Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 55 views

    Auxiliary Water Pump

    Uploaded by

    Golbert Golbi
    This document provides specifications and assembly instructions for an auxiliary water pump. It includes diagrams and details dimensions and tolerances for components. It also lists serial numbers for applicable models and provides lubrication and assembly steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Auxiliary Water Pump

    Uploaded by

    Golbert Golbi
    55 views3 pages
    This document provides specifications and assembly instructions for an auxiliary water pump. It includes diagrams and details dimensions and tolerances for components. It also lists serial numbers for applicable models and provides lubrication and assembly steps.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications and assembly instructions for an auxiliary water pump. It includes diagrams and details dimensions and tolerances for components. It also lists serial numbers for applicable models and provides lubrication and assembly steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    55 views3 pages

    Auxiliary Water Pump

    Uploaded by

    Golbert Golbi
    This document provides specifications and assembly instructions for an auxiliary water pump. It includes diagrams and details dimensions and tolerances for components. It also lists serial numbers for applicable models and provides lubrication and assembly steps.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SPS343 Skid Mounted Pumper 8ZZ00001-UP(SEBP3379 - 50) - Product Structure Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product:  PUMPER 
    Model:  SPS343 PUMPER 8ZZ 
    Configuration: SPS343 Skid Mounted Pumper 8ZZ00001-UP 

    Specifications
    3512B Engine for SPF343, SPS343, and SPT343 Pumpers
    Media Number -RENR4907-06 Publication Date -01/12/2008 Date Updated -03/12/2008

    i03780690

    Auxiliary Water Pump


    SMCS - 1371

    S/N - 3KD1-UP

    S/N - 5XZ1018-UP

    S/N - 6RZ1-UP

    S/N - 8ZZ1-UP

    Illustration 1 g01486033

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 8.8.2021.
    SPS343 Skid Mounted Pumper 8ZZ00001-UP(SEBP3379 - 50) - Product Structure Page 2 of 3

    Typical example

    (A) Width of groove in the shaft for thrust washer ... 6.25 ± 0.05 mm (0.246 ± 0.002 inch)

    (B) Thickness of the new thrust washer ... 6.000 ± 0.025 mm (0.2362 ± 0.0010 inch)

    (C) Dimensions of the shaft

    Bore in the sleeve bearing for auxiliary drive shaft ... 75.000 ± 0.055 mm (2.9528 ± 0.0022 inch)
    Diameter of new auxiliary drive shaft (not shown) ... 74.900 ± 0.015 mm (2.9488 ± 0.0006 inch)

    (D) Dimensions for the impeller

    Bore diameter of the impeller ... 19.000 ± 0.013 mm (0.7480 ± 0.0005 inch)
    Diameter in the shaft for impeller ... 19.050 to 19.063 mm (0.7500 to 0.7505 inch)

    (E) Installation depth of the sleeve bearing in the water pump housing ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)

    Note: Do not lubricate the sealing lip of the lip type seal (1) .

    Minimum leakage per minute for the lip type seal at 138 kPa (20 psi) of air pressure is less than 24 cc (1.5
    cu in).

    (3) Use the following procedure in order to assemble the water pump seal assembly.

    1. Lubricate the outside diameter of ceramic ring and rubber seal (2) with clean water or with 207-1600
    Rubber Lubricant .

    2. Orient the polished face of the ceramic ring toward water pump seal assembly.

    3. Use the installation tool and hand pressure to seat the ceramic ring and the rubber seal into the water
    pump housing.

    4. Remove spring (4) from the water pump seal assembly.

    5. Lubricate the inside diameter of the water pump seal assembly with clean water or with 207-1600
    Rubber Lubricant .

    6. Use the seal installation tool and hand pressure to install the water pump seal assembly onto the shaft
    until the face of the water pump seal assembly makes light contact with the face of the ceramic ring
    and rubber seal.

    7. Install spring (4) onto the water pump seal assembly.

    Assembled length of the spring ... 17.45 ± 0.79 mm (0.687 ± 0.031 inch)

    Load on spring at assembled length ... 40.03 ± 4.45 N (9.0 ± 1.0 lb)

    Minimum leakage per minute for the water pump seal assembly at 138 kPa (20 psi) of air pressure is less
    than 20 cc (1.2 cu in).

    (6) Lubricate the shaft with a thin film of clean engine oil before pressing the impeller (5) onto the shaft.
    The end of the shaft must be flush with the face of the impeller within 0.15 mm (0.006 inch).

    (7) Lubricate the bore of the O-ring seal lightly with sealant that is being sealed.

    (8) Lubricate the bore of the O-ring seal with clean engine oil, glycerin or clean water.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 8.8.2021.
    SPS343 Skid Mounted Pumper 8ZZ00001-UP(SEBP3379 - 50) - Product Structure Page 3 of 3

    Copyright 1993 - 2021 Caterpillar Inc.  Sun Aug 8 13:13:45 UTC+0200 2021 
    All Rights Reserved. 
    Private Network For SIS Licensees. 

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 8.8.2021.

    You might also like