Civil Engg - Option II TY Syllabus0

Government College of Engineering Jalgaon
“Globally Accepted Engineers with Human Skills”

(An Autonomous Institute of Government of Maharashtra)
Civil Engineering Department

Third Year BTech Syllabus (Option II)
2020-21
GOVERNMENT COLLEGE OF ENGINEERING, JALGAON
Scheme for Semester I of B. Tech. (Elect/Comp/Civil) with effect from academic year 2018-19
Teaching Scheme* Evaluation Scheme
Course
Name of the Course Group Hrs /Week Theory Practical Credits
Code Total
L T P Total MSE ISA ESE ICA ESE
SH100AU Induction Program Mandatory audit course of three weeks duration as per AICTE model curriculum AU
SH101U Differential Calculus BS 3 1 -- 4 30 10 60 -- -- 100 4
SH102U Engineering Chemistry BS 3 -- -- 3 30 10 60 -- -- 100 3
Elements of Electrical
EE101U BE 2 -- -- 2 30 10 60 -- -- 100 2
Engineering
Programming for Problem
CO101U BE 3 -- -- 3 30 10 60 -- -- 100 3
Solving
SH104U Communication Skills HM 1 -- -- 1 15 05 30 -- -- 50 1
SH105U Communication Skills Lab HM -- -- 2 2 -- -- -- 50 -- 50 1
ME101U Mechanical Workshop Practices BE -- -- 2 2 -- -- -- 50 -- 50 1
SH103U Engineering Chemistry Lab BS -- -- 2 2 -- -- -- 50 -- 50 1
Elements of Electrical
EE102U BE -- -- 2 2 -- -- -- 50 -- 50 1
Engineering Lab
Programming for Problem
CO102U BE -- -- 2 2 -- -- -- 50 -- 50 1
Solving Lab
Total 12 1 10 23 45 135 270 250 -- 700 18
* Commencement of first semester of UG engineering program is generally delayed by 4 - 5 weeks as compared with higher semesters due to admission
procedure. In addition, as per AICTE directives there is Induction Program of three weeks at the beginning of first semester. Thus the effective teaching in
first semester may be only for 8 – 9 weeks. Therefore, one hour per week theory / laboratory teaching should be added in the regular load shown in the
curriculum structure so that the syllabus can be completed in 8 - 9 weeks available in first semester of UG program.
L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

MSE: Mid Semester Examination ESE: End Semester Examination, ICA: Internal Continuous Assessment
Note: 1. ESE (TH) duration for SH104U is two hours and that for all other theory courses is three hours.
2. MSE (TH) duration for SH104U is one hours and that for all other theory courses is two hours
3. Group indicates curriculum component as defined earlier.
Scheme for Semester II of B. Tech. (Elect/Comp/Civil) with effect from academic year 2018-19
Teaching Scheme Evaluation Scheme

Course
Name of the Course Group Hrs /Week Theory Practical Credits
Code Total
L T P Total MSE ISA ESE ICA ESE
SH151U Integral Calculus BS 3 1 -- 4 30 10 60 -- -- 100 4
SH152U Engineering Physics BS 3 -- -- 3 30 10 60 -- -- 100 3
ME151U Engineering Drawing and Drafting BE 3 -- -- 3 30 10 60 -- -- 100 3
Basic Electronics and
ET151U BE 3 -- -- 3 30 10 60 -- -- 100 3
Measurement Techniques
CE151U Engineering Mechanics BE 3 1 -- 4 30 10 60 -- -- 100 4
ME152U General Workshop Practices BE -- -- 2 2 -- -- -- 50 -- 50 1
SH153U Engineering Physics Lab BS -- -- 2 2 -- -- -- 50 -- 50 1
Engineering Drawing and Drafting
ME153U BE -- -- 2 2 -- -- -- 50 -- 50 1
Lab
Basic Electronics and
ET152U BE -- -- 2 2 -- -- -- 50 -- 50 1
Measurement Techniques Lab
CE152U Engineering Mechanics Lab BE -- -- 2 2 -- -- -- 50 -- 50 1
SH150AU Environment Science - -- -- -- NA NA 60 -- -- 60 AU
Total 15 2 10 27 150 50 400 250 -- 810 22

Note: 1. ESE (TH) duration for ME151U is four hours and that for all other theory courses is three hours.
2. MSE (TH) duration for all theory courses is two hours
Scheme for SEM III of B. Tech. (Civil Engineering) 2018-19
Course
Name of the Course Group Hrs /week Theory Practical Credit
Code Total
L T P Total ISA MSE ESE ICA ESE
CE201U Introduction to Civil Engineering HM 2 -- -- 2 10 30 60 -- --- 100 2

CE202U Basic Surveying PC 3 -- --- 3 10 30 60 --- --- 100 3
CE203U Concrete Technology PC 3 -- --- 3 10 30 60 --- --- 100 3
CE204U Building Planning and Construction PC 3 -- --- 3 10 30 60 --- --- 100 3
CE205U Strength of Materials PC 3 -- --- 3 10 30 60 --- --- 100 3
CE206U Engineering Geology BS 3 -- --- 3 10 30 60 --- --- 100 3
CE207U Basic Surveying Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE208U Concrete Technology Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE209U Building Planning and Construction Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE210U Computer Aided Civil Engineering PC
-- 2 2 -- -- -- 50 -- 50 1
Drawing Lab
CE211U
Engineering Geology Lab BS -- -- 2 2 -- -- -- 25 25 50 1
SH200AU Essence of Indian Traditional
HM -- -- -- -- NA NA 60 0 0 60 AU
Knowledge
Total 17 -- 10 27 60 180 420 150 100 910 22

Note: 1.ESE (TH) duration for CE204U is four hours and for all other theory courses is three hours.
2.MSE (TH) duration for all theory courses is two hours
Scheme for SEM IV of B. Tech. (Civil Engineering) 2018-19
Course Grou
Name of the Course Hrs /week Theory Practical Credit
Code p Total
SH296U Advanced Engineering Mathematics HM 3 -- --- 3 10 30 60 --- --- 100 3
CE251U Fluid Mechanics PC 3 -- --- 3 10 30 60 --- --- 100 3
CE252U Water Treatment and Processes PC 3 -- - 3 10 30 60 --- --- 100 3
CE253U Basic Theory of Structures PC 3 - --- 3 10 30 60 --- --- 100 3
CE254U Hydrology and Irrigation PC 3 -- -- 3 10 30 60 --- --- 100 3
Civil Engineering- Societal and Global
CE255U HM 2 -- --- 2 10 30 60 --- --- 100 2
Impact
CE256U Fluid Mechanics Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE257U Water Treatment and Processes Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE258U Testing of Materials Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE259U Hydrology and Irrigation Lab PC -- -- 2 2 -- -- -- 25 25 50 1
-- 2 2 -- -- --
SH299U Effective Technical Communication HM 25 25 50 1
SH250AU Introduction to the Constitution of India CM -- -- -- -- NA NA 60 -- -- 60 AU
Total 17 - 10 27 60 180 420 125 125 910 22

Note: 1.ESE (TH) duration for all theory courses is three hours.
4. Professional Internship of minimum 6 week duration (minimum 2 weeks in one visit) shall be completed during summer and winter
vacation after the IV semester onward and will be asses in VIII semester.
Scheme for SEM V of B. Tech. (Civil Engineering) 2018-19
Course
Code Total
CE301U Dams and Hydraulic Structures PC 3 -- --- 3 10 30 60 --- --- 100 3
CE302U Design of RCC Structures PC 3 -- --- 3 10 30 60 --- --- 100 3
CE303U Transportation Engineering PC 3 -- --- 3 10 30 60 --- --- 100 3
CE304U Professional Elective -I PE 3 -- --- 3 10 30 60 --- --- 100 3
CE305U Open Elective-I OE 3 -- --- 3 10 30 60 --- --- 100 3
CE306U Construction Management PC 3 -- -- 3 10 30 60 -- -- 100 3
CE307U Design of RCC Structures-Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE308U Dams and Hydraulic Structures Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE309U Transportation Engineering Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE310U Professional Elective –I Lab PE -- -- 2 2 -- -- -- 25 25 50 1
Organizational Behavior /Finance &
SH496U Accounting / Other equivalent HM -- -- -- -- -- -- -- -- -- 60 3
management course
Total 18 -- 8 26 60 180 360 100 100 860 25
Professional Elective -I Open Elective I
A. Hydraulic Engineering X. Building Construction Practice
B. Construction Practice Y. Repair and Rehabilitation of Buildings
C. Earthquake Engineering
D. Architectural Planning and Interior Designing
Note: 1. ESE (TH) duration for CE302U is four hours and for all other theory courses is three hours.
4. SH 496U - Credit transferred from Online NPTEL / SWAYAM /MOOC advance course offered by Indian institute and approved by BoS
(Civil) Chairman
Scheme for SEM VI of B. Tech. (Civil Engineering) 2018-19
Course
Code Total
CE351U Advance Theory of Structures PC 3 -- -- 3 10 30 60 --- --- 100 3
CE352U Geotechnical Engineering PC 3 -- --- 3 10 30 60 --- --- 100 3
CE353U Design of Steel Structures PC 3 -- --- 3 10 30 60 --- --- 100 3
CE354U Professional Elective -II PE 3 -- --- 3 10 30 60 --- --- 100 3
CE355U Open Elective - II OE 3 -- --- 3 10 30 60 --- --- 100 3
CE356U Disaster Preparedness & Planning
HM 3 -- --- 3 10 30 60 --- --- 100 3
Management
CE357U Geotechnical Engineering-Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE358U Design of Steel Structures Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE359U Professional Elective –II-Lab PE -- -- 2 2 -- -- -- 25 25 50 1
CE360U Software Engineering -Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE361U Minor Project PS -- -- 2 2 -- -- -- 50 50 1
CE451U Professional Elective -IV PE -- -- -- -- -- -- -- -- 60* 60* 3
Total 18 -- 10 28 60 180 360 150 100 850 26
Professional Elective -II Professional Elective -IV Open Elective II
A. Advanced Surveying A. Railway, Tunnel and Airport Engineering X. Industrial Pollution and Control
B. Rehabilitation of Structures B. Geo-synthetic Engineering Y. Safety and Disaster Management
C. Prestressed Concrete C. Environmental Geo-Technology
D. Irrigation Systems D .Construction Equipment and Automation
E. Other course offered by NPTL/MOOC/SWAYAM and approved by department
Note: 1. ESE (TH) duration for CE353U is four hours and for all other theory courses is three hours.
2.MSE (TH) duration for all theory courses is two hours.
4. CE451U - Credit transferred from Online NPTEL / SWAYAM /MOOC advance course offered by Indian institute and approved by BoS (Civil) Chairman
* If students fail in online exam, then ESE will be conducted.

Scheme for SEM VII of B. Tech. (Civil Engineering) 2018-19
Course Grou
Name of the Course Hrs /week Theory Practical Credit
Code p Total
CE401U Environmental Engineering PC 3 -- --- 3 10 30 60 --- --- 100 3
CE402U Foundation Engineering PC 3 -- --- 3 10 30 60 --- --- 100 3
CE403U Engineering Economics, Estimate and Costing PC 3 -- -- 3 10 30 60 -- -- 100 3
CE404U Professional Elective -III PE 3 -- --- 3 10 30 60 --- --- 100 3
CE405U Open Elective - III OE 3 -- --- 3 10 30 60 --- --- 100 3
CE406U Environmental Engineering -Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE407U Foundation Engineering-Lab PC -- -- 2 2 -- -- -- 25 25 50 1
CE408U Engineering Economics, Estimate and Costing -
PC -- -- 2 2 -- -- -- 25 25 50 1
Lab
CE409U Professional Elective-III-Lab PE -- -- 2 2 -- -- -- 25 25 50 1
CE410U Industrial Lectures PS 1 ---- 1 -- -- -- 50 -- 50 1
CE452 Professional Elective -V PE -- ---- -- -- -- 60* -- 60* 3
CE453
U Professional Elective - VI PE -- ---- -- -- -- 60* -- 60* 3
U Total 16 -- 8 24 50 180 420 150 100 870 26
Professional Elective -III Professional Elective -V Professional Elective -VI Open Elective III
A. Pavement Design A. Bridge Engineering A. Structural Health Monitoring and Auditing X. Interior Design
B. Advanced R.C.C B. Advanced Foundation Engineering B. Ground Improvement Techniques Y. Metro System and Engineering
C. Air and Noise Pollution C. Advance Design of Steel Structures C. Finite Element Analysis
D. Building System and Services D. Solid and Hazardous Waste Management D. Formwork and Support System Design
E. The advance course offered by E. The advance course offered by
/SWAYAM and approved by BoS Chairman /SWAYAM and approved by BoS Chairman
4. CE452U and CE453U - Credit transferred from Online NPTEL / SWAYAM /MOOC advance course offered by Indian institute and approved by BoS (Civil) Chairman
* If students fail in online exam, then ESE will be conducted.
GOVERNMENT COLLEGEOF ENGINEERING, JALGAON
Scheme for SEM VIII of B. Tech. (Civil Engineering) 2018-19
Course
Code Total
CE454U Seminar PS --- --- 2 2 -- -- -- 25 -- 25 1
CE456U Professional Internship PS -- -- -- -- -- -- -- 50 -- 50 2
CE457U Project# PS --- -- 6 6 -- -- -- 100 200 300 8
CE457AU Basics of Entrepreneurship HM -- -- -- -- -- -- 60 -- -- 60 AU
CE458AU E-4 Skills HM -- -- -- -- -- -- 60 -- -- 60 AU
Total --- -- 8 8 -- -- 120 175 200 495 11

2. MSE (TH) duration for all theory courses is two hours
3. Group indicates curriculum component as defined earlier. # - Preferably industry/ field based
Open Elective List
Sr No BoS Open Elective-I Open Elective-II Open Elective-III
Heating Ventilation and Air Mechatronics and Applications Operations Research and Project
Mechanical Conditioning Management
1
Department
Electric and Hybrid Vehicle Power Station Engineering Industrial Robotics
Principles of Communication Electronics Instruments and Biomedical Electronics
Systems Measurements
2 E&TC Department
Consumer Electronics Microprocessor and Microcontroller Power Devices and Applications
Programmable Logic Controller Automotive Instrumentation Building Automation

Instrumentation and Distributed Control System
3
Department
Virtual Instrumentation Industrial Measurement Agricultural Instrumentation
Renewable Energy Systems Energy Audit and Conservation Electrification of Buildings
Electrical
4
Department Wind and Solar Power Electrical Engineering Materials Industrial Automation
Professional Ethics and Cyber Internet and Communication Internet of Things

Computer Security Technology
5
Department Android Programming Data Structures and Algorithms Web Design
Building Construction Practice Environmental Laws and Polices Interior Design

6 Civil Department Repair & Rehabilitation of Safety and Disaster Management Metro System and Engineering
Structures
Biology Foreign Language-I Finance and Accounting
Applied Science
7 Foreign Language-II Entrepreneurship Higher Higher Mathematics
Department
Development
CE301U DAMS AND HYDRAULIC STRUCTURES
Teaching Scheme: 03L Total: 3Hr Credit: 03
Evaluation Scheme:30 MSE + 10 ISA + 60 ESE Total Marks:100
Duration of ESE: 03Hrs
Course Description
In this course students are introduced with the topics such as dams, their types and basic
design basics of Gravity dams & Earth dams along with study of Spillways & Diversion
Head works and irrigation canals
Course Objectives
1. To understand design principles of earth and gravity dam.
2. To Know about the basics of design of canals, spillway and weir.
3. To provide knowledge on various types of energy dissipaters.
Course Outcomes
Upon successful completion of this course the students will:
1. compute various stresses developed in gravity dam
2. analyze stability of slopes of earth dams
3. evaluate the essential requirements of the most widely used spillways and design of
efficient stilling basins by following U.S.B.R. and I.S. recommendations.
4. analyze stability of weirs on permeable foundation using Khosla’s theory
Relevance of Program Outcomes (POs) and strength of co-relation

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2
2 3 3
3 2 3
4 3 2
1-Weakly correlated 2 – Moderately correlated 3 – Strongly correlated
Course Content
Dams: Introduction and scope of the subject, types of dams, reservoir storage zones, selection
of site for dam, choice of a dam.
Gravity Dams: Introduction, cross section, forces acting on dam, load combinations as
specified by IS 6512-1984, stresses in dam (normal, principal and shear stresses), modes of
failures, stability analysis and design of gravity dam, elementary and practical profile, low
and high dam, galleries, Joints and keys.
Principle and types of Arch and Buttress dams.
Earth Dams : Introduction, types, elements of earth dam, basic design considerations, causes
of failures, piping and its prevention, control of seepage, drainage in earth dams, phreatic line
– its uses and characteristics, equation, procedure of construction phreatic line for various
cases, stability of upstream and downstream slopes of earth dam under various situations,
Spillways: - Introduction, spillway capacity, different types of spillways and their principles
and suitability, design principles of Ogee spillway, working of siphon spillway. Energy
dissipation below spillway, types of hydraulic jump, jump height curves and tail water rating
curves, various types of energy dissipaters: Indian Standard stilling basins and buckets.
Gates: Uses, types of spillway crest gates.
Diversion Head Works : Introduction, selection of site, layout of diversion headwork and its
components and functions, types of weirs and barrages, causes of failures of weirs on
permeable foundations and remedies, hydraulic design of weir with respect to subsurface
flow, safety against piping and uplift, Khosla’s theories.
Canal systems: Types of canals, alignment of canals, canal losses, estimation of design
discharge, Kennedy’s and Lacey’s theory of regime channels.
Text Books:
1. Irrigation, Water Resources and Water Power Engineering, Modi P.N., Standard Book
House, Delhi, 8th edition, 2012
2. Irrigation Engineering and Hydraulic Structures, Garg S.K., Khanna Publishers,
Delhi, 1998
Reference Books:
1. Engineering Hydrology, Subramanya K, Tata McGraw-Hill Publishing Company
rd
Limited, New Delhi, 3 edition, 2008
2. Irrigation and Water Power Engineering, Punmia B. C., Pande B. B., Lal, Ashok
Kumar Jain, Laxmi Publications Pvt. Ltd., New Delhi, 1999
3. Fundamentals of Irrigation Engineering, Bharat Singh, Nem Chand & Bros, India; 6th
revised edition, 1979
4. Irrigation and Water Resources Engineering, Asawa, G. L, New Age International
Publisher, 1st edition, 2005
5. Theory and Design of Irrigation Structures, Varshney, Gupta & Gupta, Nem Chand &
Bros
CE302U: DESIGN OF RCC STRUCTURES
Teaching Scheme: 3L Total: 3 Hr Credit: 3
Evaluation Scheme: 30MSE + 10 ISA + 60 ESE Total Marks: 100
Duration of ESE: 4 Hrs
Course Description
The primary aim of this course is to provide an introduction to the analysis and design of
reinforced concrete structures, by limit state method conforming to IS 456:2000. The course
covers design of various elements viz. beams, slabs, columns, and footing in RCC. It equips
the students with the tools necessary for designing RCC structures and to familiarize them
with the relevant national design code.
Course Objectives
1. To understand behavior of structural members under various loadings.

