100MC4752 100MC4873
LEAF CHAINS WITHOUT PLASTIC INSERTS LL‑SERIES
mm mm mm mm kN
1/2” pitch (12,70 mm)
LL0844 4 x 4 4,45 1,34 11,50 13,00 36,40 Haulotte, 100MC4753 100MC4763 100MC4773
Saxby
5/8” pitch (15,875 mm)
LL1044 4 x 4 5,08 1,65 12,10 16,40 44,50 BT, Fiat 100MC4754 100MC4874 100MC4764
LL1066 6 x 6 5,08 1,65 12,10 22,80 69,00 100MC4755 100MC4881 100MC4774
3/4” pitch (19,05 mm)
LL1244 4 x 4 5,72 1,85 14,30 17,80 61,00 100MC4756 100MC4875 100MC4775
LL1266 6 x 6 5,72 1,85 14,30 25,50 91,50 100MC4757 100MC4882 100MC4776
1” pitch (25,40 mm)
LL1644 4 x 4 8,27 3,06 20,20 28,10 155,00 100MC4758 100MC4876 100MC4777
LL1666 6 x 6 8,27 3,06 20,20 40,50 216,00 Kalmar, Still 100MC4759 100MC4877 100MC4778
1 1/4” pitch (31,75 mm)
LL2044 4 x 4 10,17 3,56 25,30 33,40 190,00 100MC4760 100MC4878 100MC4770
1 1/2” pitch (38,10 mm)
LL2444 4 x 4 14,63 5,08 30,70 46,80 340,00 Kalmar 100MC4761 100MC4879 100MC4779
LL2466 6 x 6 14,63 5,00 33,00 68,30 510,00 100MC4762 100MC4880 100MC4772
672
MASTS & BOOMS
Chains
ROLLER CHAINS, MOST COMMON TYPES METRE REFERENCE
Type Pitch Inner Roller Pin Inner Plate Pin Strength Weight REF
width diameter diameter width height length
P B3 min D1 max D2 max B2 max H max L max FB q Per metre Connecting
link
mm mm mm mm mm mm mm kN kg/m
Simplex chain
05B‑1 8,000 3,00 5,00 2,31 4,77 7,10 8,60 5,00 0,18 100MC4780 100MC4793
06B‑1 9,525 5,72 6,35 3,28 8,53 8,30 13,50 9,00 0,41 100MC4781 100MC4794
12B‑1 19,050 11,68 12,07 5,72 15,62 15,90 22,30 29,00 1,15 100MC4782 100MC4795
16B‑1 25,400 17,02 15,88 8,28 25,40 20,50 35,40 60,00 2,60 100MC4783 100MC4796
20B‑1 31,750 19,56 19,05 10,19 29,00 25,70 40,40 95,00 3,70 100MC4784 100MC4797
Duplex roller chain
16B‑2 25,400 17,02 15,88 8,28 25,40 20,50 67,40 106,00 5,30 100MC4785 100MC4798
Simplex chain
ANSI 35‑1 9,525 4,68 5,08 3,58 7,47 9,00 12,00 7,90 0,33 100MC4786 100MC4799
ANSI 40‑1 12,700 7,85 7,95 3,96 11,15 11,60 16,30 14,10 0,62 100MC4787 100MC4800
ANSI 50‑1 15,875 9,40 10,16 5,08 13,80 14,60 20,30 22,20 1,01 100MC4788 100MC4801
ANSI 60‑1 19,050 12,57 11,91 5,94 17,70 17,70 25,70 31,80 1,48 100MC4789 100MC4802
ANSI 100‑1 31,750 18,90 19,05 9,53 27,40 29,20 39,40 88,50 3,76 100MC4790 100MC4803
Duplex roller chain
ANSI 50‑2 15,875 9,40 10,16 5,08 13,80 14,60 38,50 44,40 2,00 100MC4791 100MC4804
ANSI 60‑2 19,050 12,57 11,91 5,94 17,70 17,70 48,50 63,60 2,95 100MC4792 100MC4805
673
Chains
MASTS & BOOMS
CHAIN REELS
Type REF
10‑metre reel 30‑metre reel 50‑metre reel Connecting link
AL644 100MC4883 100MC4915 100MC4947
AL666 100MC4884 100MC4916 100MC4948
AL844 100MC4885 100MC4917 100MC4949
AL866 100MC4886 100MC4918 100MC4950
AL1066 100MC4887 100MC4919 100MC4951
BL446 100MC4888 100MC4939 100MC4952
BL523 100MC4889 100MC4940 100MC4953
BL534 100MC4890 100MC4941 100MC4954
BL544 100MC4891 100MC4942 100MC4955
BL546 100MC4892 100MC4943 100MC4956
BL566 100MC4893 100MC4944 100MC4957
BL623 100MC4894 100MC4920 100MC4958
BL634 100MC4895 100MC4921 100MC4959
BL644 100MC4896 100MC4922 100MC4960
BL646 100MC4897 100MC4923 100MC4961
BL666 100MC4898 100MC4924 100MC4962
BL822 100MC4899 100MC4925 100MC4963
BL823 100MC4900 100MC4926 100MC4964
BL834 100MC4901 100MC4927 100MC4965
BL844 100MC4902 100MC4928 100MC4966
BL846 100MC4903 100MC4929 100MC4967
BL866 100MC4904 100MC4930 100MC4968
BL1023 100MC4905 100MC4931 100MC4969
BL1034 100MC4906 100MC4932 100MC4970
BL1046 100MC4907 100MC4933 100MC4971
LL1044 100MC4908 100MC4945 100MC4972
LL1066 100MC4909 100MC4946 100MC4973
LL1244 100MC4910 100MC4934 100MC4974
LL1266 100MC4911 100MC4935 100MC4975
LL1622 100MC4912 100MC4936 100MC4976
LL1644 100MC4913 100MC4937 100MC4977
LL1666 100MC4914 100MC4938 100MC4978
674
MASTS & BOOMS
Chains
LEAF CHAIN WITH PLASTIC INSERTS METRE REFERENCE
23,60 mm 1,10 mm 3,40 mm
32,00 mm
26,60 mm
16,40 mm max 7,94 mm 3,40 mm
35,80 mm
17,90 mm
41,50 mm
19,05 mm 19,05 mm min 7,94 mm

• Type: 080
• Used for Linde
Pin diameter Plate thickness Plate depth Pin length Tensile strength Weight REF
mm mm mm mm kN kg/m Per metre Chain link Chain pin
7,94 3,40 17,90 26,60 62 2,20 100MC4806 100MC4807 100MC4830
7,50 mm 4,00 mm
61,20 mm
24,00 mm
25,40 mm 9,53 mm

• Type: 102
• Used for Linde
9,53 4,00 24,00 61,20 319,5 7,50 100MC4808 100MC4818 100MC4826

max 13,40 mm
max 68,50 mm
max 64,50 mm
30° max 9,53 mm

max 24,00 mm
25,40 mm 25,40 mm min 9,53 mm

• Type: 104
• Used for Linde
9,53 4,00 24,00 68,50 315 7 100MC4809 100MC4819 100MC4831
675
Chains
MASTS & BOOMS
max 52,50 mm
max 26,30 mm
3,05 mm
max 8,27 mm
20,50 mm
25,40 mm 25,40 mm min 8,27 mm

