Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 90 views

    Readme Awwa Content Pack

    Uploaded by

    Billy Quezada
    This document provides information about an AutoCAD Plant 3D content pack that includes pipes, fittings, and valves based on AWWA standards. It lists over 20 AWWA standards included in the content pack and provides installation and uninstallation instructions. It also notes that some joint and connection types in the content pack are not predefined in AutoCAD Plant 3D and provides guidance on replacing the default connection configuration file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Readme Awwa Content Pack

    Uploaded by

    Billy Quezada
    90 views2 pages
    This document provides information about an AutoCAD Plant 3D content pack that includes pipes, fittings, and valves based on AWWA standards. It lists over 20 AWWA standards included in the content pack and provides installation and uninstallation instructions. It also notes that some joint and connection types in the content pack are not predefined in AutoCAD Plant 3D and provides guidance on replacing the default connection configuration file.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about an AutoCAD Plant 3D content pack that includes pipes, fittings, and valves based on AWWA standards. It lists over 20 AWWA standards included in the content pack and provides installation and uninstallation instructions. It also notes that some joint and connection types in the content pack are not predefined in AutoCAD Plant 3D and provides guidance on replacing the default connection configuration file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    90 views2 pages

    Readme Awwa Content Pack

    Uploaded by

    Billy Quezada
    This document provides information about an AutoCAD Plant 3D content pack that includes pipes, fittings, and valves based on AWWA standards. It lists over 20 AWWA standards included in the content pack and provides installation and uninstallation instructions. It also notes that some joint and connection types in the content pack are not predefined in AutoCAD Plant 3D and provides guidance on replacing the default connection configuration file.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    README – AWWA Pipes, Fittings, and Valves Content Pack

    This content pack includes below pipes, fittings and valves in AWWA standard:
    • AWWA C110 (A21.10-12) - Ductile-Iron and Gray-Iron Fittings
    • AWWA C111 (-12) – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
    • AWWA C115 (A21.15-11) - Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded
    Flanges
    • AWWA C151 (A21.51-09) - Ductile-Iron Pipe, Centrifugally Cast
    • AWWA C153 (A21.53-11) - Ductile-Iron Compact Fittings
    • AWWA C200 (-12) - Steel Water Pipe, 6 In. (150 mm) and Larger
    • AWWA C207 (-13) - Steel Pipe Flanges for Waterworks Service, Sizes 4 in. Through 144 In. (100
    mm Through 3600 mm)
    • AWWA C208 (-12) - Dimensions for Fabricated Steel Water Pipe Fittings
    • AWWA C220 (-12) - Stainless-Steel Pipe, 1/2 In (13mm) and Larger
    • AWWA C221 (-12) - Fabricated Steel Mechanical Slip-Type Expansion Joints
    • AWWA C226 (-13) – Stainless-Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In.
    (13 mm Through 1,800 mm)
    • AWWA C228 (-14) - Stainless-Steel Pipe Flange Joints for Water Service-Sizes 2 In. Through 72 In.
    (50 mm Through 1,800 mm)
    • AWWA C500 (-09) - Metal-Seated Gate Valves for Water Supply Service
    • AWWA C504 (-15) - Rubber-Sealed Butterfly Valves
    • AWWA C507 (-15) - Ball Valves, 6 In. Through 60 In. (150 mm through 1500 mm)
    • AWWA C508 (-09) - Swing-Check Valves for Waterworks Service, 2-In. Through 24-In. (50-mm
    Through 600-mm) NPS
    • AWWA C509 (-15) - Resilient-Seated Gate Valves for Water Supply Service
    • AWWA C515 (-15) - Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
    • AWWA C516 (-14) - Large-Diameter Rubber-Seated Butterfly Valves, Sizes 78 In. (2000 mm) and
    Large
    • AWWA C517 (-16) - Resilient-Seated Cast-Iron Eccentric Plug Valves
    • AWWA C518 (-13) - Dual-Disc Swing-Check Valves for Waterworks Service
    • AWWA C520 (-14) - Knife Gate Valves, Sizes 2 In. (50 mm) Through 92 In. (2,400 mm)
    • AWWA C900 - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In.
    (100 mm Through 1500 mm)
    • AWWA C901 (-08) - Polyethylene (PE) Pressure Pipe and Tubing, ½ In. (13 mm) through 3 In. (76
    mm), for Water Service
    • AWWA C903 (-16) – Polyethylene-Aluminum-Polyethylene (PE-AL-PE) Composite Pressure Pipes,
    1/2 in (12 mm) through 2 in (51 mm), for Water Service
    • AWWA C904 (-16) - Crosslinked Polyethylene (PEX) Pressure Tubing, ½ In. (13 mm) Through 3 In.
    (76 mm), for Water Service
    • AWWA C905 (-10) - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In.
    Through 48 In. (350 mm Through 1,200 mm)
    • AWWA C906 - Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 65 In. (1,600
    mm), for Waterworks
    • AWWA C907 (-12) – Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4In. Through 12
    In. (100 mm Through 300 mm), for Water, Wastewater, and Reclaimed Water Service
    • AWWA C909 - Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100 mm),
    and Larger

    For questions about this content pack, please contact:

    Plant Content Team

    plant.content@autodesk.com

    Installation notes:

    These catalogs are compatible with AutoCAD Plant 3D 2019 and higher versions. This installer will copy
    “AWWA Pipes and Fittings.pcat” and “AWWA Valves.pcat” into your content catalog location:

    ▪ C:\AutoCAD Plant 3D Content\ CPak AWWA\

    Uninstallation notes:

    To uninstall this content pack, please go to Control Panel => Programs and Features => select the
    "Cpak AWWA 2022” => Uninstall

    Additional Information:

    In these catalogs, there are some joints and connection types which are not existing in the software, you
    can either create by yourselves or use ‘DefaultConnectorsConfig.xml’ from CPak ASME to replace the
    one under the project file.

    Please backup your ‘DefaultConnectorsConfig.xml’ if it was customized.

    How to get the ‘DefaultConnectorsConfig.xml’ file:

    1. Open the ASME Content Packs in AppStore


    (https://apps.autodesk.com/PLNT3D/en/Detail/Index?id=2219699782950798596&appLang=en
    &os=Win64)
    2. Download the file to any place
    3. Extract the file and get the ‘DefaultConnectorsConfig.xml’.

    You might also like