RESUME – DINESHKUMAR VIDI RAVINDRAN

DINESHKUMAR VIDI RAVINDRAN

ELECTRICAL & INSTRUMENTATION ENGINEER
Senior E&I Engineer with 19+ years of experience in instruments
up keeping, overhauling and investigating the issues for complex fixes.
Keen ability to improve maintenance & troubleshooting activities at
field, increasing efficiency and decreasing the need for re-engineering.
Testing & commissioning of 66/33/11/6.6/3.3 KV & 415V
substation, control & protection scheme checking, testing of protective
relays, cable schedule preparation; Executing the schematic diagrams
vrdinesh@gmail.com as build modification & interlock diagram as per site requirement.
Steep knowledge of LV & HV cable testing & termination work
+91 – 86108 43415 planning with LV & HV jointers; pilots cable testing & verification end
to end test, EHV Cable sheath test of 132 KV Cable & preparation site
documents.
India
Expertise in selection of cable type, cable size, cable glands, MCT,
lighting fixtures and its accessories for safe & hazardous zones, cable
https://www.linkedin. trench/tray loading details, designing of trench/tray sizes considering
com/in/dineshkumar- future expansion and permissible tolerance specified in job/client
v-r-68118023 specifications.
Profoundly flexible expert with supervisory abilities in driving
group for top notch execution and objective accomplishment by
process enhancements for more noteworthy effectiveness & efficiency.
Hands on experience & Knowledge in ICAPS, Aramco, TOTAL
Specification’s in SATORP Project, Saudi Arabia.
Initiated capital improvement projects up $10M USD from design
to start-up, with attention given to cost-control.
Sound knowledge of the Following Systems:
SKILLS – SET PLC: Allen Bradley, Siemens, ABB
DCS: Foxboro, Honeywell TDC3000, Yokogawa Centum VP 5.1, Siemens
Project
Vibration Monitoring Systems: Bentley Nevada – 3300 & 3500
Engineer (E&I)
Analyzers: GC (ABB), O2 Combustible (ABB & YEA), PIONA GC (ABB)
Project Electrical: Switchgear system (Toshiba, ABB, SchniderElectric),
Management Motors ,VSD,MCC etc.
Safety PLC: SBM System, ESD(Triconex & HIMA) system
Contract Other System: Building CCTV & Card access system (Lenel)
Negotiations
Compressors: Ingersoll Rand Instrument Air Compressor, Atlas Copco
Instrument Air & Ariel Gas JKT, JGT, Overhead, Recovery Compressor
Pre -
Commissioning Calibration of Analog, Smart, Transmitters, Pressure, Temperature,
Differential pressure using Hart communicators - 375 & 475 Series.
Installation Pressure Calibrators: Multi-Function Calibrator (Druck UPS II,
& Commissioning Yokogawa, Fluke 718, Druck 610/615)
Sound Knowledge of Local & International Standards – Local CP,
FEED & NEC, IEC, ANSI & IEEE Standards.
Detail Engineering
CAREER OBJECTIVE: Seeking for an executive-level assignment in
Start-Up Project Management (E&I) domain in Oil & Gas / Petrochemical/EPC
Operations
Industry to hone my technical and managerial skills.
 RESUME – DINESHKUMAR VIDI RAVINDRAN

Maintenance EXPERIENCE
Activities
SENIOR PROJECT ENGINEER Nov. 2013 – Sep. 2020
Testing WORLEY ENGINEERING SINGAPORE PTE LTD.
Activities (ECR GROUPS FROM JACOBS), SINGAPORE
Troubleshoot CLIENT: EXXONMOBIL ASIA PACIFIC PTE LTD, SINGAPORE
Analysis PROJECTS UNDERTAKEN:
 ABB CCR ANALYZERS ENCLOSED HOUSE PROJECT
Process  LENEL CARD ACCESS SYSTEM & CCTV SYSTEM
Improvements (UPGRADING) PROJECTS
Material  DCS YOKOGAWA C3000 MMI UPGRADE TO CENTUM VP
Management PROJECT
 INSTALLATION OF O2 & COMBUSTIBLE ANALYZER
Team PROJECTS
Management
 INSTALLATION OF YOKOGAWA GC ANALYZER & ABB GC
PROJECTS
QA/QC
Management  LHDC RUN LENGTH EXTENSION PROJECT (TURNAROUND-
2017)
Safety  INSTRUMENT AIR COMPRESSOR OBSOLETE CONTROLLER
Management UPGRADE PROJECT