• Type: 105
• Used for Linde
8,27 3,05 20,50 52,50 116 3 100MC4810 100MC4820 100MC4832

max 64,00 mm
max 59,60 mm
3,05 mm
max 8,27 mm
20,50 mm
25,40 mm 25,40 mm min 8,27 mm

• Type: 106
• Used for Linde
8,27 3,05 20,50 59,50 174 4,20 100MC4811 100MC4821 100MC4833

7,50 mm 4,00 mm
78,10 mm
9,53 mm
21,00 mm
25,40 mm

• Type: 108
• Used for Linde
9,53 4,00 21,00 78,10 294,20 6,00 100MC4812 100MC4822 100MC4834
676
MASTS & BOOMS
Chains
4,00 mm
20,00 mm
57,50 mm
9,53 mm
23,60 mm
25,40 mm

• Type: 109
• Used for Linde
9,53 4,00 23,60 57,50 210 4,90 100MC4813 100MC4823 100MC4826
max 36,60 mm max 26,30 mm

1,30 mm 11,50 mm
max 41,50 mm
33,70 mm
max 8,27 mm 3,05 mm
44,50 mm
20,50 mm
25,40 mm 25,40 mm min 8,27 mm

• Type: 110
• Used for Linde
8,27 3,05 20,50 36,60 116 2,80 100MC4814 100MC4824 100MC4835

max 65,00 mm
max 59,40 mm
4,00 mm
max 9,53 mm
24,00 mm
25,40 mm 25,40 mm

• Type: 111
• Used for Linde
9,53 3,05 24,00 59,50 253 8,50 100MC4815 100MC4827 100MC4825
677
Chains
MASTS & BOOMS
4,00 mm
20,00 mm
57,50 mm
9,53 mm
24,00 mm
25,40 mm

• Type: 116
• Used for Linde
9,53 4,00 24,00 57,50 210 4,95 100MC4816 100MC4828 100MC4826

86,60 mm
7,50 mm
11,11 mm 4,50 mm
25,40 mm
31,75 mm

• Type: 119
• Used for Linde
11,11 4,50 25,40 86,60 465 9,10 100MC4817 100MC4829 100MC4836

27,40 mm
4,50 mm
5,95 mm 2,46 mm
24,00 mm
15,10 mm
15,88 mm

• Type: BL544KS
• Used for Toyota
5,95 2,46 15,10 27,40 66,70 2,30 100MC4837 100MC4838 100MC4839
678
MASTS & BOOMS
Chains
29,70 mm
6,20 mm
7,92 mm 3,10 mm
29,30 mm
18,20 mm
19,05 mm

• Type: BL644KS
• Used for Toyota
7,92 3,10 14,60 29,70 120 2,90 100MC4840 100MC4841 100MC4842

27,40 mm
4,50 mm
5,95 mm 2,46 mm
24,00 mm
15,10 mm
15,88 mm

• Type: BL834LKS
• Used for Still
9,53 4,00 24,00 40,00 125 4,20 100MC4843 100MC4844 100MC4845

29,70 mm
6,20 mm
7,92 mm 3,10 mm
29,30 mm
18,20 mm
19,05 mm

• Type: BL844LKS
• Used for Still
mm mm mm kN kg/m Per metre Chain link Chain pin
9,53 4,00 24,00 45,00 213 4,90 100MC4846 100MC4847 100MC4848
679
Chains
MASTS & BOOMS
52,30 mm
8,00 mm
11,11 mm 4,70 mm
29,90 mm
31,75 mm

• Type: BL1044KS
• Used for Still
mm mm mm kN kg/m Per metre Chain pin
11,11 4,88 29,60 52,20 303 7,20 100MC4849 100MC4850
1,85 mm
22,20 mm
4,00 mm
5,07 mm
16,30 mm
19,05 mm

• Type: FU194K
• Used for Jungheinrich
mm mm mm mm kN kg/m Per metre Chain pin
5,72 1,85 16,30 22,20 85 2,10 100MC4851 100MC4856

35,60 mm
4,00 mm
6,50 mm 2,35 mm
18,20 mm
19,05 mm

• Type: FU196SK
6,50 2,35 18,20 35,60 99 3 100MC4852 100MC4855 100MC4857
680
MASTS & BOOMS
Chains
45,00 mm
4,00 mm
6,50 mm 2,35 mm
18,10 mm
19,05 mm

• Type: FU198K
mm mm mm mm kN kg/m Per metre Chain pin
6,50 2,35 18,10 45,00 138 4,80 100MC4853 100MC4858

56,00 mm
4,00 mm
6,50 mm 2,35 mm
18,10 mm
19,05 mm

• Type: FU191SK
Pin diameter Plate thickness Plate depth Pin length Tensile strength REF
mm mm mm mm kN Per metre Chain pin
6,50 2,30 18,10 56,00 215 100MC4854 100MC4859

58,50 mm
4,00 mm
9,53 mm 4,00 mm
23,60 mm
25,40 mm

• Type: BLK866
mm mm mm mm kN kg/m Per metre
11,11 4,00 23,60 58,50 303 7,20 100MC4849
681
MASTS & BOOMS
TECHNICAL SHEET
CHAIN ANCHOR
Chains
CHAIN ANCHORS – TECHNICAL SHEET
Group Example Customer details

10-01-06-00
Type of machine: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Price inquiry
Serial n° machine: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order
TY-TK x L1 x TA x Pm x Pi x RH/LH x L2 x D1 x D2 x AT-GL x LG-GL x B1 x B2 x B3 x TY-K1 x

Code:
TY-K2 x SL
TY-KT . . . . . . . . . Type of chain anchor

L1 . . . . . . . . . . . . Total length
TA . . . . . . . . . . . . Thread type (if any)
Pm . . . . . . . . . . . Pitch (metric)
Pi . . . . . . . . . . . . Pitch (inch)
RH/LH . . . . . . . . RH-thread or LH-thread
L2 . . . . . . . . . . . . Thread length
If no thread, then L2 is measured in a 90-degree angle to L1 and D1
D1 . . . . . . . . . . . . Diameter of the chain pin hole
D2 . . . . . . . . . . . . Diameter of the anchor pin hole
AT-GL . . . . . . . . . Number of slots
LG-GL . . . . . . . . . Position of slots, see pictures
B1 . . . . . . . . . . . . Dimensions as per pictures
B2 . . . . . . . . . . . . Smallest distance between the slots
B3 . . . . . . . . . . . . Largest distance between the slots
TY-K1 . . . . . . . . . Type of chain
TY-K2 . . . . . . . . . Type of chain
SL . . . . . . . . . . . . Is there a chain lock? YES/NO
TVH PARTS NV
T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh .com • www .tvh .com
682
MASTS & BOOMS
Chains
CHAIN ANCHORS – TECHNICAL SHEET
TYPES TECHNISCHE FICHE

Type NI Type NU
With inner thread With outer thread
TA
TA
Groep Voorbeeld Gegevens klant
L2 L2
B3 B1
B2, B3
B1 B2
L1
L1
D1 D1
L2 = length of internal thread
Type machine: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Prijsaanvraag

