UV Curable Inks: Will They Work For Everyone?: by Mike Ukena

UV Curable Inks: Will They Work for Everyone?
by Mike Ukena
UV Curable screen printing ink is a 100% solid system: that is, it essentially does not
contain solvent that must evaporate during the curing phase. The cure takes place
through the interaction of the ink ingredients and a strong UV (ultra violet) light source in
a dryer, or more accurately, a reactor.
Since UV contains little or no solvent, there is a lot of interest in using it because of the
lack of VOCs (volatile organic compounds). Either reducing VOCs or eliminating the
need to report them both have appeal. The reduction in VOCs also has an appealing
environmental effect.
Why then, doesn’t everyone just switch to UV curable ink? It is not that easy. As with
any product, there are advantages and disadvantages. Solvent inks have wonderful
coverage, they are relatively inexpensive, and they have good durability. But, they have
a strong odor, the vapors can create health concerns, and they produce a large volume
of VOCs.
Advantages of UV Ink
As we have already stated, the lack of VOCs is a very appealing aspect of UV curable
ink. The cost savings in permitting, reporting, and personal protection can be very
significant. There are, however, several other very strong reasons to use UV curable
inks.
1. Very rapid curing
UV cure reactors can be run at very high production rates. The actual cross-linking
of the UV ink takes place in one to three seconds, depending upon the color of the
ink and the intensity of the UV light source. High cure rates translate into very high
operating speeds. UV inks can be run on high-speed production equipment without
having to allow for excessively large dryers, as would be necessary for high-speed
solvent systems.
The rapid cure also allows UV inks to be used on a new generation of graphic
presses that can do multiple colors in succession without having to move the
substrate. Historically, graphic screen printing has been done on presses that did
one color at a time. The substrate was printed, put through the dryer (or racked for
air-drying), and then returned to the press for the next color.
The new generation of graphic screen presses takes advantage of the UV cure rate
and prints colors in succession with cure reactors between each print head. The
production rates of these machines are very good.
2. UV Ink does not dry in the screen.
Since UV ink does not dry in the screen, it is very easy to work with. Printers do not
have to worry about the ink clogging the mesh if they stop printing. The printer can
work for extended periods without ever having to touch the screen. The result is
excellent production throughput. It is quite common, with a good quality screen, to
be able to run an entire print run without having to clean the mesh. The chances of
being able to print a long run of solvent ink without having to clean the screen are
very low.
3. UV Ink has excellent color value
UV inks range in opacity from very transparent to translucent. There are no real
opaque UV inks. The high level of transparency produces a very clean color gamut.
This quality makes UV ink an exceptionally good choice for four-color process
graphic printing. This clarity of color, combined with the very fine pigment grind and
the fact that the ink does not dry in the screen allows UV ink to be printed through
extremely high mesh counts. It is not unusual to see UV printed through mesh
counts as high as 165 threads/cm (420 threads/inch) although 154 threads/cm (390
threads/inch) is much more common.
Disadvantages of UV Ink Systems
1. UV does not work on all substrates
UV ink works great for many applications. However there are some graphic
substrates that are not suitable. In most cases where UV ink does not work, it is
necessary to use a solvent ink system.
2. UV inks cannot be printed on dark substrates
UV inks are limited to transparent and translucent colors. The reason for this
limitation is the nature of the curing process itself. In order for UV ink to polymerize,
the UV light energy must reach all the way through the ink layer. If the ink were
opaque, it would block the UV energy and prevent a full cure; causing the ink to fail.
3. Outdoor durability is more limited than with solvent ink systems
Since its introduction in the late 1970’s, UV ink’s ability to last in an outdoor
environment has been greatly improved. However, there are applications where UV
ink just will not withstand the environmental effects like the sun as well as solvent
inks. A good example: the decals used on the exterior of airplanes must be printed
with solvent ink systems in order to have the specified durability. Inside an airplane,
UV is suitable for most applications.
4. UV is not as good in an application that will experience high levels of abrasion
One of the chief advantages of screen printing is that it prints a heavier deposit of ink
than other forms of printing. For this reason screen printing is the preferred printing
method for applications where surface abrasion may wear away at the surface. Of
all screen printing inks, UV inks ink deposits are among the thinnest, meaning that in
an abrasive environment, they will erode more quickly than other screen ink
systems.
5. UV inks are less flexible than other ink systems
One of the significant applications of screen printing is on products that will be

molded into shape after they are printed. Historically, UV inks have not done as well
in these applications as the cured ink tends to be more brittle than solvent ink films.
However, in recent years, a great deal of progress has been made in making flexible
UV inks. The flexibility issue is much less significant now than it once was.
6. UV inks are more sensitive than other inks to proper cure procedures
A printer can not just slap on UV ink, run it through the reactor and be confident that
it will be cured. There are issues with UV ink that must be addressed. These
include inter-coat adhesion and proper cure level for each color. When UV inks are
cured, if too much radiation is applied, the next color may not adhere properly. In
addition, the effects of the UV radiation are cumulative and if an ink film is over-
cured, it can become brittle and flake off.
Summary
Do not be swayed by the fact that there are six disadvantages listed to only three
advantages. The overwhelming majority of graphic screen printing applications can
benefit from UV curable ink systems. Many products are printed almost exclusively with
UV ink. The best known of these are CD-ROMs, which are printed on very high speed
production equipment.
UV is an excellent choice for many applications. Most successful graphic screen

printers include UV curable inks in their operation. For a great many, it is the main ink
system they use.

UV Curable Inks: Will They Work For Everyone?: by Mike Ukena

Uploaded by

Copyright:

Available Formats

UV Curable Inks: Will They Work For Everyone?: by Mike Ukena

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

UV Curable Inks: Will They Work For Everyone?: by Mike Ukena

Uploaded by

Copyright:

Available Formats

UV Curable Inks: Will They Work for Everyone?

2. UV Ink does not dry in the screen.

3. UV Ink has excellent color value

1. UV does not work on all substrates

2. UV inks cannot be printed on dark substrates

3. Outdoor durability is more limited than with solvent ink systems

4. UV is not as good in an application that will experience high levels of abrasion

5. UV inks are less flexible than other ink systems

One of the significant applications of screen printing is on products that will be

UV is an excellent choice for many applications. Most successful graphic screen

You might also like