Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    AC 101 - Fisa Tehnica

    Uploaded by

    Andrei Panta
    Detector de geam spart, detector acustic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AC 101 - Fisa Tehnica

    Uploaded by

    Andrei Panta
    19 views2 pages
    Detector de geam spart, detector acustic

    Original Title

    AC 101 - Fisa tehnica

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Detector de geam spart, detector acustic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views2 pages

    AC 101 - Fisa Tehnica

    Uploaded by

    Andrei Panta
    Detector de geam spart, detector acustic

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    P/N 29001854 R004 8/10/05 9:24 AM Page 1

    Acuity
    TM

    DSC Glassbreak Detectors

    Breaking a window is one of the easiest and


    most common ways for an intruder to enter a
    home or business. To help protect against this type
    of intrusion, an Acuity glassbreak detector is needed.
    “Smart” enough to distinguish the sound of breaking
    glass from other common sounds found in homes and
    businesses, the detectors feature high-performance
    microphones and advanced microprocessor-based
    Digital Sound Analysis (DSA) that can determine all
    types of breaking framed glass (plate, float, tempered,
    wired and laminated) up to 25 feet away. Acuity
    glassbreak detectors can be mounted on walls
    or ceilings.

    Product Features:

    Omnidirectional microphone
    ▼

    Advanced microprocessor-based glassbreak sensor


    ▼

    High-level static and transient protection


    ▼

    High RF immunity with SMD construction


    ▼

    White noise rejection mechanism


    ▼

    Installer test mode for glassbreak sensor


    ▼

    Alarm memory (latching LED) for glassbreak sensor


    ▼

    MOV transient / static protection


    ▼

    Jumper selectable sensitivity range


    ▼

    Contact your DSC distributor


    www.dsc.com
    1-888-888-7838
    P/N 29001854 R004 8/10/05 9:24 AM Page 2

    Acuity
    TM

    DSC Glassbreak Detectors

    Locating the Detector


    For optimum protection, Acuity glassbreak detectors should be
    placed in clear view of their intended area of protection. Curtains,
    blinds and other window coverings will absorb sound energy from
    the shattering glass. If this is a potential problem, mount the
    detector as close as possible to the protected glass.
    Specifications
    Note: Do not mount the detector on the same wall as the Wall-Mount Models
    protected glass or near objects, such as speakers, that
    produce prolonged sounds. Dimensions . . . . . . . . . . . . . . . . . . . . . 3.5” (L) x 2.5” (W) x 0.8” (D)
    (89 mm x 64 mm x 20 mm)
    Input Voltage . . . . . . . . . . . . . . . . . . 9 to 16 VDC
    Current Draw . . . . . . . . . . . . . . . . . . 12 mA to 12 VDC
    AFT-100 Glassbreak Simulator Current in Alarm . . . . . . . . . . . . . . . 35 mA @ 12 VDC
    The AFT-100 glassbreak simulator provides the Alarm Relay: Contact Rating . . . 1 Amp @ 24 VDC
    most reliable and accurate indication of the Tamper Switch: Contact Rating..0.1 Amp @ 24 VDC
    correct mounting location for the detector. Do Microphone Type . . . . . . . . . . . . . . Omnidirectional Electret
    not install the detector beyond the maximum Installer Test Mode . . . . . . . . . . . . . . Jumper J1
    recommended range, even if the glassbreak Alarm Memory Mode . . . . . . . . . . . . Jumper J2
    simulator reports additional range. Future
    Detection Level . . . . . . . . . . . . . . . . . Jumper J3
    changes in room acoustics could reduce any
    additional range.

    Test for false alarm immunity by creating


    sounds in the room that will likely occur
    when the detector is armed.

    Acuity Mounting Locations


    Ceiling-Mount Models
    Dimensions . . . . . . . . . . . . . . . . . . . . . 4.6” (D) x 1.4” (H)
    (117 mm x 36 mm)
    Input Voltage . . . . . . . . . . . . . . . . . . 9 to 14.5 VDC
    Current Draw . . . . . . . . . . . . . . . . . . 24 mA to 12 VDC
    Current in Alarm . . . . . . . . . . . . . . . 32 mA @ 12 VDC
    Alarm Relay: Contact Rating . . . 1 Amp @ 24 VDC
    Ordering Information: Tamper Switch: Contact Rating..0.1 Amp @ 24 VDC
    Wall-Mount Microphone Type . . . . . . . . . . . . . . Omnidirectional Electret
    P/N 29001854 R004 Printed in Canada

    AC-100 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `A’ Alarm Contact Installer Test Mode . . . . . . . . . . . . . . Jumper J1


    AC-101 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `A’ Alarm Contact and Tamper Switch
    AC-102 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `C’ Alarm Contact and Tamper Switch Alarm Memory Mode . . . . . . . . . . . . Jumper J2
    Ceiling-Mount Detection Level . . . . . . . . . . . . . . . . . Jumper J5
    AC-500 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `A’ Alarm Contact
    AC-501 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `A’ Alarm Contact and Tamper Switch
    AC-502 . . . . . . . . . . . . . . . . . . . . . . . . . . Form `C’ Alarm Contact and Tamper Switch
    Accessories
    AFT-100 . . . . . . . . . . . . . . . . . . . . . . . . . Glassbreak Simulator

    Distributed by:
    For product information
    www.dsc.com
    Product specifications and availability subject to
    change without notice. Certain product names
    mentioned herein may be trade names and/or
    registered trademarks of other companies.
    ©2005 2005•08

    You might also like