Hyundai L2000sy L3000sy Turningcenter

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.
com
L-SY Series
HYUNDAI WIA Multi-Tasking Y-Axis CNC Turning Center
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Technical Leader
The CNC Turning Center L-SY Series, designed with HYUNDAI WIA's engineering expertise to maximize productivity by
enhancing rigidity and accuracy of machining.
Main Chuck Sub Chuck Bed

ITEM
8″ 10″ 12″ 6″ Short Standard Long
L2000Y ● ●
L2000SY ● ● ●
L2000LY ● ●
L2000LSY ● ● ●
L2600Y ● ●
L2600SY ● ● ●
L2600LY ● ●
L3000Y ● ●
L3000SY ● ● ●
L3000LY ● ●

Y-Axis with Box Guideways Lathe for

Heavy-Duty Cutting
L-SY Series
● Cycle time reducing structure for maximum productivity
● Multi-tasking operation with wedge type Y-axis BMT65P turret
● Integrated processing through synchronized control of
Main/Sub spindle
● High performance heavy duty cutting enabled with box guideways
● Main/Sub Built-in Spindle application for high precision processing

01
L-SY Series
Basic Structure
Covers All Machining Process
with Only One Initial Setting
01
30° Slant Type Bed

The one-piece 30° slant bed design is based on FEM analysis which provides improvement
in vibration absorption and machining stability during heavy duty cutting.
02 03
Box Guideway Main Built-In Spindle
All axis of L-SY Series are designed with Box Guideways Heat produced by the main spindle is blocked by
for better travel ability. Box Guideways show great applying a symmetric one-piece base and an
performance in offsetting vibrations caused by heavy insulation plate. This enables maintaining high
duty cutting. accuracy even during a long period of machining.
04 05
BMT Turret (BMT65P) 6″ Sub Spindle (“S” Type)
The BMT holder is firmly fixed with 4 screws keeping it in
The sub spindle is equipped with built-in motor and
place during heavy operations, especially during milling,
headstock cooling device as standard to minimize thermal
drilling, and tapping.
displacement.
Also, the use of use of a sub spindle reduces setup time,
improving productivity.

Basic Structure
MACHINE TOOL
HYUNDAI WIA
Y-Axis Turning Center
04
L-SY Series
05
03
04
02 +
05
01
Reduction of Non-Cutting Time

◉ Travel (X/Y/Z/ZB)
L2000Y/SY : 265/120{±60}/590/590 mm (10.4″/4.7″{±2.4″}/23.2″/23.2″)
L2000LY/LSY, L2600Y/SY, L3000Y/SY : 265/120{±60}/830/830 mm (10.4″/4.7″{±2.4″}/32.7″/32.7″)
L2600LY, L3000LY : 265/120{±60}/1,350 mm (10.4″/4.7″{±2.4″}/53.1″)
◉ Rapid Traverse Rate (X/Y/Z/ZB) : 30/10/30/30 m/min (1,181/294/1,181/1,181 ipm)

02
L-SY Series
Built-in Spindle
Long Lasting High Accuracy & Excellent Performance
CNC Turning Center
0.001° Built-In Main Spindle

Built-in type spindle reduces noise, heat and vibration effectively at
high speed rates. Also, rapid acc./deceleration reduces non-cutting
time leading to higher productivity.
C-Axis Control
C-axis control of main and sub spindle allows machining of various
products with the use of live tools on the Y-axis.
Built-In Sub Spindle

The "S" Type built-in sub-spindle has 6" sub-chuck, which enlarges the
machining area and improves the workability of the sub spindle with the
C-axis control.
0.001°
◉ Bar Capacity : Ø51 (Ø2″)

Powe
Spindle 5.5
[7.4]
Powe
35.3
5.5
[7.4]
3.7
[5] 35.3
23.6
3.7
[5]
23.6
MACHINE TOOL
HYUNDAI WIA
0
L2000 Built-in Main Spindle L2600 Built-in Main Spindle 0
Power (kW[HP]) Torque (N·m[lbf·ft]) Power (kW[HP]) Torque (N·m[lbf·ft]) Powe
358N·m[264lbf·ft] (S3 15%) 22kW[29.5HP] (S3 15%)

22 358
Power (kW[HP]) Torque (N·m[lbf·ft]) [264] 599N.(kW[HP])
Power m [441.8[lbf·ft]] (S3 25%) Torque (N·m[lbf·ft]) Powe
[29.5] 22kW[29.5HP] 599
301N·m[222lbf·ft] (S3 25%)18.5kW[24.8HP] (S3 25%) 22 7.5
18.5 18.5kW[24.8HP] (S3 25%, S2 30min) [441.8]

301 [29.5] [10]
[24.8] 358N·m[264lbf·ft] (S3 15%) 22kW[29.5HP] (S3 15%) [222]
18.5
(S3 25%) 5.5
22 15kW[20.1HP] (S3 30min) 358 [24.8]
15 231N·m[170.4lbf·ft] (S3 30min) [264] 599N .m [441.8[lbf·ft]]
409N·m[301.7lbf·ft] (S1(S3 25%)
Cont.) 15kW[20.1HP]
[7.4]
[29.5]
[20.1] 214N·m[157.8lbf·ft] (S1 Cont.)
231[170.4] 22kW[29.5HP] 599 N
301N·m[222lbf·ft] (S3 25%)18.5kW[24.8HP] (S3 25%) 15 (S1 S2
Cont.) 409
L-SY Series
22
11kW[14.8HP] (S1 Cont.) 214[157.8] 18.5kW[24.8HP] (S3 25%, 30min) [441.8]
7.5 .5
95
18.5 [20.1]
[29.5] [301.7]
11
[24.8]
301
18.5 323N·m[238.2lbf·ft] (S3 25%) [10]
15kW[20.1HP] (S3 30min) [222] (S3 25%) 323[238.2] 5.5
[14.8]
231N·m[170.4lbf·ft] (S3 30min) 140 [24.8] 259N·m[191lbf·ft] (S2 30min) [7.4] .
15
231[170.4]
118
409N·m[301.7lbf·ft] (S1
205N·m[151.2lbf·ft] (S1 Cont.)
Cont.) 15kW[20.1HP] 259[191] 47
[20.1] 214N·m[157.8lbf·ft] (S1 Cont.) 15 (S1 Cont.) 409
205[151.2] 1.5 5N
11kW[14.8HP] (S1 Cont.) 214[157.8]
95.5 .
11 70
[20.1]
323N·m[238.2lbf·ft] (S3 25%) [301.7] [2] 95 N
323[238.2] .7
259N·m[191lbf·ft] (S2 30min) 33 7.
[14.8] 53
140 259[191]
475 4,000 44
118 205N·m[151.2lbf·ft] (S1 Cont.)
650 810 4
205[151.2] 1.5
95.5 [2]
0 400 490 620 1,500 5,000 0 300 350 700 4,000 0
70 N
Spindle Speed (r/min) Spindle Speed (r/min) .7
53 33
475 4,000 44 650 810
0 400 490 620 1,500 5,000 0 300 350 700 4,000 0
06
Power (kW[HP])Spindle Speed (r/min)
Torque (N·m[lbf·ft]) Power (kW[HP])Spindle Speed (r/min)
Torque (N·m[lbf·ft]) +
L3000 Built-in Main Spindle Built-in Sub Spindle 07
37kW[49.6HP] (S2 30min) 135N·m[99.6lbf·ft] (30min)
37 15kW[20.1HP] (30min) 135
[49.6] Power (kW[HP])
1,262N·m[930.8lbf·ft] (S2 30min) Torque (N·m[lbf·ft]) 15
[20.1]
Power (kW[HP]) Torque (N·m[lbf·ft]) [99.6]
1,262
37kW[49.6HP] (S2 30min) (Cont.)

[930.8] 99.1N·m[73.1lbf·ft] (S1 Cont.)
135N·m[99.6lbf·ft] (30min)
37
1,003N·m[739.8lbf·ft] (Cont.) 25kW[33.5HP] 15kW[20.1HP] (30min) 99.1
135
25 1,003 [73.1]
15
[49.6]
[33.5] 1,262N·m[930.8lbf·ft] (S2 30min) [739.8]
[20.1] 11kW[14.8HP] (Cont.) [99.6]
18.5 1,262 11 57.3N·m[42.3lbf·ft] (30min)
[24.8] 707N·m[521.5lbf·ft] (S2 30min) [930.8] [14.8] 99.1N·m[73.1lbf·ft] (S1 Cont.) 57.3
707
15 1,003N·m[739.8lbf·ft] (Cont.) 25kW[33.5HP] (Cont.) [521.5] 42N·m[31lbf·ft] (S1 Cont.) 99.1
[42.3]
25
[20.1] 1,003 [73.1]
42
477N·m[351.8lbf·ft] (Cont.) [739.8] 11kW[14.8HP] (Cont.)
[33.5] 477 [31]
18.5
[351.8] 11 57.3N·m[42.3lbf·ft] (30min)
[24.8] 707N·m[521.5lbf·ft] (S2 30min) [14.8] 57.3
707
15 42N·m[31lbf·ft] (S1 Cont.) [42.3]
[521.5]
[20.1] 477N·m[351.8lbf·ft] (Cont.) 42
1,400 477 [31]
[351.8]
0 238 280 500 1,600 3,000 0 1,060 2,000 2,500 6,000
Spindle Speed (r/min) Spindle Speed (r/min)
1,400
0 238 280 500 1,600 3,000 0 1,060 2,000 2,500 6,000
L2000 : 5,000rpm (Built-in) L2600 : 4,000rpm (Built-in) L3000 : 3,000rpm (Built-in) Sub Sp. : 6,000rpm (Built-in)
22 kW (29.5 HP)
Max. Output 22 kW (29.5 HP) 37 kW (49.6 HP)
Max. Output 15 kW (20.1 HP) Max. Output Max. Output
358 N・m (264 lbf・ft) 599 N・m (441.8 lbf・ft) 1,262 N・m (930.8 lbf・ft) 135 N・m (99.6 lbf・ft)
Max. Torque Max. Torque Max. Torque Max. Torque

