CONTRACTOR MRTDM 204 CONSULTANT

Sieve Analysis of Fine and Course Aggregates

Field Sample No.: - Lab. Sample No.: BA-SA-17 Project:
Date Sampled: 24-07-16G Date Received: 24-07-16G Road No.:

Sampled By: Date Tested: 24-07-16G Road Name:

Title: Mat'ls Lab. Technician Tested By: Quantity: -
Material: A-1-b Materials Title: Mat'ls Lab. Engr. Req. No.: QCT-23
Description: Quality Test for Plating Materials Sampled at: 212+000 RS (Taken form Borrow Pit)

Weight of Sample (grams):

Original Wt,gm 6950.3 Oven Dry Wt,g 6881.3 Wash Oven Dry Wt.,gm 6726.1

Sieve Weight Cum. Wt. Weight Percent Percent

Specifications (%
size Retained Retained Passing Retained Passing Remarks
passing)
(grams) (grams) (grams) (%) (%)
3" Specification
2 1/2"
2" 0.0 0.0 6881.3 0.0 100.0
1 1/2" 542.1 542.1 6339.2 7.9 92.1
1" 1054.6 1596.7 5284.6 23.2 76.8
3/4" 735.6 2332.3 4549.0 33.9 66.1
1/2" 628.4 2960.7 3920.6 43.0 57.0
3/8" 329.5 3290.2 3591.1 47.8 52.2
No.4 409.6 3699.8 3181.5 53.8 46.2
No.8
No. 10 232.0 3931.8 2949.5 57.1 42.9
No. 16
No. 30
No. 40 589.5 4521.3 2360.0 65.7 34.3 50 max
No. 50
No. 80
No. 100
No. 200 2190.2 6711.5 169.8 97.5 2.5 25 max
Pan 14.6 6726.1 A-1-b Materials
Wash Passing No.2 155.2
Total: 6881.3
Remarks: A-1-b Materials
Natural Moisture: 1.0%

Checked By: Title: M.I. Consultant Date: 24-07-16G

Materials Engineer:
Consultant Contractor

Resident Engineer:
 CONTRACTOR MRTDM 204 CONSULTANT

Sieve Analysis of Fine and Course Aggregates

Ditribution: Contractor Resident Engineer Ministry Other (Specify):
 0 MRTDM 204 208, 0
209 & 210
CONTRACTOR CONSULTANT
PLASTIC LIMIT & PLASTICITY INDEX, LIQUID LIMIT
Field Sample No.: - Lab. Sample No.: BA-SA-17 Project: 0
Date Sampled: 24-07-16G Date Received: 24-07-16G Road No.: 0

Sampled By: 0 Date Tested: 24-07-16G Road Name: 0

Title: Mat'ls Lab. Technician Tested By: 0 Quantity: -
Material: A-1-b Materials Title: Mat'ls Lab. Engr. Req. No.: QCT-23
Description: Quality Test for Plating Materials Sampled at: 212+000 RS (Taken form Borrow Pit)
Sample Sieve Analysis
Sieve No. Cum.Ret. Wt. Cum. Wt. Passing % Passing Original wt.: 6950.3
No. 4 3699.8 3181.5 46.2 Oven Dry wt.: 6881.3
No. 10 3931.8 2949.5 42.9 Washed Dry wt.: 6726.1
No. 40 4521.3 2360.0 34.3 Remarks:
No. 200 6711.5 169.8 2.5
Pan 14.6
Wash 155.2
Total 6881.3
Type of Test Liquid Limit ‫لسيولة‬ii‫د ا‬i‫ح‬ ‫نوع التجربة‬
Trial No. 1 2 3 4 5 ‫عدد التجربات‬
Number of Blows 31 23 16 17 ‫عدد الضربات‬
Container No. E ‫رقم الوعاء‬
Weight of Can. g 27.48 ‫وزن الوعاء بالجرام‬
Wt.of Can+Wet Soil.g.
Wt.of Can+Dry Soil. g
N.P. ‫وزن العينة الرطبة مع الوعاء بالجرام‬
‫وزن العينة الجافة مع الوعاء بالجرام‬
Wt. of Water.g ‫وزن الماء بالجرام‬
Wt. of Dry Sample, g. ‫وزن العينة الجافة بالجرام‬
Water Content %. ‫نسبة الرطو بة المؤية‬
Type of Test Plastic Limit ‫لدونة‬ii‫د ا‬i‫ح‬ Liquid Limit Graph
30.0
Trial No. 1 2 ‫عدد التجربات‬

