REVISION 0

FAX-L350 H12-1573 230V EC

FAX-L350 H12-1574 230V UK
FAX-L350 H12-1575 230V GER
FAX-L350 H12-1577 230V FRN
FAX-L350 H12-1578 230V AUS
FAX-L350 H12-1579 230V AE
HANDSET KIT E3 H12-3603
HANDSET KIT U3 H12-3614

DEC. 1999 HY8-30AJ-000

COPYRIGHT © 1999 CANON INC. CANON FAX-L350 DEC. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance,
and repair of products. This manual covers all localities where the products are sold. For this reason, there may be
information in this manual that does not apply to your locality.

Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the content of this manual, Canon will release technical information as
the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue
a new editions of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

Trademarks
The product names and company names described in this manual are the registered trademarks of the individual
companies.

Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied,
reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.

Copyright © 1999 by Canon Inc.

CANON INC.
Office Imaging Products Technical Support Dept. 3
5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan

DTP System
The data contained on this manual were created using Apple Macintosh® computers.
Document creation and page layout were performed using Adobe® PageMaker® 6.5J.
Logos and illustrations were created using Macromedia® FreeHand 8.0J.
 I. CONTENTS
1. ILLUSTRATION INDEX
2. PARTS LAYOUT & PARTS LIST
3. TOOL
4. LUBRICATIONS
5. GUIDE TO REPLACEMENT
6. NUMERICAL INDEX

I
 II. ABOUT THIS MANUAL
1. ILLUSTRATION INDEX b) PART NUMBER
For illustration index, the parts layout illustrations in The PART NUMBER column gives the part num-
this parts catalog are listed in abbreviated form in or- bers corresponding to the key numbers. To order a
der of illustration number to identify the pages they part, indicate the part number clearly.
appear on. To find an illustration of a part, see the Note: Parts marked NPN are not service parts.
ILLUSTRATION INDEX.
c) RANK
The service parts with N in the RANK column are
2. PARTS LAYOUT & PARTS LIST order parts.
Parts layout illustration
d) QTY
a) Parts search The QTY column gives the number of parts in the
Find a part from the parts layout illustration and corresponding components layout illustration.
find its key number from the parts list to identify
the part number and name. e) DESCRIPTION
Further, screws, nuts, washers, grip rings, pins and
The DESCRIPTION column gives the part names
spacers are mentioned in the parts list.
in English.
Note: If parts have the same or similar shape but
To order a part, indicate the part name, too.
different specifications, their key number is
assigned to several part numbers and names
in the parts list.
3. TOOL
b) Parts replacement procedure This is a list of tools used for servicing products.
The parts layout illustrations are arranged accord-
ing to the disassembly procedure of the product.
When a unit in the illustration can be disassemble 4. LUBRICATIONS
further, a reference illustration page of the disas- Where grease is to be applied in order to allow mov-
sembly will be included. ing parts to work smoothly, and to increase conductiv-
Parts where grease is to be applied are displayed as ity, the type and amount of grease to be used will be
"Lubrication". When replacing parts, or if grease mentioned.
has accidentally been wiped off, refer to "4". (Lu-
brications), and reapply the grease.
The parts require carefully work are marked "See
page 5-x". So refer to the corresponded page "5".
5. GUIDE TO REPLACEMENT
(GUIDE TO REPLACEMENT). Explains the special cares and cautions for the parts
The letters ( A , B etc.) in the illustration indicate replacement.
the connection locations of cables and screws.

6. NUMERICAL INDEX
Parts list
All the parts listed in this parts catalog are arranged in
a) FIGURE & KEY No. order of part number. You can identify part locations
The FIGURE & KEY No. column corresponds to and names from the NUMERICAL INDEX.
the key numbers assigned to the parts in the parts
layout illustration.
It also corresponds to the part locations printed on
the PC board.

II
This page intentionally left blank

III
FAX-L350 1.ILLUSTRATION INDEX

1. ILLUSTRATION INDEX
FAX-L350 See Page See Page
FIGURE 1 FIGURE 2 COVERS & TRAY ASS'Y
PACKAGE CONTENTS 2-1 2-3

3 2
11 11
4 5
9 1
8
7
10
12

11 14
See page 5-1 10
(FIGURE 2-a)

3
7
13 10
9
8 7
6
4
5

READING ASS'Y & See Page CIRCUIT BOARDS & See Page
FIGURE 3 FIGURE 4
CIRCUIT BOARDS 2-5 COVERS 2-7

24

6 12 1
See page 5-1
(FIGURE 4-a)
13
16 14 2

1 17 15
A SCNT J4

3
B
5 A 23
7 28
5 18
2 B

8 4 4

(FIGURE 4-c)

M
5 See page 5-1
(FIGURE 4-b)
L

I K
J H 26 6
G 27 D
E

A F
3 See page 5-1 26 25
(FIGURE 3-a) N C
D E B G
4 C AF
11
N 25
26
21 J H
22 M
10 19 I
B
See page 5-2 K
20 8
9 L

7
See page 5-2
(FIGURE 4-d)

1-1
 FAX-L350 1.ILLUSTRATION INDEX

See Page See Page

FIGURE 5 COVERS & MAIN FRAME FIGURE 6 CIRCUIT BOARDS
2-9 2-11

Laser
See page 5-2 11
(FIGURE 5-a)
NCU J2
16 10
10
8
15 11
14 9
See page 5-3
(FIGURE 6-c) 1

13
9

See FIGURE 17 12 2 Power supply

for disassembly 6 See page 5-2 See page 5-3 unit J102
(FIGURE 5-b) (FIGURE 6-a) See page 5-3
(FIGURE 6-b)

7 4
INTER FACE J4
21 22 Power supply unit J203
See page 5-4
5 (FIGURE 6-f) 20 See page 5-4
SCNT J2 (FIGURE 6-
MCNT J502 NCU J4 17 Power supply unit J201
18
3
19
2 See page 5-3
(FIGURE 6-
SCNT
J501
8 1 SCNT J10

8 6

4 3
SCNT J8

5
SCNT J7 7

CIRCUIT BOARD & See Page See Page

FIGURE 7 FIGURE 8 READING ASS'Y 1
PAPER PICKUP SECTION 2-13 2-15

25 24 2
4
1

NCU J6 3 See page 5-4

(FIGURE 7-a) 6
NCU J1

SCNT J405
8
2 3
See page 5-5
7
5 15
(FIGURE 7-c)
See page 5-4 7 13 4
(FIGURE 7-b) 8 14
9 5
SCNT J404
1 6
8
29
30
14 14
22
8
16
10 28 14
19 13 28
23
11
24 14
21 9
15 NCU J7 11 10
26 12
17 NCU J8
NCU J9

16
27

16 16
16
18

11
12
20

1-2
FAX-L350 1.ILLUSTRATION INDEX

See Page OPERATION PANEL See Page

FIGURE 9 READING ASS'Y 2
2-17
FIGURE 10 ASS'Y & ADF UPPER 2-19

3
4

2
1

7 6
See page 5-5 30
(FIGURE 9-a)
30 8

28
25 29 11
2
26 9 10
27

30
13
1 23
22
12

21
31
30
18
19 20 30 13
17
30
19 16 14
15 24

See Page See Page

FIGURE 11 ADF LOWER FIGURE 12 SCANNER ASS'Y
2-21 2-23

14
15
2 14 3
2
3 14
18
1 1
See page 5-5
(FIGURE 12-b)

22 4
See page 5-5
(FIGURE 12-a)
20 5
See page 5-6
23 * (FIGURE 12-c)
13 22 4
23
21* 22 5*
6 12 6
12 7
16
8 9
22
9 10
24
15
11
17
14*
6
7
17 16
See FIGURE 18
for disassembly
18 12

8
*=Lubrication
19 22 9
See page 4-1 17 10
See page 5-6 9
(FIGURE 12-d) 11

13

1-3
 FAX-L350 1.ILLUSTRATION INDEX

See Page See Page

FIGURE 13 PAPER FEED SECTION FIGURE 14 DRIVE GEARS
2-25 2-27

22
5

3
7
4
8
2 5
20 6
9 18 9
1 23 6
4
3 4*
7

6
20
12 22
24
13
9 8
22 10
5
21 10 16

16 11 14*
12
17 11*
15 14
19
MCNT J507 19
17 21 15 13*
*=Lubrication
See page 4-2 15
Paper feed motor See page 5-6
18 19
(FIGURE 14-a)

See Page See Page

FIGURE 15 FIXING SECTION 1 FIGURE 16 FIXING SECTION 2
2-29 2-31

11
2 1
8 See page 5-8
See page 5-7
(FIGURE 16-b)
See FIGURE 19 (FIGURE 16-a)
See page 5-6 for disassembly
(FIGURE 15-a) 13
12
9 12
10

3
See page 5-7
(FIGURE 15-b) 13 See FIGURE 20
1 for disassembly
See page 5-7
(FIGURE 15-c)
4*See page 5-7 5
(FIGURE 15-d) 4
3
11
3
2
12 18
13 10
5
14

