VT650

Page Issue Levels P
Body/Cowl/Rear Door 20
21
Parts
Subframe/Body Prop
Powapak 22
Section Systems Locker 23
Channel Brush 24
Nozzle 25
Wide Sweep Brush 26
Wanderhose/Littasnatch 27
VT* & VS Hydraulics 28

500 605 650 800
Pneumatics 29
Range of Twin Engined
& Hydrostatic Sweepers Water System 30
From Manufacture
Sequence No. 07/2057 Electrical System 31
* With Stage 3a/Tier 3 Auxiliary Engines
Cab Controls 32
Part No 02617-4-P
Revision Level 09
Chassis Application 33
Miscellaneous 34
Optional Equipment 35
E.C.N. Issue - C/24694 Print date - 14.01.09

VT & VS - Parts
Foreword
This section of the manual will help you when ordering parts and serves as an assembly/disassembly
reference when used in conjunction with the Maintenance Section procedures.
About this section
Chapters 20 to 34, listed on the front sheet, cover the major areas of the machine. Some of the more
popular options such as the Supawash hi-pressure water system, Channel Brush Rotatilt, Powaboom and
Littasnatch wanderhoses are also covered in these chapters. Other more specialised options will be found
in the Optional Equipment Chapter 35.
The Table of Contents on page 1 of each chapter locates the exact page a particular illustration or parts
list is on. Parts that have been superseded and are not interchangable with the new items are shown in a
‘Superseded Parts’ section at the end of the chapter.
The BoM numbers above the parts lists are for Johnston internal reference only.
On pages that have more than one part number column, the symbol ‘<‘ indicates that the number in that
column is the same as that in the column on the left.
The symbol ‘>’ in front of an item number indicates that item has changed from the one shown on the
previous issue of that page.
Chassis Related Parts
The items listed below vary depending on what chassis the Johnston sweeper equipment is mounted to.
If any parts for these areas are required, contact the Johnston Parts Department quoting the machine
serial number shown on the plate fitted to the subframe crossmember below the body rear door.
Batteries and battery mounting

Cab - Sweep control installations (Chapter 32)
Cab - single and dual steer parts
Body discharge interlock
Rear mounted fuel tank
Gutter and wide sweep brush water spraybar mountings (Chapters 24 and 26)
Supawash hose reel and front bumper spraybar mountings (Chapter 30.SW)
Rear underrun bumper
Rear mudguards and mudflaps
Subframe to chassis mounts
Work lights (Chapter 31)
Channel brush pivot frame support posts (Chapter 24)
Channel brush hydraulic hoses 75 and 84 (Chapter 24)
Wide sweep brush hydraulic hoses 70 to 74 (Chapter 26)
Customer options i.e. autolube, special beacons, reversing camera, handwash etc.
F1 Foreword Page Issue 09

VT & VS - Parts
CHAPTER P
Page Issue Levels
Description
This chapter lists each page in the Parts section, it’s issue level and whether it
has changed since the previous revision level. Changed pages are indicated
by the letter ‘C’ in the changed column, and new pages by the letter ‘N’.
Section Revision Level 09 Page Issue Levels P1

VT & VS - Parts
Page Issue Changed Page Issue Changed
Front Sheet 09 C Foreword 1 09 C
P Chapter - Page Issue Levels

P1 09 C P2 09 C
P3 09 C P4 09 C
P5 09 C P6 09 C
P7 09 C P8 09 C
20 Chapter - Body/Rear Door/Cowl

20:1 01 20:2 01
20:3 05 20:4 04
20:5 04 20:6 01
20:7 01 20:8 01
20:9 01 20:10 01
20:11 06 20:12 01
20:13 05 20:14 01
20:15 01 20:16 01
20:17 01 20:18 01
20:19 01 20:20 03
20:21 03 20:22 01
20:23 01 20:24 09 C
20:25 01 20:26 01
21 Chapter - Subframe/Body Prop

21:1 02 21:2 08
21:3 08 21:4 08
21:5 02 21:6 01
22 Chapter - Powapak
22:1 07 22:2 05
22.PA:1 05 22.PA:2 05
22.PA:3 05 22.PA:4 05
22.PA:5 05 22.PA:6 08
22.PA:7 08 22.PA:8 07
22.PA:9 05 22.PA:10 05
22.PA:11 05 22.PA:12 05
22.PA:13 06 22.PA:14 05
22.PA:15 08 22.PA:16 05
22.PA:17 08 22.PA:18 07
22.PA:19 05 22.PA:20 09 C
P2 Page Issue Levels Section Revision Level 09

VT & VS - Parts
22 Chapter - Powapak - Continued

22.PA:21 07 22.PA:22 07
22.PA:23 07 22.PA:24 07
22.PA:25 07 22.PA:26 08
22.PA:27 07 22.PA:28 07
22.PB:1 07 22.PB:2 07
22.PB:3 07 22.PB:4 07
22.PB:5 07 22.PB:6 07
22.PB:7 07 22.PB:8 07
22.PB:9 07 22.PB:10 07
22.PB:11 07 22.PB:12 07
22.PB:13 08 22.PB:14 07
22.PB:15 07 22.PB:16 07
22.PB:17 07 22.PB:18 07
22.PB:19 07 22.PB:20 07
22.PB:21 08 22.PB:22 07
22.PB:23 07 22.PB:24 08
22.PB:25 07 22.PB:26 07
22.PB:27 07 22.PB:28 07
22.PC:1 07 22.PC:2 08
22.PC.3 07 22.PC:4 07
22.PC:5 07 22.PC:6 07
22.PC:7 07 22.PC:8 07
22.PC:9 07 22.PC:10 07
22.PD:1 07 22.PD:2 08
22.PD.3 07 22.PD:4 07
22.PD:5 07 22.PD:6 07
22.PD:7 07 22.PD:6 08
22.PE:1 07 22.PE:2 07
22.PE:3 07 22.PE:4 07
22.PE:5 07 22.PE:6 07
22.PF:1 07 22.PF:2 07
22.PF:3 08 22.PF:4 07
22.PF:5 07 22.PF:6 07
22.PF:7 07 22.PF:8 07
22.PF:9 07 22.PF:10 07
22.PF:11 07 22.PF:12 07
22.PF:13 07 22.PF:14 07
22.PF:15 07 22.PF:16 07
22.PF:17 07 22.PF:18 07
22.PF:19 07 22.PF:20 07
22.PF:21 07 22.PF:22 07
22.PF:23 07 22.PF:24 07
22.PF:25 07 22.PF:26 07

VT & VS - Parts
22 Chapter - Powapak - Continued

22.PG:1 07 22.PG:2 07
22.PG:3 07 22.PG:4 07
22.PG:5 09 C 22.PG:6 07
22.PG:7 07 22.PG:8 07
22.PG:9 07 22.PG:10 07
22.PG:11 07 22.PG:12 07
22.PG:13 07 22.PG:14 07
23 Chapter - Systems Locker

23:1 01 23:2 01
23:3 01 23:4 05
24 Chapter - Channel Brush

24:1 01 24:2 03
24:3 01 24:4 03
24:5 01 24:6 06
24:7 06 24:8 06
24:9 06 24:10 01
24:11 01 24:12 01
24:13 08 24:14 03
24:15 03 24:16 01
24:17 01 24:18 01
24:19 01 24:20 01
25 Chapter - Nozzle
25:1 06 25:2 09 C
25:3 01 25:4 09 C
25:5 01 25:6 09 C
25:7 08 25:8 06
25:9 09 N 25:10 09 N
26 Chapter - Wide Sweep Brush

26:1 01 26:2 03
26:3 08 26:4 03
26:5 04 26:6 01
26:7 01 26:8 01
26:9 01 26:10 05
26:11 01 26:12 01
26:13 01 26:14 01

VT & VS - Parts
27 Chapter - Wanderhose/Littasnatch
27:1 01 27:2 01
27:3 06 27:4 04
27:5 01 27:6 01
27:7 01 27:8 01
27:9 01 27:10 06
27:11 08 27:12 04
27:13 01 27:14 01
27:15 09 C 27:16 06
27:17 06 27:18 01
27:19 01 27:20 04
27:21 04 27:22 08
27:23 08 27:24 04
27:25 04 27:26 05
28 Chapter - Hydraulics
28:1 01 28:2 03
28:3 03 28:4 01
28:5 06 28:6 04
28:7 08 28:8 01
28:9 05 28:10 01
28:11 01 28:12 01
28:13 01 28:14 01
28:15 01 28:16 01
28:17 01 28:18 01
28:19 05 28:20 01
28:21 04 28:22 04
28:23 04 28:24 04
28:25 01 28:26 01
29 Chapter - Pneumatics
29:1 01 29:2 01
29:3 01 29:4 01
29:5 01 29:6 01
29:7 03 29:8 01
29:9 01 29:10 01

VT & VS - Parts
30 Chapter - Water System

30:1 01 30:2 01
30:3 01 30:4 01
30:5 01 30:6 09 C
30:7 09 C 30:8 01
30:9 01 30:10 01
30:11 02 30:12 02
30:13 01 30:14 08
30:15 08 30:16 06
30:17 09 C 30:18 01
30.SW:1 06 30.SW:2 01
30.SW:3 01 30.SW:4 03
30.SW:5 03 30.SW:6 01
30.SW:7 01 30.SW:8 03
30.SW:9 02 30.SW:10 03
30.SW:11 03 30.SW:12 01
30.SW:13 01 30.SW:14 01
30.SW:15 01 30.SW:16 01
30.SW:17 01 30.SW:18 01
30.SW:19 06 30.SW:20 06
30.SW:21 06 30.SW:22 01
30.SW:23 01 30.SW:24 06
31 Chapter - Electrical System

31:1 01 31:2 02
31:3 02 31:4 01
31:5 02 31:6 08
31:7 08 31:8 04
31:9 05 31:10 04
31:11 04 31:12 01
31:13 01 31:14 01
31:15 07 31:16 01
32 Chapter - Cab Controls

32:1 01 32:2 01
32:3 01 32:4 08
32:5 08 32:6 09 C
32:7 08 32:8 09 C
32:9 09 C 32:10 08
32:11 01 32:12 01
32:13 01 32:14 01

VT & VS - Parts
33 Chapter - Chassis Application

33:1 01 33:2 01
33:3 01 33:4 01
33:5 01 33:6 01
33:7 01 33:8 01
34 Chapter - Miscellaneous
34:1 01 34:2 02
34:3 02 34:4 02
34:5 02 34:6 01
35 Chapter - Optional Equipment

35:1 09 C 35:2 01
35.AE:1 01 35.AE:2 01
35.AE:3 01 35.AE:4 01
35.AE:5 01 35.AE:6 06
35.AE:7 06 35.AE:8 06
35.AE:9 01 35.AE:10 01
35.AE:11 06 35.AE:12 06
35.AE:13 06 35.AE:14 06
35.BD:1 03 35.BD:2 01
35.BD:3 03 35.BD:4 03
35.BD:5 04 35.BD:6 08
35.BD:7 08 35.BD:8 08
35.SG:1 01 35.SG:2 01
35.SG:3 01 35.SG:4 01
35.SG:5 01 35.SG:6 01
35.SG:7 06 35.SG:8 01
35.SG:9 06 35.SG:10 01
35.SG:11 06 35.SG:12 01
35.SG:13 01 35.SG:14 01
35.SG:15 01 35.SG:16 01
35.SG:17 06 35.SG:18 01
35.SG:19 03 35.SG:20 03
35.SG:21 04 35.SG:22 08
35.SG:23 04 35.SG:24 08
35.SG:25 08 35.SG:26 04
35.SG:27 04 35.SG:28 09 C
35.SG:29 04 35.SG:30 04
35.SG:31 04 35.SG:32 04

VT & VS - Parts
35 Chapter - Optional Equipment (continued)

35.SG:33 08 35.SG:34 06
35.SG:35 06 35.SG:36 06
35.SG:37 06 35.SG:38 06
35.SG:39 06 35.SG:40 06
35.SG:41 06 35.SG:42 08
35.SG:43 08 35.SG:44 08
35.SG:45 08 35.SG:46 06
35.WS:1 01 35.WS:2 01
35.WS:3 01 35.WS:4 01
35.WS:5 01 35.WS:6 01
35.WS:7 01 35.WS:8 01
35.WS:9 01 35.WS:10 01
35.WS:11 09 N 35.WS:12 09 N
35.WS:13 09 N 35.WS:14 09 N
35.WS:15 09 N 35.WS:16 09 N
35.WS:17 09 N 35.WS:18 09 N
35.WS:19 09 N 35.WS:20 09 N
35.WS:21 09 N 35.WS:22 09 N
35.WS:23 09 N 35.WS:24 09 N

VT & VS - Parts
CHAPTER 20
Body/Rear Door/Cowl
Table of Contents
Section Page
Body Common Parts
Mesh Screens and Doors 20 : 2

Discharge Components 20 : 6
Door Clamp Assembly 20 : 8
Water Components 20 : 10
Body Configuration
Intake Components 20 : 5
Rear Door
Door Assembly and Installation 20 : 12
Door Screens 20 : 14
Door Drains 20 : 16
Cowl Common Parts

Seals and Soundproofing 20 : 18
Wafer Pack and Wear Plates 20 : 20
Cowl Configuration
Intake Duct Flaps 20 : 22
Hydraulic Hoses
Body Discharge System 20 : 24
Page Issue 01 Chapter - Body/Rear Door/Cowl 20:1

VT & VS - Parts
Body Common Parts (1) - Mesh Screens and Doors
28 - Lifting eye boss blanking screws 2 - For Roof Mounted Access Door see Chapter 35,
Optional Equipment - Body Section ‘BD’
6 16 - For Mesh Shaker Option see

Wanderhose, Chapter 27
29,30
31
9
12 8
14
13 17
32
10
18
5 21 7
15
11 20
27
19
5
27
1c
3
4
22
33 - For Hopper Filter Strainer Option

see Supawash Section 30.SW
26
6
1b
23
27
25 22
24
25
95BD. 002-5
20:2 Chapter - Body/Rear Door/Cowl Page Issue 01

VT & VS - Parts

BoM 940611
Item No. Part No. Description Quantity

500 605 650 800
1a 294001-2 500 Body, Chrome Steel (4003) Not shown 3 - - -

294001-3 500 Body, Stainless Steel (316) Not shown 3 - -
BoM 950611
1b 295100-2 605 Body, Chrome Steel (4003) - 3 - -

295100-3 605 Body, Stainless Steel (316) - 3 - -
1c 295000-2 650 Body, Chrome Steel (4003) - - 3 -

295000-3 650 Body, Stainless Steel (316) - - 3 -
BoM 960611
1d 296000-2 800 Body, Chrome Steel (4003) Not Shown - - - 3

296000-3 800 Body, Stainless Steel (316) Not Shown - - - 3
BoMs 940611, 950611, 960611
2 280528-2 Roof Access Panel (4003) - 1 1 1

280528-3 Roof Access Panel (316) - 1 1 1
283613-1 Gasket - 1 1 1
124-437 Screw M8 x 25 - 10 10 10
460-10 Washer - Spring Ø8 - 10 10 10
3 280582-2 Blanking Plate - Recirculation (4003) - 1 1 1
280582-4 Blanking Plate - Recirculation (316) - 1 1 1
282574-1 Gasket - 1 1 1
118-169 Screw M10 x 25 - Stainless Steel - 2 2 2
4 451-6 Washer - Sealing M10 - 2 2 2
Body Welded Assemblies comprise items 1 to 4 above
> 5 284040-1 Cap 4 4 4 4

40643-1 Cap Seal 4 4 4 4
6 281376-2 Wanderhose Blanking Plate (4003) 2 2 1 1
5955-1 Seal 2 2 1 1
118-199 Screw M12 x 20 Stainless Steel 8 8 4 4
458-12 Washer - Spring Ø12 Stainless Steel 8 8 4 4
7 281947-2 Blanking Plate - Littasnatch (4003) - - 1 1
118-167 Screw M10 x 20 Stainless Steel - - 4 4
458-10 Washer - Spring Ø10 Stainless Steel - - 4 4
8 200345-1 Access Door 2 2 2 2

281217-1 Seal 2 2 2 2
9 123-149 Bolt M12 x 55 4 4 4 4
425-16 Nut M12 4 4 4 4
10 200342-2 Catch 2 2 2 2
11 282474-1 Shaft 2 2 2 2
124-100 Screw M6 x 12 2 2 2 2
457-2 Washer - Plain Ø6 2 2 2 2
460-8 Washer - Spring Ø6 2 2 2 2
12 63065-2 Handle 2 2 2 2
13 59-1 Cotter Pin 2 2 2 2

VT & VS - Parts

500 605 650 800
14 290-28 Buffer 2 2 - -
15 455-14 Washer - Plain Ø16 2 2 - -
16 200712-1 Mesh 2 2 2 -
280043-1 Mesh - - - 2
17 200714-9 Handle 2 2 - -
> 200714-13 Handle - - 2 4
18 42111-2 Eye - Mesh Handle - - 2 4
63761-2 Eye - Mesh Handle 2 2 - -
19 118-141 Screw M8 x 35 Stainless Steel 4 4 4 8
415-8 Nut M8 Stainless Steel 4 4 4 8
458-8 Washer - Spring Ø8 Stainless Steel 4 4 4 8
454-8 Washer - Plain Ø8 Stainless Steel 12 12 12 24
20 60-21 Lynch Pin / Chain - 9 Links 2 2 2 4
21 -
282872-2 Locker Door Installation - 4003 ) Each comprising

282872-3 Locker Door Installation - St. Stl.) items 22 to 26
22 282873-2 Locker Door (4003) - 2 2 -

282873-3 Locker Door (316) - 2 2 -
23 129-183 Screw M12 x 25 Cap Head - 2 2 -
24 293-14 Gas Strut - 4 4 -
25 425-14 Nut - Nyloc M8 - 8 8 -
26 211-34 Latch - 2 2 -
211-35 Latch Key - 4 4 -
27 288-39 Blanking Plug - 2 2 -
28 124-265 Screw M16 x 25 2 2 2 2

455-14 Washer - Plain Ø16 2 2 2 2
460-14 Washer - Spring Ø16 2 2 2 2
29 281377-2 Blanking Plate - Mesh Shaker (4003) 2 2 2 2

118-135 Screw M8 x 20 - Stainless Steel 8 8 8 8
454-8 Washer - Plain Ø8 - Stainless Steel 8 8 8 8
458-8 Washer - Spring Ø8 - Stainless Steel 8 8 8 8
30 281377-3 Blanking Plate - Mesh Shaker (316) 2 2 2 2
458-8 Washer - Spring Ø8 - Stainless Steel 8 8 8 8
31 282958-1 Limit Switch Mount 1 1 1 1

417-8 Nut - Nyloc M8 - Stainless Steel 2 2 2 2
32 282186-1 Limit Switch 1 1 1 1
84-51 Switch Actuator Arm - Spares item
129-36 Screw M4 x 20 Cap Head 2 2 2 2
33 200479-1 Plug 1 1 1 1
80-65 ‘O’ Ring 1 1 1 1

VT & VS - Parts
Body Configuration - Intake Components

9 10 8 7
11
5 6
4
3
12 95BD. 006
BoM 950612, 960612

Single Dual
* 1 280694-1 Intake Duct - Unlined, V500, 605, 650 1 2

296031-1 Intake Duct - Unlined, V800 1 2
2 118-201 Screw M12 x 25 Stainless Steel 4 8
485-12 Washer - Spring Ø12 Stainless Steel 4 8
3 93404-1 Make/Break Seal 1 2
4 93400-1 Sealing Ring 1 2

5 95775-1 Seal Ring Clamp 1 2
118-205 Screw M12 x 35 Stainless Steel 4 8
6 95774-2 Blanking Plate (Redundant Inlet) 1 -
135-1 Screw M12 x 25 4 -
460-12 Washer - Spring Ø12 4 -
7 40243-1 Centre Baffle - V650, V800 - 1

63745-1 Centre Baffle - V500, V605 Lo-Top - 1
8 41234-1 Locking Ring - 2
*9 281190-2 LH Wear Plate V500, V605 Lo-Top 1 1

281190-1 RH Wear Plate V500, V605 Lo-Top 1 1
40249-1 LH and RH Wear Plate - V650, V800 1 2
10 40223-1 Clamp Bar 1 2
> 11 118-167 Screw M10 x 20 Stainless Steel 2 4
458-10 Washer - Spring Ø10 Stainless Steel 2 4
454-10 Washer - Plain Ø10 Stainless Steel 2 4
12 97944-1 Blanking Plate - Used with Wanderhose 1 -
*For heavy duty intake ducts and wear plates see Optional Equipment
Chapter 35 Body Section BD

VT & VS - Parts
Body Common Parts (2) - Discharge Components
3
4 QUOTE REFERENCE LETTER ’A’, ‘B’, ‘C’ or ‘D’
WHEN ORDERING AN INDIVIDUAL SOUND PANEL
21
2
11
22
1
C
D
A
10
8
9
5 6 7
12
20 19
17 16 18
14 15 13
95BD. 001

VT & VS - Parts
Body Common Parts (2) - Discharge Components
BoM’s 940611, 950611, 960611.
1 800862-1 Piston 1
2 200755-1 Spring 1
3 118-70 Screw M5 x 16 - Stainless Steel 1
458-5 Washer - Spring Ø5 - Stainless Steel 1
454-105 Washer - Plain Ø5 - Stainless Steel 1
4 32-131 Boot 1
5 28940-4 Body Tip Cylinder - 500/605/650 Series 1

28940-5 Body Tip Cylinder - 800 Series Only 1
6 253-14 PC Flow Valve 1

451-18 Washer - Sealing 3/8” 1
7 263-3 Adaptor G3/8" 1
451-18 Washer - Sealing 3/8" 1
8 42072-1 Trunnion Block 2

9 38-1 Grease Nipple 2
10 41817-1 Sealing Plate 1
123-203 Setscrew M12 x 30 4
460-12 Washer - Spring Ø12 4
11 282396-1 Body Make/Break Seal 1
12 282473-1 RH Pivot Bracket - 605/650/800 Series 1

294060-2 RH Pivot Bracket - 500 Series Only 1
13 282473-2 LH Pivot Bracket - 605/650/800 Series 1
294060-1 LH Pivot Bracket - 500 Series Only 1
14 124-207 Screw M12 x 40 2
425-16 Nut M12 2
455-12 Washer - Plain Ø12 2
15 124-239 Screw M14 x 40 8
425-17 Nut M14 8
16 201248-1 Body Pivot Pin 2

17 123-159 Bolt M12 x 110 2
425-16 Nut N12 Nyloc 2
19 281443-1 Door Clamp Assembly - See over page 1

20 124-277 Screw M16 x 70 4
21 281200-2 Sound Attenuation Kit - 800 Series Only 1

281196-3 Sound Attenuation Kit - Lo-Top Body 1
280805-2 Sound Attenuation Kit - Hi -Top Body 1
22 283-23 Retainer Nail 22
283-25 Retainer Cap 22

VT & VS - Parts
Body Common Parts (2) - Door Clamp Assembly
19 2 18 15,16
12,13,15,23
6,7,15 15
17 17
1
12
2
21
1
13
23
15
24
15
22 20
15,24
3 2
10,11,14,15 7,9,15
6,7,15 8,14,15
5 1 12,13,15,23 4 5 95BD. 012

VT & VS - Parts
Body Common Parts (2) - Door Clamp Assembly
Drg. No. 281443 Rev.07
281443-1 Door Clamp Assembly
1 281427-1 Chute Weld Assembly 1

2 282845-1 Fulcrum 1
3 281429-1 Lever - Cranked 1
4 281431-1 Lever 1
5 281430-1 Claw 2
6 281442-3 Pivot Bolt 1

7 281434-3 Spacer 2
8 281435-3 Pin 1
9 281439-3 Pivot Bolt 1
10 281964-3 Pivot Bolt 1
11 282579-3 Spacer 1
12 281958-3 Pivot Pin 1
13 282026-3 Spacer 1
14 455-12 Washer - Plain M12 3
15 425-16 Nut - Nyloc M12 6
16 123-190 Bolt M16 x 90 1
425-18 Nut - Nyloc M16 1
455-14 Washer - Plain M16 2
17 124-215 Setscrew M12 x 80 2

420-16 Nut M12 2
18 281565-1 Cylinder 1
19 29145-1 Clevis Pin 1
39624 Spring Clip 1
20 282187-1 Limit Switch 1

21 129-38 Screw Cap Head M4 x 25 2
22 282676-1 Actuating Arm 1
23 282705-3 Spacer 1
24 282706-3 Spacer 1
Notes

VT & VS - Parts
Body Common Parts (3) - Water Components
34 33
35 36
19
18
13 12 13 15 14
17
19
16
2 1 8 7
3
6
11
11
5
10
9
4
37
38
20
31
29
21
23
22
24
25 32
30
95BD. 011-7
28
27
26

VT & VS - Parts
Body Common Parts (3) - Water Components

BoM’s 940611, 950611, 960611
1 667-31 Hydrant Coupling - Stortz 1

18684-1 Hydrant Coupling - UK Machines only 1
2 42119-1 Body Hydrant Filler 1
3 39402 Filter Element 1
4 61096-2 Rubber Elbow 1
501-9 Hose Clip - Elbow to Body 1
501-7 Hose Clip - Elbow to Basket 1
> 5 284075-1 Water Filler Basket 1
6 95813-1 Bracket 1
7 501-11 Hose Clip 1
8 124-99 Screw M6 x 10 2
9 272-33 Hose x 0.3m 1
501-11 Hose Clip 1
10 44-28 Plastic Cap 1
11 45-29 Plastic Cap 2

12 42213-1 Hose 1
14 283632-1 Tube 1
15 22773-1 Spacer 3
124-139 Screw M8 x 30 3
425-14 Nut M8 3
16 39253 Ball Valve 1
17 15656-1 Sight Tube 1
18 22-7 Ball Float 1
20 55-4 Plug R1 - 1/4" 1
283062-2 Body Filter Assembly - Comprising items 21 to 28
21 6974-1 Suction Element 1

22 283033-1 Flange 1
23 277-198 Backnut 1 1/2” BSP 1
24 277-214 Gasket 1 1/2” 1
25 277-212 Nipple 1 1/2” BSP 1
26 277-213 Hose Tail 1 1/2” BSP x 90° 1
27 277-170 Fly-nut 1 1/2” BSP 1
28 277-171 ‘O’ Ring 1
29 80-143 ‘O’ Ring 1

30 124-135 Screw M8 x 20 4
31 277-230 Elbow 1
32 48-328 Level Switch 1
33 277-186 Elbow 1
34 277-159 Fly Nut 1
35 277-188 ‘O’ Ring 1
36 44-55 Insert 1
37 277-189 Blanking Cap 1
38 277-160 Gasket 1

VT & VS - Parts
Door Assembly and Installation

VT & VS - Parts
Rear Door Assembly and Installation
BoM 950811 - Door Assembly

4003 316
1 281620-2 Rear Door - Chrome Steel (4003) 1

281620-3 Rear Door - Stainless Steel (316) 1
2 29128-3 Bush 4 4
3 281777-1 Door Seal 1 1

4 281778-1 Door Seal - Re-circulation Port 1 1
> 5 284040-1 Cap 2 2
40643-1 Seal 2 2
> 6 282451-2 Guard/Stowage - Chrome Steel 1

282451-3 Guard/Stowage - Stainless Steel 1
> 7 118-135 Screw M8 x 20 - Stainless Steel 4 4
458-8 Washer - Spring Ø8 - Stainless Steel 4 4
454-8 Washer - Plain Ø8 - Stainless Steel 4 4
BoM 950813 - Door Installation
8 282952-1 Hinge Pin 2

417-8 Nut - Nyloc M8 - Stainless Steel 2
10 40897-1 Relay 1
29128-3 Bush 2
11 282952-2 Hinge Pin 1
13 60113-9 Door Actuation Shaft 1

14 40572-1 Hinge Pin 1
118-137 Screw M8 x 25 - Stainless Steel 1
15 29170-1 Hydraulic Cylinder 1

16 283325-1 Pilot Check Valve 1
17 40553-1 Pin 1
425-18 Nut - Nyloc M16 2
18 255-11 Swivel Tee 1/4” 1
19 242-10 Swivel Adaptor G 1/4” 1
20 40572-1 Hinge Pin 1

21 124-132 Screw M8 x 12 1

VT & VS - Parts
Rear Door Screens

VT & VS - Parts
Rear Door Screens
BoM 950812
Item No Part No. Description Quantity

Standard Perforated Wedge Primary
Wire
1 283530-1 Standard Panel Assembly 2 - - -
2 283420-1 Perforated Panel Assembly - 2 - -
3 283531-1 Wedge Wire Panel Assembly - - 2 -
4 281680-1 Primary Panel Assembly - - - 1
5 281664-3 Pin Mesh Retainer 8 8 8 -

417-8 Nut - Nyloc M8 - Stainless St’l 8 8 8 -
6 289-38 ‘R’ Spring Clip 8 8 8 -
7 283508-1 L.H. Hinge Bracket 2 2 2 -

8 283508-2 R.H. Hinge Bracket 2 2 2 -
9 118-137 Screw M8 x 25 - Stainless St’l 8 8 8 -
454-8 Washer - Plain Ø8 - Stainless St’l 8 8 8 -
458-8 Washer - Spring Ø8 - Stainless St’l 8 8 8 -
10 283-2 Spring Clip 2 2 2 -
11 281685-1 Locking Bracket - - - 2

12 281684-2 Pivot Bracket - - - 2
13 118-137 Screw M8 x 25 - Stainless St’l - - - 8
454-8 Washer - Plain Ø8 - Stainless St’l - - - 8
458-8 Washer - Spring Ø8 - Stainless St’l - - - 8
14 283-2 Spring Clip - - - 1
15 289-39 ‘R’ Spring Clip - - - 2
16 3162 Plug - R 1/4” 1 1 - -

17 88-15 Ball Valve - 1/4”M/F - - 1 -
18 451-124 Copper Washer G 1/4” 1 1 1 -
Notes

VT & VS - Parts
Rear Door Drains
1 13 12 14
2
3
5 4
6
15
8
7
‘A’’
‘A ‘D’’
‘D
11
11
95BD. 009
5
4,6
5
8
7 9,6
10
‘B’’
‘B ‘C’’
‘C
Base System comprises assemblies ‘A’ and ‘B’

De-watering and Recirculation Systems comprise assemblies ‘A’ and ‘C’
4" Valve Option comprises assembly ‘D’. This can be fitted with Base or De-
watering/Recirculation Systems as required.

VT & VS - Parts
Rear Door Drain
BoM 950814

‘A’ ‘B’ ‘C’
Assemblies ‘A’, ‘B’ and ‘C’
comprising items 1 to 10:
1 282727-1 Layflat Stowage Plate 1 - -

2 281395-1 Gasket 1 - -
3 118-167 Screw M10 x 20 - Stainless Steel 8 - -
451-140 Washer - Brass Ø10 8 - -
4 281452-1 Drain Spigot 1 1 -

5 281411-1 Gasket 1 1 1
6 118-137 Screw M8 x 25 - Stainless Steel 3 3 3
451-82 Washer - Brass Ø8 3 3 3
7 9983 Layflat Hose x 1m 1 1 -

8 501-7 Circlip 1 1 -
9 281715-3 1 1/2" Valve Drain Spigot - - 1

10 39253 1 1/2" Ball Valve - - 1
11 288-29 Lifting Eye Plug x 2
KT01795
Assembly ‘D’ comprising items 12 to 15: ‘D’
12 281393-3 4" Valve Drain Spigot 1

13 281395-1 Gasket 1
451-6 Washer - Sealing Ø10 8
15 88-24 4" Drain Valve 4
Notes

VT & VS - Parts
Cowl - Common Parts (1) - Seals and Soundproofing
10 7 6
1
9
8
5
4
3
2
U QUOTE REFERENCE LETTER

11 ’E’, ‘F’, etc. WHEN ORDERING
AN INDIVIDUAL SOUND PANEL
H I
W J
M
W
O P
F
W E W
P
O
L
K
N Q
12 R
V
S G
95BD. 010-2

VT & VS - Parts
Cowl - Common Parts (1) - Seals and Soundproofing
BoM 951511 - 500, 605, 650
1 281170-1 Cowl - Lo-Top Mild Steel 1

281170-2 Cowl - Lo-Top Chrome Steel (4003) 1
281170-3 Cowl - Lo-Top Stainless Steel (316) 1
280700-1 Cowl - Hi- Top Mild Steel 1
280700-2 Cowl - Hi- Top Chrome Steel (4003) 1
280700-3 Cowl - Hi- Top Stainless Steel (316) 1
Cowl BoM 961511 - 800
280930-1 Cowl - Hi-Top Mild Steel 1

280930-2 Cowl - Hi-Top Chrome Steel (4003) 1
280930-3 Cowl - Hi-Top Stainless Steel (316) 1
2 282225-1 Cowl Seal 1

3 282397-1 Cowl/Fan Case Seal 1
4 42613-1 Radiator Rubber Seal 1

5 42610-1 Radiator Rubber Clamp 1
10 124-135 Screw M8 x 20 17
420-14 Nut M8 17
11 281196-1 Sound Attenuation Kit - Lo-Top Cowl - 500, 605 Series 1

280805-1 Sound Attenuation Kit - Hi -Top Cowl - 650 Series 1
281200-1 Sound Attenuation Kit - 800 1
12 283-23 Retainer Nail 100
283-25 Retainer Cap 100
Notes

VT & VS - Parts
Cowl Common Parts (2) - Wafer Pack and Wear Plates
3
3
8
13
15 16
14 7
1 6
2 12
17
9
4
10
15
11
5
18
22
19
20
21
95BD. 003-3

VT & VS - Parts
Cowl Common Parts (2) - Wafer Pack and Wear Plates
Bom’s 951511, 961511
1 295371-1 Cowl Hood/Wafer Pack Assembly - Comprising Items 2-12
2 282370-1 Wafer Plate 2

3 295369-1 Hood 1
4 282955-1 Stud 6
282385-1 Sound Attenuating Foam Kit - Comprising Items 5-8
5 282385-5 Sound Attenuating Foam - Wafer Panels 4
6 282385-2 Sound Attenuating Foam - Hood Rear Section 1

7 282385-3 Sound Attenuating Foam - Hood Mid Section 1
8 282385-4 Sound Attenuating Foam - Hood Front Section 1
9 295368-1 Retainer Strip 2

10 283307-1 Spacer - Black Nylon 12
> 11 425-15 Nut - Nyloc M10 6
457-5 Washer - Extra Large Ø10 6
12 283-25 Retainer Cap 64
13 280905-3 Spacer Hood Pivot 2

14 124-137 Screw M8 x 25 2
15 124-135 Screw M8 x 20 2
425-14 Nut - Nyloc M8 2
16 280537-1 Hood Stay 1

17 124-185 Screw M10 x 90 1
425-15 Nut M10 1
18 42739-1 Cover Plate - Hydraulic Tank Access 1

135-56 Screw M6 x 12 5
19 61005-1 Wear Plate - 800 Series 1

42663-1 Wear Plate - 500,605,650 Series 1
20 135-60 Screw M10 x 20 2
420-15 Nut M10 2
21 124-203 Screw M12 x 30 4

22 124-171 Screw M10 x 30 6

VT & VS - Parts
Cowl Configuration - Intake Duct Flaps
BoM 951512 - 500, 605, 650

BoM 961512 - 800
Single Sweep without Powered Flap Plate - Items 1 to 5:
1 42940-1 Blanking Plate 2

2 138-91 Screw M6 x 12 8
460-8 Washer - Spring M6 8
3 42956-1 Blanking Plug 2
4 40250-1 Blanking Plate 2

5 124-139 Screw M8 x 30 8

VT & VS - Parts
Cowl Configuration - Intake Duct Flaps
BoM 951512 - 500, 605, 650

BoM 961512 - 800
Single and Dual Sweep with Powered Flap Plate - Items 6 to 25:
Single Dual
6 283299-1 Cover Plate 1 2

7 287-38 Grommet 2 4
460-8 Washer - Spring M6 4 8
8 138-91 Screw M6 x 12 4 8
460-8 Washer - Spring M6
9 63523-1 Flap Bearing 1 2

10 124-139 Screw M8 x 30 4 8
11 29128-2 Bush 1 2
12 281030-1 Bracket - 800 Series 1 2

42216-1 Bracket - 500, 605, 650 Series 1 2
13 124-135 Screw M8 x 20 4 8
420-14 Nut M8 4 8
14 280840-1 Pneumatic Cylinder 1 2

15 29149-1 Pin - Spares item only 1 2
16 39624 Spring Clip - Spares item only 1 2
17 273-20 Tube - Pneumatics Ø6 Blue 2m 4m
18 280424-1 Lever 1 2
19 40456-2 Bar 1 2
20 124-179 Screw M10 x 60 2 4
21 124-208 Screw M12 x 45 1 2

420-16 Nut M12 1 2
22 42733-1 Bush 1 2
23 40442-12 Shaft 1 2
24 282577-1 Flap Plate 1 2
25 40516-1 Clip - Hairpin 2 4
26 277-47 Connector - located at pivot point at rear of subframe 2 4

VT & VS - Parts
Body Discharge - Hydraulic Hoses
53 54
C1B REAR DOOR LOCKING

C2B SEQUENCE VALVE & MANIFOLD
V2 SEE CHAPTER 28
32
C1A V1
C2A 33
47 48
55
52
51
53
54
54
53
49 32 45
33 46
50
48
47
T Y
F CT17
Z
*34
W SP
R
P
* 02 B2
49
50
VS A2
CT23 V
A1 B1 O 45 46
P2 M
CT25
L 33 32
CT1 J
95HH. 003-3
K

VT & VS - Parts
Body Discharge - Hydraulic Hoses
Subframe - BoM 950714
Item No. Part No. Description
32 HC04001-352 Hydraulic Hose

Body - BoM 950611, BoM 960611

Body Prop - BoM 950720, BoM 960720

Rear Door - BoM 950813

55 HCO4002-28 Hydraulic Hose
Notes
* For hoses 02(VS) and 34 see Emergency Discharge Pump, chapter 28.

VT & VS - Parts

VT & VS - Parts
CHAPTER 21
Subframe/Body Prop
Table of Contents
Section Page
Subframe
Subframe Assembly 21 : 2
Body Prop
Auto Release Body Prop 21 : 5
Page Issue 02 Chapter - Subframe/Body Prop 21:1

VT & VS - Parts
Subframe Assembly
29
14,15
‘B’
15 14 7
12 13 30
SEE 9a 8 9b
CHAPTER 25
10 11 7
7
1
6 7 17
27 26
18
16
23 24 ‘A’
20 2
19
21
22
28
25 3 95SF. 001-6
4
5
Dimension ‘A’ Side Rail Lengths
VT500 only = 3060

VT605/650/800 Short = 3245 Medium = 3635 *Long = 4085
Lengths are chassis dependent.
* Long rails used when additional water tank is fitted.
Dimension ‘B’ Side Rail Widths
Standard = 864, using outer fixing holes in Items 3, 6, 35, 36

Narrow = 790, using inner fixing holes in Items 3, 6, 35, 36
21:2 Chapter - Subframe/Body Prop Page Issue 08

VT & VS - Parts
Subframe Assembly
Side Rails 940711 - 500 Series
1 294050-1 Side Rail LH 1

2 294051-1 Side Rail RH 1
Side Rails 950711 - 605, 650 Series
1 281512-1 Side Rail LH Short 1

281512-2 Side Rail LH Medium 1
281512-3 Side Rail LH Long 1
2 281513-1 Side Rail RH Short 1
281513-2 Side Rail RH Medium 1
281513-3 Side Rail RH Long 1
Side Rails 960711 - 800 Series
1 281759-1 Side Rail LH Short 1

281759-2 Side Rail LH Medium 1
281759-3 Side Rail LH Long 1
2 281758-1 Side Rail RH Short 1
281758-2 Side Rail RH Medium 1
281758-3 Side Rail RH Long 1
Crossmembers 950712, 960712
3 281511-1 Rear Pivot Member 1

4 281519-1 Stretch Plate 2
5 122-164 Bolt M14 x 45 8
6 283680-1 Centre Crossmember 1

> 7 122-164 Bolt M14 x 45 ) Also Used 12
404-17 Nut - Nyloc M14 ) with 12
455-13 Washer - Plain M14 ) Items 29 and 30 24
8 283790-1 Body Tip Mount - 605, 650 Series 1

283785-1 Body Tip Mount - 500, 800 Series 1
9a 124-203 Bolt M12 x 30 3
9b 124-199 Bolt M12 x 20 4
10 42432-1 Pivot Pin 1

11 124-134 Screw M8 x 16 1
Configuration 940713, 950713

Single Dual
12 280880-1 Bracket - Intake Seat 1 2

13 124-171 Screw M10 x 30 4 8
460-11 Washer - Plain M10 4 8
420-1 Nut M10 4 8

VT & VS - Parts
Subframe Assembly
Configuration 940713, 950713 - continued

Single Dual
14 281548-1 Manifold - Hydraulic 1 2

15 124-147 Screw M8 x 60 2 4
16 - Shuttle/Exhaust Valve Block - See Chapter 26 - 2

17 124-102 Screw M6 x 16 - 4
460-8 Washer - Spring M6 - 4
18 - Regulator - See Chapter 26 2 4
Services 950714
19 - Manifold - Water Relief Valve - See Chapter 30 1

20 - Water Relief Valve - See Chapter 30 1
21 - Water Filter Sub-Assembly - See Chapter 30 1

22 124-137 Screw M8 x 25 2
> 455-10 Washer - Plain M8 2
425-14 Nut - Nyloc M8 2
23 - Sequence Valve - 12 volt ) See 1

- Sequence Valve - 24 volt ) Chapter 28 1
24 281952-1 Plate 1
124-121 Screw M6 x 90 2
25 - Wanderhose Water Manifold - See Chapter 30 1

26 281653-1 Body Pump Bracket 1
27 124-169 Screw M10 x 25 4
28 806953-1 Serial Number Plate 1
Various - See Chapter 22.CP
29 281283-1 Engine Beam Front - Reference 1

30 281282-1 Engine Beam Rear - Reference 1

VT & VS - Parts
Auto Release Body Prop
2 13
3 4
SOCKET SPANNER 11
HOLE TO ENABLE
TIGHTENING OF
NUT 5
4 5 12
8
10
9
2
6
3,4,5
7
1
95SF. 003-4
BoM 960720
1 200475-3 Prop 500, 650 Series

281022-1 Prop - 800 Series 1
2 283445-1 Pivot Pin 2

3 124-137 Screw M8 x 25 2
5 425-14 Nut - Nyloc M8 2
6 21216-12 Cable 1
7 457-7 Washer - Large Ø14 1
500-103 Split Pin 1
8 94972-1 Plate Pulley 1

9 70484-1 Pulley 1
10 124-141 Screw M8 x 35 2
94971-1 Spacer 2
420-14 Nut - Nyloc M8 2
11 29345-1 Cylinder 1
12 124-139 Screw M8 x 30 2
420-14 Nut - Nyloc M8 2
13 421-7 Nut Lock M20F 2