Type OH Type O
Serienr . machine:
Holes are in a . . .90°
. . . . .angle
. . . . . . . .to
. . .each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Holes
. . . . . . .other . . . . . . . . .are
. . . . .aligned
. . . . . . . . . .in
. . .the Bestelling
. . same direction
B1 D2
B2, B3
D2
B2, B3 L1
B1
D1 D1
L1
Type S
Very special, none of the above types .
Please fill out as many of the dimensions as possible, and add a drawing of the chain anchor
POSITION OF THE CHAIN ANCHOR

Type I Type U
Between the chain Over the chain
TVH PARTS NV
T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh .com • www .tvh .com
683
Chains maintenance, repair & operations
MASTS & BOOMS
CHAIN SPRAY
• High‑quality spray to lubricate chain‑driven transmissions

that are subject to heavy load
• To be processed like oil with the properties of grease
• Resistant to weather influence, weak acids and bases
• Water‑repellent
• Content: 400 ml
REF 100MC4863
HIGH SPEED CHAIN OIL
• Water‑resistant chain lubricant

• High‑quality mineral and synthetic oils, anti‑oxidation and
antiwear additives, friction modifiers and tackiness agents
• Penetrates deeply into vital chain pin and bushing areas,
and sets to form an adhering, long‑lasting lubricant film
• For highly loaded fast‑running chains used in corrosive,
high power and shock load conditions
• Content: 500 ml
REF 100MC9538
PROFESSIONAL CHAIN WEAR GAUGE
Measure the degree of wear of a chain: a value of 2% or

more means that the chain must be replaced
REF 100MC4862
PROFESSIONAL CHAIN WEAR GAUGE
• Chain wear gauge in synthetic material

• Indicates the level of chain wear
REF 100MC4861
684
MASTS & BOOMS
Chains maintenance, repair & operations

MULTIFUNCTIONAL MANUAL HYDRAULIC PRESS
760 mm
300 mm
335 mm
305 mm
720 mm
REF 100MC4860
This multifunctional hydraulic press is designed for:

• Cutting forklift chains
• Cutting and crimping of battery cables
• Pressing bearings
The press can be operated manually, but can also be set up for a dual control mode, allowing for the press to be operated
by an additional external hydraulic unit.
The standard reference includes only the press, additional options can be bought separately.
Accessories
REF 100MC4980
REF 100MC4979 Leaf chain cutting tool kit
Chain cutting tool kit AL4 – – EL4 – – BL4 – – REF 100MC4981
BL544KS TOYOTA – CESAB AL5 – – EL5 – – BL5 – – Battery cable cutting kit
TYPE 080 – 105 – 110 – 111 LINDE – AL6 – – EL6 – – BL6 – – Diameter: 16 – 25 – 35 – 50 – 70 –
OM – STILL EL8 – – BL8 – –* 90 mm²
A
B
A B
17 mm 38 mm
20 mm 40 mm
REF 100MC4982
Tool kit for electric cables/connectors REF 100MC4983 20 mm 45 mm
Diameter: 16 – 25 – 35 – 50 – 70 mm² Tool kit for cable press 25 mm 50 mm
685
Forks – fork calibrator
MASTS & BOOMS
WEAR CALIPER FOR FORKS
Capacity (%)/fork
100
80
Dangerous!
10 20 Usage (%)
Original profile
B A
100%
Fork OK Replace fork

(< 10% wear) (> 10% wear)
A. Inside jaws 90%

B. Outside jaws 100%
REF 100MC7315
WEAR CALIPER FOR FORKS
When fork wear exceeds 10% of nominal thickness, the fork

has to be replaced (ISO 5057)
Instructions:
• Determine nominal thickness “N” of fork using scale (for
example of back of the fork)
• Apply opening allocated to the nominal thickness “N” (for
example N45 for the 45 mm nominal thickness) to the
area with the greatest wear
• If the opening fits over the fork, the fork has to be
replaced
REF 100MC7316
686
MASTS & BOOMS
Forks – parts for forks

FORK LATCH PIN KITS
B
For use with CAM attachments‑branded forks
A
Type Dimensions REF
Ø A B
mm mm mm
FEM 2 15 55,0 13,0 100MC7347
FEM 3 15 59,5 16,0 100MC7348
FEM 4 16 69,5 16,0 100MC7349
Other dimensions on request
687
Reels
MASTS & BOOMS
HOSE REELS
Type Reel Max hose length Hose type Mast height Brand REF
Ø Duplex Triplex
mm mm m m
RH 275 4,0 Double synflex 1/4” 6 5 TotalSource 100MC4169
LH 275 4,0 Double synflex 1/4” 6 5 TotalSource 100MC4170
RH 420 6,7 Double synflex 3/8” 11,5 9,5 TotalSource 100MC4190
LH 420 6,7 Double synflex 3/8” 11,5 9,5 TotalSource 100MC4191
RH 420 4,7 Double synflex 1/2” 9 7,5 TotalSource 100MC4195
LH 420 4,7 Double synflex 1/2” 9 7,5 TotalSource 100MC4196
RH 280 3,9 Double synflex 1/4” 6,3 4,8 Cascade 100MC3182
LH 280 3,9 Double synflex 1/4” 6,3 4,8 Cascade 100MC3183
LH 330 4,6 Double synflex 3/8” 7,1 5,5 Cascade 100MC3185
RH 385 4,3 Double synflex 3/8” 4,3 4,9 Linde 100MC7354
LH 385 4,3 Double synflex 3/8” 4,3 4,9 Linde 100MC7355
Please consult our hydraulic parts & accessories catalogue for individual components
688
MASTS & BOOMS
Reels
SWIVEL JOINT FOR 2 HOSES
47 mm 96,5 mm
B B
A A
A: outlet adapter 124 mm Mounting

B: inlet adapter hole 13/32
Outlet adapter Inlet adapter REF

With valve Without
check valve
100MC4234 100MC4235
1/4” BSP 1/4” BSP 100MC4236 100MC4249
3/8” BSP 3/8” BSP 100MC4237 100MC4250
9/16” JIC 9/16” JIC 100MC4238 100MC4251
3/4” 16 UNF 3/4” 16 UNF 100MC4239 100MC4252
Specifications Pressure drop
M16 x 1,5 (24°) M16 x 1,5 (24°) 100MC4240 100MC4253
Flow 19 litres 38 litres
3/8” BSP 1/4” BSP 100MC4241 100MC4254
REF 100MC4234 2,8 bar 8,5 bar
3/8” BSP 9/16” JIC 100MC4242 100MC4255
(with check valve)
1/4” BSP 9/16” JIC 100MC4243 100MC4256
REF 100MC4235 2,0 bar 6,8 bar
(without check valve) 9/16” JIC 3/8” BSP 100MC4244 100MC4257
9/16” JIC 1/4” BSP 100MC4245 100MC4258
9/16” JIC 100MC4246 100MC4259
• Pressure range up to 300 bar
• 180° rotation M18 x 1,5 3/8” BSP 100MC4247 100MC4260
• Swivel joints are available with or without check valve M16 x 1,5 (60°) M16 x 1,5 (60°) 100MC4248 100MC4261
ELECTRIC CABLE REELS
135 mm
• Automatic, with cable lock system

