Specification Sheet

CONNECTRIX B-SERIES
DS-6600B SWITCHES
32Gb/s Fibre Channel Switches

Scalability from eight to 128 ports

There are five switch models in the 32Gb/s series. All models can function at 4, 8, 16 or 32 Gb/s speeds depending on
the installed optic. All switch models can be managed by Connectrix SANnav.
DS-6610B - Designed to support the SAN requirements of small-to-medium-sized environments, the Connectrix DS-
6610B is a 24-port switch that offers high performance and economy. The 1U base chassis of the DS-6610B is
prepopulated with eight 16Gb/s or 32Gb/s Fibre Channel Small Form Factor Pluggable (SFP+) shortwave optics. The
ports on demand (PoD) kits allow expansion in 8-port increments.
DS-6620B - Designed to support the SAN requirements of medium-to large sized workgroups as well as that of large
enterprises, the Connectrix DS-6620B offers forty-eight SFP+ ports and four QSFP ports in a 1U form factor. Two base
models are available which have 24 active 32Gb/s or 16Gb/s ports, populated with 32Gb or 16Gb/s shortwave SFPs.
QSFP ports can be used to form dense high performance ISLs with other 32Gb/s switches or directors. QSFPs can also
be configured to add up to 16 additional ports. With its speed and port density the DS-6620B can be deployed in any Fibre
Channel Storage Area Network (SAN) to enable very dense fabrics in a relatively small package.

DS-6620B-V2 – Supporting up to 64-ports, this next generation DS-6620B is nearly identical to the current DS-6620B.
While both versions offer the same key features and functionalities, there are some differences such as the requirement
for FOS 9.0+, the DS-6620B-V2 supports 4Gb/s only on F-port to host/target connections and only has one LED per
QSFP port. The number and type of ports is the same as the DS-6620B listed above. Like the DS-6620B, this switch is
ideal for medium to large enterprises.

DS-6630B – This model has a total of 128 ports. There are 96 standard SFP 32Gb/s capable ports and eight Quad Small
Form-factor Pluggable (QSFP) ports which support an additional 32 ports. The DS-6630B will be a good choice for mid-
size customers who aren’t quite ready to make the added investment into a 4-slot director class product. The DS-6630B
will also be a good fit for large enterprise class customers who need more ports at the edge, but don’t necessarily need a
director class product at the edge of a large SAN.
DS-6630B-V2 – Supporting up to 128-ports, this next generation DS-6630B is nearly identical to the current DS-6630B.
While both versions offer the same key features and functionalities, there are some differences such as the requirement
for FOS 9.0+, the DS-6630B-V2 supports 4Gb/s only on F-port to host/target and it has no restrictions for topology or for
encryption/compression unlike the original DS-6630B. The number and type of ports is the same as the DS-6630B listed
above. Like the DS-6630B, this switch is ideal large enterprise environments.

Connectrix B-Series DS-6600B Switches

© 2021 Dell Inc. or its subsidiaries.

DS-6600B Series Switches
System Architecture Technical Specification
DS-6610B
There are two DS-6610B chassis models. The base chassis model includes eight active 32Gb/s capable ports
that are populated with eight 16Gb/s SFPs. The 8-port port-on-demand (PoD) model allows the switch to
support additional 16 ports reaching a maximum of 24 ports. The other DS-6610B model which ends in “-EP”
comes fully populated with 24 16Gb/s SFPs and includes the Enterprise Package.

DS-6620B and DS-6620B-V2

The DS-6620B and DS-6620B-V2 feature 48 Fibre Channel SFP+ ports and 4 QSFP ports. There are two
base models which have 24 active 32Gb/s or 16Gb/s ports, populated with 32Gb or 16Gb/s shortwave SFPs.
The Ports on Demand (PoD) license activates 12 additional ports and includes 12 shortwave SFPs. The QSFP
Fibre Channel Ports
Ports On Demand license activates the four QSFP ports and contains four shortwave QSFPs. The enterprise
switch model fully populates the SFP+ ports with forty-eight shortwave SFPs and comes fully licensed with the
Enterprise Bundle (Fabric Watch, Trunking, Performance Monitoring, Extended Fabric, Fabric Vision).

DS-6630B and DS-6630B-V2

The DS-6630B and DS-6630B-V2 switch models supports up to 128 ports. There are 96 standard SFP
32Gb/s capable ports and eight Quad Small Form-factor Pluggable (QSFP) ports which support an additional
32 ports.