VT & VS - Parts

VT - Parts
CHAPTER 22
Powapak
Table of Contents
Section
Iveco Engines
Standard Power Engine 22.PA : 1
High Power Engine 22.PA : 11
Standard and High Power Common Parts 22.PA : 21
John Deere Engines

Standard Power Engine 22.PB : 1
High Power Engine 22.PB : 13
Standard and High Power Common Parts 22.PB : 21
VT and VS Powapak Tub and Components 22.PC : 9
VT and VS Fan Impellers and Fan Case 22.PD : 1
VT Transmission 22.PE : 1
VS HydroDrive Transmission 22.PF : 1
VS Hydrostatic Components 22.PG : 1
Page Issue 07 Chapter - Powapak 22:1

VT - Parts
22:2 Chapter - Powapak Page Issue 05

VT - Parts
22.PA
Iveco Standard Power Engine
Table of Contents
Section Page
Standard Power Engine

Dressed Engine 22.PA : 2
Throttle Actuator 22.PA : 5
Ancillaries 22.PA : 6
Engine Management Box 22.PA : 8
Fuel Pre-Filter 22.PA : 10
Page Issue 05 Chapter - Powapak 22.PA:1

VT - Parts
Iveco Standard Power Dressed Engine and Spares Items
1 8 9
S3
23
21
19
S2
4
15
14 S6
11
7 5 3 10
S9
17
8
9 14
18 19
S4
20 16
S1
S8
S5
22
S7
15
2
4
6
7 5 95AE. 024-2
22.PA:2 Chapter - Powapak Page Issue 05

VT - Parts
BoM 950511
1 283850-24 Engine - Iveco N45MNS S3a 24v 66kW
2 282460-1 L.H. Rear Engine Mount 1

3 282460-2 R.H. Rear Engine Mount 1
4 124-205 Screw M12 x 35 8
460-12 Washer Spring 8
5 22826-1 Mount - Metacone 2
6 123-154 Bolt M12 x 80 2
460-12 Washer - Spring 2
457-6 Washer - Plain 2
7 124-171 Screw M10 x 30 4
420-15 Nut M10 4
8 282467-1 Radiator Hose - Top 1

9 501-5 Hose Clip 2
10 282468-1 Radiator Hose - Bottom 1

12 282595-1 Exhaust Inlet 1

13 124-137 Screw M8 x 25 4
14 282667-1 Fuel Line - Feed 1

501-104 Clip 1
15 282668-1 Fuel Line - Return 1
501-104 Clip 1
16 664-8 Pipe Clamp 1” 1

124-99 Screw M6 x 10 1
17 282042-1 Engine Loom 1

18 508-4 ‘P’ Clip 1
19 496-P02 Breather Pipe 1
501-3 Hose Clip 1
20 - Throttle Actuator - See over page 1
21 845-162 Water Temperature Sensor 1
KT00695 - Optional Oil Pressure / Water Temperature Gauge Pack
22 87-16 Oil Pressure Sender 1

283215-1 Adaptor 1
80-43 ‘O’ Ring 1
23 87-54 Water Temperature Sender 1
282043-1 Gauge Sender Loom (Not Shown) 1
282740-1 Water Temp./ Oil Press. Gauge - See Powapak Control

Panels, Chapter 32
Page Issue 05 Chapter - Powapak 22. PA:3

VT - Parts
Spares Items
S1 845-144 Fuel Filter

S2 845-145 Thermostat
845-146 Thermostat Seal
S3 845-151 Oil Filler Cap
845-152 Oil Filler Seal
S4 845-147 Rocker Cover Gasket

S5 281942-1 Oil Pressure Switch
283215-1 Adaptor
80-43 ‘O’ Ring
S6 845-158 Alternator/Fan Belt
S7 845-195 ESOS Valve 24V
S8 845-194 KSB Solenoid 24V
S9 - Oil Filter - See 22.PA Common Parts Section
Notes
22. PA:4 Chapter - Powapak Page Issue 05

VT - Parts
Throttle Actuator - Iveco Standard Power Engine
7 9 8 10
6 5,6 4
9 11 95AE. 016-3
BoM 950511
1 283150-1 Actuator Mount 1

2 124-167 Screw M10 x 20 2
3 281729-2 Actuator Assembly 24v 1

4 281707-1 Actuator Side Plate 1
5 42774-4 Spacer x 36 Long 1
6 124-102 Screw M6 x 16 4
7 455-8 Washer - Plain. Act as spacers between 3
Actuator/Mount and Actuator/Side Plate
8 281728-1 Throttle Cable 1

9 38-32 Solderless Nipple 3
10 837-47 Fork 1
11 837-48 Pin 1
837-49 Split Pin 1

VT - Parts
Ancillaries - Iveco Standard Power Engine
20
16
15
S1
5
8
10
19
17
2
16
18
7
13
4
14
11 3
22 1
12 21
6 9 95AE. 023-2
2 3

VT - Parts
Ancillaries - Iveco Standard Power Engine

BoM 950511
1 281562-2 Walkway 1
2 281600-1 Support Strip 2
3 138-125 Screw - Button Head M8 x 25 9
425-14 Nut - Nyloc M8 4
4 211-12 Anti - Slip Surface x 0.03m 1
5 295115-1 Radiator Shroud 1

6 124-167 Screw M10 x 20 2
7 124-167 Screw M10 x 20 2
425-15 Nut - Nyloc M10 2
8 200923-1 Radiator 1
9 124-166 Screw M10 x 16 2
10 124-169 Screw M10 x 25 2
11 295095-1 Air Cleaner 1

12 124-137 Screw M8 x 25 4
13 295048-1 Air Intake Pipe 1
14 507-6 Hose Clamp 95-118mm 1
15 507-4 Hose Clamp 70-92mm 1
16 295067-1 Exhaust Inlet Pipe 1

> 17 124-135 Screw M8 x 20 3
18 295071-1 Heat Shield 1
124-100 Screw M6 x 12 2
19 295066-1 Silencer 1
20 6645-14 Exhaust Clip 2 3/4” 1
21 - Restriction Indicator - See 22.PA Common Parts Section 1
22 - Engine Management Box - see over page
Air Filter Spares
S1 - Main Element

VT - Parts
Engine Management Box - Standard Power
1 2 9
11 D23 D20 D29
10
RS
16 12
3 RA T7
13
6
R9 T6 14
15
FUSE
4,5
RB RC
R0 RF
7
8
D22 D26
11
11
10
95EC. 006-8
1
2
3
4

VT - Parts
Engine Management Box - Standard Power
BoM 950511
Powapak Parts
282134-1 Engine Management Box 24v comprising:-
1 282122-1 Box and Lid 1

134-44 Screw Pan Head M4 x 20 4
425-11 Nut-Nyloc M4 4
2 282125-1 Mounting Plate 1
3 710-67 HDP 31 Way Socket Housing 1

710-70 Jam Nut 1
281545-2 Sealing Washer 1
4 30-267 Fuse Holder 1

5 30-268 Midi Link 30 Amp 1
6 134-43 Screw M4 x 16 2
455-5 Washer Plain 2
425-11 Nut Nyloc M4 2
7 48-89 Relay Base 6

12926 Relay 24 x Type 6RA 6
8 134-42 Screw Pan Head M4 x 12 2
425-11 Nut - Nyloc M4 2
9 30-256 4 Way Terminal Block 10

30-254 End Plate - Terminal Block 2
425-10 Nut - Nyloc M3 4
11 13984 Diode 6 Amp 5

12 48-34 Relay 12v 1
48-36 Relay 24v 1
420-11 Nut M4 4
14 13981 Timer Relay 12v 2

13982 Timer Relay 24v 2
13983 Relay Base 2
15 283198-1 Timer Relay Bracket 2
16 124-39 Screw M4 x 20 1
420-11 Nut M4 1
425-11 Nut - Nyloc M4 1

VT - Parts
Fuel Pre-Filter Installation - Standard Power
2
1 5
5 3 S1
2 6
9 8
95AE. 018-2
7
BoM 950511
2 124-135 Screw M8 x 20 4
425-14 Nut-Nyloc M8 4
3 15314-1 Pre-Filter 1
4 42683-4 Fuel Pipe 1

5 25977-1 Nut - Sleeve 2
511-4 Olive 2
6 40448-1 Adaptor 1
451-17 Washer - Sealing 1
510-4 Nut - Sleeve 1
511-4 Olive 1
7 283938-1 Fuel Return Pipe 1

8 282668-1 Return Hose 1
9 282667-1 Feed Hose 1
Spares Items
S1 15314-1 Pre-Filter (Item 3)

VT - Parts
22.PA
Iveco High Power Engine
Table of Contents
Section Page
High Power Engine

Dressed Engine 22.PA : 12
Spares Items 22.PA : 14
Ancillaries 22.PA : 16
Engine Management Box 22.PA : 18
Fuel Pre-Filter Installation 22.PA : 20

VT - Parts
Iveco High Power Dressed Engine
24 16 14 1
23
10
15
11
25
4
3
6
13
5 12
7
9
17 8
19 22 20
28 29 34 30 32,33
18
20
21 19
25
27
13 26
12 31,32
4
6
2 95AE. 014-3
7 5

VT - Parts
Iveco High Power Dressed Engine

BoM 950511/012
1 283805-24 Engine - Iveco N45ENTX S3a 24v 104kW
2 281450-1 L.H. Rear Engine Mount 1

3 281450-2 R.H. Rear Engine Mount 1
4 124-205 Screw M12 x 35 8
5 22826-1 Mount - Metacone 2

6 123-154 Bolt M12 x 80 2
7 124-171 Screw M10 x 30 4
420-15 Nut M10 4
8 281506-1 Radiator Hose - Bottom 1

9 501-5 Hose Clip 2
10 281507-1 Radiator Hose - Top 1
12 281561-1 CAC Hose 1
14 87-59 Switch - Water Temperature 1

845-216 Insert 1
845-217 Washer - Copper 1
15 283859-1 Turbocharger Charge Air Outlet Adaptor 1
17 283851-1 Engine Loom 24v 1
18 271-38 Cuff 2
20 295480-1 Charge Air Pipe 1
21 281708-1 Pipe Support 1
124-166 Screw M10 x 16 2
22 6645-12 Exhaust Clip 2 1/2” 1
23 904-51 Rubber Elbow 45o 1

> 24 507-4 Hose Clip 2
25 295415-1 Induction Air Tube 1
26 904-8 Rubber Elbow 90o 1
> 27 507-4 Hose Clip 2
28 497-P02 Hose 3/4” x 0.06 1

29 231-42 Elbow 3/4” 1
30 497-P02 Hose 3/4” x 0.45 1
31 281939-1 Bracket 1
32 124-99 Screw M6 x 10 3
420-13 Nut M6 1
33 664-8 Pipe Clamp 1” 1

VT - Parts
Iveco High Power Engine - Spares Items
S6 S5
S12
S13 S9
S11 S8 S3
S7
S14
S1
S4
S5
S16
S10 S15
S2
95AE. 022-3

VT - Parts
Iveco High Power Engine - Spares Items
> S1 - Oil Filter - See 22.PA Common Parts Section

S3 845-153 Thermostat
845-146 Thermostat Seal
S4 845-149 Oil Filler Cap

S5 845-150 Rocker Cover Gasket
S6 845-148 Oil Level Dipstik
S7 845-142 Alternator/Fan Belt

> S8 - Alternator 28v - See 22.PA Common Parts Section
S9 845-161 Water Temp. Sensor
S10 845-160 Oil Sensor
S11 845-108 Clamp

S12 845-109 ‘O’ Ring - Used with item 15
S13 845-110 Clamp
> S14 - Starter Motor 24v - See 22.PA Common Parts Section
S15 - Flywheel
> - Starter Ring Gear - See 22.PA Common Parts Section
S16 845-183 Blow-By Filter Kit
Notes

VT - Parts
Ancillaries - Iveco High Power Engine
S5
S3
S2
S5
S4
S1
13
15
5
8
14
7
12
2
4
10
11
3
16
9
6 17
1
2 3 95AE. 015-5

VT - Parts
Ancillaries - Iveco High Power Engine
BoM 950511
1 281562-2 Walkway 1
425-14 Nut - Nyloc M8 4

6 124-167 Screw M10 x 20 2
7 124-167 Screw M10 x 20 2
425-15 Nut - Nyloc M10 2
8 281570-1 Radiator / Intercooler 1

9 124-166 Screw M10 x 16 4
10 280850-1 Combi Filter Assembly 1

11 124-167 Screw M10 x 20 2
12 - Induction Air Tube and Fittings ) See Dressed

13 - Exhaust Inlet Pipe ) Engine
14 281418-1 Silencer 1
> 15 6645-15 Exhaust Clip Ø65 1
16 - Restriction Indicator - See 22.PA Common Parts Section

17 - Engine Management Box - See over page
Air Filter Spares
S1 280850-2 Main Element

S2 280850-3 Safety Element
S3 280850-4 Housing
S4 280850-5 Wing Bolt Kit - Metric
S5 280850-6 Element Nut Kit - Imperial

VT - Parts
Engine Management Box - Iveco High Power Engine
9 6
T7 T6
RS
7
8
D26
RA
5
14 K1
D40
D43
RFh
11
4
D41
RC
D42
3 R20
10
R21
15 R22 12
13 1
2
17 16 18
95EC.005-5

VT - Parts
Engine Management Box - Iveco High Power Engine
BoM 950511
283852-1 Engine Management Box 24v comprising:-
1 283848-1 Box and Lid 1

2 134-44 Screw - Pan Head M4 x 20 4
425-11 Nut - Nyloc M4 4
3 283857-1 Engine Management Box Loom 1
4 725-153 Micro Relay 24v 10/5 Amp 7

5 134-40 Screw Pan Head M4 x8 2
420-12 Nut M4 2
6 13982 Timer Relay 24v 2

7 283198-1 Timer Support 2
8 48-36 Relay 24v 1

420-12 Nut M5 2
10 30-256 4 Way Terminal Block 10

30-254 End Plate 2
11 13984 Diode 6 Amp 5
425-10 Nut - Nyloc M3 4
13 283894-1 Support Frame 1
14 134-60 Screw - Pan Head M5 x 25 1

455-7 Washer - Plain
425-12 Nut - Nyloc M5
15 134-41 Screw - Pan Head M4 x 10 2

425-11 Nut - Nyloc M4 2
16 282130-1 Resistor Board 1

30-280 Board Support 4
17 30-281 Snap Rivet 4
18 134-12 Screw - Pan Head M3 x 10 4

VT - Parts
Fuel Pre-Filter Installation - Iveco High Power Engine
10
S1
6
5 9
4
7 2
1 95AE. 013-2
BoM 950511
1 281487-1 Suction Pipe 1

2 451-17 Washer - Sealing 1/4” BSP 1
3 282488-1 Fuel Hose 1
4 277-85 Straight Connector x Ø10 1
5 42683-3 Return Pipe 1

6 40448-1 Adaptor 1/4” BSP x Ø8 1
451-17 Washer - Sealing 1/4” BSP 1
510-4 Tubing Nut Ø8 1
511-4 Tubing Sleeve Ø8 1
7 277-48 Straight Connector x Ø8 1

9 124-171 Screw M10 x 30 2
420-15 Nut M8 2
10 124-139 Screw M8 x30 2
420-14 Nut M8 2
Spares Items
> SI 845-206 Fuel Pre-Filter

VT - Parts
22.PA
Common Parts
Iveco Standard and High Power Engines
Table of Contents
Section Page
Engine
Engine and Transmission 22.PA : 22
Exhaust Components 22.PA : 24
P.T.O. Pumps 22.PA : 26
Pump Installations 22.PA : 27
Filter State Indicator 22.PA : 28

VT - Parts
Common Parts - Iveco Standard and High Power Engines
S3
7,8
S2 9
15
11 S1
12 2
14 3 5
13 10 6
4
HIGH POWER ENGINE SHOWN
16
3
1
5
4
6
95AE. 011-3 S4

VT - Parts
Common Parts - Iveco Standard and High Power Engines
BoM 950511
1 281448-1 L.H. Front Engine Mount 1

2 281448-2 R.H. Front Engine Mount 1
3 124-205 Screw M12 x 35 6
4 6953 Mount - Metacone 2

5 123-154 Bolt M12 x 80 2
6 124-171 Screw M10 x 30 4
420-15 Nut M10 4
7 281-7 Cooling Fan 1

8 281458-1 Cooling Fan Spacer 1
9 129-166 Cap Screw M10 x 70 4
10 282513-1 Adaptor M22 x 3/4” 1

282513-2 ‘O’ Ring 1
11 HE12003-57 Hose 1
12 62903-1 Drain - Engine 1
13 7684-1 Collar Plug 1/2” BSP Brass 1
451-19 Washer Sealing 1
14 124-167 Screw M10 x 20 1

420-15 Nut M10 1
15 282034-3 Alternator Cable 1
16 - Fluid Coupling and Fan Drive Gearbox - See

VT Transmission Section 22.PE
Spares Items
S1 845-100 Oil Filter

S2 845-103 Starter Motor 24v
S3 845-104 Alternator 28v
S4 - Flywheel
845-159 Starter Ring Gear

VT - Parts
Common Parts - Exhaust Components
6
1
5
6 4
5
2,3,4 2
4 6 11 10
3
8
9
95AE. 021-2
7
BoM 950520 and 960520
1 42649-3 Tailpipe - VT 500, 605 1

42649-1 Tailpipe - VT 650 1
281946-1 Tailpipe - VT 800 1
2 200063-1 Support - VT 500, 605, 650 1

281945-1 Support - VT 800 1
3 124-169 Screw M10 x 25 2
426-5 Nut - Philidas M10 2
> 4 6645-13 Exhaust Clamp 2 5/8” 2

5 42647-1 Heat Sheild 1
6 124-100 Screw M6 x 12 3

VT - Parts
BoM 950511
7 295444-1 Mount 1
8 903-9 Mounting Band 1
9 124-135 Screw M8 x 20 4
420-14 Nut M8 4

11 124-100 Screw M6 x 12 4
Notes

VT - Parts
P.T.O. Pumps - Iveco Engines
1 6 1 6
3 5
2
4 4
IDENTIFICATION -
95HC. 019-6 FLANGE PROFILE
BoM 950514

Single Tandem
1 239-27 Pump - Single 1 -

239-34 Pump - Tandem - 1
2 265-16 Adaptor 1 1/4” x 3/4” 1 -

451-21 Washer - Sealing 3/4” 1 -
3 263-8 Adaptor 1 1/4” - 1

451-111 Washer - Sealing 1 1/4” - 1
> 4 262-8 Swivel Elbow 1 1/4” x 90o 1 1
5 263-4 Adaptor 1/2” 1 2

451-19 Washer - Sealing 1/2” 1 2
6 129-156 Screw Cap Skt Head M10 x 30 2 2

460-11 Washer - Spring 2 2

VT - Parts
PTO Pump Installations - Iveco Engines
2
SINGLE
PUMP
11
12 1
2
TANDEM
PUMP
1
4
13
3
11
95HC. 018-2
10
BoM 950515

Single Tandem
1* HX 20002-94 Suction Hydraulic Hose 1 1

2* HCO8002-108 Sweep Systems Hydraulic Hose 1 1
3* HCO8002-91 Auxiliary Systems Hydraulic Hose 1
4* HE12001-122 Tank Return Hydraulic Hose 1 1
5-9 -
10 - Hydraulic Tank - See chapter 28
11 264-4 1/2” Bulkhead Adaptor + Locknut 2 2

13 262-6 Swivel Elbow 3/4” 1 1
Notes
*Hose item numbers correspond with those in Hydraulic diagrams SH521a01

and SH531a01 in Chapter 8.

VT - Parts
Common Parts - Filter State Indicator
4
3
95AE. 025
2
BoM 950511
1 904-55 Restriction Indicator 1

2 904-59 Mount 1
3 124-103 Screw M6 x 20 2
425-13 Nut - Nyloc M6 2
4 904-56 Connector 1
5 904-58 Adaptor 1
6 12870 Nylon Tube - Black Ø8 x 0.8m 1

VT - Parts
22.PB
John Deere Standard Power Engine
Table of Contents
Section Page
Standard Power Engine

Dressed Engine 22.PB : 2
Throttle Actuator 22.PB : 4
Ancillaries 22.PB : 5
Air Cleaner Installation 22.PB : 6
Engine Management Box 22.PB : 8
Page Issue 07 Chapter - Powapak 22.PB:1

VT - Parts
John Deere Standard Power Dressed Engine
2 18
1
10
15
S1 4,5
13
16 S2
7
17
14 Spares Items ‘S’
3 see end of parts list
6
9 11
19
5
12
8
14
13
20 95AE. 007-3
22.PB:2 Chapter - Powapak Page Issue 07

VT - Parts
John Deere Standard Power Dressed Engine
BoM 950511
1 283845-12 John Deere 4045TF 280 12v (63 kW) Engine
2 280088-1 Hose - Radiator Inlet - Top 1

3 280089-1 Hose - Radiator - Lower 1

5 282587-1 Spacer - Cooling Fan 1

7 281224-1 Starter Cable 1
9 282590-1 Temperature Switch 1
8 281942-1 Oil Pressure Switch 1
10 848-24 Lift Pump Adaptor 1

11 282692-1 Fuel Return Hose 1
12 - Air Inlet Elbow - See ‘Air Cleaner Installation’

elsewhere in this section
13-20 - These items are shown in the engine ‘Common Parts

section elsewhere in this chapter.
Spares Items

S2 848-22 Oil Filter
Notes

VT - Parts
Throttle Actuator - John Deere Standard Power Engine
11
10
9 1
13
12
4 5
8 2
7
95AE. 008 3
BoM 950511
1 282643-1 Throttle lever 1

2 282645-1 Actuator Mount 1
3 124-263 Screw M16 x 20 2
460-14 Washes - Spring 2
4 281729-12 Throttle Actuator 12v 1

5 282644-1 Actuator Lever 1
6 281707-1 Actuator Side Plate 2
7 42774-4 Spacer x 36 1
8 124-100 Screw M6 x 12 2
9 124-101 Screw M6 x 16 2
10 281728-1 Throttle Cable 1

11 38-32 Solderless Nipple 3
12 837-47 Fork 1
13 837-48 Pin 1
837-49 Split Pin 1

VT - Parts
Ancillaries - John Deere Standard Power Engine
10 1
4
7
5
9
12 8
11
2 6
95AE. 027
7
BoM 950511

2 124-167 Screw M10 x 20 2
3 124-169 Screw M10 x 25 2
425-15 Nut - Nyloc M10 2
4 200923-1 Radiator 1
5 124-166 Screw M10 x 16 4
6 282605-1 Walkway 1
425-14 Nut - Nyloc M8 4
9 211-12 Anti-slip Surface x 1240 Long 1
10 - Air Filter and Prefilter Installation - See over page

11 - Engine Management Box - See elsewhere in this section
12 - Restriction Indicator - See 22.PB Common Parts section

VT - Parts
Air Cleaner Installation
8 2
9 4
76
S1
S2 1
21
26 10
22
26 15
12
14
24 13
11
23
26 20
26
25 19 17 16
18 95AE. 009

VT - Parts
Air Cleaner Installation
BoM 950511
1 281048-1 Air Filter Mount Assembly comprising items 2 - 9:-

2 280125-1 Mounting Bracket 1
3 281047-1 Pivot Bracket 1
4 436-10 Catch 1
5 134-44 Screw M4 x 20 Pan Head 8
425-11 Nut - Nyloc M4 8
6 124-135 Screw M8 x 20 2
7 441-1 Screw M8 x 4 Insert 2
8 425-14 Nut - Nyloc M8 2
9 455-10 Washer Plain 4

11 124-135 Screw M8 x 20 4
12 904-58 Adaptor 1
13 904-23 Pre Cleaner 1

14 282497-1 Securing Ring 1
15 123-98 Bolt M6 x 100 3
425-13 Nut - Nyloc M6 3
17 124-103 Screw M6 x 20 2
457-2 Washe - Plain 2
425-13 Nut - Nyloc M6 2
18 904-55 Restriction Indicator - 7.5kPa 1
19 12870 Tube - Black Nylon 8 O/D x 0.8 1
20 276-13 Flexible Ducting 1

21 61096-3 Elbow - Rubber 1
22 280154-1 Pipe - Air Inlet 1
23 904-12 Elbow 3 1/2” 1
24 280156-1 Elbow - Air Inlet 1
25 61096-3 Elbow - Rubber 1
Spares Items
S1 61026-3 Safety Element

S2 94954-2 Main Element

VT - Parts
Engine Management Box - John Deere Standard Power Engine
2 1 3 8
13 13 RC
9
D23 D33
11
12 RZ FP
R1
5 EP
15 RA
4
7 R9
6,7 F21
13 D22 D26 13 RB 14
10 RS
12
R0
2
4
3
1
9 8 95EC.004-8

VT - Parts
Engine Management Box - John Deere Standard Power Engine
BoM M010511
282137-1 Engine Management Box 12v Comprising:-
1 283848-1 Box and Lid 1

425-11 Nut - Nyloc M4 4

4 283843-1 Loom 1
5 721-12 Resistor 50R 50 Watt 1

425-11 Nut - Nyloc M4 4
9 13193 Relay 7
10 30-256 Terminal Block - 4 Way 4

30-254 Terminal Block - End Plate 1
425-10 Nut - Nyloc M3 4
13 13984 Diode 6 Amp 4

14 48-34 Relay 1
15 134-60 Screw Plan Head M5 x 25 1

420-12 Nut M5 1
425-12 Nut - Nyloc M5 1
Notes

VT - Parts

VT - Parts
22.PB
John Deere High Power Engine
Table of Contents
Section Page
High Power Engine

Dressed Engine 22.PB : 12
Ancillaries 22.PB : 14
Engine Management Box 22.PB : 16

VT - Parts
John Deere High Power Dressed Engine
4 2 21 6
1
13
18
S1 7,8
16
19 S2
9
20 Spares Items ‘S’
17 3
4 see end of parts list
6
10
2
7
24
12
8
22
15
6
14
5
17
16
25 95AE. 029

VT - Parts
John Deere High Power Dressed Engine
BoM 950511
1 283791-12 John Deere 4045HF 285 12v (86 kW) Engine
2 283929-1 Hose - Radiator Inlet - Top 1

3 283931-1 Hose - Radiator - Lower 1
4 283933-1 Charge Air Hose - Top 1

5 283932-1 Charge Air Hose - Bottom 1
6 507-4 Hose Clamp 3” 4

8 295102-1 Spacer - Cooling Fan 1

11 283994-1 Water and Fuel Extension Loom 1
12 282692-1 Fuel Return Hose 1
13 295064-1 Alternator Mounting Bracket 1
14 61096-3 Elbow 1
> 507-4 Hose Clamp 3” 2
15 - Air Cleaner Pipe - See ‘Air Cleaner Installation’

16-25 - These items are shown in the ‘Common Parts section

elsewhere in this chapter.
Spares Items
S1 - Fuel Filter
S2 - Oil Filter
Notes

VT - Parts
Ancillaries - John Deere High Power Engine
8
S1
15 16
5 9
13
14 7
11 2
12
1
17
3
4
6 10
18
95AE. 026
2 3

VT & VS - Parts
Ancillaries - John Deere High Power Engine
BoM 950511
1 283934-1 Walkway 1
425-14 Nut - Nyloc M8 4

6 124-167 Screw M10 x 20 2
7 124-167 Screw M10 x 20 2
425-15 Nut - Nyloc M10 2
8 217-2 Rubber Seal x 1.2m 1
9 295065-1 Radiator / Intercooler 1

10 124-166 Screw M10 x 16 4

12 124-137 Screw M8 x 25 4
13 904-62 Elbow 1
14 507-6 Hose Clamp 4” 1
15 507-4 Hose Clamp 3” 1
16 284130-1 Air Cleaner Pipe 1
17 - Restriction Indicator - See 22.PB Common Parts section
18 - Engine Management Box - See over page
Air Filter Spares
S1 - Main Element
Notes

VT - Parts
Engine Management Box - John Deere High Power Engine
16
FP
8
RS
RC 6,7
FUSE
9 RA
RT2 4
10 10 FE-2
20 FE-3
RT1
11 RZ
15 3 1 2
13
14
D22 17
15 D26
5
D34 R1
14 12 3 95EC.013

VT - Parts
Engine Management Box - John Deere High Power Engine
BoM 950511
283992-1 Engine Management Box 12v Comprising:-
1 283848-1 Box and Lid 1

425-11 Nut - Nyloc M4 4

4 283993-1 Loom 1
5 721-12 Resistor 50R 50 Watt 1

425-11 Nut - Nyloc M4 4
9 13193 Relay 6
10 282171-1 Resistor Board Assembly 1

11 30-280 Snap Rivet 4

13 30-254 Terminal Block - End Plate 1
425-10 Nut - Nyloc M3 6
15 13984 Diode 6 Amp 3

16 48-34 Relay 1
17 134-60 Screw Plan Head M5 x 25 1

420-12 Nut M5 1
425-12 Nut - Nyloc M5 1
Notes

VT - Parts

VT - Parts
22.PB
Common Parts
John Deere Standard and High Power Engines
Table of Contents
Section Page
Engine Ancillaries
Engines and Transmission 22.PB : 20
Exhaust Components 22.PB : 22
P.T.O. Pumps 22.PB : 24
Pump Installations 22.PB : 25
Filter State Indicator 22.PB : 26
Fuel Pre-Filter Installation 22.PB : 27
Heat Start Relay and Cables 22.PB : 28

VT - Parts
Common Parts - John Deere Standard and High Power Engines
13
25
11
8
9
12
10
15 14 5
32
13 13
26 6 4
STANDARD POWER ENGINE SHOWN
17 24
27
18
16
5
1
3 11
6 7
4 9
12
19 10
22
20 23
21 95AE. 007-2

VT - Parts
Common Parts - John Deere Standard and High Power Engines
BoM 950511
1 280150-4 Bracket - Engine Mounting LH Front 1

2 280150-2 Bracket - Engine Mounting RH Front 1
3 124-199 Screw M12 x 20 6
4 6953 Mount - Metacone 2
5 123-151 Bolt M12 x 65 2
6 124-171 Screw M10 x 30 4
460-11 Washer-Spring 4
420-15 Nut M10 4
> 7 284125-1 Bracket - Engine Mounting LH Rear 1

> 8 284125-2 Bracket - Engine Mounting RH Rear 1
9 124-199 Screw M12 x 20 8
10 22826-1 Mount Metacone 2
11 123-152 Bolt M12 x 70 2
12 124-171 Screw M10 x 30 4
420-15 Nut M10 4

14 282044-1 Cable - Relay to Heat Start 1
15 281224-2 Earth Cable 1
16 283401-1 Extender Adaptor 1
17 280153-1 Air Inlet Bracket 1

18 6645-21 Exhaust Clamp 3 5/8” 1
19 270-8 Adaptor M18 x 3/4” 1

20 HE12003-80 Hydraulic Hose 1
21 62903-1 Drain 1
22 7684-1 Collar Plug 1/2” BSP Brass 1
23 124-167 Screw M10 x 20 1
420-15 Nut M10 1

25 282689-1 Fuel Suction Hose 1
26 282697-1 Adaptor G 1/4” 1

848-21 Seal 1
27 - Fluid Coupling and Fan Drive Gearbox - See

VT Transmission Section 22.PE

VT - Parts
6
1
5
6 4
5
2,3,4 2
13 6 11 10
3
8
12
13
9 14
95AE. 021-3
7
BoM 950511,950520 and 960520
1 42649-3 Tailpipe - VT 500, 605 1

42649-1 Tailpipe - VT 650 1
281946-1 Tailpipe - VT 800 1
2 200063-1 Support - VT 500, 605, 650 1

281945-1 Support - VT 800 1
3 124-169 Screw M10 x 25 2
426-5 Nut - Philidas M10 2
4 6645-13 Exhaust Clamp x 67 I.D.(2 5/8” ) 1

5 42647-1 Heat Sheild 1
6 124-100 Screw M6 x 12 3

VT - Parts
BoM 950511
7 295444-1 Mount 1
8 903-9 Mounting Band 1
9 124-135 Screw M8 x 20 4
420-14 Nut M8 4

11 124-100 Screw M6 x 12 4
12 283781-1 Silencer 1
13 6645-14 Exhaust Clamp x 70 I.D. (2 3/4”) 2
14 - Inlet Pipe - See previous page. -
Notes

VT - Parts
Common Parts - P.T.O. Pumps
1 6 1 6
3 5
2
4 4
IDENTIFICATION -
95HC. 019-5 FLANGE PROFILE
BoM 950514

Single Tandem
1 239-27 Pump - Single 1 -

239-34 Pump - Tandem - 1
2 265-16 Adaptor 1 1/4” x 3/4” 1 -

451-21 Washer - Sealing 3/4” 1 -
3 263-8 Adaptor 1 1/4” - 1

451-111 Washer - Sealing 1 1/4” - 1
4 262-8 Swivel Elbow 1 1/4” x 90o 1 1
5 263-4 Adaptor 1/2” 1 2

> 6 129-156 Screw Cap Skt Head M10 x 30 2 2


VT - Parts
Common Parts - PTO Pump Installations
5 LH. FRONT ENGINE

MOUNTING BRACKET
ENGINE POSITION 4
8
3
1 2 7
TANDEM
PUMP 6
2 SINGLE
PUMP
1
95HC. 020-4
BoM 950514

Single Tandem
1* HX 20002-175 Suction Hose 1 1

2* HC08000-114 Sweep Systems Hose 1 1
3* HC08002-170 Auxiliary Systems Hose - 1
4* HE12001-122 Tank Return Hose 1 1
5 262-6 Swivel Elbow 3/4” 1 1

8 508-12 ‘P’ Clip 1 1
Notes
* Hose numbers in circles correspond with those on Hydraulic diagrams

SH521a01 and SH531a01 in Chapter 8.

VT - Parts
Common Parts - Filter State Indicator
4
3
95AE. 025
2
BoM 950511
1 904-55 Restriction Indicator 1

2 904-59 Mount 1
3 124-103 Screw M6 x 20 2
425-13 Nut - Nyloc M6 2
5 904-58 Adaptor 1
6 12870 Nylon Tube - Black Ø8 x 0.8m 1

VT - Parts
Common Parts - Fuel Pre-Filter Installation
4 S1 8
95AE. 013-3
BoM 950511
1 282629-1 Plate - Pre-Filter Mounting 1

2 124-134 Screw M8 x 16 2
425-14 Nut - Nyloc M8 2
3 124-171 Screw M10 x 30 2

425-15 Nut - Nyloc M10 2
4 282691-1 Fuel Suction Hose with Adaptor 1

6 Adaptor 1
7 Fuel Return Hose 1
Spares Items
S1 - Fuel Pre Filter - Standard Power Engine

- Fuel Pre Filter - High Power Engine

VT - Parts
Common Parts - Heat Start Relay and Cables
7
4
5 6
9
2
1
95AE. 028
4
BoM 950511
1 42421-3 Stud M10 x 65 1

2 42661-1 Washer - Nylon 1
3 42660-1 Spacer - Nylon 1
410-49 Nut - Brass M10 4
5 48-271 Heat Start Relay 1

6 124-101 Screw M6 x 16 2
425-8 Nut - Nyloc M6 2
7 282034-1 Heat Start Cable - Power to Relay 1

8 - Heat Start Cable - Relay to Heat Start
See Engine Common Parts (item 14)
9 - Powapak Tub Rear Valance - See Section 22.PC

VT & VS - Parts
22.PC
Powapak Tub
Table of Contents
Section Page
Powapak Tub and Components

Powapak Tub - VT and VS Common Parts 22.PC : 2
Powapak Tub - VT Parts only 22.PC : 6
Powapak Tub - VS Parts only 22.PC : 7
3/4” Water System Feed Pipe Assembly 22.PC : 8
1” Water Pump Suction Pipe Assembly 22.PC : 9
Page Issue 07 Chapter - Powapak 22.PC:1

VT & VS - Parts
Powapak Tub
34 45
32 46
33
25 24 21 16
10 26
31
6
17 22
12
8 23
7 24
13 3
14 15
41
44
20
52 19
43 18
11 17
39 29 30 9 49
41 40 41 54 29 53 50
1 30
37 47
2
36
39
48
35 27
38
28 51
42
54
VS TANKS ONLY
56
55
CHASSIS ENGINE FUEL RETURN

57 95PT. 002-9
CHASSIS ENGINE FUEL FEED
22.PC:2 Chapter - Powapak Page Issue 07

VT & VS - Parts
Powapak Tub
BoM 950512
1 281283-1 Engine Beam - Front 1

2 281282-1 Engine Beam - Rear 1
3 281643-1 Deck Plate 1

4 281881-1 Hose Tray 1
5 124-134 Screw M8 x 16 6
6, 7 - Engine Front Cradle/Panel and Screws - See

8 282375-1 Rear Engine Cradle 1
9 124-272 Screw M16 x 45 2
10 200510-1 Front Valance 1

11 124-169 Screw M10 x 25 6
425-15 Nut - Nyloc M10 6
12 124-137 Screw M8 x 25 2
425-14 Nut - Nyloc M8 2
13 30-184 Reverse Alarm with Connector 1

14 283229-6 Spacer 1
457-2 Washer - Large M6 2
420-13 Nut - M6 1
15 287-12 Grommet 1
16 282818-1 Rear Valance 1

17 124-169 Screw M10 x 25 6
18 124-137 Screw M8 x 25 2
425-14 Nut - Nyloc M8 2
19 Flap - Valance - See elsewhere in this section

20 124-175 Screw M10 x 40 1
420-15 Nut M10 1

23 42421-3 Stud M10 x 65 1
24 410-49 Nut - Brass M10 4
44511 Washer - Plain 2
25 - Systems Locker Assembly - See Chapter 23 1

26 124-135 Screw M8 x 20 7
425-14 Nut - Nyloc M6 4
27 283801-2 190 Litre Fuel Tank - Current Type ‘B’ 1

VT & VS - Parts
Powapak Tub
28 69-27 Locking Filler Cap (Large) 1

29 124-169 Screw M10 x 25 4
425-15 Nut - Nyloc M10 4
30 124-167 Screw M10 x 20 2
31 283323-1 Fuel Level Sender (Curtis) 1

32 283432-1 Adaptor Plate - Curtis Sender 1
33 283433-1 Gasket - Adaptor Plate 1
34 124-103 Screw M6 x 20 4
433-2 Clufix M6 4
35 521-8 Adaptor Elbow 2

36 510-4 Nut - Tubing Ø8 2
511-4 Sleeve - Tubing Ø8 2
37 39024 Tubing - Nylon Ø8 0.4
38 281902-1 Walkway 1
40 211-12 Anti-slip Surface x 1240 Long 1
425-14 Nut - Nyloc M8 9
42 7684-1 Plug G1/2" 1

451-19 Washer - Sealing G1/2" 1
43 281610-1 Plate - Walkway 1

457-4 Washer - Large Flat M8 3
45 283263-1 Powapack Services Loom 1

46 24-1 Cable Tie 5
47 282812-1 Water Pump Assembly 1

48 124-137 Screw M8 x 25 4
49 281669-1,2 Water Pump 1" Feed Pipe Assembly ) See elsewhere 1

50 281670-1 Water System 3/4" Feed Pipe Assembly ) in this section 1
51 3823 Collar Plug G3/8" ) 2

VT Only
451-18 Washer - Sealing ) 2
52 288-11 Blind Gromment Ø 5/8” 4

53 288-9 Blind Gromment Ø 1/2” 4

VT & VS - Parts
Powapak Tub
VS Only
54 3162 Collar Plug G1/4" 2

55 3823 Collar Plug G3/8" ) ESU Units 2

451-18 Washer - Sealing ) only 2
56 88-28 Tap G3/8” 2

* 57 83-77 Elbow R3/8” for Ø8 Fuel Pipe 2

83-81 Elbow R3/8” for Ø10 Fuel Pipe 2
83-83 Elbow R3/8” for Ø12 Fuel Pipe 2
802776-2 Special Mercedes Adaptor G3/8” for 12mm I.D. Fuel Pipe 2
Notes
* Item 57 lists a range of fittings required for various fuel pipe sizes - Select as required.
The Fuel Pipe is that supplied with the chassis.

VT - Parts
Powapak Tub - VT Parts Only
BoM 950511
1 281475-1 Front Engine Cradle - Iveco Engines (shown) 1

282425-1 Front Engine Cradle - John Deere Engines 1
2 124-272 Screw M16 x 45 2
BoM 950512
282816-1 Valance Access Hatch comprising items 3 to 7
3 282801-1 Neoprene Flap 1

4 282804-1 Securing Plate 1
5 282802-1 Tension Plate 1
6 124-135 Bolt M8 x 20 8
425-14 Nut - Nyloc M8 8
7 283-36 Drop - Loc Bolt 1
425-14 Nut - Nyloc M8 1

VS - Parts
Fan Tub VS Parts Only
1
For all other items
2
see Common Parts
Chapter 22.CP
6
4
3
8
6
7 5
95PT. 002-2
BoM 950511
1 281695-1 Rear Panel - System Locker 1

2 124-272 Screw M16 x 45 2
BoM 950512
282816-2 Valance Access Hatch comprising items 3 to 7
3 282803-1 Neoprene Flap 1

4 282804-1 Securing Plate 1
5 282802-1 Tension Plate 1
6 124-135 Bolt M8 x 20 8
425-14 Nut - Nyloc M8 8
7 283-36 Drop - Loc Bolt 1
425-14 Nut - Nyloc M8 1
8 281922-1 Bracket - Hose Support 1

124-137 Screw M8 x 25 2
425-14 Nut - Nyloc M8 2

VT & VS - Parts
3/4” Water System Feed Pipe Assembly
5
6
DECKPLATE - SEE
POWAPAK TUB
ASSEMBLY ITEM 3
1
2
3
95WC. 007-2
2
1
BoM 950512
281670-1 3/4" System Feed Pipe Assembly
1 277-130 Hose Tail 3/4" NB x G3/4" 2

2 277-148 ‘O’ Ring 2
3 277-133 Equal Tee 1
4 281668-1 PVC Pipe 1
5 277-164 Backnut G3/4" 2
6 277-160 Gasket 1
7 277-158 Hose Tail Flat Seat G3/4" 1
8 277-159 Flynut G3/4" 1
Notes
Use Loctite 5331 to seal thread marked †.

Do not use PTFE (Teflon) based tape to seal other threads.
To avoid breakage do not over tighten screwed fitting.

VT & VS - Parts
1” Water Pump Suction Pipe Assembly
BoM 950512
283793-2 1" Pump Suction Pipe Assembly
1 281667-1 Pipe - Water 1” 1

2 277-129 Elbow 1” BSP x 90° 1
3 277-149 ‘O’ Ring 1
4 277-125 Hosetail 1” BSP / 1” NB Hose 1
5 277-165 Backnut 1” 2
6 277-163 Gasket 1
7 277-161 Hosetail 1” BSP 1
8 277-162 Flynut 1” BSP 1
Notes
Use Loctite 5331 to seal thread marked †.

