Job Safety Analysis Sheet

Job Description: SURVEY, MANUAL/MECHANICAL EXCAVATION &

BACKFILLING,
Activity: Rebar & Form works, Loading, Offloading, Mechanical
JSA Ref. No. EF 1931-O&G-JSA01
Excavation, Concrete pouring, Scaffolding Erection & Dismantling, Work
(REV-0,22.02.2020)
at height, Housekeeping, Vehicle Maintenance, Rebar bending& Cutting
–M crane, Excavator, Grader, Roller, WL,BL, Skid loader, F, L Trailer,
Boom truck, Concrete Pump & Truck, P D.G,Hand power tools, Pick-up
Work Area / Equipment:
KOC
Facility: NEW NEW GATHERING CENTRE GC-32 Permit No.
Emergency-160
GC-32 AREA- Date:
90030980 (PIL)

Personal Protective Equipment & Tools: Hard Hat, Safety Shoes, Safety Goggles/Face shield, Hand Gloves, Overall with
reflective stripes, Hand tools & Power tools
Sequence of
Potential Hazards Precautions
Basic Job Steps

 Project HSE Induction and EOD training other job related

Non-compliance with KOC awareness training.
HSE Procedures  Permit to Work and Excavation Notification controls in place.
(Confined Space Permit for all excavations >1.2m).
 Pre-task TBT relevant to job hazards for every activity daily.
 Project Trainings & Safety induction / Visitor induction shall be
attended
Inexperienced / New  Ensure Heavy equipment operators, riggers and flagman
Employees / Visitors completed third party competency training.
 Only trained and competent personnel are allowed to perform
the activities.
Pre - work
 Ensure all equipment are inspected and certified as per KOC.
Equipment Failures
SA.013 Temporary Mobile Equipment Procedure.

 Ensure driver of the vehicle have completed Defensive Drive

Training by the Contractor.
Non-defensive Driving  Strictly follow Company driving procedures, Kuwait Ministry of
Interior Traffic Regulations.
 Comply with Company Safe Driving procedure HSEMS-SA-016
 Seat belts worn at all times by all personnel.

 Do not drive in Foggy/ Dusty/ rainy weather condition in case

Getting lost in the field
of poor visibility.
(Fog / Sand / Rains)
 Provide rain coat to personnel in case of rains.

 Do not position the equipment close to the trench /

excavation, overhead power lines.
 Ensure ground is stable and properly compacted as required for
Positioning of crane on
positioning of crane.
unstable ground
 Ensure crane outriggers pad of adequate size and thickness.
 Ensure 360 lifting radius of the crane are properly barricaded
with posted warning signs.

Lifting and Rigging

 Ensure all Cranes are inspected with necessary authorized 3rd
party inspection certificates and color coded.
 Do not overload the lifting capacity of the crane as per
manufacturer standards under any circumstances
Mechanical failure
 Do not exceed 75% of the rated capacity of the crane for any
lifting and shifting works.
 Do not override any inbuilt safety devices or take short cut
during the lifting operations.
 Ensure duly accomplished specific lifting plan as per the load
about to be lifted.

Page 1 of 3
  Ensure daily equipment inspection checklist done by operator
prior to starting the work.

 All worn lifting tools / tackles and those who don’t have 3rd
party certification must be removed from site.
Lifting tackles and sling
 All lifting tools and tackles must be free from grease and oils.
failure during the
 Ensure all lifting gears and shackles are inspected with
operation
necessary authorized 3rd party inspection certificates, good
condition and color coded.

 Ensure signal man or rigger is visible with fluorescent vest to

the crane operator during every phase of lifting activity and all
are 3rd party trained.
 Do not attempt any lifting operation on an extreme weather
Poor visibility condition i.e., heavy sandstorm, strong wind, thick fog, rain,
lightning etc.
 Ensure wind speed has been checked prior to starting of the
lifting.
 Ensure availability of anemometer during lifting operation.

 Do not stand below or near the suspended load.

 Close supervision by a competent rigging supervisor during the
lifting operations.
 Ensure proper positioning of body parts during slinging avoid
exposing in the line of fire.
Personnel injury  Ensure emergency first aid facilities are available with the
team and presence of qualified first aider at all times whilst
works is ongoing.
 In case of medical emergency call KOC Emergency number
#160.

 Conduct regular visual inspection of all lifting gears and

mechanism of crane prior to start any lifting operation by a
competent rigging supervisor/foreman.
Damage of equipment
 Provide adequately strong and long tag lines at both ends of
the load.

 Conduct survey prior to start any lifting operation inside

confined space by a competent rigging supervisor/foreman.
 Ensure gas test done prior to enter crane inside confined space
 The working ground must be compacted and free from
Crane positioning inside
loose/wet soil.
confined space
 Provide proper and safe access to enter crane inside confined
space.
 Only trained personnel shall be deployed
 Close supervision shall be provided
 Ensure the work place is maintained clear of debris, waste and
Personnel Injury due to
other rubbish and make the place clean and tidy.
poor housekeeping
Post Work  Close the trench, backfill & compact the area.
Trenches left open for
 Close the permit after making the site clean & tidy.
extended period
Had barricade / signage in English/Arabic.

 Drink water frequently to avoid dehydration (during both

summer and winter)
 Working schedules to avoid hottest times of day, with regular
Heat Stress / Extreme Cold rest/rehydration breaks (10-15mins/hr)
Additional Hazards  Ensure emergency first aid facilities are available with the
team and presence of qualified first aider at all times whilst
works is ongoing.
 In case of medical emergency call KOC Emergency number
#160.

Page 2 of 3
  Do not touch any company assets without proper authorization.
 In case of strange objects are found, immediately stop the
Un-identified Objects
activity, evacuate all personnel from the work location and
exposure
inform Company representative or call KOC safety / EOD as
appropriate at 160
 Awareness training on dangerous and poisonous animals
Biological hazards, animal
 Do not feed stray animals / wild life. Ensure buddy system is
bites
implemented.
JSA Done By Controlling Team: MP-III, TEAM-XI
Name:
Permit Applicant /
Controlling Team /
KOC No. Signature:
Asset Owner

Name: Controlling Team: MP-III, TEAM-XI

JSA Reviewed By
Permit Issuer
KOC No. Signature:

Page 3 of 3