156 mm
185 mm
100 mm
• Swivel bracket
• Cable: 3 x 1,5 mm²
• Capacity: 800 W
Ø 8 mm
• Supplied with mounting bracket and hose stopper
30 mm
220 mm
REF 100MC7364 –– Cable length: 5 m
689
Reels
MASTS & BOOMS
ELECTRIC CABLE REEL
Dimensions:
• PVC cable diameter: 7 mm; 3 G: 1,5 mm²
• Cable length: 11,5 m
10 m coiled cable length + 1,5 m uncoiled cable length
• kW (20 °C): 1,8 kW (230 V)
• kW (20 °C): 1,2 kW (230 V)
145 mm 310 mm
Technical features:
• Shock‑resistant plastic external case
• Cable roller guide
• Ratchet stop device every 500 mm, easily removable if
constant traction of cable is required
290 mm
200 mm
• Collector insulating power: 2,5 kV

• Double earth contact
• Slip ring with brass rings and brushes
• Protection degree: IP42
• Working temperature: −5 to 50 °C
8,5 mm • Delivered without cable at supply side
REF 100MC7368
ELECTRIC CABLE REEL
Dimensions:
• Cable diameter: 7 mm, 3 G: 1,5 mm²
• Cable length: 15 m
14 m coiled cable length + 1 m uncoiled cable length
• Maximum voltage: 500 V
• kW (20 °C): 1,8 kW (230 V)
• kW (20 °C): 1,2 kW (230 V)
Technical features:
• Shock resistant plastic external case
• Cable roller guide
• Ratchet stop device every 500 mm, easily removable if
constant traction of cable is required
• Delivered without cable at supply side
• With thermal protector
• With PVC cable
REF 100MC7366
690
MASTS & BOOMS
Reels
ELECTRIC CABLE REEL
Dimensions:
• PVC cable diameter: 7,5 mm; 3 G: 1,5 mm²
5 m coiled cable length + 1 m uncoiled cable length
• Maximum voltage: 500 V
1 2 • Max 1,9 kW
Technical features:
• Shock‑resistant plastic external case
• Ratchet stop device every 500 mm easily removable if
115 mm 100 mm 120 mm
constant traction of cables is required
=
100 mm
• With thermal protector

=
1. REF 100MC7361
50 mm R95 7 mm 2. REF 100MC7362 –– With AC plug
–– Output: female edge grounded
–– Input: male pin grounded
ELECTRIC CABLE REEL
• Made from ABS plastic, shock‑resistant and anti‑corrosive

• Electric cable reel with mounting block (for use in
workshop)
• Flexible, oil‑resistant 3‑core cable 1,5 mm²

–– Max power: 1000 W
–– Max power: 1200 W
691
Reels
MASTS & BOOMS
RIGHT‑HAND ELECTRIC CABLE REEL
• Automatic with slip ring contact

• Cable: 4 x 1,5 mm²
• Cable diameter: 9,3 mm
• Capacity: 400 V, 30 A on the slip rings
• For vertical and horizontal use
• Supplied with mounting bracket
• Diameter: 295 mm
• Width: 180 mm
• Working temperature: −30 °C to 60 °C
REF 100MC7358 –– Only electric cable reel

REF 100MC7359 –– Cable stopper
REF 100MC7360 –– Kit: electric cable reel and stopper
692
MASTS & BOOMS
Mast
MAST ROLLERS
Please consult our Mast roller catalogue REF 7872482
Go to downloads on www.tvh.com to view the catalogue online.
693
Mast
MASTS & BOOMS
MAST ROLLERS – NICE TO KNOW
MyTotalSource
Your interactive online webshop for spare parts
The user‑friendly search modules MyPartsFinder and MyProductSearch
allow you to always find the correct part. Alternatively, you can also easily
search by part number.
1. In MyPartsFinder you can find your parts by entering

vehicle specifications. (make, type …)
2. With MyProductSearch you can find your part by entering

technical details.
MyProductSearch
Find your mast rollers
• Log on to MyTotalSource
• Go to ‘Parts Look‑up’ and choose
MyProductSearch
• Choose the group ‘Mast parts and
attachments’
Then go to ‘Mast roller and accessories’
694
MASTS & BOOMS
Mast
MAST ROLLERS – NICE TO KNOW
Choose the right type and enter the right

measurements to get a list of possible
options
3. Search by part number
Click on the Euro symbol to get a pop‑up

inquiry or click on the i‑button to see the
technical details.
• Single line part inquiry: for a quick

price and lead time of only 1 item
• Multiple line part inquiry: for price and
lead time of several parts
• Instant price, availability and picture
No login yet? Request your login details now via ecommerce@tvh.com

Help desk: T +32 56 43 48 66
695
Mast
MASTS & BOOMS
MAST PROFILE INNER–OUTER
S
Length on request
C H B S K Weight REF
R5 mm mm mm mm mm kg
62,5 86,5 36 7,5 12 10,5 100MC7369
H C
70,8 103,2 40,0 7,7 15 14,8 100MC7370
78,7 121,3 41,0 10,8 15 20,9 100MC7371
K
89,4 135,4 53,0 12,7 15 28,6 100MC7372
108,4 157,2 61,2 14,0 15 35,9 100MC7373
B 123,8 175 66,2 16,2 15 42,9 100MC7374
150,1 201,5 71,2 19,4 20 52,3 100MC7375
MAST PROFILE
M
Length on request
R5
C H B S K M Weight REF
H S C mm mm mm mm mm mm kg
70 98 65,0 9,0 15 8 19,4 100MC7376
K 77,9 113,9 66,0 11,0 15 8 25,3 100MC7377
86,6 129,6 72,0 12,0 15 10 31,2 100MC7378
88,6 129,6 81,0 12,0 15 10 34,1 100MC7379
B
102,2 140,2 70,0 12,7 15 10 36 100MC7380
108,4 152,2 83,0 14,0 20 10 40,5 100MC7381
MAST PROFILE MAST PROFILE
5 mm
69,9 mm
135,4 mm
89,4 mm
104,2 mm
102,3 mm
60 mm
33 kg/m 40 mm 28,6 kg/m
27 mm 27 mm
53 mm
REF 100MC7382 REF 100MC7372
5 mm 17 mm
5 mm
16 mm
142 mm
110 mm
145 mm
101 mm
12 mm
70 mm
41 mm 28,5 kg/m 47,5 mm 22 kg/m

54 mm
REF 100MC7383 REF 100MC7384
696
MASTS & BOOMS
Mast
33 mm 45 mm 16 mm
16 mm
238 mm
138 mm
20 mm
100 mm
132 mm
12 mm
• 92 kg/m
97 mm
• Used for Hyster
24,7 kg/m 90 mm * Welded profile, not extruded
REF 100MC7385 REF 100MC7386*
MAST PROFILE
A C
A B C Weight REF
mm mm mm kg/m
108 60 75,5 22,0 100MC7387
130 75 90,0 34,0 100MC7388
B
150 84 106,0 41,0 100MC7389
180 85 130,0 50,0 100MC7390
67 mm
148,6 mm
114,7 mm
28,5 mm 28,5 mm
REF 100MC7391 Other profiles available on request!
697
Mast
MASTS & BOOMS
SPARE PARTS USED FOR CASCADE AND LIFT‑TEK ELECAR MAST
Type of mast REF