To avoid breakage do not over tighten screwed fitting.

VT & VS - Parts

VT & VS - Parts
22.PD
VT and VS Fan Impellers and Fan Case
Table of Contents
Section Page
VT and VS Suction System

Fan Impeller Installation 22.PD : 2
Fan Case 22.PD : 4
Fan Case Outlet Flap 22.PD : 6
Page Issue 07 Chapter - Powapak 22.PD:1

VT - Parts
VT Fan Impeller Installation
3
4
5
2
95FI. 005
BoM 950513
> 1 280730-1 Fan Impeller x Ø760 - Iveco & JD Std. Power Engines 1
280830-1 Fan Impeller x Ø800 - Iveco & JD High Power Engins 1
2 62025-1 Spinner - Gearbox 1
3 42284-1 Mask - Fan Case 1

4 837-37 Screw - Special M8 x 20 4
5 - Impeller Retention - See Gearbox in section 22.PE
6 - Fan Case and Fittings - See over next page
22. PD:2 Chapter - Powapak Page Issue 08

VS - Parts
VS Fan Impeller Installation
3
4
95FI. 005-2
BoM 950513
1 280830-2 Fan Impeller x Ø800 1

2 78401-1 Spacer 1
3 78404-1 Washer 1
4 124-205 Screw M12 x 35 1
460-12 Washer- Spring 1
5 - Fan Case and Fittings - See next page
Page Issue 07 Chapter - Powapak 22. PD:3

VT & VS - Parts
Fan Case
18
19
17
2 2 16
6
17
12 14
13 15
12
1
6
1
7
18 11 10 9 12
3
5
4
8
THE DISTANCE BETWEEN THE

TRANSITION RING (8) AND
FAN (18) SHOULD BE 4mm.
ENSURE THE GAP IS EQUAL
8 ALL ROUND THE RING USING
ADJUSTER NUTS (12).
7
18
95FI. 001-3
VT
GEARBOX
SHOWN

VT & VS - Parts
Fan Case
BoM 950513
1 282390-1 Fan Case 1

2 124-169 Screw M10 x 25 4
425-15 Nut - Nyloc M10 4
3 42239-2 Flange 1
4 42382-1 Diaphragm 1
5 124-137 Screw M8 x 25 12
425-14 Nut - Nyloc M8 12
6 93875-1 Fan Case Cover 1

7 124-135 Screw M8 x 20 10
457-4 Washer - Extra Large M8 10
8 42401-1 Transition Ring 1

9 285-2 Spring - Compression 3
10 62770-1 Sleeve 3
11 457-5 Washer 3
12 425-15 Nut - Nyloc M10 3
13 42587-1 Cover Plate 1

124-134 Screw M8 x 16 1
14 42238-1 Access Cover 1

15 124-134 Screw M8 x 16 5
16 62407-1 Grab Handle 1

17 124-135 Screw M8 x 20 4
426-4 Nut M8 2
18 - Suction Fan Impeller - See over previous page 1
19 - Safety Flap Assembly - See next page 1
Page Issue 07 Chapter - Powapak 22. PD:5

VT & VS - Parts
Fan Case Oulet Flap
Safety Precautions
Ensure the outlet flap is correctly set - see below.
7 8 9 19
18 17 20
23
21
22
16
2
3
4
6
15 14
5
10
13 1
LUBRICATION
HOLE 11,12
2-3mm
95FI. 002
Setting Procedures
There should be 2-3mm of free play between the flap (1) and the angle stop inside the fan outlet, as
shown, when the flap actuator (7) is fully depressed against the fan case seal face. Adjustment is made
by releasing the yoke end locknut (13) and rotating the actuation rod (14) to move the yoke end up or down
the rod as required. Having achieved the correct setting, retighten the locknut.
22.PD:6 Chapter - Powapak Page Issue 07

VT & VS - Parts
Fan Case Outlet Flap
282383-1 Safety Flap Assembly comprising:
1 42582-1 Safety Flap 1

2 42729-1 Rod - Pivot 1
3 29128-1 Bush 2
4 42728-1 Spacer 2
5 42723-1 Tab - Washer 2
6 124-134 Screw M8 x 16 4
7 42947-1 Flap - Actuator 1

8 42993-1 Actuator Rod 1
9 42992-1 U-Bolt 2
420-13 Nut M6 4
10 42952-1 Actuator Flap 1

11 289-4 Yoke End 1
12 289-21 Pin - Spring 1
13 420-15 Locknut M10 1
14 42990-5 Actuation Rod 1
15 42986-1 Sleeve 1
16 42988-1 Clevis 1
17 29145-2 Pin - Clevis 1
18 39624 Spring Retaining Clip 1
19 80766-1 Tension Spring 1

20 123-108 Bolt M8 x 40 1
22 425-14 Nut - Nyloc M8 1
23 42586-1 Spacer 1
Notes
Page Issue 07 Chapter - Powapak 22.PD:7

VT & VS - Parts

VT - Parts
22.PE
VT Transmission
Table of Contents
Section Page
VT Transmission
Fluid Coupling 22.PE : 2
Fan Drive Gearbox 22.PE : 4
Page Issue 07 Chapter - Powapak 22. PE:1

VT - Parts
Fluid Coupling
1
21
5 2
24
3
17
6
4
22
23
2
10
6
1
20
19
18
3
9
14
7
15
11 16
12
13
17
95FC. 001-5
8 4
22.PE:2 Chapter - Powapak Page Issue 07

VT - Parts
Fluid Coupling
1 - Flywheel - See relevant Dressed Engine Section
2 123-131 Bolt M10 x 55 6

3 14-7 Bearing 1
4 129-127 Cap Head Screw M8 x 30 20
5 - Gearbox - See next page 1
6 295150-1 Fluid Coupling - Iveco 1

295151-1 Fluid Coupling - John Deere 1
7 77-39 Rotary Seal 1
8 656-1 ‘O’ Ring 1
9 656-2 ‘O’ Ring 1

10 656-3 Fusible Plug 1
11 656-4 Circlip - External 2
13 656-6 Circlip - Internal 1
14 656-7 Bearing 1
15 656-8 Oil Seal 1
16 656-9 Gasket 1
17 656-10 Impeller Inner 1
18 656-12 Centre Hub 1
19 656-13 Bearing Carrier 1
20 656-14 Screw 12
42501-500 Overhaul Kit Comprising Items:-

3, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
21 42299-1 Safety Cover 2

22 920000-32 Spacer - Plain 6
23 123-134 Bolt M10 x 70 6
24 63641-1 Adaptor Ring - John Deere engines only 1
Notes
On assembly, coat internal spline of Item 18 with Kluber Paste 46MR410, JSL Part No. 94-24
Page Issue 07 Chapter - Powapak 22. PE:3

VT - Parts
Fan Drive Gearbox
41
40
41 39
38
37
24 36 35
17 8
9 25
4 29 10
6
15 20
11
5
13
16
3
12 17
34
23
28 24
30 14 31 18 7 27 19
95FG. 001-3 2 21,22 25,26 32 33

VT - Parts
Fan Drive Gearbox
42270-1 Gearbox comprising items 2 to 34:-: 1
2 42271-2 Casing - Gearbox 1

3 42272-2 Housing - Bearing 1
4 42466-1 Shaft - Input 1
5 42274-19 Shaft - Output 1
6 42275-34 Gear 1
7 42255-1 Cap - Bearing 1
8 42277-1 Plate - Cover 1
9 42278-1 Spacer 1
10 42279-1 Gasket 1
11 42280-1 Washer 1
12 42281-1 Spacer 1
13 42283-1 Spacer 1
14 10-21 Bearing 1
15 10-22 Bearing 1
16 14-46 Bearing 1
17 77-21 Seal - Rotary 2

18 80-95 Seal - ‘O’ Ring 1
19 80-100 Seal - ‘O’ Ring 1
20 54-4 Plug - Collar 3
21 13109 Plug - Magnetic 1
22 451-126 Washer - Copper 1

23 121-41 Screw M10F x 25 3
24 124-137 Screw M8 x 25 10
25 460-10 Washer - Spring M8 16
26 124-143 Screw M8 x 40 6
27 457-4 Washer - Extra Large M8 2

28 42659-1 Tab Washer 1
29 16978-1 Breather 1
30 87-7 Oil Level Indicator 1
31 42282-2 Clamp Plate 1
283803-1 Fixing Kit comprising items 32 - 34:-

32 42282-3 Clamp Plate 1
33 42659-1 Tab Washer 1
34 121-43 Screw M10F x 30 3
35 HC08001-48 Hose 1/2” 1

36 263-4 Adaptor G 1/2” 1
37 265-4 Adaptor G3/8” x 1/2” 1
451-18 Washer - Sealing G 3/8” 1
Page Issue 07 Chapter - Powapak 22.PE:5

VT - Parts
Fan Drive Gearbox
38 40525-1 Drain - Gearbox 1

39 124-167 Screw M10 x20 1
420-15 Nut M10 1
40 3823 Plug 3/8” BSP 1
451-18 Washer - Sealing G 3/8” 1
41 - Fluid Coupling - See elsewhere in this Section
Notes

VS - Parts
22.PF
VS HydroDrive Transmission
Table of Contents
Section Page
Gearbox and Selectors

Gearbox Assembly 22.PF : 2
Gearbox Selector Assemblies 22.PF : 6
Ancillary Equipment
Pumps and Motors 22.PF : 8
Port Fittings 22.PF : 12
Settings and Assembly Details 22.PF : 18
Remote Transmission Filter 22.PF : 19
Hydraulic Hoses
Hydrodrive Hoses 22.PF : 20
Hydrodrive Installation Hoses 22.PF : 22
Gearbox Installation
Gearbox Installation 22.PF : 24
Prop Shafts and Sensors 22.PF : 25
Page Issue 07 Chapter - Powapak 22.PF:1

VS - Parts
Mk III Gearbox Assembly
30 1,2,3 28
29 19 29
19
27
18
22 6
40 11 10 25 23 24
6
7
14 17
13 15 4 8,9
12
21
16 26 20 21 11
37
5
31 35
38
37
36
34 33 32
39
95HT. 019
22. PF:2 Chapter - Powapak Page Issue 07

VS - Parts
29800-3 Gearbox Assembly comprising:
1 29701-1 Case 1
2 280195-1 Lid ) 1
Not shown - See
3 124-134 Screw M8 x 16 ) 12
notes over page
460-10 Washer - Spring M8 ) 12
29770-1 Gear Set comprising items 4,5,6, 16,17,18, 27, 31,32.
4 29706-1 Shaft - Input 1

5 29708-1 Gear - Input 1
6 29714-1 Drive Flange 2
7 29518-1 Washer 2
8 121-45 Screw M10F x 35 6
9 29521-1 Tab Washer 2
10 14-53 Ball Bearing - Snap Ring 1

11 77-40 Combi Seal 2
12 29722-1 Housing - Input 1
13 14-37 Bearing - Angular Contact 2
14 29732-1 Spacer - Input 1

15 29512-1 Ring and Circlip 1
16 29715-1 Sliding Dog Gear 1
17 29767-1 Shaft - Output 1
18 29766-1 Output Gear 1
19 14-54 Ball Bearing 2

20 29771-1 Housing - Output, See notes over page. 1
21 124-37 Screw M8 x 25 14
22 14-55 Bearing - Angular Contact 2

23 28-36 Circlip - Internal 1
24 29772-1 Spacer Assembly - Output Bearings

Comprises Inner and Outer Spacers 1
25 27-23 Circlip 1
26 12-24 Needle Roller 17
27 29746-1 Shaft - Trans Pump/Water Pump Drive 1
28 29729-1 Adaptor Flange - Motor (Transmission) 1

29 77-42 Oil Seal 2
30 29728-1 Adaptor Flange - Pump (Fan) 1
31 29712-1 Shaft - Trans. Motor Driven 1

32 29765-1 Gear - Trans. Motor Driven 1
> 33 29765-3 Sleeve 1
34 27-13 Circlip 1
Page Issue 08 Chapter - Powapak 22. PF:3

VS - Parts
30 1,2,3 28
29 19 29
19
27
18
22 6
40 11 10 25 23 24
6
7
14 17
13 15 4 8,9
12
21
16 26 20 21 11
37
5
31 35
38
37
36
34 33 32
39
95HT. 019
22.PF:4 Chapter - Powapak Page Issue 07

VS - Parts
35 29730-1 End Cap 2

36 124-201 Screw M12 x 25 4
38 77-41 Oil Seal 1
39 29726-1 Flange - Motor Adaptor 1
40 121-81 Bolt M12f x 50 8

419-12 Nut M12f Torque Prevailing 8
Notes
Mk I and Mk II gearboxes have never been fitted to VS machines
Items 27 & 31 MUST have end float

of 0.2 - 0.25mm Adjust if necessary
by fitting shim.
Items 3:-
Shims
Setscrews 12 off,
Torque to 33 Nm 29742-1 = 0.4mm
(24 lbft). Ensure 29742-2 = 0.2mm Items 22 & 41 - Bearings
‘O’ ring is seated 29742-3 = 0.1mm MUST be assembled back
in groove before to back as shown.
Torque to 33 Nm
fitting lid.
1 28
Mk III gearboxes can be

identified by the circular
Output Bearing Housing,
item 20. Earlier Mks had
a sculpted profile.
8
Item 8 - Setscrew 6 off:-
Torque to 69 Nm (50 lbft)
Shims Item 26 - Needle rollers MUST have

29742-1 end float of 0.2 - 0.25mm. Adjust, if
29742-2 necessary, by shiming housing (20)
29742-3 /Case (1) interface.
12 20
1
Shims
29741-1 = 0.4mm
Apply Sealant to housing (12,30,35,39)/ 29741-2 = 0.2mm
Case (1) interfaces NB. Input shaft end 29741-3 = 0.1mm
float to be 0.05mm 1
95HT. 023

VS - Parts
Gear Selector Assemblies
2 3 4 21 22 5 1 16
20 19
10 9 7 8 7 6
17
18
11 14 13 12 15
78mm
INPUT SELECTOR (PUMP DRIVE)
19 2 3 4 21 22 5 1 16
20
10 9 7 8 7 6
17
18
11 14 13 12 15
97mm
OUTPUT SELECTOR (MOTOR DRIVE)
HT. 0007-2

VS - Parts
Gear Selector Assemblies

Input Output Per Cylinder
Selector Selector
1 29731-2 29731-1 Rod Air-shift 1

2 29523-1 29751-1 Yoke 1
3 29527-1 < Bolt Retaining M10F 1
4 135-23 < Grubscrew M6 1
5 29747-1 29748-1 Guide Sensor 1
6 29528-1 29763-1 Head 1

7 80-33 < ‘O’ Ring 2/1
8 29531-2 29764-1 Barrel 1
9 29529-1 29761-1 Gland 1
10 663-71 < ‘O’ Ring 1
11 80-55 < ‘O’ Ring 1

12 124-171 < Setscrew M10 x 30 1
455-11 < Plain - Washer M10 1
13 28868-12 28868-15 Piston Seal 1
14 29533-1 < Stroke Limiter 1
15 126-121 Setscrew M6 x 90 3
124-123 Setscrew M6 x 100 3
460-8 < Washer - Spring M6
16 537-3 < Adaptor 6 x 1/8” BSP 1
17 552-3 < Adaptor Elbow 6 x 1/8” BSP 1
18 221-2 < End Cap 1
19 280195-1 Lid Cover 1

20 40-82 ‘O’ Ring 1
21 282054-1 < Switch Sensor 1
22 29756-1 < Sensor Spacer 1
23 N/A 80-265 ‘O’ Ring 2

24 N/A 29762-1 Sleeve 1
25 N/A 129-93 Bolt M6 x 16 Cap. Hd. 3
† Apply Loctite 275 to Item 3 Retaining Screw and torque to 58 Nm (43 Lbft)
Ø Apply Thread Sealant Loctite 542
Notes

VS - Parts
Pumps & Motors
52 51
50
53
47 48 49 36,39 3,7 9 2
35 10a 46
45
54
*2 *4 *5
*3
11
1 (A) (B)
25 26 12 10b
*5 *3
*6
55
X
X = Motor Identification 27,30
374mm = 160cc Motor * Pump and motor identification numbers, 2 to 6, in balloons
333mm = 110cc Motor correspond with those used elsewhere in this chapter, ie:-
2. Fan Drive Pump 4. Transmission Pump
3. Options Pump 5. Sweepgear pump
1 6. Transmission Motor
6
*4
5
4
3
NOTE HOLE POSITION
ON ASSEMBLY TO BE
7 L
“ON” AND “ABOVE” C
7 30
3
37 27
28
38 35 25
*2 *6 29
MOUNTING FLANGES AND HARDWARE 95HT. 024

VS - Parts
Pumps & Motors
BoM 950412
1 97161-1 Transmission Pump - 55 series (CCW) 1

97161-2 Forward/Reverse Servo Valve + EDC (Service Item)
97161-3 EDC (Solenoid + ‘Mil’ Plug Service Items)
2 224-15 Filter Element - (Service item)
3 29729-1 Adaptor Flange 1
4 29569-1 Stud - Shanked M12 x 65 4
5 45014-8 Spacer Ø13 x 8 4
6 460-12 Washer - Spring 4
420-16 Nut M12 4
7 129-183 Cap Hd. Setscrew M12 x 25 4
8 -
9 79-99 ‘O’ Ring 1
BoM 950413
10a 239-7 Pump - Sweepgear (14cc/rev CCW Rotation) 1

10b 239-33 Tandem Pump - (A) Sweepgear, (B) Options (CCW Rotation)
(Used when there is insufficient room to fit item (45) 2 x 14cc/rev)
11 103-39 Bolt 3/8” UNC x 1 1/4” 2
12 79-97 'O' Ring - (Spares Item) 1
13 - 24 -
BoM 950412
25 29752-1 160cc Trans. Motor (HSR2) (CW Rotation) X = 374mm 1*

29753-1 110cc Trans. Motor (HSR2) (CW Rotation) X = 333mm 1*
26 80-109 'O' Ring - (Spares item) 1
28 29758-1 Stud - Shanked M20 x 85 4
420-20 Nut M20 2
31 -
BoM 950412
35 29749-1 Pump - Fan Drive (CW Rotation) 1

37 29557-1 Stud - Shanked M12 x 80 2
420-16 Nut M12 2

VS - Parts
Pumps & Motors
52 51
50
53
47 48 49 36,39 3,7 9 2
35 10a 46
45
54
*2 *4 *5
*3
11
1 (A) (B)
25 26 12 10b
*5 *3
*6
55
X
X = Motor Identification 27,30
374mm = 160cc Motor * Pump and motor identification numbers, 2 to 6, in balloons
333mm = 110cc Motor correspond with those used elsewhere in this chapter, ie:-
2. Fan Drive Pump 4. Transmission Pump
3. Options Pump 5. Sweepgear pump
1 6. Transmission Motor
6
*4
5
4
3
NOTE HOLE POSITION
ON ASSEMBLY TO BE
7 L
“ON” AND “ABOVE” C
7 30
3
37 27
28
38 35 25
*2 *6 29
MOUNTING FLANGES AND HARDWARE 95HT. 024

VS - Parts
Pumps & Motors
BoM 950411
45 239-11 Pump - Options (14.4cc/rev CW Rotation) 1

46 - Blanking Plate - Supplied with Item 35
129-154 Cap Hd. Screw M10 x 25 2
47 103-39 Bolt 3/8”UNC x 1 1/4” 2
48 80-94 ‘O’ Ring (Service item) ] Spares

49 294-22 Drive Adaptor - 9 x 23 Spline ] Items
50 527-3 Tee 2
51 124-112 Setscrew M6 x 45 1
425-13 Nut M6 Nyloc 1
52 29559-1 Bracket - Mounting 1
53 273-20 Tubing Ø6mm Blue 0.6m
4104-1 Sleeve
510-3 Nut 4
511-3 Olive 4
54 - Input selector assembly ] See Gear Selector

55 - Output selector assembly ] Assemblies
Notes

VS - Parts
Port Fittings - Underside & Rear Views
T
B (TOP) L1 M3
A
6 B
M2
3
2 M5
XA
RP M1 XB
(T3)
T S
(BOTTOM) FRONT VIEW
T T
(TOP) B L1 L2 (TOP)
1
2 4
A
JOHNSTON
3 5
OR
S 5 3
HYDRODRIVE
6 G7
L1 G1 G6
HT. 0011-2
TOP VIEW

VS - Parts
Port Fittings - Underside & Rear Views
T
(TOP)
JOHNSTON
5
4 M3 M6
(T4)
OIL LEVEL
SIGHT GLASS G3 G4 T
(BOTTOM)
REAR VIEW
L2 (T5)
6
1 5 3
OR
3 5
L1
2 4 B
X1
T S G5 T
(BOTTOM) HT. 0013-2 (BOTTOM)
UNDERSIDE VIEW

VS - Parts
Port Fittings
BoM 950412 Transmission Motor (Item 6)
Port Part No. Description
A&B 498-N09 1" H.P. Flange Kit - Comprising:-

40-74 'O' Ring Seal )Spares Item 1 off
N.S.S. Flange Half 2 off
103-58 Bolt - Cap Head 7/16" UNC x 1 3/4" 4 off
450-30 Washer - Spring 4 off
Tow Valve Option
A & B 29757-1 Adaptor Block
151-100 Bolt 7/16" UNC x 3"
40-74 ‘O’ Ring ) Spares Item
263-4 Adaptor - 1/2" BSP
L1 499-4 Adaptor 1 1/16" UNF x 3/4" BSP for 110cc Motor

(Top) 499-15 Adaptor 1 5/18" UNF x 3/4" BSP for 160cc Motor
79-18 'O' Ring Seal for 110cc Motor ) Spares
80-? 'O' Ring Seal for 160cc Motor ) Items
L2 90671-1 Test Point Adaptor 1 1/16" UNF for 110cc motor

(Bottom) 66086-1 Test Point Adaptor 1 5/16" UNF for 160cc motor
79-18 'O' Ring Seal for 110cc Motor ) Spares
80-54 'O' Ring Seal for 160cc Motor ) Items
665-17 Test Point Valve
79-48 'O' Ring Seal ) Spares Items
M1 665-17 Test Point Valve

(Forward) 79-48 'O' Ring Seal ) Spares Item
M2 29671-1 Adaptor 9/16" UNF x 1/4" BSP

(Reverse) 79-48 'O' Ring Seal )Spares Item
28753-5 Orifice
M3, M5 499-2 Adaptor 9/16" UNF x 1/4" BSP

XA 79-48 ‘O’ Ring ) Spares Item
XB 79-48 ‘O’ Ring ) Spares Item

499-2 Adaptor 9/16" UNF x 1/4" BSP
255-11 Swivel Tee
457-17 Washer - Sealing 2 Off
2565-6 Adaptor G 1/4"
665-18 Test point G 1/4"

VS - Parts
Port Fittings
BoM 950412
Transmission Pump (Item 4)
A 498-N09 1" H.P. Flange Kit - Comprising:

40-74 'O' Ring Seal 1 off
N.S.S. Flange Half ) Spares 2 off
103-58 Bolt 3/8" UNC x 1 1/2" ) Items 4 off
450-30 Washer - Spring) 4 off
B 498-N09 1" H.P. Flange Kit - Comprising:-

N.S.S. Flange Half ) Spares 2 off
103-58 Bolt 7/16" UNC x 1 3/4” ) Items 4 off
450-30 Washer - Spring) 4 off
X1 499-2 Adaptor 9/16" UNF x G 1/4"

79-13 'O' Ring Seal ) Spares Item
L1 499-4 Adaptor 1 1/16" UNF x G 3/4, includes:-

L2 499-4 Adaptor 1 5/16" UNF x G 3/4", includes:-

M3 499-2 Adaptor 9/16" UNF x G 1/4"

255-11 Swivel Tee
S 499-5 Adaptor 1 5/16" UNF x G 1", includes:-

M6 665-17 Test Point Valve


VS - Parts
Port Fittings
BoM 950412
Fan Drive Pump (Item 2)
B 498-N03 1" L.P. Flange Kit - Comprising:-

N.S.S. Flange Half Spares 2 off
103-41 Bolt 3/8" UNC x 1 1/2" Items 4 off
S 802853-1 Adaptor Block

79-85 'O' Ring Seal
151-115 Cap Hd. Screw 1/2" UNC x 1 1/2"
> 450-31 Washer - Spring
263-8 Adaptor 1 1/4" BSP
451-111 Washing - Sealing
L 499-12 Adaptor 7/8" UNF x G 1/2", includes:-

RP 499-1 Adaptor 7/16" UNF x G 1/4", includes:-

BoM 950413 and 950414

Sweep Gear Pump (Item 5)
T 262-7 Elbow 1” BSP )

Inlet 79-34 'O' Ring Seal ) Spares
(Top) 129-123 Cap Hd. Screw M8c x 20mm ) Items
460-10 Washer - Spring M8 )
265-10 Adaptor 3/4" x 1" BSP
451-22 Washer - Sealing 1" BSP
T 262-4 Elbow 1/2" BSP )

Outlet 79-34 'O' Ring Seal ) Spares
(Bottom) 129-123 Cap Hd. Screw M8c x 20mm ) Items
460-10 Washer - Spring M8 )
263-4 Adaptor 1/2" BSP
451-19 Washer - Sealing 1/2" BSP

VS - Parts
Port Fittings
BoM950413
Options Pump (Item 3)
T 247-1 Elbow 1/2" BSP

Outlet 79-34 'O' Ring Seal )
(Top) 51-55 Cap Hd. Screw ) Spares
5/16" UNC x 2 1/4" ) Items
450-28 Washer - Spring )
T 247-2 Elbow 3/4" BSP )

Inlet 79-34 'O' Ring Seal ) Spares
(Bottom) 151-55 Cap Hd. Screw ) Items
5/16" UNC x 2 1/4" )
450-28 Washer - Spring
BoM 950411
Gearbox (Item 1)
G1 13538 i) Breather
41963-1 ii) Adaptor
451-18 Washer - Sealing
G2 7684 Collar Plug 1/2” BSP

G4 5259 Plug 1/8" BSPT - Socket Hd.
G3, G5 54-50 Magnetic Plug 1/4" BSP

451-124 Washer - Copper
G6 18892 Plug 3/8" BSPT - Socket Hd.
G7 87-25 Oil Level Gauge

VS - Parts
Settings and Assembly Details
2. FANDRIVE PUMP:- 4. TRANSMISSION PUMP:-

c) ‘’Standby’’ differential pressure setting Charge Pump pre-set to 24 Bar
d) Main relief valve maximum pressure setting a) Forward drive relief setting 420 Bar
e) Set displacement limiter dimension to 30mm b) Reverse drive relief setting 350 Bar
(e)
DISPLACEMENT
LIMITER
30 (b)
(a)
2 (d) (c)
4
2 4
JOHNSTON
HYDRODRIVE
JOHNSTON
6
6
) Apply ‘Molykote’ grease Pt. No. 94-6 to all drive shaft

splines on assemblyl
TRANSMISSION MOTOR
Test assembly for leaks
Test ‘free movement’ of sliding gears at 1.0 bar maximum air pressure
Test switches for on/off operation/engagement 95HC. 022

VS - Parts
Remote Transmission Filter
8
8
3
7 7
4
5
2
4
6
9 95HT. 025-2
810094-1 Remote Filter Installation comprising:
1 800661-1 Filter Bracket 1

2 97840-1 Adaptor Block 1
3 123-90 Bolt M6 x 60 2
425-13 Nut - Nyloc M6 2
4 499-12 Adaptor 2
5 283926-1 Oil FilterAssembly -
6 97841-1 Filter Remote Block (Replaces Filter on Pump) 1
7 499-12 Adaptor 2
8 HC08002-115 Hydraulic Hose 2
9 - Transmission Pump -
Notes

VS - Parts
Hydrodrive Hydraulic Hoses
221 RETURN
224
218 T4
B X L1
M3
L2
2 4
A
JOHNSTON
S
HYDRODRIVE
FEED FROM
223 BOOST
M5
A
CANISTER
L1
6
B
XB
T2 222
SEE UNDERSIDE
220 VIEW BELOW
219
TOP VIEW
219
220
XB
B
TOW L1
VAL
ALVE
VE 6
OPTION A (TOP)
(TOP)
1
218
3 5
2 4 L1
B
X1 M4
OR
SEE T
TOP
OP 5 3
VIEW ABOVE
222
UNDERSIDE VIEW 95HT.. 022

95HT
1 Gearbox 4 Transmission Pump
2 Fan Drive Pump 5 Sweepgear Pump
3 Options Pump 6 Transmission Motor

VS - Parts
Hydrodrive Hydraulic Hoses
BoM 950414
2 - Fan Drive Pump

3 - Options Pump
4 - Transmission Pump
5 - Sweepgear Pump
6 - Transmission Motor
218 HB16148-117-275 1" Hydraulic Hose

219 HB16148-200-275 1" Hydraulic Hose
220 HF04002-140 1/4" Hydraulic Hose
221 HF04002-150 1/4" Hydraulic Hose
222 HE12063-113-310 3/4" Hydraulic Hose
*223 HE16023-170-190 1/4" Hydraulic Hose
*224 HE12002-151 1/4" Hydraulic Hose
Notes
Hose item numbers correspond with those in diagram SH525z01 in Chapter 8 of the Maintenance
Section.
*Hoses 223 and 224 see Hydrodrive Transmission Installation diagram over the page.

VS - Parts
Hydrodrive Installation
7 8 201
200
10
217
215 202
216
P 9
02
P X
230 224
232
226 209 233
226 225
229 01
223 227 30
227
225 228 231
231
228
226
M2
6
M3
227
XA
231
101
228 230
L
223
B 3
01 224 OUT
L2
2
S IN
RP
4 1 S 233
5 IN
232
M3 229
OUT
225
02
95HH. 004
Key - Components with Circuit Diagram references - See Maintenance Section Chapter 8
1. Gear Box 6. Transmission Motor - SH525z01

2. Fan Drive Pump - SH524z01 7. Antiskid Module - SH525z01
3. Options Pump - SH528a02 8. Sweepgear Valve Block - SH523z01
4. Transmission Pump - SH525z01 9. Fan Drive Valve Block - SH524z01
5. Sweepgear Pump - SH531b01 10. Hydraulic Oil Reservoir - SH521b01

VS - Parts
Hydrodrive Installation - Hydraulic Hoses
BoM 950414
Item No. Part No. Description Diagram
01 HE16003-300 1” Hydraulic Hose Hose shown on SH531b01
02 - See Emergency Discharge

Pump - Chapter 28
BoM 950714
30 - See Emergency Discharge

Pump - Chapter 28
BoM 950514
101 - See Options Pump Valve Block

Chapter 28
200 -
201 -
202 - See Fan Tub Hydraulic Hoses
209 - Section 22.PG
215 -
216 -
217 -
BoM 950414
223 HE16023-170-190 1” Hydraulic Hose

224 HE12002-151 3/4” Hydraulic Hose
225 HFO4003-104 1/4” Hydraulic Hose These hoses are shown
226 HFO4003-114 1/4” Hydraulic Hose on SH525z01
227 HFO4003-114 1/4” Hydraulic Hose
229 HE20001-214 1 1/4” Hydraulic Hose

230 HF12307-100 3/4” Hydraulic Hose These hoses are shown
231 HCO8002-118 1/2” Hydraulic Hose on SH525z01
233 HE16001-75 1” Hydraulic Hose
Notes
See Maintenance Section Chapter 8 for Hydraulic Diagrams.

VS - Parts
Gearbox installation
Installation Cradle Pt.No. 802085-1 A

Available
vailable on Request
JOHNSTON
95HT.. 021
95HT
‘A’’
‘A ‘B’’
‘B
A - Some chassis have below bracket mounting

B - Some chassis have above bracket mounting
Chassis Installation Drawing
Mercedes 13/5 807520

AF LF-55-220 & 180 806622
MAN 15 808226
Renault 12 807979

VS - Parts
Prop Shafts & Sensors
HYDRODRIVE
GEARBOX
CHASSIS
FRONT
(1) (2)
‘A’’
‘A ‘B’’
‘B
95HT.. 020
95HT
124-109 Setscrew M12 x 50 8 of

offf
426-6 Nut M12 Philidas 8 of
offf
Torque to 1
117
17 Nm (86 lbf)
Chassis A & B Propshaft Drawing Ref.
Mercedes 13/5 807383

DAF LF-55-220 & 180 806884
MAN 15 808225
Renault 12 807907
Sensors
Item No Part No. Description
1 280856-1 Engine Speed Sensor Assembly

282810-1 Mounting Bracket
2 280856-1 Road Speed Sensor Assembly
282424-1 Mounting Bracket

VS - Parts

VS - Parts
22.PG
VS Hydrostatic Components
Table of Contents
Section Page
Oil Cooler Assembly

Oil Cooler and Fan Installation 22.PG : 2
Suction System
Fan Drive Mount Assembly 22.PG : 4
Fan Drive Motor Installation 22.PG: 6
Fan Drive Block 22.PG : 8
Hydraulic Hoses
Fan Tub Hoses 22.PG : 10
Controls
Antiskid Module 22.PG : 12
HydroDrive Selector Valve and HWE Switch 22.PG : 13
Management Box 22.PG : 14
Page Issue 07 Chapter - Powapak 22.PG:1

VS - Parts
Oil Cooler and Fan Installation
6 5
9
8
‘A’’
‘A 10
5 6 13 14 3
1
5
4 13
14
16
15 7
18
17
5 12 11
95HC. 023
VIEW ON ARROW ‘A
‘A’’
22.PG:2 Chapter - Powapak Page Issue 07

VS - Parts
Oil Cooler and Fan Installation
Bom 950511
1 66075-1 Oil Cooler Shroud 1

2 124-167 Screw M10 x 20 2
3 124-167 Screw M10 x 20 2
425-15 Nut - Nyloc M10 2
4 90536-1 Oil Cooler 1

5 265-11 Adaptor 1 1/4” BSP x 1”BSP 2
451-111 Washer - Sealing 1 1/4” BSP 2
6 54-3 Plug - With Integral Seal 2
* 7 295046-1 Oil Cooler Motor 1

8 90549-1 Adaptor - Special 2
9 79-34 ‘O’ Ring 2
10 151-50 Capscrew 5/16” UNC x 3/4” 8
450-28 Washer - Spring 5/16” 8
11 263-2 Adaptor 1/4” BSP 1
12 124-141 Screw M8 x 35 4
13 90532-1 Motor Mount and Shroud 1

14 124-137 Screw M8 X 25 6
425-14 Nut - Nyloc M8 6
15 283925-1 Boss - Fan Drive 1

16 - Nut ) Supplied 1
- Tab Washer ) with motor 1

18 124-103 Screw M6 x 20 4
Notes
* Previous Oil Cooler Motor 70540-1 no longer available

VS - Parts
Fan Drive Mount Assembly
CURRENT TYPE ‘B’ 13 12 10 SUPERSEDED TYPE ‘A’

TOP MOUNT ASSEMBLY 7 9 TOP MOUNT ASSEMBLY
ITEMS 7 TO 14 SEE NOTES
14
8
9
NOTE
12 ORIENTATION
OF ITEM 3
11
16
18
15
17
5 1
3
6 19
2 4
20 95FI. 004-3

VS - Parts
Fan Drive Mount Assembly
BoM 950513, Drg: 282415-1
1 282405-1 Fan Drive Frame 1

2 282407-1 Adaptor Plate 1
> 3 290-29 Anti-vibration Mount 2

4 282885-1 Rebound Washer 2
5 124-139 Screw M8 x 30 4
420-14 Nut - M8 4
6 123-131 Bolt M10 x 55 2
425-15 Nut - Nyloc M10 2
7 284018-1 Top Mount Plate 1

8 124-135 Screw M8 x 20 4
9 290-45 Anti-vibration Mount 1

10 124-141 Screw M8 x 35 2
425-14 Nut - Nyloc M8 2
11 123-156 Bolt M12 x 90 1
12 284026-1 Rebound Washer 2
13 457-6 Washer - Large M12 1
425-16 Nut - Nyloc - M12 1
14 284011-1 Mount Spacer 1
15 66049-1 Spacer - Tapered 2

16 66048-1 Spacer - Parellel 2
17 66071-1 Stud M12 x 215 4
18 420-16 Nut M12 4
19 - Fancase - See Section 22.PD

20 - Rear Cradle - See Section 22.PC
Notes
When upgrading machines with the superseded type ‘A’ top mount to the current
type ‘B’ arrangement see Technical Bulletin TB 1406.

VS - Parts
Fan Drive Motor Installation
6
4 8
7
1
2
3
10
9
11 13 12
1.02 - 2.03 mm
The gap between sensor, item 11 and the

impeller bolt should be between 1.02 and
2.03 mm, as shown. A selection of shims,
in addition to that shown in item 12, are
available to achieve this setting. These are:-
282547-1 = 1.0mm thick

282547-2 = 2.0mm thick
282547-5 = 5.0mm thick 95FI. 005-3

VS - Parts
Fan Drive Motor Installation
BoM 950513
1 78184-1 Fan Motor 1

2 124-269 Screw M16 x 35 2
3 90949-1 Adaptor - Vent Line 1
4 29667-1 Adaptor 2
79-32 ‘O’ Ring 1
5 263-2 Adaptor 1/4” BSP 1
* 6 498-N08 Flange Kit - See notes below 2
7 66104-1 Adaptor 3/8” x M14 1

8 66072-2 Motor Mount 1

9 66073-1 Mask 1
10 124-103 Screw M6 x 20 6
425-13 Nut - Nyloc M6 6
11 280856 Speed Sensor 1

12 282547-10 Shim x 10 Thick 1
13 124-109 Bolt M6 x 35 1
Notes
* Bolts and washers supplied with Flange Kits item 6 must be replaced with the following:-
123-131 Bolt M10 x 55 - Port ‘A’ (with adaptor item 4) 4 off

123-128 Bolt M10 x 40 - Port ‘B’ 4 off

VS - Parts
Fan Drive Block
4
TOP
13
RV
V G2
2 3
G1
8 G2
M CV G1
5 1
11 3
RV
12
X1 8
R1 T
P1
10 (T8)
R
X
P 14
6
7
95HC. 024-4

VS - Parts
Fan Drive Block
BoM 950511
283647-12 Valve Block Assembly - 12v ) Comprising

283647-24 Valve Block Assembly - 24v ) items 1 to 6
1 847-65 Valve Cartridge NO 1

2 847-45 Valve Cartridge NC 1
3 847-3 Coil - 12v 2
847-68 Coil - 24v 2
4 847-78 Relief Valve Cartridge 1
5 847-11 Check Valve Cartridge 1
6 847-67 Orifice 1
> 7 281712-1 Extension Pipe 1/4” BSP 1

451-17 Washer - Sealing 1/4" BSP 1
8 263-6 Adaptor 3/4" BSP 2
9 281649-1 Extention Pipe 3/4" BSP 1

10 665-6 Test Point Valve 1
11 124-132 Setscrew M8c x 12mm 3
12 5104 Collar Plug 1/8" BSP 2

13 265-2 Adaptor 3/8" x 1/4" BSP 1
> 14 6587-1 Adaptor 3/4" BSP 1

> 451-21 Washer - Sealing 3/4" BSP 1
‘O’ Ring Seal Kit for items 2 - 5
Notes

VS - Parts
Fan Tub - Hydraulic Hoses
MAIN
VALVE 213
BLOCK
211
SYSTEMS
LOCKER
'F'
FLOOR
'R'
207
69
212
‘B’
‘T’
*40
‘A’
*83
TO *86 TO
LH. CB. CB. SPEED
*39 CONTROL
TO *88
RH. CB.
*73
TO
WSB
RV 214
FAN DRIVE BLOCK
V (SEE PREVIOUS
M PAGE)
T
213 R
210 212
211
217
215
216
207
212
69 211
213
235 200
210
203 201
208
209
05
204
202
205
05
208 95HH. 005-6

VS - Parts
Fan Tub - Hydraulic Hoses
BoM 950514
Item No. Part No. Description Diagram
200 HE20000-108 1/4” Hydraulic Hose

202 HE12001-68 3/4” Hydraulic Hose These hoses are
203 HE16003-90 1” Hydraulic Hose shown on SH521b01
208 HCO4002-180 1/4” Hydraulic Hose

69 HCO8003-40 1/2” Hydraulic Hose These hoses are
205 HCO4003-85 1/4” Hydraulic Hose shown on SH522/523z01

210 HE12003-42 3/4” Hydraulic Hose These hoses are
211 HF12011-101 3/4” Hydraulic Hose shown on SH524z01
212 HF12052-102-270 3/4” Hydraulic Hose
215 HFO4002-41 1/4” Hydraulic Hose These hoses are

216 HFO4000-34 1/4” Hydraulic Hose shown on SH525z01
Notes
See Maintenance Section Chapter 8 for Hydraulic Diagrams.
*For hoses 39 and 73 see Chapter 26, WSB Installation - Hydraulic Hoses.
*For hoses 40, 83, 86 and 88 see Chapter 24, CB Installation - Hydraulic Hoses.

