= ELECTRONIC
=PRECIMEASURE TEMPERATURE CONTROLLER
MODEL 243A OT! / WTI TEMPERATURE INDICATOR / CONTROLLER FOR OIL COOLED TRANSFORMER
‘Application :
This scheme is used to Indicate Oil & Winding Temperature ofthe oil-immersed transformers. Relays are provided for Alarm, Tip
‘ond Cooler Duties, are operated os per the set value. 4-20mA DC signal outputs are provided seperately for OTI & WT] for Remote
Indication or SCADA Purpose. The System has the faciliy to store the maximum temperature attained.
‘Scheme Consists OF :
1. PT -100 Sensor } No. 2 Electronic Temperature Controller 1 No. 3. Thermometer Pocket | No. (Optional) No, 4 Remote indicator
2'No': Optional}
cps:
Temperature Sensor input RTD (Pt—100 IEC 60751)
» No. of sensor inputs. ONE
mee
ea
— Resollon ave
eee oe
Remote Indicator Remote Indicator Signal Outputs ‘Two onclogue Outputs (4-20mA Sviteble for 600
Power Consumption 5 Watts (Mox.)
Type Tested For Model 249A omic ion s 4s boosie eu res & Dat oe Oper
1. Protection class: IPSS as per IEC 60529 CATI Operaiing Temperature 30°C 0 70°C
2. Cold Test: -50°C os per IEC 60068-2-1 & Dry Heat Test: +70°C as per IEC 60068-2-2
3. Vibration Test: Amplitude 0.5mm, frequency 10-55Hz,1Hr 45mins / X,Y &Z axis as per IEC 60068-2-6
ORDERING INFORMATION
ML22434 PT. 1O0SENSOR RANGE. Mosus DATALOGGER REMOTE INDICATER
ves
ves NO
No
RS 485
150% ‘COMMUNICATION
20. 150°C Nes
resimpex 30-1506
1on2e 2 DUPLEX
2.0n14c
a.wni2c
4.WTLAC.
5.01126 + wnl2c
6.0T12¢ + wn ac. ‘Sample ordering information : 2243A\6\1\0.150°C\No\No\Yos
7.OT13C + WHL3C
Desclaimer : Precimeasure reserves the right to make any changes in the specification without prior notice.
poge:2/7
www.precimeasure.com