51154-29-497 R01 Dt. 17.05.21

Customer Support Inc.
VENDOR SERVICE BULLETIN

ATA CHAPTER TITLE KEY WORD/COMPONENT BRIEF STATEMENT OF WORK INVOLVED
29 - Hydraulic Power Electric Motor Pump (EMP) Product Improvement: New Motor and Lip Seal
REVISION TRANSMITTAL SHEET
This page transmits Revision 1 for Service Bulletin 51154-29-497.
SUMMARY:
Page 2 Paragraph 2.B. 1) From: For product failures within warranty, Parker will
incorporate the VSB FOC. For in warranty returns not
attributed to motor failure, Parker offers to upgrade to
the new motor configuration for additional charges of
$4,800. Units returned outside of the warranty period
can have the VSB incorporated within the current con-
ditional flat rate repair mod of $8,500.
To: EMPs that have been removed for cause, con-

firmed for failure, within the warranty period, will be eli-
gible for a free of charge incorporation of this Service
Bulletin. After the warranty period has expired, opera-
tors are requested to contact Parker Hannifin Corpora-
tion, Customer Support for a quote to accomplish this
Service Bulletin.
Page 2 Paragraph 2.B. 2) Added: Damage from mishandling and/or abnormal

use, and parts or work required outside the scope of
this Service Bulletin is subject to time and material
charges.
No additional work is required for parts previously modified by prior issue of this Service Bulletin.
REVISION HISTORY:
Initial Issue Aug 8, 2017

Revision 1 May 17, 2021

Rev. 1 May 17, 2021 51154-29-497
Page 1 of 1
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER-HANNIFIN CORPORATION. THIS DOCUMENT IS FURNISHED ON THE
UNDERSTANDING THAT THE DOCUMENT AND THE INFORMATION IT CONTAINS WILL NOT BE COPIED OR DISCLOSED TO OTHERS EXCEPT WITH THE WRITTEN CONSENT
OF PARKER, WILL NOT BE USED FOR ANY PURPOSE OTHER THAN CONDUCTING BUSINESS WITH PARKER, AND WILL BE RETURNED AND ALL FURTHER USE
DISCONTINUED UPON REQUEST BY PARKER. COPYRIGHT PARKER. YEAR OF COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.


ATA CHAPTER TITLE KEY WORD/COMPONENT BRIEF STATEMENT OF WORK INVOLVED
29 - Hydraulic Power Electric Motor Pump (EMP) Product Improvement: New Motor and Lip Seal
1. PLANNING INFORMATION
A. Effectivity
This Service Bulletin is applicable to the Parker Hydraulic Systems Division (HSD) Electric Mo-
tor Pump (EMP) P/N 51154-04.
B. Reason
Parker has identified product improvements to the motor assembly that will increase the EMP
reliability and service life.
C. Description
1. The bearing inside the new motor, P/N 26426-03, has a different type of grease that will
help reduce bearing wear and increase the service life of the bearing.
2. A new lip seal, P/N 26623, with extended service life will keep normal shaft seal leakage
from going into the motor.
D. Compliance
Accomplishment of this Service Bulletin is recommended and can be implemented at the oper-
ator’s discretion.
E. Approval
1. The modification procedures described in this SB are reviewed and technically accepted
by Airbus to apply to the Airbus fleet affected.
2. This SB does not contain any change information that revises the equipment definition
covered by Airbus approved modifications.
F. Manpower
Not applicable.
G. Weight and Balance
None.

Rev. 1 May 17, 2021 51154-29-497
Page 1 of 4

D. Electrical Load Data
Not changed.
E. Software Accomplishment Summary
Not applicable.
F. References
Parker Hannifin Corporation, Component Maintenance Manual (CMM) 29-10-70.
G. Other Publications Affected
CMM 29-10-70 will be updated with the information in this VSB.
H. Interchangeability or Intermixability of Parts
Parts are two-way interchangeable.
2. MATERIAL INFORMATION
A. Material Price and Availability
1) A new motor, P/N 26426-03 and a new lip seal, P/N 26623, are required to implement
this VSB.
2) Contact a Parker Hydraulic Systems Division Service Center at one of the addresses in
paragraph 2. B. 1) for material price and availability.
B. Industry Support Information
1) EMPs that have been removed for cause, confirmed for failure, within the warranty period,
will be eligible for a free of charge incorporation of this Service Bulletin. After the war-
ranty period has expired, operators are requested to contact Parker Hannifin Corporation,
Customer Support for a quote to implement this Service Bulletin.
2) Damage from mishandling and/or abnormal use, and parts or work required outside the
scope of this Service Bulletin is subject to time and material charges.
PARKER HANNIFIN CORPORATION PHONE: (269) 384-3400