03
L-SY Series
Belt Type Spindle
Long Lasting, High Accuracy & Excellent Performance
CNC Turning Center
Belt Type Main Spindle

Belt type main spindle has a wide torque range and it is designed to
minimize thermal displacement. This enables accurate machining during
high speed constant processing.
0.001° C-Axis Control

C-axis control of main and sub spindle allows machining of various
products with the use of live tools on the Y-axis.
Belt Type Sub Spindle

The belt-type sub spindle with 6" chuck is designed to minimize thermal
displacement during long duration continuous machining and from
heavy-duty cutting to high-speed processing.
◉ Bar Capacity : Ø51 (Ø2″)

Spindle
MACHINE TOOL
HYUNDAI WIA
L2000 Belt Main Spindle L2600 Belt Main Spindle
Power (kW[HP]) Torque (N·m[lbf·ft]) Power (kW[HP]) Torque (N·m[lbf·ft])
26kW[34.9HP] (S3 25%.)

26[34.9] 733.7N·m[841.1lbf·ft] (S3 25%)
18.5kW[24.8HP] (S3 25%) 733.7
18.5
314.2N.m[231.7lbf·ft] (S3 25%) [541.1]
[24.8]
314.2 22 620.8N·m[457.9lbf·ft] (S2 30Min.)22kW[29.5HP] (S2 30Min.)
15kW[20.1HP] (S3 60%) [29.5] 620.8
[231.7] 18.5kW[24.8HP] (S1 Cont.) [457.9]
15
254.2N·m[187.5lbf·ft] (S3 60%) 18.5 522.1N·m[385.1lbf·ft] (S1 Cont.)

[20.1] [24.8] 522.1
254.2 [385.1]
11kW[14.8HP] (S1 Cont.) [187.5]
11 186.2N·m[137.3lbf·ft] (S1 Cont.)
186.2
L-SY Series
[14.8]
[137.3]
39.2[28.9]
31.8[23.5] 29[21.4]
23.3[17.2] 24[17.7]
0 562.5 4,500 0 338 1,768 2,029 3,500
L3000 Belt Main Spindle Belt Sub Spindle 08

Power (kW[HP]) Torque (N·m[lbf·ft]) Power (kW[HP]) Torque (N·m[lbf·ft]) +
09
1,123N·m[828.3lbf·ft] (S2 15min)
26kW[34.9HP] (S3 25%) 1,123 124N·m[91.5lbf·ft] (S3 25%)
26 [828.3] 11kW[14.8HP] (S3 25%) 124
[34.9] 923N·m[680.8lbf·ft] (S3 25%) 11 [91.5]
22kW[29.5HP] (S2 15min) 923
[14.8]
22[29.5] [680.8]
782N·m[576.8lbf·ft] (S2 30min) 18.5kW[24.8HP] (S1 Cont.)
782[576.8] 84.7N·m[62.5lbf·ft] (S2 30 min, S3 60%)
18.5[24.8] 664N.m[489.7lbf·ft] (S1 Cont.) 664[489.7] 84.7
7.5kW[10HP] (S2 30min, S3 60%)
657N.m[484.6lbf·ft] (S1 Cont.) 657[484.6] 7.5 62.1N·m[45.8lbf·ft] (Cont.)
[62.5]
13 [10] 5.5kW[7.4HP] (Cont.) 62.1

[17.4] 13kW[17.4HP] (S1 Cont.) 5.5 [45.8]
[7.4]
15.9[11.7]
187 11.7[8.6]
0 269 467 700 1,402 2,800 0 845 2,535.2 4,500

L2000 : 4,500rpm (Belt) L2600 : 3,500rpm (Belt) L3000 : 2,800rpm (Belt) Sub : 4,500rpm (Belt)
18.5 kW (24.8 HP) 26 kW (34.9 HP)

Max. Output 26 kW (34.9 HP)
Max. Output 11 kW (14.8 HP) Max. Output Max. Output
314.2 N・m (231.7 lbf・ft) 733.7 N・m (541.1lbf・ft) 1,123 N・m (828.3 lbf・ft) 124 N・m (91.5 lbf・ft)
Max. Torque Max. Torque Max. Torque Max. Torque

04
L-SY Series
Y-Axis Function
High speed, High Accuracy, Highly Reliable
BMT Turret
Wedge Type Y-axis Structure

The L2000SY/2600SY/3000SY is designed with a wedge type Y-axis that is transferred by the simultaneous operation of
the Ys-axis and the X-axis. In addtion, excellent rigidity makes possible to perform superb quality when machining a
heavy-duty cutting.
Ys
-A
x
is
Y-Axis
Travel
X-
Ax
is

Turret
Mill Turret (BMT65P)
MACHINE TOOL
HYUNDAI WIA
Straight Milling Head Angular Milling Head
The BMT turret secures the tool with four bolts and key on the tool
mounting surface of the turret, making it possible to powerfully fix
the tool, ensuring high reliability in rigidity and precision.

Mill Tool Holder
L-SY Series
Machining capability has increased with the addition
of straight milling head tool holder, which can
machine workpieces from the side, and angular
milling head tool holder, which can perform I.D.
operations.
10
+
11
Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])
5kW[20.1HP] (30min) 7.5kW[10HP] (30min) 5.5kW[7.4HP] (15min, S3 25%)

7.5 5.5
(30min) [10] [7.4]
254.2
35.3N∙m[26lbf∙ft] (15min, S3 25%)
1kW[14.8HP] (Cont.) [187.5]
59.7N∙m[44lbf∙ft] (30min) 35.3
59.7 [26]
[44] 3.7kW[5HP] (Cont.)
(Cont.) 5.5kW[7.4HP] (Cont.) 3.7
186.4 5.5 [5]
[137.5] [7.4] 23.6N∙m[17.4lbf∙ft] (Cont.)
23.6
43.8N∙m[32.3lbf∙ft] (Cont.) [17.4]
43.8[32.3]
12[8.9]
8.7[6.4]
4,500 0 1,200 6,000 0 1,400 1,500 5,000
Speed (r/min) Spindle Speed (r/min) Spindle Speed (r/min)
Mill Spindle
Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])
700N∙m[516.3lbf∙ft] (S3 25%)

S3 25%) 700
.5HP] (S3 25%, S2 30min) ◉ Output(Max./Cont.)
599
: 5.5/1.5(S3
22kW[25.9HP] (7.4
kW25%, /2 HP)[516.3]
S2 30min)
∙ft
] 7.5kW[10HP] (5min)
22 7.5[10] f
HP] (S3 25%) [441.8] [25.9] 539N∙m[397.5lbf∙ft] (S2 30min) 4 lb 5.5kW[7.4HP] (S3 25%)
S1 Cont.)
kW[20.1HP] (S1 Cont.)
◉ Speed : 5,000 r/min 15kW[20.1HP] (S1 Cont.)
539
[397.5]
5.5
[7.4]
m
[7
0.
bf
∙f t]
409 15
398N∙m[293.5lbf∙ft] (S1 Cont.) N∙ 4.
7l
t]
398[293.5] .5
S3 25%) ◉ Collet size : Ø25 (Ø1″) (ER40)
[301.7]
323[238.2]
[20.1] 323N∙m[238.2lbf∙ft] (S2 30min) 95
m
[3
9l
b f∙f
N∙
323[238.2]
2 30min)
.1 4.
259[191] 220N∙m[162.3lbf∙ft] (S1 Cont.) [2 1.5kW[2HP] (S1)
S1 Cont.) 47
◉ Live Tool Type : BMT65P
205[151.2] 220[162.3] 1.5 m
N∙
[2] .7
33
650 810
◉ Indexing Time : 0.15360sec/step 1,115
700 4,000 0 300 390 650 4,000 0 567 750 3,000 5,000
Speed (r/min) Spindle Speed (r/min) Spindle Speed (r/min)
Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])

0min) 208N∙m[153.4lbf∙ft] (S3 40%)
15kW[20.1HP] (30min) 135 15kW[20.1HP] (S3 40%, S2 30min) 208
05
L-SY Series
Special Tool Holders
Various Driven Precision Tool Holders for
CNC Turning Centers

Tool Holder
Tooling System
With the Y-axis, the L-SY series can process high value-added products using a
variety of rotating tools. In particular, there is a multi-holder for attaching a variety of
tools to one holder, and an eccentric rotary tool for handling eccentric parts without
MACHINE TOOL
additional axis travel, which can realize integration of process with one machine.
HYUNDAI WIA
Straight Type
Swivel Head

O.D Tool Driven
L-SY Series
Offset Type
Gear Hobbing
12
+
13
Angular Type Double Type

Y axis
Multiple Tool Driven
Face Tool Driven
Offset Type Both Sides Type
Both Sides Type 2-Spindle Type

Y axis
❖ Consultation needed when ordering these options.

