Technical book MI-X medium tonnage range

4 to 5 tons
IC trucks
4000 kg
TECHNICAL SPECS
1.1 Manufacturer MANITOU MANITOU
1.2 Model MI40G MI-X 40D
Specifications

1.3 Power source LPG Diesel

1.4 Driving position Seated Seated

1.5 Nominal capacity Q t 4 4

1.6 Load - Centre of gravity c mm 500 500

1.8 Distance from the load-bearing surface to centre of front axle x mm 550 550
1.9 Wheelbase y mm 2000 2000

2.1 Operating weigth kg 6300 6300

Weights

2.2 Axle load, with load, front / rear kg 9000 / 1300 9000 / 1300

2.3 Axle load, without load, front / rear kg 2800 / 3500 2800 / 3500

3.1 Tyre equipment : cushion (V), superelastic (SE), pneumatic (L) SE SE

Tyres, frame

3.2 Size of front wheels 8.25-15-14PR 8.25-15-14PR

3.3 Size of rear wheels 7.00-12-12PR 7.00-12-12PR

3.5 Number of front wheels (x=drive wheel) / rear wheels 2x / 2 2x / 2

3.6 Front wheel gauge (middle of wheels) b10 mm 1160 1160

3.7 Rear wheel gauge (middle of wheels) b11 mm 1130 1130

4.1 Tilt of mast forwards/backwards (1) _ ` deg 6 / 12 6 / 12

4.2 Height mast lowered h1 mm 2245 2245

4.3 Free lift h2 mm 160 160

4.4 Lift height h3 mm 3000 3000

4.5 Height mast extended h4 mm 4170 4170

4.7 Height of overhead guard h6 mm 2390 2390

4.8 Height of seat h7 mm 1370 1370

4.12 Height of towing bar h10 mm 445 445

4.19 Overall length l1 mm 4290 4290

Dimensions

4.20 Length at fork heels l2 mm 3070 3070

4.21 Total width (overall) b1 mm 1395 1395

4.22 Fork dimensions mm 150 / 50 / 1220 150 / 50 / 1220

4.23 Fork carriage to DIN 15173 A/B FEM 3A FEM 3A

4.24 Width of fork carriage b3 b3 mm 1250 1250

4.31 Ground clearance below mast m1 mm 170 170

4.32 Ground clearance at centre of wheel-base m2 mm 230 230

4.33 Width of aisle for pallet 1000x1200 crossways Ast mm 4530 4530

4.34 Width of aisle for pallet 800x1200 lengthways Ast mm 4330 4330

4.35 Turning radius Wa mm 2780 2780

4.36 Inner turning radius b13 mm 135 135

5.1 Speed of travel laden / unladen km/h 22 / 24 22 / 24

Performances

5.2 Speed of raise laden / unladen m/s 0,46 / 0,48 0,46 / 0,48

5.3 Speed of lowering laden / unladen m/s m/s 0,5 / 0,5 0,5 / 0,5

5.5 Nominal towing power laden / unladen N 38000 / 22000 38000 / 22000

5.7 Gradeability with / without load % 24 / 37 35 / 37

5.10 Service brake Hydraulic Hydraulic

Perkins
7.1 Engine Manufacturer / Type PSI 4.3L
1104D-44 - Stage 3A
Engines

7.2 Power delivery kW 74 56

7.3 Rated speed tr/min 2300 2200

7.4 Number of pistons / Cubic capacity cm3 6 / 4300 4 / 4400

8.2 Operating pressure for attachments bar 160 160

Misc.

8.3 Oil flow for attachments l/min 90 90

- Average weighted acceleration on driver's body (acc to std NF EN 13059) m/s2 1 1

1 Values with duplex mast

Data is based on standard configurations (forks, battery).

