Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 140 views

    1 - 2019-Adjust Negative Pressure-Version 2.1

    Uploaded by

    Yopi Putrasitepu
    The document provides instructions for setting up and using the DOCAN Negative Pressure System. It describes: 1) The function of negative pressure in keeping ink in the sub tank, filter, and print head. 2) How to connect the tubes and set the minimum and maximum pressure values for white and color inks. 3) How to adjust the pressure settings by entering settings mode and using buttons to change values. 4) How to set the front meter protection values to monitor pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1 - 2019-Adjust Negative Pressure-Version 2.1

    Uploaded by

    Yopi Putrasitepu
    140 views8 pages
    The document provides instructions for setting up and using the DOCAN Negative Pressure System. It describes: 1) The function of negative pressure in keeping ink in the sub tank, filter, and print head. 2) How to connect the tubes and set the minimum and maximum pressure values for white and color inks. 3) How to adjust the pressure settings by entering settings mode and using buttons to change values. 4) How to set the front meter protection values to monitor pressure levels.

    Original Title

    1_2019-Adjust Negative Pressure-Version 2.1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for setting up and using the DOCAN Negative Pressure System. It describes: 1) The function of negative pressure in keeping ink in the sub tank, filter, and print head. 2) How to connect the tubes and set the minimum and maximum pressure values for white and color inks. 3) How to adjust the pressure settings by entering settings mode and using buttons to change values. 4) How to set the front meter protection values to monitor pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    140 views8 pages

    1 - 2019-Adjust Negative Pressure-Version 2.1

    Uploaded by

    Yopi Putrasitepu
    The document provides instructions for setting up and using the DOCAN Negative Pressure System. It describes: 1) The function of negative pressure in keeping ink in the sub tank, filter, and print head. 2) How to connect the tubes and set the minimum and maximum pressure values for white and color inks. 3) How to adjust the pressure settings by entering settings mode and using buttons to change values. 4) How to set the front meter protection values to monitor pressure levels.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 8

    DOCAN Negative Pressure System

    -2019 Version 2.1

    Catalogue

    Warning: Please adjust negative pressure after you ready and


    Understand the book

    DOCAN Negative Pressure System ................................................................................. 1

    1. Function of Negative Pressure ................................................................................. 2

    2. Negative Pressure Made and Tube Connect ........................................................ 3

    3. Adjust negative pressure .......................................................................................... 5

    4. Adjust the Front Meter protection value ............................................................... 6

    Thanks for choosing DOCAN UV printer

    1/8
    1. Function of Negative Pressure

    Keep Ink in sub ink tank, Disk filter, Print

    head. So head can get continuous inks

    when printing.

    Find a suitable pressure:

    2/8
    2. Negative Pressure Made and Tube Connect

    I. Setting Value

    The board have 4 setting value.

    1 white Min Pressure, 2 white Max pressure. (Group 1 when Meter

    exit setting mode and flash)

    3 Color Min Pressure, 4 Color Max pressure (Group 2 when Meter

    exit setting mode and flash)

    This meter is the setting value.

    1. If you set -3.0 the negative pressure pumb will make the air

    pressure store in tank. If the pressure lower than -3.0, the

    Negative pressure pumb will works again to reach the setting


    3/8
    value.

    2. If current value bigger than setting max value, it will leak

    pressure with a snuffle valve!

    II. Store air pressure tank.

    III.Monitor meter. It only show the pressure to head. When bigger

    than the white meter max

    i: The meter used to display the pressure value.

    ii: Max Pressure Protection system

    Problem: pressure bigger than Max monitor

    Notice: when protection model means your negative pressure out


    4/8
    of control! Please check your setting value and the system

    hardware.

    3. Adjust negative pressure

    5/8
    I. Add or reduce the setting value!

    ①. Enter setting model. Press “ESC” You will get flash “1 3.23”

    This means number 1 value -3.23 (press “ESC” again switch to

    number 2 value “23.33”)

    Number 1: White Min set value

    Number 2: White Max set value

    Number 3: Color Min set Value

    Number 4: Color Max set value

    Notice: the Max value bigger -0.1 to -0.15 than Min value

    ②.Click “MOV” change the number you need change. The flush

    number means current adjust one.

    ③. Use “ADD” button adjust the numbers.

    ④. Press “ENT” button save the setting

    press “ESC” again switch to next setting value.

    4. Adjust the Front Meter protection value

    I. Set 1-P Protection Value

    Press “SET” button one second. Set the protection value 1-P with

    “UP” and “DOWN” button

    6/8
    1-P Flash with number

    (★★★Warning value 1-P and 2-P the same value. ★★★

    ★Normally 1-P to 2-P bigger than current value★ )

    II. Set 2-P Protection Value

    Press “SET” button again it will switch to 2-P

    2-P Flash with number

    Set 2-P with “UP” and “DOWN” button. The same value ad 1-P

    4. Bad status when printing

    I. When bad status directly print a nozzle check

    You will see your head bad status

    ii. check head surface, head surface leak few inks or not. (the leak

    inks block head nozzle ). You need add the few negative pressure.

    7/8
    Example: from -3.2 to -3.3 or more.

    iii. head not leak ink, but press cleaning button have few bubbles

    inside head, you need reduce few negative pressure,

    Example: from -3.3 to -3.3 or more.

    After cleaning button to maintenance heads, print nozzle check it

    is perfect, but after print 5CM to 10CM job it banding again,

    normally negative pressure problem.

    Advance knowledge：

    Version 2.1

    ------------------------END---------2018-6-13--------------- by: Hordy Wu

    8/8

    You might also like