BME Assessment 02 QP
BME Assessment 02 QP
BME Assessment 02 QP
PART- A (3 x 2 = 6 Marks)
Q. No Questions Marks CO BL
1 Define ‘Degree of freedom’ 02 04 L1
2 Define circular pitch and diametral pitch in spur gears. 02 04 L2
3 Difference between Slip and Creep in belt. 02 03 L2
PART- B (2 x 5 = 10 Marks)
Q. No Questions Marks CO BL
Explain the working of Whitworth quick return mechanism with a
4 (a) neat sketch 05 04 L3
OR
Explain the working principle of Double acting reciprocating air
4 (b) compressor with a neat sketch 05 05 L1
In a reverted Epicyclic train, the arm A carries two gear B and C and
5 (a) 05 03 L3
a compound gear D-E. Wheel B meshes with gear E and gear C
meshes with gear D. The number of teeth on gear B, C and D are 75,
30, and 90. Find the speed and direction of gear C, when gear B is
fixed and arm A makes 100 rpm Clockwise.
OR
Two involutes gears of 20 degree pressure angle are in mesh. The
5 (b) 05 03 L4
number of teeth on pinion is 20 and the gear ratio is 2.If the pitch
expressed in module is 5mm and the pitch line speed is 1.2m/s,
assuming addendum as standard and equal to one module. Find
a).The angle turned through by pinion when one pair of teeth is in
mesh and b).The maximum velocity of sliding.
PART- C (1 x 9 = 9 Marks)
Q. No Questions Marks CO BL
The coefficient of performance of a heat pump working on reversed
6 (i) 02 04 L4
Carnot cycle is 6. If this machine works as a refrigerator with work
input of 10 kW, the refrigerating effect will be