2. To understand concept of RCC structural design
3. To conceive elementary deign of different structural elements.
Course Outcomes
After successful completion of this course; student will be able to
1. understand conceptually the difference between Working stress method, Ultimate load
theory method & Limit state Design method.
2. design the structural elements like RCC beam, slab, column, and footings by limit
state design method as per I.S.456-2000.
3. design two way slab & one way continuous slabs
4. design columns & footings for eccentric loads.
5. design RCC Retaining walls & design of water tanks.
Relevance of Program Outcomes (POs)and strength of co-relation

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 2 1 1 1 1
2 1 2 2 3 2 1 2
3 2 2 1 3 2 2 2
4 2 2 2 2 2 1 3
5 1 2 1 2 1 2 2
Course Content
Limit state Design Concept:, Partial safety factors, load factors, stress-strain relationship,
stress block parameters, failure criteria, Use of I.S. 456-2000, Limit state of collapse in
flexure : Design of one way single span and continuous slabs, canopies and two way slabs
with various end conditions using IS code coefficients Design of Singly and Doubly
reinforced Beams, “T” and “L” beams.
Design of fixed beams, propped cantilever, two span symmetric continuous beams. Limit
State of collapse in shear, Bond and Torsion, Design for Interaction between Bending
moment, Torsional moment and Shear. Limit state of serviceability: Deflection and moment
curvature relationship, for beams and one-way slabs.
Limit state of collapse under compression axially loaded short and long column, column with
axial load, uniaxial and biaxial moment, Interaction diagram / Charts. Isolated footing for
axially loaded columns, Uniaxial bending, combined footing: Rectangular footing, Strap
beam and Trapezoidal etc.
Design of portal frames (single bay single storey) hinged or fixed at base. Design of
Cantilever Retaining Walls
Design of Dog legged staircase
Design of Circular and Rectangular water tank with roof slab resting on ground
Text books:,
1. Limit State Design of Reinforced Concrete Structures, Ramchandra, Standard Book
House, 3rd edition, 2014
2. Limit State Theory and Design of Reinforced Concrete, Structures, Karve S. R. and
Shah V. L, Structured Publications, 9th edition, Pune, 2019
3. Reinforced Concrete Structures, Dr. B. C. Punmia and A. K. Jain, Laxmi Publications,
10th edition, New Delhi, 2015
Reference:
1. Limit state design of Reinforced Concrete Structures , Varghese P. C., Prentice Hall
of India, 2008
2. Limit State Analysis and Design, P. Dayaratnram, Wheeler Publishing Company,
Delhi, 12th edition, 2017
3. Reinforced Concrete Design, Pillai Menon, Tata McGraw Hill, New Delhi, 3rd
edition, 2017
4. I.S. 456- 2000: Plain and Reinforced Concrete, Code of Practice, Bureau of Indian
Standards, 2000
5. I.S. 3370-1967: Part I, II and Part IV, Code of Practice for Concrete Structures for
Storage of Liquids, Bureau of Indian Standards, 2009
6. S.P. (16): Design Aids for Reinforced Concrete. (Interaction Charts Only) Bureau of
Indian Standards, 1980
CE303U: TRANSPORTATION ENGINEERING
Course Description
The student will understand the importance & characteristics of road transport for geometric
design of various roads with proper alignment based on planning principles and survey data.
This course will gave the knowledge of highway materials & construction of various types of
roads and identify the problems associated with roads & remedies for same. The purpose of
this course is to provide knowledge on highway planning, geometric design of highways,
highway maintenance and public transportation.
Course Objectives
1. To give the knowledge of planning, design and the fundamental properties of
highway materials in highway engineering
2. To acquire the knowledge of geometric design
3. To expose the concept of different methods in design, construction, inspection and
maintenance of the pavement
4. Undertake various Traffic studies and apply the knowledge to control the traffic
5. Understanding advance urban transport technology
Course Outcomes
1. be able to plan highway network and perform testing on highway material
2. design highway alignments and geometrics
3. analyze and design flexible and rigid pavements
4. design intersections and prepare traffic management plans
5. understand the principles of construction and maintenance of highways

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2 1 3
2 3 3 3 3
3 3 2 3 2 2
4 3 3 3
5 2 2 2
Course Content
Highway Planning and Development: Different modes of transportation, role of highway

transportation, Highway planning in India, 20 year road development plans and its salient
features, determination of road lengths departments in India, road classification, road
authorities i.e. IRC, CRRI, NHAI, PMGSY Program etc., planning surveys, preparation of
plans, final report, master plan, Current road projects in India, Financing of road projects,
Highway Alignment and Geometric Design: highway alignment, cross section, formation
width, land width, design of vertical and horizontal alignment including curves, super
elevation, sight distance, gradients, alignment and geometrics of hill roads.
Road Materials: Aggregates and their types, physical and engineering properties, fillers,
bitumen, characteristics, emulsions and cutbacks, bituminous paving mixes; Portland cement
and cement concrete: soil investigation and test on soil; CBR, plate load test for modulus of
subgrade reaction.
Construction of Roads: Types of highway construction, construction of earth roads, gravel

roads, WBM roads. Bituminous pavements, types, surface dressing, penetration macadam,
built up spray grout, bitumen bound macadam, bituminous carpet, bituminous concrete.
Cement concrete pavements.
Pavement Analysis: Standard axle load and wheel assemblies for road vehicles under carriage
system for aircraft, tire and contact pressure, contact area imprints, computations of ESWL,
flexible pavements-factors affecting design and performance; stresses in flexible pavements;
rigid pavements- components and functions; factors affecting design and performance of CC
pavements; stresses in rigid pavements;
Pavement Design: Design of flexible pavements as per IRC 37-2001 or revised and rigid
pavements by IRC58-2002 or revised.
Traffic Engineering and Control: Road user characteristics, vehicular characteristics, traffic
flow characteristics, speed, traffic volume studies, parking studies-definition, purpose, types,
survey methods, design of parking facility, highway lighting, Accident studies-purpose,
types, causes, collision diagram, condition diagram, preventive measures, Pavement marking,
signs, signals, traffic management, various types of intersection and its design criteria
Highway Maintenance: Pavement failures, causes, failures in flexible pavements and rigid
pavements. Maintenance of highways, routine maintenance, periodic maintenance, special
repairs. Strengthening of existing pavements, evaluation, overlay design. Highway drainage,
surface and sub-surface drainage.
Advanced Urban Transport Technology: Classification, mass and rapid transit system,
introduction to Intelligent Transportation system (ITS), electronic toll collection.
Text books:
1. Highway Engineering, Khanna S. K. CEG Justo and A. Veeraragavan, Nem Chand &
Bros. Roorkee, 10th edition, 2015
2. Principles of Transportation Engineering, Das A. and Chakroborty P., Prentice Hall of
India, 2nd edition, 2012
3. Highway Engineering, Kadiyali L. R., Khanna Books Publishing Co. New Delhi, 1st
edition, 2019
Reference books:
1. Guidance of Design of Flexible pavement, Second Revision- IRC-37-2018
2. Guidelines for the Design of Plain Jointed Rigid Pavements for Highways, 3rd
Revision,IRC:58–2011
3. Highway Material & Pavement Testing, Khanna S. K. and CEG Justo, Nem Chand &
Bros. Roorkee, 5th edition, 2015
4. Highway Engineering, Wright P. H. and Dixon C., John Willey, 7th Edition, 2015
5. Pavement Design and Materials, Papagiannakis A. T. and Masad E. A., John Willey,
1st edition, 2008
6. Principles of Highway Engineering & Traffic Analysis, Mannering F. L., Walter P. K.
And Scott John, 3rd edition, Willey, 2011
CE304U(A) HYDRAULIC ENGINEERING
Teaching Scheme: 03L Total:3Hr Credit: 03
Course Description
This course provides the knowledge of fluid mechanics which includes, study of boundary
layer and fluid flow around submerged bodies. Analysis of turbulent flow in pipes and pipe
flow systems. Analysis of open channel flows: Uniform, critical, gradually and rapidly varied
flows.
Course Objectives
1. To introduce the students to various hydraulic engineering problems like open
channel flows and hydraulic machines.
2. To make able to relate the theory and practice of problems in hydraulic engineering
Course Outcomes: Upon successful completion of this course the students will:
1. apply their knowledge of fluid mechanics in addressing problems in open channels.
2. solve problems in uniform, gradually and rapidly varied flows in steady state
conditions.
3. apply their knowledge to select suitable energy dissipater
4. able to calculate the efficiency of pumps

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2
2 2 2 3
3 3 3
4 2 2
Course Content
Boundary Layer Analysis-Assumption and concept of boundary layer theory. Boundary-layer

thickness, displacement, momentum & energy thickness, laminar and Turbulent boundary
layers on a flat plate; Laminar sub-layer, smooth and rough boundaries. Local and average
friction coefficients. Separation and Control.
Introduction to Open Channel Flow-Comparison between open channel flow and pipe flow,
geometrical parameters of a channel, classification of open channels, classification of open
channel flow, Velocity Distribution of channel section.
Uniform Flow-Continuity Equation, Energy Equation and Momentum Equation,

Characteristics of uniform flow, Chezy’s formula, Manning’s formula. Factors affecting
Manning’s Roughness Coefficient, most economical section of channel. Computation of
Uniform flow, Normal depth.
Non-Uniform Flow- Specific energy, Specific energy curve, critical flow, discharge curve
Specific force Specific depth, and Critical depth. Channel Transitions. Measurement of
Discharge and Velocity – Venturi Flume, Standing Wave Flume, Parshall Flume, Broad
Crested Weir. Measurement of Velocity- Current meter, Floats, Hot-wire anemometer.
Gradually Varied Flow-Dynamic Equation of Gradually Varied Flow, Classification of
channel bottom slopes, Classification of surface profile, Characteristics of surface profile.
Computation of water surface profile by graphical, numerical and analytical approaches.
Direct Step method, Graphical Integration method and Direct integration method.
Hydraulic Jump- Theory of hydraulic jump, Elements and characteristics of hydraulic jump
in a rectangular Channel, length and height of jump, location of jump, Types, applications
and location of hydraulic jump. Energy dissipation and other uses, surge as a moving
hydraulic jump. Positive and negative surges.
Flow through Pipes: Loss of head through pipes, Darcy-Wiesbatch equation, Moody diagram,
minor losses, total energy equation, hydraulic gradient line, Pipes in series, equivalent pipes,
pipes in parallel, flow through laterals, flows in dead end pipes, siphon, power transmission
through pipes, nozzles. Analysis of pipe networks: Hardy Cross method, water hammer in
pipes and control measures, branching of pipes, three reservoir problem.
Pumps: Introduction, function and principles, working of centrifugal pump, efficiency of

pumps
Text Books
1. Hydraulics and Fluid Mechanics Including Hydraulic Machines , Modi S.M. and Seth
S.M, PHI Learning Pvt. Ltd. 20th edition, 2015
2. Fluid Mechanics and Machinery, C. S. P. Ojha, R. Berndtsson and P. N. Chadramouli,
Oxford University Press, 1st edition, 2010
3. Fluid Mechanics and Hydraulics Machines, K. Subramanya, 2nd edition, McGraw
Hill, 2018
Reference Books
1. Engineering Fluid Mechanics Garde R.J. and Mirajgaokar A.G., Scitech Publication 3 rd
edition, 2011.
2. Introduction to Fluid Mechanics and Fluid Machines, Som S. K., Gautam Biswas and
Suman Chakraborty, McGraw Hill Education, 3rd edition, 2011
3. Flow in Open Channel, K. Subramanya, 1st edition, McGraw Hill, 2019
CE304U (B): CONSTRUCTION PRACTICE
Course Description
This course makes a student familiar with the detailed features of various building, bridges
components and appraises about construction practices. The course includes description of
construction practices used for sub structure, super structure of buildings bridges and tunnels.
Course Objectives
1. The main objective of this course is to make the student aware of the various
construction techniques, practices and the equipment needed for different types of
construction activities.
2. At the end of this course the student shall have a reasonable knowledge about the
various construction procedures for sub to super structure.
Course Outcomes
1. identify problems in construction process and find out solution for different field
problems.
2. understand and apply knowledge of latest construction practices and processes for
construction of substructure and superstructure of structural systems.
3. apply latest construction practices for construction of bridges and tunnel construction.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2 1 1 2 1 3 1
2 2 1 2 2 1 1 2 3
3 2 2 1 1 1 1 1 3
Course Content
Construction Techniques: Development of construction techniques, High rise Building

Technology, Eco Building (Green Building) - Material used, Passive buildings, Intelligent
(Smart) buildings – Meaning;
Construction Practices: Specifications, details and sequence of activities and construction

co-ordination, Site Clearance, Marking, Earthwork, damp proof courses, construction joints -
movement and expansion joints, pre cast pavements, Building foundations, basements,
temporary shed, centering and shuttering- slip forms, scaffoldings, de-shuttering forms,
Fabrication and erection of - steel trusses, frames, weather and water proofing, roof finishes,
acoustic and fire protection;
Sub Structure Construction: Techniques of Box jacking, Pipe Jacking, under water
construction of - diaphragm walls and basement, Piling techniques, well and caisson, sinking
cofferdam , cable anchoring and grouting, sheet piles – shoring for deep cutting, well points,
Dewatering and stand by Plant equipment for underground open excavation
Super Structure Construction: Common building construction methods (conventional walls

and slabs; conventional framed structure with blockwork walls); Modular construction
methods for repetitive works; Precast concrete construction methods; Basics of Slip forming
for tall structures; Basic construction methods for steel structures;
Tunneling: Geotechnical investigations, selection of alignment, methods of tunneling in soft

soils and in hard rock, sequence of operations for drilling and blasting method, mechanical
moles, boomers, tunnel boring machines, mucking, ventilation of tunnels, dust control, types
of tunnel supports, sequence of lining operation, lining with pneumatic placers and by
pumpcrete method, shortcrete;
Bridge Construction: Geotechnical investigation, Site selection, Launching girders, bridge

decks, launching of bridges by incremental launching, using false work, balanced cantilever
construction method, Coffer dams types and applications;
Text books:
1. Building Construction, Planning Techniques and Method of Construction, Arora S.P.
and Bindra S.P., Dhanpat Rai and Sons, 1997
2. Harbour dock and tunneling, R. Srinivasan, Charotar publishing house private limited,
2016
3. Building Construction, B.C. Punmia,‎ Ashok Kumar Jain & Arun Kumar Jain, Laxmi
publications, 11th edition, 2016
4. Bridge Engineering, S. C. Rangwala, Charotar Publishing House Pvt. Limited, 16th
edition, 2015
Reference books:
1. Construction and Foundation Engineering, Jha J and Sinha S.K., Khanna Publishers,
7th Edition, 2008
2. Construction Equipment and Management, Sharma S.C., Khanna Publishers New
Delhi, 2012.
3. Construction Equipment and Job Planning, Deodhar, S.V. Khanna Publishers, New
Delhi, 2012.
4. Construction Planning, Equipment and Methods, Peurifoy, R.L., Ledbetter, W.B. and
Schexnayder, C., 8th edition, McGraw Hill, Singapore, 2010
CE304U(C): EARTHQUAKE ENGINEERING
Course Description
The students need to understand the behaviour of structures under earthquake loads. Also,
they should be able to understand the philosophy behind earthquake resistant design. This
course will give methodology to students for efficient design of structures.
Course Objectives
1. Understanding to the behaviour of structures during earthquake ground motion.