VS - Parts
Antiskid Module
2 1
‘A’
S
TP2
CT2
SW
(T6)
TP1
5
(T1)
RL
3
‘B’
4
5
‘A’
CT4
T R
RL
P
‘B’ 4
95HC. 025
BoM 950511
1 66110-1 Antiskid Manifold Assembly 24v 1

66110-2 Antiskid Manifold Assembly 12v 1
2 70849-1 Brake Light Switch 1

3 665-17 Test Point Valve 9/19” UNF 2
4 263-2 Adaptor 1/4” BSP 3

5 124-148 Screw M8 x 65 2
425-14 Nut - Nyloc M8 2

VS - Parts
Hydrodrive Selector Valve & HWE Switch
(V41)
3
6
(V42)
7 5
2
4
3
1
1
2 5
4 10
5
7 4
Deck plate 11 (HWE)
12
HDE1 HDE2 7
13
Hydrodrive
gearbox
95PC. 010-2
BoM 950511
1 72-21 Hydrodrive Selector Valve 1

2 124-75 Screw M5 x 30 2
425-12 Nut - Nyloc M5 2
3 72-22 Coil - 24v
4 72-17 Silencer 2
5 537-3 Adaptor 1/8” BSP x 06 3
6 551-1 Stem Elbow Ø6 2
7 273-20 Tube Ø6 - Blue As required
8, 9 -
10 72-52 HWE Air Switch 1

11 129-74 Screw - Cap Head M5 x 45 2
425-12 Nut - Nyloc M5 2
12 540-3 Tee x Ø6 1
13 551-1 Stem Elbow x Ø6 1

VS - Parts
Management Box
5 4
7
D31
R10
6
8 R11
3 EP
PE
95EC.007-4
1 2
BoM 950511
282135-1 Hydro Management Box 12v

282135-2 Hydro Management Box 24v
> 1 283848-1 Box and Lid 1

134-44 Screw Pan Head M4 x 20 4
425-11 Nut - Nyloc M4 4

> 3 283847-1 Management Box Loom includes:- 1
710-67 HDP 31 Way Socket Housing 1
710-70 Jam Nut 1
281545-2 Sealing Washer 1

5 13193 Relay 12v Type 6RA 2
13194 Relay 24v Type 6RA 2

7 13984 Diode 6 Amp 1
> 8 134-60 Screw - Pan Head M5 x 25 1

420-12 Nut M5 1

VT & VS - Parts
CHAPTER 23
Systems Locker
Table of Contents
Section Page
Systems Locker
Systems Wafer Assembly 23 : 2
Systems Locker Enclosure 23 : 4
Page Issue 01 Chapter - Systems Locker 23:1

VT & VS - Parts
Systems Wafer Assembly
23:2 Chapter - Systems Locker Page Issue 01

VT & VS - Parts
Systems Wafer Assembly
Base Assemblies
Part No. Description
950912-021 Wafer Assembly - 12v Single

950912-022 Wafer Assembly - 12v Dual
Options Assemblies for:
Recirculating Water and Autoloc Cylinders

Components
Item No. Part No. Description See Chapter
1 - Main Hydraulic Valve Block 28

2 - Pneumatic Valve Assemblies 29
3 - Powascrub Regulator (R2) 29
4 - Powathrust Regulator (R3) 29
5 - FRL Unit 29
6 - Pressadrain Purge Block (WDT) 29
7 - Water Manifold Assembly 30
8 Thermal Trip:-
719-2 MCB Cutout - 12v = 50Amp -
719-1 MCB Cutout - 24v = 30Amp -
9 Emergency Discharge Pump Switch comprising:-
99-67 Button 1
99-2 Body 1
99-4 Contact 1
10 - System Protection Valve 29
Notes
Wiring Looms - Spares Items
Looms for the Wafer pneumatic, hydraulic and water control systems are shown in Chapter 31.
Page Issue 01 Chapter - Systems Locker 23:3

VT & VS - Parts
Systems Locker Enclosure
9
12 11
1 10
6
8
3 7
95SL. 004-7
4
5
BoM 950512
282868-1 Frame and Door Assembly, comprising items 1 to 8 1
1 281660-1 Locker Frame 1

2 282869-1 Locker Door 1
211-33 Edge Trim x 1m 1
217-58 Rubber Strip x 25 Long 2
3 211-34 Latch 1
211-35 Latch Key 2
4 282870-1 Latch Plate 1
5 135-91 Button Head Screw M6c x 20 2
425-13 Nut - Nyloc M6 2
6 42597-5 Hinge 1
134-41 Screw Pozidrive M4 x 10 12
425-11 Nut - Nyloc M4 12
7 39435 Gas Spring 2

8 420-12 Nut M5 2
9 283826-1 Wafer Base Assembly 1
BoM 950511

11 124-134 Screw M8 x 16 4
12 217-2 Rubber Seal 2
23:4 Chapter - Systems Locker Page Issue 05

VT & VS - Parts
CHAPTER 24
Channel Brush
Table of Contents
Section Page
Channel Brush
Pivot Frame Assembly 24 : 2
Water Jet Assembly 24 : 5
Arm Assembly 24 : 6
Head Assembly 24 : 10
Channel Brush Installations

Pivot Frame to Subframe 24 : 12
Hydraulic Hoses 24 : 14
Pneumatic Tubing 24 : 16
Water Sprays 24 : 17
Rotatilt Option 24 : 18
Page Issue 01 Chapter - Channel Brush 24:1

VT & VS - Parts
Channel Brush - Pivot Frame Assembly
12
91/93 4
11
92/94
13
10 6
5
1 7
3
15
14
16 9
8
21
25
32 26
17 19
31 4
18
2
30
35 29
20
18
17 40
22
23 28
27
33 24
36
39
34 38
37
95CB. 001-5
41
24:2 Chapter - Channel Brush Page Issue 03

VT & VS - Parts
BoM 951211

Single Dual
1 200075-1 Pivot Frame 1 2
2 281587-1 Stop 2 4
3 124-169 Screw M10 x 25 4 8
4 67348-1 Fork 1 2
5 41911-1 Washer - Kick Back Spring 1 2
6 425-18 Nut - Nyloc M16 1 2
7 41895-2 Compression Spring 1 2
8 40295-1 Nozzle Tow Pin 1 2

9 123-146 Screw M12 x 40 2 4
425-16 Nut - Nyloc M12 2 4
10 281601-1 Cylinder 1 2
11 40421-1 Spacer 2 4
12 40420-1 Pin 1 2
13 123-109 Bolt M8 x 45 1 2
14 800678-1 Lever - Brush Curtain 1 2

15 40384-1 Catch 1 2
16 124-103 Screw M6 x 20 1 2
420-13 Nut M6 1 2
17 200051-1 Davit Hinge 2 4

18 127-139 Screw - Csk M8 x 30 4 8
420-14 Nut M8 4 8
19 200046-1 Davit 1 2
20 40382-1 Link 1 2
21 40383-1 Bush - Curtain 1 2
124-143 Screw M8 x 40 1 2
22 40385-1 Link Retaining Pin 1 2
23 124-141 Screw M8 x 35 1 2
420-14 Nut M8 1 2
24 200050-1 Curtain 1 2
25 289-27 Spring Clip 2 4
26 63582-1 Curtain Quick Release Pin 2 4
27 62454-1 Clamp Strip 1 2

28 124-169 Screw M10 x 25 5 10

VT & VS - Parts

Single Dual
29 62822-1 Bracket - Mudflap Mounting 1 2

30 124-169 Screw M10 x 25 2 4
420-15 Nut M10 2 4
31 62819-1 Tow Point 1 2

32 123-151 Bolt M12 x 65 2 4
420-16 Nut M12 2 4
33 67375-1 Plate - Mud Flap 1 2

34 124-167 Screw M10 x 20 2 4
420-15 Nut M10 2 4
35 124-201 Screw M12 x 25 1 2
420-16 Nut M12 1 2
36 282207-1 Water Jet Assembly - See next page 1 2
37 67372-1 Clamp Strip 1 2

38 67378-1 Clamp Bar 1 2
39 457-4 Washer - Plain M8 5 10
425-14 Nut - Nyloc M8 5 10
Curtains
> 40 63334-1 Rubber Curtain 1 2

> 41 67368-1 Rubber Mudflap 1 2
Hydraulic Hoses
*91/93 - See ‘Hydraulic Hoses’ - -

*92/94 - elsewhere in this chapter - -
Notes
* Hose item numbers correspond with those on diagrams SH522 and SH523 in Maintenance
Section, Chapter 8.

VT & VS - Parts
Water Jet Assembly
3
2
5
6
4 95WC. 001-2
BoM 951211
282207-1 Jet Assembly comprising:
1 282214-1 Pipe - Hose Adaptor 1

2 282206-1 Angle Bracket 1
3 21-67 Double Swivel Nozzle Holder 1
4 21-66 Fan Tip Jet - Red 2
6 425-13 Nut - Nyloc M6 1
Notes

VT & VS - Parts
Channel Brush - Arm Assembly
23 22 21
29 23
*3
1
*8
*10
*9
7
*12
40 41 *18
*20 *19
*4
11 14
*6 37 39
*3
29
25b
38
1
*5 *17
24 *2
28
25a 13 *15
*16
7
35
26 *2 *10 30 29
36
34
33 31 32
27 Fit Stowage Stop
Bolt this way round 95CB. 002-3

VT & VS - Parts

BoM 951212
1 40272-2 Pivot Head 1
* 2 40292-1 Bush 4
* 3 40360-1 Pivot Pin - Channel Brush Head 1
* 4 38-1 Grease Nipple Straight G1/8" 1
* 6 124-178 Screw M10 x 55 1
420-15 Nut M10 1
7 200025-1 Lower Arm 1

*8 282028-1 Pivot Pin 1
*9 124-135 Screw M8 x 20 1
11 200026-1 Upper Arm Assembly 1

* 12 29128-4 Bush - Non Lube, Part of Item 11 4
13 40361-1 Pivot Pin - Upper Arm 1
420-16 Nut M12 1

* 15 40389-1 Pivot Pin 1
* 17 124-146 Screw M8 x 55 1
420-14 Nut M8 1
* 18 40362-1 Bush - Upper Arm 1

* 19 40363-1 Spacer M12 2
* 20 123-159 Bolt M12 x 110 1
9331-1 Washer - Packing 2
425-16 Nut - Nyloc M12 1
21 51-43 Plate - Top Clamp 1

51-44 Clamp 1
22 200082-1 Plate - Clamp Spacer 1
23 123-120 Bolt M8 x 100 1
56569-8 Spacer 1
425-14 Nut - Nyloc M8 1
24 800677-1 Lever - Pivot Head 1

25a 124-173 Screw M10 x 35 2
25b 460-11 Washer - Spring M10 2
> 420-15 Nut M10 2
26 124-173 Screw M10 x 35 2

VT & VS - Parts
23 22 21
29 23
*3
1
*8
*10
*9
7
*12
40 41 *18
*20 *19
*4
11 14
*6 37 39
*3
29
25b
38
1
*5 *17
24 *2
28
25a 13 *15
*16
7
35
26 *2 *10 30 29
36
34
33 31 32
27 Fit Stowage Stop
Bolt this way round 95CB. 002-3

VT & VS - Parts
BoM 951212
27 121-115 Screw M14 x 60 1

420-4 Nut M14 1
28 200071-1 Mast 1
29 200355-2 Lift Cylinder 1
29149-4 Clevis Pin ) Spares 1
39624 Retaining Clip ) Items 2
30 200463-1 Pin 1
31 200462-1 Collar 1
124-169 Screw M10 x 25 1
33 124-139 Screw M8 x 30 2
34 40377-1 Bush 1
35 124-178 Setscrew M10 x 55 1
420-15 Nut M10 1
36 90624-1 Spacer 2
37 282965-1 Hose Guard 1

38 124-169 Bolt M10 x 25 3
455-11 Washer 3
39 - Brush Motor and Drive Plate - See Over Page
40 72-64 Pilot Valve 1

41 553-20 Elbow 1
* 282945-1 Channel Brush Overhaul Kit comprising items:

2 to 6, 8 to 10, 12, 15 to 20 Plus two Pivot Pin Bosses
pt.no. 40293-1 which are part of Motor Mount welded assembly,
item 14.
Notes

VT & VS - Parts
Channel Brush - Head Assembly
4 S2
6
2
3
S1
1
7,8
10
95CB. 003-3

VT & VS - Parts
Channel Brush - Head Assembly
BoM 951213

500 Dia. 650 Dia.
Brush Brush
1 42533-1 Mounting - Brush Motor 1 1

2 281325-2 Bush 3 3
3 123-147 Bolt M12 x 45 3 3
425-16 Nut - Nyloc M12 3 3
4 40550-1 Hydraulic Motor 1 -

61108-1 Hydraulic Motor - 1
5 124-208 Setscrew M12 x 45 2 2
420-16 Nut - M12 2 2
6 263-4 Adaptor G1/2" 2 2

451-126 Washer - Copper G1/2" 2 2
7 281586-1 Adaptor - Drive Plate 1 -

8 281584-1 Adaptor - Drive Plate - 1
9 135-58 Bolt - Tuflock M8 x 25 1 1
Brushes. BoM 951230
10 281893-2 Brush Ø500 with Bright Steel Tines - Green Top 1 -

281893-10 Brush Ø500 with Polypropylene Tines - Natural Top 1 -
281899-2 Brush Ø650 with Bright Steel Tines - Green Top - 1

281899-10 Brush Ø650 with Polypropylene Tines - Natural Top - 1
Spares Items
S1 11879 Drive Key

S2 250-2 Motor Seal Kit - Universal (for item 4)
Notes

VT & VS - Parts
CB Installation - Pivot Frame to Subframe
2 2
5 11
3 1 1
6 9
12
CHANNEL BRUSH PIVOT FRAME
4
10
8
1 7
WIDE SWEEP BRUSH TOW PIN
MOUNTING - SINGLE SWEEP 95CB.006

VT & VS - Parts
CB Installation - Pivot Frame to Subframe
BoM 951220

Single Dual
1 282502-1 Mounting Bracket 3 4

2 123-147 Bolt M12 x 45 12 16
45014-25 Spacer 12 16
425-16 Nut - Nyloc M12 12 16
*3 281292-1 Support Post - Front 0.9 to 0.99m in Chassis Height 1 2

281292-2 Support Post - Front 1.0 to 1.099m in Chassis Height 1 2
*4 281292-3 Support Post - Front 0.8 to 0.89m in Chassis Height 1 2
5 281274-1 U-Bolt M12 2 4

425-16 Nut - Nyloc M12 4 8
> 6 124-207 Screw M12 x 40 5 10
455-12 Washer - Plain M12 10 20
425-16 Nut - Nyloc M12 5 10
*7 281296-1 Support Post - WSB 0.9 to 0.99m in Chassis Height 1 -

281296-2 Support Post - WSB 1.0 to 1.099m in Chassis Height 1 -
281296-3 Support Post - WSB 0.8 to 0.89m in Chassis Height 1 -
8 281274-1 U-Bolt M12 2 -
455-12 Washer - Plain M12 4 -
425-16 Nut - Nyloc M12 4 -
*9 281298-1 Support Post - Rear 0.9 to 0.99m in Chassis Height 1 2

281298-2 Support Post - Rear 1.0 to 1.099m in Chassis Height 1 2
*10 282541-1 Support Post - Rear 0.8 to 0.89m in Chassis Height 1 2
11 281274-1 U-Bolt M12 2 4
425-16 Nut - Nyloc M12 4 8
> 12 124-207 Screw M12 x 40 2 4
425-16 Nut - Nyloc M12 2 4
Notes
* Support Posts items 3, 4, 7, 9, 10 see Chapter 33

Post, Item 7, is also shown in Wide Sweep Brush section

VT & VS - Parts
CB Single Sweep Installation - Hydraulic Hoses
41 T 41 T Y CT17
CT22 F CT22 F
Z 43 Z 89
POSITIONED W POSITIONED W SP
ON TOP R * 40 ON TOP R 40
FACE FACE
P1 P1
CT23 CT23 A2 B2
V O V O
42 A1 CT25 93 A1 B1
P2 M L P2 M L
CT1 K CT1 K CT25
J J
FUEL TANK 89 SYSTEMS LOCKER

41
40 84
91 83
86 83
41 43 42
‘T’ ‘Z’ ‘A1’
89 92 86
94 84
SPEED
93 CONTROL
81 (IN CAB)
81
94
92 94
91
83
86
PUMP MOTOR
* HOSE 40
CONNECTIONS
CONNECTIONS
SEE NOTE ON
AS RH. SINGLE
DUAL SWEEP
OPPOSITE
81 89 81
89
R.H. SINGLE SWEEP

L.H. SINGLE SWEEP INSTALLATION
INSTALLATION
95HH. 006-8
BoM 950713, WD 232
Item Nos. Part No. Description Quantity

Single Dual
40 HC08001-86 1/2” Hydraulic Hose 1 1
44 HC08001-167 1/2” Hydraulic Hose - 1
Continued on next page

VT & VS - Parts
CB Dual Sweep Installation - Hydraulic Hoses
41 T Y 80
F CT17
44 Z 43
W SP
FOR WATER PUMP MOTOR CONNECTIONS:-
R 40
VT MACHINES - SEE LP. WATER PUMP
P1
INSTALLATION CHAPTER 30
93 A2 B2 CT22
VS MACHINES - SEE FAN TUB, 94 CT23 V O POSITIONED
HYDRAULIC HOSES CHAPTER 22.HI 42 A1 B1 ON TOP FACE
83 P2 M L
86 CT1
J K CT25
FUEL TANK 90
91 80 SYSTEMS LOCKER
41 40
84
83
41 43 44 42 86 43 84 83
94 42
‘Z’ ‘SP’ ‘A1’ 92 86
89 44
SPEED
CONTROL
93 (IN CAB)
82
92 91 94
90 89
80 82
L.H. DUAL SWEEP

INSTALLATION R.H. DUAL SWEEP
INSTALLATION
95HH. 006-7
BoM 951220

Single Dual
83/84 - See Chapter 33
80/89 HC08002-290 1/2” Hydraulic Hose 2 4


VT & VS - Parts
CB Installation - Pneumatic Tubing
BoM 951220

Single Dual
1 510-4 Tubing Nut - 1

511-4 Olive M8 - 1
2 521-8 Elbow - 1
3 273-20 Blue Tubing 6 Diameter 12m 18m

VT & VS - Parts
CB Installation - Water Sprays
BoM 951220
1 - Water Hoses - See Chapter 30 -

2 282207 Water Jet Assembly - See elsewhere in this chapter -

VT & VS - Parts
Rotatilt Option
10
9
3
CHASSIS
KERB
REAR
8
6
5
12
4
3
1
11
KERB
FRONT
CHASSIS
2
95CB. 008
L.H. ASSEMBLY SHOWN

(R.H. ASSEMBLY IS A MIRROR IMAGE)

VT & VS - Parts
Rotatilt Option
KT 02295
282509-1 Rotatilt Installation 12v

282509-2 Rotatilt Installation 24v

2 123-148 Screw M12 x 50 3
281325-1 Bush x 6.5 Long 3
455-12 Washer 3
425-16 Nut - Nyloc M12 3
3 282508-12 Electric Actuator 12v 1

282508-24 Electric Actuator 24v 1
4 282506-1 Pylon 1
5 42533-1 Brush Motor Mount 1

6 282507-1 Lower Mount Bracket 1
7 281330-2 Clevis Pin 1
124-135 Bolt M8 x 20 1
425-14 Nut - Nyloc M8 1
8 44-63 Plug 3
9 281330-1 Clevis Pin 1

124-135 Bolt M8 x 20 1
425-14 Nut - Nyloc M8 1
10 281314-1 Spacer 2
11 124-171 Bolt M10 x30 3
460 - 11 Washer 3
12 282053-1 Loom - Switch Panel to Actuator 12v 1

282053-2 Loom - Swtich Panel to Actuator 24v 1
Notes
The Rotatilt option requires an Options Switch Panel, see Chapter 32, that includes the
necessary switches and wiring.
See Diagram SE571z01 in Chapter 9 of the Maintenance Section for wiring details.

VT & VS - Parts

VT & VS - Parts
CHAPTER 25
Nozzle
Table of Contents
Section Page
Nozzle
Nozzle Assembly 25 : 2
Wheel Assembly 25 : 5
Nozzle Installation 25 : 6
> Superseded Parts 25 : 8
Page Issue 06 Chapter - Nozzle 25:1

VT & VS - Parts
Nozzle Assembly
SUPERSEDED PARTS - SEE

THE END OF THIS CHAPTER
45,46 14
V 500 ONLY 18 17 CURRENT ITEMS
USED WITH
TYPE ‘B’ CYLINDER
1 42 41
43
2
20 7
35
21
36
38 22
9
39 13 19
37 16
25 28 15
35 44
31 12
32
33 27
24
34 32
27
23
30
29
26
3
7
11 4
5
48
9 49
8 19
95NZ. 002-6
47 40
25:2 Chapter - Nozzle Page Issue 09

VT & VS - Parts
Nozzle Assembly
Carriage. BoM 941111, 951111
Carriage Assembly comprising items 2 to 8:-
1 294081-1 Tow Eye - V 500 Only 1

2 201227-1 Tow Eye - V 605, 650, 800 1
3 201240-1 Towbar 1
4 124-173 Screw M10 x 35 1
425-15 Nut M10 1
5 124-181 Screw M10 x 70 1
425-15 Nut M10 1
6 283360-1 Cradle 1
7 124-173 Screw M10 x 35 4
425-15 Nut M10 4
457-5 Washer Ø10 4
8 283374-1 Pivot Bush 2
9 63491-1 Nozzle Wheel - See over page 2

10 -
Dressing. BoM 951112
11 281420-2 Nozzle - Fully Lined 1
12 281754-1 Bumper 1
13 124-207 Screw M12 x 40 2
425-16 Nut M12 2
455-12 Washer Ø12 2
14 281752-1 Actuator Arm 1

15 281751-1 Pivot Arm 1
16 124-176 Screw M10 x 45 4
425-15 Nut - Nyloc M10 4
475-5 Washer - Large Ø10 4
450-49 Washer - Taper 4
17 280866-1 Mast 1
18 124-175 Screw M10 x 40 2
455-11 Washer Ø10 2
425-15 Nut M10 2
19 283363-1 Pivot Bolt 2

425-20 Nut M20 2
455-16 Washer Ø20 2
20 282968-1 Hook 1
21 62353-4 Link 1
22 124-201 Screw M12 x 25 1
425-16 Nut M12 1
455-12 Washer Ø12 1

VT & VS - Parts
Nozzle Assembly
282538-1 Nozzle Rubber Spares Kit comprising items 23 to 26:-

23 62005-1 Nozzle Rubber - Front 1
24 282230-1 Nozzle Rubber - Rear 1
25 281045-1 Nozzle Rubber - Inner 1
26 281044-1 Nozzle Rubber - Outer 1
282538-3 Nozzle Strip Spares Kit comprising items 27, 28, 29:-
27 94017-1 Clamp Plate - Front/Rear 2
28 63667-1 Clamp Plate - Inner 1
29 63666-1 Clamp Plate - Outer 1
30 136-23 Carriage Bolt M8 x 45 16

455-10 Washer Ø8 16
415-8 Nut M8 - Stainless Steel 16
31 282781-1 Water Jet 1.6mm 2

32 453-1 Fibre Washer Ø20 - 4 Per Jet 8
33 416-12 Locknut M12 - Stainless Steel 2
34 418-12 Domed Nut - Stainless Steel 2
35 26997-1 Banjo Connector 2
36 90696-1 Tee Connector 1
37 46382-3 Hose Adaptor 1

38 39444 Hose 0.34m
40 124-203 Screw M12 x 30 ) Not required when 2

455-12 Washer Ø12 ) Additional Water Option 2
425-16 Nut M12 ) items 47 - 49 is fitted 2
41 284072-1 Lift Cylinder Bracket - V605, 650, 800 1

> 42 284079-1 Lift Cylinder Bracket - V500 Only 1
43 124-171 Screw M10 x 30 2
44 281755-1 Plug G3/4" 1

410-57 Nut G3/4" 1
Actuation. BoM 951113
45 290001-1 Maxigap Cylinder 1

46 - Varagap Cylinder - See Options Section 35.SG 1
Additional Water Option KT 00995
47 - Injection Parts - as standard Front Sprays, items 31 to 39

49 39444 Hose 0.34m
501-1 Hose Clip 4

VT & VS - Parts
Nozzle Wheel
2
9
14
6,7 * 1
3
4,5
10
8
11 95NZ. 003
12
13
63491-1 Nozzle Wheel comprising:
1 16752 Tyre 1
2 63493-1 Hub 1
3 16750-1 Backplate - Tyre 1
4 124-134 Screw M8 x 16 5

6 124-102 Screw M6 x 16 3
8 63495-1 Retainer Plate 1
9 63492-1 Spindle 1
10 14-52 Bearing 1
11 63494-1 Collar 1
12 9114-2 Washer - Special 2
13 425-18 Nut - Nyloc M16 2
14 38-30 Grease Nipple M6 Straight 1
Notes
To withdraw bearing, remove wheel assembly from carriage and refit washer and nut,
items 12 and 13. Insert M6c x 50mm screws (124-113) in the three unused retainer
plate holes*. Tighten each bolt half a turn at a time to extract bearing.

VT & VS - Parts
Nozzle Installation with Current Type ‘B’ Lift Cylinder
CURRENT TYPE ‘B’

CYLINDER ITEMS
8 FOR TYPE ‘A’ CYLINDER ITEMS
10 9 SEE SUPERSEDED PARTS AT
THE END OF THIS CHAPTER
11
12
13
1 2 PNEUMATIC VALVE ISLAND

CONNECTIONS L.H. AND R.H. SWEEP
V2 - PORT 2 V10 - PORT 2
4 16
WATER VALVE
CONNECTIONS
RH. = WO9
L.H. = WO4
17
15
14
L.H. NOZZLE
5 CYLINDERS
3
5
19
17
4
6 18
7
14 6 DIA. BLUE PNEU. TUBING
15 6 DIA. BLACK PNEU. TUBING
17 WATER PIPE
95NZ. 004-8

VT & VS - Parts
Nozzle Installation with Current Type ‘B’ Lift Cylinder
BoM 951120

Single Dual
*1 94990-1 Intake Seat - 0.8 to 0.99m Chassis Height 1 2

94990-3 Intake Seat - 1.0 to 1.099m Chassis Height 1 2
2 127-139 Screw - Countersunk M8 x 30 3 6

460-10 Washer M8 3 6
420-10 Nut M8 3 6
3 94992-2 Nozzle Trunking 1 2

4 504-54 Hose Clip 2 4
† 5 29284-2 Lift Cylinder 1 2
807186 High Chassis Installation Drawing Items 6 and 7:

6 807182-1 Adaptor Plate 1 2
7 124-171 Screw M10 x 35 2 4
455-11 Washer M10 2 4
425-15 Nut - Nyloc 2 4
8 284017-1 Cylinder Mounting Plate 1 2

9 124-171 Screw M10 x 30 2 4
425-15 Nut M10 2 4
10 40405-1 Lifting Eye 1 2
11 40404-1 Clamp Washer 1 2
12 63345-1 Clamp Block 1 2
13 124-176 Screw M10 x 45 2 4
425-15 Nut M10 2 4
>
14 273-20 Pneumatic Tubing Ø6 Blue 10m 16m
15 12869 Pneumatic Tubing Ø6 Black 6m 9m
16 554-3 Tee Adaptor - 2
17 39444 Water Pipe 5m 8m
18 501-1 Hose Clip 2 4
19 60-1 Linch Pin 1 2
Notes
* For Heavy Duty Rubber Lined Intake Seat see Optional Equip’t Chapter 35 - Body Section BD.
Quick release couplings for the air and water pipes can be fitted if nozzles are to be regularly
changed, i.e. standard Maxigap for a full width type as covered in the Sweep Gear section of
chapter 35. Drawing 283544 is available from the parts department listing parts used.
† The superseded Type ‘A’ Lift Cylinder Installation is shown on the next page.

VT & VS - Parts
Superseded Parts - Type ‘A’ Lift Cylinder Installation
3
5
2
4
7
6 9
8
10
95NZ.004-6
1 28903-1 Lift Cylinder - Type ‘A’ 1

28903-111 Rod Eye 1
2 40269-1 Cylinder Hook - Nozzle Lift 1

3 50603-1 Cylinder Hook Bracket - chassis dependant 1
4 124-173 Screw M10 x 35 2
425-15 Nut M10 2
5 124-171 Screw M10 x 30 - 605, 650, 800 Series 2
425-15 Nut M10 2
6 40404-1 Clamp Washer 1

7 40405-1 Lifting Eye 1
8 63345-1 Clamp Block 1
9 294123-1 Spacer Box - V500 Only 1
10 124-178 Screw M10 x 55 - V605, 650, 800 2
123-138 Bolt M10 x 90 - V500 Only 2

VT & VS - Parts
Superseded Parts - Type ‘B’ Lift Cylinder Parts
1
2
95NZ.004-9
1 - Lift Cylinder - Type ‘B’ 1

2 284012-1 Nozzle Lift Link 1
3 124-171 Screw M10 x 30 2
425-15 Nut M10 2
Notes

VT & VS - Parts

VT & VS - Parts
CHAPTER 26
Wide Sweep Brush
Table of Contents
Section Page
Assembly
Wide Sweep Brush Assembly 26 : 2
Tow Bar Installations 26 : 6
Installation
Pneumatics - Suspension Cylinders 26 : 7
Pneumatics - Suspension Regulation, Single Sweep 26 : 8
Pneumatics - Suspension Regulation, Dual Sweep 26 : 9
Hydraulic Hoses 26 : 10
Water - Spray Bar 26 : 14
Page Issue 01 Chapter - Wide Sweep Brush 26:1

VT & VS - Parts
Wide Sweep Brush Assembly
Note: Hydraulic hoses are listed on pages 26:10 and 26:12
21 24
22 21 30
26 51 55 44 45
23
25
15 8
11
17
12,13,14 1 7
2
10 20
9 8
18
28,29 3
19
35 16
43 34 6
27 31,32,33 4
5
8
7
8
37
61 47
36 54
53
56
51 44
42
41 47 52
40 60 45
59
39
48
38 58 57 49 50 46
LEFT HAND DUAL
SWEEP SHOWN 95WB. 009-4
26:2 Chapter - Wide Sweep Brush Page Issue 03

VT & VS - Parts
Carriage Assembly - BoM 951011
1 283102-1 Carriage 1
2 283091-1 Curtain 1
3 124-169 Screw M10 x 25 4
425-15 Nut - Nyloc M10 4
4 200055-1 Rubber Curtain 1

5 283126-1 Retaining Strip 1
6 124-137 Screw M8 x 25 6
425-14 Nut - Nyloc M8 6
7 283090-1 Curtain Support 2

8 124-171 Screw M10 x 30 8
425-15 Nut - Nyloc M10 8
9 62097-1 Anchor Pin 2

10 27-2 Circlip 4
11 283103-1 Compensator 1
12 62095-1 Plate - Keeper 1
13 29395-2 Bearing 1
14 124-135 Screw M8 x 20 2
15 283092-1 Shaft 1
425-7 Nut - Nyloc M20 1
17 265-1 Adaptor 1/8” x 1/4” BSP 1

18 262-2 Adaptor - Bulkhead G1/4” 1
19 38-11 Grease Nipple - 90° 1
20 HC04036-87 Hose - 1/4" Megaflex 1

WSB Slew - BoM 951012
Single Dual
23 283127-1 Slew Retainer - 1

24 283127-2 Slew Retainer 1 -
25 283128-1 Spacer - 2
26 123-154 Bolt M12 x 80 2 2
> 455-12 Washer - Plain M12 4 4
425-16 Nut - Nyloc M12 2 2

VT & VS - Parts

Single Dual
27 29160-1 Cylinder - 1
28 283129-1 Bush - Cylinder Mount - 1
29 123-140 Bolt M10 x 100 - 1
455-11 Washer - Plain M10 - 2
457-5 Washer - Plain M10 Large - 1
425-15 Nut - Nyloc M10 - 1
30 264-2 Adaptor - Bulkhead G1/4” - 2
31 51-51 Clamp - Single 2 -

32 51-50 Clamp - Twin - 2
33 124-111 Screw M6 x 40 2 2
425-13 Nut - Nyloc M6 2 2
34 124-199 Screw M12 x 20 - 1

460-12 Washer - Spring M12 - 1
457-6 Washer - Plain M12 Large - 1
Motor Assembly - BoM 941013, 951013
283110-1 Motor Plate Assembly - V605, 650, 800 ) both comprising

283110-3 Motor Plate Assembly - V500 ) items 36 to 42
35 283112-1 End Plate - V605, 650, 800 1

283231-1 End Plate - V500 Only 1
36 99972-1 Motor - OMPW 200 1

37 124-171 Screw - M10 x 30 4
38 283109-1 Drive Motor Adaptor 1

> 39 62064-1 Washer - Special 1
124-136 Screw M8 x 22 1
41 283105-1 Drive Dog 1
42 124-137 Setscrew M8 x 25 4
43 124-169 Screw M10 x 25 4
Bearing Assembly - BoM 941014, 951014
283111-1 Bearing Plate Assembly - V605, 650, 800 ) both comprising

283111-3 Bearing Plate Assembly - V500 only ) items 44 to 54
44 283112-1 Side Plate - V605, 650, 800 1

293530-1 Side Plate - V500 only 1

VT & VS - Parts
45 283107-1 Bearing - Housing 1

46 14-47 Bearing 1
47 283108-1 Drive Adaptor 1

49 283121-1 Labyrinth 1
50 80-94 ‘O’ Ring 1
51 124-169 Screw M10 x 25 4

53 283106-1 Driven Dog 1
54 124-137 Setscrew M8 x 25 4
55 124-169 Screw M10 x 25 4

WSB Dressing - BoM 941030, 951030
Segment System
283114-1 Stock Assembly comprising items 56 to 58:-
56 283101-1 Stock - One Piece 1

57 283115-1 Closing Plate - Driven End 1
454-8 Washer - Plain M8 Stainless Steel 4
458-8 Washer - Spring M8 Stainless Steel 4
> 59 834-1 Poly Segment - V605, 650, 800 44

> 283385-340 Poly Segment - V500 44
> 60 13515 Spacer 42
Modular System
61 295050-406 Poly Brush Stock - V605, 650, 800 1

295050-340 Poly Brush Stock - V500 1
Notes

VT & VS - Parts
Towbar Installations
2
3
1 5
95WB. 010-5
Towbar Assembly - BoM 951015 (V650, 800). BoM 941015 (V500)
1 283662-1 Towbar - V650, 800 Range 1

293550-1 Towbar - V500 Range 1
WSB Installation - BoM 951020

Single Dual
2 281296-1 Support - Chassis Height 0.9 - 0.99m 1 -

281296-2 Support - Chassis Height 1.0 - 1.099m 1 -
281296-3 Support - Chassis Height 0.8 - 0.99m 1 -
3 281274-1 U-Bolt M12 2 -

455-12 Washer - Plain 4 -
425-16 Nut - Nyloc M12 4 -
4 62099-2 Tow Point - Bush 2 2

5 124-217 Screw M12 x 90 2 2
425-16 Nut - Nyloc M12 2 2
6 62819-1 Box - Towpoint 1 -

7 123-151 Bolt M12 x 65 2 -
460-12 Washer - Spring 2 -
425-16 Nut - Nyloc M12 2 -

VT & VS - Parts
WSB Installation - Pneumatics - Suspension Cylinders
BoM 951020
1 281549-1 Suspension Bracket 2

2 124-199 Screw M12 x 20 4
3 40404-1 Clamp Washer 2
4 63345-1 Clamp Block 2
5 40405-1 Lifting Eye 2
6 124-178 Screw M10 x 55 4
425-15 Nut - Nyloc M10 4
7 29284-2 Pneumatic Cylinder 2

8 273-20 Tube - Blue Nylon 6mm OD
0.9 to 0.99m Chassis Height 6m
1.0 to 1.099m Chassis Height 6.5m
9 24-1 Cable Tie 4

VT & VS - Parts
WSB Pneumatics - Suspension Regulation, Single Sweep
BoM 950713
1 253-9 Regulator 2
2 410-86 Panel Nut 2
3 9756 Plug R1/4" 4
4 552-8 Elbow R1/4" x Ø6 4
5 554-3 Tee Ø6 2
6 549-3 Stem Connector Ø6 2
7 537-8 Straight Adaptor R1/4" x Ø6 2

8 41211-1 Quick Exhaust Valve 2
9 266-2 Adaptor G1/4" x R1/4" 2
451-17 Washing - Sealing 2
10 273-20 Tubing Ø6 Blue 1.16m

11 273-21 Tubing Ø6 Red 0.95m
12 273-20 Tubing Ø6 Blue 0.62m
13 273-21 Tubing Ø6 Red 0.74m
14 559-6 ‘Y’ Connector Ø6 1

VT & VS - Parts
WSB Pneumatics - Suspension Regulation, Dual Sweep
BoM 950713
1 200577 Shuttle/Exhaust Valve Block 2

2 124-102 Screw M6 x 16 4
3 253-9 Regulator 4
4 410-86 Panel Nut 4
5 9756 Plug R1/4" 8
6 552-8 Elbow R1/4" x Ø6 8
7 282855-2 Red Disc 2

8 282855-1 Green Disc 2
9 554-3 Tee Ø6 4
11 559-6 ‘Y’ Connector Ø6 1
12 273-20 Tubing Ø6 Blue x 1 Reel 1

VT & VS - Parts
WSB Installation - Hydraulic Hoses
T Y
CT17
39 F
Z
37 W SP CT22
R POSITIONED
ON TOP FACE
P1
A2 B2 71
CT23 V O
A1 B1 38
P2 M L
CT1 K CT25
J
WATER PUMP MOTOR

CONNECTIONS
71
39
38
37
73 74
70 HOSES AND VALVE

BLOCK PORTS NOT FITTED ON
SINGLE SWEEP INSTALLATIONS AS
72 THERE IS NO SLEW CYLINDER
63
61
64 DIRECTION
71 OF TRAVEL
73
74
60
L.H. SINGLE / L.H. DUAL SWEEP 62
BRUSH CARRIAGE INSTALLATION
95WB. 003-5

VT & VS - Parts
Subframe Configuration BoM 950713, 940713
37 HC08001-155 Hydraulic Hose - Single and Dual Sweep 1

38 HC04001-144 Hydraulic Hose - Dual Sweep Only 1
Carriage Assembly BoM 951011


WSB Installation BoM 951020

Chassis Height
70 † HC04002-95 Hydraulic Hose - Dual Sweep Only 0.8 to 0.99m

HC04002-115 Hydraulic Hose - Dual Sweep Only 0.9 to 099m
HC04002-115 Hydraulic Hose - Dual Sweep Only 1.0 to 1.099m

HC04001-148 Hydraulic Hose - Dual Sweep Only 09.0 to .099m
72 † HC08002-105 Hydraulic Hose - Single and Dual Sweep 0.9 to 0.99m

HC08002-115 Hydraulic Hose - Single and Dual Sweep 1.0 to 1.099m
HC04002-196 Hydraulic Hose - Single Sweep Only 0.9 to 0.99m
Notes
Item numbers correspond to those on Diagram SH522z01 in Maintenance Section, Chapter 8.
† Hoses 70 to 74 see Chapter 33 - Chassis Related Parts.

VT & VS - Parts
T Y
CT17
39 F
Z
37 W SP CT22
R POSITIONED
ON TOP FACE
P1
A2 B2 71
CT23 V O
A1 B1 38
P2 M L
CT1 K CT25
J
WATER PUMP MOTOR

CONNECTIONS
71
39
38
37
73
74
72
70
62
64 60
71
HOSES AND VALVE 73 63
BLOCK PORTS NOT FITTED ON 61
SINGLE SWEEP INSTALLATIONS AS
THERE IS NO SLEW CYLINDER
DIRECTION
OF TRAVEL
R.H. SINGLE / R.H. DUAL SWEEP

BRUSH CARRIAGE INSTALLATION 95WB. 004-5

VT & VS - Parts
Subframe Configuration BoM 950713, 940713

Carriage Assembly BoM 951011


WSB Installation BoM 951020

Chassis Height

HC04002-115 Hydraulic Hose - Dual Sweep Only 0.9 to 099m

HC04001-148 Hydraulic Hose - Dual Sweep Only 09.0 to .099m

Notes
Item numbers correspond to those on Diagram SH522z01 in Maintenance Section, Chapter 8.
† Hoses 70 to 74 see Chapter 33 - Chassis Related Parts.

VT & VS - Parts
WSB Installation - Low Pressure Water Spray Bar
3
2
SYSTEMS LOCKER 5 S1
6
7
WO1
8
10
9 95WB. 006-4
BoM 951020
1 282236-1 Spray Bar Assembly, comprising items 2 to 7:- 1
2 21-334 Spraybar 1
3 21-335 Hosetail 1
4 21-60 Nozzle Holder 1
5 21-64 Seal 1
6 21-66 Fan Tip - Red 1
7 21-63 Bayonet Cap 1
8 39444 Hose 5m
9 501-1 Hose Clip 2
10 - Spray Bar Mounting - varies with chassis

(Contact the Johnston Parts Department for further information)
Spares Items
S1 282236-2 Spray Bar Kit comprising items 4 to 7

VT & VS - Parts
CHAPTER 27
Wanderhose/Littasnatch
Table of Contents
Section Page
Top Mounted Wanderhose

Wanderhose Assembly 27 : 2
Stowage and Trunkings 27 : 6
Extension Hose Stowage Trays 27 : 10
Options
Powaboom Controls - Installation 27 : 12
Powaboom - Hydraulic Hoses 27 : 14
Powaboom - Looms 27 : 15
Littasnatch 27 : 16
Wanderhose and Littasnatch Water Hose Installation 27 : 19
Littasnatch Controls 27 : 20
Mesh Shaker 27 : 22
Littasnatch Combined Mesh Shaker Controls 27 : 24
Mounting Frame
Options Frame 27 : 26
Page Issue 01 Chapter - Wanderhose/Littasnatch 27:1

VT & VS - Parts
Top Mounted Wanderhoses
28 27 26
31 30 41
43
40
42 39
23 22
21 24 29 25 38 37 POWABOOM OPTION
20 See Notes
18 36 34 over page
17
16
15
SPRING BALANCED - STANDARD
13
35 14
1 2 5 6 4 32
7 3 8 33 9
19
12 10,11
1
46
47 44
48
45 49 51 52 50
95WH. 001-4
27:2 Chapter - Wanderhose/Littasnatch Page Issue 01

VT & VS - Parts
Wanderhose Assembly - BoM 941311, 951311, 961311

150 Dia. 200 Dia.
1 41803-1 Turret 1 1
2 41833-1 Pivot Block 2 -
40728-1 Pivot Block - 2
3 123-131 Bolt M10 x 55 4 4
460-11 Washer M10 4 4
4 294085-1 Boom x 150 Dia. - V 500 Only 1 -

294086-1 Boom x 200 Dia. - V 500 Only - 1
281255-1 Boom x 150 Dia. - V 605, 650, 800 Only 1 -
281089-1 Boom x 200 Dia. - V 605, 650, 800 Only - 1
5 40780-1 Flexible Joint 1 1

6 504-51 Hose Clip 1 -
504-52 Hose Clip - 1
7 504-55 Hose Clip 1 1
8 39382 Rubber Stop 1 1

129-65 Screw M5 x 20 2 2
455-7 Washer M5 2 2
425-12 Nut M5 2 2
9 290-28 Bump Stop 1 1

124-36 Screw M4 x 12 1 1
10 282470-1 Jib 1 -
11 282545-1 Jib - 1
12 124-199 Screw M12 x 20 4 4
460-12 Washer M12 4 4
> 13 40755-2 Water Jet 1 1

14 453-1 Fibre Washer 3 3
15 26997-1 Banjo 1 1
16 418-12 Domed Nut M12 1 1
17 46382-3 Hose Adaptor 1 1
18 40746-1 Claw 1 -
41814-1 Claw - 1
19 40420-1 Pin 1 1
20 124-137 Screw M8 x 25 1 1
460-10 Washer M8 1 1
21 62367-1 Anchor 1 1
22 41374-1 Pin 1 1
455-14 Washer Ø16 2 2
23 59-10 Cotter Pin 2 2
24 290-3 Rubber Spring 2 2
124-207 Screw M12 x 40 2 2
425-16 Nut M12 2 2

VT & VS - Parts
Wanderhose Assembly - BoM 951310 - Continued

150 Dia. 200 Dia.
> 25 29170-20 Hydraulic Cylinder - See Chapter 28 1 1

26 29301-1 Flow Control Valve 1 1
451-17 Washer - Sealing 1/4 1 1
27 263-2 1/4" Adaptor 1 1
451-17 Washer - Sealing 1/4 1 1
28 262-2 1/4" Elbow Adaptor 1 1
29 62365-1 Pivot Pin 1 1
455-16 Washer Ø20 2 2
500-106 Split Pin 2 2
30 62366-1 Fork 1 1
13501 Spring 1 1
31 44031-1 Locater 1 1
425-7 Nut M20F 1 1
32 62952-1 Pivot 1 -
49051-1 Pivot - 1
33 49053-1 Pivot Pin 2 -
49052-1 Pivot Pin - 2
455-14 Washer Ø16 2 2
425-18 Nut M16 2 -
34 40746-2 Claw 1 -
41814-2 Claw - 1
35 41836-1 Nut - Special M16 2 2
455-16 Washer Ø20 2 2
36 40691-1 Spring 5 6
37 62953-1 Extension Tube 1 -

62608-1 Extension Tube - 1
38 39382 Rubber Stop 1 1
124-27 Screw M5 x 20 2 2
455-7 Washer Ø5 2 2
425-12 Nut M5 2 2
39 62254-2 Pin 1 -
62254-1 Pin - 1
40 455-16 Washer Ø20 2 2
41 500-106 Split Pin 2 2
42 40377-4 Bush 1 1
43 124-182 Screw M10 x 75 1 1
457-5 Washer Ø10 2 2
425-15 Nut M10 1 1

VT & VS - Parts
Turret Turntable - BoM 951322
44 40722-1 Outer Race 1

45 5955-1 Seal - Cork 1
46 124-167 Screw M10 x 20 6
460-11 Washer Ø10 6
48 22-8 Steel Ball 105
49 40721-1 Inner Race 1

50 40723-1 Seal Plate - Nylon 1
51 5955-1 Seal - Cork 1
52 124-169 Screw M10 x 25 8
460-11 Washer Ø10 8
Notes
For Lo-Level Water Injection see Chapter 35 Optional Equipment - Sweep Gear ‘SG’.