Water Content
29.5
Container No. ‫رقم الوعاء‬
Weight of Can. g ‫وزن الوعاء بالجرام‬ 29.0

Wt.of Can+Wet Soil.g. ‫وزن العينة الرطبة مع الوعاء‬

N.P.
28.5
Wt.of Can+Dry Soil. g ‫وزن العينة الجافة مع الوعاء‬
Wt. of Water.g
Wt. of Dry Sample, g.
‫وزن الماء بالجرام‬
‫وزن العينة الجافة بالجرام‬
N.P. 28.0

27.5

Water Content %. ‫نسبة الرطو بة المؤية‬ 27.0

Plastic Limit ‫مدي الدونة‬ 26.5

26.0
Plasticity Index: N.P. (10 max) ‫ مدي الدونة‬:
100 No. of Blows ‫لضربات‬ii‫عددا‬ 10
Soil Classification: A-1-b Materials ‫ تصنيف التربة‬:
Liquid Limit : N.P. (40 max)
Remarks: ‫ مألحظات‬:

Checked By: Title: M.I. Consultant Date: 24-07-16G

Materials Engineer:
Consultant Contractor

Resident Engineer:
Ditribution: Contractor Resident Engineer Ministry Other (Specify):
 0 0
MRTDM 212
CONTRACTOR CONSULTANT
Moisture - Density Relation of Soils

Field Sample No.: - Lab. Sample No.: BA-SA-17 Project: 0

Date Sampled: 24-07-16G Date Received: 24-07-16G Road No.: 0

Sampled By: 0 Date Tested: 24-07-16G Road Name: 0

Title: Mat'ls Lab. Technician Tested By: 0 Quantity: -
Material: A-1-b Materials Title: Mat'ls Lab. Engr. Req. No.: QCT-23
Description: Quality Test for Plating Materials Sampled at: 212+000 RS (Taken form Borrow Pit)

No.of Layers ‫عدد الطبقا ت‬ No.of Blows ‫عدد الضر با ت‬ Wt.of Hammer i‫ه‬ii‫لمطر ق‬ii‫وزنا‬ Drop Height ‫مسا فه السقو ط‬
5 56 10 lbs. 18"
Mold No ‫رقم القا لب‬ Mold Diameter ‫قطر القا لب‬ Mold Weight ‫وزن القا لب‬ Mold Volume ‫ب‬ii‫لقا ل‬ii‫ ا‬i‫حجم‬
2 15" 4827.6 2117.7
Natural Water Content ‫نسبه الرطو به الطبيعيه‬ Soil Classification i‫ه‬iii‫لطر ب‬ii‫صنيفا‬iii‫ت‬
1.0% A-1-b Materials
Trial No. 1 2 3 4 5 6 7 ‫رقم التجربه‬
Wt. of Mold+ Wet Soil 9212.3 9457.4 9666.4 9612.0 ‫وزن القالب والتربة الرطبة‬
Wt. Wet Soil 4384.7 4629.8 4838.8 4784.4 ‫وزن الطر به الر طبه‬
Wet. Density 2.1 2.2 2.3 2.3 ‫الكثافة الرطبـــــــة‬
Container No. 70 63 68 53 ‫رقم الوعـــــــــــــــــاء‬
Wt. of Wet Soil & Tare 396.1 423.4 391.3 443.2 ‫ التربة الرطبة‬+‫وزن الوعاء‬
Wt. of Dry Soil & Tare 389.5 410.2 372.4 414.6 ‫ التربة الجافة‬+‫وزن الوعاء‬
Moisture Content

