https://www.phoenixcontact.

com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in
miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input voltage
24 V DC

Your advantages
 Slim design
 Efficient connection to system cabling using V8 adapter
 RT III sealed relay
 Safe isolation according to DIN EN 50178 between coil and contact
 Functional plug-in bridges
 Integrated input circuit and interference suppression circuit

Key Commercial Data

Packing unit 10 pc

GTIN

GTIN 4046356506991
Weight per Piece (excluding packing) 32.466 g
Weight per piece (including packing) 35.200 g
Custom tariff number 85364190
Country of origin Germany

Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area
Type of note Notes on operation
Separating plate PLC-ATP must be installed for voltages larger than
250 V (L1, L2, L3) between identical terminal blocks in adjacent
Note
modules. Potential bridging is then carried out with FBST 8-PLC... or
FBST 500....

07/06/2021   Page 1 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Technical data
Dimensions
Width 6.2 mm
Height 80 mm
Depth 94 mm

Ambient conditions
Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Degree of protection RT III (Relay)
IP20 (Relay base)

Coil side
Nominal input voltage UN 24 V DC
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Protective circuit Reverse polarity protection Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage display Yellow LED
Power dissipation for nominal condition 0.22 W

Contact side
Contact type 1 changeover contact
Type of switch contact Single contact
Contact material AgSnO
250 V AC/DC (The separating plate PLC-ATP should be installed for
voltages larger than 250 V (L1, L2, L3) between identical terminal blocks
Maximum switching voltage
in adjacent modules. Potential bridging is then carried out with FBST 8-
PLC... or ...FBST 500...)
Minimum switching voltage 5 V (at 100 mA)
Min. switching current 10 mA (at 12 V)
Maximum inrush current 10 A (4 s)
Limiting continuous current 6A
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity 2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)

07/06/2021   Page 2 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Technical data
Contact side
3 A (at 230 V, AC15)

General
Test voltage 4 kV AC (50 Hz, 1 min., winding/contact)
Operating mode 100% operating factor
Flammability rating according to UL 94 V0 (Housing)
Mechanical service life 7
2x 10 cycles
Mounting position any
Assembly instructions in rows with zero spacing

Connection data
Connection name Coil side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14

Connection data 2
Connection name Contact side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG 26 ... 14

Standards and Regulations

Connection in acc. with standard CUL
Designation Standards/regulations
Standards/regulations IEC 60664
IEC 60664A
DIN VDE 0110
DIN EN 50178/VDE 0160 (in relevant parts)
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (in relevant parts)
Pollution degree 3
Overvoltage category III

Conformance/approvals

07/06/2021   Page 3 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Technical data
Conformance/approvals
Designation Corrosive gas test
Identification ISA-S71.04. G3 Harsh Group
EN 60068-2-60

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”

Drawings

Diagram Diagram
7
I [A]

6 1

5
2
4
3
2

1
20 25 30 35 40 45 50 55 60 65 70
 [°C]

Limiting continuous current per contact for 0.85 ... 1.1 UN (contact-side)

(1) Limiting continuous current for horizontal installation position without
clearance
(2) Limiting continuous current for vertical installation position without Interrupting rating
clearance

Diagram Circuit diagram

U
U N 1,4 A
1,3

1,2 A2 11

1,1 A1 14
UN= 24 V DC
1
12
0,9

0,8
B
0,7
20 25 30 35 40 45 50 55 60 65
TU [ ° C]

Curve A
Maximum permissible continuous voltage Umax with limiting continuous
current on the contact side (see relevant technical data)
Curve B

07/06/2021   Page 4 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Minimum permissible operate voltage Uop after pre-excitation (see
relevant technical data)

Articles in set

Relay base - PLC-BPT- 24DC/21 - 2900445

6.2 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on DIN rail
NS 35/7,5, 1 changeover contact, input voltage 24 V DC
 
 

Single relay - REL-MR- 24DC/21 - 2961105

Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 24 V DC
 
 

Classifications
eCl@ss

eCl@ss 10.0.1 27371601

eCl@ss 11.0 27371601
eCl@ss 4.0 27371000
eCl@ss 4.1 27371000
eCl@ss 5.0 27371600
eCl@ss 5.1 27371600
eCl@ss 6.0 27371600
eCl@ss 7.0 27371601
eCl@ss 9.0 27371601

ETIM

ETIM 2.0 EC001437

ETIM 3.0 EC001437
ETIM 4.0 EC001437
ETIM 6.0 EC001437
ETIM 7.0 EC001437

UNSPSC

UNSPSC 6.01 30211916

UNSPSC 7.0901 39121515
UNSPSC 11 39121515
UNSPSC 12.01 39121515
UNSPSC 13.2 39122334

07/06/2021   Page 5 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Classifications
UNSPSC
UNSPSC 18.0 39122334
UNSPSC 19.0 39122334
UNSPSC 20.0 39122334
UNSPSC 21.0 39122334

Approvals
Approvals

Approvals

DNV GL / UL Listed / UL Recognized / cUL Recognized / cUL Listed / RC FRT / EAC / cULus Recognized / cULus Listed