VT & VS - Parts
Wanderhoses - Stowage and Trunkings

VT & VS - Parts
Dressing - BoM 951330 and 961330

Ø150 Ø200
282897-1 Trunking Assembly Ø150 - V 605,650 ) 1 -

282897-2 Trunking Assembly Ø200 - V 605,650 ) Comprising - 1
282900-1 Trunking Assembly Ø150 - V 800 only ) items1 to 3 1 -
282900-2 Trunking Assembly Ø200 - V 800 only ) - 1
1 6004-1 Trunking Ø150 1 -

15916-1 Trunking Ø200 - 1
2 504-51 Hose Clip 2 -
3 6003-1 Coupling Ø150 - V 605,650 1 -

6003-8 Coupling Ø200 - V 605,650 - 1
61045-2 Coupling Ø150 ) 1 -

61045-1 Coupling Ø200 ) - 1
V 800 only
124-201 Setscrew M12c x 25 ) 1 1
453-1 Fibre Washer ) 1 1
4 504-51 Hose Clip 1 -

Powaboom Additions - Items 5 to 10:
5 21216-8 Lift Cable 2 2

6 282637-1 Cable Support 1 -
282638-1 Cable Support - 1
7 123-114 Bolt M8 x 70 1 1
425-14 Nut M8 1 1
8 - Control Loom ) Covered elsewhere

9 - Extension Loom ) in this Chapter
10 6032-1 ‘D’ Shackle
11 6005-1 Trunking 1 -
15917-1 Trunking - 1
12 5996-1 Coupling 1 -
5996-4 Coupling - 1
13 504-51 Hose Clip 1 -

14 6027-1 Hose End Fitting 1 -
15899-1 Hose End Fitting - 1
15 6212-1 Handle 1 -
15920-1 Handle - 1
16 504-51 Hose Clip 1 -
17 282893-1 Extension x 1250 long - Includes Clips item 33 1 -

282890-3 Extension x 1250 long - Includes Clips item 33 - 1

VT & VS - Parts

VT & VS - Parts
Stowage - BoM 951321 and 961321

Ø150 Ø200
18 40781-1 Grab - Spring Balanced Only 1 1

19 40207-1 Hook 1 1
20 294120-1 Boom Support - Powaboom only 1 1
21 420-18 Nut M16 2 2
22 283506-1 Stand-off ) 1 1
23 282738 Plate ) 1 1
24 124-137 Screw M8 x 25 ) V 500, 605 only 2 2
455-10 Washer - Plain ) 2 2
425-14 Nut - Nyloc M8 ) 2 2
25 42463-1 Anchor Bracket - V 605, 650 1 1

61044-1 Anchor Bracket - V 800 only 1 1
26 135-57 Screw M8 x 20 2 2
460-10 Washer 2 2
420-14 Nut M8 2 2
27 42462-1 Anchor 1 -
42738-1 Anchor - 1
28 124-167 Screw M10 x 20 2 2
460-11 Washer 2 2
29 5688-1 Rubber Disc 1 -

5688-2 Rubber Disc - 1
30 6043-1 Retaining Plate 1 1
31 124-135 Screw M8 x 20 1 1
455-10 Washer - Plain 1 1
425-14 Nut - Nyloc M8 1 1
Spare Parts Items
32 Coupling Assemblies Item 3 comprising:

5992-1 Sleeve Ø150 - V 605, 650 1 -
15895-1 Sleeve Ø200 - V 605, 650 - 1
61063-1 Sleeve Ø150 - V 800 only 1 -

61046 Sleeve Ø200 - V 800 only - 1
5999-1 Catch 2 2
58-6 Pin 2 2
6002-1 Spring 2 2
193-8 Screw Pan Head 6 6
33 6216-1 Spring Clip 2 2

VT & VS - Parts
Extension Hose Stowage Trays
Standard on V 500 and 800 machines, optional on 605/650 machines

(500 and 800 bodies have no side lockers)
12 POWAPAK
FRONT VALANCE
1
6
FRONT INSTALLATION 6
2 5 4
5 3
12
‘OPTIONS FRAME’
COVERED ELSEWHERE
IN THIS CHAPTER
7
11
9
REAR INSTALLATION
6
8
10
95WH. 010
9

VT & VS - Parts
Extension Hose Stowage Trays
BoM KT 05795

Front Rear
282867-1 Front Installation 3 -

281995-1 Rear Installation - 3
1 282698-1 Hose Tray Assembly 1 1

2 282879-1 Plunger 4 4
> 3 23-21 Knob 4 4
4 285-27 Spring 4 4
5 457-5 Washer - Large 8 8
*6 124-169 Screw M10 x 25 6 -

455-10 Washer - Plain 6 -
+ 7 20674-1 L.H. Reflective Marker - 1

+ 8 20674-2 R.H. Reflective Marker - 1
+ 9 282704-1 Marker Mounting Bracket - 2
+ 10 138-123 Screw - Socket Hd. Button M8 x 20 - 8
455-10 Washer - Plain - 8
425-14 Nut - Nyloc M8 - 8
11 124-137 Bolt M8 x 25 - 6
425-14 Nut - Nyloc M8 - 6
† 12 52-7 Cable / Pipe Clip 2 2
Notes
* Item 6 - These are the existing screws and washers used to fix the front valance to the
Powapak cradles.
+ Items 7 to 10 are only required on UK spec. machines.
† Item 12 Pipe Clips required for stowing the grab hook on V500 and 800 machines with
no body lockers.

VT & VS - Parts
Powaboom Controls - Installation
CONTROL VALVE ASSEMBLY

VIEWED FROM 150
ARROW ‘B’
152
6 13
16 14
7 FRONT
8
9
17 PR B
14,15 P 14
PL A
REMOTE THROTTLE
VIEWED FROM
ARROW ‘A’
10 153
T
11
12 13
151
1 2 4 5 3
‘B’
‘A’
FRONT
95HC. 009

VT & VS - Parts
Powaboom Controls - Installation
BoM KT 07595
282055-1 Powaboom Control 12v

282055-2 Powaboom Control 24v
Throttle Installation Items 1to 5:

1 - Throttle Loom - See Item 17 1
2 129-36 Screw - Socket Head M4 x 20 2
425-11 Nut - Nyloc M4 2
3 282056-1 Throttle Mount Plate Clamp 1
4 282057-1 Throttle Mount Plate 1
5 124-71 Bolt M5 x 20 2
425-12 Nut - Nyloc M5 2
Control and Lock Valves Installation Items 6 to 16:

6 78352-5 Solenoid Valve 12v 1
78352-25 Solenoid Valve 24v 1
7 201098-1 Solenoid Base 1
425-12 Nut - Nyloc M5 2

10 123-104 Screw M8 x 30 2
455-10 Washer Ø8 2
425-14 Nut - Nyloc M8 2
11 267-2 1/4" Swivel Adaptor 1

12 262-2 1/4" Adaptor 90° 1
13 263-2 1/4" Adaptor 2
14 263-2 1/4" Adaptor 3

15 242-2 1/4" Swivel Elbow 1
16 241-150 Regulator 1
17 - Looms - See over page
150 to 153 Hoses - See over page
Notes
* Hose item numbers correspond with those in hydraulic diagram SH527z01 in Chapter 8.

VT & VS - Parts
Powaboom - Hydraulic Hoses

. Drg 282055
1 P SYSTEMS
LOCKER
(a) Boom Raise

(b) Boom Lower
151 150 152

153
(a) (b)
150
151
BT PA
B A
152
153
95HC. 010
KT07595
1 255-30 Swivel Tee 2
150 HC04002-430 Hydraulic Hose 1/4" 1

Notes
Hose item numbers correspond with those in hydraulic diagram SH527z01 in Chapter 8

VT & VS - Parts
Powaboom - Looms
5
P32
1,2
ESC(B) 283261
ESC(A)
PC BL
NP
1a PB
P31
PL
3
PR
95WH. 008-5
RT1
1b,1c RT1
1d
RT2
RT2
Iveco ‘SP’ and ‘HP’ and VT 12v Loom Assembly 282140-1

comprising items 1 and 1b VS Loom Assembly 282140-3
John Deere ‘SP’ engines. comprising items 1 and 1d
For John Deere ‘HP’
engine see item 2. VT 24v Loom Assembly 282140-2
comprising items 1 and 1c
KT07595
1 282060-1 Remote Throttle Loom (Includes Relay Box 1a) 1

1a Relay Box - requires the addition of components 1b,1c or 1d
1b 13193 Relay 12v (28RA) - 12v VT only. 2
1c 13194 Relay 24v (28RA) - 24v VT only. 2
1d 282119-1 Shorting Link - VS only. 1
2 283140-1 Remote Throttle Loom - John Deere ‘HP’ engines 1
3 282062-1 Powaboom Loom 1

4 282063-1 Extension Loom 1
5 282061-1 Control Loom VT Series 1
282061-2 Control Loom VS Series 1

VT & VS - Parts
Littasnatch
SUPERSEDED PARTS
INNER PLATE 281365-1
15 14 OUTER PLATE 281375-1
16
11
13
15 7
17
57
10
56
8
TONGUE SLOT
10 IDENTIFYING
23 12 FEATURES
18 9 10
21
22 24
19
20 6 2
4
5 3
45
44
27 28
55 54 53
1
50
46
36 37
26 51 52
25 21
59
46 49,50
38
49
60 50
33 48
31 46 47
32
30
29 35
34 36 42
37 40 41 43
38 39 58
95WH. 004-3

VT & VS - Parts
Littasnatch
BoM KT04795
1 282476-1 Cassette Assembly comprising items 2 to 26

> 2 284081-1 Inner Plate 1
> 3 284083-1 Outer Plate 1
4 281370-1 Gate 1
5 118-171 Screw M10 x 30 Stainless Steel 4
420-15 Nut M10 4
6 63449-1 Cylinder - See Chapter 29 1

7 60303-1 Pivot Pin 1
8 29128-1 Bush 2
9 60309-1 Universal Joint 1
10 59-8 Tension Pin 2
11 282990-1 Davit 1
12 60317-1 Pivot Pin 1
13 3637-1 Spring 3
14 60326-1 Location Pin 1
15 60734-1 Spacer 4
16 123-132 Bolt M10 x 60 4
425-15 Nut - Nyloc M10 4
17 60724-1 Link Tube - Suspension 2
18 283328-1 Tube - Hose Connection 1
> 19 40755-2 Water Jet M12 1

20 451-17 Washer - Sealing G1/4" 1
22 453-1 Fibre Washer 2
23 418-12 Domed Nut - M12 Stainless Steel 1
24 26997-1 Banjo 1
25 60744-1 Duct 1
26 504-51 Hose Clip 2
27 280821-1 Stowage Plate -VT650 1

281101-1 Stowage Plate - VT800 1
29 282482-1 Trough Assembly comprising items 30 to 33 2

30 801928-1 Trough 1
31 281580-1 Post 2
32 138-123 Screw Button Head M8 x 20 4
425-14 Nut - Nyloc M8 4
33 123-110 Bolt M8 x 50 2
425-14 Nut - Nyloc M8 2

VT & VS - Parts
Littasnatch
BoM KT04795
34 282484-1 Holster Assembly comprising items 35 to 38 1

35 280560-1 Holster 1
36 282483-1 Support 2
37 124-137 Screw M8 x 25 6
425-14 Nut - Nyloc M8 6
38 123-82 Bolt M6 x 30 4
425-13 Nut - Nyloc M6 4
39 282448-2 Suction Tube Assembly comprising items 40 to 43 1

40 60739-2 Section Tube 1
41 60716-2 Handle 1
42 138-94 Screw Button Head M6 x 20 2
425-13 Nut - Nyloc M6 2
43 124-105 Screw M6 x 25 2
425-13 Nut - Nyloc M6 2
44 60744-2 Duct 1
45 504-51 Hose Clip 1
46 282504-1 Hook Assembly comprising items 47 and 48 3

47 280563-1 Hook 1
48 220-65 Plastic Plug 2
49 281579 Star Plate 2

50 124-137 Screw M8 x 25 10
425-14 Nut - Nyloc M8 10
51 280423-1 Baffle Installation comprising items 52 and 53

52 280360-1 Baffle 1
53 118-135 Screw M8 x 20 4
425-14 Nut - Nyloc M8 4
54 282881-1 Spreader Plate 1

55 127-137 Screw Csk. Head M8 x 25 2
288-33 Round Insert 2
56 39382 Rubber Stop 1

57 129-65 Cap Hd Bolt M5 x 20 2
425-12 Nut - Nyloc M5 2
58 282523-3 Pneumatic Controls - Covered elsewhere in this chapter

59 - Water Hose - Covered elsewhere in this chapter
60 - Mounting Frame - Covered elsewhere in this chapter

VT & VS - Parts
Wanderhose/Littasnatch - Water Hose Installation
HOSE INSTALLA
INSTALLATION
TION FOR RH
BIASED SWEEP MACHINES
LITTASNA
LITTASNATCH
TCH WANDERHOSE
LITTASNA
LITTASNATCH
TCH
NEITHER
FITTED
WANDERHOSE
HOSE INSTALLA
INSTALLATION
TION FOR LH
BIASED SWEEP MACHINES
3 2 1 4 5
LITTASNA
LITTASNATCH
TCH
6,8 95WH. 009 7,8
BoM 950714 - Subframe Services
1 281076-1 Manifold 1
2 124-134 Screw M8 x 16 2
3 18892 Plug R3/8" As Req’d
BoM 951330 - Wanderhose, KT04795 - Littasnatch
4 88-5 Ball Valve As Req’d

5 41006-3 Adaptor - Hose Tail As Req’d
6 39444 Hose Ø10 - Wanderhose 7m
7 39444 Hose Ø10 - Littasnatch 5m
8 501-1 Hose Clip 2

VT & VS - Parts
Littasnatch Controls
LITTASNATCH
B GATE CYLINDER
L.H. INSTALLATION SHOWN

R.H. IS MIRROR IMAGE
A) AIR SUPPLY TO CONTROL SWITCH - 8 DIA. RED
B) TO LITTASNATCH CYLINDER, GATE CLOSE - 6 DIA. BLUE
C) TO LITTASNATCH CYLINDER, GATE OPEN - 6 DIA. BLUE
3 AIR SUPPLY
FROM PORT 1
ON VM10 VALVE
5
6 C A
4
2 B
(PV71)
95WH. 005-3 POSITIONED AT REAR OF SUBFRAME - 7

VT & VS - Parts
Littasnatch Controls
BoM KT03695
282523-3 Pneumatic Controls comprising items:
1 282522-1 Switch Box 1

2 72-50 Air Switch 1
3 548-20 Reducing Stem Ø8 x Ø6 1
4 124-135 Screw M8 x 20 2
> 425-14 Nut - Nyloc M8 2
5 288-28 Grommet 1
6 282458-1 Littasnatch Label No. 2.14 - See Chapter 34 1
7 547-4 Connector 1
Tubing
A 273-23 Tube - Red Ø8 6.5m

B,C 273-20 Tube - Blue Ø6 20m
Notes
For Circuit Diagram see SP545a02 in Chapter 11 of the Maintenance Manual.

VT & VS - Parts
Mesh Shaker
13,14 19
10 15 20
13,14 21 22
16
23
8
11 17
9 18
C 13,14
B
12
C
B

A) 8 DIA. RED TUBING
B) 6 DIA. BLUE TUBING
C) 8 DIA. BLACK TUBING
5
1
6
AIR SUPPLY FROM
4 PORT 1 ON VM10 VALVE
2
95WH. 006-5 A
3
POSITIONED AT REAR OF SUBFRAME - 7

VT & VS - Parts
Mesh Shaker
BoM KT03695
282523-2 Pneumatic Controls comprising items 1 to 7 + A and B
1 282522-1 Switch Box 1

2 72-51 Push Button 1
4 124-135 Screw M8 x 20 2
425-14 Nut - Nyloc M8 2
5 288-28 Grommet 1
6 282458-1 Mesh Shaker Label No. 2.13 - See Chapter 34 1
7 547-4 Connector 1
A 273-23 Tube - Red Ø8 6.5m

B 273-20 Tube - Blue Ø6 10m
BoM KT03195
282519-1 Mesh Shaker Installation comprising items 8 to 23 + C
8 283806-1 Vibrator Assembly - includes items 9 and 10 2

9 546-3 Adaptor G1/8" x Ø6 2
10 553-9 Elbow G1/4" x Ø8 2
11 41041-1 Restrictor Sleeve 2
12 118-201 Screw M12 x 25 ) 2

460-12 Washer - Spring M12 ) Stainless Steel 2
457-6 Washer - Large M12 ) 2
13 282515-2 Connection Plate (4003) 2

14 118-135 Screw M8 x 20 ) 8
454-10 Washer - Plain M8 ) Stainless Steel 8
460-10 Washer - Spring M8 ) 8
>
15 551-1 Stem Elbow Ø6 1
16 555-3 Bulkhead Adaptor Ø6 1
18 554-3 Tee Ø6 1
19 72-20 Silencer 1
20 541-8 Adaptor G1/4" x Ø8 1
21 451-17 Washer - Sealing 1
23 554-4 Tee Ø8 1
C 12870 Tube - Black Ø8 3.5m
Notes

VT & VS - Parts
Littasnatch Combined Mesh Shaker Controls

LITTASNATCH
D GATE CYLINDER
A) SUPPLY TO CONTROL SWITCHES - 8 DIA. RED
A1) SUPPLY TO SWITCH PV71 - 6 DIA. RED
B) TO MESH SHAKER - 6 DIA. BLUE
C) TO LITTASNATCH CYLINDER, GATE OPEN - 6 DIA. BLUE
D) TO LITTASNATCH CYLINDER, GATE CLOSE - 6 DIA. BLUE
3
(PV72)
6
5
B
4
AIR SUPPLY FROM

A1 PORT 1 ON VM10 VALVE
C 7
2 8
LH SWEEP (UK) (PV71) A
D
9
10
POSITIONED AT
95WH. 007-4 REAR OF SUBFRAME
RH SWEEP (EXPORT)

VT & VS - Parts
Littasnatch Combined Mesh Shaker Controls
BoM KT03695
282523-1 Pneumatic Controls comprising items 1 to 10 plus tubing
1 282522-1 Switch Box 1

2 72-50 Air Switch 1
3 72-51 Push Button 1
4 124-135 Screw M8 x 20 2
425-14 Nut - Nyloc M8 2
5 282458-1 Littasnatch Label No. 2.14 ) See 1
6 282458-1 Mesh Shaker Label No. 2.13 ) Chapter 34 1
7 549-3 Stem Ø6 1
8 554-3 Tee Ø6 1
>
Tubing
A 273-23 Tube - Red Ø8 6.5m

A1 273-21 Tube - Red Ø6 0.25m
B,C,D 273-20 Tube - Blue Ø6 20m
Littasnatch and Mesh Shaker Installations are shown on previous pages
Notes

VT & VS - Parts
Options Frame
10
10
12
1 11
3 8.9
4 5
3
6,7,9
95WH.003-2 2 3
BoM KT01695
282437-1 Options Frame Assembly comprising items 1 to 9
1 282432-1 Upper Cross Member 1

2 282433-1 Lower Cross Member 1
3 124-171 Screw M10 x 30 4
425-15 Nut - Nyloc M10 4
4 282439-1 Vertical Strut Assembly comprising items 5 to 9 4

5 282435-1 Strut 1
6 282438-37 Spacer 1
7 123-110 Bolt M8 x 50 1
8 124-137 Screw M8 x 25 2
425-14 Nut - Nyloc M8 3
10 283449-1 Fixing Bracket 2

11 124-135 Screw M8 x 20 4
12 124-135 Screw M8 x 20 4

VT & VS - Parts
CHAPTER 28
Hydraulics
Table of Contents
Section Page
Reservoir
Hydraulic Tank Assembly - VT Range 28 : 2
Hydraulic Tank Assembly - VS Range 28 : 4
Valve Block and Return Manifolds

Main Valve Block (In Systems Locker) 28 : 6
Return Manifolds 28 : 8
Tandem Pump Auxiliary Systems

Auxiliary Valve Block Installation 28 : 10
Oil Cooler Installation 28 : 12
Body Discharge
Emergency Discharge Pump 28 : 14
Sequence Valve - Rear Door Locking 28 : 17
Cylinders
Body Tip Cylinder 28 : 18
Body Prop Cylinder 28 : 20
Rear Door and Powaboom Cylinders 28 : 21
Rear Door Clamping Cylinder 28 : 22
Wide Sweep Brush Slew Cylinder 28 : 23
Channel Brush Pivot Cylinder 28 : 24
Hydraulic Hoses
Hose Part Numbering System 28 : 25
Page Issue 01 Chapter - Hydraulics 28:1

VT - Parts
Hydraulic Tank Assembly - VT Range
5 2 *4
6
7
14
16
15
1
12
13
3
11
8
17
*9 95HC. 002-2
*10
28:2 Chapter - Hydraulics Page Issue 03

VT - Parts
Hydraulic Tank Assembly - VT Range
BoM 950514
281761-1 Hydraulic Tank Assembly Comprising Items 1 to 16: 1
1 281640-1 Tank 1
2 282852-1 Multiflow Filter 1
3 42206-1 Return Pipe 1
4 266-6 Adaptor G3/4" 1
5 124-103 Screw M6 x 20 4
6 69-30 Filler Breather 1

425-12 Nut - Nyloc M5 6
8 15411 Filter 2
9 * 89-15 Valve R1" x G1" 1
10 * 277-137 Adaptor G 1/2” x R1” 1
11 48-328 Level Switch with Connector 1

12 87-1 Level Gauge 1
> 13 521-12 Elbow R3/8" x Ø8 1

15 281965-1 Gasket 1
16 124-167 Screw M10 x 20 4
Mounting Screws
17 124-167 Screw M10 x 20 4

Notes
† Arrow on level switch, Item 11, must point towards top of tank as shown.
* Apply Loctite 542 to tapered threads on Items 4, 9 and 10.

VS - Parts
Hydraulic Tank Assembly - VS Range
4 8
5 9
2 7
6
10 13
4
3
S2
19
12
11 S1
20
21
14
15
13 17
95HC. 021-3
16 18

VS - Parts
Hydraulic Tank Assembly - VS Range
BoM 950514
281880-1 Tank Assembly comprising:-
1 281635-1 Tank 1
2 281779-1 Suction/Return Filter 1
3 66105-1 Adaptor R1 1/4” x G1 x G3/4” 1
4 451-22 Washer - Sealing 1” BSP 2
5 265-11 Adaptor G1 1/4” x G1 1
6 263-7 Adaptor G1” 1
7 54-7 Collar Plug 1 1/4” 1

8 124-171 Screw M10 x 30 4
9 69-30 Filler/Breather 1
10 134-59 Screw M5 x 20 6
425-12 Nut - Nyloc M5 6
11 54-3 Collar Plug 3/8” 1

12 265-2 Adaptor G1 1/4” x G3/8” 2
13 264-4 Adaptor G1/2” 2
14 15411 Suction Filter 2

15 89-15 1” Valve 2
16 66162-1 Adaptor R1” x G1” x G1/2” 1
17 266-7 Adaptor R1” x G1” 1
18 68-26 Swivel Blanking Cap G1” 1
19 87-1 Level Gauge 1

Mounting Screws
21 124-167 Screw M10 x 20 4
Spares Items
> S1 281779-2 Filter Element

S2 281779-3 Filter Gauge
Notes
† Arrow on level switch, Item 18, must point towards top of tank as shown.

VT & VS - Parts
Main Valve Block in Systems Locker
RV2 RV2
RV4 RV4
J L V X J L V X
RV1 RV1
Z Z Y
B2
GL GL B1
CT22
A1 SP
A1 A2
C D C D
K M ZL K M ZL YL CT22
T7 T7
TS TS
P2 A1 P1 W F P2 A1 A2 P1 W F
CT23 CT1
CT1 T T
CT25 CT25 CT23
J J M SP CT17
M V V
B1 B2 Y
K L O R Z K L O R Z
95HC. 016-4
SINGLE SWEEP DUAL SWEEP
283730-12 Main Valve Block - 12v Single Sweep

283730-24 Main Valve Block - 24v Single Sweep
283731-12 Main Valve Block - 12v Dual Sweep

283731-12 Main Valve Block - 12v Simultaneous Sweep
283731-24 Main Valve Block - 24v Dual Sweep
283731-24 Main Valve Block - 24v Simultaneous Sweep

VT & VS - Parts
Main Valve Block in Systems Locker
Spares Items
Valve Part No. Description
A1, A2, B1, B2 847-53 Valve Cartridge

847-54 Seal Kit
847-3 Coil 12v
847-68 Coil 24v
C, Y, Z 847-93 Valve Cartridge

847-95 Seal Kit
847-9 Coil 12v
847-80 Coil 24v
> K, M, YL, ZL 847-5 Valve Cartridge

847-4 Seal Kit
847-3 Coil 12v
847-68 Coil 24v
J, L, V 847-63 Valve Cartridge

847-48 Seal Kit
847-69 Coil 12v
847-70 Coil 24v
D, SP, X 847-59 Valve Cartridge

847-95 Seal Kit
847-9 Coil 12v
847-80 Coil 24v
CT1, CT22, 847-19 Check Cartridge

> 847-20 Seal Kit
CT17 847-94 Check Cartridge
> 847-20 Seal Kit
CT23, CT25 847-92 M6 x 0.75 Orifice
RV1 847-78 Relief Cartridge (175 bar)

847-75 Seal Kit
847-75 Seal Kit
847-75 Seal Kit
TS 282920 Temperature Switch (See TB 1225)
T7, GL 665-8 Test Point G1/4” with ‘O’ Ring

VT & VS - Parts
Return Manifolds
COMPONENTS
3 3,4 5
1 12 10 35 36 1
10
8,9
8,9 2 11 12 3 2
3,4 7
DUAL SWEEP
FUEL TANK SIDE SYSTEM LOCKER SIDE
1 5 1 5
10
8 35 35
10 8
3 3 12 3 3
3,4 12 7 7 3,4
L.H. SINGLE SWEEP R.H. SINGLE SWEEP
(P8)
CONNECTIONS
(P1) (P7)
(P2)
(P4) (P4)
DUAL SWEEP (P3)

(P6)
FUEL TANK SIDE SYSTEM LOCKER SIDE
(P1) (P2)
(P1)
(P2)
(P4) (P8) (P8) (P4)
R.H. SINGLE
L.H. SINGLE SWEEP
(P6,P7) (P3) SWEEP (P3) (P6,P7)
95HC. 033-2

VT & VS - Parts
Return Manifolds
BoM 940713, 950713 Components

Single Dual
282336 Manifold Installation Drawing
1 281548-1 Return Manifold 1 2

2 54-4 Plug 1/2” - 3
3 263-4 Adaptor 1/2” 3 4
4 68-17 Cap - Sealing G1/2” - Req’d when Tandem Pump 1 2
is not fitted.
5 262-4 Swivel Elbow 90° 1/2” 1 1

6 - - - -
7 265-4 Adaptor 1/2” x 3/8” 1 1
8 263-2 Adaptor 1/4” 1 2

9 68-19 Cap - Sealing G1/4” - Fitted to Fuel Tank side on - 1
R.H. Sweep and Systems Locker side on L.H. Sweep
10 263-6 Adaptor 3/4” 1 2

11 255-15 Tee Adaptor - 1
12 124-147 Screw M8 x 60 2 4
* 35 HE12003-80 Hydraulic Hose 3/4” 1 1

> * 36 HE12000-38 Hydraulic Hose 3/4” - 1
* Hose numbers correspond with those in diagrams SH521a01 and b01 in Chapter 8
Connections
Port Connection
(P1) From Port ‘T’ on Systems Locker Main Valve Block (Hose 41)
(P2) From Channel Brush motor (Hose 81 Single Sweep, Hose 82 Dual Sweep)
(P3) From Channel Brush Speed Control in cab (Hose 84)
(P4) From WSB Motor Drain (Hose 74) - Fuel Tank Side, R.H. Sweep
- Systems Locker Side, L.H. Sweep
(P5) -
(P6) From Tandem/Options Pump Valve Block Port ‘T’ (Hose 102)
(P7) From Tandem/Options Pump Valve Block Port ‘A’ (Hose 103)
See Tandem/Options Pump Valve Block, over page for single sweep fittings.
(P8) VT Series - From Hydraulic Tank Return Filter via hose 04 and Powapak floor plate
See Engine PTO Pump Installations, Chapter 22.
VS Series - From Oil Cooler via hose 203 and Powapak floor plate
See Fan Tub - Hydraulic Hoses, Chapter 22.HI
Port numbers correspond with those in diagrams SH521a01 and b01 in Chapter 8

VT & VS - Parts
Tandem/Options Pump Valve Block Installation
TANDEM PUMP
ON AUX. ENGINE
VT ONLY
03
101
VT
102
103
102 103
101
VT 101
VS
7
103
102 8
X
1 6
OPTIONS PUMP
X VS ONLY
5
HYDRODRIVE
GEARBOX
VIEW ON ‘XX’
S1
T9 1
4
MA
MB
2
P 101
S4
T
102
A
S3 103
S2 Spares items 'S see end of parts list'
3
95HC. 006-10

VT & VS - Parts
Tandem/Options Pump Valve Block Installation
KT12195
283699-24 Valve Block Assembly 24v 1

283699-12 Valve Block Assembly 12v 1
1 283689-24 Valve Block - 24v 1

283689-12 Valve Block - 12v 1
3 282069-1 Loom 1
4 124-136 Screw M8 x 22 2
5 124-171 Screw M10 x 30 3
03 ^ See Chapters 22.EI, EJ and EP - Tandem PTO Pumps -

101VT * HC08001-200 Hydraulic Hose 1/2" 1
102 * HC08000-168 Hydraulic Hose 1/2" 1
BoM 950414 - Hoses, VS Hydrodrive Gearbox
6 262-4 Swivel Elbow 90° 1/2” 1

101VS * HC08001-245 Hydraulic Hose 1/2" 1
BoM 950713 - Return Manifold (also see previous page)
7 255-13 Swivel Tee 1/2" 1

8 262-4 Swivel Elbow 90° 1/2” 1
Spares Items
S1 665-18 Test Point G 1/4” 1

S2 847-39 Relief Valve Cartridge 1
S3 847-72 Solenoid Valve Cartridge 1
S4 847-74 Coil - 24v 1
847-73 Coil - 12v 1
Notes
* Hose item numbers correspond with those in hydraulic diagram SH528a01 in Chapter 8.
^ Hose item number corresponds with that in hydraulic diagram SH531a01 in Chapter 8.

VT - Parts
Oil Cooler Installation - Tandem Pump Circuit

VT - Parts
Oil Cooler Installation - Tandem Pump Circuit
Drg. 283641
1 282963-3 Oil Cooler 1

2 124-135 Screw M8 x 20 2
3 263-6 Adaptor 3/4” BSP 2

4 231-43 Hosetail Adaptor 2
5 497-H12 Hose 3/4” (See Chapter 30 - Water Hoses - item 7) 1.0m

6 497-H12 Hose 3/4” 0.5m
501-3 Hose Clip 2
7 6117 Hose 1” (See Chapter 30 - Water Hoses - Item 6) 1
8 262-6 Swivel Elbow 3/4” x 90o 1

9 282812-2 Water Pump Assembly 1
10 264-4 Bulkhead Adaptor 1/2” BSP 2
410-80 Backnut 1/2” BSP 2
Hoses
04 HE12001-122 Hydraulic Hose 3/4” 1

300 HE12002-180 Hydraulic Hose 3/4” 1
These hose item numbers correspond with those in hydraulic diagram SH521a01 Rev. 03

These hose item numbers correspond with those in hydraulic diagrams SH522z01 Rev. 10 and
SH523z01 Rev. 09
Notes

VT & VS - Parts
Emergency Discharge Pump
14
SYSTEMS
02 LOCKER
VT
PUMP ON AUX. ENGINE 34

VT ONLY
30
31 P
P2
02
VS
HYDRODRIVE 13
GEARBOX 9
12 11
02
VS
SWEEPGEAR PUMP
OUTLET PORT (BOTTOM)
VS ONLY
9
10
8
4
5
7
6
2 8
S3
S2
3
S4 12 S5
95HC. 037
Spares Items 'S'
see end of parts list 1
S1 11

VT & VS - Parts
BoM 950714
283707-24 Emergency Discharge Assembly - 24v

283707-12 Emergency Discharge Assembly - 12v
Both Assemblies comprise items 1 to 10:-
1 283706-24 Motor/Pump Unit - 24v 1

283706-12 Motor/Pump Unit - 12v 1
2 125-185 Flanged Bolt M10 x 16 2

3 265-4 Adaptor 1/2" x 3/8" 1
4 265-2 Adaptor 1/4" x 3/8" 1
5 262-2 Swivel Elbow 1/4" x 90° 1

7 124-70 Screw M5 x 16 2
457-1 Washer - Plain Large Ø5 2
425-12 Nut - Nyloc M5 2
8 124-137 Screw M8 x 25 3
9 283688-1 Guard 1
10 283709-1 Label 1
11 282036-1 Pump Cable - Red 1

12 282036-21 Pump Cable - Black 1
282156-1 EDS Solenoid Earth Cable (Not Shown) 1
13 - Subframe Loom Ref.
14 - Hydraulic Tank - covered elsewhere in this chapter

BoM 950713 - VT Hoses
BoM 950515 - VT Hoses
02VT See Chapters 22.EI, EJ, and EP - Pump Installations
BoM 950414 - VS Hoses
02VS ^ HC08001-239 Hydraulic Hose 1/2" 1
See Spares Items over page

VT & VS - Parts
Spares Items
S1 283706-241 Motor - 24v

283706-121 Motor - 12v
S2 283706-242 Starter Solenoid - 24v

283706-122 Starter Solenoid - 12v
S3 283706-30 Hydraulic Pump

S4 283706-31 Mounting Plate
S5 283706-32 Link Cable
Notes
* Hose item numbers correspond with those in hydraulic diagram SH531a01 in Chapter 8.
^ Hose item number corresponds with that in hydraulic diagram SH531b01 in Chapter 8.

VT & VS - Parts
Sequence Valve - Rear Door Locking
283405-12 12v Rear Door Valve Assembly

283405-24 24v Rear Door Valve Assembly
1 847-5 Valve Cartridge (DL)

847-3 Coil - 12v
847-68 Coil - 24v
Notes
Valve fitted to rear of subframe - See Chapter 21 for fitting details

VT & VS - Parts
Body Tip Cylinder
22
21
17
20
15
18
12
14 16
19
11
4 6 7 5
13
3 2
95HC. 011

VT & VS - Parts
Body Tip Cylinder
BoM 950611 Drg. 28940

500/605/650 800
1 28940-4 28940-5 Body Tip Cylinder Assembly 1

2 29100-7 < Spherical Bearing 1
3 38-8 < Grease Nipple 1/8" 90° 1
4 263-2 < Adaptor 1/4" 1

5 263-4 < Adaptor 3/8" x 1/2” 1
6 451-17 < Washer - Sealing 1/4" 1
7 451-19 < Washer - Sealing 1/2” 1
> 8 241-265 < Valve - Over Centre 1

9 5259 < Plug 1/8" 1
Seal Kit 28940-500 comprising:
Item No Description Quantity
11 Seal - 2nd Stage Rod 1

12 Seal - 1st Stage Rod 1
13 Wiper Seal - 2nd Stage Rod 1

14 Wiper Seal - 1st Stage Rod 1
15 ‘O’ Ring 1
16 ‘O’ Ring 1
17 ‘O’ Ring 1
18 Spirol Back-up Ring 1

21 Seal - 2nd Stage Piston 1
22 Grub Screw 1
Notes

VT & VS - Parts
Body Prop Cylinder
4,5
3 4 2 6 9 7 8
95HC. 013
29345-1 Body Prop Cylinder Assembly
2 421-7 Locknut M20 2

3 265-1 Adaptor 1/8" x 1/4" 1
5 29332-1 Special Adaptor 1/8" x 1/4" 1
Item No. Description Quantity
6 Piston Seal 1
7 Rod Seal 1
8 Wiper Seal 1
9 ‘O’ Ring 1
Notes

VT & VS - Parts
Rear Door and Powaboom Cylinders
CURRENT TYPE
11 ‘A’ CYLINDER
8,10 5 4
2 6 7 3 12 5 4
8,9
SUPERSEDED TYPE 95HC. 015-3

‘B’ CYLINDER
BoM 950813, 951312
29170-1 Rear Door Cylinder

29170-20 Powaboom Cylinder
2 29128 Bush 2
3 135-2 Grubscrew M6c x 6mm 1
4 265-2 Adaptor 1/4" x 3/8" 2
5 451-18 Washer - Sealing 3/8" 2
2 Bush 2
6 Wiper Seal 1
7 Rod Seal 1
8 ‘O’ Ring 1
9 Back-up Ring 1
10 Back-up Ring 1
11 ‘O’ Ring 1
12 Piston Seal 1

VT & VS - Parts
Rear Door Clamping Cylinder
2 7 6 8,9 3 4 5 4 3
95HC. 014-2
281565-1 Cylinder Assembly
2 28929-1 Fork End 1

3 263-2 Adaptor 2
5 Piston Seal 1
6 Rod Seal 1
7 Wiper Seal 1
8 ‘O’ Ring 1
9 Back-up Ring 1
Notes

VT & VS - Parts
Wide Sweep Brush Slew Cylinder
3 2 6 7 8,9 4 5 10 4 5
HC. 0014-3
1 29160-1 Wide Sweep Brush Slew Cylinder
2 28928-1 Eye 1
3 29128-1 Bush 1
4 263-2 Adaptor 1/4" 2
4 451-17 Washer - Sealing 1/4" 2
3 Bush 1
6 Wiper Seal 1
7 Rod Seal 1
8 Back-up Ring 1
9 ‘O’ Ring 1
10 Piston Seal 1
Notes

VT & VS - Parts
Channel Brush Pivot Cylinder
3 2 8 4 5 6 4 5
7 10 9 95HC. 012-2
281601-1 Cylinder Assembly 1

2 28928-1 Eye 1
3 29128-1 Bush 1
4 263-2 Adaptor 1/4" 2
3 Bush 1
6 Piston Seal 1
7 Rod Seal 1
8 Wiper Seal 1
9 ‘O’ Ring 1
10 Back-up Ring 1
Notes

VT & VS - Parts
Hydraulic Hose Part Numbering System
Example
Denotes Hydraulic Hose Hose Size Hose Length (Centimetres)
HE 04044-123-180
Hose Type (Specification) Orientation, degrees

(Clockwise of 1st to 2nd)
Coupling Code
Denoted by JEL hose type** Gates
B Type B MegaSpiral Plus (6 Braid)

C Type C Megaflex (M1T)
E Type E Sng. Braid (BE7)
F Type F Twinflex (CM2T)
K Type K MegaSpiral (4 Braid)
**B497 :- For full specification of hose.
Hose Diameter (Bore Size)
03 :- Denotes 3/16" Hose. 12 :- Denotes 3/4" Hose.

04 :- Denotes 1/4" Hose. 16 :- Denotes 1" Hose.
05 :- Denotes 5/16" Hose. 20 :- Denotes 1¼" Hose.
06 :- Denotes 3/8" Hose. 24 :- Denotes 1½" Hose.
08 :- Denotes 1/2" Hose. 32 :- Denotes 2" Hose.

VT & VS - Parts

VT & VS - Parts
CHAPTER 29
Pneumatics
Table of Contents
Section Page
Cylinders
Cylinder Seal Kits 29 : 2
Systems Locker Components

VM10 Valve Island 29 : 4
Regulators 29 : 6
Filter/Regulator (FR) 29 : 7
System Protection Valve 29 : 8
Shuttle Valve 29 : 9
Page Issue 01 Chapter - Pneumatics 29:1

VT & VS - Parts
Cylinder Seal Kits
1 3 2 4 3
O 70mm Bore Cylinder - A

O 50mm Bore Cylinders - B, E, F
F,, and G
1 3 2 4 3
O 50mm Bore Cylinder - C
1 3 2 4 5 6 4 3
O 50mm Bore Cylinder - D 95PC. 002
29:2 Chapter - Pneumatics Page Issue 01

VT & VS - Parts
Cylinder Seal Kits
Channel Brush Cylinders
Cylinder Cylinder Cylinder Seal Kit

Letter Part No. Description Part No.
A 200355-1 Lift Cylinder 200355-500

Not Shown 281614-1 Latch Cylinder Not Repairable
Nozzle Cylinders
B 28903-1 Lift Cylinder 290001-500

C 290001-1 Maxigap Cylinder 290001-500
D 290002-1 Varagap Cylinder 290002-500
Wide Sweep Brush Cylinders
E 29284-2 Lift Cylinders 290001-500
Littasnatch Cylinder
F 63449-1 Gate Cylinder (6") 290001-500
Intake Flap Cylinder
G 280840-1 Flap Cylinder 290001-500
Seals Included in Kits 290001-500 and 200355-500
Item No. Description Quantity Item No. Description Quantity
1 Rod Seal 1 3 ‘O’ Ring 2

2 Bearing 1 4 Piston Seal 1
Seals Included in Kit 290002-500
Item No. Description Quantity Item No. Description Quantity
1 Rod Seal 2 4 Piston Seal Ø50 2

2 Bearing 1 5 ‘O’ Ring 1
3 ‘O’ Ring 2 6 Piston Seal Ø25 1

VT & VS - Parts
VM10 Valve Island

VT & VS - Parts
VM10 Valve Island
VM10 Valve Island
1 283305-021 Valve Island 12v - Single Base

283305-029 Valve Island 12v - Single Options
283305-022 Valve Island 12v - Dual Base
283305-030 Valve Island 12v - Dual Options
283305-023 Valve Island 24v - Single Base

283305-031 Valve Island 24v - Single Options
283305-024 Valve Island 24v - Dual Base
283305-032 Valve Island 24v - Dual Options
Spares Items Quantity
2 860-1 Gasket - Black 1

860-2 Gasket - Red 1
Valve Segments:- Single Single Dual Dual

Base Options Base Options
3 860-5 Segment Code TC6U (12v) 2 2 3 3
860-6 Segment Code NC6U (24v) 2 2 3 3
4 860-9 Segment Code TA6U (12v) 1 2 1 2

860-10 Segment Code NA6U (24v) 1 2 1 2
5 860-7 Segment Code TB6U (12v) 1 2 1 2

860-8 Segment Code NB6U (24v) 1 2 1 2
6 860-3 Segment Code TG6U (12v) 1 1 3 3

860-4 Segment Code NG6U (24v) 1 1 3 3
7 860-30 Blanking Segment B000 5 3 2 -

450-269 Washer - Shakeproof M4 4
Notes
> 12v Segments start with T*** 24v Segments start with N***
* Valve Segments V9/V10, 12 and V13 are replaced with blanking segments (7) on Single Sweep.
H Valve Segments V14/15, V16/17 are replaced with blanking segments (7) on No Options.
For circuit connections see diagrams SP541a02, Single Sweep and SP542a02, Dual Sweep
in Chapter 11.