6
14
9
14
6
15
7 7

5
16 8
*=Lubrication
See page 4-3
7 17

1-4
FAX-L350 1.ILLUSTRATION INDEX

See Page TONER DETECTION See Page

FIGURE 17 ASF ASS'Y FIGURE 18 ASS'Y
2-33 2-35

1 2
4
12 2

3
11
3
7
6 6 5
4

11
11

10
9
8

10

10
7
9
13 8
9

See Page TRANSFER BLOCK See Page

FIGURE 19 DELIEVRY ASS'Y FIGURE 20
2-37 ASS'Y 2-39

7
9

8 2
2
1 3
1

3 5

6
6
8
5
7
9
7

1-5
 FAX-L350 1.ILLUSTRATION INDEX

See Page See Page

FIGURE 21 CASSETTE ASS'Y FIGURE 22 SCNT BOARD ASS'Y
2-41 2-43

2
5

IC2
1
BAT1

JP1 IC50
5 See page 5-8
(FIGURE 22-a)

3
IC10
C11
IC26

See Page See Page

FIGURE 23 PCNT BOARD ASS'Y FIGURE 24 NCU BOARD ASS'Y
2-45 2-47

L1 IC4
T304

TB1

TB303 T1
T302
T303 L52
R319
T301
R328 IC1
R302 TB301
L51

1-6
FAX-L350 1.ILLUSTRATION INDEX

MODULAR BOARD See Page HANDSET KIT E3 See Page

FIGURE 25 ASS'Y 2-49
FIGURE 26 HANDSET KIT U3 2-51

The parts shown at Key No. 4

are not used with this model.
3
1

4 3

See Page
FIGURE 27 TOOLS
3-1

T1
T2

T3 T4

1-7
 FAX-L350 1.ILLUSTRATION INDEX

This page intentionally left blank

1-8
FAX-L350 2.PARTS LAYOUT & PARTS LIST

2. PARTS LAYOUT & PARTS LIST

FIGURE 1 FAX-L350 PACKAGE CONTENTS

3 2
4 5
9 1
8
7
10

11

2-1
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
1 -1 HT1-2148-000 N 1 USER'S GUIDE (ENGLISH) UK AUS AE

HT1-3092-000 N 1 USER'S GUIDE (MODELE FRANCE) FRN

HT1-5068-000 N 1 USER'S GUIDE (DEUTSCH) GER

2 HB1-4360-000 2 TRAY, SUPPORT

3 HB1-4348-000 1 TRAY, DOCUMENT

4 HB1-4349-000 1 TRAY, DOCUMENT,EXTENSION

5 HB1-4357-000 1 LABEL, DESTINATION
6 HG5-2210-000 1 CASSETTE ASS'Y (A4)
7 WT3-5020-000 1 CORD, POWER GER FRN AE

WT3-5023-000 1 CORD, POWER AUS

WT3-5058-000 1 CORD, POWER UK

8 HH2-1914-000 1 MODULAR CORD, 6P UK

HH2-2074-000 1 MODULAR CORD (GERM) GER

HH2-2219-000 1 MODULAR CORD FRN

HH2-2478-000 1 MODULAR CORD, 2P AUS

HH2-2824-000 1 MODULAR CORD, 2P AE

9 HB1-4316-000 1 LABEL, WARNING

10 HA2-0868-000 1 LABEL, MERCURY UK

11 HH4-3369-000 N 1 CD-ROM, DRIVER SOFTWARE

2-2
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 2 COVERS & TRAY ASS'Y

11 11

12

14
See page 5-1 10
(FIGURE 2-a)

3
7
13 10
9
8 7
6
4
5

2-3
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
2-1 HB1-4340-000 1 TRAY, PAPER FEED, EXTENTION
2 HB1-4339-000 1 TRAY, PAPER FEED
3 HB1-4338-000 1 GUIDE, PAPER FEED TRAY
4 HB1-4336-000 1 GUIDE, PAPER FEED,LEFT
5 HB1-4337-000 1 GUIDE, PAPER FEED,RIGHT

6 HB1-4334-000 1 TRAY, PAPER FEED

7 HB1-3008-000 2 RACK
8 HS5-2141-020 1 SPRING, SLIDER
9 HB1-4335-000 1 COVER, GEAR
10 XB4-7300-807 3 SCREW, TAPTIGHT, BINDING HEAD

11 XB3-6301-000 4 SCREW, RS, M3X10

12 HB1-4346-000 1 COVER, UPPER
13 HS5-0254-000 1 GEAR, Z16
14 HB1-4380-000 1 SHEET

2-4
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 3 READING ASS'Y & CIRCUIT BOARDS

1
A

B
5

7
5
2

8 4

A
3 See page 5-1
(FIGURE 3-a)
4

2-5
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
3-1 HB1-4347-000 1 COVER, POWER SUPPLY
2 HH3-5335-000 1 POWER SUPPLY UNIT EC UK GER FRN

HH3-5357-000 1 POWER SUPPLY UNIT AUS AE

3 HB1-4351-000 1 GUIDE, CABLE

4 XB3-6300-800 5 SCREW, RS, M3X8

5 XB1-2300-807 7 SCREW, CROSS-RECESS, FCH

6 XB4-7401-007 2 SCREW, PAN HEAD SELF-TAPPING
7 WT2-5134-000 1 CLAMP, CABLE
8 HG5-2226-000 1 INTERFACE BOARD ASS'Y

2-6
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 4 CIRCUIT BOARDS & COVERS

24

12 1
See page 5-1
(FIGURE 4-a)
13
16 14 2

17 15
SCNT J4

3
A 23
28
18
B

M
5 See page 5-1
(FIGURE 4-b)
L

I K
J H 26 6
G 27 D
E

F
26 25
N C
D E B G
A F
C
11
N 25
26
21 J H
22 M
10 19 I
See page 5-2 K
20 8
(FIGURE 4-c) 9 L

7
See page 5-2
(FIGURE 4-d)

2-7
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
4-1 HB1-4332-000 1 COVER, ROM
2 HB1-4331-000 1 GUIDE, PAPER EJECT
3 HB1-4333-000 1 LEVER
4 HB1-4352-000 1 SUPPORT, LEVER
5 HB1-4353-000 1 SHAFT, SUPPORT,LEVER

6 HG5-2225-000 1 MCNT BOARD ASS'Y

7 HG5-2043-000 1 NCU BOARD ASS'Y EC UK GER FRN

HG5-2048-000 1 NCU BOARD ASS'Y AUS AE

8 HH2-2967-000 1 WIRE, GROUNDING

9 HB1-4359-000 1 COVER, CABLE,MCNT

10 HB1-4288-000 1 GUIDE, CABLE

11 HH7-2418-000 1 SOLENOID
12 HB1-4260-000 1 COVER, OVERFLOW SENSOR
13 HB1-4259-000 1 ARM, OVERFLOW DETECT
14 WG8-5362-000 1 IC, TLP1241, PHOTO-INTERRUPTER

15 HB1-4258-000 1 COVER, PAPER EJECT, FACE DOWN

16 HH2-2952-000 1 CABLE WITH CONNECTOR, 3P
17 HS5-2192-000 1 SPRING
18 HB1-4261-000 2 SHEET
19 WT2-5026-000 1 CLIP, CABLE

20 WT2-0317-000 3 CLIP, CABLE

21 HB1-4361-000 1 SPACER
22 WT2-5629-000 1 CLIP
23 XA9-0476-000 1 SCREW, TP M3X8
24 XB4-7301-007 1 SCREW, TAP TIGHT BH3X10

25 XB1-2300-807 3 SCREW, CROSS-RECESS, FCH

26 XB3-6300-800 5 SCREW, RS, M3X8
27 WT2-5089-000 1 CLAMP
28 HH2-2968-000 1 CABLE WITH CONNECTOR, 3P

2-8
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 5 COVERS & MAIN FRAME

See page 5-2
(FIGURE 5-a)

See FIGURE 17
for disassembly 6 See page 5-2
(FIGURE 5-b)

7 4

3
2

8 1

2-9
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A
N T DESCRIPTION REMARKS
KEY No. K Y
5-1 HB1-4281-000 1 COVER, UPPER,RELEASE
2 HS5-2196-000 2 SPRING, WIRE
3 HS5-6024-000 2 ROLLER, PAPER GUIDE
4 HB1-4280-000 1 COVER, RELEASE
5 HB1-4354-000 1 PIVOT

6 XB3-6300-800 1 SCREW, RS, M3X8

7 HS5-9012-000 4 SCREW, TAP M3X6
8 XB4-7401-007 6 SCREW, PAN HEAD SELF-TAPPING

2-10
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 6 CIRCUIT BOARDS

Laser
11
NCU J2
16 10
10
15 11
14 9
See page 5-3
(FIGURE 6-c) 1

13
9

12 2 Power supply
See page 5-3 unit J102

(FIGURE 6-a) See page 5-3

(FIGURE 6-b)

INTER FACE J4
21 22 Power supply unit J203
See page 5-4
(FIGURE 6-f) 20 See page 5-4
SCNT J2 (FIGURE 6-
MCNT J502 NCU J4 17 Power supply unit J201
18
19
See page 5-3
(FIGURE 6-
SCNT
J501
SCNT J10