Performance 32Gb/s SFPs can operate at 32, 16 or 8Gb/s; 16Gb/s SFPs will operate at 16, 8 and 4Gb/s
DS-6610B - 2K dynamically allocated
Frame Buffers DS-6620B and DS-6620B-V2 - 15,360 dynamically allocated
DS-6630B and DS-6630B-V2 - 15,360 dynamically allocated
DS-6610B – 768 Gb/s
Aggregate Bandwidth DS-6620B and DS-6620B-V2 – 2Tb/s
DS-6630B and DS-6630B-V2 – 4Tb/s
Class of service Class 2, Class 3, Class F (Inter-switch Frames)
DS-6610B – F_Port, E_Port, M_Port, D_Port (ClearLink Diagnostics Port) on 24 SFP+ ports; Access Gateway
mode: F_Port and NPIV-enabled N_Port
DS-6620B and DS-6620B-V2 - D_Port (ClearLink Diagnostic Port), E_Port, EX_Port, F_Port, AE_Port;
Port types
optional port-type control Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port
DS-6630B and DS-6630B-V2 - D_Port (ClearLink Diagnostic Port), E_Port, EX_Port, F_Port, AE_Port,
optional port-type control.
Monitoring and Alerting Policy Suite (MAPS), Flow Vision, adaptive Networking (Ingress Rate Limiting, Traffic
Isolation, QoS), Fabric Performance Impact (FPI) monitoring, Slow Drain Device Quarantine, (SDDQ),
Advanced Zoning ((default zoning, port/WWW zoning, broadcast zoning, target-driven zoning); Dynamic Fabric
Provisioning (DFP), Dynamic Path Selection (DPS), Extended Fabrics, Enhanced BB Credit Recovery, FDMI,
Fabric services
Frame Redirection, Frame-based Trunking; FSPF, No Integrated Routing; IPoFC, ISL Trunking; Management
Server; NPIV, Time Server; Registered State Change Notification (RSCN); Reliable Commit Service (RCS);
Simple Name Server (SNS); Read Diagnostics Parameter (RDP)
Note: Some fabric services do not apply or are unavailable in Access Gateway mode.
DS-6610B – The DS-6610B has an embedded power supply / fan and it is non-replaceable. The entire switch
is a Field Replaceable Unit (FRU). The only FRU’s on the DS-6610B are the SFP’s. The DS-6610B will
support in-service firmware upgrades.
Hot swappable components
DS-6620B and DS-6620B-V2 – Dual power supplies with three embedded cooling fan FRUs, SFPs and QSFP
optics. The fans are connected to the power supplies and are not themselves replaceable.
DS-6630B and DS-6630B-V2 – Dual power supplies, three fan FRUs, SFPs and QSFPs
Installation options All models can be installed in a standard, customer-supplied, 19-inch Electronic Industries Alliance (EIA) rack
Refer to Dell EMC E-Lab Navigator smart phone App downloadable from the Apple or Google Store or E-Lab
Scalability
Navigator found at this link: https://www.delltechnologies.com/en-us/products/interoperability/elab.htm
Maximum frame size 2,112-byte payload
DS-6600B Series Switches
Management Technical Specification
DS-6610B FOS 8.1.0a or higher
DS-6620B FOS 8.0.0 or higher
Minimum Fabric Operating System
DS-6620B-V2 FOS 9.0.0 or higher
(FOS)
DS-6630B FOS 8.0.0 or higher
DS-6630B-V2 FOS 9.0.0 or higher

Advanced Web Tools. SSH, Auditing, Syslog NTP v3, CLI, SMI-S compliant; REST API, HTTP, SNMP v1/v3
Management (FE MIB, FC Management MIB)

SANnav Management Portal and SANnav Global View empower IT administrators to be more efficient and
productive by providing comprehensive visibility into the SAN environment. SANnav only supports open
SANnav Management systems and requires FOS v7.4 or higher.

