Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 138 views

    Indu 421: Facilities Design and Material Handling Systems: Problem 1

    Uploaded by

    Omar Abu-obialla
    The document contains three problems related to facilities design and material handling systems. Problem 1 involves determining the optimal sequence of departments in a layout using the CORELAP algorithm given a relationship chart. Problem 2 uses the ALDEP procedure to determine a layout vector and block layout for a facility given dimensional constraints and a relationship chart. Problem 3 involves computing the efficiency rating and REL-DIST score for a given 5 department layout and relationship chart (REL-chart) using a specified scoring vector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Indu 421: Facilities Design and Material Handling Systems: Problem 1

    Uploaded by

    Omar Abu-obialla
    138 views3 pages
    The document contains three problems related to facilities design and material handling systems. Problem 1 involves determining the optimal sequence of departments in a layout using the CORELAP algorithm given a relationship chart. Problem 2 uses the ALDEP procedure to determine a layout vector and block layout for a facility given dimensional constraints and a relationship chart. Problem 3 involves computing the efficiency rating and REL-DIST score for a given 5 department layout and relationship chart (REL-chart) using a specified scoring vector.

    Original Title

    Tutorial #7

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains three problems related to facilities design and material handling systems. Problem 1 involves determining the optimal sequence of departments in a layout using the CORELAP algorithm given a relationship chart. Problem 2 uses the ALDEP procedure to determine a layout vector and block layout for a facility given dimensional constraints and a relationship chart. Problem 3 involves computing the efficiency rating and REL-DIST score for a given 5 department layout and relationship chart (REL-chart) using a specified scoring vector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    138 views3 pages

    Indu 421: Facilities Design and Material Handling Systems: Problem 1

    Uploaded by

    Omar Abu-obialla
    The document contains three problems related to facilities design and material handling systems. Problem 1 involves determining the optimal sequence of departments in a layout using the CORELAP algorithm given a relationship chart. Problem 2 uses the ALDEP procedure to determine a layout vector and block layout for a facility given dimensional constraints and a relationship chart. Problem 3 involves computing the efficiency rating and REL-DIST score for a given 5 department layout and relationship chart (REL-chart) using a specified scoring vector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    TUTORIAL #7 o abuo@encs.concordia.

    ca

    INDU 421: FACILITIES DESIGN AND MATERIAL HANDLING SYSTEMS


    PROBLEM 1

    • Given the relationship chart below determine the sequence of the placement of the departments in the
    layout based on the CORELAP algorithm. Find the best layout assuming that all the departments are of
    equal size. Use these closeness values: A=4, E=3, I=2, O=1, U=0, X=-4 and consider half weight if the
    departments are only touching by one point.

    Page 1 of 3
    TUTORIAL #7 o abuo@encs.concordia.ca

    PROBLEM 2

    • Use ALDEP procedure to determine the layout vector and construct the block layout for the facility
    based on the relationship chart and the departmental dimensions given below. Evaluate your layout with
    adjacency score and efficiency rating. The dimensions of the building are 90ftx150ft. Use the sweep width
    of 3, the minimum acceptable level of importance E and the following closeness values: A=64, E=16, I=4,
    O=1, U=0, X=-1024.

    Page 2 of 3
    TUTORIAL #7 o abuo@encs.concordia.ca

    PROBLEM 3

    • Consider BLOCPLAN. Suppose the following REL-chart and layout are given for a five department prob-
    lem. (It is assumed that each grid in the layout represents a unit square.) Further suppose that the
    following scoring vector is being used: A=10, E=5, O=1, U=0, and X=-10.

    1 2 3 4 5
    1 - A U E U
    2 - U U I
    3 - U X
    4 - A
    5 -

    4 4 4 4 4 4 1 1 1 1
    4 4 4 4 4 4 1 1 1 1
    4 4 4 4 4 4 1 1 1 1
    4 4 4 4 4 4 1 1 1 1
    5 5 5 5 3 3 2 2 2 2
    5 5 5 5 3 3 2 2 2 2

    a. Compute the efficiency rating.


    b. Compute the REL-DIST score.

    Page 3 of 3

    You might also like