The Copperbelt University School of Engineering
The Copperbelt University School of Engineering
The Copperbelt University School of Engineering
School of Engineering
EA311 Aerodynamics I
Introduction Lecture
ae01010e
111010 (AWZ)
Forces on a flying object
~.
The object is flying with velocity V
R
V The gravitational force is W = mg.
~ from the
mg There is also a reaction force R
surrounding atmosphere.
ae01011e
111010 (AWZ)
Our restricted definition of ‘Flight’
1. Movement of object through atmosphere of space
sustained by aerodynamic, aerostatic or reaction forces,
or by orbital speed.
ae01014e
c AK)
111010 (
Is a flying bird in ‘flight’ ?
ae01015e
c AK)
101006 (
Basic forces on an aeroplane in
steady and level flight
L R • There is also a reaction force R
from
the surrounding atmosphere.
V T D
• The force R has two components -
mg
the lift L and the drag D.
ae01012e
101012 (
c AK)
History of aviation
ae01017e
c AK)
111010 (
Aircraft with static lift generation
buoyancy
buoyancy drag
thrust weight
weight
balloon airship
ae01018e
c AK)
101008 (
Aircraft dynamic lift generation principles
ae01019e
101008 (
c AK)
Definition of an Aeroplane
ae01020e
c AK)
111010 (
The Man-powered aircraft ‘Daedalus’
ae01021e
101011 (
c AK)
The swing-wing aircraft Gen. Dyn. F111
ae01022e
101011 (
c AK)
The VTOL aircraft
BAe Sea Harrier FRS. Mk 2
ae01023e
101011 (
c AK)
The convertiplane
Bell/Boeing V-22 Osprey
ae01024e
101011 (
c AK)
An aircraft classification scheme
aircraft
aerostat aerodyne
ae01016e
c AK)
101008 (
Definitions of some basic concepts
- identify and describe those geometry concepts for the aeroplane and parts
of it which are taken up in this section and in those parts of the textbook
referred to below, as well as
- describe the function and/or purpose of these,
- calculate the aspect and taper ratios and the sweep angles for tapered
wings,
- interpret the numbering system of NACA and NASA aerofoil sections,
- identify and describe the speed domains relevant for aircraft as well as
- explain why these boundaries are not sharp, and
- deduce which approximate maximum speed a specific aeroplane is
designed for from its geometric appearance, especially the planform of the
main wing.
M1-1.4 Definitions of some basic concepts
lateral axis
vertical axis
longitudinal axis
ae01101e
c AK)
060823 (
The main parts of a conventional
aeroplane
fin
wing
tail
engine
stabilizer
propeller
landing gear
fuselage
ae01102e
c AK)
060823 (
Control surfaces of a conventional
aeroplane
flaps rudder
elevator
trim tabs
elevator
trim tab
aileron
ae01103e
c AK)
060823 (
M1-1.4 Definitions of some basic concepts
straight wing
ae01104e
111010 (
c AK)
Overview of different wing planforms
ae01109e
101012 (
c AK)
Straight wing planform examples
rectangular wing
elliptical wing
tapered wing
ae01106e
c AK)
060823 (
Wing planform geometry definitions
Λ l.e.
Λ 25% cr
c
ct
Λ t.e.
b
ae01105e
060823 (
c AK)
Definitions of the aspect ratio
and the taper ratio
b2 ct
AR = λ=
S cr
ae01108e
060824 (
c AK)
The reference wing
cr cc
ct
ae01107e
c AK)
060824 (
M1-1.4 Definitions of some basic concepts
ae01202e
101014 (
c AK)
Aerofoil section axis system and geometry
ae01203e
c AK)
111010 (
M1-1.4 Definitions of some basic concepts
Classical: Modern:
• Göttingen (Gö) • NASA LS and MS (Low and medium
speed, resp.)
• RAF (Royal Aircraft Factory)
• NASA SC and NLR (Supercritical
• USA, M and Clark (Y) and Natural laminar flow, resp.)
• NACA 4-and 5-digit • Wortmann and Eppler
• NACA 1- and 6-series
ae01204e
c AK)
131103 (
NACA aerofoil section designations
4-digit sections: example NACA 2412
2 – maximum camber is 2% of chord
4 – maximum camber at 40% of chord
12 – maximum thickness 12% of chord
5-digit sections: example NACA 23012
230 – type of mean camber line
12 – maximum thickness 12% of chord
6-series sections: example NACA 653-218, a=0.5
6 – section from the 6-series
5 – minimum pressure at 50% of chord for basic symmetric section
3 – span in cl (here ∆cl = 0.3) in which a favourable
pressure gradient exists
2 – design cl = 0.2
18 – maximum thickness 18% of chord
a=0.5 – type of mean camber line
ae01205e
c AK)
131104 (
M1-1.4 Definitions of some basic concepts
ae01301e
c AK)
111010 (
Estimation of density variations
• In isentropic flow • The relative change in density is
−1/(γ+1)
ρ 1 ∆ρ ρ − ρ0 1
= 1 + (γ + 1) M 2 = ≈ − M2
ρ0 2 ρ0 ρ0 2
ae01303e
c AK)
111010 (
Aircraft speed domains
These are defined out from the flight Mach number M∞
ae01302e
101023 (
c AK)
M1-1.4 Definitions of some basic concepts
ae01401e
c AK)
141104 (
An aeroplane with an extremely large
aspect ratio
ae01403e
c AK)
141104 (
A subsonic aeroplane with a tapered wing
ae01402e
c AK)
141104 (
A classical aeroplane with an elliptic wing
ae01404e
c AK)
141104 (
An aeroplane with
a special straight wing planform
ae01405e
c AK)
141104 (
An aeroplane with a swept tapered wing
ae01406e
c AK)
141104 (
Two aeroplanes with a clean delta wing
ae01407e
c AK)
141104 (
A supersonic fighter with
a low aspect ratio straight tapered wing
ae01408e
c AK)
141104 (
M1-1.5 National and international
organisations
• United Nation (UN) agency for civilian aviation and air transport.
• http://www.icao.int
ae01501e
c AK)
111011 (
EASA
• EASA = The European Aviation Safety Agency.
• http://www.easa.eu.int
ae01502e
101021 (
c AK)
FAA
• FAA = Federal Aviation Administration.
• Created in 1958.
• http://www.faa.gov
ae01503e
101021 (
c AK)
IATA
• IATA = The International Air Transport Association.
• Members are the majority of the worlds passenger and cargo airline
companies.
• Founded in 1945.
• http://www.iata.org
ae01504e
101021 (
c AK)
ICAS
• ICAS = The International Council of the Aeronautical Sciences.
• Founded in 1956.
• http://www.icas.org
ae01505e
101021 (
c AK)
NACA – NASA
• NACA = National Advisory Committee for Aeronautics
NASA = National Aeronautics and Space Administration.
• http://www.nasa.gov
ae01506e
101021 (
c AK)
AIAA
• http://www.aiaa.org
ae01507e
101021 (
c AK)