Smart Irrigation Monitoring System Using Blynk App
Smart Irrigation Monitoring System Using Blynk App
Volume 6, Issue 7, July – 2021 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
Smart Irrigation Monitoring System Using Blynk App
Priyanka S Talekar Abhishek Kumar Amit Kumar Manish Kumar Md. Irfan Hashmi
Assistant Professor Dept. of CSE, Dept. of CSE, Dept. of CSE, Dept. of CSE,
Dept. of CSE, Sambhram Institute Sambhram Institute Sambhram Institute Sambhram Institute
Sambhram Institute of Technology, of Technology, of Technology, of Technology,
of Technology, Bangalore, Bangalore, Bangalore, Bangalore,
Bangalore, Karnataka, India Karnataka, India Karnataka, India Karnataka, India
Karnataka, India
Abstract:- IoT-primarily based Smart Irrigation II. LITERATURE SURVEY
monitoring with Blynk app can be taken into
consideration to reveal development of herbs, shrubs 1. Smart watering system for garden using WSN
and trees. Many human beings are fascinated in The first paper was proposed by Mr. Ahmad Hussain
developing the plant life, but continually neglect about in the year of 2014. This paper discusses the usage of WSN
on watering plants. Hence, the tool is prepared with in irrigation management by a sensible watering system
water pump, in which it is able to be monitor and during which the irrigation method is controlled by valves.
manage with the aid of cellular phone. It helps to utilize water resources very efficiently.
In addition, the gadgets additionally encompass 4 2. Efficient Design of a Low-Cost Portable Weather
primary sensors. This IoT-primarily based Smart Station
Irrigation monitoring with Blynk app can report the The second paper was proposed by Mr. Asif Imtiaz in
information and ship the end result to person via the the year of 2018. This paper presents the implementation of
clever phone application i.e., Blynk App. This study is Arduino meteorological observation post that was designed
beneficial, and the machine may be without difficulty in order that individuals can monitor real time weather
controlled with the aid of using all customers such as knowledge victimization this weather station. The aim of
researcher or farmer, and children. this project is to style such a weather station at a less
expensive value which will take a true data of temperature,
I. INTRODUCTION pressure, wetness and wind speed from the weather station.
In the generation of IoT, it’s now our wish to carry or III. PROPOSED SYSTEM
manipulate the entirety over net. Supervising and controlling
devices along with nodes and sensors remotely saves both Automation offers consolation to humans through
revenue and time. Many people have garden in their houses. decreasing guide painting and to enhance the general
Convenient quantity of water along with normal temperature performance device without the consumer interaction. The
is essential for plant life. We need to provide preference to vital parameters for first-class and productiveness of plant
water plant life in lawn whilst required. We are going to boom are soil and air temperature, humidity, sunlight, soil-
display the temperature and moisture level of soil. If the moisture.
water content in soil is much limited than needed through
plant life, a self-sustaining transfer will begin the water Information to the consumer approximately the plant
pump for watering the plant life. User can display and fitness and boom can be furnished to the consumer through
manipulate the lawn now through his mobile or cellular constantly tracking and recording these lawn parameters. It
phone, computing device and laptop. affords a higher expertise of the way every parameter
impacts the boom of plants.
The proposed IoT tool additionally could be carried
out with a climate station sensor, in which it may display Sensors capable of sensing moisture level, temperature
and expect the rainfall each day. Hence, consumer can and humidity are used. The lawn may be at once monitored
transfer the automated water-motor for lowering the usage and managed through the proprietor of the lawn thru their
of water. The accrued statistics also can be given thru on- clever smart phone with the usage of IoT.
line cell applications.
IJISRT21JUL1220 www.ijisrt.com 1353
Volume 6, Issue 7, July – 2021 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
IV. METHODOLOGY
Components of smart irrigation are shown below.
Fig 1: Smart irrigation System-Block diagram.