8 6

4 3
SCNT J8

5
SCNT J7 7

2-11
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
6-1 HG5-2218-000 1 SCNT BOARD ASS'Y
2 HG5-2221-000 1 PCNT BOARD ASS'Y
3 HB1-4299-000 1 ARM, DETECTION (RPS)
4 WG8-5362-000 1 IC, TLP1241, PHOTO-INTERRUPTER
5 HB1-4300-000 1 MOUNT, ARM,DETECTION

6 HH2-2951-000 1 CABLE WITH CONNECTOR, 3P

7 HH7-2426-000 1 SPEAKER UNIT
8 HB1-3023-000 1 HOLDER, SPEAKER
9 XA9-0863-000 5 SCREW, TAP M3X6
10 XB3-6300-800 4 SCREW, RS, M3X8

11 XB4-7401-007 4 SCREW, PAN HEAD SELF-TAPPING

12 RF5-2382-000 1 COVER, WATERPROOF
13 HH2-2954-000 1 CABLE WITH CONNECTOR, 10P
14 HH2-2959-000 1 CABLE WITH CONNECTOR, 9P
15 HH2-2964-000 1 CABLE WITH CONNECTOR, 6P

16 HH9-0259-000 1 CABLE WITH CONNECTOR, 11P

17 HB1-4295-000 1 GUIDE, CABLE,SCNT
18 HB1-4383-000 1 SHEET
19 HH2-2946-000 1 CABLE, FLAT, 21P
20 HH2-2949-000 1 CABLE, FLAT, 20P

21 HH2-2950-000 1 CABLE, FLAT, 16P

22 HH2-2962-000 1 CABLE WITH CONNECTOR, 2P

2-12
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 7 CIRCUIT BOARD & PAPER PICKUP SECTION

25 24
4

NCU J6 3 See page 5-4

(FIGURE 7-a) 6
NCU J1

SCNT J405
8
2
See page 5-5
5 (FIGURE 7-c)
See page 5-4 7
(FIGURE 7-b) 8
9
SCNT J404
1

29
30
22

10 28
19 13 28
23
11
24 14
21
15 NCU J7 11
26 12
17 NCU J8
NCU J9

16
27

18

20

2-13
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
7-1 HB1-4326-000 1 GUIDE, CABLE,PCNT
2 HB1-4369-000 2 SHEET
3 HH2-2947-000 1 CABLE, FLAT, 14P
4 HB1-4301-000 1 GUIDE, CABLE,NCU
5 HH2-2948-000 1 CABLE, FLAT, 23P

6 HB1-4296-000 1 GUIDE, CASSETTE,PAPER FEED

7 HB1-4297-000 1 PAD, SEPARATION
8 HB1-4298-000 2 SUPPORT, SEPARATION PAD
9 HS5-2198-000 1 SPRING, COMPRESSION
10 HB1-4289-000 1 MOUNT, SHAFT

11 HS5-1044-000 2 BUSHING
12 HB1-1886-020 1 ARM, LIFTING
13 HB1-1885-000 1 LEVER, LIFTING
14 HS5-2197-000 1 SPRING, COMPRESSION
15 HG5-2223-000 1 MODULAR BOARD ASS'Y EC UK GER FRN

HG5-2233-000 1 MODULAR BOARD ASS'Y AUS AE

16 WC4-5052-000 1 MICRO SWITCH

17 HH2-2992-000 1 CABLE WITH CONNECTOR, 2P
18 HB1-4291-000 1 COVER, BOTTOM
19 RB1-2152-000 1 ROLLER, ARM

20 QB1-3593-000 2 FOOT, PRINTER

21 HB1-4368-000 1 COVER, SENSOR
22 HB1-4361-000 5 SPACER
23 XB4-7300-807 2 SCREW, TAP TIGHT, BINDING HEAD
24 XB4-7401-007 3 SCREW, PAN HEAD SELF-TAPPING

25 XB4-7402-009 2 SCREW, SELF-TAPPING, M4X20

26 XB6-7300-607 1 SCREW, TP, M3X6
27 XB6-7301-205 2 SCREW, TP, M3X12
28 XB4-7401-209 2 SCREW, BINDING HEAD, SELF-TPG
29 WT2-5034-000 1 BUSHING

30 WT2-0317-000 1 CLIP, CABLE

2-14
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 8 READING ASS'Y 1

3
7
15
13 4
14
5
6
8

14 14

8
16
14

9
10

16 16
16

11
12

2-15
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
8-1 HB1-4327-000 1 GUIDE, DOCUMENT FEED,LEFT
2 HB1-4328-000 1 GUIDE, DOCUMENT FEED,RIGHT
3 HS5-2141-020 1 SPRING, SLIDER
4 HB1-2883-000 2 SLIDER, RACK
5 HS5-0238-020 1 GEAR, Z16

6 HB1-4335-000 1 COVER, GEAR

7 HB1-4330-000 1 GUIDE, PAPER EJECT
8 HB1-4362-000 2 SHEET
9 HB1-4323-000 1 COVER, FRONT
10 HB1-4325-000 1 LEVER, ADF RELEASE

11 HB1-4324-000 1 DUCT, AIR

12 HB1-4322-000 1 COVER, GEAR
13 XB4-7300-807 1 SCREW, TAP TIGHT, BINDING HEAD
14 WT8-0053-000 4 REVET
15 HB1-4329-000 1 COVER, DOCUMENT

16 XB4-7301-009 6 SCREW, BINDING HEAD SELF-TPG

2-16
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 9 READING ASS'Y 2

See page 5-5

(FIGURE 9-a)

2-17
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
9-1 HB1-4321-000 1 COVER, DOCUMENT GUIDE,LOWER
2 HB1-2867-000 1 STOPPER, OPERATION PANEL

2-18
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 10 OPERATION PANEL ASS'Y & ADF UPPER

3
4

2
1

7 6
30
30 8

28
25 29 11
26 9 10
27

30
13

23
22
12

21
31
30
18
19 20 30 13
17
30
19 16 14
15 24

2-19
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
10 - 1 HB1-4373-000 1 COVER, ONE TOUCH DAIL
2 HG5-2232-000 1 OPERATION PANEL UNIT
3 HB1-4371-000 1 SHEET, OPERATION PANEL UK AUS AE

HB1-4376-000 1 SHEET, OPERATION PANEL GER

HB1-4378-000 1 SHEET, OPERATION PANEL FRN

4 HB1-4372-000 1 SHEET, FUNCTION UK AUS AE

HB1-4377-000 1 SHEET, FUNCTION GER

HB1-4379-000 1 SHEET, FUNCTION FRN

5 HB1-4318-000 1 HOLDER, SENSOR

6 HH2-2978-000 1 CABLE WITH CONNECTOR, 3P

7 WG8-5362-000 1 IC, TLP1241, PHOTO-INTERRUPTER

8 HG5-1308-000 1 SEPARATION GUIDE ASS'Y
9 HS5-2078-000 1 SPRING
10 HB1-4311-000 1 ARM, DETECTION (DS)
11 HB1-4317-000 1 STOPPER, DOCUMENT

12 HB1-4309-000 1 FRAME, ADF UPPER

13 HB1-2866-000 2 PLATE, PRESSURE
14 HS5-2199-000 1 PLATE, PRESSURE
15 HF5-0399-000 1 WHITE SHEET UNIT
16 HS5-2129-000 3 SPRING, WHITE SHEET

17 HB1-4365-000 1 SHEET, BRUSH, STATIC DISCHARGE

18 HB1-4072-000 1 BRUSH, STATIC DISCHARGE
19 HB1-4313-000 2 GUIDE, DOCUMENT EJECT
20 HS5-6069-000 1 ROLLER, DELIVERY
21 HB1-4314-000 1 LEVER, DOCUMENT RELEASE

22 HB1-4315-000 1 CLAW, DOCUMENT RELEASE

23 HS5-2200-000 1 SPRING
24 HH2-2958-000 1 WIRE, GROUNDING
25 HB1-2864-000 1 ROLLER, BACK UP
26 HS5-6023-030 1 ROLLER, BACK UP

27 HB1-4310-000 1 ARM, DETECTION (DES)

28 HH2-2966-000 1 WIRE, GROUNDING
29 HH2-2953-000 1 CABLE WITH CONNECTOR, 6P
30 XB4-7300-807 6 SCREW, TAP TIGHT, BINDING HEAD
31 XA9-0476-000 1 SCREW, TP M3X8

2-20
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 11 ADF LOWER

2
3
1

22

20
23 *
13 22 4
23
21* 22 5*
6
12 7
16
8 9
22
9 10
24
15 11
14*

17
18 12

*=Lubrication
19 22
See page 4-1 17

2-21
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
11 -1 HH7-2424-000 1 CONTACT SENSOR UNIT
2 HH2-2961-000 1 CABLE, FLAT, 12P
3 HH2-2960-000 1 CABLE WITH CONNECTOR, 9P
4 HB1-3697-000 1 ROLLER, SEPARATION
5 HB1-1779-000 1 SPACER

6 HS5-2077-000 1 SPRING, CLUTCH

7 HS5-0314-000 1 GEAR, Z40D
8 HB1-4307-000 1 ROLLER, DOCUMENT FEED
9 HS1-1063-000 2 BUSHING
10 HS5-0315-000 1 GEAR, Z21D

11 HS5-0316-000 1 GEAR, Z21/28B

12 HF5-0544-000 2 LOCK, OPERATION PANEL
13 HH7-2419-000 1 MOTOR, DOCUMENT FEED
14 HS5-0312-000 1 GEAR, Z59D
15 HS5-0313-000 1 GEAR, Z21/Z54