06
L-SY Series
Smart System
Software for Smart Operating
and Machining
Faster processing and enhanced accuracy in are possible through the

HYUNDAI WIA Smart System. The user friendly software and equipment monitoring
of the Smart System maximizes productivity.
HW-TM
M
e lligent achining
Int
ing
Ener
Monitor
HW-MMS
HW-ESS
User Friendly
gy Saving
chine
Ma
Use
r C o nve n i e n c e
HW C G
-eDNC
| H W-M
USB Port (Standard)

Convenience is increased when inputting and outputting program.
The USB port is available in addition to the former input output
methods such as CF memort card and LAN.

HYUNDAI WIA Smart System
MACHINE TOOL
HYUNDAI WIA
Smart Factory HW-MMS (HYUNDAI WIA-Machine Monitoring System)

A brand new manufacturing machine by HYUNDAI WIA, HW-MMS is a unique software capable of monitoring the operation
status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.
L-SY Series
01 03 05
01 Real-time monitoring of machine operation status (Cloud)
02 History and statistics of machine operation (Cloud)
03 History and statistics of alarm occurrence (Cloud)
02 04 HW-MMS
04 History and statistics of work count (Cloud)
Remote
14
System 05 Remote diagnosis (Remote) +
15
HW-eDNC HW-MCG
HYUNDAI WIA ethernet HYUNDAI WIA
Direct Numerical Control Machine Guidance
This software allows transmition of NC data between PC and a Software that offers operation, maintenance, management
machine's CNC. The processing programs can be managed on monitoring and various user friendly features.
the PC through the ethernet or serial communication.
HW-TM HW-ESS (Standard)

HYUNDAI WIA HYUNDAI WIA
Tool Monitoring Energy Saving System
A tool monitoring software which analyzes the load of the An environmental friendly software that reduces the
spindle motor to determine and monitor possible damage of unnecessarily wasted standby power waiting for an operation.
tools.

07
L-SY Series
Automatic Q-Setter
User Convenience
Various Devices for User Friendly
Tail Stock
•The large (MT#5) tail stock ensures high accuracy

during heavy duty cutting.
•The quill movement can be controlled by foot pedal or
program.
•The body can be moved by connecting to the saddle and
using the JOG button or MPG.
Type : Quill Quill Travel : 120mm (4.7″)

Quill Dia. : Ø100 (3.9″)
Quick and accurate tool calibration can be done by contacting the

tool tip with the sensor. This process is done easily with the use
of M-Code and the calibration process takes roughly 30 seconds.
Precision Device
Linear Scale
Linear scale and rotary scale help process highly accurate
products through precise locating.
NC Tail Stock
NC tail stock can be moved separately, providing convenience during
workpiece setup.
Programmable + Live Center (MT#5) + Quill Std.

Programmable + Dead Center (MT#4) + Quill Opt.
NC Feed + Live Center (MT#5) Opt.
NC Feed + Dead Center (MT#4) Opt.

Optional
MACHINE TOOL
HYUNDAI WIA
Bar Feeder System
Bar Feeder
Bar feeder system enables automation which leads to efficiency improvement.

Long Type 3 m (118.1″)
Max Bar Capacity Ø42 mm (1.7″)
Short Type 1.5 m (59.1″)
L-SY Series
Max Bar Capacity Ø65 mm (2.6″)
16
+
17
Steel Round Bar material Bar Feeder Process Machining Process
Bar Feeder Machining Parts Catcher Parts Conveyor

Specifications
Standard & Optional ● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Spindle L2000Y/LY L2000SY/LSY Safety Device

Main Spindle Total Splash Guard ● ●
8″ ● ●
Hollow Chuck 3 Jaw Chuck hydraulic pressure maintenance interlock ○(CE:●) ○(CE:●)
Main Spindle Electric Device
8″ ☆ ☆
Solid Chuck 3 Jaw Call Light 1Color : ■ ● ●
Sub Spindle Call Light 2Color : ■■ ○ ○
6″ - ●
Hollow Chuck 3 Jaw Call Light 3Color : ■■■ ○ ○
Sub Spindle Call Light & Buzzer 3Color : ■■■B ○ ○
6″ - ☆
Solid Chuck 3 Jaw Electric Cabinet Light ○ ○
Standard Soft Jaw (1set) ● ● Remote MPG - -
Chuck Clamp Foot Switch ● ● Work Counter Digital ○ ○
2 Steps Hyd, Pressure Device ○ ○ Total Counter Digital ○ ○
Spindle Inside Stopper ☆ ☆ Tool Counter Digital ○ ○
5° Index ☆ ☆ Multi Tool Counter Digital ○ ○
Cs-Axis (0.001°) ● ● Electric Circuit Breaker ○ ○
2 Steps Chuck Foot Switch ○ ○ AVR (Auto Voltage Regulator) ☆ ☆
Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●) 40kVA ○ -
Transformer
Sub Spindle Foot Switch - ● 60kVA - ○
Turret Auto Power Off ○ ○
Tool Holder ● ● Measurement
Mill Turret BMT ● ● Q-Setter - -
Straight Milling Head (Radial) Collet Type,2ea ● ● Automatic Q-Setter ● ●
Angular Milling Head (Axial) Collet Type,2ea ● ● Work Close Confirmation Device TACO ○ ○
Straight Milling Head (Radial) Adapter Type ○ ○ (Only for Special Chuck) SMC ○ ○
Angular Milling Head (Axial) Adapter Type ○ ○ Work Setter ☆ ☆
Boring Sleeve ● ● X axis ☆ ☆
Linear Scale
Drill Socket ● ● Z axis ☆ ☆
U-Drill Holder ○ ○ Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆
U-Drill Holder Sleeve ○ ○ Environment
O.D Extension Holder For Out-Dia ☆ ☆ Air Conditioner ○ ○
Swivel Head ☆ ☆ Oil Mist Collector ○ ○
Tail Stock & Steady Rest Oil Skimmer (Only for Chip Conveyor) ○ ○
Programmable + Live Center (MT#5) + Quill ● - MQL (Minimal Quantity Lubrication) ☆ ☆
Programmable + Dead Center (MT#4) + Quill ○ - Fixture & Automation
NC Feed + Live Center (MT#5) ○ - Auto Door High Speed ○ ○
NC Feed + Dead Center (MT#4) ○ - Auto Shutter (Only for Automatic System) ☆ ☆
수동유압 방진구 (SMW/Khan/Shinkang/Samchully) ☆ ☆ Sub Operation Pannel ☆ ☆
Programable Hyd. Steady Rest - - Bar Feeder Interface ○ ○
Standard Live Center ● - Bar Feeder (FEDEK) ☆ ☆
High Precesion Live Center ○ - Sub Sp. Work Eject (Pneumatic Type) - ○
2 Steps Tail Stock Pressure System ☆ - Sub Sp. Work Pusher (Spring Type) - ○
Tail Stock Foot Switch (When Tail Stock is selected) ● - Turret Work Pusher (For Automation) ☆ ☆
Quill Forward/Reverse Confirmation Device ☆ - Extra M-Code 4ea ○ ○
Coolant & Air Blow Automation Interface ☆ ☆
Standard Coolant (Nozzle) ● ● 16 Contact ○ ○
I/O Extension (IN & OUT)
Chuck Coolant (Upper Chuck) ○ ○ 32 Contact ○ ○
Gun Coolant ○ ○ Main SP. ○ ○
Parts Catcher
Through Spindle Coolant (Only for Special Chuck) ☆ ☆ Sub SP. - ○
Turnmill Through Coolant - - Parts Conveyor(Need to Main Part Catcher) ☆ ☆
Chuck Air Blow (Upper Chuck) ○ ○ Front Loading Semi Automation ☆ ☆
Sub Spindle Air Blow - ○ Hyd. Device
Tail Stock Air Blow (Upper Tail Stock) ☆ - Standard Hyd. Cylinder Hollow ● ●
Turret Air Blow ☆ ☆ 35bar(507.6psi) /
Standard Hyd. Unit ● ●
Air Gun ○ ○ 14ℓ(3.7gal)
Through Spindle Air Blow (Only for Special Chuck) ☆ ☆ S/W
6Bar (87psi) ● ● Machine Guidance (HW-MCG) ☆ ☆
High Pressure Coolant 20Bar (290psi) ○ ○ Energy Saving System (HW-ESS) ● ●
70Bar (1,015psi) ○ ○ Tool Monitoring (HW-TM) ○ ○
Power Coolant System (For Automation) ☆ ☆ DNC software (HW-eDNC) ○ ○
Coolant Chiller Machine Monitoring System (HW-MMS) ☆ ☆
☆ ☆
(When selecting Sub Tank Type, Chip Conveyor) Conversational program (HW-DPRO) - -
Chip Disposal ETC
275ℓ(72.6 gal) ●/- ●/- Tool Box ● ●
Coolant Tank
290ℓ(76.6 gal) -/● -/● Customized Color Need Munsel No. ☆ ☆
Chip Conveyor Front (Right) ○ ○ CAD & CAM ☆ ☆
(Hinge/Scraper) Rear (Rear) ○ ○
Special Chip Conveyor (Drum Filter) ☆ ☆
Standard
○ ○
(180ℓ[47.5 gal])
Swing
○ ○
(200ℓ[52.8 gal])
Chip Wagon Large Swing
○ ○
(290ℓ[76.6 gal])
Large Size
○ ○
(330ℓ[87.2 gal])
Customized ☆ ☆
Specifications are subject to change without notice for improvement.