Performance data and dimensions are nominal and subject to tolerances.
Specifications are subject to change without notice.
DIMENSIONAL DRAWINGS

MAST AND RATED CAPACITIES

Duplex Total Visibility Duplex Free Lift Triplex Free Lift
MI 4,0 T
DVT30 DVT33 DVT35 DVT37 DVT40 DVT45 DVT50 DLL30 DLL33 DLL35 DLL37 TLL40 TLL43 TLL45 TLL47 TLL50 TLL55 TLL60

h3* Lift height mm 3000 3300 3500 3700 4000 4500 5000 3000 3300 3500 3700 4000 4300 4500 4700 5000 5500 6000

h1 Height mast lowered mm 2245 2395 2495 2595 2795 3070 3345 2226 2376 2476 2576 2080 2180 2248 2310 2410 2575 2790

h2 Free lift mm 160 160 160 160 160 160 160 1364 1514 1614 1714 1229 1329 1395 1459 1559 1724 1939

h4* Height mast extended* mm 4170 4470 4670 4870 5170 5670 6170 4170 4470 4670 4870 5170 5470 5685 5870 6170 6670 7180

Residual capacity without attachment kg 4000 4000 4000 4000 4000 3700 3200 4000 4000 4000 4000 4000 3900 3500 3300 3100 2800 2300

Residual capacity with Integrated sideshift kg 4000 4000 4000 4000 4000 3600 3100 4000 4000 4000 4000 3900 3800 3400 3200 3000 2700 2200

_ ` Tilt of mast forwards / backwards deg 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6/6 6/6 6/6 3/6 3/6

* Without backrest
4500 kg
TECHNICAL SPECS
1.1 Manufacturer MANITOU MANITOU
1.2 Model MI45G MI-X 45D
Specifications

1.3 Power source LPG Diesel

1.4 Driving position Seated Seated

1.5 Nominal capacity Q t 4,5 4,5

1.6 Load - Centre of gravity c mm 500 500

1.8 Distance from the load-bearing surface to centre of front axle x mm 550 550
1.9 Wheelbase y mm 2000 2000

2.1 Operating weigth kg 6500 6500

Weights

2.2 Axle load, with load, front / rear kg 9625 / 1375 9625 / 1375

2.3 Axle load, without load, front / rear kg 2820 / 3680 2820 / 3680

3.1 Tyre equipment : cushion (V), superelastic (SE), pneumatic (L) SE SE

Tyres, frame

3.2 Size of front wheels 300-15-18PR 300-15-18PR

3.3 Size of rear wheels 7.00-12-12PR 7.00-12-12PR

3.5 Number of front wheels (x=drive wheel) / rear wheels 2x / 2 2x / 2

3.6 Front wheel gauge (middle of wheels) b10 mm 1190 1190

3.7 Rear wheel gauge (middle of wheels) b11 mm 1130 1130

4.1 Tilt of mast forwards/backwards (1) _ ` 6 / 12 6 / 12

4.2 Height mast lowered h1 mm 2245 2245

4.3 Free lift h2 mm 160 160

4.4 Lift height h3 mm 3000 3000

4.5 Height mast extended h4 mm 4170 4170

4.7 Height of overhead guard h6 mm 2390 2390

4.8 Height of seat h7 mm 1370 1370

4.12 Height of towing bar h10 mm 445 445

4.19 Overall length l1 mm 4330 4330

Dimensions

4.20 Length at fork heels l2 mm 3110 3110

4.21 Total width (overall) b1 mm 1490 1490

4.22 Fork dimensions mm 150 / 50 / 1220 150 / 50 / 1220

4.23 Fork carriage to DIN 15173 A/B FEM 3A FEM 3A

4.24 Width of fork carriage b3 b3 mm 1250 1250

4.31 Ground clearance below mast m1 mm 170 170

4.32 Ground clearance at centre of wheel-base m2 mm 230 230

4.33 Width of aisle for pallet 1000x1200 crossways Ast mm 4550 4550

4.34 Width of aisle for pallet 800x1200 lengthways Ast mm 4350 4350

4.35 Turning radius Wa mm 2800 2800

4.36 Inner turning radius b13 mm 100 100

5.1 Speed of travel laden / unladen km/h 22 / 24 22 / 24

Performances

5.2 Speed of raise laden / unladen m/s 0,46 / 0,48 0,46 / 0,48

5.3 Speed of lowering laden / unladen m/s m/s 0,5 / 0,5 0,5 / 0,5

5.5 Nominal towing power laden / unladen N 38000 / 22000 38000 / 22000

5.7 Gradeability with / without load % 23 / 34 34 / 34

5.10 Service brake Hydraulic Hydraulic

Perkins
7.1 Engine Manufacturer / Type PSI 4.3L
1104D-44 - Stage 3A
Engines

7.2 Power delivery kW 74 56

7.3 Rated speed tr/min 2300 2200

7.4 Number of pistons / Cubic capacity cm3 6 / 4300 4 / 4400

8.2 Operating pressure for attachments bar 160 160

Misc.

