VISVESVARAYA TECHNOLOGICAL UNIVERSITY

Jnana sangama, Belagavi – 590018

An Internship Report on
“EMBEDDED SYSTEMS IN IOT- LED BLINKING WITH LPC2148
ARMv7 AND ARDUINO BASED VOICE CONTROLLED CAR”

Submitted in the partial fulfillment of the requirements for the Award of Degree of

BACHELOR OF ENGINEERING
In
ELECTRONICS & COMMUNICATION ENGINEERING

Submitted by
SWATHI H A
3VC15EC088

Internship carried out at

Agimus Technologies Private Limited

Vijayanagara , Bengaluru.

Internal Guide External Guide

Mr. Sudharshan Banakar Parameswara Naik L
Dept. of ece, rymec Managing Director
Agimus Technologies Private Limited
Bangalore Urban, Karnataka, India

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

RAO BAHADUR Y. MAHABALESWARAPPA ENGINEERING COLLEGE
 BALLARI- 583 104
2020-2021

VISVESVARAYA TECHNOLOGICAL UNIVERSITY

Jnana sangama, belagavi – 590018

An Internship Report on
“EMBEDDED SYSTEMS IN IOT- LED BLINKING WITH LPC2148
ARMv7 AND ARDUINO BASED VOICE CONTROLLED CAR”

Submitted in the partial fulfillment of the requirements for the Award of Degree of

BACHELOR OF ENGINEERING
In
ELECTRONICS & COMMUNICATION ENGINEERING

Submitted by
SWATHI H A
3VC15EC088

Under the Guidance of

Mr.Sudharshan Banakar
Dept. of ece, rymec

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

RAO BAHADUR Y. MAHABALESWARAPPA ENGINEERING COLLEGE
BALLARI- 583 104
 2020-2021
V.V SANGHA’S

RAO BAHADUR.Y.MAHABALESHWARAPPA ENGINEERING COLLEGE

BALLARI– 583104
(Affiliated to Visvesvaraya Technological University, Belagavi and approved by AICTE, New Delhi)

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

CERTIFICATE

Certified that the internship report entitled is “Dual axis solar tracker with Arduino Uno as
Application of Internet of Thing.” Carried out by Ms. SWATHI H A bearing USN: 3VC15EC088, a
bonafide student of Rao Bahadur Y Mahabaleswarappa Engineering College, Ballari in partial
fulfillment for the Award of Bachelor of Engineering in Electronics & Communication Engineering of
Visvesvaraya Technological University, Belagavi during the year 2020-2021. It is certified that all
corrections/suggestions indicated for Internal Assessment have been incorporated in the report
deposited in the departmental library. The internship report has been approved as it satisfies the
academic requirements in respect of internship work prescribed for the said Degree.

Mr. Sudharshan Banakar Dr. Savita Sonoli

Internship Guide Vice Principal & HOD

Dr. T. Hanumantha Reddy

Principal

Name of the Examiners Signature with Date

1.

2.
 ACKNOWLEDGEMENT

It is my privilege and primary duty to express my gratitude and respect to all those who
guided and inspired me in successful completion of this internship.

I express my sincere thanks to Dr. T. Hanumantha Reddy , Principal of Rao Bahadur

Y Mahabaleswarappa Engineering College, Ballari. Mr. Sudharshan Banakar Internship
guide. Mrs. Rohini H M, Mr. Sudharshan Banakar, internship coordinators. Teaching & non-
teaching staff of E&CE Department for their cooperation in completion of the internship work
and Management of Rao Bahadur Y. Mahabaleswarappa Engineering College, Ballari for
providing the facilities to carry out this internship.

I also express my sincere thanks to Mr. Parameswara Naik L, Managing Director &

Internship external guide, and the entire team at Agimus Technologies Private Limited,
Bengaluru who guided me to carry out my internship successfully.

Lastly, I would like to express my gratitude to all those who have directly or indirectly
contributed their efforts in making internship a success.