Specifications
Spindle L2600Y/LY L2600SY Safety Device L2600Y/LY L2600SY

10″ ● ●
10″ ☆ ☆
MACHINE TOOL
HYUNDAI WIA
6″ - ●
6″ - ☆
Transformer

L-SY Series
Linear Scale
NC Feed + Live Center (MT#5) ○ - Auto Door High Speed ○ ○ 18
NC Feed + Dead Center (MT#4) ○ - Auto Shutter (Only for Automatic System) ☆ ☆ +
수동유압 방진구 (SMW/Khan/Shinkang/Samchully) ☆ ☆ Sub Operation Pannel ☆ ☆ 19
Parts Catcher
☆ ☆
Chip Disposal ETC
290ℓ(76.6 gal) ●/- ● Tool Box ● ●
Coolant Tank
320ℓ(84.5 gal) -/● - Customized Color Need Munsel No. ☆ ☆
Standard
○ ○
(180ℓ[47.5 gal])
Swing
○ ○
(200ℓ[52.8 gal])
○ ○
(290ℓ[76.6 gal])
Large Size
○ ○
(330ℓ[87.2 gal])
Customized ☆ ☆

Specifications
Spindle L3000Y/LY L3000SY Safety Device L3000Y/LY L3000SY

12″ ● ●
12″ ☆ ☆
6″ - ●
6″ - ☆
Transformer
Linear Scale
NC Feed + Live Center (MT#5) ○ - Auto Door High Speed ○ ○
NC Feed + Dead Center (MT#4) ○ - Auto Shutter (Only for Automatic System) ☆ ☆
수동유압 방진구 (SMW/Khan/Shinkang/Samchully) ☆ ☆ Sub Operation Pannel ☆ ☆
Parts Catcher
☆ ☆
칩처리 ETC
290ℓ(76.6 gal) ●/- ● Tool Box ● ●
Coolant Tank
320ℓ(84.5 gal) -/● - Customized Color Need Munsel No. ☆ ☆
Standard
○ ○
(180ℓ[47.5 gal])
Swing
○ ○
(200ℓ[52.8 gal])
○ ○
(290ℓ[76.6 gal])
Large Size
○ ○
(330ℓ[87.2 gal])
Customized ☆ ☆

Specifications
External Dimensions unit : mm(in)
MACHINE TOOL
³$´
HYUNDAI WIA

³%´ ³&´ ³'´
'22523(167


L-SY Series

³(´

³)´

20
+
21

L2000LSY / L2000LY / L2600SY L2600LY / L3000LY

ITEM L2000SY/L2000Y
L2600Y / L3000SY / L3000Y (2 DOOR TYPE)
“A” 2,974 (117.1″) 3,304 (130.1″) 4,074 (160.4″)
“B” 690 (27.2″) 860 (33.9)″ 841 (33.1″)-Left / 651 (25.6″)-Right
“C” 847 (33.3″) 987 (38.9″) 987 (38.9″)
“D” 1,030 (40.6″) 1,070 (42.1″) 663 (26.1″)
“E” 3,280 (129.1″) 3,600 (141.7″) 4,315 (169.9″)
“F” 4,229 (166.5″) 4,549 (179.1″) 5,315 (209.3″)

Specifications
Tooling System unit : mm(in)
L2600Y/SY
U-Drill Cap I.D Holder Drill Socket Drill
Tap
Adapter
SET Boring Bar
Angular Mill Double
Holder I.D Holder Socket Boring Bar
End Mill
Milling Collet
ER32 Straight Mill O.D Holder
Holder
Center Drill
Double
O.D Holder O.D Tool
Double
O.D Holder
Drill
(24 POSITION INDEX)

Cutting Holder
Triple
I.D Holder
24P. INDEX
Reamer
& OPTION
Facing Holder Face Tool
Tooling Parts Detail

Y Type (12P) SY Type (12P) SY Type (24P : Opt.)
ITEM
mm Unit inch Unit mm Unit inch Unit mm Unit inch Unit
Single 4 4 2 2 1 1
O.D Holder
Double - - 1 1 3 3
Turning Holder
Facing Holder 1 1 1 1 1 1
Cutting Holder - - 1 1 1 1
Single 3 3 2 2 1 1
I.D Holder Double - - 1 1 - -
Boring Holder
Triple - - - - 1 1
U-Drill Holder Cap 1 1 1 1 1 1
Straight Mill Holder Standard 2 2 2 2 2 2
Driven Holder
Angular Mill Holder Standard 2 2 2 2 2 2
Ø16 (Ø3/4″) 1 1 1 1 1 1
Ø20 (Ø1″) 1 1 1 1 1 1
Boring
Ø25 (Ø1 1/4″) 1 1 1 1 1 1
(Single I.D)
Ø32 (Ø1 5/8″) 1 1 1 1 1 1
Ø40 (Ø1 3/4″) 1 1 1 1 1 1
Ø10 (Ø3/8″) - - 1 1 1 1
Socket Boring Ø12 (Ø1/2″) - - 1 1 1 1

(Double/Triple I.D) Ø16 (Ø5/8″) - - 1 1 1 1
Ø20 (Ø3/4″) - - 1 1 1 1
MT 2 1 1 1 1 1 1
Drill MT 3 1 1 1 1 1 1
MT 4 1 1 1 1 1 1
ER Collet 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set
Adapter Set 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set

Specifications
Interference unit : mm(in)
2
Ø2 23
Ø
MACHINE TOOL
50 507.5 Ø210 (8" CHUCK)
Ø50
HYUNDAI WIA
Ø254 (10" CHUCK)
100
Ø2
40
Ø304 (12" CHUCK)
Ø2
40
Y Series
Ø
Ø3
67
(M
AX Ø4
3
0
0
10
0
CU 20
TT
IN
G
DI
A .)

Ø2
40
12
L-SY Series
0
5 Ø2
Ø23 55
182.5 182.5 80 35 210 55
365 115 265

(X2-STROKE)
80
Ø2
Ø2
50 507.5 Ø210 (8" CHUCK)
Ø50
22
Ø254 (10" CHUCK) +
100
B) 23
(SU Ø304 (12" CHUCK)
10
Ø2
Ø25 83
40
87
4
25
Ø
SY Series
Ø
Ø3
67
(M
AX Ø4
30
0
0
10 CU 20
TT
IN
G
DI
A.
)
5
4 6.
Ø2
40 Ø2
12
Ø2
0
55
5
Ø23
182.5 182.5 80 35 210 55
365 115 265

(X2-STROKE)
172.8 265(X-STROKE) 103.9 265(X-STROKE)

172.8 103.9
35 5 225 35 230
Ø175 (6") Ø175 (6")
Sub SP. Sub SP.
(Y-STROKE)
(Y-STROKE)
60 60
60 60
120
120
0 E) 0 E)
24 24
R OK OK
-ST -S TR
(YS
“A”
“A” 40 (YS
Main SP. 121.1 103.9 100 Main SP. 2 161.1 103.9 58
365 325
“A” : L2000 Series (8″) | L2600 Series (10″) | L3000 Series (12″)

Specifications
Tooling Travel Range unit : mm(in)
L2000Y
O.D. Tool holder I.D. Tool holder O
50 63 50 75 590 (23.2) 50 63
(2) (2.5) (2) (3) (Z-STROKE) (2) (2.5)
112 39 48.5 112 39 48.5
(X-STROKE)
40 225 (8.9)
(4.4) (1.5) (1.9) (4.4) (1.5) (1.9)
55 210 (8.3)
(X-STROKE)
265 (10.4)
265 (10.4)
(8″)
(8″)
(8″)
(1.3)
(1.6)
(2.2)
33
120 (4.7)
(QUILL)
199.5 (7.9) 590 (23.2) 121.5 125 (4.9) 560 (22) 30 124.5 199.5 (7.9)
(TAIL TRAVEL) (4.8) (1.2) (4.9)
Axial driven Tool holder Angular driven Tool holder Axial
50 117 590 (23.2) 50 117

(2) (4.6) (Z-STROKE) 112 590 (23.2) (2) (4.6)
(4.4) (Z-STROKE)
(0.1) (X-STROKE)
265 (10.4)
(X-STROKE)
40 225 (8.9)
265 (10.4)
(1.3)
33
(8″)
(8″)
(8″)
(1.6)
2
(0.3)
7
167 (6.6) 590 (23.2) 53.5 560 (22) 30 137 167 (6.6)
(2.1) (1.2) (5.4)
Face Tool holder
50 61 590 (23.2)
(2)(2.4) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2)
50
(8″)
(2.4)
(0.4)
10
111 560 (22) 30 138.5

(4.4) (1.2) (5.5)

Specifications
L2000LY
MACHINE TOOL
HYUNDAI WIA
r O.D. Tool holder I.D. Tool holder
50 63 830 (32.7) 50 75 830 (32.7) 48 65

(2) (2.5) (Z-STROKE) (2) (3) (Z-STROKE) (1.9) (2.6)
112 39 48.5 118

(X-STROKE)
40 225 (8.9)
(X-STROKE)
(4.4) (1.5) (1.9) (4.6) (

55 210 (8.3)
265 (10.4)
265 (10.4)
(10″)
(8″)
(8″)
L-SY Series
(1.3)
(1.6)
(2.2)
33
120 (4.7)
(QUILL)
30 124.5 199.5 (7.9) 830 (32.7) 121.5 125 (4.9) 800 (31.5) 30 124.5 203.
(1.2) (4.9) (TAIL TRAVEL) (4.8) (1.2) (4.9) (8)
holder Axial driven Tool holder Angular driven Tool holder