8.3 Oil flow for attachments l/min 90 90

- Average weighted acceleration on driver's body (acc to std NF EN 13059) m/s2 1 1

1 Values with duplex mast

Data is based on standard configurations (forks, battery).

Performance data and dimensions are nominal and subject to tolerances.
Specifications are subject to change without notice.
DIMENSIONAL DRAWINGS

MAST AND RATED CAPACITIES

Duplex Total Visibility Duplex Free Lift Triplex Free Lift
MI 4,5 T
DVT30 DVT33 DVT35 DVT37 DVT40 DVT45 DVT50 DLL30 DLL33 DLL35 DLL37 TLL40 TLL43 TLL45 TLL47 TLL50 TLL55 TLL60

h3* Lift height mm 3000 3300 3500 3700 4000 4500 5000 3000 3300 3500 3700 4000 4300 4500 4700 5000 5500 6000

h1 Height mast lowered mm 2245 2395 2495 2595 2795 3070 3345 2226 2376 2476 2576 2080 2180 2248 2310 2410 2575 2790

h2 Free lift mm 160 160 160 160 160 160 160 1364 1514 1614 1714 1229 1329 1395 1459 1559 1724 1939

h4* Height mast extended* mm 4170 4470 4670 4870 5170 5670 6170 4170 4470 4670 4870 5170 5470 5685 5870 6170 6670 7180
Residual capacity without attachment kg 4500 4500 4500 4500 4500 4100 3700 4500 4500 4500 4500 4450 4300 4100 3900 3600 3100 2500

Residual capacity with Integrated sideshift kg 4500 4500 4500 4500 41500 4000 3600 4500 4500 4500 4500 4350 4200 4000 3800 3500 23000 2400

_ ` Tilt of mast forwards / backwards deg 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6/6 6/6 6/6 3/6 3/6

* Without backrest
5000 kg
TECHNICAL SPECS
1.1 Manufacturer MANITOU MANITOU
1.2 Model MI50G MI-X 50D
Specifications