Legacy Connectrix B-Series SAN Connectrix Manager Converged Network Edition (CMCNE)
Manager
Management access 10/100/1000 Mb/s Ethernet (RJ-45), In-band over Fibre Channel, Serial port (RJ-45), and one USB port
Firmware upgrades Non-disruptive download and activation
DS-6610B
DH-CHAP (between switches and end devices), FCAP switch authentication; HTTPS, IPsec, IP filtering, LDAP
with IPv6, Open LDAR, Port Binding, RADIUS, TACACS+, user-defined Role-based Access Control (RBAC),
Secure Copy (SCP), Secure RPC, Secure Syslog, SSH v2, SSL, Switch Binding, Trusted Switch
Security
DS-6620B, DS-6620B-V2, DS-6630B, DS-6630B-V2
AES-GCM-256 encryption on ISLs; DH-CHAP (between switches and end devices), FCAP switch
authentication; HTTPS, IPsec, IP filtering, LDAPwith IPv6, OpenLDAR, Port Binding, RADIUS, TACACS+,
user-defined Role-based Access Control (RBAC), Secure Copy (SCP), Secure RPC, Secure Syslog, SSH v2,
SSL, Switch Binding, Trusted Switch
ClearLink optics and cable diagnostics, including electrical/optical loopback, link traffic/latency/distance, flow
mirroring; built-in flow generator, POST and embedded online/offline diagnostics, including environmental
Diagnostics
monitoring, FC ping and Pathinfo (FC traceroute), frame viewer, non-disruptive daemon restart, optics health
monitoring, power monitoring, RAS trace logging, and Rolling Reboot Detection (RRD)
Call home Call home integration with SANnav and Connectrix Manager Converged Network Edition
Enterprise Package - includes Fabric Vision, Extended Fabric and ISL Trunking
Mainframe License - includes ISL Trunking, Fabric Vision and FICON Control Unit Port (CUP)
Integrated Routing – allows ports to be configured as EX-Ports supporting FC-FC routing
Optional license-key features
Note: “-EP” DS-6600B models include the Enterprise Package
DS-6600B Series Switches
Physical Specifications Technical Specification
DS-6610B - chassis supports rear-to-front (RTF) airflow
Enclosure DS-6620B and DS-6620B-V2 - There are two air flow options: front-to-rear (FTR) and rear-to-front (RTF)
DS-6630B and DS-6630B-V2 - There are two air flow options: front-to-rear (FTR) and rear-to-front (RTF)
DS-6610B
Height x Width x Depth: 1.69 x 16.88 x 12.07 inches, (42.9 x 428.8 x 306 mm) , 1 RU
Weight fully populated: 13 lbs (5.76 kg)

DS-6620B and DS-6620B-V2

Height x Width x Depth: 1.73x17.32x14.0 inches (43.9mmx440mmx355.6mm), 1RU
Dimension and weight
Weight with 2 power supplies and no transceivers: 17lbs (7.73kg)

DS-6630B and DS-6630B-V2

Height x Width x Depth: 3.41x17.32x24.0 inches (86.7mmx440mmx609.6mm), 2RU
Weight with 2 power supplies and no transceivers: 42lbs (19.05kg)

DS-6600B Series Switches

Power Requirements Technical Specification
DS-6610B - Switch chassis includes one fixed power supply
DS-6620B and DS-6620B-V2 - Switch chassis includes dual, hot-swappable power supplies with integrated
Power supply cooling system
DS-6630B and DS-6630B-V2 - Switch chassis includes dual, hot-swappable power supplies with integrated
cooling system
DS-6610B - 90 V to 264 V ~2.2A
AC Input DS-6620B and DS-6620B-V2 - 90 V to 264 V ~3.5A
DS-6630B and DS-6630B-V2 - 90 V to 264 V ~12A
Input line frequency 47-63 Hz
DS-6610B - 77 WATTS with all 24-ports populated
DS-6620B and DS-6620B-V2 - 206 WATTS with all 64 ports populated
Power consumption
DS-6630B and DS-6630B-V2 - 942 Watts with all 128-ports

DS-6600B Series
Environment Technical Specification
Temperature: 0°C to 40°C/32°F to 104°F
Operating environment
Humidity: 10% to 85% (non-condensing)
Temperature: −25°C to 70°C/−13°F to 158°F
Non-operating environment
Humidity: 10% to 90% (non-condensing)
Operating altitude Up to 3000m (9,842 ft)
Storage altitude Up to 12 km (39,370 ft)
Operating: Up to 20G, 6 ms half-sine
Shock
Non-operating: Half sine, 33G 11 ms, 3G axis
Operating: 0.5g sine, 0.4 grms random, 5 Hz to 500 Hz
Vibration
Non-operating: 2.0g sine, 1.1 grms random, 5 Hz to 500 Hz
DS-6610B - 24 ports at 215 BTU/hr
Heat dissipation DS-6620B and DS-6620B-V2 64 ports at 716 BTU/hr
DS-6630B and DS-6630B-V2 - 128 ports at 3512 BTU/hr
 Learn More about
Connectrix solutions Contact a Dell Technologies Expert

© 2021 Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC and other trademarks are
trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
owners. Reference Number: H16567.10