2. To introduce design philosophy for earthquake resistant structures.
3. Understanding earthquake tips for structures.
4. To introduce necessary field arrangements for efficient seismic design.
Course Outcomes
Upon successful completion of this course the students will be able to:
1. identify appropriate earthquake zone for a particular location.

2. identify critical mode of vibrations
3. calculate base shear and storey forces.
4. produce efficient seismic design of buildings.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2
2 1 2 2
3 2 3
4 2 1 1 3 2
Course Content
Earthquakes: Causes of Earthquakes, Nature and Occurrence, Seismic Waves, Effects of

Earthquakes, Earthquake Damage, Measurements of Earthquakes, Strong Ground Motion,
Seismic Zoning, Response of Structure, Seismic Design.
Dynamics of Structures Connections: Modelling of Structures, Lumped Mass Approach,

Generalized Displacement Procedure, Equations of Motion, Hamilton's Principle, Systems
with Single Degree of Freedom, Dynamic Response of Single-storey Structure, Seismic
Response of SDOF Structures, Response Spectrum, Systems with Multiple Degree of
Freedom, Modes of Vibration, Damping.
Seismic Analysis: Seismic Design Requirements , Design Earthquake Loads, Seismic
Methods of Analysis, Equivalent Lateral Force Method, Forces in Seismic Analysis,
Fundamental Natural Period, Seismic Base Shear, Seismic Weight, Torsion, Soft and Weak
Storeys
Masonry Buildings: Categories of Masonry Buildings, Behaviour of Unreinforced and

Reinforced Masonry Walls, Box Action and Bands, Behaviour of Infill Walls, Confined
Masonry Construction, Improving Seismic Behaviour of Masonry Buildings, Restoration and
Strengthening of Masonry Walls.
Reinforced Concrete Buildings: Damage to RC Buildings, Ductile Failure, Concrete

Detailing, Flexural Members in Frames, Columns subjected to Axial Load and Bending,
Introduction to IS Code on Ductile Detailing, Special confining Reinforcement, Joints of
Frames, Shear Walls.
Non-structural Elements: Failure Mechanisms, Effect of Non-structural Elements on

Structural System, Prevention of Non-structural Damage, Isolation of Non-structural
components.
Text books:
1. Earthquake-Resistant Design of Structures, S.K. Duggal, Oxford University Press, 2nd

edition, 2013
2. Earthquake-Resistant Design of Building Structures, Vinod Hosur, Wiley India, 2013
3. Basics of Structural Dynamics and Aseismic Design, S.R. Damodarasamy and S.
Kavitha, Prentice Hall of India, 2014
Reference books:
1. Basic Earthquake Engineering, Haluk Sucuoglu and Sinan Akkar, Springer, 2014
2. Earthquake-Resistant Design of Structures, Pankaj Agarwal and Manish Shrikhande,
Prentice Hall of India, 2013
3. IS 1893-2016 Criteria for Earthquake-Resistant Design of Structures
4. IS 13920-2016 Ductile Detailing of Reinforced Concrete Structures subjected to
Seismic Forces
CE304U D: ARCHITECTURAL PLANNING AND INTERIOR DESIGNING
Course Description
This course provides the knowledge of architectural design, building aesthetics, landscaping
and interior designing.
Course Objectives
1. To understand architectural design of residential and public/commercial buildings.
2. To know landscaping for residential buildings and public/ commercial buildings
3. To understand interior designing of small commercial buildings
Course Outcomes

1. apply the knowledge, techniques, skills, and applicable tools of the discipline for
architectural design of residential buildings and public/commercial buildings.
2. apply the knowledge for landscaping of residential buildings and public/ commercial
buildings.
3. apply the knowledge for interior designing of small commercial buildings.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 3 2 3
2 2 2
3 3 2 2
Course Content
Architectural design: Review of Architecture, Site selection, climatic conditions, sun

control, orientation of building & site, Building bye laws and its applications.
Building Aesthetics: Feeling for aesthetics and utility, composition, utility, mass
composition, order, expression, proportion, scale, accentuation, order, expression, proportion,
scale, accentuation & rhythm, contrast, balance, pattern, Character of building.
Design of Projects: A case study of residential building, A case study of public / commercial
building, Aspect of working Drawing – Plan, Elevation and Section.
Landscaping: Soft and hard landscaping, Basic principles of landscaping, Assessment of
land, Design procedure, A case study of landscaping for public / commercial building
campus.
Elements & principle of Interior Design: Elements such as form, texture, light, colour,
effect of light on colour and texture, organization of space in design, space pattern,
Importance of colour as art element, Various colour scheme
Anthropometrics Data: Relation of human measurement to furniture and movement to

circulation patterns.
Interior materials: Different interior materials, paneling, partitions, finishing materials,

furniture, False ceiling, Flooring, Paints.
Interior of Residential Building: Use of space, circulation, standard size of furniture, Plans
and elevation of interior with furniture for living space, dining space, kitchen, bed room,
guest room etc.
Interior of small commercial building: Planning of interior of small commercial units such
as offices, consulting chambers, shops etc. Furniture details such as executive table,
architectures table etc. used in commercial units
Text books:
1. Interior Design and Decoration, Premavathy Seetharaman and Parveen Pannu, CBS
Publishers & Distributors Pvt. Ltd., 2013
2. Interior Design Illustrated, Frank Ching, Wiley, 3rd edition, 2012
3. Time Saver Standard for Interior Design and Space Saving, J.D. Chiara, J. Panch, M.
Zelnik, McGraw Hill, 2001
Reference books:
1. SP7:2016 : National Building Code of India, Vol. 1 & Vol. 2, 2016
2. Architectural Graphic Standards, Dennis J. Hall, Nina M. Giglio, Wiley, 12th Edition,
2012
3. Human Dimension & Interior space: A Source Book of Design Reference Standards,
Julius Panero, Whitney Library of Design, 11th edition, 1979
4. India: Decoration, Interiors, Design, Henry Wilson, Watson-Guptill Publications,
2001
CE305U (X) : BUILDING CONSTRUCTION PRACTICE
Course Description
The construction of buildings is everyone’s need. The students admitted in other than Civil
Engineering discipline are not conversant with building as a structure. Even though everyone
understands building in general, but it is necessary to introduce these students engineering
aspect in the construction, maintenance and safety of the building as a structure. This course
will introduce students building as civil engineering structure which is important in every
human being.
Course Objectives
1. To give an understanding to the students about building
2. To know planning aspect of a building
3. To expose to various principles involved in building construction, finishing,
painting and plumbing.
4. To know routine methods of fire proofing, damp proofing and thermal insulation.
Course Outcomes
1. be able to plan building and develop the building plans.
2. understand various parts of building.
3. adopt standard building provisions for natural ventilation and lighting.
4. able to identify effective measures for fire proofing, damp proofing, and thermal
insulation.
5. able to understand routine building maintenance procedure

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 1 2 3
2 2 1 1 2
3 3 2
4 3 2
5 1 2 2
Course Content
Building planning, site selection, orientation from environmental and other factors, principles
of planning buildings, open air spaces, requirement of parts of buildings, lighting and
ventilation, requirements of various rooms, Building bye laws.
Components of building and their purpose and types; foundations, walls, columns, beams,
roofs, lintel, arches, doors, windows; Bands and openings in the buildings;
Foundation of buildings, Different type of foundations and their details, suitability of
different type, Piles, Type and their details
Brick masonry: Bonds in brick work, Types, junctions & pillars of different sizes,
Requirements of good brick masonry
Building finishes: Plaster, properties of good plaster, preparation of surface, methods of

plastering, Defects of plaster, Painting, preparation of surface & types, White washing,
Colour washing, distemper, washing with snow-cem Painting
Doors and windows, - Location, function, various types.
Staircases: Location, function, various terms used, requirement of good stair, type of stairs,
dimensioning of stair case, lift, escalators
Roofs: Necessity, pitched & flat roof, terms used in roofs, various types
Plumbing works in buildings;
Damp proofing; causes and effect of dampness, materials and methods of damp proofing;
Termite proofing: pre and post construction treatment;
Thermal insulation, methods of thermal insulation, thermal insulation of roofs and exposed
walls;
Fire protection- fire hazards, characteristics of fire-resisting materials and common building
materials;
Cracks in walls, floors and ceilings-causes and repairs techniques; Routine maintenance of
buildings and structures.
Text books:
1. Building Construction, Punmia B. C., Jain A. K. and Jain Arun K., Laxmi Publications
(P) Ltd., New Delhi, 11th edition, 2016
2. Building Construction, Sushilkumar, Standard Publishers Distributors, Delhi, 10th
edition, 2010
3. Building Construction Material and Techniques, Purushothama Raj P., Pearson India
Education Services Pvt., Ltd, Noida, 1st edition, 2017
Reference books:
1. Building Construction, Rangawala, Chaarotar Publishing House Pvt. Ltd., Delhi, 10th
edition, 2010
2. Building Construction, Varghese P. C., PHI Learning Pvt. Ltd., 10th edition, 2012
3. SP7:2016 : National Building Code of India, Vol. 1 & Vol. 2, 2016
CE305U (Y): REPAIR AND REHABILITATION OF BUILDINGS
Course Description
This course deals with the repair and rehabilitation of structures and covers, introduction to
the assessment of deterioration of concrete and masonry structures; repair and materials and
strategies; compatibility aspects; durability and repair audits; methods and materials for
rehabilitation of structures.
Course Objective
1. To understand the process of rehabilitation of buildings
2. To know the methods and materials for rehabilitation of structures
3. To understand methods of testing the material properties
4. To understand methods of repair and rehabilitation
Course Outcomes
1. understand the causes for distress and deterioration of structures.
2. select materials and techniques for repairing and rehabilitation of deteriorated
structures.
3. prepare a plan for repair and rehabilitation works.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2
2 2 1
3 1 1
Course Content
Introduction to Rehabilitation of Buildings: An overview of present repair practices for

buildings, distress identification and repair management, Causes of distress in concrete and
masonry buildings, Permeability of concrete, aggressive chemical agents, durability
aspects, Condition Survey- Definition, objectives, different stages-Preliminary inspection,
planning stage, visual inspection, field laboratory testing stage, consideration for repair
strategy.
Non Destructive and Destructive Testing Methods: Non-Destructive evaluation tests -

Concrete strength assessment - Rebound hammer test - Ultrasonic pulse velocity tests,
penetration resistance, pull out tests, core sampling and testing, Chemical tests,
Carbonation tests and chloride content, Corrosion potential assessment.
Evaluation of Properties of Building: structural integrity and soundness assessment,
interpretation and evaluation of results, Evaluation of reserve strength of existing structures,
identifying critical sections, active and passive repairs;
Materials for Repair Selection of repair materials for masonry and concrete buildings-
Essential parameters for repair materials-Strength and durability aspects, cost and
suitability aspects, Materials for repair-Premixed cement concrete and mortars, polymer
modified mortars and concrete, epoxy and epoxy systems including epoxy mortars and
concrete, polyester resins, coatings,
Repairs and Rehabilitation methods : Rehabilitation and retrofitting methods-repair

options, performance requirements of repair systems, important factors to be
considered for selection of repair methods, Repair stages, Guniting, shotcreting,
polymer concrete system, reinforcement replacement, strengthening concrete by surface
impregnation, polymer and epoxy overlays, Resin/polymer modified slurry injection, plate
bonding technique, ferro-cement jacketing, RCC jacketing, propping and supporting, fiber
wrap technique, foundation rehabilitation methods, chemical and electrochemical method of
repair, Repair/Rehabilitation strategies- Stress reduction technique, repair and strengthening
of columns and beams, base isolation.
Planning for repair and rehabilitation works: Preparing work plan for repair and
rehabilitation works, execution of work, post repair inspection
Text books:
1. Maintenance Repair and Rehabilitation & Minor works of Building, Varghese P.C.,
Prentice Hall India, 2014
2. Repair and Rehabilitation of Concrete Structures, Modi P.I., and Patel C. N., Prentice
Hall India, 2016
3. Rehabilitation of Concrete Structures, Vidivelli B., Standard Publishes Distribution,
1st edition, 2009
Reference books:
1. Structural Health Monitoring, Ravishankar K. , Krishnamoorthy T.S, Allied
Publishers, 2004
2. CPWD Handbook on Repair and Rehabilitation of RCC buildings, Govt. of India
Press, New Delhi
CE306U CONSTRUCTION MANAGEMENT
Course Description
This course introduces the students about concepts in Project Management such as: Scope of
Project Management civil Engineering society, Importance of Project Management for large
scale works, Principles of Project Management and its techniques and Application of CPM
and PERT techniques for project management with special applications to civil engineering.
Course Objectives
1. To understand the project management techniques in various civil engineering fields.
2. To know the concept of critical path methods and project evaluation and research
techniques.
3. To understand scheduling of projects by CPM and PERT.
Course Outcomes
1. apply advanced techniques and methods in project management of civil engineering
work
2. plan, control and monitor construction projects with respect to time and cost
3. apply the financial concepts relating to construction industry for achieving economy
and reducing project duration
4. use different equipment’s in construction industry

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 1 1 3 1
2 1 1 1 3 1
3 1 1 1 2
4 1 2 1
Course Content
Construction organization: Construction industry, construction team, construction
activities, classification of construction, stages in construction, need of management in
construction. Job layout and value engineering. Leadership and its quality, organization,
meaning and function, forms of organization‐line, line and staff, functional, Type A, Type B
and Type C.
Construction project planning: Stages of project planning: pre-tender planning, pre-

construction planning, detailed construction planning, role of client and contractor, level
of detail, Process of development of plans and schedules, work break-down structure, activity
lists, assessment of work content, concept of productivities, estimating durations,
sequence of activities, activity utility data; Techniques of planning- Bar charts, Gantt
Charts. Networks: basic terminology, types of precedence relationships, preparation of
CPM networks: activity on link and activity on node representation, computation of
float values, critical and semi critical paths, calendaring networks. PERT- Assumptions
underlying PERT analysis, determining three time estimates, analysis, slack
computations, calculation of probability of completion;
Construction equipment: Selection of equipment for earth work – earth moving operations ,
types of earthwork equipment -tractors, motor graders, scrapers, front end waders, earth
movers, Equipment for foundation and pile driving, Equipment for material handling and
erection of structures, types of cranes, Equipment for dredging, trenching, tunneling,
Equipment for Dewatering; transportation of materials, Concrete mixing, transporting &
placing;
Planning and organizing construction site and resources at Site: site layout
including enabling structures, developing site organization, Documentation at site;
Manpower: planning, organizing, staffing, motivation;
Cost Analysis: Cost analysis, cost curve, optimization and crashing of networks. Updating of
network during monitoring, resource levelling, allocation, levelling and smoothening, Line of
balance‐Concept and uses, Materials management: Functions and objective, materials
procurement and delivery Inventory control, BOQ techniques;
Contracts Management basics: Importance of contracts; Types of Contracts, parties to a

contract; Common contract clauses, Notice to proceed, rights and duties of various parties,
notices to be given, Contract Duration and Price. Performance parameters, Delays, penalties
and liquidated damages, Force Majeure, Suspension and Termination.Changes & variations,
Dispute Resolution methods.
Text books:
1. Construction Planning, Equipment’s and Methods, R. L. Peurifoy, 7th edition, Tata
McGraw‐Hill, 2002
2. Construction Project management, Theory & Practice, Kumar Neeraj Jha, Pearson
Education India, 2nd edition, 2015
3. Project Planning with PERT and CPM, Punmia, B.C., Khandelwal, K.K., Laxmi
Publications, 4th edition, 2016
Reference books:
1. Construction Equipment and Job Planning, S. V. Deodhar, Khanna publishers, 4th
edition, 2012
2. PERT and CPM Principles and Applications, L. S. Srinath, Affiliated East West Press
Pvt. Ltd., 3rd edition, 2012
3. Principles of Construction Management, Roy Pilcher, McGraw-Hill, 3rd edition,
1992
4. Project Management: Techniques in Planning and Controlling Construction Projects,
Hira N. Ahuja, S. P. Dozzy, S. M. Abourizk, John Wiely, New York, 1994
CE307U: DESIGN OF RCC STRUCTURES LAB
Teaching Scheme:2P Total: 2 Hr Credit: 1
Evaluation Scheme: 25 ICA + 25 ESE Total Marks: 50
Course Description
The primary aim of this course is to analysis and design of reinforced concrete structures, by
limit state method conforming to IS 456:2000. The course covers design of various elements
viz. beams, slabs, columns, and footing in RCC. It equips the students with the software
tools necessary for designing RCC structures.
Course Objectives
1. To prepare detailing of reinforcement of members under various loading conditions