16 HS5-0311-000 1 GEAR, Z82D

17 HS5-1091-000 2 BUSHING
18 HF5-0543-000 1 ROLLER, DOCUMENT EJECT
19 HS5-1090-000 1 BUSHING
20 HH2-2965-000 1 WIRE, GROUNDING

21 HB1-3036-000 1 PLATE, GROUNDING

22 XB4-7300-807 7 SCREW, TAP TIGHT, BINDING HEAD
23 XB1-2300-407 3 SCREW, BH3X4 (S)
24 WT2-0317-000 1 CLIP, CABLE

2-22
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 12 SCANNER ASS'Y

14
15
14 3
2
14
18
1
See page 5-5
(FIGURE 12-b)

4
See page 5-5
(FIGURE 12-a)
5
See page 5-6
(FIGURE 12-c)

12 6

17

6
7
See FIGURE 18
16 for disassembly

8
9
10
See page 5-6 9
(FIGURE 12-d) 11

13

2-23
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
12 - 1 HG5-2180-000 1 ACTUATOR UNIT
2 HB1-3018-000 1 STOPPER, TAPE
3 HB1-3418-000 1 SPRING, GROUNDING
4 RG9-1281-000 1 SCANNER ASS'Y
5 RG5-3453-000 1 SWITCH LEVER ASS'Y

6 HS5-1042-000 2 BUSH
7 HB1-4285-000 1 CLUTCH, PAPER PICK-UP
8 RB1-7193-000 1 CAM, LEFT
9 HS5-6068-000 2 ROLLER, SUB
10 HF5-0547-000 1 PICK-UP ROLLER UNIT

11 RB1-7194-000 1 CAM, RIGHT

12 FA3-8727-000 1 RETAINING RING
13 XD9-0159-000 3 PIN, DOWEL
14 XB6-7300-807 4 SCREW, TP, M3X8
15 XB4-7300-807 1 SCREW, TAP TIGHT, BINDING HEAD

16 XB3-6300-800 2 SCREW, RS, M3X8

17 WT2-0317-000 1 CLIP, CABLE
18 HB1-4370-000 1 PLATE, SCANNER

2-24
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 13 PAPER FEED SECTION

22
5

2
20 6

1 23
4
3
7

6
20
12 22
24
13
9 8
22
5
21 10

16 11
15 14
19
MCNT J507

17 21

Paper feed motor

18

2-25
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A
N T DESCRIPTION REMARKS
KEY No. K Y
13 - 1 HH7-2415-000 1 SOLENOID
2 HS5-0310-000 1 GEAR, Z18
3 HG5-2186-000 1 CAM UNIT
4 XD9-0108-000 1 PIN, DOWEL
5 HS5-1089-000 2 BUSHING

6 FA3-8727-000 2 RETAINING RING

7 HB1-4283-000 1 ROLLER, FEED
8 HB1-4286-000 1 CLUTCH
9 HB1-4282-000 1 ROLLER, PICK-UP
10 XD2-1100-642 1 RING, E

11 HB1-4284-000 1 PLATE, PAPER GUIDE

12 HB1-4279-000 1 GUIDE, PAPER FEED
13 RB1-7172-000 1 SPRING, GROUNDING
14 HH2-2957-000 1 CABLE WITH CONNECTOR, 9P
15 HB1-1867-000 1 ARM, DETECTION (PES)

16 RB1-7205-000 1 SPRING, TORSION

17 HB1-1868-020 1 HOLDER, PES
18 WG8-5362-000 1 IC, TLP1241, PHOTO-INTERRUPTER
19 WT2-0434-000 1 CLIP
20 HS5-1042-000 2 BUSH

21 HS5-9012-000 2 SCREW, TAP M3X6

22 FA4-1159-000 3 RETAINING RING
23 XB1-2300-807 1 SCREW, CROSS-RECESS, FCH
24 HB1-4384-000 1 SHEET

2-26
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 14 DRIVE GEARS

3
7
4
8
5
9 18 9
6
4*

10
16

14*
12
17 11*

19
15 13*
*=Lubrication
See page 4-2 15
See page 5-6 19
(FIGURE 14-a)

2-27
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A
N T DESCRIPTION REMARKS
KEY No. K Y
14 - 1 RB1-8170-000 1 LEVER, RELEASE, D
2 RF5-1513-000 1 ARM, SWING
3 RS5-0791-000 1 GEAR, 36T
4 RS5-0793-000 2 GEAR, 22T
5 RS5-0794-000 1 GEAR, 24T

6 RS5-0798-000 1 GEAR, 15T

7 RS5-0789-000 1 GEAR, 37T
8 RS5-0799-000 1 GEAR, 51T/17T
9 FA3-8727-000 2 RETAINING RING
10 RS5-0790-000 1 GEAR, 54T/19T

11 RS5-0788-000 1 GEAR, 32T/93T

12 HS5-0148-000 1 GEAR, Z47
13 RS6-0380-000 1 GEAR, 23T/98T
14 HS5-0317-000 1 GEAR, Z28
15 HB1-4277-000 2 ROLLER, FEED

16 HH7-2422-000 1 MOTOR, MAIN

17 XD9-0121-000 2 PIN, DOWEL
18 HS5-1042-000 1 BUSH
19 XB6-7300-807 4 SCREW, TP, M3X8

2-28
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 15 FIXING SECTION 1

11
8
See FIGURE 19
See page 5-6 for disassembly
(FIGURE 15-a)

9
10

3
See page 5-7
(FIGURE 15-b)
1
See page 5-7
(FIGURE 15-c)
4*See page 5-7
(FIGURE 15-d)

2
12 18
13

14
6
15
7

5
16
*=Lubrication
See page 4-3
7 17

2-29
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
15 - 1 RB1-7247-000 1 GUIDE, PAPER
2 RB1-7341-030 1 GUIDE, SUB, CARTRIDGE, RIGHT
3 RG5-3463-000 1 FIXING ASS'Y
4 RF5-2364-000 1 ROLLER, PRESSURE
5 RF5-2367-000 1 ROLLER, FEEDER

6 RS5-0797-000 1 GEAR, 18T

7 RB1-7288-020 2 BUSHING
8 XB6-7300-807 2 SCREW, TP, M3X8
9 RB1-7257-000 2 BUSHING, SPRING
10 RS5-2508-000 2 SPRING, COMPRESSION

11 XB3-6300-800 2 SCREW, RS, M3X8

12 RB1-7293-030 1 LEVER, SENSOR
13 RB1-7294-000 1 SPRING, TORSION
14 RF5-2368-000 1 ROLLER, FACE UP
15 RB2-1690-000 1 BUSHING

16 RG5-3476-030 1 FLAPPER
17 WT2-5034-000 1 BUSHING
18 WT2-0317-000 1 CLIP, CABLE

2-30
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 16 FIXING SECTION 2

2 1
See page 5-8
See page 5-7
(FIGURE 16-b)
(FIGURE 16-a)

13
12
12

13 See FIGURE 20
for disassembly

5
4
3
11
3

10
5
14

6
14
9

2-31
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
16 - 1 RF5-2358-000 1 GUIDE, TRANSFER
2 RF5-1534-000 1 ROLLER, TRANSFER
3 HB1-4287-000 2 STOPPER, CARTRIDGE
4 HB1-1848-000 1 STOP, CARTRIDGE
5 HF5-0540-000 2 LOCK, RELEASE COVER

6 RB1-7129-000 1 SPRING, GROUNDING

7 RF5-1533-000 1 PLATE, COMMUNITY
8 RF5-1515-020 1 GUIDE, CARTRIDGE
9 RF5-1514-020 1 GUIDE, CARTRIDGE,LEFT
10 WT2-5062-000 1 BUSHING

11 VS1-5057-002 1 CONNECTOR, 2P
12 RB1-7246-000 2 BUSHING
13 XB3-6300-800 3 SCREW, RS, M3X8
14 XA9-0863-000 2 SCREW, TAP M3X6

2-32
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 17 ASF ASS'Y

1 2

12

6 4

11

10
9

7
13 8

2-33
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
17 - 1 HB1-4268-000 1 ARM, PLATE,RIGHT
2 RB1-7185-000 1 ARM, PLATE, LEFT
3 HS5-2193-000 1 SPRING, COMPRESSION
4 HB1-4265-000 1 PAD, SEPARATION
5 RS5-2502-000 1 SPRING, COMPRESSION

6 HB1-4266-000 1 ARM, DETECTION

7 HH2-2955-000 1 CABLE WITH CONNECTOR, 3P
8 HB1-4267-000 1 MOUNT, ARM,DETECTION
9 WG8-5362-000 1 PHOTO-INTERRUPTER TLP1241
10 RB1-7206-000 1 HOLDER, ARM

11 HF5-0541-000 1 PICK-UP FRAME UNIT

12 HF5-0542-000 1 PLATE, MIDDLE
13 XB4-7300-807 1 SCREW, TAP TIGHT, BINDING HEAD

2-34
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 18 TONER DETECTION ASS'Y

