S400-0504

High Performance
401 S. Highland Avenue
Aurora, IL 60506
Phone: 877-436-7977
Butterfly Valve
Fax: 630-844-4124
www.henrypratt.com Series 400
Construction Specifications:

Sizes: 2" through 48"

Body: Carbon Steel A216-WCB

Stainless Steel A351-CF8M

Disc: Stainless Steel A351-CF8M

Stem: Stainless Steel 17-4PH

Seat: RTFE

Actuation Options: Worm Gear Lever

Pneumatic Electric

Features:
1. Body — High quality one piece casting which 7. Stem — Manufactured of high strength
provides consistent uniformity. Sizes 2 inch to 17-4 ph Stainless Steel to provide maximum
6 inch are investment castings. Body is strength and stability for high torque
available in Wafer, Lug, Double Flanged, and applications.
Butt-welded.
8. Disc — Made of CF8M Stainless Steel and
2. Underneath Drawn Gland Packing — Allows engineered to allow for quick release from the
for direct mounting of actuation and ease of seat. This reduces the amount of torque
adjustment. needed to un-seat the disc.
3. Seat — An advanced design that provides a 9. Disc Taper Pins — Pins are offset from the
bidirectional interference and pressure center of the stem which places them in
assisted seal. This design achieves maximum compression rather than in sheer. This gives
seal at low, medium and high pressure. them a yield point greater than the stem itself.
Pins are welded in place after final assembly
4. Extended Neck — Allows for two inches of
and testing.
pipe insulation.
10. Integrally Cast Disc Position Stop —
5. Packing — PTFE is a cup and cone system
Machined position stop on the body locates
and Graphite is die formed rings for positive
the disc in the seat to achieve maximum seat
seals.
and seal life.
6. Bearings — Made of Graphite impregnated or
Reinforced PTFE impregnated 316 Stainless
Steel to ensure long service life.
ANSI Class 150 2"-12" Lugged and Wafer

n = NO. OF HOLES
n = NO. OF HOLES
B.C. = BOLT CIRCLE
B.C. = BOLT CIRCLE
s = SIZE OF HOLES
s = SIZE OF HOLES

LUG WAFER

Valve Dimensions
—————— FLANGE DIMENSIONS ——————
Lug Wafer
Size A C C1 D F G H B.C. n s n s
2" 1.85 4.92 3.93 1.69 4 1.25 .563 4.75 4 5/8-11 UNC 2 0.75
2.5" 2.44 5.63 4.02 1.81 4 1.25 .625 5.50 4 5/8-11 UNC 2 0.75
3" 2.91 6.23 4.41 1.88 4 1.25 .625 6.00 4 5/8-11 UNC 2 0.75
4" 3.82 7.01 4.84 2.12 4 1.25 .750 7.50 8 5/8-11 UNC 2 0.75
6" 5.43 8.34 6.53 2.25 4 1.25 .750 9.50 8 3/4-10 UNC 2 0.88
8" 7.36 9.45 7.72 2.50 6 1.25 .875 11.75 8 3/4-10 UNC 2 0.88
10" 9.29 11.02 8.66 2.81 6 2.00 1.125 14.25 12 7/8-9 UNC 2 1.00
12" 10.79 12.00 10.43 3.19 6 2.00 1.125 17.00 12 7/8-9 UNC 2 1.00

ANSI Class 150 14"- 24" Lugged and Wafer

n = NO. OF HOLES n = NO. OF HOLES

B.C. = BOLT CIRCLE B.C. = BOLT CIRCLE
s = SIZE OF HOLES s = SIZE OF HOLES
18-24" HAVE 4 HOLES

LUG WAFER

Valve Dimensions
—————— FLANGE DIMENSIONS ——————
Lug Wafer
INCH MM A C C1 D F G H B.C. n s n s
14 350 12.44 13.19 11.81 3.62 6.00 2.25 1.375 18.75 12 1-8 UNC 2 1.12
16 400 14.71 15.47 13.58 4.00 6.88 3.00 1.875 21.75 16 1-8 UNC 2 1.12
18 450 16.46 16.81 14.76 4.50 6.88 3.00 1.875 22.75 16 1 1/8-8 UNC 4 1.25
20 500 18.43 17.13 16.14 5.00 6.88 3.00 2.125 25.00 20 1 1/8-8 UNC 4 1 1/8-8 UNC
24 600 21.57 20.87 18.70 6.06 11.00 4.00 2.555 29.50 20 1 1/4-8 UNC 4 1 1/4-8 UNC
ANSI Class 150 30"- 48" Lugged and Wafer

n = NO. OF HOLES n = NO. OF HOLES

B.C. = BOLT CIRCLE B.C. = BOLT CIRCLE
s = SIZE OF HOLES s = SIZE OF HOLES

LUG WAFER

Valve Dimensions
—————— FLANGE DIMENSIONS ——————
Lug Wafer
Size A C C1 D F G H B.C. n s n s
30" 27.90 24.60 23.62 7.48 11.5 5.0 3.15 36.00 28 1 1/4-8 UNC 4 1 1/4-8 UNC
36" 33.45 28.35 27.36 7.99 11.5 5.0 3.15 42.75 32 1 1/2-8 UNC 4 1 1/2-8 UNC
42" 39.92 34.45 33.46 9.49 13.5 6.0 4.00 49.50 36 1 1/2-8 UNC 4 1 1/2-8 UNC
48" 45.75 36.42 35.04 10.0 13.5 6.0 4.00 56.00 44 1 1/2-8 UNC 4 1 1/2-8 UNC

