M/GE-PSW-PSE-01

Mini Fast / Gigabit Ethernet PoE+ Media Converter

10/100/1000Base-T PoE+ RJ-45 Port + 100/1000Base-X SFP Slot
This Gigabit Ethernet Stand-alone Mini Media Converter provides cost-
Ordering Information
effective media conversion between 10/100/1000Base-T ports and M/GE-PSW-PSE-01
Media Converters

10/100/1000Base-T PoE+ RJ-45 port

100/1000Base-SX/LX ports. With its fixed configuration, deployments are [100 m/ 328 ft.]
just plug-and-play, and its small size makes it ideal for locations where space to 100/1000Base-X SFP slot (empty)
is limited. Operating at Layer 2, the data link layer, this converter not only
Optional Accessories (sold separately)
converts copper to fiber, but it also provides rate conversion allowing legacy
10/100 copper devices to connect to 1000Base-SX/LX fiber. SFP Modules

In addition to providing copper to fiber conversion, this converter is also Mounting Options (sold separately)
classified as Power Sourcing Equipment (PSE), meaning it combines data WMBM
received over the fiber optic link with 56VDC input power to provide power Wall Mount Bracket for Mini
and data to a Powered Device (PD) over the twisted Pair cable, while complying with the IEEE 802.3af DRBM
and IEEE 802.3at PoE+ standards. This allows the user to take advantage of the benefits of fiber cabling, DIN Rail Mount Bracket for Mini
along with the benefits of Power-over-Ethernet (PoE) technology. RMBM
Rack Mount Bracket for Mini, use with
Supporting PoE allows this converter to send data and power to devices like VoIP Phones, Security RMS19-SA4-02
Cameras, and Wireless Access Points, especially if they need to be located in remote areas of your
network that can only be reached with fiber optic cabling. Note: Cannot be used with M-MCR-01 or
E-MCR-05 Racks due to power limitations

Features Specifications
● Wall mount, DIN Rail, or table top Standards IEEE 802.3-2012 Power Supply Included
IEEE 802.3af/at PSE-PoE To order the corresponding country
installation
IEEE 802.3ab specific power supply, add the
● External AC/DC power supply IEEE 802.3z extension from the list below to the
IEEE 802.3x end of the SKU;
included with country specific
IEEE 802.3az Ex: M/GE-PSW-PSE-01-NA
power cord
Switch Features Max Packet Size 10,000 bytes -NA = Country Code
● 2-port 10/100/1000 copper to fiber Max MAC Addresses 8k -NA = North America
media conversion with IEEE 802.3at 1Mbit shared buffer memory -LA = Latin America
PoE+ on the copper port Status LEDs PWR On (green) = Power to converter -EU = Europe
PoE Off = No PD detected -UK = United Kingdom
● Supports full 30 Watts of power to On = AF mode or AT mode -SA = South Africa
the twisted pair port Top LED TP Status -JP = Japan
Bottom LED Fiber Status -OZ = Australia
● SFP slots can support any 100Base- -BR = Brazil
FX or 1000Base-X fiber SFP module Dimensions Width: 1.8” [46 mm]
Height: 0.85" [22 mm]
● Supports Auto-Negotiation Depth: 3.3” [85 mm]

● Supports Auto-MDI/MDIX Power Consumption 34W with full IEEE 802.3at 30 Watt load Features Continued
Power Source External AC/DC 56VDC, 40W power adapter
● Active Link Pass Through (ALPT) ● Jumbo frame support
Power-over-Ethernet Max PoE Budget: 30 Watts
– Automatically detect the loss of Receive Environment Operating: 0°C to +40°C (with included power supply) ● 8K MAC address table
(Rx) signals on either fiber or copper Storage: -40°C to +85°C
port and propagate the failure to the ● LEDs indicators for power status,
Humidity: 5% to 95% (non-condensing)
end devices Altitude: 0 – 10,000 ft. Link/Activity per port, & PoE status/
classification
● Auto Power Reset Weight 2 lbs. [0.9 kg]
MTBF M/GE-PSW-PSE-01 only 2,941,024 hours ● Plug-and-Play fixed configuration, no
– Re-set the power to the end PD device dip-switches
(Telcordia SR-332)
during a Link Pass Through (LPT) event,
ensuring it is ready to go when the fault Included Power Supply only (25173) ● Over-current protection
is corrected 159,357 hours (MIL-DHBK-217F)
● Under-current protection
Certifications EN55032-2012 Class A, IEC 61850-3:2002,
EN55024-2010, CE Mark, Power Supply is UL listed ● Fault protection input
Warranty Lifetime

82 +1.952.941.7600 | www.transition.com | sales@transition.com 051021