Seal kit free Seal kit main Chain sheave Hose sheave Mast roller Carriage mast Carriage side
cylinder lift cylinder roller roller
MT‑16 101MC1310 101MC1323 101MC1326 101MC1326
Quantity: 12 Quantity: 6
MT‑25 101MC1311 101MC1324 101MC1327 101MC1327
MT‑40 101MC1312 101MC1325 101MC1328 101MC1328
45C 101MC1313 101MC1327 101MC1327
101MC1333 101MC1333
35DMS, 40DMS 101MC1314 101MC1323 101MC3452 101MC1326 101MC1326 101MC3454
Working press: 140 bar Quantity: 4 or 6 Quantity: 4
35DMS, 40DMS 101MC1316 101MC1323 101MC3452 101MC1326 101MC1326 101MC3454
Working press: 180 bar Quantity: 4 or 6 Quantity: 4
55DMS, 60DMS, 55DMSE, 101MC1317 101MC1324 101MC3452 101MC1327 101MC1327 101MC3454
66DMSE Quantity: 6 Quantity: 4 or 6 Quantity: 4
35DMD, 40DMD 101MC1302 101MC1319 101MC1323 101MC3452 101MC1332 101MC1332 101MC3454
Quantity: 4 or 6 Quantity: 4
35DMT, 40DMT, 35DMTE, 101MC1302 101MC1314 101MC3452 101MC1326 101MC1326 101MC3454
40DMTE Quantity: 8 Quantity: 4 or 6 Quantity: 4
Working pressure: 140 bar
35DMT, 40DMT, 35DMTE, 101MC1304 101MC1316 101MC3452 101MC1326 101MC1326 101MC3454
40DMTE Quantity: 8 Quantity: 4 or 6 Quantity: 4
Working pressure: 180 bar
55DMT, 55DMTE 101MC1317 101MC1324 101MC3452 101MC1333 101MC1333 101MC3454
Quantity: 8 Quantity: 4 or 6 Quantity: 4
60DMT, 66DMTE, 66DMT 101MC1307 101MC1317 101MC1324 101MC3452 101MC1327 101MC1327 101MC3454
Quantity: 8 Quantity: 4 or 6 Quantity: 4
(*) Quantity as required
MAST SUPPORT
A
C
A
H
D
E
L
B
To move and stock forklift masts in a safe way Dimensions REF

B: Centre to centre of fork pockets B A C
mm mm mm
Technical details: 730 730 715 101MC1336
L: 1200 mm 850 850 835 101MC1337
H: 500 mm
D: 65 mm Also available with oil pan.
E: 140 mm Call our sales department!
698
MASTS & BOOMS
Fork carriages
FORK CARRIAGE PROFILES
B
1 2 3
Class H B C D REF
FEM mm mm mm mm Profile (1) Top Bottom
profile (2) profile (3)
2 60 50,0 16,0 13 100MC7392 100MC7403 100MC7414
2 80 30,0 16,0 13 100MC7393 100MC7404 100MC7415
2 110 32,0 16,0 13 100MC7394 100MC7405 100MC7416
2 110 38,0 16,0 13 100MC7395 100MC7406 100MC7417
2 127 32,0 16,0 13 100MC7396 100MC7407 100MC7418
2 150 38,0 16,0 13 100MC7397 100MC7408 100MC7419
2 152 32,0 16,0 13 100MC7398 100MC7409 100MC7420
3 148 40,0 21,5 16 100MC7399 100MC7410 100MC7421
3 180 38,0 21,5 16 100MC7400 100MC7411 100MC7422
3 180 45,0 21,5 16 100MC7401 100MC7412 100MC7423
4 180 57,0 25,5 19 100MC7402 100MC7413 100MC7424
FORK CARRIAGE PROFILES
Class H B C D Length REF

FEM mm mm mm mm mm Top profile Bottom
profile
2 100 40,0 16,0 13 1000 100MC7425 100MC7429
2 100 40,0 16,0 13 1200 100MC7426 100MC7430
3 150 40,0 21,5 16 1000 100MC7427 100MC7431
3 150 40,0 21,5 16 1200 100MC7428 100MC7432
699
CAM attachments forks
MASTS & BOOMS
FEM FORKS ACCORDING TO ISO STANDARDS
Class Section Capacity/ REF – fork length

pair
mm kg/mm 800 mm 900 mm 1000 mm 1070 mm 1100 mm 1150 mm 1200 mm 1300 mm
2A 80 x 40 2000/500 100MC9968 100MC9974
100MC9982 101MC1007 101MC1030 101MC1039 101MC3474
2A 100 x 35 1900/500 100MC9969 100MC9975
100MC9983 101MC1001 101MC1008 101MC1031 101MC3473 101MC3475
2A 100 x 40 2500/500 100MC9970 100MC9976
100MC9984 101MC1002 101MC1009 101MC1032 101MC1040 101MC3476
2A 100 x 45 3000/500 100MC9971 100MC9977
100MC9985 101MC1003 101MC1010 101MC1033 101MC1041 101MC3477
2A 120 x 40 3000/500 101MC3471 101MC3472 101MC1011 101MC1004 101MC1042 101MC3478
2A 125 x 40 3000/500 101MC1277 101MC1012 101MC1043
2A 125 x 45 4100/500 100MC9978 100MC9987 101MC1013 101MC1034 101MC1044 101MC3479
2B 80 x 40 2000/500 100MC9972 100MC9979 100MC9988 101MC1014 101MC1035 101MC1045
2B 100 x 35 1900/500 101MC1015 101MC1046
2B 100 x 40 2500/500 100MC9973 100MC9980 100MC9989 101MC1016 101MC1036 101MC1047 101MC1073
2B 100 x 45 3000/500 100MC9990 101MC1017 101MC1048
2B 120 x 40 3000/500 100MC9991 101MC1018 101MC1037 101MC1049
2B 125 x 45 4100/500 100MC9992 101MC1019 101MC1050
3A 100 x 45 3000/500 100MC9993 101MC1020 101MC1051 101MC1074
3A 100 x 50 3900/500 100MC9994 101MC1021 101MC1052
3A 120 x 50 4500/500 100MC9995 101MC1022 101MC1278 101MC1053
3A 125 x 45 4100/500 100MC9996 101MC1023 101MC1038 101MC1054 101MC1075
3A 125 x 50 5000/500 100MC9981 100MC9997 101MC1005 101MC1024 101MC1055 101MC1076
3A 130 x 60 7200/500 101MC1025 101MC1056 101MC1077
3A 150 x 50 5800/500 100MC9998 101MC1006 101MC1026 101MC1057 101MC1078
3A 150 x 60 7000/600 101MC1058
3B 100 x 50 3900/500 101MC1027 101MC1059 101MC1279
3B 125 x 45 4100/500 100MC9999 101MC1028 101MC1060 101MC1079
3B 125 x 50 5000/500 101MC1061 101MC1080
3B 150 x 50 5800/500 101MC1062 101MC1081
4A 130 x 60 7200/500 101MC1063
4A 150 x 50 5000/600 101MC1064
4A 150 x 60 7000/600 101MC1000 101MC1029 101MC1065 101MC1082
4A 150 x 65 8220/600 101MC1066
4A 150 x 70 9000/600 101MC1067 101MC1280
4A 200 x 60 9200/600 101MC1068
4A 200 x 70 12 000/600
4B 150 x 50 5000/600 101MC1069
4B 150 x 60 7000/600 101MC1070
4B 200 x 50 6500/600 101MC1071
4B 200 x 60 9200/600 101MC1072
700
MASTS & BOOMS

