Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Dual High Broadband Antenna

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Dual High Broadband Antenna

4168.11.33.00

65° 2.0 m MET Antenna


1710-2170 MHz

Part Number: Horizontal Beamwidth: 65° Electrical Downtilt: Adjustable


7765.00 Gain: 19.5 dBi Connector Type: 7/16 DIN

The Powerwave broadband antenna design is based on a patented stacked


aperture-coupled patch technology, which provides high isolation performance
and a wide VSWR bandwidth. The antennas have superior radiation patterns due
to a unique reflector design that provides a very small variation of the -3dB
horizontal beam width over the frequency band as well as a high front-to-back
ratio. Powerwave broadband antennas come with manually adjustable electrical
tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest
possible cross-polar discrimination value.

Key Benefits

• Excellent broad- and multi-band capabilities


• Polarization purity makes good diversity gain
• Excellent pattern performance and high gain over
frequency
• High passive intermodulation performance
• Light, slim and robust design
Dual High Broadband Antenna
Electrical Specifications
1710-2170 MHz
Frequency Range (MHz) 2 x 1710 - 2170
Frequency Band (MHz) 1710 – 1880 1850 – 1990 1900 – 2025,
COVERAGE AND
2110 – 2170 CAPACITY
Gain, ±0.5(dBi) 18.8 19.2 19.7
Polarization Dual linear ±45°
Nominal impedance (Ohm) 50
VSWR, RX < 1.4:1
TECHNOLOGY
Isolation between inputs (dB) > 30 LEADERSHIP
Horizontal -3 dB beamwidth 67° ± 4° 65° ± 4° 63° ± 4°
Horizontal tracking (dB) < 2.0
Cross-polar discrimination (XPD) 0° (dB) > 16 > 18 > 20
Cross-polar discrimination ± 60° (dB) > 16 > 13 > 10
NETWORK
Vertical -3 dB beamwidth 4.7 ± 0.4° 4.4 ± 0.4° 4.2 ± 0.6° OPTIMIZATION
Electrical downtilt 0° to 5.5°
Vertical beam squint < 0.5°
Front-to-back ratio, total power (dB) > 28
Typical Horizontal and Vertical
Front-to-back ratio, co-polar (dB) > 28
7765.00 Patterns
First upper sidelobe suppression (dB) > 22, 20, 18, 16, 15, 14 @ 0, 1, 2, 3, 4, 5° edt
First null below horizon (dB) > -22 (typical >-18)
Power Handling, Average Per Input (W) 250
Power Handling, Average Total (W) 1000
IM, 3rd order, 2Tx@43dBm (dBc) < -153 QUALITY AND
RELIABILITY
IM, 7th order, 2Tx@43dBm (dBc) < -160

All specifications are subject to change without notice.


Contact your Powerwave representative for complete performance data.

Mechanical Specifications
Connector Type 4x 7/16 DIN female
Connector Position Bottom
Dimensions, HxWxD 1934x343x100mm (6'4"x1’2“x4”)
Wind load, frontal, 42 m/s Cd=1 (N) 868 N (195 lbf )
Wind Deflection 78 mph < 1°
Survival Wind Speed 70m/s (156 mph)
Lightning Protection DC grounded
Radome Material ASA
Radome Color Light Gray
Packing Size 2105x400x200mm (6'11"x1’4"x8")
Shipping Weight 24 kg (55 lbs)

Main European Office Main Asia Pacific Office


Corporate Headquarters
Antennvägen 6 23 F Tai Yau Building
Powerwave Technologies, Inc. Tel: 714-466-1000
SE-187 80 Täby 181 Johnston Road
1801 East St. Andrew Place Fax: 714-466-5800
D031-08206 Rev A

Sweden Wanchai, Hong Kong


Santa Ana, CA 92705 USA www.powerwave.com
Tel: +46 8 540 822 00 Tel: +852 2512 6123
Fax: +46 8 540 823 40 Fax: +852 2575 4860

©Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.

You might also like