24
50 117 830 (32.7)
+ 196 (7.7)
(2) (4.6) (Z-STROKE) 112 830 (32.7) 25
(4.4) (Z-STROKE)
(0.1) (X-STROKE)
265 (10.4)
(X-STROKE)
40 225 (8.9)
265 (10.4)
(1.3)
33
(10″)
(8″)
(8″)
(1.6)
2
(0.3)
7
30 137 167 (6.6) 830 (32.7) 53.5 800 (31.5) 30 137 167 (6.6
1.2) (5.4) (2.1) (1.2) (5.4)
Face Tool holder
50 61 830 (32.7)
(2)(2.4) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2)
50
(8″)
(2.4)
(0.4)
10
111 800 (31.5) 30 138.5

(4.4) (1.2) (5.5)

Specifications
L2000SY
O.D. Tool holder I.D. Tool holder
50 63 590 (23.2) 50 75 590 (23.2) 50 63

(2) (2.5) (Z-STROKE) (2) (3) (Z-STROKE) (2) (2.5)
112 39 112 39
(X-STROKE)
40 225 (8.9)
(X-STROKE)
(4.4) (1.5) (4.4) (1.5)

210 (8.3)
265 (10.4)
265 (10.4)
(0.7) (1.5) (1.5)

37
(1.6) (1.9)
47
(8″)
(8″)
(8″)
(6″)
(6″)
(1.6)
17 38
55 (2.2)
40
81(3.2)
32 91 (3.6) 123 (4.8)
133 (5.2) 520 (20.5)(MAX. WORK LENGTH) (1.3)
207 125 (4.9) 386 (15.2) 150 (5.9) 54 195 (7.7) 133 (5.2)
590 (23.2) (8.1) (2.1)
270 (10.6) 270 (10.6)
(ZB-STROKE)
Double O.D. Tool holder Double I.D. Tool holder Do
50 229 (9) 590 (23.2) 50 158 (6.2) 590 (23.2) 50 229 (9)
(2) (Z-STROKE) (2) (Z-STROKE) (2)
(X-STROKE)
55 210 (8.3)
67 198 (7.8)
(X-STROKE)
265 (10.4)
20 (0.8)
265 (10.4)
(1.3) (1.4) (3.7)

(1.3)(0.9)(1.3)
32 35 93
32 23 32
(8″)
(6″)
(8″)
(6″)
(8″)
(2.2)
(2.6)
279 (11) 386 (15.2) 156 (6.1) 48 41(1.6) 208 (8.2) 386.5 (15.2) 155.5 32 16 (0.6) 279 (11)
(1.9) (6.1) (1.3)
Axial driven Tool holder Angular driven Tool holder Ax
50 117 590 (23.2) 50 117

(2) (4.6) (Z-STROKE) 112.4 590 (23.2) (2) (4.6)
(4.4) (Z-STROKE)
(X-STROKE)
265 (10.4)
(X-STROKE)
40 225 (8.9)
15 (0.6)
265 (10.4)
128 (5)
(0.4) (2.6)
65
(8″)
(6″)
(8″)
(6″)
(8″)
(1.6)
(0.1)
10
2
30 (1.2)
167 (6.6) 386 (15.2) 123 (4.8) 51 124 (4.9) 112.4 524 (20.6) 66 207.6 (8.2) 167 (6.6)
(2) (4.4) (2.6)
Face Tool holder
50 61 590 (23.2)
(2)(2.4) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(0.6) (0.8) (2.2)

15 20 55
(8″)
(6″)
(2.4)
30 (1.2)
111 385 (15.2) 120 55 209 (8.2)
(4.4) (4.7) (2.2)

Specifications
L2000LSY
MACHINE TOOL
HYUNDAI WIA
50 63 830 (32.7) 50 75 830 (32.7) 48 65

(2) (2.5) (Z-STROKE) (2) (Z-STROKE) (1.9) (2.6)
112 39 118 (4.6)
(X-STROKE)
40 225 (8.9)
(X-STROKE)
(4.4) (1.5)
210 (8.3)
265 (10.4)
265 (10.4)
(0.7) (1.5) (1.5)

37
(1.6) (1.9)
(10″)
47
(8″)
(8″)
(6″)
(6″)
(1.6)
17 38
40
(2.2)
32 (1.3)
55

123 (4.8) 81 91 (3.6)
) 133 (5.2) 760 (29.9)(MAX. WORK LENGTH) (3.2) 207 (8.1) 125 (4.9) 626 (24.6) 150 (5.9) 54 195 (7.7) 135 (5.3
830 (32.7) (2.1)
270 (10.6) 272
(ZB-STROKE)
L-SY Series
Double O.D. Tool holder Double I.D. Tool holder
50 229 (9) 830 (32.7) 50 158 (6.2) 830 (32.7) 48 231 (

(2) (Z-STROKE) (2) (Z-STROKE) (1.9)
(X-STROKE)
55 210 (8.3)
67 198 (7.8)
(X-STROKE)
265 (10.4)
20 (0.8)
265 (10.4)
(1.3) (1.4) (3.7)

(1.3) (0.9) (1.3)
32 35 93
32 23 32
(10″)
(8″)
(6″)
(8″)
(6″)
(2.2)
(2.6)
26
0.6) 279 (11) 626 (24.6) 156 (6.1) 48 41(1.6) 208 (8.2) 626.5 (24.7) 155.5 32 16 (0.6)
+ 279 (1
(1.9) (6.1) (1.3) 27
Axial driven Tool holder Angular driven Tool holder
50 117 830 (32.7) 196 (7.7)

(2) (4.6) (Z-STROKE) 112.4 830 (32.7)
(4.4) (Z-STROKE)
(0.1) (X-STROKE)
265 (10.4)
(X-STROKE)
40 225 (8.9)
15 (0.6)
265 (10.4)
128 (5)
(0.4) (2.6)
65
(10″)
(8″)
(6″)
(8″)
(6″)
(1.6)
10
2
30 (1.2)
) 167 (6.6) 626 (24.6) 123 (4.8) 51 124 (4.9) 112.4 764 (30) 66 207.6 (8.2) 167 (6.6
(2) (4.4) (2.6)
Face Tool holder
50 61 830 (32.7)
(2)(2.4) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2.2)
20(0.8)
55
(8″)
(6″)
(2.4)
(0.6)
15
30 (1.2)
111 625 (24.6) 120 55 209 (8.2)
(4.4) (4.7) (2.2)

Specifications
L2600Y
48 65 830 (32.7) 48 77 830 (32.7) 35 78

(1.9) (2.6) (Z-STROKE) (1.9) (3) (Z-STROKE) (1.4) (3.1)
118 46 37.5 3
(X-STROKE)
40 225 (8.9)
(X-STROKE)
(4.6) (1.8) (1.5)

55 210 (8.3)
265 (10.4)
265 (10.4)
(10″)
(10″)
(12″)
(1.3)
(1.6)
(2.2)
33
120 (4.7)
(QUILL)
4.5 203.5 830 (32.7) 121.5 125 (4.9) 800 (31.5) 30 124.5 203.5
.9) (8) (TAIL TRAVEL) (4.8) (1.2) (4.9) (8)
196 (7.7) 830 (32.7) 35 161

(Z-STROKE) 48 64 830 (32.7) (1.4) (6.3)
(1.9) (2.5) (Z-STROKE)
(0.1) (X-STROKE)
16
265 (10.4)
(X-STROKE)
40 225 (8.9)
(0.6)
265 (10.4)
(1.3)
33
(10″)
(12″)
(10″)
(1.6)
2
(0.3)
7
37 167 (6.6) 830 (32.7) 53.5 112 800 (31.5) 30 137 196
.4) (2.1) (4.4) (1.2) (5.4) (7.7)
Face Tool holder
48 63 830 (32.7)
(1.9) (2.5) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2)
50
(10″)
(2.4)
(0.4)
10
111 800 (31.5) 30 138.5

(4.4) (1.2) (5.5)

Specifications
L2600SY
MACHINE TOOL
HYUNDAI WIA
48 65 830 (32.7) 48 77 830 (32.7)

(1.9) (2.6) (Z-STROKE) (1.9) (3) (Z-STROKE)
118 (4.6) 46
(X-STROKE)
40 225 (8.9)
(X-STROKE)
(1.8)
210 (8.3)
265 (10.4)
265 (10.4)
O.D. T
(0.7) (1.5) (1.5)
37
(1.6) (1.9)
(10″)
(10″)
47
(6″)
(6″)
(6″)
(1.6)
17 38
40
(2.2)
32 (1.3)
55

123 (4.8) 81 91 (3.6)
4 195 (7.7) 135 (5.3) 760 (29.9)(MAX. WORK LENGTH) (3.2) 207 (8.1) 125 (4.9) 626 (24.6) 150 (5.9) 54 195 (7.7)
.1) 272 (10.7) 830 (32.7) (2.1)
(ZB-STROKE)
L-SY Series
48 231 (9.1) 830 (32.7) 48 160 830 (32.7)

(1.9) (Z-STROKE) (1.9) (Z-STROKE) I.D. To
(X-STROKE)
55 210 (8.3)
67 198 (7.8)
(X-STROKE)
265 (10.4)
20 (0.8)
265 (10.4)
(1.3) (1.4) (3.7)

