PHOTOVOLTAIC MODULES Mitsubishi Electric modules

Just the right fit.

TJ Series Performance

PV-TJ235GA6 235Wp
Higher Cell Efficiency
4 bus bar cell
Solder coatingless
Fine grid electrodes

PV-TJ230GA6 230Wp
Optimized tab thickness
Higher Module Output
10×6 cell array
Highly reflective backfilm with wide cell pitch
Cerium-free high transmittance glass

PV-TJ225GA6 225Wp Tight tolerance +/-3%

High power in actual use
(Paired module average exceeds nominal value)

PV-TJ220GA6 220Wp
PV-TJ210GA6 210Wp Reliability
Tougher, more durable I-shaped frame
Static load test of 5400 Pa passed with
protection bar
Double corrosion resistant coating
Max. system voltage 1000V with
four-layer back film
Water drainage structure
Lower frame edge slope
Flexible straight tabs

Best Performance Safety

with High Reliability Quad-layer protective design junction box
Highly heat-resistant bypass diode
Lock mechanism equipped connectors
Conforms with IEC 61215 2nd Edition,
IEC 61730

Easy Installation
Protection plate with cable clip
Grounding lug installable frame
Easier to grip frame
Smoother frame edges

Ecological
Lead-free solder modules
Manufactured in a ISO14001 certified plant
Recyclable steel pallets

All models made in Japan

MITSUBISHI ELECTRIC PHOTOVOLTAIC MODULES

SPECIFICATIONS SHEET
Manufacturer MITSUBISHI ELECTRIC
Model name PV-TJ235GA6 PV-TJ230GA6 PV-TJ225GA6 PV-TJ220GA6 PV-TJ210GA6
Cell type Polycrystalline silicon, 156mm × 156mm
Number of cells 60 cells in a series
Maximum power rating (Pmax) 235W 230W 225W 220W 210W
Warranted minimum Pmax 228.0W 223.1W 218.3W 213.4W 203.7W
Tolerance of maximum power rating +/-3%
Open circuit voltage (Voc) 36.8V 36.6V 36.4V 36.2V 35.8V
Short circuit current (Isc) 8.49A 8.39A 8.30A 8.20A 8.00A
Maximum power voltage (Vmp) 30.5V 30.2V 30.0V 29.7V 29.2V
Maximum power current (Imp) 7.71A 7.62A 7.50A 7.39A 7.19A
Normal operating cell temperature (NOCT) 47.0 ℃
Maximum system voltage 1000V DC
Fuse rating 15A
Dimensions 1658×994×46mm (65.3×39.1×1.81inches)
Weight 20.0kg (44lbs.)
Output terminal (+) 1025mm/(-) 1025mm with MC connector (PV-KBT4 / 6II-UR, PV-KST4 / 6II-UR)
Module efficiency 14.3% 14.0% 13.7% 13.3% 12.7%
Packing condition 2 pcs / 1 carton
Certificates IEC 61215 Second Edition, IEC 61730

DRAWINGS AND DIMENSIONS

Junction box including diodes
994 [39.1] A ø4.09 [ø0.16] (4 places) C
46 [1.81] Rating label
ø 9 [ø0.35] (4 places)
100 [3.94]

25.3 [1.0]
ø 4.09 [ø0.16] (4 places)
500 [19.7]

B 30 [1.18] 23.5[0.93]
1658 [65.3]

1200 [47.2]

(− ) (+)
ø4.09 (ø0.16) (4 places)
D 32 [1.26]

30 [1.18]
500 [19.7]

Drainage hole (8 places)

E E C
B
E F
46 [1.81]
100 [3.94]

F ø 9 [ø0.35]
D 23.5 [0.93]
32[1.26] 30 [1.18]
A F

600 [23.6] Unit : mm [inch ]

ELECTRICAL CHARACTERISTICS
Electrical Performance Temperature dependence of Isc, Voc and Pmax Irradiance dependence of Isc, Voc and Pmax
(Cell temperature : 25℃ ) (Cell temperature : 25℃ )
10 240 140 140

9
1000 W / m2 120 120
200
8
900 W / m2
Isc
Normalized Isc Voc and Pmax (%)

100 100
Normalized Isc, Voc and Pmax (%)

7 800 W / m2
160
6 700 W / m2 Voc Voc
80 80
Current (A)

Power (W)

5 120 Pmax
60 60
4
80
3 40 40
Temp. Coeff. of Isc = +0.054%/ ℃ Isc
2 Current-Voltage
40 Temp. Coeff. of Voc = - 0.343%/ ℃
20 20
Temp. Coeff. of Pmax = - 0.452%/ ℃ Pmax
1 Power-Voltage

0 0 0 0
0 10 20 30 40 -25 0 25 50 75 100 0 200 400 600 800 1000 1200
Voltage (V) Cell temperature ( ℃ ) Irradiance (W/m2)
Case of PV-TJ225GA6

HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
http://Global.MitsubishiElectric.com/solar

Revised Publication,effective Nov.2009.

Superseding Publication,L-175-9-B8423-A of Aug. 2009.
L-175-9-B8423-B NK0911 Printed in Japan (MDOC) Specifications subject to change without notice.