VT & VS - Parts
Regulators

R2 R3
283526-1 Powascrub (R2) Regulator Assembly 3 -

283524-1 Powathrust (R3) Rgulator Assembly - 3
1 283526-2 Pre-set Regulator 1 -

2 283524-2 Pre-set Regulator - with Yellow Top - 1
3 72-15 Panel Nut 1 1
4 538-3 Swivel Elbow 1/8" x Ø6 2 2
Notes

VT & VS - Parts
Filter/Regulator (FR) Unit

1
3,4
5 6
2 2
S3
9
7 FLOW
S2
8
S1
10
SYSTEMS
LOCKER
LOCATION
95PC. 006-4
221498-1 Filter/Regulator Assembly comprising:-
1 283510-2 Filter/Regulator 1
2 538-9 Swivel Elbow R1/4” x Ø8 2
3 559-121 Quick Release Plug G1/4” 1
559-120 Quick Release Socket G1/4” 1
4 72-60 Elbow R1/4” x G1/4” 1
5 665-26 Test Point 1
6 72-71 Pressure Switch 1
509-5 Adaptor 1/8” NPTF x R1/8” 1
7 72-73 Non Return Valve G1/8” 1

> 8 72-95 Ball Valve G1/8” 1
9 558-2 Nipple R1/4” x R1/8” 1
10 553-3 Swivel Elbow G1/8” x Ø6 1
Spares Items for Filter Unit
S1 72-30 Air Filter Bowl

S2 72-39 Air Bowl Filter
S3 72-29 Gaskit Kit - Not Shown

VT & VS - Parts
System Protection Valve
SYSTEMS
LOCKER
LOCATION
1
2
3 95PC. 012-2
283860-1 Valve Assembly comprising:-
1 6779 Valve 1
2 538-9 Swivel Elbow 1
3 558-3 Bulkhead Connector 1
Notes

VT & VS - Parts
Shuttle Valve Assembly

Single Dual
283527-1 Shuttle Valve Assembly comprising:- 1 2
1 72-1 Shuttle Valve 1 2

2 553-3 Swivel Elbow G1/8” x Ø6 3 6
3 129-38 Socket Capscrew M4 x 25 2 -

129-44 Socket Capscrew M4 x 44 - 2
450-269 Washer - Shakeproof M4 2 2
420-11 Nut M4 2 2

VT & VS - Parts

VT & VS - Parts
CHAPTER 30
Water System
Table of Contents
Section Page
Diagrams
Circuit Diagrams - See Chapter 10
Hoses
Water Hoses - Basic System 30 : 2
Low Pressure Pump

Pump Assembly 30 : 4
Pump Installation 30 : 6
Pump Hydraulic Manifold 30 : 8
Control Valves
Solenoid Valve Assembly 30 : 10
Valves and Manifold - Single Sweep 30 : 11
Valves and Manifold - Dual Sweep 30 : 12
Filters
Rear Water Filter 30 : 13
Water Filter Sub-Assembly 30 : 14
Relief Valve
Relief Valve Installation 30 : 15
Relief Valve Assembly 30 : 16
Washdown Hose
Washdown Hose 30 : 17
Supawash Option 30.SW : 1
Page Issue 01 Chapter - Water System 30:1

VT & VS - Parts
Water Hoses - Basic System
15
7
6
15
11
14 8
13 10
5 4 2
3
9
1 12
95WC. 021-3
BoM 950714 - Subframe Services
1 497-H24 Hose 1 1/2” 1.5m

501-4 Hose Clip 2
2 6117 Hose 1” 2.0m
501-4 Hose Clip 2
24-1 Cable Tie 3
3 497-H12 Hose 3/4” 2.5m

501-3 Hose Clip 2
24-1 Cable Tie 4
4 497-H12 Hose 3/4” 1.2m
501-3 Hose Clip 2
5 6111 Hose 1/2” 0.4m
501-2 Hose Clip 2
30:2 Chapter - Water System Page Issue 01

VT & VS - Parts
Water Hoses - Basic System
BoM 950512 - Powapak Tub
6 6117 Hose 1” - Pump Suction 0.7m

501-4 Hose Clip 2
24-1 Cable Tie 2
7 497-H12 Hose 3/4” - Pump Feed 0.5m

501-3 Hose Clip 2
8 497-H12 Hose 3/4” 1.0m
501-3 Hose Clip 2
BoM 951220 - C.B. Installation, See Chapter 24
9 39444 Hose 3/8” - R.H. Brush Spray (Shown) 3.0m

501-1 Hose Clip 2
39444 Hose 3/8” - L.H. Brush Spray 5.0m
501-1 Hose Clip 2
10 39444 Hose 3/8” - R.H. Gutter Spray (Shown) 6.2m

501-1 Hose Clip 2
39444 Hose 3/8” - L.H. Gutter Spray 11.3m
501-1 Hose Clip 2
BoM 951020 - W.S.B. Installation, See Chapter 26
11 39444 Hose 3/8” 5.0m

501-1 Hose Clip 2
BoM 951120 - Nozzle Installation, See Chapter 25
12 39444 Hose 3/8” - R.H. Nozzle Sprays (Shown) 5.0m

501-1 Hose Clip 2
39444 Hose 3/8” - L.H. Nozzle Sprays 8.0m
501-1 Hose Clip 2
Drg. 807839 - Washdown Hose, See this Chapter
13 6111 Hose 1/2” 1.0m

501-2 Hose Clip 2
14 6111 Hose 1/2” 6.0m
501-2 Hose Clip 2
BoM 951330 - Wanderhose Installation, See Chapter 27
15 39444 Hose 3/8” 7.0m

501-1 Hose Clip 2

VT & VS - Parts
Pump Assembly
11
1
18
5
15
16
17
8
4
6
10
14
13
9
12
19
12
7
13
95WC. 010
14
10

VT & VS - Parts
Pump Assembly
22599-1 Water Pump Assembly comprising:

1 15824-2 Bolt 4
2 15824-3 Valve Assembly 4
3 15824-4 ‘O’ Ring 4
4 15824-5 Diaphragm 2
5 15824-7 Cylinder Head 2

6 15824-8 Crankcase 1 Pair
7 15824-9 Connecting Rod 2
8 15824-10 Tension Pad 2
9 22599-2 Crankshaft 1
10 15824-12 Felt Ring 2
11 15824-13 Manifold 1
12 14-18 Bearing - Connecting Rod 2
13 14-32 Bearing - Crankshaft 2
14 15824-16 Dust Cover 2

15 15824-17 Bolt - Tension Pad 2
16 15824-18 Washer 2
17 15824-19 ‘O’ Ring 2
18 15824-2 Bolt 8
19 - See Pump Installation over page -
15824-6 Repair Kit comprising items 2, 3 and 4
Notes

VT & VS - Parts
Low Pressure Pump Installation
3
2
85 235
69
11 15 12 9 10 9 6
5
17
8
16 13 4 7
14 1 18
VT HYDRAULIC HOSE ROUTING VS HYDRAULIC HOSE ROUTING
85 235
69 69
207
19 19
95WC. 009-8
> Note: The Pump Low Water By-pass Valve option is covered in the Water System
Section (35.WS) of Chapter 35.

VT & VS - Parts
Low Pressure Pump Installation
BoM 950512
282812-2 Water Pump Assembly comprising:
1 22599-1 Water Pump 1

2 49827-1 Elbow 1
3 277-231 Elbow 1
4 244-10 Hydraulic Motor OMP 32 1

244-500 Motor Seal Kit
11879 Key
5 263-4 Adaptor 1/2” 1
451-126 Copper Washer - Sealing 1/2" 1
6 264-22 Adaptor 1/2" Extended 1

7 518-8 Adaptor 1/4" x Ø8 1
8 282809-1 Drive Coupling comprising: 1

9 282809-2 Drive Coupling ) Spares 2
10 282809-3 Drive Coupling - Sleeve ) Items 1
11 282817-1 Key 1

13 124-207 Screw M12 x 40 2
455-12 Washer Ø12 2
425-16 Nut - Nyloc M12 2
14 123-118 Bolt M8 x 90 2
455-10 Washer Ø8 4
425-14 Nut - Nyloc M8 2
15 124-169 Screw M10 x 25 2
16 95780-1 Adaptor 1
17 38-8 Grease Nipple 1/8" x 90° 1
18 124-137 Screw M8 x 25 4
455-10 Washer Ø8 4
† 69 HC08003-40 Hydraulic Hose 1/2” ) See 1

† 85 HC08003-45 Hydraulic Hose 1/2” - VT Only ) Manifold 1
† 207 - See Fan Tub Hoses Chapter 22.HI - VS Only ) over
† 235 HC08002-91 Hydraulic Hose 1/2” - VS Only ) page 1
Notes
† Hose item numbers correspond with those in hydraulic diagrams SH522z01, SH523z01
> and SH534z01 in Chapter 8 of the Maintenance Section.

VT & VS - Parts
Hydraulic Manifold - L.P. Water Pump
SYSTEMS
LOCKER
LOCATION
'F'
'R'
85 39
207
69
40
11
83 TO
CB. SPEED
CONTROL
12
1
4 4
6 3
7 8 5
TO TO
86 39 PORT 'F'
LH. CB.
(SEE ABOVE)
88
73
TO 4 10
WSB TO
95HC.036
3 RH. CB.
9

VT & VS - Parts
Hydraulic Manifold - L.P. Water Pump
BoM 950512
283533-1 Manifold Assembly comprising items 1 to 10
1 281548-1 Manifold 1
2 252-16 Swivel Adaptor 1
3 263-4 Adaptor 1/2” BSP 2
5 262-4 Swivel Elbow 1/2” BSP 1
6 265-100 Restricting Adaptor Ø 0.8 1

7 255-2 Swivel Tee 1/4” BSP 1
8 68-19 Blanking Cap - L.H. Single Only 1
9 54-2 Collar Plug 1/4” BSP 1
10 54-4 Collar Plug 1/2” BSP 1
11 277-56 Swivel Tee 1/2” x 1/2” x 3/8” BSP 1

12 262-3 Swivel Elbow 3/8” BSP 1
Hoses
69, 85, 207 See Previous Page
39, 73 See WSB Hydraulic Hoses Chapter 26
40, 83, 86, 88 See CB Hydraulic Hoses Chapter 24
Notes

VT & VS - Parts
Solenoid Valve Assembly
2 4 6 7 8 9 5 95WC. 013
281372-1 Water Valve Assembly 12v

281372-2 Water Valve Assembly 24v
Each comprising:
1 13170 Filter 1
2 NSS Base 1
3 281372-5 Lock Nut 1
4 40664-13 Lever Kit comprising:
Lever, ‘O’ Ring and Circlip
5 281372-12 Coil 12v 1

281372-24 Coil 24v 1
6 NSS Armature 1
7 NSS ‘O’ Ring 1
8 NSS Armature Housing 1
9 NSS Setscrews 4
281372-3 Overhaul Kit comprising items

1, 2, 4, 6, 7, 8 and 9
281372-4 Seal Kit comprising items 6 and 7

VT & VS - Parts
Valves and Manifold - Single Sweep
W4 W3 W2 W1
3
10
4
W4
W3
W2
W1
TEST POINT
W10
W9
W8
W7
2 5 9 W10
7
8
11 95WC. 012-3
283861-12 Water Manifold Assembly - Single Sweep 12v

283861-24 Water Manifold Assembly - Single Sweep 24v
1 281372-1 Valve 12v N.C. 5

281372-2 Valve 24v N.C. 5
2 283528-1 Manifold 1
3 601-11 Adaptor 1/4" 5
4 601-10 Stem Adaptor 1/4" 5
5 54-14 Plug 1/4" 3

> 7 72-60 Elbow 1/4" 1
8 559-110 Reducer 3/8" x 1/4" 1
9 283629-1 Label 1
10 - Main Loom - See Chapter 31
11 Hose Tail 5

VT & VS - Parts
Water Valve and Manifold - Dual Sweep
W4 W3 W2 W1
3
4
W4
W3
W2
W1
TEST POINT
W10
W9
W8
W7
8
9
W9 W8 W7 W10
2
6
7
10 95WC. 011-3
221499-12 Water Manifold Assembly - Dual Sweep 12V

221499-24 Water Manifold Assembly - Dual Sweep 24V
1 281372-1 Valve 12v N.C. 8

281372-2 Valve 24v N.C. 8
2 283528-1 Manifold 1
3 601-11 Adaptor 1/4" 8

4 601-10 Stem Adaptor 1/4" 8
6 72-60 Elbow 1/4" 1
>
7 559-110 Reducer 3/8" x 1/4" 1
8 283529-1 Label 1
9 - Main Loom - See Chapter 31
10 Hose Tail 8

VT & VS - Parts
Rear Water Filter
281750-20 Water Filter Assembly comprising items 1 to 6:-
1 277-181 Body 1
2 277-185 Bowl - Red Plug (a) 1
3 277-247 Mesh - Grey (200 Micron) 1
4 277-171 ‘O’ Ring 2
5 277-170 Flynut 2
6 277-183 Hose Tail - Straight Ø38 1
Notes

VT & VS - Parts
Water Filter Sub- Assembly
9
8
10
5
11
12
7 6
4
3 95WC. 030-3
BoM 950714
> * 293979-1 Filter Sub-Assembly comprising items 1 to 12:-
1 - Filter Assembly - See previous page

> 2 293976-1 Bracket 1
3 124-132 Screw M8 x 12 3
4 277-260 Check Valve 1

5 277-214 Gasket 2
6 277-261 Elbow 1
7 277-215 Tee 1
8 277-170 Flynut 1
9 277-169 Hose Tail Straight Ø25 1
10 277-171 ‘O’ Ring 1
* 11 277-203 Blanking Cap 1

* 12 277-262 Gasket 1
> * Assembly 293979-2 is available without items 11 and 12 which are not required with Supawash.

VT & VS - Parts
Safety Relief Valve Installation
G
3a
5
2
3b
1
95WC. 015-2
Subframe Services BoM 950714
1 281075-1 Manifold 1
2 124-134 Screw M8 x 16 2
3a 5259 Plug - Used when Wanderhose/Littasnatch
is not fitted 1
3b 5259 Plug - Used to blank off washdown port
when Supawash is fitted 1
4 284150-1 Relief Valve - See over page 1
> 5 277-297 Hose Adaptor 3/4” BSP 1
Note
Relief Valve item 4, shown above and on the next page, has replaced the
previous valve pt. no. 3698-11 which is no longer available. Both valves are
interchangeable. Refer to Technical Bulletin TB 1423 for the introduction of
this current valve.

VT & VS - Parts
Safety Relief Valve Assembly
6
2
4 6
5
12
8
11
9
1 10
95WC. 031
BoM 950714
284150-1 Relief Valve Assembly comprising: 1
1 284150-2 Body 1
2 284150-3 Dome Top 1
3 284150-4 Base 1
4 284150-5 Adjusting Screw 1
5 284150-6 Locknut 1
6 284150-7 Spring End Plate 2

7 284150-12 Spring 1
8 284150-8 Spindle 1
9 284150-9 Ball 1
10 284150-10 Valve 1
11 284150-11 Label 1
12 284150-13 Washer 1
Note
For the introduction of this valve see the note on the previous page.

VT & VS - Parts
Washdown Hose - Not fitted with Supawash Option
1 6137 Spray Nozzle 1

2 6111 Hose 1/2" Bore 6m
501-2 Hose Clip 2
3 3786 Strap and Buckle 1
5 89-1 Valve 3/8" BSP 1

> *6 6105-1 ‘U’ Bolt 2
425-13 Nut - Nyloc M6 4
7 6111 Hose 1/2" Bore x 1m 1
501-2 Hose Clip 2
* 8,9,10 - See notes below
Notes
* Items 8,9,10 - valve mounting and hose stowage are chassis dependant. Contact the Johnston
Parts Department, quoting the machine serial number, for further information.
> These parts, plus item 6, are not supplied with a standard ESU.

VT & VS - Parts

VT & VS Parts
30.SW
Mk II Supawash Option
Table of Contents
Section Page
Circuit Diagram and Hoses

Circuit and Hoses - Feed and Bypass 30.SW : 2
Circuit and Hoses - Hose Reel and Spraybars 30.SW : 4
Circuit Diagram - Schematic 30.SW : 6
Pump Installation
Pump Installation - 1” Water Feed Pipe Assembly 30.SW : 7
Pump and Unloader Installation 30.SW : 8
Hose Reel Installations

L.H. V 605, 650 - Iveco 13 and 15 Tonne Chassis 30.SW : 12
L.H./R.H. V 605, 650 - Most Other Chassis 30.SW : 14
L.H. V 800 - Most Chassis 30.SW : 16
Spraybar Installations
Front Spraybar 30.SW : 18
Nozzle Spraybar 30.SW : 19
Recirculating Option Backflush 30.SW : 20
Supawash Extended Operation

> Hopper Filter Strainer Option 30.SW : 21
Detergent Injection Option

Supawash Detergent Injection System 30.SW : 22
Page Issue 06 Chapter - Water System 30. SW:1

VT & VS Parts
Circuit and Hoses - Feed and Bypass
9 LP. WATER PUMP FEED

TO HOSE REEL PIPE - SEE ELSEWHERE
AND SPRAYBARS IN THIS SECTION
SEE NEXT PAGE 2
1 5
113
8
7
BODY FILTER ASSY.

SEE CHAPTER 20
7 5
8
6
REAR FILTER
SEE CHAPTER 30
95WC. 023-3
30. SW:2 Chapter - Water System Page Issue 01

VT & VS Parts
Circuit and Hoses - Feed and Bypass
BoM KT00195
1, 2 - Pump and Unloader - See Page 30.SW:8

3 - -
4 - See Chapter 30 - Water Hoses, Item 1
5 - See Chapter 30 - Water Hoses, Item 2
6 277-244 Hose Tail 90° x 1” Elbow 1

277-170 Flynut 1 1/2” BSP 1
7 6117 Hose 1” NB x 1.5m 1

8 501-4 Hose Clip 2
9 6111 Hose 1/2” NB x 0.5m 1

501-2 Hose Clip 2
* 113 HCO8002-95 Hydraulic Hose 1/2” BSP 1
Notes
* Hose item number corresponds with that on Supawash diagram SW513a02

elsewhere in this section.

VT & VS Parts
Circuit and Hoses - Hose Reel and Spraybars
5
4
3
111
108
8
107 109
110 106
R.H. NOZZLE
111 SPRAYBAR
1
6
RECIRC. WATER
BACK-FLUSHING
SEE PAGE 30.SW:17
112
95WC.017-6

VT & VS Parts
Circuit and Hoses - Hose Reel and Spraybars
BoM KT00195 - Supawash Pump
1 - Pump and Unloader - See Page 30.SW:8
BoM KT06195 - Hose Reel
2 - Hose Reels - See Pages 30.SW:12 to 16
106 HC08002-320 Hydraulic Hose 1/2” BSP - V 605, 650, 800 1

107 HC06043-51-190 Hydraulic Hose 3/8” BSP - V 605, 650 1
HC06002-51-30 Hydraulic Hose 3/8” BSP - V 800 1
BoM KT05995 - Front Spraybar
3 282466-1 Front Spraybar 1

4 21-31 Spray Jet 7
> 5 - Front Spraybar Installation - See Page 30.SW:18
108 HC08002-372 Hydraulic Hose 1/2” BSP 1
BoM KT02595 - Nozzle Spraybars
> 6 - Nozzle Spraybar Installation - See Page 30.SW:20

BoM KT05895 - Recirc. Backflushing
7 88-33 Valve 1/2” BSPF 1

8 266-4 Adaptor 1/2” BSP x 1/2” BSPT 1
> 451-19 Washer - Sealing 1/2” BSP 1
9 265-3 Adaptor 1/2” x 1/4” BSP 1

Notes
Hose item numbers correspond with those on Supawash diagram SW513a02 on the next page.

VT & VS - Parts
Circuit Diagram SW513a02

VT & VS - Parts
1” Water Pump Feed Pipe Assembly
12
11
10
9 DECKPLATE - SEE
POWAPAK TUB
ASSEMBLY ITEM 3
Use Loctite 5331 to seal threads marked †.

9 To avoid breakage, do not over tighten screwed fitting.
Ensure Check Valve (10) is fitted with flow indicating arrow
pointing upwards as shown.
1
3
4 5
3 6
7
2 8
95WC.006-5
BoM KT00195
283793-1 1" Pump Feed Pipe Assembly for Supawash
1 281667-1 Pipe - Water 1” 1

2 277-128 Tee 1” BSP 1
3 277-149 ‘O’ Ring 2
4 277-125 Hosetail 1” BSP / 1” NB Hose 1
5 277-216 Reducer 1” x 1/2” BSP 1
6 277-220 ‘O’ Ring 1
7 277-217 Hosetail 1
8 277-218 Flynut 1/2” BSP 1
9 277-165 Backnut 1” BSP 2
10 277-163 Gasket 1
11 277-161 Hosetail 1” BSP 1
12 277-162 Flynut 1” BSP 1

VT & VS - Parts
Supawash Pump and Unloader Installation
L.P. WATER
PUMP 25
POWAPAK 24
FLOOR
28 27 5 7 6
104 105 26
23 27
MB
MA
2
28 1
3 4
POWAPAK
REAR VALANCE
RETURN
PORT ‘B’
INLET
PORT ‘A’
22 29
20
18
21
16
17
19
13
15
14 8
95WC.029-4 10
9 11
12

VT & VS - Parts
KT00195
283700-1 Installation Drawing
283710-1 Unloader Assembly comprising items 1 to 7:-
1 283702-1 Unloader 1
451-19 Washer - Sealing Ø1/2” 1
3 263-4 Adaptor 1/2” BSP 1
451-19 Washer - Sealing Ø1/2” 1
4 231-66 Hose Tail 1/2” 1

6 124-171 Screw M10 x 30 1
7 124-139 Screw M8 x 30 1
> 283839-1 Pump Assembly Installation comprising items 8 to 22:-
8 283701-1 Pump Assembly 1

283701-10 Seal Kit )
283701-11 Valve Kit ) Spares Items
283701-12 Ceramic Pipe )
9 231-65 Hose Tail 1

10 263-4 Adaptor 1/2” BSP 1
11 283698-1 Mounting Foot 2

12 123-104 Bolt M8 x 30 3
13 125-185 Bolt - Flanged Head M10 x 16 4
14 283695-1 Bell Housing 1

> 15 129-129 Bolt - Cap Head M8 x 35 3
283681-1 Drive Coupling comprising items 16 to 18:-
16 283684-1 Spider 1
17 283682-1 Hub Ø22 Bore 1
18 283683-1 Hub - Taper Bore 1
> 19 244-15 Hydraulic Motor 1

> 20 129-125 Screw - Cap Head M8 x 25 4

VT & VS - Parts
L.P. WATER
PUMP 25
POWAPAK 24
FLOOR
28 27 5 7 6
104 105 26
23 27
MB
MA
2
28 1
3 4
POWAPAK
REAR VALANCE
RETURN
PORT ‘B’
INLET
PORT ‘A’
22 29
20
18
21
16
17
19
13
15
14 8
95WC.029-4 10
9 11
12

VT & VS - Parts
21 263-4 Adaptor 1/2” BSP 2

22 521-8 Adaptor - Elbow Ø8 1
511-4 Olive Ø8 1
510-4 Tubing Nut 1
41038-1 Sleeve 1
23 - Valve Block - See Chapter 28, Tandem/Options Valve

Block Installation
24 532-23 Stem Tee Ø8 1

25 511-4 Olive Ø8 1
510-4 Tubing Nut 1
26 532-4 Bulkhead Adaptor 1
> 532-5 Locknut 1
27 511-4 Olive Ø8 3
510-4 Tubing Nut 3
41038-1 Sleeve 3
28 12870 Tube - Black Nylon Ø8 2
BoM 950712
> 29 283680-1 Subframe Crossmember - See Chapter 21
* 104 HCO8003-76 Hydraulic Hose 1/2” 1

* 105 HCO8003-76 Hydraulic Hose 1/2” 1
Notes
* Hose item numbers 104 and 105 correspond with those in hydraulic diagram
SH528a01 in chapter 8.

VT & VS Parts
Supawash Lance & Reel - V 605, 650, Left Hand Installation

Iveco 13 and 15 Tonne Chassis only
HOSE REEL
INSTALLATION
*16
*20 *19 *2
VIEW FROM ARROW ‘A’
1 ‘A’
*17 3
*25
*26
2
9
7
15
12
*24 *26
*22 13
8
*18
14 10
6
*23 95OP. 001-4
11
30.SW:12 Chapter - Water System Page Issue 01

VT & VS Parts
Supawash Lance & Reel - V 605, 650, Left Hand Installation

Iveco 13 and 15 Tonne Chassis only
BoM KT 06195
1 667-49 Hose Reel 1

2 - Hydraulic Hose - See item 107 on page 30.SW:4 1
3 263-3 Adaptor 3/8” BSP 1
4 21-71 Lance complete with Swivel Adaptor 1
5 -
6 282229-1 Water Manifold 1

7 54-4 Collared Plug (Remove as Required - See item 11) 6
8 263-4 Adaptor 1/2” BSP 1
9 265-4 Adaptor 1/2” x 3/8” BSP 1
Valves and Decal Quantities, Items 11 to 14, depend on Supawash equipment fitted
12 88-33 Valve 1/2” BSPF As Req’d

13 266-4 Adaptor 1/2” x 1/2” BSPT 1 per Valve
451-19 Washer - Sealing 1 per Valve
14 265-4 Adaptor 1/2” x 3/8” BSP 1 per Valve
451-19 Washer - Sealing 1/2” 1 per Valve
15 - Decals - See Chapter 34
*16 - *26 - See notes below
Notes
* Items 16 to 26 - Hose reel and hand lance installation parts are chassis related. Contact the
Johnston Parts Department, quoting the machine serial number, for further information.
These parts are not supplied with standard ESU’s.
Johnston reference drawings:

The relevent installation drawing can be found via the Chassis Drawing Matrix shown in
chapter 33 page 33:2.

VT & VS Parts
Supawash Lance & Reel - V 605, 650, Multiuse Left and Right Hand Installations
Used on most chassis except Ivecos
‘A’
1 *23
11
15
14 12 13 *24
6
*16
7
*22
10 9
*17 2
*19 4
*20 *21
*18
VIEW FROM
ARROW ‘A’
11 *22 *22 11
3
*25 3
2
*26
6 6
2
*27,*28,*29
RIGHT HAND LEFT HAND
INSTALLATION INSTALLATION
VIEWS SHOWN WITH ITEMS 19 AND 22 CUT AWAY FOR CLARITY 95OP. 002-4

VT & VS Parts
Supawash Lance & Reel - V 605, 650, Multiuse Left and Right Hand Installations
Used on most chassis except Ivecos
BoM KT 06195

3 263-3 Adaptor 3/8” BSP 1
5 -

8 263-4 Adaptor 1/2” BSP 1
9 265-4 Adaptor 1/2” x 3/8” BSP 1

Notes


VT & VS Parts
Supawash Lance & Reel - V 650, 800 Multiuse Installation
*18 *22 *14 *12 *13
11
15
*23
4
6 ‘A’
3
10
1
2
*16
11 *22 *18 *20 *19
*23 *21
*17
6
7
9
2
*16
95OP. 003-4
VIEW FROM ARROW ‘A’

VT & VS Parts
Supawash Lance & Reel - V 650, 800 Multiuse Installation

BoM KT 06195

3 263-3 Adaptor 3/8” BSP 1
5 -

8 263-4 Adaptor 1/2” BSP 1
9 265-4 Adaptor 1/2” x 3/8” BSP 1

Notes


VT & VS Parts
Front Spraybar Installation
95WC. 019-2
The Front Spraybar Installation parts are chassis related. Contact the Johnston Parts Department,
quoting the machine serial number, for further information.


VT & VS Parts
Nozzle Spraybar Installation
4
3
1,6
5
2
95WC. 018-2
BoM KT 02595
282240-1 Spraybar Installation comprising items 1 to 5
1 282231-1 Spraybar 1
2 21-31 Spray Jet 2
> 4 124-139 Screw M8 x 30 2
425-14 Nut - Nyloc M8 2
5 6105-1 ‘U’ Bolt M6 2
425-13 Nut - Nyloc M6 4
6 68-18 Swivel Blanking Cap 1
Notes
For Supawash nozzle spraybar with PM10 spraybars see Options Chapter 35.WS

VT & VS Parts
Recirculating Water Option - Backflushing Installation
112
111
111 112
95WC. 020-3
2 3 4 5 4 6
BoM KT 05895
1 265-3 Adaptor 1/2” x 1/4” BSP 1

5 241-279 Check Valve 1/4” BSP 1
6 263-2 Adaptor 1/4” BSP 1
111 - Hydraulic Hose - See Circuit and Hoses page 30.SW:4

112 - Hydraulic Hose - See Circuit and Hoses page 30.SW:4
Hose item numbers correspond with those on Supawash diagram SW513a01 on page 30.SW:6.

VT & VS Parts
Hopper Filter Strainer Option
BoM KT 08695
282736-1 Water Strainer Adaptor Installation comprising items 1 to 3
1 6974-1 Filter Element 1

2 282606-1 Water Strainer Adaptor 1
3 80-65 ‘O’ Ring 1
Notes
Refer to Product Information Sheet PI 539 for a description of the use of this
Filter Strainer option for extended Supawash operating times.
Page Issue 06 Chapter - Water System 30.SW:21

VT & VS Parts
Supawash Optional Detergent Injection System

VT & VS - Parts
Supawash Optional Detergent Injection System
BoM KT 10795, 10796
283314-1 Tank Assembly comprising items 1 to 9:-
1 283313-1 Detergent Tank - 6 Litre 1

2 21-351 Filter and Hose 1
3 277-233 Hose Tail - Straight 1
4 740-3 Washer 1
5 277-221 Cap 1
6 277-232 Hose Tail - 90° 1

7 272-35 Water Hose - Clear Ø8 I.D. 2m
8 501-1 Hose Clip 2
9 69-30 Filler Breather - 10 Micron 1
283315-1 System Installation - V650 )

Comprising items 10 to 15:-
283315-2 System Installation - V800 )
10 21-350 Chemical Injector 1

11 492-13 Adaptor 1
12 451-19 Washer - Sealing 1/2”BSP 1
13 124-137 Screw M8 x 25 1
14 - Lance - See ‘’Supawash Lance and Reel’’ 1

elsewhere in this chapter.
15 21-352 Adjustable Pressure Head - Specific for this 1
application.
* 107 HC06043-60-190 Hydraulic Hose 3/8”BSP - V650 1

HC06002-60-30 Hydraulic Hose 3/8”BSP - V800 1
Notes
* Item 107 - These hoses replace the standard ones listed on page 30.SW:4

VT & VS - Parts

VT & VS - Parts
CHAPTER 31
Electrical System
Table of Contents
VS Section Page
Hydrodrive Control Box Core Module 31 : 2
Mercedes Hydrodrive Control Box Module 31 : 4
VT & VS Section
Relay Box 31 : 6
Lights
Beacons, Lights and Looms 31 : 8
Wiring Looms
Looms 31 : 12
Page Issue 01 Chapter - Electrical System 31:1

VS - Parts
VS Hydrodrive Control Box Core Module - Euro 4 Chassis Engines

20
19
21
18 DX2
17
PEDAL INTERFACE
INTERFACE
P8
PY 26 PLUG APERTURE
APERTURE
24
25 10
11
1
R8
3 RX
D31 RY
D32
9
14
13
D-TEC
12 15,16
27
8
7
6
2
4
5
23 P8
RDT
22 2
RDT
1
95EC. 008
28
Note: The Control Box Module assemblies listed below comprise the core module, shown on this page,
plus a specific Foot Pedal Module, item 28.
Chassis Core Foot Pedal

Type Module Module
MAN 283189-1 + -
DAF 283189-1 + 809908-1
Renault 283189-1 + 283191-1
Iveco 283189-1 + 809917-1
Mercedes 283893-1 + 809882-1
The Mercedes box is unique and is shown over the page.
31:2 Chapter - Electrical System Page Issue 02

VS - Parts
VS Hydrodrive Control Box Core Module - Euro 4 Chassis Engines
BoM 950420
> 283189-1 Control Box Core Module comprising:-
1 282823-1 Base 1
2 433-2 Clufix fastening M6 4
3 124-100 Bolt M6 x 12 4
4 200469-4 D-Tec 910 V04 Unit - See over page 1

5 124-102 Bolt M6 x 16 4
425-13 Nut - Nyloc M6 4
6 99-29 Override Button 1

99-2 Body Contact N.C. 1
7 282857-1 Support Plate 1
8 42774-5 Spacer 2
124-100 Bolt M6 x 12 4
9 30-256 Dual Terminal Block 7

30-254 End Plate 1
10 124-4 Bolt M3 x 12 2
425-10 Nut - Nyloc M3 2
11 13984 Diode 6A 2
12 30-229 Resistor 2k2 21watt 1
13 30-173 Resistor 300 Ohm 6watt 1
14 13194 Relay 24V 3

16 124-67 Bolt M5 x 10 3
425-12 Nut - Nyloc M5 3
17 124-113 Bolt M6 x 50 1
19 455-8 Washer - Plain 4
20 420-13 Nut M6 1
21 425-13 Nut - Nyloc M6 1
22 282824-1 Lid 1
23 138-91 Socket Button Head Bolt 4
24 31-218 Plug - 17 Way 1

25 124-69 Bolt M5 x 14 2
26 31-391 Plug Housing - 9 - Way 1

27 31-127 Receptacle Housing - 7 Way (DTO1, loose item) 1
28 - Foot Pedal Module - Typical not part of Core Module

VS - Parts
VS Mercedes Hydrodrive Control Box
20
19
21
18 DX2
17 PEDAL
P8 INTERFACE
INTERFACE
PLUG
24
25 10
11
1
RX
3 PSM1
D30 PSM2
D31
D32 PSM3
9 PSM4
14
D-TEC
R8
15,16
8
7
6
2
4
5
23 12
13
22 95EC. 008-4

VS - Parts
VS Mercedes Hydrostatic Control Box Module
BoM 950420
> 283893-1 Mercedes Control Box Module comprising:-
1 282823-1 Base 1
2 433-2 Clufix fastening M6 4
3 124-100 Bolt M6 x 12 4
4 200441-1 D-Tec 910 V04 Unit 1

5 124-102 Bolt M6 x 16 4
425-13 Nut - Nyloc M6 4
6 99-29 Override Button 1

99-2 Body Contact N.C. 1
8 42774-5 Spacer 2
124-100 Bolt M6 x 12 4
9 30-256 Dual Terminal Block 7

30-254 End Plate 1
10 124-4 Bolt M3 x 12 2
425-10 Nut - Nyloc M3 2
11 13984 Diode 6A 2
12 200440-1 Pedal Interface 1

13 124-68 Bolt M5 x 12 2
425-12 Nut - Nyloc M5 2
14 13194 Relay 24V 3

16 124-67 Bolt M5 x 10 3
425-12 Nut - Nyloc M5 3
17 124-113 Bolt M6 x 50 1
19 455-8 Washer - Plain 4
20 420-13 Nut M6 1
21 425-13 Nut - Nyloc M6 1
22 282824-1 Lid 1
23 138-91 Socket Button Head Bolt 4
24 31-218 Plug - 17 Way 2

25 124-69 Bolt M5 x 14 4

VT & VS - Parts
Relay Box - VT & VS
16
14
15
8
19
12 4
18 11 5
13 7
2
17
1 9 10 6
COMPONENT IDENTIFICATION CODES

DB4 DB5 DB6
8 7 6 5 4 3 2 1
DB1 DB2 DB3
Components
not fitted on
Single Sweep
DS1 DS2 P28

D01 D11
P13 PCB1
D15 D21
D07 D12
P29
D09 D13 PCB2 R02 R01
D10 D14 P08
D24 D19 R03 T05
P09
D25 D29
P12 T04
D27 D30
P06 RW
R12 T03
D02 D28
P05 R05
D08 D03
P07 FB T02
P03
D05 D04 R06 T01
RN
P02
D06 D31
R07 RA
P01 P04 RP
D32
95EC.002-5

VT & VS - Parts
Relay Box - VT & VS
BoM 950311

Single Dual
1 282108-1 Base Plate 1 1

2 282114-1 Side Wall 1 1
433-2 Clufix Threaded Insert M6 4 4
138-91 Screw M6 x 12 2 2
3 282117-1 Relay Plate 1 1

433-2 Clufix Threaded Insert M6 2 2
138-91 Screw M6 x 12 2 2
4 48-34 Relay 12v 1 1
48-37 Relay 24v 1 1
5 181-1 Screw Pozidriv M5 x 10 2 2

420-12 Nut M5 2 2
6 48-252 Audible Warning Relay 12v 1 1
48-253 Audible Warning Relay 24v 1 1
7 13981 Relay - Timer 12v 3 5

13982 Relay - Timer 24v 3 5
13983 Timer Relay - Base 3 5
8 281904-1 Arm - Fuse Box Support 1 1
433-2 Clufix Insert M6 2 2
138-91 Screw M6 x 12 2 2
9 282115-1 Relay Support Plate 1 1

138-91 Screw M6 x 12 2 2
10 13193-1 Relay 12v 6 8
13194-1 Relay 24v 6 8
11 282112-1 Plate - Plug Mounting 1 1

138-91 Screw M6 x 12 2 2
12 281903-1 Tee Plate 1 1

138-91 Screw M6 x 12 2 2
13 12904 Relay - 3 Channel 12v 2 2

13867 Relay - 3 Channel 24v 2 2
14 282109-1 Back Plate 1 1
138-91 Screw M6 x 12 4 4
283-14 Clip 1 1
15 282110-1 Front Plate 1 1

16 138-94 Screw - Button Hd M6 x 20 1 1
17 283242-1 Label 1 1
> 18 283501-1 Diode Pack 1 -
283398-1 Diode Pack - 1
13984 Diode (Spares item) 16 26
> 19 283644-1 Printed Circuit Board 1 1

VT & VS - Parts
Beacons, Lights and Looms

Note: Beacons, Marker and Work lights are not supplied on standard ESU’s. They are available as options.
11 3 1
21
4
2
25 12
6
22 13 14
24 26
15 7
23 27
32
31
37
36
31 34
33
35 95EC. 009-4

VT & VS - Parts
BoM KT 01195 - Rear Beacons
1 282793-12 Beacon 12v - Rotating 2

282793-24 Beacon 24v - Rotating 2
2 282462-1 Beacon 24v - Xenon 2
3 282959-12 Beacon 12v - Airport Flashing 2
282959-24 Beacon 24v - Airport Flashing 2
Rear Beacon Installation Drawings:-
283981 Rotating Beacon

283982 Xenon Beacon
283983 Airport Flashing Beacon
Each comprising a beacon, item 1, 2 or 3, plus items 4 to 7
4 295078-1 Cage 1
5 295079-1 Base 1
> 6 116-155 Flanged Bolt M6 x 16 4
7 124-102 Screw M6 x 20 2
8 - 10 - - -
BoM KT 070999 - Front Beacons
11 46-15-24 Beacon 24v - Rotating 1 or 2

46-265 Beacon 24v - Xenon 1 or 2
46-264 Beacon 24v - Airport 1 or 2
Front Beacon Installation Drawings:-
807193-1 24v Rotating Beacon (Includes Wiring, Item15)

807193-2 24v Xenon Beacon (Includes Wiring, Item15)
807193-3 24v Airport Flashing Beacon (Includes Wiring, Item15)
Each comprises a beacon, item 11, plus items 12 to 15:-
12 129-94 Capscrew M6 x 20 3 per beacon

13 433-11 Blind Rivet M6 3 per beacon
14 86-23 Cable Gland 1 per beacon
15 32-17 Cable x 3m (Fittings listed on 807193) 1 per beacon
16 - 20 - - -
Front Beacon Positioning Drawings:-
807198 Single Beacon - Cab Mounted

807199 Dual Beacons - Cab Mounted

VT & VS - Parts
BoM KT 070999 - Front Beacon Bars
21 46-290 Beacon Bar 24v - Rotating 1

46-291 Beacon Bar 24v - Xenon 1
46-292 Beacon Bar 4 Mod 1
46-289 Beacon Bar LED 1
Front Beacon Bar Installation Drawings:-
807195-1 24v Rotating Beacon (Includes Wiring, Item 27)

807195-2 24v Xenon Beacon (Includes Wiring, Item 27)
807195-3 24v 4 Mod Beacon (Includes Wiring, Item 27)
807195-4 24v 3 LED Beacon (Includes Wiring, Item 27)
Each comprises a beacon bar, item 21, plus items 22 to 27:-

23 433-12 Blind Rivet M8 4
24 808749-1 Spacer 4
25 145-1 Studding M8 x 95 4
425-14 Nut - Nyloc M8 4
26 86-20 Cable Gland 1

27 32-78 Cable (Fittings listed on 807195) 3m
28 - 30 - - -
KT01095 - Worklight Installation
31 283230-1 Worklight - 12V As req’d

47-10 Bulb 12v - 55 Watt
283230-2 Worklight - 24V As req’d
47-9 Bulb 24v - 70 Watt
283984 - Rear Worklight Installation
807418/1/INST - Rear Marker Lights
33 46-270 Marker Light 2

