An inspection certificate is supplied as standard.

Refer to page U-11 for details.

Back Plunger Type Dial Indicators

Holding bar SERIES 1

• Back Plunger type dial indicators are suitable • Model 1960T and 1961T, which uses
for mounting onto leveling machine tool Mitutoyo’s proprietary shock-proofing
tables or inspection jigs, and for use in mechanism, has excellent durability and
situations where standard dial indicators are shock resistance.
difficult to read.
90 0 10 Continuous scale Reverse reading

Holding bar (optional)

Order No. øD (mm) L (mm)
21AAA166 ø6 42
136567 ø6 81
124625 ø6.35 81
21AAA167 ø6.35 42
21AAA168 ø8 42
136568 ø8 81 1160T
Note: øD and L: detail shown in drawing below.
Graduation: 0.01 mm, 1160T Graduation: 0.01 mm, 1162T
Measuring range: 5 mm Back Plunger Measuring range: 5 mm Back Plunger
DIMENSIONS
ANSI/AGD Unit: in ISO/JIS Unit: mm 10 0 10 Balanced scale
Type øA Type øA
Holding bar (optional) Holding bar (optional)
B
B

L
øD
L
5
0.20

øD

0
0
ø0.375 -0.0012 ø8-0.009
F
F

H
H

ø4
ø0.16
G
G

E E 1960T
øC Graduation: 0.01 mm,
øC Measuring range: 1 mm One revolution
4-48UNF M2.5×0.45
Shockproof
Mass (g) Mass (g) Back Plunger
Order No. A B C E F G H (Bar excluded) Order No. A B C E F G H
(Bar excluded)
1166T 1.57 0.87 1.40 7/8 0.98 0.43 1.65 80 1160T 40 22.1 35.6 22.2 25 13.8 43.3 80
1167T 1.57 0.87 1.40 7/8 0.98 0.43 1.65 80 1162T 40 22.1 35.6 22.2 25 13.8 43.3 80
1168T 1.57 0.87 1.40 7/8 0.98 0.43 1.65 80 1960T 40 22.1 35.6 22.2 28.7 12.8 46 80
1961T 1.57 0.87 1.40 7/8 0.98 0.43 1.57 80 Note 1: Contact point (standard accessory) for all products in this page has
a role as a top dead point stopper. For this reason, if you need to
install an optional contact point with an outside diameter smaller
than 7 mm, use a washer (with outside diameter of at least 7 mm,
inside diameter of 3 mm, and thickness of approx. 0.5 mm) placed
between the contact point and the spindle.
Note 2: Refer to pages F-57 to F-60 for details of contact points.

FEATURES SPECIFICATIONS
Metric Metric ISO / JIS type
Range Maximum permissible error (MPE) (μm)
Order No. 90 0 10 10 0 10 Graduation Dial Measuring
Order No. (range/rev) Indication error Repeat- reading force (N)
(mm) Hysteresis
1960T     (mm) 1/10 Rev 1/2 Rev 1 Rev Measuring range ability
1160T   1960T 0.01 1 (1.27) 8 — — 14 4 3 50-0-50 1.4 or less
1162T   1160T 0.01 5 (1) 8 12 14 16 4 3 ±0-100 1.4 or less
1162T 0.01 5 (1) 8 12 14 16 4 3 100-0 1.4 or less
Note: Completed products inspection is performed in the vertical orientation (contact point downward) and the stated accuracy is guaranteed.
Inch Inch ANSI / AGD type
Graduation Range (range/rev) Accuracy (in) Repeatbility Dial Measuring F
Order No. 90 0 10 10 0 10 Order No.
(in) (in) First 1 Rev/2.5 Rev/ 10 Rev Retrace (in) reading force (N)
1961T     1961T 0.001 0.04 (0.05) ±0.001/—/— 0.0002 ±0.0002 20-0-20 1.4 or less
1166T   1166T 0.001 0.2 (0.05) ±0.001/±0.001/±0.001 0.00033 ±0.0002 ±0-50 1.4 or less
1167T   1167T 0.001 0.2 (0.05) ±0.001/±0.001/±0.001 0.00033 ±0.0002 0-25-0 1.4 or less
1168T   1168T 0.001 0.2 (0.05) ±0.001/±0.001/±0.001 0.00033 ±0.0002 50-0 1.4 or less
Note: Completed products inspection is performed in the vertical orientation (contact point downward) and the stated accuracy is guaranteed.

Mitutoyo reserves the right to change any or all aspects of any product specification, including prices, designs and service content, without notice. F-56