2. To prepare schedule of the reinforcement
3. To practice the elementary design of different structural elements
Course Outcomes
1. implement the concepts of structural design procedure
2. design the individual members and hence building as a whole
3. implement the concept of detailing of reinforcement
PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 1 2 2 1 1 3
2 1 1 2 2 1 2 2
3 2 2 1 3 1 2 2 2
Following assignments shall be performed to cover entire curriculum of course CE302

U. List given below is just a guideline.
1. Design of beams and slabs and prepare detailed drawing of beams and slab with
reinforcement detailing.
2. Design of columns and footings and prepare detailed drawing of columns and footings
3. Design of staircase.
4. Project: Design of G+1 Building with detailed drawing of designs should be
completed with AutoCAD software
5. A report on at least one site visit shall be submitted in ICA
Note:
 ICA – Internal Continuous Assessment shall support for regular performance of practical
and its regular assessment. In addition; it shall be based on knowledge/skill acquired and
record submitted by student (journal) based on practical performed by him/her. The
performance shall be assessed experiment wise using internal continuous assessment
format..
 ESE – The End Semester Exam for this course shall be based on oral examination to
judge the skills acquired by student. It shall be evaluated by two examiners out of which
one examiner shall be outside the institute.
CE308U DAMS AND HYDRAULIC STRUCTURES LAB
Teaching Scheme: 02P Total: 02Hr Credit: 01
Evaluation Scheme:25 ICA + 25 ESE Total Marks: 50
Course Description
This course provides the knowledge of stability analysis of gravity dam and earth dams.
Design of ogee spillway and analysis of weir using Khosala’s theory will also learned.
Course Objectives
1. To do the stability analysis of gravity and earth dam
2. To design of ogee spillway
3. To do analysis of weir on permeable foundation.
Course Outcomes:
1. understand different levels in reservoir
2. able to design practical profile of gravity dam & ogee spillway
3. able to analyze the weir on permeable foundation
4. able to do the stability analysis of earth dam, gravity dam and weir

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2
2 3 3
3 3 3
4 2 3
Minimum eight experiments shall be performed to cover entire curriculum of course

CE301U. List given below is just a guideline.
1. Fixing the control levels of reservoir from the given data

2. Determination of elementary and practical profile of gravity dam, Stability analysis of
a gravity dam considering all major forces and plotting the section on drawing sheet
3. Construction of phreatic line for earth dam under various conditions
4. Stability analysis of downstream slope of earth dam for steady seepage condition
5. Design of ogee shape spillway with stilling basin and plotting its section on drawing
sheet
6. Design and plotting of various types of energy dissipaters
7. Analysis of weir on permeable foundation by using Khosla’s charts.
8. Design and plotting typical cross section of canals in cutting, partial cutting and
banking, fully banking
9. Drawings of diversion headwork, weirs and barrages,
10. Site visit to any dam and submission of detailed report based on visit including photos
and drawings.
Note:
 ICA – Internal Continuous Assessment shall support for regular performance of

practical and its regular assessment. In addition; it shall be based on knowledge/skill
acquired and
format (S 10)
judge the skills acquired by student. It shall be evaluated by two examiners out of
which
one examiner shall be out of institute.
CE309U TRANSPORTATION ENGINEERING -LAB
Teaching Scheme: 2P Total: 2 Hr Credit: 1
Course Description
The student will be able to determine the engineering characteristics of highway material viz.
soil, aggregate and bitumen. It will helpful to understand design and analysis of flexible and
rigid pavement. The site visit will enhance the actual field experience about construction of
highway.
Course Objectives
1. To study the identification of good highway material.
2. To study the different physical properties of aggregates by performing different test
on road aggregates
3. To understand the various properties of bitumen material and mixes by performing
various tests on it.
4. To able to design highway pavement.
Course Outcomes
1. able to characterize the pavement materials soil, aggregate and bitumen
2. able to design bitumen mix
3. perform quality control tests on pavements and pavement materials.
4. able to design flexible and rigid pavement

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2
2 2 3
3 3 2
4 3 3

CE303U. Minimum three from group A, two from group B, one from group C and two
from group D to be performed.
A. Test on Bitumen
1. Penetration test
2. Ductility of Bitumen
3. Softening point of Bitumen
4. Flash & fire point
5. Specific gravity of Bitumen
6. Viscosity of Bitumen
7. Bitumen extraction test (on premix sample)
B. Tests on Aggregates
8. Stripping value of road aggregates.
9. Crushing test
10. Abrasion test
11. Impact test
12. Shape Test
C. Test on Soil
13. CBR test
14. Plate load test (for modulus of subgrade reaction)
15. Dynamic cone penetration test
D. Design
16. Bituminous mix design Marshal Stability test
17. Numerical / software based on Flexible Pavement Design
18. Numerical / software based on Rigid Pavement Design
19. A report on at least one site visit for major road projects or hot mix plant
Note:

acquired and
format (S 10)
which
CE310U(A) HYDRAULIC ENGINEERING LAB
Teaching Scheme: 02P, Total: 02Hr Credit: 01
Course Description
This laboratory covers experiments related to measurement of drag and lift, characteristics
curve for wind tunnel, determination of manning’s constant, coefficient of discharge and
study of hydraulics jumps.
Course Objectives
1. To measure the pressure distribution by using wind tunnel
2. To determine Manning’s Chezy’s constant
3. To study of hydraulic Jumps
4. To study velocity distribution in open channel
Course Outcomes
1. able to determine the Manning’s and Chezy’s coefficients for smooth and rough
channels
2. able to calculate the discharge through venturiflume
3. able to determine the discharge over wier
4. able to understand velocity distribution in open channel

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2
2 2 2
3 2 1
4 2 2

CE304U(A). List given below is just a guideline.
1. Determination of Manning’s and Chezy’s coefficients for smooth and rough channels
by gradually varied flow method.
2. Determination of Energy loss in Hydraulic jump.
3. Determination Velocity distributions in open channels
4. Measurement of lift and drag to determine characteristics of aerofile
5. Calibration of static pitot tube
6. Study of Uniform Flow – Determination of Manning’s constant
7. Calibration of Venturiflume- Determination of coefficient of discharge
8. Calibration of Broad crested weir- Determination of coefficient of discharge
9. Flow through orifice meter
10. Measurement of Velocity of flow by current meter / Floats / Hot-wire anemometer
11. Flow through pipes in series and pipes in parallel
12. A site visit to canal or pipe network to understand the application
Note:
acquired and
format (S 10)
which one examiner shall be out of institute.
CE310U (B): CONSTRUCTION PRACTICES LAB
Course Description
This is a basic course which makes a student familiar with the detailed features of various
building, components and appraises about construction practices. The course includes
description of construction practices used for sub structure, super structure of buildings and
tunnels.
Course Objectives
1. The main objective of this course is to make the student aware of the various
construction techniques, practices needed for different types of construction
activities.
2. At the end of this course the student shall have a reasonable knowledge about the
various construction procedures for sub to super structure.
Course Outcomes
1. Set foundation plan of load bearing and framed structures on drawing sheets and
on ground.
2. Through field visit students will aquire knowledge of various construction
practices adopted at site.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2 2 2 1 3 1
2 2 1 1 1 1 1 3
Minimum Six experiments shall be performed to cover entire curriculum of course

CE310U(B). The list given below is just a guideline.
1. Preparation of foundation plan of load bearing structure from the given plan and
section consisting of minimum four rooms and toilet block on drawing sheet / Auto
CAD and its Setting out on ground.
2. Preparation of foundation plan of framed structure from the given plan and section
consisting of minimum four rooms and toilet block on drawing sheet / Auto CAD and
its Setting out on ground.
3. Study of various formworks with case study
4. Study of erection of steel trusses with case study
5. Study by market survey for various weathering and water proofing materials
6. Study of construction of pile foundation
7. Study of equipment’s for dewatering and open excavation
8. Field visits to construction sites of building for studying various construction
activities and preparing the report.
9. Field visits to construction sites of culvert/bridge for studying various components
and construction details and preparing the report.
10. Preparation of case study of construction of tunnel including various aspects of
construction techniques/ procedure.
Note:
ICA – Internal Continuous Assessment shall support for regular performance of
acquired and record submitted by student (journal) based on practical performed by
him/her. The performance shall be assessed experiment wise using internal continuous
assessment format (S 10).
ESE – The End Semester Exam for this course shall be based on oral examination to
CE310U(C): EARTHQUAKE ENGINEERING LAB
Course Description
The students admitting in Civil Engineering discipline have to understand behaviour of
structures under Earthquake strong ground motions. Also, they should be able to enhance
seismic performance of structures. This course will give exposure to students to understand
earthquake engineering for building structures.
Course Objectives
1. Understanding earthquake loadings coming on the structures.
2. To apply ductile design philosophy for Reinforced Concrete building structures.
3. To make use of relevant IS codes for Earthquake Resistant Design of Structures.
Course Outcomes
1. identify Earthquake Zones for a particular location.
2. calculate Earthquake loads for various structures.
3. understand suitable ductile detailing.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2
2 2 1 3
3 1 2 2

CE304U(C). List given below is just a guideline.
1. Identifying Earthquake Zone for a particular location.
2. Collection of the data for past Earthquakes.
3. Collection of Time-History for important Indian Earthquakes in the past.
4. Calculation of dynamic properties for Single Degree of Freedom system.
5. Determining natural frequency for SDOF system.
6. Determining natural frequency and modes shapes for two DOF system.
7. Calculation of design seismic loads for building frames (Static analysis).
8. Calculation of design seismic forces for building frames (Response Spectrum).
9. Applying Earthquake tips for a typical masonry building.
10. Drawing ductile detailing for a typical RC Beam.
11. Drawing ductile detailing for a typical RC Beam-Column joint
12. Drawing special confining reinforcement for a typical RC Column and Footing.
Note:
acquired and
format (S 10)
CE310U(D): ARCHITECTURAL PLANNING AND INTERIOR DESIGNING LAB
Course Description
This course provides the knowledge of architectural design, building aesthetics, landscaping
and interior designing.
Course Objectives
1. Architectural design of residential and public/commercial buildings.
2. Landscaping for residential buildings and public/ commercial buildings
3. Interior designing of small commercial buildings
Course Outcomes
1. apply the knowledge, techniques, skills, and applicable tools of the discipline for
architectural design of residential buildings and public/commercial buildings.
2. apply the knowledge for landscaping of residential buildings and public/ commercial
buildings.
3. apply the knowledge for interior designing of small commercial buildings.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 3 2 3
2 2 3
3 3 2 3
Course Content
Minimum Six experiments shall be performed to cover entire curriculum of course CE310 U
(D). The list given below is just a guideline.
1. Planning of multistoried residential building considering site conditions, climatic

conditions, building rules and bye laws, principles of planning, building aesthetics
and drawing its Plan, Elevation and Section on sheet / AutoCAD / Revit
2. Planning of multistoried commercial building considering site conditions, climatic
conditions, building rules and bye laws, principles of planning, building aesthetics,
mass composition and drawing its Plan, Elevation and Section on sheet / AutoCAD
/ Revit
3. Design of landscaping for public / commercial building campus and its drawing
4. Interior of Residential Building: Plans/ elevation /isometric of interior with
furniture for living space, dining space, kitchen, bed room, guest room etc
5. Interior of small commercial building: Planning of interior of small commercial unit
such as office/ shops with furniture details such as executive table, architectures
table etc. used in commercial units and its drawings
6. Market survey for interior material available in the market
7. Site visit to a interior of residential building / commercial building
Note:
acquired and
format (S 10)
which one examiner shall be out of institute
SH496U ORGANIZATIONAL BEHAVIOUR
Teaching Scheme: 03 L Total : 3 Hr Credit: 03

Evaluation Scheme: 30 MSE +10 ISA + 60 ESE Total marks: 100
Course Description:
The course is intended to provide basic understanding of organizational behavior to
engineering students with the basic concept of attitude & job satisfaction. This course
introduces the student to the fundamental concepts of organizational behavior (OB);
personality, perception and decision making, motivation and leadership etc. Students will
study the interpersonal behavior. Students will learn organizational change and conflict
management.
Course Objectives:
1. To understand fundamentals of behavior in an organization.
2. To increase understanding of the concept of attitude & job satisfaction in an
organization.
3. To acquaint the students with the appropriate concepts, theories to make better
understanding of behavioral dynamics.
4. To understand the latest developments and cultivate an understanding of
organizational culture and structure.
5. To understand applications of organizational change, power and conflict.
Course Outcomes:
1. know the basic concept of organizational behavior
2. able to demonstrate the ability to personality, perception and decision making
3. understand and implement the fundamental concepts motivation and leadership
4. understand the interpersonal behavior
5. deal with organizational change and conflict management

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2
2 3 1 1 2
3 2 1 2
4 2 2 2 2
5 3 1 2
1-Weakly correlated 2 – Moderately correlated 3 – Strongly

correlated
Course Content
Organisation Behaviour: Field of organization behaviour: past and present, importance,

emerging issues, organization behaviour: a framework and interdisciplinary influences on
organization behaviour, challenges and opportunities for organization behavior.
Attitude & Job Satisfaction: main components of attitudes, types of attitude, attitude and
consistency, cognitive dissonance theory, relationship between attitudes and behavior, major
job attitudes, job satisfaction, measuring job satisfaction, factors determining job satisfaction,
the impact of satisfied and dissatisfied employees on the workplace.
Personality, Perception and Decision Making: Personality: Definitions, Myers-Briggs

Type Indicator (MBTI), The Big Five Personality Model, Personality Traits, Perception:
factors affecting perception, Attribution theory, Improving perception, Perception and its
application in organization, Decision Making: Meaning, Types of decisions, Decision
Making Process, Individual Vs Group Decision Making, Decision Making Conditions,
Creativity.
Motivation and Leadership: motivation: definitions, meaning, types, Maslow’s theory of

hierarchy of needs, Alderfer’s ERG theory, McCellands Learned Needs Theory, Theory X
and Theory Y, Motivation-Hygiene Two Factor theory, Goal Setting Theory. Leadership:
definitions, types, traits of leadership, transactions vs transformational leadership, VUCA
leaders, leadership grid & leadership formulation.
Interpersonal Behaviour: Introduction - Johari window, Ego state Analysis of transactions,

Life script-Life positions-Stroking, Psychological games, Benefits of transactional analysis.
Organization Culture and Structure: Concept of organizational culture, functions of

organizational culture, organization structure: definition, form of organisational structure –
formal and informal organisation, span of management, types of organizational structure
Organizational change and Conflict: Introduction-understanding change- organisational

growth as a kind of change, forces of change, forces for change, factors in organizational
change, planned change, human response to change, resistance to change, managing
resistance to change Conflict: Definition, transition of conflict, types of conflict, conflict
process, causes of conflict, conflict resolution model.
Power & Politics: Definition & meaning, difference between power & authority, bases of
power, power tactics, politics: power in action, factors contributing to political behavior:
individual & organizational, impression management politics - techniques of political plays-
Machiavellianism-strategies used by executives
Text Books:
1. Organizational Behavior, Stephen P. Robbins, Timothy A. Judge, Neharika Vohra,
18th edition, Pearson publications, 2018
2. Organizational Behaviour, Shuchi Sharma, 1st edition, Tata McGraw Hill, 2012
3. Organizational Behaviour, Ray French, Charlotte Rayner, Gary Rees and Sally
Rumbles, 3rd edition, Wiley Publications, 2015
4. Organisational Behaviour, K. Aswathappa, 12th edition, Himalaya Publishing
House, 2016
Reference Books:
1. Business Psychology and Organisational Behaviour: A Student's Handbook,
McKenna, E. F., Psychology Press, 2000
2. A Organisational behaviour on the Pacific Rim, Tony Travaglione, Steven
McShane, and Mara Olekalns, 3rd edition, McGraw-Hill Higher Education, 2010
3. Leadership: A New Synthesis, Hunt, J. G., 4th edition, Sage Publications, Inc, 1996
CE351U: ADVANCED THEORY OF STRUCTURES
Course Description
Structural analysis is an important aspect of civil engineering. The determinate structures are
covered by the previous courses. However this course covers the statically indeterminate
structures, which emphasis on the analysis of statically indeterminate beams and rigid frames.
Methods included are moment area method to calculate slope and deflection, and matrix
analysis.
Course Objectives
1. To understand analysis of curved members
2. To understand approximate methods of analysis
3. To study Unsymmetrical Bending and Shear Center, analysis of space trusses
4. To understand basics of theory of elasticity
Course Outcomes
1. formulate equilibrium and compatibility equations for structural members
2. analyze one dimensional indeterminate problems using classical methods
3. analyze indeterminate structures using energy methods
4. analyze structures for gravity loads and moving loads