SWATHI H A
3VC15EC088

I
 DECLARATION

I, SWATHI H A, student of eight semester BE, in the Department of Electronics and Communication
Engineering, RYMEC, Ballari declare that the internship entitled “Dual axis solar tracker with
Arduino Uno as Application of Internet of Thing.” has been carried out by me at Agimus
Technologies Private Limited , Bengaluru and submitted in partial fulfillment of the course
requirements for the award of degree in Bachelor of Engineering in Electronics & Communication
Engineering, of Visvesvaraya Technological University, Belagavi during the year 2020-2021

SWATHI H A
3VC15EC088

II
EXECUTIVE SUMMARY

III
 TABLE OF CONTENTS

Sl.No CHA Page. No

PTER

ACKNOWLEDGEMENT I

DECLARATION II

EXECUTIVE SUMMARY III

TABLE OF CONTENTS IV

CHAPTER 1 ORGANIZATION PROFILE 1

1.1 Introduction 1
1.2 VISION
1.3 MISSION
1.4 OBJECTIVES

CHAPTER 2 ABOUT THE DEPARTMENT 3

2.1 Internet of Things 3
2.2 Components of IoT 4
2.3 SENSOR 9
2.4 Connectivity 9
People and process
2.5 9
Scope of IoT
2.6 9
Arduino Uno Board
2.7 11
Syntax of Arduino C program
2.8 Procedure for Interfacing in Arduino IDE 11
2.9 Interfacing of PWM (Pulse Width
Modulation)

2.10 Interfacing a BUZZER 11

2.11 Interface LCD (Liquid Crystal Display) Using an 14
Arduino

Arduino LCD Interfacing with the Arduino

2.12 16
Module
 2.13 Arduino LCD Interfacing with the Arduino Module 19
2.14 Serial Communication 20
2.15 RGB LED AND APPLICATIONS 22

CHAPTER 3 TASK PERFORMED 24

3.1 24
Introduction to Internet of Thing

3.2 Dual axis solar tracker with Arduino Uno as 26

Application of Internet of Thing
30
3.3 Applications

CHAPTER 4 INTERNSHIP OUTCOME 31

Conclusion
Reference
 EMBEDDED SYSTEMS IN IOT- LED BLINKING WITH LPC2148 ARMv7 AND
ARDUINO BASED VOICE CONTROLLED CAR

CHAPTER 1

ORGANIZATION PROFILE

1.1 ACHIEVEMENTS

TechnoFly Solutions is a leading electronics product design, development and services company.
The professionals with industrial experience in embedded technology, real time software,
process control and industrial electronics held the company.
The company is the pioneers in design and development of Single Board Computers, Compilers
for micro-controllers within India. Talented professional in the field of embedded hardware,
software design and development toil to reach its excellence.
TechnoFly Solutions & Consulting was found in year 2017 by a team with 14+ years of
experience in embedded systems domain. Technofly Solutions focuses globally on automotive
embedded technologies and VLSI Design, Corporate Training & Consulting. Till now we have
delivered more than 15+ Corporate Trainings for companies working in Embedded Automotive
Technologies in India. Also involved in the Development of OBD2 (On Board Diagnose Product
for Passenger cars) for clients in India.
Expertise in Embedded software development:
1. Microcontroller Drivers
2. Boot loader and System software
3. CAN, LIN and other serial communication software
4. On Board Diagnostics services [ISO-14229 and ISO-15765]
5. Model based software development: Modelling, Simulation, Auto coding and
Reverse Engineering
6. Application software development compliant with MISRA-C
7. UTOSAR Configuration and generation.
Automotive domain expertise, Process quality:
1. Body Control Module
2. Power Electronics, DCDC Convertors
3. HVAC Systems
Dept of E&CE, RYMEC, BALLARI 2020-2021 Page 6
 EMBEDDED SYSTEMS IN IOT- LED BLINKING WITH LPC2148 ARMv7 AND
ARDUINO BASED VOICE CONTROLLED CAR

REFERENCES

[1] “Computers as Components: Principles of Embedded Computing Systems Design” by Wayne

Wolf.
[2] “Embedded Systems: A Contemporary Design Tool” by James K Peckol.
[3] “Embedded Systems: Design and Applications” by Barrett

Dept of E&CE, RYMEC, BALLARI 2020-2021 Page 7