34 124-103 Screw Pan Head M3 x 15 4 <
425-13 Nut M3 4
807412/1/INST - Side Marker Lights
35 46-267 Marker Light 4

36 134-42 Screw Pan Head M4 x 12 2 per light
455-5 Washer - Plain 2 per light
425-11 Nut - Nyloc M4 2 per light

VT & VS - Parts
BoM 950324 - Valance and Fittings
> 37 Fuel Tank Valance - See Chapter 33, Access Ladder and Valance
808575-1 Systems Locker Valance (RH Side) - Not Shown 1

124-103 Screw M6 x 20 ) 4
Valance to
455-8 Washer - Plain M6 ) 4
Systems Locker
425-13 Nut - Nyloc M6 ) 4
Notes

VT & VS - Parts
Looms
P15
17
P15
P21
17
28
5
P16
17
1
AUX. PROG PCIA
P22
/MG /VG
17
17
P18
P17
17
9 2
P15
P51
17
7
P11 P14
5 17 PS 30
CAM
P15 BEAC
17
5
26
P29 P05 P05 P06 P12
2 17 17 17 17
P09
P15
17
17
17
5
RELAY DS1 DS2 DD1 P21

BOX 17 17 17 17
P08
9
P01 P02 P03 P13

LS P04
LS
17 17 17 17
2 17
2
3 6 LEGEND
ESC(B)
ESC(A)
ESC(A)
4
29 4 5
4
CV SV PP SF SINGLE SWEEP LOOMS
4 2 23 12
WS 8 WD
2 2
DAW HOL
2 2 SYSTEMS DUAL SWEEP LOOMS
P48
29 29
48
(REQUIRED IN ADDITION
FLS
TRAY
2
TO SINGLE SWEEP
PZ
RT1 27 7 RT2
23
2
22
2
LOOMS ON DUAL
18 9 MACHINES)
HOT
PT
2
8
VS RANGE
ONLY
MCB
13
2
+
VM
25
PG
17
CHASSIS 10 OPTIONS LOOMS

BATTERY 16 CWL
LAS
PE
31
2
-
XXX *CONNECTOR REF.
SV1
12 2 X NO. OF WAYS
AL ML
15 -
EDP
2 2
1
* SEE ABBREVIATIONS
11 +
HR
OPPOSITE
PL
1
2
EMERGENCY
DISCHARGE
PUMP
CONNECT TO
LOOM (6) AT ESC
XX LOOM ITEM NOS.
22 SEE NEXT PAGE
ESC(A) ESC(B)
ESC(A)
4 4
P32
8
24
RT1
RT2
PC
PL
2
3
PR
PL
PB
2
21 23
3
8
26
P31 LWL NP BL AWL
BL
DL
2
8 2 2 8 8
2 95EC. 012a
L-AWL LBEAC LRML RRML RBEAC L-AWL
2 2 2 2 2 2
25 LS
2
14

VT & VS - Parts
Looms
Abbreviations
AL = Auto Lube
AWL = Additional Work Lights - L = Left, R = Right
BEAC = Beacon - L = Left, R = Right
BL = Body Loom
CAM = Camera
CWL = Cowl Work Light
CV = Combivac
DAW = Discharge Audible Warning
DD = Diode Dual
DS = Diode Single
DL = Door Lock
EDP = Emergency Discharge Pump
ESC = Engine Speed Control
FLS = Fuel Load Sensor
HOL = Hydraulic Oil Level
HOT = Hydraulic Oil Temperature
HR = Hopper Raised Switch
LAS = Low Air Pressure Switch
LS = Limit Switch
MCB = Master Circuit Breaker
MG = Maxigap
ML = Marker Light - LR = Left Rear, RR = Right Rear
NP = Number Plate
P = Plugs i.e. ‘B’, ‘C’, ‘T’ and ‘Z’
PCIA = Plug ‘A’ - Chassis Interface
PE = Plug - Engine Management Box
PP = Powapack Plug
PS = Powasave Valve (Channel Brush)(
PL = Powaboom Lower
PR = Powaboom Raise
RT1 = Relay ‘T1’, ‘T2’
SF = Subframe
SV = Supawash Valve
VG = Variagap
VM = Pneumatic Valve Unit
W = Work Light - S = Single, D = Dual

VT & VS - Parts
Looms
P15
17
P15
P21
17
28
5
P16
17
1
AUX. PROG PCIA
P22
/MG /VG
17
17
P18
P17
17
9 2
P15
P51
17
7
P11 P14
5 17 PS 30
CAM
P15 BEAC
17
5
26
P29 P05 P05 P06 P12
2 17 17 17 17
P09
P15
17
17
17
5
RELAY DS1 DS2 DD1 P21

BOX 17 17 17 17
P08
9
P01 P02 P03 P13

LS P04
LS
17 17 17 17
2 17
2
3 6 LEGEND
ESC(B)
ESC(A)
ESC(A)
4
29 4 5
4
CV SV PP SF SINGLE SWEEP LOOMS
4 2 23 12
WS 8 WD
2 2
DAW HOL
2 2 SYSTEMS DUAL SWEEP LOOMS
P48
29 29
48
(REQUIRED IN ADDITION
FLS
TRAY
2
TO SINGLE SWEEP
PZ
RT1 27 7 RT2
23
2
22
2
LOOMS ON DUAL
18 9 MACHINES)
HOT
PT
2
8
VS RANGE
ONLY
MCB
13
2
+
VM
25
PG
17
CHASSIS 10 OPTIONS LOOMS

BATTERY 16 CWL
LAS
PE
31
2
-
XXX *CONNECTOR REF.
SV1
12 2 X NO. OF WAYS
AL ML
15 -
EDP
2 2
1
* SEE ABBREVIATIONS
11 +
HR
ON PREVIOUS PAGE
PL
1
2
EMERGENCY
DISCHARGE
PUMP
CONNECT TO
LOOM (6) AT ESC
XX LOOM ITEM NOS.
22 SEE OPPOSITE
ESC(A) ESC(B)
ESC(A)
4 4
P32
8
24
RT1
RT2
PC
PL
2
3
PR
PL
PB
2
21 23
3
8
26
P31 LWL NP BL AWL
BL
DL
2
8 2 2 8 8
2 95EC. 012b
L-AWL LBEAC LRML RRML RBEAC L-AWL
2 2 2 2 2 2
25 LS
2
14

VT & VS - Parts
Looms
SE551z04
Item No Part No Description Quantity
1 282022-1 Interlink Loom 1

2 282023-1 Interlink Loom - Dual addition 1
3 283440-2 Discharge Pendant 1
4 283260-1 Main Loom 1
5 283265-1 Main Loom - Dual addition 1
6 282020-1 Main Loom - Powapak 1
7 283263-1 Powapak Service Loom 1

8 283261-1 Subframe Loom 1
9 283807-12 Systems Wafer Loom - 12v ) 1

Single Sweep
283807-24 Systems Wafer Loom - 24v ) 1

Dual Sweep
10 283276-1 System Earth Loom 1

11 282036-1 Emergency Pump Feed - Red 1
12 282036-2 Emergency Pump Feed - Black 1
13 283275-1 System Power Cable 1

14 283262-1 Body Main Loom 1
15 17936-305 Earth Cable - Black 1
17 283186-1 Cab Main Loom 1
VT Range Engine Looms
18 282042-1 Iveco Standard Power Engine Loom 1

283851-1 Iveco High Power Engine Loom 1
282041-1 John Deere Standard Power Engine Loom 1
283939-1 John Deere High Power Engine Loom 1
VS Range Systems Loom
18 282050-1 Hydrostatic Systems Loom 1
Ref. only VT Range Engine Management Boxes (PE)
- See Chapter 22 Sections PA and PB
Ref. only VS Range Management Box (PE)
- See Chapter 22 Section PG

19 - 20 - -
Options - See over page

VT & VS - Parts
Looms
SE551z04
Item No Part No Description Quantity
Options
Powaboom

22 282061-1 Control Loom 1
* 23 282062-1 Powaboom Control Loom 1
24 282060-1 Remote Throttle Control Loom 1
* Remote Throttle without Powaboom
23 282160 Throttle Control Loom - VT Range 1

282161 Throttle Control Loom - VS Range 1
Additional Worklights
25 293774-1 Additional Rear Worklights Loom 1

26 283235-1 Main Loom - Rear Door Accessories 1
Supawash
27 282069 Supawash Loom 1
Maxigap / Varagap
28 283233 Maxigap / Varagap Link Loom 1
Channel Brush
29 282053 Rotatilt Loom 1
30 283504 Powasave Loom 1
Notes

VT & VS - Parts
CHAPTER 32
Cab Controls
Table of Contents
Section Page
Cab Controls
Cab Mounted Controls 32 : 2
Discharge Control
Load Discharge Pendant 32 : 3
Switch Panel
Switch Panel Assembly 32 : 4
Powapak Control Panel - VT Range 32 : 8
Powapak Control Panel - VS Range 32 : 10
Channel Brush
Channel Brush Speed Control 32 : 11
Powasave Control - Option 32 : 12
Dual Steer
Dual Steer Changeover Control 32 : 13
Page Issue 01 Chapter - Cab Controls 32:1

VT & VS - Parts
Cab Mounted Controls
2 6
4 7 5 3 95CN. 002-3
Item No. Description Page
1 Load Discharge Pendant 32 : 3
* 2 Switch Panel 32 : 4
* 3 Powapak Control Panel 32 : 8 - 10
* 4 Channel Brush Speed Control 32 : 11
* 5 Powasave Pressure Control 32 : 12
* 6 Dual Steer Changeover Control 32 : 13
7 Control Relay Box Chapter 31
Notes
* The Mountings and positions of these controls are chassis related. Contact the Johnston Parts
Department, quoting the machine serial number, for further information.
The Mounting Parts are not supplied with standard ESU’s.

Chapter 33 page 33:2.
32:2 Chapter - Cab Controls Page Issue 01

VT & VS - Parts
Load Discharge Pendant
96CN. 003
BoM 950313
283440-2 Discharge Pendant Assembly 1
Notes

VT & VS - Parts
Switch Panel
4,24
19 25 19 SUPERSEDED
TYPE 'A' SWITCH
(SHOWN FOR
REFERENCE ONLY)
15
20 7 6 5 5 6 7 20
2 3 3 2 16 2 3 3 2
10 8 9 11 9 8 10
18 22 23 12 14 13 17 21 18
2 3 3 3 3 3 3 3 2
ROCKER
INCORPORATING SWITCH
DECAL
26
CURRENT TYPE 'B' SWITCH
95CN. 003-4
BoM 950310
VT Panel Assemblies

Type ‘B’ Switches
> 950312-60 to 63 Iveco Standard Power 24v Switch Panels

950312-64 to 67 Iveco High Power 24v Switch Panels
> 950312-68 to 71 John Deere Standard Power 12v Switch Panels

> 950312-72 to 75 John Deere High Power 12v Switch Panels
VS Panel Assemblies
950312-43 to 46 Hydrodrive 12v Switch Panels

950312-47 to 50 Hydrodrive 24v Switch Panels
Note
Quote machine serial number when ordering a replacement panel.

VT & VS - Parts
Switch Panel
Drg. 950312 shts 3, 4

Type ‘B’
Switches Single Dual
1 282350-1 Switch Panel Casing 1 1

2 735-70 Switch Frame - End Piece 6 6
3 735-71 Switch Frame - Centre Piece 11 11
4 Maxigap:
99-95 Joystick - 2 Position 1 1
99-1 Body Contact 1 1
5 Wide Sweep Brush:

735-07 Switch - 3 Position, Detent 12v 1
735-27 Switch - 3 Position, Detent 24v 1 2
735-103 Rocker with Wide Sweep Brush Decal 1 2
735-60 Blanking Plate 1 -
6 Nozzle:
735-102 Rocker with Nozzle Decal 1 1
7 Channel Brush:
735-101 Rocker with Channel Brush Decal 1 1
8 Gutter Spray:
43-100 Switch - Low Pressure Water 12v 1 2
43-200 Switch - Low Pressure Water 24v 1 2
9 Inlet Flap:
43-102 Switch - Inlet Flap 12v - 2
43-202 Switch - Inlet 24v 24v - 2
10 Worklamp:
43-101 Switch - Worklamp 12v 1 2
43-201 Switch - Worklamp 24v 1 2
11 Programme Switch:
99-92 Base + Light 12v 1 1
99-93 Base + Light 24v 1 1
99-4 Contact - N.O. 1 1
99-94 Operating Head 1 1
12 735-60 Blanking Plate 1 1

VT & VS - Parts
Switch Panel
Type ‘B’
13 Beacon:
735-108 Rocker with Beacon Decal 1 1
14 Low Water/Speed Selector

735-09 Switch - 3 Position, Spring Centre 12v ) 1 1
> 735-29 Switch - 3 Position, Spring Centre 24v ) Part of 1 1
> 735-121 Rocker with Low Water/Speed Select ) item 26 1 1
Decal )
Options
15 Powathrust - KT00395
43-104 Switch 12v 1 1
43-204 Switch 24v 1 1
43-1 Blanking Plate (when not fitted) 1 1
16 Powascrub - KT00495
43-103 Switch 12v 1 1
43-203 Switch 24v 1 1
17 Supawash - KT06595
735-106 Rocker with Supawash Decal 1 1
18 Recirculation Water - KT07795

735-107 Rocker with Recirculation Water Decal 1 2
19 Variabrush - KT00295 LHS RHS Dual

735-11 Switch - 3 Position, Spring Centre 12v 1 1 2
735-110 Rocker with LH Variabrush Decal 1 - 1
735-111 Rocker with RH Variabrush Decal - 1 1
735-60 Blanking Plate (when not fitted) 1 1 2
20 Rotatilt - KT07695
735-104 Rocker with LH Rotatilt Decal 1 - 1
735-105 Rocker with RH Rotatilt Decal - 1 1
735-60 Blanking Plate (when not fitted) 1 1 2

VT & VS - Parts
Switch Panel

Type ‘B’
21 Additional Lights - KT08195

735-120 Rocker with Additional Lights Decal 1 1
22 Additional Worklight - KT07995

735-118 Rocker with Additional Worklight Decal 1 1
23 Additional WSB Water - KT08095

735-119 Rocker with Additional WSB Water Decal 1 1
24 Varagap - KT07895
99-96 Joystick - 3 Position Spring Return 1 1
99-1 Body Contact 1 1
BoM 950312
> 25 282237-2 Instrument Panel - Iveco High Power Engine 1

282237-3 Instrument Panel - VS Hydrodrive 1
282237-4 Instrument Panel - Iveco Standard Power and
John Deere Standard and High Power Engines 1
26 Powapak Control Panel - See over page
Notes
Instrument panels, item 25, have a code number on a label on the back.
Quote this number when ordering a replacement.
> The numbers are:

Iveco High Power - Code No.0003
Iveco Standard Power and

John Deere Standard and High Power - Code No.0004
Hydrodrive - Code No.0005

VT - Parts
VT Range Powapak Control Panels
IVECO ENGINES
2 7 3,5 6,5 11,12
50
10
0 0P
SI
25 oC
1
‘A’ - Standard Power Engine Panel Assembly 283587-1 8
2 7 3,5 4,5 6
1
‘B’ - High Power Engine Panel Assembly 283853-1 8
JOHN DEERE ENGINES
2 7 3,5 6,5 11,12
50
10
0 0P
SI
25 oC
1
‘C’ - Standard Power Engine Panel Assembly 283586-1 8
2 7 3 9 10
Src:Eng
SPN00000
1
‘D’ - High Power Engine Panel Assembly 283590-1 8
95CN. 011-3

VT - Parts
VT Range Powapak Control Panels
Drg. 950312
‘A’ ‘B’ ‘C’ ‘D’

1 282353-1 Mounting Plate - 1 - -
282353-2 Mounting Plate 1 - 1 -
282353-4 Mounting Plate - - - 1
2 135-151 Screw - Pan Head M4 x 16 4 4 4 4
3 Engine Ignition:
735-30 Switch - 3 Position, Spring Centre 24v 1 - - -
735-34 Switch - 2 Position, Detent 24v - 1 - -
735-10 Switch - 3 Position, Spring Centre 12v - - 1 -
735-14 Switch - 2 Position, Detent 12v - - - 1
735-125 Rocker with Ignition Decal 1 1 1 1
4 Engine Resume:
735-28 Switch - 3 Position, Spring Centre 24v - 1 - -
735-116 Rocker with Engine Resume Decal - 1 - -
5 735-70 Switch Frame - End Piece 2 2 2 -
6 735-60 Switch Blanking Plate 1 1 1 -
7 Engine Start:
99-93 Base + Light 24v 1 1 - -
99-92 Base + Light 12v - - 1 1
99-4 Contact - N.O. 1 1 1 1
99-5 Contact - N.C. 1 1 1 1
99-67 Operating Head 1 1 1 1
> 8 - Switch - Low Water/Engine Speed

See ‘Switch Panel’ item 14.
9 31-497 Potentiometer 4k7 - - - 1

10 282934-1 Diagnostics Gauge - - - 1
11 12705 Gauge Blanking Plate 1 - 1 -
(Used when item 12 is not fitted)
KT00695
12 282740-1 Gauge Pod - Oil Press./Water Temp. (Optional) 1 - 1 -
Switch Details
ROCKER INCORPORATING DECAL
SWITCH
95CN. 011-2

VS - Parts
VS Range Powapak Control Panel
4 3
2 6 1 5 5 7
95CN. 004-10
Assemblies
283589-1 HydroDrive 12v

283589-2 HydroDrive 24v

Type ‘B’
Switches
1 282353-3 Plate - Hydrodrive 1

2 135-151 Screw Pan Hd. M4 x 16 4
3 735-08 Switch - 3 Position, Spring Centre 12v 1

735-28 Switch - 3 Position, Spring Centre 24v 1
735-109 Rocker with Master Switch Decal 1
4 735-08 Switch - 3 Position, Spring Centre 12v 1

735-28 Switch - 3 Position, Spring Centre 24v 1
735-113 Rocker with Gearbox Engage Decal 1
5 735-70 Switch Frame - End Piece 2
6 735-07 Switch - 3 Position, Detent 12v 1

735-27 Switch - 3 Position, Detent 24v 1
735-114 Rocker with Suction Fan Decal 1
7 48-83 Joystick - Forward/Neutral/Reverse 1

48-85 Contact 2

VT & VS - Parts
Channel Brush Speed Control
10
5
6
11
1
8,9
95CN. 005-2
BoM 950322
3730-1 Flow Control Valve comprising: 1

1 26106-1 Body 1
2 26107-1 Spindle 1
3 26108-1 Gland 1
4 79-52 ‘O’ Ring 2
5 41045-2 Handwheel 1
6 135-9 Grubscrew M6c x 8 1
7 410-18 Nut - Mounting 3/4" 1
8 265-2 Adaptor - Reducing 3/8" x 1/4" BSP 1
9 451-17 Washer - Sealing 1/4" BSP 1
10 - Label 2:12 on Decals Chapter 34 -

11 450-16 Washer - Plain, for mounting valve 2

VT & VS - Parts
Powasave Pressure Control - Option
3
5
4
3 2
1
3
4
FROM
SUPPLY 95PC. 009-2
KT00395
282627 Regulator Assembly comprising items 1 to 3:
1 72-14 Regulator 1
2 72-15 Panel Nut 1
3 538-3 Swivel Elbow 1/8" x Ø6 2
4 273-21 Tube - Red Ø6 12m
*5 283648-12 Powasave Control Valve Assembly - 12v 1

283648-24 Powasave Control Valve Assembly - 24v 1
Notes

VT & VS - Parts
Dual Steer Changeover Control
3 2 1
95CN.008
4
KT 10095
808013-1 Power Switch Assembly Comprising:-
1 808014-1 Blank - Cab Facia 1

2 48-88 Rocker Switch 1
3 48-111 Lens Insert 1
4 808045-1 Label 1
Notes

VT & VS - Parts

VT & VS - Parts
CHAPTER 33
Chassis Application
Table of Contents
Section Page
Introduction
Chassis Related Parts 33 : 2
Components
Weight Load Indicator - Steel Suspension 33 : 3
Weight Load Indicator - Air Suspension 33 : 5
Fuel Tank Access Ladder 33 : 6
VS Hydrodrive
Clutch Safety Switch Installation 33 : 8
Page Issue 01 Chapter - Chassis Application 33:1

VT & VS - Parts
Chassis Related Parts
The items listed below vary depending on what chassis the Johnston sweeper equipment is mounted to.
If any parts for these areas are required, contact the Johnston Parts Department quoting the machine
serial number shown on the plate fitted to the subframe crossmember below the body rear door.
Batteries and battery mounting

Cab - Sweep control installations (Chapters 24 and 32)
Cab - single and dual steer parts
Body discharge interlock
Rear mounted fuel tank
Gutter and wide sweep brush water spraybar mountings (Chapters 24 and 26)
Supawash hose reel and front bumper spraybar mountings (Chapter 30.SW)
Rear underrun bumper
Rear mudguards and mudflaps
Subframe to chassis mounts
Work lights (Chapter 31)
Channel brush pivot frame support posts (Chapter 24)
Channel brush hydraulic hoses 75 and 84 (Chapter 24)
Wide sweep brush hydraulic hoses 70 to 74 (Chapter 26)
Customer options i.e. autolube, special beacons, reversing camera, handwash etc.
Chassis Specification Sheets plus Drawing Lists covering the above components are as follows:
Chassis Chassis Spec. No. Chassis Matrix List No.

*T *S *T *S
DAF FA LF45 12 Tonne C201 - CM202 -

DAF FA LF55 15 Tonne C203 C103 CM203 CM103
IVECO ML 130E 13 Tonne Tector C209 - CM209 -

IVECO ML 120E 12 Tonne Tector C212 C112 CM212 CM112
MAN 15.225 LK 15 Tonne C216 C116 CM216 CM116
MERCEDES ATEGO 10.5 Tonne, KO C219 - CM219 -

MERCEDES ATEGO 13.5 Tonne, LKO C220 - CM220 -
MERCEDES ATEGO 15 Tonne, LKO C221 - CM221 -
MERCEDES ATEGO 18 Tonne, K C222 C122 CM222 CM122
RENAULT MIDLUM 220-12 ‘Balayeuse’ C223 C123 CM223 CM123

RENAULT MIDLUM 220-14 ‘Balayeuse’ C224 - CM224 -
RENAULT MIDLUM 220-15 ‘Balayeuse’ C225 C125 CM225 CM125
SCANIA P94DB NZ C227 - CM227 -
VOLVO FLH 15 Tonne C228 - CM228 -

VOLVO FLE 18 Tonne C229 - CM229 -
33:2 Chapter - Chassis Application Page Issue 01

VT & VS - Parts
Weight Load Indicator - Steel Suspension Chassis
10 5 7 12
13
2
14
18
19
15
9 17
4
6 5
11 8 5 3 15
19
16
95CA. 001
20,21
Chassis Matrix - Various
807336-1 Load Indicator - Short, comprising items 1 and 20

807336-2 Load Indicator - Long, comprising items 1 and 21
1 20724-1 Weight Load Indicator Assembly comprising items 2 to 19
2 281745-1 Arm 1
3 281739-1 Stop Plate 1
4 281738-1 Support Bracket 1
5 124-103 Screw M6 x 20 5
420-13 Nut M6 5
6 281742-1 Pin 1
500-70 Split Pin 2
7 6275-1 Spring 1
8 20723-1 Support Link 1
9 20722-1 Support Bracket 1
10 124-105 Screw M6 x 25 2
420-13 Nut M6 2
12 124-113 Screw M6 x 50 1
420-13 Nut M6 2

VT & VS - Parts
Weight Load Indicator Switch - Steel Suspension Chassis
13 124-113 Setscrew M6c x 50 1

14 410-27 Nut - M6c x 50 2
16 425-13 Nut - Nyloc M6c 1
> 17 17369 Insulator - Nylon Tube 1
18 50-43 Ring Terminal 1
20 6369-1 Contact Bracket - Short

21 6369-9 Contact Bracket - Long
Notes

VT & VS - Parts
Weight Load Indicator Switch - Air Suspension Chassis
5 2
95CA. 003-2
802780-2 Air Switch Assembly comprising:
1 802779-1 Air Switch Block 1

2 4505-469 Elbow x Ø8 Tube 1
3 72-52 Air Pressure Switch 1
4 263-2 Adaptor 1/4” BSP 1
5 54-12 Collar Plug 1

6 277-54 Equal Tee x Ø8 Tube 1
7 39394 Air Brake Tube As Req’d

VT & VS - Parts
Access Ladder and Valance Installation
BOLTS MUST BE FITTED IN

4 THE DIRECTION SHOWN
13
5
6
3 12
7
2
8
10
9
3
11
1 95CA. 005
282440 Ladder Installation Drawing
1 282561-1 Access Ladder 1

2 283657-1 Stay 2
425-14 Nut - Nyloc M8 4
425-14 Nut - Nyloc M8 2

VT & VS - Parts
Access Ladder and Valance Installation
5 283650-1 Mount 1
6 135-29 Screw - Self Locking M10 x 25 3
7 124-168 Screw M10 x 22 2
8 283655-1 Valance 1
9 283658-1 Bracket 1
10 124-203 Screw M12 x 30 2
11 124-135 Screw M8 x 20 2
12 124-136 Screw M8 x 22 2
13 Fuel Tank - See Chapter 22
Notes

VS - Parts
VS Clutch Switch Safety Feature
PEDAL BOX
3
2
1
TYPICAL INSTALLATIONS
95CN. 009
3
2
1
*1 48-149 Sensor Switch 1

*2 457-6 Washer - Plain Ø12 2
*3 410-33 Lock Nut 1
Note
* These parts are chassis related. Contact the Johnston Parts Department, quoting the machine
serial number, for further information.
The above parts are not supplied with standard ESU’s.


VT & VS - Parts
CHAPTER 34
Miscellaneous
Table of Contents
Section Page
Decals - VT Only 34 : 2
Decals - VS Only 34 : 4
Lubricants and Tool Kit 34 : 6
Page Issue 01 Chapter - Miscellaneous 34:1

VT - Parts
Decals - VT Only
34:2 Chapter - Miscellaneous Page Issue 02

VT - Parts
Decals - VT Only
BoM 951811

VS - Parts
Decals - VS Only

VS - Parts
Decals - VS Only
BoM 951811

VT & VS - Parts
Lubricants
Part No. Description Quantity
39671 Vitaliser Fluid Top Up Bottle

39672-5 Hydraulic Oil 5 Litre Can
39673-5 Fluid Flywheel Oil 5 Litre Can
39675-5 Automatic Transmission and Power Steering Fluid 5 Litre Can
39676-5 Engine Oil 5 Litre Can
39677-5 Gearbox Oil 5 Litre Can
39678-5 Antifreeze 5 Litre Can
Tool Kit - KT03995
95MS. 005

282499-1 Tool Kit
Fan Scraper - Option
95MS.009
Suction Fan Scraper Pt. No. 283665-1 for cleaning debris from underside of blades to prevent
vibration. See Operator’s Guide, Chapter 6, Routine Maintenance, Suction Fan Impeller and
Casing.

VT & VS - Parts
CHAPTER 35
Optional Equipment
Table of Contents
Section Page
Ancillary Equipment
Handwash Unit 35.AE : 1
CCTV Cameras 35.AE : 5
Water Hydrant Kit 35.AE : 9
Rear LED Warning Lights 35.AE : 11
Body
Top Mounted Access Door 35.BD : 1
Heavy Duty Intake Components 35.BD : 3
Contractors Rear Door 35.BD : 5
Sweep Gear
Varagap Nozzle 35.SG : 1
Full Width Nozzles 35.SG : 5
Wanderhose Lo-Level Water Injection 35.SG : 15
Heavy Duty Nozzle Carriage Components 35.SG : 19
Rear Mounted Wanderhose 35.SG : 21
Wanderhose Gulley Pack 35.SG : 29
Combivak Nozzle 35.SG : 33
Water System
Microtrap Spray System 35.WS : 1
Water Recirculation System 35.WS : 5
> Auxiliary Water Tank 35.WS : 11
> Pump Low Water By-pass Valve 35.WS : 21
Page Issue 09 Chapter - Optional Equipment 35:1

VT & VS - Parts
35:2 Chapter - Optional Equipment Page Issue 01

VT & VS Parts
35.AE
Ancillary Equipment - Handwash Unit
Table of Contents
Section Page
Handwash Unit 35.AE : 2
Page Issue 01 Chapter - Optional Equipment 35. AE:1

VT & VS Parts
Handwash Unit
4
1
LED VIEWING
WINDOW
5
3
20A
In the event of no water the lockout will operate

and the telltale LED will flash. After refilling with
water the unit must be reset. Remove the fuse
and after one minute replace it, the unit will reset
and the red indicator will light up.
5
7
BK
R
CONNECTIONS MADE TO
EMERGENCY DISCHARGE
PUMP UNDER SUBFRAME
CROSSMEMBER
6
95OP.007-4
35. AE:2 Chapter - Optional Equipment Page Issue 01

VT & VS - Parts
Handwash Unit
BoM KT04095
807350-1 Handwash - L.H. Installation
1 222-93 Handwash Unit - 24V 1
2 283779-1 Bracket 1
3 124-135 Screw M8 x 20 2
425-14 Nut - Nyloc M8 2
4 138-125 Screw - Button Hd. M8 x 25 2

425-14 Nut - Nyloc M8 2
5 293763-1 Handwash Loom 1

6 - Pump Cable - Red ) See Emergency Discharge
7 - Pump Cable - Black ) Pump - Chapter 28
8 - Valance - See Chapter 33, Access Ladder and Valance

Installation.
Notes

VT & VS - Parts
AE:4 Chapter - Optional Equipment Page Issue 01

VT & VS Parts
35.AE
Ancillary Equipment - CCTV Cameras
Table of Contents
Section Page
Camera/Monitor Kits and Camera Installations 35.AE : 6

Monitor Installation 35.AE : 7

VT & VS Parts
Camera/Monitor Kits and Camera Installations
Ultra Low Light Colour Camera and

High Definition Flat Screen Monitor Kits:
657-1 One Camera and one 5.6” Monitor

> 657-2 Two Cameras and one 5.6” Monitor
657-31 One Camera and one 7.0” Monitor
657-32 Two Cameras and one 7.0” Monitor
655-33 Three Cameras and one Quad Split Screen Monitor
BoM KT03795 Rear Side
* 1 - Camera 1 1
657-15 Camera Lead x 15m As Required
657-23 Camera Lead x 23m As Required
2 124-103 Screw M6 x 20 4 2
420-13 Nut - Nyloc M6 4 2
3 283438-1 Mount 1 -
4 124-132 Screw M8 x 12 1 -
460-10 Washer - Spring 1 -
> 5 284019-1 Camera/Worklight Bracket - 1

6 124-103 Screw M6 x 20 - 2
420-13 Nut - Nyloc M6 - 2
* Quote the machine serial number and the camera system fitted (if known) when
ordering replacement parts.

VT & VS Parts
Monitor Installation
3
1
8
9
6
5
4
2
95OP. 005-6
BoM KT03795
809390-2 Monitor Installation
*1 - 5.6” or 7.0” Monitor with Power Leads
2 807229-1 Pedestal 1
3 809387-1 Monitor Post 1
4 220-251 Cross Clamp 16mm 1
5 124-144 Screw M8 x 45 1
56569-8 Spacer 1
6 129-93 Screw - Cap Head M6 x 16 2
425-13 Nut - Nyloc M6 2
7 809389-1 Monitor Mount 1

8 124-134 Screw M8 x 16 1
460-10 Washer Spring Ø8 1
460-3 Washer Spring Ø3 2
* Quote the machine serial number and the camera system fitted (if known) when
ordering replacement parts.

VT & VS Parts

VT & VS Parts
35.AE
Ancillary Equipment - Water Hydrant Kit
Table of Contents
Section Page
Water Hydrant Kit 35.AE : 10

VT & VS Parts
Water Hydrant Kit
2 95OP.006
BoM KT04095
1 72688-1 Standpipe Assembly - UK 1

72688-2 Standpipe Assembly - German 1
72688-11 Standpipe Assembly - Belfast 1
2 72689-6 Hose Assembly - 2 1/2” Instantanious Coupling (UK only) 1

3 72689-1 Hose Assembly - Stortz Coupling (66mm between lugs) 1
4 667-6 Key Poker 1

VT & VS Parts
35.AE
Ancillary Equipment - LED Warning Lights
Table of Contents
Section Page
Rear LED Warning Light Installation 35.AE : 12
Page Issue 06 Chapter - Optional Equipment 35.AE:11

VT & VS Parts
Rear LED Warning Light Installation
8
9
2
10
4
11
3
1
5
6
14
6
13
17 17
15
12
18 16
6 19 6
95OP.016

VT & VS Parts
Rear LED Warning Light Installation
BoM KT01295
284117-2 LED Warning Light Installation comprising items 1 to 16:-
284116-1 LED/ Enclosure comprising items 1 and 2:- 1

1 284120-1 Control Module 1
134-41 Screw - Pan Head M4 x 10 4
425-11 Nut - Nyloc M4 4

4 124-136 Screw M8 x 22 4
425-14 Nut - Nyloc M8 4
5 124-101 Screw M6 x 14 4
425-13 Nut - Nyloc M6 4
6 284118-1 LED/ Bracket Assembly comprising items 7 to 11:- 4

7 284111 Bracket 1
8 745-5 LED Directional Beacon - Amber 1
425-12 Nut - Nyloc M5 4
10 86-11 Cable Gland 1
11 700-93 Locknut M16 1
12 282975-1 Base Plate 2

13 124-135 Screw M8 x 20 4
14 124-135 Screw M8 x 20 4
15 455-10 Washer - Plain Ø8 4
425-14 Nut - Nyloc M8 4
16 124-135 Screw M8 x 20 4
17 - LED Cables Routed Behind the Options Frame

18 20674-3 Rear Marker Boards - UK only
19 - Options Frame - See Chapter 27
Page Issue 06 Chapter - Optional Equipment 35.AE:13

VT & VS Parts

VT & VS Parts
35.BD
Body - Roof Mounted Access Door
Table of Contents
Section Page
Roof Mounted Access Door 35.BD : 2
Page Issue 03 Chapter - Optional Equipment 35. BD:1

VT & VS Parts
Roof Mounted Access Door
BoM KTO3095
283595-2 Roof Access Door Assembly comprising items 1 to 3
1 - Access Door Assembly - As Standard Door

See Body Common Parts (1) - Chapter 20
2 123-148 Bolt M12 x 50 2

425-16 Nut - Nyloc M12 2
3 283596-2 Frame 1
4 124-137 Screw M8 x 25 10
35. BD:2 Chapter - Optional Equipment Page Issue 01

VT & VS Parts
35.BD
Body - Heavy Duty Intake Components
Table of Contents
Section Page
Heavy Duty Intake Components 35.BD : 4

VT & VS Parts
Heavy Duty Intake Components
KT05395, 05396

Single Dual
1 280694-50 Intake Duct - Rubber Lined, V500, 605, 650 1 2

> 296031-2 Intake Duct - Rubber Lined, V800 1 2
2 281190-6 L.H. Heavy Duty Wear Plate - Lo-Top 1 2
281190-5 R.H. Heavy Duty Wear Plate - Lo-Top 1 2
61102-2 L.H. and R.H. Heavy Duty Wear Plate V650, V800 1 2
KT05295
3 94990-11 Intake Seat - Rubber Lined -

0.8 to 0.99m Chassis Height 1 2
94990-13 Intake Seat - Rubber Lined
1.0 to 1.099m Chassis Height 1 2
Notes
Installation hardware and components as standard parts.
35. BD:4 Chapter - Optional Equipment Page Issue 03

VT & VS Parts
35.BD
Body - Contractors Rear Door
Table of Contents
Section Page
Contractors Rear Door 35.BD : 6

VT & VS Parts
Contractors Rear Door
1
BASIC DOOR
3
10
9
11
12
2
13
14
7 5 8 6
3 OPTIONS
15
16
22
20
19
21
6
25
18
26 17
ARROW DENOTES
23 DIRECTION OF FLOW
24 95OP.015-3
35.BD:6 Chapter - Optional Equipment Page Issue 08

VT & VS Parts
BoM 950811
283930-2 Contractors Rear Door - Chrome Steel (4003) ) Comprising

283930-3 Contractors Rear Door - Stainless Steel (316) ) items 1 to 8
1 283871-2 Door - Chrome Steel (4003) -

283871-3 Door - Stainless Steel (316) -
Hinge Bushes and Door Seal as standard door in
chapter 20.
> 2 280528-2 Access Panel - Chrome Steel (4003) 1
280528-3 Access Panel - Stainless Steel (316) 1
3 283613-1 Gasket 1
> 5 283862-2 Blanking Plate - Chrome Steel (4003) 1

283862-3 Blanking Plate - Stainless Steel (316) 1
6 283865-1 Gasket 1
Options
9 281452-1 Drain Spigot 2

10 281411-1 Gasket 2
451-82 Washer - Brass 6
13 9983 Layflat Hose x 1.6m 1
14 9983 Layflat Hose x 1.0m 1
15 283595-2 Roof / Rear Access Door Assembly - See page 35.BD:1 1

17 283879-1 Extension Tube 1

19 88-45 Iris Valve 1

20 88-48 Iris Valve Liner 1
21 283866-1 Gasket 1
22 124-137 Screw M8 x 25 3
> 460-10 Washer - Spring M8 3
23 124-137 Screw M8 x 25 2

VT & VS Parts
BoM 950811
24 283864-1 Chute 1
25 124-137 Screw M8 x 25 3
26 123-119 Screw M8 x 95 3
Notes
35.BD:8 Chapter - Optional Equipment Page Issue 08

VT & VS - Parts
35.SG
Sweep Gear - Varagap Nozzle
Table of Contents
Section Page
Varagap Installation 35.SG : 2
Page Issue 01 Chapter - Optional Equipment 35. SG:1

VT & VS - Parts
Varagap Nozzle Installation
PNEUMATIC VALVE ISLAND

CONNECTIONS L.H. AND R.H. SWEEP
L.H.
R.H.
3 4
2
95NZ. 004-10
DUAL SWEEP INSTALLATION SHOWN
35. SG:2 Chapter - Optional Equipment Page Issue 09

VT & VS - Parts
Varagap Nozzle Installation
BoM KT 07895

Dual Sweep
1 554-3 Tee Adaptor - Dual Sweep Only 2

2 273-20 Pneumatic Pipe Ø6 Blue 18m
3 41041-1 Restrictor Ø6 Pipe 4
BoM 951113
4 290002-1 Varagap Cylinder 2
Notes
For Varagap Joystick Control see Switch Panel chapter 32
For Varagap Cylinder Seal Kit see chapter 29
Refer to Electrical Diagram SE574z02 in chapter 9
Refer to Pneumatic Diagram SP547a02 in chapter 11

VT & VS - Parts

VT & VS Parts
35.SG
Sweep Gear - Full Width Nozzles
Table of Contents
Section Page
Nozzle Assemblies
‘Wide Mouth’ Nozzle (Maxigap/Varagap) 35.SG : 6
‘Narrow Mouth’ Chipping Nozzle 35.SG : 8
‘Narrow Mouth’ Fluid Recovery Nozzle 35.SG : 10
Carriage
> Carriage and Cradle Assemblies 35.SG : 12

VT & VS Parts
Full Width ‘Wide Mouth’ Nozzle
19 20 24
23
29 28 5 4 3 1
7
2
6
4
5
22
25 26 27
19
24 20 21
L.H. ASSEMBLY SHOWN
16 (R.H. IS MIRROR IMAGE)
1713
Both hands are assembled from common
14 parts and handed on assembly - there are
no LH and RH assembly part numbers.
11
15 10
9 95NZ. 005
10
12
BoM KT08995

per Nozzle
* 283480-1 Full Width ‘Wide Mouth’ Nozzle Assembly comprising:-

1 283460-1 Nozzle - ‘Wide Mouth’ 1
3 281751-1 Pivot Arm 1
4 283363-1 Pivot Bolt 2
455-16 Washer Plain M20 2
425-20 Nut - Nyloc M20 2

VT & VS Parts
Full Width ‘Wide Mouth’ Nozzle

per Nozzle
5 124-175 Screw M10c x 40 4

425-15 Nut - Nyloc M10 4
6 124-198 Screw M12 x 16 4

7 124-203 Screw M12 x 30 1
8 62353 Link 1
> 9 40755-2 Water Jet - M12 3

10 453-1 Washer - Fibre (Red) 9
11 26997-1 Banjo Body 3
12 418-12 Dome Nut M12 3

14 46382-3 Adaptor - Hose 1
15 90696-1 Tee Piece 1
16 39444 Water Hose 3/8” Bore x 3m 1
18 281755-1 Plug 1
410-57 Back Nut G 3/4” 1
19 283471-1 Front / Rear Curtain 2

20 283474-1 Curtain Retainer 2
21 283479-2 Leading Shoe 1

22 283478-2 Deflector 1
23 283494-1 Trailing Curtain Support 1
24 119-128 Bolt M10 x 40 Stainless Steel 14
25 283473-1 Side Curtain 1

26 283475-1 Curtain Retainer - Side 1
417-10 Nut - Nyloc M10 Stainless Steel 2
28 283537-1 Guide 1
29 138-156 Button Head Screw M10 x 25 2
425-15 Nut - Nyloc M10 2
Note
* This assembly is part of Carriage Assemblies 283497-1 and 283498-1 shown on page 35.SG:13

VT & VS Parts
Full Width Chipping Nozzle
21 19 20
5 4 3 1
25
26
2
6
6 4
5
24
16 23
22
25
18
19 17
20 L.H. ASSEMBLY SHOWN
(R.H. IS MIRROR IMAGE)
14 parts and handed on assembly - there are
15 11 no LH and RH assembly part numbers.
12
13 8
7
8 95NZ. 005-2
10

VT & VS Parts
Full Width Chipping Nozzle
BoM KT08995
Item No. Part No. Description Quantity per Nozzle
* 283490-1 Full Width ‘Chipping Nozzle’ Assembly comprising:-
1 283470-1 Nozzle - Narrow Mouth 1

3 281751-1 Pivot Arm 1
4 283363-1 Pivot Bolt 2
425-20 Nut - Nyloc M20 2
5 124-175 Screw M10c x 40 4
425-15 Nut - Nyloc M10 4
6 124-198 Screw M12 x 16 4

> 7 40755-2 Water Jet - M12 3

9 26997-1 Banjo Body 3
10 418-12 Dome Nut M12 3

13 62736-1 Tee Piece 1
16 281755-1 Plug 1
410-57 Back Nut G 3/4” 1

18 283478-2 Deflector 1
21 283477-2 Trailing Shoe 1

22 40815-1 Clamp Strip 1
23 40823-1 Rubber 1
24 454-8 Washer - Plain M8 Stainless Steel 6
25 283538-1 Guide 1
425-15 Nut - Nyloc M10 4
Note:
* This assembly is part of Carriage Assembly 283500-1 shown on page 35.SG:13

VT & VS Parts
Full Width Fluid Recovery Nozzle
19 21 22
20
5 4 3 1
23
24
6
6 4
5
16
18 25
26
19 27
17
21
22
L.H. ASSEMBLY SHOWN
14 (R.H. IS MIRROR IMAGE)
15 11
parts and handed on assembly - there are
12 no LH and RH assembly part numbers.
13 8
7 95NZ. 005-3
8
10

VT & VS Parts
Full Width Fluid Recovery Nozzle
BoM KT08995
* 283490-2 Full Width ‘Fluid Recovery’ Nozzle Assembly comprising:-
1 283470-1 Nozzle - Narrow Mouth 1

3 281751-1 Pivot Arm 1
4 283363-1 Pivot Bolt 2
425-20 Nut - Nyloc M20 2
5 124-175 Screw M10c x 40 4
425-15 Nut - Nyloc M10 4
6 124=198 Screw M12 x 16 4

> 7 40755-2 Water Jet - M12 3

9 26997-1 Banjo Body 3
10 418-12 Dome Nut M12 3

13 90696-1 Tee Piece 1
16 281755-1 Plug 1
410-57 Back Nut G 3/4” 1

18 283478-2 Deflector 1
19 283471-1 Front / Rear Curtain 2
20 283494-1 Rear Curtain Support 1
23 283538-1 Guide 1
425-15 Nut - Nyloc M10 2
25 283472-1 Side Curtain 1

26 282476-1 Curtain Retainer - Side 1
Note:
* This assembly is part of Carriage Assembly 283500-1 shown on page 35.SG:13

VT & VS Parts
Full Width Nozzle Carriage
6,7
12
11
12
17
19 21,22
20
18
23 15
13
29 27
3 30
15 28
24
25 2,10
26
5
14
1,8,9
16
4
R.H. ASSEMBLY SHOWN
(L.H. IS MIRROR IMAGE) 95NZ. 006-2
Both hands are assembled from common parts and handed on assembly.
There are no L.H. and R.H. assembly part numbers.