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 2 2 1 1 1 3
2 2 1 2 1 1 2 2 1
3 2 2 1 3 1 2 1 2 2
4 2 3 2 1 2 1 1 3
Course Content
Basic Concepts of Structural Analysis: Types of skeletal structures, static and kinematics
indeterminacy, equilibrium and compatibility conditions, stress‐strain relations, force
displacement relations, concept of linear/non‐ linear structures. Energy theorem, Muller
Breslau principle, concept of complementary energy, fundamental concept of force and the
displacement method of analysis.
Slope Deflection Method: Applied to continuous and rigid jointed frames, transverse and
rotational yielding of supports.(up to three unknown),Sway and non-sway problems.
Moment Distribution Method: Applied to continuous beams and rigid jointed rectangular
frames, transnational and rotational yielding of supports.
Kani’s, moment distribution for framed structures
Approximate Analysis of Multistory Frames: Vertical and lateral loads, substitute frame,
portal frame and cantilever method.
Fundamental Concept of Flexibility: Method for structural analysis, flexibility coefficient,
matrix formulation for flexibility methods, degree of freedom. Influence coefficients,
physical significance, choice of basic determinate structure and redundant forces,
compatibility equations, effect of settlement and rotation of supports, temperature and lack of
fit, hand solution of simple problems on beams, pin jointed plane truss and rigid jointed
frames (Up to three unknowns)
Fundamental Concept of Stiffness: Method of structural analysis, stiffness coefficient,
matrix formulation for stiffness methods, degree of freedom. Influence coefficients, physical
significance effect of settlement and rotation of trusses and rigid jointed plane frames (Upto
three unknown)
Text Books:
1. Basic Structural Analysis, Reddy C. S., 3rd edition, Tata – McGraw Hill, New Delhi,
2012.
2. Theory of structures, S. Ramamrutham, Dhanpat Rai Books Publishers New Delhi, 9th
edition, 2014
Reference Books:
1. Structural Analysis, Bhavikatti S. S., New Age Publication, 4th edition, 2013
2. Theory of Structures, Stephen P. Timoshenko and D. H. Young, 2nd edition, McGraw-
Hill, 1965
3. Structural Analysis, G. S. Pandit and S. P. Gupta, Tata McGraw Hill, Pub. Co. Ltd.,
New Delhi, 2nd edition, 2008
CE352U: GEOTECHNICAL ENGINEERING
Course Description
The course applies and extends the fundamental understanding of soil mechanics to the
design of geotechnical engineering systems. This course will introduce student importance of
soil with respect to civil engineering structures. The student will acquire the knowledge of
index and different engineering properties, its method of determination and usefulness.
Course Objectives
1. To introduce the formation of soil
2. To understand soil as an engineering material.
3. To expose students to various index and engineering properties of soil.
4. To make aware about the behavior of soil with structural load.
5. To understand the process of ground improvement.
Course Outcomes
1. be able to identify index, engineering properties of soil and its classification.
2. understand the effective stress principle under various field conditions
3. be able to evaluate the permeability and compaction characteristics & its
application.
4. determine the stress distribution under applied loads.
5. understand shear strength parameters, consolidation settlement and ground
improvement.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2 2 1 3
2 3 3
3 3 2 3
4 3 1 2 2
5 3 3 2
Course Content
Introduction: Soil formation- Development of soil mechanics- Importance of soil
engineering- Major soil deposits of India.
Basic Definitions and Relationships: 3-phase soil system, volumetric relationships and weight
volume relationships.
Determination of Index Properties: Water content, Specific gravity, Grain size distribution
by sieve and hydrometer analysis, Relative density, Atterberg’s limits and indices.
Classification of Soils: Classification of soil systems – Particle size classification, Textural

classification, AASHTO classification, Unified soil classification and Indian soil
classification- Field identification of soils.
Soil Water: Types of soil water, Capillarity in soils, Permeability of soils, Darcy’s law,
Determination of permeability of soils by laboratory and field methods, Permeability of
stratified soils, Seepage velocity, Absolute coefficient of permeability, Factors affecting
permeability- Effective stress principle- Effective stress under different field conditions-
Seepage pressure-Quick sand condition.
Compaction of Soils: Definition and importance of compaction – Standard Proctor

compaction test, Modified compaction test- Factors affecting compaction- Influence of
compaction on soil properties – Field compaction and its control.
Stress distribution in Soils: Importance of estimation of stresses in soils – Boussinesq’s and

Westergaard’s theories for point loads, uniformly loaded circular and rectangular areas,
pressure bulb, variation of vertical stress under point load along the vertical and horizontal
planes – Newmark’s influence chart.
Consolidation: Types of compressibility – Immediate settlement – Primary consolidation and

secondary consolidation – Stress history of clay, normally consolidated soil, over
consolidated soil and under consolidated soil- preconsolidation pressure and its
determination- Estimation of settlements -Terzaghi’s 1-D consolidation theory – Coefficient
of consolidation and its determination.
Shear Strength: Definition and use of shear strength - Source of shear strength- Normal and
Shear stresses on a plane – Mohr’s stress circle- Mohr-Coulomb failure theory- Measurement
of shear strength, Drainage conditions -Direct shear test, Tri-axial shear test, Unconfined
compression test and vane shear test – Factors affecting shear strength of granular soils and
cohesive soils.
Ground Improvement : Need and objectives, Classification of Ground Modification

Techniques – suitability and feasibility, methods of compaction, shallow and Deep
compaction techniques, Vibro-floatation, Blasting, Dynamic consolidation, vacuum
consolidation, pre-compression and compaction piles
Text books:
1. Geotechnical Engineering, Dr. C. Venkatramaiah, New Age International Publishers,
6th edition, 2018
2. Soil Mechanics and Foundation Engineering, K. R. Arora, Standard Publishers and
Distributors, New Delhi, 7th edition, 2018.
3. Textbook of Soil Mechanics and Foundation Engineering, V. N. S. Murthy, CBS
Publishers & Distributors, 1st edition, 2018
Reference books:
1. Soil Mechanics and Foundations, B. C. Punmia, Ashok Kumar Jain, Laxmi Publication
(P) Ltd., 16th edition, 2005
2. Geotechnical Engineering, Gulhati and Datta , Tata McGraw Hill, 4th edition, 2006.
3. Geotechnical Engineering: A Practical Problem Solving Approach, Nagaratnam
Sivakugan and Braja M. Das, J. Ross Publishing, 2010
4. Soil Mechanics and Foundations, Muniram Budhu, John Wiley and Sons, 3rd edition,
2010
5. Basic and Applied Soil Mechanics, Gopal Ranjan and A. V. S. Rao, New Age
International Publishers, 2nd edition, 2005
CE353U: DESIGN OF STEEL STRUCTURES
Course Description
The students admitting in Civil Engineering discipline have to understand the behaviour of
various steel structural components. Also, they should be able to understand the philosophy
behind design of steel structures. This course will give methodology to students to design of
steel structural components.
Course Objectives
1. To give an understanding to the behaviour of steel structural components.
2. To introduce design philosophy for steel structures.
3. Understanding drawings of steel structures.
4. To introduce necessary field arrangements for steel structures.
Course Outcomes
1. calculate design loads for various steel structural components.
2. design simple steel structures.
3. design simple steel connections.
4. understand details of steel structural drawings.
PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2 2
2 1 3 2 .. 3 2
3 1 3 2 3 2
4 1 3 2 3 2
Course Content
Introduction: Principles of structural design, Structural systems, Role of the designer,

Advantages of steel as a structural material, Types of structural steel, Mechanical properties
of steel, various rolled steel sections (including cold-formed sections, structural pipe (tubes))
sections and their properties. Design philosophies: Introduction to working stress method,
Limit state method. Introduction to Plastic theory: Plastic hinge concept, Plastic moment,
Shape factor, Plastic section modulus. Types of loads acting on structure, Introduction to IS
Codes and specifications: IS 875, IS 800
Connections:
Bolted connections: Types of bolts, Behaviour of bolted joints. Strength of joint, efficiency
of joint, Analysis and Design of connections, Beam to beam, beam to column.
Welded connections: Types and properties of welds, Types of joints, Design of connections,
Beam to beam, beam to column.
Analysis and design of moment resisting bolted and welded connection
Tension Members: Identification of tension members in various types of Structures;

Behaviour of tension members; Mode of failures; Design of single and double angle sections.
Compression Members: Identification of compression members in various types of

Structures; Behaviour of compression members ; Mode of failures; Classification of cross
section; Effective length , slenderness ratio, Design strength ,Compression members in roof
trusses.
Beams and Columns: Behaviour of beams; simply supported beams; Laterally restrained
and unrestrained, Design of Beams; Welded Plate Girder; Curtailment of flange plates.
Columns and Bases: Behaviour of Column members in various types of Structures; Load
calculations for columns; Design of columns subjected to axial load and biaxial bending;
Built-up column sections; Laced and Battened columns; Slab bases
Text books:
1. Design of Steel Structures- Limit State Approach, N. Subramanian, Oxford University
Press, 2015
2. Limit State Design of Steel Structures, V.L. Shah and V. A. Gore, 1st edition,
Structures Publications, 2009
3. Design of Steel Structures by Limit State Method, S. S. Bhavikatti, I.K International
Publishing House Pvt. Ltd., 2012
Reference books:
1. Design of Steel structures, Edwin Gaylord and Charles Gaylord, Tata McGraw Hill,
2010
2. Steel Structures: Controlling behaviour through Design, Robert Englekirk, John Wiley
and Sons, 2003
3. Limit State Design in Structural Steel, M. R. Shiyekar, PHI Learning Pvt. Ltd., 2nd
edition, 2013
4. IS 800 (2007) General Construction in Steel — Code of Practice
CE354U (A): ADVANCED SURVEYING
Course Description
This course provides the knowledge of surveying using advanced surveying equipment’s
such as digital level, EDM, Digital Theodolite and Total Station and advanced technology
such as GIS, GPS and mobile apps.
Course Objectives
1. Carry out Leveling and Surveying using advanced surveying equipment’s such as
digital level, EDM, Digital Theodolite and Total Station
2. To understand basic concepts and terminology related with GIS and Remote Sensing
for carrying out survey and preparation of 3D views of terrains
3. To have knowledge of GIS and GPS software and mobile apps for surveying
applications
Course Outcomes

1. apply the knowledge, techniques, skills, and applicable tools of the discipline to
engineering and surveying activities
2. apply knowledge of GIS and Remote Sensing for carrying out survey and preparation
of 3D views of terrains
3. apply the knowledge of photogrammetry for surveying and preparation of maps.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 1 2 1 1 3
2 2 2 2 1 2 3
3 2 2 1 2 2
Course Content
Use of Advance Surveying and leveling equipment’s:

Study and use of Digital level, transferring and storing leveling data in computers, preparing
leveling pages through software
Study and use of Electronic Distance Meter, Principle of Electronic Distance Measurement,
Prisms used, Field procedure of measuring distance between points with EDM, EDM without
reflecting prism, error sources
Study and use of Digital Theodolite, Measuring distances, elevation, horizontal and vertical
angles of an object and. between points
Study and use of Total Station – Parts of a Total Station, Accessories, Advantages and
Applications, Field equipment, Setup, Measurements with total stations, Traversing,
Recording angle and distance observations in the field, Calculating rectangular coordinate
information from the field observation, Data retrieval, Data processing, Data plotting,
Construction layout using Total station , Checking for sources of errors with Total Station,
Maintenance
Land Surveys: Layouts, Measurements
Construction and Boundary Surveys: Equipment for construction surveys, Setting out pipe
line, setting out buildings and structures, setting out a highway
Geographical Information system: Introduction, Objectives, GIS Architecture

(subsystems), Components of GIS, GIS data types, Data models, Data acquisition in GIS,
Data processing, Implementation of GIS, Airborne Laser Thematic Mapper (ALTM) LIDAR,
Principles and methods of data collection, Digital Elevation Models, GIS Softwares
Global Positioning Systems: Earth surface datum, Coordinate systems, segments of GPS
Systems, GPS receiver and its components, different methods of observations, Surveying
with GPS, Co-ordinate transformation, accuracy considerations
Drone Surveying: Land mapping drones and their benefits, drone surveying applications,
benefits of drone surveying, land surveying by drones, processing drone data, processing
drone survey data, aerial surveying and mapping with drone images, drone softwares, drone
regulations
Surveying using mobile apps: Mobile apps for surveying and their applications, Property
Surveying
Text books:
1. Advanced Surveying: Total Station, GIS and Remote Sensing, Satheesh Gopi, R.
Satishkumar and N. Madhu, Pearson India, 1st edition, 2008
2. Surveying and Leveling, Vol. I and II, Bhavikatti, S.S., I.K. International Publishing
House Pvt. Ltd., 1st edition, 2010
3. Higher Surveying, Chandra, A.M., New Age International (P) Limited, 2nd edition,
2005
4. Surveying, Vol-I, II and III, Arora, K.R., Standard Book House, 2015
Reference books:
1. Geomatics Engineering, Manoj, K. Arora and Badjatia, Nem Chand & Bros., 2011
2. Remote sensing and Geographical information system, Anji Reddy, M., B.S.
Publications, 2001.
CE354U(B): REHABILITATION OF STRUCTURES
Course Description
This course deals with the repair and rehabilitation of buildings, bridges pavements. It covers
the following topics: introduction to the assessment of deterioration of concrete structures;
repair and materials and strategies; compatibility aspects; durability and repair audits;
methods and materials for rehabilitation of buildings.
Course Objectives
1. To understand rehabilitation of RCC structures
2. To know causes of deterioration, assessment of distressed building and other
structures
3. To understand the rehabilitation methods and materials for.
Course Outcomes
1. estimate causes for distress and deterioration of buildings.
2. apply Non Destructive Testing techniques to field problems
3. suggest materials and techniques for repairing and rehabilitation of deteriorated
concrete structures.
4. prepare concrete investigation reports for repair and rehabilitation projects.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 1 1 2 1 2 3
2 1 2 1 1 1 3 2
3 2 1 1 1 1 2 2
4 1 2 1 1 1 1 3
Course Content
Introduction to Rehabilitation: An overview of present repair practices, distress
identification and repair management, Causes of distress in concrete structures, Permeability
of concrete, aggressive chemical agents, durability aspects, Condition Survey-
Definition, objectives, different stages-Preliminary inspection, planning stage, visual
inspection, field laboratory testing stage, consideration for repair strategy.
Non Destructive and Destructive Testing Methods: Non-Destructive evaluation tests -

Concrete strength assessment - Rebound hammer test - Ultrasonic pulse velocity tests,
penetration resistance, pull out tests, core sampling and testing, Chemical tests,
Carbonation tests and chloride content, Corrosion potential assessment, cover meter survey,
half-cell potentiometer test, resistivity measurement;
Evaluation of Structural properties: structural integrity and soundness assessment,
interpretation and evaluation of results, Evaluation of reserve strength of existing structures,
analysis necessary to identify critical sections;
Repair materials and Selection of repair materials for concrete-Essential parameters for
repair materials-Strength and durability aspects, cost and suitability aspects, Materials
for repair-Premixed cement concrete and mortars, polymer modified mortars and concrete,
epoxy and epoxy systems including epoxy mortars and concrete, polyester resins, coatings,
Repair/ Rehabilitation methods and strategies: Rehabilitation and retrofitting

methods-repair options, performance requirements of repair systems, important factors
to be considered for selection of repair methods, Repair stages, Guniting, shotcreting,
polymer concrete system, reinforcement replacement, strengthening concrete by surface
impregnation, polymer and epoxy overlays, Resin/polymer modified slurry injection, plate
bonding technique, ferrocement jacketing, RCC jacketing, propping and supporting, fiber
wrap technique, foundation rehabilitation methods, chemical and electrochemical method of
repair, Repair/Rehabilitation strategies- Stress reduction technique, repair and strengthening
of columns and beams, base isolation, rehabilitation of bridges, pavements;
Demolition Techniques - Engineered demolition methods - case studies
Text books:
1. Maintenance Repair and Rehabilitation & Minor works of Building, Varghese. P. C,
Prentice Hall India Pvt. Ltd, 2014
2. Structural Health Monitoring, Repair and Rehabilitation of Concrete Structures,
Ravishankar K. Krishnamoorthy T. S, Allied Publishers, 2004
3. Rehabilitation of Concrete Structures, Vidivelli B, Standard Publishes Distribution.1st
edition, 2009
4. Concrete Technology- Theory and Practice, Shetty. M. S., S. Chand and Company,
2008
Reference books:
1. CPWD Handbook on Repair and Rehabilitation of RCC buildings, Govt. of India
Press, New Delhi
2. Learning from failures - Deficiencies in Design, Construction and Service,
Raikar, R.N. R and D Centre (SDCPL), Raikar Bhavan, Bombay, 1987
3. Forensic Structural Engineering HandBook Robert T. Ratay, McGraw Hill, 2nd
edition, 2010
4. Concrete Structures, Materials, Maintenance and Repair, Denison Campbell, Allen
and Harold Roper, Longman Scientific and Technical UK, 2011
5. Concrete Bridge Practice: Construction, Maintenance and Rehabilitation, Shroff
Publishers and Distributors Pvt. Ltd.; 1st edition, 2005
6. Handbook on seismic retrofit of buildings, A. Chakrabarti, Devdus Menon, Amlan K.
Sengupta., Narosa Publishing House, 2010
CE354U(C): PRESTRESSED CONCRETE
Course Description
This course is intended to provide the engineering student with the basic tools required to
design and build prestressed concrete structures. Emphasis will be placed on the behavior of
prestressed concrete under load along with potential failure mechanisms
Course Objectives
1. To prepare civil engineering graduates who can analyze and design prestressed
2. To study concept of pre-stressed concrete methods of pre-stressing along with its
advantages
3. To study concept of analysis & design of Pre-stressed concrete sections
4. To understand various aspects of maintenance and rehabilitation of prestressed
concrete structures
Course Outcomes
1. comprehend the concept of prestress and losses in prestress
2. appraise the prestressed flexure section for strength and deflection using limit state
method
3. evaluate the losses in prestressed system
4. design the prestressed concrete beams and the pre-stressed and post-tensioned
concrete slabs
5. understand maintenance and rehabilitation of prestressed concrete structures
PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 1 2 1 3
2 1 1 2 2 1 2 2
3 2 2 3 2 2 2
4 2 3 2 2 1 3
5 2 2 1 2 2