Tare Wt. 72.9 96.2 71.2 74.7 ‫وزن الوعــــــــــــــاء‬

Wt. of Water 6.6 13.2 18.9 28.6 ‫وزن المــــــــــــــــــاء‬
Wt. of Dry Soil 316.6 314.0 301.2 339.9 ‫وزن التربة الجافـــة‬
Water Content % 2.1 4.2 6.3 8.4 ‫ نسبة الرطوبة‬%
Dry Density 2.028 2.098 2.150 2.084 ‫الكثافة الجافة‬
D r y D e n sity‫ة‬i‫ف‬i‫ا‬i‫لج‬iiii‫ة ا‬i‫ف‬i‫ا‬i‫ث‬i‫لك‬iiii‫ا‬

Results: ‫النتائج‬
2.17
Max. dry density 2.150 ‫الكثافة الجـافة القصوى‬ 2.15

Optimum Moisture 6.3 ‫نسبة الرطوبة المالئمة‬ 2.13

2.11
2.09
Remarks: :‫مال حظا ت‬ 2.07
2.05
2.03
2.01
1 2 3 4 5 6 7 8 9 10

Moisture Content ‫ة‬i‫ب‬i‫لرطو‬ii‫ة ا‬i‫ب‬i‫س‬ii‫ن‬

Optimu Moisture
Checked By: Title: M.I. Consultant Date: 24-07-16G

Materials Engineer:
Consultant Optimu Moisture Contractor

Resident Engineer:

Ditribution:
Ditribution: Contractor Resident Engineer Ministry Other (Specify):
 0 MRTDM 204 0
CONTRACTOR AASHTO T-13 CONSULTANT
California Bearing Ratio
Field Sample No.: - Lab. Sample No.: BA-SA-17 Project: 0
Date Sampled: 24-07-16G Date Received: 24-07-16G Road No.: 0

Sampled By: 0 Date Tested: 24-07-16G Road Name: 0

Title: Mat'ls Lab. Technician Tested By: 0 Quantity: -
Material: A-1-b Materials Title: Mat'ls Lab. Engr. Req. No.: QCT-23
Description: Quality Test for Plating Materials Sampled at: 212+000 RS (Taken form Borrow Pit)

Molding Moisture Content Density Determination

Test No. 1 2 3 Test No. / Mold No. 4 5 6
Can No. 6 33 98 Volume of Mold cm3 2282.2 2275.6 2264.8
A Mass of Wet Soil + Can g 360.3 466.0 489.0 Mass of Sample + Mold g 11223.9 11209.8 11418.4
B Mass of Dry Soil + Can g 341.4 440.5 461.8 Mass of Mold g 6261.0 6004.1 6126.9
C Massof Moisture (A - B) g 18.9 25.5 27.2 Mass of Sample g 4962.9 5205.7 5291.5
D Mass of Can g 41.4 42.2 41.4 Wet Unit Mass g 2.175 2.288 2.336
E Mass of Dry Soil (B - D) g 300.0 398.3 420.4 Percent Moisture % 6.3 6.4 6.5
F % Moisture (C / E) x 100 % 6.3 6.4 6.5 Dry Unit Mass cm3 2.046 2.150 2.194

Test No.1 Test No.2 Test No.3

Penetration mm

Molded: 24-07-16G Tested: 28-07-16G Molded: 24-07-16G Tested: 28-07-16G Molded: 24-07-16G Tested: 28-07-16G
Total Unit Corr. % Total Unit Corr. % Total Unit Corr. %
Load Load Load Load Load Load Load Load Load CBR
kg kg/cm2 kg/cm2 CBR kg kg/cm2 kg/cm2 CBR kg kg/cm2 kg/cm2
0.00 0 0 0 0 0 0 0 0 0
0.64 10 0.5 2.4 35 1.8 8.2 50 2.6 11.8
1.27 25 1.3 5.9 70 3.6 16.5 118 6.1 27.8
1.90 60 3.1 14.1 119 6.1 28.0 188 9.7 44.2
2.54 80 4.1 18.8 27 160 8.3 37.7 54 254 13.1 59.8 85
3.81 131 6.8 30.8 295 15.2 69.4 395 20.4 93.0
5.08 192 9.9 45.2 43 408 21.1 96.0 91 518 26.8 121.9 116
7.62 285 14.7 67.1 553 28.6 130.1 666 34.4 156.7
U nit L o ad , kg /cm 2