Hydraulic Systems Division FAX: (269) 384-3512
Customer Support Service Center
2220 Palmer Avenue REPAIR STATION NO.: UCER345K
Kalamazoo, Michigan 49001
USA
OR:

Rev. 1 May 17, 2021 51154-29-497
Page 2 of 4

PARKER HANNIFIN CORPORATION PHONE: 49-6134-2040
Wiesbaden Customer Support FAX : 49-6134-204188
Service Center
Lorenz-Schott-Strasse 9 REPAIR STATION NO.: P2KY734J
55252 Mainz-Kastel Germany
OR:
Aerospace Component Engineering Services Pte Ltd PHONE: (65) 6546-1885

Customer Support FAX : (65) 6546-4885
45 Changi North Crescent
Singapore, 499622 REPAIR STATION NO.: OQYY378Y
3) Operators who want to perform the upgrade themselves are requested to contact their
Parker Account Customer Service Representative at one of the addresses above to or-
der the items necessary to perform this service bulletin.
4) Re-identified Parts
51154-04 EMP’s that have this VSB implemented must have the identification plate
identified with “AMDT A”, as shown in Figure 1.
C. Tooling - Price and Availability
Not applicable.
3. ACCOMPLISHMENT INSTRUCTIONS
A. Remove the old motor and lip seal as described in the Disassembly Section of CMM 29-
10-70.
B. Install the new motor and lip seal as described in the Assembly Section of CMM 29-10-
70.
C. Test the EMP as described in the Testing and Fault Isolation Section of CMM 29-10-70.

Rev. 1 May 17, 2021 51154-29-497
Page 3 of 4

D. After installation of the new parts on a P/N 51154-04 EMP, permanently mark “AMDT A” on the
identification plate as shown in Figure 1. If a new identification plate is installed, copy all infor-
mation from the original identification plate to the new identification plate.
Figure 1 – -04 Identification Plate Marking

Rev. 1 May 17, 2021 51154-29-497
Page 4 of 4

51154-29-497 R01 Dt. 17.05.21

Uploaded by

Copyright:

Available Formats

51154-29-497 R01 Dt. 17.05.21

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

51154-29-497 R01 Dt. 17.05.21

Uploaded by

Copyright:

Available Formats

Customer Support Inc.

VENDOR SERVICE BULLETIN

REVISION TRANSMITTAL SHEET

This page transmits Revision 1 for Service Bulletin 51154-29-497.

To: EMPs that have been removed for cause, con-

Page 2 Paragraph 2.B. 2) Added: Damage from mishandling and/or abnormal

Initial Issue Aug 8, 2017

Initial Issue Aug 8, 2017

VENDOR SERVICE BULLETIN

G. Weight and Balance

Initial Issue Aug 8, 2017

VENDOR SERVICE BULLETIN

E. Software Accomplishment Summary

Parker Hannifin Corporation, Component Maintenance Manual (CMM) 29-10-70.

G. Other Publications Affected

CMM 29-10-70 will be updated with the information in this VSB.

H. Interchangeability or Intermixability of Parts

Parts are two-way interchangeable.

A. Material Price and Availability

B. Industry Support Information

PARKER HANNIFIN CORPORATION PHONE: (269) 384-3400

Initial Issue Aug 8, 2017

VENDOR SERVICE BULLETIN

Aerospace Component Engineering Services Pte Ltd PHONE: (65) 6546-1885

C. Tooling - Price and Availability

Initial Issue Aug 8, 2017

VENDOR SERVICE BULLETIN

Figure 1 – -04 Identification Plate Marking

Initial Issue Aug 8, 2017

You might also like