Risk  JAR ACCS UOP PAREX UPGRADE PROJECT

Management (TURNAROUND-1Q19)
 NORTH FLARE PILOT ENHANCEMENT PROJECT
Internal (TURNAROUND-1Q19)
Audits
 JURONG FLARE ADEQUACY PROJECT-PHASE-1
(TURNAROUND-1Q2019)
Reports &
Documentation  SAR PC01/02/03 & AC40 UPGRADE FROM BN3300 TO
BN3500 PROJECT (SAR TURNAROUND-2Q2019)
Planning &
Organizing PROJECT ENGINEER Jan. 2008 – Oct. 2013
ROTARY ELECTRICAL & INSTRUMENTATION PTE LTD, SINGAPORE
Problem
PROJECTS UNDERTAKEN:
Solving
 SAUDI ARAMCO TOTAL REFINERY PROJECT (SATORP),
PACKAGE 6 TF
SAP
 AIRLIQUIDE, SUPPLY & INSTALLATION OF TECHNICAL
AutoCAD ENCLOSURE (TE)
 YANSAB (SAUDI), YOKOGAWA, SINGAPORE, REMOTE
Primavera INSTRUMENT BUILDING (RIB)

MS Project  EXXON MOBIL (JERNEH-B, MALAYSIA)

 NEW HYDRID SOLAR POWER SYSTEM FOR SATELLITE GAS
MS – Office PLATFORM
 YOKOGAWA, SINGAPORE, SUPPLY & INSTALLATION OF
Leadership
SAFETY & ALARM PLC PANELS- PROJECT ENGINEER
Presentation MAINTENANCE ENGINEER (ELECTRICAL) Jul. 2005 – Dec. 2007
BITUMAT COMPANY LTD, DAMMAM, SAUDI ARABIA
 RESUME – DINESHKUMAR VIDI RAVINDRAN

SENIOR SYSTEM ENGINEER Jul. 2004 – Mar. 2005

Time AUTONUM CONTROLS SAUDI ARABIA, DAMMAM, SAUDI
Management ARABIA

Interpersonal SERVICE ENGINEER Mar. 2003 – Jul. 2004

Comm. AUTONUM CONTROLS PVT. LTD., MUMBAI, INDIA

SERVICE ENGINEER Oct. 2001 – Feb. 2003

ANJALI ELECTRONICS SERVICES (OTIS ELEVATOR), INDIA
EDUCATIONAL
Key Responsibilities Includes
QUALIFICATION
BACHELOR OF
ENGINEERING
• 1998 – 2001•
MADURAI KAMRAJ
UNIVERSITY
Completed my B. E in Project Planning Installation & Liaise with Reports &
Electrical & Electronics & Management Commissioning Clients Documentation
Engineering with First Class.
 Prepare & participating the tender documents along with
DIPLOMA evaluate the contractor bids for multiple projects
• 1995 – 1998 •  Provide design consulting solutions encompassing all electrical
K.L.N.M POLYTECHNIC design processes for several facilities within the client department.
TAMILNADU, INDIA
Completed my Diploma in  Review of vendor drawings and electrical design specification
Electronics & Communication and details; Performed reliability/maintainability analyses of
Engineering with First Class. subcontractor electrical designs and evaluation and identified
potential points of failure.
PROFESSIONAL  Performing instrumentation and electrical designs (Single Line
CERTIFICATIONS diagram – SLD) for new construction and plant modifications;
Specified power and control devices to accomplish electrical
design by lead electrical engineers.