Course Content
Introduction to prestressed concrete

Introduction to basic concept and general principle of prestressed concrete, materials used in
prestressed concrete, prestressing systems, concepts of prestressing, losses in prestress, cable
profile and cable zone.
Analysis of prestressed concrete
Analysis of prestressed concrete section for flexure, philosophy of limit state design for
prestressed concrete members, efficiency of a section, permissible stresses in concrete and
steel, deflections of prestressed concrete members, Anchorage zone stresses in prestressed
concrete members
Losses in Prestressed systems

Introduction to prestressed losses and its Significance, Estimation of prestressed losses in
pretensioned and post tensioned systems as per IS code.
Design of prestressed concrete beams

Design of post tensioned prestressed concrete simply supported rectangular and flanged
sections for flexure, shear, bond and bearing including end block.
Design of prestressed concrete slabs

Design of one way and two way pre-tensioned and post tensioned slabs
Maintenance and rehabilitation of prestressed concrete structures

General aspects of maintenance and rehabilitation. Inspection of structures. Use of NDT
equipment’s in the inspection. Cracks in prestressed concrete structures- remedy and repair.
Repair and rehabilitation of prestressed concrete structures. Strengthening of prestressed
Text books:
6. Prestressed Concrete, N. Krishna Raju, Tata McGraw Hill Publication Co., 6th edition,
2018
7. Prestressed Concrete, S. Ramamrutham, , Dhanpat Rai and Sons, 2003
Reference books:
1. Design of Prestressed concrete structures, T. Y. Lin, John Wiley Publishers, 1981
2. Prestressed Concrete, Y. Guyon, , Contractors Record Ltd.,1960
3. Prestressed Concrete, R. H. Evans and E.W. Bennett, , McGraw Hill Book Co, 1990
4. IS: 1343-2012: Indian Standard code of practice for Prestressed concrete, BIS, New
Delhi.
CE354U(D) IRRIGATION SYSTEMS
Teaching Scheme: 03L Total:3Hr Credit: 03
Course Description
This course consists of irrigation scheduling, water allocation, water laws and various
conveyance systems. It also cover design of head regulator, planning and design of lift, drip
and sprinkler irrigation system.
Course Objectives
1. To know the irrigation scheduling, water lows.
2. To design water conveyance system.
3. To study design of head regulator
4. To design the various irrigation systems like drip, sprinkler and lift.
Course Outcomes
1. able to apply laws related to water in field
2. able to design the cross drainage work.
3. able to identify the suitable irrigation method for various types of field

PO PSO
CO 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 2
2 3 3 1
3 2 2 2
Course Content
Planning of an Irrigation System, Irrigation Scheduling, Groundwater Management,

Conjunctive Use of Surface and Subsurface Water Resources, Principles of Law Applied to
Water Rights and Water Allocation, Water Laws. Environmental Protection Law
Introduction to Bandhara, percolation tank, KT weir.
Water Conveyance System: Open channel, Lined and unlined channels, types of lining,
economics of lined channels. Cross drainage works, Regulating structures, Types of CD
works, Aqueduct, Super passage, siphon, culverts etc. Layout and design concepts
Head Regulator, Cross regulator, their layout, and hydraulic design, Conveyance through
closed conduit system, elements, Controlling devices, general design concepts
Lift Irrigation: General concepts, Elements of lift irrigation system, Design considerations
involved in Intake well, Jack well, rising main, and distribution system, Concepts and
economics.
Drip irrigation, General concept, Advantages, limitations, elements of drip irrigation system,
design.
Sprinkler irrigation, General concept, advantages and limitations, Components of the system,
types of sprinklers, design concept.
Text Books
1. Irrigation: Theory and Practice, Michael, A. M., Vikas Publishing House Pvt. Ltd.
New Delhi, 1990
2. Irrigation and Water Resources Engineering, Asawa, G.L, New Age International
Pub. Co., New Delhi, 2005
Reference Books
1. Irrigation, Water Resources and Water Power Engineering, Modi P.N., Standard Book
House, Delhi, 8th edition, 2010
2. Irrigation Engineering and Hydraulic Structures, Garg S.K., Khanna Publishers,
Delhi. 1998
3. Irrigation and Water Power Engineering, Punmia B. C., Pande B. B., Lal, Ashok
Kumar Jain, Laxmi Publications Pvt. Ltd., New Delhi, 1999
CE355U(X): INDUSTRIAL POLLUTION AND CONTROL
Course Description
The students will be elucidating latest developments in water and wastewater management
practices in diverse pollution sources including industries. The rules and regulation for
various pollution and standards will be understood by students. The characterization and
classification of different types of wastes will be understood by student along with existing
norms for waste disposal. It will also explain air pollution and its remedies of control.
Course Objectives
1. To give an understanding of different pollutant of various industry
2. To expose the student to various rules and regulation of pollutions.
3. To know treatment technologies for water/wastewater/solid waste
4. To know air pollution and its control methods.
5. To understand hazardous waste management
Course Outcomes
1. characterize and classify of different types of industrial waste.
2. know fundamentals treatment methods of specific pollutant arising out of industrial
process.
3. be able to understand various concepts of water efficiency and waste minimization in
industrial sectors.
4. understand air pollution control methods.
5. identify the waste management system for hazardous waste.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 3 1
2 3 2 2 2
3 2 2 2
4 2 2 2
5 3 2 2 2
Course Content
Classification of Industries: Major industries responsible for water pollution across globe
and in India, water uses in major industries, industrial wastewater survey, sampling
procedures, characteristics of major industries like dairy, sugar, pulp and paper, dye, metal
plating, textile, petroleum, refineries, slaughterhouse, tannery, distillery etc. as per IS codes.
Benefits of water pollution control by doing treatment of industrial waste.
Rules and Regulation: Treatment prescribed by IS codes for major industries like dairy,
sugar, pulp and paper, dye, metal plating, textile, petroleum, refineries, slaughter house,
tannery, distillery etc., importance of flow equalization, segregation of waste streams-
specific applications. Environmental legislations in India, salient features of water pollution
prevention act and air pollution control act, and Environmental protection act. Constitution of
pollution control boards and their functioning.
Water Minimization Techniques: Concept of reduce, recover, reuse and recycle in

industries, housekeeping and its importance, optimization of industrial processes keeping in
view the waste water generation and treatment, integrated approach for industrial water and
waste water management, concept of CETP, industrial ecology, water quality index and its
application and industrial wastewater management, application of advance wastewater
treatment technology- reverse osmosis(theory, application and design), adsorption- (theory,
application and design including kinetic modeling ), low cost sorbents.
Air Pollution: Parameters influencing air pollution, measurement of parameter plume

behavior, transport and diffusion, stack height design and problems, Gaussian diffusion
model for finding ground level concentration. Device and method used for sampling.
Ambient air quality standards and emission standards. Effect of air pollution, cost/benefit
ratio, Optimization.
Odors: Sources, measurement and control.
Hazardous Waste Management: Classification and their sources, health hazards, handling
of toxic and radioactive wastes. Industrial solid waste sampling plan, characterization,
disposal of waste from thermal power plant, disposal of solid organic industrial waste, toxic
and hazardous waste. Disposal of waste by land filling, site selection, leachate and gas
collection, lining; composting of waste, methods, factors affecting, Incineration, types,
energy recovery and products of incineration, Processing of waste for useful products
pyrolysis, RDF, TDF, Legislation and regulatory trends.
Text Book:
1. Industrial Waste Water Treatment, A. D. Patwardhan, Prentice Hall of India Private
Limited, 2008
2. Environmental Pollution Control Engineering, C. S. Rao, New Age International (P)
Ltd., 2nd edition, 2006
3. Waste Water Treatment, M. N. Rao and A. K. Datta, Oxford& IBH Publication, 3rd
edition, 2009
4. Solid Waste Management, Collection, Processing and Disposal, A. D. Bhide and B.
B. Sundaresan Mundrashilp Offset Printers, Nagpur, 2001
Reference books:
1. Introduction to Environmental Engineering and Science, G. M. Manster, P. E.
Wendell, , Pearson Education Limited, 3rd edition, 2013
2. Air pollution, M. N. Rao and H. V. N. Rao, Tata McGraw Hill Publishing Company
Limited New Delhi, 26th reprint, 2007
3. CPHEEO Manual on Municipal Solid Waste Management CPHEEO, MoUD GoI,
New Delhi, May 2000
4. Pollution Control in Process Industries, S. P. Mahajan, Tata McGraw-Hill, 22nd
reprint, 2008
5. Solid Waste Engineering, A. P. Vesilind, W. A. Worrell, Reinhart, Thomson Book
Cole., 2nd edition, 2002
6. Integrated Solid Waste Management Engineering Principle and Management Issue,
G. Techobanaglous, H. Theisen, S. A. Vigil, Tata McGraw Hill, New York,
International Editions Civil Engg. Series, 1993
7. Industrial Wastewater Treatment: A Guide Book, Edwards Joseph D., CRC Press
Publications, 1995
8. Air Pollution Control Theory, Crawford, M., TMH, 1976
Important Links:
1. www.cpcb.nic.in.
2. www.mpcb.gov.in.
3. www.moef.nic.in/legis/water/wat1.html.
4. www.moef.nic.in/legis/air/air1.html.
5. envfor.nic.in/legis/env/env1.html.
CE355U(Y): SAFETY AND DISASTER MANAGEMENT
Course Description
The overall aim of this course is to provide broad understanding about the basic concepts of
safety and Disaster Management. Further, the course introduces the various natural hazards
that can pose risk to property, lives, and livestock, etc. and understanding of the social
responsibility as an engineer towards preparedness as well as mitigating the damages
Course Objectives
1. To understand different types of hazards and disaster
2. To understand the challenges posed by disasters
3. To know the policy, planning and institutions for disaster mitigation
Course Outcomes
Upon successful completion of this course the students will be able:
1. to understand categories of hazards and disasters
2. to understand the application of the policy, planning and institutions for disaster
mitigation.
3. to understand management technique to make community awareness

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 3 2 3 2 3 3
2 2 3 2 3 2 3 2 3
3 2 3 2 3 2 3 2
Course Content
Hazards and Disasters: Definition of hazards, disasters, difference between hazard and
disaster, Concept of risk and vulnerability, Risk reduction: preparedness and mitigation,
Disaster management cycle, Personal and community awareness, Types of disasters,
earthquake, Tsunami, Landslide, cyclone, flood, drought, forest fire, Chemical and industrial
accidents.
Earthquakes: Definition and concept, intensity, Richter’s scale, Element of risk, Hazard
Zones in India, Typical effects, Main mitigation strategies, safe Engineering practice, Indian
Standard code and enforcement Bye-Laws.
Tsunami: Definition concept, Onset, type and cases, Warming, Elements at risk, Typical
effects: Physical damage, environmental damage, casualties and Public health, Specific
preparedness: Hazard mapping, early warning systems, Community preparedness, Main
mitigation strategies: Site planning and land management, Engineering structures, Flood
management.
Landslides: Definition, concept, Onset time and warning, Causes, Elements at risk, Hazard
zones and Indian landslides, Typical effects: Physical damage, casualties, Main mitigation
strategies: Hazard mapping, Landslide practice, retaining walls, Surface drainage control
works, Engineering structures, Community based mitigation.
Cyclones: Definition, concept, Onset type, Warning, Elements at risk, Typical effects, Indian
Hazard Zones, Main mitigation strategies: Hazard mapping, Land use control, Engineering
Structures, Flood management, improving vegetation cover, Community based mitigation.
Floods: Definition, concept, Onset type, Warning, Elements at risk, Hazard zones and Indian
floods, Typical effects: Physical damage, Casualties and Public health, Crops and flood, Main
mitigation strategies: Mapping of the flood prone areas, land use control, Flood control and
management, Community based mitigation.
Droughts: Definition, concept, Onset type and warning, Elements at risk, Typical effects,
Main mitigation strategies: drought monitoring, water supply augmentation and conservation,
Drought Planning.
Forest Fire: Definition and concept, Forest fire damages in India, Operational fire
management systems and organizations, Community involvement, Public policies concerning
fire, the needs of fire management.
Other type of Hazards and disasters: Chemical and Industrial disasters: brief description,
effects, preparedness, Epidemic: Onset type, warning, causes and effects, risk reduction
measures,
Heat waves: definition, dangers and effects, Forecasts and warning, awareness.
Policy, Planning and Institutions for disaster mitigation: Role of policy makers in disaster
risk reduction, course for specific action, Institutional arrangement in India: Central level,
State Level, District and Block level, Major institutions in National and State level.
Text books:
1. Natural Hazards and Disasters, Donald and David Hyndman, Brooks /Cole Cengage
Learning, 3rd edition, 2011
2. Disaster Management: Approaches & Strategies, Tej Singh, Akansha Publishing
House, 2006
3. Towards Basics of Natural Disaster, D. K. Sinha, Researchco Book Centre/Star
Educational Books Distributor Pvt. Ltd, 2006
4. Management of Natural Disasters in developing countries, H.N. Srivastava & G.D.
Gupta, Daya Publishers, Delhi, 2006
Reference books:
1. Manual on natural disaster management in India, M C Gupta, NIDM, New Delhi

2. Encyclopedia of disaster management, Vol I, II and IIIL Disaster management policy
and administration, S L Goyal, Deep & Deep, New Delhi, 2006
3. Disaster Management Act 2005, Publisher by Govt. of India
4. Disasters in India Studies of grim reality, Anu Kapur, Neeti Meeta; Deeptima;
Roshani and Debanjali, Rawat Publishers, Jaipur, 2005
5. BIS Codes:- I.S 1893, I.S.4326,I.S.13920,NBC
CE356U: DISASTER PREPAREDNESS & PLANNING MANAGEMENT
Course Description
The overall aim of this course is to provide broad understanding about the basic concepts of
Disaster Management with preparedness as a Civil Engineer. Further, the course introduces
the various natural hazards that can pose risk to property, lives, and livestock, etc. and
understanding of the social responsibility as an engineer towards preparedness as well as
mitigating the damages.
Course Objectives
1. To understand basic concepts in Disaster Management
2. To understand definitions and terminologies used in disaster management
3. To understand types and categories of disasters
4. To understand the challenges posed by disasters
5. To understand impacts of disasters key skills
Course Outcomes
Upon successful completion of this course the students will be able:
1. understand categories of disasters and realization of the responsibilities to society
2. apply knowledge of disaster concepts for planning management
3. analyze relationship between development and disasters.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 3 1 3 3 2 2 1 3
2 2 2 3 1 3 3 2 2 2 2
3 2 2 2 3 1 3 3 2 2 2 2
Course Content
Introduction: Concepts and definitions: disaster, hazard, vulnerability, risk severity,

frequency and details, capacity, impact, prevention, mitigation
Disasters: Disasters classification; natural disasters (floods, draught, cyclones, volcanoes,

earthquakes, tsunami, landslides, coastal erosion, soil erosion, forest fires etc.); man-made
disasters (industrial pollution, artificial flooding in urban areas, nuclear radiation, chemical
spills, transportation accidents, terrorist strikes, etc.); hazard and vulnerability profile of
India, mountain and coastal areas, ecological fragility.
Disaster management: Financing relief expenditure, legal aspects, rescues operations,

casualty management, risk management emergency management programme: administrative
setup and organization. hazard analysis, training of personnel, information management,
emergency facilities and equipment necessary
Public awareness & management: creation, preparation and execution of the emergency
management programme, role of safety officers, awareness committee
Disaster Risk Reduction (DRR): Disaster management cycle – its phases; prevention,
mitigation, preparedness, relief and recovery; structural and non-structural measures; risk
analysis, vulnerability and capacity assessment; early warning systems, Post disaster
environmental response (water, sanitation, food safety, waste management, disease control,
security, communications); Roles and responsibilities of government, community, local
institutions, NGOs and other stakeholders; Policies and legislation for disaster risk reduction,
DRR programmes in India and the activities of National Disaster Management Authority.
Disasters, Environment and Development: Factors affecting vulnerability such as impact

of developmental projects and environmental modifications (including of dams, land use
changes, urbanization etc.), sustainable and environmental friendly recovery
.
Text books:
1. Disaster Risk Reduction in South Asia, Pradeep Sahni, Prentice Hall India Learning
Private Limited, 2004
2. Disaster Management, Ghosh G. K., , APH Publishing Corporation, 2006
Reference books
1. Handbook of Disaster Management: Techniques & Guidelines, Singh B.K., Rajat
Publication, 2008
2. Disaster Preparedness and Management, Michael Beach, F.A. Davis Company, 1st
edition, 2010
Important Links:
1. http://ndma.gov.in/ (Home page of National Disaster Management Authority)
2. http://www.ndmindia.nic.in/ (National Disaster management in India, Ministry of
Home Affairs)
CE357U GEOTECHNICAL ENGINEERING LAB
Course Description
The student will be able to determine the index and engineering properties of soil. It will
helpful to understand soil classification and its engineering behavior. The student will able to
understand the process of determining different engineering properties. The field visit will
enhance the actual field experience about geotechnical engineering.
Course Objectives
1. To study geotechnical engineering practices for soil.
2. To perform and interpret laboratory tests for evaluating engineering properties of soil.
3. To carry out field investigations and to identify soils.
4. To able to collect the sample from field and conduct various laboratory tests on soil.
Course Outcomes
1. identify and classify the soil
2. be able to perform laboratory compaction test and in-place density tests for quality
control.
3. be able to determine permeability characteristics of soil.
4. determine the shear strength and compressibility characteristics of soil