FEM FORKS ACCORDING TO ISO STANDARDS [CONTINUED]
High‑quality material:
Made of chromium‑manganese steel which quarantees a high mechanical strength.
Refined finish:
Manufactured on the basis of a rolled profile.
Observe the European standards:

ISO standards 2328 and 2330.
Extensive range:
TVH has an extensive range of CAM attachments forks in various dimensions.
TVH cerfified
Class Section Capacity/ REF – fork length

pair
mm kg/mm 1400 mm 1500 mm 1600 mm 1800 mm 2000 mm 2200 mm 2400 mm
2A 80 x 40 2000/500 101MC1083 101MC1112 101MC1140 101MC1166
2A 100 x 35 1900/500 101MC1084 101MC1113 101MC1141
2A 100 x 40 2500/500 101MC1085 100MC9986 101MC1142 101MC1167 101MC1193 101MC1218
2A 100 x 45 3000/500 101MC1086 101MC1114 101MC1143 101MC3759 101MC1194 101MC1219 101MC1231
2A 120 x 40 3000/500 101MC1087 101MC1115 101MC1144 101MC1168 101MC1195 101MC1232
2A 125 x 40 3000/500 101MC1285 101MC1088 101MC1116
2B 80 x 40 2000/500
2B 100 x 35 1900/500
2B 100 x 40 2500/500 101MC1090 101MC1118 101MC1146 101MC1170 101MC1197
2B 100 x 45 3000/500 101MC1091 101MC1284 101MC1147 101MC3760 101MC1281
2B 120 x 40 3000/500 101MC1092
2B 125 x 45 4100/500 101MC1093 101MC1148 101MC1171 101MC1198
3A 100 x 45 3000/500 101MC1094 101MC1119 101MC1149 101MC1172 101MC1199
3A 100 x 50 3900/500 101MC1095 101MC1120 101MC1150 101MC1173 101MC1200 101MC1234
3A 120 x 50 4500/500 101MC1096 101MC1121 101MC1151 101MC1174 101MC1201 101MC1235
3A 130 x 60 7200/500 101MC1099 101MC1124 101MC1154 101MC1177 101MC1204 101MC1238
3B 100 x 50 3900/500 101MC1102 101MC1127 101MC1157
3B 125 x 45 4100/500 101MC1103 101MC1128 101MC1158 101MC1180 101MC1207 101MC1241
3B 125 x 50 5000/500 101MC1104 101MC1129 101MC1159 101MC1181 101MC1208 101MC1242
3B 150 x 50 5800/500 101MC1105 101MC1130 101MC1160 101MC1182 101MC1209 101MC1225 101MC1243
4A 130 x 60 7200/500 101MC1106 101MC1131 101MC1161 101MC1183 101MC1210
4A 150 x 65 8220/600 101MC1134 101MC1186 101MC1213 101MC1246
4A 200 x 60 9200/600 101MC1136 101MC1188 101MC1215 101MC1229 101MC1248
4A 200 x 70 12 000/600 101MC1165 101MC1189 101MC1216 101MC1230 101MC1249
4B 150 x 50 5000/600 101MC1110 101MC1137 101MC1282 101MC1190
4B 150 x 60 7000/600 101MC1111 101MC1138 101MC1283 101MC1191 101MC1217 101MC1250
4B 200 x 50 6500/600
4B 200 x 60 9200/600 101MC1139 101MC1192
701
MASTS & BOOMS
BLANK FORKS
Section Fork length Back height Capacity/pair REF

mm mm mm kg/mm
80 x 40 1200 800 2000/500 101MC1251
80 x 45 1200 800 2600/500 101MC1252
80 x 50 1200 800 3200/500 101MC1253
100 x 40 1200 800 2500/500 101MC1254
120 x 40 1200 650 3000/500 101MC1255
125 x 45 1100 800 4100/500 101MC1256
125 x 45 1200 800 4100/500 101MC1257
125 x 50 1200 800 5000/500 101MC1258
125 x 50 1500 800 5000/500 101MC1259
150 x 50 1200 820 3800/500 101MC1260
150 x 60 1220 910 7000/600 101MC1261
150 x 60 1520 910 7000/600 101MC1262
150 x 60 1830 910 7000/600 101MC1263
150 x 60 2440 910 7000/600 101MC1264
180 x 60 1500 1000 9000/600 101MC1265
180 x 80 2400 1350 14 000/600 101MC1266
200 x 70 1830 1040 12 000/600 101MC1267
200 x 70 2440 1040 12 000/600 101MC1268
200 x 75 2400 1250 14 000/600 101MC1269
200 x 90 2400 1400 16 000/600 101MC1270
200 x 100 2400 1400 20 000/600 101MC1271
200 x 100 2400 1600 15 000/1200 101MC1272
250 x 100 2400 1600 18 000/1200 101MC1273
300 x 105 2400 1800 25 000/1200 101MC1274
300 x 110 2400 1800 28 000/1200 101MC1275
300 x 140 2400 1800 44 000/1200 101MC1276
702
MASTS & BOOMS

PIN‑TYPE FORKS
Used for Section Fork length Inner Ø tube Centre line height Capacity/pair REF
mm mm mm mm kg/mm
JCB 80 x 40 1067 45 568 2500/500 101MC1286
JCB 80 x 40 1070 45 572 2500/500 101MC1287
JCB 80 x 40 1200 45 572 2500/500 101MC1288
JCB 80 x 50 1200 58 572 4000/500 101MC1289
JCB 100 x 40 1070 52 569 3000/500 101MC1290
JCB 100 x 40 1200 52 569 3000/500 101MC1291
JCB 100 x 45 1067 52 570 3700/500 101MC1292
JCB 100 x 50 1067 58 570 4100/500 101MC1293
JCB 100 x 50 1200 52 570 4100/500 101MC1294
JCB 100 x 50 1200 58 570 4100/500 101MC1295
JCB 120 x 50 1200 58 570 5600/500 101MC1296
JCB 125 x 40 1200 52 570 3700/500 101MC1297
Manitou 125 x 40 1200 61,5 720 3000/500 101MC1298
Manitou 125 x 45 1200 61 720 4100/500 101MC1299
Manitou 125 x 45 1200 51 545 4100/500 101MC1300
Manitou 125 x 50 1200 61 540 5000/500 101MC1301
703
MASTS & BOOMS
POLYURETHANE‑COATED FORKS
Application: Features:
• To handle slippery loads like metal cages or plastic boxes • Coating thickness approx 5 mm
• To protect loads against damages and scratches due to • Shore hardness: 92 shore A
contact with bare forks • Abrasion resistance: 140 mg according to ASTM D 1044
• Tensile strength: 21 N/mm²
Benefits: • Operating temperature: −40 °C to 80 °C
• Increased safety at work: no risk due to slipping loads • Coating of fork blade and/or fork back
• Slip‑resistant in dry and even in wet condition • Permanently fixed to the fork
• Noise reduction, especially when transporting metal parts • Protection plate at the fork tip
in residential areas/at night • Less damages to the transported goods
• Protection of transported goods against damages or
scratches, e.g. transports without pallets (protection in
the fork back and heel area)
Interested?
• Abrasion‑ and cut‑resistant for optimum use and long Please contact your sales advisor.
lifespan
• High flexibility, available and retrofittable for many
different dimensions and applications
• Short delivery times
704
MASTS & BOOMS
CAM attachments fork extensions

