Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 633 views

    DiagBox v7 83

    Uploaded by

    John Vereda
    The document provides instructions for installing and updating Diagbox software to version 7.83. It explains that the software must be run from the provided DVD and updates should not be done online. The user is directed to install Diagbox, activate it manually, then run 12 update processes, restarting after each one and closing Diagbox before running the next update. The passwords provided are listed. The user is warned to never connect to the internet while using Diagbox.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    DiagBox v7 83

    Uploaded by

    John Vereda
    633 views2 pages
    The document provides instructions for installing and updating Diagbox software to version 7.83. It explains that the software must be run from the provided DVD and updates should not be done online. The user is directed to install Diagbox, activate it manually, then run 12 update processes, restarting after each one and closing Diagbox before running the next update. The passwords provided are listed. The user is warned to never connect to the internet while using Diagbox.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing and updating Diagbox software to version 7.83. It explains that the software must be run from the provided DVD and updates should not be done online. The user is directed to install Diagbox, activate it manually, then run 12 update processes, restarting after each one and closing Diagbox before running the next update. The passwords provided are listed. The user is warned to never connect to the internet while using Diagbox.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    633 views2 pages

    DiagBox v7 83

    Uploaded by

    John Vereda
    The document provides instructions for installing and updating Diagbox software to version 7.83. It explains that the software must be run from the provided DVD and updates should not be done online. The user is directed to install Diagbox, activate it manually, then run 12 update processes, restarting after each one and closing Diagbox before running the next update. The passwords provided are listed. The user is warned to never connect to the internet while using Diagbox.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    IT WILL NOT WORK WITH ANY 64-bit WINDOWS or WINDOWS 10, don't have any ANTI VIRUS/FIREWALL installed

    YOU WILL NEED .netFrameworks with all updates with Microsoft, Java and all drivers up to date

    It is important that you update fully or you will have issues Diagbox v7.01 MUST be run off this DVD

    1. Install DiagBox v7.01, UNBLOCK ALL THAT WINDOWS TRIES TO STOP. ALLOW DRIVERS & PROGRAMS

    Run v7.01 off this DVD by placing in the DVD drive, it will autorun. Choose language and follow install instructions

    2. Activate the DiagBox using manual method. First screen - choose customer code 1234567, press the tick

    Second screen both boxes should be filled in already, press the tick. YOU MUST BE CONNECTED TO THE INTERNET

    3. Diagbox now will load all information for Lexia 3 & PP 2000. Diagbox will then restart its self and now ask for
    some details. Enter whatever you want it does not matter but you have to put something in * boxes

    DISCONNECT FROM THE INTERNET & DO NOT CONNECT AGAIN WHEN DOING UPDATES OR USING DIAGBOX

    4. Diagbox is now activated to v07.01, Now close down Diagbox and run it again It will update to v7.02

    It will say In-stalling online updates with a bar going across the bottom of the box

    This is fine

    These are online updates which have already been download for you

    You do not need to have the interface connected to the laptop when doing the updates

    If Diagbox does not open showing v7.02 but says Internet updates failed to load, close this and run Diagbox again

    DO NOT ALLOW Diagbox to update online inside Diagbox

    ONLY USE THE UPDATES on this DVD only

    X PASSED it when it's says: Do you wish to search for Updates? Validate to continue

    Close down Diagbox when it opens at v7.02. Updates are on the DVD, there are 8 to do

    Go to My computer, right click the DVD drive and then open, double click to run the update

    You can copy and paste the updates and run from your HDD or USB drive

    The updates are in French. Press Suivant, when loaded. Press Quitter and then Redemarrer to restart.

    5. Do the update v7.02 to v7.57

    You need to RESTART the laptop and RUN Diagbox after the installation of EACH of the updates

    Then close Diagbox and run the next one. One by one, VERY IMPORTANT

    After each update Diagbox will open and show the version number in the top right corner

    If it does not then restart your laptop and run Diagbox again, do not run another update until the version number
    comes up
    6. Repeat with the update v7.57 to v7.78 7. Repeat with the update v7.58 to v7.62

    8. Repeat with the update v7.62 to v7.66 9. Repeat with the update v7.66 to v7.74

    10. Repeat with the update v7.74 to v7.76

    If when doing these updates if Diagbox de-activates, I have found it happens on some laptops, then you will have
    to turn your User account control (UAC) to minimum setting

    You do this in the Control Panel and under security settings

    Run these last two updates on administrator privilege or they will not work

    11. Repeat with the update v7.76 to v7.82 Password : Maitresox01

    12. Repeat with the update v7.82 to v7.83 Password : Very Simple!

    PP2000 and Lexia will change to French you will need to change back to your language using the instructions in the
    Change language file on the DVD. Diagbox will stay on the language you picked at loading

    VERY IMPORTANT: WHEN YOU ARE USING DIAGBOX, NEVER BE CONNECTED TO THE INTERNET AT ANYTIME

    If you have any problems then contact me. I have loaded this software 100’s of times

    You might also like