4
2

3
11

7
6 5

11

10

10

2-35
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
18 - 1 HB1-4367-000 1 SHEET
2 HB1-3012-000 1 SUPPORTER, TONER SENSOR
3 HH7-2416-000 1 TONER SENSOR ASS'Y
4 HB1-3011-040 1 HOLDER, TONER SENSOR
5 HS5-2194-000 1 SPRING

6 HB1-4271-000 1 SUPPORT, TONER SENSOR

7 HB1-4273-000 1 GUIDE, TONER SENSOR
8 HB1-4272-000 1 GUIDE, PAPER FEED
9 HS5-2075-000 2 SPRING, PRESSURE
10 HS5-6024-000 2 ROLLER, PAPER GUIDE

11 XB4-7300-807 2 SCREW, TAP TIGHT, BINDING HEAD

2-36
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 19 DELIEVRY ASS'Y

8
2
1

2-37
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
19 - 1 RG5-3478-000 2 SPUR ASS'Y
2 RG5-3479-000 2 SPUR ASS'Y
3 RB1-7284-020 4 ROLLER, FACE DOWN
4 RB1-7286-000 4 SPRING, WIRE
5 RB2-1685-000 2 ROLLER, FACE UP

6 RB1-7287-000 2 SPRING, WIRE

7 RS5-8543-020 1 LABEL, "WARNING HIGH TEMP"
8 RB2-1686-000 1 FRAME
9 RB1-7334-000 1 GUIDE, JAMMED PAPER REMOVAL

2-38
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 20 TRANSFER BLOCK ASS'Y

2
3
1

4
5

2-39
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
20 - 1 RB2-1657-000 1 ELIMINATOR, STATIC CHARGE
2 RB2-1655-000 1 BUSHING
3 RS5-2504-000 1 SPRING, COMPRESSION
4 RB2-1656-000 1 BUSHING
5 RS5-2505-000 1 SPRING, COMPRESSION

6 RB1-7237-000 1 PIN, CONTACT

7 RS5-2512-000 2 SPRING, COMPRESSION
8 RB1-7236-000 1 PIN, CONTACT
9 HB1-2580-000 5 TR SLOPE

2-40
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 21 CASSETTE ASS'Y

2
5

2-41
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
21 - 1 HF5-0545-000 1 GUIDE, PAPER WIDTH,LEFT
2 RB2-1706-000 1 SHEET, SEPARATION
3 HB1-4344-000 1 GUIDE, PAPER WIDTH,RIGHT
4 HB1-4343-000 1 BODY, CASSETTE
5 XB4-7400-807 2 SCREW,TAPPING,TRUSS HEAD,M4X8

2-42
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 22 SCNT BOARD ASS'Y

IC2

BAT1

JP1 IC50
See page 5-8
(FIGURE 22-a)

IC10
C11 IC26

2-43
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
22 - BAT1 WK1-5130-000 1 BATTERY, LITHIUM, CR2032/1HS
C11 WK1-5131-000 1 CAPACITOR, ELE, DOUBLE LAYER
IC2 HH4-3340-000 1 IC, MR27V1652D, MASK-ROM
IC10 HH4-3236-000 1 IC, HG73C051FD, GATE-ARRAY
IC26 HH4-3300-000 1 IC, UPD703102GJ-A33-024-8EU

IC501 HH4-3235-000 1 IC, MBCU34102-105, MCU

JP1 VS1-5888-002 1 CONNECTOR, PIN 2P

2-44
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 23 PCNT BOARD ASS'Y

L1
T304

TB1

TB303
T302
T303
R319
T301
R328
R302 TB301

2-45
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A
N T DESCRIPTION REMARKS
KEY No. K Y
23 - L1 HH3-5348-000 1 INDUCTOR
R302 RH6-3384-000 1 RESISTOR, 3MOHM, 0.5W
R319 RH6-3384-000 1 RESISTOR, 3MOHM, 0.5W
R328 RH6-3858-000 1 RESISTOR, METAL
T301 HH3-5338-000 1 TRANSFORMER, INVERTER, 22VA

T302 HH3-5337-000 1 TRANSFORMER, INVERTER, 6.3VA

T303 HH3-5336-000 1 TRANSFORMER, INVERTER, 1.5VA
T304 HH3-5336-000 1 TRANSFORMER, INVERTER, 1.5VA
TB1 HH2-2971-000 1 CABLE WITH CONNECTOR, 2P
TB301 RH2-5330-000 1 CONNECTOR, 2P

TB303 RH2-5330-000 1 CONNECTOR, 2P

2-46
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 24 NCU BOARD ASS'Y

IC4

T1

L52

IC1
L51

2-47
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
24 - IC1 HH7-2430-000 1 IC, HFS113F022A1, HYBRID
IC4 HH7-2431-000 1 IC, H8D2965, HYBRID
L51 HH7-2240-000 1 FIXED INDUCTOR TSU-FL 474
L52 HH7-2240-000 1 FIXED INDUCTOR TSU-FL 474
T1 HH7-2427-000 1 TRANSFORMER, AUDIO

2-48
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 25 MODULAR BOARD ASS'Y

2-49
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
PART No. A
& N T DESCRIPTION REMARKS
KEY No. K Y
25 - 1 HH2-2969-000 1 CABLE WITH CONNECTOR, 6P
2 HH2-2977-000 1 CABLE WITH CONNECTOR, 9P
3 WT2-0317-000 1 CLIP, CABLE

2-50
FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE 26 HANDSET KIT E3

HANDSET KIT U3
The parts shown at Key No. 4
are not used with this model.

4 3

2-51
 FAX-L350 2.PARTS LAYOUT & PARTS LIST

FIGURE R Q
& PART No. A
N T DESCRIPTION REMARKS
KEY No. K Y
26 - 1 HH7-2408-000 1 HANDSET UNIT EC

HH7-2460-000 1 HANDSET UNIT UK

2 HB1-1264-000 1 HOLDER, HANDSET CRADLE EC UK

3 WT2-5465-000 2 RIVET EC UK

4 NPN 2 SCREW

2-52
FAX-L350 3.TOOL

3. TOOL
FIGURE 27 TOOLS

T1
T2

T3 T4

3-1
 FAX-L350 3.TOOL

FIGURE R Q
& PART No. A T DESCRIPTION REMARKS
N
KEY No. K Y
27 - T1 HY9-0007-000 1 LUBE, MOLYKOTE EM-50L, GREASE
T2 CK-8006-000 1 ELECTRICITY GREASE (IF-20)
T3 CK-0451-000 1 LUBE, UNIWAY 68, OIL
T4 HY9-0022-000 1 IC-REMOVING TOOL (24-64P)

3-2
FAX-L350 4.LUBRICATIONS

4. LUBRICATIONS
4.1 Locations
Some parts are lubricated with grease to ensure smooth operation and to increase conductivity. If lubricated parts are
replaced or grease is removed, grease must be reapplied.

4.1.1 ADF LOWER

IF-20
Approx. 20-40mg

UNIWAY 68
(Suitable Amount)

MOLYKOTE EM-50L
Approx. 20-40mg

See FIGURE 11 for the disassembly

4-1
 FAX-L350 4.LUBRICATIONS

4.1.2 DRIVE GEARS

MOLYKOTE EM-50L
Approx . 20-30mg

MOLYKOTE EM-50L

MOLYKOTE EM-50L
Approx . 40-60mg
MOLYKOTE EM-50L
Approx . 20-30mg

See FIGURE 14 for the disassembly

4-2
FAX-L350 4.LUBRICATIONS

4.1.3 PRESSURE ROLLER & SEPARATION GUIDE ASS'Y

MOLYKOTE EM-50L
Approx. 100mg
IF-20
Approx. 20-40mg

See FIGURE 15 for the disassembly

4-3
 FAX-L350 4.LUBRICATIONS

This page intentionally left blank

4-4
FAX-L350 5.GUIDE TO REPLACEMENT

5. GUIDE TO REPLACEMENT
See Page See Page
FIGURE 2-a FIGURE 3-a
2-3 2-5

Flush.

Be sure to attach the sheet to the back of the front cover. Route the cables as shown in the figure.

See Page See Page

FIGURE 4-a FIGURE 4-b
2-7 2-7

ROM COVER

The ROM is located under the ROM cover.

To remove the ROM cover, push where indicated by an ar- Take care when removing or mounting the lever.
row. To remove the lever, work as shown in the figure.

5-1
 FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 4-c FIGURE 4-d
2-7 2-7

J7

AR2

When attaching/removing the J7 connector, hold as shown

Route the cables as indicated. in the figure and do not put pressure on the AR2 arrester.

See Page See Page

FIGURE 5-a FIGURE 5-b
2-9 2-9

Avoid.

Spring

When lifting, be sure to hold as shown in the figure. Be sure not to leave out the spring.

5-2
FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 6-a FIGURE 6-b
2-11 2-11

2
J102

1
J2

To attach the WATER PROOF COVER to the PCNT board, Be sure not to leave out the cable. Work as shown in the
slide it into position (1) and press down to secure (2). figure.

See Page See Page

FIGURE 6-c FIGURE 6-d
2-11 2-11

398 mm
8 mm

22 mm
266 mm

35 mm

15 mm

124 mm

Attach double-sided adhesive tape

to the underside of the shaded area ■.
Route the cables as shown in the figure. Fold the flat cable as shown in the figure.