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 3
2 3 1 2
3 3 1 1 3
4 3 2 3 3

CE352U. Any four from group A, three from group B and one from group C. List given
below is just a guideline.
1. Physical / Index Property Tests on Soils

a. Determination of water content by various methods
b. Determination of the particle size distribution for a given soil
c. Determination of specific gravity by pycnometer method
d. Determination of liquid limit , plastic limit and shrinkage limit
e. Determination of field dry density by core cutter method, sand replacement
method and clod method
f. Determination of free swell index
2. Engineering Property Tests on Soils
a. Determination of compaction characteristics of soils by Standard & Modified
Proctor's test
b. Determination of co‐efficient of permeability by constant head and falling
head permeability test.
c. Determination of shear strength parameters of soil by direct shear test
d. Determination of shear strength parameters of soil by triaxial test
e. Determination of shear strength parameters of soil by unconfined compression
test
f. Determination of shear strength parameters of soil by vane shear test.
g. Determination of coefficient of consolidation by one dimensional
consolidation test
3. Mini Project work
a. A visit to construction site of road, foundation, embankment, earth dam etc.
b. Use of virtual laboratory tool for various tests.
c. Collection of soil sample from field by augur, sampling tube or boring and its
preparation as soil sample for different tests.
Note:
practical and its regular assessment. In addition; it shall be based on
knowledge/skill acquired and record submitted by student (journal) based on
practical performed by him/her. The performance shall be assessed experiment wise
using internal continuous assessment format (S 10).
CE358U: DESIGN OF STEEL STRUCTURES LAB
Evaluation Scheme: 25 ICA + 25ESE Total Marks: 50
Course Description
The students admitting in Civil Engineering discipline have to understand the different
loadings coming on steel structural components. Also, they should be able to design of steel
structures. This course will give exposure to students to design of steel structural
components.
Course Objectives
1. To understand various loadings coming to on the steel structures.
2. To apply design philosophy for steel structures.
3. To understand drawings of steel structures.
4. To make use of relevant IS codes for Design of Steel Structures.
Course Outcomes
1. calculate design loads for various steel structures.
2. design simple steel structures.
3. design simple steel connections.
4. draw details of steel structures.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 3
2 3 1 3 2
3 3 3 2
4 3 1 1 3 2
The experiments shall be performed to cover entire curriculum of course CE353U. The
list given below is just a guideline.
A. Design of following structures as per IS 800- 2007

1. G+1 Industrial building with roof supported by steel trusses (Angle sections / Tubular
Sections).
a. Design of primary and secondary beams
b. Design of columns and footing
2. Design of Roof Truss :
a. Loading on Roof Truss
b. Analysis for Member Forces
c. Design of Truss Members
d. Design of Column and Column footing
B. Design of Welded Plate Girder
a. Analysis of girder due to various loading
b. Design of girder.
C. A Report on Site visit.
The Term work should include

1. Brief Technical design project report involving: Introduction, assumptions, load
calculations, analysis, preferably using suitable software and detailed design.
2. Drawings: Structural plan and detailed structural drawings
3. Report of a site visit mentioning structural details with relevant sketches of structural
connections.
Note:
CE359U(A): ADVANCED SURVEYING LAB
Course Description
This course provides the skill of using advanced surveying equipment such as digital level,
digital theodolite, and Total station for leveling, surveying and using software for storing data
and developing maps by using software.
Course Objectives
1. Setting out curves by various methods
2. Apply the knowledge and skills of advanced surveying equipments for leveling and
surveying for preparation of plans/maps.
3. Use of a current widely-used GIS computer software system. for geographic data
entry and editing, spatial analysis, and map development and display
Course Outcomes
1. acquire the skill of using advanced surveying equipments such as digital level, digital
theodolite and total station
2. apply the knowledge of photogrammetry GIS and Remote Sensing for surveying and
preparation of plans/maps.
3. use of a current widely-used GIS computer software system for geographic data
entry and editing, spatial analysis, and map development and display.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 2
2 3 2 2 2 3
3 2 3 2 2 3
The experiments shall be performed to cover entire curriculum of course CE354U(A).

The list given below is just a guideline. All surveying equipment’s should be introduced
and used before experiments.
SETTING OUT CURVES:

1. Setting out a simple circular curve by offsets from long chord
2. Setting out a simple circular curve by Rankine’s method of tangent angle (Deflection
angles)
DIGITAL LEVEL:
1. Conduct profile leveling along the given alignment for a road using digital level and
Plotting the profile of the alignment surveyed
2. Transferring leveling data to computers and developing and printing leveling pages
using software.
DIGITAL THEODOLITE:
1. Traversing and plotting : Setting out a closed traverse with minimum 6 sides and
entering the field data using Total station, Plotting the traverse and checking the error
of closure
2. Setting out an open traverse with minimum 5 sides using total station and entering the
field data and Plotting the traverse
TOTAL STATION:
1. Measuring horizontal and vertical angles, Prolonging a given straight line,

Determination of magnetic bearing of given straight lines
2. Traversing and plotting : Setting out a closed traverse with minimum 6 sides and
entering the field data, Transferring the data to computers using software, Plotting the
traverse using software
USE OF GIS & GPS SOFTWARE:
1. Use of any one GIS/GPS software for various surveying applications etc.
USE OF MOBILE APPS:

1. Use of mobiles apps for various surveying applications
Note:
2. ICA – Internal Continuous Assessment shall support for regular performance of
3. ESE – The End Semester Exam for this course shall be based on oral examination
to judge the skills acquired by student. It shall be evaluated by two examiners out
of which one examiner shall be out of institute.
CE359U(B): REHABILITATION OF STRUCTURES LAB
Course Description
This course deals with the repair and rehabilitation of buildings and covers the following
topics: introduction to the assessment of deterioration of concrete structures; repair and
materials and strategies; compatibility aspects; durability and repair audits; methods and
materials for rehabilitation of buildings.
Course Objectives
1. To acquire the knowledge on Quality of concrete, durability aspects
2. To understand causes of deterioration
3. To know assessment of distressed building structures
4. To understand rehabilitation methods and materials for rehabilitation of buildings
Course Outcomes
1. understand, suggest and apply different methods of rehabilitation for improving
structural performance
2. analyze a building and prepare an investigation report for repair and rehabilitation of
buildings.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2 1 2 2
2 2 1 1 2 1
Minimum eight experiments / demonstration shall be performed to cover entire

curriculum of course CE CE354U (B). The list given below is just a guideline.
1. Concrete strength assessment by Rebound hammer test / Ultrasonic pulse

velocity tests
2. Carbonation tests and chloride content
3. Half-cell potentiometer test
4. Corrosion potential assessment
5. Condition assessment of deteriorated/dilapidated building and preparing report for
suggesting repair and rehabilitation methods and materials
6. Tests on concrete repaired by using FRP wrapping.
7. Tests on fiber reinforced concrete.
8. Case study of repairs and rehabilitation of buildings bridges
9. Visit to site of rehabilitation / retrofitting of buildings and preparing report.
Note:
CE359U (C) PRESTRESSED CONCRETE LAB
Teaching Scheme : 02P, Total: 02 Hr Credit: 01
Evaluation Scheme : 25 ICA + 25 ESE Total Marks: 50
Course Description
The students will learn how to perform various tests to be used at construction site. They will
also learn how to conduct various type of prestressed concrete materials and methods to be
used at site. At the end they will learn prestressed concrete design.
Course Objectives
1. To prepare civil engineering graduates who can analyze and design prestressed
concrete structures
2. To use IS: 1343 in the design of prestressed concrete structures.
3. To study concept of pre-stressed concrete methods of pre-stressing along with its
advantages
4. To study concept of analysis & design of Pre-stressed concrete sections
5. To study various types of losses.
6. To understand various aspects of maintenance and rehabilitation of prestressed
concrete structures
Course Outcomes
1. understand the concepts of pre-stressing in concrete structures and identify the
materials for prestressing
2. analyses a Pre-stressed Concrete section
3. estimate losses of pre-stressing
4. design pre-tensioned and post tensioned girders for flexure and shear
5. design continuous pre-tensioned and post tensioned beams

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 2 2 2 1 1 3
2 1 2 2 1 1 1 2 2
3 2 2 1 3 2 1 2 2
4 2 3 2 2 1 1 3
5 2 1 2 2 3
Minimum five designs / experiments shall be performed to cover entire curriculum of

course CE354U(C). List given below is just a guideline.
1. Design of prestress concrete beam (Neglecting losses and Allowing losses)

2. Design of pre tensioned / post tensioned prestressed concrete beam (T beam and
rectangular beam)
3. Design and detailing of post tensioned bridge girder.
4. Design of End block with detailing.
5. Design and detailing of prestress concrete cylinder/ non cylinder pipe
6. Design and detailing of post tensioned slab
7. Design and detailing of composite prestress concrete beam
8. Design and detailing of composite prestress concrete slab
9. At lest one site visit to prestressed concrete plant with reports
Note:
 ICA – Internal Continuous Assessment shall support for regular performance of practical
and its regular assessment. In addition; it shall be based on knowledge/skill acquired and
format (S 10).
CE359U(D) IRRIGATION SYSTEMS LAB
Course Description
This course gives idea for the students about the selection of suitable irrigation method like
lift irrigation, drip irrigation and sprinkler irrigation and design of various cross drainage
work and head regulator.
Course Objectives
1. To design of Cross drainage work
2. Design of head regulator
3. Design of irrigation system like lift, drip and sprinkler.
Course Outcomes
1. design suitable cross drainage work for the field.
2. design of head regulator.
3. apply the knowledge of design and selection of irrigation system in field
PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2
2 3 2 3
3 1 2 3
Minimum six experiments shall be performed to cover entire curriculum of course

CE354U(D). List given below is just a guideline.
1. Design of Bandhara / KT weir from the given data

2. Design of Aqueduct
3. Design of culverts
4. Design of head regulators
5. Design of closed conduit system
6. Design of lift irrigation system
7. Design of drip irrigation system
8. Design of sprinkler irrigation system
9. Field visit to any of the above structure/system
Note:
acquired and
format (S 10)
CE 360U: SOFTWARE ENGINEERING LAB
Course Description
Use of the computer for both analysis and design is an integral part of the curriculum. This
course is aimed in providing hands-on work using analytical tools contained in common
software programs to solve civil engineering problems.
Course Objectives
1. To teach the students to understand the details of different structural analysis and
design softwares such as STAAD-Pro, SAP2000, ETABS etc.
2. To enable students to understand and used different softwares used in Civil
Engineering.
Course Outcomes
1. understand and apply knowledge for analysis and design of structures using different
structural analysis and design softwares such as STAAD-Pro, SAP2000, ETABS etc.
2. understand and apply knowledge for using different softwares used in Civil
Engineering.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 3 3 1 1 1 3 2
2 2 1 2 2 1 1 3
Minimum two software from each group shall be performed. The list given below is just
a guideline.
Group A
Analysis and design of structure using any one software listed below or otherwise
i) STAAD-Pro
ii) STRUDS
iii) SAP-2000
iv) ETABS
v) ANSYS
vi) Build master
vii) SAFE
Group B:
Solution of problems in any one different areas using software listed below or
otherwise
i) Geotechnical Engineering: GEO5/ OYASYS Slope - 2D slope stability analysis/
MIDAS GTS
ii) Estimating and Surveying- QE-Pro/any other advanced software
iii) AutoCivil
iv) Project Management Software: Microsoft Project/ PRIMAVERA/Contractor
v) Transportation Engineering: Road Master
vi) Remote Sensing and GIS: ArcGIS/GEOMATICA/ERDAS
vii) Environmental Engineering: WaterGEMS, SewerGEMS
viii) Fluid Mechanics: Flowmaster
Note:
CE361U: MINOR PROJECT
Teaching Scheme: 2P Credit: 1
Evaluation Scheme: 50 ICA Total Marks: 50
Course Description
The students admitting in Civil Engineering discipline have to understand working with team
members. Also, they should be able to understand the philosophy behind planning and
execution of the project work. This course will introduce methodology to students for
undertaking and working on project.
Course Objectives
1. Understanding formulation for solving real-life problems.
2. To introduce various strategies for solving real-life problems.
3. Understanding methodology to plan and execute projects.
4. To introduce necessary communication skills for documentation of the solution of the
problem.
Course Outcomes
1. formulate the problem statement.
2. identify resources for solution of the problem.
3. identify appropriate methodology for solving engineering problems.
4. find suitable solution of the problem.
5. communicate solution of the problem.