Ex Approvals

Approval details

DNV GL 
  https://approvalfinder.dnvgl.com/  TAE0000196-03

UL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140

UL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

cUL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

cUL Listed 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140

RC FRT 
    B.00094

07/06/2021   Page 6 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Approvals

EAC 
    TR_TS_D_00573_c

cULus Recognized 
    

cULus Listed 
    

Accessories
Accessories
Bridge

Continuous plug-in bridge - FBST 500-PLC RD - 2966786

Continuous plug-in bridge, length: 500 mm, color: red

 
 

Continuous plug-in bridge - FBST 500-PLC BU - 2966692

Continuous plug-in bridge, length: 500 mm, color: blue

 
 

Continuous plug-in bridge - FBST 500-PLC GY - 2966838

Continuous plug-in bridge, length: 500 mm, color: gray

 
 

07/06/2021   Page 7 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

Single plug-in bridge - FBST 6-PLC RD - 2966236

Single plug-in bridge, length: 6 mm, number of positions: 2, color: red

 
 

Single plug-in bridge - FBST 6-PLC BU - 2966812

Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue

 
 

Single plug-in bridge - FBST 6-PLC GY - 2966825

Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray

 
 

Single plug-in bridge - FBST 8-PLC GY - 2967688

Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray

 
 

Controller board

System connection - PLC-V8/FLK14/OUT - 2295554

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto
8x PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend
 
 

07/06/2021   Page 8 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

System connection - PLC-V8/FLK14/OUT/M - 2304102

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto
8x PLC-INTERFACE terminals), number of channels: 8, control logic: minusschaltend
 
 

Adapter module - PLC-V8/D15S/OUT - 2296058

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: D-SUB pin strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x
PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend
 
 

System connection - PLC-V8/D15B/OUT - 2296061

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw
connection 1x, connection 2: D-SUB socket strip 1x 15-position, connection 3: Plug connection (Can be snapped onto
8x PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend
 
 

DIN rail

DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

07/06/2021   Page 9 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

07/06/2021   Page 10 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
 
 

End cap - NS 35/ 7,5 CAP - 1206560

DIN rail end piece, for DIN rail NS 35/7.5

 
 

DIN rail perforated - NS 35/15 PERF 2000MM - 1201730

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
 
 

07/06/2021   Page 11 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
 
 

DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, length: 2000 mm, color: silver
 
 

DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
 
 

07/06/2021   Page 12 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

End cap - NS 35/15 CAP - 1206573

DIN rail end piece, for DIN rail NS 35/15

 
 

DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798

DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
 
 

Labeled terminal marker

Zack marker strip - ZB 6 CUS - 0824992

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual
labels: 10
 
 

Zack marker strip - ZB 6,LGS:FORTL.ZAHLEN - 1051016

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width:
6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
 
 

Zack marker strip - ZB 6,QR:FORTL.ZAHLEN - 1051029

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive
numbers 1 ... 10, 11 ... 20, etc. up to 491 ... 500, mounting type: snap into tall marker groove, for terminal block width:
6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10
 
 

07/06/2021   Page 13 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

Zack marker strip - ZB 6,LGS:GLEICHE ZAHLEN - 1051032

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical
numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering
field size: 6.15 x 10.5 mm, Number of individual labels: 10
 
 

Marker for terminal blocks - ZB 6,LGS:L1-N,PE - 1051414

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N,
PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 6.15 x 10.5 mm, Number of individual labels: 10
 
 

Marker for terminal blocks - ZB 6,LGS:U-N - 1051430

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V,
W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering
field size: 6.15 x 10.5 mm, Number of individual labels: 10
 
 

Marker for terminal blocks - UC-TM 6 CUS - 0824589

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of
individual labels: 80
 
 

Marker for terminal blocks - UCT-TM 6 CUS - 0829602

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of
individual labels: 60
 
 

Partition plate

07/06/2021   Page 14 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

Separating plate - PLC-ATP BK - 2966841

Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual
separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
 
 

Power module

Power terminal block - PLC-ESK GY - 2966508

Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5
 
 

Screwdriver tools

Screwdriver - SZF 1-0,6X3,5 - 1204517

Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-
component grip, with non-slip grip
 
 

Terminal marking

Zack marker strip - ZB 6:UNBEDRUCKT - 1051003

Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of
individual labels: 10
 
 

Marker for terminal blocks - UC-TM 6 - 0818085

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
 
 

07/06/2021   Page 15 / 16
https://www.phoenixcontact.com/pi/products/2900299

Relay Module - PLC-RPT- 24DC/21 - 2900299

Accessories

Marker for terminal blocks - UCT-TM 6 - 0828736

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field
size: 5.6 x 10.5 mm, Number of individual labels: 60
 
 

Spare parts

Relay base - PLC-BPT- 24DC/21 - 2900445

6.2 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on DIN rail
NS 35/7,5, 1 changeover contact, input voltage 24 V DC
 
 

Single relay - REL-MR- 24DC/21 - 2961105

Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 24 V DC
 
 

Phoenix Contact 2021 © - all rights reserved

http://www.phoenixcontact.com

07/06/2021   Page 16 / 16