5-3
 FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 6-e FIGURE 6-f
2-11 2-11

310 mm
320 mm

20 mm

60mm
25 mm
290 mm

235 mm

Fold the flat cable as shown in the figure. Fold the flat cable as shown in the figure.

See Page See Page

FIGURE 7-a FIGURE 7-b
2-13 2-13

355 mm 362 mm
25 mm
30 mm

180 mm
175 mm
45 mm

20 mm

70 mm 35 mm 70 mm 67 mm

Fold the flat cable as shown in the figure. Fold the flat cable as shown in the figure.

5-4
FAX-L350 5.GUIDE TO REPLACEMENT

FIGURE 7-c See Page See Page

2-13
FIGURE 9-a
2-17

SHEET

STOPPER

TAB

Attach the sheet over the hole in the separation pad as shown To open the control panel, turn the stopper to the left and
in the figure. pull out to the front, then shift the tab as shown in the figure.

See Page See Page

FIGURE 12-a FIGURE 12-b
2-23 2-23

SCREW

Do not loosen or remove the two black screws on the Attach the ACTUATOR BASE retaining clip to the frame as
SCANNER ASS'Y. shown by the arrow.

5-5
 FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 12-c 2-23
FIGURE 12-d 2-23

To attach the SWITCH LEVER ASS'Y: with portion (a) lifted

up, and while continuing to press upward on pin (b), rotate When assembling the PICKUP ROLLER ASS'Y, be careful
the ass'y in the arrow's direction. that the cams and roller are correetiy aligned.

See Page See Page

FIGURE 14-a FIGURE 15-a
2-27 2-29

When mounting the feed roller, be sure to pay attention to When removing the PRESSURE PLATE, use a fine
its orientation. screwdriver to press the clips outward and unhook them.

5-6
FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 15-b FIGURE 15-c
2-29 2-29

FILM

1
2
3
45
6
6
5
4
3
2
1

HOOK

Be careful not to touch hte film on the FIXING ASS'Y with Insert a fine screwdriver into the sixth holes from both left
your hands. and right ends to unhook the retaining clips.

See Page See Page

FIGURE 15-d 2-29
FIGURE 16-a
2-31

RUBBER SPONGE

Do not touch the rubber portion of the PRESSURE ROLLER Do not touch the sponge portion of the TRANSFER ROLLER
with your hands. with your hands.

5-7
 FAX-L350 5.GUIDE TO REPLACEMENT

See Page See Page

FIGURE 16-b FIGURE 22-a
2-31 2-43

SHORT PLUG

The service part version of the SCNT board has a SHORT

PLUG on one of the pins. When replacing the SCNT board,
cover both pins with the plug. If both pins of the SCNT board
service part are already by the plug, DO NOT INSTALL THE
PART; the backup battery may be significantly depleted.
When removing the TRANSFER GUIDE, use a fine When installing, be careful to avoid electrostatic damage to
screwdriver to unhook the retaining clips. board components.

5-8
FAX-L350 6.NUMERICAL INDEX

6. NUMERICAL INDEX
PART FIGURE & PART FIGURE &
DESCRIPTION DESCRIPTION
NUMBER KEY NO. NUMBER KEY NO.
CK-0451-000 27 - T3 LUBE, UNIWAY 68, OIL HB1-4296-000 7-6 GUIDE, CASSETTE,PAPER FEED
CK-8006-000 27 - T2 ELECTRICITY GREASE (IF-20) HB1-4297-000 7-7 PAD, SEPARATION
FA3-8727-000 12 - 12 RETAINING RING HB1-4298-000 7-8 SUPPORT, SEPARATION PAD
13 - 6 HB1-4299-000 6-3 ARM, DETECTION (RPS)
14 - 9 HB1-4300-000 6-5 MOUNT, ARM,DETECTION
FA4-1159-000 13 - 22 RETAINING RING HB1-4301-000 7-4 GUIDE, CABLE,NCU
HA2-0868-000 1 - 10 LABEL, MERCURY HB1-4307-000 11 -8 ROLLER, DOCUMENT FEED
HB1-1264-000 26 - 2 HOLDER, HANDSET CRADLE HB1-4309-000 10 - 12 FRAME, ADF UPPER
HB1-1779-000 11 -5 SPACER HB1-4310-000 10 - 27 ARM, DETECTION (DES)
HB1-1848-000 16 - 4 STOP, CARTRIDGE HB1-4311-000 10 - 10 ARM, DETECTION (DS)
HB1-1867-000 13 - 15 ARM, DETECTION (PES) HB1-4313-000 10 - 19 GUIDE, DOCUMENT EJECT
HB1-1868-020 13 - 17 HOLDER, PES HB1-4314-000 10 - 21 LEVER, DOCUMENT RELEASE
HB1-1885-000 7 - 13 LEVER, LIFTING HB1-4315-000 10 - 22 CLAW, DOCUMENT RELEASE
HB1-1886-020 7 - 12 ARM, LIFTING HB1-4316-000 1 -9 LABEL, WARNING
HB1-2580-000 20 - 9 TR SLOPE HB1-4317-000 10 - 11 STOPPER, DOCUMENT
HB1-2864-000 10 - 25 ROLLER, BACK UP HB1-4318-000 10 - 5 HOLDER, SENSOR
HB1-2866-000 10 - 13 PLATE, PRESSURE HB1-4321-000 9-1 COVER, DOCUMENT GUIDE,LOWER
HB1-2867-000 9-2 STOPPER, OPERATION PANEL HB1-4322-000 8 - 12 COVER, GEAR
HB1-2883-000 8-4 SLIDER, RACK HB1-4323-000 8-9 COVER, FRONT
HB1-3008-000 2-7 RACK HB1-4324-000 8 - 11 DUCT, AIR
HB1-3011-040 18 - 4 HOLDER, TONER SENSOR HB1-4325-000 8 - 10 LEVER, ADF RELEASE
HB1-3012-000 18 - 2 SUPPORTER, TONER SENSOR HB1-4326-000 7-1 GUIDE, CABLE,PCNT
HB1-3018-000 12 - 2 STOPPER, TAPE HB1-4327-000 8-1 GUIDE, DOCUMENT FEED,LEFT
HB1-3023-000 6-8 HOLDER, SPEAKER HB1-4328-000 8-2 GUIDE, DOCUMENT FEED,RIGHT
HB1-3036-000 11 -21 PLATE, GROUNDING HB1-4329-000 8 - 15 COVER, DOCUMENT
HB1-3418-000 12 - 3 SPRING, GROUNDING HB1-4330-000 8-7 GUIDE, PAPER EJECT
HB1-3697-000 11 -4 ROLLER, SEPARATION HB1-4331-000 4-2 GUIDE, PAPER EJECT
HB1-4072-000 10 - 18 BRUSH, STATIC DISCHARGE HB1-4332-000 4-1 COVER, ROM
HB1-4258-000 4 - 15 COVER, PAPER EJECT, FACE DOWN HB1-4333-000 4-3 LEVER
HB1-4259-000 4 - 13 ARM, OVERFLOW DETECT HB1-4334-000 2-6 TRAY, PAPER FEED
HB1-4260-000 4 - 12 COVER, OVERFLOW SENSOR HB1-4335-000 2-9 COVER, GEAR
HB1-4261-000 4 - 18 SHEET 8-6
HB1-4265-000 17 - 4 PAD, SEPARATION HB1-4336-000 2-4 GUIDE, PAPER FEED,LEFT
HB1-4266-000 17 - 6 ARM, DETECTION HB1-4337-000 2-5 GUIDE, PAPER FEED,RIGHT
HB1-4267-000 17 - 8 MOUNT, ARM,DETECTION HB1-4338-000 2-3 GUIDE, PAPER FEED TRAY
HB1-4268-000 17 - 1 ARM, PLATE,RIGHT HB1-4339-000 2-2 TRAY, PAPER FEED
HB1-4271-000 18 - 6 SUPPORT, TONER SENSOR HB1-4340-000 2-1 TRAY, PAPER FEED,EXTENSION
HB1-4272-000 18 - 8 GUIDE, PAPER FEED HB1-4343-000 21 - 4 BODY, CASSETTE
HB1-4273-000 18 - 7 GUIDE, TONER SENSOR HB1-4344-000 21 - 3 GUIDE, PAPER WIDTH,RIGHT
HB1-4277-000 14 - 15 ROLLER, FEED HB1-4346-000 2 - 12 COVER, UPPER
HB1-4279-000 13 - 12 GUIDE, PAPER FEED HB1-4347-000 3-1 COVER, POWER SUPPLY
HB1-4280-000 5-4 COVER, RELEASE HB1-4348-000 1 -3 TRAY, DOCUMENT
HB1-4281-000 5-1 COVER, UPPER,RELEASE HB1-4349-000 1 -4 TRAY, DOCUMENT,EXTENSION
HB1-4282-000 13 - 9 ROLLER, PICK-UP HB1-4351-000 3-3 GUIDE, CABLE
HB1-4283-000 13 - 7 ROLLER, FEED HB1-4352-000 4-4 SUPPORT, LEVER
HB1-4284-000 13 - 11 PLATE, PAPER GUIDE HB1-4353-000 4-5 SHAFT, SUPPORT,LEVER
HB1-4285-000 12 - 7 CLUTCH, PAPER PICK-UP HB1-4354-000 5-5 PIVOT
HB1-4286-000 13 - 8 CLUTCH HB1-4357-000 1 -5 LABEL, DESTINATION
HB1-4287-000 16 - 3 STOPPER, CARTRIDGE HB1-4359-000 4-9 COVER, CABLE,MCNT
HB1-4288-000 4 - 10 GUIDE, CABLE HB1-4360-000 1 -2 TRAY, SUPPORT
HB1-4289-000 7 - 10 MOUNT, SHAFT HB1-4361-000 4 - 21 SPACER
HB1-4291-000 7 - 18 COVER, BOTTOM 7 - 22
HB1-4295-000 6 - 17 GUIDE, CABLE,SCNT HB1-4362-000 8-8 SHEET