Valve Dimensions ANSI Class 300 2"-12"

———— FLANGE DIMENSIONS ————
Lug Wafer
Lugged and Wafer
Size A C C1 D F G H B.C. n s n s
2" 1.85 4.92 3.93 1.69 4 1.25 .563 5.00 8 5/8-11 UNC 2 0.88
2.5" 2.44 5.63 4.02 1.81 4 1.25 .625 5.88 8 3/4-10 UNC 2 0.88
3" 2.91 6.23 4.41 1.88 4 1.25 .625 6.62 8 3/4-10 UNC 2 0.88 n = NO. OF HOLES
B.C. = BOLT CIRCLE
4" 3.82 7.01 4.84 2.12 4 1.25 .750 7.88 8 3/4-10 UNC 2 0.88 s = SIZE OF HOLES
6" 5.43 8.66 6.89 2.31 4 1.25 .750 10.62 12 3/4-10 UNC 2 0.88
8" 7.36 10.43 8.66 2.88 6 2.00 1.125 13.00 12 7/8-9 UNC 2 1.00 n = NO. OF HOLES
10" 9.29 11.42 9.53 3.25 6 2.00 1.125 15.25 16 1'-8 UNC 2 1'-8 UNC B.C. = BOLT CIRCLE
s = SIZE OF HOLES
12" 10.79 10.83 13.00 3.62 6 2.00 1.375 17.75 16 1 1/8-8 UNC 2 1 1/8-8 UNC

LUG

WAFER

n = NO. OF HOLES
B.C. = BOLT CIRCLE
s = SIZE OF HOLES

ANSI Class 300 14"- 24"

Lugged and Wafer
Valve Dimensions
———— FLANGE DIMENSIONS ————
n = NO. OF HOLES Lug Wafer
LUG B.C. = BOLT CIRCLE
s = SIZE OF HOLES Size A C C1 D F G H B.C. n s n s
14" 12.44 14.76 12.80 4.62 8 3.00 1.875 20.25 20 1 1/8-8 UNC 4 1 1/8-8 UNC
16" 14.25 16.73 14.45 5.24 8 3.00 2.125 22.50 20 1 1/4-8 UNC 4 1 1/4-8 UNC
18" 16.46 18.30 16.14 5.88 11.5 4.00 2.562 24.75 24 1 1/4-8 UNC 4 1 1/4-8 UNC
20" 18.43 19.00 17.52 6.25 11.5 4.00 2.562 27.00 24 1 1/4-8 UNC 4 1 1/4-8 UNC
24" 21.57 22.83 20.55 7.12 13.0 4.50 3.150 32.00 24 1 1/2-8 UNC 4 1 1/2-8 UNC

WAFER
ANSI Class 300 30"- 48" Lugged and Wafer

n = NO. OF HOLES n = NO. OF HOLES

B.C. = BOLT CIRCLE B.C. = BOLT CIRCLE
s = SIZE OF HOLES s = SIZE OF HOLES

LUG WAFER

Valve Dimensions
—————— FLANGE DIMENSIONS ——————
Lug Wafer
Size A C C1 D F G H B.C. n s n s
30" 27.90 26.38 26.00 9.06 13.5 6.0 4.00 39.25 28 1 3/4-8 UNC 4 1 3/4-8 UNC
36" 33.45 31.10 30.31 9.49 13.5 6.0 4.00 46.00 32 2-8 UNC 4 2-8 UNC
42" 39.92 36.40 35.43 11.81 13.5 6.0 4.00 47.50 32 1 5/8-8 UNC 4 1 5/8-8 UNC
48" 45.75 39.40 38.40 13.78 16.5 7.0 6.00 54.00 32 1 7/8-8 UNC 4 1 7/8-8 UNC

High Performance Butterfly Valve Specifications

Service ANSI Class 150 – 285 psi
ANSI Class 300 – 720 psi
General
All valves shall be capable of bi-directional, drop tight service to rated pressure, conforming to the
design standards of ANSI B16.34 steel valves and ANSI B16.5 flange mating. Valves shall be Pratt
Series 400 ANSI 150 (or ANSI 300) or approved equal.
Valve Body
The valve body shall be constructed of carbon steel ASTM A216 WCB (or stainless steel ASTM A351,
Grade CF8M), wafer (or lug wafer) design for installation between ANSI B16.5 flanges 150# (or 300#).
Laying length shall conform to MSS-SP67, latest revision. Body, when carbon steel, shall be painted
with a baked on epoxy powder coating.
Valve Seats
Seat shall be PTFE, retained in the body and be replaceable without removing the disc or stem.
Valve Disc
The disc shall be constructed of stainless steel A351-CF8M and shall be offset to provide uninterrupted
360º seating.
Valve Shaft
Valve shafts shall be 17-4 stainless steel. At the operator end of the valve shaft, a packing gland
utilizing “V” type chevron packing shall be utilized.
Testing
Valves shall be tested in accordance with ANSI B16.104 Class V.