(1.3) (0.9) (1.3)
32 35 93
32 23 32
(10″)
(10″)
(6″)
(6″)
(6″)
(2.2)
(2.6)
28
.5 32 16 (0.6) 279 (11) 626 (24.6) 156 (6.1) 48 41(1.6) 208 (8.2) 626.5 (24.7) 155.5 32 16 (0.6)
+
1) (1.3) (1.9) (6.1) (1.3) 29
er Axial driven Tool holder Angular driven Tool holder Axi

Too
196 (7.7) 830 (32.7) 48 64.4 830 (32.7)
(Z-STROKE) (1.9) (2.5) (Z-STROKE)
(0.1) (X-STROKE)
16
265 (10.4)
(X-STROKE)
40 225 (8.9)
15 (0.6)
(0.6)
265 (10.4)
128 (5)
(0.4) (2.6)
65
(10″)
(10″)
(6″)
(6″)
(6″)
(1.6)
10
2
30 (1.2)
207.6 (8.2) 167 (6.6) 626 (24.6) 123 (4.8) 51 124 (4.9) 112 764 (30) 66 208 (8.2) Angu
6) (2) (4.4) (2.6)
Too
Face Tool holder
48 63 830 (32.7)
(1.9) (2.5) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2.2)
20(0.8)
55
(10″)
(6″)
Face T
(2.4)
(0.6)
15
30 (1.2)
111 625 (24.6) 120 55 209 (8.2)
(4.4) (4.7) (2.2)

Specifications
L2600LSY
48 65 1350 (53.1)
(1.9) (2.6) (Z-STROKE)
35 78
120 46 37.5 (1.4) (3.1)
(X-STROKE)
(4.7) (1.8) (1.5)
55 210 (8.3)
265 (10.4)
(10″)
O.D. Tool holder
(2.2)
(12″)
(6″)
120 (4.7)
(QUILL)
203.5 (8) 1350 (53.1) (TAIL TRAVEL) 121.5
(4.8)
195 (7.7) 1417 (55.8) 148 (5.8)
1)
35 285 (11
(1.4)
48 77 1350(53.1)
r (1.9) (3) (Z-STROKE)
(X-STROKE)
40 225 (8.9)
265 (10.4)
35 244
(10″)
I.D. Tool holder
(1.3)
(1.6)
(1.4) (9.6)
33
30 (1.2)
125 1320 (52) 124.5
(4.9) (4.9)
(12″)
(6″)
48 148 1350 (53.1)

(1.9) (5.8) (Z-STROKE)
5 32 16 (0.6) 279 (11)

(0.1) (X-STROKE)
265 (10.4)
(1.3)
der Axial driven

(10″)
Tool holder
2
196 1350 (53.1) 53.5 35 161

(7.7) (2.1) (1.4) (6.3)
112.43 1350 (53.1)

(4.4) (Z-STROKE)
(12″)
(6″)
(X-STROKE)
40 225 (8.9)
265 (10.4)
Angular driven
(1.3)
33
208 (8.2) 196

(10″)
(1.6)
(7.7)
Tool holder
(0.3)
7
30 (1.2)
112.4 1320 (52) 137.1
(4.4) (5.4)
46 65 1350 (53.1)
(1.8) (2.6) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(10″)
(2)
Face Tool holder

50
(2.4)
(0.4)
10
30 (1.2)
111 1320 (52) 138.5
(4.4) (5.5)

Specifications
L3000Y
MACHINE TOOL
HYUNDAI WIA
35 78 830 (32.7) 35 90 830 (32.7)

(1.4) (3.1) (Z-STROKE) (1.4) (3.5) (Z-STROKE)
33.3

(X-STROKE)
(X-STROKE)
(1.3)
55 210 (8.3)
265 (10.4)
265 (10.4)
225
(12″)
(12″)
L-SY Series
(1.3)
(1.3)
(2.2)
33
40
120 (4.7)
30 124.5 (QUILL) 125 (4.9)
203.5 830 (32.7) 121.5 800 (31.5) 30 124.5
(1.2) (4.9) (8) (TAIL TRAVEL) (4.8) (1.2) (4.9)
older Axial driven Tool holder Angular driven Tool holder

30
35 161 830 (32.7)
+
(1.4) (6.3) (Z-STROKE) 35 77.4 830 (32.7) 31
(1.4) (3) (Z-STROKE)
(0.1) (X-STROKE)
265 (10.4)
(X-STROKE)
265 (10.4)
225
(1.3)
33
(12″)
(12″)
40
2
(0.3)
7
30 137 196 830 (32.7) 53.5 112.4 800 (31.5) 30 137.1

(1.2) (5.4) (7.7) (2.1) (4.4) (1.2) (5.4)
Face Tool holder
35 76 830 (32.7)
(1.4) (3) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2)
50
(12″)
(2.4)
(0.4)
10
111 800 (31.5) 30 138.5

(4.4) (1.2) (5.5)

Specifications
L3000SY
35 78 830 (32.7) 35 90 830 (32.7)

(1.4) (3.1) (Z-STROKE) (1.4) (3.5) (Z-STROKE)
(X-STROKE)
40 225 (8.9)
(X-STROKE)
55 210 (8.3)
265 (10.4)
265 (10.4)
O.
(0.7) (1.5) (1.5)
37
(1.6) (1.9)
(12″)
(12″)
47
(6″)
(6″)
(1.6)
(2.2)
17 38
40
32 (1.3)
123 (4.8) 81 91 (3.6)
148 (5.8) 760 (29.9)(MAX. WORK LENGTH) (3.2) 207 (8.1) 125 (4.9) 626 (24.6) 150 (5.9) 54 195 (7.7)
830 (32.7) (2.1)
35 285 (11.2)
(1.4) (ZB-STROKE)
35 244 830 (32.7) 35 173 830 (32.7)

(1.4) (9.6) (Z-STROKE) (1.4) (6.8) (Z-STROKE) I.D
(X-STROKE)
55 210 (8.3)
67 198 (7.8)
(X-STROKE)
265 (10.4)
20 (0.8)
265 (10.4)
(1.3) (1.4) (3.7)

(1.3) (0.9) (1.3)
32 35 93
32 23 32
(12″)
(12″)
(6″)
(6″)
(2.2)
(2.6)
279 (11) 626 (24.6) 156 (6.1) 48 41(1.6) 208 (8.2) 626.5 (24.7) 155.5 32 16 (0.6)
(1.9) (6.1) (1.3)
35 161 830 (32.7)

(1.4) (6.3) (Z-STROKE) 35 77.4 830 (32.7)
(1.4) (3) (Z-STROKE)
(0.1) (X-STROKE)
265 (10.4)
(X-STROKE)
40 225 (8.9)
15 (0.6)
265 (10.4)
128 (5)
(0.4) (2.6)
65
(12″)
(12″)
(6″)
(6″)
(1.6)
10
2
30 (1.2)
196 626 (24.6) 123 (4.8) 51 124 (4.9) 112.4 764 (30) 66 207.6 A
(7.7) (2) (4.4) (2.6) (8.2)
Face Tool holder
35 76 830(Z-STROKE)
(1.4) (3)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(2.2)
20(0.8)
55
(12″)
(6″)
Fa
(2.4)
(0.6)
15
30 (1.2)
111 625 (24.6) 120 55 209 (8.2)
(4.4) (4.7) (2.2)

Specifications
L3000LSY
MACHINE TOOL
HYUNDAI WIA
39 74 (2.9) 1350 (53.1) 33
(1.5) (Z-STROKE) (1.3)
177.2 33.3 (1.3)
(7) 50.5
S/G (2)
(X-STROKE)
55 210 (8.3)
265 (10.4)
(12″)
O.D. Tool holder
(2.2)
(6″)
120 (4.7)

(QUILL)
210.5 1350 (53.1) 121.5
(8.3) (TAIL TRAVEL) (4.8)
195 (7.7)
1)
L-SY Series
39 86 1350 (53.1)
(1.5) (3.4) (Z-STROKE)
r
(X-STROKE)
40 225 (8.9)
265 (10.4)
(12″)
I.D. Tool holder
(1.3)
(1.6)
33
30 (1.2)
125 1320 (52) 124.5
(4.9) (4.9)
(6″)
39 157 1350 (53.1) 32

(1.5) (6.2) (Z-STROKE) +
5 32 16 (0.6) 33
(0.1) (X-STROKE)
265 (10.4)
(1.3)
der Axial driven

(12″)
Tool holder
2
196 1350 (53.1) 53.5

(7.7) (2.1)
39 73.43 1350 (53.1)

(1.5) (2.9) (Z-STROKE)
(6″)
(X-STROKE)
40 225 (8.9)
265 (10.4)
Angular driven
(1.3)
33
207.6
(12″)
(1.6)
(8.2)
Tool holder
(0.3)
7
30 (1.2)
112.4 1320 (52) 137.1
(4.4) (5.4)
39 72 1350 (53.1)
(1.5) (2.8) (Z-STROKE)
60 205 (8.1)
(X-STROKE)
265 (10.4)
(12″)
(2)
Face Tool holder

50
(2.4)
(0.4)
10
30 (1.2)
111 1320 (52) 138.5
(4.4) (5.5)

Specifications
Specifications [ ] : Option
ITEM L2000Y L2000LY L2000SY L2000LSY

Swing Over the Bed mm(in) Ø870 (34.3″)
Swing Over the Carriage mm(in) Ø670 (26.4″)
Max. Turning Dia. mm(in) Ø420 (16.5″)
CAPACITY
Max. Turning Length mm(in) 520 (20.5″) 760 (29.9″) 520 (20.5″) 760 (29.9″)
Main mm(in) Ø65 (2.6″)
Bar Capacity
Sub mm(in) - Ø51 (2″)
Main inch 8″
Chuck Size
Sub inch - 6″
Main mm(in) Ø76 (3″)
Spindle Bore
Sub mm(in) - Ø62 (2.4″)
Spindle Speed Main r/min 5,000 [4,500]