VT & VS Parts
BoM KT08995

Maxigap Varagap
283497-1 ‘Wide Mouth’ Carriage Assembly 3 -

283498-1 ‘Wide Mouth’ Carriage Assembly - 3
Assemblies comprise items 1 to 7:-
1 283480-1 ‘Wide Mouth’ Nozzle Assembly - See page SG:6 1 1

2 283491-1 Cradle Assembly - See items 13 to 30 1 1
3 282968-1 Adjuster Link 1 1
283493-1 Link Arm Assembly comprising items 4 and 5

4 283489-1 Link Arm 1 1
5 16-10 Rod End 2 2
421-18 Lock Nut M16 2 2
6 290001-1 Maxigap Cylinder 1 -

7 290001-2 Varagap Cylinder - 1
Fluid Chipping
Recovery Nozzle
283499-1 ‘Narrow Mouth’ Carriage Assembly 3 -

283500-1 ‘Narrow Mouth’ Carriage Assembly - 3
8 283490-2 Fluid Recovery Nozzle Assembly - See page SG:10 1 -

9 283490-1 Chipping Nozzle Assembly - See page SG:8 - 1
10 283492-1 Cradle Assembly - See items 13 to 30 1 1

11 283487-1 Tie Bar 2 2
12 123-130 Bolt M10 x 50 2 2
425-15 Nut - Nyloc M10 2 2
283493-1 Link Arm Assembly comprising items 4 and 5 above
Cradle Assemblies Maxigap/ Chipping/

Varagap Fluid
Recovery
283491-1 ‘Wide Mouth’ Cradle Assembly 3 -

283492-1 ‘Narrow Mouth’ Cradle Assembly - 3
13 283481-1 Cradle 1 1
14 283374-1 Pivot Bush 2 2
15 124-173 Screw M10 x 35 4 4
457-5 Washer - Large M10 4 4
425-15 Nut - Nyloc M10 4 4
16 63491-1 Wheel Assembly - See Chapter 25 2 2

VT & VS Parts
Item No. Part No. Description Quantity per Cradle
Maxigap/ Chipping/
Varagap Fluid
Recovery
17 283495-1 Tow Eye 1 1

18 283484-1 Tow Bar 1 1
19 123-126 Screw M10 x 35 1 1
425-15 Nut - Nyloc M10 1 1
20 123-134 Screw M10 x 70 1 1
425-15 Nut - Nyloc M10 1 1
21 280866-1 Mast - Cylinder Mount (‘Wide Mouth’ Nozzle) 1 -

22 280866-2 Mast - Tie Bar Mount (‘Narrow Mouth’ Nozzle) - 1
23 124-175 Screw M10 x 40 2 2
425-15 Nut - Nyloc M10 2 2
24 283488-1 Link Arm Anchor 2 2

25 124-139 Screw M8 x 30 4 4
425-14 Nut - Nyloc M8 4 4
26 123-184 Bolt M16 x 60 1 1

425-18 Nut - Nyloc M16 1 1
27 40405-1 Lifting Eye 1 1

28 40404-1 Clamp Washer 1 1
29 63345-1 Clamp Block 1 1
30 123-130 Bolt M10 x 50 2 2
425-15 Nut - Nyloc M10 2 2
Notes

VT & VS Parts
35.SG
Sweep Gear - Wanderhose Lo-Level
Water Injection
Table of Contents
Section Page
Wanderhose Lo-Level Water Injection 35.SG :16
Page Issue 01 Chapter - Optional Equipment 35.SG:15

VT & VS Parts
Wanderhose Lo-Level Water Injection
2 3 5
* *
*
*
*
*
* *
*
2
4
4 3 8 1
7
10
9 6 9
95WH. 011
* These items are used on standard Top Mounted and optional Powaboom Wanderhoses
shown in chapter 27.

VT & VS Parts
Wanderhose Lo-Level Water Injection
KT00895
283534-6 Lo-Level Water Injection Installation 150 dia. Boom

283534-8 Lo-Level Water Injection Installation 200 dia. Boom
1 6003-10 Coupling Assembly 150 dia. 1

6003-80 Coupling Assembly 200 dia. 1
2 39444 Hose 3/8” x 2.6m 1
3 501-1 Hose Clip 2
4 24-10 Cable Tie 3
5 277-254 Tee 1
6 26997-1 Banjo 1
> 8 40755-2 Water Jet 1
9 453-1 Washer - Fibre 3
10 418-12 Domed Nut M12 1
Notes

VT & VS Parts

VT & VS Parts
35.SG
Sweep Gear - Heavy Duty
Nozzle Carriage Components
Table of Contents
Section Page
Heavy Duty Nozzle Carriage 35.SG : 20

VT & VS Parts
Heavy Duty Carriage Components
7 1 9
6
3
4
2 14 13 12 15
10 16 16
8 5
95NZ.007-2
11
KT08595

Per Wheel
283358-1 Heavy Duty Wheel Assembly comprising items 1 to11:-
1 283353-1 Axle 1
2 9114-2 Special Washer 1
3 425-18 Nut - Nyloc M16 1
4 38-30 Grease Nipple - Straight M6 3
5 283354-1 Spacer 1
6 283356-1 Labyrinth 1
8 283355-1 Hub 1
9 283357-1 Flange 1
10 124-102 Screw M6 x 16 6
11 44122-2 Tyre 10” 1
283450-1 Brace Assembly - Standard )

comprising items 12 to16:-
283450-2 Brace Assembly - Wide )
12 283449-1 Brace Bar - Standard 1

283448-1 Brace Bar - Wide 1
13 124-137 Screw M8 x 25 6
425-14 Nut - Nyloc M8 6
14 283364-1 Brace End - L.H. 1
15 283364-1 Brace End - R.H. 1
16 124-135 Screw M8 x 20 4
425-14 Nut - Nyloc M8 4

VT & VS Parts
35.SG
Sweep Gear - Rear Mounted Wanderhose
Table of Contents
Section Page
Rear Mounted Wanderhose 35.SG : 22

Pneumatic Controls 35.SG : 26
Looms 35.SG : 28

VT & VS Parts
Rear Mounted Wanderhose
11 8
7 4 3
12
10
13 5
13 6
12
2
14 4
9
10 1
15
24
16
22 23 25
41
17
19 20 40
43 21 29
30
18
26 36
27
28 42
38 39 37 35
31 34
95WH. 012-2
33
32

VT & VS Parts
BoM KT05695
283756-1 Wanderhose Installation Drawing
1 280360-1 Baffle 1
283755-1 Pivot Assembly comprising items 5 to 14:
5 283745-1 Pivot Bracket 1

7 283751-2 Pivot Pin 1

8 124-103 Screw M6 x 20 1
9 283740-1 Pivot 1
10 29128-1 Bush 5
11 283738-1 Arm 1
12 283751-1 Pivot Pin 2
13 124-102 Screw M6 x 16 2
14 200355-1 Cylinder - Pnueumatic 1
15 283759-1 Mount - Fitted on top of standard blanking plate if 1

Mesh Shaker option is not fitted, see chapter 20
118-135 Screw M8 x 20 - Stainless Steel 4
16 283760-1 Stowage Hook 1
118-201 Screw M12 x 25 4
425-16 Nut - Nyloc M12 4
290-43 Rubber Buffer 1
17 221771-1 Trunking Ø200 1

* 18 6003-8 Coupling Ø200 1
19 282638-2 Cable Support 1
20 123-114 Bolt M8 x 70 1
425-14 Nut M8 1
21 93863-1 Hose Support Clamp 1

22 93865-1 Spigot and Chain 1

VT & VS Parts
11 8
7 4 3
12
10
13 5
13 6
12
2
14 4
9
10 1
15
24
16
22 23 25
41
17
19 20 40
43 21 29
30
18
26 36
27
28 42
38 39 37 35
31 34
95WH. 012-2
33
32

VT & VS Parts
23 123-110 Bolt M8 x 50 1
425-14 Nut - Nyloc M8 1
> 24 284-21 Carbine Hook 1
25 282504-1 Hook - includes plastic plug 220-65 1

124-137 Screw M8 x 25 2
425-14 Nut - Nyloc M8 1
* 26 42738-1 Anchor 1
124-167 Screw M10 x 20 ) Anchor to 2
460-11 Washer- Spring Ø10 ) Bracket 2
27 42463-1 Anchor Bracket 1
124-135 Screw M8 x 20 ) 2
Bracket
455-10 Washer - Plain Ø8 ) 2
to Plate
425-14 Nut - Nyloc M8 ) 2
28 283899-1 Plate 1
124-135 Screw M8 x 20 ) 2
Plate to
455-10 Washer - Plain Ø8 ) 2
Options Frame
425-14 Nut - Nyloc M8 ) 2
29 221830-1 Hose Tray 1

30 123-113 Bolt M8 x 65 4
282438-41 Spacer 4
457-4 Washer - Plain Large Ø8 4
425-14 Nut - Nyloc M8 4
31 282879-1 Plunger 4
> 32 23-21 Knob 4
33 285-27 Spring 4
34 457-5 Washer - Plain Large 4
35 15917-1 Trunking Ø200 1

36 5996-4 Coupling 1
37 504-52 Hose Clip 1
38 15899-1 Hose End Fitting 1
39 15920-1 Handle 1
40 282890-3 Extension x 1250 long - Includes spring clips 6216-1 1
41 - Options Frame - See chapter 27

42 - Pneumatic Controls - See over page
43 - Looms - See elsewhere in this section
Notes
* Refer to Standard Wanderhose in chapter 27 for a more detailed description of these items.

VT & VS Parts
Pneumatic Controls
20
17
1
15
10
6
2
3
7 4
WANDERHOSE
CYLINDER
20 17
14
13
20
12
16 11
15
21
14
2 2 2 2 3
4 4 4 4 5
13
VM10 VALVE
PORT 1
8
9
13
13
19 18 95WH. 014

VT & VS Parts
Pneumatic Controls
BoM KT07595
283835-12 Pneumatic Control Assembly 12v

283835-24 Pneumatic Control Assembly 24v
1 282522-1 Box 1
2 283833-1 Plate - Valve Mounting 1
3 129-42 Bolt - Socket Head M4 x 35 2
425-11 Nut - Nyloc M4 2
4 124-135 Screw M8 x 20 2
425-14 Nut - Nyloc M8 2
5 72-14 Mini Regulator 1

6 72-15 Panel Ring 1
7 288-28 Grommet - Blind 1
8 40602-2 Valve Block 1

9 72-20 Air Silencer 1
10 54-2 Collar Plug G1/4” 2
11 42300-1 Control Valve 12v (N.C.) 1
42300-3 Control Valve 24v (N.C.) 1
12 42300-2 Control Valve 12v (N.O.) 1
42300-4 Control Valve 24v (N.O.) 1
13 538-3 Elbow G1/8” x Ø6 7

14 549-3 Stem Connector 4
15 72-4 Valve - Non Return 2
16 537-8 Adaptor - Push In 1/4” BSPT x Ø8 2
17 559-6 ‘Y’ Connector 1
19 548-20 Reducing Stem Connector 1
20 273-20 Nylon Tube Ø6 Blue x 10m 1

21 273-21 Nylon Tube Ø6 Red x 20m 1
Notes

VT & VS Parts
Looms
P32
1,2
ESC(B) 283261
ESC(A)
PC BL
PB
NP 4
1a
P31 5
PR
3
PL
RT1
1b,1c RT1
1d
RT2
RT2
Iveco ‘SP’ and ‘HP’ and VT 12v Loom Assembly 282140-1

comprising items 1 and 1b VS Loom Assembly 282140-3
John Deere ‘SP’ engines. comprising items 1 and 1d
For John Deere ‘HP’
engine see item 2. VT 24v Loom Assembly 282140-2
comprising items 1 and 1c 95WH. 015-3
KT07595
1 282060-1 Remote Throttle Loom (Includes Relay Box 1a) 1

1a Relay Box - requires the addition of components 1b,1c or 1d
1b 13193 Relay 12v (28RA) - 12v VT only. 2
1c 13194 Relay 24v (28RA) - 24v VT only. 2
1d 282119-1 Shorting Link - VS only. 1
2 283140-1 Remote Throttle Loom - John Deere ‘HP’ engines 1
3 282062-1 Powaboom Loom 1

5 282061-1 Control Loom VT Series 1
282061-2 Control Loom VS Series 1

VT & VS Parts
35.SG
Wanderhose Gulley Pack
Table of Contents
Section Page
Wanderhose Gulley Pack 35.SG : 30

VT & VS Parts
7 5 8 11
6
5
4,6 15
10 16
2
11 17 14
9 15
18
12
13
95WH. 013

VT & VS Parts
BoM 951331
284031-1 Ø150 Gulley Pack Installation:-
1 48824-1 Flexible Extension 1

2 6003-1 Coupling 1
3 21216-14 Lift Cable x 1040 long 2
4 282637-3 Cable Support - with hooks 1
5 282637-4 Cable Support - without hooks 2
6 123-114 Bolt M8 x 70 3
425-14 Nut - Nyloc M8 3
7 282600-1 Gulley Extension 1
8 124-199 Screw M12 x 20 4
BoM 951332
284032-1 Ø150 Gulley Pack Extension Installation:-
9 41070-1 Cradle 1
10 41063-1 Support 1
11 124-134 Screw M8 x 16 2
420-14 Nut M8 2
12 41150-1 Extension 1
13 41067-1 Extension 1
BoM 951333
284033-1 Holster Installation:-
14 124-135 Screw M8 x 30 4
425-14 Nut - Nyloc M8 4
457-4 Washer - Large 4
15 211-38 Edge Trim 4
41061-1 Hose Guide/Clamp Assembly comprising:-
16 284061-1 Holster 1
17 41183-1 Latch 2
18 124-139 Screw M8 x 30 2
41184-1 Pivot 2
425-14 Nut - Nyloc M8 2
Notes

VT & VS Parts

VT & VS Parts
35.SG
Combivak Nozzle
Table of Contents
Section Page
Nozzle Assembly
Nozzle Assembly 35.SG : 34
Water Jets and Hoses 35.SG : 38
Brush Assembly 35.SG : 39
Nozzle Installation
Nozzle Installation 35.SG : 40
> Hydraulic Hoses and Wiring Looms

Hoses and Loom - L.H. Nozzle 35.SG : 42
Hoses and Loom - R.H. Nozzle 35.SG : 43
Hoses and Loom - Dual Nozzles 35.SG : 44
Hoses and Looms 35.SG : 45

VT & VS Parts
Combivak Nozzle Assembly
61
50
7
49 48 62 56
22
3 21
20
59,60 26
29
6
12
11 51
57
10
11 7
47
14 2
1
18
14 29 44
19 41
11 42
10 43
9
11
40 38
12 45 39
8 13 46
6
52
58 30 53
27 25 59
31 28
54
6
55
5 4
3
34
32
63
33 15
36 23 16
35 64 24 17 95NZ.008
37

VT & VS Parts
281887-1 LH Nozzle Assembly

281887-2 RH Nozzle Assembly
1 280920-2 Lined Nozzle 1

2 62882-2 Carriage 1
3 200377-1 Tow Bracket 1
4 123-158 Bolt M12c x 100mm 1
425-16 Nut M12c Nyloc 1
6 802725-1 Cheek Plate 2
7 281884-1 Actuator 1
8 62567-1 Pivot Arm 2
9 42733-1 Bush - Bearing 2
10 42733-2 Bush - Bearing 4
11 29128-1 Bush - Bearing 10
12 123-156 Bolt M12c x 90mm 4
13 123-148 Bolt M12c x 50mm 2
14 425-16 Nut M12c Nyloc 6
15 62138-1 Front Rubber 1

17 124-177 Setscrew M10c x 50mm 6
18 62170-1 Skid 1
19 124-208 Setscrew M12c x 45mm 3
20 41615-1 Rubber Curtain 1

23 62123-1 Pivot Pin 1

460-10 Spring Washer M8 1
25 62124-1 Adjuster 1
26 62167-2 Slider 1
27 62157-1 Clamp Tube 1
28 135-23 Grub Screw M6c x 10mm 1
29 281305 Handle 2
30 62828-1 Cross Beam 1

31 124-169 Setscrew M10c x 25mm 4
32 40550-1 Hydraulic Motor 1

33 42489-1 Adaptor 1

VT & VS Parts
61
50
7
49 48 62 56
22
3 21
20
59,60 26
29
6
12
11 51
57
10
11 7
47
14 2
1
18
14 29 44
19 41
11 42
10 43
9
11
40 38
12 45 39
8 13 46
6
52
58 30 53
27 25 59
31 28
54
6
55
5 4
3
34
32
63
33 15
36 23 16
35 64 24 17 95NZ.008
37

VT & VS Parts
34 263-4 Adaptor 1/2” BSP 2

451-126 Washer - Copper 1/2” BSP 2
35 71457-1 Check Valve 1
36 42490-1 Adaptor 1
37 124-208 Setscrew M12c x 45mm 2
425-16 Nut M12c 2
38 94737-1 Bearing Housing 1

39 14-47 Bearing 1
40 42490-1 Adaptor 1
41 42819-1 Bearing Support Plate 1
42 27-15 Circlip 1
43 38-1 Grease Nipple 1/8” Str. 1

44 80-94 ‘O’ Ring 1
45 77-26 Oil Seal 1
47 - Nozzle Wheel - See Chapter 25 2
48 29362-2 Cylinder 1
290001-500 Cylinder Seal Kit
49 29149-2 Clevis Pin ) 1
39624 Retaining Clip ) Spares 1
50 62098-1 Clevis Pin ) Items 1
39624 Retaining Clip ) 1
51 62135-1 Pin - Nozzle Stop 1
52 63321-1 Bracket 1
124-137 Setscrew M8c x 25mm 1
53 410-12 Black Nut 1/2” 2
54 - See ‘Hydraulic Hoses’ items 161 and 162 -

55 - See ‘Hydraulic Hoses’ items 163 and 164 -
56 62167-1 Handle 1
57 59-26 Split Pin 1
58 281755-1 Plug 2
59 410-57 Locknut 2
* 60 200493-1 Elbow 1
61 - Nozzle Trunking ) As Standard Nozzle 1

62 - Hose Clip ) See Chapter 25 1
63 - Water Spray Jets, Hoses and Fittings - See Next Page

64 - Brush Assembly - See Over Page
Notes
* Elbow, item 60, only fitted with Recirculating Water Option

VT & VS Parts
Combivak Nozzle - Water Jets and Hoses
7 13
10 9
11
12
7
1-6
6
7
5
1-6 2
7 3
4
8 1
4
7
4
95NZ. 011
1-6
1 40755-2 Water Jet 4

2 26997-1 Banjo 4
3 418-12 Domed Nut 4
4 453-1 Fibre Washer 12
7 39444 Hose 2.5m

9 88-4 Ball Valve 1

10 410-3 Locknut 3/8” BSP 1

VT & VS Parts
Combivak Nozzle - Brush Assembly
2 3
3 2 5 1 4 95NZ. 009
1 41433-5 Stock 1
2 41436-2 End Plate 2
3 131-131 Screw Csk. Soc. Hd. M8c x 40mm 8
4 15130 Brush Segment 42
5 15131 Brush Spacer 2
Notes

VT & VS Parts
Combivak Nozzle - Installation
3 1
2
54
17 6
15
13 7
14
18
16 17
9
8
11
12 9
10
7
10
95NZ. 010

VT & VS Parts
Combivak Nozzle - Installation
BoM KT06695
1 283540-1 Bracket 1
2 124-179 Screw M10 x 60 1
425-15 Nut - Nyloc M10 1
4 40269-1 Lifting Hook 2

5 40457-2 Bar 2
6 124-178 Screw M10 x 55 4
425-15 Nut - Nyloc M10 4
7 29284-2 Cylinder 2
8 62165-6 Chain 2
9 62172-1 Shackle - Stainless Steel 4
10 283542-1 Arm 1
11 283567-1 Clamping Plate 2
12 124-175 Screw M10 x 40 4
425-15 Nut - Nyloc M10 4
13 283543-1 Plate 1
14 124-213 Screw M12 x 70 2
425-16 Nut - Nyloc M12 2
15 283307-4 Spacer - Nylon 1
16 283565-12 Valve Block Assembly - 12v 1

283565-24 Valve Block Assembly - 24v 1
17 263-4 Adaptor G1/2” 4
18 124-116 Screw M6 x 65 2
425-13 Nut - Nyloc M6 2
Notes

VT & VS Parts
Hydraulic Hoses and Wiring Loom - L.H. Combivak Nozzle
SUBFRAME
LOOM
TANDEM PUMP CV
ON AUX. ENGINE CV
VT ONLY
03
101
102
165
102
101 WL1
157 165
156
159 163
T
P
161
ORIGINAL CYLINDER
ORIGINAL
FEED
ORIGINAL
VENT
95HC. 006-11

VT & VS Parts
Hydraulic Hoses and Wiring Loom - R.H. Combivak Nozzle
SUBFRAME
LOOM
TANDEM PUMP CV
ON AUX. ENGINE CV
VT ONLY
03
101
102
102
165
101 WL1
159
156
163 157
T
P
161
ORIGINAL CYLINDER
ORIGINAL
FEED
ORIGINAL
VENT
95HC. 006-12

VT & VS Parts
Hydraulic Hoses and Wiring Loom - Dual Combivak Nozzles
SUBFRAME
LOOM
TANDEM PUMP CV
ON AUX. ENGINE CV
VT ONLY
03
101
102
102
165
101 WL2
156
157 160
166
159 163 164 158
T T
P P
161 162
ORIGINAL CYLINDER
ORIGINAL CYLINDER
ORIGINAL ORIGINAL
FEED FEED
ORIGINAL ORIGINAL
VENT VENT
95HC. 006-13

VT & VS Parts
Hydraulic Hoses and Wiring Looms - Combivak Nozzle
BoM KT06695, Drg. 281887
03 - ) See chapter 22.PA/PB, Common Parts -

) ‘PTO Pump Installations’
101 - ) See chapter 28 -

102 - ) ‘Tandem/Options Pump Valve Block Installations’
156 HC08000-168 1/2” Hydraulic Hose 1



> Looms
WL1 283566-1 Combivak Loom - Single 1

WL2 283566-2 Combivak Loom - Dual 1
Notes
Hose item numbers 156 to 166 correspond with those in Hydraulic diagram
SH529z01 in Chapter 8.

VT & VS Parts

VT & VS Parts
35.WS
Water System - Microtrap Sprays
Table of Contents
Section Page
PM10 Spraybar Installation - Nozzle Draw Bar 35.WS : 2

100 Micron Spraybar Installation - C.B. Pivot Frame 35.WS : 4
Page Issue 06 Chapter - Optional Equipment 35. WS:1

VT & VS Parts
PM10 (plus Supawash) Spray Bar Installations - Nozzle Draw Bar
CHANNEL BRUSH
ATOMISING SPRAY BAR
SEE NEXT PAGE
9 7
8
6
5
3
4
100 MICRON
1 SPRAYBAR
SUPAWASH
SPRAYBAR
2
200 MICRON
SPRAYBAR
VALVE W3 = SINGLE & LH DUAL

VALVE W8 = RH DUAL
EXISTING CB WATER VALVES

IN SYSTEMS LOCKER
3,4
SUPAWASH SPRAYBAR
SEE CHAPTER 30.SW
14
TO STANDARD
NOZZLE SPRAYS
13
SEE CHAPTER 25
14
21
20 12
19
18
16
VALVE W4 = LH NOZZLE
17
VALVE W9 = RH NOZZLE
15
EXISTING NOZZLE WATER 14

VALVES IN SYSTEMS LOCKER
10
200 MICRON
95WC. 032 SPRAYBAR 11
35. WS:2 Chapter - Optional Equipment Page Issue 06

VT & VS Parts
PM10 (plus Supawash) Spray Bar Installations - Nozzle Draw Bar
BoM KT01995
283393-2 100 Micron (Atomising) Spray Bar Assembly

1 201076-1 Spray Bar 1

2 21-319 Nozzle Jet 3
3 124-148 Screw M8 x 65 2
425-14 Nut - Nyloc M8 2
4 56589-8 Spacer 2
5 88-4 Tap 1
6 277-20 Elbow - Hose Connector 1
7 39444 Hose 3/8” Bore As Req’d

8 501-1 Hose Clip 2
9 39640 ‘Y’ Connector 1
283393-3 200 Micron Spray Bar Assembly

10 63584-1 Spray Bar 1

11 263-2 Adaptor 1/4” BSP 3
60690-1 Nozzle Jet 3
60689-1 Union Nut 3
12 68-18 Blanking Cap 1

* 14 6105-1 U-Bolt M6 2
457-2 Washer - Plain Large M6 4
425-13 Nut - Nyloc M6 4
15 242-51 Elbow 3/8” BSP - Swivel 1

16 88-4 Tap 1
17 265-2 Adaptor 1/4” x 3/8” BSP 1
19 39444 Hose As Req’d

Notes
* If a Supawash Spray Bar is fitted an additional two U-bolts, items 14, will be required.
For Water Circuit diagrams see SW511b01 (Single) and SW512b011 (Dual) in Chapter 10

VT & VS Parts
100 Micron Spray Installation - Channel Brush Pivot Frame
NOZZLE ATOMISING
SPRAYBAR
SEE PREVIOUS PAGE
9
VALVE W3 = SINGLE & LH DUAL

VALVE W8 = RH DUAL
7
EXISTING CB WATER VALVES

IN SYSTEMS LOCKER
4
3 8
6
4
3
5
1
4
2
95WC. 024-2
BoM KT01995
1 201076-1 Spray Bar 1

2 21-319 Nozzle - Water Atomising 3
4 124-138 Setscrew M8 x 28 4
425-14 Nut - Nyloc M8 4
5 66-36 Adaptor G1/4” 1

6 277-20 Hose Connector Elbow R1/4” x Ø10 1
7 39444 Hose 3/8” Bore As Req’d
8 501-1 Hose Clip 1
9 - ‘Y’ Connector (See Nozzle Atomising Spraybar
on previous page)
For Water Circuit diagrams see SW511b01 (Single) and SW512b011 (Dual) in Chapter 10

VT & VS Parts
35.WS
Water System - Water Recirculation
Table of Contents
Section Page
System Components 35.WS : 6

Valve Installation 35.WS : 8

VT & VS Parts
Recirculation System Components
5
4
2
3
1
18
9 11
17
10 6
12
8
14
7 6
15 14 13
15
16
95WC.028

VT & VS Parts
Recirculation System Components
BoM KT09195

Single Dual
1 667-31 Hydrant Coupling - Stortz 1 1

186481-1 Hydrant Coupling - UK Machines only 1 1
2 42119-1 Body - Hydrant Filler Filter 1 1
3 39402 Filter Element 1 1
BoM KT05495
4 272-21 Hose ‘Lay Flat’ x 750mm long 1 1

5 501-4 Hose Clip 2 2
6 200429-1 Mounting Plate 1 1

7 124-169 Screw M10 x 25 3 3
Make and Break Seal comprising items 8 to 12

8 282751-1 Stem 1 2
9 282765-1 Seal 1 2
10 282752-1 Seal Support 1 2
11 200174-1 Wave Spring 1 2
12 27-5 Circlip 1 2
13 272-20 Hose - Clear 0.4m 0.8m

501-4 Hose Clip 2 4
14 281576-1 Support 1 2
124-135 Screw M8 x 20 1 2
425-14 Nut - Nyloc M8 1 2
BoM KT05595
15 272-20 Hose - Clear 1.5m 3.0m

501-25 Hose Clip 2 4
16 200493-1 Elbow 1 2
410-57 Locknut 2 4
17 - Valves - See next page - -

18 - Supawash Backflush System - See Supawash Section 30.SW
Notes

VT & VS Parts
Valve Installation
13 14 15
14
13
3
1
16 17
2 9
10
9
9
8 4
7
8
1
12 11
5 6 4
95WC.027

VT & VS Parts
Valve Installation
BoM KT05495

Single Dual
1 280586-2 Valve Box 1 1

2 123-129 Bolt M10 x 45 4 4
3 54-4 Plug G 1/2” Brass - Used when Supawash 1 1
Backflush is not fitted. See Chapter 30.SW
4 200402-1 Butterfly Valve - Pneumatic 1 2

5 552-3 Elbow G 1/8” x Ø6 1 2
6 72-17 Exhaust 1 2
7 200431-1 Clamp Plate 1 2
8 124-181 Screw M10 x 70 2 4
9 273-20 Tubing - Blue Ø6 10m 20m

10 547-3 Straight Connector 1 2
11 200788-1 Blanking Plate - Seals redundant port on singles 1 -

12 124-166 Screw M10 x 16 2 -
460-11 Washer - Spring M10 2 -
13 272-15 Flexible Tube x Ø50 Bore 2m 2m

14 504-6 Hose Clip 2 2
15 280581-2 Stub Tube 1 1
BoM 950611, 960611
16 282574-1 Gasket 1 1
17 118-169 Screw M10 x 25 - Stainless Steel 2 2
451-6 Washer - Sealing M10 2 2
Notes
For Pneumatic Circuit see diagram SP543a01 in Chapter 11

VT & VS Parts

VT & VS Parts
35.WS
Water System - Auxiliary Tank
Table of Contents
Section Page
Auxiliary Water Tank Assembly

Auxiliary Tank 35.WS : 12
Ladder 35.WS : 16
Valve Plate 35.WS : 18
Installation
Water Hose Layout 35.WS : 19
Wiring
Warning Light Wiring Layout 35.WS : 20
Page Issue 09 Chapter - Optional Equipment 35.WS:11

VT & VS Parts
Auxiliary Tank Assembly
1
4
9
2
5
7
15
3
14 6
13
11
12
10
18
22
19
21
20
13 27 28 25 28 26
REAR VIEW
16
17
29
95WC. 033
FRONT FRONT
RH LH
CONFIGURATION CONFIGURATION

VT & VS Parts
BoM KT09795
283000-1 Auxiliary Water Tank Assembly L.H. Export Market

283000-2 Auxiliary Water Tank Assembly L.H. U.K. Market
(Different Hydrant Couplings - See item 29)
1 283001-1 Auxiliary Tank 1

3 283023-1 Gasket 1
4 124-137 Screw M8 x 24 16
5 284040-1 Cap 1
6 40643-1 Cap Seal 1
7 283823-1 Water Break Valve 1

8 283026-1 Gasket 1
9 124-135 Screw M8 x 20 6
10 277-199 Spigoted 1 1/2” (F) Cap + Ø35 Barb 1

11 272-17 Hose Ø35 I/D x 1.0m 1
13 277-189 Blanking Cap 3/4”(F) 2
277-160 Gasket 3/4” 2
14 283039-1 Grab Rail 1

15 124-169 Screw M10 x 25 4
16 283073-1 Anti Vibration Mount 2

17 122-167 Bolt M14 x 60 6
18 - Ladder Assembly - Covered elsewhere in this section 1

19 138-158 Screw, Button Hd M10 x35 4
20 283032-1 Overflow Assembly 1

21 283062-1 Filter Assembly 1
22 6974-1 Filter Element - Spares item 1
23 80-143 ‘O’ Ring 2
24 124-135 Screw M8 x 20 8
25 277-128 Tee G1”(F) 1

26 88-26 Ball Valve 1
27 277-125 Hosetail G1” x Ø1” 1
28 277-220 ‘O’ Ring 2

VT & VS Parts
33 34
35
33 35
34
11,12
32 14,15
31
36
18,19
37
1
38
38
29
FRONT VIEW 30
40
43
42
39
20
23 41
22
24
23
21
24 95WC. 033-2
25-28

VT & VS Parts
29 - Valve Plate Assemblies - Covered elsewhere

in this section.
30 124-167 Screw M10 x 20 2

32 48-356 Switch - Float Blank 1
33 277-186 Hosetail Barb 90° 2

34 277-159 Flynut 3/4” BSP 2
35 44-55 Insert M6 2
36 15656-1131 Sight Tube 1
501-2 Hose Clip 2
37 22-7 Ball 1
38 272-20 Clear Tube Ø25 I/D 1

501-25 Hose Clip 2
39 277-138 Reducing Bush 1

40 277-262 Gasket 1
41 277-140 Spigoted 1 1/4”(F) BSP Cap + 90° Barb 1
42 272-20 Clear Tube Ø25 I/D 1
43 501-25 Hose Clip 2
Notes

VT & VS Parts
Ladder Assembly
4
3 6
7
5
6
10
8 4
9
13
8
14
16
2
11
17
11
16
18 12
17
15
LADDER FOLDED LADDER UNFOLDED
95WC. 033-4

VT & VS Parts
Ladder Assembly
BoM KT09795
283042-1 Ladder Assembly comprising items 1 to 18:-
1 283043-1 Foot Plate 1
283045-1 Upper Ladder Assembly comprising items 2 to 5:-

2 283046-1 Upper Ladder 1
3 283053-1 Pivot Stud 1
425-16 Nut - Nyloc M12 2
5 283052-1 Pivot Tube 1
6 283367-1 Hook Locator 2

7 283297-1 Hook 1
8 290-31 Anti-vibration Mount 3
9 124-99 Screw M6 x 10 1
10 124-108 Screw M6 x 32 2
11 283288-1 Stay 2
12 124-137 Screw M8 x 25 2
14 124-169 Screw M10 x 25 2
283055-1 Lower Ladder Assembly comprising items 15 to 18:-

15 283056-1 Lower Ladder 1
16 123-112 Bolt M8 x 60 2
457-4 Washer - Large Plain M8 2
17 283058-1 Pivot Spacer 2
425-16 Nut - Nyloc M8 2
Notes

VT & VS Parts
Valve Plate Assembly

7
6
5
4
3
1,2
10
9
11 8 VALVE PLATE
ASSEMBLY
1 283063-1
14
12
13 95WC. 033-3 VALVE PLATE

ASSEMBLY
2 283063-1
7
BoM KT09795
283063-1 Valve Plate Assembly - Export, with

Stortz Hydrant coupling, item 1
283063-2 Valve Plate Assembly - UK, with
Instantaneous Hydrant coupling, item 2
1 667-31 Hydrant Coupling - Stortz, 2 1/2” Female 1

2 18684-1 Hydrant Coupling - Instantaneous, 2 1/2” Female 1
3 39402 Filter Element 1
4 410-210 Backnut G 2 1/2” 1
5 42119-2 Body - Hydrant Filler 1
6 277-194 Nipple G 1 1/4” 1
7 277-140 Spigoted 1 1/4”(F) BSP Cap + 90° Barb 1
8 277-195 Tank Outlet/Bulkhead G1”(F) x G 1 1/4”(M) 1

9 277-268 Gasket 1 1/4” 1
10 277-266 Hose Tail 1
11 277-261 Elbow 90° 1
12 88-26 Ball Valve 1” BSP 1
13 277-197 Reducing Nipple G1”(M) x G 1 1/4”(M) 1
14 283064-1 Valve Plate 1

VT & VS Parts
Water Hose Layout
LOW PRESS. SUPAWASH

WATER PUMP OPTION 9
7
8
3
6
2
1
2
3
4
5
BODY WATER 4
TANK FEED
3
7,8
95WC. 033-6
BoM KT09795
809201-1 Hose Layout and Fittings
1 497-H24 Hose, 1 1/2” (Ø38) Bore 1

2 504-5 Hose Clip - Stainless Steel 2
3 277-170 Flynut G1 1/2” 3

4 277-183 Hosetail Straight Ø38 2
277-171 ‘O’ Ring 2
5 277-215 Tee G1 1/2” Male Equal 1
6 277-169 Hosetail Straight Ø25 1
277-171 ‘O’ Ring 1
7 6117 Hose, 1” (Ø25) Bore x 4.5m 1

8 504-4 Hose Clip - Stainless Steel 2
9 - Water Filter - See Chapter 30 -

VT & VS Parts
Low Water Level Warning Light Wiring
SWITCH
PANEL
4,5
3
P1 S1
S2 P3
CAMERA LOOM CAM-1

1
CONNECTION
S1
IF FITTED P3
2
CHASSIS INTERFACE
LOOM PLUG ‘CAM’ CAM
CONNECTION
WATER LEVEL
WF
FLOAT SWITCH
CONNECTION
AUXILIARY WATER TANK
95WC. 033-5
BoM KT09795
809486-1 Wiring Layout - 24v ) Comprising

809486-3 Wiring Layout - 12v ) items 1 to 5:-
1 809487-1 Loom - Cab to Tank 1

2 809488-1 Loom - Base Unit 1
3 809489-1 Loom - Switch Panel/Pedestal 1
4 735-500 Indicator Base - 24v 1

735-400 Indicator Base - 12v 1
5 735-603 Indicator Cover incorporating Tank Low/Full Decals 1
Note
Warning indicator (items 4 and 5) is mounted in any spare options position

on the switch panel.

VT & VS Parts
35.WS
Pump Low Water By-pass Valve
Table of Contents
Section Page
Installation
Pump By-pass Valve Installation 35.WS : 22

VT & VS Parts
Pump By-pass Valve Installation
R.H. SUBFRAME RAIL
5
1
4
3
1
85 235 69
7
A B
6
VT HYDRAULIC HOSE ROUTING VS HYDRAULIC HOSE ROUTING
69 69
B A B A
85 235
207
95WC. 009-9

VT & VS Parts
Pump By-pass Valve Installation
BoM KT12795
284064-1 Pump Low Water Shut Down drg. Showing items 1 to 5
1 284065-12 Low Water Shut Down Loom 12v 1

284065-24 Low Water Shut Down Loom 24v 1
2 134-40 Screw M4 x 8 Pan Hd. Pozidrive 2

4 124-41 Screw M4 x 25 2
5 282056-1 Mounting Plate Clamp 1
6 241-299 By-pass Solenoid Valve Manifold - 12v 1

241-300 By-pass Solenoid Valve Manifold - 24v 1
7 263-4 Adaptor 1/2” 2
† 69,85 - Hydraulic Hoses - As standard pump installation in chapter 30
Notes
† Hose item numbers correspond with those in hydraulic diagrams SH522z01, SH523z01
and SH534z01 in Chapter 8 of the Maintenance Section.

VT & VS Parts

VT650

Uploaded by

Copyright:

Available Formats

VT650

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

VT650

Uploaded by

Copyright:

Available Formats

Page Issue Levels P

VT* & VS Hydraulics 28

E.C.N. Issue - C/24694 Print date - 14.01.09

About this section

Chassis Related Parts

Batteries and battery mounting

F1 Foreword Page Issue 09

Section Revision Level 09 Page Issue Levels P1

Page Issue Changed Page Issue Changed

Front Sheet 09 C Foreword 1 09 C

P Chapter - Page Issue Levels

20 Chapter - Body/Rear Door/Cowl

21 Chapter - Subframe/Body Prop

P2 Page Issue Levels Section Revision Level 09

22 Chapter - Powapak - Continued

Section Revision Level 09 Page Issue Levels P3

22 Chapter - Powapak - Continued

23 Chapter - Systems Locker

24 Chapter - Channel Brush

26 Chapter - Wide Sweep Brush

P4 Page Issue Levels Section Revision Level 09

Section Revision Level 09 Page Issue Levels P5

30 Chapter - Water System

31 Chapter - Electrical System

32 Chapter - Cab Controls

P6 Page Issue Levels Section Revision Level 09

33 Chapter - Chassis Application

35 Chapter - Optional Equipment

Section Revision Level 09 Page Issue Levels P7

35 Chapter - Optional Equipment (continued)

P8 Page Issue Levels Section Revision Level 09

Body Common Parts

Mesh Screens and Doors 20 : 2

Cowl Common Parts

Page Issue 01 Chapter - Body/Rear Door/Cowl 20:1

Body Common Parts (1) - Mesh Screens and Doors

6 16 - For Mesh Shaker Option see

33 - For Hopper Filter Strainer Option

20:2 Chapter - Body/Rear Door/Cowl Page Issue 01

Body Common Parts (1) - Mesh Screens and Doors

Item No. Part No. Description Quantity

1a 294001-2 500 Body, Chrome Steel (4003) Not shown 3 - - -

1b 295100-2 605 Body, Chrome Steel (4003) - 3 - -

1c 295000-2 650 Body, Chrome Steel (4003) - - 3 -

1d 296000-2 800 Body, Chrome Steel (4003) Not Shown - - - 3

BoMs 940611, 950611, 960611

2 280528-2 Roof Access Panel (4003) - 1 1 1

Body Welded Assemblies comprise items 1 to 4 above

> 5 284040-1 Cap 4 4 4 4

8 200345-1 Access Door 2 2 2 2

Page Issue 05 Chapter - Body/Rear Door/Cowl 20:3

Body Common Parts (1) - Mesh Screens and Doors

Item No. Part No. Description Quantity

282872-2 Locker Door Installation - 4003 ) Each comprising

22 282873-2 Locker Door (4003) - 2 2 -

28 124-265 Screw M16 x 25 2 2 2 2

29 281377-2 Blanking Plate - Mesh Shaker (4003) 2 2 2 2

31 282958-1 Limit Switch Mount 1 1 1 1

20:4 Chapter - Body/Rear Door/Cowl Page Issue 04

Body Configuration - Intake Components