FORK EXTENSIONS – CLOSED VERSION
Closed fork extension
W1
L Q
H
CG3
W2
• The existing fork must support at least 60% of the

extension length
100% length of fork extension
• In conformity with ISO 13284
Fork length at least 60% • Material thickness: 6 mm up to fork section 150 x 50 mm
• Material thickness: 8 mm starting from fork section
150 x 60 mm
• Supplied with locking pin
• Made in Europe
• Other sizes on request
Fork section REF – length of fork extension

W1 x T 1200 mm 1220 mm 1370 mm 1400 mm 1500 mm 1525 mm 1600 mm 1800 mm
mm
80 x 40 100MC9904 101MC3455 100MC9692 100MC9729 100MC9758
100 x 40 100MC9905 101MC3456 100MC9693 100MC9730 100MC9759
100 x 45 100MC9906 101MC3457 100MC9694 100MC9731 100MC9760
100 x 50 100MC9907 100MC9934 100MC9950 101MC3458 100MC9695 100MC9953 100MC9732 100MC9761
120 x 40 100MC9908 101MC3459 100MC9696 100MC9733 100MC9762
120 x 50 100MC9909 101MC3460 100MC9697 100MC9734 100MC9763
125 x 40 100MC9910 101MC3461 100MC9698 100MC9735 100MC9764
125 x 45 100MC9911 101MC3462 100MC9699 100MC9736 100MC9765
125 x 50 100MC9912 101MC3463 100MC9700 100MC9737 100MC9766
130 x 45 100MC9913 101MC3464 100MC9701 100MC9738 100MC9767
130 x 60 100MC9915 101MC3466 100MC9703 100MC9740 100MC9769
140 x 50 100MC9916 101MC3467 100MC9704 100MC9741 100MC9770
150 x 50 100MC9917 101MC3468 100MC9705 100MC9742 100MC9771
150 x 70 100MC9919 101MC3470 100MC9707 100MC9744 100MC9773

W1 x T 1829 mm 1982 mm 2000 mm 2134 mm 2200 mm 2400 mm 2440 mm 2500 mm
mm
80 x 40 100MC9787 100MC9816 100MC9845 100MC9874
100 x 40 100MC9788 100MC9817 100MC9846 100MC9875
100 x 45 100MC9789 100MC9818 100MC9847 100MC9876
120 x 40 100MC9791 100MC9820 100MC9849 100MC9878
120 x 50 100MC9792 100MC9821 100MC9850 100MC9879
125 x 40 100MC9793 100MC9822 100MC9851 100MC9880
125 x 45 100MC9794 100MC9823 100MC9852 100MC9881
125 x 50 100MC9795 100MC9824 100MC9853 100MC9882
130 x 45 100MC9796 100MC9825 100MC9854 100MC9883
130 x 60 100MC9798 100MC9827 100MC9856 100MC9885
140 x 50 100MC9799 100MC9828 100MC9857 100MC9886
150 x 50 100MC9800 100MC9829 100MC9858 100MC9887
150 x 70 100MC9802 100MC9831 100MC9860 100MC9889
705
CAM attachments fork extensions
MASTS & BOOMS
FORK EXTENSIONS – OPEN VERSION
Open fork extension
W1
L Q
CG3 H
W2
• Fork extension length should not exceed original fork

Max fork extension length = L + 50%
length by more than 50%
Fork length L • In conformity with ISO 13284
• Material thickness: 8 mm
• Supplied with locking and cotter pin
• Made in Europe
• Other sizes on request

W1 x T 1200 mm 1400 mm 1500 mm 1600 mm 1800 mm 2000 mm 2200 mm 2400 mm 2500 mm
mm
80 x 40 100MC9920 100MC9937 100MC9708 100MC9745 100MC9774 100MC9803 100MC9832 100MC9861 100MC9890
PINS FOR FORK EXTENSIONS INCLUDING CLEVIS PIN
mm
,50
mm)
Ø4
11 mm 10 mm
(Ø 20

Lock pin of Fork extension size to fit on fork section size
extensions versus
different fork
sections
A 150 mm 180 mm 200 mm 206 mm 230 mm 257 mm 265 mm 290 mm
Fork cross section 80 x 40 mm 100 x 40, 45, 120 x 50 mm 130 x 40, 50, 140 x 50 mm 170 x 50 mm 180 x 50, 60, 200 x 60, 70,
50 mm 125 x 40, 45, 60 mm 150 x 50, 60, 90 mm 80, 100 mm
50 mm 70 mm
REF lock + cotter pin 100MC9933 100MC9723 100MC9721 100MC9724 100MC9725 100MC9726 100MC9727 100MC9728
REF cotter pin 100MC9722 100MC9722 100MC9722 100MC9722 100MC9722 100MC9722 100MC9722 100MC9722
706
MASTS & BOOMS
Forks – fork protection

FORK HEEL PROTECTORS
• Used to prevent wear to the blade and the heel

• Fits neatly into the heel and prevents the forks from
dragging on the ground
• Simply and quickly fitted to the heel of the fork
• When worn, the protector can be turned over
For fork width REF

mm pair
100–105 100MC7321
120–125 100MC7322
150 100MC7323
200 100MC7324
Have a look at tvh.tv to see this product in

action.
FORK WEAR PADS
• 5 mm wear thickness (+ 1 mm adhesive) and 100 mm

length
• Stick firmly onto the bottom of the heel
Application:
• Thoroughly degrease and roughen up area where plate
has to be fixed
• Remove film from tape on the plate
• Stick the plate onto the prepared area in one go (do not
remove anymore)
• Apply pressure by using the forks’ own weight and do not
use for 24 hours
For fork width Wear pad REF

mm mm piece
100 75 100MC7317
125 100 100MC7318
150 125 100MC7319
200 175 100MC7320
No need for welding
707
Forks – load protection
MASTS & BOOMS
FORK TIPS
• Protects products, staff, pallets, racking, fixtures

• Enhance safety
• Considerably reduce product damage
• Easy‑to‑install
• Increase lifespan of pallets
• Cost‑effective warehouse protection
45 mm
• Decrease insurance claims
Kit contains:
• 1 pair of fork tips
• 1 pair of latex gloves
• 1 glue cartridge
• 1 spatula
• 1 degreasing spray
• Full fitting instructions
REF 100MC7325
708
MASTS & BOOMS

LOAD CUSHIONS
Load cushion Load cushion tie
• Protective barrier between the load and the forks

• Made from heavy‑duty moulded rubber
• Fits to the rear face of a forklift truck’s forks
• Absorbs the impact of an incoming load
• Quickly fitted using a simple yet robust strapping system
For fork width REF pair

mm
100–110 100MC7326
120–130 100MC7327
150–160 100MC7328
200 100MC7329
Have a look at tvh.tv to see this product in

action.
SHOCK ABSORBER
• 4 magnets (39 kg pull force)
• Material: copolymer 70° shore A
• Overall strength: > 13 MPa
• Elasticity: 300%
• Temperature range: −40 °C to 100 °C
• Weight: 1 kg
• Soft fibre top coat (to protect your load)
• Fits on the forks of various machines: lift trucks, reach
trucks, stackers …
REF 100MC7330 –– Dimensions: 400 x 50 x 50 mm