6-1
 FAX-L350 6.NUMERICAL INDEX

PART FIGURE & PART FIGURE &

DESCRIPTION DESCRIPTION
NUMBER KEY NO. NUMBER KEY NO.
HB1-4365-000 10 - 17 SHEET, BRUSH, STATIC DISCHARGE HH2-2959-000 6 - 14 CABLE WITH CONNECTOR, 9P
HB1-4367-000 18 - 1 SHEET HH2-2960-000 11 -3 CABLE WITH CONNECTOR, 9P
HB1-4368-000 7 - 21 COVER, SENSOR HH2-2961-000 11 -2 CABLE, FLAT, 12P
HB1-4369-000 7-2 SHEET HH2-2962-000 6 - 22 CABLE WITH CONNECTOR, 2P
HB1-4370-000 12 - 18 PLATE, SCANNER HH2-2964-000 6 - 15 CABLE WITH CONNECTOR, 6P
HB1-4371-000 10 - 3 SHEET, OPERATION PANEL HH2-2965-000 11 -20 WIRE, GROUNDING
HB1-4372-000 10 - 4 SHEET, FUNCTION HH2-2966-000 10 - 28 WIRE, GROUNDING
HB1-4373-000 10 - 1 COVER, ONE TOUCH DAIL HH2-2967-000 4-8 WIRE, GROUNDING
HB1-4376-000 10 - 3 SHEET, OPERATION PANEL HH2-2968-000 4 - 28 CABLE WITH CONNECTOR, 3P
HB1-4377-000 10 - 4 SHEET, FUNCTION HH2-2969-000 25 - 1 CABLE WITH CONNECTOR, 6P
HB1-4378-000 10 - 3 SHEET, OPERATION PANEL HH2-2971-000 23 - TB1 CABLE WITH CONNECTOR, 2P
HB1-4379-000 10 - 4 SHEET, FUNCTION HH2-2977-000 25 - 2 CABLE WITH CONNECTOR, 9P
HB1-4380-000 2 - 14 SHEET HH2-2978-000 10 - 6 CABLE WITH CONNECTOR, 3P
HB1-4383-000 6 - 18 SHEET HH2-2992-000 7 - 17 CABLE WITH CONNECTOR, 2P
HB1-4384-000 13 - 24 SHEET HH3-5335-000 3-2 POWER SUPPLY UNIT
HF5-0399-000 10 - 15 WHITE SHEET UNIT HH3-5336-000 23 - T303 TRANSFORMER, INVERTER, 1.5VA
HF5-0540-000 16 - 5 LOCK, RELEASE COVER 23 - T304
HF5-0541-000 17 - 11 PICK-UP FRAME UNIT HH3-5337-000 23 - T302 TRANSFORMER, INVERTER, 6.3VA
HF5-0542-000 17 - 12 PLATE, MIDDLE HH3-5338-000 23 - T301 TRANSFORMER, INVERTER, 22VA
HF5-0543-000 11 -18 ROLLER, DOCUMENT EJECT HH3-5348-000 23 - L1 INDUCTOR
HF5-0544-000 11 -12 LOCK, OPERATION PANEL HH3-5357-000 3-2 POWER SUPPLY UNIT
HF5-0545-000 21 - 1 GUIDE, PAPER WIDTH,LEFT HH4-3235-000 22 - IC501 IC, MBCU34102-105, MCU
HF5-0547-000 12 - 10 PICK-UP ROLLER UNIT HH4-3236-000 22 - IC10 IC, HG73C051FD, GATE-ARRAY
HG5-1308-000 10 - 8 SEPARATION GUIDE ASS'Y HH4-3300-000 22 - IC26 IC, UPD703102GJ-A33-024-8EU
HG5-2043-000 4-7 NCU BOARD ASS'Y HH4-3340-000 22 - IC2 IC, MR27V1652D, MASK-ROM
HG5-2048-000 4-7 NCU BOARD ASS'Y HH4-3369-000 1 - 11 CD-ROM, DRIVER SOFTWARE
HG5-2180-000 12 - 1 ACTUATOR UNIT HH7-2240-000 24 - L51 FIXED INDUCTOR TSU-FL 474
HG5-2186-000 13 - 3 CAM UNIT 24 - L52
HG5-2210-000 1 -6 CASSETTE ASS'Y (A4) HH7-2408-000 26 - 1 HANDSET UNIT
HG5-2218-000 6-1 SCNT BOARD ASS'Y HH7-2415-000 13 - 1 SOLENOID
HG5-2221-000 6-2 PCNT BOARD ASS'Y HH7-2416-000 18 - 3 TONER SENSOR ASS'Y
HG5-2223-000 7 - 15 MODULAR BOARD ASS'Y HH7-2418-000 4 - 11 SOLENOID
HG5-2225-000 4-6 MCNT BOARD ASS'Y HH7-2419-000 11 -13 MOTOR, DOCUMENT FEED
HG5-2226-000 3-8 INTERFACE BOARD ASS'Y HH7-2422-000 14 - 16 MOTOR, MAIN
HG5-2232-000 10 - 2 OPERATION PANEL UNIT HH7-2424-000 11 -1 CONTACT SENSOR UNIT
HG5-2233-000 7 - 15 MODULAR BOARD ASS'Y HH7-2426-000 6-7 SPEAKER UNIT
HH2-1914-000 1 -8 MODULAR CORD, 6P HH7-2427-000 24 - T1 TRANSFORMER, AUDIO
HH2-2074-000 1 -8 MODULAR CORD (GERM) HH7-2430-000 24 - IC1 IC, HFS113F022A1, HYBRID
HH2-2219-000 1 -8 MODULAR CORD HH7-2431-000 24 - IC4 IC, H8D2965, HYBRID
HH2-2478-000 1 -8 MODULAR CORD, 2P HH7-2460-000 26 - 1 HANDSET UNIT
HH2-2824-000 1 -8 MODULAR CORD, 2P HH9-0259-000 6 - 16 CABLE WITH CONNECTOR, 11P
HH2-2946-000 6 - 19 CABLE, FLAT, 21P HS1-1063-000 11 -9 BUSHING
HH2-2947-000 7-3 CABLE, FLAT, 14P HS5-0148-000 14 - 12 GEAR, Z47
HH2-2948-000 7-5 CABLE, FLAT, 23P HS5-0238-020 8-5 GEAR, Z16
HH2-2949-000 6 - 20 CABLE, FLAT, 20P HS5-0254-000 2 - 13 GEAR, Z16
HH2-2950-000 6 - 21 CABLE, FLAT, 16P HS5-0310-000 13 - 2 GEAR, Z18
HH2-2951-000 6-6 CABLE WITH CONNECTOR, 3P HS5-0311-000 11 -16 GEAR, Z82D
HH2-2952-000 4 - 16 CABLE WITH CONNECTOR, 3P HS5-0312-000 11 -14 GEAR, Z59D
HH2-2953-000 10 - 29 CABLE WITH CONNECTOR, 6P HS5-0313-000 11 -15 GEAR, Z21/Z54
HH2-2954-000 6 - 13 CABLE WITH CONNECTOR, 10P HS5-0314-000 11 -7 GEAR, Z40D
HH2-2955-000 17 - 7 CABLE WITH CONNECTOR, 3P HS5-0315-000 11 -10 GEAR, Z21D
HH2-2957-000 13 - 14 CABLE WITH CONNECTOR, 9P HS5-0316-000 11 -11 GEAR, Z21/28B
HH2-2958-000 10 - 24 WIRE, GROUNDING HS5-0317-000 14 - 14 GEAR, Z28