(rpm) Sub r/min - 6,000 [4,500]
Main kW(HP) 22/18.5 (29.5/24.8) [18.5/11 (24.8/14.8)]
Motor (Max/Cont.)
Spindle Sub kW(HP) - 15/11 (20.1/14.8) [11/5.5 (14.87.4)]
Torque Main N・m(lbf・ft) 358/214 (264/157.8) [314.2/186.2 (231.7/137.3)]

(Max/Cont.) Sub N・m(lbf・ft) - 135/99.1 (99..6/73.1) [124/62.1 (91.5/45.8)]
Main - Built-in [Belt]
Spindle Type
Sub - - Built-in [Belt]
Main - A2-6
Spindle Nose
Sub - - A2-5
C-axis Indexing deg 0.001˚
X/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Travel
Z/ZB mm(in) 590 (23.2″) 830 (32.7″) 590/590 (23.2″/23.2″) 830/830 (32.7″/32.7″)
Feed Rapid Traverse X/Y m/min(ipm) 30/10 (1,181/394)
Rate Z/ZB m/min(ipm) 30/30 (1,181/1,181)
Slide Type - BOX GUIDE
No. of Tools ea 12
OD mm(in) □25 (1″)
Tool Size
turret ID mm(in) Ø50 (2″)
Indexing Time sec/step 0.15
Y-Axis Type - Wedge Type
Motor (Max/Cont.) kW(HP) - 5.5/1.5 (7.4/2)
Milling Tool Speed (rpm) r/min - 5,000
live tool Torque (Max/Cont.) N・m(lbf・ft) - 35.3/25.3 (26/18.7)
Collet Size mm(in) - Ø25 (1″) {ER40}
Type - - BMT65P
Taper - MT#5 -
tail Quill Dia. mm(in) Ø100 (3.9″) -
Stock Quill Travel mm(in) 120 (4.7″) -
Travel mm(in) 590 (23.2″) 830 (32.7″) -
tank Coolant Tank ℓ(gal) 275 (72.6) 290 (76.6) 275 (72.6) 290 (76.6)
Capacity Lubricating Tank ℓ(gal) 3 (0.8)
Electric Power Supply kVA 31 45
power
Thickness of Power Cable Sq Over 25 Over 35
Supply
Voltage V/Hz 220/60 (200/50*)
Floor Space (L×W) mm(in) 3,220×1,890 (126.8″x74.4″) 3,600×1,890 (141.7″x74.4″) 3,220×1,890 (126.8″x74.4″) 3,600×1,890 (141.7″x74.4″)
Machine Height mm(in) 1,950 (76.8)
Weight kg(lb) 5,500 (12,125) 6,000 (13,228) 5,800 (12,787) 6,300 (13,889)
NC Controller - HW FANUC i Series
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)

Specifications
ITEM L2600Y L2600LY L2600SY

MACHINE TOOL
HYUNDAI WIA
CAPACITY
Max. Turning Length mm(in) 760 (29.9″) 1,280 (50.4″) 760 (29.9″)
Bar Capacity
Sub mm(in) - Ø51 (2″)
Main inch 10″
Chuck Size
Sub inch - 6″
Spindle Bore
Sub mm(in) - Ø62 (2.4″)
Main 4,000 [3,500]

Spindle Speed r/min
(rpm) Sub r/min - 6,000 [4,500]
Main kW(HP) 22/15 (29.5/20.1) [26/18.5 (34.9/24.8)]
L-SY Series
Motor (Max/Cont.)
Spindle Sub kW(HP) - 15/11 (20.1/14.8) [11/5.5 (14.87.4)]
Torque Main N・m(lbf・ft) 599/409 (441.8/301.7) [733.7/522.1 (541.1/385.1)]

Spindle Type
Main - A2-8
Spindle Nose
Sub - - A2-5
34
X/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Travel +
Z/ZB mm(in) 830 (32.7″) 1,350 (53.1) 830/830 (32.7″/32.7″) 35
Rate Z/ZB m/min(ipm) 30/30 (1,181/1,181)
No. of Tools ea 12
OD mm(in) □25 (1″)
Tool Size
Type - - BMT65P
Taper - MT#5 -
Travel mm(in) 830 (32.7″) 1,350 (53.1) -
tank Coolant Tank ℓ(gal) 290 (76.6) 320 (84.5) 290 (76.6)
power
Supply
Voltage V/Hz 220/60 (200/50*)
Floor Space (L×W) mm(in) 3,600×1,890 (141.7″x74.4″) 4,120×1,890 (162.2″x74.4″) 3,600×1,890 (141.7″x74.4″)
Machine Height mm(in) 1,950 (76.8)
Weight kg(lb) 6,200 (13,669) 7,500 (16,535) 6,550 (14,440)

Specifications
ITEM L3000Y L3000LY L3000SY

CAPACITY
Max. Turning Length mm(in) 760 (29.9″) 1,280 (50.4″) 760 (29.9″)
Main mm(in) Ø102 (4″)
Bar Capacity
Sub mm(in) - Ø51 (2″)
Main inch 12″
Chuck Size
Sub inch - 6″
Main mm(in) Ø115 (4.5″)
Spindle Bore
Sub mm(in) - Ø62 (2.4″)
Spindle Speed Main r/min 3,000 [2,800]

(rpm) Sub r/min - 6,000 [4,500]
Main kW(HP) 37/25 (49.6/33.5) [26/18.5 (34.9/24.8)]
Motor (Max/Cont.)
Spindle Sub kW(HP) - 15/11 (20.1/14.8) [11/5.5 (14.87.4)]
Torque Main N・m(lbf・ft) 1,262/1,003 (930.8/739.8) [1,123/664 (828.2/489.7)]

Spindle Type
Main - A2-11
Spindle Nose
Sub - - A2-5
X/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Travel
Z/ZB mm(in) 830 (32.7″) 1,350 (53.1) 830/830 (32.7″/32.7″)
Rate Z/ZB m/min(ipm) 30/30 (1,181/1,181)
No. of Tools ea 12
OD mm(in) □25 (1″)
Tool Size
Type - - BMT65P
Taper - MT#5 -
Travel mm(in) 830 (32.7″) 1,350 (53.1) -
tank Coolant Tank ℓ(gal) 290 (76.6) 320 (84.5) 290 (76.6)
power
Supply
Voltage V/Hz 220/60 (200/50*)
Floor Space (L×W) mm(in) 3,600×1,890 (141.7″x74.4″) 4,320×1,890 (170.1″x74.4″) 3,600×1,890 (141.7″x74.4″)
Machine Height mm(in) 1,950 (76.8″)
Weight kg(lb) 6,700 (14,771) 7,800 (17,196) 6,900 (15,212)

Controller
HYUNDAI WIA FANUC i Series [ ] : Option
Controlled axis / Display / Accuracy Compensation Program input

2 axes (X, Z) / 3 axes (X, Z, C / X, Z, B) / 4 axes (X, Z, Y, C) Multiple repetitive cycles Ⅰ, Ⅱ
Control axes
5 axes (X, Z, B, C, A) / 6 axes (X, Z, Y, B, C, A) Canned cycle for turning
Simultaneously controlled axes 2 axes [Max. 4 axes] Auxiliary function / Spindle speed function
MACHINE TOOL
Designation of spindle axes 3 axes (1 path) Auxiliary function M & 4 digit
HYUNDAI WIA
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Level-up M Code High speed / Multi / Bypass M code
Least setting Unit
C, A axes : 0.001 deg Spindle speed function S & 4 digit , Binary output
X, Z, Y, B axes : 0.001 mm (0.0001 inch) Spindle override 0% ~ 150% (10% Unit)
Least input increment
C, A axes : 0.001 deg Multi position spindle orientation M19
Inch / Metric conversion G20 / G21 Rigid tapping
High response vector control Constant surface speed control G96, G97
Interlock All axes / Each axis Tool function / Tool compensation
Machine lock All axes Tool function T & 2 digit + Offset 2 digit
± 0 ~ 9999 pulses Tool life management
Backlash compensation
(Rapid traverse / Cutting feed) Tool offset pairs 128 pairs
Position switch Tool nose radius compensation G40, G41, G42
LCD / MDI 8.4 inch / 10.4 inch color LCD Geometry / Wear compensation