 Review of all instrument acceptance documents such as

Instrument Loop Diagram (ILD), Piping & Instrument Diagram
(P&ID), Instrument Location Layout (PLOT PLAN), Instrument
Process, Instrument Data Sheet, Vendor Document etc.
 Building Construction
Supervisor Safety  Preparation of pre-com and commissioning check sheets and
Course, Singapore (BCSS) coordinate with clients for approval; Finalize content of pre
commissioning and commissioning dossiers of the same.
 Oil Petrochemical Safety
Supervisor Course,  Pre-commissioning, Commissioning, Startup Operation and
Singapore (OPSOC) maintenance on system & module such as fire and gas, safety
instrumented system (SIS), emergency shutdown (ESD), process
 P6 Planner Course, shutdown (PSD), process control system (PCS).
Singapore.
 Responsible for stewarding contractor’s performance,
 Permit to Work (PTW) in engaging/ aligning key stakeholders, engaging discipline engineers
ExxonMobil and expert resources from the global experts, as required, to
complete the assigned scope consistent with the objectives.
 PLC Programming
Training, Chennai  Oversee FEED level engineering, procurement, execution
planning through to completion and start up; Participates in
 RESUME – DINESHKUMAR VIDI RAVINDRAN

ACHIEVEMENTS identification and sourcing and management of long lead

equipment; Identifies issues and coordinates its resolution.
 Awarded the Best Award of
Excellence in the month of  Coordinate construction activities, loop checking & turnover;
October 2019 for Manage Management of Change process to ensure changes are
contributions to appropriately reviewed, approved and documented.
ExxonMobil Efficiency.
 Perform calculations for equipment sizing, cable sizing,
 Certification of lighting, grounding & heat; Assist in preparation of specifications,
Recognition for 5 years of data sheets, cable schedules and load.
service in Jacobs
Engineering  Create I/O lists for Electrical and Automation; Prepare
engineering calculations, specifications and requisition packages -
 Certificate of appreciation verifying content, proper assembly, thorough checking, and issue
from ExxonMobil SAR1 to Senior or Lead for review/approval.
Plant for SAR1 Air
Compressor Upgrade  Review Vendor data to assure specifications such as Instrument
Project Loop Diagram (ILD), Piping & Instrument Diagram (P&ID),
Instrument Location Layout (PLOT PLAN), Instrument Process &
HOBBIES F&G hook drawing, Instrument Data Sheet, Vendor Document etc.

 Responsible for site inspection & final walkdown with client &
engineer, FAT & SAT for all electrical, instrumentation control &
safeguarding system.

 Formulate a plan, review and analyze preventive maintenance

Reading Articles strategy for the equipment instrumentation in order to achieve
Related to Field highest efficiency of the activities for reliable and safe operation.

 Provide technical advice during troubleshooting and corrective

action of instrument breakdown or failures to find the root cause
and best solution in order to restore the functionality back to
Playing Chess normal.

 Attend to technical query by operation personnel and provide

advice/solution according to best engineering practice to address
issues which affect the operation.

 Monitor spare parts & inventory for critical instrumentation

Playing Badminton to ensure availability when required in order to minimize
production interruption. Establish new inventory/cataloging
where necessary.
PERSONAL DETAILS
Date of Birth: April 18, 1980  Provide technical input in full cycle of procurement processes
for contract, materials and service requisition where required so
Languages Known: that all technical requirements are addressed properly to protect
English, Hindi, Tamil & Sourashtra company interest.
Nationality: Indian
 Recommends updates/revisions to policies and procedures
Marital Status: Married based on field observations where procedures may not be followed
Address: 24D, Karapattari Street, because they are unclear, incorrect, or non-existent.
Balarangapuram, Madurai
 Improving safety policies & procedures and Ensure Safe
625009, TamilNadu
working environment etc.
Passport No.: S XXXX928
Date of Expiry: 28/08/2028 Dineshkumar Vidi Ravindran