Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Group 14 Work Equipment: 1. Structure

    Uploaded by

    Christian Vicente
    This document provides instructions for removing and installing various work equipment assemblies on a piece of construction equipment. It describes: 1. The overall structure of the equipment, which includes sections A, B, and C. 2. Procedures for removing and installing the bucket assembly, arm assembly, and boom assembly. The bucket and arm assemblies attach to the boom assembly. Detailed steps are provided for loosening bolts and pins, disconnecting hydraulic hoses, and safely lifting parts. 3. Emphasis is placed on safety measures like releasing hydraulic pressure, using blind plugs, slinging heavy parts, and always lifting from the center of gravity. Installation is the reverse of the removal steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Group 14 Work Equipment: 1. Structure

    Uploaded by

    Christian Vicente
    6 views4 pages
    This document provides instructions for removing and installing various work equipment assemblies on a piece of construction equipment. It describes: 1. The overall structure of the equipment, which includes sections A, B, and C. 2. Procedures for removing and installing the bucket assembly, arm assembly, and boom assembly. The bucket and arm assemblies attach to the boom assembly. Detailed steps are provided for loosening bolts and pins, disconnecting hydraulic hoses, and safely lifting parts. 3. Emphasis is placed on safety measures like releasing hydraulic pressure, using blind plugs, slinging heavy parts, and always lifting from the center of gravity. Installation is the reverse of the removal steps.

    Original Description:

    Original Title

    8-14

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for removing and installing various work equipment assemblies on a piece of construction equipment. It describes: 1. The overall structure of the equipment, which includes sections A, B, and C. 2. Procedures for removing and installing the bucket assembly, arm assembly, and boom assembly. The bucket and arm assemblies attach to the boom assembly. Detailed steps are provided for loosening bolts and pins, disconnecting hydraulic hoses, and safely lifting parts. 3. Emphasis is placed on safety measures like releasing hydraulic pressure, using blind plugs, slinging heavy parts, and always lifting from the center of gravity. Installation is the reverse of the removal steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views4 pages

    Group 14 Work Equipment: 1. Structure

    Uploaded by

    Christian Vicente
    This document provides instructions for removing and installing various work equipment assemblies on a piece of construction equipment. It describes: 1. The overall structure of the equipment, which includes sections A, B, and C. 2. Procedures for removing and installing the bucket assembly, arm assembly, and boom assembly. The bucket and arm assemblies attach to the boom assembly. Detailed steps are provided for loosening bolts and pins, disconnecting hydraulic hoses, and safely lifting parts. 3. Emphasis is placed on safety measures like releasing hydraulic pressure, using blind plugs, slinging heavy parts, and always lifting from the center of gravity. Installation is the reverse of the removal steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    GROUP 14 WORK EQUIPMENT

    1. STRUCTURE

    B
    C

    SECTION A SECTION B SECTION C

    8-327
    2. REMOVAL AND INSTALL
    1) BUCKET ASSEMBLY
    (1) Removal
    ‫ ڸ‬Lower the work equipment completely to 2
    ground with back of bucket facing down. 1

    GROUND

    ‫ ڹ‬Remove nut(4), bolt(3), and draw out the


    pin(1).

    3
    1

    ‫ ں‬Remove nut(4), bolt(3), and draw out the


    pin(2).

    3
    2

    (2) Install
    ‫ ڸ‬Carry out installation in the reverse order
    to removal.
    When aligning the mounting position of
    the pin, do not insert your fingers in the
    pin hole.
    Ɠ Adjust the bucket clearance.
    For detail, see operation manual.

    8-328
    2) ARM ASSEMBLY
    (1) Removal
    Ɠ Operate the control levers and pedals
    several times to release the remaining
    pressure in the hydraulic piping.
    Ɠ Loosen the breather slowly to release the
    pressure inside the hydraulic tank.
    Escaping fluid under pressure can
    penetrated the skin causing serious
    injury.
    ‫ ڸ‬Remove bucket assembly.
    For details, see removal of bucket
    assembly.
    ‫ ڹ‬Loosen socket bolt(2) to disconnect
    bucket cylinder hoses(1).
    Fit blind plugs in the piping at the
    chassis end securely to prevent oil from 1
    spurting out when the engine is started. 2
    ‫ ں‬Sling arm cylinder assembly, and remove
    nut, bolt, then pull out pin.
    Ɠ Tie the rod with wire to prevent it from
    coming out.
    For details, see removal of arm
    cylinder assembly. Crane
    ‫ ڻ‬Place a wooden block under the cylinder
    and bring the cylinder down to it.
    ‫ ڼ‬Remove nut(5), bolt(4) and pull out the
    pin(3) then remove the arm assembly.
    3, 4, 5
    şWeight : 820kg(1808lb)
    Ɠ When lifting the arm assembly, always lift
    the center of gravity.

    (2) Install
    ‫ ڸ‬Carry out installation in the reverse order
    to removal.
    When lifting the arm assembly, always lift
    the center of gravity.
    Ɠ Bleed the air from the cylinder.

    8-329
    3) BOOM ASSEMBLY
    (1) Removal
    ‫ ڸ‬Remove arm and bucket assembly.
    For details, see removal of arm and
    bucket assembly.
    ‫ ڹ‬Remove boom cylinder assembly from
    boom.
    For details, see removal of boom
    cylinder assembly.

    ‫ ں‬Disconnect head work wiring.


    ‫ ڻ‬Disconnect bucket cylinder hose(2) and
    arm cylinder hose(1).
    Ɠ When the hoses are disconnected, oil
    may spurt out.
    2

    ‫ ڼ‬Sling boom assembly(3).


    Crane
    ‫ ڽ‬Remove bolt(4), nut(5) and pull out the
    pin(6) then remove boom assembly.
    şWeight :1354kg(2985lb)
    Ɠ When lifting the boom assembly always
    lift the center of gravity.

    3 4, 5, 6

    (2) Install
    ‫ ڸ‬Carry out installation in the reverse order
    to removal.
    When lifting the boom assembly, always 4
    lift the center of gravity. 6
    Ɠ Bleed the air from the cylinder.
    5

    8-330

    You might also like