6-2
FAX-L350 6.NUMERICAL INDEX

PART FIGURE & PART FIGURE &

DESCRIPTION DESCRIPTION
NUMBER KEY NO. NUMBER KEY NO.
HS5-1042-000 12 - 6 BUSH RB1-7334-000 19 - 9 GUIDE, JAMMED PAPER REMOVAL
13 - 20 RB1-7341-030 15 - 2 GUIDE, SUB, CARTRIDGE, RIGHT
14 - 18 RB1-8170-000 14 - 1 LEVER, RELEASE, D
HS5-1044-000 7 - 11 BUSHING RB2-1655-000 20 - 2 BUSHING
HS5-1089-000 13 - 5 BUSHING RB2-1656-000 20 - 4 BUSHING
HS5-1090-000 11 -19 BUSHING RB2-1657-000 20 - 1 ELIMINATOR, STATIC CHARGE
HS5-1091-000 11 -17 BUSHING RB2-1685-000 19 - 5 ROLLER, FACE UP
HS5-2075-000 18 - 9 SPRING, PRESSURE RB2-1686-000 19 - 8 FRAME
HS5-2077-000 11 -6 SPRING, CLUTCH RB2-1690-000 15 - 15 BUSHING
HS5-2078-000 10 - 9 SPRING RB2-1706-000 21 - 2 SHEET, SEPARATION
HS5-2129-000 10 - 16 SPRING, WHITE SHEET RF5-1513-000 14 - 2 ARM, SWING
HS5-2141-020 2-8 SPRING, SLIDER RF5-1514-020 16 - 9 GUIDE, CARTRIDGE,LEFT
8-3 RF5-1515-020 16 - 8 GUIDE, CARTRIDGE
HS5-2192-000 4 - 17 SPRING RF5-1533-000 16 - 7 PLATE, COMMUNITY
HS5-2193-000 17 - 3 SPRING, COMPRESSION RF5-1534-000 16 - 2 ROLLER, TRANSFER
HS5-2194-000 18 - 5 SPRING RF5-2358-000 16 - 1 GUIDE, TRANSFER
HS5-2196-000 5-2 SPRING, WIRE RF5-2364-000 15 - 4 ROLLER, PRESSURE
HS5-2197-000 7 - 14 SPRING, COMPRESSION RF5-2367-000 15 - 5 ROLLER, FEEDER
HS5-2198-000 7-9 SPRING, COMPRESSION RF5-2368-000 15 - 14 ROLLER, FACE UP
HS5-2199-000 10 - 14 PLATE, PRESSURE RF5-2382-000 6 - 12 COVER, WATERPROOF
HS5-2200-000 10 - 23 SPRING RG5-3453-000 12 - 5 SWITCH LEVER ASS'Y
HS5-6023-030 10 - 26 ROLLER, BACK UP RG5-3463-000 15 - 3 FIXING ASS'Y
HS5-6024-000 5-3 ROLLER, PAPER GUIDE RG5-3476-030 15 - 16 FLAPPER
18 - 10 RG5-3478-000 19 - 1 SPUR ASS'Y
HS5-6068-000 12 - 9 ROLLER, SUB RG5-3479-000 19 - 2 SPUR ASS'Y
HS5-6069-000 10 - 20 ROLLER, DELIVERY RG9-1281-000 12 - 4 SCANNER ASS'Y
HS5-9012-000 5-7 SCREW, TAP M3X6 RH2-5330-000 23 - TB301 CONNECTOR, 2P
13 - 21 23 - TB303
HT1-2148-000 1 -1 USER'S GUIDE (ENGLISH) RH6-3384-000 23 - R302 RESISTOR, 3MOHM, 0.5W
HT1-3092-000 1 -1 USER'S GUIDE (MODELE FRANCE) 23 - R319
HT1-5068-000 1 -1 USER'S GUIDE (DEUTSCH) RH6-3858-000 23 - R328 RESISTOR, METAL
HY9-0007-000 27 - T1 LUBE, MOLYKOTE EM-50L, GREASE RS5-0788-000 14 - 11 GEAR, 32T/93T
HY9-0022-000 27 - T4 IC-REMOVING TOOL (24-64P) RS5-0789-000 14 - 7 GEAR, 37T
QB1-3593-000 7 - 20 FOOT, PRINTER RS5-0790-000 14 - 10 GEAR, 54T/19T
RB1-2152-000 7 - 19 ROLLER, ARM RS5-0791-000 14 - 3 GEAR, 36T
RB1-7129-000 16 - 6 SPRING, GROUNDING RS5-0793-000 14 - 4 GEAR, 22T
RB1-7172-000 13 - 13 SPRING, GROUNDING RS5-0794-000 14 - 5 GEAR, 24T
RB1-7185-000 17 - 2 ARM, PLATE, LEFT RS5-0797-000 15 - 6 GEAR, 18T
RB1-7193-000 12 - 8 CAM, LEFT RS5-0798-000 14 - 6 GEAR, 15T
RB1-7194-000 12 - 11 CAM, RIGHT RS5-0799-000 14 - 8 GEAR, 51T/17T
RB1-7205-000 13 - 16 SPRING, TORSION RS5-2502-000 17 - 5 SPRING, COMPRESSION
RB1-7206-000 17 - 10 HOLDER, ARM RS5-2504-000 20 - 3 SPRING, COMPRESSION
RB1-7236-000 20 - 8 PIN, CONTACT RS5-2505-000 20 - 5 SPRING, COMPRESSION
RB1-7237-000 20 - 6 PIN, CONTACT RS5-2508-000 15 - 10 SPRING, COMPRESSION
RB1-7246-000 16 - 12 BUSHING RS5-2512-000 20 - 7 SPRING, COMPRESSION
RB1-7247-000 15 - 1 GUIDE, PAPER RS5-8543-020 19 - 7 LABEL, "WARNING HIGH TEMP"
RB1-7257-000 15 - 9 BUSHING, SPRING RS6-0380-000 14 - 13 GEAR, 23T/98T
RB1-7284-020 19 - 3 ROLLER, FACE DOWN VS1-5057-002 16 - 11 CONNECTOR, 2P
RB1-7286-000 19 - 4 SPRING, WIRE VS1-5888-002 22 - JP1 CONNECTOR, PIN 2P
RB1-7287-000 19 - 6 SPRING, WIRE WC4-5052-000 7 - 16 MICRO SWITCH
RB1-7288-020 15 - 7 BUSHING WG8-5362-000 4 - 14 IC, TLP1241, PHOTO-INTERRUPTER
RB1-7293-030 15 - 12 LEVER, SENSOR 6-4
RB1-7294-000 15 - 13 SPRING, TORSION 10 - 7

6-3
 FAX-L350 6.NUMERICAL INDEX

PART FIGURE & PART FIGURE &

DESCRIPTION DESCRIPTION
NUMBER KEY NO. NUMBER KEY NO.
WG8-5362-000 13 - 18 IC, TLP1241, PHOTO-INTERRUPTER 7 - 24
17 - 9 XB4-7401-209 7 - 28 SCREW, BINDING HEAD, SELF-TPG
WK1-5130-000 22 - BAT1 BATTERY, LITHIUM, CR2032/1HS XB4-7402-009 7 - 25 SCREW, SELF-TAPPING, M4X20
WK1-5131-000 22 - C11 CAPACITOR, ELE, DOUBLE LAYER XB6-7300-607 7 - 26 SCREW, TP, M3X6
WT2-0317-000 4 - 20 CLIP, CABLE XB6-7300-807 12 - 14 SCREW, TP, M3X8
7 - 30 14 - 19
11 -24 15 - 8
12 - 17 XB6-7301-205 7 - 27 SCREW, TP, M3X12
15 - 18 XD2-1100-642 13 - 10 RING, E
25 - 3 XD9-0108-000 13 - 4 PIN, DOWEL
WT2-0434-000 13 - 19 CLIP XD9-0121-000 14 - 17 PIN, DOWEL
WT2-5026-000 4 - 19 CLIP, CABLE XD9-0159-000 12 - 13 PIN, DOWEL
WT2-5034-000 7 - 29 BUSHING
15 - 17
WT2-5062-000 16 - 10 BUSHING
WT2-5089-000 4 - 27 CLAMP
WT2-5134-000 3-7 CLAMP, CABLE
WT2-5465-000 26 - 3 RIVET
WT2-5629-000 4 - 22 CLIP
WT3-5020-000 1 -7 CORD, POWER
WT3-5023-000 1 -7 CORD, POWER
WT3-5058-000 1 -7 CORD, POWER
WT8-0053-000 8 - 14 REVET
XA9-0476-000 4 - 23 SCREW, TP M3X8
10 - 31
XA9-0863-000 6-9 SCREW, TAP M3X6
16 - 14
XB1-2300-407 11 -23 SCREW, BH3X4 (S)
XB1-2300-807 3-5 SCREW, CROSS-RECESS, FCH
4 - 25
13 - 23
XB3-6300-800 3-4 SCREW, RS, M3X8
4 - 26
5-6
6 - 10
12 - 16
15 - 11
16 - 13
XB3-6301-000 2 - 11 SCREW, RS, M3X10
XB4-7300-807 2 - 10 SCREW, TAP TIGHT, BINDING HEAD
7 - 23
8 - 13
10 - 30
11 -22
12 - 15
17 - 13
18 - 11
XB4-7301-007 4 - 24 SCREW, TAP TIGHT BH3X10
XB4-7301-009 8 - 16 SCREW, BINDING HEAD SELF-TPG
XB4-7400-807 21 - 5 SCREW,TAPPING,TRUSS HEAD,M4X8
XB4-7401-007 3-6 SCREW, PAN HEAD SELF-TAPPING
5-8
6 - 11

6-4
FAX-L350 6.NUMERICAL INDEX

This page intentionally left blank

6-5
 Printed on paper that
contains 60% reused paper.

PRINTED IN JAPAN (IMPRIME AU JAPON) 1299D1.00-0 CANON INC.