Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Flowcon Green: Pressure Independent Control Valves With 100% Authority

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

FlowCon Green

Pressure Independent Control Valves with 100% Authority


The FlowCon Green / GreEQ insert is designed as any of its stepless-set 41 maximum flow settings,
a 3-in-1 solution combining a full stroke modulation while maintaining full spindle stroke.
control valve, an automatic balancing valve and a dif-
ferential pressure control valve. This insert includes • 3-in-1 combi valve, including modulating con-
an innovative diaphragm-based self-adjustment fea- trol valve, dynamic flow limiter and differential
ture, which enables each valve continuously to self- pressure control valve in one body.
balance. This ensures delivery of precisely the flow • 100% authority pressure independent.
rate required by each terminal unit, independent of • Full stroke modulation at any design flow.
pressure fluctuations in the system. In addition, each • Multiple Control Characteristics available:
insert can be adjusted to set an accurate maximum Linear (Green) or Equal% (GreEQ) insert and
flow limit to each circuit without stroke limitation. Linear or Equal% actuator.
• Easy solution to designers, installers
The FlowCon Green / GreEQ is a 100% authority and end-users - due to its flexible complete
pressure independent flow control valve which in- solution and user-friendly setting.
stantaneously self-balance at all points of operation, • Quick commissioning as the insert can be
even when there is variance in pressure differential. pre-set prior to site-work or be field adjust-
As long as the pressure differential across the valve able on demand.
is within the operating range, the valve diaphragm • Serviceable - the insert can be adjusted or ex-
is regulating nonstop ensuring constant differential changed without removing the housing from the
pressure across the regulating element and thereby system.
ensuring full authority. FlowCon Green / GreEQ will • ”Sealed” setting - actuator will cover the set-
in other words always provide 100% authority for ting and protect against tampering.
FlowCon Green
Pressure Independent Control Valves with 100% Authority
PICV with Actuator Green / GreEQ Inserts
Maintains correct flow despite pressure changes The Green range covers 20 mm / 3/4” insert in high
and guarantees that flow and actuator position only and low ΔP as well as one 40 mm / 1 1/2”. The GreEQ
change when demand requirements change. range covers 20 mm / 3/4” EQ%-insert in high and
Size: DN15-40 / 1/2”-1 1/2”. low ΔP.
Max. operational ΔP: 800 kPaD / 116 psid.
Max. flow rates: 0.005-1.29 l/sec / 0.076-20.4 GPM. FN, FNQ and FT Actuators
Media temperature: -20°C to +120°C / -4°F to +248°F. FN: electrical actuators 0(2)-10V modulating, 3-point
Static Pressure: 2500 kPa / 360 psi. floating or 2-position.
FNQ: electrical actuators 0(2)-10V modulating.
Housings FT: thermal actuators 0-10V modulating or ON/OFF.
The FlowCon Green insert can be used with the
following FlowCon housings: Applications
• FlowCon A - DN15-25 (1/2”-1”). Heating or cooling, Fan-coil units, Air-handler units
• FlowCon AB - DN15-32 (1/2”-1 1/4”). and other terminal units - wherever dynamic bal-
• FlowCon ABV - DN15-40 (1/2”-1 1/2”). ancing and fully accurate temperature control are
required.

For further information visit www.flowcon.com

Application Example
Fan Coil Unit with Pressure Independent Control (PICV) - Modulating Control.
FlowCon International can accept no responsibility for possible errors in any printed material. All rights reserved. 06.2020

FCU Heating FCU Cooling Controller Pump Metering Station FlowCon Green

www.flowcon.com
D E N M A R K • D U B A I • U S A • C H I N A • S I N G A P O R E

You might also like