Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
3K views6 pages

Techroutes Switch Firmware Update Process

The document provides steps to update the firmware on a Techroutes switch: 1. Connect a laptop to the switch using an Ethernet cable and configure the laptop IP. 2. Use Tftpd32 software on the laptop to host the new firmware file and configure the TFTP settings. 3. Access the switch console, configure the switch IP, and copy the firmware from the TFTP server using the copy tftp flash command. 4. Reboot the switch to complete the firmware upgrade process.

Uploaded by

vivek bhardwaj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
3K views6 pages

Techroutes Switch Firmware Update Process

The document provides steps to update the firmware on a Techroutes switch: 1. Connect a laptop to the switch using an Ethernet cable and configure the laptop IP. 2. Use Tftpd32 software on the laptop to host the new firmware file and configure the TFTP settings. 3. Access the switch console, configure the switch IP, and copy the firmware from the TFTP server using the copy tftp flash command. 4. Reboot the switch to complete the firmware upgrade process.

Uploaded by

vivek bhardwaj
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 6

1

Process of Techroutes Switch Firmware Update


Requirement elements.

1) Switch OS
2) Console Cable
3) One Lan Cable (Cat5 / Cat6)
4) Tftpd32.exe software (This software download from internet it’s free) URL:
http://tftpd32.jounin.net/ ‐Click on Download Option.
5) Administrator Rights to Laptop (Mandatory)

Follow the below procedure:

1) Connect Laptop to Switch (any Ethernet port) using lan cable.

2) Assign IPv4 your laptop. Use IP 192.168.1.10 Subnet Mask 255.255.255.0 and
Default Gateway 192.168.1.1 click OK.
2

3) Open tftpd32.exe file  Click on Settings  Select Global tab  Unselect DHCP
Server & DNS Server Click OK and again OK. Don’t close this Software.
3

4) Again Click on Settings  Select TFTP tab  Click on Bind TFTP to this address and
select front box and click on 192.168.1.10 IP  Click OK and again OK.
4

5) In Current Directory  select Browse click Desktop path (Switch.bin File Copy
your Desktop).
6) In server interface select 192.168.1.10 IP. Don’t close this Software.
7) Connect Console cable from switch to laptop and logging on switch username
admin and password admin.

8) Then go to config mode. Switch>enable


Switch#Config
Switch_config#interface vlan 1
Switch_config_v1#ip add 192.168.1.1 255.255.255.0
Switch_config_v1#exit
Switch_config #exit
Switch_config#ping 192.168.1.10
PING 192.168.1.10 (192.168.1.10): 56 data bytes
!!!!!
‐‐‐ 192.168.1.10 ping statistics ‐‐‐
5 packets transmitted, 5 packets received, 0% packet loss round‐
trip min/avg/max = 0/0/0 ms
(Above ping is to ensure you configure correct IP in Local Area connection of
your System)

9) Switch# copy tftp flash Enter


Source file name[]? Switch.bin (Note: use Upper case “S”)
5

Remote‐server ip address[]? 192.168.1.10


Destination file name[Switch.bin]? (Press Enter Button Here)
####################################################################
#
####################################################################
#
####################################################################
#
####################################################################
#
TFTP:successfully receive 11828 blocks, 6055825 bytes
Switch#Jan 1 00:24:10 Switch.bin is wrote, TID:81dccae0

10) Now you comes in switch mode:


Switch#reboot
Do you want to reboot the switch(y/n)? y
####################################################################
#
####################################################################
#
####################################################################
#
####################################################################
#
##############

11) Logging on switch username admin and password admin.

12) To verify Firmware upgrade :

Check Version : Version 2.0.2G Build 43148


6

You might also like