Feedback Absolute motor feedback Direct input of offset measured B
Stored stroke check 1 Over travel Editing function
Stored stroke check 2, 3 Part program storage size 1280m (512KB)
L-SY Series
PMC axis control No. of registerable programs 1000 ea
Operation Program protect
Automatic operation (Memory) Background editing
MDI operation Extended part program editing Copy, move and change of NC program
DNC operation Needed DNC software / CF card Memory card program edit
Program restart Data input / output & Interface
Wrong operation prevention RS 232C serial port, CF card, USB memory
I/O interface
Program check function Dry run Embedded Ethernet interface
Single block Screen hard copy
Search function Program Number / Sequence Number External message
Interpolation functions External key input
Nano interpolation External workpiece number search
Positioning G00 Automatic data backup
Linear interpolation G01 Setting, display and diagnosis
36
Circular interpolation G02, G03 Self-diagnosis function
+
Exact stop mode Single : G09, Continuous : G61 History display & Operation Alarm & Operator message & Operation 37
Dwell G04, 0 ~ 9999.9999 sec Run hour / Parts count display
Skip G31 Maintenance information
1st reference : G28 Actual cutting feedrate display
Reference position return 2nd reference : G30 Display of spindle speed / T code
Ref. position check : G27 Graphic display
Thread synchronous cutting Operating monitor screen Spindle / Servo load etc.
Thread cutting retract Power consumption monitoring Spindle & Servo
Variable lead thread cutting Spindle / Servo setting screen
Multi / Continuous threading Multi language display Support 20 languages
Feed function / Acc. & Dec. control Display language switching Selection of 5 optional Languages
Rapid traverse LCD Screen Saver Screen saver
Jog : 0~2,000 mm/min (79 ipm) Unexpected disturbance torque BST (Back spin torque limit)
Manual feed
Manual handle : x1, x10, x100 pulses Function for machine type
Reference position return Cs contour control (C & A axes) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Cutting Feed command Direct input F code Polar coordinate interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Feedrate override 0 ~ 200% (10% Unit) Cylindrical interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Rapid traverse override F1%, F5%, F25% / 50%, F100% Canned cycle for drilling Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
Override cancel Spindle orientation expansion MS, SY TTS, TTMS, TTSY
Feed per minute G98 Spindle synchronous control MS, SY TTS, TTMS, TTSY
Feed per revolution G99 Torque control MS, SY TTS, TTMS, TTSY
Look-ahead block 1 block Y axis offset Y, SY, TTSY
Program input Arbitrary angular control Y, SY, TTSY
Tape Code EIA / ISO Composite / Superimposed control MS, SY TTS, TTMS, TTSY
Optional block skip 1 ea Balance cutting MS, SY TTS, TTMS, TTSY
Absolute / Incremental program G90 / G91
Program stop / end M00, M01 / M02, M30 Option
Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch) Optional block skip 9 ea
Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19 Fast ethernet Need board option
Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59) Data server Need board option
Manual absolute Fixed ON Protection of data at 8 levels
Programmable data input G10 Tool offset pairs 200 pairs
Sub program call 10 folds nested Part program storage size 5120m (2MB)
Custom macro #100 ~ #149, #500 ~ #549 Polygon turning (2 Spindles) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY
G code system A Helical interpolation
Programmable mirror image G51.1, G50.1 Manual Guide i Conversational auto program
G code preventing buffering G4.1 Dynamic graphic display
Direct drawing dimension program Including Chamfering / Corner R

Global Network
+\XQGDL:,$
0DFKLQH7RROV$PHULFD
+\XQGDL:,$
0DFKLQH7RROV(XURSH
5DXQKHLP6HUYLFH&HQWHU
5DQXKHLP5 '&HQWHU
%(,-,1*%5$1&+2)),&( +($'48$57(5
:8+$12)),&(
4,1*'$2%5$1&+2)),&(
&+(1*'8%5$1&+2)),&(
&+21*4,1*2)),&(
-,$1*68
+<81'$,:,$
,1',$%5$1&+2)),&(
+\XQGDL:,$
0DFKLQH7RROV&KLQD
6+$1*+$,%5$1&+2)),&(
*8$1*=+28%5$1&+2)),&(

Global Network
Headquarter
Changwon Technical Center / R&D Center / Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
MACHINE TOOL
HYUNDAI WIA
Gyeongsangnam-do, Korea (Zip Code : 51533)
TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center

37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do,
Korea (Zip Code : 16082)
TEL : +82 31 596 8209 Fax : +82 55 210 9804

L-SY Series
OVERSEAS OFFICES
Hyundai WIA Jiangsu HYUNDAI WIA Chengdu Branch Office
Machine Tools America Company No.6 Fenghuang Road, NO.508 Room, B Block, AFC Plaza, NO.88
265, Spring Lake Drive, Itasca, IL, 60143 Fenghuang Town, Zhangjjagang City, Jiaozi Road, High-tech Zone, Chengdu,
TEL : +1 630 625 5600 Jiangsu province, China China
FAX : +1 630 625 4733 TEL : +86 512 5672 6808 TEL : +86 028 8665 2985
FAX : +86 512 5671 6960 FAX : +86 028 8665 2985 38
+
39
Hyundai WIA Hyundai WIA Machine Tools China Qingdao Branch Office
Machine Tools Europe Shanghai Branch Office Room 1207, Cai Fu Building, 182-6 Haier
Kaiserleipromenade 5, 63067 Offenbach, 1-3F, Bldg6, No.1535 Hongmei Road, Middle Road, Qingdao, China
Germany Xuhui District, Shanghai, China TEL : +86 532 8667 9334
TEL : +49 69271 472 701 TEL : +86 021 6427 9885 FAX : +86 532 8667 9338
FAX : +49 69271 472 719 FAX : +86 021 6427 9890
Raunheim Service Center Beijing Branch Office Wuhan Office

Raunheim R&D Center Floor 14, Zhonghangji Plaza B, No.15 306-2, A Tower,Jiayu Gpmggian, No12
Frankfurter. 63, 65479 Raunheim, Ronghua South Road, BDA Dist., Daxing Chuangye Road, Economic Development
Germany Dist., Beijing, China 100176 Zone, Wuhan, Hubei, China
TEL : +49 6142 9256 111 TEL : +86 010 8453 9850 TEL : +86 027 5952 3256
FAX : +49 6142 9256 100 FAX : +86 010 8453 9853 FAX : +86 027 5952 3256
India Branch Office Guangzhou Branch Office Chongqing Office

#4/169, Rajiv Gandhi Salai, (OMR), Room 311, Unit 1-3, Poly Tal Tu Wun, Room 951, #3, Jinrongcheng T3, Jiangbei,
Kandanchavadi, Chennai-600 096, Hanxi Avenue, Panyu District, Guangzhou, Chongqing, China
Tamilnadu, India China TEL : +86 23 6701 2970
TEL: +91-44-3290-1719 TEL : +86 020 8550 6595
FAX : +86 020 8550 6597

L2600SY Movie L2600SY 3D Movie
http://machine.hyundai-wia.com
Head Office & Factory

153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do Tel +82 55 280 9500
Overseas Sales Team
16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do Tel +82 31 593 8173
Hyundai WIA Machine Tools America

265 Spring Lake Drive,Itasca, IL, 60143 Tel +1 (630) 625 5600 Fax +1 (630) 625 4733
Hyundai WIA Machine Tools Europe
Kaiserleipromenade 5, D-63067 Offenbach, Germany Tel +49 69271 472 701 Fax +49 69271 472 719
India Branch Office
#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, India Tel +91 44 3290 1719
2017-04 001.001 ENG

Hyundai L2000sy L3000sy Turningcenter

Uploaded by

Copyright:

Available Formats

Hyundai L2000sy L3000sy Turningcenter

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hyundai L2000sy L3000sy Turningcenter

Uploaded by

Copyright:

Available Formats

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Main Chuck Sub Chuck Bed

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Y-Axis with Box Guideways Lathe for

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

30° Slant Type Bed

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Reduction of Non-Cutting Time

◉ Rapid Traverse Rate (X/Y/Z/ZB) : 30/10/30/30 m/min (1,181/294/1,181/1,181 ipm)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

0.001° Built-In Main Spindle

Built-In Sub Spindle

◉ Bar Capacity : Ø51 (Ø2″)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

L2000 Built-in Main Spindle L2600 Built-in Main Spindle 0

Power (kW[HP]) Torque (N·m[lbf·ft]) Power (kW[HP]) Torque (N·m[lbf·ft]) Powe

358N·m[264lbf·ft] (S3 15%) 22kW[29.5HP] (S3 15%)

Y-Axis Turning Center

37kW[49.6HP] (S2 30min) (Cont.)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Belt Type Main Spindle

0.001° C-Axis Control

Belt Type Sub Spindle

◉ Bar Capacity : Ø51 (Ø2″)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

26kW[34.9HP] (S3 25%.)

Y-Axis Turning Center

L3000 Belt Main Spindle Belt Sub Spindle 08

13 [10] 5.5kW[7.4HP] (Cont.) 62.1

0 269 467 700 1,402 2,800 0 845 2,535.2 4,500

18.5 kW (24.8 HP) 26 kW (34.9 HP)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Wedge Type Y-axis Structure

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Mill Turret (BMT65P)

Y-Axis Turning Center

5kW[20.1HP] (30min) 7.5kW[10HP] (30min) 5.5kW[7.4HP] (15min, S3 25%)

Speed (r/min) Spindle Speed (r/min) Spindle Speed (r/min)

700N∙m[516.3lbf∙ft] (S3 25%)

Torque(N∙m[lbf∙ft]) Power(kW[HP]) Torque(N∙m[lbf∙ft])

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Y-Axis Turning Center

Angular Type Double Type

Offset Type Both Sides Type

Both Sides Type 2-Spindle Type

❖ Consultation needed when ordering these options.

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

Faster processing and enhanced accuracy in are possible through the

USB Port (Standard)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

HYUNDAI WIA Smart System

Y-Axis Turning Center

HW-TM HW-ESS (Standard)

For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com

•The large (MT#5) tail stock ensures high accuracy

Type : Quill Quill Travel : 120mm (4.7″)

Quick and accurate tool calibration can be done by contacting the

Programmable + Live Center (MT#5) + Quill Std.

•The large (MT#5) tail stock ensures high accuracy

³(´