709
MASTS & BOOMS
PROTECTIVE FORK COVERS
Detail
Polyurethane
protective
cover
Steel fork
Fork
• Protect the load

• Prevent slipping
Height =
• Noise‑reducing
Width = • Absorb impact
Back
(to be measured at
the widest place)
• Very wear‑resistant
Fork mm
thickness =
mm
mm
Fork blade protection
Fork back protection
Blade Fork blade & back protection
Different sizes possible

Length = mm
Contact your sales advisor to order
the correct size for your fork.
710
MASTS & BOOMS

ANTI‑SCRATCH AND ANTI‑SKID DEVICES
Fork blade protector Fork
Rubber
Metal core
Magnetic layer

Application:
The anti‑scratch, anti‑slip magnetic fork blade covers can be used for handling a wide range of loads.
They can either be used where products could be damaged from contact with bare forks or when confronted with a slippery
load like cages or metal boxes.
Should not be used to handle wooden pallets!
Features:
• Only a few seconds are required for fitting or removal
• Attaches instantly when positioned on metal lifting forks, due to magnetisation
• Installation requires no mechanical or electrical work
• Sticks securely to forks
• Consists of a 70 shore black rubber upper layer, a metal inner core and a bottom magnetic layer
• The capacity of the forklift truck does not get limited in any way
• Delivered with user manual
• Can easily be stored on the side of the lift truck when not in use
Use with fork size Thickness Remark REF

Width Length Per pair
mm mm mm
Covers blade and back
80 1000–1300 9 With edge guard 100MC7331
80 1000–1190 9 100MC7332
80 1200–1390 9 100MC7333
100 1000–1190 9 100MC7334
100 1200–1390 9 100MC7335
120–130 1000–1190 9 100MC7336
120–130 1200–1390 9 100MC7337
150–200 1000–1190 11 100MC7338
150–200 1200–1390 11 100MC7339
Covers blade only
100 1400–1600 9 100MC7340
120–130 1400–1600 9 100MC7341
120–130 1700–2050 11 100MC7342
150–200 1400–1600 11 100MC7343
150–200 1700–2050 11 100MC7344
120–130 2200–2550 11 Provided in two pieces for extra long blades 100MC7345
150–200 2200–2550 11 Provided in two pieces for extra long blades 100MC7346
Have a look at tvh.tv to see this product in action.
711
Fork level indicators
MASTS & BOOMS
ACCU‑TILT FORK LEVEL INDICATOR
8 mm*
41 mm*
177 mm*
56 mm*
*
m
6m
28
147 mm*
106 mm*
*
m
2 m
14
*required space
An incorrect tilt angle of the forks is the leading cause Features:

of both racking and product damage. Even the most • Reduces product damage
experienced operator has difficulty judging the tilt of the • Reduces rack damage
forks when he is entering pallets high on the rack. The • Reduces pallet damage
Accu‑Tilt shows the operator the level of the forks at • Increases productivity
all times thereby reducing potential damage caused by • Installs in less than one minute
piercing products or racking and increasing productivity by
eliminating the guesswork. REF 100MC9903
Additionally, the Accu‑Tilt will also indicate to the operator
the correct angle to travel with a load as well to park the lift
truck.
FLAT FORK LEVEL INDICATOR
Digital fork level indicator

Features: Specifications:
• Consistently shows whether or not a load is truly • Dimensions (L x W x H): 73 x 57,1 x 158,7 mm
horizontal • Weight (with batteries): 0,734 kg
• Red/yellow/green lights for fast recognition • Power source: 2 standard “D” alkaline batteries
• Makes work faster and easier • Housing: rugged ABS box, stainless steel fasteners,
• Reduces load, pallet and rack damage nickel‑coated rare‑earth magnets, lean labels
• Improves safety by reducing operator mistakes
REF 101MC3763
712
MASTS & BOOMS
Fork camera set

FORK CAMERA SET
Included:
Wireless fork camera with 7” monitor
• 7” monitor
With a 7” budget monitor and the wireless fork camera, this kit is an ideal
• 10–15 hours battery pack basis if you want to use the wireless fork camera.
• Wi‑Fi system Features:

• Battery charger • 7” budget monitor
• With top quality Sony CCD sensor
• Fork camera • Focus point set on the tip of your fork
REF 100MC7350
Recommended optional items:
Glue
80 ml
REF 100MC7351
Battery pack
REF 100MC7353
IR Wide angle
10m lens
Cleaner 7063
150 ml
7”
Vibration
REF 101MC3802
713
Forks
MASTS & BOOMS
MAGPROTECT
MagProtect
re‑usable safety corner
The MagProtect is a re‑usable safety corner with a powerful custom‑made magnet.
The use of the MagProtect will drastically decrease the risk of industrial accidents. The advantages:
• Safety in the
High‑quality magnets ensure the corner protector will always stay in place. This way workplace
hazardous situations belong to the past. • Clear marking
The MagProtect can easily be attached to and removed from any metal construction. • Cost‑effective
• Durable materials
• # of magnets: 1 • Magnet type: neodymium pot magnet • Easy to (dis)
• Non‑magnet sides: flat • Material: CP284R heterophasic copolymer assemble
• Weight: 254 g • Standard color: traffic orange • Applicable to steel
• Dimensions: 150 x 150 mm • Special options: other colours and (via magnet) and
• Working temperature: from −20 °C (−4 °F) glow‑in‑the‑dark, imprint of your company wood* (via nails or
up to 80 °C (176 °F) name or logo screws)
• Stackable
REF 100MC9541 –– Pull force: 25 kg (therefore
–– Colour: orange spacesaving)
REF 100MC3451 –– Pull force: 65 kg
–– Colour: red‑white reflecting * On request
714
MASTS & BOOMS
Consumables – accessories
WHITE LITHIUM GREASE
• Sprays like an oil and sets like a grease

• Provides long‑lasting lubrication
• Excellent water resistance
• Content: 400 ml
REF 100MC5072
FOOD GREASE
• Multipurpose grease with long‑term lubrication on food

processing equipment, where incidental food contact may
occur
• Can be applied to all metal constructions used in the food
industry: hinges, valves, chains, gears, joints …
• Registered NSF H1 for use in the food industry
• Exceptional mechanical stabillity
• Complies with BRC Global standard – 4.7.6
• Resists steam
• Prevents corrosion
• Content: 500 ml
REF 100MC9540
TRAFFIC SIGN FOR FORKS
• Dimensions (L x W x H): 800 x 100 x 150 mm

• Improves traffic safety on‑site and on the road
• Weather‑resistant
• Red/white
• Made of foam
REF 101MC3766
715
Notes
MASTS & BOOMS
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
................................................................................................................................................................
716

05 MastsBooms

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

05 MastsBooms

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

05 MastsBooms

Uploaded by

Copyright:

Available Formats

MASTS

SPARE PARTS FOR SIDESHIFTER ATIB 108.25

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER ATIB 109.25

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER BOLZONI

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER CAM ATTACHMENTS

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity REF

SPARE PARTS FOR SIDESHIFTER CAM ATTACHMENTS

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER CAM ATTACHMENTS

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER CASCADE

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER CASCADE

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Type: 65D33801, 65D33802, 65D33803, 65D33804, 65D33805, 65D33806, 65D33807, 65D33808

Fig Description Quantity Remarks REF

SPARE PARTS FOR SIDESHIFTER CASCADE

Fig Description Quantity Remarks REF

Spare parts for sideshifters

Fig Description Quantity Remarks REF