Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    How To Stop Alarm Security Indicator Light: Instruments and Controls

    Uploaded by

    MaiChiVu
    The document provides instructions for operating the Nissan Vehicle Immobilizer System and what to do if the engine fails to start or the security indicator light remains on. It explains that the system requires the registered key to start the engine and describes restarting the engine if it fails to start due to interference. It also notes that the security indicator light will blink when the ignition is on and remain on if there is a system malfunction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    How To Stop Alarm Security Indicator Light: Instruments and Controls

    Uploaded by

    MaiChiVu
    48 views1 page
    The document provides instructions for operating the Nissan Vehicle Immobilizer System and what to do if the engine fails to start or the security indicator light remains on. It explains that the system requires the registered key to start the engine and describes restarting the engine if it fails to start due to interference. It also notes that the security indicator light will blink when the ignition is on and remain on if there is a system malfunction.

    Original Description:

    Original Title

    page-68

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for operating the Nissan Vehicle Immobilizer System and what to do if the engine fails to start or the security indicator light remains on. It explains that the system requires the registered key to start the engine and describes restarting the engine if it fails to start due to interference. It also notes that the security indicator light will blink when the ignition is on and remain on if there is a system malfunction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views1 page

    How To Stop Alarm Security Indicator Light: Instruments and Controls

    Uploaded by

    MaiChiVu
    The document provides instructions for operating the Nissan Vehicle Immobilizer System and what to do if the engine fails to start or the security indicator light remains on. It explains that the system requires the registered key to start the engine and describes restarting the engine if it fails to start due to interference. It also notes that the security indicator light will blink when the ignition is on and remain on if there is a system malfunction.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    opened by releasing the door inside lock Nissan Vehicle Immobilizer System key (for Canada.

    or Canada. Operation is subject to the follow-


    knob, the alarm is activated.) example, when interference is caused by an- ing two conditions;
    other Nissan Vehicle Immobilizer System key,
    I Opening the hood. (Even if the hood is (1) This device may not cause harmful
    an automated toll road device or automated interference, and (2) this device must ac-
    opened by the hood release handle, the
    alarm is activated.) payment device on the key ring), restart the cept any interference received, including
    engine using the following procedures: interference that may cause undesired op-
    I Opening the back door glass hatch. (Even if eration of the device.
    the back door glass hatch is opened by the 1. Leave the ignition switch in the ON position
    opener switch, the alarm is activated.) for approximately 5 seconds. CHANGES OR MODIFICATIONS NOT EX-
    2. Turn the ignition switch to the OFF or LOCK PRESSLY APPROVED BY THE MANUFAC-
    I Connecting the battery connector after it TURE RESPONSIBLE FOR COMPLIANCE
    has been disconnected from the battery for position, and wait approximately 5 seconds.
    COULD VOID THE USER’S AUTHORITY TO
    more than 1 second. 3. Repeat step 1 and 2. OPERATE THE EQUIPMENT.
    How to stop alarm 4. Restart the engine while holding the device Security indicator light
    The alarm will stop only by unlocking a door or (which may have caused the interference)
    This light blinks whenever the ignition switch is
    back door with the key or multi-remote control- separate from the registered Nissan Ve-
    in the LOCK, OFF or ACC position. This
    ler. The alarm will not stop if the ignition switch hicle Immobilizer System key.
    function indicates the security systems
    is turned to ACC. equipped on the vehicle are operational.
    If the no start condition re-occurs, NISSAN
    If the system does not operate as de- recommends placing the registered Nissan If the Nissan Vehicle Immobilizer System is
    scribed above, have it checked by your Vehicle Immobilizer System key on a separate malfunctioning, this light will remain on while
    NISSAN dealer. key ring to avoid interference from other de- the ignition key is in the ON position.
    vices.
    NISSAN VEHICLE IMMOBILIZER If the light still remains on and/or the en-
    SYSTEM Statement related to section 15 of FCC gine will not start, see your NISSAN dealer
    rules for Nissan Vehicle Immobilizer Sys- for Nissan Vehicle Immobilizer System ser-
    The Nissan Vehicle Immobilizer System will tem vice as soon as possible. Please bring all
    not allow the engine to start without the use of (CONT ASSY - IMMOBILIZER) Nissan Vehicle Immobilizer System keys
    the registered Nissan Vehicle Immobilizer Sys- that you have when visiting your NISSAN
    tem key. This device complies with part 15 of the dealer for service.
    FCC Rules and RSS-210 of Industry
    If the engine fails to start using the registered
    Instruments and controls 2-15

    Z 00.1.17/R50-D/V5 X

    You might also like