120
110
180 100
160 90
CBR

140 80
120
70
60
100
50
80
40
60
30
40
20
20 10
0
2.030

2.040

2.050

2.060

2.070

2.080

2.090

2.100

2.110

2.120

2.130

2.140

2.150

2.160

2.170

2.180

2.190

2.200

2.210
0. 00

0. 64

1.2 7

1.9 1

2. 54

3. 18

3.8 1

4. 45

5.0 8

5. 72

6.3 5

6. 99

Penetration, mm Density, g/cc

SWELL Date Molded Molded: 24-07-16G

No. of Blows / Layer 10 30 65 Date Tested Tested: 28-07-16G
Mold No. 4 5 6 Max. Dry Density = 2.150 OMC = 6.30
Initial Height,mm. 0.00 0.00 0.00 No. of Blows / Layer 10 30 65
Final Height,mm. 4.00 2.00 3.00 Dry Density, g/cc 2.046 2.150 2.194
Difference 4.00 2.00 3.00 Soaked CBR @ 0.2" 43 91 116
Sample Length, mm. 126.1 126.4 125.8 Dry Density @ 98% Comp. 2.107 g/cc
Percent Swell, % 3.172 1.582 2.385 CBR Value 72

Remarks: Mean Factor = 4.554 Kgf

Checked By: Title: M.I. Consultant Date: 24-07-16G

Materials Engineer:
Consultant Contractor

Resident Engineer:

Ditribution:
Ditribution: Contractor Resident Engineer Ministry Other (Specify):
KINGDOM OF SAUDI ARABIA ‫المملكة العربية السعودية‬
MINISTRY OF TRANSPORT ‫وزارة الن ـقـل‬
MATERIALS RESEARCH AND ‫إدارة البحــوث و المــواد‬
TESTING DEPARTMENT

CONTRACTOR CONSULTANT

Calibration of Mold

Field Sample No.: Remaining Part of Hail - Rafha ( The Part in Hail Portion) 15 kms
212+000 L/S (Main Road Borrow Pit
Sampled at: Stockpile) Date Sampled: 03-05-16G Req. No.: QCT-14
Description: Quality Test for Plating Materials Tested By: E.C. Macatangay/M.E. Lab. Ref No.: BA-SA-10

Proctor Mold C.B.R. Mold #04

1 2 3 1 2 3
Diameter (cm): 15.17 15.25 15.322 Diameter (cm): 15.17 15.18 15.19
Average (cm): 15.25 Average (cm): 15.18

1 2 3 1 2 3
Diameter (cm): 15.17 15.25 15.322 Diameter (cm): 12.63 12.6 12.6
Average (cm): 15.25 Average (cm): 12.61

Weight (Grams): 4827.9 Weight (Grams): 6262.2

Volume (cc): 2117.7 Volume (cc): 2282.2

C.B.R. Mold #05 C.B.R. Mold #06

1 2 3 1 2 3
Diameter (cm): 15.16 15.15 15.12 Diameter (cm): 15.16 15.14 15.13
Average (cm): 15.14 Average (cm): 15.14

1 2 3 1 2 3
Diameter (cm): 12.65 12.64 12.65 Diameter (cm): 12.59 12.58 12.58
Average (cm): 12.65 Average (cm): 12.58

Weight (Grams): 6000.5 Weight (Grams): 6127.6

Volume (cc): 2275.6 Volume (cc): 2264.8

Contractor M.I. Consultant