1.3 Power source LPG Diesel

1.4 Driving position Seated Seated

1.5 Nominal capacity Q t 5 5

1.6 Load - Centre of gravity c mm 500 500

1.8 Distance from the load-bearing surface to centre of front axle x mm 560 560
1.9 Wheelbase y mm 2150 2150

2.1 Operating weigth kg 6800 6800

Weights

2.2 Axle load, with load, front / rear kg 10450 / 1350 10450 / 1350

2.3 Axle load, without load, front / rear kg 3000 / 3800 3000 / 3800

3.1 Tyre equipment : cushion (V), superelastic (SE), pneumatic (L) SE SE

Tyres, frame

3.2 Size of front wheels 300-15-18PR 300-15-18PR

3.3 Size of rear wheels 7.00-12-12PR 7.00-12-12PR

3.5 Number of front wheels (x=drive wheel) / rear wheels 2x / 2 2x / 2

3.6 Front wheel gauge (middle of wheels) b10 mm 1190 1190

3.7 Rear wheel gauge (middle of wheels) b11 mm 1130 1130

4.1 Tilt of mast forwards/backwards (1) _ ` 6 / 12 6 / 12

4.2 Height mast lowered h1 mm 2395 2395

4.3 Free lift h2 mm 160 160

4.4 Lift height h3 mm 3000 3000

4.5 Height mast extended h4 mm 4320 4320

4.7 Height of overhead guard h6 mm 2390 2390

4.8 Height of seat h7 mm 1370 1370

4.12 Height of towing bar h10 mm 445 445

4.19 Overall length l1 mm 4475 4475

Dimensions

4.20 Length at fork heels l2 mm 3255 3255

4.21 Total width (overall) b1 mm 1490 1490

4.22 Fork dimensions mm 150 / 55 / 1220 150 / 55 / 1220

4.23 Fork carriage to DIN 15173 A/B FEM 3A FEM 3A

4.24 Width of fork carriage b3 b3 mm 1250 1250

4.31 Ground clearance below mast m1 mm 170 170

4.32 Ground clearance at centre of wheel-base m2 mm 230 230

4.33 Width of aisle for pallet 1000x1200 crossways Ast mm 4675 4675

4.34 Width of aisle for pallet 800x1200 lengthways Ast mm 4475 4475

4.35 Turning radius Wa mm 2920 2920

4.36 Inner turning radius b13 mm 130 130

5.1 Speed of travel laden / unladen km/h 22 / 24 22 / 24

Performances

5.2 Speed of raise laden / unladen m/s 0,4 / 0,43 0,4 / 0,43

5.3 Speed of lowering laden / unladen m/s m/s 0,5 / 0,5 0,5 / 0,5

5.5 Nominal towing power laden / unladen N 38000 / 23000 38000 / 22000

5.7 Gradeability with / without load % 22 / 32 34 / 32

5.10 Service brake Hydraulic Hydraulic

Perkins
7.1 Engine Manufacturer / Type PSI 4.3L
1104D-44 - Stage 3A
Engines

7.2 Power delivery kW 74 56

7.3 Rated speed tr/min 2300 2200
7.4 Number of pistons / Cubic capacity cm3 6 / 4300 4 / 4400
8.2 Operating pressure for attachments bar 160 160
Misc.

8.3 Oil flow for attachments l/min 90 90

- Average weighted acceleration on driver's body (acc to std NF EN 13059) m/s2 1 1

1 Values with duplex mast

Data is based on standard configurations (forks, battery).

Performance data and dimensions are nominal and subject to tolerances.
Specifications are subject to change without notice.
DIMENSIONAL DRAWINGS

MAST AND RATED CAPACITIES

Duplex Total Visibility Duplex Free Lift Triplex Free Lift
MI 5,0 T
DVT30 DVT33 DVT35 DVT37 DVT40 DVT45 DVT50 DLL30 DLL33 DLL35 DLL37 TLL40 TLL43 TLL45 TLL47 TLL50 TLL55 TLL60

h3* Lift height mm 3000 3300 3500 3700 4000 4500 5000 3000 3300 3500 3700 4000 4300 4500 4700 5000 5500 6000

h1 Height mast lowered mm 2245 2395 2495 2595 2795 3070 3345 2226 2376 2476 2576 2080 2180 2248 2310 2410 2575 2790

h2 Free lift mm 160 160 160 160 160 160 160 1364 1514 1614 1714 1222 1322 1390 1452 1552 1718 1932

h4* Height mast extended* mm 4365 4665 4865 5065 5365 5865 6365 4365 4665 4865 5065 5365 5665 5880 6070 6370 6870 7380

Residual capacity without attachment kg 5000 5000 5000 5000 5000 4700 4100 5000 5000 5000 5000 4850 4700 4600 4300 3900 3400 2700

Residual capacity with Integrated sideshift kg 5000 5000 5000 5000 5000 4600 4000 5000 5000 5000 5000 4750 4600 4500 4200 3800 3300 2600

_ ` Tilt of mast forwards / backwards deg 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6 / 12 6 / 12 6 / 12 6 / 12 6/6 6/6 6/6 6/6 6/6 3/6 3/6

* Without backrest
 Your nearest MANITOU dealer:

Head office
B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France
Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97
www.manitou.com

This brochure describes versions and confi guration options for Manitou products which may be fi tted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to
change the specifi cations shown and described at any time and without prior warning. The manufacturer is not liable for the specifi cations given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from
actual products. List of specifi cations is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure are provided for
information only.
MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes

FT122EN_A_0715_MI-X40to50.pdf