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 1 2
2 1 1 2
3 1 2 3
4 2 2 1 3
5 1 2 2
Course Content
Each student shall work on an approved project, a group of 05 students (maximum). The
group shall be allotted for the each minor project in the beginning of semester. Minor project
may involve fabrication, design or investigation of a technical problem that may involve
design, experimental or analytical work. The project work shall involve the activities to get
students acquainted with different aspects of surveying, fabrication, design or analysis. Each
group of students is required to maintain separate log book for documenting various activities
of minor project
Note:
ICA – Assessment of the minor project for award of ICA marks shall be done jointly by the
guide and departmental committee upon presentation by student along with model / prototype
/ solution of the problem defined.
CE451U(A): RAILWAY, TUNNEL AND AIRPORT ENGINEERING
Course Description
To provide the basic knowledge of types of rails and its components, Design of Rail
Geometrics, to understand the Layout of an airport and its classification, Design of Runway
and Taxiways and Introduction to tunnel engineering.
Course Objectives
1. Design the geometrics of a Railway Track.
2. To learn the modernizations in railways.
3.To study types of tunnels and methods of tunneling.
4. To study the corrected runway length and taxiway geometrics.
Course Outcomes
1. Calculate stresses in railway track
2. Design the railwaytrack
3. Identify the suitable method of tunneling
4. Calculate the corrected runway length and taxiway geometrics
Relevance of Program Outcomes (Pos) and strength of co-relation

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 2 2
2 3 3 3
3 2 2
4 3 2 2
Railway: Characteristics of railway transport, classification of railway, track standard

terminology, track sections in embankment and cutting, engineering survey.
Railway Track Gauge: Different gauges on indian railways, loading gauge, construction
gauge, unigauge, problems caused by change of gauge.
Track and Track stresses: Requirements, forces acting on track, coning of wheels, tilting of
rails, rails: functions, types of rails, rail joints, rail failure, function suitability and drainage,
treatment, defects, standard rail sections.
Sleeper: Functions, requirements, types of sleepers; concrete sleepers, pre stressed, sleeper
density, manufacturing and spacing of sleepers, ballast: function, specifications of track
ballast, track fittings: fittings and fastening.
Alignment of Railway lines: Importance, basic requirements of an ideal alignment, selection
of a good alignment, geometric design of track: necessity for geometric design, gradients,
grade compensation on curves, super elevation, equilibrium cant, cant deficiency, maximum
permissible Speed, negative super elevation.
Resistance to Traction: Resistance to‐friction, wave action, causes of creep, effects of creep,
measures to reduce creep. speed, track irregularity, wind, gradient, curvature. stress in rails,
sleepers, ballast and formation.
Construction and Track maintenance: Plate laying method, operations involved Tools &
common items of track maintenance.
Points and crossings: Important terms, types of track layouts and sketches of turn out,
diamond crossing, triangle, double junction, scissors cross over, single slip, double slip,
gathering line, signaling and interlocking: objectives of signaling, classification of signals,
CTC and ATC system, interlocking & it’s principles.
Railway Stations and yards: Classification of railway stations, Purpose, facilities required
at railway stations, requirements of station yard, types of yards,
Modernization in railways: Types of railways, high speeds, improvements in track

structure: components, automation, safety aspects, introduction to skybus, monorail & metro
rails.
Tunnels: Necessity, types, advantages and disadvantages of tunnels compared to open

cuts, tunnel alignment, size and shape of tunnels, tunnel lining, drainage, ventilation &
lighting of tunnels, tunneling methods for soft ground and hard ground, method of mucking,
drilling, and blasting.
Airport: Agencies controlling national and international aviation, various surveys to be

conducted, airport, classifications (ICAO), selection of site for airportAirport obstructions:
Zoning laws, imaginary surfaces, approach and turning zone.
Runway and Taxiway Design: Orientation of runway, wind rose diagram, basic runway
length and corrections, runway geometric design standards, drainage, introduction to
pavement design airport layout, terminal area, unit terminal concept, apron, apron layout,
aircraft parking, hangers, environmental guidelines for airport projects, heliports, main
characteristics of helicopters, nature of helicopters transport, site selection for helicopters
Text Books:
1. A Text Book of Railway Engineering, Saxena S. C. & Arora S. P.,7th edition, Dhanpat
Rai Publications(P) Ltd., New Delhi, 2015.
2. Airport Planning & Design, Khanna S. K., Arora M. G. , Jain S. S. , 6thedition,
Nemchand &Bros., Roorkee,2012.
3. A Text Book of Transportation Engineering, S. P. Chandola, S. Chand & Co.New Delhi,
reprint 2008.
4. Tunnel Engineering, S. C. Saxena, Dhanpat Rai Publications(P) Ltd., New Delhi.
Reference Books:
1. Principles of Transportation Engineering, Chakroborty P. and Das A., 1st edition, Prentice
Hall of India, 2009.
2. Transportation Engineering Vol. I & II, V.N. Vazirani & S.P. Chandola, 7thedition ,
Khanna Publishers, New Delhi, 2003.
3. Railway Engineering, Satish Chandra & Agrawal M. M., 2nd edition, Oxford University
Press India, 2013.
4.Harbour, Dock & Tunnel Engineering, Shrinivasan R., 27th revised edition, Charotar
publishing House Pvt. Ltd., 2009.
CE451U (B): GEO-SYNTHETIC ENGINEERING
Course Description
The Civil Engineering Students will introduce and expose to design and analysis of
geosynthetic materials used in geotechnical applications. Geosynthetics provide a design
alternative that has the potential of overcoming a wide variety of difficult site conditions. It
also deals with the manufacturing techniques, and design and construction aspects of
geosynthetics in geotechnical engineering applications. The application of geotextiles,
geogrids, geomembranes geofoam, geotextile tube, in civil engineering are elaborated.
Course Objectives
1. To understand the emerging trends of Geosynthetic in Geotechnical Engineering
2. To evaluate the different properties of geosynthetics by different tests
3. To analyze the functions of geosynthetic and its suitability
4. To design different structures using geosynthetics according to various applications
Course Outcomes
1. identify the type of geosynthetics and their relevance in geotechnical field
2. understand the mechanism of formation of different geosynthetics
3. analyze and compute different properties of geosynthetics
4. apply the knowledge for designing the structures using Geosynthetic materials
Relevance of Program Outcomes (Pos) and strength of co-relation

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 2 3
2 3 2
3 3 2
4 3 2
Course Content
Geosynthetics classifications, functions, applications, raw materials used. Different types of

Geosynthetics, manufacturing, system, Design and sustainability.
Various properties of Geosynthetics, physical properties, mechanical properties, hydraulic

properties & endurance properties,
Mechanism of filtration and drainage functions & their applications,
Erosion control – Wind erosion, Rain water erosion, Use of geotextile, Geotextile beneath
rock rip-rap, Geotextile filters – Design criteria, Construction criteria, Erosion control
measures using Geogrids, Erosion control mattresses, Geotextile silt fences for erosion
control
Pavement construction using Geotextile – Mode of action, design methods, Construction

methods.
Bearing capacity improvement – Soil mass reinforcement geometry, Mechanism, Modes of

failure (Binquet and Lee theory), Foundation on soil with geotextile reinforcement, Design
procedure
Reinforced retaining walls – Geotextile reinforced walls – Construction procedure, Analysis,

Design, Design of gabion walls using Geotextile, Geogrid soil walls – Construction, Design,
Different types of facing elements, construction procedure, cost.
Model for single and multi-layer reinforced slopes, guidelines for design of reinforced slopes,
Design of basal reinforced embankment, placement of Geosynthetics, construction procedure,

widening of existing road embankments.
Consolidation techniques, Development of design chart for prefabricated vertical drains,

ground instrumentation and monitoring, Design of encased stone columns, geocell/geofoam
systems.
Geotextile tubes, geotextile containers, geotextile bags, dewatering waste and contaminated
sediments, installation and design of geotextile tube.
Design of landfill liner, veneer slope stability without and with seismic analysis, run out
length, settlement of landfill, advantage of LSS model.
Applications, advantage, function of geofoam, physical, mechanical and thermal properties of

geofoam, design of embankment using geofoam, geofoam reinforced soil walls, New light
weight fill material.
Text Book:
1. Engineering with Geosynthetics, G.V.Rao and G.V.S.S Raju, Tata-McGraw Hill

Publication, New Delhi, 2004.
2. Reinforced Soil and its Engineering Applications, Swami Saran, I. K. Internationals,
1st edition, 2006.
3. Designing with Geosynthetics, R.M. Koerner, Xlibris Corporation, 6th edition, 2012.
4. Geosynthetics World, Mandal J. N., New Age International, 1st edition, 2010
Reference Books:
1. Construction and Geotechnical Engineering using Synthetic Fabrics, R.M. Koerner

and J.P. Welsh, John Willey and Sons, 1980
2. Construction and Geotechnical Methods in Foundation Engineering, R. M .Koerner,
McGraw Hill Publication, 1985.
3. Fundamentals of Geosynthetic Engineering , Sanjay Kumar Shukla and Jian-Hua Yin,
Taylor and Francis Group UK, 2006
4. Geosynthetics in Civil Engineering, R W Sarsby, Elsevier Science, 2007
5. An Introduction to Geosynthetic Engineering, Sanjay Kumar Shukla, CRC Press,
Taylor & Francis Group, 2016.
6. A Guide to Geotextiles Testing, Mandal J. N. and Devshikar D. G., New Age
International, 1st edition, 2008
7. https://nptel.ac.in/courses/105101143/
CE451U( C) ENVIRONMENTAL GEOTECHNOLOGY
Course Description
The course describes various causes of soil pollution, behavior of the pollutants and its
detection and testing methods. It also outlines the application of geo synthetics in solid waste
management along with current practice for waste disposal.
Course objectives:
1. Understand the causes of soil pollutants and factors affecting soil pollutant interaction
2. Selection and characterization of land fill site
3. Understand the ground water pollution due to transport of contaminant.
4. To study the remediation of contaminated Soils
Course Outcomes:

1. identify the causes for soil pollution and behavior of the pollutants.
2. Characterization of disposal site and waste.
3. evaluate and remediate contaminated sites and monitor to bring natural attenuation

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 3 2
2 2 3
3 2 2
Course Content
Soil- Pollutant Interaction: Introduction to geo environmental engineering, environmental

cycle, sources, production and classification of waste, causes of soil pollution, factors
governing soil-pollutant interaction, Physicochemical behavior and modelling, failures of
foundations due to pollutants.
Characterization, Stabilization and Disposal Safe disposal of waste, site selection for
landfills, characterization of land fill sites, waste characterization, stability of landfills,
current practice of waste disposal, passive contaminant system, hazardous waste control and
storage system, mechanism of stabilization, solidification of wastes, micro and macro
encapsulation, absorption, adsorption, precipitation- detoxification, organic and inorganic
stabilization.
Transport of Contaminants: Contaminant transport in sub surface, advection, diffusion,
dispersion, governing equations, contaminant transformation, absorption, biodegradation, ion
exchange, precipitation, hydrological consideration in land fill design, ground water
pollution, pollution of aquifers by mixing of liquid waste, protecting aquifers.
Detection and Testing Methods: Review of current soil testing concepts, Proposed approach
for characterization and identification of contaminated ground soil for engineering purposes.
Remediation of Contaminated Soils: Rational approach to evaluate and remediate

contaminated sites, monitored natural attenuation, exsitu and insitu remediation,
solidification, bio – remediation, incineration, soil washing, electro kinetics, soil heating,
verification, bio venting. Ground water remediation, pump and treat, air sparging, reactive
well, application of geo synthetics in solid waste management, rigid or flexible liners.
Text Books:
1. Introduction to Environmental Geotechnology, Hsai Yang Fang and John Daniel,

CRC press, Taylor and Francis, 2nd edition, 2013
2. Geotechnical Practice for Waste Disposal, Daniel, B. E., Chapman and Hall, London,
1993
3. Geoenvironmental Engineering – Site Remediation, Waste Containment, Emerging
waste management technologies, Hari D. Sharma and Krishna R. Reddy, John Wiley
and Sons, 2004
Reference Books:
1. Environmental Geotechnics, Robert Sarsby, Thomas Telford, 1st edition, 2000

2. Hazardous Waste Management, Lagrega, M.d., Bukingham, P.L., and Evans, J.C.,
McGraw Hill, Inc. Singapore, 1994
3. Basics of Solid and Hazardous Waste Management Technology, Kanti L. Shah,
Prentice Hall; 1st edition, 1999
4. Advances in Solid and Hazardous Waste Management, Sudha Goel, Springer, Cham,
2017
5. Solid and Hazardous Waste Management: Science and Engineering, M.N. Rao, Razia
Sultana, Sri Harsha Kota, Anil Shah, Naresh Davergave, B S publication, Elsevier,
2017
6. Hazardous Waste Management, Wentz, C.A., McGraw Hill, Singapore, 1989.
CE451U(D) CONSTRUCTION EQUIPMENT AND AUTOMATION
Course Description
In this course students are introduced to modern construction equipment’s, their applications
and the concept of advanced techniques adopted in construction.
Course Objectives
1. To understand different excavating, compaction, earthmoving, pile driving and
pumping equipment’s.
2. To know about the concrete mixing, transporting and placing equipment.
3. To provide knowledge on automation in construction industry.
Course Outcomes
Upon successful completion of this course the students will able to:
1. identify types and capacity of equipment used for excavation
2. select proper compacting and earthmoving equipment
3. identify proper equipment for concrete work, pile driving or pumping
4. apply automation in construction

PO PSO
CO
1 2 3 4 5 6 7 8 9 10 11 12 1 2 3
1 1 3 3
2 3 3
3 3 3
4 3 3
Course Content
Excavating Equipment: Different types of Excavator such as Front shovel, hoes. Their
selection, calculation of shovel production, height & cut of shovel, angle of swing effect on
shovel production, calculation of hoe production, Type of loaders their bucket attachments,
loader production rates, calculation of wheel loader production, equipment for underground
open excavation - Trenchless Technology
Compacting Equipment: Compaction of soil and rock, types of compacting equipment,

roller production estimating, Dynamic compaction
Earthmoving Equipment: Tractors and attachments, dozers and rippers, scrapers , shovels,
draglines, trenching machines, clamshell, hoes, trucks and wagons, dumpers, rollers and
compactors
Pile driving equipment: Types, pile driving hammers, single acting and double acting,
differential acting hammers, hydraulic and diesel hammers, vibratory drivers
Pumping equipment: Reciprocating, diaphragm & centrifugal pumps, well point system.
Concrete mixing, transporting & placing: Concrete compacting equipment, mixers, central
batching and mixing plants, pavers, transit mixers, concrete pumps, shotcrete, Air
Compressor equipment for moving materials, Prestressing jacks and grouting equipment
Material Handling Equipment: Builder’s hoists, Forklifts, cranes, booms, belt-conveyors,

cableways, ropeways.
Automation in construction industry: Advantages of automation in construction industry,

Use of Drones for spread out sites; Use of robots for repetitive activities, Use of 3D printers,
Hundegger, Trimble
Text Books:
3. Construction Planning, Equipment’s and Methods, R. L. Peurify, McGraw Hill
Publication, 2011
4. Construction Equipment and its Planning and Applications, Mahesh Varma,
Metropolitan Book Co. (P) Ltd., New Delhi, India.
5. Construction Equipment & Management, S.C. Khanna, Khanna Publishers, 1988
Reference Books:
6. Construction Equipment and Methods: Planning, Innovation, Safety, Leonhard E.
Bernold, Wiley Global Education, 2013
7. Construction Equipment and Job Planning, S.V. Deodhar, Khanna Publishers, New
Delhi, 1988

Civil Engg - Option II TY Syllabus0

Uploaded by

Copyright:

Available Formats

Civil Engg - Option II TY Syllabus0

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Civil Engg - Option II TY Syllabus0

Uploaded by

Copyright:

Available Formats

Government College of Engineering Jalgaon

“Globally Accepted Engineers with Human Skills”

Civil Engineering Department

L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

Teaching Scheme Evaluation Scheme

L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

CE201U Introduction to Civil Engineering HM 2 -- -- 2 10 30 60 -- --- 100 2

L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

* If students fail in online exam, then ESE will be conducted.

L: Lecture T: Tutorial P: Practical ISA: Internal Sessional Assessment

Programmable Logic Controller Automotive Instrumentation Building Automation

Professional Ethics and Cyber Internet and Communication Internet of Things

Building Construction Practice Environmental Laws and Polices Interior Design

Relevance of Program Outcomes (POs) and strength of co-relation

Principle and types of Arch and Buttress dams.

Gates: Uses, types of spillway crest gates.

1. To understand behavior of structural members under various loadings.

Relevance of Program Outcomes (POs)and strength of co-relation

Design of Dog legged staircase

Relevance of Program Outcomes (POs) and strength of co-relation

Highway Planning and Development: Different modes of transportation, role of highway

Construction of Roads: Types of highway construction, construction of earth roads, gravel

Relevance of Program Outcomes (POs) and strength of co-relation

Boundary Layer Analysis-Assumption and concept of boundary layer theory. Boundary-layer

Uniform Flow-Continuity Equation, Energy Equation and Momentum Equation,

Pumps: Introduction, function and principles, working of centrifugal pump, efficiency of

Relevance of Program Outcomes (POs) and strength of co-relation

Construction Techniques: Development of construction techniques, High rise Building

Construction Practices: Specifications, details and sequence of activities and construction

Super Structure Construction: Common building construction methods (conventional walls

Tunneling: Geotechnical investigations, selection of alignment, methods of tunneling in soft

Bridge Construction: Geotechnical investigation, Site selection, Launching girders, bridge

1. Understanding to the behaviour of structures during earthquake ground motion.

1. identify appropriate earthquake zone for a particular location.

Relevance of Program Outcomes (POs) and strength of co-relation

Earthquakes: Causes of Earthquakes, Nature and Occurrence, Seismic Waves, Effects of

Dynamics of Structures Connections: Modelling of Structures, Lumped Mass Approach,

Masonry Buildings: Categories of Masonry Buildings, Behaviour of Unreinforced and

Reinforced Concrete Buildings: Damage to RC Buildings, Ductile Failure, Concrete

Non-structural Elements: Failure Mechanisms, Effect of Non-structural Elements on

1. Earthquake-Resistant Design of Structures, S.K. Duggal, Oxford University Press, 2nd

Upon successful completion of this course the students will:

Relevance of Program Outcomes (POs) and strength of co-relation

Architectural design: Review of Architecture, Site selection, climatic conditions, sun

Anthropometrics Data: Relation of human measurement to furniture and movement to

Interior materials: Different interior materials, paneling, partitions, finishing materials,

Relevance of Program Outcomes (POs) and strength of co-relation

1-Weakly correlated 2 – Moderately correlated 3 – Strongly correlated

Building finishes: Plaster, properties of good plaster, preparation of surface, methods of

Doors and windows, - Location, function, various types.

Plumbing works in buildings;

Termite proofing: pre and post construction treatment;

Relevance of Program Outcomes (POs) and strength of co-relation

Introduction to Rehabilitation of Buildings: An overview of present repair practices for

Non Destructive and Destructive Testing Methods: Non-Destructive evaluation tests -

Repairs and Rehabilitation methods : Rehabilitation and retrofitting methods-repair

Relevance of Program Outcomes (POs)and strength of co-relation

Construction project planning: Stages of project planning: pre-tender planning, pre-