1. Components
A. Microcontroller Fig 3: System Flow Design
1) Information can be gathered with help of sensors and can
be shipped through Blynk app. 3. Flow Diagram
2) To display information through LCD screen, Arduino Initially, the consumer starts off evolved with the aid
UNO is used. of using beginning the tool, and the underlying vicinity are
B. Actuator examined with the aid of using a built tool. The tool
1) As plants need light, artificial light can be used for analyzes the lawn vicinity and attempts to fetch the
photosynthesis process with LED Light. described real-time parameter values with the aid of using
2) For watering plants, pump is used. the use of included sensors. If the data are efficiently
C. Sensor fetched, the tool gets admission to community. Otherwise,
1) Moisture level of soil is detected through moisture sensor. the tool is made to restart, which deals with the problem. If
2) Temperature and humidity is measured with DHT11. the tool located a community connection, then the retrieved
D. Blynk Apps effects are introduced through cellular application. If there's
To work on IoT, Blynk App is used. It has graphical any hassle to connect with the community, it's going to
interface. The idea of this utility is via way of means of drop attain out to cease till and except community get admission
and drags the widgets. to is determined.
2. The Flow of The System
Fig 2: Blynk System Principle
Blynk server will checks for net connection, the
NodeMCU code consists of hotspot and pass code.
Remaining techniques are simply instructions dispatched
from Blynk software to NodeMCU to manipulate masses the
Fig 4: System Flow Diagram
ones are related to relay package as proven in diagram
below.
IJISRT21JUL1220 www.ijisrt.com 1354
Volume 6, Issue 7, July – 2021 International Journal of Innovative Science and Research Technology
ISSN No:-2456-2165
V. RESULTS AND DISCUSSION
This segment is divided into 3 phases. Phase 1 is
related to practical trying out on additives within side the
hardware design. Phase 2 plays an important role in
integration for all hardware additives. In Phase 3, gadget
trying out is accomplished and accumulated statistics from
the gadgets may get entry to via the cell apps.
A. Phase 1: Sensor check with Data Analysis
Phase 1 is wherein the all-hardware additives might be
examined and a few evaluations is achieved primarily based
totally at the end result from the additives. There are 4
assessments implemented to the hardware design.
Fig 6: Sensor data reading in Blynk Apps.
B. Phase 2: Smart Garden with Weather Station without
Online Apps-Integration Test
For phase 2, all of the gadget might be incorporated VI. CONCLUSION & FUTURE WORK
however now no longer but related to the internet. Figure
indicates the prototype of the IoT primarily based totally The proposed approach of smart irrigation monitoring
Smart Garden with Weather Station devices. is based upon mobile computing, microcontroller and
NodeMCU and the internet of things. It provides real-time
statistics of garden environmental factors, so the local users
and gardeners treat their garden or farm in a well manner.
The results are delivered through a mobile application.
Smart garden with Internet of Things (IoT) based
NodeMCU ESP8266 Module can be designed with various
components hardware and software support so that it can be
arranged into a smart garden system that is controlled with
the Blynk android application according to what is intended.
In the future, we will enhance system functionality by
adding an interface for archiving all the historical records.
Fig 5: Sensor data reading in Blynk App.
REFERENCES
C. Phase 3: IoT based Smart Garden with Weather [1]. H. Abbas, G. M. Ahmed, E. A. Ahmed, R. Ahmed,
Station. “Smart Watering System for Gardens using Wireless
At this segment, the relationship among gadgets and Sensor Networks,” 2014.
cellular apps is carried out the use of NodeMCU. The [2]. A. Imtiaz, S. G. Omar, and T. A. Ali, "Efficient
microprocessor can be used as a tool to attach among the Design of a Low- Cost Portable Weather Station," pp.
cellular apps and the sensor. Hence, all accumulated facts 2–8, 2018.
from the sensor may be dispatched to the cellular apps [3]. R. C. Brito and E. Todt, "Development of a Low-Cost
particularly as Blynk Apps. This utility may be downloaded Weather Station Using Free Hardware and Software,"
and utilized in each Android and IOS smartphones. 2017.
[4]. I. Srilikhitha, M. M. Saikumar, N. Rajan, M. L. Neha,
In this project, an android telephone can be used. The and M. Ganesan, “Automatic irrigation system using
accumulated facts of all sensors produce the identical end soil moisture sensor and temperature sensor with
result because of gadgets. However, the hassle got here at microcontroller AT89S52,” 2017 Int. Conf. Signal
the barometric stress. Although the variations are greater Process. Commun., no. July, pp. 186–190, 2017.
than three, in barometric stress it has a totally excessive
effect at the climate. The facts on stress sensor at IoT
gadgets nevertheless stay with 1015 MB, because of this
that that the climate can be constantly Hot Weather. It
cannot expect the climate. The figure below shows the result
from all sensors on Blynk apps.
